Wood Tenders

Description: Procurement Of Wooden Saw Dust Etc.

Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through Special Education Fund 2024/sb No. 1, Intends To Apply The Sum Of P 4,830,896.91 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Als Classroom Bjmp, Bjmp Compound, Brgy. Tipanoy, Iligan City With Project No. Cb(b)- 25-012 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars : Construction Of Als Classroom Bimp, Bjmp Compound, Brgy. Tipanoy, Iligan City Scope Of Work: General Requirements "includes Processing Of Permits & Clearances: "installation Of Project Billboard, 2 Sets "occupational Safety & Health Program "mobilization/demobilization Earthworks "excavation For Foundation, Tie Beam, Septic Vault, Stairs Foundation, & Catch Basin; "embankment From Excavation & Compaction; "gravel Bedding For Foundation, Catch Basin, Septic Vault, Tie Beam, Stairs Foundation & Slab On Grade: Concrete Works, Forms & Scaffoldings "concrete Pouring For Foundation, Tie Beam, Septic Vault (flooring Top & Bottom), Suspended Slab & 2nd Floor Beams, Roof Beam At Gridline A-b-1-4 Only And Provision Of Steel Reinforcement Must Include, Catch Basin (flooring Top & Bottom) Stairs, & Slab On Grade, & Installation Of 1.0mm Thk. Steel Deck, "formworks, & Scaffoldings, Masonry Works "installation Of 4" X 8" X 16" Concrete Hollow Blocks (chb) For All Wallings (male Room Only), Catch Basin (male Side Only), & Septic Vault Including Steel Reinforcement W/plaster Finish, & Smooth On Expose Areas, Electrical Works "installation Of Electrical Wirings & Connections W/complete Accessories & Fixtures At Male Room Only, Paint Works & Finishes "skim Coating & Painting Works For 2nd Floor Wallings At Male Room Only And Ground Floor Wall At Gridline B & Concrete Columns Gridline A & B; "includes Also The Ceilling Paint & Rubberized Floor Coating At 2nd Floor Male Room Only. • Steel Works "installation Of 2" X 4" X 1.50mm Thk. C-purlins W/10mm@ Sagrods "fabrication & Installation Of Steel Half Turss & Steel Fascia Frame (50mm X 50mm X 6mm Thk., 38mm X 38mm X 4.5mm Thk., 1" X 1" X 3/16" Thk. Angle Bar & 1" X 3/16" Thk. Flat Bar): "all Steel Rafter, Fascia Frame, & C-purins Must Be Coat Twice Af Epoxy Primer, "installation Also Of 6mm Thk. Base Plate And Must Be Full Weld On Steel Half Truss At The Top Of The Column With 4-12mm Anchor Bolt W/nut & Washer To Be Full Weld On Vertical Bars Of Columns Or Horizontal Bars Of Roof Beam: "installation Of 1-1/2"8 And 10 X 6m. Stainless Steel Pipe Grade-304 For Stain At Male Room Only. Tinsmithry Works "installation Of 0.40mm Thk. Long-span Colored Roof Rib Type, 0.40mm Thk. Pre-fab Fascia Cover, & 0.40mm Thk End-wall Flashing /wcomplete Accessories Ceiling Works "installation Of 4' X 8' X 4.5mm Thk. Fiber Cement Board (fcb) Including 19mm X 50mm X 0.5mm Thk. Double Furring W/complete Accessories: Tile Works "installation Of 300mm X 300mm Non-skid Ceramic Floor Tiles, 300mm X 600mm Ceramic Wall Tiles Wipvc Tile Trim, "installation Of 200mm X 1200mm & 300mm X 1200mm Ceramic Tiles W/2cm X 4cm X 8ft Stair Nosing. Doors & Windows "installation Of Sliding Glass Window, Fixed Glass Window & Awning Glass Window On Aluminum Frame W/complete Accessories At Male Room Only: "installation Of Double Glass Swing Door W/fixed Glass Transom, Pre-fab Wooden Panel Door & Flush Door W/complete Accessories At Male Room Only, Plumbing Works "installation Of Pvc Pipes, Fittings & G.i Pipes; "installation Of Plumbing Fixtures Such As, Water Closet, Stainless Floor Drain, Stainless Faucet, & Lavatory. "installation Of Water Meter, Gate Valve, Check Valve, & Water Pump, Steel Reinforcements "using 10mm, 12mm, 16mm & 20mm X 6m Deformed Steel Bars Wil#16 G.i Tie Wire. "includes The Installation Of Provision Of Steel Reinforcement For Tie Beam, 2nd Floor Beams, Suspended Slab & Roof Beams: Demolition & Removal Works "removal Of An Existing Concrete & Steel Structures Note: "provide Adequate Construction Safety Signage And Biliboards; Clearing; Cleaning & Disposal Of Construction Debris Materials At The Project Site: Proper Turn-over I. Permits & Clearances (q= 1.00 Lumpsum), Includes Fire, Brgy. Clearance For Construction Fee, Professional Fee, White Print (a-3)-6 Sets Of Plans. Ii. Construction Safety & Health Program (0) = 1.00 1.5.) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. Iii. Project Billboard (q= 2.00 Set/s) Iv. Mobilization & Demobilization (q= 1.00 Lot) V. Demolition & Removal Works (0) = 1.00 Lot) Includes 4' X 8' Tarpaulin Print Billboard, B' X 8' Tarpaulin Print Billboard, 2" X 3" X 14' Coco Lumber, 2" X 3" X 10' Coco Lumber, 2" X 2" X 8' Coco Lumber, Assorted Sizes C.w. Nalls. Includes Demolition Of An Existing Concrete & Steel Structures. Vi. Earthworks (q = 134.20 Cu.m.) Includes Volume To Be Excavated, Volume To Be Backfilled, Gravel Bedding. Vii. Concrete Works, Formworks And Scaffoldings (q = 61.83 Cu.m.) Includes Portland Cement; Washed Sand; Washed Gravel; Web Type Steel Deck, Im Wide X 1.0mm Thk.; 4' X 8' X 1/2" Thk. Ordinary Plywood; 2" X 3" X 10' Coco Lumber; Assorted Sizes C.w Nails. Viii. Masonry Works (q = 286.84 Sq.m.) Includes 4" X 8" X 16" Chb, Portland Cement, Washed Sand, 10mm Dia. X 6m Dsb, #16 G.i Tie Wire. Ix. Steel Reinforcements (q= 13,689.66 Kg/s) Includes 10mm Dia. X 6m Dsb, 12mm Dia. X 6m Dsb, 16mm Dia. X 6m Dsb, 20mm Dia. X 6m Dsb, #16 G.i Tie Wire. X. Tinsmithry (q125.40 Sq.m.) Includes 0.4mm Thk. Colored Roof Long Span Rib Type; Pre-fab Colored Fascia Cover, 0.4mm Thk. X 8"; Pre-fab Colored Wall-end Flashing, 0.4mm Thk. X 8'; Blind Rivets, (1000pcs/box); Teksrew; Riveter; Aviation Metal Snip Scissor. Xi . Steel Works (0 = 2030.9kq / S) Includes 50mm Thk. Angle Bar- 24pcs; 38mm X 38mm X 6m X 4.50mm Thk. Angle Bar-32pcs; 25mm X 25mm X 6m X 3/16" Thk. Angle Bar- 18pcs; 25mm X 6m X 3/16" Thk. Flat Bar- Bpcs, 2" X 4" X 6m X 1.5mm Thk. C-purlins- 36pcs; Sagrods-10mm X 6mm Dsb-14pcs, Welding Rod, 6011; 4' X 8' X 6mm Thk. Mild Steel Plate; M120 Achor-bolt, W/nut & Washer, 1-1/2" X 6m X 1.2mm Thk. Stainless Steel Pipe- Grade 304; 1°0 X 6m X 1.2mm Thk. Stainless Steel Pipe- Grade 304; Stainless Welding Rod; Epoxy Primer; 4" Paint Brush; 4"ø Cutting Disc; 4"ø Grinding Disc. Xii. Ceiling Works (q = 80.62 Sq.m.) Includes 4' X 8' X 4.5mm Thk. Fcb, 19mm X 50mm X 5m X 0.5mm Thk. Double Furring, W-clip, Blind Rivets (1000pcs/box), 1" X 3mm Screw, Concrete Nails, Riveter, Aviation Metal Snip Scissor. Xiii . Tile Works (q= 29.77 Sq.m.) Includes 300mm X 600mm Ceramic Wall Tiles, A = 10.05 Sq.m, 300mm X 300mm Non-skid Ceramic Floor Tiles, A = 2.58 Sq.m; 200mm X 1200mm Ceramic Tiles, A = 8.64 Sq.m; 300mm X 1200mm Ceramic Tiles, A = 8.50 Sq.m; 2cm X 4cm X 8ft Stair Nosingpvc Tile Trim, 6mm X 2.40m; Portland Cement; Washed Sand; Tile Adhesive, Heavy Duty; Tile Grout; Tile Cutter Disc. Xiv. Paint Works & Finishes (q= 611.65 Sq.m.) Includes Skim Coat, A = (465.47 Sq.m); Neutralizer; Flat Latex Primer; Masonry Putty; Top Coat, 1st & 2nd Coat; Flat Wall White, Top Coat (for Ceiling Paint, A = 80.62 Sq.m); Boral; Acreex Floor Coating, (a = 65.56 Sq.m); Acreex Reducer; Baby Roller #4 Mini; Tray Paint; Paint Brush, 2"; Paint Brush, 4"; Sand Paper. Xv. Doors & Windows (q = 10set / S) Includes D1: 1-panel, 900mm Pre-fab Wooden Panel Door W/complete Acccessories, (2" X 6" Door Jamb, Kiln Dried, 4 Sets Steel Hinges & Heavy Duty Door Knob); D2: 700mm X 2100mm Pre-fab Flush Door W/ Louver W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 4 Sets Of Steel Hinges & Heavy Duty Lever Type Door Knob); D3: 7-panels, 2500mm X 3000mm Double Sliding Glass Door W/ Fixed Glass W/complete Accessories On Aluminum Frame; W1: 3000mm X 1200mm 4-panels, Sliding W/ Fixed Glass Window W/complete Accessories On Aluminum Frame; W3: 1550mm X 1200mm Sliding W/fixed Glass Window W/complete Accessories On Aluminum Frame; W4: (4-panels), 600mm X 2250mm Awning Glass Window W/fixed Glass, W/6mm Thk. Bronze Glass On 50mm X 100mm Analok Frame W/complete Accessories (6pcs Of Steel Hinge & 3pcs Of Cam Handle Lock; W5: 600mm X 600mm Awning Glass Window W/complete Accessories On Aluminum Frame (2pcs Stainless Hinges & Heavy Duty Cam Handle Lock). Xvi. Plumbing Works (q = 1lot) Includes 4" Dia. X 10' Pipe S-1000; 4" Dia. Pvc Sanitary Wye, S-1000; 4" Dia. Pvc Sanitary Tee, S-1000; 4" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 4" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); 4" Dia. Pvc Clean Out W/adapter & Plug; 4" X 2" Dia. Pvc Sanitary Wye; 4" X 2" Dia. Pvc Sanitary Tee; 2" Dia. X 10° Pvc Pipe S-1000; 2" Dia. Pvc P-trap; 2" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 2" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); Pvc Cement, 400cc; 1" Dia. X 20' G.i Threaded Pipe Water Supply Line; 1" Diam. G.i Threaded Pipe Elbow, 90deg.; 1" Diam. G.i Threaded Pipe Tee; 1" Diam. G.i Coupling; 1 Hp Motor Pump, Heavy Duty; Water Meter-heavy Duty; Gate Valve-heavy Duty; Check Valve-heavy Duty; G.i Basket Strainer; 4" X 4" Stainless Floor Drain; Water Closet W/complete Fttings/accessories-heavy Duty; Lavatory-heavy Duty: Stainless Wall Faucet-heavy Duty; Stainless Faucet W/flexible Hose-heavy Duty; Teflon Tape, 3/4" X 10m. Xvii. Electrical Works (q = 1.00 Lot) Includes Electric Wire,3.5mm² Thhn Stranded Copper Wire; Electric Wire, 8.0mm² Thhn Stranded Copper Wire; Electric Wire, 14.0mm² Thhn Stranded Copper Wire; Electric Wire, 30.0mm² Thhn Stranded Copper Wire; Electric Wire, 38.0mm² Thhn Stranded Copper Wire; Switch, 16a, Spst,w/plate, 3-gang; Switch, 16a, Spst,w/plate,2-gang; Switch, 16a, Spst, W/plate,1-gang; T8 Led Tube 20w With Batten Fixture 4ft; Ceiling Lighting Receptade; Led Bulb 9watts; Duplex Convenience Outlet; Weatherproof Cover For Switch & Outlets, 2-gang, Wpp-603; Upvc Flexible Pipe, 1/2"x25m; Upvc Conduit Pipe, 1/2"x3m; Pvc Conduit Coupling (15mm)dia.; Pvc Conduit Elbow 90deg. (15mm)dia.; Junction Box, Pvc Octagonal W/ Cover 4"x4" Depth Type; Utility Box 2"x4" Depth Type; Pvc Conduit Pipe, 25mm X3 Meters; Pvc Conduit Coupling (25mm)dia.; Pvc Conduit Elbow 90deg. (25mm)dia.; Pvc Conduit Pipe, 40mm X3 Meters (40mm) Dia.; Pvc Conduit Elbow 90deg. (40mm)dia.; Service Entrance Cap 40mm; Electrical Tape 3/4" X20yds; Circuit Breaker 15at 2pole, Plug In Type, 230v; Circuit Breaker 20at 2pole, Plug In Type, 230v; Circuit Breaker 60at 2pole, Plug In Type, 230v; Circuit Breaker 100at 2pole, Plug In Type, 230v; Mccb 2pole 125at, 50kaic, 230vac W/ Enclosure; Panel Box, 6 Holes, 100af, 2p Plug-in Tql Cb,30x29x8.5 Cm; Panel Box, 8 Holes, 100af, 2p Plug-in Tql Cb,35x29x8.5 Cm; Secondary Rack W/ 2 Spool Insulator; Grounding Rod 1meter X 5/8 With Grounding Clamp 5/8 (copper Plated). Note: For Further Details Please See Attached Plan And Specifications. Approved Budget For The Contract (abc) : P 4,830,896.91 Required Bid Security : 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Seventy-two (172) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Year From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1. Issuance Of Bid Documents : February 25 – March 18, 2025 8:00 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Palao, Iligan City 2. Pre-bid Conference : March 4, 2025 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Palao, Iligan City 3. Submission Of Bids : March 18, 2025 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4. Opening Of Bids : March 18, 2025 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed) Darwin J. Manubag,ph.d. Bac Chairman Date Of Advertisement/posting: February 25, 2025 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 25-012 (infra)

Details: Description The Bids And Awards Committee (bac) Of The Lgu-lubang, Occidental Mindoro Invites Contractors To Bid For The Aforementioned Project: Contract I.d.: Ml-2025-02-16 Contract Name: Municipal Counterpart For The Construction Of Tangal Barangay Health Station Contract Location: Brgy. Tangal, Lubang, Occidental Mindoro Specification: Project Billboard / Signboard, Occupational Safety And Health Program, Mobilization / Demobilization, Clearing And Grubbing, Excavation, Embankment/fill, Reinforcing Steel Bars/ Steel Works, Concrete Works, Chb Wall, Wall Finish: Plastering, Dry Wall, Roofing System(sagrods), Painting Works(masonry Painting), Wooden Painting, Steel Painting, Tile Works, Cold Waterline System, Sewerline, Painting Works(wood Works), Installation Of Main Distribution Panel, Panel Boards And Enclosed Circuit Breakers, Installation Of Roughing Ins, Pipes, Conduits And Fittings, Wires And Cables, Lighting Fixtures, Power Outlet And Electrical Devices Approved Budget Of The Contract: Php 750,000.00 Delivery Period: 60 Cd Source Of Funds1: 2025 - 20% Development Fund Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Municipality Of Lubang Now Invites Bids For Municipal Counterpart For The Construction Of Tangal Barangay Health Station.2 The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Of The Instruction To Bidders. The Significant Times And Deadlines Of Procurement Activities Are Shown Below: Issuance Of Bidding Documents February 25 - March 4, 2025 Pre-bid Conference N/a Submission And Receipt Of Bids March 4, 2025, 12:00 Pm Place And Time For Opening Of Bids March 4, 2025, 2:00 Pm @ Municipal Conference Hall Interested Bidders May Obtain Further Information From Municipality Of Lubang And Purchased The Bidding Documents At The Address Given Below. The Pre-bid Conference Is Open To All Interested Parties. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Acceptable For The Contract. The Municipality Of Lubang Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.

Details: Description Request For Quotation (rfq) Supply And Delivery Of Construction Materials To Be Use In Repair Of Equipment And Maintenance Office Sir/madam: Please Quote Your Price For The Article Described Below With The Request That The Condition Or Requirement To Be Complied With An Approved Budget For The Contract (abc) In The Amount Of Php 258,498.36, You Are Hereby Invited To Submit Your Open Price Quotation On Or Before 10:00 A.m., February 28, 2025, Failure To Submit Means Disqualification. Purpose: Procurement Of Supply And Deliver Of Construction Materials To Be Use In Repair Of Equipment And Maintenance Office Item Qty. Uom Description 1 1.00 Set First Aid Medicine Kit 2 11.00 Each Safety Vest 3 11.00 Pair Working Gloves 4 11.00 Pair Rubber Boots 5 11.00 Each Construction Safety Helmet( Hard Hat ) 6 25.00 Bd.ft Good Lumber (2"x2"x10ft) 7 25.00 Bd.ft Good Lumber (2"x3"x10ft) 8 45.00 Bd.ft Good Lumber (2"x4"x10ft) 9 5.00 Kg Assorted Nails 10 54.00 Pc 6 Mm Fiber Cement Board 4x8 11 169.50 Pc Metal Furring 12 53.40 Pc Carrying Channels 13 150.00 Pc Hanger Bars/ Rod 14 900.00 Pc Channel Clip 15 35.70 Pc Wall Angle 16 2,100.00 Pc Rivets 17 600.00 Pc 1" Metal Screw 18 8.00 Pc Pu Stone Panel 19 6.00 Pc High Pressured Laminates 20 25.00 Pc Wpc Flutted Wall Panel 21 15.00 Pc Marine Plywood ( 4'x8'3/4" Thk ) 22 5.00 Pack Black Screw 23 2.00 Gal Wood Glue 24 15.71 Sq.m Glazed Tiles 25 5.09 Bags Cement 26 0.51 Cu.m Sand 27 2.38 Bags Tile Adhesive (25 Kg) 28 2.65 Bags Tile Grout 29 5.08 Gal Primer 30 2.60 Gal Patching Compound 31 4.16 Gal Semi Gloss Latex ( Two Coat Only) 32 1.00 Box 3.5 Mm2 Electric Wire (twithhnitwhn2) 33 1.00 Set Panel Board ( 6 Branch ) 34 10.00 Pc 60at Breaker 35 3.00 Pc 20at Breaker 36 10.00 Pc Electrical Tape 37 15.00 Pc 2 Gang Outlet 38 5.00 Pc 2 Gang Floor Outlet 39 12.00 Set 9w Of Pinlights 40 1.00 Roll 10m Led Strips ***nothing As Follows*** 1 To Specify The Brand Or Trademark And Other Pertinent Date Of Your Product Articles. 2 To Quote The Price Of The Articles Verified And Found Of Your Store. 3 To Deliver The Articles To The Mpw-barmm Ccdeo, Cotabato City Within Ten (10) Calendar Days From The Receipt Of The Purchase Order/contract Agreement. 4 To Submit The Price Quotation Form (pqf) Annex A, At On Or Before 10:00 A.m., February 28, 2025 5 To Accept The Flag Law And Other Laws (foreign Only). 6 To Participate As Bonafide Dealer. 7 This Business Is Duly Licensed And Permitted By The Government. 8 To Submit Your Certificate Of Exclusive Distributorship.

Details: Description 30 Pcs Monobloc Chair, White ₱500.00 ₱15,000.00 8 Pcs Training Table ₱4,500.00 ₱36,000.00 Wooden Folding Table With Metal Frame L180 X W60 X 75 Cm 90 Pcs Vinyl Tile Size: 45x45 ₱150.00 ₱13,500.00 Thickness: 2mm Color: White, Cream Or Light Gray 3 Gallon Rugby ₱950.00 ₱2,850.00 Delivery Period: 15 Days Mode Of Payment: Cheque Total ₱67,350.00

Details: Description Materials Painting Works Total Amount 68,318.35 (falseworks) Particulars Qty Unit Unit Cost Total Amount A.coco Lumber 180 Bd.ft 30.00 5,400.00 B.assorted Common Wire Nails 5 Kg 85.00 425.00 C.consumable (5% Materials Cost) 291.25 Total Cost 6,116.25 (masonry Painting) Particulars Qty Unit Unit Cost Total Amount A. Concrete Neutralizer 5.3 Gal 480.00 2,544.00 B. Concrete Sealer/primer 10.5 Gal 900.00 9,450.00 C. Patching Compound 13.2 Gal 720.00 9,504.00 D.semi Gloss Latex 21.1 Gal 1,200.00 25,320.00 (two Coats Only ) #6 Roller Brush With Pond 2 Set 180.00 360.00 #4 Paint Brush 5 Pcs 110.00 550.00 #2 Paint Brush 5 Pcs 40.00 200.00 E. Consumable (5% Materials Cost) 2,396.40 Total Cost 50,324.40 (wood Painting) Particulars Qty Unit Unit Cost Total Amount A. Glazzing Putty 3 Gal 780.00 2,688.00 B. Flat Wall Enamel 2.4 Gal 1,150.00 2,760.00 C. Enamel Quick Dry 2.4 Gal 1,150.00 2,760.00 D.paint Thinner 14.8 L 150.00 2,220.00 E.tinting Color (optional) 0.6 Pint 195.00 117.00 #6 Roller Brush With Pond 2 Set 180.00 360.00 #4 Paint Brush 5 Pcs 111.00 555.00 #2 Paint Brush 5 Pcs 40.00 200.00 G. Consumable (5% Materials Cost) 565.70 Total Cost 11,877.70

Details: Description 1. The Department Of Education, Division Of Masbate Province, Through The Fy 2024 Gaa, Sub-allotment Release Order No. Ro-5-24-1862 Intends To Apply The Sum Of One Million Two Thousand Five Hundred Ninety-three And Seventy-three Centavos. (php1,002,593.73) Being The Abc To Payments Under The Contract For The Purchase And Delivery Of Science And Mathematics Equipment (sme) Packages For Public Elementary, Junior And Senior High Schools - Rebid. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Package Contents Item Description No. Of Recipient Schools Package Cost Abc Note: Each Package Contains The Following Items Listed Below: (a) Grades 1-3 5 Pcs Beaker Borosilicate 100ml 5pcs Beaker Borosilicate 500ml 40pcs Protractor Student Type 40pcs Plastic Ruler Beaker, Borosilicate, 100ml. Design Specifications: 1.type: Griffin, Low Form 2.shape: Cylindrical Container With Straight Sides, A Flat Bottom, And With A Small Spout (or “beak”) To Aid In Pouring 3.material: Borosilicate, Clear And Transparent Bubble-free Glass With The Following Dimensions: Outside Diameter:50mm-52mm Height:70mm-72mm Thickness:1.5mm-2.0mm 4.capacity:100ml±etched Onto The Glass 5.graduation Starts At:20ml In 10ml Increments 6. Graduation Range At:20ml To 80ml 7.with Permanent White Enamel Graduations Of Approximate Volumes, Inscriptions 8.with Large White Marking Spot 9.features An Easy-pour Spout 10.with Single Graduated Metric Scale 11.can Withstand Heating Up To 200-230c For Normal, Standard Use Service 12.wrapped In Paper, Enclosed In Bubble Wrap, And Packed In A Compartmentalized Box 13.must Be Free From Breakage, Cracks, Chipped Rims And Other Defects 14.comes With A Brand, With Five (5) Years Existence In The Glass Wares Industry. Beaker, Borosilicate 500ml 1. Type: Berzellius, Tall Form 2. Shape: Cylindrical Container With Straight Sides, A Flat Bottom, With A Small Spout (or "beak") To Aid Pouring 3. Material: Borosilicate, Clear, Bubble Free Glass Berzellius. Tall Form With The Following Dimensions: A. Outside Diameter Range: 75 Mm- 80 Mm B. Height Range: 136 Mm -140 Mm C. Thickness: 1.5 Mm To 2.0 Mm 4. Capacity :500 Ml ; ± 5% Etched/embossed Onto The Glass 5.with Permanent White Enamel Graduations Of Approximate Volumes, Inscriptions And 6. With Large White Marking Spot 7. With Easy Pour Spout 8. Double Graduated Metric Scale 9. Marked To Fill: Graduation Starts At 50 Ml, In 50 Ml, Increments 10. Marked To Empty: Graduation Starts At O Ml In 50 Ml, Increments 11. 11.can Withstand Heating Up To 200-2300 C For Normal, Standard Use Service 12.wrapped In Paper, Enclosed In Bubble Wrap And Packed Individually In A Compartmentalized Box 13.must Be Free From Breakage, Cracks, Chipped Rims And Other Defects 14.comes A Brand, With Five (5) Years Existence In The Glass Wares Indust Protractor, Student-type 1. Protractor, Student-type, Plastic, Transparent, Semi-circular, 1800• 2. Ø150mm (or 75mm Radius), 1mm Thick (minimum); 3. Angular Graduations Are In Degrees, From 00 To 1800. With Two (2) Sets Of Numerals, One Reading Clockwise And The Other Reading Counterclockwise; 4. Linear Graduations Are In Millimeters, From O To 100mm; 5. With A Hole At Vertex Point Enough For A Fine String To Pass Through It; 6. Plastic Surface Finish: Smooth, Clear, And Free From Scratches; 7. It Must Be Horizontally Level When Laid Flat On A Table - No Warping; 8. Comes With A Plastic Case. Ruler, Plastic, 12 Inches/30cm 1. Ruler, Plastic, Transparent, Smooth Surface, And 1 Mm Thick (minimum); 2. Approximate Width X Length: 28 Mm X 314 Mm; 3. Graduations: Metric Graduations On One Side While English Graduations On The Other Side: *metric Graduations Are In Centimeters, From O Cm To 30 Cm, With Every Cm Subdivided By 10. *english Graduations Are In Inches, From O Inches To 12 Inches, With Every Inch Subdivided By 16. 4. Clear, Readable Black, Non-groove Permanent Prints (will Not Fade And Cannot Be Scratched Off); 5. Bendable Up To U-shape When Held At Both Ends; And 6. The Item Shall Be Free From Toxic Materials. 91 2,850.00 259,350.00 Package Contents Item Description No. Of Recipient Schools Package Cost Abc B Grades 4-6 5 Pcs Beaker Borosilicate 100ml 5pcs Beaker Borosilicate 500ml 40pcs Protractor Student Type 40pcs Plastic Ruler Beaker, Borosilicate, 100ml. Design Specifications: 1.type: Griffin, Low Form 2.shape: Cylindrical Container With Straight Sides, A Flat Bottom, And With A Small Spout (or “beak”) To Aid In Pouring 3.material: Borosilicate, Clear And Transparent Bubble-free Glass With The Following Dimensions: Outside Diameter:50mm-52mm Height:70mm-72mm Thickness:1.5mm-2.0mm 4.capacity:100ml±etched Onto The Glass 5.graduation Starts At:20ml In 10ml Increments 6. Graduation Range At:20ml To 80ml 7.with Permanent White Enamel Graduations Of Approximate Volumes, Inscriptions 8.with Large White Marking Spot 9.features An Easy-pour Spout 10.with Single Graduated Metric Scale 11.can Withstand Heating Up To 200-230c For Normal, Standard Use Service 12.wrapped In Paper, Enclosed In Bubble Wrap, And Packed In A Compartmentalized Box 13.must Be Free From Breakage, Cracks, Chipped Rims And Other Defects 14.comes With A Brand, With Five (5) Years Existence In The Glass Wares Industry. Beaker, Borosilicate 500ml 1. Type: Berzellius, Tall Form 2. Shape: Cylindrical Container With Straight Sides, A Flat Bottom, With A Small Spout (or "beak") To Aid Pouring 3. Material: Borosilicate, Clear, Bubble Free Glass Berzellius. Tall Form With The Following Dimensions: A. Outside Diameter Range: 75 Mm- 80 Mm B. Height Range: 136 Mm -140 Mm C. Thickness: 1.5 Mm To 2.0 Mm 4. Capacity :500 Ml; ± 5% Etched/embossed Onto The Glass 5.with Permanent White Enamel Graduations Of Approximate Volumes, Inscriptions And 6. With Large White Marking Spot 7. With Easy Pour Spout 8. Double Graduated Metric Scale 9. Marked To Fill: Graduation Starts At 50 Ml, In 50 Ml, Increments 10. Marked To Empty: Graduation Starts At O Ml In 50 Ml, Increments 11. 11.can Withstand Heating Up To 200-2300 C For Normal, Standard Use Service 12.wrapped In Paper, Enclosed In Bubble Wrap And Packed Individually In A Compartmentalized Box 13.must Be Free From Breakage, Cracks, Chipped Rims And Other Defects 14.comes A Brand, With Five (5) Years Existence In The Glass Wares Indust Protractor, Student-type 1. Protractor, Student-type, Plastic, Transparent, Semi-circular, 1800• 2. Ø150mm (or 75mm Radius), 1mm Thick (minimum); 3. Angular Graduations Are In Degrees, From 00 To 1800. With Two (2) Sets Of Numerals, One Reading Clockwise And The Other Reading Counterclockwise; 4. Linear Graduations Are In Millimeters, From O To 100mm; 5. With A Hole At Vertex Point Enough For A Fine String To Pass Through It; 6. Plastic Surface Finish: Smooth, Clear, And Free From Scratches; 7. It Must Be Horizontally Level When Laid Flat On A Table - No Warping; 8. Comes With A Plastic Case. Ruler, Plastic, 12 Inches/30cm 1. Ruler, Plastic, Transparent, Smooth Surface, And 1 Mm Thick (minimum); 2. Approximate Width X Length: 28 Mm X 314 Mm; 3. Graduations: Metric Graduations On One Side While English Graduations On The Other Side: *metric Graduations Are In Centimeters, From O Cm To 30 Cm, With Every Cm Subdivided By 10. *english Graduations Are In Inches, From O Inches To 12 Inches, With Every Inch Subdivided By 16. 4. Clear, Readable Black, Non-groove Permanent Prints (will Not Fade And Cannot Be Scratched Off); 5. Bendable Up To U-shape When Held At Both Ends; And 6. The Item Shall Be Free From Toxic Materials. 80 2,850.00 228,0000 Package Contents Item Description Qty. Package Cost Total Amount C Junior Hs 5pcs Musical Instrument (miniature Guitar) 1 Set Of Tools 5 Pcs. Beaker, Borosilicate 1000ml 10boxes Glass Cover Slips 100’s/box 10 Boxes Glass Slides, 72’s/box 40pcs, Protractor, Student-type 40pcs, Ruler, Plastic, 12 Inches/30cm 10pcs Beaker, Borosilicate 100ml 10pcs Beaker, Borosilicate 500ml 1 Pc, Cork Borer 5pcs, Flask, Volumetric, Borosilicate 250ml 1spool, Per Package Nichrome Wire 0.4, 100ft 5pcs, Ph Meter, Hand-held 5 Pcs. Rubber Stopper #6 For Erlenmeyer: Flask (narrow -mouth) 250ml, 1hole 5 Pcs. Rubber Stopper #6 For Erlenmeyer: Flask (narrow -mouth) 250ml, 2hole 5pcs Triangular File, Fine, 6-inch Long With Plastic Handle 5packs Universal Ph Paper, Ph 0-14, 100strips/pack Musical Instrument (miniature Guitar) 1. Mini Acoustic Type, Half-size Guitar, Any Color, Surface Finish: Varnish 2. Made Of Good Quality Wood Without Any Sign Of Obstruction Or Getting Struck Or Loosen Up Warp 3. Minimum Dimensions: Overall Length: 33 Inches, Width: 12 Inches, Depth: 3 1/2 Inches 4. Standard Guitar Steel Strings (nos. 1-6), 18 Fret Minimum Set Of Tools 1. Ballpen Hammer, Handle Length Is 11”, 350g Approx. Weight, 1pcs/set 2. Long Nose Pliers, 6”, 1 Pair/set 3. Mechanical Wire Cutter And Pliers, 6.5”, 1 Pair/set 4.precision Screwdrivers Set, 6 Pcs/set, Withb Plastic Casing, 1 Set/set 5. Screwdriver, Flat 6”, 1pc/set 6. Screwdriver, Phillips, 6”, 1 Pc/set 7. Soldering Iron, 60watts, 1 Pc/set 8. Soldering Lead, 1mm Diameter 9. Soldering Paste, 50 Grams/can, 1 Can/set 10. Tweezers, Stainless Steel, With Curved Tips, 6.5” Long, 1 Pair/set Beaker, Borosilicate, 1000ml. 1. Griffin Type, Borosilicate, Transparent, Bubble-free Glass 2. Shape: A Cylindrical Container With Flat Bottom 3. Thickness Range: 1.5 Mm To 2.0 Mm 4. Permanent White Graduations, With White Enamel Marking Spot 5. Features An Easy-pour Spout 6. Capacity: 1000 Ml}, ± 10% Enameled Onto The Glass 7. Single Graduated Metric Scale 8. Graduation Starts At 200 Ml, In 100 Ml, Increments 9. Height Range: 140 Mm To 160 Mm 10. Outside Diameter: 100 Mm To 110 Mm 11. There Must Be No Cracks And Sharp Parts Safely Packed In A Compartmentalized Box Glass Cover Slips, 1oo's/box 1. Pre-cleaned Cover Glasses And Not Sticking From Each Other 2. Material: Transparent Glass 3. Quantity: 100's/small Plastic Box 4. Dimension: 22 Mm X 22 Mm Square 5. Thickness: O. 13 Mm - 0.17 Mm 7. There Shall Be No Chipped Edges 8. Safely Packed In A Plastic Box Glass Slides, 72’s/box 1. Clear, Flat Glass; Free From Moisture, Dirt, And Film; 2. No Color, No Frost And No Chipped Edges 3. Dimension: 75 Mm (±i Mm) X 25 Mm (± I Mm); 4. Thickness: 1.1 Mm (± 0.1 Mm) No Sharp Edges And Pointed Corners 5. Packed In A Box Containing 72 Slides With Thin Paper Sheets In Between Them Protractor, Student-type 1. Protractor, Student-type, Plastic, Transparent, Semi-circular, 1800• 2. Ø150mm (or 75mm Radius), 1mm Thick (minimum); 3. Angular Graduations Are In Degrees, From 00 To 1800. With Two (2) Sets Of Numerals, One Reading Clockwise And The Other Reading Counterclockwise; 4. Linear Graduations Are In Millimeters, From O To 100mm; 5. With A Hole At Vertex Point Enough For A Fine String To Pass Through It; 6. Plastic Surface Finish: Smooth, Clear, And Free From Scratches; 7. It Must Be Horizontally Level When Laid Flat On A Table - No Warping; 8. Comes With A Plastic Case. Ruler, Plastic, 12 Inches/30cm 1. Ruler, Plastic, Transparent, Smooth Surface, And 1 Mm Thick (minimum); 2. Approximate Width X Length: 28 Mm X 314 Mm; 3. Graduations: Metric Graduations On One Side While English Graduations On The Other Side: *metric Graduations Are In Centimeters, From O Cm To 30 Cm, With Every Cm Subdivided By 10. *english Graduations Are In Inches, From O Inches To 12 Inches, With Every Inch Subdivided By 16. 4. Clear, Readable Black, Non-groove Permanent Prints (will Not Fade And Cannot Be Scratched Off); 5.bendable Up To U-shape When Held At Both Ends; And 6.the Item Shall Be Free From Toxic Materials. Beaker, Borosilicate, 100ml. Design Specifications: 1. Type: Griffin, Low Form 2. Shape: Cylindrical Container With Straight Sides, A Flat Bottom, And With A Small Spout (or “beak”) To Aid In Pouring 3. Material: Borosilicate, Clear And Transparent Bubble-free Glass With The Following Dimensions: Outside Diameter:50mm-52mm Height:70mm-72mm Thickness:1.5mm-2.0mm 4. Capacity:100ml±etched Onto The Glass 5. Graduation Starts At:20ml In 10ml Increments 6. Graduation Range At:20ml To 80ml 7. With Permanent White Enamel Graduations Of Approximate Volumes, Inscriptions 8. With Large White Marking Spot 9. Features An Easy-pour Spout 10. With Single Graduated Metric Scale 11. Can Withstand Heating Up To 200-230c For Normal, Standard Use Service 12. Wrapped In Paper, Enclosed In Bubble Wrap, And Packed In A Compartmentalized Box 13. Must Be Free From Breakage, Cracks, Chipped Rims And Other Defects 14. Comes With A Brand, With Five (5) Years Existence In The Glass Wares Industry. Beaker, Borosilicate 500ml 1. Type: Berzellius, Tall Form 2. Shape: Cylindrical Container With Straight Sides, A Flat Bottom, With A Small Spout (or "beak") To Aid Pouring 3. Material: Borosilicate, Clear, Bubble Free Glass Berzellius. Tall Form With The Following Dimensions: A. Outside Diameter Range: 75 Mm- 80 Mm B. Height Range: 136 Mm -140 Mm C. Thickness: 1.5 Mm To 2.0 Mm 4. Capacity :500 Ml; ± 5% Etched/embossed Onto The Glass 5. With Permanent White Enamel Graduations Of Approximate Volumes, Inscriptions And 6. With Large White Marking Spot 7. With Easy Pour Spout 8. Double Graduated Metric Scale 9. Marked To Fill: Graduation Starts At 50 Ml, In 50 Ml, Increments 10. Marked To Empty: Graduation Starts At O Ml In 50 Ml, Increments 11. 11. Can Withstand Heating Up To 200-2300 C For Normal, Standard Use Service 12. Wrapped In Paper, Enclosed In Bubble Wrap And Packed Individually In A Compartmentalized Box 13. Must Be Free From Breakage, Cracks, Chipped Rims And Other Defects 14.comes A Brand, With Five (5) Years Existence In The Glass Wares Industry Cork Borer 1. Shape Of Cork Borer : Long, Hollow Round Rod/tube With Sharpened Ends 2. Material Of Tube/rod: Nickel-plated Steel Borer 3. A Set Of Six (6) Different Diameter Sizes:(4 Mm, 4.5 Mm, 6 Mm, 8 Mm, 9.5 Mm, Il Mm) 4. Comes With A Handles Which Are Individually And Permanently Numbered (1-6) For Easy Identification Handle A) Shape Of Handle: T-shaped B) Material Of Handle : Hard Plastic C) Finish: Smooth D) C010r Of Handle: Red 5. Includes A Ramrod/ Eject Rod Pushing The Removed Cork Out Of The Borer Material Of Ramrod/eject Rod: Steel 6.packaging: Resealable Plastic Pouch Comes With A Brand. Flask, Volumetric, Borosilicate 250ml 1. Type: Class A 2. Shape: A Round Or Pear-shaped Bulb, A Long Thin Neck Topped By Snap Cap And With Flat Bottom 3. Material Of Body: Borosilicate, Clear, Transparent And Bubble-free, Glass With The Following Dimensions: A. Height: 225 Mm B. Outside Diameter: 78 Mm (approx.) C. Size: 250 Rnl D. Tolerance: ± O. 12 Rnl 4. A. Material Of Snap Cap: High Density Plastic (polyethylene) B. With Octagonal Grip C. Snap-cap: No. 250 D. Color Of Snap Cap: Blue 5. Must Meet Astm E- 694 For Volumetric Ware, Astm E-542 For Calibration Of Volumetric Ware And Astm E-288 For Volumetric Flasks. 6. Calibrated "to Contain" (marked "tc" Or "in") 7. Manufacturer Should Be Accredited By Nist Standards Or Its Equivalent To The Country Of Origin To That Their Items Are Calibrated. 8. Must Be Free From Breakage, Cracks, Sharp Rims And Other Defects 10. Packaging: Roll Up Glassware In Newspaper And Secure With A Piece Of Masking Tape And Place In A Bubble Pouch And Individually Packed In A Sturdy Box Il. Comes With A Brand, With Five (5) Years Existence In The Glass Wares Industry. Nichrome Wire. 0.4, 100 Ft. 1. Shape: Round Wire 2. Material Of Wire: Nichrome-a110y Of Nickel And Chromium, Ni80 Cr20 With The Following Dimensions: Awg Size: 26 A. Diameter: 0.4 Mm B. Length: 100 Ft 3. Form: Soft, Rust-free Wire 4. Color: Silvery Grey 5. Resistance: 2.57 Ohms/foot 6. Annealed Soft 7. Perfectly Tensioned. Zero Elongation, Scratches, Or Other Flaws. 8. Comes In A Spool 9. Packed In A Resealable Plastic Pouch 10. Comes With A Brand Ph Meter, Hand-held 1. Type: Portable Hand Held Digital Pen Type 2. Material: Plastic With The Following Dimensions A) Length: 6.2 In (155.45 Mm) (min) B) Width: 1.5 In (38.1 Mm) (min) C) Height: 1.3 In (33.02 Mm) (min) 3. With Retractable Electrode 4. Comes With One (1) Pc Protective Cap 5. Electrodes Extend Up To 3.15" (80.01 Mm) (min) 6. Waterproof 7. Ph Range: Ph O To Ph 14 8. Accuracy: ± 0.2 Ph 9. Features A Bold Lcd Display Of Ph 10. With Automatic Temperature Compensation 11. Supplied With Accessories A) One (i) Bottle Ph 7.0 Buffer Solution Capacity Of Ph 7.0 Buffer Solution: 50 Rnl Rubber Stopper # 6 For Erlenmeyer Flask (narrow-mouth) 250 Ml, 1 Hole 1. Shape: Cylindrical With A Tapered Bottom End 2. Material: Premium Grade Sbr Black Rubber Compound With The Following Dimensions: A. Height: 25 Mm B. Top Õ: 32 Mm C. Bottom Ø : 26 Mm D. Hole Õ: 5 Mm 3. Number Of Holes: With One (1) Hole 4. Dimension Tolerance On Height, Top And Bottom Diameter • ± 0.5 5. Hardness: 40 ± 5 Duro 6. Packed In Resealable Plastic Bag 7.cornes With A Brand Rubber Stopper # 6 For Erlenmeyer Flask (narrow-mouth) 250 Ml, 2 Holes 1. Shape: Cylindrical With A Tapered Bottom End 2. Material: Premium Grade Sbr Black Rubber Compound With The Following Dimensions: A. Height: 25 Mm B. Top Õ: 32 Mm C. Bottom Ø : 26 Mm D. Hole Õ: 5 Mm 3.number Of Holes: With One (1) Hole 4. Dimension Tolerance On Height, Top And Bottom Diameter • ± 0.5 5. Hardness: 40 ± 5 Duro 6. Packed In Resealable Plastic Bag 7.cornes With A Brand Triangular File, Fine, 6-inch-long With Plastic Handle 1.type Of File: Triangular 2.shape: Triangular 3.material: High Carbon Steel 4.kind Of File: Fine, Smooth 5.length Of File: 6" (150-152.4 Mm) Long 6.material Of Handle: Plastic 7.packed In A Resealable Pouch 8.comes With A Brand Universal Ph Paper, Ph 0-14, 100 Strips / Pack 1.type: Test Strips 2.shape: Rectangle 3.material: Cellulose/paper Based 4. Dimension Of Ph Strip A) Length: 69 Mm X 6 Mm 5.number Of Colors In Indicator Test Strip: In Four Colors To Test Ph Values 6.number Of Test Strips: 100 Pc Strips 7.packaging: Clear, Transparent Box 8.shape Of Box: Square 9.with Complete Color Chart For Comparison With The Color Change To Get The Ph Reading Of The Sample Being Tested 10.no Sharp Edges On Box 11.measures Ph O-ph 14 12.comes With A Brand 21 18,000.00 378,000.00 Package Contents Item Description Qty. Package Cost Total Amount D Shs-stem 5 Pcs Beaker, Plastic 500ml 5 Pcs Dry Cell, 9 Volts 5 Pcs Musical Instrument 5 Pcs Beaker Borosilicate 100ml 5pcs Beaker Borosilicate 500ml 1 Pc, Cork Borer 5pcs, Flask, Volumetric, Borosilicate 250ml 1spool, Per Package Nichrome Wire 0.4, 100ft 5pcs, Ph Meter, Hand-held 5 Pcs. Rubber Stopper #6 For Erlenmeyer: Flask (narrow -mouth) 250ml, 1hole 5 Pcs. Rubber Stopper #6 For Erlenmeyer: Flask (narrow -mouth) 250ml, 2hole 5pcs Triangular File, Fine, 6-inch Long With Plastic Handle 5packs Universal Ph Paper, Ph 0-14, 100strips/pack Beaker, Plastic Measure 500 Rnl Of Water Using A Standard 100 Ml, Graduated Cylinder, And Pour Into It To Check The Accuracy And Preciseness Of The Printed Graduations And Verify Whether The Required Minimum/maxim Urn Volumetric Capacity Of The Glass, As Stipulated In The Technical Specifications, Is Met. The Capacity Must. Be 500 Ml}. ± 10% Dry Cell, 9 Volts I. Set The Blr Reference Digital Multimeter To 20vdc A. Insert The Black Test Probe To The "com" Terminal Of The Digital Multi Meter And The Red Test Probe To The "vqhz" Terminal Of The Digital Multimeter B. Switch On The Digital Multi Meter Connect The Black Test Lead Of The Blr Reference Digital Multimeter To The Negative Terminal Of The Dry Cell And The Red Test Lead To The Positive Terminal Of The Dry Cell C. The Blr Reference Digital Multi Meter Should Register A Reading Of At Least 9.0 Volts Dc Musical Instrument (miniature Guitar) 1.mini Acoustic Type, Half-size Guitar, Any Color, Surface Finish: Varnish 2.made Of Good Quality Wood Without Any Sign Of Obstruction Or Getting Struck Or Loosen Up Warp 3.minimum Dimensions: Overall Length: 33 Inches, Width: 12 Inches, Depth: 3 1/2 Inches 4.standard Guitar Steel Strings (nos. 1-6), 18 Fret Minimum Beaker, Borosilicate, 100ml. Design Specifications: 1. Type: Griffin, Low Form 2. Shape: Cylindrical Container With Straight Sides, A Flat Bottom, And With A Small Spout (or “beak”) To Aid In Pouring 3. Material: Borosilicate, Clear And Transparent Bubble-free Glass With The Following Dimensions: Outside Diameter:50mm-52mm Height:70mm-72mm Thickness:1.5mm-2.0mm 4. Capacity:100ml±etched Onto The Glass 5. Graduation Starts At:20ml In 10ml Increments 6. Graduation Range At:20ml To 80ml 7. With Permanent White Enamel Graduations Of Approximate Volumes, Inscriptions 8. With Large White Marking Spot 9. Features An Easy-pour Spout 10. With Single Graduated Metric Scale 11. Can Withstand Heating Up To 200-230c For Normal, Standard Use Service 12. Wrapped In Paper, Enclosed In Bubble Wrap, And Packed In A Compartmentalized Box 13. Must Be Free From Breakage, Cracks, Chipped Rims And Other Defects 14. Comes With A Brand, With Five (5) Years Existence In The Glass Wares Industry. Beaker, Borosilicate 500ml 1. Type: Berzellius, Tall Form 2. Shape: Cylindrical Container With Straight Sides, A Flat Bottom, With A Small Spout (or "beak") To Aid Pouring 3. Material: Borosilicate, Clear, Bubble Free Glass Berzellius. Tall Form With The Following Dimensions: A. Outside Diameter Range: 75 Mm- 80 Mm B. Height Range: 136 Mm -140 Mm C. Thickness: 1.5 Mm To 2.0 Mm 4. Capacity :500 Ml; ± 5% Etched/embossed Onto The Glass 5. With Permanent White Enamel Graduations Of Approximate Volumes, Inscriptions And 6. With Large White Marking Spot 7. With Easy Pour Spout 8. Double Graduated Metric Scale 9. Marked To Fill: Graduation Starts At 50 Ml, In 50 Ml, Increments 10. Marked To Empty: Graduation Starts At O Ml In 50 Ml, Increments 11. 11. Can Withstand Heating Up To 200-2300 C For Normal, Standard Use Service 12. Wrapped In Paper, Enclosed In Bubble Wrap And Packed Individually In A Compartmentalized Box 13. Must Be Free From Breakage, Cracks, Chipped Rims And Other Defects 14.comes A Brand, With Five (5) Years Existence In The Glass Wares Industry Cork Borer 1. Shape Of Cork Borer: Long, Hollow Round Rod/tube With Sharpened Ends 2. Material Of Tube/rod: Nickel-plated Steel Borer 3. A Set Of Six (6) Different Diameter Sizes:(4 Mm, 4.5 Mm, 6 Mm, 8 Mm, 9.5 Mm, Il Mm) 4. Comes With A Handle Which Are Individually And Permanently Numbered (1-6) For Easy Identification Handle D) Shape Of Handle: T-shaped E) Material Of Handle: Hard Plastic F) Finish: Smooth D) C010r Of Handle: Red 5. Includes A Ramrod/ Eject Rod Pushing The Removed Cork Out Of The Borer Material Of Ramrod/eject Rod: Steel 6.packaging: Resealable Plastic Pouch Comes With A Brand. Flask, Volumetric, Borosilicate 250ml 1. Type: Class A 2. Shape: A Round Or Pear-shaped Bulb, A Long Thin Neck Topped By Snap Cap And With Flat Bottom 3. Material Of Body: Borosilicate, Clear, Transparent And Bubble-free, Glass With The Following Dimensions: A. Height: 225 Mm B. Outside Diameter: 78 Mm (approx.) C. Size: 250 Rnl D. Tolerance: ± O. 12 Rnl 4. A. Material Of Snap Cap: High Density Plastic (polyethylene) B. With Octagonal Grip C. Snap-cap: No. 250 D. Color Of Snap Cap: Blue 5. Must Meet Astm E- 694 For Volumetric Ware, Astm E-542 For Calibration Of Volumetric Ware And Astm E-288 For Volumetric Flasks. 6. Calibrated "to Contain" (marked "tc" Or "in") 7. Manufacturer Should Be Accredited By Nist Standards Or Its Equivalent To The Country Of Origin To That Their Items Are Calibrated. 8. Must Be Free From Breakage, Cracks, Sharp Rims And Other Defects 10. Packaging: Roll Up Glassware In Newspaper And Secure With A Piece Of Masking Tape And Place In A Bubble Pouch And Individually Packed In A Sturdy Box Il. Comes With A Brand, With Five (5) Years Existence In The Glass Wares Industry. Nichrome Wire. 0.4, 100 Ft. 1. Shape: Round Wire 2. Material Of Wire: Nichrome-a110y Of Nickel And Chromium, Ni80 Cr20 With The Following Dimensions: Awg Size: 26 A. Diameter: 0.4 Mm B. Length: 100 Ft 3. Form: Soft, Rust-free Wire 4. Color: Silvery Grey 5. Resistance: 2.57 Ohms/foot 6. Annealed Soft 7. Perfectly Tensioned. Zero Elongation, Scratches, Or Other Flaws. 8. Comes In A Spool 9. Packed In A Resealable Plastic Pouch 10. Comes With A Brand Ph Meter, Hand-held 1. Type: Portable Hand-held Digital Pen Type 2. Material: Plastic With The Following Dimensions D) Length: 6.2 In (155.45 Mm) (min) E) Width: 1.5 In (38.1 Mm) (min) F) Height: 1.3 In (33.02 Mm) (min) 3. With Retractable Electrode 4. Comes With One (1) Pc Protective Cap 5. Electrodes Extend Up To 3.15" (80.01 Mm) (min) 6. Waterproof 7. Ph Range: Ph O To Ph 14 8. Accuracy: ± 0.2 Ph 9. Features A Bold Lcd Display Of Ph 10. With Automatic Temperature Compensation 11. Supplied With Accessories A) One (i) Bottle Ph 7.0 Buffer Solution Capacity Of Ph 7.0 Buffer Solution: 50 Rnl Rubber Stopper # 6 For Erlenmeyer Flask (narrow-mouth) 250 Ml, 1 Hole 1. Shape: Cylindrical With A Tapered Bottom End 2. Material: Premium Grade Sbr Black Rubber Compound With The Following Dimensions: A. Height: 25 Mm B. Top Õ: 32 Mm C. Bottom Ø : 26 Mm D. Hole Õ: 5 Mm 3. Number Of Holes: With One (1) Hole 4. Dimension Tolerance On Height, Top And Bottom Diameter • ± 0.5 5. Hardness: 40 ± 5 Duro 6. Packed In Resealable Plastic Bag 7.cornes With A Brand Rubber Stopper # 6 For Erlenmeyer Flask (narrow-mouth) 250 Ml, 2 Holes 1. Shape: Cylindrical With A Tapered Bottom End 2. Material: Premium Grade Sbr Black Rubber Compound With The Following Dimensions: A. Height: 25 Mm B. Top Õ: 32 Mm C. Bottom Ø : 26 Mm D. Hole Õ: 5 Mm 3.number Of Holes: With One (1) Hole 4. Dimension Tolerance On Height, Top And Bottom Diameter • ± 0.5 5. Hardness: 40 ± 5 Duro 6. Packed In Resealable Plastic Bag 7.cornes With A Brand Triangular File, Fine, 6-inch-long With Plastic Handle 1.type Of File: Triangular 2.shape: Triangular 3.material: High Carbon Steel 4.kind Of File: Fine, Smooth 5.length Of File: 6" (150-152.4 Mm) Long 6.material Of Handle: Plastic 7.packed In A Resealable Pouch 8.comes With A Brand Universal Ph Paper, Ph 0-14, 100 Strips / Pack 1.type: Test Strips 2.shape: Rectangle 3.material: Cellulose/paper Based 4. Dimension Of Ph Strip A) Length: 69 Mm X 6 Mm 5.number Of Colors In Indicator Test Strip: In Four Colors To Test Ph Values 6.number Of Test Strips: 100 Pc Strips 7.packaging: Clear, Transparent Box 8.shape Of Box: Square 9.with Complete Color Chart For Comparison With The Color Change To Get The Ph Reading Of The Sample Being Tested 10.no Sharp Edges On Box 11.measures Ph O-ph 14 12.comes With A Brand 5 14,500.00 72,500.00 Package Contents Item Description Qty. Package Cost Total Amount E Shs-core 1 Set Of Tools 10pcs, Beaker, Borosilicate, 100ml 5pcs, Beaker Borosilicate 500ml 1pc Cork Borer 5pcs Flask, Volumetric, Borosilicate 250ml 1spool Nichrome Wire, 0.4, 100ft 5pcs Ph Meter, Hand-held 5pcs Rubber Stopper #6 For Erlenmeyer Flask (narrow-mouth) 250ml 1hole 5pcs Rubber Stopper #6 For Erlenmeyer Flask (narrow-mouth) 250ml 2holes 5pcs Triangular File, Fine, 6 Inch Long With Plastic Handle 5packs Universal Ph Paper, Ph 0-14, 100 Strips/pack Set Of Tools 1.ballpen Hammer, Handle Length Is 11”, 350g Approx. Weight, 1pcs/set 2.long Nose Pliers, 6”, 1 Pair/set 3.mechanical Wire Cutter And Pliers, 6.5”, 1 Pair/set 4.precision Screwdrivers Set, 6 Pcs/set, Withb Plastic Casing, 1 Set/set 5.screwdriver, Flat 6”, 1pc/set 6.screwdriver, Phillips, 6”, 1 Pc/set 7.soldering Iron, 60watts, 1 Pc/set 8.soldering Lead, 1mm Diameter 9.soldering Paste, 50 Grams/can, 1 Can/set 10.tweezers, Stainless Steel, With Curved Tips, 6.5” Long, 1 Pair/set Beaker, Borosilicate, 100ml. Design Specifications: 1.type: Griffin, Low Form 2.shape: Cylindrical Container With Straight Sides, A Flat Bottom, And With A Small Spout (or “beak”) To Aid In Pouring 3.material: Borosilicate, Clear And Transparent Bubble-free Glass With The Following Dimensions: Outside Diameter:50mm-52mm Height:70mm-72mm Thickness:1.5mm-2.0mm 4.capacity:100ml±etched Onto The Glass 5.graduation Starts At:20ml In 10ml Increments 6. Graduation Range At:20ml To 80ml 7.with Permanent White Enamel Graduations Of Approximate Volumes, Inscriptions 8.with Large White Marking Spot 9.features An Easy-pour Spout 10.with Single Graduated Metric Scale 11.can Withstand Heating Up To 200-230c For Normal, Standard Use Service 12.wrapped In Paper, Enclosed In Bubble Wrap, And Packed In A Compartmentalized Box 13.must Be Free From Breakage, Cracks, Chipped Rims And Other Defects 14.comes With A Brand, With Five (5) Years Existence In The Glass Wares Industry. Beaker, Borosilicate 500ml I. Type: Berzellius, Tall Form 2. Shape: Cylindrical Container With Straight Sides, A Flat Bottom, With A Small Spout (or "beak") To Aid Pouring 3.material: Borosilicate, Clear, Bubble Free Glass Berzellius. Tall Form With The Following Dimensions: A. Outside Diameter Range: 75 Mm- 80 Mm B. Height Range: 136 Mm -140 Mm C. Thickness: 1.5 Mm To 2.0 Mm 4. Capacity :500 Ml; ± 5% Etched/embossed Onto The Glass 5.with Permanent White Enamel Graduations Of Approximate Volumes, Inscriptions And 6.with Large White Marking Spot 7.with Easy Pour Spout 8.double Graduated Metric Scale 9.marked To Fill: Graduation Starts At 50 Ml, In 50 Ml, Increments 10.marked To Empty: Graduation Starts At O Ml In 50 Ml, Increments 11. 11.can Withstand Heating Up To 200-2300 C For Normal, Standard Use Service 12. Wrapped In Paper, Enclosed In Bubble Wrap And Packed Individually In A Compartmentalized Box 13.must Be Free From Breakage, Cracks, Chipped Rims And Other Defects 14.comes A Brand, With Five (5) Years Existence In The Glass Wares Industry Cork Borer 1.shape Of Cork Borer : Long, Hollow Round Rod/tube With Sharpened Ends 2.material Of Tube/rod : Nickel-plated Steel Borer 3.a Set Of Six (6) Different Diameter Sizes:(4 Mm, 4.5 Mm, 6 Mm, 8 Mm, 9.5 Mm, Il Mm) 4.comes With A Handle Which Are Individually And Permanently Numbered (1-6) For Easy Identification Handle G) Shape Of Handle: T-shaped H) Material Of Handle: Hard Plastic I) Finish: Smooth D)c010r Of Handle: Red 5.includes A Ramrod/ Eject Rod Pushing The Removed Cork Out Of The Borer Material Of Ramrod/eject Rod: Steel 6.packaging: Resealable Plastic Pouch Comes With A Brand. Flask, Volumetric, Borosilicate 250ml 1.type: Class A 2.shape: A Round Or Pear-shaped Bulb, A Long Thin Neck Topped By Snap Cap And With Flat Bottom 3.material Of Body: Borosilicate , Clear, Transparent And Bubble-free, Glass With The Following Dimensions: A. Height: 225 Mm B. Outside Diameter: 78 Mm (approx.) C. Size: 250 Rnl D. Tolerance: ± O. 12 Rnl 4. A. Material Of Snap Cap: High Density Plastic (polyethylene) B. With Octagonal Grip C. Snap-cap: No. 250 D. Color Of Snap Cap: Blue 5.must Meet Astm E- 694 For Volumetric Ware, Astm E-542 For Calibration Of Volumetric Ware And Astm E-288 For Volumetric Flasks. 6.calibrated "to Contain" (marked "tc" Or "in") 7.manufacturer Should Be Accredited By Nist Standards Or Its Equivalent To The Country Of Origin To That Their Items Are Calibrated. 8.must Be Free From Breakage, Cracks, Sharp Rims And Other Defects 10. Packaging: Roll Up Glassware In Newspaper And Secure With A Piece Of Masking Tape And Place In A Bubble Pouch And Individually Packed In A Sturdy Box Il. Comes With A Brand, With Five (5) Years Existence In The Glass Wares Industry. Nichrome Wire. 0.4, 100 Ft 1.shape: Round Wire 2.material Of Wire: Nichrome-a110y Of Nickel And Chromium, Ni80 Cr20 With The Following Dimensions: Awg Size: 26 A. Diameter: 0.4 Mm B. Length : 100 Ft 3.form: Soft, Rust-free Wire 4.color: Silvery Grey 5. Resistance: 2.57 Ohms/foot 6. Annealed Soft 7. Perfectly Tensioned. Zero Elongation, Scratches, Or Other Flaws. 8. Comes In A Spool 9. Packed In A Resealable Plastic Pouch 10. Comes With A Brand Ph Meter, Hand-held 1.type: Portable Hand-held Digital Pen Type 2. Material: Plastic With The Following Dimensions G) Length: 6.2 In (155.45 Mm) (min) H) Width: 1.5 In (38.1 Mm) (min) I) Height: 1.3 In (33.02 Mm) (min) 3.with Retractable Electrode 4.comes With One (1) Pc Protective Cap 5.electrodes Extend Up To 3.15" (80.01 Mm) (min) 6.waterproof 7.ph Range: Ph O To Ph 14 8.accuracy: ± 0.2 Ph 9.features A Bold Lcd Display Of Ph 10.with Automatic Temperature Compensation 11.supplied With Accessories A) One (i) Bottle Ph 7.0 Buffer Solution Capacity Of Ph 7.0 Buffer Solution: 50 Rnl Rubber Stopper # 6 For Erlenmeyer Flask (narrow-mouth) 250 Ml, 1 Hole 1.shape: Cylindrical With A Tapered Bottom End 2. Material: Premium Grade Sbr Black Rubber Compound With The Following Dimensions: A. Height: 25 Mm B. Top Õ: 32 Mm C. Bottom Ø : 26 Mm D. Hole Õ: 5 Mm 3.number Of Holes :with One (1) Hole 4.dimension Tolerance On Height, Top And Bottom Diameter • ± 0.5 5. Hardness: 40 ± 5 Duro 6.packed In Resealable Plastic Bag 7.cornes With A Brand Rubber Stopper # 6 For Erlenmeyer Flask (narrow-mouth) 250 Ml, 2 Holes 1.shape: Cylindrical With A Tapered Bottom End 2. Material: Premium Grade Sbr Black Rubber Compound With The Following Dimensions: A. Height: 25 Mm B. Top Õ: 32 Mm C. Bottom Ø : 26 Mm D. Hole Õ: 5 Mm 3.number Of Holes: With One (1) Hole 4.dimension Tolerance On Height, Top And Bottom Diameter • ± 0.55. Hardness: 40 ± 5 Duro 6.packed In Resealable Plastic Bag 7.cornes With A Brand Triangular File, Fine, 6 Inch Long With Plastic Handle 1.type Of File: Triangular 2.shape: Triangular 3.material: High Carbon Steel 4.kind Of File: Fine, Smooth 5.length Of File: 6" (150-152.4 Mm) Long 6.material Of Handle: Plastic 7.packed In A Resealable Pouch 8.comes With A Brand Universal Ph Paper, Ph 0-14, 100 Strips / Pack 1.type: Test Strips 2.shape: Rectangle 3.material: Cellulose/paper Based 4. Dimension Of Ph Strip A) Length: 69 Mm X 6 Mm 5.number Of Colors In Indicator Test Strip: In Four Colors To Test Ph Values 6.number Of Test Strips: 100 Pc Strips 7.packaging: Clear, Transparent Box 8.shape Of Box: Square 9.with Complete Color Chart For Comparison With The Color Change To Get The Ph Reading Of The Sample Being Tested 10.no Sharp Edges On Box 11.measures Ph O-ph 14 12.comes With A Brand 2 13,500.00 27,000.00 Delivery Cost 37,743.73 Total Abc 1,002,593.73 2. The Department Of Education, Division Of Masbate Province, Through The Bids And Awards Committee (bac), Now Invites Bids For The Goods And Services Contemplated In This Project And As Detailed In The Schedule Of Requirements And The Table Of Technical Specifications Indicated In The Bidding Documents. Expected Completion Of Delivery Of The Goods Is Sixty (60) Calendar Days Upon Receipt Of Notice To Proceed (ntp) At Deped Masbate Province Districts/central Schools Drop-off Points. Prospective Bidders Should Have Completed, Within Five (5) Years Immediately Preceding The Deadline For The Submission Of Bids, Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid And The Value Of Which, Adjusted, If Necessary, By The Bidder To Current Prices Using The Philippine Statistics Authority (psa) Consumer Price Index, Must Be At Least Fifty (50%) Of The Abc Of The Lot Bid For; Or, At Least Two (2) Similar Contracts And The Total Of The Aggregated Contract Amount Should Be Equivalent To At Least Twenty-five (25%) Of The Abc Of The Lot Bid For; And The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Required Percentage Of The Abc Of The Project To Be Bid. The Contracts May Come From Different Agencies/companies. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Department Of Education, Division Of Masbate Province And Inspect The Bidding Documents At The Address Given In Item No. 11 From 8:00 A.m. To 5:00 P.m. February 25, 2025 (tuesday) – March 14, 2025 (friday), Excluding Saturdays, Sundays, Non-working Holidays And 8:00 A.m – 12:00 P.m. March 17, 2025 (monday) At The Bac Secretariat/procurement Office, Deped Division Of Masbate Province. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On 8:00 A.m. To 5:00 P.m. February 25, 2025 (tuesday) – March 14, 2025 (friday), Excluding Saturdays, Sundays, Non-working Holidays And 8:00 A.m – 12:00 P.m. March 17, 2025 (monday) At The Bac Secretariat/procurement Office, Deped Division Of Masbate Province Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only (php 5,000.00). It Can Also Be Acquired For Free By Downloading Through Philgeps Website And Agency Website. Bid Documents Should Be Paid Before Bid Submission 6. The Department Of Education, Division Of Masbate Province Will Hold A Pre-bid Conference On March 5, 2025, 10:00 A.m. At Executive Lounge, Deped Division Of Masbate, Rodeo Road, Masbate City. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual/physical Submission On Or Before March 17, 2025, 12:00 P.m. (pagasa Time) Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be March 17, 2025, 1:00 P.m. At Executive Lounge, Deped Division Of Masbate, Rodeo Road, Masbate City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Education, Division Of Masbate Province Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Contact: Maria Theresa A. Basas, Cpa Bac Secretariat/procurement Office Department Of Education, Division Of Masbate Division Office, Procurement Section Mobile No. 0929-4905672 Email Address: Procurement@depedmasbate.ph 12. You May Visit The Following Websites: Philgeps.gov.ph And/or Depedmasbate.ph Maria Sheila V. Lagoda Bac Chairperson

Details: Description Request For Quotation (rfq) Supply And Delivery Of Construction Materials To Be Use In Repair Of Guard House And Pathway Sir/madam: Please Quote Your Price For The Article Described Below With The Request That The Condition Or Requirement To Be Complied With An Approved Budget For The Contract (abc) In The Amount Of Php 526,000.64, You Are Hereby Invited To Submit Your Open Price Quotation On Or Before 10:00 A.m., February 28, 2025, Failure To Submit Means Disqualification. Purpose: Procurement Of Supply And Delivery Of Construction Materials To Be Use In Repair Of Guard House And Pathway Item Qty. Uom Description 1 128.83 Lits. Fuel (gasoline) 2 16.05 Cu.m Gravel Bedding (g1) (w/ 5% Shringkage Factor) 3 13.52 Cu.m Sand 4 212.11 Bags Portland Cement 5 737.96 Kg Deformed Reinforcing Steel 6 11.17 Kg #16 Galvanized Iron Wire 7 2.89 Pcs Ordinary Plywood (0.0125thk) - 3 Uses 8 59.92 Bd.ft Good Lumber - 3 Uses 9 5.25 Kg Assorted Common Wire Nails 10 6.00 M 100mm(4") Dia. Upvc Pipe, Series 1000 11 4.00 Pc Upvc 90 Deg. Elbow, 4", Series 1000 12 2.00 Pc Upvc Coupling 4", Series 1000 13 1.00 Lits. Pvc Pipe Solvent Cement 14 2.00 Pc 75mm Dia. Galvanized Iron Pipe 15 32.53 Pc 4.5mm Fiber Cement Board 16 64.25 Pc Metal Furring 17 7.68 Pc Carrying Channels 18 21.50 Pc Hanger Bars/rod 19 129.00 Pc Channel Clip 20 5.12 Pc Wall Angle 21 4,622.81 Pc Rivets 22 221.24 Pc 1" Metal Screw 23 4.00 Sq.m Aluminum Glass Window (sliding) 24 16.17 M Pre-painted Ridge Flashing, Ga 24(0.701mm Thk) 25 4.59 M Pre-painted Gutter, Ga 24 (0.701mm) X 2.44m 26 13.77 Pc 12" X 1" Plain Gi Strap 27 84.44 Sq.m Pre-painted Metal Sheets (rib Type, Long Span, Gauge 26) 28 844.40 Pc Tek Screw/ J-bolts With Washers 29 23.50 Sq.m Glazed Tiles 30 23.50 Bags Tile Grout 31 23.50 Bags Tile Adhesive (25 Kg) 32 221.54 Gal Concrete Neutralizer 33 221.54 Gal Concrete Sealer 34 221.54 Gal Patching Compound 35 221.54 Gal Semi Gloss Latex (two Coat Only) 36 5.28 Gal Red Oxide Primer 37 13.20 Gal Enamel Paint 38 33.00 L Paint Thinner 39 1.32 Gal Tinting Color 40 3.36 Sq.m Wooden Panel Door 41 930.02 Pc 100mm Thk Chb (non-loading Bearing) 42 469.40 Kg Angle Bar (2mm Thk) 43 89.72 Kg Flat Bar (2mm Thk) 44 22.70 Kg Welding Rod 45 9.94 Kg Acetylene 46 19.87 Kg Oxygen 47 291.43 Kg 50mmx100mmx1.5mm Thk Steel Tubular W/primer Paint Finish 48 257.27 Kg Structural Steel Purlins 49 4.00 Pc Octagonal Junction Box Type Gauge #16 50 27.00 Length 25mm Dia. X 3.0m Pvc Pipes 51 3.00 Set Switch (2 Gang) 52 75.00 M 3.5mm Dia. Electric Wire 53 2.00 Set Heavy Duty Duplex Convenience Outlet 54 6.00 Set 6" Dia. Pinligth ***nothing As Follows*** 1 To Specify The Brand Or Trademark And Other Pertinent Date Of Your Product Articles. 2 To Quote The Price Of The Articles Verified And Found Of Your Store. 3 To Deliver The Articles To The Mpw-barmm Ccdeo, Cotabato City Within Ten (10) Calendar Days From The Receipt Of The Purchase Order/contract Agreement. 4 To Submit The Price Quotation Form (pqf) Annex A, At On Or Before 10:00 A.m., February 28, 2025 5 To Accept The Flag Law And Other Laws (foreign Only). 6 To Participate As Bonafide Dealer. 7 This Business Is Duly Licensed And Permitted By The Government. 8 To Submit Your Certificate Of Exclusive Distributorship.

Details: A/r And M/o Honorable Minsiter And Mos Bungalows Under 3/b Sub Division Of B-division Dg. 2024-25. (sh: Misc Wood Work At Bungalow No. 4 Lodhi Estate An Various Bungalows)

Description: Supply And Delivery Of Hanging Scale, Weigh Calibrator, And Wooden Height Board , Medical Supplies And Laboratory Instrument ,municipality Of Capoocan, Leyte