SV National Institute Of Technology Tender

Dismantling wash basins/ s.s. sink of all sizes including PVC connections, flexible waste pipe and disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. {As per M.R. + 1% L.C. (115.00 + 1.15 = 116.15)}

Removing old damaged plumbing fittings e.g. Bib cock, piller cock, angle cock, Heath faucet, metro pole flush cock and deposit it in store etc. Complete. {As per M.R.+1% L.C.(40.00+0.40=40.40)}

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 100 mm dia pipe. (DSR cn:-15.42.2, P/242)

Providing, laying and jointing in true line and level 110 diametre SWR (Type B) Ringfit conforming to ISI 13592, 1992 with one end plain and other end socketed with rubber ring, & fittings including 75x110 mm reducer socket conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. {As per R.A. + 1% L.C.(650.00+6.50=656.50)

Providing and fixing PVC SWR Nahni trap IS 14735 for drain-75 mm diameter with jali of the following nominal diameter of self cleansing design with C.I. scread down or hinged grating including the cost of cutting and making good the walls. {As Per M.R.+ 1% L.C. (368.00+3.68=371.68 )}

Providing and fixing 100 mm size P or S trap for water closet squatting pan including jointing the trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand) (A) PVC SWR (Type-B). {As Per M.R.+ 1% L.C. (325.00+3.25=328.25 )}

Dismantling 15 to 40 mm dia G.I./PVC pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin- Charge. (a) Internal Work- Exposed on wall (DSR cn:14.84, P/234)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes. (DSR cn:18.7.3, P/281)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes. (DSR cn:18.7.1, P/281)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) (DSR cn:-4.1.3, P/103)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.(DSR cn:-11.37, P/193)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR cn:-8.31, P/143)

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba, all complete as per the direction of Engineer-in charge. Orissa petternW.C. pan of size 580X440 (DSR cn:-14.80.2, P/234)

Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan. (DSR cn:-17.15, P/267)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR cn:-13.91, P/224)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall urface to prepare the surface even and smooth complete. (DSR IT.: 13.80, P-223)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work (DSR-2021 cn:-13.98, P/267)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. (DSR IT.: 15.12.1, P-240)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In-Charge.(M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 50 x 100 mm (DSR IT.: 26.86.3, P-376)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 30 mm thick (DSR IT.: 26.87.1, P-377)

Providing stainless steel butt hinges 100x58x1.9 mm IS : 12817 marked. (DSR IT.: 8216, P-63)

Providing stainless steel screws 40 mm. (DSR IT.: 8211, P-63)

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. (DSR IT.: 17.7B, P-267)

Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms. (DSR IT.:18.63, P-290)

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length. (DSR IT.:18.74.2, P-293)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia. 40 mm dia. (DSR IT.:17.28.2.1/17.28.2.2, P-293)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR IT.:17.31, P-269)

Providing and fixing PTMT flush cock of approved quality including fixing in pipe line etc. complete. : 25mm dia. {As per M.R.+1% L.C. (525.00 + 5.25 = 530.25)}

Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 122 mm long, weighing not less than 99 gms. (DSR IT.:18.54.2 , P-289)

Providing and fixing adjustable loovers type aluminium ventilators including 100 mm vide 7-8 nos. frosted glass blades. {As per M.R.+1% L.C. (850.00 + 8.50 = 858.50)}

Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of area less than 0.50 sqm. (DSR IT.:16.86.1, P-260)

Disposal of building rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR IT.: 15.60, P-243)

Providing and fixing solid plastic seat with lid for pedestal type W.C. Pan complete : White solid plastic seat with lid. (DSR IT.: 17.20.1 , P-268)