Public Works Department Tender

Providing and making of Staff Table - (T2C) of size 1.50m X 1.5m X 0.75m ( Side length of 1.34m ) made of 25mm thick marine block board with desk top over it glass top 5mm thick with chamfered edge. Vertical sides of 19mm Marine Plywood finished with 1mm thick Laminate having 6mm thick chamfered teak wood moulding & storage two sliding drawer of 150mm depth of 12mm thick marine ply and two openable shutter below it with internal 1mm thick off-white laminate . Including necessary hardware such as SS hinges, keyboard telescope drawer channel,10cm Chrome plasted handles, Locks for drawers & shutters. G.I support 25x25mm 2mm thick welded together with rubber bushes at base & G.I Flats 3mm thick welded vertilcal supports to table top. Powder coated Keyboard shelf with mouse pad holder fixed on sliders & CPU Shelf with castors to be provided. 2'' dia cable manager and all external 1mm thick Laminate finish & inside French polish complete as per Architectural drawings and Engineer in charge.

Providing and making of Staff Table - (T3 - H.C & O.S) of size 1.50m X 1.50m X 0.75m made of 25mm thick marine block board with desk top over it glass top 5mm thick with chamfered edge. Vertical sides of 19mm Marine Plywood finished with 1mm thick Laminate having 6mm thick chamfered teak wood moulding & storage two sliding drawer of 150mm depth of 12mm thick marine ply and two openable shutter below it with internal 1mm thick off-white laminate . Including necessary hardware such as SS hinges, keyboard telescope drawer channel,10cm Chrome plasted handles, Locks for drawers & shutters. G.I support 25x25mm 2mm thick welded together with rubber bushes at base & G.I Flats 3mm thick welded vertilcal supports to table top.M.S aluminium powdercoated laser cut design plate fixed to front side of table with T.W beading. Powder coated Keyboard shelf with mouse pad holder fixed on sliders & CPU Shelf with castors to be provided. 2'' dia cable manager and all external 1mm thick Laminate finish & inside French polish complete as per Architectural drawings and Engineer in charge.

Providing and making of Staff Table - (T4 - For Asst. Directors & Deputy Directors) of size 1.50m X 1.75m X 0.75m made of 25mm thick marine block board with desk top over it glass top 5mm thick with chamfered edge. Vertical sides of 19mm Marine Plywood finished with 1mm thick Laminate having 6mm thick chamfered teak wood moulding & storage two sliding drawer of 150mm depth of 12mm thick marine ply and two openable shutter below it with internal 1mm thick off-white laminate . Including necessary hardware such as SS hinges, keyboard telescope drawer channel,10cm Chrome plasted handles, Locks for drawers & shutters. G.I support 25x25mm 2mm thick welded together with rubber bushes at base & G.I Flats 3mm thick welded vertilcal supports to table top. Powder coated Keyboard shelf with mouse pad holder fixed on sliders & CPU Shelf with castors to be provided. 2'' dia cable manager and all external 1mm thick Laminate finish & inside French polish complete as per Architectural drawings and Engineer in charge.

Providing and making of Staff Table - (T5 - Directors Table) of size 1.80m X 0.90m X 0.75m made of 25mm thick marine block board with desk top over it glass top 5mm thick with chamfered edge. Vertical sides of 19mm Marine Plywood finished with 1mm thick Laminate having 6mm thick chamfered teak wood moulding & storage two sliding drawer of 150mm depth of 12mm thick marine ply and two openable shutter below it with internal 1mm thick off-white laminate .19mm thick Plywood with 6mm thick beading patti for front and side panel. Including necessary hardware such as SS hinges, keyboard telescope drawer channel,10cm Chrome plasted handles, Locks for drawers & shutters. G.I support 25x25mm 2mm thick welded together with rubber bushes at base & G.I Flats 3mm thick welded vertilcal supports to table top. Powder coated Keyboard shelf with mouse pad holder fixed on sliders & CPU Shelf with castors to be provided. 2'' dia cable manager and all external 1mm thick Laminate finish & inside French polish complete as per Architectural drawings and Engineer in charge.

Providing and making of Staff Table - (T6 - Directors Side Table) of size 0.90m X 0.45m X 0.75m made of 25mm thick marine block board with desk top over it glass top 5mm thick with chamfered edge. Vertical sides of 19mm Marine Plywood finished with 1mm thick Laminate having 6mm thick chamfered teak wood moulding. Powder coated Keyboard shelf with mouse pad holder fixed on sliders & CPU Shelf with castors to be provided. 2'' dia cable manager and all external 1mm thick Laminate finish & inside French polish complete as per Architectural drawings and Engineer in charge.

Providing and making of Staff Table - (T7 - Reception Table) of size 1.80m X 0.90m X 0.75m made of 25mm thick marine block board with desk top over it glass top 5mm thick with chamfered edge. Vertical sides of 19mm Marine Plywood finished with 1mm thick Laminate having 6mm thick chamfered teak wood moulding & storage with 12mm thick marine ply shelves with two openable shutter with internal 1mm thick off-white laminate .20mm thick cutout with 6mm thick beading patti for front panel. Including necessary hardware such as SS hinges,10cm Chrome plated handles, Locks for shutters. G.I support 25x25mm 2mm thick welded together with rubber bushes at base & G.I Flats 3mm thick welded vertilcal supports to table top. All external 1mm thick Laminate finish & table bottom French polish complete as per Architectural drawings and Engineer in charge.

Providing and supplying of cupboard (C1) of size 8.5m x 0.33m and ht. 2.15m made up of marine plywood with shutter and sides of cupboard of thickness 19mm thick marineplywood and 12mm thick marine plywood for back of cupboard, 19mm marine plywood for horizontal shelves @0.34m c/c and vertical partition, including teak wood beading to all cut edges with outside 1mm thick Laminate and 1mm thick off-white laminate with melamine polish complete. Soft closing hinges with necessary screw 6” long size SS handle, cupboard locks etc complete. as per the Architect drawings and Engineer in charge.

Providing and supplying of cupboard (C2) of size 2.45m x 0.32m and ht. 0.65m made up of marine plywood with shutter and sides of cupboard of thickness 19mm thick marineplywood and 12mm thick marine plywood for back of cupboard, 19mm marine plywood for horizontal shelves @0.30m c/c and vertical partition, including teak wood beading to all cut edges with outside 1mm thick Laminate and 1mm thick off-white laminate with melamine polish complete. Soft closing hinges with necessary screw 6” long size SS handle, cupboard locks etc complete. as per the Architect drawings and Engineer in charge.

Providing and supplying of cupboard (C3) of size 1.8m x 0.45m and ht. 2.15m made up of marine plywood with shutter and sides of cupboard of thickness 19mm thick marineplywood and 12mm thick marine plywood for back of cupboard, 19mm marine plywood for horizontal shelves @0.0.34m c/c and vertical partition, including teak wood beading to all cut edges with outside 1mm thick Laminate and 1mm thick off-white laminate with melamine polish complete. Soft closing hinges with necessary screw 6” long size SS handle, cupboard locks etc complete. as per the Architect drawings and Engineer in charge.

Providing and supplying of cupboard (C4) of size 3m x 0.45m and ht. 2.15m made up of marine plywood with shutter and sides of cupboard of thickness 19mm thick marineplywood and 12mm thick marine plywood for back of cupboard, 19mm marine plywood for horizontal shelves @0.40m c/c and vertical partition, drawers of depth 0.20m of 12mm marine plywood & front of drawers and shutters of 19mm thick blockboard, including teak wood beading to all cut edges with outside 1mm thick Laminate and 1mm thick off-white laminate with melamine polish complete. Soft closing hinges, with necessary screw 6” long size SS handle, drawer sliders etc complete. as per the Architect drawings and Engineer in charge.

Providing and supplying of cupboard (C5) of size 0.9m x 0.45m and ht. 2.15m made up of marine plywood with shutter and sides of cupboard of thickness 19mm thick marineplywood and 12mm thick marine plywood for back of cupboard, 19mm marine plywood for horizontal shelves @0.4m c/c and vertical partition, including teak wood beading to all cut edges with outside 1mm thick Laminate and 1mm thick off-white laminate with melamine polish complete. Soft closing hinges with necessary screw 6” long size SS handle, cupboard locks etc complete. as per the Architect drawings and Engineer in charge.

Providing and supplying of cupboard (C6) of size 3.30m x 0.45m and ht. 2.15m made up of marine plywood with shutter and sides of cupboard of thickness 19mm thick marineplywood and 12mm thick marine plywood for back of cupboard, 19mm marine plywood for horizontal shelves @0.4m c/c and vertical partition, including teak wood beading to all cut edges with outside 1mm thick Laminate and 1mm thick off-white laminate with melamine polish complete. Soft closing hinges with necessary screw 6” long size SS handle, cupboard locks etc complete. as per the Architect drawings and Engineer in charge.

Providing and supplying of cupboard (C7) of size 1.60m x 0.45m and ht. 2.15m made up of marine plywood with shutter and sides of cupboard of thickness 19mm thick marineplywood and 12mm thick marine plywood for back of cupboard, 19mm marine plywood for horizontal shelves @0.4m c/c and vertical partition, including teak wood beading to all cut edges with outside 1mm thick Laminate and 1mm thick off-white laminate with melamine polish complete. Soft closing hinges with necessary screw 6” long size SS handle, cupboard locks etc complete. as per the Architect drawings and Engineer in charge.

Providing and supplying of cupboard (C8) of size 5.00m x 0.45m and ht. 2.15m made up of marine plywood with shutter and sides of cupboard of thickness 19mm thick marineplywood and 12mm thick marine plywood for back of cupboard, 19mm marine plywood for horizontal shelves @0.4m c/c and vertical partition, including teak wood beading to all cut edges with outside 1mm thick Laminate and 1mm thick off-white laminate with melamine polish complete. Soft closing hinges with necessary screw 6” long size SS handle, cupboard locks etc complete. as per the Architect drawings and Engineer in charge.

Providing and supplying of cupboard (C9) of size 1.36m x 0.45m and ht. 2.15m made up of marine plywood with shutter and sides of cupboard of thickness 19mm thick marineplywood and 12mm thick marine plywood for back of cupboard, 19mm marine plywood for horizontal shelves @0.4m c/c and vertical partition, including teak wood beading to all cut edges with outside 1mm thick Laminate and 1mm thick off-white laminate with melamine polish complete. Soft closing hinges with necessary screw 6” long size SS handle, cupboard locks etc complete. as per the Architect drawings and Engineer in charge.

Providing and supplying of cupboard (C10) of size 1.36m x 0.45m and ht. 2.15m made up of marine plywood with shutter and sides of cupboard of thickness 19mm thick marineplywood and 12mm thick marine plywood for back of cupboard, 19mm marine plywood for horizontal shelves @0.4m c/c and vertical partition, including teak wood beading to all cut edges with outside 1mm thick Laminate and 1mm thick off-white laminate with melamine polish complete. Soft closing hinges with necessary screw 6” long size SS handle, cupboard locks etc complete. as per the Architect drawings and Engineer in charge.

Providing and fixing plywood partitions with frame work of 37.5x37.5 mm aluminium pipe horizontally and vertically at equal distance and fixed with 12mm thick marine ply on both sides with 1mm thick laminate including providing and fixing 20 mm thick first class T.W. beading / lipping for edges including Melamine polishing. Fixing of 4mm thick glass with buff sticker with design etc. compelete

Providing and fixing plywood partitions with frame work of 37.5x37.5 mm aluminium pipe horizontally and vertically at equal distance and fixed with 12mm thick marine ply on both sides with 1mm thick laminate including providing and fixing 20 mm thick first class T.W. beading / lipping for edges including Melamine polishing etc. compelete

Providing and fixing plywood partitions with frame work of 37.5x37.5 mm aluminium pipe horizontally and vertically at equal distance and fixed with 12mm thick marine ply on both sides with 1mm thick laminate including providing and fixing 20 mm thick first class T.W. beading / lipping for edges including Melamine polishing. Fixing of 4mm thick glass with buff sticker with design etc. complete

Providing and fixing blockboard doors with 1mm thick laminate including providing and fixing 20 mm thick first class T.W. beading / lipping for edges including Melamine polishing, Fixed glass 4mm thick with SS Chrome plated handles (30cm length) etc. Compelete

Providing and fixing plywood partitions with frame work of 25X25mm aluminium pipe horizontally and vertically at equal distance and fixed with 10mm thick marine ply on both sides with 1mm thick laminate including providing and fixing 12mm thick first class T.W. beading / lipping for edges including Melamine polishing. Fixing of 4mm thick glass with buff sticker with design & soft board with fabric on top etc. compelete

Providing and fixing plywood partitions with frame work of 25X25mm aluminium pipe horizontally and vertically at equal distance and fixed with 10mm thick marine ply on both sides with 1mm thick laminate including providing and fixing 12mm thick first class T.W. beading / lipping for edges including Melamine polishing. Fixing of 4mm thick glass with buff sticker with design etc. compelete

Providing and supplying High back chair of Godrej Make model- Marvel-Very high back as per direction of the Engineer in charge.

Supplying High back Versa mesh chair with castor comes equipped with an active Bio-synchro mechanism ,T-spine structure, PU top armrests & height adjustments as per the direction of the Engineer incharge.

Providing and supplying M.S Powder coated Traverse 3 seater with arms as per direction of the Engineer in charge.

Supplying Versa mesh visitor chair comes equipped with PU top armrests as per the direction of the Engineer incharge.

Providing and supplying Gain pro Locker unit (4 door Numeric lock without envelope slot) of size 1950H * 375W * 470D as per direction of the Engineer in charge.

Providing and supplying Dual Coffee table with 3-level storage with drawers and glass top as per direction of the Engineer in charge.

Providing and supplying Optimizer Plus ( size: 1200W * 400D * 1980H ) with push pull solid back panel with C-shaped handles, Front & rear panels with perforations for ventilation, centralised locking system with locking stiffener on the last unit to lock all units together as per direction of the Engineer in charge.

Providing and supplying Optimizer Plus ( size: 1200W * 400D * 1980H )with push pull solid back panel with C-shaped handles, Front & rear panels with perforations for ventilation, centralised locking system with locking stiffener on the last unit to lock all units together as per direction of the Engineer in charge.

Providing and fixing 15mm thick densified tengular edged eco friendly light weight Calcium Silicate false ceiling tiles (like Aerolite Brand or Equivalent) of approved texture Spintone/ Cosmos/ Fine Fissured or equivalent of size 595mm x 595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per square metre. including both side) consisting of main "T" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minium) sheet, spaced 1200mm center to center, and cross "T" of size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size on a Perimeter wall angle precoated steel of size 600x600mm, resting on periphery walls/ partitions (24x24x300mm) made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm and laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture light fittings, fixture, smoke detectors etc., wherever required. Main "T" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to celing using with 12.5mm dia and 50mm long dash fastners, level clips of size 85x30x0.8mm, spaced at 1200mm center to center along main "T" bottom exposed with 24mm of T-section shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings etc. complete (As Directed by Engineer in Charge) Note: Only Calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having are less than 0.30 sqm. The Calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection85% non-combustible as per B.S.476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC. Hospitals, Offices and Commercial Buildings, Auditoriums and Cinema Hall, Educational Institutions, R&D Centers, Studios, Laboratories, Library, Canteen.