ZAMBOANGA SIBUGAY POLYTECHNIC INSTITUTE Tender

Description Invitation For Submission Of Quotation (small Value Procurement) Computer-controlled, High-speed Lock Stitch, Button Sewing Machine (with Button Feeder) 1 Unit Specification: (with Technology Transfer) Max. Sewing Speed: 2700sti/min* Button Size: Type : Round-shaped, Flat Button (2-holed, 4-holed) Size : Φ9~20mm For Small Button: Φ10~φ15mm For Medium-sized Button: Φ12~φ18mm (those That Are Smaller Than Φ10mm Or Larger Than Φ18mm Must Be Specially Ordered.) Thickness: 1.8~3.5mm Stitch Length : 0.1~10mm (0.1mm Step) Needle Bar Stroke : 45.7mm Lift Of The Work Clamp Foot : Max. 11mm Auto-lifter: Provided As Standard (stepping Motor Type) Needle Thread Tension : Active Tension (electronic Thread Tension Control System) Needle (at The Time Of Delivery) : Dp×17 (#14) Hook : Standard Shuttle Hook Number Of Stitches That : Max. 20,000 Stitches Can Be Stored In Memory Number Of Standard Patterns : 50 Patterns Number Of Data That Can Be Input: 200 Patterns 20~200%(1% Step), Pattern Enlargement /reduction Can Be Done By Increasing /decreasing The Stitch Length Enlarging/reducing Facility Memory Medium: Internal-organs Memory Bobbin Thread Counter: Provided As Standard (up/down Method) Bird's Nest Preventing / Shorter-thread Remaining Functions Supplying And Sorting Of Button: Vibration System Button Feed: Horizontal Forced Button-feed Mechanism Button Feed Mode: Automatic Feed Mode, Non-feed Mode, And Small-lot Sewing Mode Lubrication:hook: Minute-quantity Lubrication Lubricating Oil: Juki New Defrix Oil No.2 (equivalent To Iso Vg32) Sewing Machine Motor: Compact Ac Servomotor (direct-drive System) Power Consumption: 320 Va Weight: 131kg (include Machine Head, Table And Br35) Computer Controlled, High Speed, Buttonholing Machine (computerized, Direct Drive, Automatic Buttonhole Machine (with Technology Transfer) 1 Unit Max. Sewing Speed - 4200 Sti/min Memory Capacity- 31 Standard Patterns Included, As Many As 99 Can Be Input Max Buttonhole Length- 41mm Lift Of The Work Clamp Foot- 14mm (17mm When The Reverse-rotation Needle-up Function Is Used) Needle System-134r Needle Plate For High Speed Set (plate, Foot, Feed Dog, Screws & Slide Plate) 4 Lines Heavy Big Foot 10 Set Needle Clamp Screw 10 Set Thread Clipper 25 Pcs The Zamboanga Sibugay Polytechnic Institute (zspi) Formerly Kabasalan Institute Of Technology (kit), Through The General Appropriations Act (gaa) Of 2018 Intends To Apply The Sum Eight Hundred Ninety-four Thousand Nine Hundred Twenty-five Pesos Only (php 894,925.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Procurement Of Compliance Audit Findings In Tailoring Nc Ii -assessment Center Use. Price Quotation Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Procurement Will Be Conducted In Consonance With Section 53.9 Negotiated Procurement (small Value Procurement) Of The 2016 Revised Implementing Rule And Regulations(irr) Of Republic Act 9184 (r.a. 9184), Otherwise Known As The “government Procurement Reform Act”. Only Sealed Bids/quotations From Eligible Bidders Will Be Opened And A Contract Will Only Be Awarded To The Lowest Calculated Responsive Quotation. Price Quotation Must Be Delivered To The Address Below On Or Before July 22, 2024; 12:00 Noon. Opening Of Price Quotation Shall Be On July 22, 2024; 2:00 P.m. At Zspi Fbs Room. Late Price Quotation Shall Not Be Accepted. The Zamboanga Sibugay Polytechnic Institute (zspi) Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Analyn J. Ellorin Chairperson Bids And Awards Committee Other Information Items Listed In Request For Price Quotation Form Shall Be Awarded On Approved Budget For The Contract Basis.