Gujarat Biotechnology University Tender
Search for the latest Gujarat tenders online related to civil works, road & transport, pipelines and more easily here on BidAssist. Here you can get any and every tender that is posted on the eProcurement Gujarat website, minus the clutter. No need for a tender ID, as on BidAssist, you can view any Gujarat tender by merely typing Gujarat in the search box.
Gujarat Biotechnology University Tender
Opening Date26 Sep 2023
Closing Date1 Jan 2024
Tender Amount₹ 94,24,00,000
Costs
EMD
₹ 1,88,44,000Document Cost
Refer DocumentsTender Fee
₹ 17,700
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
9814Tender No
01Tender Authority
Gujarat Biotechnology University ViewPurchaser Address
-Website
http://tender.nprocure.com
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
202210-GBU-S3-H1-H2-DR-001-002.pdf
Response to prebid queries.pdf
Residential Corrigendum-II - extension of date.pdf
Residential Corrigendum-I .pdf
tender for Development of Residential Facilities_Corrigendum 6.pdf
BOQ Items
Excavation for foundation (for wall and column footings) from 3.0m to 5.0m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50Meter lead. (D)Dense or hard soft soil . Quantity for excavation shall be paid based on actual dimensions in the drawings
5139
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm .in depth consolidating each deposited layer by ramming and watering etc complete atleast 95% of maximum dry density as per IS :2720 as directed.
20343
-
-
Filling in plinth with (good quality) sand under floors including watering, ramming, consolidating and dressing etc. complete. (The same in layers not exceeding 200mm and compacting the layers to give at least 95% of maximum dry density.)
1407
-
-
Carring out plinth treatment to post construction / during construction by spraying chemical solution for termite control treatment including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent is recommended i.e one litre 20EC chemical emulsion with 19 liter give 1% concrentration inclusive of one litre chemical emulsion appication at the rate of 5Litre chemical / Sqm of surface is recommended as per I.S.
3879.59
-
-
Providing & laying cement concrete 1:3:6 (1: cement: 3 coarse sand: 6 machine crust stone aggregates 40 mm nominal size) for all depths below and up to plinth level in foundations and curing etc. complete including cost of formwork in Footings & Ground, Plinth Beams & below Floors
440
-
-
Providing & laying cement concrete 1:4:8 (1: cement: 4 coarse sand: 8 machine crust stone aggregates 40 mm nominal size) for all depths below and up to plinth level in foundations and curing etc. complete including cost of formwork in Footings & Ground, Plinth Beams & below Floors.
437
-
-
Providing and laying cement concrete 1:2:4 (1 Cement :2‐coarse sand :4‐crushed stone aggregates 20 mm nominal size) In Foundation & plinth and curing complete including cost of form work, dewatering etc. Rates are incl. shoring & strutiing and dewatering. No extra payment will be made for Shoring, Strutting and dewatering
24
-
-
Providing and laying damp proof course 25mm thick cement concrete 1:2:4 (1- Cement: 2coarse sand: 4stone aggregate 10 mm nominal size) and curing complete
43
-
-
Extra for providing and mixing water proofing material in Cement concrete in mix proportion recommended by the manufacturers.
5
-
-
Providing and filling machine mixed cement cinder in the ratio of 1:10 i.e. 1 part of cement and 10 parts of cinder by volume in sunk toilet at all the floors, at all levels including watering etc. completed.
395
-
-
Providing & Laying plinth protection to building including excavation in oridnary soil and laying cement concrete (0.10 mt thk)1 : 5: 10 using Stone aggregates of 20 mm nominal size in foundation Layer and above on PCC and providing and laying brick masonry 1:6 (1 cement:6 course sand) and providing Cement Cocrete 1:2:4 (0.10 mt thk)(1Cement : 2 Coarse Sand : 4 Stone Aggregrate 20 mm nominal size) coping on top including Broom finishing (plaster 10 mm )wiht Square line(0.20 X 0.20) marking on Top and Side )and curing etc complete only top area shall be measured
616
-
-
Providing TMT Bar FE 500D reinforcement for RCC work including bending, binding with G.I Binding wire and placing in position complete at differenct ht. and various level as shown in the drawing
1806579.53
-
-
Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer fo a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS:9103 to accelerate / retard setting of concrete ,improve workability without impairing strength and durability as per direction of the Engineer-in-charge. Without Fly Ash
13812.33
-
-
Providing and laying controlled cement concrete M.250 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C.work in (B)COLUMNS/WALL :(iii Having cross-sectional area more than 0.12Sq.M
1000
-
-
Providing form work of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc.Height of propping and centering below supporting floor to ceiling not exceeding 4M. and removal of the same for insitu reinforced concrete and plain concrete workin. (A) Foundations Footings Bases of Column setc. And Mass concrete.
632.8
-
-
Providing form work of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc.Height of propping and centering below supporting floor to ceiling not exceeding 4M. and removal of the same for insitu reinforced concrete and plain concrete workin. (B) Flat surfaces such as soffits of supspened floors slabs Landings and the like.(1) Floor setc.upto 200mmin
28211.73
-
-
Providing form work of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc.Height of propping and centering below supporting floor to ceiling not exceeding 4M. and removal of the same for insitu reinforced concrete and plain concrete workin. (C ) Vertical surface such as walls (anythickness) partitions and th elike including attached buttresses & string course & the like.
6040
-
-
Providing form work of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc.Height of propping and centering below supporting floor to ceiling not exceeding 4M. and removal of the same for insitu reinforced concrete and plain concrete workin. (G) Columns Pillars Posts and struts.(1)Square Rectangular Polygonal in plan.
5041
-
-
Providing form work of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc.Height of propping and centering below supporting floor to ceiling not exceeding 4M. and removal of the same for insitu reinforced concrete and plain concrete workin. (H) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers and Lintels not exceeding1 M.in Depth.
20858
-
-
Providing form work of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc.Height of propping and centering below supporting floor to ceiling not exceeding 4M. and removal of the same for insitu reinforced concrete and plain concrete workin. (M) Staircase with sloping or stepped soffits including risers and stringers excluding landing.
1254
-
-
Extra for Additional height of proping and centering where the height of propping and centering exceeds 4.0 m between supporting floor to ceilling For Height More than 6.0 M & Upto 7.0 M and above between supporting floor to ceiling including entering, shuttering using plywood shuttering plates, , Steel Adjustable Props,Cuplock system, planks, props, spans, runners for supoorting as required
9211
-
-
Brick work using common burnt clay building bricks having minimum crushing strength not less than 35 kg/ sq cm in foundation and plinth in cement mortar 1 : 6 (1 cement : 6 coarse sand)
55
-
-
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
4780
-
-
Brickwork using common burnt clay building bricks having crushing strength not less than 35 Kg./Sq.Cm. at differenct ht. and various level as shown in the drawing in cement Mortar 1:6 (1‐Cement :6‐finesand) (B) Conventional
78
-
-
Half Brick Masonary in common burnt clay building works bricks having crushing strength not less than 35 kg / sq. cm. in Cement mortar 1:3 (1‐ Cement :3‐coarse sand) with 2Nos of 6mm Mild steel round bars after every three course embedded in Cement Mortar in super structure upto floor two level (A) Conventional
213
-
-
Provinding and fixing chicken wire mesh of gauge 0.18mm and 200 mm wide with necessary screws and nail at joints cracks of brick work R.C.C work as per drawing and specification and direction of Engineer incharge.
871
-
-
Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases.
3164
-
-
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement :2 coarse sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately).Stainless steel cramps.
695
-
-
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Wedge expansion type Fastener with threaded dia 10 mm.
3164
-
-
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) for wall lining (veneer work), /bands 200mm wide backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately).Granite of any colour and shade -Area of slab upto 0.50 sqm.
791
-
-
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade -Area of slab over 0.20 sqm but upto 0.50 sqm.
299
-
-
Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.
509
-
-
Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
337
-
-
Flush Door (Laminated ) Providing and fixing of 35mm solid cored flush door with 1mm thick laminate in approved shade as per selection on both side as shown in the drg. All exposed edges covered with PVC tape of matching shade of laminate . Rate shall Include Frame of Indian teak wood , SS Handle, Lock , Door Stopper, Door Closer, S.S. heavy duty hinges etc. all materials and labour etc. complete as per detail drawing and instruction of engineer‐in charge and consultant.
1797
-
-
Providing, fixing and assembling of factory made wardrobe or cupboard 600mm deep in bedrooms, dressing rooms or like area with 18/19 mm. thick commercial ply of MR grade (Durian/Duro/Century ) as approved by Engineer -in-charge.) for side, top and for shelves, drawers etc. and 18/19 mm. thick commercial board of MR grade (Durian/Duro /Century ) as approved by Engineer -in-charge.) for shutters, and 6 mm thick ply of MR grade for back and drawer bottom. (Durian/Duro/Century ) as approved by Engineer -in-charge.) for back. All exposed edges of ply and board to be finished with 2 mm thick PVC lipping of approved quality, all exposed surface of cupboard / wardrobe to be finished with 0.8 mm – 1.00 mm thick approved laminate (Durian/Duro /Century ) as approved by Engineer -in-charge.) and all unexposed surface to be finished with 0.60 mm balancing laminate (Durian/Duro/Century ) as approved by Engineer -in-charge.) of approved colour and shade. All necessary hardware of fittings such as telescopic runners, channels, soft close hinges, tower bolts, handles, magnetic catcher, etc. of required sizes and shapes of approved quality. (Ebco/ Hettich/Kitch ) as approved by Engineer -in-charge, as per approved design and direction of engineer-in-charge. (Rate inclusive all fittings and hardware and only front elevation area shall be measured for payment.
1595
-
-
Providing & Fixing of Roller Blinds in screen of Classic roller series of Vista or equivalent of 75% Pvc 25% polyester fabric with openness of 5% ; ensure adequate light & darkening with privacy ; Thickness: 0.63mm(+5%) ; Weight of fabric: 465 GSM (+5%) Fire Resistance NFPA 701, BS 5867 Part-2-Type-A ; colour fasteness of light (8) grade ; Hardware of ROLLER TUBE of High Strength extruded Aluminium alloy anodized 32mm OD with a minimum wall thickness of 1.0mm duly.
IDLER shall be of high strength fiberglass reinforced pol;yster, consisting of an outside sleeve and centre shaft. Sleeve shall provide bearing surface of roller tube and ratate freely on centre shaft, providing smooth quiet and long wearing operation. Fixing BRACKETS & CLAMPS: racket is made of mild steel and zinc plated, Clamp shall be of spring steel of thickness 0.7mm and zinc plated.
BOTTOM RAIL: Extruded aluminium section in a colour matching to the fabric. The fabric shall be enclosed in the suitably created pocket along with the tube. The tube shall be closed from sides with end caps to give a neat look. The BALLCHAIN shall be 2mm diameter cord with 4.5mm diameter acetal balls moulded co-axially to it on 6mm pitch to form an endless ball chain.
1738
-
-
Providing and fixing M.S. grill of required pattern of windows etc. with M.S.. flats at required spacing and frame alround square or round headed bolts and nuts or by screws.including applying a priming coat of red lead paint and two coats of oil painting etc complete (A) Plain grill
32582
-
-
Restroom Cubical: providing and installing ZMS SS Series Restroom Cubicles with all necessary tools hardware, labour, as per the company specs.Providing & Fixing BESCO Cubicle partition system for toilet by using following Materials 12mm thick compact laminate with core of phenol resin treat papers with black color top layer treated with special melamine resin. Adjustable legs with bottom cap of SS 316, door lock with, gravity hinges with cover – combination of mild steel and Nylon PA6And used following AccessoriesAccessories Include: 1. AlumuniumTop Rail (Stainless Steel Grade 304 with Satin Finish)2. SS Coat Hook with Door Stopper Option (Stainless Steel Grade 304 with Satin Finish)3. SS Gravity Hinges (Stainless Steel Grade 304 with Satin Finish)4. SS Latch cum Occupancy Indicator (Stainless Steel Grade 304 with Satin Finish)5. SS “U” Channel (Stainless Steel Grade 304 with Satin Finish)6. SS “F” Channel (Stainless Steel Grade 304 with Satin Finish)7. SS Palm Design Adjustable Foot (Stainless Steel Grade 304 with Satin Finish)8. SS Screws & Inserts(Stainless Steel Grade 304 with Satin Finish) 9.Rubber Lining for Door Stopper Brand
32
-
-
Providing and fixing Hollow metal fire rated doors as per IS 3614-2021 , Pressed Galvanized steel confirming to IS 277 with the following specification. Recommended fire door shall have doors tested at CBRI for rating of 2hrs tested . Individual Test certificates should also be available for glass used in vision lites confirming the required fire ratings /panels being a part of the fire door assembly. Doors should be finished in Thermosetting Powder Coating desired RAL Shades. Manufacturer test certificate shall cover doors Door leaf shall be minimum 49mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 1.20mm minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be Rockwool treated with Viper FRS 881 LH. All doors NSD 12049 shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite shall be as per direction of engineer in charge with a beeding and screws from inside.The glass should be contraflam Door Lite 11 mm of minimum size 350mm x 500mm clear 120 min fire rated and partially insulated (EW120), Clear Toughened, interlatered glass having a sound reduction of 37dB, LT of 86% and compliant to class 2(B)2 category of Impact Resistance as per EN 12600 standard from Saint Gobain. ( Vision panel )both single & double leaf doors and Hardwares should pass European certificate "CE" of conformity / UL with required fire ratings. Any deviation in specification and sheet thickness other than what is mentioned in the test certificates are not allowed. Proper label confirming the type of door and the hourly rating is mandatory. Approved manufacturer Navair International Ltd or equivalent subject to architect’s approval. And should be ISO Certified company. Door frame shall be double rebate profile of minimum size 154mm X 77 mm made out of 1.60mm (16gauge) minimum thick galvanized steel sheet. NDRF 154x77 Frames shall be Butt jointed and field assembled with self bolted. The frames should be finished with Thermosetting Powder Coating in desired RAL Shade. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. All doors and frames shall be finished with Powder coating in desired Shades. Rate should include supply and installation of door and hardware as per application The rate includes the cost of all the materials, labor & T & P required for proper completion of the item decribed above. (For payment purpose the area of opening including door frame shall only be measured). The agency shall provide one number additional door alongwith all frame and fittings for getting it tested from CBRI Roorkee and in case sample fails, additional sets after improvement shall be provided for testing till the item passes in tests, which shall not be included in measurements for payment.
353
-
-
Providing and fixixng of 6mm thick decorative compact HPL laminate as per EN 438-6Type EDS ( Exterior Durable Standard)/ EGS(External General Standard) external wall clading using specially treated acrylic resins under high pressure and temperature and hardened into sheets, thus providing all weather protection and UV resistance on an aluminium powder coated sub structure of aluminium cube chanel having thickness 50x25x1.6mm at corner and 75x25x1.6mm at junction of two panels complete as per manufacturers specifications and direction of engineer in charge.
1045.5
-
-
Providing, supplying, fixing, fabricating, erecting, aligning the structural steel like pivot ,tubular 'T','I" section, angle, plate ,beam, channel section, Bar , hollow box or Z purlins , for built up purlins, roof trusses, columns, side runners, tie beams, sag rods, base plates gusset plates, cap plates, bearing bracing, gantry girders, rails, require support,pipes, including all welded or bolted steel structures of various types with approved I.S.I.mark electrodes, bolts, anchor bolts including cost of thread, Anchor plate cleats etc. in RCC or masonry work, including cutting, bending, welding ,fixing, supplying , Fabricating Decorative fevisted section or any structured member required to complete the job for Trusses, Canopy, doors, Frame, Railing, Entrance gate, pergola, Decorative hanging light , for Electrical, water supply and HVAC structure New window, parking shed or space frame or any other required specified area as shown on drawing and detailed specification or as per design incl. three coats of approved brand primer and two coats of paints, necessary scaffolding, tools tolerance etc. complete as directed by Engineer In Charge. (Payment will be made for weight of metal used in the work) (Work for all the floors)
210
-
-
Design, manufacture and installation of 12 mm dpi system, a complete assembly of extruded Multi / Micro cellular profile UV extruded/protected polycarbonate panels incorporated into a complete system. The Polycarbonate panel system consists coextruded UV protected Multi / Micro cellular structure polycarbonate panel with width of 1040 mm to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam with standing seam height of 10 ‐ 15mm at both sides of the panel. Panels shall be fixed on Purlins with the Z ‐ Type Stainless Steel Fastener/retention clips and connectors. Each fastener shall be min 1mm thick of SS 304 Grade and secured to supporting frame/structure with min 3 numbers of self‐drilling screws so that the Pull Out Load of Fastener exceeds 7000 N (7 KN) when tested as per ISO 6892: 1998 and IS 1608: 2005. Snap‐on connectors to interlock the panels shall have 2‐4 teeth grip‐lock locking mechanism to ensure maximum uplift capability. Panel shall be fixed with additional End cap/Aluminum U / F Profile / Glazing Bar (mill finish) for ends as required. Panel shall be fixed over structural steel / MS purlin (paid separately) by trained & factory authorised installer under direct supervision to complete entire project installation according to the detail technical specifications as per approved architectural drawings.
85
-
-
Supplying and fixing Stainless steel hand Railing of Grade 304 (16 gauge thick sections) with glossy finish consisting of 38 NB or nearest size vertical posts 900 Heigh at maximum spacing @ 1000 mm c/c with suitable cups at bottom and top rail of 50 NB or nearest size & intermediate rails 3 nos of 25 NB or nearest size etc complete at all levels including bending to required profile. Tungsten insert gas welding & all required accessories,grinding & labour etc complete as per design fixing with base slab/concrete or side wall/RCC by suitable fastenre and plates as per Drawing and instruction of Engineer‐in‐Charge. .(work for all floors)
2499.2
-
-
Fabricating, supplying and fixing in position S S daso wall mounted railing for Ramp, staircase and balcony with brush finish and 304 grade as per indian standard and detailed drawing including grinding, cleaning and welded spots with S S finish. (Only length will be paid for payment) 50 mm NB 16 gaugehandrail mounted on wall top rail and 38 mm NB 16 gauge wall brackets support on wall @ 1M C/C, 50mm dia x 6mm thk plate, anchor fastner, machine srew, errecting and position grouting to be fixed / installed etc complete as per detailed drawing etc comp. (work for all floors)
578
-
-
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces
12
-
-
Providing and laying polished Kota stone slab flooring over 20mm (Average )thick base of cement mortar1:6 (1-cement:6-coarse sand) or L.M.1.1.5 (1-Lime putty:1.5- coarsesand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc.complete.(A) 25mm thick(work for all the floors)
2664
-
-
Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on10mm thick cement mortar 1:3 (1-Cement :3 coarses and) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete.(work for all the floors)
399.25
-
-
Providing & laying Light & Dark Colored Polisehd Granite slab (18mm thick) flooring For Staircase Tread,Landing over 20 mm (average) thick base of Cement Mortar (1‐Cement :6‐Sand) using cementitious Adhesive Materials as per EIC instruction. Granite slab shall be laid and jointed with grey cement slurry. The size of granite should be in full leght of Riser and Tread as per design. Rates are including rubbing, polishing Moulding /Rounding of edges, making two lines of Grooves on each tread for antisleep, laying and removing of floor protection sheet etc. complete. (work for all the floor Staircase
6342
-
-
Providing & laying Granite slab (18mm thick ‐ river wash) in riser of steps dedo, Skirting and pillars laid 15 mm thick Cement Mortar 1:3 (1Cement:3 Coarse Sand) using cementitious Adhesive Materials as per EIC instruction. Granite slab shall be jointed with the Grey Cement Slurry Rates are including rubbing, polishing Moulding / Rounding of edges, laying and removing of floor protection sheet etc. complete.(work for all the floors)
2892
-
-
Providing & laying flooring 24" x24" in flooring Anti skid / matt finished Full Body Homogenous double charged Vitrified 10 mm thick tile flooring (Any colour shade aproved by Consultants) over up to 20mm ( ave ) base of C.M. 1:6 using cementinious Adhesive Materials as per EIC instruction. New surface finished with the help of white cement, cement colour if require, filler of approved make and cleaning the surface etc. comp. for antiskid For flooring, landing, in desired colours, finishes fully polished, Matt, Satin, Satin Guard with flush pointing in white cement & pigment with residue incl. curing,polishing & cleaning with mild oxalic acid etc. complete for all floors / all levels etc. ) Light & Dark colour Rates are including laying and removing of floor protection sheet etc. complete.(work for all the floors)
7394.8
-
-
Providing & laying flooring 36" x36" in flooring Anti skid / matt finished Full Body Homogenous double charged Vitrified 10 mm thick tile flooring (Any colour shade aproved by Consultants) over up to 20mm ( ave ) base of C.M. 1:6 using cementinious Adhesive Materials as per EIC instruction. New surface finished with the help of white cement, cement colour if require, filler of approved make and cleaning the surface etc. comp. for antiskid For flooring, landing, in desired colours, finishes fully polished, Matt, Satin, Satin Guard with flush pointing in white cement & pigment with residue incl. curing,polishing & cleaning with mild oxalic acid etc. complete for all floors / all levels etc. ) Light & Dark colour Rates are including laying and removing of floor protection sheet etc. complete.(work for all the floors)
3494.2
-
-
Providing and laying Vitrified tiles 8to10mm thick, 24''x24'' in skrting risers of steps and dedo on10mm thick cement plaster 1:3 (1-cement:3-coarse sand) and jointed with white cement slurry
676.58
-
-
Providing and laying Vitrified tiles 8to10mm thick,36''x36'' in skrting risers of steps and dedo on10mm thick cement plaster 1:3 (1-cement:3-coarse sand) and jointed with white cement slurry
347.32
-
-
Providing and laying coloured /digital glazed tiles of the size300mm x 200mm x 8mm /300mm x450mm x8mm in skirting, risers of steps and dedo on10mm thick cement plaster 1:3 (1cement :3coarse sand) & jointed with white cement slurry.
7438
-
-
Construction of un‐reinforced, dowel jointed, plain cement concrete trimix pavement M‐30 grade concrete (With Skid Vibrator, Dewatering Pump & Floater) over a prepared sub base with cement , coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant,debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing as per IRC 15 2011 and as per relevant clauses of section 602 of specifications complete but excluding cost of steel in dowel bar and tie rods etc. (Polyfibre ‐ Recron & Hardner should add in concrete on site as per manufacturer's Instruction )
488
-
-
Supply, installation & finishing of Sundek Air-Cush wooden sports flooring system consisting of: The Surface Board: Kiln Seasoned imported Maple wood(Sycamore) surface board finished with 21 mm thick, 50 to 110 mm width and in random length in tongue and groove shape. The edges of the boards will have a finger lock grove and the bottom side with air pass groove and applied with polyurethane lacquer. The Under Frame: Made of commercial quality Fir/Spruce/Pine wood runners of 90/70 mm X 45 mm treated with anti-termite solution and fixed on the bottom side with 10 mm thick air-cushioning pads by nails through the two wings at 300 mm clc. The Installation: A vapour barrier of 6 ml. (600 micron) thick will be placed on the leveled IPS sub-floor before laying the under frame. The runners having air cell cushioning pads will be placed on the vapour barrier in perfect level at 300 mm clc in one direction. The surface boards will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion gap of 8 to 10 mm will be left open between the wooden flooring and the surrounding tiled area/wall The Finishing: After Installation the floor will be machine sanded in uniform level and finished with Imported (Loba –Germany) non-skid DIN certified Polyurethane lacquer. Game line marking will be carried out in required colors before applying the finish coat.
2678
-
-
Supply and installation of approved quality Sundek Sports System or equivalent fixed poles & net for Basket Ball Court as per manufacturers specifications
1
-
-
Charges for making holes in RCC wall, slabs or any other RCC members by diamond core cutting machine including disposing the debris. Measurement will be taken for the depth of holes in running meter. For disposal of the debris as per the disposal item. (work for all the floors) ‐ Holes upto75mm dia
300
-
-
Charges for making holes in RCC wall, slabs or any other RCC members by diamond core cutting machine including disposing the debris. Measurement will be taken for the depth of holes in running meter. For disposal of the debris as per the disposal item. (work for all the floors) ‐ Holes above 75mm upto 100mm dia
300
-
-
Charges for making holes in RCC wall, slabs or any other RCC members by diamond core cutting machine including disposing the debris. Measurement will be taken for the depth of holes in running meter. For disposal of the debris as per the disposal item. (work for all the floors) - Holes above 100mm upto 150mm dia
300
-
-
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet,1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required.Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be prepainted with polyster baked paint, for all heights, as per specifications drawings and as directed by Engineer-in-Charge.
6091.14
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes ,finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutoutsmade with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with -12.5 mm thick tapered edge gypsum moisture resistant board
727.42
-
-
Providing 10 mm thick Cement Plaster in single coat on brick/concrete wall/Ceiling for interior plastering at various level as below finished even and smooth in(i) Cement mortar 1:3 (1‐cement :3‐ sand) as required to receive specified architectural finish (like Grooves, pattern if any, drip mould etc.) to correct line, plumb .etc this item shall be including all heights and levels
28487
-
-
Providing 15mm thick Mala Finished Cement plaster in single coat on brick/concrete wall for interior plastering at various floors, levels and height as below and shown in the drawing finished even and smooth in Cement mortar 1:4 (1‐cement :4‐sand) as required to receive specified architectural finish (like Grooves, pattern if any, drip mould etc.) to correct line level and plumb. this item shall be including all heights and levels
21761.5
-
-
20mm thick Double coat Sand Faced / Mala cement plaster on Exterior walls at for various floors, levels and height as below and shown in the drawing consisting of 12mm thick backing coat of C.M. 1:3 (1‐cement :3‐sand) and 8mm thick finishing coat of C.M. 1:2 (1‐cement :2‐sand) etc. complete. as required to receive specified architectural finish like Vata, Grooves, pattern if any, drip mould etc. to correct line, level and plumb .
13563.5
-
-
Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.
75145
-
-
Wall painting (Three coats) with plastic emulsion paint of approved brand & manufacture on under coated wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.
75145
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade -Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
5073
-
-
Providing and applying exterior texture paint (Flat texture/synthetic paint) of approved make on any height. The rate includes applying one brush coats of PRIMER, On prepared surface final required coat of Semi gloss Medium Textured Flexible coating with crack bridging up to 2.6 MM and VOC content less then 100g/l,required scaffolding, jhulaa,tools and labor. The texture material shall be Pure Acrylic,Environment Friendly, Protect against Salt and Carbon dioxide, with excellent anti‐ Carbonation, UV Resistance,Moisture vapour trasmission coating with third party test certificate applied up to 140 Microns DFT.
13563.5
-
-
Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x24mm x 1.17mm @wt.0.738kg/ m, horizontal three track member size 92mm x 31.75mm x1.30mm @wt1.07kg/m, vertical member of size 92mm x31.75mm x1.50mm @1.06kg/mt with sliding shutters of horizontal member size 40mm x18mmx1.29mm @0.456kg/mt, vertical member of size 40mmx18mmx1.29mm @0.456kg/mt with 5mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glassfixing to frame as per details etc complete for window.
2188
-
-
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
40
-
-
Supply of Luxalon® Aluminium 50 BD Ventilated Façade / Louver System manufactured by M/s. Hunter Douglas India Pvt. Ltd. of approved white colour consisting of panel 50 mm wide x 50mm depth x 0.6mm thick panel length up to 5mtrs coil coated on a continuous paint line double baked and roll formed from enameled corrosion Resistance Aluminum Alloy AA3005 / AA5050 for higher strength and good Roll forming characteristics. Panels shall be mounted in a module of 100 mm on a mullion profile grooved (Slotted Fastening Profile) by means of Clamp, Locking Pop and Pop Rivet (Gap will be 50 mm between two panels). Slotted Fastening Profile shall be fixed at 150 mm from panel ends and at a distance of maximum 1200 mm center to center across the panel span and Slotted Fastening Profile shall be fixed to a suitable sub-structure by means of Square Brackets.Paint Finish:Panel shall be stove enamelled and finished with Luxacote, a patented special three layered coating system (consisting of first a conversion layer of thickness 800-2000mg/sq mtr, a polyurethane basecoat of 16-20 microns, and a special top coat of polyamide particles of 8-12 microns thick to provide excellent abrasion and damage resistance) in a continuous coil coating process of the approved colour on the exposed side and the reverse side with epoxy.
4821
-
-
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawiongs, the aluminium quality as per grade 6063T5or T6 as per BS 1474 including super durable poweder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer -in-Charge The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication extruded aluminium frame work, Nothing extra shall be paid on this account
20240
-
-
Designing, fabricating, testing, protection, installing and fixing in position semi(grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels including: (a) Structural analysis, design and preparation of shop drawings for the specified designloads conforming to IS 875 part III (the system nust passed the proof test at 1.5 times design with pressure without any failure including functional design of the aluminium sections for fixing glasing panels of various thickness, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc. structural and weather silicone sealants, flashings, fire stop (barrier)-cum smoke seats, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including : (b) Fabricating and supplying serrated M.S. hot dip galvanished/ aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect vertically and proper fixing of structural glazing system with the RCC/masonry/structural steel framework of building structure using stainless steel anchor fasteeners/bolts, nylon separator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.(c ) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory/work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade brand and manufacturer, as per the approved sealant design, within and all around the perimeter for holding glass.(d) Providing and fixing in position flashings of solid aluminium sheet 1mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it water tight.(e) making provision for drainage of moisture/water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete.This item includes cost of all inputs of designing labour for fabricating and installation of aluminium grid, installation of glazed units T&P scaffolding and other incidental charges including wastage etc. enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design checked and all the shop drawings vetted by the Principals of the structural glazing system.The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over the building for occupation. In the end the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required as per the Architectural drawings as per item description as specified as per the approved shop drawings and as directed as specified as per the approved shop drawings and as directed by the Engineer-in-charge.1- The cost of providing extruded aluminium frames, shadow boxes, fire stop (barrier)-cum-smoke seals, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub-head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places.2- The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 sqm from the certified laboratories accredited by NABL(National Accreditation Board for Testing and Calibration laboratories) Department of Science & Technologies, India. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work.
2530
-
-
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
2530
-
-
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C kitchen and the like consisting of : Ist course of appying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645in recommended proportions including rounding off junction of vertical and horizontal surface. IInd course of 20 mm cement plaster 1: 3 (1 cement :3 coarse sand) mixed with water proofing compound in recommended proportion including roudnign off junction of vertical and horizontal surface. IIIrd course of applying blown or residual bitument applied hot at 1.7 kg. per sqm of area.IVth course of 400 micron thick PVC sheet. ( Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitument @ 1.7 kg/sqm.)
4659
-
-
Terrace Waterproofing Works - The entire system of supply of material and installation should be done directly by the manufacturer through in-house team with a guarantee of 10 years against leakages Repairing cracks by cutting & making V groove in 25x25 mm, with polymer modified mortar, filling the groove with CM (1:3) mixed with polymer @10% by weight of cement.At the junctions and corners, above the mother slab for a length of 300mm horizontally and 300mm vertically. Providing and applying 2 coats of Flexi PU 270 (i) or equivalent, a single component PU based cold applied seamless waterproofing membrane over the above PUF Layer, coverage at the rate 2.3 - 2.5 kg/m2 in 2-3 coats to achieve DFT of 1.5mm, having Solids 85%, Tensile strength 2 Mpa as per ASTM D 412, Elongation 400% as per ASTM C 1305, crack bridging up to 2mm, Shore A Hardness 70 as per ASTM D 2240, Adhesion to concrete 2Mpa as per ASTM D 903, Water vapor permeability 14gm / m2 / day as per ISO 9932:91, Puncture Resistance 300 N as per, ASTM E154-2013 Water Head Resistance 50M as per DIN 1048. Spray applying an average 65mm thick to achieve the U value of 0.33 W/m2 °k, two component polyurethane Foamshield or equivalent CFC & HCFC free foam, with a core density of 45 kg /m3 (as per ASTM D 1622), thermal conductivity of 0.023 W/m.k at 25°C mean temperature (as per ASTM C518-2017), tensile strength of 350kPa as per ASTM D 1623, compressive strength with rise of 300kPa (as per ASTM D-1621), closed cell content having apparent vol of 90% (as per ASTM D 6226) and fire resistance property conforming to Class B2 as per DIN 4102. Over the entire polyurethane foam, supplying and applying 2 coats of Flexi PU 270 (i) or equivalent, a single component PU based cold applied seamless waterproofing membrane over the above PUF Layer, coverage at the rate 2.3 - 2.5 kg/m2 in 2-3 coats to achieve DFT of 1.5 mm. The PU membrane shall be terminated 300mm above FFL, self-curing for 5 days, then ponding with water for 24 Hrs. to check water tightness up to 50 mm. The Waterproofing material shall have Solids 85%, Tensile strength 2 Mpa as per ASTM D 412, Elongation 400% as per ASTM C 1305, crack bridging up to 2mm, Shore A Hardness 70 as per ASTM D 2240, Adhesion to concrete 2Mpa as per ASTM D 903, Water vapor permeability 14gm / m2 / day as per ISO 9932:91, Puncture Resistance 300 N as per, ASTM E154-2013 Water Head Resistance 50M as per DIN 1048.Supplying & laying 150 gsm Geotextile (non woven polyester) over the entire membrane maintaining proper overlaps.Applying avg of 75 mm thick M20 fibrated grade concrete screed including control joints of 3M X 4M size , making angle fillet of 50mmX50mm using M20 grade concrete at the corners. Exposed filler boards shall be cut by mechanical means and filling the groove with Dr. Fixit Polysulphide Sealant. The width of sealant fill shall not exceed 10mm.Termination: termination of membrane by creating a groove 8mmx25mm in parapet wall and filling it with Dr. Fixit PU Sealant or equivalent.
3492
-
-
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavation earth to an average of 22.5cm depth dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth lead upto 50 metres.
16615
-
-
Construction of granular Sub base providing coarse graded material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per Clause 401. For all grade
2567
-
-
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers in sub‐ base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Codal Provision.
2567
-
-
Providing and fixing pre-cast Rubber Dye/ steel Dye interlocking concrete block 60mm thick with grade of concrete M300 pnumatic compressed/ vibrated mechanically and as per approved design Confirming to IS15658:2006 including 35mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete.
1680
-
-
Providing and ixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M200 grade concret as per approved design and including excavation for fixing in proper line and level ,filling the joint with C:M 1:3(1cement:3 fine sand) etc complete.
179
-
-
Providing and applying primer coat with cationic bitumen emulsion SS1 grade conforming to ASTM GRADE on prepared surface of wet mix macadam including clearing of Wet mix macadam surface with air compressor to remove all loose material other foreign material. The primer shall be sprayed uniformly at the rate of 0.70‐1.0 kg/sqm. It shall be applied by a self‐propelled or towed bitumen pressure sprayer, equipped for spraying the material uniformly at a specified rate. No dilution or heating at site of RS1 bitumen emulsion shall be permitted.
16300
-
-
Providing & applying Tack coat with VG‐30 Grade bitumen using bitumen pressure distributor at the rate of 0.20‐0.30 kg/sqm on the existing bituminous surface cleaned with Air Compressor etc complete. For D.B.M. or B.C.
32600
-
-
Dense Graded Bituminous Macadam (Providing, Carting and laying of dense bituminous macadam with 100‐120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ min 4.5% by weight of total mix, transporting the hot mix to work site,laying with a self‐propelled paving machine equipped with an electronic sensing device to the required grade, level and alignment, rolling with 8‐10 tonne static weight or vibratory roller or with a pneumatic tyre roller of 12 to 15 tonne weight to achieve the desired compaction as per approved design mix . for Grading‐II (26.5 mm nominal size)
2002
-
-
Bituminous Concrete (Providing, Carting and laying of bituminous concrete with 100‐120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ min. 5.5 % of mix, transporting the hot mix to work site, laying with a self‐propelled paving machine equipped with an electronic sensing device to the required grade, level and alignment, rolling with 8‐10 tonne static weight or vibratory roller or with a pneumatic tyre roller of 12 to 15 tonne weight to achieve the desired compaction as per approved design mix. for Grading‐II (13.2 mm nominal size )
2002
-
-
Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc.complete. New work (Two or more coats)
84
-
-
Earthwork for embankment including breaking clods,dressing with all lead and lift and including watering rolling and consolidation of subgrade in layers at O.M.C.to required dry density including filling the depression which occur during the process using power roller 8Tto10T. (E) From Borrow area within 3.0KM. lead
187662
-
-
Carriage of materials including Loading, unloading and stacking complete. - Earth for an average distance of 25 KM
187662
-
-
Supplying and stacking at site dump manure from approved source, including carriage (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20mm
188
-
-
Fine dressing of the ground
5000
-
-
Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and / or good earth to be paid separately).
1688
-
-
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge..
1688
-
-
Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed - With grass Turf
5000
-
-
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing withsludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc.including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately).
500
-
-
Supplying & Stacking of Selection No.1 doob grass turf at site fresh & free from weeds having proper roots in green including loading, unloading, carriage
and all taxes paid etc.and as per direction of officer in charge.
5000
-
-
TOTAL
-
-
-
Sub Head - Plumbing work
-
-
-
Providing & fixing concealed centre point to wall ceiling & floor CPVC SDR‐13.5 PIPE having National Sanitation Foundation (NSF) seal for potable water of 15 mm dia nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc complete.15 mm dia
2662
-
-
Providing & fixing concealed centre point to wall ceiling & floor CPVC SDR‐13.5 PIPE having National Sanitation Foundation (NSF) seal for potable water of 25 mm dia nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc complete.20mm dia
2062
-
-
Providing & fixing concealed centre point to wall ceiling & floor CPVC SDR‐13.5 PIPE having National Sanitation Foundation (NSF) seal for potable water of 25 mm dia nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc complete.25mm dia
1819
-
-
Providing and fixing concealed C‐PVC pipe SDR ‐ 13.5 ISI mark of approved make and specials,clamps, Tube fitting with all required fittings such as reducing coupler, Union, bend plug, end cap, pipe clip, tee, hex nipple, elbow, coupler etc. complete with using bonding material including cutting and making good the walls and ceiling with necessary fittings, connections etc complete and as directed by the Engineer‐in‐Charge. 32 mm dia
1585
-
-
Providing and fixing concealed C‐PVC pipe SDR ‐ 13.5 ISI mark of approved make and specials, clamps, Tube fitting with all required fittings such as reducing coupler, Union, bend plug, end cap, pipe clip, tee, hex nipple, elbow, coupler etc. complete with using bonding material including cutting and making good the walls and ceiling with necessary fittings, connections etc complete and as directed by the Engineer‐in‐Charge. 40 mm dia
1195
-
-
Providing and fixing concealed C‐PVC pipe SDR ‐ 13.5 ISI mark of approved make and specials, clamps, Tube fitting with all required fittings such as reducing coupler, Union, bend plug, end cap, pipe clip, tee, hex nipple, elbow, coupler etc. complete with using bonding material including cutting and making good the walls and ceiling with necessary fittings, connections etc complete and as directed by the Engineer‐in‐Charge. 50 mm dia
865
-
-
Providing and fixing concealed C‐PVC pipe SDR ‐ 13.5 ISI mark of approved make and specials,clamps, Tube fitting with all required fittings such as reducing coupler, Union, bend plug, end cap, pipe clip, tee, hex nipple, elbow, coupler etc.complete with using bonding material including cutting and making good the walls and ceiling with necessary fittings, connections etc complete and as directed by the Engineer‐in‐Charge. 63 mm dia
875
-
-
Providing and fixing concealed C‐PVC pipe SDR ‐ 13.5 ISI mark of approved make and specials,clamps, Tube fitting with all required fittings such as reducing coupler, Union, bend plug, end cap, pipe clip, tee, hex nipple, elbow, coupler etc.complete with using bonding material including cutting and making good the walls and ceiling with necessary fittings, connections etc complete and as directed by the Engineer‐in‐Charge. 80 mm dia
265
-
-
Providing laying and jointing in true line and level 32mm dia.U.P.V.C.Pipe (SCH-40 ) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.
534
-
-
Providing laying and jointing in true line and level 50mm dia.U.P.V.C.Pipe (SCH-40 ) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.
1129
-
-
Providing, laying and jointing in true line and level 160 diametre U.P.V.C (TypeB) conforming to IS13592-1992 with one end plain and othe rend socketed with rubberring, & fittings conforming to ISI14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x149mm length x145mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc.including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.
1225
-
-
Providing, laying and jointing in true line and level 110 diametre U.P.V.C (TypeB) conforming to IS13592-1992 with one end plain and othe rend socketed with rubberring, & fittings conforming to ISI14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x149mm length x145mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc.including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.
4483
-
-
Providing, laying and jointing in true line and level 75 diametre U.P.V.C (TypeB) conforming to IS13592-1992 with one end plain and othe rend socketed with rubberring, & fittings conforming to ISI14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x149mm length x145mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc.including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.
1772
-
-
Providing and fixing PVC SWR nahni trap IS 14735 FOR DRAIN‐100 mm dia meter with jalli of the following nominal diameter of self cleaning design with C.I. screwed down of hinged grating incl. cost of cutting and making good the walls & floors
616
-
-
Providing and fixing PVC SWR nahni trap IS 14735 FOR DRAIN‐75 mm dia meter with jalli of the following nominal diameter of self cleaning design with C.I. screwed down of hinged grating incl. cost of cutting and making good the walls & floors
648
-
-
providing & fixing S.W gully trap with CI grating brick masnoary chamber & water tight CI cover with frame of 300 x 300mm size inside of standard weight with Squre mouth traps @ 150 x 100mm Size P or R type
14
-
-
Construction of BRICK MASONRY CHAMBER for under Ground C.I. inspection chamber and bends with bricks having crushing strength not less than 35 Kg / Cm2 in Cement Mortar (1:5) C.I cover with frame (light duty) 455x610 mm internal dimension, total weight of cover with frame to be not less than 38 kg (wight of cover 23 kg and wt of frame 15 kg) R.C.C top slab with 1:2:4 mix ( 1 cement :2 coarse sand;4 graded stone aggregate 20 mm nominal size )with RCC top slab with CC (1:2:4) mix ( 1 cement : 2 corse sand : 4 gradded aggregate 20 mm nominal size) Foundation concrete 1:5:10, inside plaster 15 mm thick with C:M (1:3) finished smooth with a floating coat of neat cement slurry on walls & bedconcrete etc, complete. Inside dimension of chamber 455 mm x 610 mm x 450 mm deep for single pipe.
16
-
-
Extra over item above item for every additional depth of 0.1 meter or part thereof beyond 450mm depth for brick masonary chamber (I) for 455mmx610mm
6
-
-
ProvidingandlayingCementconcrete1:5:10(1-Cement :5 -Fine sand :10 -Graded stone aggregate 40 mm nominal size) bedding for stone ware pipes of following internal diameters with necessary form work and curing complete.(B) 150mm dia. (166mm Ave. bed thickness
274
-
-
Providinglaying (to level or slopes) and jointing reinforced concrete Light duty non- pressure pipes I.S.class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. (B) 150mm
274
-
-
Providing laying to level or slopes)and jointing reinforced concrete Light duty non-pressure pipes I.S.class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(D) 300mm
662
-
-
Providing and fixing Wash Basin with C.I or M.S. bracket painted with including cutting holes and making good the same but including fitting (A) Vitreous chaina :(II ) Flat back wash basin 550mm x 400mm size in white colour .
233
-
-
Providing and fixing Oval or round shape Counter Wash Basin with C.I or M.S. bracket painted with including cutting holes and making good the same but including fitting (A) Vitreous chaina : size and color selected by architect or as per detail.
101
-
-
Providing and fixing wash down water closet EUROPEAN TYPE W/C PAN with conceled flush tank with intergral "P" or "S" trap including jointing the trap with soil pipe in cement mortar (1:1) ( 1 cement;1 fine sand vitereous china. Rate inclusive of providing and fixing seat cover of the same make.
340
-
-
Providing and fixing 15mm dia wall mounted basin tap (auto closing) code: PRS:061 jaquar make or equvivelant . Including all related material etc. complete.
348
-
-
Providng and fixing screw down bib tap of 15 mm dia 9a) Brass screw down bib tap polished bright jaquar make, florentine series, code: FLR 5047N or equvivelant with all related material etc. complete
340
-
-
Providng and fixing C.P. brass Anglular cock of approved quality. (a) 15mm dia make jaquar florentine series, code: FLR‐5053N or equvivelant with all ralted material etc. complete.
1684
-
-
Providing and fixing S. S. Bottle Tap with necessary concealed fitting and cover panels. All the damages incurred while fixing shall be repaired to the satisfaction of the engineer in‐charge . S. S. Bottle Tap shall be as approved by engineer in‐charge .make jaquar or equvivelant
348
-
-
Providing and fixing Pillar Tap for Sink, capstan head, screw down high pressure with screws,shanks and back nuts (I) 15 mm dia jaquar make or equvivelant with all related material etc. complete.
74
-
-
Providing & Fixing magnifying mirror of approved make. Including providing & fixing screws, washers, cutting & making good the walls.size as per architecture detail.
600.08
-
-
Providing & fixing C.P. brass towel ring fixed to rawl plug with C.P. brass screws.
482
-
-
Supply, instalation, testing & commissioning of gunmetal, male or female threaded isolation control valve (Balll Valve), confirming to IS 778, PN 1.0, with necessary specials, union, nipples etc., to complete the job. ( Internal Toilet Control Valve+ Shaft Area) . - 20mm dia.
552
-
-
Supply, instalation, testing & commissioning of gunmetal, male or female threaded isolation control valve (Balll Valve), confirming to IS 778, PN 1.0, with necessary specials, union, nipples etc., to complete the job. ( Internal Toilet Control Valve+ Shaft Area) . - 32mm dia.
23
-
-
Supply, instalation, testing & commissioning of gunmetal, male or female threaded isolation control valve (Balll Valve), confirming to IS 778, PN 1.0, with necessary specials, union, nipples etc., to complete the job. ( Internal Toilet Control Valve+ Shaft Area) . - 40mm dia.
32
-
-
Supply, instalation, testing & commissioning of gunmetal, male or female threaded isolation control valve (Balll Valve), confirming to IS 778, PN 1.0, with necessary specials, union, nipples etc., to complete the job. ( Internal Toilet Control Valve+ Shaft Area) . - 50mm dia.
6
-
-
Supply, instalation, testing & commissioning of gunmetal, male or female threaded isolation control valve (Balll Valve), confirming to IS 778, PN 1.0, with necessary specials, union, nipples etc., to complete the job. ( Internal Toilet Control Valve+ Shaft Area) . - 63mm dia.
21
-
-
Supply, instalation, testing & commissioning of butterfly valve with dual plat flanze joint , isolation control valve confirming to latest IS , PN 1.0, with necessary specials, bolt and nuts , EPDM gasket all etc., to complete the job.( External Vertical Shaft Riser Control + Ring Main Works) a. 50mm Dia
7
-
-
Supplying, fitting & fixing Non return valve (Spring type Dual plate type) as per API 594/598 , tested to 10 kg/sq.cm etc. complete -50mm dia
10
-
-
Supplying, fitting & fixing Non return valve (Spring type Dual plate type) as per API 594/598 , tested to 10 kg/sq.cm etc. complete - 75mm dia.
10
-
-
Constructing manhole with RCC top slab in 1:2:4 mix (1 cement:2 coarse and :4 graded stone aggregate 20 mm nominal size ) foundation concrete 1:3:6 mix (1 cement :3 coarse sand : 6 brick bats 40 + 50 mm size) inside plastering 15mm th.with cement mortar 1:5 (1 cement :5 coarse sand ) finished with a floating coast of neat cement and making channel in cement concrete 1:2:4 mix (1 cement: 2 Coarse sand :4stone aggregate 20mm nominal size) inside size 900 mm x1200 mm & 1.5 m deep incl C.I.cover with frme size 1)A‐type depth 0.90 m for 150 mm,250(required dia) sewer or Storm Water Drain
58
-
-
Extra rate for constructing B.Bmasonry for every additional depth 0.10meter or part thereof for depth from 1.50 meter to 2.25 meter.
23
-
-
Drilling 215mm dia bore in over burden strata including lowering and fixing of 175mm nominal dia UPVC Pipes up to required depth and further drilling of 165 mm dia bore hole in rocky strata by DTH Rig including fitting of bore plug.
150
-
-
Providing / supplying of 175mm nominal dia Plain casing UPVC Pipe CS‐Type at store of site of standard length with necessary couplers,cement solvant, joint alongwith required cement solvant including and tests shall be conforming to IS 12818 / 1992 with latestfreight/Insurance/Octroi / Taxes etc. complete detailed specifications amendment.
6
-
-
Lowering of Submersible pumpset complete with required nos and size of Column pipe ( GI / HDPE pipe) erected by means of proper chain pulley block & pipe wrenches after checking of threads of eachpipe with coupling to take the load of the pumpset and pipe assembly filled up with water with trail testing,wiring GEB test report.
1
-
-
Supplying submersible pump set for bore of 150 mm. dia. Or more having 3 phase motor capacity not more than 12.5 H.P. and having (12 Stage) 390 to 350 L.P.M. discharge at the head about 95 to 107 mtrs. suitable for 50 mm dia. Delivery pipe Cat.II
1
-
-
Flat PVC cable size 4.0 sq.mm
10
-
-
Supplying & Fixing 50 mm dia UPVC column pipe approved make with necessary fittings like long threaded couplins, bend, T, Elbow, etc. required as per directed
150
-
-
Providing best quality of well sorted `sevalia` gravel of size 4 mm to 6 mm including loading, unloading, carting upto site of work stacking etc complete as directed.
5
-
-
Supplying, Installation, Testing & Commissioning of Sewage Treatment Plant[STP] of Capacity 150,000 Liters per day including the cost of freight charges, all civil works including necessary materils required for STP installation, Operation & Maintenance for 5 Yrs of Plant &any consumable ,Electricity cost during O&M Period will be boren by client, etc as per instruction of EIC. The Installation shall be supervised by the vendor's technical engineer.
1
-
-
Total of Plumbing Work
-
-
-
Sub Head - Furniture work
-
-
-
Dining Table -Table top of 25mm thick made up of 25mm Pre-Laminated Particle Board OF SIZE: 1200MML x 800 MMD x 750MMH and Verical Member Made up of M.S. SQ pipe 50X50X1.6MM thick and all Horizontal Members from M.S. Sq. Pipe 40X40X1.6MM thk. Under-structure is powder coated through 7 tank process. Provision of Designer molded leveler and Leg Caps.
81
-
-
Dining Chair - Complete Body Made Up Of Glass Filled PP Compound •Epidium Leg Bushes To Avoid Scratches On Delicate Floor•Capable To Take 200 Kgs Vertical Load •Scratch Resistant Surface •Available In Blue , Light Green , Red , Pink & Orange
306
-
-
Single Bed -Providing /Placing and Installing Ergonomically designed ROBUST BED of size 1050W X 2050 L X 850 H. 75mm thick eight piece assly decorative designed Headboard as assly of Top panel, Middle Panel, Base Panel, LH & RH Bent Leg , Spacer, TOP & Top patti made up of 15 mm thick Melamine finished Pre-laminated MDF board confirms to ISI 12823:1990. & 15 mm thick Europian PVC Foiled MDF board confirms to ISI 14587:1998.
footboard assembly of 18mm thick base panel, 15mm thick Side & Top Patti made up of Prelaminated MDF board with Europian PVC Foiled Decorative TOP Patti made up of 25mm thick MDF.Vertical & Side Rail made up of 15 mm thick Melamine finished Pre-laminated MDF board confirms to ISI 12823:1990.All edges are sealed with PVC edge-band of 0.45mm thick. Hardware used from standard range. PVC bushes are fixed at bottom to avoid scratches on dedicated floors. All the material used for this must satisfy quality norms from IS standards. Boards used must be able to pass 4H test for Scratch resistivity. Decorative paper using for pre-lamination must be imprignated through MF resine. Support Structure:- Top & Side Panel shall be fixed on Epoxy Powder Coated Metal Frame of 25mm X 25mm X 1.2mm Thk & 50mm X 25mm X 1.2mm THK M.S. Tube. To give robust support to bed.All Metal parts are Duly Powder Coated with minimum 45-50 Microns thickness.
288
-
-
Double Bed - Providing Placing and Installing Wooden Modular Double (Queen Size) Bed of Size 1730(W) X 2300(D) X 900(H) 75mm thick eight piece assly decorative designed Headboard as assly of Top panel, Middle Panel, Base Panel, LH & RH Bent Leg , Spacer, TOP & Top patti made up of 15 mm thick Melamine finished Pre-laminated Particle board confirms to ISI 12823:1990. & 15 mm thick Europian PVC Foiled MDF board confirms to ISI 14587:1998. 33mm thick footboard assembly of 18mm thick base panel, 15mm thick Side & Top Patti made up of Prelaminated Particle board with Europian PVC Foiled Decorative TOP Patti made up of 25mm thick MDF.Vertical & Side Rail made up of 15 mm thick Melamine finished Pre-laminated Particle board confirms to ISI 12823:1990.All edges are sealed with PVC edge-band of 0.45mm thick. Hardware used from standard range. PVC bushes are fixed at bottom to avoid scratches on dedicated floors. All the material used for this must satisfy quality norms from IS standards. Boards used must be able to pass 4H test for Scratch resistivity. Decorative paper using for pre-lamination must be imprignated through MF resine.
50
-
-
Bed Side Table - Providing /Placing and Installing Bed Side Unit of size 420W X 400 D X 450 H made up of 18mm thick Pre-laminated board.
exposed edges to be sealed with 2mm edgeband Rehau make non-exposed edges to be sealed with 0.8mm edgeband Rehau make, hardware used shall be of Ebco or Hettich make.
PLB used to be of ISI grade (Shade to be from standard range of Action Tesa, Associate,Greenlam and Spacewood).All Wooden panels shall be stained to approved color finished with melamine and scratch resistivity to pass 4H test.
288
-
-
Sofa -Providing / Placing and Installing Three Seater PVC Sofa of size1925(W) X 840(D) X 900(H) 445(Seat ht.)
Specification :- Frame made up of Meranti Wood and Plywood. Arm Rest foam density 18 with polyster, Back rest foam density 15 with webbing belt and polyster. Seat foam density 25 + rebond foam with webbing belt and polyster.
Color :- Full PVC Dark Brown
18
-
-
Providing / Placing and Installing Two Seater PVC Sofa of size1325(W) X 840(D) X 900(H) 445(Seat ht.)
Specification :- Frame made up of Meranti Wood and Plywood. Arm Rest foam density 18 with polyster, Back rest foam density 15 with webbing belt and polyster. Seat foam density 25 + rebond foam with webbing belt and polyster.
Color :- Full PVC Dark Brown
50
-
-
Providing / Placing and Installing One Seater PVC Sofa of size725(W) X 840(D) X 900(H) 445(Seat ht.)
Specification :- Frame made up of Meranti Wood and Plywood. Arm Rest foam density 18 with polyster, Back rest foam density 15 with webbing belt and polyster. Seat foam density 25 + rebond foam with webbing belt and polyster.
Color :- Full PVC Dark Brown
66
-
-
Center Table -Providing / Placing or Installing Center Table or TEA Table of Size 800 W X 400 D X 420 H
Leg Made up of 18mm thick PVC foiled MDF with Joint free finish. Bottom Panel from 18mm Prelaminated MDF board duly edge-banded with 0.8mm thick PVC edge-band from Rehau. Top Made up of 8mm thick clear Toughened Glass.
70
-
-
Study chair -Providing /Placing and installing Study Chair – Tilt Machanism, Chrome base, PP arms, High density of cushion on seat, nylon net on back, Gas lift for height adjustment, Lumbersupport.
338
-
-
Study Table -Providing /Placing and Installing STUDY TABLE with 1 Drawer & 1 Openable shutter 1200(W) X 600(D) X 750(H).
Table TOP from 25mm, Gable End, Modesty, Vertical, Drawer, Shutter are from 18mm thick Pre-laminated MDF board. All exposed edges sealed with 2mm thick PVC edge-band of REHAU make and 0.45mm thick for Non-Exposed edges. Bottom Mounted slide used for Drawer and individual locking provided for both the shutter and Drawer. Table with leveler provision.
All Wooden panels shall be stained to approved color finished with melamine and scratch resistivity to pass 4H test.
418
-
-
Conference Table -Table Top of 54mm thick made up of 18mm Pre-laminated Particle Board with 18+18mm double color decorative batten fixed below top on user and visitor side. Gable end of 54mm thick made up of 18mm Pre-laminated particle board with 18+18mm double color decorative batten fixed on it from visitor side. Modesty of 18mm PPB. All Exposed edges are sealed with PVC edge-band of 2mm thickness & Non-exposed edges are sealed with 0.45mm thick Edge-band from REHAU. - SIZE: 2700W X 1200d x 750H
1
-
-
Providing Table Tenis Ping pong Table size 2750mmX 1520mmX 760mm equiped with centre net complete as per IITF specifications.
2
-
-
Providing Billiard/ Pool Table size 2400mmX 1370mmX 780mm complete as per specifications of approved manufacturer.
6
-
-
Conference Chair - Back & seat from high density cushion with crome structure, m.s. crome arms, 5 prong crome base with twin wheel castors, torsion bar free floating mechanism with single angle locking, tension adjuster & gas lift mechanism.
10
-
-
Supplying approved make domestic refrigerator of 165 ltr to 185 Ltr storage capacity, single phase minimum 3 star rating.
60
-
-
Supplying & erecting horizontal / vertical mounting type storage water heater with copper container housed in MS/SS body insulated with glass wool / puff complete with heating elements adjustable thermostats 30˚C to 85˚C, indicating lamps, safety valve, fusible plug etc. complete erected with coach bolts, nuts, washers & cementation. (C ) 25 Ltr with 2 KW, heating element - Cat - II
329
-
-
Providing modular kitchen in residential quarters andGuest Rooms as per scope of work defined in schedule of finishes and specifications and as per architectural drawing.
38
-
-
SITC of Kitchen equipments in Dinning block i.e Bench weighing scale machine, Insectocuters for catching Flys, Air Curtain, Conveyour type dishwaher, DRYER, ICE Cream Freezer, SALAMENDER, Bain Marie For making Soup, Tea URN, Sandwich Griller, DECK OVEN STAND FOR COMBI OVEN, BURNER RANGE, MICROWAVE OVEN, KITCHEN MIXI etc. including planning and designing by incorporating stipulated specifications, all E&M works related services on design, built and handover basis including all works as per scope for Work and user requirement, all complete including defect liability period for three years from the date of handing over as per direction of Engineer in Charge.
1
-
-
Total of Furniture Work
-
-
-
Sub Head XVII Electrical Work
-
-
-
Point wiring for light/bell with 2X1.5 sq. mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length in below type of pipe erected with 6A Modular type switch/bell push & accessories and earth continuity of following type erected on PVC/metallic/wooden Box single mounting base frame, covered with textured/metalic white front plate modules erected on / in wall / ceiling as per pipe erected with necessary lamp holder/ ceiling rose/ H.D Connector as directed. g) with 16 SWG HGS metal conduit pipe and accessories painted black erected concealed in wall/ceiling complete. -Cat II
5315
-
-
Point wiring for Fan with 2X1.5 sq. mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length in below type of pipe erected with 6A Modular type switch and num free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC/ metallic /wooden Box single mounting base frame, covered with textured/ metalic white front plate modules erected on / in wall / ceiling as per pipe erected with necessary ceiling rose/ H.D Connector as directed.g) with 16 SWG HGS metal conduit pipe and accessories painted black erected concealed in wall/ceiling complete. -Cat II
1250
-
-
Providing following type of Modular type Accessories mounted with PVC/metallic.wooden box, single mounting base frame covered with textured / metallic / white front plate, modules erected with necessary connections as per site situation directed by Engineer in charge.(1) One no. SP 6 Amp. - Cat II
1640
-
-
Providing following type of Modular type Accessories mounted with PVC/metallic.wooden box, single mounting base frame covered with textured / metallic / white front plate, modules erected with necessary connections as per site situation directed by Engineer in charge.(9) 16Amp, SP one way switch -Cat II
1183
-
-
Providing following type of Modular type Accessories mounted with PVC/metallic.wooden box, single mounting base frame covered with textured / metallic / white front plate, modules erected with necessary connections as per site situation directed by Engineer in charge. (10 ) 6/16 Amp, Universal socket - Cat II
2823
-
-
Providing following type of Modular type Accessories mounted with PVC/metallic.wooden box, single mounting base frame covered with textured / metallic / white front plate, modules erected with necessary connections as per site situation directed by Engineer in charge.(12) 6Amp. / 16 Amp. Two Way switch - Cat II
49
-
-
Providing following type of Modular type Accessories mounted with PVC/metallic.wooden box, single mounting base frame covered with textured / metallic / white front plate, modules erected with necessary connections as per site situation directed by Engineer in charge.(14) 20 A Double pole Modular MCB switch - Cat II
735
-
-
Providing & erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked standard copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq.mm copper conductor FRLS PVC insulated standard wire of green colour for earth continuity of following size. - (B) with 16 swg HGS metal conduit pipe and accessories painted black. (A) 2 wire 1.5 sq.mm
7600
-
-
Providing & erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked standard copper conductor wire in following type of pipe to be erected in / on wall / ceiling, with 2.5 sq.mm copper conductor FRLS PVC insulated standard wire of green colour for earth continuity of following size. with 16 swg HGS metal conduit pipe and accessories painted black.(a) 2 wire 4 sq. mm
32500
-
-
Providing & erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked standard copper conductor wire in following type of pipe to be erected in / on wall / ceiling, with 2.5 sq.mm copper conductor FRLS PVC insulated standard wire of green colour for earth continuity of following size. with 16 swg HGS metal conduit pipe and accessories painted black.(b) 2 wire 6 sq. mm
13210
-
-
Providing & erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked standard copper conductor wire in following type of pipe to be erected in / on wall / ceiling, with 2.5 sq.mm copper conductor FRLS PVC insulated standard wire of green colour for earth continuity of following size. with 16 swg HGS metal conduit pipe and accessories painted black.(g) 4 wire 4 sq. mm
11300
-
-
Providing & erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked standard copper conductor wire in following type of pipe to be erected in / on wall / ceiling, with 2.5 sq.mm copper conductor FRLS PVC insulated standard wire of green colour for earth continuity of following size. with 16 swg HGS metal conduit pipe and accessories painted black.(H) 4 wire 6 sq. mm
1080
-
-
Providing & erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked standard copper conductor wire in following type of pipe to be erected in / on wall / ceiling, with 2.5 sq.mm copper conductor FRLS PVC insulated standard wire of green colour for earth continuity of following size. with 16 swg HGS metal conduit pipe and accessories painted black.(I) 4 wire 10 sq. mm (use earth wire of 4 sq. mm)
1900
-
-
Point wiring for individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin plug erected on PVC/metallic/wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.(I) For 6A Plug and 6A switch with 2X1.5 sq.mm Cu wire from nearby switchboard/MCB DB board. (j) in existing pipe erected concealed in wall/ceiling complete. -Cat II
1679
-
-
Point wiring for individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin plug erected on PVC/metallic/wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. - For 16A Plug and 16A switch with 2X4 sq.mm cU wire with 2.5 sq.mm (Green) earthing wire from MCB DB Board.(j) in existing pipe erected concealed in wall/ceiling complete. -Cat II
1131
-
-
Providing following type of Modular Type Accessories mounted with PVC / metallic/wooden box, single mounting base frame covered with textured/metallic / white front plate, modules erected with necessary connectors as per site situation directed by Engineer In Charge. -TV Coaxial socket outlet
174
-
-
Providing following type of Modular Type Accessories mounted with PVC / metallic/wooden box, single mounting base frame covered with textured/metallic / white front plate, modules erected with necessary connectors as per site situation directed by Engineer In Charge. -Bell push
69
-
-
Providing following type of Modular Type Accessories mounted with PVC / metallic/wooden box, single mounting base frame covered with textured/metallic / white front plate, modules erected with necessary connectors as per site situation directed by Engineer In Charge. -Modular Buzzer
69
-
-
Providing & Erecting approved make RG-6 TV Co axial flexible cable comprising inner condutor of solid bare copper insulated with foam PE & secondary conductor made of poly-aluminium film bonded Al braces suitable coverage overall sheathed with black PVC insulation.
5050
-
-
MDB - L- (HOSTEL) Fabrication, supply, installation, testing and commissioning of wall/floor maounted cubicle type LT panels suitable for 415 V 3 phase, 4 wire, 50 Hz AC supply system (IP 42 degree of protection) fabricated in compartmentalized design from CRCA sheet made out of 2 mm thick for frame work & covers 3mm thick for gland plates including cleaning & finishing complete with 7 tank process for powder coating in approved shade, having TPN Al alloy bus bars of high conductivity, DMC/SMC bus bar supports with short circuit withstand capacity of 31 MVA for 1 sec, bottom base channel of MS section. Entire panel shall have a common copper earth bar of size as per CPWD specification at the rear with 2 Nos earth stud, interconnections from main busbar to switch gears with required size of AL bus bar and control wiring with PVC insulated FRLS copper conductor single core cable, cable alleys, cable gland plates etc. providing following switch gears: Note: All the MCCBs of capacity more than 250 Amp should be Microprocessor based and below 250Amp it should be Thermal Magnetic based .Incoming: 400 A, FP MCCB 36 KA - 1 No. 500 A TPN AL. bus bar with coloured heat shrinkable PVC sleeve -1 Set. Outgoings: 63 A TPN MCCB, 25 KA - 2 Nos. 100 A TPN MCCB, 25 KA - 4 Nos, 40 A TPN MCB - 2. Nos.315 A TPN MCCB, 36 KA - 1 Nos. Instruments: Multi Function Meter (MFM) with CTs & Fuses/MCB/Selecter Switch -1 Set .Indication lamp RYB with Fuses/MCB etc. as req.
1
-
-
MDB - P- (HOSTEL) - Fabrication, supply, installation, testing and commissioning of wall/floor maounted cubicle type LT panels suitable for 415 V 3 phase, 4 wire, 50 Hz AC supply system (IP 42 degree of protection) fabricated in compartmentalized design from CRCA sheet made out of 2 mm thick for frame work & covers 3mm thick for gland plates including cleaning & finishing complete with 7 tank process for powder coating in approved shade, having TPN Al alloy bus bars of high conductivity, DMC/SMC bus bar supports with short circuit withstand capacity of 31 MVA for 1 sec, bottom base channel of MS section. Entire panel shall have a common copper earth bar of size as per CPWD specification at the rear with 2 Nos earth stud, interconnections from main busbar to switch gears with required size of AL bus bar and control wiring with PVC insulated FRLS copper conductor single core cable, cable alleys, cable gland plates etc. providing following switch gears: Note: All the MCCBs of capacity more than 250 Amp should be Microprocessor based and below 250Amp it should be Thermal Magnetic based.Incoming: 1000 A, FP ACB 50 KA - 1 No. 1200 A TPN AL. bus bar with coloured heat shrinkable PVC sleeve -1 Set.Outgoings: 630 A, FP MCCB 36 KA - 1 No.400 A TPN MCCB, 36 KA - 1 Nos. 200 A TPN MCCB, 25 KA - 1 Nos. 100 A TPN MCCB, 25 KA - 1 Nos. Instruments: Multi Function Meter (MFM) with CTs & Fuses/MCB/Selecter Switch -1 Set .Indication lamp RYB with Fuses/MCB etc. as req.
1
-
-
MDB - E (Res. Block 2BHK ) - Fabrication, supply, installation, testing and commissioning of wall/floor maounted cubicle type LT panels suitable for 415 V 3 phase, 4 wire, 50 Hz AC supply system (IP 42 degree of protection) fabricated in compartmentalized design from CRCA sheet made out of 2 mm thick for frame work & covers 3mm thick for gland plates including cleaning & finishing complete with 7 tank process for powder coating in approved shade, having TPN Al alloy bus bars of high conductivity, DMC/SMC bus bar supports with short circuit withstand capacity of 31 MVA for 1 sec, bottom base channel of MS section. Entire panel shall have a common copper earth bar of size as per CPWD specification at the rear with 2 Nos earth stud, interconnections from main busbar to switch gears with required size of AL bus bar and control wiring with PVC insulated FRLS copper conductor single core cable, cable alleys, cable gland plates etc. providing following switch gears: Note: All the MCCBs of capacity more than 250 Amp should be Microprocessor based and below 250Amp it should be Thermal Magnetic based . Incoming: 250 A, TPN MCCB 36 KA - 1 No. 300 A TPN AL. bus bar with coloured heat shrinkable PVC sleeve -1 Set.Outgoings : 100 A TPN MCCB, 25 KA - 3 Nos.63 A TPN MCCB, 25 KA - 3 Nos. 40 A DP MCB, 10 KA - 3 Nos. 32 A DP MCB, 10 KA - 3 Nos. Instruments: Multi Function Meter (MFM) with CTs & Fuses/MCB/Selecter Switch -1 Set.Indication lamp RYB with Fuses/MCB etc. as req.
1
-
-
FDB - L&P (Housing-First Floor) Incoming: 63 A, FP MCCB 25 KA - 1 No.200 A TPN AL. bus bar with coloured heat shrinkable PVC sleeve -1 Set.Outgoings:40 A DP MCB - 6 Nos. Instruments: Multi Function Meter (MFM) with CTs & Fuses/MCB/Selecter Switch -1 Set Indication lamp RYB with Fuses/MCB etc. as req.
1
-
-
FDB - L&P (Housing-Second Floor) Incoming:100 A, FP MCCB 25 KA - 1 No. 200 A TPN AL. bus bar with coloured heat shrinkable PVC sleeve -1 Set .Outgoings: 40 A DP MCB - 10 Nos.Instruments: Multi Function Meter (MFM) with CTs & Fuses/MCB/Selecter Switch -1 Set.Indication lamp RYB with Fuses/MCB etc. as req.
1
-
-
FDB - L&P (Housing-Third & Fourth Floor) Incoming:100 A, FP MCCB 25 KA - 1 No.200 A TPN AL. bus bar with coloured heat shrinkable PVC sleeve -1 Set Outgoings:40 A DP MCB - 6 Nos. Instruments: Multi Function Meter (MFM) with CTs & Fuses/MCB/Selecter Switch -1 Set Indication lamp RYB with Fuses/MCB etc. as req.
2
-
-
MDB - L&P (Director Residence) Incoming:100 A, FP MCCB 25 KA - 1 No. 200 A TPN AL. bus bar with coloured heat shrinkable PVC sleeve -1 Set.Outgoings:63 A TPN MCB, 10 KA - 2 Nos.63 A DP MCB, 10 KA - 3 Nos.Instruments: Multi Function Meter (MFM) with CTs & Fuses/MCB/Selecter Switch -1 Set.Indication lamp RYB with Fuses/MCB etc. as req.
1
-
-
LIFT PANEL FOR HOTEL BLOCKS (2 Lifts) - Incoming:100 A, FP MCCB 25 KA - 1 No.200 A TPN AL. bus bar with coloured heat shrinkable PVC sleeve-1 Set, Outgoings:63 A TPN MCCB, 25 KA - 2 Nos. 32 A DP MCB - 2 Nos. Instruments: Multi Function Meter (MFM) with CTs & Fuses/MCB/Selecter Switch -1 Set. Indication lamp RYB with Fuses/MCB etc. as req.
3
-
-
MDB - L- (SAC Block) Incoming:315 A, FP MCCB 36 KA - 1 No. 400 A TPN AL. bus bar with coloured heat shrinkable PVC sleeve -1 Set.Outgoings:63 A TPN MCCB, 25 KA - 7 Nos.100 A TPN MCCB, 25 KA - 3 Nos.200 A TPN MCCB, 25 KA - 1 Nos.32/40 A TPN MCB - 3. Nos.Instruments: Multi Function Meter (MFM) with CTs & Fuses/MCB/Selecter Switch -1 Set Indication lamp RYB with Fuses/MCB etc. as req.
1
-
-
MDB - P- (SAC Block)Incoming:630 A, FP MCCB 50 KA - 1 No.800 A TPN AL. bus bar with coloured heat shrinkable PVC sleeve -1 SetOutgoings:250 A TPN MCCB, 36 KA - 2 Nos.100 A TPN MCCB, 25 KA - 6 Nos.63 A TPN MCCB, 25 KA - 1 Nos.63 A TPN MCB - 4 Nos.Instruments: Multi Function Meter (MFM) with CTs & Fuses/MCB/Selecter Switch -1 Set Indication lamp RYB with Fuses/MCB etc. as req.
1
-
-
Kitchen Panel - (SAC Block) Incoming:250 A, FP MCCB 36 KA - 1 No.300 A TPN AL. bus bar with coloured heat shrinkable PVC sleeve -1 SetOutgoings:40 A TPN MCCB, 25 KA - 3 Nos.63 A TPN MCCB, 25 KA - 4 Nos.100 A TPN MCCB, 25 KA - 3 Nos.63 A DP MCB - 6. Nos.32 A TPN MCB - 3. Nos.25 A TPN MCB - 3. Nos.20 A TPN MCB - 5 Nos.Instruments: Multi Function Meter (MFM) with CTs & Fuses/MCB/Selecter Switch -1 Set Indication lamp RYB with Fuses/MCB etc. as req.
1
-
-
AHU Panel - (SAC Block)Incoming:200 A, FP MCCB 36 KA - 1 No.300 A TPN AL. bus bar with coloured heat shrinkable PVC sleeve -1 SetOutgoings:63 A TPN MCCB, 25 KA - 9 Nos.Instruments: Multi Function Meter (MFM) with CTs & Fuses/MCB/Selecter Switch -1 Set Indication lamp RYB with Fuses/MCB etc. as req.
1
-
-
Providing & erecting Approved make energy meter 3 phase 4 wire unbalanced load rating, 10 A to 60 Amp based on ASIC (Application specific Integral circuits) digital technology with accuracy class -1, temper proof, free from effect of external magnetic field with 3 phase indication, earth & impulse indication, 6 digit electro mechanical impulse counter, suitable work on 120 V to 300V per phase 45-55 Hz, housed in robust enclosure with erection as directed. - cat II
21
-
-
Supply, installation,testing and commissioning of LT Distribution and Meter Board of 2 mm thick sheet steel cubical design for indoor mounting factory fabricated suitable for operation on 440 V 3 phase, 50 Hz, A.C. supply with MCCBs/MCB and other accessories, all in compartmentalised, cubical construction complete in all respects including mounting plate for KWH Meter, hinged lockable cover with window for Meter reading and internal wiring, labels, ferrules, cable termination gland plates, earth terminals, painting etc. conforming to specifications. Distribution and Meter Board for 4 Three phase Meters Incoming:100 A FP MCCB, 25 KA - 1 Nos.Bus Bar:-1 Set of 200 Amps. TPN busbars of aluminium alloy with colour coded heat PVC shrinkable sleeves.Outgoing:-Provision for Meter cubicals for Three phase KWH Meter -4 Nos.63 A TPN MCB, - 2 Nos.SITC of Distribution and meter board described as above.
10
-
-
Providing and erecting approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 KA and above at 415 V, having normal current rating 630A, with variable thermal & magnetic release suitable to work on AC supply 50c/s with all internal connections & cpomplete erected in existing 16 G.M.S housing.- cat II
2
-
-
Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S.housing cat II
1
-
-
Providing and erecting approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA at 415 V, having normal current rating up to 25A to 100A, with fixed thermal & magnetic release suitable to work on AC supply 50c/s with all internal connections & cpomplete erected in existing 16 G.M.S housing. cat II
79
-
-
Providing & erecting sheet steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for(A) Single phase incoming and horizontal single phase outgoing(b) sheet steel double door (IP-43)8 way Double door
4
-
-
Providing & erecting sheet steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for(A) Single phase incoming and horizontal single phase outgoing(b) sheet steel double door (IP-43) 12 way Double door
4
-
-
Providing & erecting sheet steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for(A) Single phase incoming and horizontal single phase outgoing(b) sheet steel double door (IP-43)16 way Double door
30
-
-
Three phase incoming and single phase horizontal type outgoing per phase isolation type (PPI)(b) sheet steel double door4 way Double door
2
-
-
Three phase incoming and single phase horizontal type outgoing per phase isolation type (PPI)(b) sheet steel double door 6 way Double door
30
-
-
Three phase incoming and single phase horizontal type outgoing per phase isolation type (PPI)(b) sheet steel double door 8 way Double door
33
-
-
Three phase incoming and single phase horizontal type outgoing per phase isolation type (PPI)(b) sheet steel double door 12 way Double door
56
-
-
Providing & erecting sheet steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted double door (IP-54) fitted with copper insulated busbar, isolated neutral bar, earth bar and DIN rail, confirms to IS 8623-1 & 3, IEC 61439-1 & 3, suitable for 250 Amp TPN MCCB + RCCB as incomer and three phase outgoing as per following (The DBs should be used of same company of MCB to be used) (A) 4 way outgoing
36
-
-
supplying & erecting sheet steel powder coated cable end termination Box to be mounted on Top or Bottom of MCB Distribution Box for housing / Covering Extra wires & cables suitable for following size of MCB Db Box.(C) Single phase 8 way
64
-
-
supplying & erecting sheet steel powder coated cable end termination Box to be mounted on Top or Bottom of MCB Distribution Box for housing / Covering Extra wires & cables suitable for following size of MCB Db Box.(D) Single phase 12 way
4
-
-
supplying & erecting sheet steel powder coated cable end termination Box to be mounted on Top or Bottom of MCB Distribution Box for housing / Covering Extra wires & cables suitable for following size of MCB Db Box.(F) Three phase 6 way
28
-
-
supplying & erecting sheet steel powder coated cable end termination Box to be mounted on Top or Bottom of MCB Distribution Box for housing / Covering Extra wires & cables suitable for following size of MCB Db Box.(G) Three phase 8 way
55
-
-
supplying & erecting sheet steel powder coated cable end termination Box to be mounted on Top or Bottom of MCB Distribution Box for housing / Covering Extra wires & cables suitable for following size of MCB Db Box.(H) Three phase 12 way
30
-
-
Providing & erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C system and having breaking capacity 10 KA to be erected in existing box confirming to IS 8826/1996 with ISI mark. cat II
3086
-
-
Providing & erecting 240 V MCB double pole switch for motor & inductive load (C curve) having breaking capacity 10 KA & confirms to IS 8828 in the existing box having following capacity (A) 6 to 32 Amp cat II
38
-
-
Providing & erecting approved make ELCBs / RCCBs confirming to IS : 12640 and having sensitivity of 30 mA and short circuit withsatnd capacity of 10KA and suitable for operation on single phase 240 V, 50 Hz having characterstic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max rating erected as directed - 40 Amps DP cat II
188
-
-
Providing & erecting approved make ELCBs / RCCBs confirming to IS : 12640 and having sensitivity of 30 mA and short circuit withsatnd capacity of 10KA and suitable for operation on single phase 240 V, 50 Hz having characterstic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max rating erected as directed - 63 Amps DP cat II
213
-
-
Providing & erecting double pole Miniature Isolator A.C.22 duly confirms to IS 13947-3 240 V 40 A in existing box.cat II
5
-
-
Providing & erecting Four pole Miniature Isolator A.C.22 duly confirms to IS 13947-3 in existing box. (a) for 40 amps -Cat II
50
-
-
Providing & erecting Four pole Miniature Isolator A.C.22 duly confirms to IS 13947-3 in existing box. (b) for 63 amps Cat II
71
-
-
Providing & erecting 415 V MCB three pole for motor & inductive Load (C curve) having 10KA breaking capacity & confirms to IS 8828 in existing box having following capacity (b) 40 amps Cat II
72
-
-
Providing & erecting 415 V MCB three pole for motor & inductive Load (C curve) having 10KA breaking capacity & confirms to IS 8828 in existing box having following capacity (c) 63 amps Cat II
94
-
-
Providing & erected metallic vitrified danger notice board as per language suggested by Engineer Incharge for MEDIUM VOLTAGE installation to be erected as per IS-2551.
56
-
-
Rising Mains & Cables - Providing & erecting sandwitched type bus duct having following specification: sandwich type busbar for use as feeder busbar for interconnection between separate electrical equipment / load centers and for use as plug in busbar risers. The busbar shall be suitable for operation in a 690V / 1000V system with frequency of 50 Hz system can be either earthed or unearthed, impulse voltage should be 12 KV; Standard. Rising mains shall include the Tap of Boxes, MCCb, End feed unit etc. comlete as required. Aluminium Bus(A) 200/400 Amps capacity
46
-
-
Rising Mains & Cables - Providing & erecting sandwitched type bus duct having following specification: sandwich type busbar for use as feeder busbar for interconnection between separate electrical equipment / load centers and for use as plug in busbar risers. The busbar shall be suitable for operation in a 690V / 1000V system with frequency of 50 Hz system can be either earthed or unearthed, impulse voltage should be 12 KV; Standard. Rising mains shall include the Tap of Boxes, MCCb, End feed unit etc. comlete as required. Aluminium Bus(B) 500/630 Amps capacity
94
-
-
Providing & fixing approved make Perforated C type Cable tray, made from sheet steel. The cable tray should be single or double bended as per required and as per IS 2062 / 1079 and shall be coated with hot dip galvanizing as per IS 2629/4759 with max 17.5% perforation with coupler plate / fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support included) as per specification and as per instruction of Engineer In charge.- 150 x 50 x 1.6 mm thick
280
-
-
Providing & fixing approved make Perforated C type Cable tray, made from sheet steel. The cable tray should be single or double bended as per required and as per IS 2062 / 1079 and shall be coated with hot dip galvanizing as per IS 2629/4759 with max 17.5% perforation with coupler plate / fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support included) as per specification and as per instruction of Engineer In charge.- 300 x 50 x 2.0 mm thick
140
-
-
Providing and erecting XLPE (IS:7098) - BB ISI armoured cable multistrand aluminium conductor for 1.1 KV . To be laid on wall with necessary clamps or in existing trench / pipe of following size of cables.(B) 3.5 core 50 sq. mm (25 sq. mm 0.5 core)
290
-
-
Providing and erecting XLPE (IS:7098) - BB ISI armoured cable multistrand aluminium conductor for 1.1 KV . To be laid on wall with necessary clamps or in existing trench / pipe of following size of cables.(C) 3.5 core 70 sq. mm (35 sq. mm 0.5 core)
290
-
-
Providing and erecting XLPE (IS:7098) - BB ISI armoured cable multistrand aluminium conductor for 1.1 KV . To be laid on wall with necessary clamps or in existing trench / pipe of following size of cables.(e) 4 core 25 Sq. mm
370
-
-
Providing & fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete with outgoing tails insulating tape etc. for following size of cables.(A) 3.5 / 4 core 25 Sq. mm
50
-
-
Providing & fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete with outgoing tails insulating tape etc. for following size of cables.(B) 3.5 core 35/50 sq. mm
64
-
-
Providing & fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete with outgoing tails insulating tape etc. for following size of cables.(B) 3.5 core 70 sq. mm
8
-
-
Solder less crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly climped with high pressure tool & connected to switchgear terminals with brass / cadmium plated nut bolts in an approved manner.(C) 16/25 Sq.mm.
50
-
-
Solder less crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly climped with high pressure tool & connected to switchgear terminals with brass / cadmium plated nut bolts in an approved manner.(D) 35/50 sq. mm
64
-
-
Solder less crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly climped with high pressure tool & connected to switchgear terminals with brass / cadmium plated nut bolts in an approved manner.(E) 70 sq. mm
8
-
-
Installation, testing and commissioning of prewired, fluorescent fitting / LED fittings of all types , complete with all accessories and tube etc. directly on ceiling/wall, including connections with 1.5 sq.mm. PVC insulated, copper conductor, single core cable etc. as required.
213
-
-
Supplying and erecting LED Indoor fittings with LEDs of wattage 0.2 watt to 0.5 watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet steel confirming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 120 to 300 V, power factor more than 0.9, THD 10%, CCT 3000 K to 65 K. Luminiare efficacy 85 lumens/watt. LED efficiency 110 lumens/watt, LED driver efficiency 85%. CREE/OSRAM/PHILIPS Lumileds/NICHIA/SEOUL/Bridgelux make LED used for luminiare (fitting required LM-79 & LM-80 certificates )( Note: below description have shown ranges of wattage capacity of LED fittings. The Engineer Incharge may select any wattage capacity between the ranges shown).(c Square / circular shaped surface/ recessed mount downlight with provision for spring loaded mounting clips complete. Ip 20(a) 5-9 watts, surge-2 KVCat - II
99
-
-
Supplying and erecting LED Indoor fittings with LEDs of wattage 0.2 watt to 0.5 watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet steel confirming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 120 to 300 V, power factor more than 0.9, THD 10%, CCT 3000 K to 65 K. Luminiare efficacy 85 lumens/watt. LED efficiency 110 lumens/watt, LED driver efficiency 85%. CREE/OSRAM/PHILIPS Lumileds/NICHIA/SEOUL/Bridgelux make LED used for luminiare (fitting required LM-79 & LM-80 certificates )( Note: below description have shown ranges of wattage capacity of LED fittings. The Engineer Incharge may select any wattage capacity between the ranges shown).(c Square / circular shaped surface/ recessed mount downlight with provision for spring loaded mounting clips complete. Ip 20(a) 11-15 watts, surge-2 KVCat - II
3438
-
-
Supplying and erecting LED Indoor fittings with LEDs of wattage 0.2 watt to 0.5 watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet steel confirming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 120 to 300 V, power factor more than 0.9, THD 10%, CCT 3000 K to 65 K. Luminiare efficacy 85 lumens/watt. LED efficiency 110 lumens/watt, LED driver efficiency 85%. CREE/OSRAM/PHILIPS Lumileds/NICHIA/SEOUL/Bridgelux make LED used for luminiare (fitting required LM-79 & LM-80 certificates )( Note: below description have shown ranges of wattage capacity of LED fittings. The Engineer Incharge may select any wattage capacity between the ranges shown).(c Square / circular shaped surface/ recessed mount downlight with provision for spring loaded mounting clips complete. Ip 20(a) 16-20 watts, surge-2 KVCat - II
131
-
-
Tube light with integral driver5-9 watts, surge-2 KV, IP-20, 2 feetCat - II
349
-
-
Tube light with integral driver 16 - 20 watts, surge - 2 KV, IP-20, 4 feet cat II
330
-
-
Tube light with integral driver 36 watts, surge - 2 KV, IP-20, 4 feet cat II
173
-
-
(D) LED Panel light with provision for plane front frame with translucent cover fixed to housing complete IP 20.36 watts, 24" x 24" mm, surge-2 KV, Cat - II
144
-
-
Providing and erecting PVC body surface or pendant mounting LED Bulk type 9 watt Lighting fitting with electronic driver and lumen output from luminiare 720 lm, input voltage range 90-300 VAC, 50 Hz cool white (3000 to 6500 K), inbuilt driver, 20 degree C to + 60 deg C working temperature, AL frame with Beam Angle 120 deg.
144
-
-
Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD 10 %, CCT 3000 K to 5700K, Uniformity ratio 0.45, Luminaire efficacy 100 lumens/watt . LED driver efficiency 85 %.CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)(B) Flood Light (IP-65), Surge -4KV,Light must have 440VAC line supply protection. It should withstand 48 hours for 440VAC line supply(d) above 90 to 120 watts- Cat-II
24
-
-
Supplying & erecting of LED type High bay fixture having power consumption of following watts with, (input voltage 110 - 290 V AC with full efficiency, power factor 0.9 with 50/60 Hz, CCVC LED driver used for maximum power saving. Best quality Aluminium alloy housing and aluminium Dome for better heat dissipation, CCT Cool white ( 6000 K), CRI 80, Beam angle 120 degrees, working temperature -20 deg. C to +55 deg.C Body IP 65.(B) 90 to 150 watts
28
-
-
Providing and erecting decorative wall bracket fittings complete with LED lamp and rust free fittings components mounted in chrome finish housing with holder ,clear/opaque glass diffuser complete erected with lead wires with minimum 15 wattage capacity as per instruction engineer incharge/ architect/ authority .cat-III
163
-
-
Supplying of Linear Suspended LED fitting with a nominal system Wattage = 36-40 W, System Lumen = 4000,system efficacy at System level (Not Chip Level) 110lumens/watt, Life of fixture 50000hrs@L70% Lumen maintenance, CCT Range 5700-6500 K, CRI 80, PF 0.95, THD 9%. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire shall meet IP20 rating. The luminaire housing should made of pressure die cast aluminium and the luminaire optics shall have a high efficiency diffuser with more than 85% transmittance. Model should be equal to havells destelo generation-2- DESTG250LP /S36WLED 857SWH1130 or similar from approved make list.
112
-
-
Supplying of LED Recessed/ surface Downlighter with a nominal system Wattage = 40-45 W, System Lumen = 4400-4950,system efficacy at System level (Not Chip Level) 110lumens/watt, Life of fixture 50000hrs@L70% Lumen maintenance, CCT Range 5700-6500 K, CRI 80, PF 0.95, THD 9%. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire shall meet IP20 rating. The luminaire housing should made of pressure die cast aluminium and the luminaire optics shall have a high efficiency diffuser with more than 85% transmittance.The fixture should comply with the parameters as per IS10322.
40
-
-
Supply of 5-6 W LED Exit & matter at per site requirement Light with inbuilt battery backup of 2 hours, including drivers, fixing accessories complete as required. The fixture should have sufficient intensity and all fixing arrangement complete as required at site. Bajaj : BESL 03 LED DSD WBB Red/Green or equivalent of Decon and Insatpower
49
-
-
Supply of Ceiling Hanging (Chandelier) 3 Light Pendant Type each with 20W LED fitting complete with electronic driver and LED lamp etc directly on Ceiling including connection with 1.5Sqmm FRPVC insulated copper conductor cable and earthing the body as required of approved Make
4
-
-
Supply of Ceiling Hanging Light with 30W LED fitting complete with electronic driver and LED lamp etc directly on Ceiling including connection with 1.5Sqmm FRPVC insulated copper conductor cable and earthing the body as required of approved Make.
18
-
-
Supplying, installation, testing and commissioning of suitable sweep, BEE 5 star rated, Ceiling fan with Brush Less Direct Current (BLDC) Permanent ferrite magnet motor, class of insulation B, Rust free 3 Nos. Aluminium Blades, 2 nos. canopies, shackle kit with earthing provision, 22 gauge copper winding, power factor not 0.9, service value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM, 230 V (tolerance as per IS 374-2019), THD 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), suitable for 140 to 285 Voltage and rectifier circuit with surge, over current and overload protection, 50 Hz, single phase AC supply, earthing etc. complete as required. (Make shall be approved by Engineer In Charge)(B) 1200 mm sweep (48")
545
-
-
Supplying, installation, testing and commissioning of suitable sweep, BEE 5 star rated, Ceiling fan with Brush Less Direct Current (BLDC) Permanent ferrite magnet motor, class of insulation B, Rust free 3 Nos. Aluminium Blades, 2 nos. canopies, shackle kit with earthing provision, 22 gauge copper winding, power factor not 0.9, service value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM, 230 V (tolerance as per IS 374-2019), THD 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), suitable for 140 to 285 Voltage and rectifier circuit with surge, over current and overload protection, 50 Hz, single phase AC supply, earthing etc. complete as required. (Make shall be approved by Engineer In Charge)(C) 1400 mm sweep (54")
300
-
-
Supplying & erecting Single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM 305 mm dia. 900 RPM, Cat II
395
-
-
Supplying & erecting Single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM 450 mm dia. 1400 RPM, Cat II
10
-
-
Providing suitable M.S. louver shutter of the Exhaust Fan.
405
-
-
Supplying & erecting approved make oscillating type bracket fan A.C. 230 V, 50 cy/s 400/450 mm sweep wall mounted with height adjustment and rotary tilting device complete with guard, flexible core plug top complete erected with lead wires as directed. Cat - II
2
-
-
Supplying, installation, testing and commissioning of Microwave technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10 A, for mounting height up to 2.6 meter and for 5m X 20m coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.
6
-
-
Supplying & erecting funnel type earthing having earth plate of following size burried in specifically prepared earth pit 3 mtr, below ground with 40 kg charcoal and salt with alternate layers of charcoal & salt, 20 mm dia GI pipe with funnel with a wire mesh for watering & bricks masanory block CI cover complete as per para 7.3 of IS 3043 with necessary length of double Galvanized Iron / copper earth wire no. 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I pipe 2.5 mtr long complete connected to the nearest switch gear with end socket as per direction & duly tested by earth tester confirming to IS (As per drawing) with following Specification.(B) with 45 x 45 x 0.35 cms. G.I. earth plate
22
-
-
Supplying & erecting funnel type earthing having earth plate of following size burried in specifically prepared earth pit 3 mtr, below ground with 40 kg charcoal and salt with alternate layers of charcoal & salt, 20 mm dia GI pipe with funnel with a wire mesh for watering & bricks masanory block CI cover complete as per para 7.3 of IS 3043 with necessary length of double Galvanized Iron / copper earth wire no. 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I pipe 2.5 mtr long complete connected to the nearest switch gear with end socket as per direction & duly tested by earth tester confirming to IS (As per drawing) with following Specification.(c ) with 60 x 60 x 0.315 cms. Copper earth plate
6
-
-
Providing and erecting required size HOT deep galvanized iron strip for earthing of H.T, OCB/ACB/Transformer LT panel board, motors etc. using proper clamp.
1070
-
-
Providing and erecting required size Copper strip for earthing of H.T, OCB/ACB/Transformer LT panel board, motors etc. using copper clamp.
340
-
-
Providing and erecting Hot deep Galvanized Iron strip wire 8 to 16 SWG.
1200
-
-
SITC of Vertical Air Terminal Solid aluminium with base-10 mm dia and 1000 mm long. Air Termination base tested for conditioning, ageing test & Lightening impulse current withstand test: 100 KA of 10/350 Us waveform in an accerdited third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST 34 mm dia 3000 mm long-Cold Galvanized.
13
-
-
SITC of 10 mm MS Round solid conductor having smooth surface should be tested and use exclusively for lightening protection (vertical Riser / down conductor which shall be concealed in column) to meet the requirement of IS IEC 62305 with accessories. Earthing stud of dimensions SS-75 mm OD plate with 10 mm dia tail connector used in structural steel ring earthing system to meet the requirement of IS / IEC 62305. (For interconnecting the column and Terrace AL Conductor / strip/ flat SS cross connector to connect Earth fixing oint to vertical raiser / down conductor. SS straight splicer at every 4 mtr to connect MS conductor in column. Bonding / Rehar clamp at every 3 mtr suitable for innerconnecting round conductor with reinforcement inside the concrete for structural earthing system, SS connector - To connect external conductor 8-10 mm with earth fixing point. All accessories shall be test as per IEC 62561 I 2018 CI.6.3 for conditioning & ageing test & 6.4 for lightening impulse current withstand test:100 KA of 10/350 Us waveform (Ageing & Electrical test) conducted in a sequence manner & tested in the Govt. accerdited Third party laboratory to meet the requirements of IS/IEC6230.
13
-
-
SITC of Galvanized steel flat 25X6 mm thickness from earth electrode directly in ground as required. Zinc coating 500 g/m square (approx 70 micron coating) tested used exclusively for lightening protection earthing system and ring equipment bonding.
300
-
-
SITC of 14.2 mm dia 3 mtr long earth electrode of high tensile steel electrode with 250 micron copper bonding & 1 bag of carbon fill based environment friendly backfill tested as per IEC 62561-7 in NABL accerdited Laboratory and suitable stainless steel double sided clamp. Eco friendly rust proof heavy duty weather proof polythylene earth pit chamber with following dimensions: 254 mm dia (top) 330 mm dia (bottom) & 260 mm (height).
13
-
-
Providing & erecting ISI mark Medium class RIGID PVC Pipes of following size complete to be erected on / in wall or ceiling erected with necessary PVC fittings & junction boxes fixed with adhesive solution & clamps with following dia of pipes, in approved manner as directed. (b) 25 mm
12700
-
-
SITC of CAT6 UTP 23 AWG Solid; per meter
38000
-
-
SITC of Jack Cat 6 Keystone UTP
697
-
-
Supply , Installtion , Testing and comissioning of 15U wall mount rack with fans, 5 cable managers, satationary shelf, 2 Nos of hardware pkts & 5Nos. 6/16A sockets PDU also complete as required.
11
-
-
SITC of 800 mm x 1000 mm 42 U Free standing cabinet with front locable door , side panels, 230 V AC 90 CFM fan 2 , three Hardware packet 1 set (containing 20 Nos each of 3), AC power strip. Cantilever Tray 1U 225D, one earthing Strip 150 mm H,1 Cable manager 1U height.
2
-
-
SITC of Cat 6 UTP 24 AWG Patch Cord; 1 M, plug 30U snag less
697
-
-
SITC of Cat 6 UTP 24 AWG Patch Cord; 2 M, plug 30U snag less
692
-
-
SITC of Patch Panel Cat 6 UTP keystone type-24 Port Fully Loaded.
42
-
-
SITC of Face palte - Dual (Keystone Jack square)
697
-
-
SITC of O.F. cable 06F Outdoor- Armoured Unitube SM - HDPE sheath
1150
-
-
SITC of LIU 12 Port Rack Mount - Loaded (LC) SM
18
-
-
SITC of Pigtail LC SM Simplex Length 1 M
38
-
-
SITC of Patch Cord LC - LC SM Duplex Length - 3M
40
-
-
SITC of 20 x SFP ports 4 x Combo 10/100/1000 Base - T / SFP Ports, 4 x 10 G SFP+ Ports, 6kV surge protection on all RJ-45 access ports Switch Resource Management (SRM) for flexible management of system resources Redundant Power Supply (RPS) support MPLS L2VPML3 VPN support full L3 routing protocol support including OSPF, BGP and ISIS for IPv4/IPv6 SDN-enabled switch, compatible with openflow 1.3, 10 -GBE SFP+ to SFp+1M direct attach cable
2
-
-
SITC of 24 x 10/100/1000 Base-T PoE ports, 5 x Gigabit RJ 45/ SFP Combo ports advanced L2 switching and security features L2+ static routing optional " Standard mode" or " surveillance mode" management user interface 193 W PoE budget.
42
-
-
SITC of Maximum distance of up to 10 Km Hot pluggable Single Mode Fiber 1000 Base-LX (IEEE 802.3z standard) Duplex LC connector, MSA, RohS Complaint.
104
-
-
Supplying, installation, testing & commissioning for Indoor Access Point, should support dual-band 802.11abgn/ac/ax Wireless Access Point with Multi-Gigabit Ethernet backhaul and onboard BLE/ZIgbee,, 4x4:4 streams (5GHz) 4x4:4 streams (2.4GHz), OFDMA, MU-MIMO, BeamFlex+, dual ports, 802.3at PoE suppor.Device should have atleast 5 years of support & shall be with all accessories as required.
68
-
-
Supplying, installation, testing and commssioning of dedicated hardware based wireless controller with 4x10G SFP+ & 4x 1G SFP ports, populated with 100 Access points license with 5 years support from Day-1. The controller should support Unique PSK, AP Survivability, WIDS/WIPS, scalable to 1000 APs or more. Should support
1
-
-
SITC of Digital / PCM / TDM EPABX system having SMT design, system with flexible universal slots inbuilt Auto attendant facility, minimum 15 nos. conference , Analog extension line, Calling GSM, E&M line, PRI / EI & VOIP programme through Analog telephone digital key from Ethernet public address card, shall have unrestricted simultaneous dialing facilty, OSIG protocol on PRI 95 / STD / ISO / Local- locking class of service, quick Dial-single digit dialing of any two external number, once only ring device, boss/seceratery , Do not disturb facility, power Down Mode, Hot line, Hot outward dialing, Day night mode, Auto call back, Barge-in, call pick up & call transfer, call transfer while ringing with voice guide system (DSA), caller ID (CLI), CLI base ECF, CLI base routing internet ready port, external music port, call budgeting, call most calculation (ASMDR), DID Direct inverse dialing, external music input, FAX homing, global Directory pPrinting with following capacities.(E ) No. of Extension 128, No. of junctions 24, No of Expendable ports:512, Operator Console-01, Compatible : ISDN and Networking
1
-
-
SITC of IP Card for IP Trunk & IP Extension No. of Expendable Port : 112
1
-
-
SITC of IP Extension License per User
159
-
-
SITC of 16 digit CLI LCD, Toggle mute, 2 Way speaker, 40 I/C memory, 10 O/G memory, redial, Auto Add "0" , DND, Adj. LCD & Ring Volume, Ring Melody 16.
159
-
-
Supplying, installation, testing & commissioning of Analogue Addressable Smoke Sensor which is fully compatible with Analogue Addressable protocol, having removable high performance chamber with Twin line LED;s allow 360 degree viewing, user selectable sensitivity modes 1% to 4.5% obs/m, incorporate optical elements, lock mechanism (sensor to base) Electronically addressed, pulshing / non - pulshing controlled from panel. Approved by LPCB & VdS.
289
-
-
SITC of Analogue Addressable Multi- Heat Sensor which is fully compatible with Analogue Addressable Protocol,having removable high performance chamber with Twin fire LED's allow 360 degree viewing, User selectable sensitivity modes 0 to 88 degree Celsius, Incorporates Fixed Temperature and Rate Of Rise Heat elements, lock mechanism (sensor to base), Electronically addressed, Pulsing/non-pulsing controlled from panel. Approved by LPCB (EN54: Part 5)
8
-
-
Supplying, installation, testing & commissioning of Analogue Addressable Single Output Module which includes a single output flying leads for easy installation, Electronically addressed, Approved by LPCB & VdS.
76
-
-
Supplying, installation, testing & commissioning of Intelligent loop powered wall sounder which provide a range of tones and volumes with a maximum output of up to 102 dB(A) (+-2dB(A) with low current consumption, 51 user selectable tones (all tones EN54-3 Compatible). Approved by LPCB & VdS.
76
-
-
Supplying, installation, testing & commissioning of Analogue Addressable Manual Call point with Integral Short Circuit Isolator, Analogue addressable protocol having bi coloured status LED (Red for Alarm, Amber for for (short circuit), non trangible element fitted as standard (confirms to EN 54) pulsing/non-pulsing can selectable via panel, electronically addressed Approved by LPCB.
76
-
-
Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.
76
-
-
Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.
18
-
-
Supplying, installation, testing & commissioning of intelligent interface unit BACnet/ Modbus protocol i.e. supplying communication links between building management system and fire alarm control panel complete as required.
1
-
-
Supplying, installation, testing & commissioning of fault isolator complete with base as required.
21
-
-
Supplying, installation, testing & commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required.
1
-
-
SITC of Microprocessor based Net-workable Analogue Addressable Fire Alarm Control Panel. The Panel shall be complaint with EN54-2, EN54-4 and approved by LPCB. The Fire Alarm Control Panel shall have ibuilt one loop and expandable capacity upto 2 loops. The Panel must have large graphic display. The Panel must have also the capacity to to take Addressable Intelligent wired and wireless devices on same loop. Each loop shall have a capacity of 127 analogue addressable devices and 127 base sounders/base sounder baecons. The Panel shall have 240 V AC power supply along with Automatic battery charger. Approved by LPCB.
3
-
-
SITC of Controller
Heart of Plina Voice Alarm system
EN-54 16 Certified
Built In message manager and 240 W Amplifier
Six Zone Outputs 6 Emergency and 6 business triggers.
3
-
-
Supplying, installation, testing & commissioning of ceiling speaker 6W metal complete as required.
374
-
-
Supply, installation, testing & commissioning of power amplifier, 2X500W 2X 500 W Class-D power Amplifier (70 / 100 V output) low power consumption in standby mode. Excellent sound quality, high Signal to Noise Ratio EN-54-16 and ISO 7240-16 system certification.
5
-
-
SITC of call station for 6 zone stylish six zone call station, intended for LBB 1925/10 system pre-Amplifier Unidirectional Condenser microphone on flexible stem Six zone selection keys, all call key and momentary PTT - key for calls selectable gain, speech filter, and limiter for improved intelligibility selectable priority levels and different pre and post call chimes LED indications for zone selection, system actively and call station status.
3
-
-
Providing & erecting 16 gauge HGS conduit pipe (as per IS)painted black surface / concealed of following size complete to be erected on / in wall or ceiling with erected with necessary saddles, screws, bends, junction boxes etc. with following (Nominal bore ) dia of pipes, in approved manner as directed. - 25 mm
5700
-
-
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. speaker cable Single pair, 2-core, 1.5 sqmm
4200
-
-
Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/PVC as required. 2 x 1.5 sq. mm
3300
-
-
Supply, Installation, Testing & Commissioning of 2MP IP Network TDN Low-Light IR Rugged Dome Camera, 1/2.8" CMOS or better, 2MP (1920 x 1080) @ 25fps or better, triple stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux @ F1.6 (color), 0 Lux IR On, 4 IR LEDs Smart IR with upto 50m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265 & H.264 High Profile & MJPEG , Triple stream, 2.7 to 13.5mm 5X motorized focus & zoom lens, Field of View FoV H:88°-24°, BLC, HLC, 3DNR White Balance, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 4 Privacy Mask, 8 Region Of Intreset, Defog, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, Dual channel Audio, Alarm: 1In/ 1out, 256GB SD card support, PoE (802.3 af) and 12V DC, Max 6W, IP 67, IK 10 vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S/G/T compliant, UL/CSA 62368-1, CE (EN 50130-4), FCC Part 15, EN 55032, RoHS (EN63000) & NDAA Section 889 compliant.
12
-
-
Supply, Installation, Testing & Commissioning of 2MP IP Network TDN Low-Light IR Rugged Bullet Camera, 1/2.8" CMOS or better, 2MP (1920 x 1080) @ 25fps or better, triple stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux @ F1.6 (color), 0 Lux IR On, 4 IR LEDs Smart IR with upto 60m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265 & H.264 High Profile & MJPEG , Triple stream, 2.7 to 13.5mm 5X motorized focus & zoom lens, Field of View FoV H:80°-24°, BLC, HLC, 3DNR White Balance, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 4 Privacy Mask, 8 Region Of Intreset, Defog, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, Dual channel Audio, Alarm: 1In/ 1out, 256GB SD card support, PoE (802.3 af) and 12V DC, Max 6W, IP 67, IK 10 vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S/G/T compliant, UL/CSA 62368-1, CE (EN 50130-4), FCC Part 15, EN 55032, RoHS (EN63000) & NDAA Section 889 compliant. ( Axis/Avigilon/ Bosch/ Honeywell Enterprise)
148
-
-
Supply, Installation, Testing & Commissioning of Outdoor 1/2.8 inch CMOS 5MP or better, IR PTZ Camera, Effective pixels 2592 x 1944, 5MP, 25 fps; 30x Optical Zoom & 16x Digital Zoom, tripple stream; IR distance: 150 meter; Lens type: Wide 5 to 6mm, Tele 150 to -180mm Motorized Auto focus zoom lens; Memory card slot: Min 256GB support. Minimum Illumination- Sense up on- Color: 0.005 lux color, B/W: 0 lux IR On, WDR 120dB, Edge Video Analysis Video Motion Detection, Intrusion, Lioter, Counter & Tampering, 3DNR, BLC, HLC, White Balance, EIS, Defog, Mechanical switchable IR filter (Auto ICR), Pan Range 360° continuous, Tilt Range -10° to 90°, Pan/Tilt Modes - Pan: 0.1°/s - 180°/s; Tilt: 0.1°/s - 90°/s, Presets 256, Preset Accuracy 0.25 Deg, 16 Patrol & Tours, Alarm I/O - 2In/2Out, 2-Way Audio- 1/1 Channel In/Out, 256GB Memory card slot, 4 individually configurable privacy masks, 8 Region of Interest, POE+ (802.3 at) or 24VAC 3A for indoor/Outdoor application, IP66/67, IK 10 ; Certifications: ONVIF Profile S/G/T compliant, UL/CSA 62368-1, CE (EN 50130-4), FCC Part 15, EN 55032, RoHS (EN63000) & NDAA Section 889 compliant. Approved Makes ( Axis/Avigilon/ Bosch/ Honeywell Enterprise)
3
-
-
Supply, Installation, Testing and commissioning of Monitor, 55" LED high resolution monitor with high performance 240VAC, 50 Hz. 24x7 for spot display including all accessories as per specifications and as required to complete the system.
6
-
-
SITC of 128 Channel Network Video Storage Manager Server - NSM shall have Intel® Xeon Silver 4210R, 2.2 GHz or better, Mnimum 32GB RAM, 1+1 750W hot plug redundant power supply, OS drive: 2 x 240 GB in RAID 1; 12 field upgrade up to 20 TB SATA/SAS hard drive options for Video Recording, Data RAID Level: 0, 1, 5, 6, 10. NIC card 4 x 1GbE supporting network throughput of 800 MBPS, Windows Server 2019 R2 64- bit/Windows10 64-Bit IOT Operating System, Microsoft SQL Server/Express 2019. NSM Shall support upto 128 Cameras @ 1080P, 25fps, 09 Remote Client Licenses inbuilt, Web Clients, Monitor Layout up to 4x4, Digital Signature for Video Clip, Continous & Motion Based Recording options, up to 8X forawrd & backward palyback, Playback search as date/time timeline, time jump FWD/REV, bookmarks, calendar, preview, film strip, event search and SMART Motion Search as a min. NVR shall be ONVIF S/G/T certified and liested on ONVIF Website. NVR shall Support Two -Way Audio with cameras equiped with Microphone & Speaker.
Recording to be concidered for 30 days at 2MP, 25 FPS in RAID 5. NSM Shall be offered in N+1 Failover. Approved Makes ( Axis/Avigilon/ Bosch/ Honeywell Enterprise)
2
-
-
Supply, Installation, Testing & Commissioning of Network Video Management Software system for 900 cameras and have scalablity to expand upto 2000 cameras in single server with the following features The NVMMS shall have option to support database redundancy and 1+1 and N+M NSM failover features for unforeseen/maintenance scenarios for increased system reliability,Web client option for simple, no license, no software install applications, Web-based maps with drag-and-drop camera setup, easy cross-site navigation and HTML5 live video pop-up and instant playback, allow quick situational response The NVMMS should support network joystick controller, GPU rendering support for H.264 and H.265 decoding , video on demand, Adaptive video throttling, rule engine, operatore role management, server based Video Motion Detection (VMD), Smart Search, Playback and Clip Export for Efficient Forensic Investigation edge storage backfill support, bookmark with manual comment, bookmark based search, timeline search, Preview search, synchronous playback from all NSMs, monitor wall support, surrounding camera mode, Cybersecured with features such as Digital Signing, General Data Protection Regulation (GDPR) compliance, HTTPS & SSL base, smart web client, secured firewall configuration, password expiry, non-recoverable password; support ANDROID & iOS phones, seamless integration with intgegrated security platform which provides HSDK&API for further integration with 3rd party systems. Cyber Security Features • Enhanced password security – non-recoverable passwords, enforcing complex passwords, password expiry, and no default passwords • Addressed Unauthenticated/Unauthorized channels • Secured firewall configuration • Secured Web client – enabled HTTPS and TLS 1.2, and protection from CSRF and XSS attacks • Restricted folder and Registry access to operators • Secured Assemblies – Digital signing
1
-
-
Supply, installation, testing and commissioning of SERVER station with windows server Iot 2019 complete as specified including all the required OS, Antivirus as per the given specification. Processor - Intel® Xeon® E-2236 3.4GHz Database - Microsoft® SQL Server® 2017 Express Chipset - Intel® C246Memory - 16 GB DDR4 OS Hard Drive - Dual (RAID1) 480GB SSDs for OS Network - 2 x Gigabit Ethernet ports
2
-
-
Supply, installation, testing & commissioning of Client Workstation as per following specifications:Intel Core i7-8700K or better, 4.2GHz, OS - Genuine Microsoft Microsoft® Windows 10 Enterprise/IOT 64 Bit, RAM - 16GB, OS - 480 GB SSD/SATA, Graphic Card - In-built Processor Graphics (GPU):Intel® HD Graphics 630 or Intel Q470 Processor, supporting 2 Monitors, 01 LAN 01GBPS, Audio IN & Out, USB3.0, Keyboard and Mouse, associated cables etc complete. Approved Makes : Pelco / Avigilon / Axis / Allgovision / Dell / HP
6
-
-
Supply , Installation , Testing and commissioning of Surveillance Garde 16TB SATA Hard Disk for above VMRs, including fixing accessories and cable termination with required, complete in all respect as per instruction of engineer in-charge. Recording shall be calculated at 2MP, 25fps for 30 days.
Approved Makes: WD / Segate /Toshiba / HP
21
-
-
Supply, Installation, Testing and Commissioning of 15 Mtr. HDMI Cable. Approved Makes: Aten / Kramer / Extron / BlueRigger
6
-
-
SITC of 13 Passenger, Ground plus 5 upper floors with Rated speed of 1.0 m/sec.
2
-
-
SITC of 13 Passenger, Ground plus 14 upper floors with Rated speed of 2.0 / 2.5 m/sec.
3
-
-
SITC of 26 passengers . Ground plus 14 upper floors with Rated Speed of 2.0 / 2.5 m/sec with micro price/PLC control and ACVVVF drive
3
-
-
SITC of 11 KV HT Switchboard of 4 panels, 1 I/C & 3 O/G panels as above and as per specifications shall be with all accessories, interconnections, internal wiring, labels etc. complete as required.
1
-
-
2000 KVA TRANSFORMER (Cast Resin Dry Type) - Design, manufactuer, Supply, installation, testing and commissioning of Cast Resin Dry Type transformer 2000 KVA 11/0.433 KV, 3 phase, 50 Hz, Dyn11 vector group, double wound copper, class H insulation, indoor type Transformer with approximately 6.25% impedence subject to tolerance as per IS, Off Load tap changer, operation on HV side in steps of + 5% to -7.5%, @ 2.5%, having cable end boxes on HV side suitable for 3x300 Sqmm XLPE cable of 11KV (E) grade and 3200 Amp TPN Sandwitch Bus Duct arrangement on LV side with neutral brought out separately, Marshelling Box etc. & suitable for ambient 50˚C temprature. All Relays, Contacts & CT Terminal to be wired upto marshelling Box suitably mounted on M.S. channel i/c supplying and grouting of suitable M.S. Channel with all accessories and confirming to Latest IS/ IS:2026-11 & IEC 60076-11 & complete in all respects as required at site. Transformer losses shall be as per Latest ECBC Norms.
2
-
-
Main LT Panel ESS (TTA Type) as per specifications and details complete as required.-
1
-
-
Emergency (DG Supply panel ) TTA Panel as per specifications and details above complete as required.
1
-
-
Supply, Installation, testing and Commissioning of 600 KVAR APFC panel complete as required. The APFC Panel shall be fully type tested at an Independent Laboratory and shall comply to IEC 61439-1&2 and IEC 61921.,IS-16636-2017 with details as described above and as per specifications. The APFC Panel manufactured by OEM's or OEM Authorized will be accepted & factory acceptance test ( FAT ) shall be carried out.
2
-
-
Providing & erecting sandwitched type bus duct having following specification: sandwich type busbar for use as feeder busbar for interconnection between separate electrical equipment / load centers and for use as plug in busbar risers. The busbar shall be suitable for operation in a 690V / 1000V system with frequency of 50 Hz system can be either earthed or unearthed, impulse voltage should be 12 KV;
Standard(A) Aluminium Bus(i) 3200 A, Capacity (TR to LT PANEL)
60
-
-
Supply of following size of 11 KV XLPE insulated aluminium conductor earthed and armoured cable conforming to IS 7098 complete as required. 3 Core, 300 sq.mm
200
-
-
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 120 sq. mm and upto 400 sq. mm
150
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 120 sq. mm and upto 400 sq. mm
40
-
-
supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required. 300 sq. mm
6
-
-
Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required. 300 sq. mm
2
-
-
Providing & erecting XLPE (IS:7098()I)-BB ISI armoured cable multistrand / solid copper conductor for 1.1 KV to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables (A) 4 core, 2.5 sq,mm
200
-
-
Supplying, Fixing with End Terminations of 630 sqmm single core 1.1 KV XLPE insulated aluminium conductor earthed and armoured cable conforming to IS 7098 complete as required. Single Core, 630 sq.mm
120
-
-
Providing and erecting XLPE (IS:7098) - BB ISI armoured cable multistrand aluminium conductor for 1.1 KV . To be laid on wall with necessary clamps or in existing trench / pipe of following size of cables.(i) 3.5 Core, 300 sq.mm. (150 sq. mm 0.5 core)
3000
-
-
Providing and erecting XLPE (IS:7098) - BB ISI armoured cable multistrand aluminium conductor for 1.1 KV . To be laid on wall with necessary clamps or in existing trench / pipe of following size of cables.(H) 3.5 Core, 240 sq.mm.(120 sq. mm 0.5 core)
100
-
-
Providing and erecting XLPE (IS:7098) - BB ISI armoured cable multistrand aluminium conductor for 1.1 KV . To be laid on wall with necessary clamps or in existing trench / pipe of following size of cables.3.5 Core, 185 sq.mm.(95 sq. mm 0.5 core)
225
-
-
Providing and erecting XLPE (IS:7098) - BB ISI armoured cable multistrand aluminium conductor for 1.1 KV . To be laid on wall with necessary clamps or in existing trench / pipe of following size of cables.3.5 Core, 120 sq.mm. (70 sq. mm 0.5 core)
200
-
-
Providing and erecting XLPE (IS:7098) - BB ISI armoured cable multistrand aluminium conductor for 1.1 KV . To be laid on wall with necessary clamps or in existing trench / pipe of following size of cables.3.5 Core, 95 sq.mm.(50 sq. mm 0.5 core)
500
-
-
Providing & fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete with outgoing tails insulating tape etc. for following size of cables.(I) 3.5 Core, 300 sq.mm.
20
-
-
Providing & fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete with outgoing tails insulating tape etc. for following size of cables.(H) 3½ X 240 sq. mm
2
-
-
Providing & fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete with outgoing tails insulating tape etc. for following size of cables.(G) 3.5 Core, 185 sq.mm.
4
-
-
Providing & fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete with outgoing tails insulating tape etc. for following size of cables.(E ) 3.5 Core, 120 sq.mm
2
-
-
Providing & fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete with outgoing tails insulating tape etc. for following size of cables.(D) 3.5 Core, 95 sq.mm.
2
-
-
Solder less crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly climped with high pressure tool & connected to switchgear terminals with brass / cadmium plated nut bolts in an approved manner.(K) 300 sq.mm
16
-
-
Solder less crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly climped with high pressure tool & connected to switchgear terminals with brass / cadmium plated nut bolts in an approved manner.(J) 225 sq. mm
4
-
-
Solder less crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly climped with high pressure tool & connected to switchgear terminals with brass / cadmium plated nut bolts in an approved manner.(I) 185 sq. mm
4
-
-
Solder less crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly climped with high pressure tool & connected to switchgear terminals with brass / cadmium plated nut bolts in an approved manner.(G) 120 sq. mm
2
-
-
Solder less crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly climped with high pressure tool & connected to switchgear terminals with brass / cadmium plated nut bolts in an approved manner.(F) 95 sq. mm
2
-
-
Providing & fixing approved make Perforated C type Cable tray, made from sheet steel. The cable tray should be single or double bended as per required and as per IS 2062 / 1079 and shall be coated with hot dip galvanizing as per IS 2629/4759 with max 17.5% perforation with coupler plate / fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support included) as per specification and as per instruction of Engineer In charge. 300 mm X 50 mm X 2.0 mm thick
250
-
-
Providing & fixing approved make Perforated C type Cable tray, made from sheet steel. The cable tray should be single or double bended as per required and as per IS 2062 / 1079 and shall be coated with hot dip galvanizing as per IS 2629/4759 with max 17.5% perforation with coupler plate / fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support included) as per specification and as per instruction of Engineer In charge.450 mm X 50 mm X 2.0 mm thick
50
-
-
Providing & fixing approved make Perforated C type Cable tray, made from sheet steel. The cable tray should be single or double bended as per required and as per IS 2062 / 1079 and shall be coated with hot dip galvanizing as per IS 2629/4759 with max 17.5% perforation with coupler plate / fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support included) as per specification and as per instruction of Engineer In charge.600 mm X 50 mm X 2.0 mm thick
50
-
-
Providing & laying RCC Hume pipe for cables to be laid at 90 cm below ground across the road crossing on or floor with necessary material in an approved manner and making the ground as per original.(F) 100 mm dia.
50
-
-
Providing & laying RCC Hume pipe for cables to be laid at 90 cm below ground across the road crossing on or floor with necessary material in an approved manner and making the ground as per original.(D) 250 mm dia.
20
-
-
Providing & laying approved make ISI marked HDPE 6kg/cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected at road crossing on or floor as directed for laying of cable. The pipes as following size of dia & weight per 6mtr.63 mm inner dia For Fiber & Power cables
1000
-
-
Providing & laying approved make ISI marked HDPE 6kg/cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected at road crossing on or floor as directed for laying of cable. The pipes as following size of dia & weight per 6mtr.110 mm inner dia For Fiber & Power cables
2500
-
-
Providing pair of Rubber hand gloves suitable for working on 11 KV/22 KV supply.
2
-
-
Providing & fixing printed instruction chart both in English & Gujarati and duly framed with front glasses for treatment of person suffering from Electric shock with minimum 50"diagonally size.
2
-
-
Providing & erecting metallic vitrified danger notice board as per language suggested by Engineer Incharge for HIGH VOLTAGE installation to be erected as per IS-2551.
2
-
-
Providing & erecting metallic vitrified danger notice board as per language suggested by Engineer Incharge for MEDIUM VOLTAGE installation to be erected as per IS-2551.
2
-
-
Supplying & erecting ABC power type Ceasefire type fire extinguisher as per IS 13849 or 1 Kg capacity with necessary clamp for erection on wall.
4
-
-
Supplying & erecting Carbon dioxide(CO2) fire extinguisher user of 4.5 kg capacity with necessary clamps made from 50 x 6 mm MS flat with nut & bolts grouted in wall complete.
4
-
-
Supplying & erecting floor mounting stand for keeing four nos. of Fire buckets comprising 1500 mm in length, 900 mm height frame made out of 30 mm x 30 mm x 4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of approved enamelled silver paint.
1
-
-
Supplying Fire bucket round bottom of 9 litre capacity made out of 24 gauge GI sheet with extra handle at bottom duly painted white inside and Red outside with Fire mark, filled with dry sand and kept on existing stand provided or hung on wall hook.
4
-
-
Supplying stand First aid box with Anti septic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (band -aid) adhesive tape for medicinal user, scissors, antiseptic solution (Savlon or similar) etc. (all above contents shall be of standard make)
1
-
-
Supplying Rubber matting of following thicknes as per IS : 15652 / IEC -61111(b) 4 mm
2
-
-
Supplying Rubber matting of following thicknes as per IS : 15652 / IEC -61111(c ) 12 mm
2
-
-
Supply, installation, testing and commissioning of 10LB. Novec-1230 DLP Assembly with automatic valve mounted on DOT/PESO approved cylinder, push in connector for tube, Mounting bracket etc.
2
-
-
Supply, installation, testing and commissioning of 5LB. Novec-1230 DLP Assembly with automatic valve mounted on DOT/PESO approved cylinder, push in connector for tube, Mounting bracket etc.
2
-
-
Supplying, installation, testing and commissioning of 2.5LB. Novec-1230 DLP Assembly with automatic valve mounted on DOT/PESO approved cylinder, push in connector for tube, Mounting bracket etc.
4
-
-
Supply, installation, testing and commissioning of UL listed Linear Pneumatic Heat Detection Tube ( operating temp at 120 Degree Centigrade, Colour-Red) For Automatic Fire Detection & Suppression.
300
-
-
Supply, installation, testing and commissioning of tee connection.
8
-
-
Supply, installation, testing and commissioning of elbow connection.
8
-
-
Supply, installation, testing and commissioning of end of line adapter with Pressure Gauge For charging & monitoring.
6
-
-
Supply, installation, testing and commissioning of Low pressure switch for monitoring system activation.
8
-
-
Supply, installation, testing and commissioning of Master control Unit with LED Flasher, Electronic Hooter, LED Indicator with provision for Integration with Fire Alarm Control Panel complete as required.
8
-
-
Supplying & erecting funnel type earthing having earth plate of following size burried in specifically prepared earth pit 3 mtr, below ground with 40 kg charcoal and salt with alternate layers of charcoal & salt, 20 mm dia GI pipe with funnel with a wire mesh for watering & bricks masanory block CI cover complete as per para 7.3 of IS 3043 with necessary length of double Galvanized Iron / copper earth wire no. 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I pipe 2.5 mtr long complete connected to the nearest switch gear with end socket as per direction & duly tested by earth tester confirming to IS (As per drawing) with following Specification.(B) with 45 x 45 x 0.35 cms. G.I. earth plate
12
-
-
Supplying & erecting funnel type earthing having earth plate of following size burried in specifically prepared earth pit 3 mtr, below ground with 40 kg charcoal and salt with alternate layers of charcoal & salt, 20 mm dia GI pipe with funnel with a wire mesh for watering & bricks masanory block CI cover complete as per para 7.3 of IS 3043 with necessary length of double Galvanized Iron / copper earth wire no. 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I pipe 2.5 mtr long complete connected to the nearest switch gear with end socket as per direction & duly tested by earth tester confirming to IS (As per drawing) with following Specification.(c ) with 60 x 60 x 0.315 cms. Copper earth plate
12
-
-
Providing and erecting required size HOT deep galvanized iron strip for earthing of H.T, OCB/ACB/Transformer LT panel board, motors etc. using proper clamp.
400
-
-
Providing and erecting required size Copper strip for earthing of H.T, OCB/ACB/Transformer LT panel board, motors etc. using copper clamp.
450
-
-
Supplying & erecting approved make Octagonal pole made from HR Sheet steel. The pole should be made as per IS and shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with integral junction box consist of terminal plate of min 6 mm Hylam sheet, standard profile 35mm x 7.5 mm Din-Rail for MCB mounting, stud type terminal and arrangement for cable termination to be erected on foundation as per details given by manufacturer considering site requirement.(D) 6 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm base plate, 4-M20 Bolts and 600mm long J-Bolt.
21
-
-
Supplying & erecting approved make Octagonal pole made from HR Sheet steel. The pole should be made as per IS and shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with integral junction box consist of terminal plate of min 6 mm Hylam sheet, standard profile 35mm x 7.5 mm Din-Rail for MCB mounting, stud type terminal and arrangement for cable termination to be erected on foundation as per details given by manufacturer considering site requirement.(G) 8 Mtr. Long 70 mm Top X 155 mm bottom dia, 3 mm thickness with 260mmX260mmX16mm base plate, 4-M20 Bolts and 600mm long J-Bolt.
6
-
-
Supplying & erecting approved make Octagonal pole made from HR Sheet steel. The pole should be made as per IS and shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with integral junction box consist of terminal plate of min 6 mm Hylam sheet, standard profile 35mm x 7.5 mm Din-Rail for MCB mounting, stud type terminal and arrangement for cable termination to be erected on foundation as per details given by manufacturer considering site requirement.(H) 9 Mtr. Long 70 mm Top X 155 mm bottom dia, 3 mm thickness with 260mmX260mmX16mm base plate, 4-M24 Bolts and 750mm long J-Bolt.
34
-
-
Supplying & erecting Galvanized M.S. pipe post "B" class 88.9 mm O.D. 4 mtr long duly painted with two coats of aluminium paint complete with metallic base plate of 300mm X 300 mm x 4 mm thick for using as a compund light pole with approx. weight 32 Kg.
56
-
-
Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the pole of size 45 X 45 X 100 cm, deep in below ground level with plinth of 45 cm X 45 cm ( or 45 cm dia X 45 cm ) high upper ground level with necessary curing and finishing in approved manner. ( for 4 & 6 mtr pole)
117
-
-
Supplying & erecting approved make SMC press moulded composite FRP loop in, loop out approx 2 mm thick box complete with backelite connector strip 5 way (3P+N+E) DIN rail for mounting mob & hanged doors as per requirement having locking arrangement with mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamp & earth built of following size of box. including 6A SP MCB 10 KA rating. (g) 250mm X 220mm 135mm (deep)
117
-
-
Supplying & erecting LED Street light / Flood light fittings with high power white LEDs wattage of 1 watt and above assembled on single MCPCB efficiency more than 130 lm/w and corrosion free high pressure die cast aluminium housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics / lenses with company mark / name engraved or embossed 120 to 300 V power factor more than 0.95, THD 10% CCT 3000 K to 5700 K, uniformity ratio 0.45, luminiare efficiency 100 lumens/watt, LED driver efficacy 85%. CREE/OSRAM/PHILIPS Lumileds/ NICHIA /SEOUL/ Bridgelux (USA) make LED used for luminiare. (fittings required LM-79 & LM-80 certificates) Note: Below description have shown ranges of wattge, capacity of LED fittings. the Engineer Incharge may select any wattage capacity between the ranges shown.)Post Top Lantern LED fitting comprises of Copper dust finish cast aluminium spigot and spun aluminium canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting driver and accessories wired upto terminal block.IP 65 (Including Gate Light) (b) 32-40 WCat - II
66
-
-
Flood Light (IP-65) surge-4 KV, light must have 440 VAC line supply protection. It should withstand 48 hours for 440 VAC line supply(E ) above 120 to 240 WattsCat-III
32
-
-
Street Light (IP-65), surge protection-4 KV integral and 10 KV non Integral, light must have 440 V AC line supply protection. It should withstand 48 hours for 440 v AC line supply.(F) Above 60 watts to 90 WattsCat -II
55
-
-
Providing and erecting XLPE (IS:7098) - BB ISI armoured cable multistrand aluminium conductor for 1.1 KV . to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (d) 4 core 16 sq. mm
2500
-
-
Providing & fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with outgoing tails insulating tape etc. for following size of cables. (d) 2 to 4 core 16 sq. mm
160
-
-
Solder less crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly climped with high pressure tool & connected to switchgear terminals with brass / cadmium plated nut bolts in an approved manner. (c ) 16/25 sq. mm
160
-
-
Providing & laying approved make ISI marked HDPE 6kg/cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected at road crossing on or floor as directed for laying of cable. The pipes as following size of dia & weight per 6mtr. 63 mm dia (OD-63 mm & ID-51 mm nominal) For Fiber & Power cables
3500
-
-
Providing & laying RCC Hume pipe for cables to be laid at 90 cm below ground across the road crossing on or floor with necessary material in an approved manner and making the ground as per original. 150 mm dia
20
-
-
Providing and erecting Hot deep Galvanized Iron strip wire 8 to 16 SWG.
3800
-
-
Supply and fixing of floor mounting, totally enclosed, Double Door type compartmentalized, cubical, dust, vermin proof and Outdoor type ROAD LIGHTING PILLAR fabricated out of 2mm thick cold rolled carbon anealed CRCA, sheet steel, intermnally strengthened with angle iron frame work with following incoming and outgoing feeders (fabricatedout of 2mm CRCA sheet steel) including supplying and mounting including making connectins / interconnections with lugs / glands crimping tools, testing and commissioning of following items inside the panel/pillar. The pillar shall be suitable for automatic operation of external lighting.Incoming100 A TP MCCB (25KA) -1 No.Time Switch with daily dial suitable for operation on 230V single phase 50Hz AC supply -2No.Auto Manual Selector Switch - 1 No.Bus BarsTPN Al bus bar of 200A ratingOutgoings 40A TP Power Contactor - 1 No. (AC-3 type)40A FP MCB - 6 No.Indication lamps RYB (LED Type) - 3 No.
1
-
-
Supplying and erecting, commissioning and testing Diesel Generating set confirming to IS : 4722:1968 & BS:5514 having continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water cooled diesel engine with multi-cylinders developing suitable BHP not less than following capacity at 1500 RPM with 10% overload for one hour in 24 hours with standard accessories like fly wheel, lubricating oil cooler, " A" class governor, heavy duty fuel wheel and lubricating oil filter, oil bath air filter, lubricating oil pressure gauge, end exhaust manifold, standard set of tools with adjustable spanners, screw drivers, cylinder head to cover, joint cylinder head to exhaust, element lube oil filter, 12/24 volt electric starting equipment complete with standard heavy duty battery, dynamo, cut - outs ammeter, necessary wiring, pressure gauge, starter etc. and heavy duty Residential type exhaust silencer and vertical hot air duct both logged with asbestos rope, save oil trays, exhaust piping of required length, standard wall/floor mounted fuel with level indicator and piping and drip proof alternator, self excited, self regulated, screen protected with excitation system, capable of delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, confirming to IS:4722-1968 with voltage regulation +/- 5% of rated voltage from no load to full load. Both the engine and alternator fitted on a common fabricated steel base plate with antivibration mounting engine and alternator both connected to each other by flexible flange coupling and with floor/wall mounted control panel box comprising of voltmeter, ammeter, selector switches, ACB/MCCB/MCB of adequate capacity indicator lamps duly wired with HRC fuses.The Alternator and Control Panel shall be connected with provided suitable capacity armoured cable and complete with Acoustic Enclosure (Canopy) made out of 16 SWG CRCA sheet, sound absorbing material rockwool of 64 density & 100 mm thick confirming to IS : 8183 /PU foam of 40 density - at least 40 MM. The Resin bonded rockwool covered from inside the canopy by perforated sheet with 3/4 mm holes, sound level not more than 75 dB at a distance of 1 mtr, as per PVCT norms. Erection, commissioning and satisfactory testing as per requirement with first filling of fuel, oil etc. with guarrantee / warrantee of complete system for two years & with obtaining all necessary certificate from Electrical Inspector. The capacity and rating of DG set is as below.(U) Continuous rating of 500 KVA, BHP not less than 600 BHP.
1
-
-
Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V, 50 cycles, A.C. diesel generating set complete of scope as detailed below:
1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator contactor neutral contactor for mains and generator power socket for connections.
2) Control and metering module: Line voltage monitor, Generator voltage monitor Ammeter 3 items attempt start facility, Air circuit breakers / MCB / MCCB of suitable rating for Auto/Manual operation. Auto/manual switch. Emergency stop push buttons. Manual start push button frequency meter. Engine hour meter, two earthing studs. AMF Control Panel for 500 KVA, 3 Phase DG Set
1
-
-
Supply, Installation, Testing and Commissioning of ongrid Solar Photo voltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium /GI structure of suitable strength with following components complete as required:-a) Solar Photo voltaic Module of capacity 330Wp or above, manufactured in India, conforming to IS14286/IEC61215, IS/IEC61730-Part-1, IS/IEC61730-Part-2. Solar Photo voltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants /systems must be warranted for their output peak watt capacity, which should not be less than 90% attheend of 10 years and 80% attheend of 25 years. b) Power Conditioning Unit (PCU) of 350-800VDC Input voltage range and 400 VAC, three phase, 4 wire, 50Hz+/-2.5Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel / conduit lugs and other accessories etc. as required.
260
-
-
Total Electrical Work
-
-
-
Sub Head XVII : Fire Fighting System
-
-
-
Supply, installation, testing & commissioning of electric driven main fire pump suitable for automatic operation and consisting of following: complete in all respect as required.Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered with anti vibration pads.2280 lpm at 70 m Head
1
-
-
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520..Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulatedwith 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered with anti vibration pads.2280 lpm at 70 m Head
1
-
-
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325.M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered with anti vibration pads.180 lpm at 70 m Head
1
-
-
Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
1
-
-
Supplying and making end termination with brass compression gland & Al.lugs for following sizes of PVC insulated, PVC sheathed/XLPE Al.conductor cables of 1.1 KV grade as required3.5x95 sq.mm
2
-
-
Supplying and making end termination with brass compression gland & Al.lugs for following sizes of PVC insulated, PVC sheathed/XLPE Al.conductor cables of 1.1 KV grade as required3 core 50.sqmm
2
-
-
Supplying and making end termination with brass compression gland & Al.lugs for following sizes of PVC insulated, PVC sheathed/XLPE Al.conductor cables of 1.1 KV grade as required3 core 16 sq.mm
2
-
-
Earthing with GI Earth plate 600 mm x 600 mm x 6 mm th.including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe with charcoal or coke and salt complete as required.
2
-
-
Providing & fixing 25 mm x 5 mm G.I. Strip in 40 mm dia GI pipe from earth electrode including connections with GI nut, bolt, spring, washer excavation and re-filling etc. as required.
10
-
-
Providing & fixing 25 mm x 5 mm G.I. Strip in on surface or in recess for connections etc as required.
50
-
-
Providing and fixing 6 SWG dia G.I wire on surface or in recess for loop earthing along with existing conduit/cable as required.
20
-
-
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. 300 mm (W) x 50 mm (D) x 1.6 mm (T)
50
-
-
Supplying, fixing, testing and commissioning of following size Y-Strainer of ductile CI body flanged ends with stainless steel strainer as specified. 150 mm dia
1
-
-
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.25 mm dia
2586
-
-
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.32 mm dia
851
-
-
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.40mm dia
573
-
-
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.50mm dia
478
-
-
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.65mm dia
124
-
-
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.80mm dia
229
-
-
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.100mm dia
626
-
-
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.150mm dia
700
-
-
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required150 mm dia
218
-
-
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required80 mm dia
50
-
-
Supplying and fixing single headed internal hydrant valve with instantanous Gun metal couplings of 63mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank Gunmetal cap and chain as required Single headed Gunmetal
66
-
-
Supplying, fixing, testing and commissioning of following size butterfly valve (manual) with CI body SS disc nitrile sheet & O-ring & PN 16 pressure rating as specified.150 mm dia
5
-
-
Supplying, fixing, testing and commissioning of following size butterfly valve (manual) with CI body SS disc nitrile sheet & O-ring & PN 16 pressure rating as specified.100 mm dia
52
-
-
Supplying, fixing, testing and commissioning of following size butterfly valve (manual) with CI body SS disc nitrile sheet & O-ring & PN 16 pressure rating as specified.80 mm dia
9
-
-
Supplying, fixing, testing and commissioning of following size butterfly valve (manual) with CI body SS disc nitrile sheet & O-ring & PN 16 pressure rating as specified.50 mm dia
2
-
-
Supplying, fixing, testing and commissioning of following size double flanged sluice valveof rating PN 16 with non rising spindle bronze/GM seat ISI marked complete withnut bolts washer gaskets and conf.to IS780 as required. 150 mm dia
1
-
-
Supplying and fixing orifice plate made of 6 mm thick stainless steel with orifice of required size in between flange & landing value of external and internal hydrant to reduce pressure to working pressure of 3.5 kg/cm2 complete as per specifications as required.
66
-
-
Supplying, fixing, testing and commissioning of following size non return valve with dual plate of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified.150 mm dia
3
-
-
Supplying, fixing, testing and commissioning of following size non return valve with dual plate of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified.100 mm dia
54
-
-
Supplying, fixing, testing and commissioning of following size non return valve with dual plate of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified.80 mm dia
4
-
-
Supplying and fixing 63mm dia, 15mtr. Long RRL hose pipe with 63mm dia Male and Female Gun metal couplings duly binded with GI wire, rivets etc. conforming to IS 636 (type-A) as required. Gun Metal
84
-
-
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 1258520 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipments on wall.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30 M
66
-
-
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :Gun Metal
66
-
-
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : - 4 way-100 mm dia M.S. Pipe
1
-
-
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : - 2 way-100 mm dia M.S. Pipe
2
-
-
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel pain of approved shade as required.
4
-
-
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm andhydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :100 mm dia
3
-
-
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
1
-
-
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. 100mm dia
1
-
-
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :- Pendent Sprinkler
536
-
-
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : - Horizontal side wall sprinkler
22
-
-
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. 700mm
19
-
-
Supplying, installation, testing & commissioning of deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alarm, drip and drain valve with water motor gong complete as required. 150 mm
1
-
-
Providing, installation, testing & commissioning of electric release trim assembly for deluge valve with tro way solenoid valve,weatherproof operation on 24 volts DC supply complete as required
1
-
-
Laying of one number PVC insulated and PVC sheathed / XLPEpower cable of 1.1 kV grade of following size direct in groundincluding excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 35 sq. mm and upto 95 sq. mm
15
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following sizeon wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
10
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following sizeon wall surface as requiredAbove 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
95
-
-
Supplying of XLPE insulated, PVC sheathed alluminium conductor 1.1 KV grade armoured U.G Cable as required 3.5x95 sq.mm
100
-
-
Supplying of XLPE/PVC insulated stranded copper conductor 1.1 KV grade (un-armoured) of following size as required.3 core 50.mm
10
-
-
Supplying of XLPE/PVC insulated stranded copper conductor 1.1 KV grade (un-armoured) of following size as required.3 core 16 sq.mm
10
-
-
Supplying and fixing of hose cabinet of 750W x 600H x 250D mm made of 18 gauge M.S. sheet with 6mm thick glazed glass door including necessary locking arrangment suitable to accomodate external hydrant with butterfly valve, 2 nos. 15 mtr. long hose pipe, 1 no. branch pipe mounted on wall or raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect for external hydrant as required.
16
-
-
Providing & fixing angle iron (40 mmx 40mm x 5 mm) door frame and M.S. sheet 18 guage cum glass shutter of size 2.1 mtr. X 1.2mtr. (N.S) with 25mm x 25mm x 3mm angle frame all around & stiffened in between i/c hinges, handle, locking arrangement, painting with approved synthetic enamel paint i/c sign writing on glass at internal hydrant including providing & fixing M.S. sheet 2 mm thick on remaining portion above door to close opening i/c painting etc. as required.
62
-
-
Providing and fixing of ABC modular powder type fire extinguisher consisting of welded MS cylindrical body squeeze lever discharge valve fitted with pressoer indicating guage, internal discharge tube 30 cms long high pressor discharge hose, discharge nozzle, suspension (confirming to IS 13949 finished externally with red enamel paint and fix to wall with (complete with intrenal dishchage ) capicity 6kg ISI marked
62
-
-
Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylinderical body,squeeze lever discharge valve fitted with internal dischargetube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge.Capacity 4.5 kg. I.S.I. Marked.
62
-
-
Total
-
-
-
Sub Head XVIII : HVAC
-
-
-
Supply, Installation, Testing and Commissioning of AHRI Certified Air cooled Screw Water chillers complete with air cooled Copper Aluminium condensers, multiple Compressors, multi circuit Chiller, refrigerant R-134a, microprocessor based Control system, Electrical panel, mounting frame works, vibration isolators, integral refrigerant piping and wiring, all required accessories, automatic & safety controls, advanced microprocessor based control panel along with required hardware & software for integration with a 3rd party BMS (Open protocol), star delta starter, compressor shall be of the chiller supplier only i.e. outsourced compressor shall not be acceptable. The condenser shall be mandatory coated with goldfin or epoxy or equivalent coating. ASME Stamped evaporator first charge of refrigerant and oil, incommer switchgear with terminations box suitable for terminations of XLPE AL armoured cables, earthing terminations etc. all mounted on a steel frame, foundation bolts nuts and accessores complete duly finished as per manufacturer standard as required & as per technical specifications with the following charactreistices complete as required : 220 Tons, Actual Capacity (One working)
3
-
-
Supply, erection, testing and commissioning of end suction / Vertical Inline Split Coupled centrifugal primary chilled water pump set capable of delivering- 2000 LPM of water against 12 mtr head each comprising of the following and complete with TEFC squirrel cage induction motor, efficiency IE3 with class 'F" insulation. 1450 rpm synchronous speed, operating on 415+ 10% volts, 3 phase, 50 Hz A.C. supply. pump shall have CI body, SS/Bronze impeller, spacer coupling and coupling guard. The scope also shall include following.19mm thick polyviny nitrile rubber insulation duly cladded between aluminium sheets of 0.5mm thickness and properly clamped to pump.2 Nos. - 150 mm dia dial type pressure gaugesMounting frame with antivibration padsRCC/cement concrete foundation for the pump unit.
2
-
-
Supply, erection, testing and commissioning of variable speed Secondary Chilled Water end suction / Vertical in line Split Coupled centrifugal pumps Pumps - 3 Nos. (2 W + 1 SB) and 3 No. of pump mounted IP55 adjustable frequency drives with built in DC Choke for Variable speed Pumping with 1 nos Parallel pump controller from factory capable of delivering-2000 LPM of water against 18 mtr head each, complete with TEFC induction motor with class ‘F’ insulation to operate on 415+ 10% volts, 3 phase, 50 Hz A.C supply for each pump and DPT ( Sensors ) Supplied by pump Manufacturers or Sensorless Controls in Pump. The shall also include the followingElectrical by pass stater for pumps19mm thick polyviny nitrile rubber insulation duly cladded between aluminium sheets of 0.5mm thickness and properly clamped to pump.2 Nos. - 150 mm dia dial type pressure gauges per pumpMounting frame with antivibration padsRCC/cement concrete foundation for the pump unit.
1
-
-
Supplying, installation, testing and commissioning of fan coil units having following capacities, ceiling mounted complete with copper tubes, 3 row deep chilled water cooling coils having aluminium fins and auxiliaries including ball valve set ( one with strainer), insulation of drain pan, drain connections, blower, TEFC slow speed (3 speeds) squirrel cage induction motor suitable for operation on 230 volts, single phase, 50 Hz, A.C. supply, controls for fan coil units comprising solenoid valve, three speed selector switch, room thermostat with ON/ OFF switch, electrical wiring etc complete as required.600cfm 1.5TR
10
-
-
Supplying, installation, testing and commissioning of fan coil units having following capacities, ceiling mounted complete with copper tubes, 3 row deep chilled water cooling coils having aluminium fins and auxiliaries including ball valve set ( one with strainer), insulation of drain pan, drain connections, blower, TEFC slow speed (3 speeds) squirrel cage induction motor suitable for operation on 230 volts, single phase, 50 Hz, A.C. supply, controls for fan coil units comprising solenoid valve, three speed selector switch, room thermostat with ON/ OFF switch, electrical wiring etc complete as required.800cfm 2TR
3
-
-
Supplying, installation, testing and commissioning of fan coil units having following capacities, ceiling mounted complete with copper tubes, 3 row deep chilled water cooling coils having aluminium fins and auxiliaries including ball valve set ( one with strainer), insulation of drain pan, drain connections, blower, TEFC slow speed (3 speeds) squirrel cage induction motor suitable for operation on 230 volts, single phase, 50 Hz, A.C. supply, controls for fan coil units comprising solenoid valve, three speed selector switch, room thermostat with ON/ OFF switch, electrical wiring etc complete as required.1000cfm 2.5TR
3
-
-
Supplying, installation, testing and commissioning of fan coil units having following capacities, ceiling mounted complete with copper tubes, 3 row deep chilled water cooling coils having aluminium fins and auxiliaries including ball valve set ( one with strainer), insulation of drain pan, drain connections, blower, TEFC slow speed (3 speeds) squirrel cage induction motor suitable for operation on 230 volts, single phase, 50 Hz, A.C. supply, controls for fan coil units comprising solenoid valve, three speed selector switch, room thermostat with ON/ OFF switch, electrical wiring etc complete as required.1200cfm 3TR
8
-
-
Supplying, installing, testing and commissioning of Ceiling mounted chilled water cassette units complete with pre-filter, low noise fan and motor with ON/OFF and 3 speed control and suitable for 1 phase, 230 + 6%V, 50 Hz electric supply wiring in conduit upto thermostat box, the unit shall be complete with electrical terminal strip chilled water copper tube and aluminium finned cooling coil, with stainless steel duly insulated main and auxiliary drain pan, Cordless Remote Controller, powder coated galvanized steel housing, drain pump, factory made Pre-fit set of ball valve with and without strainer, Thermostat & modulating valve, copper piping & connections, Electrical & cabling for proper connection from the 15 Amps outlet to connector box. The noise level at low speed shall be in the range of 38 to 42db & at high speed upto 45db. Noise levels are at a distance of 2M from the unit. The necessary supporting mechanism with GI suspension rods, GI channel, dash fastners & vibration isolators to be included. The Cassette capacities shall be :1200CFM 3.2TR
12
-
-
Supplying, installing, testing and commissioning of Ceiling mounted chilled water cassette units complete with pre-filter, low noise fan and motor with ON/OFF and 3 speed control and suitable for 1 phase, 230 + 6%V, 50 Hz electric supply wiring in conduit upto thermostat box, the unit shall be complete with electrical terminal strip chilled water copper tube and aluminium finned cooling coil, with stainless steel duly insulated main and auxiliary drain pan, Cordless Remote Controller, powder coated galvanized steel housing, drain pump, factory made Pre-fit set of ball valve with and without strainer, Thermostat & modulating valve, copper piping & connections, Electrical & cabling for proper connection from the 15 Amps outlet to connector box. The noise level at low speed shall be in the range of 38 to 42db & at high speed upto 45db. Noise levels are at a distance of 2M from the unit. The necessary supporting mechanism with GI suspension rods, GI channel, dash fastners & vibration isolators to be included. The Cassette capacities shall be :1440CFM 3.6TR
32
-
-
Supplying, installing, testing and commissioning of floor mounted/ceiling suspended chilled water, double skin type air handling units made of min 25mm thick panels consisting of Pre coated casing of thickness 0.8 mm outside layer and 0.6 mm GI inside layer with polyurethene foam (PUF) Insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as detailed below, minimum 2 bend GSS/PVC eliminators, Six row deep cooling coil section with aluminium finned copper tubes (tube thickness not less than 0.5mm) cooling coil , filter sections with 50mm thick metal viscous/washable synthetic type air pre-filters & fine, belt drive package with TEFC drive motor (IE3 efficiency) suitable for 415+10% volts, 50 Hz , 3 phase, A.C supply and scope includes AHU mounted VFD drive complete with incoming electrical isolator in enclosure , drain connections, stainless steel drain pan, thermometers and pressure gauges at the inlet and outlet of coil, necessary vibration isolation arrangement etc. complete as per specifications and of following capacities. Air Qty (CFM / TR) St. pr.(mm of WG) Filteration2000 CFM
1
-
-
Supplying, installing, testing and commissioning of floor mounted/ceiling suspended chilled water, double skin type air handling units made of min 25mm thick panels consisting of Pre coated casing of thickness 0.8 mm outside layer and 0.6 mm GI inside layer with polyurethene foam (PUF) Insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as detailed below, minimum 2 bend GSS/PVC eliminators, Six row deep cooling coil section with aluminium finned copper tubes (tube thickness not less than 0.5mm) cooling coil , filter sections with 50mm thick metal viscous/washable synthetic type air pre-filters & fine, belt drive package with TEFC drive motor (IE3 efficiency) suitable for 415+10% volts, 50 Hz , 3 phase, A.C supply and scope includes AHU mounted VFD drive complete with incoming electrical isolator in enclosure , drain connections, stainless steel drain pan, thermometers and pressure gauges at the inlet and outlet of coil, necessary vibration isolation arrangement etc. complete as per specifications and of following capacities. Air Qty (CFM / TR) St. pr.(mm of WG) Filteration3000 CFM
14
-
-
Supplying, installing, testing and commissioning of floor mounted/ceiling suspended chilled water, double skin type air handling units made of min 25mm thick panels consisting of Pre coated casing of thickness 0.8 mm outside layer and 0.6 mm GI inside layer with polyurethene foam (PUF) Insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as detailed below, minimum 2 bend GSS/PVC eliminators, Six row deep cooling coil section with aluminium finned copper tubes (tube thickness not less than 0.5mm) cooling coil , filter sections with 50mm thick metal viscous/washable synthetic type air pre-filters & fine, belt drive package with TEFC drive motor (IE3 efficiency) suitable for 415+10% volts, 50 Hz , 3 phase, A.C supply and scope includes AHU mounted VFD drive complete with incoming electrical isolator in enclosure , drain connections, stainless steel drain pan, thermometers and pressure gauges at the inlet and outlet of coil, necessary vibration isolation arrangement etc. complete as per specifications and of following capacities. Air Qty (CFM / TR) St. pr.(mm of WG) Filteration3200 CFM
5
-
-
Supplying, installing, testing and commissioning of floor mounted/ceiling suspended chilled water, double skin type air handling units made of min 25mm thick panels consisting of Pre coated casing of thickness 0.8 mm outside layer and 0.6 mm GI inside layer with polyurethene foam (PUF) Insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as detailed below, minimum 2 bend GSS/PVC eliminators, Six row deep cooling coil section with aluminium finned copper tubes (tube thickness not less than 0.5mm) cooling coil , filter sections with 50mm thick metal viscous/washable synthetic type air pre-filters & fine, belt drive package with TEFC drive motor (IE3 efficiency) suitable for 415+10% volts, 50 Hz , 3 phase, A.C supply and scope includes AHU mounted VFD drive complete with incoming electrical isolator in enclosure , drain connections, stainless steel drain pan, thermometers and pressure gauges at the inlet and outlet of coil, necessary vibration isolation arrangement etc. complete as per specifications and of following capacities. Air Qty (CFM / TR) St. pr.(mm of WG) Filteration3600 CFM
4
-
-
Supplying, installing, testing and commissioning of floor mounted/ceiling suspended chilled water, double skin type air handling units made of min 25mm thick panels consisting of Pre coated casing of thickness 0.8 mm outside layer and 0.6 mm GI inside layer with polyurethene foam (PUF) Insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as detailed below, minimum 2 bend GSS/PVC eliminators, Six row deep cooling coil section with aluminium finned copper tubes (tube thickness not less than 0.5mm) cooling coil , filter sections with 50mm thick metal viscous/washable synthetic type air pre-filters & fine, belt drive package with TEFC drive motor (IE3 efficiency) suitable for 415+10% volts, 50 Hz , 3 phase, A.C supply and scope includes AHU mounted VFD drive complete with incoming electrical isolator in enclosure , drain connections, stainless steel drain pan, thermometers and pressure gauges at the inlet and outlet of coil, necessary vibration isolation arrangement etc. complete as per specifications and of following capacities. Air Qty (CFM / TR) St. pr.(mm of WG) Filteration2500 CFM
1
-
-
Supplying, installing, testing and commissioning of floor mounted/ceiling suspended chilled water, double skin type air handling units made of min 25mm thick panels consisting of Pre coated casing of thickness 0.8 mm outside layer and 0.6 mm GI inside layer with polyurethene foam (PUF) Insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as detailed below, minimum 2 bend GSS/PVC eliminators, Six row deep cooling coil section with aluminium finned copper tubes (tube thickness not less than 0.5mm) cooling coil , filter sections with 50mm thick metal viscous/washable synthetic type air pre-filters & fine, belt drive package with TEFC drive motor (IE3 efficiency) suitable for 415+10% volts, 50 Hz , 3 phase, A.C supply and scope includes AHU mounted VFD drive complete with incoming electrical isolator in enclosure , drain connections, stainless steel drain pan, thermometers and pressure gauges at the inlet and outlet of coil, necessary vibration isolation arrangement etc. complete as per specifications and of following capacities. Air Qty (CFM / TR) St. pr.(mm of WG) Filteration5500 CFM
1
-
-
Supplying, installing, testing and commissioning of floor mounted/ceiling suspended chilled water, double skin type air handling units made of min 25mm thick panels consisting of Pre coated casing of thickness 0.8 mm outside layer and 0.6 mm GI inside layer with polyurethene foam (PUF) Insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as detailed below, minimum 2 bend GSS/PVC eliminators, Six row deep cooling coil section with aluminium finned copper tubes (tube thickness not less than 0.5mm) cooling coil , filter sections with 50mm thick metal viscous/washable synthetic type air pre-filters & fine, belt drive package with TEFC drive motor (IE3 efficiency) suitable for 415+10% volts, 50 Hz , 3 phase, A.C supply and scope includes AHU mounted VFD drive complete with incoming electrical isolator in enclosure , drain connections, stainless steel drain pan, thermometers and pressure gauges at the inlet and outlet of coil, necessary vibration isolation arrangement etc. complete as per specifications and of following capacities. Air Qty (CFM / TR) St. pr.(mm of WG) Filteration6000 CFM
1
-
-
Supplying, installation, testing and commissioning of following size electronic, self balancing, pressure independent dynamic balance valve with integrated 2 way modulating control valve in single body. The actuator shall be capable of accepting uto 10V DC & upto 20mA electrical signal and shall provide similar tranduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50mm valves & 7 Bar for 65mm & above. Valve should be have pressure rating of 25Bar minimum. The scope shall include thermostat and wiring for interconnection with 1.5 sq.mm copper conductor multicore armoured cable complete as required. 50 mm Ø
7
-
-
Supplying, installation, testing and commissioning of following size electronic, self balancing, pressure independent dynamic balance valve with integrated 2 way modulating control valve in single body. The actuator shall be capable of accepting uto 10V DC & upto 20mA electrical signal and shall provide similar tranduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50mm valves & 7 Bar for 65mm & above. Valve should be have pressure rating of 25Bar minimum. The scope shall include thermostat and wiring for interconnection with 1.5 sq.mm copper conductor multicore armoured cable complete as required. 32 mm Ø
20
-
-
Supply, Installation, Testing and commissioning of short casing, tube axial fans with adjustable pitched aluminium alloy impeller, TEFC squirrel cage induction motor (Class H insulation) suitable for 415V±10%, 50 Hz. 3 phase electric supply, direct drive arrangement, sheet metal casing, rubber isolator mounts and other accessories as specified and of following capacities. Fan Speed not exceeding 1450 rpm.The fan shall be complete with inlet / exhaust bird screen etc. as required.9000cfm / 30mm WG st. pr. (Basement exhaust)
4
-
-
Supply, Installation, Testing and commissioning of short casing, tube axial fans with adjustable pitched aluminium alloy impeller, TEFC squirrel cage induction motor (Class H insulation) suitable for 415V±10%, 50 Hz. 3 phase electric supply, direct drive arrangement, sheet metal casing, rubber isolator mounts and other accessories as specified and of following capacities. Fan Speed not exceeding 1450 rpm.The fan shall be complete with inlet / exhaust bird screen etc. as required.6000cfm / 30mm WG st. pr. (Basement FA)
4
-
-
Supply, Installation, Testing and commissioning of short casing, tube axial fans with adjustable pitched aluminium alloy impeller, TEFC squirrel cage induction motor (Class H insulation) suitable for 415V±10%, 50 Hz. 3 phase electric supply, direct drive arrangement, sheet metal casing, rubber isolator mounts and other accessories as specified and of following capacities. Fan Speed not exceeding 1450 rpm.The fan shall be complete with inlet / exhaust bird screen etc. as required.6000cfm / 20mm WG st. pr (Lift well pr)
2
-
-
Supply, Installation, Testing and commissioning of short casing, tube axial fans with adjustable pitched aluminium alloy impeller, TEFC squirrel cage induction motor (Class H insulation) suitable for 415V±10%, 50 Hz. 3 phase electric supply, direct drive arrangement, sheet metal casing, rubber isolator mounts and other accessories as specified and of following capacities. Fan Speed not exceeding 1450 rpm.The fan shall be complete with inlet / exhaust bird screen etc. as required.26000cfm / 30mm WG st. pr. (Basement Stair pr.)
3
-
-
Supply of Inline Fan of GI Casing Rectangular Type with light weight dynamic balanced GI Impeller, suitable forSingle Phase Motor (Without Speed Regulator, Bird Screen and Louver) for toilet exhaust .600cfm /15mm static
1
-
-
Supply of Inline Fan of GI Casing Rectangular Type with light weight dynamic balanced GI Impeller, suitable forSingle Phase Motor (Without Speed Regulator, Bird Screen and Louver) for toilet exhaust .300cfm /15mm static
5
-
-
Supply of Inline Fan of GI Casing Rectangular Type with light weight dynamic balanced GI Impeller, suitable forSingle Phase Motor (Without Speed Regulator, Bird Screen and Louver) for toilet exhaust .250cfm /15mm static
4
-
-
Supply of Inline Fan of GI Casing Rectangular Type with light weight dynamic balanced GI Impeller, suitable forSingle Phase Motor (Without Speed Regulator, Bird Screen and Louver) for toilet exhaust .150cfm /15mm static
12
-
-
Supply of Inline Fan of GI Casing Rectangular Type with light weight dynamic balanced GI Impeller, suitable forSingle Phase Motor (Without Speed Regulator, Bird Screen and Louver) for toilet exhaust .100cfm /15mm static
33
-
-
Supply of Inline Fan of GI Casing Rectangular Type with light weight dynamic balanced GI Impeller, suitable forSingle Phase Motor (Without Speed Regulator, Bird Screen and Louver) for toilet exhaust .60cfm /15mm static
7
-
-
Supplying, laying, fixing, testing and commissioning of following nominal sizes of chilled water plumbing inside the building / outside the building along the wall/ roof (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) pipe insulation shall be polyurethane foam with 36 kg/cu m minimum density, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/OF. The insulation shall completely fill the annular space between the service pipe and jacket and-shall be bonded to both, the service pipe & jacket. The minimum thickness of insulation shall be 30mm for pipes diameter less than 150mm & shall be 50mm for pipe diameter 150 to 300mm. The pipe cladding shall be with 24 gauge Aluminium sheet. Lock seam spiral Jackets for metallic jackets must be made on a spiral duct forming machine. The lock seam jackets should have zero leakage at the seams. 250 mm Ø Piping Insulation 50mm thick
50
-
-
Supplying, laying, fixing, testing and commissioning of following nominal sizes of chilled water plumbing inside the building / outside the building along the wall/ roof (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) pipe insulation shall be polyurethane foam with 36 kg/cu m minimum density, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/OF. The insulation shall completely fill the annular space between the service pipe and jacket and-shall be bonded to both, the service pipe & jacket. The minimum thickness of insulation shall be 30mm for pipes diameter less than 150mm & shall be 50mm for pipe diameter 150 to 300mm. The pipe cladding shall be with 24 gauge Aluminium sheet. Lock seam spiral Jackets for metallic jackets must be made on a spiral duct forming machine. The lock seam jackets should have zero leakage at the seams.200 mm Ø Piping Insulation 50mm thick
50
-
-
Supplying, laying, fixing, testing and commissioning of following nominal sizes of chilled water plumbing inside the building / outside the building along the wall/ roof (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) pipe insulation shall be polyurethane foam with 36 kg/cu m minimum density, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/OF. The insulation shall completely fill the annular space between the service pipe and jacket and-shall be bonded to both, the service pipe & jacket. The minimum thickness of insulation shall be 30mm for pipes diameter less than 150mm & shall be 50mm for pipe diameter 150 to 300mm. The pipe cladding shall be with 24 gauge Aluminium sheet. Lock seam spiral Jackets for metallic jackets must be made on a spiral duct forming machine. The lock seam jackets should have zero leakage at the seams.150 mm Ø Piping Insulation 50mm thick
100
-
-
Supplying, laying, fixing, testing and commissioning of following nominal sizes of chilled water plumbing inside the building / outside the building along the wall/ roof (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) pipe insulation shall be polyurethane foam with 36 kg/cu m minimum density, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/OF. The insulation shall completely fill the annular space between the service pipe and jacket and-shall be bonded to both, the service pipe & jacket. The minimum thickness of insulation shall be 30mm for pipes diameter less than 150mm & shall be 50mm for pipe diameter 150 to 300mm. The pipe cladding shall be with 24 gauge Aluminium sheet. Lock seam spiral Jackets for metallic jackets must be made on a spiral duct forming machine. The lock seam jackets should have zero leakage at the seams.125 mm Ø Piping Insulation 50mm thick
200
-
-
Supplying, laying, fixing, testing and commissioning of following nominal sizes of chilled water plumbing inside the building / outside the building along the wall/ roof (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) pipe insulation shall be polyurethane foam with 36 kg/cu m minimum density, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/OF. The insulation shall completely fill the annular space between the service pipe and jacket and-shall be bonded to both, the service pipe & jacket. The minimum thickness of insulation shall be 30mm for pipes diameter less than 150mm & shall be 50mm for pipe diameter 150 to 300mm. The pipe cladding shall be with 24 gauge Aluminium sheet. Lock seam spiral Jackets for metallic jackets must be made on a spiral duct forming machine. The lock seam jackets should have zero leakage at the seams.100 mm Ø Piping Insulation 50mm thick
100
-
-
Supplying, laying, fixing, testing and commissioning of following nominal sizes of chilled water plumbing inside the building / outside the building along the wall/ roof (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) pipe insulation shall be polyurethane foam with 36 kg/cu m minimum density, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/OF. The insulation shall completely fill the annular space between the service pipe and jacket and-shall be bonded to both, the service pipe & jacket. The minimum thickness of insulation shall be 30mm for pipes diameter less than 150mm & shall be 50mm for pipe diameter 150 to 300mm. The pipe cladding shall be with 24 gauge Aluminium sheet. Lock seam spiral Jackets for metallic jackets must be made on a spiral duct forming machine. The lock seam jackets should have zero leakage at the seams.80 mm Ø Piping Insulation 50mm thick
100
-
-
Supplying, laying, fixing, testing and commissioning of following nominal sizes of chilled water plumbing inside the building / outside the building along the wall/ roof (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) pipe insulation shall be polyurethane foam with 36 kg/cu m minimum density, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/OF. The insulation shall completely fill the annular space between the service pipe and jacket and-shall be bonded to both, the service pipe & jacket. The minimum thickness of insulation shall be 30mm for pipes diameter less than 150mm & shall be 50mm for pipe diameter 150 to 300mm. The pipe cladding shall be with 24 gauge Aluminium sheet. Lock seam spiral Jackets for metallic jackets must be made on a spiral duct forming machine. The lock seam jackets should have zero leakage at the seams.65 mm Ø Piping Insulation 50mm thick
100
-
-
Supplying, laying, fixing, testing and commissioning of following nominal sizes of chilled water plumbing inside the building / outside the building along the wall/ roof (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) pipe insulation shall be polyurethane foam with 36 kg/cu m minimum density, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/OF. The insulation shall completely fill the annular space between the service pipe and jacket and-shall be bonded to both, the service pipe & jacket. The minimum thickness of insulation shall be 30mm for pipes diameter less than 150mm & shall be 50mm for pipe diameter 150 to 300mm. The pipe cladding shall be with 24 gauge Aluminium sheet. Lock seam spiral Jackets for metallic jackets must be made on a spiral duct forming machine. The lock seam jackets should have zero leakage at the seams.50 mm Ø Piping Insulation 50mm thick
200
-
-
Supplying, laying, fixing, testing and commissioning of following nominal sizes of chilled water plumbing inside the building / outside the building along the wall/ roof (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) pipe insulation shall be polyurethane foam with 36 kg/cu m minimum density, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/OF. The insulation shall completely fill the annular space between the service pipe and jacket and-shall be bonded to both, the service pipe & jacket. The minimum thickness of insulation shall be 30mm for pipes diameter less than 150mm & shall be 50mm for pipe diameter 150 to 300mm. The pipe cladding shall be with 24 gauge Aluminium sheet. Lock seam spiral Jackets for metallic jackets must be made on a spiral duct forming machine. The lock seam jackets should have zero leakage at the seams.40 mm Ø Piping Insulation 50mm thick
200
-
-
Supplying, laying, fixing, testing and commissioning of following nominal sizes of chilled water plumbing inside the building / outside the building along the wall/ roof (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) pipe insulation shall be polyurethane foam with 36 kg/cu m minimum density, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/OF. The insulation shall completely fill the annular space between the service pipe and jacket and-shall be bonded to both, the service pipe & jacket. The minimum thickness of insulation shall be 30mm for pipes diameter less than 150mm & shall be 50mm for pipe diameter 150 to 300mm. The pipe cladding shall be with 24 gauge Aluminium sheet. Lock seam spiral Jackets for metallic jackets must be made on a spiral duct forming machine. The lock seam jackets should have zero leakage at the seams.32 mm Ø Piping Insulation 25mm thick
160
-
-
Supplying, laying, fixing, testing and commissioning of following nominal sizes of chilled water plumbing inside the building / outside the building along the wall/ roof (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) pipe insulation shall be polyurethane foam with 36 kg/cu m minimum density, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/OF. The insulation shall completely fill the annular space between the service pipe and jacket and-shall be bonded to both, the service pipe & jacket. The minimum thickness of insulation shall be 30mm for pipes diameter less than 150mm & shall be 50mm for pipe diameter 150 to 300mm. The pipe cladding shall be with 24 gauge Aluminium sheet. Lock seam spiral Jackets for metallic jackets must be made on a spiral duct forming machine. The lock seam jackets should have zero leakage at the seams.25 mm Ø Piping Insulation 25mm thick
50
-
-
Supplying, fixing, testing and commissioning of following valves, strainers, gauge in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.C.I. Butterfly valve.250 mm Ø
3
-
-
Supplying, fixing, testing and commissioning of following valves, strainers, gauge in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.C.I. Butterfly valve.200 mm Ø
12
-
-
Supplying, fixing, testing and commissioning of following valves, strainers, gauge in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.C.I. Butterfly valve.150 mm Ø
3
-
-
Supplying, fixing, testing and commissioning of following valves, strainers, gauge in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.C.I. Butterfly valve.125 mm Ø
12
-
-
Supplying, fixing, testing and commissioning of following valves, strainers, gauge in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.C.I. Butterfly valve.100 mm Ø
4
-
-
Supplying, fixing, testing and commissioning of following valves, strainers, gauge in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.C.I. Butterfly valve.80 mm Ø
6
-
-
Supplying, fixing, testing and commissioning of following valves, strainers, gauge in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.C.I. Butterfly valve.50 mm Ø
2
-
-
Supplying, fixing, testing and commissioning of following valves, strainers, gauge in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.C.I. Butterfly valve.40 mm Ø
1
-
-
Supplying, fixing, testing and commissioning of following valves, strainers, gauge in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.C.I. Butterfly valve.32 mm Ø
10
-
-
Supplying, fixing, testing and commissioning of following valves, strainers, gauge in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. Ball valve.25 mm Ø
4
-
-
Non-Return valve with duel plate of CI body SS plates vulcanized NBR seal Flanged end for chilled water circulation. 200 mm Ø
6
-
-
Balancing valve.200 mm Ø
3
-
-
Y- strainer of ductile CI Body flanged ends with stainless steel strainer 200 mm Ø
3
-
-
Y- strainer of ductile CI Body flanged ends with stainless steel strainer 150 mm Ø
3
-
-
Y- strainer of ductile CI Body flanged ends with stainless steel strainer 100 mm Ø
2
-
-
Y- strainer of ductile CI Body flanged ends with stainless steel strainer 80 mm Ø
3
-
-
Y- strainer of ductile CI Body flanged ends with stainless steel strainer50 mm Ø
2
-
-
Y- strainer of ductile CI Body flanged ends with stainless steel strainer 40 mm Ø
1
-
-
Y- strainer of ductile CI Body flanged ends with stainless steel strainer 32 mm Ø
5
-
-
Plug valves - 25mm diameter Plug valves in dirt legs
38
-
-
Flexible connections. - 200 mm Ø
12
-
-
SITC of water pressure gauge (100 mm Ø) bourdon type with brass ball valve of 3/8" Ø and SS tubing, socket. Range (0-50) / (0-100) as required.
54
-
-
SITC of Mercury in glass industrial thermometer in SS-304 casing with 0.5C least count, range 0-50 C. Brass oil filled thermowell of 1/2" size
54
-
-
Insulated Closed Expansion tank (at least 500lt capacity ) for chilled water application duly pressurized complete with piping connections, safety relief valve, drain valve, pressure gauge, automatic air purging arrangement, etc. complete as per specifications. The system shall be complete with self sufficient pressurization system complete with pressure switches and power distribution and control panel for 1+1 pressurization pumps (2CMH, 45mWC), IP55 Control Panel, Pressure Transmitter, interconnecting piping & wiring.. The tank shall be duly painted in approved colour. expansion tank & pressurization system should be rated for PN10.
1
-
-
Supply, installation , testing and commissioning of Air separator with pot type / Air & dirt separator straining capability for 150mm pipe line, automatic air purging arrangement etc. The design parameters for the air separator of efficiency 96-98 %. Suitable for PN10 rating, complete with super vent as required.
1
-
-
Supply, installation , testing and commissioning of 20mm Automatic Air Vent valve suitable to purge out the trapped air in the water pipe line complete as required.
45
-
-
Supplying, fixing, testing and commissioning of medium class G.I.condensate drain pipes, duly insulated, along with wall /Floor /roof etc of following size along with necessary clamps, fittings such as bends,tees etc. adequately supported as per specifications and as required. Insulation, on AHU drain piping, of rigid expanded Polystyrene pipe section of TF-quality pipe sections of thickness as given below The piping shall be wrapped with polyethyene sheet retained by GI wire netting and finally applied with two layers of sand cement plaster 12mm thick and painted 40 mm Ø 25mm thick
90
-
-
Supplying, fixing, testing and commissioning of medium class G.I.condensate drain pipes, duly insulated, along with wall /Floor /roof etc of following size along with necessary clamps, fittings such as bends,tees etc. adequately supported as per specifications and as required. Insulation, on AHU drain piping, of rigid expanded Polystyrene pipe section of TF-quality pipe sections of thickness as given below The piping shall be wrapped with polyethyene sheet retained by GI wire netting and finally applied with two layers of sand cement plaster 12mm thick and painted32 mm Ø 25mm thick
30
-
-
Supplying, fixing, testing and commissioning of medium class G.I.condensate drain pipes, duly insulated, along with wall /Floor /roof etc of following size along with necessary clamps, fittings such as bends,tees etc. adequately supported as per specifications and as required. Insulation, on AHU drain piping, of rigid expanded Polystyrene pipe section of TF-quality pipe sections of thickness as given below The piping shall be wrapped with polyethyene sheet retained by GI wire netting and finally applied with two layers of sand cement plaster 12mm thick and painted 25 mm Ø 25mm thick
60
-
-
Supply, Installation, Testing Balancing & Commissioning of G.S.S square/ rectangular factory fabricated ducting complete with gaskets, elbows, splitters, vanes, supports adjustable dampers, etc. as per drawings and as required for dehumidified air distribution of following thickness as per approved working drawings, specifications and requirement .18 gauge (1.25mm)
1
-
-
Supply, Installation, Testing Balancing & Commissioning of G.S.S square/ rectangular factory fabricated ducting complete with gaskets, elbows, splitters, vanes, supports adjustable dampers, etc. as per drawings and as required for dehumidified air distribution of following thickness as per approved working drawings, specifications and requirement .20 gauge (1mm)
1
-
-
Supply, Installation, Testing Balancing & Commissioning of G.S.S square/ rectangular factory fabricated ducting complete with gaskets, elbows, splitters, vanes, supports adjustable dampers, etc. as per drawings and as required for dehumidified air distribution of following thickness as per approved working drawings, specifications and requirement .22 gauge (0.8mm)
1680
-
-
Supply, Installation, Testing Balancing & Commissioning of G.S.S square/ rectangular factory fabricated ducting complete with gaskets, elbows, splitters, vanes, supports adjustable dampers, etc. as per drawings and as required for dehumidified air distribution of following thickness as per approved working drawings, specifications and requirement . 24 gauge (0.63mm)
2000
-
-
Supply and fixing of external thermal insulation on supply air ducts with 19mm thick chemically cross linked closed cell polythene (XLPE) fire retardant grade insulation of density not less than 30kg per cum in single layer with factory lamination of 30 micron aluminium foil or 25mm thick insulation as per CPWD specifications
1900
-
-
Same as above but 19mm thick
900
-
-
Supply and fixing of external thermal insulation on ducts running in ambient air with 19mm thick chemically cross linked closed cell polythene (XLPE) fire retardant grade insulation of density not less than 30kg per cum in single layer with factory lamination of 30 micron aluminium foil as per specifications. A coat of starbond or equivalent adhesive shall be applied on insulation & then the insulation shall be wrapped with glass cloth. Over glass cloth two more coats of star bond shall be applied. or 25mm thick insulation as per CPWD specifications
5
-
-
Suply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets,nut,bolts,screws linkages,flanges etc. as per specifications
6
-
-
Supplying, fixing, testing & commissioning of powder coated extruded aluminium section supply air grills with aluminium volume control dampers, as per specifications.
12
-
-
Supplying, & fixing, of powder coated extruded aluminium section Exhaust /return air grills with louvers but without volume control dampers, complete as per required.
16
-
-
Supplying, fixing, testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers.
12
-
-
Supplying, fixing, testing, commissioning of return air diffusers of powder coated aluminium.
5
-
-
Double layered Flexible canvass connection made of fibreglass weave having silver grey silicon rubber coating, Flexible connection shall be air tight & water proof and withstand high temperature application, non flammable and does not support combustion. Flexible connection shall be complete with flanges made out of 22G G.S.S sheet on both sides for connection to unit and duct complete with nuts, bolts etc.
7
-
-
Fresh air intake complete with powder coated extruded aluminium louver with Box type volume control damper in aluminium construction with 3-5% leakage at 2" pressure differential complete with multi-layer wire mesh filter for side wall below ceiling in dirty corridor.
5
-
-
Supplying, fixing Acoustic lining of supply air ducting complete with G.I frame, tissue paper, 28G perforated al. Sheet, 25mm thick 32kg/cu.m fibreglass insulation as per CPWD specifications.
30
-
-
upplying, fixing , testing and commissioning of fire dampers in supply air duct/ main branch and return air path as & where required of required sizes including control wiring. The damper shall be motorised and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored .the spring return action shall be built mechanism and not externally mounted . The damper shall also be closed in the event of a fire signals complete as required as per specifications .
10
-
-
Motorised Actuator
14
-
-
Supplying, installation, testing & commissioning of cubical type main MV panel board suitable for 3 phase, 415 V, 50 Hz and of 35 MVA rupturing capacity at 415 volts, fabricated from minimum 2mm thick CRCA Sheet powder coated through seven tank process facility for pickling and degreasing complete with following mountings, inter connections etc as required (Main Electric Panel) - Main Panel (AC) Incomer1600A, 4P EDO type ACB (50 KA) with Microprocessor based release unit for short circuit, over current and earth fault protection with adjustable setting and each shall have following accessories:0-500 Volts, digital Voltmeter and shall be protected by 2Amps MCBs.0-1000 Amps digital Ammeter Phase indicating lamps and shall be protected by 2Amps MCBs.Each incommer / outgoing multifunction meter with RS485 conectivety.Bus Bar:1500Amps TPN Aluminium busbars, colour coded with heat shrinkable insulation sleeves (after derating)Outgoing:All Outgoing Shall have 35 KA rating .Three(3) Nos. 600A TPN MCCB MDO (50 KA) ( PS 475Amps) (for Chillers). ( One spare)Three (3) Nos. 63A TP MCCB with star delta stater (for chilled water Water 15hp Pumps).
1
-
-
Supplying, installation, testing & commissioning of cubical type main MV panel board suitable for 3 phase, 415 V, 50 Hz and of 35 MVA rupturing capacity at 415 volts, fabricated from minimum 2mm thick CRCA Sheet powder coated through seven tank process facility for pickling and degreasing complete with following mountings, inter connections etc as required (Emergency Electric Panel)Incomer630A, 4P EDO type ACB (50 KA) with Microprocessor based release unit for short circuit, over current and earth fault protection with adjustable setting and each shall have following accessories:0-500 Volts, digital Voltmeter and shall be protected by 2Amps MCBs.0-800 Amps digital Ammeter Phase indicating lamps and shall be protected by 2Amps MCBs.Each incommer / outgoing multifunction meter with RS485 conectivety.Bus Bar:1000Amps TPN Aluminium busbars, colour coded with heat shrinkable insulation sleeves (after derating)Outgoing:All Outgoing Shall have 35 KA rating .Eight (8) Nos. 63A TP MCCB with DOL. (Basement exhaust & intake)
1
-
-
Supplying, installation, testing & commissioning of cubical type main MV panel board suitable for 3 phase, 415 V, 50 Hz and of 35 MVA rupturing capacity at 415 volts, fabricated from minimum 2mm thick CRCA Sheet powder coated through seven tank process facility for pickling and degreasing complete with following mountings, inter connections etc as required (Emergency Electric Panel)Incomer630A, 4P EDO type ACB (50 KA) with Microprocessor based release unit for short circuit, over current and earth fault protection with adjustable setting and each shall have following accessories:0-500 Volts, digital Voltmeter and shall be protected by 2Amps MCBs.0-800 Amps digital Ammeter Phase indicating lamps and shall be protected by 2Amps MCBs.Each incommer / outgoing multifunction meter with RS485 conectivety.Bus Bar:1000Amps TPN Aluminium busbars, colour coded with heat shrinkable insulation sleeves (after derating)Outgoing:All Outgoing Shall have 35 KA rating Six (6) Nos. 63A TP MCCB with DOL. (Lift well & Aud exhaust)
1
-
-
Supplying, installation, testing and commissioning of complete cable work using XLPE Insulated PVC sheathed steel tape/wire armoured underground aluminium conductor cables of following sizes for electric supply from main panel in AC Plant room, to various load including interconnections from stators to motors on suitable cable trays / supports as required including connections on both sides as per specifications and as required.3.5Cx95 Sq.mm ( Chiller)
90
-
-
Supplying, installation, testing and commissioning of complete cable work using XLPE Insulated PVC sheathed steel tape/wire armoured underground aluminium conductor cables of following sizes for electric supply from main panel in AC Plant room, to various load including interconnections from stators to motors on suitable cable trays / supports as required including connections on both sides as per specifications and as required.3.5c x10sqmm
240
-
-
Supplying, installation, testing and commissioning of complete cable work using XLPE Insulated PVC sheathed steel tape/wire armoured underground aluminium conductor cables of following sizes for electric supply from main panel in AC Plant room, to various load including interconnections from stators to motors on suitable cable trays / supports as required including connections on both sides as per specifications and as required.3c x 6sqmm (Pumps
60
-
-
Providing & fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc complete as required.
280
-
-
Providing & fixing 6 SWG dia GI wire on surface or in recess for loop earthing complete as required.
600
-
-
SITC Split AC indoor and out door Unit 1.5 TR Capacity including copper pipe of required length complete .
20
-
-
TOTAL
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements