Ministry Of Road Transport And Highways Tender
... More
The MORTH has issued a formal invitation for competitive bids for the Ministry Of Road Transport And Highways project, for Annual Rates For M And R/fdr Works Of N.h. No. 58 At Km. 0/00 To 160/320 Khokhra Border-vijaynagar Mathasur Chokdi- Vadali Dharoi-satlasana-kheralu Vadgham-palanpur Road. (providing Asphalt Patch, Paver Patta And Road Surfacing Etc. in Sabarkantha, Gujarat. The bid opening date for this tender is 20-09-2021 and the last date for bid submission is 11-10-2021. Interested bidders for Ministry Of Road Transport And Highways tender can download the important documents here to check the tender amount, scope of work, eligibility criteria and technical requirements.
Ministry Of Road Transport And Highways - MORTH Tender
Eprocure
Opening Date20 Sep 2021
Closing Date11 Oct 2021
Tender AmountRefer Documents
Costs
EMD
Refer DocumentsDocument Cost
₹ 1,500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_MoRTH_648724_1Bid Award Id
ViewTender No
16 of 2021-2022Tender Authority
Ministry Of Road Transport And Highways ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means
1
-
20
... More
MSS :Close Graded Premix Surfacing/Mixed Seal Surfacing for patch work using HMP of appropriate capacity not less than 75 tonnes/hour. Providing, laying mix materials of MSS of close-graded premix surfacing material of average 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-a) or 13.2 mm to 0.09 mm (Type-b) aggregates using penetration grade bitumen 80/100 @ 5.0 % to the required line, grade and level to serve as patchwork on a previously prepared base, including mixing in a suitable plant, laying by manual means and carting loading and unloading in government vehicle including sprading by contractors labour and excluding cost of tack coat etc. comp.
1
-
3061
... More
B.T. Surface Painting: Providing and applying surface painting on B.T. surface using bitumen emulsion at the rate of 5 kg / 10 sq.m. and flushing dust / sand at the rate of 0.06 cu.m. / 10 sq.m. as per MoRT&H specification.
1
-
33
... More
Micro Surfacing: Providing and Laying Microsurfacing as per MoRT&H Specification (Section-514) Grading of Specification, Polymer modified cationic bitumen emulsion, Ordinary Portland Cement, Chemical Additives and water etc complete or as directed by Engineer in-charge.
1
-
209
... More
Tack Coat : Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.
1
-
7
... More
Dense graded Bituninous Macadam: Providing and laying average 50mm thick dense graded bituminous macadam with 100-120 TPH HMP producing an average output of 75 tonnes per hour / DMP 60-90 TPH capacity using crushed aggregates of specified grading, premixed with Bituminous Binder VG-30 Grade @ 4.50 per cent by weight of total mix or as per 5th Revision of MoRT&H Specification of Road and Bridge Work and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects (Grading-II) including the cost of bitumen emulsion tack coat at the rate of 0.20kg/sqm.
1
-
3240
... More
Supplying of reaymade cold mix bags to Government store/ working site for patching filling pot holes of bituminious surface.(As per Specification)
1
-
25000
... More
Bituminious Macadam : Providing and laying bituminous macadam for patch work with DMP 60-90 TPH capacity / 80 - 100 TPH capacity using crushed aggregates of specified grading premixed with bituminous binder (VG-10) 80/100 grade @ 3.30% , transported to site by Govermnent vehicle, laid over a previously prepared surface with manual means to the required grade, level and alignment including all materials, Machineries and labour . excluding cost of carting & including cost of labour for spreading (ii) for grading II ( 19mm nominal size)
1
-
2329
... More
Labour Charges for BUSG : Labour charges for laying and rolling of built-up-spray grout layer over prepared base consisting of a two layer composite construction of compacted crushed coarse aggregates and key stone chips with application of bituminous binder 30 kg per 10 sqm (@ 15 kg per 10 sqm for each layer ), and with key aggregates placed on top of the second layer to serve as a base conforming to the line, grades and cross-section specified,layer thickness being average 75 mm excluding cost of materials and including cost of rolling.
1
-
25.2
... More
MSS :Close Graded Premix Surfacing/Mixed Seal Surfacing for paver patta using mechanical means using HMP of appropriate capacity not less than 75 tonnes/hour. Providing, laying paver patta with mix materials of MSS and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-a) aggregates using penetration grade bitumen 60/70 (VG-30) @ 5.0 % to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying by paver finisher and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade including tack coat @ 0.20 kg per sq.m by mechanical sprayer including cost of all material, labour and machinary.
1
-
3841
... More
Bituminous Macadam : Providing and laying Bituminous Mmacadam with DMP 60-90 TPH capacity / 80 - 100 TPH capacity using crushed aggregates of specified grading premixed with bituminous binder 60/70 (VG-30) grade @ 3.30% , transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction including all materials, Machineries and labour including tack coat @ 0.20 Kg per Sqm by mechanical sprayer. (ii) for grading II ( 19mm nominal size)
1
-
2741
... More
Bituminous Macadam: Providing and laying bituminous macadam for patch work with DMP 60-90 TPH capacity / 80 - 100 TPH capacity using crushed aggregates of specified grading premixed with bituminous binder (VG-10) 80/100 grade @ 3.30% , transported to site, laid over a previously prepared surface with manual means to the required grade, level and alignment including all materials, machineries and labour including tack coat @ 0.20 Kg per Sqm (ii) for grading II ( 19mm nominal size)
1
-
2667
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements