Public Works Department Tender

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level uniform and free from streaks and holes as per MORTH Specification 803

Transportation and Carriage of Materials (A) By Tipper truck including loading, unlaoding and stacking . (ii) Earth upto 5Km.

Providing and applying tack coat with bitumen grade of 80/100 or bitumen emulsion using pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom as per MoRT&H specifications clause 503. Bitumen 80/100@ 0.20 kg/sq.m

Construction of granular sub-base by providing coarse graded granitic or baslitic material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORTH Specification 401 For Grading I Material

Add 1% cess on item no. 6 and 7

Bituminous Macadam (Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per MORT& H Specifications,Fifth Edition ii) for Grading-II ( 19 mm nominal size )

Earthwork in excavation for roadway as per drawing and specification, in all types of strata comprising any of the material such as soil, silt, sand, clay, gravel, murrum of all varieties, shingles, pebbles all types of conglomerates, laterites rock, etc soft rock, ordinary rock or disintegrated rock fissured shattered/ decomposed rock or weathered rock all such material as described under appendix to those specification either in full or in parts as the case may be adopting mechanical means (hydraulic excavator) or any approved method or methods as the case may be convenient or permitted inclusive of chiseling and wedging etc in all conditions such as dry, moist,saturated, submerged, foul condition etc including setting out, construction of shoringand bracing, removal of stumps and other deleterious matter, dressing sides, ramming of bottoms,getting out the excavated soil/rock to be leveled and neatly dressed, pumping and bailing out of water, back filling the excavated earth to the extent required and utilizing the remaining earth locally for road work, barricading, danger lightening, guarding and disposal of excavated earth as directed by the engineer in charge all complete including all leads and lifts and upto depth of excavation as per MORT&H Specification 301.