Public Works Department Tender

Supply,Installation Testing Commissioning of following size cast iron double flange Butterfly Valve with matching flange, nut bolts & gasket.80mm

Supply,Installation Testing Commissioning of following size cast iron double flange Non Return Valve with matching flange, nut bolts & gasket.80mm

Supplying and fixing priming tank HDPE 10000 liters capacity

Supply,Installation Testing Commissioning of pressure gauge of 100 mm Ø., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe, elbow etc.

Supply,Installation Testing Commissioning of pressure switch with 12/15 mm Ø isolation valve, G.I. nipple, elbow etc.

Supply, Installation & Testing of First aid Hose reel conforming to IS 884 completes with 19 mm dia bore reinforced braided rubber hose of 30 mtrs length fitted with 6.35mm dia shut off Nozzle, 25 mm dia ball valve etc. The hose reel shall be manual 180 deg. swining type with reel drum hose shall be provided with coupling.

Supplying and installation of autoglow Hose Reel Hose Signage

Supplying and installation of autoglow Assembly Point signage

Supplying and installation of autoglow Arrow Tape (Line of Escape) Signage

Supply, Installation, perfect aligning and proper leveling and testing and Commissioning of centrifugal pump set , electric driven complete with all accessories suitable for pumping water 450 LPM discharge at 40 m head coupled with suitable size of electric motor AC 3 phase, 50Hz including supply and fixing the items, such as , necessary connection from starter to motor terminal using proper size of copper cable including ,connection of suction pipe from pump to foot valve, delivery pipe connected to the raising mains of the over head rservoir by means of suitable joints painting the suction and delivery pipe with super enamel paint over a coat of primer as per standared code of colour including MS base plate complete complete all as specified and directed. Rates Including RCC foundation and the foundation size should be as per standard/ manufacutre recommended.

Control Panel for Fire pumps. Fabrication, Supplying, Installation, Testing & Commissioning of electrical control panel, of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection, having switchgears and accessories mounting and internal wiring, earth terminals, numbering etc. complete in all respects, suitable for operation on 415 V, 3 phase, 50 HZ. AC supply with enclosure protection class IP 42 as required. (a) 50 amps TPN MCCB 25 kA with with spare feeder (b) Voltmeter (0-500 Volts) with selector switch. (c) Ammeter (0- 100Amps.) with selector switch & CT's etc. (d)Set of 3 Phase indicating lamp. (e) Set of AL.bus bar Amps. (b) Main pump - 1 No 32 Amps. TP&N MCCB 25KA with automatic DOL starter with over load protection, current sensing type single phase preventor, Indication lamp with ON/OFF push buttons complete with all accessories and internal wiring required for automatic operation,selector switch for local/remote,auto/manual/OFF operation.

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 x 6 Sq. mm.

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098 (Part I) with latest amendments of following size. 4 Core 10 sq. mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

Supplying and laying 25 mm x 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required

Supply of 2 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 2 Core 1.5 sq.mm

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately). (a) In soily strata

Refilling and reinstallation of CO2 type 4.5 kgs fire extinguishers at site.

Refilling and reinstallation of ABC 4 kg type fire extinguishers at site.

Brick work using common burnt building bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with bricks of class designation 75 kgs/ cm2 (wire cut bricks) In foundation and plinth.

Supply, fabrication, Erection, of Structural supports

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (3) 3 x 6 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required . 4 x 10 sq. mm.