Chaudhary Ranbir Singh University Tender

CORNER TABLE - 680 x 680 x 400mm (H) Providing and placing 12mm thick toughened glass top centre table supported on white oak wood frame made to shape as per drawing. Glass top will have 65mm wide ceramic white paint band. Wood members shall be finished in PU polish, complete in all respect to be manufactured strictly as per Drawing no. F-04.

CENTRE TABLE - 680 x 1350 x 400mm (H) Providing and placing 12mm thick toughened glass top centre table supported on frame made of 12mm commercial ply finished with 4mm white oak veneer on both face, made to shape as per drawing. Glass top will have 65mm wide ceramic white paint band. Wood members shall be finished in PU polish, complete in all respect to be manufactured strictly as per Drawing no. F-04.

DINING TABLE - 2100 x 900 x 750mm (H) Providing and placing Dining Table. Table top shall have 1.0mm thick laminate over 25mm(19+3+3) thick commercial ply with white oak edging/ lipping made to shape as per drawing, adequate vertical 16 gauge SS pipe 75 x 75mm supported on base of twin 16 gauge SS pipes of 50 x 50mm to support the top framing members of 16 gauge SS pipe of 50 x 50mm, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-05.

CENTRE TABLE - 680 x 1200 x 400mm (H) Providing and placing 12mm thick toughened glass top centre table supported on white oak wood frame made to shape as per drawing. Glass top will have 65mm wide ceramic white paint band. Wood members shall be finished in PU polish, complete in all respect to be manufactured strictly as per Drawing no. F-06B.

CORNER TABLE - 680 x 680 x 400mm (H) Providing and placing 12mm thick toughened glass top centre table supported on white oak wood frame made to shape as per drawing. Glass top will have 65mm wide ceramic white paint band. Wood members shall be finished in PU polish, complete in all respect to be manufactured strictly as per Drawing no. F-06B.

DRESSING TABLE - 1800 x 570 x 750mm (H) Providing and placing Study table fabricated out of 4mm white oak veneer over 25mm (19+6mm) thick commercial ply table top with white oak edge lipping made to shape as per drawing & to be finished in PU Polish. The drawer shall be fitted with drawer slides, handles, locks etc. of approved make. The top shall rest upon 25 x 75mm Hard wood members fixed to white oak wooden legs made to shape as per drawing, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-06C.

CENTRE TABLE - 1200 x 1200 x 400mm (H) Providing and placing 12mm thick toughened glass top centre table supported on white oak wood frame made to shape as per drawing. Glass top will have 65mm wide ceramic white paint band. Wood members shall be finished in PU polish, complete in all respect to be manufactured strictly as per Drawing no. F-06D.

DINING TABLE - 1800 x 900 x 775mm (H) Providing and placing dining table. Table top shall have 8mm thick toughened glass top over 4mm thick decorative white oak veneer over 25mm (19 + 6mm) thick commercial ply with 6mm thick white oak wood lipping made to shape as per drawing and white oak wood square tapered wooden legs (75 x 75 mm at top and 50 x 50 mm at bottom), all exposed wooden/veneer work shall be finished in PU Polish, complete in all respects to be manufactured strictly as per Drawing no. F-06E.

CENTRE TABLE - 680 x 680 x 400mm (H) Providing and placing centre table. Table top shall have 1.0mm thick laminate over 25mm (19+6) thick commercial ply with white oak edging/lipping supported on white oak wood frame made to shape as per drawing. All exposed Wooden/Veneer work shall be finished in PU polish, complete in all respect to be manufactured strictly as per Drawing no. F-08B.

STUDY TABLE - 1800 x 600 x 750mm (H) Providing and placing Study table fabricated out of 4mm white oak veneer over 25mm (19+6mm) thick commercial ply table top with white oak edge lipping made to shape as per drawing & to be finished in PU Polish. The drawer shall be fitted with drawer slides, handles, locks etc. of approved make. The top shall rest upon 25 x 75 mm Hard wood members fixed to white oak wooden legs made to shape as per drawing, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-08B.

CENTRE TABLE - 680 x 680 x 400mm (H) Providing and placing centre table. Table top shall have 1.0mm thick laminate over 25mm (19+6) thick commercial ply with white oak edging/ lipping supported on white oak wood frame made to shape as per drawing. All exposed Wooden/Veneer work shall be finished in PU polish, complete in all respect to be manufactured strictly as per Drawing no. F-09B.

STUDY TABLE - 1800 x 600 x 750mm (H) Providing and placing Study table fabricated out of 4mm white oak veneer over 25mm (19+6mm) thick commercial ply table top with white oak edge lipping made to shape as per drawing & to be finished in PU Polish. The drawer shall be fitted with drawer slides, handles, locks etc. of approved make. The top shall rest upon 25 x 75 mm Hard wood members fixed to white oak wooden legs made to shape as per drawing, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-09B.

CENTRE TABLE - 680 x 1200 x 400mm (H) Providing and placing 12mm thick toughened glass top centre table supported on white oak wood frame made to shape as per drawing. Glass top will have 65mm wide ceramic white paint band. Wood members shall be finished in PU polish, complete in all respect to be manufactured strictly as per Drawing no. F-11A.

CORNER TABLE - 680 x 680 x 400mm (H) Providing and placing 12mm thick toughened glass top centre table supported on white oak wood frame made to shape as per drawing. Glass top will have 65mm wide ceramic white paint band. Wood members shall be finished in PU polish, complete in all respect to be manufactured strictly as per Drawing no. F-11A.

DINING TABLE - 1200 x 900 x 750mm (H) Providing and placing dining table. Table top shall have 8mm thick toughened glass top over 4mm thick decorative white oak veneer over 25mm (19 + 6mm) thick commercial ply with 6mm thick white oak wood lipping made to shape as per drawing and white oak wood square tapered wooden legs (75 x 75 mm at top and 50 x 50 mm at bottom), all exposed wooden/veneer work shall be finished in PU Polish, complete in all respects to be manufactured strictly as per Drawing no. F-11B.

STUDY TABLE - 1200 x 600 x 750mm (H) Providing and placing Study table fabricated out of 4mm white oak veneer over 25mm (19+6mm) thick commercial ply table top with white oak edge lipping made to shape as per drawing & to be finished in PU Polish. The drawer shall be fitted with drawer slides, handles, locks etc. of approved make. The top shall rest upon 25 x 75 mm Hard wood members fixed to white oak wooden legs made to shape as per drawing, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-11D.

STORAGE UNIT & OTHER ST-01 - STORAGE UNIT - 1200 x 450 x 750mm (H) Providing and placing storage unit fabricated out of 19mm/ 12mm/ 6mm thick commercial ply, white oak wood skirting, shelves made of 19mm thick commercial ply complete in all respect as per drawing, storage shall comprise of 2 rows of filing drawers, drawers shall be fitted with drawer slides, handles, locks etc., magnetic catchers, external exposed surfaces shall be finished with 1.0mm thick laminate and all internal surfaces and back with 0.8mm thick laminate. Shutters to be fabricated out of 19mm thick commercial ply finished with 1.0mm thick laminate, all exposed wooden/veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. F-02B.

OVER HEAD STORAGE - 1200 x 400 x 850mm (H) (Wall Mounted) Providing and placing over-head storage Unit fabricated out of 19mm/ 12mm/ 6mm thick commercial ply complete in all respect as per drawing, Shutters/drawers shall be fitted with Soft closing hinges/drawer slides, handles, locks etc., magnetic catchers, external exposed surfaces shall be finished with 1.0mm thick laminate and all internal surfaces and back with 0.8mm thick laminate. Shutters to be fabricated out of 19mm thick commercial ply finished with 1.0mm thick laminate, all exposed wooden/veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. FR-02B.

CONFERENCE UNITS - 1500 x 450 x 750mm (H) Providing and placing conference unit fabricated out of 19mm/ 12mm/ 6mm thick commercial ply complete in all respect as per drawing. Table top to be fabricated with pre polished 19mm thick granite top of approved shade with edges moulded, over 19mm thick commercial ply, storage shall comprise of 1 rows of filing drawers, drawers shall be fitted with drawer slides, customize wooden handles etc., external exposed surfaces shall be finished with 4.0mm thick white oak veneer, Rear and all internal surfaces and back with 0.8mm thick laminate. Shutters to be fabricated out of 19mm thick commercial ply finished with 4.0mm thick white oak veneer, all exposed wooden/veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-03.

DISPLAY UNITS - 1500 x 450 x 750mm (H) Providing and placing conference unit fabricated out of 19mm/ 12mm/ 6mm thick commercial ply complete in all respect as per drawing. Table top to be fabricated with pre polished 19mm thick granite top of approved shade with edges moulded, over 19mm thick commercial ply, storage shall comprise of 1 rows of filing drawers, drawers shall be fitted with drawer slides, customise wooden handles etc., external exposed surfaces shall be finished with 4.0mm thick white oak veneer, Rear and all internal surfaces and back with 0.8mm thick laminate. Shutters to be fabricated out of 19mm thick commercial ply finished with 4.0mm thick white oak veneer, all exposed wooden/veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-04.

LCD UNIT (Excluding LCD) - 1800 x 1100mm (H) Providing and placing LCD Unit (excluding LCD) fabricated out of 4mm thick decorative white oak veneer over 19mm thick commercial ply finished in PU Polish. Additional unit consisting of drawer of size 1200 x 225 x 300mm depth fabricated out of 4mm thick decorative white oak veneer over 12mm thick commercial ply with 12mm thick toughened glass on top of 1800mm length and 300mm width, and all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per design and Drawing no. F-06A.

LUGGAGE RACK - 1600 x 600 x 980mm (H) Providing and placing Luggage rack with vertical members fabricated out of with 12mm commercial ply over 19mm commercial ply finished with 4mm thick white oak veneer with 25 x 8mm SS oval Strips fixed at 75mm c/c distance as shown in drawing. Vertical member over wall to be finished in 4mm white oak veneer over 9mm thick commercial ply, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-06A.

TEA / COFFEE UNIT - 1500 x 600 x 980mm (H) Providing and placing Tea/Coffee Unit with vertical members fabricated out of 12mm commercial ply over 19mm commercial ply finished with 4mm thick white oak veneer on both sides. Vertical member over wall to be finished in 4mm white oak veneer over 9mm thick commercial ply. Table top with pre polished 19mm thick granite top of approved shade with edges moulded, over 19mm thick commercial ply, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per design and Drawing no. F-06A.

CUPBOARD - 2750 x 600 x 2100mm (H) Providing and placing Cupboard with top and vertical members fabricated out of 12mm commercial ply over 19mm commercial ply finished with 0.8mm thick laminate on interior surfaces and 4mm thick white oak Veneer on exterior surface, shelves made of 19mm thick commercial ply complete in all respect as per drawing. The shutters shall have 32 x10mm louver look white oak wooden members fixed over 19mm thick commercial ply as shown in drawing, shall be fitted with piano hinges, custom made wooden handles, locks of approved make, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per design and Drawing no. F-06C.

DINING UNIT - 900 x 530 x 830mm (H) Providing and placing dining unit fabricated out of 19mm/ 12mm/ 6mm thick commercial ply. Table top to be fabricated with pre polished 19mm thick granite top of approved shade with edges moulded, over 19mm thick commercial ply. Back to be finished with 0.8mm thick laminate over 6mm thick commercial ply. Drawers and shutter shall be fitted with drawer slides, handles, locks, magnetic catchers etc. External exposed surfaces shall be finished with 4.0mm thick white oak veneer and all internal surfaces finished with 0.8mm thick laminate. Shutters to be fabricated out of 19mm thick commercial ply finished with 4mm thick white oak veneer. White oak wood square tapered wooden legs of size 62.5 x 62.5 mm at top, 40 x 40 mm at bottom, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-06E.

DISPLAY UNIT -1800 x 370 x 830mm (H) Providing and placing Display Unit. Table top shall have 19mm thick prepolished granite over frame made of MS pipe 35 x 35mm complete in all respect to be manufactured strictly as per Drawing no. F-06E.

LUGGAGE RACK - 1070 x 600 x 980mm (H) Providing and placing Luggage rack with vertical members fabricated out of with 12mm commercial ply over 19mm commercial ply finished with 4mm thick white oak veneer with 25 x 8mm SS oval Strips fixed at 75mm c/c distance as shown in drawing. Vertical member over wall to be finished in 4mm white oak veneer over 9mm thick commercial ply, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-08B.

TEA / COFFEE UNIT - 1070 x 600 x 980mm (H) Providing and placing Tea/Coffee Unit with vertical members fabricated out of 12mm commercial ply over 19mm commercial ply finished with 4mm thick white oak veneer on both sides. Vertical member over wall to be finished in 4mm white oak veneer over 9mm thick commercial ply. Table top with pre polished 19mm thick granite top of approved shade with edges moulded, over 19mm thick commercial ply, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per design and Drawing no. F-08B.

CUPBOARD - 1200 x 600 x 2100mm (H) Providing and placing Cupboard with top and vertical members fabricated out of 12mm commercial ply over 19mm commercial ply finished with 0.8mm thick laminate on interior surfaces and 4mm thick white oak Veneer on exterior surface, shelves made of 19mm thick commercial ply complete in all respect as per drawing. The shutters shall have 32 x10mm louver look white oak wooden members fixed over 19mm thick commercial ply as shown in drawing, shall be fitted with piano hinges, custom made wooden handles, locks of approved make, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per design and Drawing no. F-08B.

TEA / COFFEE UNIT - 750 x 600 x 980mm (H) Providing and placing Tea/Coffee Unit with vertical members fabricated out of 12mm commercial ply over 19mm commercial ply finished with 4mm thick white oak veneer on both sides. Vertical member over wall to be finished in 4mm white oak veneer over 9mm thick commercial ply. Table top with pre polished 19mm thick granite top of approved shade with edges moulded, over 19mm thick commercial ply, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per design and Drawing no. F-09B.

LUGGAGE RACK - 1270 x 600 x 980mm (H) Providing and placing Luggage rack with vertical members fabricated out of with 12mm commercial ply over 19mm commercial ply finished with 4mm thick white oak veneer with 25 x 8mm SS oval Strips fixed at 75mm c/c distance as shown in drawing. Vertical member over wall to be finished in 4mm white oak veneer over 9mm thick commercial ply, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-09B.

CUPBOARD - 1200 x 600 x 2100mm (H) Providing and placing Cupboard with top and vertical members fabricated out of 12mm commercial ply over 19mm commercial ply finished with 0.8mm thick laminate on interior surfaces and 4mm thick white oak Veneer on exterior surface, shelves made of 19mm thick commercial ply complete in all respect as per drawing. The shutters shall have 32 x10mm louver look white oak wooden members fixed over 19mm thick commercial ply as shown in drawing, shall be fitted with piano hinges, custom made wooden handles, locks of approved make, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per design and Drawing no. F-09B.

DINING UNIT - 1200 x 530 x 830mm (H) Providing and placing dining unit fabricated out of 19mm/ 12mm/ 6mm thick commercial ply. Table top to be fabricated with pre polished 19mm thick granite top of approved shade with edges moulded, over 19mm thick commercial ply. Back to be finished with 0.8mm thick laminate over 6mm thick commercial ply. Drawers and shutter shall be fitted with drawer slides, handles, locks, magnetic catchers etc. External exposed surfaces shall be finished with 4.0mm thick white oak veneer and all internal surfaces finished with 0.8mm thick laminate. Shutters to be fabricated out of 19mm thick commercial ply finished with 4mm thick white oak veneer. White oak wood square tapered wooden legs of size 62.5 x 62.5 mm at top, 40 x 40 mm at bottom, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-11B.

LCD UNIT (Excluding LCD) - 1800 x 1100mm (H) Providing and placing LCD Unit (excluding LCD) fabricated out of 4mm thick decorative white oak veneer over 19mm thick commercial ply finished in PU Polish. Additional unit consisting of drawer of size 1200 x 225 x 300mm depth fabricated out of 4mm thick decorative white oak veneer over 12mm thick commercial ply with 12mm thick toughened glass on top of 1800mm length and 300mm width, and all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per design and Drawing no. F-11C.

LUGGAGE RACK - 1070 x 600 x 980mm (H) Providing and placing Luggage rack with vertical members fabricated out of with 12mm commercial ply over 19mm commercial ply finished with 4mm thick white oak veneer with 25 x 8mm SS oval Strips fixed at 75mm c/c distance as shown in drawing. Vertical member over wall to be finished in 4mm white oak veneer over 9mm thick commercial ply, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-11D.

TEA / COFFEE UNIT - 750 x 600 x 980mm (H) Providing and placing Tea/Coffee Unit with vertical members fabricated out of 12mm commercial ply over 19mm commercial ply finished with 4mm thick white oak veneer on both sides. Vertical member over wall to be finished in 4mm white oak veneer over 9mm thick commercial ply. Table top with pre polished 19mm thick granite top of approved shade with edges moulded, over 19mm thick commercial ply, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per design and Drawing no. F-11D.

CUPBOARD - 2100 x 600 x 2100mm (H) Providing and placing Cupboard with top and vertical members fabricated out of 12mm commercial ply over 19mm commercial ply finished with 0.8mm thick laminate on interior surfaces and 4mm thick white oak Veneer on exterior surface, shelves made of 19mm thick commercial ply complete in all respect as per drawing. The shutters shall have 32 x10mm louver look white oak wooden members fixed over 19mm thick commercial ply as shown in drawing, shall be fitted with piano hinges, custom made wooden handles, locks of approved make, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per design and Drawing no. F-11D.

CHAIRS RECEPTIONISTS'/ BACK OFFICE CHAIR Providing and placing medium back revolving chair. The overall dimensions of the chair shall be 76.1cm x 76.1cm x (98.6-116.1cm). The seat height shall be 44.5cm-54.5cm. The cushioned seat and back is made of injection moulded Plastic outer and Inner. Plaster inner is upholstered with stitched cover and moulded high Resilience Polyurethane foam of density 45kg per meter cube. The stitched cover is made from spacer fabric and leatherette. Seat size shall be 47cm x 48cm. The Back size shall be 45cm x 60.5cm. The armrests top is moulded from PU and mounted on to a drop lift adjustment type tubular armrest support made of 3.8cm diameter x 0.2cm thick MS ERW tube. The armrest height is adjustable uptp 6.5cm in 5 steps. The armrest structure is powder coated upto 40-60 microns. It shall have active bio synchro mechanism with features like 360 degree revolving, front pivot tilt mechanism, tilt tension adjustment, 5-position tilt limiter, etc.. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is 6cm. It shall also have adjustable back support. Back frame is connected to Up/Down mechanism housed in plastic T spine. It can be adjusted fro 7.2cm for comfortable back support to suit individual need. The pneumatic height adjustment has an stroke of 10cm. The pedestal is injection moulded in black 33 % glass filled Nylon 66 and fitted with 5 nos. of twin wheel castors. The pedestal is 66cm pitch center dia complete in all respects as per Drawing No. F-02B.

BACK OFFICE VISITORS' CHAIR Providing and placing static visitor chairs. The overall dimensions of the chair shall be 60.9cm x 64.3cm x 99.6cm. The seat height shall be 44.8cm. The cushioned seat and back is made of injection moulded Plastic outer and Inner. Plaster inner is upholstered with stitched cover and moulded high Resilience Polyurethane foam of density 45kg per meter cube. The stitched cover is made from spacer fabric and leatherette. Seat size shall be 47cm x 48cm. The Back size shall be 45cm x 60.5cm. The armrests top is moulded from PU and mounted on to a drop lift adjustment type tubular armrest support made of 3.8cm diameter x 0.2cm thick MS ERW tube. The tubular frame shall be powder coated DFT 40-60 microns and is cantilever type and made of 2.54cm X 0.2cm thick MS ERW tube. The back is connect to frame through powder coated high pressure die cast connector piece complete in all respect and to be manufactured strictly as per Drawing No. F-02B.

CHAIRPERSON CHAIR Providing and placing high back revolving chair. The overall dimensions of the chair shall be 76.1cm x 76.1cm x (113.6-131.1cm). The seat height shall be 44.5cm-54.5cm. The cushioned seat and back is made of injection moulded Plastic outer and Inner. Plaster inner is upholstered with stitched cover and moulded high Resilience Polyurethane foam of density 45kg per meter cube. The stitched cover is made from spacer fabric and leatherette. Seat size shall be 47cm x 48cm. The Back size shall be 45cm x 75.5cm. The armrests top is moulded from PU and mounted on to a drop lift adjustment type tubular armrest support made of 3.8cm diameter x 0.2cm thick MS ERW tube. The armrest height is adjustable uptp 6.5cm in 5 steps. The armrest structure is powder coated upto 40-60 microns. It shall have active bio synchro mechanism with features like 360 degree revolving, front pivot tilt mechanism, tilt tension adjustment, 5-position tilt limiter, etc.. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is 6cm. It shall also have adjustable back support. Back frame is connected to Up/Down mechanism housed in plastic T spine. It can be adjusted from 7.2cm for comfortable back support to suit individual need. The pneumatic height adjustment has an stroke of 10cm. The pedestal is injection moulded in black 33 % glass filled Nylon 66 and fitted with 5 nos. of twin wheel castors. The pedestal is 66cm pitch center dia complete in all respects as per Drawing no. F-03.

CONFERENCE CHAIRS Providing and placing medium back revolving chair. The overall dimensions of the chair shall be 76.1cm x 76.1cm x (98.6-116.1cm). The seat height shall be 44.5cm-54.5cm. The cushioned seat and back is made of injection moulded Plastic outer and Inner. Plaster inner is upholstered with stitched cover and moulded high Resilience Polyurethane foam of density 45kg per meter cube. The stitched cover is made from spacer fabric and leatherette. Seat size shall be 47cm x 48cm. The Back size shall be 45cm x 60.5cm. The armrests top is moulded from PU and mounted on to a drop lift adjustment type tubular armrest support made of 3.8cm diameter x 0.2cm thick MS ERW tube. The armrest height is adjustable uptp 6.5cm in 5 steps. The armrest structure is powder coated upto 40-60 microns. It shall have active bio synchro mechanism with features like 360 degree revolving, front pivot tilt mechanism, tilt tension adjustment, 5-position tilt limiter, etc.. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is 6cm. It shall also have adjustable back support. Back frame is connected to Up/Down mechanism housed in plastic T spine. It can be adjusted from 7.2cm for comfortable back support to suit individual need. The pneumatic height adjustment has an stroke of 10cm. The pedestal is injection moulded in black 33 % glass filled Nylon 66 and fitted with 5 nos. of twin wheel castors. The pedestal is 66cm pitch center dia complete in all respects as per Drawing no. F-03.

CONFERENCE STATIC CHAIR Providing and placing static chairs. The overall dimensions of the chair shall be 60.9cm x 64.3cm x 99.6cm. The seat height shall be 44.8cm. The cushioned seat and back is made of injection moulded Plastic outer and Inner. Plaster inner is upholstered with stitched cover and moulded high Resilience Polyurethane foam of density 45kg per meter cube. The stitched cover is made from spacer fabric and leatherette. Seat size shall be 47cm x 48cm. The Back size shall be 45cm x 60.5cm. The armrests top is moulded from PU and mounted on to a drop lift adjustment type tubular armrest support made of 3.8cm diameter x 0.2cm thick MS ERW tube. The tubular frame shall be powder coated DFT 40-60 microns and is cantilever type and made of 2.54cm X 0.2cm thick MS ERW tube. The back is connect to frame through powder coated high pressure die cast connector piece complete in all respect and to be manufactured strictly as per Drawing no. F-03.

DINING CHAIRS Providing and placing static white oak dining chair. The dimensions of chair should be 460mm (W) x 520mm (D). The seat shall be made up of white oak wood and upholstered with fabric of minimum 350 GSM and in the range of Rs 800 - 1000 per metre over [50mm high density foam(50 kg/m³) + 25mm soft foam(40 kg/m³)]. The back and legs shall be made up of white oak wood, all exposed wood/veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. F-05.

DINING CHAIRS Providing and placing static white oak dining chair. The dimensions of chair should be 525mm (W) x 600mm (D). The seat shall be made up of white oak wood and upholstered with fabric of minimum 350 GSM and in the range of Rs 800 - 1000 per metre over [50mm high density foam(50 kg/m³) + 25mm soft foam(40 kg/m³)]. The back and legs shall be made up of white oak wood, all exposed wood/veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. F-06E.

STUDY CHAIR Providing and placing static Study chair. The dimensions of seat should be- 475mm (W) x 475 mm (D) and of back shall be 550mm (W) x 755 mm (H). The seat shall be made up white oak wood and woven cane with cushioned back upholstered with fabric in the range of Rs 800 - 1000 per metre of approved make. The back and legs shall be made up of white oak wood. The chair shall be fabricated correct to shape and geometry, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-08A.

STUDY CHAIR Providing and placing static Study chair. The dimensions of seat should be- 475mm (W) x 475 mm (D) and of back shall be 550mm (W) x 755 mm (H). The seat shall be made up white oak wood and woven cane with cushioned back upholstered with fabric in the range of Rs 800 - 1000 per metre of approved make. The back and legs shall be made up of white oak wood. The chair shall be fabricated correct to shape and geometry, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-09A.

DINING CHAIRS Providing and placing static white oak dining chair. The dimensions of chair should be 525mm (W) x 600mm (D). The seat shall be made up of white oak wood and upholstered with fabric of minimum 350 GSM and in the range of Rs 800 - 1000 per metre over [50mm high density foam(50 kg/m³) + 25mm soft foam(40 kg/m³)]. The back and legs shall be made up of white oak wood, all exposed wood/veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. F-11B.

STUDY CHAIR Providing and placing static Study chair. The dimensions of seat should be- 475mm (W) x 475 mm (D) and of back shall be 550mm (W) x 755 mm (H). The seat shall be made up white oak wood and woven cane with cushioned back upholstered with fabric in the range of Rs 800 - 1000 per metre of approved make. The back and legs shall be made up of white oak wood. The chair shall be fabricated correct to shape and geometry, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-11C.

SOFA LOBBY SEATING - (Two Seater) (Overall size 1200 x 575mm) Providing and placing fully upholstered two seater sofa with 100 mm (25mm High Density Foam + 100mm thick latex rubber + 25mm thick high Density Foam in seat and 75mm (25 + 50) thick soft foam in back of approved make fabricated out of white oak wood members. The fabric used shall be of minimum 350 GSM and in the range of Rs 800 - 1000 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. F-02A.

THREE SEATER SOFA - (Clear Seat 1650 x 550mm), (Overall size 2250 x 825mm) Providing and placing fully upholstered three seater sofa with 150mm (100mm thick Latex rubber + 50mm thick soft foam) in seat and 125mm (25mm soft foam + 100mm thick soft cushion) in back of approved make fabricated out of white oak wood members. The fabric used shall be of minimum 350 GSM and in the range of Rs 800 - 1000 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. F-04.

SINGLE SEATER SOFA - (Clear Seat 550 x 550mm), (Overall size 850 x 825mm) Providing and placing fully upholstered single seater sofa with 150mm (100mm thick Latex rubber + 50mm thick soft foam) in seat and 125mm (25mm soft foam + 100mm thick soft cushion) in back of approved make fabricated out of white oak wood members. The fabric used shall be of minimum 350 GSM and in the range of Rs 800 - 1000 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. F-04.

THREE SEATER SOFA - (Clear Seat 1650 x 550mm), (Overall size 1900 x 825mm) Providing and placing fully upholstered three seater sofa with 125mm (100mm thick latex rubber + 25mm thick soft foam) in seat and 125mm (100mm thick soft cushion + 25mm soft foam) in back of approved make fabricated out of white oak wood members. The fabric used shall be of minimum 350 GSM and in the range of Rs 800 - 1000 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. F-06B.

SINGLE SEATER SOFA - (Clear Seat 550 x 550mm), (Overall size 800 x 825mm) Providing and placing fully upholstered single seater sofa with 125mm (100mm thick latex rubber + 25mm thick soft foam) in seat and 125mm (100mm thick soft cushion + 25mm soft foam) in back of approved make fabricated out of white oak wood members. The fabric used shall be of minimum 350 GSM and in the range of Rs 800 - 1000 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. F-06B.

THREE SEATER SOFA - (Clear Seat 1650 x 575mm), (Overall size 2150 x 825mm) Providing and placing fully upholstered three seater sofa with 150mm (25mm thick high density foam + 100mm thick Latex rubber + 25mm thick soft foam) in seat and 75mm (25 + 50) thick soft foam in back of approved make fabricated out of white oak wood members. The fabric used shall be of minimum 350 GSM and in the range of Rs 800 - 1000 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. F-06D.

SINGLE SEATER SOFA- (Clear Seat 575 x 575mm), (Overall size 1075 x 825mm) Providing and placing fully upholstered single seater sofa with 150mm (25mm thick high density foam + 100mm thick Latex rubber + 25mm thick soft foam) in seat and 75mm (25 + 50) thick soft foam in back of approved make fabricated out of white oak wood members. The fabric used shall be of minimum 350 GSM and in the range of Rs 800 - 1000 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. F-06D.

SINGLE SOFA - (Clear Seat 550 x 550mm), (Overall size 630 x 850mm) Providing and placing fully upholstered single sofa with 50mm thick high density foam ( 50 kg/m³ density) in seat and back of approved make over frame fabricated out of pine wood. Exposed wooden legs and armrest fabricated out of white oak wood. The fabric used shall be of minimum 350 GSM and in the range of Rs 800 - 1000 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-08A.

SINGLE SOFA - (Clear Seat 550 x 550mm), (Overall size 630 x 850mm) Providing and placing fully upholstered single sofa with 50mm thick high density foam (50 kg/m³ density) in seat and back of approved make over frame fabricated out of pine wood. Exposed wooden legs and armrest fabricated out of white oak wood. The fabric used shall be of minimum 350 GSM and in the range of Rs 800 - 1000 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-09A.

VIP SUITE - FOUR (4) THREE SEATER SOFA - (Clear Seat 1650 x 550mm), (Overall size 1900 x 825mm) Providing and placing fully upholstered three seater sofa with 125mm (100mm thick latex rubber + 25mm thick soft foam) in seat and 125mm (100mm thick soft cushion + 25mm soft foam) in back of approved make fabricated out of white oak wood members. The fabric used shall be of minimum 350 GSM and in the range of Rs 800 - 1000 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. F-11A.

SINGLE SEATER SOFA- (Clear Seat 550 x 550mm), (Overall size 800 x 825mm) Providing and placing fully upholstered single seater sofa with 125mm (100mm thick latex rubber + 25mm thick soft foam) in seat and 125mm (100mm thick soft cushion + 25mm soft foam) in back of approved make fabricated out of white oak wood members. The fabric used shall be of minimum 350 GSM and in the range of Rs 800 - 1000 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. F-11A.

SINGLE SOFA - (Clear Seat 550 x 550mm), (Overall size 630 x 850mm) Providing and placing fully upholstered single sofa with 50mm thick high density foam ( 50 kg/m³ density) in seat and back of approved make over frame fabricated out of pine wood. Exposed wooden legs and armrest fabricated out of white oak wood. The fabric used shall be of minimum 350 GSM and in the range of Rs 800 - 1000 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-11C.

BED CM SUITE - ONE (1) & GOVERNOR SUITE - ONE (1) BED - 1870 x 2100mm with Mattress Providing and placing white oak Bed made of 19mm plywood over 38 x 100mm hardwood members. Exterior surfaces to be finished in 4mm thick decorative white oak veneer over 31mm (12+19mm) thick commercial ply with 35 x 4mm thick edge lipping with head board made of 19mm commercial ply finished with quilting in leatherite over 50mm thick foam over 12mm thick commercial ply and edging in 50 x 25mm thick white oak wooden band made to shape. white oak wooden legs of size 100 x 100 mm with reducing ends, all exposed Wooden/Veneer work shall be finished in PU Polish, including 130mm thick Mattress (Bonded + Soft foam) complete in all respect to be manufactured strictly as per Drawing no. F-06A.

BED SIDE TABLE - 600 x 450 x 530mm (H) Providing and placing Bed Side Table finished in 4mm thick decorative white oak veneer over 19mm thick commercial ply consisting of two drawers finished with 0.8mm thick laminate on interior surfaces with drawer channel, custom made wooden handles etc. white oak wooden legs of size 75 x 75 mm with reducing ends, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-06A.

GUEST ROOMS - TYPE 1 - TWENTY FOUR (24) PA ROOMS - TWO (2) BED - 1870 x 2100mm with Mattress Providing and placing white oak Bed made of 19mm plywood over 38 x 100mm hardwood members. Exterior surfaces to be finished in 4mm thick decorative white oak veneer over 31mm (12+19mm) thick commercial ply with 35 x 4mm thick edge lipping with head board finished with 100mm wide x 12mm thick white oak wooden panels to be fixed on 40 x 100mm wooden legs with flat nylon castors made as per shape, white oak wooden legs of size 75 x 75 mm with reducing ends, all exposed Wooden/Veneer work shall be finished in PU Polish, including 130mm thick Mattress (Bonded + Soft foam) complete in all respect to be manufactured strictly as per Drawing no. F-08A.

BED SIDE TABLE - 600 x 450 x 530mm (H) Providing and placing Bed Side Table finished in 4mm thick decorative white oak veneer over 19mm thick commercial ply consisting of one drawers finished with 0.8mm thick laminate on interior surfaces with drawer channel etc. white oak wooden legs of size 75 x 75 mm with reducing ends, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-08A.

GUEST ROOMS - TYPE 2- TWELVE (12) BED - 900 x 2100mm with Mattress Providing and placing white oak Bed made of 19mm plywood over 38 x 100mm hardwood members. Exterior surfaces to be finished in 4mm thick decorative white oak veneer over 31mm (12+19mm) thick commercial ply with 35 x 4mm thick edge lipping with head board finished with 100mm wide x 12mm thick white oak wooden panels to be fixed on 40 x 100mm wooden legs with flat nylon castors made as per shape, white oak wooden legs of size 75 x 75 mm with reducing ends, all exposed Wooden/Veneer work shall be finished in PU Polish, including 130mm thick Mattress (Bonded + Soft foam) complete in all respect to be manufactured strictly as per Drawing no. F-09A.

BED SIDE TABLE - 900 x 450 x 530mm (H) Providing and placing Bed Side Table finished in 4mm thick decorative white oak veneer over 19mm thick commercial ply consisting of one drawers finished with 0.8mm thick laminate on interior surfaces with drawer channel etc. white oak wooden legs of size 75 x 75 mm with reducing ends, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-09A.

BED - 1870 x 2100mm with Mattress Providing and placing white oak Bed made of 19mm plywood over 38 x 100mm hardwood members. Exterior surfaces to be finished in 4mm thick decorative white oak veneer over 31mm (12+19mm) thick commercial ply with 35 x 4mm thick edge lipping with head board made of 19mm commercial ply finished with 100mm wide leatherite panels over 25mm thick foam over 12mm thick commercial ply. Head board to continue over bed side table, to be finished in 4mm thick white oak veneer over 19mm thick commercial ply, white oak wooden legs of size 100 x 100 mm with reducing ends, all exposed Wooden/Veneer work shall be finished in PU Polish, including 130mm thick Mattress (Bonded + Soft foam) complete in all respect to be manufactured strictly as per Drawing no. F-11C.

BED SIDE TABLE - 600 x 450 x 530mm (H) Providing and placing Bed Side Table finished in 4mm thick decorative white oak veneer over 19mm thick commercial ply consisting of two drawers finished with 0.8mm thick laminate on interior surfaces with drawer channel, custom made wooden handles etc. white oak wooden legs of size 75 x 75 mm with reducing ends, all exposed Wooden/Veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing no. F-11C.