Goa Tourism Development Corporation Limited Tender
View complete overview of Goa GTDC Tender
Costs
EMD
₹ 1,42,24,190Document Cost
₹ 30,000Tender Fee
₹ 6,000
Summary
Construction Of Unity Mall Goa At Chimbel Panaji Goa A Scheme Under The Special Assistance
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_GTDCL_15370_1Tender No
GTDC/PC/EE(N)/2023-24/e-88Tender Authority
Goa Tourism Development Corporation Limited ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Felling trees of girth(measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads : Beyond 60 cm and upto 120 cm girth
40
-
-
... More
Felling trees of girth(measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads : Beyond 120 cm and upto 240 cm girth
20
-
-
... More
Earth work in excavation over areas of all type of strata comprising of any type of material such as soil ,silt,clay, sand, saturated soil, gravel, murum of all varieties, shingles, pebbles, all type of congolmerates,latrite rock,soft rock,ordinary rock, disintegrated rock,fissured/shattered rock, decomposed rock, weathered rock and all such material either in full or part as the case may be adopting any method/ methods as may be convenient or permitted (blasting prohibited) including chiselling ,wedging,etc., in all conditions such as dry , moist, foul, saturated, submerged, etc., as directed by the Engineer etc., all complete including dressing of side ramming bottom, all leads and lifts, getting out excavated soil & stacking as directed , pumping and bailing out water, barricading,danger lighting, guarding as directed.
12484.54
-
-
... More
Earthwork in excavation in trenches for all leads & lifts in all type of strata comprising of any type of materials either in full or part as the case may be adopting any method/methods as may be convenient as permitted excluding blasting in all conditions such as dry, moist, foul, saturated, submerged, etc,. including dressing of sides, planking & strutting, timbering ,ramming of bottom ,pumping and bailing out water ,barricading danger lighting guarding, getting out excavated soil & stacking as directed by Engineer for all leads & lifts etc. complete
569
-
-
... More
Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer .
734.8
-
-
... More
Supplying and filling Moorum in plinth under floors, trenches including watering ramming consolidating, dressing, complete.
14203.06
-
-
... More
Supplying and filling fine Sand in plinth under floors, trenches including watering ramming consolidating, dressing, complete.
78.75
-
-
... More
Providing and laying autoclaved aerated cement blocks masonry with 100mm/150mm/200mm AAC blocks in substructure & superstructure up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
3789.92
-
-
... More
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
4746.97
-
-
... More
Laterite masonry in neatly dressed stones of size as specified in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and superstructure
903.42
-
-
... More
Providing & laying damp proof coarse 25 mm thick with cement concrete with 1: 2:4 (1 cement: 2coarse sand: 4 graded granitic or basaltic stone aggrt. 10 mm. nominal size)
162.23
-
-
... More
Providing and laying cement concrete 1:2:4 (1 cement : 2 sand : 4 aggregate 10 mm and down side) for flooring, bedding as per drawings and as directed by Engineer below area of flooring as specified.
47.63
-
-
... More
Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:
All work up to Plinth level
2095
-
-
... More
Providing and laying up to floor 5 level cement concrete 1 : 2 : 4 ( 1 Cement : 2 coarse sand : 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces ,cement mortar 1:3 ( 1 cement : 3 fine sand ) including centering and shuttering etc. for string courses ,coping ,bed plate,anchor block,plain window sills and the like.
113.4
-
-
... More
Providing and laying in position machine batched concrete (BMC)/Ready mixed concrete ( RMC) , machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. All works upto floor V level. M-40 grade of concrete
2779.78
-
-
... More
Providing and laying in position machine batched concrete (BMC)/Ready mixed concrete ( RMC) , machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. All works upto floor V level. M-35 grade of concrete
12022.8
-
-
... More
Providing and laying in position machine batched concrete (BMC)/Ready mixed concrete ( RMC) , machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. All works upto floor V level. M-30grade of concrete
694.07
-
-
... More
Providing and laying in position machine batched concrete (BMC)/Ready mixed concrete ( RMC) , machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. All works upto floor V level. M-20grade of concrete
997.25
-
-
... More
Centering and shuttering including strutting, propping, & removal of form for Foundation, footings, bases of columns
2633.91
-
-
... More
Centering and shuttering including strutting, propping, & removal of form for Vertical surfaces such as retaining walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like
7892.69
-
-
... More
Centering and shuttering including strutting, propping, & removal of form for Columns, Piers, Pillars, Abutments, Posts and struts (square rectangle polygon in plan)
10086.33
-
-
... More
Centering and shuttering including strutting, propping, & removal of form for Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth
14632.32
-
-
... More
Centering and shuttering including strutting, propping, & removal of form for Staircases (except spiral staircases) excluding landing .
715.64
-
-
... More
Centering and shuttering including strutting, propping, & removal of form for Suspended floors, roofs, landings, shelves & their supports
23588.62
-
-
... More
Providing corrosion resistant steel CRS-50 bars of (SAIL, TATA, VIZAG, JSW Steel Ltd.)(Confirming to IS 1786 if 1985) for RCC work including bending, binding & placing in position in all the floors along with factory made precaste concrete cover blocks of specified s izes whose compressive strengthis not less than that of surrounding concrete in the structural member .
1605836.88
-
-
... More
Supply, assembly, installation and profiling of all post tensioning tendons includings all hardware, stressing of all tendons with equipments and skilled manpower, cement grouting of all tendons with equipments and skilled manpower, designing of post tensioned slab and beams as per IS : 1343 for bonded system as per layout issued by Consultants, getting design approved from Consultant, preparation of as built drawings for PT slabs and beams at all levels and lifts. Contractor should quote the rate considering HDPE (High Density Polyethylene) for sheathing material, Silica Grout to be used as a grouting material (only Cement - additive Grout), future prestressing provision & stressing ends to be protected.
12676.35
-
-
... More
Extra to be added for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de- shuttering and de-centering at all levels, over a height of 3.5m, for every additional height of 1m or part thereof. (Plan area to be measured) Suspended floors, roofs, landings, beams and balconies (plan area to be measured)
22977.89
-
-
... More
Applying a coat of hot bitumen (maxphalt 80/100 or equivalent) using 1.5 kg/sq.m. on damp proof course after cleaning the surface with brushes and finally with a piece of cloth light soaked in bitumen
154.5
-
-
... More
Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in position. First class Indian teak wood..
0.28
-
-
... More
Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size.
40 x 3 mm flat iron hold fast, 15 cm long
312
-
-
... More
Providing and fixing first class Indian teak wood moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surfaces etc. 50 X 12 mm
246.65
-
-
... More
Providing & fixing 35mm thk flush door shutter with 1st cl teak ply both faces, core of block board construction with frame of teak wood beading 35m x 12mm thick with well matched first class laminate 1 .00 mm Thick on both faces. Rate should be including cost of Adhesive, Nails during fixing etc. complete.
120.2
-
-
... More
Providing & fixing matt finished SS handles of SS 304 grade of steel with necessary screws etc. complete. 200 mm
10
-
-
... More
Providing & fixing Stainless Steel Cylindrical lock 60mm dia with pair of knob, keys etc. with necessary screws etc. for doors complete as approved by engineer. Entrance Function: Internal Push Button & External Key Operation
39
-
-
... More
Providing & fixing Stainless Steel tubular lever D-Type mortise handles with round/Square nose, 24mm Mortise/sash lock body & Strike plate (all SS Finish), Pin cylinder 60mm with one side key and other side knob/thumb turn with necessary screws etc. complete
6
-
-
... More
Providing and fixing Stainless steel D type handles with necessary screws etc complete
a) L 300mm/325mm x 22 to 25mm dia
58
-
-
... More
Providing & fixing bright finished Stainless Steel Aldrops with screws etc. complete. 250 x 150mm
14
-
-
... More
Providing and fixing bright finished Stainless Steel bearing hinges of 125 x 70 x 4 mm with necessary screws etc complete
156
-
-
... More
Providing & fixing 100 mm bright finished Stainless Steel SS 304 grade floor door Stopper with rubber cushion , magnetic catcher , screws etc. to suit shutter thickness complete.
4
-
-
... More
Providing & fixing bright finished Stainless Steel SS 304 grade Tower bolts (barrel type) with screws etc. complete. 300 x 10 mm
10
-
-
... More
Providing and fixing SS hydraulic door closer of approved make with necessary screws and fittings complete.
15
-
-
... More
Providing, supply & Fixing 2hrs. fire rated door Systems duly tested for Integrity & Insulation as per IS : 3614 part 2 & BS:476 part 20 & 22 to achieve the required integrity & insulation with hardwood frame (as per manufacturer's specification) with non-combustible heat resistance and asbestos free insulating material infill shutter of 56mm thk, faced with 4 mm thk waterproof ply & 1 mm thk laminate on both sides to form fully flushed shell frame complete with hardware preparations, prepunctured at factory including EPDM smoke seal , Panic Latch , stainless steel ball bearing hinges,2 hrs fire rated door closer & Vision Panel all complete as shown in drawings
102.06
-
-
... More
Providing and fixing sliding arrangement for flush door shutter with stainless steel rollers to run inside aluminium channel section of profile as per approved drawing with floor guide.
1
-
-
... More
Extra for cutting rebate in flush door shutter (total area of the door to be measured)
7.2
-
-
... More
Providing & fixing 31 mm thk marine plywood work in frames of doors using 19mm +12 marine ply (waterproof) finished with 1 mm approved laminate, all hardware,and other frames and fixed in position with required fastners, adhesive etc. complete as specified as shown in the drawings.
40.13
-
-
... More
Providing and fixing in position three tracks , three numbers of glass shutters Aluminium sliding window with pure ployster powder of thickness 75-80 microns with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter,good quality hardware and accessories like GI screws,Virgin PVC ,gaskets, Imported rollers , Concealed locks, silicon sealant on the periphery, etc complete including 6 mm thick plain glass with all required screws and nuts etc, complete.
99.61
-
-
... More
Providing and fixing in position two tracks , two numbers of glass shutters Aluminium sliding window with pure ployster powder of thickness 75-80 microns with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter,good quality hardware and accessories like GI screws,Virgin PVC ,gaskets, Imported rollers , Concealed locks, silicon sealant on the periphery, etc complete including 6 mm thick plain glass with all required screws and nuts etc, complete.
3.69
-
-
... More
Providing and fixing pure ployster powder of thickness 75-80 microns aluminum ventilators with aluminium frames 80 x 38 mm x 1.22 mm box type (including frame and shutter ) with three partitions using 6mm thk frosted glass in one partition, Exhaust opening in one partition & 6 mm thk glass louvers in one partition with using weight and size of section not less then as specified or as shown in drawing including sub frame ( wherever specified ) ,locking arrangement,silicon sealant ,EPDM gaskets, including all aluminum fixture and fittings etc. complete . Rectangular tube @0.478kg/m
0.57
-
-
... More
Supply and installation of Aluminium Louvers ventilator. The frame should be made of Aluminium tubes of size 100x50X1.50 mm thk and 50X25x1.50 mm thk C channels. Aluminium Z shaped louvers of 100mm should be fixed to the supporting frame with aluminium cleats, GI screws, etc complete. The whole assembly is powder coated with pure polyester paint. (MS framing to be paid separately).
0.57
-
-
... More
Providing and laying of aluminium fixed with 65mm x 38mm tubular frame with 6mm thick glass sections are powder coated with pure ployster powder of thickness 75-80 microns with approved standard accessories. The glass would be fixed with taper clips with EPDM beading
3.69
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of approved make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
102294.3
-
-
... More
Steel work welded ( SAIL , TATA , VIZAG & using electrodes of AdOr make only ) in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying one coat of primer of red lead paint before erection & one coat after erection. In Tees, Angles, flats and channels
1967.33
-
-
... More
Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25mm thick for folling shutterstop cover and spring.
68.04
-
-
... More
Providing and fixing 27.5cm long wire spring grade No.2 for rolling shutters.
36
-
-
... More
Providing and fixing top cover for rolling shutters
56.7
-
-
... More
Providing and fixing Ball bearings for rolling shutters
12
-
-
... More
Providing and fixing pre-fabricated Double leaf compound gate with outer frame 120 X60 mm Box section with 16mm bright square bars scroll of 16 X 8 mm flat with aldrop tower – built , cover plate and bearing including providing 450 mm height 300 mm width motifs of M S plate 4 mm thick and locking arrangement, pintals and hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggregate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction of Engineer including transportation and loading , unloading charges etc complete.
1985
-
-
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
2783.3
-
-
... More
Providing and fixing M.S. plain grill of required pattern in Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws with applying a priming coat of approved steel primer .
1494.16
-
-
... More
Providing and fixing of S.S. AISI 316 grade Railing of 1.05m high with glass panelling of 10mm toughened glass of approved make & approved colour fitting with S.S. glass studs with verticals of 38 X 38 mm S.S. pipe (16 guage - 1.25mm thk) at spacing of 1200mm c/c with fixing in Granite with core cutting & Chemical Grouting with top handrail of 50 mm dia S.S. pipe (16 guage - 1.25mm thk) as per detailed design and drawing or as directed by Engineer. including all materials, labour and equipment etc. complete.
922.9
-
-
... More
Providing and fixing of MS. railing system modular in form, chemically passivated assembled with fittings with top handrail of 50 mm M.S. pipe (16 guage - 1.25mm thk), verticals of 50 mm M.S. pipe (16guage - 1.25mm thk) at spacing of 1000mm c/c with fixing in tread with with core cutting & Chemical Grouting, three horizontal of 25 mm M.S. pipe (16guage - 1.25mm thk) , railing height to be 1000 mm from finished floor level etc as per detailed design and drawing complete for all heights with applying a priming coat of approved steel primer and two coats of approved make and shade of synthetic enamel paint. The hand railing and other horizontal members shall be bent to the correct radius shown on the drawings by appropriate means without losing the profile of the pipe. as directed by Engineer.
5.25
-
-
... More
Providing and fixing of 12 mm clear laminated tempered glass railing fixed on Aluminium base shoe with SS cladding as per tender drawing with S.S. AISI 316 grade SS handrail of 50 mm dia (16 guage - 1.25mm thk) fixed with SS handrail bracket along the length of laminated tempered glass railing . Aluminium base shoe fixing in Granite with required anchoring, grouting as per detailed design and drawing or as directed by Engineer including all materials, labour and equipment etc. complete.
5.25
-
-
... More
Providing and laying Rectified and vitrified Satin finish decorative type tiles of size 800 mm x 1200 mm and 10 mm thick having water absorption within 0.1% to 0.5% and conforming to IS Code 15622 of approved make, shade and pattern for flooring in required position laid on 20mm thk cement mortar 1:4 (1cement: 4 coarse sand) including neat cement float, grouting, filling joints with cement slurry, curing and cleaning etc. complete. ( Price Range Rs. 850 to Rs.900 Per Sq.M )
15669.77
-
-
... More
Providing and laying Rectified and vitrified Satin finish finish decorative type tiles of size of 800 mm x 1200 mm and 10 mm thick having water absorption within 0.1% to 0.5% of approved make, shade and pattern for Skirting ,dado in required position laid on a back coat of 12 mm cement mortar 1:3 including neat cement float,grouting, filling joints with cement slurry, curing and cleaning etc. Complete. ( Price Range Rs. 850 to Rs.900 Per Sq.M )
1742.78
-
-
... More
Providing and laying Rectified and vitrified Antiskid finish decorative type tiles of size 600 mm x 1200 mm and 10 mm thick having water absorption within 0.1% to 0.5% and conforming to IS Code 15622 of approved make, shade and pattern for flooring in required position laid on 20mm thk cement mortar 1:4 (1cement: 4 coarse sand) including neat cement float, grouting, filling joints with cement slurry, curing and cleaning etc. complete. ( Price Range Rs. 600 to Rs.700 Per Sq.M )
3382.04
-
-
... More
Providing and laying Rectified and vitrified decorative type tiles of size of 600 mm x 1200 mm mm and 10 mm thick having water absorption within 0.1% to 0.5% of approved make, shade and pattern for Skirting ,dado in required position laid on a back coat of 12 mm cement mortar 1:3 including neat cement float,grouting, filling joints with cement slurry, curing and cleaning etc. Complete. ( Price Range Rs. 600 to Rs.700 Per Sq.M )
1742.78
-
-
... More
Providing and fixing 1st quality ceramic glazed wall tiles with Wall Ceramic Glazed Tiles : 300 x 600 (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete. (Price range Rs.775 to Rs. 825 Per Sq.M )
5.25
-
-
... More
Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of lime mortar 1:1:1 (1 lime putty : 1 surkhi : 1 coarse sand)
380.93
-
-
... More
Kota stone slab 20 mm thk. skirting, in risers of steps, dado and pillars laid on 12mm(avg.) thk. Cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of ( Price range 480 to 550Rs per Sq Mtr.)
33.08
-
-
... More
Providing and laying approved flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer.
( Price range 1600 to 1700Rs per Sq Mtr.)
1038.35
-
-
... More
Providing & fixing approved Flame Finish Granite Tread Tiles 20 mm thk. in single piece with rounded off nosing, antiskid groove laid on 20 mm (average) thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) with neat cement slurry including pointing with pigmented cement slurry to match the shade of slab, cleaning etc. complete. ( Price range 1600 to 1700Rs per Sq Mtr.)
884.99
-
-
... More
Providing and laying Approved Colour mirror Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer.
( Price range 1500 to 1600Rs per Sq Mtr.)
1044.17
-
-
... More
Providing and fixing Approved Colour Polished Granite stone slabs (mirror polished) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.( Price range 1500 to 1600Rs per Sq Mtr.)
1303.55
-
-
... More
Providing and and laying vitrified unglazed porcelain tactile floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete 300 x 300 mm Design - Liner
378
-
-
... More
Providing and and laying vitrified unglazed porcelain tactile floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete 300 x 300 mm Design - Buttons
94.5
-
-
... More
Providing and fixing 18 mm thick Granite of any colour and shade, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, door frames and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. area of slab over 0.50 sqm ( Price range 1500 to 1600Rs per Sq Mtr.)
328.28
-
-
... More
Providing 25mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer. ( Price range Rs.300 to Rs.350 per. Sq.M )
168.13
-
-
... More
Extra for providing opening of required size & shape for wash basins / kitchen sink in kitchen platform, vanity counters and similar location in marble / granite / stone work including necessary holes for pillar tap etc. including rubbing and polishing of cut edges etc. complete.
72
-
-
... More
Providing and laying approved flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 40 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer.
( Price range 2300 to 2400Rs per Sq Mtr.)
5.25
-
-
... More
Providing and laying Rectified and vitrified WOODEN TEXTURED finish decorative type tiles of size 800 mm x 1200 mm and 10 mm thick having water absorption within 0.1% to 0.5% and conforming to IS Code 15622 of approved make, shade and pattern for flooring in required position laid on 20mm thk cement mortar 1:4 (1cement: 4 coarse sand) including neat cement float, grouting, filling joints with cement slurry, curing and cleaning etc. complete. ( Price Range Rs. 850 to Rs.900 Per Sq.M )
889.35
-
-
... More
Providing and laying Rectified and vitrified WOODEN TEXTURED finish decorative type tiles of size of 800 mm x 1200 mm and 10 mm thick having water absorption within 0.1% to 0.5% of approved make, shade and pattern for Skirting ,dado in required position laid on a back coat of 12 mm cement mortar 1:3 including neat cement float,grouting, filling joints with cement slurry, curing and cleaning etc. Complete. ( Price Range Rs. 850 to Rs.900 Per Sq.M )
21.84
-
-
... More
Providing and fixing in position Glass mossaic tiles at finished plain/flat/curved/inclided surface of size 10-50 mm square x 4 mm in all colour, design , fixing in customize design as per direction of Engineer. The glass mosaic tiles to be fixed on the surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer.
458.85
-
-
... More
15mm EPDM flooring (9mm SBR + 6mm EPDM) : Providing and laying approved 9mm insitu base layer of SBR granules of size 2 to 4 mm using PU binder of BASF / DOW /Huntsman make on concrte /tremix top with adquete drainage 6mm EPDM top using granules of 1 to 4 mm size which can resist UV radiation and withstand severe weather conditions and approved colour complete for safety of kids in play areas . Including cost of PU binder / Glue etc as requiered for the works
491.4
-
-
... More
Providing leather finished polishing to Granite Stones labby continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing processbe for laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.
714
-
-
... More
Providing and laying integral cement based treatment (Box type) for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer and consisting of : i) Ist layer of 20 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer using rough Shahbad/Kotah stone.
7387.71
-
-
... More
Providing and laying integral cement based treatment (Box type) for water proofing on the vertical surface by fixing specified stone slab 20 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer using rough Shahbad/Kotah stone.
1284.4
-
-
... More
Cleaning the surface and filling cracks (if any), applying epoxy putty wherever necessary, Providing and applying 3 coats of High performance moisture compatible corrosion resistant Food grade non toxic epoxy stearate coating (WATERSEAL) having impermeable film withstanding to hydrostatic pressure up to 5 kg/cm2 with a DFT of 250 microns on the prepared RCC surface. If there is honey combing or excessive unevenness in the surface then 10mm plaster in CM 1:3 should be applied on the entire surface followed by application of 2 coats of WATERSEAL with a DFT of 150 microns. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent.
1503.92
-
-
... More
Providing and fixing waterproofing treatment to sanitary blocks consisting of layers of Laterite stone coba of 75 mm thick in cement mortar 1:2 sand witched between two layers of cement mortar 1:4 (20 mm thick ) mixed with water proofing compound, top finishing coat of cement slurry 6 to 12 mm thick with water proofing compound etc. complete with 32 mm dia PVC pressure relief pipe of adequate length including waterproofing treatment to 750 mm height (maximum) of side wall, and bottom surface in cement mortar 1:4 with waterproofing compound and covering 10 years guarantee on court fee stamp of Rs. 100 with ponding test including all lead, lift etc. complete as directed by Engineer.
273.35
-
-
... More
Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.
5981.58
-
-
... More
Providing & fixing Asphalt shingles in approved colour and pattern for roof and ridge over 10mm thk bison board with APP waterproofing membrane including all fixing arrangements such as screwing etc complete and ensuring water tightening.
374.59
-
-
... More
Supply & fixing of 16mm thick 600 mm width MULTIWAL MULTICELL polycarbonate system consist of: The panels shall be uniform in color with an integral Microcell core. In a cross section, the core shall be constructed of tight cells with 6 walls. Panels will be supplied with Vertical Standing Seam at both sides of the panel Snap-on connector to interlock the panels shall have a grip-lock double tooth locking mechanism to ensure maximum uplift capability & shall be of same color as that of panel for aesthetic appeal. NOTE : Necessary Steel structure to be provided by the Steel fabricator. Skylights framework to be raised by by 200 mm from Roof Pan level.
2375.1
-
-
... More
Providing & Fixing in position Double Skin roof with Zincalume/ Galvalume colour coated & bare profile sheet with subtle square fluting factory cut at all heights for roof, side & Gable cladding complete in all respect. TOP SHEET-The end rib shall be designed for anti-capillary action. The feed material should be manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 43.5% Zinc &1.5% Si) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides) with quality paint coat as per AS/NZS 2728 type 3-4. The paint shall have a total coating thickness of nominal 35 μm, comprising of nominal 20 μm exterior SMP coat on top surface and nominal 5 μm reverse backer coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade. Total Coated Thickness (TCT) should be 0.50mm. Total Painted Thickness (TPT) should be in addition to 0.50mm. The steel sheet shall be fastened with nominal 40 μm zinc coated or nominal 25 μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners of approved make with EPDM washer as per the requirement considering the profile shape and design load. The fastener size shall be calculated as per the design or manufacturers recommendations. The profile sheet, fastener size etc. shall be approved by the Engineer. The sheeting should be with minimum 200mm lap & waterproof with Silicon sealant non-hardening neutral cure type shall be applied at all end laps, complete as directed Z-Sub Girt - roll formed section 50x50x50x1.50 TCT, 120GSM Galvanised, High Strength (345 MPa), approximate Wt. 1.85 kg/r.m. fixed with self tapping screws Rock Wool Insulation with FSK facing 50mm with 48 kg/m3 density in between 2 sheets. LINER SHEET-bare galvalume/zincalume roofing sheet of same profile as top sheet. The feed material is of manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.47 mm TCT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 45% Zinc) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides), passivated & resin coated. The feed material should have coil manufacturer’s product details marked at regular interval for confirming genuinity of the material. complete as per the directions of the engineer. The steel manufacturer's test certificate for the chemical & mechanical properties of steel must be submitted for approval prior to installation.
5.25
-
-
... More
Providing & fixing in position Galvalume/Zincalume flashings, cappings, ridges, gutters upto 600mm/610mm girth and min 3.00m in length (cold Rolled Steel 550 MPa yeild Stress ASTM A 446 Grade E) with hot-dip metallic coating of aluminium-zinc alloy(AZ 150 galvalume) (150 gms/sqm total of both sides with Al-Zn Composition= 55% & 43.5% resp. & 1.5% Si conforming to ASTM 792/ AS 1397) 0.45 mm base metal thickness and 0.50mm total coated thickness, factory cut at all heights for roof, side & gable cladding complete in all respects with AZ 150 GSM SMP color Coated (20mic exterior coat of Silicon Modified Polyester paint system over 5 mic primer and 5 mic polyester back coat over 5 mic primer) incl. fixing to purlins with no 12x14x55mm mechanically galvanised hex head self drilling screws of the best quality as per AS-3566 class 3-4 approved, which should be compatible to be used with sheets. with integral washers and EPDM seals etc. Silicon sealant non-hardening neutral cure type shall be applied at all end laps, complete as directed.
5.25
-
-
... More
12 mm thick cement plaster 1:4 (1 cement:4 fine sand)
25629.87
-
-
... More
6mm thick cement plaster with 1:3 (1 cement : 3 fine sand)
7251.94
-
-
... More
Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
32881.81
-
-
... More
Forming & Finishing the 20 mm groove in plastered surface & repair the edges as per specifications and directions of the Engineer In Charge.
21
-
-
... More
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.
23087.18
-
-
... More
Extra for plastering exterior walls of height more than 10m from ground level for every additional height of 3m or part thereof.
8111.31
-
-
... More
Extra for providing and mixing water proofing material proportion recommended by the manufacturers. (a)12mm cement plaster 1: 3 (1 cement : 3 sand)
17133.47
-
-
... More
Providing and filling joints between concrete and masonry wherever specified in cement mortar including raking the joints to form "V" groove, applying neat cement slurry, filling with aggregate of 20 mm or less (Katka) in cement mortar 1:4 (1 cement : 4 fine sand), cleaning and curing etc. to avoid cracks at the joints.
12680
-
-
... More
Providing and fixing GI hexagonal chicken wire mesh 22 gauge size of 20cm wide at the junction of dissimilar surface of brick / block masonry wall and RCC column/ beam and the like including necessary "U" nails for fixing , overlapping etc. complete as per specification and as directed by Engineer for all floors and at all height.
3994.2
-
-
... More
Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade
2606.33
-
-
... More
Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.
26243.64
-
-
... More
Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
29391
-
-
... More
White washing with lime on new work ( three or more coats) to give an even shade.
2299.79
-
-
... More
Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding, Painting etc. complete
919.52
-
-
... More
Extra for painting on walls on the outside at height more than 10m from ground level for every additional height of 3.0 m or part thereof.
8111.31
-
-
... More
Vaccum dewatering of laid concrete for roads/ areas using Tremix machinery including formwork with MS channel/ angle sections on sides of concrete with proper supporting system, surface/screed & needle vibrating & levelling of concrete. Vaccum dewatering should be done using suction mats (spread on surface) & suction pump, power floating/ troweling using screen floater, manual spreading of hardening compound (if any), smooth/rough/broom finish to the required slope, camber & level, groove cutting (upto 10mm wide x50mm deep) for contraction/expansion, construction & longitudinal joints, Providing dowel bars with sleeve/tie bars, filling two component polysuphide sealant/joint filler (Bitumen hot sealing compound: Grade A), taping with masking tape etc complete. (Concrete, reinforcement, Dowel Bar with sleeve/tie bar Reinforcement, tarpaulin sheet to be paid separately)
934.73
-
-
... More
Providing & Fixing Flat Type Rubberized speed breaker of 400 mm wide & 50 mm height for general traffic at preferred crossing speed of 25 km/h and above as per standard having and specification in IRC in Black / yellow colour . The rubberized speed breaker shall be fixed with all required nails, anchor fastners, accessories all etc. complete.
105
-
-
... More
Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. 60 mm thick in all colours except grey (M35 grade)
3854.55
-
-
... More
Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. 80 mm thick in all colours except grey (M40 grade)
879.9
-
-
... More
Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength,thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine fine aggregate (natural sand/crushed sand VSI grade finely washed etc.), compacting and proper embedding/laying of inter locking paver blocks into the fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and complete as per manufacturer spsecifications & direction of Engineer-in-Charge. 60mm thick CC paver block of M-35 grade concrete with approved colour and design & pattern. As directed by Engineer in charge
1035.3
-
-
... More
Providing and laying RED & BLACK GRANITE cobble stones of 100mm x 100mm x 100mm, 3 line dressing with 12 mm top layer in size of fine cut and well dressed in Grey colour in paving on a bed of min. 40 mm thick cushioning in C.M. 1:4 including neat cement float etc. filling of joints in C.M. 1:2 with grey cement to match the colour of cobble stone in the required pattern, design and as directed by the Engineer incharge, including cleaning, curing etc. complete.
603.75
-
-
... More
Supplying and fixing Pre-cast cement concrete kerb-stones(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification.
Size 60 cm L x45 cm H x 15 cm T
1727.25
-
-
... More
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including Reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be level uniform and free from streaks and holes as per MoRT & H Specification 803
189
-
-
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
5021.96
-
-
... More
Design, fabricate, package, deliver (to Job site) and install curtain wall systems comprising specified glass. The glass panels will be mechanically supported to the aluminium main frame with pressure plate & cover cap on outer surface and fixed onto mullions and transoms including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness,pressure equalisation & drainage and protection against fire hazard with all approved standard accessories and hardware’s of approved make. All aluminium extruded profiles shall be confirming to alloy 6063 T6. All Aluminium profiles shall be with pure ployster powder of thickness 75-80 microns and shade shall be as per architect's approval. The curtain wall shall be sealed to the host structure and not adjoining materials with approved water proofing membrane and insulation to prevent sound transmission. The System and glass shall be designed to withstand 1.5 times the design wind pressure at all levels, elevation & heights. The anchoring / bracing of the curtain wall system to the RCC slab / beams / columns shall be done with non-corrosive galvanized brackets of approved design (80-90 micron thickness) and including providing teflon shims of various thickness to adjust the beam level / line variations fixed with SS dash fasteners Hilti , Fisher or equivalent of min. 12mm dia. and depth of 50-80mm in the concrete and to withstand the dead load of the curtain walls as well as stresses due to wind pressure etc. Expansion joint gap for mullion shall be minimum 15 to 20mm filled with expansion joint sealant from Dow Corning of DC 790 . All screws, washers used shall be only stainless steel of 304 grade and Through Bolts , Nuts & anchors used shall be only stainless steel of 316 grade.The contractor must design the system as per the prevalent site conditions and building elevation profiles. No extra claims shall be entertained at any stage for aluminium profile wall thickness and size dimensions. Material supporting arrangements shown in the drawing are indicative and contractor shall make their own shop drawings and suggest method of fixing with type of anchors they propose to use where they are to be fixed. including providing and supplying at site additional frame with all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. Work to include required double legged independent scaffolding for entire height or as required to approval of the PM. with Double Glass Unit ( DGU - with U Value less than 2.69) of approved make & approved colour with 6 mm clear glass for inner lite ( Heat Strengthened ), 12mm air gap & 6mm approved colour glass for outer lite ( Heat Strengthened )
5.25
-
-
... More
Providing & fixing in position Frame less sensor operated glass double shutter sliding doors with 12 mm thick toughened crystal edge polished glass with approved etching design manufactured to relevant I.S. codes from approved manufacturer including cost of activators, switches, track and mounting profile, Carrier, Door suspension device with adjustable fixture, Motor with decoder,Track rail, Return pulley, Basic module, control with integrated switched power supply unit and multi-way connectors for optional expansion modules, Door stop, safety sensors etc.Dorma Make or equivalent as required all complete at all heights as per approved drawing and as directed by the Engineer-in-Charge. All exposed edges of the glass shall be ground, polished and rounded. The door shall be provided with sensing devices to detect motion in front of the door( Both Inner and Outer face ), activate the control mechanism and thus open and close the door.
10.08
-
-
... More
Supply and fixing of Customized perforated screen panel cladding fixed system . The Screen panels of various sizes maximum to 900mm X 4000 mm as per design requirement shall be manufactured from high corrosion resistant aluminium alloy of 3.0mm thickness which shall be fixed to a suitable and rigid MS substructure. Screen panels shall have customized perforation as per architects design and is to be provided to suite the design Panels. Panels shall be coated on visible side with Exterior Powder Coating in approved colour.
The panels of required length and height shall be fixed to sub structure by means of GI screen panel guide clamps of 20 x 43x 2mm . Panels shall be bending from all four sides and shall have extended flanges to accommodate clamps. The Panels shall be fixed to a suitable structure by means of fixing side extrusion fixed to the panel at appropriate centers to proprietary metal clamp to a support system taking into account the relevant live loads and a dead load. There will be a provision for an expansion joint of 20mm between two adjacent panel ends. Installation shall be carried out as per manufacturer recommendation.
Rate shall be exclusive of required MS substructure which will be paid in relevant item.
5.25
-
-
... More
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).
27620.78
-
-
... More
Providing, supplying and installing Exterior ventilated facades in minimum 30 mm thk terracota facade panels of approved colour , shade & size bearing maximum weight of approximately 55 Kg/sqm, with fireglazed exposed surface, with water absorption of 1.5% to 3% , antistaining treatment and all fixtures as per approved detailed shop drawing using 3 mm thick aluminium single & double wall brackets with center to center spacing not exceeding 0.90m or as approved, with HILTI / FISCHER make hexagonal anchor bolts of size 10 x 80mm, tightened by mechanical means, with vertical frame in form of aluminium T profile in grade 6063-T6, of size 100 x 60 mm, with flange thickness of 1.80mm and web thickness of 2.00mm , with 0.50mm deep serrations on the flange with fastening clips in SS410 plate 1.20mm thick , round & bent to facilitate mounting of terracota panels, to maintain a horizontal louvered groove of 7/8 mm width , with silicon sealant beading on the side of rear surface of terracota panels including all necessary materials, hardware, fixing, Scaffolding , inspecting, cleaning etc. complete. Rate to include supply & fixing of powder coated G.I. sheets/ aluminium angles for metal profiles at corners, jambs, soffits etc. Rate should be inclusive of required aluminium angles , cleats etc but excluding MS structural frame work. MS structural frame work will be paid in respective item .Material supporting arrangements shown in the drawing are indicative and contractor shall make their own shop drawings and suggest method of fixing with type of anchors they propose to use where they are to be fixed. Work to include required double legged independent scaffolding for entire height or as required to approval of the PM.
9746.8
-
-
... More
Providing anti-termite treatment to the buildings conforming to I.S.S.6113 part II 1971 (revised) including adopting the precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guaranty for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. The payment will be made on plinth of the building (a) preconstruction.
7186.2
-
-
... More
Making plinth protection 50mm thick of Cement Concrete 1:3:6 (1cement : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
324.45
-
-
... More
Drilling 150 mm deep hole in R C C and grouting the rebar, lockfix etc complete. 10 mm Dia
80
-
-
... More
Drilling 150 mm deep hole in R C C and grouting the rebar, lockfix etc complete. 12 mm Dia
85
-
-
... More
Drilling 150 mm deep hole in R C C and grouting the rebar, lockfix etc complete. 16 mm Dia
62
-
-
... More
Providing & fixing expansion joint between structural members by fixing 50 mm thick TF quality thermacol sheet on one surface to serve as shuttering as directed by engineer.
642.57
-
-
... More
Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer- In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates as per ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer's pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. Material shall confirm to ASTM 6063.
Roof Joint of 75 mm gap
100.36
-
-
... More
Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer's pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self –centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge . (Material shall confirm to ASTM 6063.) Floor Joint of 75 mm gap
756.45
-
-
... More
Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221-02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multi-cellular to facilitate movement. (Material shall confirm to ASTM 6063.) Wall Joint of 75mm gap
42.3
-
-
... More
Providing and fixing weepholes with rigid PVC make laid in position with a required slope and level while layingpipes of approved the concrete of retaining wall,wing wall and earth retainig structure complete as directed by the Engineer in charge 110 mm dia
313.2
-
-
... More
Providing and fixing weepholes with rigid PVC make laid in position with a required slope and level while layingpipes of approved the concrete of retaining wall,wing wall and earth retainig structure complete as directed by the Engineer in charge 75 mm dia
313.2
-
-
... More
Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects. Mural wall in theming as per tender drawing
125
-
-
... More
Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects. Themed Painting as per tender drawing
18
-
-
... More
Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects. Sitting Benches of required Length in FRP as per tender drawing
15
-
-
... More
Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects. Dustbin in single piece of Ht. 0.75m in FRP as per tender drawing
14
-
-
... More
Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects. Drinking water fountain of Ht. 0.75m i in FRP as per tender drawing
2
-
-
... More
Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects. Signages in FRP as per tender drawing
8
-
-
... More
Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects. Railing of Ht 0.9 m in FRP as per tender drawing
100
-
-
... More
Supplying and placing Play Equipment of ARIHANT INDUSTRIAL CORPORATION LTD.or equivalent make as per Below Mentioned Specifications , or As directed by engineer In-charge.
DOUBLE DECK MAPS - D3 (SPECIAL) 1. FRP SPIRAL SLIDE 10' HT 2. WAVE NET CLIMBER 3' HT 3.ROTO WAVE SLIDE 3' HT 4. ROTO 'S' TUBE SLIDE 10 ' HT WITH SLIDE ENTRY 5. FIRE MAN POLE 7' HT 6.G.I. PIPE LADDER 7' HT 7.DOUBLE DECK CROSS N ZERO RAILING 8.DOUBLE DECK STEERING WHEEL RAILING 9.DOUBLE ARC SWING 10.DOLPHIN SEE SAW 11. 4 SEATER M.G.R. 12. SPRING RIDER JUMBO .etc
1
-
-
... More
Supplying and spreading Geo fabric filter layer of geo textile of polypropylene multifilament woven to the line and level and grade with pore size less than 0.075mm and permeability greater than 9 lit/m2 confirming IS -1964 and American standard for testing of the material standards including conveying with to the site joning and stitching with proper over lap etc.in all conditions as directed by the engineer in charge
6015
-
-
... More
Providing and laying filter media with Granular materials crushed stone Aggregates satisfying the requirement As Per Clause 2504.2.2 of MOSRT & H Specification to a thickness of 500 mm laid horizontally in layers of 250mm thick and compacted to firm condition etc. complete as direction by Engineer-in-charge.
601.5
-
-
... More
Supplying and laying Laterite brick bat coba to the specified thickness of 250 mm laid horizontally and compacting to firm consitions etc. complete
902.25
-
-
... More
Supplying and fixing or site of work incl. loading, unloading and stacking at site PVC (RING FIT) pipes with elastomeric sealing ring ( one per pipe)& with rubber ring socket confirming to IS 4985-2000 & bearing ISI mark - pressure 6 kg/cm2 incl. conveying at site of work, lowering in trenches and perfect linking of joints incl. jointing by cleaning the joints and hydraulic testing of joints (holes in pipe of dia 10 mm @ every 20 cm c/c for perforation at opposite sides ) etc.Complete as direction by Engineer -in -charge.
328.9
-
-
... More
Providing and fixing 50x50mm snap-on PVC/Vinyl/ Acrylic 90 Degrees angles surface mounted corner guards as edge protection. It should have hi impact resistance, chemical and stain resistance. The inner extruded aluminium continuous retainer should be fixed to wall/concrete surface with non corrossive fastners which are compatible with aluminium retainer. Adjustable top & bottom matching end caps, high impact vinyl acrylic snap-on matt finished, consisting of PVC cover, base, top end etc complete. 900 to 1200 high.
297
-
-
... More
Providing and fixing G.I. chain link mesh 6.35cm x 6.35 cm x 10 gauge (2.5” x 2.5” x 10 gauge) fixed with angle iron posts and struts by G.I. or M.S. staples at 20cms apart with welding with the iron posts (placed at 3 meters centre to centre) including providing barbed wire stiffeners (shall weigh 9.33 kg. per 100 meters minimum) at top and bottom with barbed wire stiffers by binding wires at 50cms centre to centre complete as per the direction of the Engineer – in – charge (angle iron posts struts, earthwork and concrete for fencing posts and struts to be paid separately)
227.85
-
-
... More
Supplying and stacking of good earth ( Garden Soil) at site including royalty and carriage upto 1 km. (earth measured in stacks will be reduced by 20% for payment).
2868.47
-
-
... More
Spreading of sludge, dung manure or/and good earth (Garden Soil) in required thickness (cost of sludge, dung manure or/and good earth to be paid separately).
4321.08
-
-
... More
Supply at site of work/store deoiled Neem cake duly packed in used gunny bags as per MoRT & H Specification 308.2
8.71
-
-
... More
Supplying of sludge duly stacked at site/store as per MoRT & H Specification 308.2
1452.61
-
-
... More
Providing and fixing M.S. flat iron tree guard 60cm dia & 2 m high above ground level, formed of 4 nos. 25 x 6mm and 8 nos. 25 x 3mm vertical M.S. flat iron rings in two halves, bolted together with 8mm dia and 30 mm long bolts including painting two coats with paint of approved brand and manufacture over a coat of priming, complete in all respects.
50
-
-
... More
Filling mixture of earth & sludge or manure in the desired proportion in trenches flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded).
1225.35
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Artocarpus heterophyllus
16
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Anthocephalus cadamba
19
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Lagerstroemia speciosa
19
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Bauhinea purpurea
10
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Bauhinea venigeta alba
8
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Cordia dichotoma
19
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Mimusops elengii
10
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Michelia champaka
17
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Plumeria alba
5
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Plumeria rubra
6
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Khaya senegalensis
21
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Cassia fistula
31
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Phyllostachys aurea
10
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Mangifera indica
22
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Raphis exaltata
15
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Erythrina indica
6
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Plumeria Singaporensis
15
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Wodyetia bifurcata
41
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Cyrtostachys renda
15
-
-
... More
Providing, laying and planting various Trees & Palms as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Howea forsteriana
15
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Ophiopogon japonicus mini
6290
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Ophiopogon japonicus medium
8115
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs wedelia trilobata
4660
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Dianella tasmanica green
4280
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Dianella tasmanica verigated
3830
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Rhoeo Spathacea
1080
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Plumbago capensis
1020
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Alpinia zerumbet
320
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Spathyphyllum wallisii
515
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Heliconia psittacorum
160
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Syngonium Podophyllum
1285
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Hydrangea mycrophylla
1680
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Hymenocallis littoralis
965
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Hamelia patens dwarf
430
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Crinum latifolium
1505
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Cymbopogon citratus
880
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Alocasia macrorrhizos
5
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Heliconia Rostrata
645
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Heliconia Metalica
240
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs Calathea Lutea
175
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs pennisetum rubrum
290
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs pennisetum setaceum
140
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs canna indica
530
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs alpinia purpurata
130
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs strelitzia reginae
680
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs strelitzia parviflora
485
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs agave attenuata
10
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs zephyranthes candida
2005
-
-
... More
Supplying & Planting shrubs, creepers, ground covers, as listed below as per the mentioned size including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by the Engineer before plantation. Schedule of Shrubs zephyranthes grandiflora
3635
-
-
... More
Grassing with Selection One Lawn including adding fertilizers as per planting schedule, manure and Neem cake etc. including their maintainance upto 3 months during which the contractor is suppose to maintain all these in all respects such as watering, pruning, spraying of pesticides, fungicides, insecticides, adding fertilisers, removing of weeds as per specification and direction of the Engineer and also replacing with similar lawn in case of death of any portion.
2906.4
-
-
... More
PLUMBING WORKS
-
-
-
... More
Proving and fixing white vitreous china Wall Hung type (European Type) water closet with seat and lid with C.I. brass hinges and rubber fittings with flush valve nelson/ similar fully chromium plated with stop cock, wall flanges, flush pipe or elbow and vaccum breaker coupling etc. including chair bracket/rag bolts, cutting & making good the walls and floors where required and concealed seat support - W.C. Pan with white plastic seat and lid
96
-
-
... More
Providing and fixing white european type wall-hung pan, of size 350mm x 355mm x 570 mm concealed flush tank with floor-mounting frame installing kit and drain pipe connection set for wall hung WC, with approved make square control plates including soil pipe, vent pipe upto the outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings,cutting & making good walls, floors etc. complete
1
-
-
... More
Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.
96
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS 8931:1993 15mm nominal bore.
96
-
-
... More
Providing and fixing Orissa pan with P or S trap with including making and cutting good the walls with complete with seprate low level dual flushing citern discharge to 6lit/3 lit per flush with fitting ,angle cock and making pvc flexible inlet connection from angle cock to flush tank ,cutting, grooving, making good the walls etc. complete as per direction of engineer-in-charge.
2
-
-
... More
Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993
20
-
-
... More
Providing and fixing white vitreous china flat back Large lipped front urinal basin of 590x375x390mm size with Urinal Valve Auto closing system with built in control cock & wall flange with fittings, spreader, R.S. or C.I. brackets, standard size C.P. Brassl flush pipe and spreaders with C. P. brass unions & C. P. Brass clamps with waste fitting as per IS 2556, PVC trap with outlet grating and other couplings in CP Brass complete, including painting, fittings, cutting and making good the walls and floors where required. - Range of one urinal basin
72
-
-
... More
Providing and fixing approved make table top / undercounter Wash hand basin with tap hole - white vitreous china of size 450 x 450mm /605 x 430mm including pillar tap, 32 mm C.P.Waste coupling, bottle trap, angle valve including flexible inlet pipe,C.P.Wall Flange etc complete with necessary bolts, bents, tees, brass screws including cutting of granite, making holes in the wall if required and making the surface good to the satisfaction of Engineer.
90
-
-
... More
Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required.
6
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete. a. Overall size 610mmx510mm (24"x20") bowl size 545mmx445mmx200mm (211/2"x 17 1/2"x 8") depth 200 mm. Glossy. 1.0mm thk,
1
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 including cutting of stone and making good the walls wherever required : Kitchen sink with drain board with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete
a. Overall size 1040mmx510mm (41"x20") bowl size 460mmx410mmx200mm (18"x 16"x 8") depth 200 mm. Glossy. 1.0mm thk,
12
-
-
... More
Providing and fixing low flow rate C.P sink mixer with extended swinging spout, etc with complete accessories
1
-
-
... More
Providing and fixing low flow rate C.P sink cock with extended swinging spout, etc with complete accessories
12
-
-
... More
Providing and Fixing toilet paper holder C.P. Brass
88
-
-
... More
Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws Glass container
38
-
-
... More
Providing and fixing 300mm long SS Grab Bar as per approved makek etc. Complete.
24
-
-
... More
Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws 750 x 20 mm size
14
-
-
... More
Proving & installing robe/ coat hooks, with necessary fittings, bolts etc. & making good the finishes after provision of the same.
96
-
-
... More
Providing & fixing fully automatic "NO TOUCH" satin finish stainless steel AISI 316 grade wall mounted hand drier suitable to operate on 240 volts, single phase 50 hz, A.C. power supply, ( motor rating 100W, 2850 rpm automatic infrared sensing device, 1600W heating element approximate 275 cum/hr air flow wind velocity 15.5 m/sec or as per Manufacturer's specifications)
22
-
-
... More
Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz with inbuilt RO and nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with stainless steel body as per specification no. APWCR/WC
12
-
-
... More
Providing and fixing C.P. brass angle valve of approved quality conforming to IS:8931 (15mm nominal bore)
20
-
-
... More
Supplying and erecting storage type water heater 15 litres capacity having
standing loss 0.419 kWh / 24 hour / 45°C, high impact resistance
engineering plastic body with anti corrosive high grade steel inner tank
heating element having hard water & corrosion protection, with minimum
3 safety protections (i.e. thermostat & thermal cut-out, multi function
valve) with total pressure 8 bar withstanding capacity duly tested and marking sr.no. and date of erection complete.
1
-
-
... More
Providing & fixing 150 mm SS 304 ACO Kitchen drain chanel including SS 304 grating on top.
1
-
-
... More
Providing & fixing 600mm long flexible braided hose of approved quality
22
-
-
... More
Providing and fixing nahani trap of rigid PVC (approved make) for S.W.R. Pipes including lubricating etc. complete, without door : 110mm
106
-
-
... More
Providing and fixing nahani trap of rigid PVC (approved make) for S.W.R. Pipes including lubricating etc. complete, without door : 75mm
83
-
-
... More
Providing & fixing Stainless steel perforated grating over Nahani trap for wash basins, shower, sinks, etc, with all necessary cutting, filling, fixing & making good the services, etc,complete.
151
-
-
... More
Providing and fixing rigid PVC S.W. R. (soil, waste and rain water drainage pipes of approved make including lubricant etc. complete (single/double) socketed : 110mm dia
418
-
-
... More
Providing and fixing rigid PVC S.W. R. (soil, waste and rain water drainage pipes of approved make including lubricant etc. complete (single/double) socketed : 75mm dia
531
-
-
... More
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. 110mm
300
-
-
... More
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. 75mm
100
-
-
... More
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : 110mm
90
-
-
... More
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : 75 mm
60
-
-
... More
Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : 110mm
10
-
-
... More
Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door 110mm
100
-
-
... More
Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door 75mm
170
-
-
... More
Providing and fixing R.P.V.C. vent cowl: 110mm
10
-
-
... More
Providing and fixing R.P.V.C. vent cowl: 75mm
8
-
-
... More
Providing and fixing Upvc SWR pipes Type B for wash basin, Sink and Urinal drainage outlet laid in floor & sunk, chiseling in walls etc., with necessary cutting to the required length including short pieces Assorted fittings such as Plug/Plain Tee and bend single / double Y, Offsets, vent cowl etc. jointing with solvent and giving water tightness test for the pipes laid in the sunken/ceiling suspended portion with making holes in brick walls/floor grooving & redoing the same and provide brick & clamps support whenever required necessary etc. complete. 40mm
275
-
-
... More
Providing and fixing Upvc SWR pipes Type B for wash basin, Sink and Urinal drainage outlet laid in floor & sunk, chiseling in walls etc., with necessary cutting to the required length including short pieces Assorted fittings such as Plug/Plain Tee and bend single / double Y, Offsets, vent cowl etc. jointing with solvent and giving water tightness test for the pipes laid in the sunken/ceiling suspended portion with making holes in brick walls/floor grooving & redoing the same and provide brick & clamps support whenever required necessary etc. complete. 50mm
331.1
-
-
... More
Supplying at store or site of work including loading, unloading and stacking at site PVC (RING FIT) pipes with elastomeric sealing ring (one per pipe) and with rubber ring socket, conforming to to IS:4985-2000,and bearing ISI mark Class 6kg/sq.cm. Outer Dia in mm 75mm
193.6
-
-
... More
Supplying at store or site of work including loading, unloading and stacking at site PVC (RING FIT) pipes with elastomeric sealing ring (one per pipe) and with rubber ring socket, conforming to to IS:4985-2000,and bearing ISI mark Class 6kg/sq.cm. Outer Dia in mm 110mm
169.4
-
-
... More
Supplying at store or site of work including loading, unloading and stacking at site PVC (RING FIT) pipes with elastomeric sealing ring (one per pipe) and with rubber ring socket, conforming to to IS:4985-2000,and bearing ISI mark Class 6kg/sq.cm. Outer Dia in mm 160mm
473
-
-
... More
Construction of manhole rectangular in shape including cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) foundation thickness of concrete 20cms and offset 10cms on both sides and first class brick work with bricks class designation 100kg/sq.cm (wire cut bricks) cement mortar 1:3 (1 cement : 3 coarse sand) 23cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c / c in 20x 20x10cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished complete as per standard design. Inside size 0.60x0.60m and 0.60m deep (with medium duty DI manhole cover & frame of size 0.60x 0.60m weighing 90kgs ) including fixing with cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar.
25
-
-
... More
Construction of manhole rectangular in shape including cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) foundation thickness of concrete 20cms and offset 10cms on both sides and first class brick work with bricks class designation 100kg/sq.cm (wire cut bricks) cement mortar 1:3 (1 cement : 3 coarse sand) 23cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c / c in 20x 20x10cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished complete as per standard design.Inside size 0.90 x 0.60m and 1.00m deep ( with medium duty DI manhole cover & frame of size 0.90x 0.60m weighing 105 kgs including fixing with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar.)
20
-
-
... More
Extra/Additional depth of above square/ rectangular manholes at above item no.infractions with 100kg/sq.cm(wire cut bricks) brickwork in cement mortar 1:3 (1cement:3coarse sand) 23cm thick including providing and fixing CI footrests not weighing less than 5.30kgs incl. fixing in manholes @ 30cmc/c staggered in 20x20x10cm cement concrete blocks 1:3:6(1cement:3coarse sand :6graded stone aggregate 20mm nominal size) 12mm thick plaster inside and outside with cement mortar 1:3 (1cement :3coarse sand)including adding water proofing compound of approved brand with a floating coat of neat cement. 0.60 x 0.60m Manholes.
500
-
-
... More
Extra/Additional depth of above square/ rectangular manholes at above item no.infractions with 100kg/sq.cm(wire cut bricks) brickwork in cement mortar 1:3 (1cement:3coarse sand) 23cm thick including providing and fixing CI footrests not weighing less than 5.30kgs incl. fixing in manholes @ 30cmc/c staggered in 20x20x10cm cement concrete blocks 1:3:6(1cement:3coarse sand :6graded stone aggregate 20mm nominal size) 12mm thick plaster inside and outside with cement mortar 1:3 (1cement :3coarse sand)including adding water proofing compound of approved brand with a floating coat of neat cement. 0.90 x 0.60m Manholes
600
-
-
... More
Construction of manhole conical in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design. With 500 mm Dia heavy duty solid type C.I. circular cover and frame weighing not less then 230 kgs.0.9m dia a) 1.0 m deep
1
-
-
... More
Construction of manhole conical in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design. With 500 mm Dia heavy duty solid type C.I. circular cover and frame weighing not less then 230 kgs.0.9m dia b) 1.5 m deep
15
-
-
... More
Construction of manhole conical in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design. With 500 mm Dia heavy duty solid type C.I. circular cover and frame weighing not less then 230 kgs.0.9m dia a) 1.5 m deep
1
-
-
... More
Construction of manhole conical in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design. With 500 mm Dia heavy duty solid type C.I. circular cover and frame weighing not less then 230 kgs.0.9m dia b)2.0 m deep
1
-
-
... More
Construction of manhole conical in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design. With 500 mm Dia heavy duty solid type C.I. circular cover and frame weighing not less then 230 kgs.0.9m dia c) 2.5 m deep
1
-
-
... More
Add extra for conical brick masonry manhole for fractional depth of each one centimeter or part thereof for 0.9m manhole
250
-
-
... More
Providing and fixing square mouth S.W. gully trap grade 'A" complete with C.I. Grading brick masonry chamber and water light C.I. cover with frame 300x300mm size (inside) the weight of the cover to be not less than 4.53kg and frame to be not less than 2.72kg as per standard design. b) 150 x 100 mm size P or S type
12
-
-
... More
Providing and fixing C.I. foot rest having minimum weight 5.3 kgs in manhole with 20x20x10cm cement concrete blocks 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) as per standard design.
100
-
-
... More
Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete.I)NP2 Class150
55
-
-
... More
Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete.I)NP2 Class 200
165
-
-
... More
Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete.I)NP2 Class 250
11
-
-
... More
Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete.I)NP2 Class 300
11
-
-
... More
Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete.I)NP2 Class 450
11
-
-
... More
Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete.I)NP2 Class 600
550
-
-
... More
Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non-pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete.150
55
-
-
... More
Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non-pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete.250
165
-
-
... More
Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non-pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete.300
11
-
-
... More
Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non-pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete.450
11
-
-
... More
Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non-pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete. 600
550
-
-
... More
Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 600mm, with both ends threaded 65mm 40 mm dia.
1
-
-
... More
Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 600mm, with both ends threaded 65mm 50mm dia.
25
-
-
... More
Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 600mm, with both ends threaded 65mm 65 mm dia.
5
-
-
... More
Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 600mm, with both ends threaded 65mm 80 mm dia.
10
-
-
... More
Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 600mm, with both ends threaded 65mm 100 mm dia.
21
-
-
... More
Providing & Fixing in position G.I. Pipe puddle flange inserts of 4mm thick as per drg. Appx length of insert is 600mm, with both ends threaded 65mm 150 mm dia.
3
-
-
... More
Supplying and fixing air tight FRP cover (LD) with frame of size 900 x 600 mm for manholes opening of water tanks including required accessories & materials etc. complate as per direction of engineer in charge.
15
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.
(All Domestic & flushing water supply lines in duct & terrace loop by gravity & toilet internal concealed piping above 50mm dia) SCH -40 ( blue/white) Outer Dia in mm 20
243.8
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.
(All Domestic & flushing water supply lines in duct & terrace loop by gravity & toilet internal concealed piping above 50mm dia) SCH -40 ( blue/white) Outer Dia in mm 25
15
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.
(All Domestic & flushing water supply lines in duct & terrace loop by gravity & toilet internal concealed piping above 50mm dia) SCH -40 ( blue/white) Outer Dia in mm 32
15
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.
(All Domestic & flushing water supply lines in duct & terrace loop by gravity & toilet internal concealed piping above 50mm dia) SCH -40 ( blue/white) Outer Dia in mm 40
121
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.
(All Domestic & flushing water supply lines in duct & terrace loop by gravity & toilet internal concealed piping above 50mm dia) SCH -40 ( blue/white) Outer Dia in mm 50
133.1
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.
(All Domestic & flushing water supply lines in duct & terrace loop by gravity & toilet internal concealed piping above 50mm dia) SCH -40 ( blue/white) Outer Dia in mm 63
71.5
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.
(All Domestic & flushing water supply lines in duct & terrace loop by gravity & toilet internal concealed piping above 50mm dia) SCH -40 ( blue/white) Outer Dia in mm 75
220
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.
(All Domestic & flushing water supply lines in duct & terrace loop by gravity & toilet internal concealed piping above 50mm dia) SCH -40 ( blue/white) Outer Dia in mm 90
1
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work.
(All Domestic & flushing water supply lines in duct & terrace loop by gravity & toilet internal concealed piping above 50mm dia) SCH -40 ( blue/white) Outer Dia in mm 110
286
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. (All Domestic & flushing pressurised water supply lines, including UGR to OHT risers in shaft) SCH – 80 ( blue/white) Outer Dia in mm20
1
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. (All Domestic & flushing pressurised water supply lines, including UGR to OHT risers in shaft) SCH – 80 ( blue/white) Outer Dia in mm 25
1
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. (All Domestic & flushing pressurised water supply lines, including UGR to OHT risers in shaft) SCH – 80 ( blue/white) Outer Dia in mm 32
5.5
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. (All Domestic & flushing pressurised water supply lines, including UGR to OHT risers in shaft) SCH – 80 ( blue/white) Outer Dia in mm 40
5
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. (All Domestic & flushing pressurised water supply lines, including UGR to OHT risers in shaft) SCH – 80 ( blue/white) Outer Dia in mm 50
121
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. (All Domestic & flushing pressurised water supply lines, including UGR to OHT risers in shaft) SCH – 80 ( blue/white) Outer Dia in mm63
121
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. (All Domestic & flushing pressurised water supply lines, including UGR to OHT risers in shaft) SCH – 80 ( blue/white) Outer Dia in mm 75
11
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. (All Domestic & flushing pressurised water supply lines, including UGR to OHT risers in shaft) SCH – 80 ( blue/white) Outer Dia in mm 90
1
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. (All Domestic & flushing pressurised water supply lines, including UGR to OHT risers in shaft) SCH – 80 ( blue/white) Outer Dia in mm110
1
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). (All concealed Domestic & flushing & hot toilet internal water supply & internal drainage) 15 mm outer dia CPVC pipe
481.8
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). (All concealed Domestic & flushing & hot toilet internal water supply & internal drainage) 20 mm outer dia CPVC pipe
78.1
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). (All concealed Domestic & flushing & hot toilet internal water supply & internal drainage) 25 mm outer dia CPVC pipe
128.7
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). (All concealed Domestic & flushing & hot toilet internal water supply & internal drainage) 32 mm outer dia CPVC pipe
74.25
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). (All concealed Domestic & flushing & hot toilet internal water supply & internal drainage) 40 mm outer dia CPVC pipe
273.9
-
-
... More
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). (All concealed Domestic & flushing & hot toilet internal water supply & internal drainage) 50 mm outer dia CPVC pipe
75.9
-
-
... More
Providing, fixing, jointing and testing in position CPVC (Chlorinated Poly Vinyl Chloride) water supply pipes with pipe as per CTS SDR 11 (operating pressure - 7 Bar @ 82 Deg C and 28 Bar @ 23 Deg C)for pipes from 1/2 Inch to 2 Inch. Schedule 80 Pipes to be used from 2-1/2 Inch to 6 Inch. Pipes shall be joined using solvent welded CPVC fittings i.e. Tees, Elbows, Couplers, Unions, Reducers, brushings etc. including transition fittings (connection between CPVC & metal pipe/GI) i.e. Brass Adaptors (both Male & Female threaded) conforming to ASTM D-2846. ASTM F441 with only CPVC solvent cement conforming to ASTM F-493. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings. (Concealed work, including cutting chases and making good the walls etc.)
Cost shall be inclusive of (a)Making maximum of 7.5 x 7.5 cm chase in wall and floors for the pipe, making good the same by using 1:2 cement mortar over the wire mesh complete as required.Galvanized clamps and brackets, shall be included in the price .all pipe will be colour codded with flow direction as per NBC 2016 guide lines.: 65mm Dia
48.4
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer. External work. (Underground pressurised water supply line) SCH-80(blue)/(white) 40mm outer dia.
1
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer. External work. (Underground pressurised water supply line) SCH-80(blue)/(white) 50mm outer dia.
250
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer. External work. (Underground pressurised water supply line) SCH-80(blue)/(white) 63mm outer dia.
75
-
-
... More
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer. External work. (Underground pressurised water supply line) SCH-80(blue)/(white) 75mm outer dia.
1
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.) 15mm nominal bore
36
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.) 20 mm nominal bore
1
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.) 25 mm nominal bore
1
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.) 32 mm nominal bore
1
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.) 40 mm nominal bore .
36
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.) 50 mm nominal bore .
29
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.) 65 mm nominal bore .
58
-
-
... More
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.) 80 mm nominal bore .
5
-
-
... More
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Butterfly (tight shut off) valve with cast iron body conforming IS:210 FIG. 260 and disc shafts seal rings, clamping ring, nitrite rubber seal leaded bronze bearings manually operated complete conforming to BS:5155/IS:13095 etc. complete. TYPE P.N. 1.0 (Class B ) 100 mm Dia
2
-
-
... More
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Butterfly (tight shut off) valve with cast iron body conforming IS:210 FIG. 260 and disc shafts seal rings, clamping ring, nitrite rubber seal leaded bronze bearings manually operated complete conforming to BS:5155/IS:13095 etc. complete. TYPE P.N. 1.0 (Class B ) 150mm Dia
1
-
-
... More
Providing and fixing non-return valve of approved quality : 25 mm nominal bore
1
-
-
... More
Providing and fixing non-return valve of approved quality : 32 mm nominal bore
1
-
-
... More
Providing and fixing non-return valve of approved quality : 40 mm nominal bore
1
-
-
... More
Providing and fixing non-return valve of approved quality : 50 mm nominal bore
1
-
-
... More
Providing and fixing non-return valve of approved quality : 65mm nominal bore
2
-
-
... More
Providing and fixing non-return valve of approved quality : 80 mm nominal bore
1
-
-
... More
Providing and fixing Non Return Valve for cold water supply The valve assembaly is tested to a pressure not less than 10 Kg/Sq.cm and suitable to reduce the pressure upto 2 Kg/Sq.cm) Including necessary pipe & fittings; i.e. flanges/ unions, nuts, bolts and washers complete as required.pipe /valve will be clour codded with flow direction as per NBC 2016 guide lines. (appropriate tagging should be done for all valves) 100mm
1
-
-
... More
Providing and fixing Non Return Valve for cold water supply The valve assembaly is tested to a pressure not less than 10 Kg/Sq.cm and suitable to reduce the pressure upto 2 Kg/Sq.cm) Including necessary pipe & fittings; i.e. flanges/ unions, nuts, bolts and washers complete as required.pipe /valve will be clour codded with flow direction as per NBC 2016 guide lines. (appropriate tagging should be done for all valves) 150mm
1
-
-
... More
Supply of inferential, dry dial, type Domestic Water Meter, suitable for horizontal installation, duly, sealed against tampering with couplings at both ends having pulse output facility compatible for the automatic reading system, conforming to IS:779-1974 and ISO 4064-2005 standards and bearing EEC/MID/OIML mark, (with latest Amendments) along with test certificate from FCRI/NABL as desired by the department.
A.Class B-Multi Jet Water meters
Dia in mm-50mm
1
-
-
... More
Fixing water meter & stop cock in G. I. Pipe line including cutting & treading the pipe and making long screw etc. complete (cost of water meter and stop cock to be paid separately)
1
-
-
... More
Providing and fixing C.I. Strainers for Water Meters including cost of all materials and labour.C.I. Strainer 'Y' type with screwed ends. Sizes in mm 40
1
-
-
... More
C.I. Stainer 'T' (Basket) type with flanged ends and with stainless steel or Brass mesh with opening of 2.5mm to 3mm and suitable for operating pressure of 16 kg/cm² and test pressure of 24 kg/cm² C.I. Strainer 'T' (Basket) Ttpe with flanged ends Sizes in mm 50mm
1
-
-
... More
C.I. Stainer 'T' (Basket) type with flanged ends and with stainless steel or Brass mesh with opening of 2.5mm to 3mm and suitable for operating pressure of 16 kg/cm² and test pressure of 24 kg/cm² C.I. Strainer 'T' (Basket) Ttpe with flanged ends Sizes in mm 80mm
1
-
-
... More
Providing and fixing ball valve ( brass ) of approved quality : High pressure with PVC float 25 mm nominal bore
2
-
-
... More
Supplying and erecting 40mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (openarea Ratio) for positive suction complete as per specification
1
-
-
... More
Supplying and erecting 50mm dia Cast Iron end line strainer of Y typeflanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (openarea Ratio) for positive suction complete as per specification
3
-
-
... More
Supplying and erecting 65mm dia Cast Iron end line strainer of Y typeflanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (openarea Ratio) for positive suction complete as per specification
4
-
-
... More
Supplying and erecting 80mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (openarea Ratio) for positive suction complete as per specification
5
-
-
... More
Supplying and erecting 100mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (openarea Ratio) for positive suction complete as per specification
4
-
-
... More
Supplying and erecting 150mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (openarea Ratio) for positive suction complete as per specification
2
-
-
... More
Supply, Installation, Testing & commissioning of Air release valve with filter & ball valve for water supply risers, suitable for pressure of 10 Kg/Sq.cm. including flanges / union, nuts, bolts, washer etc., complete. Pasting radium Colour band near Valve, Colour text, flow direction arrow on pipe line as per ISO standared. (appropriate tagging should be done for all valves)
25
-
-
... More
Providing, lowering & laying including supply of materials and labour for SN4/SN8 Rigid PVC pipes of approved make, with necessary cutting to the required length including short pieces with assorted fittings etc. jointing with solvent and giving water tightness test for the pipes laid with making holes in brick walls/floor grooving & redoing the same and brick support whenever required necessary etc. complete. All the pipes which will be laid in soil / filling shall be properly supported at all joints, change in dia, direction.etc. works to be executed as per IS complete as per the direction of project engineer. 110 mm dia. (SN8)
1.1
-
-
... More
Providing, lowering & laying including supply of materials and labour for SN4/SN8 Rigid PVC pipes of approved make, with necessary cutting to the required length including short pieces with assorted fittings etc. jointing with solvent and giving water tightness test for the pipes laid with making holes in brick walls/floor grooving & redoing the same and brick support whenever required necessary etc. complete. All the pipes which will be laid in soil / filling shall be properly supported at all joints, change in dia, direction.etc. works to be executed as per IS complete as per the direction of project engineer. 150 mm dia. (SN4)
110
-
-
... More
Providing, lowering & laying including supply of materials and labour for SN4/SN8 Rigid PVC pipes of approved make, with necessary cutting to the required length including short pieces with assorted fittings etc. jointing with solvent and giving water tightness test for the pipes laid with making holes in brick walls/floor grooving & redoing the same and brick support whenever required necessary etc. complete. All the pipes which will be laid in soil / filling shall be properly supported at all joints, change in dia, direction.etc. works to be executed as per IS complete as per the direction of project engineer. 200 mm dia. (SN4)
220
-
-
... More
Providing, lowering & laying including supply of materials and labour for SN4/SN8 Rigid PVC pipes of approved make, with necessary cutting to the required length including short pieces with assorted fittings etc. jointing with solvent and giving water tightness test for the pipes laid with making holes in brick walls/floor grooving & redoing the same and brick support whenever required necessary etc. complete. All the pipes which will be laid in soil / filling shall be properly supported at all joints, change in dia, direction.etc. works to be executed as per IS complete as per the direction of project engineer. 250 mm dia (SN4)
1.1
-
-
... More
Supply, installation, testing, commissioning of 4.6cum/hr capacity water softner plant which includes OBR 46 KLD considering 10 hrs of working ,Regeneration frequncy once in a day, raw water pump (1w +1s) flow rate 4.6 cum/hr @head 350.0m ,M.S.Dual Medai filter with media sand,supporting pebbles & anthresite pressure operating pressure 2.5 kg/cm2,M.S.Softner Unit GIVING 150 obr, automation deatails in which plant will strat on low level in treated water tank and will stop on high level in treated water tank. (process prarameter may change according to water test report)
1
-
-
... More
Supplying & Fixing Prefabricated Sewage Treatment plant of 95 kld with opearting 24 hours of operating,with preatrement which includes screening,oil & grease trap,equliasation tank,secondary treatment which inlides bilogical treatment ,tube settler & disinfecation and sludge disposal sytem,Tertiary treatment as water paased thrugh series of filters, Perforated screen in MS epoxy construction Oil & grease trap chamber Equalisation tank Anoxic Tank MBBR reactors Tube Settler Clear water tank/filter feed tank Treated water tank Sludge holding tank Sewage transfer pumps – Self priming, non clog, centrifugal Air blower with motor, diffuser membrane & associated equipments Tube media for Tube settler Poly dosing system Chlorine dosing system Filter f eed pump Pressure sand filter Activated Carbon filter Interconnecting pipe & fitting, valves Sludge pump Electrical panel & equipment Ozonation & UV Note -1.Stp to treated water tank parameters should meet enviroment standards.
2.STP Vendor need to take all statutaory approval regarding enviromental clerance.
3.STP vendor need to quote for all electromechanical equipment. Contractor have to submit shop drawing before to execution. This cost is excluding all civil works.
1
-
-
... More
Terrace BoosterSystem Supply, Installation, Testing And Commissioning Of Compact Self Contained Skid Mounted Hydropneumatic System As Follows: In-Line, Multisage, centrifugal pumps with SS-304 casing and impeller and SS-316 shaft, CI base & head TEFC motor (with mechanical seal) (Vendor to submit performance curves and technical catalog of the proposed model for review & information) The pump shall be selected for performance at best efficiency point. However, the pump selection shall be suitable for performance with set point @ + 20% of the rated head. Nos. of Pumps :4 ( 1W+1S) Water Flow Rate : 5 LPS each Head : 15 M External Pump mounted or wall mounted microprocessor PID controller and frequency inverter integrated in a single body or as separate components with pressure sensor transmitter minimum two lined LCD display, diodes to indicate pump ready, pump running and fault and capable to communicate with other controllers following MODBUS-RTU or BACNET Class-2 protocall through RS485 port. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. System should be equiped with dry running protection Quantity : 1 - Nos. Complete (Skid mounted wall mounted / floor mounted) electrical control panel comprising of all accessories such as PLCs, pressure switches, pressure transducers, control wiring and any other necessary imports etc. (list to be provided by the vendor) Precharged diaphram pressure vessel with food grade membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc complete. Set of accessories such as pressure switches, pressure transducers, inter connecting power and control cabling etc. Complete Accessories like Strianer,NRVs, isolating valves, SS-304 (non-Magnetic) suction and delivery header, pressure gauge, MS base frame (Synthetic enamel painted over a coat of primer) Hydropneumatic System as described above
1
-
-
... More
Supplying, installing, testing and commissioning of Transfer Pump SS vertical / horizontal multistage centrifugal pump. Each pump shall have TEFC 1450 / 2900 RPM three phase electric motor. The pump shall have cast iron head, base plate SS Shaft/ Impeller/ Intermediate chamber. Pump shall be provided with mechanical seal. The pump shall be suitable for auto/ manual operation.(Transfer pump from STP Flushing tank TO OHT & Located in STP pump room) The pump shall be selected for performance at best efficiency point. However, the pump selection shall be suitable for performance with set point @ + 20% of the rated head. Nos. of Pumps : 2 ( 1W+1S) Water Flow Rate : 4 LPS each Head : 43 M All pumps need to run on fix speed system Complete (Skid mounted wall mounted / floor mounted) electrical control panel comprising of all accessories such as PLCs, pressure switches, pressure transducers, control wiring and any other necessary imports etc. (list to be provided by the vendor) Precharged diaphram pressure vessel with food grade membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc complete. Level Controller comprising of Level Switches, Float Switch, Solenoid Valve, Solenoid Valve Panel, Cables etc. Set of accessories such as pressure switches, pressure transducers, inter connecting power and control cabling etc. Complete Accessories like Strainer ,NRVs, isolating valves, SS-304 (non-Magnetic) suction and delivery header, pressure gauge, MS base frame (Synthetic enamel painted over a coat of primer)
1
-
-
... More
Supplying, installing, testing and commissioning of Transfer Pump SS vertical / horizontal multistage centrifugal pump. Each pump shall have TEFC 1450 / 2900 RPM three phase electric motor. The pump shall have cast iron head, base plate SS Shaft/ Impeller/ Intermediate chamber. Pump shall be provided with mechanical seal. The pump shall be suitable for auto/ manual operation.(Transfer pump from UGR Domestic tank TO OHT & Located in UGR pump room) The pump shall be selected for performance at best efficiency point. However, the pump selection shall be suitable for performance with set point @ + 20% of the rated head. Nos. of Pumps : 2 ( 1W+1S) Water Flow Rate : =2.5LPS each Head : 43 M All pumps need to run on fix speed system Complete (Skid mounted wall mounted / floor mounted) electrical control panel comprising of all accessories such as PLCs, pressure switches, pressure transducers, control wiring and any other necessary imports etc. (list to be provided by the vendor) Precharged diaphram pressure vessel with food grade membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc complete. Level Controller comprising of Level Switches, Float Switch, Solenoid Valve, Solenoid Valve Panel, Cables etc. Set of accessories such as pressure switches, pressure transducers, inter connecting power and control cabling etc. Complete Accessories like Strainer ,NRVs, isolating valves, SS-304 (non-Magnetic) suction and delivery header, pressure gauge, MS base frame (Synthetic enamel painted over a coat of primer
1
-
-
... More
Supply, installation, testing and commissioning of continuous duty submersible centrifugal non-clogging drainage pumps complete with 3 phase motor with all necessary protection and mechanical seal etc. Vendor to submit proposed pump model with duty curve. (for basement storm sump & ugr sump pump) Flow rate : 5 LPS ( 1W+1S) Head : 15_Mts Solid Handling : 20 MM Location : underground pump room Purpose : dewatering sump MOC : CI body / impeller & shaft Cost to be inclusive of ready made electro – galvanized MS lifting chain, class C GI pipe header complete with discharge manifold, flanges, tee, elbow etc. complete including GI pipe upto the top of sump and including GI union. The installation shall be complete with all necessary indigenous accessories as required to complete the installation. Level Controller comprising of Level Switches, Float Switch, Solenoid Valve, Solenoid Valve Panel, Cables etc.
2
-
-
... More
Providing, Fixing, Testing & Commissioning of Spray Pou-up Sprinkler,nozzles,hose, piping, valves, pumps for 8000 sq.m. landscape area including all required necessary fittings, labours all taxes if any etc. (item shall include all required irrigation plumbing work material & labour cost)
1
-
-
... More
Providing, Fixing, Testing & Commissioning recirculation pump, valves and piping, filter for water body (shown in landscape drawing) including all required necessary fittings, labours all taxes if any etc. (item shall include all required work material & labour cost)
1
-
-
... More
Supplying, installing and commissioning automatic organic waste composting machine for 330KG/day and including all required accessories
1
-
-
... More
Providing & fixing Stainless steel plain grating over Nahani trap for urinals with all necessary cutting, filling, fixing & making good the services, etc,complete. Plain cover for urinals - Top grating size in mm - 100 x 100
26
-
-
... More
Supply, Installation, Testing & commissioning of S.S.Vertical grating around at the entrance of RWP on terrace with all necessary fittings, making proper connection with cement solvent joints, cutting chase / hole in wall and bringing the same in proper condition and shape after placing the grating in right position complete as required. with material and labour etc. completeas per the direction of project engineer. 110mm
1
-
-
... More
Supply, Installation, Testing & commissioning of S.S.Vertical grating around at the entrance of RWP on terrace with all necessary fittings, making proper connection with cement solvent joints, cutting chase / hole in wall and bringing the same in proper condition and shape after placing the grating in right position complete as required. with material and labour etc. completeas per the direction of project engineer. 160mm
15
-
-
... More
Providing and fixing factory made precast RCC perforated drain covers with frame, having concrete of strength not less than M-25, including providing perforations, complete, all as per direction of Engineerin- charge Size1000 x 300x50 mm
1180
-
-
... More
Providing and fixing factory made precast RCC perforated drain covers with frame, having concrete of strength not less than M-25, including providing perforations, complete, all as per direction of Engineerin- charge Size1000 x 450x50 mm
330
-
-
... More
Earthwork in excavation in foundation pipeline trenches, drain in saturated soil upto a depth of 0.6m lift upto 1.5 m including shoring strutting, pumping/ bailing out water ,stacking the excavated soil not more than 5m clear from the edge of the excavation and returning the stacked soil in 0.15 m layers when required into plinth sides of foundation, etc. consolidating each deposited layer by ramming and watering and disposing of all surplus excavated soil within a lead upto 20 m.
1159.5
-
-
... More
Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.
930
-
-
... More
Supplying, installation, testing & commissioning drain channel 150mm wide (30mm thick) for entrance, channel with suitable grating in flooring, pipe connection to nearestchamber including required accessories & consumables etc. complete as direction of engineer in charge. manufacturer guidelines to be reffered for installation process.
50
-
-
... More
INTERIOR WORKS
-
-
-
... More
OFFICE TABLE (T1)
(TABLE SIZE: 1800mm(L) X 750mm(D) X 750mm(HT) SIDE TABLE SIZE : 900mm(L) X 450(D) X 700(HT) (T1) Supplying & installing in position main table of approved make, colour & size with top made up of 25mm thick exterior grade prelaminated particle board with 2mm thick PVC edge banding on all sides & supported on Gable ends/sides made out of 25mm thick prelaminated particle board & Modesty panels in 18mm thick prelaminated particle board.Gable ends & modesty panel exposed edges shall be finished in 2mm thick PVC edge banding & sealed edges shall be in 0.8mm thick PVC edge banding. Wire routing/ wire management shall be provided on main table or side table as specified. Table shall have independent Mild steel powder coated CPU trolley, wire manager & MS powder coated key board tray of standard size. The keyboard tray shall accommodate mouse pad. The side table of approved size shall have top made up 25mm thick exterior grade prelaminated particle board top with 2mm PVC edge banding & supported with storage cabinet below in 18mm thick prelaminated particle board, back sheet of 9mm thick prelaminated particle board & skirting of 75mm height. Cabinet shall have two equal size shutters in 18mm thick prelaminated particle board with 2mm thick PVC edge banding & fixed with S.S. brush finish brass hinges & shall be provided with full length aluminium G profile handles /4'' S.S.304 grade brush finish handles, premium lock, & one shelf in centre fixed on shelf button. The pedestal unit of size 350mm(L)X450mm(W)X550mm(H) shall have top made up of 25 mm thick prelaminated particle board & sides in 18 mm thick prelaminated particle board and 75 mm height skirting with 2mm thick PVC edge banding on exposed edges 0.8 mm thick PVC edge banding on sealed edges. The pedestal shall have three equal size drawers with front fascia having central locking system & full length aluminium G profile handles/ 4"SS 304 grade brush finish handles ,roller slide mechanism and casters for added mobility. All exposed edges shall have 2mm thick PVC edge banding and sealed edges shall have 0.8mm thick PVC edge banding. All material shall be of approved make. Modular furniture shall confirm to BIFMA & FIRA standards. All works complete as per the drawing / Image, technical specification and direction of the Engineer . (Refer drawing number - UM-IN-201 to UM-IN-205)
2
-
-
... More
4 SEATER SQUARE TABLES (TABLE SIZE: 900mm(L) X 900mm(D) X 750mm(HT) (T2) BUSSINESS LOUNGE & C.O.E TABLES (T2,T3,T4,T5) Supplying and installing in position lounge table of approved make, colour and size made up of 19mm thick Marine BWP (boiling water proof) plywood and finished in 10mm thk 100% acrylic UV grade solid surfacee. The understructure shall be made up of PVD coated stainless steel 304 grade base/ vertical supports as per design. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205)
4
-
-
... More
5 SEATER ROUND TABLES (TABLE SIZE: 1200mm(dia) X 900mm(D) X 750mm(HT) (T3) BUSSINESS LOUNGE & C.O.E TABLES (T2,T3,T4,T5) Supplying and installing in position lounge table of approved make, colour and size made up of 19mm thick Marine BWP (boiling water proof) plywood and finished in 10mm thk 100% acrylic UV grade solid surfacee. The understructure shall be made up of PVD coated stainless steel 304 grade base/ vertical supports as per design. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205)
3
-
-
... More
CENTER TABLES
(TABLE SIZE: 900mm(L)/900mm(dia) X 900mm(D) X 600mm(HT) (T4) BUSSINESS LOUNGE & C.O.E TABLES (T2,T3,T4,T5) Supplying and installing in position lounge table of approved make, colour and size made up of 19mm thick Marine BWP (boiling water proof) plywood and finished in 10mm thk 100% acrylic UV grade solid surfacee. The understructure shall be made up of PVD coated stainless steel 304 grade base/ vertical supports as per design. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205)
13
-
-
... More
CORNER TABLES
TABLE SIZE: 600mm(L)/600mm(dia) X 600mm(D) X 450mm(HT) (T5) BUSSINESS LOUNGE & C.O.E TABLES (T2,T3,T4,T5) Supplying and installing in position lounge table of approved make, colour and size made up of 19mm thick Marine BWP (boiling water proof) plywood and finished in 10mm thk 100% acrylic UV grade solid surfacee. The understructure shall be made up of PVD coated stainless steel 304 grade base/ vertical supports as per design. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205)
17
-
-
... More
CORNER TABLE ( IN ADMIN ) (TABLE SIZE: 600mm(L) X 600mm(D) X 450mm(HT) (T6) Providing & installing in position square wooden centre table made of teak wood and having wooden legs and horizontal frame as per design. The table shall include necessary hardware fittings, fixtures etc. The table shall be finished with 3 coats of melamine polish of approved colour. All material shall be of approved make. All works complete as per the drawing/ Image,technical specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205)
1
-
-
... More
SQUARE TABLES - 4 SEATER
(TABLE SIZE:900mm(L) X 900mm(D) X 750mm(HT) (T7) FOOD COURT TABLES Supplying & installing in position cafetaria tables with table top made up of particle board conforming to IS:12823 interior grade with prelaminated finish. Top shall be 25mm thick with 2mm PVC edge banding with enhanced scratch resistance with understructure of Mild steel powder coated sections of 2 mm thick as per approved design.Understructure shall be fitted to top by stainless steel machine screws. The table shall have a plastic glide fixed at the understructure to prevent the damage of table while stacking complete with all hardwares accessories. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205)
11
-
-
... More
RECTANGLE TABLES - 4 SEATER
(TABLE SIZE:1200mm(L) X 750mm(D) X 750mm(HT) (T8) FOOD COURT TABLES Supplying & installing in position cafetaria tables with table top made up of particle board conforming to IS:12823 interior grade with prelaminated finish. Top shall be 25mm thick with 2mm PVC edge banding with enhanced scratch resistance with understructure of Mild steel powder coated sections of 2 mm thick as per approved design.Understructure shall be fitted to top by stainless steel machine screws. The table shall have a plastic glide fixed at the understructure to prevent the damage of table while stacking complete with all hardwares accessories. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205)
30
-
-
... More
RECTANGLE TABLES - 6 SEATER (TABLE SIZE:1800mm(L) X 750mm(D) X 750mm(HT) (T9) FOOD COURT TABLES Supplying & installing in position cafetaria tables with table top made up of particle board conforming to IS:12823 interior grade with prelaminated finish. Top shall be 25mm thick with 2mm PVC edge banding with enhanced scratch resistance with understructure of Mild steel powder coated sections of 2 mm thick as per approved design.Understructure shall be fitted to top by stainless steel machine screws. The table shall have a plastic glide fixed at the understructure to prevent the damage of table while stacking complete with all hardwares accessories. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205)
5
-
-
... More
MEETING TABLE (TABLE SIZE: 1200MM(DIA) X 750MM(HT) (T10) Supplying and installing in position meeting table of approved make, colour and size with top made up of 25 mm thick exterior grade particle board having pre-lamination/ post -lamination with post forming along edges. The understructure shall be made up of stainless steel 304 grade base plate & a vertical support in stainless steel 304 grade round tube of 90mm diameter.The base shall be circular at the bottom and top. The top base shall have required holes for fixing table top to it. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205)
1
-
-
... More
BACK STORAGE UNIT (BS1)
(SIZE: 2700mm(L)X 450mm(D) X 750mm(HT) BACK STORAGE UNIT - (BS1, BS2) Supplying and installing in position back storage of approved make, colour and size with top made up of 25 mm thick exterior pre laminated particle board & having storage body made up of 18mm thick exterior grade pre laminated particle board, back of the unit made up of 9 mm thick exterior particle board with 75 mm height skirting. All the exposed edges are in 2 mm thick PVC (Polyvinyl Chloride) edge banding & sealed edges are in 0.8 mm thick PVC (Polyvinyl Chloride) edge banding. Equal size shutters (upto 500 mm wide) fixed with stainless steel brush finish brass hinges of 38 mm, handles , premium lock to be provided and one shelf in centre fixed on shelf button. Both made up of 18 mm thick pre laminated particle board with 2 mm thick PVC (Polyvinyl Chloride) edge banding on exposed sides & sealed edges in 0.8mm thick PVC (Polyvinyl Chloride) edge banding sizes shall be cross checked on site as per site measurements at the time of execution.All material shall be of approved make.All complete as per the drawing / Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205)
1
-
-
... More
BACK STORAGE UNIT (BS2)
(SIZE: 1900mm(L)X 450mm(D) X 750mm(HT) BACK STORAGE UNIT - (BS1, BS2) Supplying and installing in position back storage of approved make, colour and size with top made up of 25 mm thick exterior pre laminated particle board & having storage body made up of 18mm thick exterior grade pre laminated particle board, back of the unit made up of 9 mm thick exterior particle board with 75 mm height skirting. All the exposed edges are in 2 mm thick PVC (Polyvinyl Chloride) edge banding & sealed edges are in 0.8 mm thick PVC (Polyvinyl Chloride) edge banding. Equal size shutters (upto 500 mm wide) fixed with stainless steel brush finish brass hinges of 38 mm, handles , premium lock to be provided and one shelf in centre fixed on shelf button. Both made up of 18 mm thick pre laminated particle board with 2 mm thick PVC (Polyvinyl Chloride) edge banding on exposed sides & sealed edges in 0.8mm thick PVC (Polyvinyl Chloride) edge banding sizes shall be cross checked on site as per site measurements at the time of execution.All material shall be of approved make.All complete as per the drawing / Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205)
1
-
-
... More
STORAGE UNIT (SU1)
(SIZE: 900mm(L)X 450mm(D) X 750mm(HT) Supplying and installing in position storage unit of approved make, colour and size with top made up of 25 mm thick exterior pre laminated particle board & having storage body made up of 18mm thick exterior grade pre laminated particle board, back of the unit made up of 9 mm thick exterior particle board with 75 mm height skirting. All the exposed edges are in 2 mm thick PVC (Polyvinyl Chloride) edge banding & sealed edges are in 0.8 mm thick PVC (Polyvinyl Chloride) edge banding. Equal size shutters (upto 500 mm wide) fixed with stainless steel brush finish brass hinges of 38 mm, handles , premium lock to be provided and one shelf in centre fixed on shelf button. Both made up of 18 mm thick pre laminated particle board with 2 mm thick PVC (Polyvinyl Chloride) edge banding on exposed sides & sealed edges in 0.8mm thick PVC (Polyvinyl Chloride) edge banding sizes shall be cross checked on site as per site measurements at the time of execution.All material shall be of approved make.All complete as per the drawing / Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205
7
-
-
... More
METAL STORAGE CABINET (MSU1)
(SIZE: 900mm(L)X 500mm(D) X 1950mm(HT) Supplying and installing in position Metal storage cabinet of size 900 mm (W) x 507 mm (D) x 1950 mm (H) made of Prime Quality CRCA Steel with panels from 0.6 mm thick CRCA Steel and front frame and shelf made from 0.8mm thick CRCA Steel. The cabinet shall be provided with Full height Steel Hinged Door with Handle & Base flush with door made from zink alloy and skirting of 75 mm height. Cam Lock which shall be having 3 way locking 90 degree removable key type mechanism. 4 numbers of full height Adjustable Shelves. The cabinet shall be finished with 50 Microns (+/-10) thick Epoxy Powder coating. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205)
2
-
-
... More
SINGLE SIDED SLOTTED ANGLE METAL RACK (MR1) (SIZE:900mm(L)X 450mm(D) X 1850mm(HT) Supplying and Installing in position of Single sided slotted angle metal rack made up of Slotted Angles: of size 40mm X 40mm X 2mm thickness and shelves of size 900mm X 400mm X 1.2 mm thick, Machine Multi-band Moulded to withstand load of 75-100 kg per shelf. The Grade of Steel shall be CRCA Sheet Steel of approved make. The painting shall be a 7 tank process with oven baking. Corner Plates of size 81mm X 81mm X 1.2mm shall be provided. Nut & Bolts shall be MS Chrome/ Galvanised with minimum 30 microns. The Inter connections/ Cross supports shall be in 40mm X 40mm X 2mm thick angles with lap joint. The products must be complying to IS: 513 & IS: 1079. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205)
4
-
-
... More
LOCKERS (3 unit locker module , each having 6 doors) Size 1200MM (L)x 450MM(D)x 1830MM(H) (LU1) Supplying and Installing in position of 3 units locker modules of size having 6 compartments with Doors in each unit made out of CRCA (Cold rolled close annealed) Sheet not less than 0.8mm thick for Carcass & Shelves. Skirting to be done with 1.2mm thick CRCA (Cold rolled close annealed) Sheet. Storage Top to be made out of 2mm thick CRCA (Cold rolled close annealed) Sheet and Shelves with Stiffener to have an overall thickness not less than 15mm.The shelves should have a load carrying capacity of 35kg(UDL- Uniformly distributed load). All metal parts to have a Epoxy Polyester Powder coat finish within the range of 50 microns DFT (Dry film thickness) complete as directed by the Engineer. Size of each locker 400mm(L) x 450mm(W) x 305mm(HT). (Total 18 nos of lockers in each module.) Each unit shall have 9 shutters. Each locker shall have 10 Lever cam lock with lock lever & ABS plastic handle. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205)
35
-
-
... More
4 SEATER LINEAR MODULE (WS1)
TABLE SIZE: 1200mm(L) X 600mm(D) X 750mm(HT) LINEAR WORKSTATION Providing, fabricating and fixing in position Panel based modular cubicle type workstations which Includes Partition, work surface with side table & MS powder coated CPU trolley. Work surface shall be in 25mm thick exterior grade prelaminated Particle board with 2mm thk PVC imported edge banding tape. The bottom surface of the table shall also be laminated. The worktops shall be supported on MS powder coated frame & legs. Modesty panel shall be in MS powder coated panels/18mm prelam panels as per design. The worktops shall be provided with PVC wire manager for cabling.
Storage: Side storage shall have 1 module of drawers and 2 modules of sliding shutter cabinet .The top shall be in 25mm thick pre laminated particle board. The shutters & drawers shall be made of 18mm thick pre laminated particle board. All the exposed edges shall be sealed with 2mm thick PVC Imported edge banding. Cabinet shall be provided with single shelf and single shutter fixed on sliding mechanism. The drawer unit shall consist of 2 box drawer and 1 file drawer. The drawer box shall be fitted with roller Slide.The drawer unit shall be provided with central locking system, where in the three drawer shall be locked with one key. 4"SS 304 grade brush finish handles shall be provided.
Cubicle Partition: Partition thickness shall be 75mm with the inside gap between two tiles shall be approximately 50mm for higher wire carrying capacity.Frame Horizontals shall be of 1mm thick CRCA sheets & the verticals shall be of Aluminium Extrusions of 1.5mm thick Frame and shall be inline with the Top trims & end trims.. All the frames shall be duly powder coated. The partitions shall be provided with leveling bolts / screws to take care of undulations in the floor level.
Panel Tiles: The fabric tile panels shall be Constructed out of 4mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice.
Wire management: Internal Concealed Raceways shall be provided below work surface with switchboard arrangement for Power & Data along with PVC Wire manager with Grommet / scallops & Individual Raceway arrangement for Data/ Power cable. CPU Trolley & Keyboard tray: CPU trolley shall be made from 1mm Thick CRCA steel sheet. The trolley shall be mounted on lockable castors. The keyboard tray shall be MS powder coated & shall be fixed on telescopic channels & have provision for mouse pad.
All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer . (Refer drawing number – UM-IN-201 to UM-IN-205)
2
-
-
... More
8 SEATER LINEAR MODULE (WS2)
TABLE SIZE: 1200mm(L) X 600mm(D) X 750mm(HT) LINEAR WORKSTATION Providing, fabricating and fixing in position Panel based modular cubicle type workstations which Includes Partition, work surface with side table & MS powder coated CPU trolley. Work surface shall be in 25mm thick exterior grade prelaminated Particle board with 2mm thk PVC imported edge banding tape. The bottom surface of the table shall also be laminated. The worktops shall be supported on MS powder coated frame & legs. Modesty panel shall be in MS powder coated panels/18mm prelam panels as per design. The worktops shall be provided with PVC wire manager for cabling.
Storage: Side storage shall have 1 module of drawers and 2 modules of sliding shutter cabinet .The top shall be in 25mm thick pre laminated particle board. The shutters & drawers shall be made of 18mm thick pre laminated particle board. All the exposed edges shall be sealed with 2mm thick PVC Imported edge banding. Cabinet shall be provided with single shelf and single shutter fixed on sliding mechanism. The drawer unit shall consist of 2 box drawer and 1 file drawer. The drawer box shall be fitted with roller Slide.The drawer unit shall be provided with central locking system, where in the three drawer shall be locked with one key. 4"SS 304 grade brush finish handles shall be provided.
Cubicle Partition: Partition thickness shall be 75mm with the inside gap between two tiles shall be approximately 50mm for higher wire carrying capacity.Frame Horizontals shall be of 1mm thick CRCA sheets & the verticals shall be of Aluminium Extrusions of 1.5mm thick Frame and shall be inline with the Top trims & end trims.. All the frames shall be duly powder coated. The partitions shall be provided with leveling bolts / screws to take care of undulations in the floor level.
Panel Tiles: The fabric tile panels shall be Constructed out of 4mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice.
Wire management: Internal Concealed Raceways shall be provided below work surface with switchboard arrangement for Power & Data along with PVC Wire manager with Grommet / scallops & Individual Raceway arrangement for Data/ Power cable. CPU Trolley & Keyboard tray: CPU trolley shall be made from 1mm Thick CRCA steel sheet. The trolley shall be mounted on lockable castors. The keyboard tray shall be MS powder coated & shall be fixed on telescopic channels & have provision for mouse pad.
All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer . (Refer drawing number – UM-IN-201 to UM-IN-205)
1
-
-
... More
3 MODULE L SHAPED WORKSTATION (WS3)
TABLE SIZE: 1500mm(L) X 1500mm(D) X 750mm(HT) Providing, fabricating and fixing in position Panel based modular cubicle type workstations which Includes Partition, work surface with side table & MS powder coated CPU trolley. Work surface shall be in 25mm thick exterior grade prelaminated Particle board with 2mm thk PVC imported edge banding tape. The bottom surface of the table shall also be laminated. The worktops shall be supported on MS powder coated frame & legs. Modesty panel shall be in MS powder coated panels/18mm prelam panels as per design. The worktops shall be provided with PVC wire manager for cabling.
Storage: Side storage shall have 1 module of drawers and 2 modules of sliding shutter cabinet .The top shall be in 25mm thick pre laminated particle board. The shutters & drawers shall be made of 18mm thick pre laminated particle board. All the exposed edges shall be sealed with 2mm thick PVC Imported edge banding. Cabinet shall be provided with single shelf and single shutter fixed on sliding mechanism. The drawer unit shall consist of 2 box drawer and 1 file drawer. The drawer box shall be fitted with roller Slide.The drawer unit shall be provided with central locking system, where in the three drawer shall be locked with one key. 4"SS 304 grade brush finish handles shall be provided.
Cubicle Partition: Partition thickness shall be 75mm with the inside gap between two tiles shall be approximately 50mm for higher wire carrying capacity.Frame Horizontals shall be of 1mm thick CRCA sheets & the verticals shall be of Aluminium Extrusions of 1.5mm thick Frame and shall be inline with the Top trims & end trims.. All the frames shall be duly powder coated. The partitions shall be provided with leveling bolts / screws to take care of undulations in the floor level.
Panel Tiles: The fabric tile panels shall be Constructed out of 4mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice.
Wire management: Internal Concealed Raceways shall be provided below work surface with switchboard arrangement for Power & Data along with PVC Wire manager with Grommet / scallops & Individual Raceway arrangement for Data/ Power cable. CPU Trolley & Keyboard tray: CPU trolley shall be made from 1mm Thick CRCA steel sheet. The trolley shall be mounted on lockable castors. The keyboard tray shall be MS powder coated & shall be fixed on telescopic channels & have provision for mouse pad.
All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer . (Refer drawing number – UM-IN-201 to UM-IN-205)
1
-
-
... More
CABIN CHAIRS (C1) Supplying and placing in position armed revolving high back chairs of approved make and colour and BIFMA (The Business & Institutional furniture manufactures association) compliant. Chair shall have cushioned seat and back upholstered with good quality fabric of approved color. The seat and back shall be made of moulded foam with integrated lumber support having contoured shape at seat back for better comfort. The seat and back shall be made up of 12 ±0.1mm. thick hot-pressed plywood upholstered with moulded foam and fabric. The HR polyurethane foam shall be moulded with density= 42±2 kg/m3. The chair shall have BIFMA compliant Class 3 gas lift for seat height adjustment with an adjustment stroke of 100mm. The chair shall be provided with Centre Tilt mechnism with upright position locking, 360 degree revolution, Tilt tension adjustment, Nylon Castors along with Nylon Star Base. The twin wheel castors shall be injection moulded in Black Nylon. The chair shall have PP adjustable armrest with position locking. Overall Dimension: 590 (W) X 745 (D) X ( 1050-1145 )H. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer (Refer drawing number – UM-IN-201 to UM-IN-205)
2
-
-
... More
STAFF CHAIRS (C2) Supplying and placing in position armed revolving mid back chairs of approved make and colour and BIFMA (The Business & Institutional furniture manufactures association) compliant. Chair shall have cushioned seat and back upholstered with good quality fabric of approved color. The seat and back shall be made of moulded foam with integrated lumber support having contoured shape at seat back for better comfort. The seat and back shall be made up of 12 ±0.1mm. thick hot-pressed plywood upholstered with moulded foam and fabric. The HR polyurethane foam shall be moulded with density= 42±2 kg/m3. The chair shall have BIFMA compliant Class 3 gas lift for seat height adjustment with an adjustment stroke of 100mm. The chair shall be provided with Centre Tilt mechnism with upright position locking, 360 degree revolution, Tilt tension adjustment, Nylon Castors along with Nylon Star Base. The twin wheel castors shall be injection moulded in Black Nylon. The chair shall have PP adjustable armrest with position locking. Overall Dimension: 590 (W) X 670 (D) X ( 985-1080 ) H. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer (Refer drawing number – UM-IN-201 to UM-IN-205)
25
-
-
... More
VISITOR CHAIRS (C3) Supplying and placing in position armed revolving low back chairs of approved make and colour and BIFMA (The Business & Institutional furniture manufactures association) compliant. Chair shall Supply and installation of a Low Back Chair having cushioned seat and back upholstered with good quality fabric of approved color. The seat and back shall be made of moulded foam with integrated lumber support having contoured shape at seat back for better comfort. The seat and back shall be made up of 12 ±0.1mm. thick hot-pressed plywood upholstered with moulded foam and fabric. The HR polyurethane foam shall be moulded with density= 42±2 kg/m3. The chair shall have BIFMA compliant Class 3 gas lift for seat height adjustment with an adjustment stroke of 100mm. The chair shall be provided with Centre Tilt mechnism with upright position locking, 360 degree revolution, Tilt tension adjustment, Nylon Castors along with Nylon Star Base. The twin wheel castors shall be injection moulded in Black Nylon. The chair shall have PP adjustable armrest with position locking. Overall Dimension: 590 (W) X 615 (D) X ( 935-1030 ) H. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205)
6
-
-
... More
FOOD COURT CHAIRS (C4) Supplying and Placing in position Chairs of approved make and colour moulded in polypropylene. The seat and back shall be of one piece injection. The tubular understructure shall be fabricated SS 202 grade tube welded together with SS connecting rods. The understructure shall be provided with black PP injection moulded ferrules. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205)
194
-
-
... More
BUSINESS LOUNGE & C.O.E - DISCUSSION CHAIRS (C5) Supplying & placing in position study chair of approved design, colour and size having solid frame structure with inner frame made of kiln chemical treated approved high quality wood. The seat cusion shall be made of 4" multi layered foam of density 32D and HD with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The thread used shall be nylon bonded to provide lasting stitch strength. The backrest shall be made of 2" foam of 23D with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The thread used shall be nylon bonded to provide lasting stitch strength.The outer finish shall be of superior quality leatherette (upto Rs. 1100 per metre) stitched with nylon bonded thread. The legs shall be prong type of s.s 304 grade sections. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.(Seat Height - 410 - 450mm mm). (Refer drawing number – UM-IN-201 to UM-IN-205)
15
-
-
... More
BUSINESS LOUNGE CHAIRS (C6) Supplying & placing in position study chair of approved design, colour and size having solid frame structure with inner frame made of kiln chemical treated approved high quality wood. The seat cusion shall be made of 4" multi layered foam of density 32D and HD with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The thread used shall be nylon bonded to provide lasting stitch strength. The backrest shall be made of 2" foam of 23D with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The thread used shall be nylon bonded to provide lasting stitch strength.The outer finish shall be of superior quality leatherette (upto Rs. 1200 per metre) stitched with nylon bonded thread. The legs shall be prong type of s.s 304 grade sections. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.(Seat Height - 410 - 450mm mm). (Refer drawing number – UM-IN-201 to UM-IN-205)
16
-
-
... More
BUSINESS LOUNGE - SOFA CHAIRS (C7) Supplying & placing in position lounge chair of approved design, colour and size having solid frame structure with inner frame made of kiln chemical treated approved high quality wood. The seat cusion shall be made of 4" multi layered foam of density 32D and HD with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The thread used shall be nylon bonded to provide lasting stitch strength. The backrest shall be made of 2" foam of 23D with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The thread used shall be nylon bonded to provide lasting stitch strength.The outer finish shall be of superior quality leatherette (upto Rs. 1200 per metre) stitched with nylon bonded thread. The legs shall be prong type of s.s 304 grade sections. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.(Seat Height - 410 - 450mm mm). (Refer drawing number –UM-IN-201 to UM-IN-205)
2
-
-
... More
SEMINAR HALL - CHAIRS (C8) Supplying and placing in position Training flap type chairs having Chair Seat & back in PP (polypropylene) with cushion on seat. The Frame shall be in M. S powder coating with eye shape pipe of 30mm x 15mm x 16g, PU cladding on Arms , Writing Tablet in both side prelaminated particle board with all side edge banding.All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205)
255
-
-
... More
SLATTED BENCH Supplying and installing in position bench of approved make, design and size with top made up of WPC (wood plastic composite) slats & framework & legs in Stainless steel 304 grade rectangular sections of size 50mm x 25mm x 2 mm as per approved design. All material shall be of approved make. All works complete as per the drawing / Image, technical specification and direction of the Engineer. (Refer drawing number –UM-IN-201 to UM-IN-205) BENCH (SB1)
SIZE: 1800(L) X 450(D) X 450(HT)
36
-
-
... More
3 SEATER SOFA (LOBBY/ WAITNG) (S1) SOFA- (ADMIN) Supplying & placing in position sofa of approved design, colour and size having solid frame structure with inner frame made of kiln chemical treated approved high quality wood. The seat cusion shall be made of 7" multi layered foam of density 32D and HD with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The thread used shall be nylon bonded to provide lasting stitch strength. The backrest shall be made of 4 inch foam of 23D with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The seating cushions shall have 2 inches of elastic webbing of 250 gsm with diagonal weave. The thread used shall be nylon bonded to provide lasting stitch strength. The outer finish shall be of superior quality leatherette (upto Rs. 550 per metre) stitched with nylon bonded thread. The legs and frame shall be of s.s 304 grade tubular section and 2 mm thickness with rubber gasket. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.(Seat Height: 410 - 45mm) (Refer drawing number – UM-IN-201 to UM-IN-205)
1
-
-
... More
1 SEATER SOFA ( BUSINESS LOUNGE ) (S2) SOFA ( BUSINESS LOUNGE) (S2,S3,S4) Supplying & placing in position sofa of approved design, colour and size having solid frame structure with inner frame made of kiln chemical treated approved high quality wood. The seat cusion shall be made of 7" multi layered foam of density 32D and HD with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The thread used shall be nylon bonded to provide lasting stitch strength. The backrest shall be made of foam of 23D with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The seating cushions shall have elastic webbing of 250 gsm with diagonal weave. The thread used shall be nylon bonded to provide lasting stitch strength.The outer finish shall be of superior quality leatherette (upto Rs. 700 per metre) stitched with nylon bonded thread. The legs shall be of PVD coated SS 304 grade tubular section of height 100mm and 2 mm thickness with rubber gasket. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.(Seat Height - 410 mm) (Refer drawing number – UM-IN-201 to UM-IN-205)
34
-
-
... More
2 SEATER SOFA ( BUSINESS LOUNGE ) (S3) SOFA ( BUSINESS LOUNGE) (S2,S3,S4) Supplying & placing in position sofa of approved design, colour and size having solid frame structure with inner frame made of kiln chemical treated approved high quality wood. The seat cusion shall be made of 7" multi layered foam of density 32D and HD with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The thread used shall be nylon bonded to provide lasting stitch strength. The backrest shall be made of foam of 23D with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The seating cushions shall have elastic webbing of 250 gsm with diagonal weave. The thread used shall be nylon bonded to provide lasting stitch strength.The outer finish shall be of superior quality leatherette (upto Rs. 700 per metre) stitched with nylon bonded thread. The legs shall be of PVD coated SS 304 grade tubular section of height 100mm and 2 mm thickness with rubber gasket. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.(Seat Height - 410 mm) (Refer drawing number – UM-IN-201 to UM-IN-205)
9
-
-
... More
3 SEATER SOFA ( BUSINESS LOUNGE ) (S4) SOFA ( BUSINESS LOUNGE) (S2,S3,S4) Supplying & placing in position sofa of approved design, colour and size having solid frame structure with inner frame made of kiln chemical treated approved high quality wood. The seat cusion shall be made of 7" multi layered foam of density 32D and HD with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The thread used shall be nylon bonded to provide lasting stitch strength. The backrest shall be made of foam of 23D with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The seating cushions shall have elastic webbing of 250 gsm with diagonal weave. The thread used shall be nylon bonded to provide lasting stitch strength.The outer finish shall be of superior quality leatherette (upto Rs. 700 per metre) stitched with nylon bonded thread. The legs shall be of PVD coated SS 304 grade tubular section of height 100mm and 2 mm thickness with rubber gasket. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.(Seat Height - 410 mm) (Refer drawing number – UM-IN-201 to UM-IN-205)
4
-
-
... More
HELP DESK (B1)
SIZE: 5300mm(L) X 700mm(D) X1100mm(HT) Providing & fixing in position help desk in 19mm thick Marine BWP (boiling water proof) plywood and finished in 12mm thk 100% acrylic UV grade solid surface for ledge, fascia box and top and 4mm thick veneer externally for remaining surfaces and 1mm thick laminate internally. Table shall be provided with keyboard trays, fixed drawer and cabinets. Drawer shall be in 19 mm thick plywood front fascia, 12mm ply for sides and back, with 6mm ply for base & finished with 4mm thick veneer externally and 1mm thick laminate internally and shall be supported on telescopic side mounted channels. The drawer unit shall have locking arrangement & PVD coated SS 304 grade selected handles (100mm) Cabinets shall have shutters in 19mm thick ply fixed on SS. brush finished brass hinges and single shelf each in 19mm ply & finished with 1mm thick laminate along sides and edges & fixed on stainless steel finished shelf buttons. Shutters shall be fixed with heavy duty brushed finish handles (100 mm). All internal exposed edges to be finished with 1mm laminate or PVC edge banding tape. All external exposed edges shall be finished with teak wood lipping with 3 coats or more of melamine polish to match the shade of veneer. All works shall be complete with necessary labour, hardware, cleaning, placing in position etc. Provision shall be made for wire management to take care of basic wiring requirement for providing power data- voice switches on a modular switch plate.Table shall have independent wire manager of standard size, Stainless steel finished hardware. The rate shall include cleaning, placing in position, etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-601)
1
-
-
... More
COUNTER IN BUSINESS LOUNGE (B2)
SIZE: 3600 mm(L) X 700mm(D) X 1100 mm(HT) Providing & fixing in position help desk in 19mm thick Marine BWP (boiling water proof) plywood and finished in 12mm thk 100% acrylic UV grade solid surface for ledge, fascia box and top and 4mm thick veneer externally for remaining surfaces and 1mm thick laminate internally. Table shall be provided with keyboard trays, fixed drawer and cabinets. Drawer shall be in 19 mm thick plywood front fascia, 12mm ply for sides and back, with 6mm ply for base & finished with 4mm thick veneer externally and 1mm thick laminate internally and shall be supported on telescopic side mounted channels. The drawer unit shall have locking arrangement & PVD coated SS 304 grade selected handles (100mm) Cabinets shall have shutters in 19mm thick ply fixed on SS. brush finished brass hinges and single shelf each in 19mm ply & finished with 1mm thick laminate along sides and edges & fixed on stainless steel finished shelf buttons. Shutters shall be fixed with heavy duty brushed finish handles (100 mm). All internal exposed edges to be finished with 1mm laminate or PVC edge banding tape. All external exposed edges shall be finished with teak wood lipping with 3 coats or more of melamine polish to match the shade of veneer. All works shall be complete with necessary labour, hardware, cleaning, placing in position etc. Provision shall be made for wire management to take care of basic wiring requirement for providing power data- voice switches on a modular switch plate.Table shall have independent wire manager of standard size, Stainless steel finished hardware. The rate shall include cleaning, placing in position, etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-602)
1
-
-
... More
STORAGE UNIT -LAMINATE FINISH (450mm depth) (B3) Providing & fixing in position storage in 19 mm thick Marine BWP (boiling water proof) plywood & finished with 1mm thick approved laminate externally and 1mm thick laminate internally. Back sheet shall be in 8mm plywood & cabinets with shutters fixed on SS. brush finished brass hinges and shelf in 19mm ply & finished with 1mm thick internal laminate on both sides & fixed on stainless steel finished shelf buttons. Cabinet shutters shall be fixed with heavy duty SS 304 brushed finish handles (100 mm) . All exposed edges of plywood shall be finished with 1mm thick laminate or PVC edge banding tape and second class teak wood lipping where ever necessary with 2 to 3 coats of melamine polish to match the shade of laminate & complete with necessary labour, hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-603)
12.66
-
-
... More
STORAGE UNIT - VENEER & SOLID SCRYLIC SURFACE FINISH (450mm depth) (B4) Providing & fixing in position storage in 19mm thick Marine BWP (boiling water proof) plywood & finished with 4mm thick veneer externally and 1mm thick laminate internally and with top in 12mm thk 100% acrylic UV grade solid surface of approved shade,texture and buffed upto desired finish is achieved . Back sheet shall be in 8mm plywood & cabinets with shutters fixed on SS. brush finished brass hinges and shelf in 19mm ply & finished with 1mm thick internal laminate on both sides & fixed on stainless steel finished shelf buttons. Cabinet shutters shall be fixed with heavy duty SS 304 grade brushed finish handles (100mm). All internal exposed edges to be finished with 1mm laminate or PVC edge banding tape. All external exposed edges shall be finished with teak wood lipping with 3 coats or more of melamine polish to match the shade of veneer. All works shall be complete with necessary labour, hardware, cleaning, placing in position etc All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-604)
6.13
-
-
... More
LEDGE (300mm depth) - LAMINATE FINISH (B5) Providing & fixing in position 300mm depth ledge in 19mm thick Marine BWP (boiling water proof) plywood & finished with 1mm thick laminate on all sides with ledge thickness of 50mm in ply fascia. The ledge shall be fixed on wall/column/partition etc. with back supports and intermediate supports in ply. The rate shall include cleaning, placing in position, etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-605
25
-
-
... More
GYPSUM PLASTERBOARD PARTITION (B6) Providing & fixing in position solid partition made of aluminum framework of size 65mm x 38 mm tubular frame,18 gauge having grid spacing at 600mmx600mm center to center both ways & covered with 8mm thick Marine BWP (boiling water proof) plywood on both sides of framework & finished with 12mm thick Gypsum with 3 or more coats of plastic emulsion paint of approved shade (rate shall not include painting work). The framework shall be properly screwed to the walls, ceiling and floor and plywood shall be screwed to the framework. The space between the framework grid shall be filled with glass wool having density of 48 Kg/ Cum for sound insulation. Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. Provision shall be made for wire management to take care of basic wiring requirement for providing power data- voice switches on a modular switch plate. All material will be of approved make. Measurements shall be calculated from finished floor level to false ceiling level, the framework above false ceiling will not be calculated but the rate shall include the cost of framework above false ceiling upto slab/beam bottom. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-606)
32.87
-
-
... More
GLASS PARTITION (B7) Providing & fixing full height glass partition with 12 mm thick toughened glass having etching pattern/3M film as approved fixed on Twin pro Interlocking anodized solid aluminum Single glazing profile both sides as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion.The item also includes silicon filling in between glass & lipping . All material shall be of approved make.All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-607)
876.33
-
-
... More
LAMINATE PARTITION (B8) Providing & fixing in position laminate finish partition having aluminium framework (approved make) of size 65mm x 38 mm tubular frame ,18 gauge, having grid spacing at 600mmx600mm centre to centre both ways & covered with 12 mm thick Marine BWP (boiling water proof) plywood on all sides of framework & finished with 1mm thick laminate of approved color and texture. The framework shall be properly screwed to the walls/beams/columns/ floor and plywood shall be screwed to the framework. The space between the framework grid shall be filled with glass wool having density of 48 Kg/ Cum for sound insulation. Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-608)
60.22
-
-
... More
SINGLE SHUTTER GLASS DOOR (B9) (SIZE - 900mm(L) x2400mm(HT) Providing & fixing in position single shutter glass door using 12 mm thick toughened glass having etching pattern/3M film as approved & fixed using heavy duty double action floor spring, SS 304 brush finish solid top patch with pivot and provided with SS 304 grade matt finish handle, SS brush finish solid bottom patch lock .All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-609)
3
-
-
... More
DOUBLE SHUTTER GLASS DOORS (B10a, B10b) Providing & fixing in position double shutter glass door using 12 mm thick toughened glass having etching pattern/3M film as approved & fixed using heavy duty double action floor spring, SS brush finish solid top patch with pivot and provided with SS 304 grade matt finish handle, SS brush finish solid bottom patch lock .All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-610a, UM-IN-610b) (SIZE - 1500mm(L) x2400mm(HT)
3
-
-
... More
DOUBLE SHUTTER GLASS DOORS (B10a, B10b) Providing & fixing in position double shutter glass door using 12 mm thick toughened glass having etching pattern/3M film as approved & fixed using heavy duty double action floor spring, SS brush finish solid top patch with pivot and provided with SS 304 grade matt finish handle, SS brush finish solid bottom patch lock .All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-610a, UM-IN-610b) (SIZE - 1500mm(L) x2750mm(HT)
68
-
-
... More
SINGLE SHUTTER FLUSH DOOR (B11) (SIZE - 900mm(L) x2400mm(HT) Providing & fixing in position door made with solid core waterproof flush door shutter of 35mm thick & finished with 1mm thick laminate of approved colour & texture on both sides & second class Indian teak wood lipping of size 38x12mm on edges of shutter. Door shall be fixed using SS. brush finished brass butt hinges & provided with a surface mounted hydraulic door closer, SS matt finish concealed mortise lock case with lever handle, profile thumb turn cylinder (with key outside & thumb turn inside) with key hole, PVC door buffer & SS brush finish door stopper. All exposed second class Indian teak wood lipping & frame shall be finished with 2 to 3 coats of melamine polish (Matt/Gloss) to match the colour/ shade of the laminate including final coat of buffing till the required finish is achieved. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-611)
2
-
-
... More
MODULAR TOILET CUBICLES (B12) Supplying and Installing in position rest room cubicles in 12mm thick solid compact laminate of approved shade and make having partition of 12mm thickness, height upto 2.1 mts from finished floor, including all necessary accessories like "U" Channels, Top Rail, adjustable foots, Floor anchors etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-612)
381.15
-
-
... More
VENEER FINISH PANELING (B13) Providing & fixing in position paneling in 12mm thick Marine BWP (boiling water proof) plywood finished with 4mm thk veneer as per design and having horizontal & vertical framework at 600mm c/c of maximum depth 200mm in 19mm thick double ply fixed on wall /beam /column /slab/partition wherever required. Cove for indirect lighting shall be made as per design. All internal exposed edges to be finished with 1mm laminate or PVC edge banding tape. All external exposed edges shall be finished with teak wood lipping with 3 coats or more of melamine polish to match the shade of veneer. All works shall be complete with necessary labour, hardware, cleaning, placing in position etc. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-613)
37
-
-
... More
LAMINATE FINISH PANELING (B14) Providing & fixing in position paneling in 12mm thick Marine BWP (boiling water proof) plywood finished with 1mm thk laminate as per design and having horizontal & vertical framework at 600mm c/c of maximum depth 200mm in 19mm thick double ply fixed on wall /beam /column /slab/partition wherever required.Cove for indirect lighting shall be made as per design. All internal exposed edges shall be finished with 1mm laminate or PVC edge banding tape. All external exposed edges shall be finished with teak wood lipping with 3 coats or more of melamine polish to match the shade of laminate. All works shall be complete with necessary labour, hardware, cleaning, placing in position etc. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-614)
147.44
-
-
... More
ACOUSTIC BOARD PANELING (B15) Providing & fixing in position paneling in 12mm thick Marine BWP (boiling water proof) plywood finished with 10mm thick acoustical panels of approved colour and design. Framework for panelling shall be in horizontal & vertical framework at 600mm c/c of depth upto 100mm in 19mm thick double ply fixed on wall /beam /column /slab/partition wherever required. Acoustic board panels shall be in 9-10mm thickness polyester fibre board (1900/200GSM) of size 1.22x2.44mm. The boards shall be laser cut to required size & shape as per design and shall be pasted onto the plywood surface with required adhesive. The boards shall have good acoustic performance and shall be resistant to humdity & moisture. The boards shall be of required color shade and may be custom printed if required. All works shall be complete including all necessary labour, hardware & accessories, grooves, adhesives, cutting & making good the original surfaces etc. All material shall be of approved make. Measurements shall be calculated of as laid area.All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-615)
105.18
-
-
... More
GYPSUM PLASTERBOARD FINISH PANELLING (B16) Providing & fixing in position paneling in 19 mm and 12mm thick Marine BWP (boiling water proof) plywood finished with 12mm thk gypsum plasterboard as per design and having horizontal & vertical framework at 600mm c/c of necessary depth in 19mm thick double ply fixed on wall /beam /column /slab wherever required. All joints shall be finished using gypsum jointing tape. All works shall complete with necessary labour, hardware, cleaning, placing in position etc. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-616)
47.88
-
-
... More
SOLID ACRYLIC SURFACE FINISH PANELLING (B17) Providing & fixing in position paneling in 19 mm and 12mm thick Marine BWP (boiling water proof) plywood finished with 12mm thk 100% acrylic UV grade solid surface of approved finish,texture,translucency,shade as per design and having horizontal & vertical framework at 600mm c/c of necessary depth upto 100mm in 19mm thick double ply fixed on wall /beam /column /slab/partition wherever required. Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-617
27.53
-
-
... More
PVD PROFILE INLAY (B18) Providing & fixing PVD coated SS T profile of 12mm width on wall/column/gypsum board partition/panelling by making groove of required size and pasting with necessary adhesive including labour. The rate shall include cleaning, placing in position, etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-618)
60
-
-
... More
LASER CUT MDF SCREEN (B19) Providing & fixing in position 12mm thick MDF laser cut screen with frame in plywood of approved design. The frame shall be in 19mm thick marine BWP plywood box section and shall be finished with 6mm thick mdf on all sides. The laser cut screen shall be finished with approved shade of duco paint and shall be fixed to frame with wooden lipping. All mdf surfaces shall be finished with approved shade duco paint to achieve desired finish.All works shall be complete with necessary labour, hardware, cleaning, placing in position etc.All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-619)
18
-
-
... More
LASER CUT PVD COATED SS SCREEN (LINEAR) (B20) Providing & fixing in position linear screen in PVD coated stainless steel (SS304 grade) frame & laser cut screen having thickness of 1.2mm in approved design and size. The finish and colour shall be as per selection. The screen shall have frame and shall be mounted at desired location as per design complete with necessary labour, hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-620)
29
-
-
... More
LASER CUT PVD COATED SS SCREEN (CURVED) (B21) Providing & fixing in position curvinlinear screen in PVD coated stainless steel (SS304 grade) frame & laser cut screen having thickness of 1.2mm in approved design and size. The finish and colour shall be as per selection. The screen shall have frame and shall be mounted at desired location as per design complete with necessary labour, hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-621)
15
-
-
... More
BENCH (B22) Providing & fixing in position seating bench in vertical frame work in 50mm x 50mm x 2.9mm thick mild steel powder coated sections, over which 50mm x 50mm x 2.9mm thick M.S. sections frame work with intermediate supports shall be be welded. Bench top shall be in 50mm x 25 mm x 2.9mm mild steel sections welded to M.S. section framework. All works shall be complete with hardware, cleaning, placing in position,labour etc. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.(Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-622)
18
-
-
... More
PLATFORM (B23) Providing & fixing in position 200mm height wooden stage, having 38mm thick top, framework in 38x162mm matti wood planks at approximately 600mm x 600mm centre to centre placed both ways as shown in the drawing and all sides in 38 x 162 mm matti wood planks. Top shall be in 150mm wide & 38mm thick matti wood planks fixed with tongue and groove joint. All external exposed surfaces shall be finished with 3 or more coats of Melamine polish and french polish on underside/ internal surfaces complete with necessary labour and hardware, wire management etc complete as per drawing. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-623)
20.17
-
-
... More
TRAP DOOR (B24) Providing & fixing in position 28mm thick trap door, frame work in 12 mm thick Marine BWP (boiling water proof) plywood frame work with 6mm plywood on both sides and finished with french polish internally and 4mm MDF with approved paint externally. Door shall be fixed on heavy duty SS. brush finished brass hinges on Aluminium framework of size 38mm x 65mm of thickness 18guage and height from 150 mm to1000 mm from slab bottom.All exposed edges shall be finished with second class teak wood lipping of required size with 2 to 3 coats of melamine polish to match the shade of wall/ceiling paint with necessary labour. Measurements will be considered for door size only. The rate shall include cleaning, placing in position, etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer (Refer drawing number – UM-IN-201 to UM-IN-205, UM-IN-624)
13.44
-
-
... More
STAINLESS STEEL OPEN DUST BIN Providing and placing in position 16 gauge stainless steel dust bin of grade 304 cylindrical without cover . All material shall be of approved make. All complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-501 to UM-IN-505)
7
-
-
... More
Stainless Steel Sliver Push Can Open Top Dustbin 350x800 Inch Providing and placing in position 16 gauge stainless steel dust bin of grade 304 cylindrical with cover (350mm dia x 800mm ht). All material shall be of approved make. All complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-501 to UM-IN-505)
45
-
-
... More
Wall Clock Supply and fixing in position approved make, approved colour wall clock circular or square (min one side 250mm) quartz with bold numbers, 3 hands. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-501 to UM-IN-505)
1
-
-
... More
PICTURE FRAME Supplying & fixing in position approved painting in digital printing on digital printing paper with synthetic frame & lamination. The details need to be as per the instructions of Engineer. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-501 to UM-IN-505) PICTURE FRAME (SIZE : 900 X 600 MM)
9
-
-
... More
ROLLER BLIND Providing & fixing in position roller blinds of approved fabric with aluminum extruded rail powder coated in white. Control unit to be made of high strength reinforced plastic. Roller tube to be anodised extruded tube of high strength alloy, including all necessary fittings and fixtures like idler, head rail, control unit, roller tube, bottom rail, operating chain, fixing brackets, clamps, etc. complete. Fabric shall be of approved make, color, length,texture. All the materials shall be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer (Refer drawing number – UM-IN-501 to UM-IN-505)
186.93
-
-
... More
LAMINATED WOODEN FLOORING Providing and laying laminated wooden flooring with tongue and groove joints of approved make (armstrong/ ego ) laid as shown in drawing with 2mm thick inlay as approved laid on floor. necessary beading/ skirting required for completion including adhesive also includes in the item.the item also include levelling with plaster of paris if required & as per instruction of engineer in charge (Refer drawing number – UM-IN-501 to UM-IN-505)
768
-
-
... More
CARPET ROLL Providing and fixing of tufted loop pile carpet having gauge of 1/10, pile weight 350 gsm,thickness 4 mm fixed to the flooring with SR (Synthetic rubber) solution with 8mm U-foam underlay, including minor leveling with plaster of Paris. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-501 to UM-IN-505)
61.6
-
-
... More
VINYL ARTWORK Providing and fixing in position vinyl artwork of approved design, texture & make and pasted with glue/ special adhesive in line & level so as the joints are invisible. Vinyl used shall have matt lamination with eco solvent printing. All works complete as per the drawing, specification and direction of the Engineer. All the materials shall be of approved make. (Refer drawing number (Refer drawing number – UM-IN-501 to UM-IN-505)
29
-
-
... More
MIRROR - (SIZE :600MMX900MM) Providing & fixing in position mirror of approved design, make, colour and size in 6mm thickness with plain crystal edge polish on all sides and fixed using stainless steel mirror holding buttons/brackets, mirror back shall be flushed with wall & complete with necessary labour, hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing / Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-501 to UM-IN-505)
100
-
-
... More
GLASS FROSTED FILM Providing & installing in position PVC frosted translucent glass film with self adhesive & laser cut to required design and pasted on glass. All material shall be of approved make. All works complete as per the drawing / Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-501 to UM-IN-505)
10.08
-
-
... More
INTERNAL SIGNAGES (ACP) SIZE - 300mm (L) X150mm (HT) INTERNAL SIGNAGES SIZE (ACP) Providing and fixing in position signages made from 4 mm thick aluminium composite panel with computer cut lettering of specified height and width, self adhesive vinyl pasted on it to protect from peeling. The panel will be fixed on the door/wall with 12mm SS. stud /SS mirror screw arrangement /3m Tape or suspended from the ceiling by means of SS chain of 8mm dia with anchor fasteners complete as required. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer (Refer drawing number – UM-IN-501 to UM-IN-505)
54
-
-
... More
INTERNAL SIGNAGES (ACP) SIZE - 300mm (L) X150mm (HT)
HANGING ON CHAIN INTERNAL SIGNAGES SIZE (ACP) Providing and fixing in position signages made from 4 mm thick aluminium composite panel with computer cut lettering of specified height and width, self adhesive vinyl pasted on it to protect from peeling. The panel will be fixed on the door/wall with 12mm SS. stud /SS mirror screw arrangement /3m Tape or suspended from the ceiling by means of SS chain of 8mm dia with anchor fasteners complete as required. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer (Refer drawing number – UM-IN-501 to UM-IN-505)
26
-
-
... More
INTERNAL SIGNAGES (ACP)SIZE - 900mm (L) X1200mm (HT) INTERNAL SIGNAGES SIZE (ACP) Providing and fixing in position signages made from 4 mm thick aluminium composite panel with computer cut lettering of specified height and width, self adhesive vinyl pasted on it to protect from peeling. The panel will be fixed on the door/wall with 12mm SS. stud /SS mirror screw arrangement /3m Tape or suspended from the ceiling by means of SS chain of 8mm dia with anchor fasteners complete as required. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer (Refer drawing number – UM-IN-501 to UM-IN-505)
27
-
-
... More
LETTERS OF BUILDING NAME (INTERNAL) Providing and fixing in position three dimensional building name using 18 gauge brush finish 304 grade stainless steel sheet lettering of width 38 mm x height 250 mm, projecting 25mm from the wall/partition/panelling and fixed at specified height in line and level by means of fully threaded stainless steel holdfast /studs which will be vertically welded to the back side of each letter. The stainless steel holdfast / studs will be inserted to the wall/partition/panelling by means of drilled holes and fixed with silicon for permanent fixing purpose and any other accessories etc. complete.All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number – UM-IN-501 to UM-IN-505)
9
-
-
... More
DECORATIVE GFRC PLANTER Providing and installing in position decorative planter in GFRC of size around 800mm dia x 800mm height of approved design, color, texture complete with handing over to client etc. All material shall be of approved make. All works complete as per the drawing, specification, image and direction of the Engineer (Refer drawing number – UM-IN-501 to UM-IN-505)
70
-
-
... More
CALCIUM SILICATE BOARD FALSE CEILING Providing and fixing 8mm thick calcuim silicate board suspended false ceiling false ceiling in horizontal / vertical surfaces, stepped, cove ( straight & curvature). The calcuim silicate board having density of 850 to 950kg/m3, shall be made from Siliceous & Calcareous material reinforced with fiber,made in Laminar process and then autoclaved to give stable crstalline structure. The framework shall consist of approved make Galvanised iron (GI) Perimeter Channel of 0.55 mm thickness, two unequal flanges of 20 mm and 30 mm and web of 27 mm fixed to surrounding walls / partition by using nylon sleeves and screws at 450 mm centres. Approved make Galvanised iron (GI) Intermediate Channel of 0.9 mm thickness having two equal flanges of 15 mm each and a web of 45 mm shall be suspended from the soffit at 1220 mm centre with G.I.Cleat and steel expansion fasteners. Galvanised iron (GI) Ceiling section of 0.55 mm thickness having web of 50.5 mm and flanges of 26 mm each with lips of 10.5 mm shall be fixed to the Intermediate channel with connecting clips across to the Intermediate channel at 457 mm centres.respectively. Calcuim silicate boards of 8 mm thickness having taper edge /Square edge shall be screw fixed across the ceiling sections with 25 mm long self drilling.The item shall include providing markings and cutouts for electrical fixtures,sprinklers,smoke detectors,diffusers,curtains etc. on the ceiling and also providing & fixing templates in the ceiling made of 12/19mm BWP (boiling water proof) plywood. All material shall be of approved make. Measurements shall be considered wall to wall without any deductions. All works shall be complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-301 to UM-IN-305)
7665.47
-
-
... More
600X600MM CALCIUM SILICATE ACOUSTICAL TILE FALSE CEILING Providing & fixing 15mm thk densified tengular edged eco friendly light weight Calcium Silicate false ceiling tiles (like Aerolite Brand or Equivalent) of approved texture Spintone/ Cosmos/ Fine Fissured or equivalent of size 595mm x 595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per square metre. including both side) consisting of main "T" runner suitably spaced at joints to get required length & of size 24x38mm made from 0.33mm thk (minimum) sheet, spaced 1200mm center to center, and cross "T" of size 24x28mm made of 0.33mm thk (Minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size on a Perimeter wall angle precoated steel of size 600x600mm, resting on periphery walls/ partitions (24x24x300mm) made of 0.40mm thk (minimum) sheet with the help of rawl plugs at 450mm & laying 15mm thk densified edges calcium silicate ceiling tiles of approved texture light fittings, fixture, smoke detectors etc., wherever required. Main "T" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to celing using with 12.5mm dia & 50mm long dash fastners, level clips of size 85x30x0.8mm, spaced at 1200mm center to center along main "T" bottom exposed with 24mm of T-section shall be pre-painted with polyester baked paint for all heights as per specifications,drawings etc. complete. Note: Only Calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30sqm. The Calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection85% non-combustible as per B.S.476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC.The work shall be carried out as per specifications, drawing & as per directions of Engineer-in-Charge. With 15mm thk tegular edged light weight calcium silicate false ceiling tiles. The item shall include providing markings and cutouts for electrical fixtures, sprinklers, smoke detectors, diffusers, curtains etc. on the ceiling & also providing & fixing templates in the ceiling made of 12/19mm BWP (boiling water proof) plywood. All material shall be of approved make. All works shall be complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-301 to UM-IN-305)
484.65
-
-
... More
PERFORATED GYPSUM PLASTERBOARD ACOUSTICAL FALSE CEILING Providing and fixing Perforated gypsum plasterboard Acoustical suspended ceiling. The framework shall have surface ribbed perimeter channels (having one flange of 20mm and another flange of 30mm and a web of 27mm) along the perimeter of ceiling, screw fixed to brick wall/partition with the help of nylon sleeves and screws, at 610mm centers. surface ribbed intermediate channels of size 45mm (with two flanges of 15mm each) shall be suspended from the soffit at 1200mm centers with surface ribbed ceiling angle of width 25mmx10mm fixed to soffit with GI cleat and steel expansion fasteners. Then surface ribbed ceiling section having web of 51.5mm and two flanges of 26mm each with lips of 10.5mm shall be fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 600mm centers. Single layer of 12.5mm perforated board of size 1200x2400mm having all four tapered edges, 16% perforation area of board and hole size of 12mm square shape, backed with acoustic tissue shall be screw fixed to ceiling section with 25mm drywall screws at 230mm centers. Screw fixing shall be done mechanically either with screw driver or drilling machine with suitable attachment. Square and tapered edges of the boards shall be jointed and finished so as to have a flush look which includes filling and finishing with Jointing compound, Joint Paper tape and two coats of drywall top coat. All material shall be of approved make. The item shall include providing markings and cutouts for electrical fixtures,sprinklers,smoke detectors,diffusers,curtains etc. on the ceiling and also providing & fixing templates in the ceiling made of 12/19mm BWP (boiling water proof) plywood. Measurements shall be considered wall to wall without any deductions. All complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-301 to UM-IN-305)
701.56
-
-
... More
ALUMINIUM METAL TILE GRID FALSE CEILING Providing & fixing Plain Aluminium metal tile grid suspended false ceiling system with Lay-in type aluminium powder-coated panels & 15mm 'T' Framework. The Panels in form of tiles shall be lay-in type of size 584mm X 584 mm X 10 mm high making a module of 600mm X 600mm & shall be made out of 0.7mm thick aluminium with Square edges having recess flange of 15mm. The tile end shall be raised upward by 38mm and bend outward to lay the tile in framework. The tiles shall be made from corrosion resistant Al.-Mg. Alloy AA3105. The Tile shall be epoxy polyester powder coated with Antibac in white colour which is complaint to ROHS directive. The Primary Suspension shall consist of Pre punched 15mm width Main Tee section made out of GI. The exposed surface shall have an Aluminium coil coated cap. The Secondary suspension shall consist of pre-punched 15mm width cross tee section in 600mm and 1200mm size made out of GI. The exposed surface shall have an Aluminium coil coated cap. The 15mm main tee runners shall be suspended at an interval of 1200mm centre to centre. The 15mm cross tee runner shall be suspended at 600mm centre to centre and further supported with 15mm cross tee at 600mm centre to centre with interlocking arrangements to form grid of 600mm x 600mm. The main tee shall be supported by means of 4mm dia galvanised steel (G.I.) rod from slab/roof. The suspension shall be provided at 1200 to 1500mm centre to centre. The adjustment suspension clip shall be made of galvanised spring steel butterfly shaped with pre punched holes to accommodate the rod hanger. The wall trim shall be L Shape angle made of Aluminium 23mm X 23mm x 0.5mm having standard length of 3050mm with in ward bend. The item shall include providing markings and cutouts for electrical fixtures,sprinklers,smoke detectors,diffusers etc. on the ceiling and also providing & fixing templates in the ceiling made of 12mm BWR (boiling water proof) plywood. All material shall be of approved make. Measurements shall be considered wall to wall without any deductions. All works shall be complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – UM-IN-301 to UM-IN-305)
330
-
-
... More
ALUMINIUM METAL BAFFLE FALSE CEILING Providing & fixing of horizontal level suspended ceiling comprising of Vertical Linear Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063 T5. The baffle blade shall be in size of 100x25x3600mm in powder coated to Woodgrain/Plain finish (Red Oak, Cherry, Black & White).. The baffle shall be electrostatically polyester powder coated to a coating thickness of 60-80 micron. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for 1000hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation within a manufacturing batch shall be delta E1 using Excite/BYK Gardner instrument and gloss level 25±5 at 60˚ as per ASTM D523 (Not applicable of Wood Grain Shade). The baffle blade shall be suspended using Slotted U-profile of 20 x 30 x 3700mm (Thk-1.5mm) having slots in module of 25mm to keep baffles at an on-center spacing in multiples of 25mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps..SUSPENSION: Shall be hanged using baffle hanger from U-profile made of mild steel with powder coating thickness of 60-80 micron. The U – profile to comprise of alternate square & rectangular slots of 6.5x6.5mm & 28x6.5mm respectively on the web for locking the baffle hanger using plugin clip to secure the hanger in perfect position and achieve uniform spacing between baffles. The overall dimension of the U – profile is 20(W) x 30(H) x 3750(L) mm and is rolled form from 1.5mm thick mild steel with a powder coating thickness of 60-80micron. U- Profile to be connected to each other using U –Profile Splice. The U- profile shall be hanged from the true ceiling using threaded rod using a U- Profile hanger.
The Baffle along with suspension system used together shall carry a 10 year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The supply shall be backed by a Manufacturing Test Certificate. (Refer drawing number – UM-IN-301 to UM-IN-305)
125
-
-
... More
ELECTRICAL WORKS
-
-
-
... More
Supply and fixing of cable route marker 15 cms diameter of GI plate 6mm thick with inscription theron bolted or welded to 25mm x 25mmx 5mm angle iron 60 cms long and fixing the same in ground with PCC etc complete as required.
55
-
-
... More
Supply of following size of 3 core, HV, 33 KV grade, ISI mark, XLPE cable with stranded compact circular aluminium conductor, conductor screened with extruded semiconducting compound, XLPE insulated, insulation screned with extruded semiconducting compound in combination with copper tape(0.3 KA for 1Sec.) cores laid off,inner sheath of PVC tape,galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS:7098(Part II) with latest amendments. 3 Core 300 sq.mm
345
-
-
... More
Supplying and making Indoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 33 KV grade, complete as required. 33 KV, 3 Core x 240 - 400sq.mm
7
-
-
... More
Supplying and making Outdoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 33 KV grade, complete as required. 33 KV, 3 Core x 240 - 400sq.mm
1
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of grade exceeding 11 KV but not exceeding 33 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed lenghtwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. Soily strata
320
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of grade exceeding 11 KV but not exceeding 33 KV grade of size not exceeding 400 sq.mm direct in the existing masonry open duct. complete as required
25
-
-
... More
EXTERNAL ENCLOSURES Enamelled Danger board 440 Volts/11000 Volts / 33000 Volts : The Plate sholud be made from mild steel at least 1.6mm thick and vitreous enamelled white with Ketters, figures and convectional skull and bomes in signal res color on the front side.The rear side of the plate shall be enamelled.All letterin should be centrally spaced.The corners of the plates should be re=ounded offsize "250 x 200 mm".(as per drawing no. EE-II-3/2001, CEE/E490) Enamelled Danger board 440 Volts/11000 Volts / 33000 Volts
4
-
-
... More
Construction of manhole rectangular in shape including cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) foundation thickness of concrete 20cms and offset 10cms on both sides and first class brick work with bricks class designation 100kg/sq.cm (wire cut bricks) cement mortar 1:3 (1 cement : 3 coarse sand) 23cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c / c in 20x 20x10cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished complete as per standard design. Inside size 0.60x0.60m and 0.60m deep (with medium duty DI manhole cover & frame of size 0.60x 0.60m weighing 90kgs ) including fixing with cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar.
15
-
-
... More
Construction of manhole rectangular in shape including cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) foundation thickness of concrete 20cms and offset 10cms on both sides and first class brick work with bricks class designation 100kg/sq.cm (wire cut bricks) cement mortar 1:3 (1 cement : 3 coarse sand) 23cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c / c in 20x 20x10cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished complete as per standard design. Inside size 0.90 x 0.60m and 1.00m deep ( with medium duty DI manhole cover & frame of size 0.90x 0.60m weighing 105 kgs including fixing with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar.)
6
-
-
... More
Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete. 150 mm Dia.NP2 Class
10
-
-
... More
Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete.300 mm Dia.NP2 Class
280
-
-
... More
Metering Kiosk ( HT Side) Supplying, erecting, testing and commissioning 33 KV HT metering cubicle (compact type) approved by licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos CT having required ratio between 50/5A to 200/5A, VA10 or 15, Class 0.2S, epoxy casted 3 nos PT having ratio 33000/V3/110/V3 VA 50, Class 0.2 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation .And Supply, installation, testing and commissioning of Trivector meter , Class0.2s, three phase, 3/ 4 wire, 110/240V, in polycarbonate or sheet steel body ( base mounting type) with counter display/LCD display, tested by MRT along with Test Certificates, complete as required of following capacity of make L & T (ER300P) only: 1A/5Amps.
2
-
-
... More
LBS/RMU 3 WAY RMU, 11 KV, 630A, 21 kA 3Sec, SF6 Outdoor RMU - 3LBS a. Extensible/Non Extensible Three (3) Motor operated load break switches (LBSs) with Manual operated earthing switches in SF6 SCADA Compatible and base channel. Battery charger along with batteries required for Electrical operations of RMU is in the scope of the Bidder. Each module shall consist of VPIS, FPI in LBS Module (N- l) but not less than l no's per RMU. Suitable arrangement for mounting FRTU, modem or Ethernet Switch/LIU along with battery, battery charger shall be provided in RMU. Auxiliary PT as per specification shall be provided in RMU.
1
-
-
... More
Transformer and Substation accessories Supplying and Erecting approved make Outdoor compact substation with 1600 kVA, 3 phase, 50 Hz. ONAN type , 33kV,630 A 25 kA for 3 sec. SF6 insulated non-extensible compact switchgear consisting of one no direct cable module and one no fixed manual vacuum circuit breaker in SF6 insulated stainless steel enclosure, with series trip, self powered microprocessor based numerical over current relay (IDMTL + Inst.) protection. interconnection between HT switchgear and transformer shall be using 1Cx3x300 sq.mm aluminium XLPE Unarm. cable. Copper wound transformer 1600 kVA 33 kV/ 433V DYn11 oil filled, indoor type transformer bushings, hermetically sealed transformer with corrugated wall, using type A winding insulation (kraft paper), without gas cushioning ,without conservator type of design & top normal porcelain bushings for HT & LT with On load tap switch of rating +5% to -15% @1.5%. temp rise - oil/winding 40/45°C losses (subject to IS 1180) (energy efficiency level 1-Amendment 4) - max @ 50% loading : as per IS 1180 and max @ 100% loading : as per IS 1180 and impedance as per IS 1180 with LV panel-2500 amps aluminium busbar ( 100% for phase and 50% for neutral, current density - 1amp/sqmm) with outgoings 1 no. 3200 A + 1 no. 2000 A 433V 4P 50Hz 50 kA, fixed manual type air circuit breaker (ACB) with microprocessor based release for overload , short circuit & earth fault protection. multifunctional meter with class 1.0Accuracy with RS 485 Port, RYB, ON/OFF trip indications, LT Check meter DLMS type Class 1 with CAMR MODEM ,LT CT ratio 2500/5A , Class 1 MRT Tested ,4 nos of lamp suitable to 18/20 watt LED batten type 2 ft. with wiring shall be provided inside CSS and controlled by 6 A switchgear any reputed make, Space Heater with Thermostat , Door limit Switch, Fan etc. Accessories: PRV with contacts, DGPT2 Relay, WTI with alarm & Trip contacts, Marshaling Box, OLTC & RTCC with AVR, BUCCOZ RELAY and consider any other accessories required as per IS 1180 & 2026 latest.Price includes 800kVAR APFC Panel on built in LT side-Contactor Logic ,MCCB,CU Reactors,APP Capacitor.) Outdoor enclosure having IP54 degree of protection for HT & LT switchgear compartment & IP23 degree of protection for transformer compartment, powder /colour coated enclosure, with interconnection between HT switchgear & transformer using 1Cx3x300 Sq.mm XLPE aluminium single core cable. interconnection between transformer & LT switchgear using aluminium busbars. internal earthing connections by
using 75x6 mm GI strips including transformer neutral, complete with necessary permissions of Electrical Inspector ,With all Accessories.
1
-
-
... More
Supplying and erecting fencing of section having size at least 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete with provided earthing.
24.17
-
-
... More
Supplying and erecting double leaf hinged door each 1500 mm in width x 2450 mm in height using B class GI pipe, hinges and angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation and painted complete
4
-
-
... More
Providing & Fixing of printed instruction chart for (with minimum 700 x 1000 mm in size) treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete
2
-
-
... More
Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working upto 33 kV supply complete.
2
-
-
... More
Supplying and fixing standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, antiseptic solution, etc. (All above contents shall be of standard makes)
5
-
-
... More
Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 having 2 mm thickness upto 3.3 kV
56
-
-
... More
Supplying shockproof leather safety shoes of electrical grade of standard size as IS :11226, 14544 duly tested, with necessary test certificate from manufacturer.
2
-
-
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
100
-
-
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. 32 mm
2767.1
-
-
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. 40 mm
10
-
-
... More
DG SET Supplying, erecting, testing and commissioning of diesel generating set with alternator of 750 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 126.4 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables,Space heater,battery & charger ,etc the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet(with required logic), sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 990 ltr etc., on provided M20 grade CC foundation and obtaining necessary approval from Electrical Inspector.
2
-
-
... More
b.Manifolded Exhaust piping raised upto 25 meter.
c.Structural chimeny 25 meter tall complete with ladder,Check points ,platform Meter,aviation obstruction light, lightening arrestor with earth pits,all accessories required as per GSPCB/CPCB .
1
-
-
... More
Supply ,Installation,Testing & Commisioning of Electric Barrel Pump with below specifications
*Pump Body in M. S. Chrome and impeller in P. P. For Lub Model *Suitable for 2' Bung-Hole container
*Pump tube Length: 700 mm, 1000 mm, and 1250 mm.
*Viscosity of Liquid Max.: 500 cp.
*Pumping type: submerged, self-priming
*Temperature of Liquid Max.: 60°C
*Discharge: 80 lit./min.
*Discharge Flow 60-70 lpm ,
*Discharge Pressure 10 m water column
*Delivery Head: up to 9 metres (25 ft.)
*Electric Motor: Single Phase, 400 W (LUB) , Universal Motor, operating on 230 V, 50 Hz, AC supply.
*Also available in Air(Pneumatic) motor drive
*Shock Proof and chemical resistant body.
*Suitable for intermittent operation.
1
-
-
... More
Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark, of approved brands including accessories and providing masonry enclosure with CI/RCC cover having locking /Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size not less than 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size not less than 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately). In soily strata
24
-
-
... More
Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately). In soily strata
55
-
-
... More
Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement(plumbing will be paid seperately). In soily strata
4
-
-
... More
Extra for using salt and charcoal for pipe earth electrode as required ( 65 Kgs of Charcoal and 5 Kgs of Salt).
24
-
-
... More
Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt)
59
-
-
... More
Providing and fixing 6 SWG dia GI wire on surface or in recess for loop arthing, as required
6936
-
-
... More
Supplying and laying 25 mm x 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required
1
-
-
... More
Supplying and laying 25 mm x 6 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required
1880
-
-
... More
Supplying and laying 25 mm x 5 mm copper strip in 40 mm dia GI pipe from earth electrode as required
64
-
-
... More
Providing and fixing 25 mm x 5 mm copper strip on surface r in recess for coneections etc. as required
50
-
-
... More
Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required
1
-
-
... More
Supplying and laying 32 mm x 6 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required
1
-
-
... More
Providing and fixing 32 mm x 6 mm GI strip on surface or in recess for coneections etc. as required
1
-
-
... More
Supplying and laying 50 mm x 6 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required
550
-
-
... More
Providing and fixing 50 mm x 6 mm GI strip on surface or in recess for coneections etc. as required
1
-
-
... More
Supplying and laying 75 mm x 6 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required
60
-
-
... More
Providing and fixing 75 mm x 6 mm GI strip on surface or in recess for coneections etc. as required
1
-
-
... More
Providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for connections etc as required
60
-
-
... More
SITC Ligthing Protection System IS/IEC-62305 Roof - Horizontal Air Termination Air-termination Rod of material AlMgSi having length - 1000 mm, and
Ø10mm with base -30 Nos. Air-termination Rod having length - 3000 mm, Ø16mm with 2 Nos of side wall clamps to fix Air Termination Rod along with Air-termination rod clamp, 2 Nos of parallel clamp with StSt hardwares .-3 Nos. Horizontal Aluminium Roof Conductor, of Diameter Ø8mm, Cross-section- 50 mm2, of Material- AlMgSi .-860 m ELTECH® Conductor holder for Parapet wall/Side wall of Material- StSt, for rod size ø8-ø10 mm with accessories Screw and Gitty -452 Nos. Roof Conductor holding clamp of material StSt to be installed only on SDS type Metal Roof -408 Nos. Al Expansion Pieces for equalizing temperature related length changes
(every 20m for the mesh on the roof) -23Nos. Straight splicer with StSt hardwares suitable for Ø 8mm , to conduct two conductors, Round to Round, which are laid in line either on roof or on vertical walls -68 Nos.TXL Connector with StSt hardwares suitable for Ø 8mm, to conduct two conductors, Round to Round, which are laid acrooss.Also to hold down conductors connected from roof conductors -60Nos. Vertical Conduction Vertical Aluminium Down Conductor, of Diameter Ø8mm, Cross-section-
50 mm2, of Material- AlMgSi -1109 m Conductor holder for Parapet wall/Side wall of Material- StSt, for rod size ø8-ø10 mm with accessories Screw and Gitty -1109 Nos. Straight splicer with StSt hardwares, to conduct two conductors, Round to
Round, which are laid in line either on roof or on vertical walls-56 nos. Disconnecting clamp with StSt hardwares suitable for flat size upto 25 X 6
mm conductor & Round Conductor dia 8 mm -42 Nos. StSt Saddle / Holder for 25x6 mm to hold GI Strip -84 nos. Lightning Flash Counter -1 No. Link to Earth Grid Ring GI flat (25x6mm) Strip. Having width- 25mm, Thickness- 6mm, Material- Hot dipped Galvanized Iron, Cross Section- 150 mm2 Coating thickness- Avg. 70 microns -224 m Earthing & Grid Link to Earth Grid Ring GI flat (25x6mm) Strip. Having width- 25mm, Thickness- 6mm, Material- Hot dipped Galvanized Iron, Cross Section- 150 mm2 Coating thickness- Avg. 70 microns (for Interconnecting Earth Pits) -590 m TXL Connector with StSt hardwares, to connect two flat conductors which are laid acrooss with clamping range Flat size of 25X6 mm & Flat size of 25X6 mm -48 Nos.Universal Clamp with StSt hardwares to terminate the earth electrode & connect to grid conductor -6 Nos.
1
-
-
... More
LT Panels Supply Installation, testing and commissioning of DG SYNCH Panel + C/O Panel comprising below points.
1)-Panels shall be fabricated out of 16/14 swg CRCA sheet steel, with necessory structural supports in form of structural steel sections. 2)-Floor mounted, IP-65 degree protection, Top or bottom cable entry/exit as per the case steel, 2mm frame, 1.6 mm compartments & powder coating paint 3)-The panel shall be compartmental, Form 3B type, with suitable size of bus bar and separate cable and busbar chambers. 4)-Proper gland size holes to be provided by the manufacturer with proper sticker and danger sign on all sides of panel. 5)-The cable chambers shall be free from any live open connections and minimum cleareance to be provided for termination.
6) Bus-Bar Selection- Current Density- 1 Ampere/1 Sq.mm (IS-8623 for factory built assembly). 7)- Earthing terminal at both end.
9)Powder coating of approved color shade on both sides of provided iron work / MS / CRCA sheet steel work complete including anti-rust treatment in an approved manner. 8)All Starters are according to Type-II Cordination Refer Single Line Diagram for more details. Supply Installation, testing and commissioning of LT Panels comprising below points. 1)-Panels shall be fabricated out of 16/14 swg CRCA sheet steel, with necessory structural supports in form of structural steel sections. 2)-Floor mounted, IP-54 degree protection, Top or bottom cable entry/exit as per the case steel, 2mm frame, 1.6 mm compartments & powder coating paint 3)-The panel shall be compartmental, Form 3B type, with suitable size of bus bar and separate cable and busbar chambers. 4)-Proper gland size holes to be provided by the manufacturer with proper sticker and danger sign on all sides of panel. 5)-The cable chambers shall be free from any live open connections and minimum cleareance to be provided for termination.6) Bus-Bar Selection- Current Density- 1 Ampere/1 Sq.mm (IS-8623 for factory built assembly).7)- Earthing terminal at both end. 8)All Starters are according to Type-II Cordination Refer Single Line Diagram for more details.9)Powder coating of approved color shade on both sides of provided iron work / MS / CRCA sheet steel work complete including anti-rust treatment in an approved manner.
1
-
-
... More
HVAC Main Panel
1
-
-
... More
Metering Panel 1A
1
-
-
... More
Metering + Common Panel 1B
1
-
-
... More
Metering Panel 2A
1
-
-
... More
Metering + Common Panel 2B
1
-
-
... More
Common Panel Part 1
1
-
-
... More
Common Panel Part 2
1
-
-
... More
Supplying, erecting, testing & commissioning of ceiling or wall mounting type
3200A Capacity (50 kA SC for 1 Sec)at 40 degree celsius ambient temperature sandwich type
aluminium conductor tin plated at joints /aluminium conductor Silver flashed copper bimetal contact having purity not less than 99.6% suitable for (3L+ N) 415V, 50 Hz A.C supply with 100% neutral+ enclosure as integral earth (PE) with Outdoor /IP66 protection+ Canopy, 65/80 kA short circuit rating for 1 sec, insulation class F (155 degree celsius), casing made of minimum 1.5 mm hot / electrogalvanized /epoxy powder coated steel sheet enclosure with required shade of paint having
mechanical strength certification of minimum IK10, overall cross sectional area not more than 0.0280 sq Mtr, complete assembly must comply to seismic zone 4, with necessary accessories like suspension bracket, wall bracket holder/ fixing accessories as per site requirement with horizontal / vertical G.I. supports at required interval with external double run 75x6mm Aluminum earthing strip or internal integral earth complete conforming to IEC 61439-6, With all related accessories complete.(With necessary joints,elbow joints & expansion joints and bends,adopter box and copper flexible for joints etc)
35
-
-
... More
Supplying & erecting three phase, 415V, street light control panel upto the max load of 6kW, TPN MCB 40A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54, IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation
1
-
-
... More
Supplying & erecting three phase, 415V, street light control panel upto the max load of 12kW, TPN MCB 63A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54, IK10 protection suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation
1
-
-
... More
SITC of Terrace HVAC panel for the Chiller Plant Busbar Box for chillers Complete with Aluminium busbar, IP44 Protection (Indoor Use), RAL7035 Shade. This Box is used in between chiller main panel and chiller Main Panel for 1 Incoming Feeder with ACB and Outgoing Feeder 19 Nos. 3 Nos. Water cooled chiller (2W+1S) , 3 Nos. For Condenser Water Pumps (2W+1S), 3 Nos. For Primary Water Pumps (2W+1S) , 3 Nos. For secondary Water Pumps (2W+1S), 3 Nos.for Cooling Towers (2W+1S), 2 No. Vacant (Spare), Suitable rating MCB Compartment for Motorised Butterfly Valves, combo gauges power supply, Spare etc. The Panel shall be IP - 44 Protection for Indoor use complete with Panel Intelligent meter, R-Y-B indication Lights, Control Fuses & Copper tinted Bus Bar. All Pump Feeders complete with Star Delta Starters, MPCB Push Buttons indication ON/OFF / Trip lights etc. VFDs with by-pass arrangement to be provided for 3 Nos. Secondary Pumps , 3 Nos. for Condenser pump and 3 Nos. VFD for Cooling tower fan. Contactor to be added for the VFDs. For 15kW & above motors, digital CT operated ammmeter shall be provided Panel should also be complete with 230 V Supply for 1 No. BMS Panel, 230 V AC Switch Socket as spare. Panel shall be BMS Compatible for Hard & VFD Soft Points.
1
-
-
... More
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 25 sq.mm
45
-
-
... More
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 120 sq.mm
750
-
-
... More
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 300 sq.mm
3310
-
-
... More
Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 4 sq.mm
3953
-
-
... More
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 4 sq.mm
5
-
-
... More
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 6 sq.mm
265
-
-
... More
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 16 sq.mm
4011
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata
2276.5
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable)and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata
20
-
-
... More
Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata
1976.5
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 400 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required
3220
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required
4091
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm on surface, etc. complete as required
930
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 x 4 Sq. mm.
750
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 x 4 Sq. mm.
2
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 x 6 Sq. mm.
14
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 x 16 Sq. mm.
188
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (1) 3 1/2 x 25 Sq. mm.
4
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (6) 3 1/2 x 120 Sq. mm.
6
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (11) 3 1/2 x 300 Sq. mm.
68
-
-
... More
Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 150mm width x 50mm depth
250
-
-
... More
Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 200mm width x 50mm depth
475
-
-
... More
Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300mm width x 50mm depth
750
-
-
... More
Supplying and Installing following size perforated type 14 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 450mm width x 50mm depth
500
-
-
... More
Supplying and Installing following size perforated type 14 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 600mm width x 50mm depth
220
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 150mm width x 50mm depth (16 SWG)
65
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 200mm width x 50mm depth (16 SWG)
10
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300mm width x 50mm depth (16 SWG)
10
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 450mm width x 50mm depth (14 SWG)
10
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 600mm width x 50mm depth (14 SWG)
10
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray reducers of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 150mm width x 50mm depth (16 SWG)
3
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray reducers of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 200mm width x 50mm depth (16 SWG)
3
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray reducers of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300mm width x 50mm depth (16 SWG)
3
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray reducers of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 450mm width x 50mm depth (14 SWG)
3
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray reducers of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 600mm width x 50mm depth (14 SWG)
3
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray tees of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 150mm width x 50mm depth (16 SWG)
1
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray tees of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 200mm width x 50mm depth (16 SWG)
1
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray tees of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300mm width x 50mm depth (16 SWG)
1
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray tees of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 450mm width x 50mm depth (14 SWG)
1
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray tees of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 600mm width x 50mm depth (14 SWG)
1
-
-
... More
Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware.
250
-
-
... More
Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG GI sheet of 200 mm width & 20 mm height complete with necessary hardware.
475
-
-
... More
Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG GI sheet of 300 mm width & 20 mm height complete with necessary hardware.
750
-
-
... More
Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG GI sheet of 450 mm width & 20 mm height complete with necessary hardware.
500
-
-
... More
Providing & erecting hot dipped galvanised cover suitable for
ladder/perforated type Cable tray manufactured from 18 SWG GI sheet of 600
mm width & 20 mm height complete with necessary hardware.
220
-
-
... More
Supplying and erecting of 4.2 m high Decorative pole with Base plate, body made of extruded aluminium tube (grade 6063) with aluminium components and SS fasteners., foundation bolts including all necessary accessories Prewired with LED driver and suitable for operating on 240V,50Hz single phase ac supply,(such as IP 65 Cable loop box/ JB, 15A input output connector, 16A C-Curve, SP MCB) Except foundation.Included light fitting 2x18W & 50W,Ip66,Luminaires can be supplied in different Bespoke design.
61
-
-
... More
Supplying and erecting Outdoor type(IP65) 3 W LED Focus light fitting ,24VDC, die-cast aluminum housing,suitable watts driver, / power supply (if any),including gear box .Complete with all accessories and Coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint .
56
-
-
... More
Supplying and erecting Outdoor type(IP65) 6W LED UP Down wall light fitting having Extruded and Die cast aluminium housing with high corrosion resistance surface finish with Integral control gear ,and with all necessary accessories .
66
-
-
... More
Supplying and erecting Outdoor type(IP65) 12 W LED Tree uplighter fitting ,24VDC, die-cast aluminum housing,suitable watts driver, / power supply (if any),including gear box(With spike) .Complete with all accessories and Coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint .
58
-
-
... More
Supplying and erecting Outdoor type 12W LED,Ip54, wall light fitting having Extruded and Die cast aluminium housing with high corrosion resistance surface finish with Integral control gear ,and with all necessary accessories .
5
-
-
... More
Supplying and erecting Concealed type foot/step light Max. 6W having IP67. IK10 rated Pressure die cast housing having system , min. efficacy of 100 lumen/W, CRI80, CCT upto 5000K, Beam Angle of 110 deg., THD10%, SDCM5, p.f. 0.95, operating range of 230-270V, surge protection of 2.5 kV, Life class of 25,000 Hrs. at L70B50, including driver by making necessary arrangement/recess in wall to make it flush with surface .
41
-
-
... More
Supplying & Installation of 6 mt high galvanised Decorative pole with 114mm dia. having Single arm decorative bracket complete with Base plate, foundation bolts including all necessary accessories ,such as IP 65 Cable loop box/ JB, 15A input output connector, 16A C-Curve, SP MCB,Except foundation with integrated LED street light fitting 40W IP65 & IK08 class having single piece pressure die-cast aluminium housing, , min. efficacy of 150 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete.
25
-
-
... More
Supplying & Installation of 6 mt high galvanised Decorative pole with 114mm dia. having Double arm decorative bracket complete with Base plate, foundation bolts including all necessary accessories ,such as IP 65 Cable loop box/ JB, 15A input output connector, 16A C-Curve, SP MCB,Except foundation with integrated LED street light fitting 2 nos. 40W IP65 & IK08 class having single piece pressure die-cast aluminium housing, , min. efficacy of 150 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete.
7
-
-
... More
Supplying and erecting Outdoor type 4 x 2 W LED Under water light fitting , die-cast aluminum housing,suitable watts driver, / power supply (if any),including gear box .Complete with all accessories and Coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint .
23
-
-
... More
Supplying & Installation of 9 mt high galvanised Decorative step pole with 114mm dia. having suitable decorative bracket complete with Base plate, foundation bolts including all necessary accessories ,such as IP 65 Cable loop box/ JB, 15A input output connector, 16A C-Curve, SP MCB,Except foundation with integrated LED flood light fitting 4 nos. 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing , min. efficacy of 100 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete.
6
-
-
... More
Supplying and erecting Outdoor type 25W LED,Ip65, Canopy Light fitting/cylindrical Surface light fitting having Extruded and Die cast aluminium housing with high corrosion resistance surface finish with Integral control gear ,and with all necessary accessories .
14
-
-
... More
SITC of 24W IP 66 linear monochromatic wall grazer with multi angle lens light fitting with driver complete.
3
-
-
... More
Supplying and erecting integrated LED flood light fitting Max. 100W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty with bracket for wall mounting.(For Wall Illumination- 2 sides)
12
-
-
... More
SITC of Cable Junction Boxes IP 66/67 “weather proof”(Size -155 x 210 x 92 (LXBXH)mm + Cable termination upto 16 Sqmm size.), for outdoor installation(with knockouts for cable entry) with all accessories.
144
-
-
... More
SITC of Facade Lighting
1
-
-
... More
Supply, installation, testing and commissioning of Under floor HDG GI Race Ways,2mm thickness ,with cover 2mm thickness of below suitable sizes. 50 X 50 X 38 MM
300
-
-
... More
Supply, installation, testing and commissioning of Under floor HDG GI Race Ways,2mm thickness ,with cover 2mm thickness of below suitable sizes. 100 X 100 X 38 MM
100
-
-
... More
Supply, installation, testing and commissioning of 2mm thickness HDG/powder coated GI JUNCTION BOX with cover of below suitable sizes. 150 X 150 X 50 to 70 MM
32
-
-
... More
Supply, installation, testing and commissioning of IP 66 Floor box - 4 module(Include 6/16 A Switch & Socket,Blank Plate) ,Auto adjustable back box for installing IP66 floor boxes in concrete floors; supplied with cover; accepts conduit dia 20/25mm; min. screed height 65 mm ,IP55 cable exit acessory.
20
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C -- with Cat A Modular Accessories
259
-
-
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with 2 way modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. with Cat A Modular accessories
2
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)
2327.2
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit)
1363
-
-
... More
Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
1228
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required 5/6 A switch Cat A
77
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required 15/16 A switch Cat A
126
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required 3 pin 5/6 A socket outlet Cat A
77
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required 6 pin 15/16 A socket outlet Cat A
126
-
-
... More
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (a) 1 or 2 Module ( 75 mm x 75 mm) Cat A
2
-
-
... More
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (b) 4 Module ( 125 mm x 7 mm) Cat A
185
-
-
... More
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (c) 6 Module (200mm x 75 mm) Cat A
8
-
-
... More
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (d) 8 Module ( 125 mm x 125 mm) Cat A
32
-
-
... More
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (e) 12 Module (200 mm x 150 mm) Cat A
1
-
-
... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required Cat A
50
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc. as required Cat A
185
-
-
... More
20 mm dia GI pipe heavy class
75
-
-
... More
Supply and erecting of 48 inch (1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. Cat A
50
-
-
... More
Supply and erecting S type Stainless Steel fan hook fabricated out of 10 mm round bar complete as required.
50
-
-
... More
Supplying and fixing following way SPN sheet steel MCB distribution board Consumer Unit 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar hinged front acrylic cover for the MCB knobs detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) 2 + 8 way Cat A
1
-
-
... More
Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) 8 way (8+24), double door, Horizontal type Cat A
24
-
-
... More
Supplying and fixing following way TPN sheet steel, double door, Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)interconnection between incomer MCB and busbars of following ways (but without MCBs as required) 8 way (8+24), double door, Vertical type, Cat A
53
-
-
... More
Supplying installation testing and commissioning of surface/ recess mounting vertical type 415 V TPN, double door MCB DB of sheet steel dust protected duly phosphatised and powder painted inclusive of 200 A tinned copper busbar common neutral link earth bar din bar for mounting MCBs detachable gland knock out plate and with 250 A 10 KA MCCB as incomer interconnection between incomer MCCB and busbars of following ways (but without MCCB/MCBs as required) 8 way with 250A MCCB as Incomer double door Cat A
1
-
-
... More
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. SP, Cat A
1536
-
-
... More
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. TP, Cat A
104
-
-
... More
Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. TPN, Cat A
13
-
-
... More
Supplying and fixing 63 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. TPN, Cat A
54
-
-
... More
Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required \40 A, Cat A
1
-
-
... More
Supplying and fixing following rating four pole (triple pole and neutral) 415 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required 40 A, Cat A
12
-
-
... More
Supplying and fixing SP blanking plate in the existing MCB DB complete as required.
90
-
-
... More
Supply & Installation of Table POP UP BOX, 8M-1No. -6A Switch & Socket -POWER & 1No. -6A -Switch & Socket -UPS , 1HDMI ,1DATA, with all accessories complete.
2
-
-
... More
Supply & Installation of Table POP UP BOX, 8M-1No. -6A -Switch & Socket -POWER & 1No. -6A -Switch & Socket -UPS ,1DATA,Blank Plates, with all accessories complete.
2
-
-
... More
Supply & Installation of Table POP UP BOX, 8M- 1No. -6A -Switch & Socket -UPS , 1HDMI Splitter, Blank Plates , with all accessories complete.
2
-
-
... More
"Supply, Installation,Testing, Commissioning of 1 Nos. 20 kVA - Online UPS (--- VDC - With Isolation Transformer ) Pure sine wave Double conversion 400V AC In/400 V Out
AC out UPS 15 minutes back up for each( Battery set with Interlinks set & battery rack)
Suitable to operate from Grid & DG set & with 100% phase unbalance & phase reversal
Static bypass IGBT advance rectifier charger 6 IGBT PWM DSP inverter with step load 100%,
all Protective features, LCD display with scroll buttons for Status & Error/Alarm alphanumeric messages
RS 485 port for BMS
Factory testing to ISO 62040 part III
Battery for UPS 15 min discharge as the per case, comprising 12 V AGM-SMF cells placed on structural steel multitier battery stand, duly epoxy primer +intermidiate +final coat of epoxy paint in dry film thickness of 100 micron & finished in polyeurathane paint in 30 micron complete with intercell connectors, Insulating mat, spanner, thermometer etc.
-- AH --- VDC ."
1
-
-
... More
Supplying and erecting Bulk Head LED fitting Max. 10-12W with high transitivity diffuser with system lumens output of Min. 1100 lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., THD0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50, IP66, IK09 rated including driver IP66, IK09 rated on provided PVC Block / wooden board with minimum 3 years warranty.
23
-
-
... More
Supplying,installation,testing,commisioning of Deep Recessed LED COB Tiltable Downlighter UGR19 and beam angle 15 to 65° made up of pressure die cast aluminum housing with high efficiency, faceted clear surface, LED minimum efficacy at System level approx 120 lumens/watt & wattage 6 W, Life of fixture : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 3000/4000/6000K, CRI Ra =80, PF 0.9, an Operating working temp range 0°C Ta 45°C & operating Voltage Range of 140-270 V AC. Minimum Internal Surge Protection 2.5KV. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver should have separate BIS approval. Warranty-3 yrs. ,having mounting arrangement with board for surface type or spring loaded mounting clips complete.
1
-
-
... More
Supplying and erecting LED Strip light Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI80, CCT upto 5000K, Beam Angle of 110 deg., THD0.95, operating range of 230-270V, Life class of 30,000 Hrs at L70B50 including driver with minimum 1 year warranty
50
-
-
... More
Supplying,installation,testing,commisioning of Deep Recessed LED COB Downlighter UGR19 and beam angle 15 to 65° made up of pressure die cast aluminum housing with high efficiency, faceted clear surface, LED minimum efficacy at System level approx 120 lumens/watt & wattage 15-18 W, Life of fixture : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 3000/4000/6000K, CRI Ra =80, PF 0.9, an Operating working temp range 0°C Ta 45°C & operating Voltage Range of 140-270 V AC. Minimum Internal Surge Protection 2.5KV. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver should have separate BIS approval. Warranty-3 yrs. ,having mounting arrangement with board for surface type or spring loaded mounting clips complete.
92
-
-
... More
Supplying and erecting LED square / circular Max. 12 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser , min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clipscomplete with 3 years warranty.,having mounting arrangement with board for surface type or spring loaded mounting clips complete.
96
-
-
... More
Supplying and erecting LED square / circular Max. 18 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser , min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clipscomplete with 3 years warranty.,having mounting arrangement with board for surface type or spring loaded mounting clips complete.
831
-
-
... More
Supplying,installation,testing,commisioning of suspended Decorative Chandelier suitable for Atrium Lobby,60W x 15 Nos. Light Fittings.
13
-
-
... More
Supplying and erecting Profile flexible LED tape,Colour-WW/CDL/NW,5000 x 5 x 0.2 mm upto 1000 lumens /meter of any colour with driver & all related accessories complete.
50
-
-
... More
Supplying,installation,testing,commisioning of 20W Surface/Suspended Linear Light,1200 mm Length,60/75 mm Width with min 100 or higher lm/ Watt comprises of Extruded Aluminium housing with PMMA Diffuser,CCT-4000/5700/6500K, Aluminium End Caps/cable and Mounting arrangement - surface mounted or suspended arrangement , along with all the necessary accessories ..(With Jointing Kit/Connector & Cable)
1
-
-
... More
Supplying & erecting LED 18-20W tube light fitting (4 feet) with polycarbonate housing,efficacy=100 lm/w, heat sink, integrated HF electronic driver complete.
276
-
-
... More
Supplying,installation,testing,commisioning of 15-20W COB LED Track Light in pressure diecast housing ,1500lm/WW,CW, NW with 1 m track , and all accessories.
410
-
-
... More
Supplying & erecting UV Fly killer/ bug catcher Light Fitting having 2 x 20W UV Tube Lights to cover min. area of 500 sq.ft with powdered coated M.S./ steel body suitable to work on 230V, AC Supply having top mounting arrangement with SS chain complete and 3 core 1 mtr. flexible wire .
4
-
-
... More
LIFT AND ESCALATOR WORKS
-
-
-
... More
SITC of Electric Traction Service/Passenger Lift(1) with · Rated capacity :- 20 Passenger/1360Kg · Floors :- LG+UG+3 floors (5 Stops/5 Landings) · Travel :- 17.1 Mtrs · Location of Lift Machine:- MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 1100/1200 mm wide x 2000 mm
high · Clear Car size of ......mm wide x ......mm deep x 2250mm high · Lift shaft available having clear size of 2300mm wide x 3000mm deep, 1800mm Pit depth, 4800mm Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.25mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.25mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights(Automatic), blower/fan(impulse and Automatic) for ventilation & Granite flooring/PVC flooring/SS chequered plate flooring, Rear Side-handrails, Rear Side-mirror, emergency light etc. Full Height Infrared Curtain of light in the car.Car Door Lock.Nudging Service.Single Phase Failure Sensing Device.Attendant Service.Accurate Relevelling.The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.· Lift controller of Simplex full collective based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. ,various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.6mm CRCA sheet with powder coating with IP54 Protection class.· ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing/at Upper Ground floor.CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC .Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. . Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work.+C18 · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. · General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.
1
-
-
... More
SITC of Electric Traction Passenger Lift (2 & 3) with · Rated capacity :- 15 Passenger/1020Kg · Floors :- LG+UG+3 floors (5 Stops/5 Landings) · Travel :- 17.1 Mtrs · Location of Lift Machine:- MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 800/900/1000 mm wide x 2000mm
high · Clear Car size of ......mm wide x ......mm deep x 2250mm high · Lift shaft available having clear size of 2100mm wide x 3000mm deep, 1600mm Pit depth, 4800mm Overhead.· Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.25mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.25mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights(Automatic), blower/fan(impulse and Automatic) for ventilation & Granite flooring/PVC flooring/SS chequered plate flooring, Rear Side-handrails, Rear Side-mirror, emergency light etc. Full Height Infrared Curtain of light in the car.Car Door Lock.Nudging Service.Single Phase Failure Sensing Device.Attendant Service.Accurate Relevelling.The lift car interior design shall be done as per the directions of engineer in charge.· COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.· Lift controller of Duplex full collective based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. ,various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.6mm CRCA sheet with powder coating with IP54 Protection class. ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing/at Upper Ground floor.CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC .Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. . Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work.+C18 · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. · General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.
2
-
-
... More
SITC of Electric Traction Passenger Lift (4 & 5) with · Rated capacity :- 15 Passenger/1020Kg · Floors :- LG+UG+2 floors+3rd floor Provision for future requirement/expansion (4 Stops/4 Landings) · Travel :- 12.6 Mtrs · Location of Lift Machine:- MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 800/900/1000 mm wide x 2000mm
high · Clear Car size of ......mm wide x ......mm deep x 2250mm high · Lift shaft available having clear size of 2100mm wide x 3000mm deep, 1600mm Pit depth, 4800mm Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.25mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.25mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights(Automatic), blower/fan(impulse and Automatic) for ventilation & Granite flooring/PVC flooring/SS chequered plate flooring, Rear Side-handrails, Rear Side-mirror, emergency light etc. Full Height Infrared Curtain of light in the car.Car Door Lock.Nudging Service.Single Phase Failure Sensing Device.Attendant Service.Accurate Relevelling.The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.· Lift controller of Duplex full collective based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. ,various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.6mm CRCA sheet with powder coating with IP54 Protection class. · ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing/at Upper Ground floor.CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC .Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. . Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work.+C18 · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. · General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.
2
-
-
... More
SITC of Indoor Escalator for Passenger (From Lower Ground to Upper Ground floor) in Upward direction (Mention escalator is adjacent to another escalator) *Vertical Rise – 3600 mm *Max. Load(Person Per Hour) -6000 to 8000 .*Drive System- VVVF Drive .*Degree of inclination -35 degrees .*Step width =1000mm. *Pit at lower end of escalator =1150 to 1200 mm from FFL. *Speed =0.5 m/s. *Horizontal Step- 2 flat steps * 415V, 50Hz,Three Phase Supply,5.5 or higher kW Motor and 220/240V, 50Hz,Single Phase Supply,2.2kVA Illumination Power(For Skirting & Handrail Illumination -Includes Comb lighting). *Handrail in stainless steel finish(with Colour options).* Balustrade Profile/Cladding-S.S. Hairline Finish *Balustrade Panel - Tempered Safety Glass 10 mm *Balustrade height -1000 mm
1
-
-
... More
SITC of Indoor Escalator for Passenger (From Upper Ground to Lower Ground floor) in Downward direction (Mention escalator is adjacent to another escalator) *Vertical Rise – 3600 mm *Max. Load(Person Per Hour) -6000 to 8000 .*Drive System- VVVF Drive .*Degree of inclination -35 degrees .*Step width =1000mm. *Pit at lower end of escalator =1150 to 1200 mm from FFL. *Speed =0.5 m/s. *Horizontal Step- 2 flat steps * 415V, 50Hz,Three Phase Supply,5.5 or higher kW Motor and 220/240V, 50Hz,Single Phase Supply,2.2kVA Illumination Power(For Skirting & Handrail Illumination -Includes Comb lighting). *Handrail in stainless steel finish(with Colour options). * Balustrade Profile/Cladding-S.S. Hairline Finish *Balustrade Panel -Tempered Safety Glass 10 mm *Balustrade height -1000 mm
1
-
-
... More
SITC of Indoor Escalator for Passenger (From Upper Ground to First floor + From First to Second Floor + From Second to Third Floor ) in Upward direction *Vertical Rise – 4500 mm *Max. Load(Person Per Hour) -6000 to 8000 .*Drive System- VVVF Drive .*Degree of inclination -35 degrees .*Step width =1000mm.*Pit at lower end of escalator =1150 to 1200 mm from FFL. *Speed =0.5 m/s. *Horizontal Step- 2 flat steps * 415V, 50Hz,Three Phase Supply,5.5 or higher kW Motor and 220/240V, 50Hz,Single Phase Supply,2.2kVA Illumination Power(For Skirting & Handrail Illumination -Includes Comb lighting). *Handrail in stainless steel finish(with Colour options).* Balustrade Profile/Cladding-S.S. Hairline Finish *Balustrade Panel -Tempered Safety Glass 10 mm *Balustrade height -1000 mm
3
-
-
... More
SITC of Indoor Escalator for Passenger (From First to Upper Ground floor + From Second to First Floor + From Third to Second Floor) in Downward direction *Vertical Rise – 4500 mm *Max. Load(Person Per Hour) -6000 to 8000 .*Drive System- VVVF Drive .*Degree of inclination -35 degrees .*Step width =1000mm.*Pit at lower end of escalator =1150 to 1200 mm from FFL. *Speed =0.5 m/s. *Horizontal Step- 2 flat steps * 415V, 50Hz,Three Phase Supply,5.5 or higher kW Motor and 220/240V, 50Hz,Single Phase Supply,2.2kVA Illumination Power(For Skirting & Handrail Illumination -Includes Comb lighting). *Handrail in stainless steel finish(with Colour options). * Balustrade Profile/Cladding-S.S. Hairline Finish *Balustrade Panel - Tempered Safety Glass 10 mm *Balustrade height -1000 mm
3
-
-
... More
FIRE FIGHTING WORKS
-
-
-
... More
Supplying, installation, testing and commissioning of Main Fire Pump (MFP / EP) suitable for water discharge of 2280 LPM/ 137 CuM/Hr at 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 45 kW capacity for manual/ automatic operation and consisting of following:
(a) Horizontal type, single stage, centrifugal/ split casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.
(b) Squirrel cage induction motor, TEFC, synchronous speed 2900 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts, matching hardware, matching suction & delivery flanges/ gaskets, etc. as required.
(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete,
Refer Technical Specifications
1
-
-
... More
Supplying, installation, testing and commissioning of main fire pump suitable for water discharge of 2280 LPM at 70 m head driven by 70 HP or suitable HP capacity diesel engine at 2000 RPM working speed suitable for manual/automatic operation and consisting of following :
(a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.
(b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150 ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine , exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer,
instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required.
(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.
(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete.
1
-
-
... More
Supplying, installing, testing & commissioning of fabricated Diesel Engine Pump Fuel Oil Day Tank from 3 mm MS sheet and 24G secondary containment as per IS:2552 of 300 liters gross capacity & 250 liters fill capacity, externally painted with two coats of synthetic enamel paint over a coat of primer & internally with oil resistant paint. The tank shall be fitted with clear glass oil level indicator, inspection hole with cover, drain valve, air vent including structural supports (painted with approved shade) for tank and fill/ return/ drain connection valves, etc.
Refer Technical Specifications
1
-
-
... More
Providing & fixing, joining & testing, of heavy class-C M.S pipe IS:1239 marked in exhaust line of 100 mm dia. Diesel pump set, including cutting, welding etc. with MS butt welded fittings, providing clamp sand proper positioning of silencer and expansion bellows with nut-bolts as required, painting the finished pipeline with heat resistant Aluminum paint and providing lagging with 50 mm thick glass wool duly secured with chicken mesh and wire.
Refer Technical Specifications
10
-
-
... More
Supplying, installation, testing and commissioning of jockey fire pump suitable for water discharge of 180 LPM at 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW capacity for manual/ automatic operation and consisting of following :
(a) Horizontal type, multi stage, end suction, back pull out, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.
(b) Squirrel cage induction motor, TEFC, synchronous speed 2900 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.
(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete.
1
-
-
... More
Supplying, installing, testing & commissioning of GI ERW of 200 mm dia. pipe as per IS:3589, Grade FE410, including all fittings. including fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.
Refer Technical Specifications
Refer Technical Specifications
10
-
-
... More
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', including all fittings. including fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.
Refer Technical Specifications 150 mm dia
29
-
-
... More
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', including all fittings. including fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.
Refer Technical Specifications 100 mm dia
10
-
-
... More
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', including all fittings. including fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.
Refer Technical Specifications 80 mm dia
16
-
-
... More
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', including all fittings. including fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.
Refer Technical Specifications 50 mm dia
8
-
-
... More
Supplying, installing, testing & commissioning of Red Oxide primer (10 SqM per Ltr 25 micron DFT). For above ground piping, Application of including provision of hand tool for surface cleaning & brush for application of primer in 2 coats each of 25 micron DFT, satisfaction of Engineer-in-Charge.
5.8
-
-
... More
Supplying, installing, testing & commissioning of Synthetic enamel finish paint shade 536 in IS 5 (13.5 sqM per Ltr-25 micron). For Above ground piping. Brush for application of final paint compatible with primer in 2 coats each of 25 micron DFT, satisfaction of Engineer-in-Charge.
4.3
-
-
... More
Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge.
Refer Technical Specifications 200 mm dia.
2
-
-
... More
Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge.
Refer Technical Specifications 150 mm dia.
2
-
-
... More
Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge.
Refer Technical Specifications 80 mm dia
1
-
-
... More
Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge.
Refer Technical Specifications 50 mm dia.
1
-
-
... More
Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN 16 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 593 of following sizes. including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID.
Refer Technical Specifications 200 mm dia
2
-
-
... More
Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN 16 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 593 of following sizes. including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID.
Refer Technical Specifications 150 mm dia.
4
-
-
... More
Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN 16 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 593 of following sizes. including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID.
Refer Technical Specifications 100 mm dia.
3
-
-
... More
Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN 16 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 593 of following sizes. including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID.
Refer Technical Specifications 80 mm dia.
1
-
-
... More
Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN 16 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 593 of following sizes. including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID.
Refer Technical Specifications50 mm dia.
1
-
-
... More
Supplying, installing, testing & commissioning of double flange Non Return Valve PN 16 class of following sizes Conforming to IS: 5312 (Part-I), Universal mounting (Hroz/ Vert) having CI to IS 210Gr260 Body and Bronze IS318 Gr LTB Disc with nut bolts to IS 1363 PT1 Class 4.6, Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc. and tested to 1.5 times of working pressure in an approved manner, with tag nos as per P & ID.
Refer Technical Specifications 150 mm dia.
2
-
-
... More
Supplying, installing, testing & commissioning of double flange Non Return Valve PN 16 class of following sizes Conforming to IS: 5312 (Part-I), Universal mounting (Hroz/ Vert) having CI to IS 210Gr260 Body and Bronze IS318 Gr LTB Disc with nut bolts to IS 1363 PT1 Class 4.6, Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc. and tested to 1.5 times of working pressure in an approved manner, with tag nos as per P & ID.
Refer Technical Specifications 100 mm dia.
2
-
-
... More
Supplying, installing, testing & commissioning of double flange Non Return Valve PN 16 class of following sizes Conforming to IS: 5312 (Part-I), Universal mounting (Hroz/ Vert) having CI to IS 210Gr260 Body and Bronze IS318 Gr LTB Disc with nut bolts to IS 1363 PT1 Class 4.6, Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc. and tested to 1.5 times of working pressure in an approved manner, with tag nos as per P & ID.
Refer Technical Specifications50 mm dia.
2
-
-
... More
Supplying & installing gun metal Gate Valve of 50 mm dia. having threaded ends, conforming to IS: 778, ISI mark, along with G.I. threaded nipple.
Refer Technical Specifications
1
-
-
... More
Supplying, installing, testing & commissioning of PN 16 Cast Iron, factory made, flanged Y type strainer of 200 mm NB with SS 304 strainer having 3 mm holes with companion flange set of 2 flanges to IS 1538 and including welding of matching flange BS 10 Table D & providing fasteners to IS 1363 grade 5.6/8.8 & rubber gaskets to IS 2172 grade W/3 with standard OAR (open area ratio) for positive suction complete.
Refer Technical Specifications
2
-
-
... More
Supplying and installing Air Vessel of 300 mm dia and 1.5 mtr. in height M.S. Tank fabricated from M.S. black ERW pipe, conforming to I.S.: 3589, having 6 mm thickness, dish end at both ends, duly welded with 300 mm dia pipe, having inlet of 100 mm dia, duly fitted with 100 mm dia sluice valve and 20/25 mm dia draw in with G.M. gate valve, to be installed inside pump house along with provided M.S. angle (75 x 75 x 5 mm) tripod.
1
-
-
... More
Supplying, installing, testing & commissioning of GM body and inlet in CI, 2 way Fire Brigade connection with NRV of 7 kG/cm2 working pressure and test pressure 10.5 kG/cm2, Header of 100 mm dia, M.S. ‘C’ class pipe having 2 Nos. of 100 mm manifold for outlets with built in spring loaded NRV & 100 nb butterfly Isolation valve with 100 mm dia flange, fitted with 2 nos. of 63 mm diameter instantaneous male inlet connection is provided at street level and connected to Fire UG tank for draw out connection, complete with Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc
Refer Technical Specifications
1
-
-
... More
Supplying, installing, testing & commissioning of GM body and inlet in CI, 4 way Fire Brigade Inlet connection with NRV of 7 kG/cm2 working pressure and test pressure 10.5 kG/cm2, Header of 150 mm dia, M.S. ‘C’ class pipe having 4 Nos. of 150 mm manifold for outlets with built in spring loaded NRV & 150 NB butterfly Isolation valve with 150 mm dia flange, fitted with 4 nos. of 63 mm diameter instantaneous male inlet connection is provided at street level and connected to Fire UG tank for fill the tank, complete with Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc
Refer Technical Specifications
1
-
-
... More
Supplying, installing, testing & commissioning of UL/ FM approved Pressure Gauge of 100 mm dia., liquid filled 0-10 bar. Fitted with 15 mm dia. root cock valve, and G.I. pipe, elbow, snubber, process piping etc. as per requirement in an approved manner.
Refer Technical Specifications
4
-
-
... More
Supplying, installing, testing & commissioning of UL/ FM approved Pressure Switch for pump control with 2 NO + 2 NC contacts, 12/15 mm dia. process connection for 3Cx1.5 sqmm cable, operation range 0-10 bar, with 12/15 mm dia. root valve, G.I. nipple, elbow, snubber, process piping etc. in an approved manner.
Refer Technical Specifications
4
-
-
... More
Supplying, installing, testing & commissioning of UL listed analogue addressable false ceiling/ flush on roof slab mounted Multi-Sensor Photoelectric Smoke Detector 1.63%/ ft to 13%/ ft sensitivity 8 level setting cum heat smoke detector 630 C fixed element, 24V DC 300μA quiescent & 6.5 mA operated, status LEDs, Rotary switch/ DIP switch addressing including with mounting base wiring box, all cabling, glands & terminations, complete.
Refer Technical Specifications
2
-
-
... More
Supplying, installing, testing & commissioning of UL listed loop powered bidirectional Fault Isolator preferably detector base mounted, 20.5 V DC, 600 μA quiescent & 800 mA in fire conditions, installation on addressable loop after every 15 detectors/ devices for isolating shorted, dewired and loose circuits between two successive fault isolators with automatic resetting arrangement complete with base wiring box with cable glands, base etc.
Refer Technical Specifications
1
-
-
... More
Supplying, installing, testing & commissioning of Analogue Addressable UL listed Manual Pull Station/ Break Glass Unit, loop powered, 22V DC operating current, 600μA quiescent current with facility to programme the device from 01-159 with the help of dip/ rotary switches, complete with IP 24 housing with gland, Status LED for polling / fire condition etc.as required,Rotary switch/DIP switch hardware addressing installed in recess/ wall/ column including all cabling & terminations & glands.
Refer Technical Specifications
1
-
-
... More
Supplying, installing, testing & commissioning of Analogue Addressable UL listed Strobe Sounders, 95 dB at 1 M output with 2 volume & 3 tone settings @ 75mA cum strobe with 15-75-115 candela settings at 75mA, 1Hz flash / second, rendered preferably suitable for selective operation through powered loop powered (externally powered may be accepted) with 24 V DC supply, installed in recess/ wall/ column including all cabling & terminations, complete as required with housing & cable glands on mounting backbox etc.
Refer Technical Specifications
1
-
-
... More
Supplying, installing, testing & commissioning of UL listed analogue addressable loop powered Input Monitor Module 20.5 V DC, 700 mA operated & 600 μA quiescent, rotary/ dip switch address setting, installed in recess/ wall/ column including all cabling & terminations & base wiring box.
1
-
-
... More
Supplying, installing, testing & commissioning of UL listed analogue addressable loop powered Control Module 20.5 V DC min, 700 mA operated & 600 μA quiescent, rotary/ dip switch hardware address setting, installed in recess/ wall/ column including all cabling & terminations & base wiring box.
Refer Technical Specifications
1
-
-
... More
Supply, Installation, Testing & Commissioning of power supply unit (SMPS), 24V DC, 6A power supply for notification for Analogue Addressable System.
Refer Technical Specifications
1
-
-
... More
Supplying & installing of 1 Pair, 1.5 sqmm Cable for looping 300/500V, stranded annealed tinned copper, 7/0.53mm, twisted, PVC insulation type C of IS 5831, Mylar backed aluminum screened with 25% overlap & 100% screen Inner extruded ST-2 sheath, single armoured, PVC St-2 extruded outer sheath in Red colour with FRLS, to BS 5308, for Class A wiring.
50
-
-
... More
Supply of 2 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554 (Part I), IS:7098(Part I) with latest amendments of following size. ' 2 Core 1.5 sq.mm
20
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required
20
-
-
... More
Supply and making cable end terminations with compression gland and copper lugs for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. ' 2 Core 1.5 sq.mm
4
-
-
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
20
-
-
... More
Supplying & installing of ABC Powder Cartridge Portable Fire extinguisher 6 kg capacity (21B), 35 bar Test / 15 Bar working, 4.5 M throw, 20 second discharge time, Propellant CO2 in gas cartridge, charge as per IS 4308, MS sheet deep drawn steel cylinder, sqeeze grip brass control valve, AL syphon tube, Non metallic discharge nozzle, 450 mm long PVC braided hose, pressure gauge, hose holder, conforming to IS 15683 / IS 2190:2010, portable at appointed location on wall/ column mounted brackets, clamps & other accessories.
Refer Technical Specifications
1
-
-
... More
Supplying & erecting of CO2 type extinguisher, 4.5 kg capacity (21B), 250 Bar Test / 60 Bar storage, 2M min throw, 12 second discharge time, Propellant CO2 in gas cartridge, charge as per IS 15222, Seamless steel tube cylinder to IS 7285, sqeeze grip brass control valve to IS 3224, AL internal discharge tube, Poly Ethylene discharge nozzle, 450 mm long PVC braided hose, safety release, seal temper indicator, pressure gauge, hose holder & conforming to IS 15683 /IS 2190:2010. portable at appointed location on wall/ column mounted brackets, clamps & other accessories.
Refer Technical Specifications
1
-
-
... More
ELECTRICAL FIRE PANEL Supply, Installation, Testing & Commissioning of Fire LT Panels front operated dust and vermin proof power cum control panel comprising below points.
1)-Panels shall be fabricated out of 16/14 swg CRCA sheet steel, with necessory structural supports in form of structural steel sections.
2)-Floor mounted, IP-54 degree protection, Top cable entry/exit as per the case steel, 2mm frame, 1.6 mm compartments & one coat of primer & painted in RED colour.
3)-The panel shall be compartmental, Form 3B type, with suitable size of bus bar and separate cable and busbar chambers. 4)-Providing suitable number of switchgears, busbars, auxilliary switches, audio alarm hooters, visual indications, relays, contactors, timers of suitable capacity for automatic operation of pumps i/c. connections and all connected accessories. Indicating lamps should be of LED type as per the Single line diagram.
5)-Proper gland size holes to be provided by the manufacturer with proper sticker and danger sign on all sides of panel.
6)-The cable chambers shall be free from any live open connections and minimum cleareance to be provided for termination.
7) Electrolytic Aluminum busbars grade E91E to IS 5082, 1 A/Sqmm,1100 V grade insulation, 25 kA for 1 sec, (IS-8623 for factory built assembly).
7)- Earthing terminal at both end.
9) Powder coating of approved color shade on both sides of provided iron work / MS / CRCA sheet steel work complete including anti-rust treatment - (7 Tank process) in an approved manner.
10) Includes coordination & setting of all swtchgear with upstream & downstream switchgear.
11) Panel stand as per site conditions is in contractor scope of work. All pumps automatic control on pressure, as per local Fire norms, IS standards should be in contrcator scope of work. (Including following items of 32 & 32.1 to 32.7)) Incoming 250A TPN 36kA MCCB TM Released with adjustable thermal & magnetic settings. Manual operated front rotary operated handle with R-Y-B-R-G-A lamps, with 3x metering CTs, digital MFM (with A,V, kWh Reading facility) Bus-bar 250 A TPN , AI. Busbar, Suitable for 35kA/1sec Outgoing 7.5 kW Y/Δ starter for Jockey pump with 20 A TPN MCB+25A Line Contactor+ 25A Delta contactor+12 A star contactor + 7A-10 A Relay, Thermal O/L, A/M selector, presure switch based On and Off control, R/G/A indication lamps 45 kW Y/Δ starters eletrical hydrant with 100 A MCCB TM Released with adjustable thermal & magnetic settings + Line contactor-185A, Delta contactor-185A, Star contactor-32 A, 45A-63 Relay Thermal O/L, A/M selector,Pressure switch operated On & Manual Off with R/G/A indication lamps.55 kW Y/Δ starters sprinkler pump with 100 A MCCB TM Released with adjustable thermal & magnetic settings + Line contactor-185A, Delta contactor-185A, Star contactor-32 A, 45A-63 Relay Thermal O/L, A/M selector,Pressure switch operated On & Manual Off with R/G/A indication lamps. 20A 10kA SPN MCB-Spare 40A 16kA TPN MCCB-Spare Engine control module comprising - step down transformer & solid state electronic automatic trickle / boost battery charger for engine starting battery 160 AH12 V or 24V battery as per engine requirement & microprocessor based electronic controller for HWT/OSR/LOP protection & cranking signal timer of adjustable 15 sec ON+15 Sec OFF with supervisory timer for 5 start attempt cranking fail with ACV/DCV/DCA meters, Normal/Abnormal indications,Audio Visual annunciation of faults, A/M selector, pressure switch operated On & Manual Off. Supply Cables Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.
1
-
-
... More
Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 core 35 sq.mm
50
-
-
... More
Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 1.5 Sq.mm
50
-
-
... More
Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 4 Sq.mm
25
-
-
... More
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 1.5 Sq.mm
50
-
-
... More
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 6 Sq.mm
50
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required
175
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm in the existing masonry open duct, etc. complete as required
50
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 x 1.5 sq.mm
10
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 x 4 sq.mm
10
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 x 35 sqmm
4
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 x 1.5 sqmm
10
-
-
... More
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 x 6 sqmm
10
-
-
... More
Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300 mm width 50 mm depth
12
-
-
... More
Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 150 mm width 50 mm depth
12
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300 mm width 50 mm depth
2
-
-
... More
Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 150 mm width 50 mm depth
2
-
-
... More
Supplying, fabricating & installing of M.S. Support, for MS piping supported on Brick wall/ RCC wall/ slab consisting with suitable size of mild steel angles, flat plate, channels, nut bolts etc..along with anchor, rod, etc. complete as per drawing.
50
-
-
... More
Supplying, Installing, Testing and Commissioning of Dial type water level indicator with potantial free contacts for underground RCC water tank up to 3.0 M depth comprising float in side a SS stilling well attached to SS rope & other end attached to drum with tensioned spring operating Red pointer thriugh a gear mechanism on powder coated Al dial with black graduations & numerals having 10mm accuracy complete with 2 nos 5A/230V AC adustable contacts & 4-20 mA transmitter with 2% accuracy.
1
-
-
... More
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C',For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications 150 mm dia
265
-
-
... More
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C',For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications 100 mm dia
305
-
-
... More
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C',For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications 80 mm dia
31
-
-
... More
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C',For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications 25 mm dia
30
-
-
... More
For underground, Fabrication of pipe in lengths to suit site condition & welding after bevelling pipes & using 3.15 mm electrode for root run & 2.5 mm for subsequent runs including taking & grinding including all fittings & providing rectifier welding machines with approved make electrodes, underground erection in excavated pipe trenches at 1M hydrotesting at 1.5 x working pressure before wrap coat & commissioning after 100% length holiday testing & radiography of 10% insitu joints subject to minimum 1.
Refer Technical Specifications 150 mm dia
80
-
-
... More
For underground, Fabrication of pipe in lengths to suit site condition & welding after bevelling pipes & using 3.15 mm electrode for root run & 2.5 mm for subsequent runs including taking & grinding including all fittings & providing rectifier welding machines with approved make electrodes, underground erection in excavated pipe trenches at 1M hydrotesting at 1.5 x working pressure before wrap coat & commissioning after 100% length holiday testing & radiography of 10% insitu joints subject to minimum 1.
Refer Technical Specifications 100 mm dia
70
-
-
... More
For underground, Fabrication of pipe in lengths to suit site condition & welding after bevelling pipes & using 3.15 mm electrode for root run & 2.5 mm for subsequent runs including taking & grinding including all fittings & providing rectifier welding machines with approved make electrodes, underground erection in excavated pipe trenches at 1M hydrotesting at 1.5 x working pressure before wrap coat & commissioning after 100% length holiday testing & radiography of 10% insitu joints subject to minimum 1.
Refer Technical Specifications 80 mm dia
11
-
-
... More
Supplying, installing, testing & commissioning of Bituminous Primer (200 gms/SqM). For under ground piping. Application of including provision of hand tool for surface cleaning & brush for application of primer.
12.48
-
-
... More
Supplying, installing, testing & commissioning of 2 mm thick tape to IS 10221 App B, tar based polymeric mix based on high tensile strength HMHDPE thermofusible material in 500 mm width. For Under ground piping. Application of including provision of LPG gas in cylinders & nozzle with piping, wrapping in 2 layers in oppostite direction with 15% overlap & thermal fusing in situ.
143.57
-
-
... More
Supplying, installing, testing & commissioning of Red Oxide primer (10 sqM per Ltr 25 micron DFT). For above ground piping, Application of including provision of hand tool for surface cleaning & brush for application of primer in 2 coats each of 25 micron DFT, satisfaction of Engineer-in-Charge.
47
-
-
... More
Supplying, installing, testing & commissioning of Synthetic enamel finish paint shade 536 in IS 5 (13.5 sqM per Ltr-25 micron). For Above ground piping. Brush for application of final paint compatible with primer in 2 coats each of 25 micron DFT, satisfaction of Engineer-in-Charge.
35
-
-
... More
Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN10 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 5155 of following sizes, including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID.
Refer Technical Specifications 150 mm dia
3
-
-
... More
Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN10 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 5155 of following sizes, including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID.
Refer Technical Specifications 100 mm dia
4
-
-
... More
Supplying, installing, testing & commissioning of forged brass 20 mm dia. Air Release Valve, 8.8 bar System pressure, full bore, forged brass body/ Chamber/ Cover- IS 6912 Gr. FLB, Float/ Lock/ Hinge/ Pin- Polypropylene, Spring SS304, Ring-Nitrile, Strainer-Plastic and with tag nos as per P & ID.
Refer Technical Specifications
4
-
-
... More
Supplying & erecting of bronze Ball Valves of 25 mm dia., full bore, two pieces, Quarter turn, Mild Steel lever operated with tag nos as per P & ID.
Refer Technical Specifications
24
-
-
... More
Supplying, installing, testing & commissioning of wall/ column/ ground mounted Outdoor/ Indoor Hose Cabinet of 16 gauge, CRCA sheet of 450mm x 450mm ht x 250mm suitable to house 1 no, 15 M hoses, branch pipe and nozzle with 4 mm thick glass visor, industrial key lock, chrome plated double leaf door handles, internal 2 coats of synthetic enamel white paint in 25 micron DFT each & 2 coats external synthetic enamel paint of 25 micron DFT in shade 536 of IS 5. The work includes Fabration & erection of ground mounted back frame steel structure or wall mounted with painting as also support grouting as per the site condition @ installing so that bottom of box is 900 mm above ground.
Refer Technical Specifications
35
-
-
... More
Supplying, installing, testing & commissioning of SS Single Headed Hydrant Valve, oblique type single outlet, with a flow of 900 LPM @ 7 bar flow having 63 mm instantaneous female coupling outlet & fitted with accessories of cap, chain etc. to IS 5290. Single outlet hydrants on 80 nb @ height of 1.2 M above ground including providing & welding of matching flange to BS 10 Table F,providing fasteners to IS 1363 grade 5.6/8.8 & rubber gaskets to IS 2172 grade W/3.
Refer Technical Specifications
35
-
-
... More
Supplying & installing wall mounting Swinging type Hose Reel Drum complete with hub, sides-powder coated finish in red, wall bracket made out of 16 guage CRCA sheet fitted with 19 mm dia, 30 m long rubber tubing confirming to IS 444 with 24 LPM flow & 6 M throw SS 304 jet nozzle to IS 8090 fitted with SS shut off valve to IS 778, fitted in wall/ structure as the case may be with fabration & erection of ground/ floor/ wall/ column mounted steel structure with painting.
Refer Technical Specifications
24
-
-
... More
Supplying, installing, testing & commissioning of RRL hose pipes 63 mm dia, 15 m in length, Type-A, reinforced rubber lined, to IS 636 complete with male female instantaneous copper wire bound coupling of 63 nb size in SS 304 conforming to IS 903. hoses in external/ internal hose cabinet.
70
-
-
... More
Supplying, installing, testing & commissioning of SS 304 branch pipe of 63 mm x 42.5 fitted & to IS 903 with SS 304 Jet nozzle with 42.4 mm x 20 mm size having 6 M throw & to IS 903. branch pipe in external/ internal hose cabinet.
35
-
-
... More
Supplying, installing, testing & commissioning of GM body and inlet in CI, 4 way Fire Brigade connection with NRV of 7 kG/cm2 working pressure and test pressure 10.5 kG/cm2, Header of 150 mm dia, M.S. ‘C’ class pipe having 4 Nos. of 150 mm manifold for outlets with built in spring loaded NRV & 150 nb butterfly Isolation valve with 150 mm dia flange, fitted with 4 nos. of 63 mm diameter instantaneous male inlet connection is provided at street level and connected to Hydrant water header.
1
-
-
... More
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.
Refer Technical Specifications 150 mm NB
470
-
-
... More
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.
Refer Technical Specifications 100 mm NB
854
-
-
... More
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.
Refer Technical Specifications 80 mm NB
496
-
-
... More
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.
Refer Technical Specifications 65 mm NB
388
-
-
... More
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.
Refer Technical Specifications 50 mm NB (threaded fittings)
1252
-
-
... More
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.
Refer Technical Specifications 40 mm NB (threaded fittings)
1595
-
-
... More
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.
Refer Technical Specifications 32 mm NB (threaded fittings)
384
-
-
... More
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.
Refer Technical Specifications 25 mm NB (threaded fittings)
4780
-
-
... More
Supplying, installing, testing & commissioning of Red Oxide primer (10 SqM per Ltr 25 micron DFT). For above ground piping, Application of including provision of hand tool for surface cleaning & brush for application of primer in 2 coats each of 25 micron DFT, satisfaction of Engineer-in-Charge.
301
-
-
... More
Supplying, installing, testing & commissioning of Synthetic enamel finish paint shade 536 in IS 5 (13.5 sqM per Ltr-25 micron). For Above ground piping. Brush for application of final coat compatible with primer in 2 coats each of 25 micron DFT.
223
-
-
... More
Supplying, installing, testing & commissioning of Pendant/ Upright / Recessed, UL/FM certified, SRSC sprinklers, chrome finish, K-factor 80 @ 0.5 bar (2.25 LPM @ 84 SqM), Temperature 58 Deg C, 4.5M x 4.5M, 1/2" NPT, including olet fittings & rosette plates.
Refer Technical Specifications
3151
-
-
... More
Supplying, installing, testing & commissioning of 150 mm dia. constant pressure Alarm Valve UL listed, flange x flange, suitable for vertical installation on Sprinkler riser, Housing/ Cover/ Clapper Ductile Iron, Seat SS, Gaskets/ Seat EPDM, body flanges drilled to ANSI 16.5 # 150 complete with hydraulic & alarm trim with matching flanged drilled to complete with Test & Alarm trim & providing & welding of matching flanges to BS10 Table D, providing fasteners to IS 1363 grade, 5.6/8.8 & rubber gaskets to IS 2172 grade W/3.
5
-
-
... More
Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN10 class of 150 mm dia, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 5155, including provision & welding of matching flange to BS10 Table F, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID.
10
-
-
... More
Supplying, installing, testing & commisssioning of insertion type vane Flow Switch UL listed pipe insertion type suitable for 30 bar pressure for velocity up to 6 M/Sec, trigger flow of 15 LPM with IP 55 switch box having 2 SPDT contacts rated at 1.5 A, 24 V DC. complete with all accessories.
5
-
-
... More
Supplying, installing, testing and commissioning of Test and Drain valve of 50 mm dia threaded brass body, ball type, suitable to k-factor 80, sight glass, between sprinkler header & 50 mm dia. drainage line including piping connections, cutting, threading etc, complete as required.
5
-
-
... More
Supplying, installing, testing & commissioning of Braided SS Flexible Sprinkler drops 1200 mm with 1" inlet nipple BSPT, 1/2" outlet reducer BSPT, 700 mm square support bar & bracket, complete & UL listed.
1231
-
-
... More
Supplying, installing, testing & commissioning of forged brass 20 mm dia. Air Release Valve, 8.8 bar System pressure, full bore, forged brass body/ Chamber/ Cover- IS 6912 Gr. FLB, Float/ Lock/ Hinge/ Pin- Polypropylene, Spring SS304, Ring-Nitrile, Strainer-Plastic.
5
-
-
... More
Supplying & erecting of bronze Ball Valves of 25 mm dia., full bore, two pieces, Quarter turn, Mild Steel lever operated.
5
-
-
... More
Supplying, installing, testing & commissioning of analogue addressable, UL listed, 4 Loop Main Fire Alarm Panel, BMS ready, additional networked, in-built communication system, 640 character LED backlit display with QUERTY keypad & status indicators, modular, suitable up to 10 isolated SLC (including 10% spare) each having up to 159D+159 M (for any lesser capacity additional SLC to be provided shall be included in price), built in Alarm/ Trouble/ Supervisor/ Security, Online/ Offline programming, Weekly scheduling, Degraded Mode Operation, Min 3000 event log with history sorting filter, minimum 500 Logic equations for cross zoning, Fire Fighter telephone option, RS485 MODBUS ports for Peer FAS Panels, Repeater panels & BMS, complete with monitored power supply to control module of hooters & probe, 230V operated, Floor/ wall mounted.
The power supply shall be Mains as also Redundant power supply with batteries. A seperate OEM sounder+ strobe DC power supply 24V & 6 A shall also be provided in cabinet
If any networking card is required, the same shall be included.
Refer Technical Specifications
1
-
-
... More
Supplying, installing, testing and commissioning of networkable Microprocessor based analogue addressable type Active Repeater panel within surface mounting box with glass door & with back lit adjustable alphanumeric 640 Chr LCD display, Function Rubberised Keys,Status & Diagnostic LED lamps with Access Enable key switch & Reset/ Mute/ Accept, sound alarm & self test etc. facilities, 24 V DC-90 mA quiescent- 120 mA operated, uses RS 485 peripheral Remote Data Port on FACP.
Refer Technical Specifications
1
-
-
... More
Supplying, installing, testing & commissioning of UL listed analogue addressable false ceiling/ flush on roof slab mounted Multi-Sensor Photoelectric Smoke Detector 1.63%/ ft to 13%/ ft sensitivity 8 level setting cum heat smoke detector 630 C fixed element, 24V DC 300μA quiescent & 6.5 mA operated, status LEDs, Rotary switch/ DIP switch addressing including with mounting base wiring box, all cabling, glands & terminations, complete.
Refer Technical Specifications
448
-
-
... More
Supplying, installing, testing & commissioning of UL listed analogue addressable, Heat detector having Fixed 57 DegC+ RoR 8.3 Deg per minute elements, loop powered, class A wired, low profile, temper resistant, low quiescent current, 360 Deg View LED, Rotary/DIP hardware based address setting switch, standby current 300 µA, 24V DC (15-32V), suitable for installation below false ceiling / flush on roof slab including with mounting base+wiring back box, all cabling, glands & terminations. Refer Technical Specifications
24
-
-
... More
Supplying, installing, testing & commissioning of Analogue Addressable UL listed Manual Pull Station/ Break Glass Unit, loop powered, 22V DC operating current, 600μA quiescent current with facility to programme the device from 01-159 with the help of dip/ rotary switches, complete with IP 24 housing with gland, Status LED for polling / fire condition etc.as required,Rotary switch/DIP switch hardware addressing installed in recess/ wall/ column including all cabling & terminations & glands
Refer Technical Specifications
25
-
-
... More
Supplying, installing, testing & commissioning of Analogue Conventional UL listed Strobe Sounders, 95 dB at 1 M output with 2 volume & 3 tone settings @ 75mA cum strobe with 15-75-115 candela settings at 75mA, 1Hz flash / second, rendered preferably suitable for selective operation through powered loop powered (externally powered may be accepted) with 24 V DC supply, installed in recess/ wall/ column including all cabling & terminations, complete as required with housing & cable glands on mounting backbox etc.
Refer Technical Specifications
25
-
-
... More
Supplying, installing, testing & commissioning of UL listed loop powered bidirectional Fault Isolator Module, 24 V DC, 400 μA quiescent & 17 mA in fire conditions, installation on addressable loop after every 15-20 detectors/ devices for isolating shorted, dewired and loose circuits between two successive fault isolators with automatic resetting arrangement complete with wiring back box with cable glands, base etc.
Refer Technical Specifications
25
-
-
... More
Supplying, installing, testing & commissioning of UL listed analogue addressable loop powered Input Monitor Module 20.5 V DC, 700 mA operated & 600 μA quiescent, rotary/ dip switch address setting, installed in recess/ wall/ column including all cabling & terminations & base wiring box.
5
-
-
... More
Supplying, installing, testing & commissioning of UL listed analogue addressable loop powered Control Module 20.5 V DC min, 700 mA operated & 600 μA quiescent, rotary/ dip switch hardware address setting, installed in recess/ wall/ column including all cabling & terminations & base wiring box.
Refer Technical Specifications
25
-
-
... More
Supplying, Installing, testing & commissioning of addressable, UL listed, Relay Module for AHU/ damper/ switchgear operation, loop powered, class A wired, low quiescent current,Rotary/ DIP decimal address setting switch, 24V DC (15-32V), suitable for surface / recess installation, housing & wiring box, In/Out cable glands for switching on/ off electrical equipments including wiring up to fan starter.
Refer Technical Specifications
53
-
-
... More
Supply, Installation, Testing & Commissioning of Power supply unit (SMPS), input-220AC, output-24V DC @ 2 AMP, to connect to fire alarm panel or NACs, battery backup with built in charging, low battery visual warning with audible tone, DC Output indication.
2
-
-
... More
Supplying & installing of 1 Pair, 1.5 sqmm Cable for looping 300/500V, stranded annealed tinned copper, 7/0.53mm, twisted, PVC insulation type C of IS 5831, Mylar backed aluminum screened with 25% overlap & 100% screen Inner extruded ST-2 sheath, single armoured, PVC St-2 extruded outer sheath in Red colour with FRLS, to BS 5308, for Class A wiring.
11400
-
-
... More
Supply of 2 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554 (Part I), IS:7098(Part I) with latest amendments of following size. ' 2 Core 1.5 sq.mm
400
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required
400
-
-
... More
Supply and making cable end terminations with compression gland and copper lugs for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. ' 2 Core 1.5 sq.mm
50
-
-
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
400
-
-
... More
Supplying & installing of ABC Type Fire Extinguisher Cap. 6 kg Filled with Mono Ammonium Phosphate Powder 50% confirms to IS 4308, Stored Pressure Type, UGTS Pressure Gauge, Discharge Time 24 Sec, Controllable discharge mechanism, Jet Range 5 Meters, Average Discharge is 92%, applicable on Class A,B & C and electrically started Fire, Fire Rating 4A:144B, Can Construction : Deep drawn & CO2 Mig welded, EPDM Rubber Hose with both end Aluminum clamped, Internal Coating - Epoxy Powder coating, External Coating - Pure Polyester Powder coating (UV Resistant), Brass forged valves with safety Pin is of SS material, Made up from 2mm thick sheet, ISI Approved IS 15683:2018.
106
-
-
... More
Supplying & installing of CO2 High Pressure Portable 4.5 kg Fire Extinguisher, filled with Co2 Gas as per IS 15222, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating 55B, Internal coating is not applicable & External coating is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS 7285 and PESO APPROVED, Extinguishers confirmed to IS 15683:2018 and ISI marked.
6
-
-
... More
Supplying & installing of Mechanical Foam type 45 ltr. Fire Extinguisher filled with AFFF Foam (6%), Applicable fire class A&B, Controllable Discharge mechanism, Discharge Time min. 30-160 Sec, Jet Range 9 Meters, Average Discharge is 95%, Fitted with EPDM Hose with SS spring of 300mm to avoid kink (4 meter long) & Air aspirated Nozzle, CO2 gas Cartridge of 300 grams. Confirms to IS 4947, External Pure polyester (UV Resistant) and Internal Epoxy polyester powder coated, Brass forged cap, and Welding Procedure approved by TPI with 6G certification. Confroms to IS 16018:2012,Fire rating 20A:233B
1
-
-
... More
Supplying & installing of Mechanical Foam stored pressure type 9 ltr. Fire Extinguisher filled with AFFF Foam confirms to IS 4989 (Part-II). Applicable fire class A & B, UTGS Pressure Gauge, Discharge Time 35 Sec, Controllable discharge mechanism, Jet Range 7 Meters, Average Discharge is 95%, Fire Rating- 4A:144B, Can Construction : Deep drawn & CO2 Mig welded, Controllable discharge mechanism with EPDM Hose & Air aspirated Nozzle, External Pure polyester powder coated (UV resistant) and Internal Plastic lining, Brass forged valves with safety Pin is of SS material, Made up from 2 mm thick sheet, As pe IS 15683:2018 and ISI Marked.
1
-
-
... More
Supplying & installing of Automatic type 10 kg Fire Extinguishers UL listed FE-36 (HFC-236 fa) gas which is Electrically nonconductive, non corrosive, colorless and non-residual clean agent Suitable for Class A, B, C, and electrical fires approved with US EPA (Environmental Protection Agency), listing under USA Signification New Alternative Policy ( SNAP ) & also approved by UL, compliant with ASTM -D6541-11. FE-36 Fire Extinguishers having Zero Ozone Depletion Potential (ODP), low toxicity, also its replacement for Halon 1211, Halon 1201, UGTS Pressure Gauge, Made up from 2 mm thick sheet, Body Construction Deep Drawn with MIG Welding technology, External Pure polyester and Internal Epoxy polyester powder coated, Brass forged sprinkler valves, Heat Sensitive Glass bulb of 68 ° C. Area covered will be 8 m2 and volume of coverage is 10 m3. (For Server Room)
3
-
-
... More
Supplying, installing, testing and commissioning of PA system Analogue master rack mount controller EN 60849 compliant message manager with 240 W built in amplifier with external amplifier input, 6 zones 100 V output, 12 business/ emergency inputs, front & back mounted controls & indicators, 19" rack mountable in 3U size.
Refer Technical Specification
1
-
-
... More
Supplying, installing, testing and commissioning of Supervised EN 60849 compliant rack mount Router for system expansion, connected to master controller by Cat 6+ cable by loop in loop out over 1000 m loop length with front & back mounted controls & indicators, 100V inputs from amplifiers, outputs for 6 speaker zones having capability of 700 W per zone, 50 VA consumption, 12 trigger inputs, programmable super vised EMG inputs, with controls & inputs, programmable super vised EMG inputs, with controls & indications at front & back, single or dual channel operation, 19" rack mounted in 2U size.
Refer Technical Specification
3
-
-
... More
Supplying, installing, testing and commissioning of 480 Watts Booster Amplifier rack mount, suitable to operate 230 Volts AC/ 24 Volts DC, 50 Hz-20 khz response, 4 balanced inputs / 3 stereo line inputs, multiple outputs 4ohm/ 8ohm/ 70V/ 100V, distortion less than 3%, 1 kohm, separate bass/ treble control, complete with, selectable 2- tone chime, 19" rack mounted in 3U size.
1
-
-
... More
Supplying, installing, testing and commissioning of 240 Watts Booster Amplifier rack mount, suitable to operate 230 Volts AC/ 24 Volts DC, 50 Hz-20 khz response, 4 balanced inputs / 3 stereo line inputs, multiple outputs 4ohm/ 8ohm/ 70V/ 100V, distortion less than 3%, 1 kohm, separate bass/ treble control, complete with, selectable 2- tone chime, 19" rack mounted in 2U size.
2
-
-
... More
Supplying, installing, testing and commissioning of 120 Watts Booster Amplifier rack mount, suitable to operate 230 Volts AC/ 24 Volts DC, 50 Hz-20 khz response, 4 balanced inputs / 3 stereo line inputs, multiple outputs 4ohm/ 8ohm/ 70V/ 100V, distortion less than 3%, 1 kohm, separate bass/ treble control, complete with, selectable 2- tone chime, 19" rack mounted in 2U size.
3
-
-
... More
Supplying, installing, testing and commissioning of 6 Watt Music & speech Speaker false ceiling / recess mounted, with or without back box, decorative aesthetic grill, 4 OHM, 100V line matching transformer, 98 dB/1M, wide opening angle, with spring loaded mounting clamps, with 1 Sqmm speaker cable in zone with 1000 W per zone up to 700 M zone wiring.
Refer Technical Specification.
209
-
-
... More
Supplying, installing, testing and commissioning of 30 Watt Cabinet Speaker wall/ column mounted, 8 OHM, 100V line matching transformer, 98 dB/1M, wide opening angle, with spring loaded mounting clamps, with 1 Sqmm speaker cable in zone with 1000 W per zone up to 450 M zone wiring. (Make- Ahuja)
Refer Technical Specification.
11
-
-
... More
Supplying, installing, testing and commissioning of 6 zone Call station with 6 zone selection keys/ all call key/ momentary PTT key having selectable gain/ speech filter/ limiter/ output level, LED lamps for zone selection/ fault/ emergency state, flexible stem unidirectional condenser microphone -GOOSENECK, extendable by Cat 6 for additional 8 key pads by loop.
1
-
-
... More
Supplying, installing, testing and commissioning of Call Station Key Pads with seven zone selection keys/ LED lamps for zone selection/ upto 6 keypads connected together.
1
-
-
... More
Supplying, drawing, connecting, testing and commissioning of shielded, twin twisted and stranded single core PVC insulated ( white PVC sheathing with colour skinning) FRLS copper conductor cable in existing surface/ recessed steel/ PVC conduit of approprriate size including connections etc. complete as required of following size. 2 x 1.5 sq.mm
1850
-
-
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
1850
-
-
... More
Supplying and fixing 6U Wall Mount loaded Rack of steel framed welded/ CKD, vented top cover with fan mounting provision, powder coated, cable entry/ exit cutouts and lockable toughened glass front door. as per specification in approved manner.
Refer Technical Specification
3
-
-
... More
Supplying and fixing 9U Wall Mount loaded Rack of steel framed welded/ CKD, vented top cover with fan mounting provision, powder coated, cable entry/ exit cutouts and lockable toughened glass front door. as per specification in approved manner.
Refer Technical Specification
2
-
-
... More
Supplying, installing, testing & commissioning of Talk Back Call Station & Talk Back Controller for 10 Zones & call button in Talk Back Speaker
Features :
* Monitor & Acknowledge Single/ Multiple Incoming calls.
* Feather type key pads to select the zones.
* Buzzer, Display of zone details & LED indication of incoming calls
* Backlight Liquid Crystal Display(LCD).
*Announcements: Individual Selectable Zones / Multi Selectable Zones / Group Zones/ All Zones.
* Without disconnecting the current called zone Talk Back Speaker, option for adding others zones Talk Back Speaker
* Fault Diagnostics features for Loop in loop out Addressable Talk Back System
1
-
-
... More
Supplying, installing, testing & commissioning of wall mounted Conventional Talk Back Speaker with Call Button (MS enclosure with Back box)
Features:
* Half Duplex communication for PA Speaker
*Voltage- 100V, *Speaker output- 6W
* Operates on 4 core cable with control Panel
* “PRESS TO CALL” button for call initiation to control room (Talk Back call Station)
*Color- Red
10
-
-
... More
Supplying, installing, testing and commissioning of 240 Watts Booster Amplifier rack mount, suitable to operate 230 Volts AC/ 24 Volts DC, 50 Hz-20 khz response, 4 balanced inputs / 3 stereo line inputs, multiple outputs 4ohm/ 8ohm/ 70V/ 100V, distortion less than 3%, 1 kohm, separate bass/ treble control, complete with, selectable 2- tone chime, 19" rack mounted in 2U size.
1
-
-
... More
Supplying, erecting, testing and commissioning stand mounted/ handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete.
1
-
-
... More
Supplying, erecting, testing and commissioning rust free microphone table stand of chrome plating/ powder coating or S.S. material, up to 500 mm height and suitable base for sturdy mechanism ensuring trouble free movement complete.
1
-
-
... More
Supplying, drawing, connecting, testing and commissioning of shielded, twin twisted and stranded single core PVC insulated ( white PVC sheathing with colour skinning) FRLS copper conductor cable in existing surface/ recessed steel/ PVC conduit of approprriate size including connections etc. complete as required of following size. 2 x 1.5 sq.mm
140
-
-
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
140
-
-
... More
Supplying, installing & testing of 2 Hr rated fire stop for horizontal opening in Electrical & Fire shafts as per UL 1479/ASTM E 814, comprising 3 bags of CP 636 (25kg bag) & 2 bottles of CP 620 (300mL bottle) per square meter of opening inclusive of necessary shuttering, scaffolding etc
26.4
-
-
... More
Supplying, installing & testing of 2 Hr rated fire stop for vertical opening in Walls for power as per UL1479/ASTME814, CFS COS Sheet for 1 sq.mt area (1 COS sheet size 900mm x 900mm) – 1.5 Sheet,
FX One Max- 8 bottles
1.35
-
-
... More
Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/700. And also Certified By Government of India Lab for a glow period 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Government of Goa Directorate of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
Note: Before procuring the sinages material, sample approval to be taken by GOA FIRE DEPARTMENT. DANGER SIGNAGES
SIZE – 250mm (HT) X 200mm(L)
3
-
-
... More
Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/700. And also Certified By Government of India Lab for a glow period 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Government of Goa Directorate of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
Note: Before procuring the sinages material, sample approval to be taken by GOA FIRE DEPARTMENT. NO SMOKING SIZE – 150mm (HT) X 400mm(L)
3
-
-
... More
Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/700. And also Certified By Government of India Lab for a glow period 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Government of Goa Directorate of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
Note: Before procuring the sinages material, sample approval to be taken by GOA FIRE DEPARTMENT.EXIT SIGNAGE
SIZE – 300mm(L) x 100mm(HT)
29
-
-
... More
Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/700. And also Certified By Government of India Lab for a glow period 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Government of Goa Directorate of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
Note: Before procuring the sinages material, sample approval to be taken by GOA FIRE DEPARTMENT. STAIRCASE IDENTIFICATION SIGNAGE (DOWN/ UP)
SIZE – 300mm(L) x 100mm(HT)
25
-
-
... More
Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/700. And also Certified By Government of India Lab for a glow period 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Government of Goa Directorate of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
Note: Before procuring the sinages material, sample approval to be taken by GOA FIRE DEPARTMENT. FIRE EXTINGUISHER SIGNAGE
SIZE – 200mm(L) x 250mm(HT)
112
-
-
... More
Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/700. And also Certified By Government of India Lab for a glow period 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Government of Goa Directorate of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
Note: Before procuring the sinages material, sample approval to be taken by GOA FIRE DEPARTMENT. DIRECTIONAL EXIT SIGNAGE Size – 300mm(L) x 100mm(HT)
44
-
-
... More
Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/700. And also Certified By Government of India Lab for a glow period 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Government of Goa Directorate of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
Note: Before procuring the sinages material, sample approval to be taken by GOA FIRE DEPARTMENT. HOSE REEL HOSE SIGNAGE
SIZE – 200mm(L) x 250mm(HT)
20
-
-
... More
Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/700. And also Certified By Government of India Lab for a glow period 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Government of Goa Directorate of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
Note: Before procuring the sinages material, sample approval to be taken by GOA FIRE DEPARTMENT. FIRE ALARM SIGNAGE
SIZE – 200mm(L) x 250mm(HT)
25
-
-
... More
Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/700. And also Certified By Government of India Lab for a glow period 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Government of Goa Directorate of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
Note: Before procuring the sinages material, sample approval to be taken by GOA FIRE DEPARTMENT. EMERGENCY ESCAPE PLAN SIGNAGE
SIZE – 420mm(L) x 297mm(HT) (A3)
18
-
-
... More
Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/700. And also Certified By Government of India Lab for a glow period 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Government of Goa Directorate of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
Note: Before procuring the sinages material, sample approval to be taken by GOA FIRE DEPARTMENT. ASSEMBLY POINT SIGNAGE
SIZE – 600mm(L) x 600mm(HT)
2
-
-
... More
Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/700. And also Certified By Government of India Lab for a glow period 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Government of Goa Directorate of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
Note: Before procuring the sinages material, sample approval to be taken by GOA FIRE DEPARTMENT. AUTHORISED PERSONNAL SIGNAGE
SIZE – 300mm(L) x 100mm(HT)
9
-
-
... More
Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/700. And also Certified By Government of India Lab for a glow period 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Government of Goa Directorate of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
Note: Before procuring the sinages material, sample approval to be taken by GOA FIRE DEPARTMENT. STAIRWAY MARKING SIGN
SIZE – 200MM(L) x 300mm(HT)
20
-
-
... More
Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/700. And also Certified By Government of India Lab for a glow period 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Government of Goa Directorate of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.
Note: Before procuring the sinages material, sample approval to be taken by GOA FIRE DEPARTMENT. DIRECTIONAL EXIT SIGNAGE (for ASSEMBLY POINT DIRECTION)
SIZE – 300MM(L) x 100MM(HT)
2
-
-
... More
Earthwork in excavation in foundation pipeline trenches, drain in saturated soil upto a depth of 0.6m lift upto 1.5 m including shoring strutting, pumping/ bailing out water ,stacking the excavated soil not more than 5m clear from the edge of the excavation and returning the stacked soil in 0.15 m layers when required into plinth sides of foundation, etc. consolidating each deposited layer by ramming and watering and disposing of all surplus excavated soil within a lead upto 20 m.
121.5
-
-
... More
Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.
97.2
-
-
... More
Constructing RCC pedestal for above ground piping (top above 0.45m from GL), including excavation, PCC, Concrete, shuttering, plastering above ground, steel, ISMC 150 on top of concrete pedestal, backfilling and complete as per drawing & engineer.
70
-
-
... More
Supplying, fabricating & installing of M.S. Support, for MS piping supported on Brick/ Concrete compound wall consisting with suitable size of mild steel angles, channels, flat plate, nut bolts etc..along with anchor, rod, etc. complete as per drawing & engineers instructions.
The design shall consider span, weight of water filled pipe, cantilever arm etc. The structure shall be painted with 1 coat primer & 2 coats MIO & Final coat as explained elsewhere under painting.
60
-
-
... More
Providing at store or site work non-pressure RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete. NP2 Class 250 mm dia
40
-
-
... More
HVAC WORKS
-
-
-
... More
WATER COOLED 'SCREW' CHILLER Supply and commissioning of 'Screw' type Water-cooled liquid chillers for the following operating conditions.The chillers shall be complete with Screw compressors, Shell & Tube water cooled condensers, Flooded evaporator, Drive Motor, Control panel, First Charge of R-134a/R-410C Refrigerant, Oil, Expansion Device etc., The chiller shall have stepless capacity control, as per specifications complete with Starter Panel. The equipmnet shall necessarily be with Multi Compressors. The Chiller shall be capable of opearting in open Ambient temperature of 32.2 Deg.C , Goa. The equipment shall be placed in a covered shed. The Chiller shall use R-134A / R-410C Refrigerant. The Chiller should be installed on Spring Mounted Antivibration mounts. Antivibration Mounts, flexible outlet connections to the Shell & Tube Heatexchangers, Victaulic Couplings etc., to be provided by Chiller Manufacturer as per their standard & recommended practices. Water cooled condenser / Evaporator will be of Shell and Tube type. Shell will be fabricated from rolled carbon steel plate with fusion welded seams have carbon steel tube sheets, drilled and reamed to accommodate the tubes; and intermediate tube supports spaced no more than four feet apart. The refrigerant side will be designed & tested in accordance with applicable pressure vessel code. Tubes shall be high-efficiency, internally and externally enhanced type having copper tubes. Each tube will be roller expanded into the tube sheets providing a leak proof seal, and be individually replaceable. The Evaporator shall be provided with Insulation of using 19 mm Thick Nitrile Rubber insulation Finished with Glass Cloth. Micro-processor based controls with alpha-numeric display in English for all operating parameters such as supply voltage, frequency, load current, chilled water inlet, chilled water outlet, condenser inlet and outlet temperature parameters, operating pressures, input power, Condenser & Evaporator Approach etc..The processor must be fitted with card for external communication for parameters in open protocol such as Bacnet / Lonwroks / Modbus etc., Power and control hardware including unit disconnecting / isolating Switch (MCCB), one point start-stop, protective MCCBs for electric motors, timer control, safety features for under-voltage and over voltage, single phase preventor, trip circuit with sensing elements for HP/LP/Anti-freeze etc.,The Chiller shall be properly Powder Coated to protect all the exposed components from weathering. The Price should also includes integral refrigerant piping with liquid isolation valves, and wiring, flow swtiches / sensors, accessories as required and called for, automatic and safety controls mounted in central control panel and all mounted on a steel frame.The Chiller shall be properly Painted to protect all the exposed components from weathering. The Price should also includes integral refrigerant piping with liquid isolation valves, and wiring, sensors, accessories as required and called for, automatic and safety controls mounted in central control panel and all mounted on a steel frame. The bidder shall submit a computerized selection sheet of the chiller offered as obtained from the manufacturer along with their offer from the latest AHRI listed software version. Non-submittal of the computerized selection sheet shall be liable for bid rejection. The cooler and condenser shall have applicable pressure code vessel stamping on the nameplate as a standard, without which the machines will be rejected. Chillers Capacity -260 TR (Actual Capacity) .The chiller output shall be at the following conditions, The chiller should have Multiple Compressors. The compressor unloading shall be from 25% to 100%. Chilled Water Out - 7 Deg.C.Chilled Water In - 12 Deg.C.Condenser Water Outlet - 35.7 Deg.C.Condenser Water Inlet - 30.9 Deg.C. Operating Voltage 440 V + 15%, 50 Hz, 4 Wire, 3 Phase with Earthing and Starter panel. Minimum C.O.P shall be 5.9 or better. Chiller Perofrmance shall be as per ARI 550/590 Fouling Factor as per ARI Evaporator - 0.0001 Btu/Hr.Sq.ft.Deg.F
3
-
-
... More
Condenser - 0.0025 Btu/Hr.Sq.ft.Deg.F. Installation and testing of Chiller including lifting, shifting, placing on foundation in the Plant Room on terrace. The Vendor should inspect the site before quoting and familarise himself with the site situation. The chiller should be covered with Tarpaulin till the installation and handing over of the system, to protect the chiller from weathering and dust. 260 TR Water Cooled Chiller
3
-
-
... More
CHILLED WATER PUMP SKID Supply, Installation, testing & commissioning of Chilled water Pumps Skids as per specifications mentioned below. Please refer Pump Data sheets for more details.All Motor shall be energy efficient type 1 (IE3) with efficiency not less than IS-12615 Motor Ratings & Efficiencies shall be in line with ECBC Code 2017. Factory made chilled water pump skid for Primary pumping for 3 Nos. (1W+1S) complete with SS/Bronze Impeller & Mechanical Seal, with Split casing/End Suction Pumps , each capable of delivering 40.82 LPS at 15 meter head, 3 nos.Y-Strainers, 6 Nos. Butterfly Valves, 3 Nos. Non-Return Valve, 3 Nos. Combo Digital gauge , 3 Nos. 25mm ball valve for Drain. The skid shall have 150 mm Dia. Individual pump piping . The entire skid shall be mounted on a 'C' channel base frame with vibration isolators.Antivibration Bellows should be provided at inlet & outlet of each Pump. The entire skid shall be coated with Zinc-cromate primer coating and then painted with enamel paint. The entire skid shall be insulated with 32 mm XLPE / Nitrile Rubber Chemically /Physically Crosslinked Insulation with Alufoil capable of UV Protection properties and finally finished with 26 gauge aluminium cladding.
1
-
-
... More
Factory made chilled water pump skid for Condenser water pumping for 3 Nos. (2W+1S) complete with SS/Bronze Impeller & Mechanical Seal, with Split casing/End Suction Pumps , each capable of delivering 49.14 LPS at 25 meter head, 3 nos.Y-Strainers, 6 Nos. Butterfly Valves, 3 Nos. Non-Return Valve, 3 Nos. Combo Digital gauge , 3 Nos. 25mm ball valve for Drain. The skid shall have 200 mm Dia. Individual pump piping . The entire skid shall be mounted on a 'C' channel base frame with vibration isolators.Antivibration Bellows should be provided at inlet & outlet of each Pump.
1
-
-
... More
Factory made chilled water pump skid for Secondary pumping. 3 Nos. Pump (2W+1S). The Skid shall be complete with 3 Nos. Pumps with C.I. Body, SS/Bronze Impeller & Mechanical Seal, each capable of delivering 40.82 LPS at 35 meter head, 3 nos.Y-Strainers, 6 Nos. Butterfly Valves, 3 Nos. Non-Return Valve, 3 Nos. Combo Digital gauge , 3 Nos. 25mm ball valve for Drain. The skid shall have 150 mm Dia. Individual pump piping. The entire skid shall be mounted on a 'C' channel base frame with vibration isolators.Antivibration Bellows should be provided at inlet & outlet of each Pump. The entire skid shall be coated with Zinc-cromate primer coating and then painted with enamel paint. The entire skid shall be coated with Zinc-cromate primer coating and then painted with enamel paint. The entire skid shall be insulated with 32 mm XLPE / Nitrile Rubber Chemically /Physically Crosslinked Insulation with Alufoil capable of UV Protection properties and finally finished with 26 gauge aluminium cladding.
1
-
-
... More
Supply, Installation , Testing and commissioning of Induced Draft Cooling Tower with multi Cell complete with FRP Basin, Base Supports in GI, Munters Fills, Nozzels, FRP Moulded Fan, ECBC Code 2007 efficient Fan Motor (IS-12615) at 1400 RPM, Inlet & Outlet & Drain Connections. The Cooling Tower Shall be CTI Approved with advanced drift eliminators. The Cooling Tower shall be of 325 TR Tower capacity / 260 TR AC Capacity working at Goa. The inlet water would be at 35.70 Deg.C and the basin water should be at 30.9 Deg.C. The Cooling tower shall have 1 Fan in each cell, with least power consumption. The total flow rate through cooling tower shall be 714 CMH.
3
-
-
... More
Closed Expansion Tank with Expansion Vessel and Pressurising Pumps (1 working + 1 standby). The tank capacity to be calculated as per the system volume. Expansion tank to be of MS Construction with UV STabilised XLPE Insulation 32 mm thick class 'O' for fire & covered with UV Stabilised Protection, suitable for 1248 GPM / 78.62 LPS for 2 Nos. 260 TR (2W + 1S) Watercooled Screw Chillers. The insulation shall be factory laminated with UV Stabilised Protection, with superior workmanship. The insulation shall be finally finished with 26 Gauge aluminium cladding, for Physical & UV Protection.
100
-
-
... More
Air Seperator for Chilled Water in MS construction with SS internal perforated sheet, with XLPE Insulation with Alu Foil / UV Protection insulation of 32 mm thick class 'O' for fire & covered with 26 Gauge Aluminium Cladding with superior workmanship and necessary valves etc., suitable for the following flow rates. 78.62 LPS. The pipe insulation shall be factory laminated with Alufoil, with superior workmanship.
1
-
-
... More
Supply, Installation, Testing & Commissioning of online Tube Cleaning System as recommended by the manufacturer, complete with all necessary Piping, Valves, (Balls / Brushes), Diverter Valves, etc., all fitting deemed necessary for trouble free operation of the tube cleaning system. Kindly note that this shall ensure clean heat exchangers and hence allowing maximum efficiency and minumum approach. The system shall be 1:3
1
-
-
... More
Supply, installation, testing & commissioning of valves & Gauges with Nitrile Rubber Insulation with Alufoil capable of UV Protection of 32 mm thick. The pipe insulation shall be factory laminated with Alufoil UV Stabilised. All exposed piping shall be finally finished with 26 Gauge Aluminium Cladding.
(Butterfly valves from Dia.250mm and above should be Handwheel with gear box type) Manual balancing valve for evaporator outlet 150mm Dia. Evaporator Side
3
-
-
... More
Motorised Butterfly Valves 150 mm dia. Across 260 TR Chiller Evaporator Side
6
-
-
... More
Flow Switch - Suitable for 150 mm dia pipe for 260 TR Chiller Evaporator Side
3
-
-
... More
Differential Pressure Switch - Suitable for 150 mm dia pipe for 260TR Chiller Evaporator Side
3
-
-
... More
Chiller Inlet & Outlet Rubber Expansion Bellows - 150 mm Dia for 260 TR Chiller Evaporator Side
6
-
-
... More
Combo Digital Gauges for Temp. & Press. with 2 Nos. Temperature Transmitters & 2 Nos. Pressure Transmitters for each unit for 260 TR Chiller Evaporator Side
3
-
-
... More
Manual Butterfly Valves Dia.150mm for chiller evaporator side
6
-
-
... More
Manual Butterfly Valves for isolation -Dia.50mm
2
-
-
... More
Manual Butterfly Valves for isolation -Dia.80mm
2
-
-
... More
Supply, installation, testing & commissioning of valves & Gauges for Condenser side equipments.
(Butterfly valves from Dia.250mm and above should be Handwheel with gear box type) Motorised Butterfly Valves 200 mm dia. Across 260 TR Chiller Condenser side
3
-
-
... More
Manual Butterfly Valves 200 mm dia. For chiller condenser side
6
-
-
... More
Flow Switch - Suitable for 200 mm dia pipe for 260 TR Chiller Condenser side
3
-
-
... More
Differential Pressure Switch - Suitable for 200 mm dia pipe for 260 TR Chiller Condenser side
3
-
-
... More
Chiller Inlet & Outlet Rubber Expansion Bellows - 200 mm Dia for 260 TR Chiller Condenser side
6
-
-
... More
Combo Digital Gauges for Temp. & Press. with 2 Nos. Temperature Transmitters & 2 Nos. Pressure Transmitters for each unit for 260 TR Chiller Condenser side
3
-
-
... More
Manual Butterfly Valves 200 mm dia. For Cooling Tower
6
-
-
... More
Motorised Butterfly Valves 200 mm dia. For Cooling Tower
6
-
-
... More
Manual Butterfly Valves 100 mm dia. For Equalizer Line
4
-
-
... More
Manual Butterfly Valves 50 mm dia. For Cooling tower Drain each cell
4
-
-
... More
Manual Butterfly Valves 40 mm dia. For Cooling tower Makeup and Quick Fill
3
-
-
... More
Ball valve for drain and Air Removal-15mm Dia.
6
-
-
... More
Ball valve for Water fill up at each pipe end-50mm Dia.
4
-
-
... More
Supply, installation, testing and commisssioning of Ceiling suspended single Skin AHUs. , AHU specifications should be as per provided AHU Schedule.AHU with local control panel complete with required power cables , cable try and accessories. Upper Ground Floor Maharashtra and Daman Diu-14 TR , 5600 CFM
1
-
-
... More
North Goa-8.0 TR , 3200 CFM
1
-
-
... More
Haryana-7.0 TR , 2800 CFM
1
-
-
... More
Punjab and Chandigarh-14 TR , 5600 CFM
1
-
-
... More
Workshop 01-7.0 , 2800 CFM
1
-
-
... More
Himachal pradesh- 8.0 TR , 3200 CFM
1
-
-
... More
Art gallery 01-17 TR , 6800 CFM
1
-
-
... More
Uttarakhand- 8.0 TR , 3200 CFM
1
-
-
... More
Uttar Pradesh-8.0 TR , 3200 CFM
1
-
-
... More
Odisha & chhattisgarh- 16 TR , 6400 CFM
1
-
-
... More
Telengana- 8.0 TR , 3200 CFM
1
-
-
... More
Tamil nadu and andhra pradesh- 16 TR , 6400 CFM
1
-
-
... More
Andaman nicobar-7.0 TR , 2800 CFM
1
-
-
... More
South Goa-7.0 TR , 2800 CFM
1
-
-
... More
Supply, installation, testing and commisssioning of Ceiling suspended single Skin AHUs. , AHU specifications should be as per provided AHU Schedule.AHU with local control panel complete with required power cables , cable try and accessories. First Floor Art gallery 02-14 TR , 5600 CFM
1
-
-
... More
Madhya pradesh-7.0 TR , 2800 CFM
1
-
-
... More
Gujarat-7.0 TR , 2800 CFM
1
-
-
... More
Art gallery 03-11 TR , 4400 CFM
1
-
-
... More
Workshop 02-7.0 TR, 2800 CFM
1
-
-
... More
Delhi-7.0 TR , 2800 CFM
1
-
-
... More
Jammu and kashmir and ladakh-17 TR , 6800 CFM
1
-
-
... More
Arunachal pradesh-7.0 TR , 2800 CFM
1
-
-
... More
Nagaland-7.0 TR , 2800 CFM
1
-
-
... More
Workstation 03-7.0 TR , 2800 CFM
1
-
-
... More
Jharkhand and bihar-14 TR , 5600 CFM
1
-
-
... More
West bengal-7.0 TR , 2800 CFM
1
-
-
... More
Puducherry & meghalay-14 TR , 5600 CFM
1
-
-
... More
Tripura-7.0 TR , 2800 CFM
1
-
-
... More
Lakshyadweep-7.0 TR , 2800 CFM
1
-
-
... More
Supply, installation, testing and commisssioning of Ceiling suspended single Skin AHUs. , AHU specifications should be as per provided AHU Schedule.AHU with local control panel complete with required power cables , cable try and accessories Second Floor Karnataka-7.0 TR , 2800 CFM
1
-
-
... More
Art gallery 04-14 TR , 5600 CFM
1
-
-
... More
Kerala-7.0 TR , 2800 CFM
1
-
-
... More
Workshop 04-7.0 TR ,2800 CFM
1
-
-
... More
Art gallery 05-11 TR , 4400 CFM
1
-
-
... More
Shop 01-7.0 TR , 2800 CFM
1
-
-
... More
Shop 02- 7.0 TR , 2800 CFM
1
-
-
... More
Assam and sikkkim-16 TR , 6400 CFM
1
-
-
... More
Manipur- 7.0 TR , 2800 CFM
1
-
-
... More
Mizoram- 7.0 TR , 2800 CFM
1
-
-
... More
Workshop 05-7.0 TR , 2800 CFM
1
-
-
... More
Supply, installation, testing and commisssioning of Ceiling suspended single Skin AHUs. , AHU specifications should be as per provided AHU Schedule.AHU with local control panel complete with required power cables , cable try and accessories Third Floor Business lounge-14 TR , 5600 CFM
1
-
-
... More
Center of excellence-7.0 TR , 2800 CFM
1
-
-
... More
Seminar hall 02-7.0 TR , 2800 CFM
1
-
-
... More
Seminar hall 01-14 TR , 5600 CFM
1
-
-
... More
FLOOR MOUNTED AHU Supply, installation, testing and commisssioning of floor mounted single Skin AHUs. , AHU specifications should be as per provided AHU Schedule.AHU with local control panel complete with required power cables , cable try and accessories. Upper Ground Floor-100 TR , 40,000 CFM
2
-
-
... More
First Floor- 45 TR , 18000 CFM
1
-
-
... More
Second floor-45 TR, 18000 CFM
1
-
-
... More
Third floor-25 TR , 10000 CFM
1
-
-
... More
Supply, Installation, Testing & Commissioning of Factory Made Chilled water AHU Valve Stations in MS Class 'C' piping, complete with 5 Nos. Butterfly Valves, 2-Way PIBCV Valve with actuator and Sensor , 1 No. Y - Strainer, 1 Nos. Combo Digital Display Unit with 2 Nos. Temperature & 2 Nos. Pressure Transmitters, Dia. 25 mm By-pass line between Supply & Return with Ball Valve & Non Return Valve. The entire skid shall be coated with Zinc - Cromate primer and then painted with enamel paint. The Valve Station shall be insulated using 32 mm thick Nitrile Rubber Insulation, with UV stabilised covering. The Valve Station shall be finally finished with 26 Gauge Aluminium Cladding. The station shall be used for following AHUs: Upper Ground Floor Maharashtra and Daman Diu-Dia.50mm
1
-
-
... More
North Goa-Dia.32mm
1
-
-
... More
Haryana-Dia.32mm
1
-
-
... More
Punjab and Chandigarh-Dia.50mm
1
-
-
... More
Workshop 01-Dia.32mm
1
-
-
... More
Himachal pradesh-Dia.32mm
1
-
-
... More
Art gallery 01-Dia.40mm
1
-
-
... More
Uttarakhand-Dia.32mm
1
-
-
... More
Uttar Pradesh -Dia.32mm
1
-
-
... More
Odisha & chhattisgarh-Dia.50mm
1
-
-
... More
Telengana-Dia.32mm
1
-
-
... More
Tamil nadu and andhra pradesh-Dia.50mm
1
-
-
... More
Andaman nicobar-Dia.32mm
1
-
-
... More
South Goa-Dia.32mm
1
-
-
... More
Supply, Installation, Testing & Commissioning of Factory Made Chilled water AHU Valve Stations in MS Class 'C' piping, complete with 5 Nos. Butterfly Valves, 2-Way PIBCV Valve with actuator and Sensor , 1 No. Y - Strainer, 1 Nos. Combo Digital Display Unit with 2 Nos. Temperature & 2 Nos. Pressure Transmitters, Dia. 25 mm By-pass line between Supply & Return with Ball Valve & Non Return Valve. The entire skid shall be coated with Zinc - Cromate primer and then painted with enamel paint. The Valve Station shall be insulated using 32 mm thick Nitrile Rubber Insulation, with UV stabilised covering. The Valve Station shall be finally finished with 26 Gauge Aluminium Cladding. The station shall be used for following AHUs: First Floor Art gallery 02-Dia.50mm
1
-
-
... More
Madhya pradesh-Dia.32mm
1
-
-
... More
Gujarat-Dia.32mm
1
-
-
... More
Art gallery 03-Dia.40mm
1
-
-
... More
Workshop 02-Dia.32mm
1
-
-
... More
Delhi-Dia.32mm
1
-
-
... More
Jammu and kashmir and ladakh-Dia.50mm
1
-
-
... More
Arunachal pradesh-Dia.32mm
1
-
-
... More
Nagaland-Dia.32mm
1
-
-
... More
Workstation 03-Dia.32mm
1
-
-
... More
Jharkhand and bihar-Dia.50mm
1
-
-
... More
West bengal-Dia.32mm
1
-
-
... More
Puducherry & meghalay-Dia.50mm
1
-
-
... More
Tripura-Dia.32mm
1
-
-
... More
Lakshyadweep-Dia.32mm
1
-
-
... More
Supply, Installation, Testing & Commissioning of Factory Made Chilled water AHU Valve Stations in MS Class 'C' piping, complete with 5 Nos. Butterfly Valves, 2-Way PIBCV Valve with actuator and Sensor , 1 No. Y - Strainer, 1 Nos. Combo Digital Display Unit with 2 Nos. Temperature & 2 Nos. Pressure Transmitters, Dia. 25 mm By-pass line between Supply & Return with Ball Valve & Non Return Valve. The entire skid shall be coated with Zinc - Cromate primer and then painted with enamel paint. The Valve Station shall be insulated using 32 mm thick Nitrile Rubber Insulation, with UV stabilised covering. The Valve Station shall be finally finished with 26 Gauge Aluminium Cladding. The station shall be used for following AHUs: Second Floor Karnataka-Dia.32mm
1
-
-
... More
Art gallery 04-Dia.50mm
1
-
-
... More
Kerala-Dia.32mm
1
-
-
... More
Workshop 04-Dia.32mm
1
-
-
... More
Art gallery 05-Dia.50mm
1
-
-
... More
Shop 01-Dia.32mm
1
-
-
... More
Shop 02-Dia.32mm
1
-
-
... More
Assam and sikkkim-Dia.50mm
1
-
-
... More
Manipur-Dia.32mm
1
-
-
... More
Mizoram-Dia.32mm
1
-
-
... More
Workshop 05-Dia.32mm
1
-
-
... More
Supply, Installation, Testing & Commissioning of Factory Made Chilled water AHU Valve Stations in MS Class 'C' piping, complete with 5 Nos. Butterfly Valves, 2-Way PIBCV Valve with actuator and Sensor , 1 No. Y - Strainer, 1 Nos. Combo Digital Display Unit with 2 Nos. Temperature & 2 Nos. Pressure Transmitters, Dia. 25 mm By-pass line between Supply & Return with Ball Valve & Non Return Valve. The entire skid shall be coated with Zinc - Cromate primer and then painted with enamel paint. The Valve Station shall be insulated using 32 mm thick Nitrile Rubber Insulation, with UV stabilised covering. The Valve Station shall be finally finished with 26 Gauge Aluminium Cladding. The station shall be used for following AHUs: Third Floor Business lounge-Dia.50mm
1
-
-
... More
Center of excellence-Dia.40mm
1
-
-
... More
Seminar hall 02-Dia.40mm
1
-
-
... More
Seminar hall 01-Dia.32mm
1
-
-
... More
Supply, Installation, Testing & Commissioning of Factory Made Chilled water AHU Valve Stations in MS Class 'C' piping, complete with 5 Nos. Butterfly Valves, 2-Way PIBCV Valve with actuator and Sensor , 1 No. Y - Strainer, 1 Nos. Combo Digital Display Unit with 2 Nos. Temperature & 2 Nos. Pressure Transmitters, Dia. 25 mm By-pass line between Supply & Return with Ball Valve & Non Return Valve. The entire skid shall be coated with Zinc - Cromate primer and then painted with enamel paint. The Valve Station shall be insulated using 32 mm thick Nitrile Rubber Insulation, with UV stabilised covering. The Valve Station shall be finally finished with 26 Gauge Aluminium Cladding. The station shall be used for following AHUs: Floor Mounted AHU Upper Ground Floor--Dia.100mm
2
-
-
... More
First Floor-Dia.80mm
1
-
-
... More
Second floor-Dia.80mm
1
-
-
... More
Third floor--Dia.65mm
1
-
-
... More
CHILLED WATER CASSETTE UNIT Supply, Installation, Testing and Commssioning of Chilled Water Cassette unit complete with Cooling, Coil, Fan, Cordless Remote Control and Drain Pump to remove condensate water etc., Creche-1.0 TR
2
-
-
... More
CHILLED WATER CASSETTE UNIT Supply, Installation, Testing and Commssioning of Chilled Water Cassette unit complete with Cooling, Coil, Fan, Cordless Remote Control and Drain Pump to remove condensate water etc., Admin-2.0 TR
4
-
-
... More
Supply, Installation, Testing & Commissioning of Factory Made Chilled water Cassette Unit Valve Stations in 16 Gauge Copper Piping complete with 2 Nos. Ball Valves of 25mm size, one with strainer, On/Off Type 2-way (PIBCV) Pressure independant control valve with Actuator & Sensor, By-pass line with Ball Valve & Non Return Valve of 10mm size etc., The station shall be used for above capacity Cassette Units. The entire skid shall be Insulated with 25mm thick Nitrile Rubber. The pipe insulation shall be factory laminated with Armachek 'GC' / Equivalent Glass Cloth, with superior workmanship. Creche-1.0 TR, Dia-25mm
2
-
-
... More
Supply, Installation, Testing & Commissioning of Factory Made Chilled water Cassette Unit Valve Stations in 16 Gauge Copper Piping complete with 2 Nos. Ball Valves of 25mm size, one with strainer, On/Off Type 2-way (PIBCV) Pressure independant control valve with Actuator & Sensor, By-pass line with Ball Valve & Non Return Valve of 10mm size etc., The station shall be used for above capacity Cassette Units. The entire skid shall be Insulated with 25mm thick Nitrile Rubber. The pipe insulation shall be factory laminated with Armachek 'GC' / Equivalent Glass Cloth, with superior workmanship. Admin-2.0 TR, Dia-25mm
4
-
-
... More
Supply, Installation, Testing & Commissioning of Brass Fitting for end connection to Cassette Unit & Chilled water Lines, The cost shall also include all Male Female Joints, sealing Tape, Nitrile rubber insulation of the same with 19mm thick Tubes etc.,
24
-
-
... More
Supply, installation, testing and commissioning of INVERTER TYPE HI WALL Split A.C. with R410/R-32 refrigerant, complete with following component. Out door Unit should have Inverter Compresser, high efficiency finned tinned condensors. Fins should be with anti corrosive coating with all electrical accessories ready for connection to incoming cable. The entire unit shall be in a weather proof, powder coated body & installed on suitable stand as per location. Unit should be charged with necessary refrigerent gas & oil. The indoor units will be complete in all respect including filter, LCD wireless remote control, aerodynamically balanced blower. The unit should have air filter. Exposed units & grills will be aesthetically finished with powder coating of specified colour. 1.5 TR
6
-
-
... More
Oudoor Units Stands for above Inverter DX Units , fabricated out of Mild Steel (MS) 'C' Channel Section of minimum 75mm x 50mm x 5mm thick size complete with minimum 300mm long legs made of the same 'C' channel with 8mm thick MS Plate at the bottom of the legs. The MS Plate should be minimum 150mm x 150mm. 2 Layered 10mm thick Ribber Rubber Pads with 24 Gauge GI Shim inbetween shall be installed below the Condenser Stand Legs.
6
-
-
... More
VENTILATION UNITS Supply,Installation, testing & commissioning of In-Line / Cabinet fan complete with Fire retardant Canvass connection and required accessories .The fan Capacity should be as under; (Fan Static Pressure-100 Pascal) 11,200 cfm
1
-
-
... More
5600 cfm
1
-
-
... More
2500 cfm
2
-
-
... More
5200 cfm
1
-
-
... More
Supply ,Installation, Testing and Commissioning of single speed smoke extraction axial fan with aerofoil impeller and adjustable pitch angle, die cast aluminium hub and blades, Long casing , hot dip galvanized steel to DIN EN ISO 1461. Fan shall have terminal box in IP65 mounted at the outside of the casing for easy wiring. Motor in IP54, motor insulation class H, in accordance with EN 60034-5/IEC 85. Fan should be suitable for operating temperature up to 55 Deg. C continuouse or once for 300 Deg.C for 120 min. Fan shall be completed with saftey guard at both the end.
(Fan Static Pressure-250 Pascal) 20,200 cfm
4
-
-
... More
Supply ,Installation, Testing and Commissioning of Starter Panel for the Smoke extraction fans with Star Delta / DOL starter with MPCB Push Buttons ON/OFF Trip Indication lights etc., with necessary interlocking with Fire Panel to enable automatic start in case of fire.
1
-
-
... More
Supply,Installation, testing & commissioning ofwall mounted propeller type exhaust fan complete with gravity louver and required accessories .The fan Capacity should be as under; Propeller type exhaust fan-500 cfm
2
-
-
... More
Propeller type exhaust fan-1000 cfm
2
-
-
... More
Propeller type exhaust fan-1500 cfm
2
-
-
... More
AIR DISTRIBUTION PRODUCTS Supply,Installation, testing & commissioning of Air Distribution Products of the following types complete with all accessories mentioned With all fittings for installation in GI. Supply,Installation, testing & commissioning of supply air square diffuser with damper having a outer size of 600X600 and neck size of 450X450
260
-
-
... More
Supply,Installation, testing & commissioning of Return air square diffuser without damper having a outer size of 600X600 and neck size of 450X450
260
-
-
... More
Supply,Installation, testing & commissioning of Exhaust air square diffuser without damper having a outer size of 300X300 and neck size of 225X225
160
-
-
... More
Supply,Installation, testing & commissioning ofAluminium Powder Coated Weather Louver for fresh Air
28
-
-
... More
Supply, Installation, Testing and Commissioning of duct type fire damper with frame in GI Construction complete fusible link , fire rated for 90 min. and dead weight.
12
-
-
... More
Supply, Installation, Testing and Commissioning of insulated flexible duct complete with fittings and other accessories. Dia.200mm
350
-
-
... More
Supply, Installation, Testing and Commissioning of uninsulated flexible duct complete with fittings and other accessories. Dia.100mm
70
-
-
... More
Supply, Installation, Testing and Commissioning of opposed blade volume control in GI construction.
10
-
-
... More
Supply, Installation, Testing and Commissioning of sequencial controllers for DX units
3
-
-
... More
Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. 200 MM dia.
258.5
-
-
... More
Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. 150 MM dia.
189.2
-
-
... More
Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. 125 MM dia.
110
-
-
... More
Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. 100 MM dia.
33
-
-
... More
Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. 80 MM dia.
1144
-
-
... More
Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. 65 MM dia.
467.5
-
-
... More
Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. 50 MM dia.
481.8
-
-
... More
Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. 40 MM dia.
26.4
-
-
... More
Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. 32 MM dia.
178.2
-
-
... More
Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. 25 MM dia.
11
-
-
... More
Supply of G.I. Class " C " Condenser Water piping, with Split Clamp Pipe supports. 250 MM dia.
99
-
-
... More
Supply of G.I. Class " C " Condenser Water piping, with Split Clamp Pipe supports. 200 MM dia.
81.4
-
-
... More
Supply of G.I. Class " C " Condenser Water piping, with Split Clamp Pipe supports. 150 MM dia.
8.8
-
-
... More
Supply of G.I. Class " C " Condenser Water piping, with Split Clamp Pipe supports. V 125 MM dia.
5.5
-
-
... More
Supply of G.I. Class " C " Condenser Water piping, with Split Clamp Pipe supports. 100 MM dia.
88
-
-
... More
Supply of G.I. Class " C " Condenser Water piping, with Split Clamp Pipe supports. 80 MM dia.
49.5
-
-
... More
Supply of G.I. Class " C " Condenser Water piping, with Split Clamp Pipe supports. 65 MM dia.
27.5
-
-
... More
Supply of G.I. Class " C " Condenser Water piping, with Split Clamp Pipe supports. 50 MM dia.
27.5
-
-
... More
Supply of G.I. Class " C " Condenser Water piping, with Split Clamp Pipe supports. 40 MM dia.
22
-
-
... More
Supply, installation, testing & commissioning of UPVC Schedule 40 Drain piping as per the required Diameter complete with 9mm thick Nitrile Rubber / XLPE Insulation and finished with Alu Foil. 25 mm
50
-
-
... More
Supply, installation, testing & commissioning of UPVC Schedule 40 Drain piping as per the required Diameter complete with 9mm thick Nitrile Rubber / XLPE Insulation and finished with Alu Foil. 32 mm
375
-
-
... More
Supply, installation, testing & commissioning of UPVC Schedule 40 Drain piping as per the required Diameter complete with 9mm thick Nitrile Rubber / XLPE Insulation and finished with Alu Foil. 40 mm
160
-
-
... More
Supply, installation, testing & commissioning of UPVC Schedule 40 Drain piping as per the required Diameter complete with 9mm thick Nitrile Rubber / XLPE Insulation and finished with Alu Foil. 50 mm
175
-
-
... More
Supply, installation, testing & commissioning of UPVC Schedule 40 Drain piping as per the required Diameter complete with 9mm thick Nitrile Rubber / XLPE Insulation and finished with Alu Foil. 65 mm
105
-
-
... More
Supply, Installation, Testing & Commissioning of Copper Refrigerant Piping for DX System. Thickness of copper piping as per manufacturers recommendations. copper piping rate should be including cable tray for laying the piping with GI Cover. The Refrigerant piping shall be completed with Nitrile rubber insulation thickness of 19mm. For DX Hiwall Unit-
60
-
-
... More
Supply, installation, testing, commisssioning of Soft Copper Piping (thickness as per manufacturer's recommendation). The cost shall also include the Nitrile rubber insulation of the pipes with 19mm thick Tubes, joints between the chilled water lines and the copper tubes shall be also finished with the nitrile rubber insulation material. To be used for Chilled Water Cassette Units. 25mm Dia.
200
-
-
... More
Supply,Installation, testing & commissioning of GI Ducting Factory Fabricated with TDF Flanges as per SMACNA. The cost shall include Primary as well as secondary supports. Also all the ducting joints shall be completely sealed with Silicon Sealant, and a leak proof system shall be provided. All supports shall be in G.I. 2250 mm & Above - 18 guage
162.6
-
-
... More
Supply,Installation, testing & commissioning of GI Ducting Factory Fabricated with TDF Flanges as per SMACNA. The cost shall include Primary as well as secondary supports. Also all the ducting joints shall be completely sealed with Silicon Sealant, and a leak proof system shall be provided. All supports shall be in G.I. 1500 mm to 2250mm - 20 guage
147.2
-
-
... More
Supply,Installation, testing & commissioning of GI Ducting Factory Fabricated with TDF Flanges as per SMACNA. The cost shall include Primary as well as secondary supports. Also all the ducting joints shall be completely sealed with Silicon Sealant, and a leak proof system shall be provided. All supports shall be in G.I. 750 mm to 1500 mm-22 guage
2799.9
-
-
... More
Supply,Installation, testing & commissioning of GI Ducting Factory Fabricated with TDF Flanges as per SMACNA. The cost shall include Primary as well as secondary supports. Also all the ducting joints shall be completely sealed with Silicon Sealant, and a leak proof system shall be provided. All supports shall be in G.I. 0 mm to 750 mm - 24 guage
2836.8
-
-
... More
Supply,Installation, testing & commissioning of M.S. Structural Supports with Zinc chromate coating and enamel paint for ducts, Pipes etc.
8000
-
-
... More
Supply, Installation, testing & commissioning of Thermal Insulation as per below thickness for duct with XLPE / Nitrile Rubber Class 'O' for Fire with adhesive and all the joints sealed & finished with Alu Tape The thickness used shall be as under. The insulation shall have factory pasted wrinkled Aluminium Foil finish / UV Stabilised Finish. 13 mm thick
6533.71
-
-
... More
Supply,Installation, testing & commissioning of Acoustic insulation of duct with 10mm thick Armasound (Nitrile Rubber) Insulation Material stuck to the duct using Adhesive and then mechanically fixing to the duct using GI Nuts & Bolts and sealant to seal the leakages.
1071.1
-
-
... More
Supply,Installation, testing & commissioning of Acoustic insulation of duct with 32mm thick Armasound (Nitrile Rubber) Insulation Material stuck to the duct using Adhesive and then mechanically fixing to the duct using GI Nuts & Bolts and sealant to seal the leakages.
600
-
-
... More
Supply,Installation, testing & commissioning of Underdeck Roof insulation with 25 mm thick Nitrile Rubber / XLPE Class "O" for fire, Fixed to the underside of the slab. The slab surface shall be thoroughly cleaned, and adhesive applied to the slab surface and the insulation material, the insulation shall be fixed at 2ft x 2ft grid of self tapping screws. The Insulation shall be temporarily Held by means of adhesive, and reinforce the insulation with GI Lacing wire.
2500
-
-
... More
Supply, Installation , Testing & Comissioning of suitable size PVC Copper Armoured Electrical cables from Main Electrical Panel to Individual Equipments.
Distance Mentioned in the BOQ is the distance between Main Electrical Panel and the equipment. The quoted rate should be including the required Number of Runs for each motor with Double compression glands and lugs for termination. Main Electrical panel to Primary Pump
80
-
-
... More
Supply, Installation , Testing & Comissioning of suitable size PVC Copper Armoured Electrical cables from Main Electrical Panel to Individual Equipments.
Distance Mentioned in the BOQ is the distance between Main Electrical Panel and the equipment. The quoted rate should be including the required Number of Runs for each motor with Double compression glands and lugs for termination. Main Electrical panel to Condenser Pump
80
-
-
... More
Supply, Installation , Testing & Comissioning of suitable size PVC Copper Armoured Electrical cables from Main Electrical Panel to Individual Equipments.
Distance Mentioned in the BOQ is the distance between Main Electrical Panel and the equipment. The quoted rate should be including the required Number of Runs for each motor with Double compression glands and lugs for termination. Main Electrical panel to Secondary Pump
80
-
-
... More
Supply, Installation , Testing & Comissioning of suitable size PVC Copper Armoured Electrical cables from Main Electrical Panel to Individual Equipments.
Distance Mentioned in the BOQ is the distance between Main Electrical Panel and the equipment. The quoted rate should be including the required Number of Runs for each motor with Double compression glands and lugs for termination. Main Electrical panel to Cooling tower Fans
100
-
-
... More
Supply, Installation , Testing & Comissioning of suitable size PVC Copper Armoured Electrical cables from Main Electrical Panel to Individual Equipments.
Distance Mentioned in the BOQ is the distance between Main Electrical Panel and the equipment. The quoted rate should be including the required Number of Runs for each motor with Double compression glands and lugs for termination. Main Electrical panel to Chiller Mototrised Butterfly valve at Chilled Water Side and Condenser water side
100
-
-
... More
Supply, Installation , Testing & Comissioning of suitable size PVC Copper Armoured Electrical cables from Main Electrical Panel to Individual Equipments.
Distance Mentioned in the BOQ is the distance between Main Electrical Panel and the equipment. The quoted rate should be including the required Number of Runs for each motor with Double compression glands and lugs for termination. Main Electrical panel to Cooling tower Motorised valve at inlet and outlet of tower
120
-
-
... More
Supply, Installation , Testing & Comissioning of suitable size PVC Copper Armoured Electrical cables from Main Electrical Panel to Individual Equipments.
Distance Mentioned in the BOQ is the distance between Main Electrical Panel and the equipment. The quoted rate should be including the required Number of Runs for each motor with Double compression glands and lugs for termination. Main Electrical panel to Tube Cleaning system for Chillers
50
-
-
... More
Supply, Installation , Testing & Comissioning of suitable size PVC Copper Armoured Electrical cables from Main Electrical Panel to Individual Equipments.
Distance Mentioned in the BOQ is the distance between Main Electrical Panel and the equipment. The quoted rate should be including the required Number of Runs for each motor with Double compression glands and lugs for termination. Main Electrical panel to Chiller BMS Panel
50
-
-
... More
Supply, Installation , Testing & Comissioning of suitable size PVC Copper Armoured Electrical cables from Main Electrical Panel to Individual Equipments.
Distance Mentioned in the BOQ is the distance between Main Electrical Panel and the equipment. The quoted rate should be including the required Number of Runs for each motor with Double compression glands and lugs for termination. Main Electrical panel to Combo Gauge for Chillers & Pumps
60
-
-
... More
Supply, Installation , Testing & Comissioning of suitable size PVC Copper Armoured Electrical cables from Main Electrical Panel to Individual Equipments.
Distance Mentioned in the BOQ is the distance between Main Electrical Panel and the equipment. The quoted rate should be including the required Number of Runs for each motor with Double compression glands and lugs for termination. Main Electrical panel to Chiller Differential Pressure Switch
60
-
-
... More
Supply, Installation , Testing & Comissioning of suitable size PVC Copper Armoured Electrical cables from Main Electrical Panel to Individual Equipments.
Distance Mentioned in the BOQ is the distance between Main Electrical Panel and the equipment. The quoted rate should be including the required Number of Runs for each motor with Double compression glands and lugs for termination. Busbar Box to Water Cooled Chillers 260TR with suitable Copper flexible Cable.
80
-
-
... More
Supply, Installation , Testing & Comissioning of suitable size PVC Copper Armoured Electrical cables from AHU Electrical Panel to Individual Equipments.
Distance Mentioned in the BOQ is the distance between AHU Electrical Panel and the equipment. The quoted rate should be including the required No. of Runs for each motor with Double compression gland and lugs for termination. AHU Panel to Supply Air motor for AHU
500
-
-
... More
Supply, Installation , Testing & Comissioning of suitable size PVC Copper Armoured Electrical cables from AHU Electrical Panel to Individual Equipments.
Distance Mentioned in the BOQ is the distance between AHU Electrical Panel and the equipment. The quoted rate should be including the required No. of Runs for each motor with Double compression gland and lugs for termination. AHU Panel to Light and Limit Switch of AHU
500
-
-
... More
Supply, Installation , Testing & Comissioning of suitable size PVC Copper Armoured Electrical cables from AHU Electrical Panel to Individual Equipments.
Distance Mentioned in the BOQ is the distance between AHU Electrical Panel and the equipment. The quoted rate should be including the required No. of Runs for each motor with Double compression gland and lugs for termination. AHU Panel to 2 Way PIBCV of AHU
500
-
-
... More
Supply, Installation , Testing & Comissioning of suitable size PVC Copper Armoured Electrical cables from AHU Electrical Panel to Individual Equipments.
Distance Mentioned in the BOQ is the distance between AHU Electrical Panel and the equipment. The quoted rate should be including the required No. of Runs for each motor with Double compression gland and lugs for termination. AHU Panel to Combo display unit of AHU
500
-
-
... More
Supply,Installation, testing & commissioning of Control Cabling between DX Indoor & Outdoor Units. The Control Cable used shall be minimum Sheathed multistranded cable with PVC Conduit properly laid inside the cable tray of the refrigerant piping with proper termination.
40
-
-
... More
Supply,Installation, testing & commissioning of of Power Cabling for all ventilation fans. The power cable used shall be as per manufacturer recommendation with Flexible PVC Conduit and Pin Top.
200
-
-
... More
Supply, Installation, Testing & comissioning of Earthing for all above equipment as per following;
Distance Mentioned in the BOQ is the distance between Panel and the equipment. The quoted price should be including the required Number of Runs for Each equipment with termination. 50 X 6 GI Strip
50
-
-
... More
Supply, Installation, Testing & comissioning of Earthing for all above equipment as per following;
Distance Mentioned in the BOQ is the distance between Panel and the equipment. The quoted price should be including the required Number of Runs for Each equipment with termination 25 X 6 GI Strip
100
-
-
... More
Supply, Installation, Testing & comissioning of Earthing for all above equipment as per following;
Distance Mentioned in the BOQ is the distance between Panel and the equipment. The quoted price should be including the required Number of Runs for Each equipment with termination 25 X 3 GI Strip
100
-
-
... More
Supply, Installation, Testing & comissioning of Earthing for all above equipment as per following;
Distance Mentioned in the BOQ is the distance between Panel and the equipment. The quoted price should be including the required Number of Runs for Each equipment with termination 1C x 1.5 Sqmm - Yellow Bar Green Cable
50
-
-
... More
Supply, Installation, Testing & comissioning of Earthing for all above equipment as per following;
Distance Mentioned in the BOQ is the distance between Panel and the equipment. The quoted price should be including the required Number of Runs for Each equipment with termination 1C x 2.5 Sqmm - Yellow Bar Green Cable
150
-
-
... More
Supply, Installation, Testing & comissioning of Earthing for all above equipment as per following;
Distance Mentioned in the BOQ is the distance between Panel and the equipment. The quoted price should be including the required Number of Runs for Each equipment with termination 1C x 4 Sqmm - Yellow Bar Green Cable
150
-
-
... More
Supply, Installation, Testing & comissioning of Earthing for all above equipment as per following;
Distance Mentioned in the BOQ is the distance between Panel and the equipment. The quoted price should be including the required Number of Runs for Each equipment with termination 1C x 6 Sqmm - Yellow Bar Green Cable
150
-
-
... More
Supply, Installation, Testing & comissioning of Earthing for all above equipment as per following;
Distance Mentioned in the BOQ is the distance between Panel and the equipment. The quoted price should be including the required Number of Runs for Each equipment with termination 1C x 10 Sqmm - Yellow Bar Green Cable
80
-
-
... More
Supply, Installation, Testing & comissioning of Earthing for all above equipment as per following;
Distance Mentioned in the BOQ is the distance between Panel and the equipment. The quoted price should be including the required Number of Runs for Each equipment with termination 1C x 16 Sqmm - Yellow Bar Green Cable
50
-
-
... More
Supply, Installation , Testing & comissioning of 14G Perforated cable tray, duly galvanised with necessary supporting members for suspension to slab / wall supporting with final finishing. All the Cable trays shall be provided with GI Cover. Perforated Type - 600 mm x 50 mm
50
-
-
... More
Supply, Installation , Testing & comissioning of 14G Perforated cable tray, duly galvanised with necessary supporting members for suspension to slab / wall supporting with final finishing. All the Cable trays shall be provided with GI Cover. Perforated Type - 450 mm x 50 mm
50
-
-
... More
Supply, Installation , Testing & comissioning of 14G Perforated cable tray, duly galvanised with necessary supporting members for suspension to slab / wall supporting with final finishing. All the Cable trays shall be provided with GI Cover. Perforated Type - 300 mm x 50 mm
100
-
-
... More
Supply, Installation , Testing & comissioning of 14G Perforated cable tray, duly galvanised with necessary supporting members for suspension to slab / wall supporting with final finishing. All the Cable trays shall be provided with GI Cover. Perforated Type - 200 mm x 50 mm
100
-
-
... More
Supply, Installation , Testing & comissioning of 14G Perforated cable tray, duly galvanised with necessary supporting members for suspension to slab / wall supporting with final finishing. All the Cable trays shall be provided with GI Cover. Perforated Type - 150 mm x 50 mm
50
-
-
... More
Supply, Installation , Testing & comissioning of 14G Perforated cable tray, duly galvanised with necessary supporting members for suspension to slab / wall supporting with final finishing. All the Cable trays shall be provided with GI Cover. Perforated Type - 100 mm x 50 mm
50
-
-
... More
Supply, Installation , Testing & comissioning of 14G Perforated cable tray, duly galvanised with necessary supporting members for suspension to slab / wall supporting with final finishing. All the Cable trays shall be provided with GI Cover. Perforated Type - 50 mm x 50 mm
50
-
-
... More
Supply, Installation , Testing & comissioning of chiller plant manager with required cabling and other accessories
1
-
-
... More
LV SYSTEM WORKS
-
-
-
... More
Supplying, installing, testing and commissioning of Rack Mounted, Digital (Hybrid) type expandable EPABX in multi slot chassis or modular stackable type as per the technology complete with basic capacity of 2xPRI, 8xTCO, to cater to minimum 64/ 60 nos instruments as per manufactureres standard for Digital 6 (2 Now+4 Future), 53 SLT (46 Now+7 Future) and Operator console (1 Now) * Power supply * Expansion modules of 8/16 or 30 SLT connections, connection for operator console as per the manufacturer's standard, with necessary RJ45 connectors, for connection to MDF. DTE port for connection to PC * VPN connection port on CPU for interconnection to CPUs & sharing capacity * Voice Mail facility * IVR facility\ * Flash card for BGM facility.
1
-
-
... More
Supplying, Installing, Testing & commissioning of Call Billing, IP EPBAX Management & Reporting software loaded on common server.
1
-
-
... More
Supplying, installing, testing and commissioning of Operator Console with 2 Line 24 Chr display, with programmable 24 key Direct Station Selection for single touch access to TCO, DKP, SLT, with head set interface, suitable for programing & reconfiguration & configuration of new / relocation of extensions.
1
-
-
... More
Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinetfabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required. 40 Pair
2
-
-
... More
Supplying, erecting and commissioning of Discoonection type Krone Module, ITD/ DOT approved, having capacity of 10 pairs with silver plated terminal contacts, complete as required.
8
-
-
... More
Supplying, installation and testing of suitable size modular GI box, modular plate and cover complete with RJ-11 connector (modular telephone socket) including concealed metal box/ surface GI/ PVC Box, modular plate, punching, identifying, complete as Required. CAT B
53
-
-
... More
Supplying, installing, testing & commissioning approved type Analogue Push button telephone instrument, desk top/ wall mount with caller ID unit as per specification in approved manner.
52
-
-
... More
Supplying, installing, testing and commissioning of indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/ DOT approved, with GI saddles on wall or in the existing surface/recesed steel/ PVC conduit having folowing pair(s), complete as required. 2 Pair
1118
-
-
... More
Supplying, installing, testing and commissioning of indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/ DOT approved, with GI saddles on wall or in the existing surface/recesed steel/ PVC conduit having folowing pair(s), complete as required. 50 Pair
30
-
-
... More
Supplying, installing, testing and commissioning of indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/ DOT approved, with GI saddles on wall or in the existing surface/recesed steel/ PVC conduit having folowing pair(s), complete as required. 100 Pair
15
-
-
... More
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface (medium)/ recess (heavy) including cutting the wall and making good the same in case of recessed conduit as required. (For Telephone, CCTV, DATA, PA, Attendance & AV systems) 25 mm
1458
-
-
... More
Supplying and laying (including excavation) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/ road surface, to required depth complete.
100
-
-
... More
Construction of Chamber of inner size 600mm X 600mm, 750mm deep comprising of 230mm thick brick walls using first class country brick walls in CM 1:5 over a bed of 100mm thick PCC 1:3:6 concrete with 100mm projections all around beyond the masonry faces, plastered with CM 1:3, mixed with waterproofing compound as per manufacturer's specifications 12mm thick on internal, external, top surfaces and internal and top exposed surfaces finished smooth with a floating coat of neat cement, supplying & errecting RCC cover of size 700 X 700mm X 50mm thk. with lifting arrangement including laying of MS angle frame of angle size 50x50x6mm, fixing/ embedded the frame in CC 1:2:4, etc, complete all as specified and directed by Engineer-in-charge.
5
-
-
... More
Supplying, Installing, Testing & commissioning of Indoor PoE IR Dome Camera, 20M IR distance, IP66, 10/ 100 Base T LAN, ONVIF, PoE (IEEE 802.3 af compliant), Day/ Night, Motion based recording, 1/3" CMOS sensor, 0.2 min. lux for colour & 0.1 Lux for monochrome, 16:9 aspect, 1920x1080 , 25 / 30 FPS, H.264 video compression, manual focus with following lense features of Contrast/ Sharpness/ White Balance/ WDR/ Privacy masking, power supply, Wall/ false ceiling mounting with all necessary acceseries with licensed software for VM management.
40
-
-
... More
Supplying, Installing, Testing & commissioning of 2 MP Outdoor IP, IR Dome Camera, 20M IR distance, IP67, 10/ 100 Base T LAN, ONVIF, PoE (IEEE 802.3 af compliant), Day/ Night, Motion based recording, 1/3" CMOS sensor, 0.2 min. lux for colour & 0.1 Lux for monochrome, 16:9 aspect, 1920x1080 , 25 / 30 FPS, H.264 video compression, manual verifocus 2.8mm-12mm with following lense features of Contrast/ Sharpness/ White Balance/ WDR/ Privacy masking, power supply, Wall/ false ceiling mounting with all necessary acceseries with licensed software
5
-
-
... More
Supplying, Installing, Testing & Commissioning of Rapid Speed dome, Indoor PTZ PoE Camera,1920x1080, IP66, 10/ 100 Base T LAN, PoE (IEEE 802.3 af compliant), ONVIF Profile , Day/ Night, Motion based recording, 1/3" CMOS sensor, 360 Deg Pan, 10-90 Deg Tilt, Adjustable Pan/ Tilt speeds of 0.1° TO 50°/ Sec to 0.15 Lux min for colour & 0.01 Lux for monochrome, 16:9 aspect, 25 / 30 FPS, 20 x Optical zoom, 8 x Digital zoom, H.264 video compression, Automatic Iris control, Motorized focus control, Varifocal 4.3mm to 89mm Lens, features of Contrast/ Sharpness/ WDR/ White Balance, Zone Privacy masking, DC / AC power supply with vendor adapter, Programable auto tour, PTZ control by KVM from NVR/ Client viewing machine. Wall/ false ceiling mounting with all necessary acceseries.
4
-
-
... More
Recording & Playback licensed software for Video Management System for continuous/ scheduled/ event & motion trigger record, minimum 4 Channel 4 CIF live camera playback with Recording.
1
-
-
... More
Supplying, installing, testing & comissioning of rack mount, ONVIF support Network Video Recorder suitable for 3MP, 32 input channels for 25 FPS at minimum 4 CIF simultaneous recording in RAID 1 & H.264/ MPEG/ MJPEG, with continuous/ scheduled/ event & motion trigger record, minimum 4 Channel min 4 CIF live playback, with Recording & VMS LINUX servers with Intel Core I-5, 4 GB RAM, with cross platform for Client Windows OS, Software & hardware watchdog, PTZ control, I/O interface 2*RJ45 Gig ports/ RS232- 1no. & RS485-1no./ USB ports -3 nos, 240V AC 160W, internal storage minimum 32 TB, 7200 RPM SATA,
IN case the NVR has separate VMS software the same should be included in package & loaded on client viewing with license for cameras (if required)
2
-
-
... More
Supplying, Installing, Testing & Commissioning of Client Viewing Machine with 72 camera license having Intel Duo Core I-5 Processor, 2.6 GHZ, System Memory 4GB DDR3, HDD 3.5" 250GB, 2 GB NIC, N Vidia 1 GB Graphic card (Open GL 2.0), 64bit, Windows server Professional 2008, Windows media Player version 9, Optical DVD-R, HUI of 102 key Keyboard & Optical Mouse, McAfee virus scan 8/ Symantek Anti Virus V10, RAID level 1, USB: 8 external USB Ports (4 front, 4 back); 2 USB 3.0 via add-on cards, • Audio: Six back-panel connectors: microphone-in, line-in, and 4 line-out to support, 7.1 audio jack; two front-panel connectors for headphone-output and microphone-in,Other: 2 x HDMI, VGA port, S/ PDIF connector, eSATA, RJ-45 (10/100/1000 Ethernet)
1
-
-
... More
Supply, Installation, Testing, commissioning of Layer 3, fully Managed & loaded LAN 10/ 100/1000, 8+2 RJ45 gB +2 Combo PoE switch having 20 gbps bandwidth 14.88 Mpps, 1U rack mount with accessories with all L3 features of Multicasting,VLAN etc(Mounted in common data switch racks)
1
-
-
... More
Supply, Installation, Testing, commissioning of Layer 2, fully Managed & loaded LAN 10/ 100, 24+2 RJ45 gB +2 Combo PoE switch having 12.8 gbps bandwidth 9.5 Mpps, 1U rack mount with accessories with all L2 features of Multicasting,VLAN etc(Mounted in common data switch racks)
3
-
-
... More
Supply, Installation, Testing, commissioning of Layer 2, fully Managed & loaded LAN 10/ 100, 8+2 RJ45 gB +2 Combo PoE switch having 12.8 gbps bandwidth 9.5 Mpps, 1U rack mount with accessories with all L2 features of Multicasting,VLAN etc(Mounted in common data switch racks)
1
-
-
... More
Supply, Installation, Testing, Commissioning of Wall bracket mounted Professional grade 40” LED camera display screen for Workstation operated panel 1920x1080,16:9 aspect, 350 nits, 5000:1 contrast, 1780 H/V, VGA/ DVI-D/ HDMI input, RS232C In/ Out, Narrow Bazel, Built in audio.
1
-
-
... More
Supplying, installation and testing of suitable size modular GI box, modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/ surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT B
50
-
-
... More
Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required Cat 6
2760
-
-
... More
Supplying & installing UTP networking Cat-6 cable Extender from 70 M to 390 M (For DATA, CCTV & PA system)
11
-
-
... More
Supplying, Installing, Testing & Commissioning Integrated & Performance proving of Campus Internet modular router for 50 Nodes / 100 (Light/ Mid/ Heavy) users on 300 Mbps ISP leased line with CPU of 32 MB flash memory, 128 MB SD RAM, EPROM 512 kB, 2xWAN port, 4x10/100/1000 ethernet port, 1x console port, minimum 2 x expandable module slots with features of data link layer, network layer, routing, security reliability, QoS, network management.
1
-
-
... More
Supplying, Installing, Testing & Commissioning Integrated & Performance proving of UTM Enterprise class licensed Internet Fire Wall with 12 configurable ports, 300 Mbps firewall/ VPN 60 Mbps/ Antivris 50 Mbps through put /40000 concurrent sessions, High availability, bandwidth management, IDP/ IPS, Traffic load balancing, content filtering, virus screening, licenses & warranty etc.
1
-
-
... More
Supplying, Installing, Testing & Commissioning Integrated & Performance proving of Network Administrator Desk top for Network Management with Quad Core Intel Xenon 3400, 3.0 GHz, System Memory (RAM) 4 GB, DDR3 ECC SDRAM, Optical Drive: DVD-R, Hard Disk Drives 3.5” SATA 7200 RPM 250GB, 20G available space, Network Interface Card Dual, Human Interface: Graphics Adapter NVIDIA 1GB Independent Graphic Card, Preloaded OS Original windows software, 19" LED monitor, 102-keys keyboard and a mouse pointing device, etc.
1
-
-
... More
Supplying, Installing, Testing & Commissioning Integrated & Performance proving of Server for OS / Application Software / Data storage in Raid 1 for (Network management utility+Email +Biometric Attendence +Telephone billing) having 2.8 GHZ-6 core-12 Threads, 256 MB Cache with 4x2TB, 3.5" Hard disc complete with Network Controller, Enterprise Baseboard Remote Management Controller & Storage controller, Redundant power supply.
1
-
-
... More
Supplying, Installing, Testing, Commissioning & Performance proving of Core switch at network edge for 300 end users, made up of 1x stacked switch of 10/100/1000-24 access ports & 1x stacked switch of 10/100/1000-8 access ports with 2SFP up link ports each rack mounted on Ground floor servillance room & complete in all respect with fabric switch supervisor software, memory, power cords, redundant power supply etc.
1
-
-
... More
Supplying, Installing, Testing, commissioning of FULLY MANAGED & loaded Layer 3, 24 P, 10/100/1000, Non PoE switch, 92Gbps/ 68.45Mpps, with Min. 24 access ports, with device management licensed software, 2Gb + 2xCombo uplink ports with key Features of Performance, Management, Security, Multicating, VLAN etc.
1
-
-
... More
Supplying, Installing, Testing, commissioning of FULLY MANAGED & loaded Layer 2, 24 P, 10/100 Non PoE switch, 17.6Gbps /13.1 Mpps, with Min. 24 access ports, with device management licensed software, 2Gb + 2xCombo uplink ports with key Features of Performance, Management, Security, Multicating, VLAN etc.
4
-
-
... More
Supplying, Installing, Testing, commissioning of 24 port Patch Panel with toolless keystone jacks in provided U Rack complete. (For CCTV & DATA)
9
-
-
... More
Supplying, Installing, Testing, commissioning of 1 meter length, UTP Patch cord of Cat 6 type in position. (For CCTV & DATA)
99
-
-
... More
Supplying, Installation, Testing, commissioning of 3 meter length, UTP Patch cord of Cat 6 type in position.
54
-
-
... More
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT B
54
-
-
... More
Supplying, erecting, Testing & Commisioing of Supplying 9U Wall Mount Rack (Dimension-DxWXH – 450X550X500 mm) as per specification in approved manner (For Telephone, DATA, CCTV & PA)
4
-
-
... More
Supplying, Erecting, Testing & Commisioing of Supplying 42U Wall Mount Rack (Dimension-DxWXH – 450X550X635 mm) as per specification in approved manner (For DATA, CCTV & PA)
1
-
-
... More
Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.200mm width x 50mm depth
1
-
-
... More
Supplying, installing, testing and commissioning of Card / Finger Print Reader with 500 templates, 30000 transactions, LCD screen, RS485 / RS232 / Ethernet communication, card / finger print registration, web server support, 230V AC UPS supply, 12V Dc internally derived power supply through included adapter, less than 2 second enrollment time.
1
-
-
... More
Supplying, installing, testing and commissioning, registration of first time biometric templates & issue of swipe card in a plastic case & ribbon data for employees.
100
-
-
... More
Supplying, installing, testing and commissioning of Customized Attendance equipment lifetime licensed Software.
1
-
-
... More
Supplying, installing, testing and commissioning in position of wall mount, light weight, sturdy, Motorised projector screen black masking border, front white with black back,manual opened with spring loaded return 2400MM (W) and 1800MM (H) for use with LCD projector with all necessary hardware fittings, labour, complete.All the materials shall be of approved make.(Suvira/Liberty/Leegrand)
2
-
-
... More
Supplying, installing, testing and commissioning in position of approved 3000 / 3400 ANSI lumens ceiling mounted Projector , Native WXGA (1,280x800) resolution. Ideal for medium room Multimedia projection, Auto power saving with brightness adjustment and lamp dimming, Long-lasting lamp, HDMI input, Digital Video input, Ideal for medium room data / video projection. Including Ceiling Mount Kit of suitable size, VGA cable, power cable and other cables, 1 RCA and all necessary hardware fittings, labour, complete. All material shall be of approved make (Panasonic/Samsung/Epson/Hitachi/ Vivitek)
2
-
-
... More
Supplying, installing, testing and commissioning Intel Core I-7 Processor, 7th Geneation, 3.6 GHZ, System Memory 8GB DDR3, 2*2 TB HDD, 2 GB Graphic Card, Keyboard & Mouse, DVD RW, RJ-45 (10/100/1000 Ethernet), Windows 10 Professional Operating System, 19.5” Monitor , Mini Tower Cabinet. ( DELL / HP / ACER )
2
-
-
... More
Supplying and errecting HDMI cable with connector hardware in the existing surface/ recessed steel/ PVC conduit as required.
50
-
-
... More
Supplying of Wall bracket mounted 55” size Commercial/Hospitality grade. LED TV Smart Screen Panel, UHD (3840x2160),350 nits minimum,VNB (13mm Bezel),16:9 aspect ratio,20 W -2CH Audio, HDR, 1400 PQI,1780 H/V, Ports-3 xHDMI, 2xUSB, Composite In, Component In, Digital Audio out,with remote with batteries,Firmware MagicINFO Player S4 compatible with MagicINFO server.
25
-
-
... More
Supplying, Installing, Testing, Commissioning of WiFi Controller - software based up to 100 nos. of 802.11 a/b/g/n/ac APs, located on WIFI desk top, with real time analytics,WLAN management features,User authtication, guest portal,Hot spot features,8 SSIDs/radio,system management,Wireless features, security, end to end encription, data privacy.
1
-
-
... More
Supplying and fixing manageable wireless 2x2 Mesh Router, 50 m range, dualband 802.11 n/ac unified wireless access point complete as per specification no.WG-NAS/LAP1
8
-
-
... More
Supply, Installation, Testing & commissioning Controller of 3.5" colour LCD screen, with numerical buttons, PoE connected & wired to Door E/M Lock & exit button, finger print registration, web server support, 230V AC supply, 12V DC internally derived power supply, less than 2 second enrollment time, Door status / Alarm / Rex / Door lock / wired door bell / multiuser verification, Controller Software, complete as per technical Specification.
3
-
-
... More
Supply, Installation, Testing & commissioning of reader with all required accessories for access control operation.
12
-
-
... More
Electromagnetic Door lock
12
-
-
... More
Exit Push Button
12
-
-
... More
1.5 Sqmm X 6 Core Flexible Cable
100
-
-
... More
Automatic Boom Barrier - Straight - 3 M clear opening of Boom Arm 5.7 M, DC Motor, Casing is made up of GI & boomis made up of AL with CE certified as per Eurpean Standards EN 61000-6-1 -2007 /2008 having having protection grade of IP 55 with Manual Push Button for over riding loop detector function & Boom Stand. Accessories for Boom Barrier : a) Safety Photocell (Pair) Tx-1 no. & Rx-1 no. Qty - 1 Pair b) Loop Detector-Dual Channel with two induction loop Qty - 1 No c) Remote Control with receiver Qty - 1 No
2
-
-
... More
Feedback Collection Devices: Besides touch-screen kiosks, other devices such as tablets or smartphones can be used to collect feedback from customers. These devices should have appropriate survey software installed.
Data Analytics and Reporting Tools: Software or tools for analyzing survey data, generating insightful reports, and visualizing the feedback trends.
Integration with CRM or POS Systems: Integration with customer relationship management (CRM) or point-of-sale (POS) systems to link feedback data with customer profiles, purchases, or loyalty programs for a holistic view of customer experience.Notifications or Alerts: A system to provide notifications or alerts to the management team in real-time whenever specific feedback thresholds or critical issues are encountered.
Customer Satisfaction Measurement Metrics: Tools or methodologies to measure overall customer satisfaction, such as Net Promoter Score (NPS), Customer Satisfaction Score (CSAT), or Customer Effort Score (CES).
Continuous Improvement Mechanism: A process to track feedback trends, identify areas for improvement, and implement changes accordingly.
Continuous Improvement Mechanism: A process to track feedback trends, identify areas for improvement, and implement changes accordingly.
It ought to encompass every accessory required for the system to become whole and operational.
1
-
-
... More
All works should be according to section 16790-BMS Specification attached to this section.With all hardware & software required to install & operate BMS system. Labeling according to specification 16075-Electric identification.Including all RS-485, LonWorks Twisted Pair, Cat6 Ethernet and any other cabling connection.It ought to encompass every accessory required for the system to become whole and operational.
1
-
-
... More
Supply & installation of 10 kVA ,3Ph IN - 1Ph OUT true Online UPS System in standalone configuration with advance DSP based technology’ Double conversion IGBT Rectifier and IGBT based inverter UPS system with cabinet and SMF battery backup for 60 mins. using 12V batteries including battery protection M.S Rack suitable dimension, standard rating cable for interlinks cable and D.C cable up to standard Length in mtrs from UPS to batteries including labour charges for installation testing and commission and carrying charges.
1
-
-
... More
Hardware Requirement-
Minimum 32-inch touch-enabled LCD display with at least Full HD resolution.Powerful CPU, with a minimum of quad-core or higher.Minimum 4GB RAM to ensure smooth performance.Adequate storage capacity for storing interactive applications and content.Multi-touch capacitive touchscreen, keyboard, and mouse.Built-in speakers for delivering sound/music.
Software Requirements:-
Latest stable version of a popular operating system like Windows or Linux.User-friendly interface with intuitive navigation and attractive visuals.An up-to-date web browser capable of rendering modern web pages and supporting HTML5.A robust CMS to manage and update kiosk content easily.Ability to play videos, images, and audio files smoothly.Firewall, antivirus, and regular software updates to protect against security threats.Ability to connect with the mall's central database to display up-to-date store information, promotions, and events.
It ought to encompass every accessory required for the system to become whole and operational.
8
-
-
... More
The interactive touchscreen map should have a high-resolution display capable of displaying detailed maps and navigating through various sections of the mall. The display size can vary depending on the installation location but should be large enough to provide a clear view for users.The map should feature a capacitive or infrared touchscreen technology. The map should allow users to easily search for specific shops, facilities, or services within the mall.The map should be integrated with the mall's backend systems, such as the directory management system. The map should implement appropriate security measures to protect user data and prevent unauthorized access. It ought to encompass every accessory required for the system to become whole and operational.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements