Public Works Department Tender

Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead.

Dismantling of existing G.I pipe including disposal of unserviceable material and stacking of serviceable materials. a)Upto 20 mm nominal bore

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. I SCH-80(blue)/(white) a) 20mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer. External work I) SCH-80(blue)/(white) a) 20mm outer dia.

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : a)All works upto plinth level

Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs, watertanks. Cleaning the surface and filling cracks (if any), applying EPCO ACR wherever necessary, Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent

Supply of plumber.

Centering & shuttering including Strutting, Propping & removal of forms for : v)Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams exceeding 1m in depth

Providing & laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded granitic or basaltic stone aggrt. 40 mm. nominal size) excluding cost of centering, shuttering and finishing in: b)In retaining walls , return walls(any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level.

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.

Half brick masonry in cement mortar 1:3 (1 cement : 3 coarse sand) with bricks of class designation 75 kg /cm2. b)Upto floor V level.

12mm cement plaster 1:4 (1 cement : 4 fine sand)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead.

Extra for providing and mixing water proofing material proportion recommended by the manufacturers. b)12mm cement plaster 1: 4 (1 cement : 4 sand)

Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

For Barrier free toilet: Supply, installation and commissioning of complete set of wash basin of size 650 X 350 mm with one pair mounting brackets, European W.C. and cistern complete with all CP fittings, accessories and seat cover , one hinged rail 76cm, five no's of hand rails 60cm and one number of faucet for was basin etc. complete of approved make. a)One wash basin of size 650 X 350 mm with one pair mouting brackets. b)One European W.C. and cistern complete with all CP fittings, accessoris and seat cover. c)One hinged rail 76cm. d)Five no's of hand rails 60cm. e)One number of faucet for was basin.

Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.

Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete. b)Wall Ceramic Glazed Tiles : 300 x 450

Providing and and laying Ceramic glazed floor tiles 300 x 300 (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in colours such as white, ivory, grey, fume red, brown laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete

Supply & Installation of wall Paintings (Basic Rate. 7000/-)

Providing and fixing wall paneling with teak wood veneer on 12mm thick marine plywood with proper frame work at 0.6m c/c and teak wood beading of 6X4 cm. (Ply to have 6mm vertical grooves) including making of surface, adhesive charge and same has to approve by engineer in charge.

Supply & Installation of Plastic Plants in Pots ( Basic Rate 5000)

Providing Executive, Premium design chairs for Dir & Dy. Director with high back rest casters and arm.

Premium design chair with medium back rest, caster and arm.

Providing and fixing conference table of size 3.46x1.6 mtr and of height 0.8 with clear glass top with bevelled edge over laminate and marine plywood. Including necessary hardware and all external 1mm laminate finish and inside laminate complete as per Architectural drawings

Providing of Table type T-2 of size 1.5m X 0.75m X 0.75m table made of 19 mm thick Marine plywood with desk top, 3mm thick Glass top, all edges having teak wood beading. Including necessary hardware such as SS hinges, telescopic drawer channel . 3" dia wire manager and all external 1mm laminate finish and inside laminate complete as per Architectural drawings

Solid PVC door frame in prelaminated colour : Providing and fixing factory made polyvinyl chloride (PVC) Door Frame in Prelaminated colour of the size 50mm width 47mm height with a wall thickness of 5mm(±0.25) made out of extruded 5mm(±0.25) thick PVC Sheet of Density 600 Kg /Cbm Manufactured by an ISO-9000 certified Company having pattam width of 50mm and thickness of 10mm providing weather seal Non-woven self adhesive gasket throughout the frame. All three frame lengths reinforced with 19mmx19mm M.S.square tube of 19 gauge. mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15mmx15mm M.S. square tube. The door frame shall be fixed to the wall using 8/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge.

Providing and fixing 30mm thick factory made solid panel (PVC) door shutter consisting of frame made out of M.S.tubes of 19 guage thickness and size of 40mm x 20mm for stiles as well as top lock & bottom rail. M.S.Frame shall have a coat of metal primer of approved make and manufacture. M.S.Frame shall be covered with heat moulded prelam / Plain 'C' channel made from 5mm (±0.25) thick PVC Sheet of Density 600 Kg /Cbm Manufactured by an ISO-9000 certified Company of size 30 thickness 110mm width forming stiles in which 100 mm should be flat & 5mm should be taper and 5mm (±0.25) thick 135mm wide PVC Sheet for top rail and bottom rail in which 125 mm should be flat & 5mm taper on either side of panel. also for lock rail 145 mm sheet 125 mm should be flat & 5 mm taper on either side . An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive . Panelling of 10mm Prelam PVC sheet to be fitted in the M.S.Frame welded/sealed to the stiles & rails with 30mm wide x 5mm(±0.25) thick PVC sheet beading on either side and additional 30mm wide PVC beading as gap insert below top and bottom rail joined together using solvent cement adhesive.15mm thick (5mm(±0.25) x 3) 20mm wide cross PVC sheet as gap insert for top & bottom rail. Door to be fixed with frame with 3 Nos. M.S powder coated butt hinges of size 100mm*25mm*2mm and 50mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardware of door should be fixed with 25mm*8mm size steel screws etc. complete as per direction of Engineer-in-charge manufacturer's specification and drawing.

Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid C.P. brass hinges and rubber buffers 10 lts. High level P.V.C.. flushing cistern (of approved make ) with fittings rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete cutting and making good the walls ad floors where required. a) W.C. pan with white plastic seat and lid.

Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern 32 mm diameter M.I. or C.P. brass trap and union complete including cutting and making good the walls where required. a) Flat back wash basin size 630 x 450mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete without door : a) 110 mm dia

Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete without door : b) 75 mm dia

Providing and fixing rigid PVC S.W.R. (soil waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed: a) 110 mm dia

Providing and fixing rigid PVC S.W.R. (soil waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed: b)75 mm dia

Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. a) 110 mm dia

Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. b) 75 mm dia

Providing and fixing single Tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc complete with door: a) 110 mm dia

Providing and fixing single Tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc complete with door: b) 75 mm dia

Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete with door: a) 110 mm dia

Providing and fixing single “Y” of rigid PVC (approved make) for S.W.R. pipes including lubricating etc complete with door: b) 75 mm dia

Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes : a) 110 mm dia

Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes : b) 75 mm dia

Providing and fixing R.P.V.C. vent cowl: a) 110 mm dia

Providing and fixing R.P.V.C. vent cowl: b)75 mm dia

Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with sheet flance 20mm Jaquar make or equivalent. Confirming to IS 8931:1993 a) 20mm nominal bore

Providing and fixing NICKEL chrome plated copper alloy Fancy waste coupling 32 mm with 190 mm long connection pipe wall flance Jaquar make or equivalent. Confirming to IS 8931:1993

Dismantling wood work of sectional area 40 sq.cm. and above wrought framed and fixed in frames other frames and trusses including stacking of material within 50 mts. lead (span upto 10 mtrs.)

Providing & fixing bevelled edge mirror of superior glass (5mm thk) of approved Quality shape & size complete with CP brass screws and washers Cleats CP studs etc Complete.

Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead. With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete.

Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade

Supply of labour

Transportation and carriages of material by tipper truck including loading, unloading and stacking. (A) Lime, building rubbish, manure sludge, moorum excavated rock. VII) 15kms