World Health Organisation Tender

Refurbishment & Alteration To Existing Fcdc Laboratory & The Purpose Of This Request For Proposals (rfp) Is To Enter Into A Contractual Agreement With A Successful Bidder And Select A Suitable Contractor To Complete The Refurbishment And Alteration To Existing Fiji Centre For Disease Control (fcdc) Food And Water Laboratory. Background The Korea International Cooperation Agency (koica) Provided Financial Support On Fiji’s Response To Climate Change Through The Strengthening Health Adaptation Project (shape) Which Is Managed By The World Health Organization. Under Outcome 2 Of The Shape Project – Strengthened Communicable Disease Surveillance System, One Of The Activities   Is To Support The Renovation Of Fiji Cdc’s Public Health Laboratory Conduct Essential Testing And Monitoring For Essential Environmental Health Risks Such As Food And Water Safety And Provide Appropriate Laboratory Technologies To Enhance Confirmatory Diagnosis On Priority Climate-sensitive Diseases Such As Leptospirosis. The Ministry Of Public Works Meteorological Service And Transport (mpwmst) Built The Original In 1965 And Carried Out Regular Maintenance And Renovations Of Works Every 5 Years Since Then Until The Fiji Public Works Department’s (building Maintenance Unit Of Mpwmst) Closed In 2008. The Fiji Cdc Water Laboratory Conducts Testing For Water Samples Referred From Various Health Offices In Fiji While Testing For Food Samples Are Referred To University Of The Pacific Laboratory And Koronivia Research Laboratory At High Costs. The Who Dps, Phs And Pce Teams Have Committed To Advancing This Progress And Have Proven Their Strong Adherence With Achieving Universal Health Coverage (uhc), Health-related Sdgs As Climate Resilience Requiring Multidisciplinary Approaches Not Only In The Health Sector But Also Communities And Society. With A Primary Focus On Climate Resilience, The Team Is To Support Fiji Mohms In Strengthening Its Leadership And Coordination In Climate Change And Health Policy, Enhancing Laboratory Capacity And Surveillance Network, And Community Engagement For Climate Resilience. The Contractor Will Be Responsible For Assisting The Mohms In The Implementation Of The Shape Work Plan Output 2, Activity 2.2.4: Renovation Of Fiji Cdc Food And Water Laboratory. Requirements/work To Be Performed Output 1: Preliminary And General. Deliverable 1.1: Allow For All Preliminary & General Costs, Inspection, Supervision, Compliance, And Certification Not Otherwise Provided For In This Schedule. Deliverable 1.2: Install All Sheds And/or Offices For The Use Of Contractor’s Representative, All Subcontractors, Storage Of Materials, Fitted Out As Required And Mobilization Of Constructional Equipment And Plant On The Site In Accordance With The Workmen, And The Like, And For The Contract Documents.   Deliverable 1.3: Place Project Signboard. Deliverable 1.4: Reinstatement Of Affected Areas, Removal Of Temporary Works And Facilities, Cleaning Of The Site And Demobilization. Output 2: Demolition And Roofing Deliverable 2.1: Allow To Carry Out All Demolition Works Listed In The Scope Of Work And Make Good Existing Surface Area. Deliverable 2.2: Allow To Cart Away All Demolition Debris From Site, And Dump At A Suitable Location Approved By The Architect/client. Deliverable 2.3: Remove And Replace Existing Barge/fascia Board, And Allow Painting The Same To Match Existing. Deliverable 2.4: Remove And Replace New Roofing Sheets Complete With Flashings, Ridge Cap, Sisalations, Fixings, Etc., As Per Specifications. Deliverable 2.5: Remove And Replace New Gutter And Downpipe Complete With All Required Fittings And Fixing As Per Specifications. Output 3: Exterior Wall And Interior Wall Finishes. Deliverable 3.1: Allow To Scrape Off Existing Peeling Paint, Make Good Surface Area, And Clean Exterior Wall. Deliverable 3.2: Allow To Paint Exterior Walls. (3 Coats).  output 4: Windows & Doors Deliverable 4.1: Supply And Install Aluminium Framed Fixed Glassed Windows. Deliverable 4.2: Supply And Install Aluminium Framed Doors. Deliverable 4.3: Supply And Install Kk1 Series Key In Knob. Deliverable 4.4: Supply And Install Kl3 Series Key In Lever. Deliverable 4.5: Supply And Install Standard Button Tipped Hinge. Deliverable 4.6: Supply And Install Lockwood Electromechanical Door Closer. Deliverable 4.7: Supply And Install 250 Door Stopper (a250sc). Deliverable 4.8: Supply And Install D5 (refer To Drawing For Specs). Deliverable 4.9: Allow To Paint D5 And D5 Timber Frames. Output 5: Floor And Internal Wall Finishes Deliverable 5.1: Allow To Lay Non-slip Quarry Tiles Approved By The Architect/client To Wet/highlighted Floor Area. Deliverable 5.2: Allow To Lay Specified Vinyl Sheet, Approved By The Architect/client To All Room's Floor Except Toilet/bathroom And Change Room. Deliverable 5.3: Allow To Scrape Off Existing Peeling Paint, Make Good Surface Area, And Clean All Surfaces Of Internal Walls. Deliverable 5.4: Allow Painting To Internal Walls. (3 Coats). Deliverable 5.5: Allow To Lay Wall Ceramic Tiles Approved By The Architect/client To Wet/highlighted Area. Output 6: Ceiling Finishes Deliverable 6.1: Remove And Replace Existing Ceiling Lining With 12mm Fyreline Gib Board Complete With Cornices And Fixings As Per Specifications. Deliverable 6.2: Allow Painting To Ceiling And Cornice. (3 Coats). Output 7: Fittings And Fixes Deliverable 7.1: Allow To Supply And Install 6030mm X 600mm X 900 High 'u Shaped' Granite Top Worktop Completes With Finishing’s Approved By The Architect/client. Deliverable 7.2: Allow To Supply And Install 6600mm X 600mm X 900 High Granite Top Worktop Complete With Finishing’s Approved By The Architect/client. Deliverable 7.3: Allow To Supply And Install 8550mm X 600mm X 900 High 'l Shaped' Granite Top Worktop Completes With Finishing’s Approved By The Architect/client. Deliverable 7.4: Allow To Supply And Install 2575mm X 600mm X 900 High Granite Top Sink Bench Complete With Finishing’s Approved By The Architect/client And 2 Row Of 150mm X 150mm Tile Splash Back. Deliverable 7.5: Allow To Supply And Install 1700mm X 500mm X 700 High Timber Benches Complete With Finishing’s Approved By The Architect/client. Deliverable 7.6: Allow To Supply And Install 900mm X 300mm Wide Counter Top Complete With Finishing’s Approved By The Architect/client. Output 8: Sanitary, Tea Room And Shower Deliverable 8.1: Allow To Supply And Install All Sanitary Plumbing Fittings/items Listed Below Under Their Respective Locations/room. Deliverable 8.2: Single Bowl Ss. Sink (britex). Deliverable 8.3: Swivel Spout With Elbow Tap. Deliverable 8.4: Adjustable Height Shower Set (britex) 600 X 600 Low Profile Upstand Shower Tray (britex). Deliverable 8.5: Bright Chrome Plate 150mm Accessible shower Lever (britex). Output 9: Main Laboratory And Laboratory Office Deliverable 9.1: Adjustable Height Shower Set (britex). Deliverable 9.2: 900 X 900 Low Profile Up Stand Shower Tray (britex). Deliverable 9.3: Bright Chrome Plate 150mm Accessible Shower Lever (britex). Deliverable 9.4: Swivel Spout With Elbow Tap. Deliverable 9.5: Single Bowl Ss. Sink (britex). Deliverable 9.6: Laboratory Ss. Sink (britex). Deliverable 9.7: Highly Polish Finished Round Basin (britex). Deliverable 9.8: Swivel Spout With Elbow Tap. Output 10: Fire Services Mechanical And Electrical Services Deliverable 10.1: Allow To Supply And Install 4.5kg Fire Extinguisher Complete With Fixings Etc. Deliverable 10.2: Allow To Supply And Install wall Mounted Air Conditioning Unit (9000btu) Complete With Fixtures, Approved By The Architect/client. Deliverable 10.3: Allow To Make Good Wall Surface Area Of Ditto Locations To Match Existing. Deliverable 10.4: Allow To Supply And Install All Electrical Wires And Fittings Listed In The Deliverable 10.5: Electrical Legend, Sheet A04 Of The Construction Drawing Complete With Fixtures, Approved By The Architect/registered Electrician/client. Output 11: Submitted Finalized Report. Deliverable 11.1: Finalized Report Including Building Certification, Engineers’ Certificate, And Cyclone Certified To Be Provided. Characteristics Of Contractor Mandatory: Proven Experience In The Field Of Civil Works Building And Enginnering. Previous Work With Who, Other International Organizations And/or Major Institutions In The Field Of  Climate Change, Environmental Sciences, Disaster Risk Reduction, And Civil Works Renovation On Public Hospitals,  Nursing Stations, Laboratories And Other Government Properties; Desirable: Experience In Civil Works Involving Laboratory Facilities. Submissions Qualified And Interested Specialists Should Submit The Following Documents To The Supply Officer Through Wp Ro Ungm At < Wproungm@who.int > By 21 July 2023 • Company Profile {for Institutional Applications} • Technical Proposal Indicating Methodology And Timelines, In Addition To The Below Annexes Annex 1: Acknowledgement Form Annex 2: Confidentiality Undertaking Annex 3: Proposal Completeness Form Annex 6: Self-declaration Form • Financial Proposal Please Use Tender Notice No. 206001 as Subject To All Submission. Only Successful Candidates Will Be Contacted. Last Day Of Receiving Queries For This Tender Is On 14 July 2023