Electricity Department Tender
... More
The Electricity Department has issued a formal invitation for competitive bids for Work Of Reconductoring Strengthening Of Lt Lines In The Areas Of V.p. Priol Cuncoliem, Veling At Mardol Under Tribal Welfare Scheme, In The Jurisdiction Of Sub Division-iii Division- X Ponda. in South Goa, Goa, with an estimated contract value of Rs. 6,74,90,978. The bid opening date for this tender is 14-12-2024 and the last date for bid submission is 03-01-2025. Interested bidders for Electricity Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Costs
EMD
₹ 13,49,820Document Cost
₹ 1,500Tender Fee
₹ 6,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_ED_18942_1Bid Award Id
ViewTender No
Tender No 36(2024-25)/CSCTender Authority
Electricity Department ViewPurchaser Address
-Website
http://eprocure.goa.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
FRP Fencing complete with Gate as per specification for Distribution Transformer (Size 4Mx3Mx2M) with Concreting for FRP Fencing supports with plinth (0.3x0.3x0.5) Cu.m, x 12 nos. Each ratio 1:3:6
13
35000
455000
... More
Removing and re-erection of 30 watts Led lights (existing fixtures)
152
360
54720
... More
Supply of HDGI stay clamps for RCC Pole 11.OO Mts L.A/S.A, (Dimensions/specifications as per drawing no. CEE/E-711) [Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas]
28
621
17388
... More
Erection of PVC wire 2C x 6sq.mm 1.1 KV Grade
1800
9
16200
... More
Supply, transportation, filling and packing by ramming of rubble of hard laterite stone under floors including watering & consolidating with earth and backfilling of poles and stays.
298.27
811
241896.97
... More
Supply of AA CONDUCTOR
Hard drawn stranded all aluminium conductor conforming to IS: 398(Pt-I/96) as amended upto date of following sizes.
Packing and marking of drum will be as per IS:
Materials shall be supplied on non-returnable wooden drums.
Acceptance tests and routine tests shall be carried out at manufacturers works and test reports shall be furnished before supply of materials.
The Department reserves right to witness all the above tests.
ANT' conductor 7/3.10 mm nominal aluminium area 50mm2 (190 amps max. at 40° C)
254.9
60500
15421450
... More
Erection, testing and commissioning of 200 KVA 11KV/0.4KV Distribution Transformers level II losses, Alluminium Winding, with Bimetallic Terminal Connectors, Energy Efficiency Level-TT as per IS: 1180 (Part-1): 2014
7
15638
109466
... More
Removing of the existing 7.5 m RCC pole
167
2600
434200
... More
Supply of Cut point 'X' arm of channel of ISMC 75 (75 x 40 mm) 1.3 Mtr long for
11KV, Cross arm not to be welded/joined at any place.
Guard 'X' arm of channel ISMC 75 (75 x 40 mm) 1.5 Mtr Long for 11KV, Cross arm not to be welded/joined at any place.
[Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas]
14
4155
58170
... More
Supply of HDGI X arm clamps for RCC Pole 11.00 mtr L.A/S.A, (Dimensions/specifications as per drawing no. CEE/E-711) [Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas]
196
414
81144
... More
Supply of LIGHTNING/SURGE ARRESTORS (As per specifications enclosed)
Lightning/Surge Arrestors 9 KV, 5 KA nominal discharge current Metal Oxide gapless distribution class lightning arrestor conforming to IEC-60099-4 and IS 3070 Part 3 1993 as amended upto date suitable for 11 KV 50 HZ effectively earthed neutral system with necessary mounting arrangements and connector suitable to connect ACSR conductor upto overall diameter 12.30 mm.The marking of the Lightning Arrestors shall be as per IS The Acceptance tests and routine tests shall be carried out at the manufacturers works and test reports shall be furnished before supply of materials.
42
3033
127386
... More
Supply of HDGI 11 KV V-shape 'X' arm of channel ISMC 75 (75 x 40mm) [Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas]
42
1469
61698
... More
Supply of FRP Fencing complete with Gate as per specification for Distribution Transformer (Size 4Mx3Mx2M) with Concreting for FRP Fencing supports with plinth (0.3x0.3x0.5) Cu.m, x 12 nos. Each ratio 1:3:6
13
76667
996671
... More
Tree cutting ,dragging of pole etc
1
150000
150000
... More
Supply of L.T. Pin Insulators
L. T. brown glazed porcelain pin insulators of size 100mm x 70mm conforming to type 1 fig 1 of IS:1445/1977 with amendment 2 of Feb. 1981 (second revision) as amended upto date. Minimum failing load shall be 3.5kN.
Insulators shall have marking and packing as prescribed in IS. Acceptance tests and routine tests shall be carried out as per IS at manufacturers works and test results shall be furnished by the manufacturer before supply of materials.
G.l. Pin for L.T.Pin InsulatorsForged G. I. Pin conforming to IS 7935/1975 as amended upto date suitable for L.T. porcelain pin insulator type 1 conforming to fig.l of IS: 1445/77 with amendment No. 2, Feb.1981, of size 100 x 70 mm. G. I. pin shall comprise of G. I. nut and spring washer and con form to fig. No. 2 of IS: 7935/1975. Minimum failing load of pin shall be 3.5 KN. The fitting shall be marked with the manufacturer’s name or trade mark as per IS. The packing shall be as per IS. G. I. pins and nuts shall be hot dip galvanized as per IS: 2629/66 as amended up to date. The washers shall be electro galvanized.Acceptance tests and Routine tests shall be carried out at the manufacturers works and test reports shall be furnished before supply of materials.
3966
263
1043058
... More
Removing of old existing 11 KV disc insulators
42
187
7875
... More
Ffabrication, transportation and erection of Hot dip galvanised DP structure material consisting of the following:
4680
47
219960
... More
Supply of HDGI Top fitting cross arm ISMC channel, ISMC 75 (75 x 40mm),
0.7mts long for 11KV, Cross arm not to be welded/joined at any place.
[Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas]
14
819
11466
... More
Supply of HDGI X arm clamps for RCC Pole 7.50 mtr L.A/S.A, (Dimensions/specifications as per drawing no. CEE/E-711) [Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas]
1643
184
302312
... More
Fixing of HDGI stay clamps for RCC Pole 11.OO Mts L.A/S.A, (Dimensions/specifications as per drawing no. CEE/E-711)
28
98
2744
... More
Supply of G.I stay rod & plate LT/11KV line [Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas]
679
2404
1632316
... More
HDG.I stay wire 7/10 SWG
The stay wire shall comply with the specific requirements of IS:2141-1979, IS:4826-1979 & IS:6594-1974 or the latest versions thereof.The wires shall be of tensile grade 4 & having minimun tensile strength of 700 N/mm2 conforming to IS:2141 HDGI stay wire standard of size 7/3.15mm(7/10SWG) wire should conform to ISS-2414/68 grade I and hot dipped galvanized as per IS 4826/1968 with up to date amendments (Galvanizing should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sqmtr,140 microns DFT), suitable for high salinity coastal areas.
4989
62
309318
... More
Supply of HDGI BARBED WIRE FOR ANTICLIMBING DEVICE: Hot dip galvanized steel barbed wire type 4 conforming to IS:278/1962 as amended up to date and galvanization conforming to IS: 4826/1979 as amended up to date. ( Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000gms/sq.mtr, 140Microns DFT). suiatble for high salinity coastal areas, Nominal distance between the two barbs shall be 150mm. Tests as oer IS shall be carried out at the manufactures work & test reports shall be furnished before supply of materials.
28
145
4060
... More
Suppply of HDGI 4 pin 'X' arm ofISMC 75 (75 x 40mm) Channel 1.5 mtr length, Cross arm not to be welded/joined at any place, Galvanising should be hoi dipped (Dimensions/specifications as per drawing no: CEE/E/705).
[Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas]
1112
1109
1233208
... More
Fixing of HDGI X arm clamps for RCC Pole 9.00 mtr L.A/S.A, (Dimensions/specifications as per drawing no. CEE/E-711)
68
45
3060
... More
Removing of the existing Old deteriorated ANT conductor as per technical specification.
224.9
5150
1158235
... More
Removing of old 100 kva Distribution Transformer
7
5508
38559.5
... More
Removing of old existing Lightening arrestors
42
87
3654
... More
Supply of PVC wire 2C x 6sq.mm 1.1 KV Grade
1800
32
57600
... More
Removing of the existing feeder cable of sizes 3 ½ core 185sq.mm/120sq.mm/90sq.mm /35sq.mm
14
114
1596
... More
L.T. Pin Insulators
L. T. brown glazed porcelain pin insulators of size 100mm x 70mm conforming to type 1 fig 1 of IS:1445/1977 with amendment 2 of Feb. 1981 (second revision) as amended upto date. Minimum failing load shall be 3.5kN.
Insulators shall have marking and packing as prescribed in IS. Acceptance tests and routine tests shall be carried out as per IS at manufacturers works and test results shall be furnished by the manufacturer before supply of materials.
G.l. Pin for L.T.Pin InsulatorsForged G. I. Pin conforming to IS 7935/1975 as amended upto date suitable for L.T. porcelain pin insulator type 1 conforming to fig.l of IS: 1445/77 with amendment No. 2, Feb.1981, of size 100 x 70 mm. G. I. pin shall comprise of G. I. nut and spring washer and con form to fig. No. 2 of IS: 7935/1975. Minimum failing load of pin shall be 3.5 KN. The fitting shall be marked with the manufacturer’s name or trade mark as per IS. The packing shall be as per IS. G. I. pins and nuts shall be hot dip galvanized as per IS: 2629/66 as amended up to date. The washers shall be electro galvanized.Acceptance tests and Routine tests shall be carried out at the manufacturers works and test reports shall be furnished before supply of materials
3966
173
686118
... More
Supply of HDGI X arm clamps for RCC Pole 9.00 mtr L.A/S.A, (Dimensions/specifications as per drawing no. CEE/E-711) [Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas]
68
266
18088
... More
Supply of FRP Fencing complete with Gate as per specification for Distribution Transformer (Size 3Mx3Mx2M) with Concreting for FRP Fencing supports with plinth (0.3x0.3x0.5) Cu.m. x 12 nos. Each ratio 1:3:6
18
71167
1281006
... More
Supply of single core, 185sq.mm, unarmoured Al conductor XLPE insulated 1.1KV grade power cable as per Technical Specification and as per IS:7098 (Part-I/1988) with latest ammendment carrying ISI mark.
3960
245
970200
... More
Supply, fabrication, transportationof Hot dip galvanised DP structure material [Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas]
4680
169
790920
... More
Supply and Fixing of Break insulators 8KV(44KN): Guys strain insulators of sizes 90x65mm with minimum failing load of 44 KN and minimum creepage distance of 41mm. Conforming to fig1 and designation "A" of IS:5300/1969 as amended upto date. Insulators shall have marking and packing as prescribed in IS. Accepatance tests and routine tests shall be carried out as per IS and test results shall be furnished by the manufacturer before supply of materials.
679
176
119504
... More
Removing of old existing distibution box
14
3141
43974
... More
Removing of old existing GOAB switch
14
1985
27797
... More
Removing of old existing structure materials as per technical specification.
1512
23
35532
... More
Supply of M. S. distribution box
As per drawing No.CEE/E-689 Revision No.3 alongwith 12 nos. of 200A Kitkat Porcelain fuse carrier and base with extended terminals conforming in general to drawing No.EE-II/7/2002 with 1 no. moulded case circuit breaker (MCCB), 415V, AC, 50Hz with extended terminals conforming to IS 13947-2 as amended upto date.
Distribution Boxes (M.S) with 200Amps MCCB & Kit-Kat fuses
19
48387
919353
... More
Erection of FRP Fencing complete with Gate as per specification for Distribution Transformer (Size 3Mx3Mx2M) with Concreting for FRP Fencing supports with plinth (0.3x0.3x0.5) Cu.m. x 12 nos. Each ratio 1:3:6
18
33667
606006
... More
Removing and re-erection of 50 watts Led lights (existing fixtures)
46
600
27600
... More
Supply of 11 KV H. G. fuse unit shall be as per enclosed drawing No. CEE/E-672 and CEE/E-641 and detailed specifications enclosed herewith Routine tests and acceptance for post insulators as per IS-2544-1973 as amended upto date and shall be carried out at the manufacturers works and test reports shall be furnished before supply of materials. Base channel of 75x40 mm (ISMC), I4DGI, Insulator 11KV: 3.4.1 The isolators shall be provided with 6 nos. of 24 kV post insulator per pole for 36 kV and 3 nos. of 24 kV post insulator per pole for 12 kV. There will be total of 18 such post insulators in one set of isolator for 36 kV and 9 such post insulators in one set of isolator for 12 kV. These insulators shall conform to latest amendment of IS: 2544 and IS: 5350 (Part-Ill). Aluminium connector with bi-metallic strip, Homs: Copper (tinted) of 7mm dia, Whisel of copper alloy, fly nut with bolt of brass for connecting fuse wire Earthing terminal with GI nut bolt and plain washer on base channel, Hom holder of copper alloy, Pad of copper alloy
The vertical operating rod shall comprise of 40 mm galvanized steel tube (medium class) as per IS: 1161. Length of the rod shall depend on the mounting position of the isolator. Operating handle shall be fixed to the concrete structures (approx. 1 meters above the ground level.). The vertical tube shall be galvanized as per IS: 4736
The entire unit should be supplied from one supplier/ of same make, assembled GOAB switch not to be accepted Galvanising of all the materials used should be hot dipped Galvanised as per IS:2629/66, (Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas)
H.G. Fuse unit 11 KV 200 Amps
14
10450
146300
... More
Fixing of HDGI X arm clamps for RCC Pole 7.50 mtr L.A/S.A, (Dimensions/specifications as per drawing no. CEE/E-711)
1643
32
52576
... More
G.I. Pin for I l KV Pin Insulators
Forged G. I. Pin conforming to IS 2486 part 1 & 2 as amended upto date suitable for 11 KV glazed porcelain pin insulators conforming to IS: 731/71 as amended upto date. G. I pin shall conform to reference S-165 N fig. 5 of IS: 2486/ (part-11)/74 as amended upto date.
Dimensions ‘X5 in said fig. shall be 150 mm (screwed 100 mm). Pin shall be supplied along with one suitable G. I, hexagonal nut and G. 1. spring washer. Minimum failing load of pin shall be 10 KN.
G. I. pins and nuts shall be hot dip galvanized as per lS: 2629/66 as amended up to date. The washers shall be electro galvanized. Acceptance tests and Routine tests shall be carried out at the manufacturers works and test reports shal! be furnished before supply of materials.
180
76
13680
... More
Supply of PVC wire 2C x 4sq.mm 1.1 KV Grade
1800
24
43200
... More
Fixing of HDGI stay clamps for RCC Pole 7.5 Mts L.A/S.A, (Dimensions/specifications as per drawing no. CEE/E-523)
559
69
38571
... More
crimping of Aluminium lugs, size 185 sq.mm as per technical specification
963
95
91485
... More
Removing of old exsiting HG fuse units
14
1684
23576
... More
Removing and re-hoisting of the existing Transformer of capacity 160KVA/ 200KVA
8
23457
187656
... More
Supply of HDGI stay clamps for RCC Pole 9.OO Mts L.A/S.A, (Dimensions/specifications as per drawing no. CEE/E-524) [Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas]
92
491
45172
... More
Supply of PVC wire 2C x 10sq.mm 1.1 KV Grade
1800
39
70200
... More
Fixing of HDGI stay clamps for RCC Pole 9.OO Mts L.A/S.A, (Dimensions/specifications as per drawing no. CEE/E-524)
92
79
7268
... More
HDGI 11 KV V-shape 'X' arm of channel ISMC 75 (75 x 40mm)
42
338
14196
... More
Erection of 11 KV Pin Insulators
11 KV brown glazed porcelain pin insulator with minimum failing load of 5 KN and the Minimum creepage distance of 320 mm conforming to IS 731-1971 as amended upto date.
Insulators shall be marked and packed as per IS.
Routine tests and acceptance tests as per IS shall be carried at the manufacturers works and test results shall be furnished before supply of materials.
180
76
13680
... More
Supply of L.T. Shackle insulators:
brown glazed shackle insulators of size 100mm x 115mm conforming to fig.No.4 and type 2 of IS: 1445/77 as amended upto date. Minimum failing load shall be 16kN.
Insulators shall have marking and packing as prescribed in IS. Acceptance tests and routine tests shall be carried out as per IS at manufacturers works and test results shall be furnished by the manufacturer before supply of materials.
Metal parts for L.T. Shackle insulatorsG. T hardware suitable for L. T. shackle insulators of size 100 x 115 mm. conforming to type 2, fig. 4 of IS: 1445/77 as amended upto date. Hardware or fitting shall confonn to fig. 4 of IS 7935-1975 as amended up to date, comprise of 2 G. 1. strips,
2904
372
1080288
... More
Removing of the existing Old deteriorated GNAT conductor as per technical specification.
208.9
4550
950495
... More
Removing of the existing main cable of sizes 3 ½ core 240sq.mm/185sq.mm/120sq.mm
644
136
87584
... More
Erection of Earthing complete with 40mm GI Pipe, 2.5 mts long alongwith 20 kgs each salt, charcoal complete.
363
2444
887172
... More
GNAT' conductor 7/2.21 mm nominal aluminium area 25mm2 (80 amps max. at 40° C)
288.9
9100
2628990
... More
Stringing of AA CONDUCTOR
Hard drawn stranded all aluminium conductor conforming to IS: 398(Pt-I/96) as amended upto date of following sizes.
Packing and marking of drum will be as per IS:
Materials shall be supplied on non-returnable wooden drums.
Acceptance tests and routine tests shall be carried out at manufacturers works and test reports shall be furnished before supply of materials.
The Department reserves right to witness all the above tests.
ANT' conductor 7/3.10 mm nominal aluminium area 50mm2 (190 amps max. at 40° C)
254.9
10300
2625470
... More
Supply of Earthing complete with 40mm GI Pipe, 2.5 mts long alongwith 20 kgs each salt, charcoal complete.
[Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas]
363
2730
990990
... More
Fixing of 11 KV H. G. fuse unit shall be as per enclosed drawing No. CEE/E-672 and CEE/E-641 and detailed specifications enclosed herewith Routine tests and acceptance for post insulators as per IS-2544-1973 as amended upto date and shall be carried out at the manufacturers works and test reports shall be furnished before supply of materials. Base channel of 75x40 mm (ISMC), I4DGI, Insulator 11KV: 3.4.1 The isolators shall be provided with 6 nos. of 24 kV post insulator per pole for 36 kV and 3 nos. of 24 kV post insulator per pole for 12 kV. There will be total of 18 such post insulators in one set of isolator for 36 kV and 9 such post insulators in one set of isolator for 12 kV. These insulators shall conform to latest amendment of IS: 2544 and IS: 5350 (Part-Ill). Aluminium connector with bi-metallic strip, Homs: Copper (tinted) of 7mm dia, Whisel of copper alloy, fly nut with bolt of brass for connecting fuse wire Earthing terminal with GI nut bolt and plain washer on base channel, Hom holder of copper alloy, Pad of copper alloy. The vertical operating rod shall comprise of 40 mm galvanized steel tube (medium class) as per IS: 1161. Length of the rod shall depend on the mounting position of the isolator. Operating handle shall be fixed to the concrete structures (approx. 1 meters above the ground level.). The vertical tube shall be galvanized as per IS: 4736 The entire unit should be supplied from one supplier/ of same make, assembled GOAB switch not to be accepted Galvanising of all the materials used should be hot dipped Galvanised as per IS:2629/66, (Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas)
H.G. Fuse unit 11 KV 200 Amps
14
3368
47152
... More
Supply of G.I. Pin for I l KV Pin Insulators
Forged G. I. Pin conforming to IS 2486 part 1 & 2 as amended upto date suitable for 11 KV glazed porcelain pin insulators conforming to IS: 731/71 as amended upto date. G. I pin shall conform to reference S-165 N fig. 5 of IS: 2486/ (part-11)/74 as amended upto date.
Dimensions ‘X5 in said fig. shall be 150 mm (screwed 100 mm). Pin shall be supplied along with one suitable G. I, hexagonal nut and G. 1. spring washer. Minimum failing load of pin shall be 10 KN.
G. I. pins and nuts shall be hot dip galvanized as per lS: 2629/66 as amended up to date. The washers shall be electro galvanized. Acceptance tests and Routine tests shall be carried out at the manufacturers works and test reports shal! be furnished before supply of materials.
180
239
43020
... More
RCC Poles 7.5 mtr long as per drawing CEE/C-837
499
5200
2594800
... More
Removing of 2 Pin cross arms assembly with Clamps, Nut & Bolt as per technical specification.
319
116
37004
... More
Removing and re-fixing of the existing service conenction three phase.
461
13
6223.5
... More
Supply of 11 KV Pin Insulators
11 KV brown glazed porcelain pin insulator with minimum failing load of 5 KN and the Minimum creepage distance of 320 mm conforming to IS 731-1971 as amended upto date.
Insulators shall be marked and packed as per IS.
Routine tests and acceptance tests as per IS shall be carried at the manufacturers works and test results shall be furnished before supply of materials.
180
454
81720
... More
Removing and re-fixing of the existing service conenction single phase.
1998
12
23976
... More
Erection
-
-
-
... More
Supply & crimping of Aluminium lugs, size 185 sq.mm as per technical specification
963
78
75114
... More
Supply of RCC Poles 11 mtr long as per drawing CEE/C-698
48
16371
785808
... More
Supply of RCC Poles 7.5 mtr long as per drawing CEE/C-837
499
6092
3039908
... More
Fixing of Break insulators 8KV(44KN): Guys strain insulators of sizes 90x65mm with minimum failing load of 44 KN and minimum creepage distance of 41mm. Conforming to fig1 and designation "A" of IS:5300/1969 as amended upto date. Insulators shall have marking and packing as prescribed in IS. Accepatance tests and routine tests shall be carried out as per IS and test results shall be furnished by the manufacturer before supply of materials.
679
97
65863
... More
Removing of LT shackle insulator
656
104
68224
... More
Fixing of Disc insulators ball and socket type, type ‘A’ porcelain brown glazed duly cemented at factory with MCI socket cap, forged steel ball pin and supplied with Phosphor bronze “W” split pin as per IS 731-1971 as amended upto date. Minimum failing load. Pin ball diameter 16 mm. Minimum Creepage distance 320 mm. Ferrous parts shall be galvanized as per relevant IS. Insulator shall be marked as per IS. Acceptance tests and routine tests shall be carried out as per IS by the manufacturer and test results shall be furnished by the manufacturer before supply of materials. 70 KN.
Disc insulators 70 KN 3-bolted type hardware fitting 70KN suitable for 11 KV ball and socket type disc insulators of 18mm pin, failing load of 70KN. Conform to IS-2486 Part 1-1993, 2486 Part 2-1989 as amended upto date.
96
375
36000
... More
Supply of GNAT' conductor 7/2.21 mm nominal aluminium area 25mm2 (80 amps max. at 40° C)
288.9
31000
8955900
... More
Fixing of HDGI Top fitting cross arm ISMC channel, ISMC 75 (75 x 40mm),
0.7mts long for 11KV, Cross arm not to be welded/joined at any place.
14
228
3192
... More
Supply of Enamelled danger board 440Volts/11000 Volts/ 3300 Volts: The plate should be made from mild steel at least 1.6mm thick and vitreous enamelled white with letters, figures and convectional skull and bones in signal red color on the front side. The rear side of the plate shall be enamelled. All lettering should be centrally spaced the corners of the plates should be rounded off size" 250mmx 200mm.( as per drawing no EE-II-3/2001,CEE/E/490).
28
248
6944
... More
Supply, transportation of G.O.A.B. Switch 11 KV (Single break) 12 KV rated voltage GOAB switches tilting type, outdoor, manually operated, triple pole, single break, conforming to IS: 9921-Parti to V as amended upto date and detailed specifications enclosed herewith. Each set shall comprise of six pedestal and three tilting post insulators. Insulator should be factory cemented by the manufactures of the insulators and have minimum 320mm creepage distance and AB switches contacts shall be of copper/copper alloy. The entire unit should be supplied from one supplier/ of same make, assembled GOAB switch not to be accepted Galvanising of all the materials used should be hot dipped Galvanised as per IS:2629/66, (Galvanising should be hot clipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas)The AB switch shall be of following current rating:
G.O.A.B. Switch 11 KV 200 Amps with operating pipe support of class B, 25mm dia., HDGI
19
23535
447165
... More
Removing and re-erection of 130 watts Led lights (existing fixtures)
39
1560
60840
... More
Removing of LT Pin Insulator
535
86
46277.5
... More
Stringing of ACSR CONDUCTOR
Hard drawn stranded aluminium conductor with galvanised steel wire reinforced conforming to TS: 398(Pt-Il/96) amended upto date of the following sizes.
Packing and marking of drum will be as per IS, Materials shall be supplied on non-returnable wooden drums. The type tests and acceptance tests and routine tests shall be carried out at manufacturers works and test reports shall be furnished before supply of materials. The Department reserves right to witness all the above tests.
ACSR conductor 'WEASEL' 6 +1 / 2.59 mm nominal aluminium area30mm2 (139 amps max. at 45° C)
4.5
11000
49500
... More
Fixing of HDGI X arm clamps for RCC Pole 11.00 mtr L.A/S.A, (Dimensions/specifications as per drawing no. CEE/E-711)
196
65
12740
... More
Removing of the existing 11.00m RCC pole
28
4900
137200
... More
Erection of Enamelled danger board 440Volts/11000 Volts/ 3300 Volts: The plate should be made from mild steel at least 1.6mm thick and vitreous enamelled white with letters, figures and convectional skull and bones in signal red color on the front side. The rear side of the plate shall be enamelled. All lettering should be centrally spaced the corners of the plates should be rounded off size" 250mmx 200mm.( as per drawing no EE-II-3/2001,CEE/E/490).
28
57
1596
... More
Erection of G.O.A.B. Switch 11 KV (Single break) 12 KV rated voltage GOAB switches tilting type, outdoor, manually operated, triple pole, single break, conforming to IS: 9921-Parti to V as amended upto date and detailed specifications enclosed herewith. Each set shall comprise of six pedestal and three tilting post insulators. Insulator should be factory cemented by the manufactures of the insulators and have minimum 320mm creepage distance and AB switches contacts shall be of copper/copper alloy. The entire unit should be supplied from one supplier/ of same make, assembled GOAB switch not to be accepted Galvanising of all the materials used should be hot dipped Galvanised as per IS:2629/66, (Galvanising should be hot clipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas)The AB switch shall be of following current rating:
G.O.A.B. Switch 11 KV 200 Amps with operating pipe support of class B, 25mm dia., HDGI
19
3971
75449
... More
Erection of PVC wire 2C x 4sq.mm 1.1 KV Grade
1800
8
14400
... More
Erection of single core, 185sq.mm, unarmoured Al conductor XLPE insulated 1.1KV grade power cable as per Technical Specification and as per IS:7098 (Part-I/1988) with latest ammendment carrying ISI mark.
3960
170
673200
... More
Removing of 4 Pin cross arms assembly with Clamps, Nut & Bolt as per technical specification.
336
130
43848
... More
Supply of Disc insulators ball and socket type, type ‘A’ porcelain brown glazed duly cemented at factory with MCI socket cap, forged steel ball pin and supplied with Phosphor bronze “W” split pin as per IS 731-1971 as amended upto date. Minimum failing load. Pin ball diameter 16 mm. Minimum Creepage distance 320 mm. Ferrous parts shall be galvanized as per relevant IS. Insulator shall be marked as per IS. Acceptance tests and routine tests shall be carried out as per IS by the manufacturer and test results shall be furnished by the manufacturer before supply of materials. 70 KN.
Disc insulators 70 KN 3-bolted type hardware fitting 70KN suitable for 11 KV ball and socket type disc insulators of 18mm pin, failing load of 70KN. Conform to IS-2486 Part 1-1993, 2486 Part 2-1989 as amended upto date.
96
2886
277056
... More
Supply of ACSR CONDUCTOR
Hard drawn stranded aluminium conductor with galvanised steel wire reinforced conforming to TS: 398(Pt-Il/96) amended upto date of the following sizes.
Packing and marking of drum will be as per IS, Materials shall be supplied on non-returnable wooden drums. The type tests and acceptance tests and routine tests shall be carried out at manufacturers works and test reports shall be furnished before supply of materials. The Department reserves right to witness all the above tests.
ACSR conductor 'WEASEL' 6 +1 / 2.59 mm nominal aluminium area 30mm2 (139 amps max. at 45° C)
4.5
40100
180450
... More
Removing of the existing 9.0 m RCC pole
42
2950
123900
... More
HDGI 4 pin 'X' arm ofISMC 75 (75 x 40mm) Channel 1.5 mtr length, Cross arm not to be welded/joined at any place, Galvanising should be hoi dipped (Dimensions/specifications as per drawing no: CEE/E/705).
1112
261
290232
... More
Supply of HDGI stay clamps for RCC Pole 7.5 Mts L.A/S.A, (Dimensions/specifications as per drawing no. CEE/E-523) [Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas]
559
311
173849
... More
Supply of HDGI 2 pin 'X' arm ofISMC 75 (75 x 40 mm) Channel 0.75 mtr length, Cross arm not to be welded/joined at any place, (Dimensions/specifications as per drawing no: CEE/E/704).
[Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas]
1263
569
718647
... More
Supply of RCC Poles 9 mtr long as per drawing CEE/C-836
94
8386
788284
... More
Fixing of Cut point 'X' arm of channel of ISMC 75 (75 x 40 mm) 1.3 Mtr long for 11KV, Cross arm not to be welded/joined at any place.
Guard 'X' arm of channel ISMC 75 (75 x 40 mm) 1.5 Mtr Long for 11KV, Cross arm not to be welded/joined at any place.
14
1038
14532
... More
Supply of 200 KVA 11KV/0.4KV Distribution Transformers level II losses, Alluminium Winding, with Bimetallic Terminal Connectors, Energy Efficiency Level-TT as per IS: 1180 (Part-1): 2014
7
377405
2641835
... More
HDGI 2 pin 'X' arm ofISMC 75 (75 x 40 mm) Channel 0.75 mtr length, Cross arm not to be welded/joined at any place, (Dimensions/specifications as per drawing no: CEE/E/704).
1263
232
293016
... More
Erection and commissioning of M. S. distribution box
As per drawing No.CEE/E-689 Revision No.3 alongwith 12 nos. of 200A Kitkat Porcelain fuse carrier and base with extended terminals conforming in general to drawing No.EE-II/7/2002 with 1 no. moulded case circuit breaker (MCCB), 415V, AC, 50Hz with extended terminals conforming to IS 13947-2 as amended upto date.
Distribution Boxes (M.S) with 200Amps MCCB & Kit-Kat fuses
19
4687
89053
... More
L.T. Shackle insulators:
brown glazed shackle insulators of size 100mm x 115mm conforming to fig.No.4 and type 2 of IS: 1445/77 as amended upto date. Minimum failing load shall be 16kN.
Insulators shall have marking and packing as prescribed in IS. Acceptance tests and routine tests shall be carried out as per IS at manufacturers works and test results shall be furnished by the manufacturer before supply of materials.
Metal parts for L.T. Shackle insulatorsG. T hardware suitable for L. T. shackle insulators of size 100 x 115 mm. conforming to type 2, fig. 4 of IS: 1445/77 as amended upto date. Hardware or fitting shall confonn to fig. 4 of IS 7935-1975 as amended up to date, comprise of 2 G. 1. strips,
2904
208
604032
... More
RCC Poles 11 mtr long as per drawing CEE/C-698
48
9800
470400
... More
Erection of PVC wire 2C x 10sq.mm 1.1 KV Grade
1800
11
19800
... More
Supply of HDGI Turn Buckle with eye bolt 11KV (as per drawing no.CEE/E-500) [Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas]
679
677
459683
... More
G.I Turn Buckle with eye bolt 11KV (as per drawing no.CEE/E-500)
679
267
181293
... More
Supply
-
-
-
... More
RCC Poles 9 mtr long as per drawing CEE/C-836
94
5900
554600
... More
G. I. bolts and 2 nuts with spring washers.All metal parts including nut bolts should be hot dip galvanized as per IS: 2629/66 as amended up to date. Spring washers shall be electro galvanized, (Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sq.mtr, 140 Microns DFT), suitable for high salinity coastal areas. Acceptance tests and routine tests shall be carried out as per IS and test results shall be furnished by the manufacturer before supply of materials.Department reserves the right to witness all the above tests.
1868
28
52304
... More
Fixing of HDGI BARBED WIRE FOR ANTICLIMBING DEVICE: Hot dip galvanized steel barbed wire type 4 conforming to IS:278/1962 as amended up to date and galvanization conforming to IS: 4826/1979 as amended up to date. ( Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000gms/sq.mtr, 140Microns DFT). suiatble for high salinity coastal areas, Nominal distance between the two barbs shall be 150mm. Tests as oer IS shall be carried out at the manufactures work & test reports shall be furnished before supply of materials.
28
46
1288
... More
Supply of HDG.I stay wire 7/10 SWG
The stay wire shall comply with the specific requirements of IS:2141-1979, IS:4826-1979 & IS:6594-1974 or the latest versions thereof. The wires shall be of tensile grade 4 & having minimun tensile strength of 700 N/mm2 conforming to IS:2141 HDGI stay wire standard of size 7/3.15mm(7/10SWG) wire should conform to ISS-2414/68 grade I and hot dipped galvanized as per IS 4826/1968 with up to date amendments (Galvanizing should be hot dipped Galvanised as per IS:2629/66, minimum Zinc coating of 1000 gms/sqmtr,140 microns DFT), suitable for high salinity coastal areas.
4989
141
703449
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements