Wood Tenders

Details: Description Republic Of The Philippines Province Of Apayao Municipality Of Conner Local Government Unit Invitation To Bid For; Project Title: Construction Of Multi-purpose Hall At Caglayan, Conner, Apayao Phase Ii Location: Caglayan, Conner, Apayao Project Id: 24mgu-infra-tfb-004 The Local Government Unit Of Conner, Apayao, Through The 20% Development Fund 2024 Intends To Apply The Sum Of Two Million Four Hundred Eighteen Thousand Nine Hundred Forty-nine Pesos And Seventy-seven Centavos Only(2,418,949.77) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Multi-purpose Hall At Caglayan, Conner, Apayao Phase Ii Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Local Government Unit Of Conner, Apayao Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 95 Calendar Days Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 2. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 3. Interested Bidders May Obtain Further Information From Local Government Unit Of Conner, Apayao And Inspect The Bidding Documents At The Address Given Below From Civil Registrar Office. 4. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders At The Office Of The Municipal Civil Registrar On November 15, 2024. {insert If Necessary: And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of P 5,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 5. Bids Must Be Duly Received By The Bac Secretariat In Person At The Office Of Civil Registrar Office On Or Before November 22, 2024 @ 9:00 Am (i) Manual Submission At The Office Address As Indicated Above. Late Bids Shall Not Be Accepted. 6. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 7. Bid Opening Shall Be On November 22, 2024 @ 9:30 Am At The Given Address Below Lgu-premises, Caglayan, Conner, Apayao. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 8. The Local Government Unit Of Conner, Apayao Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 9. Scope Of Work Item No. Description Unit Quantity Spl I Facilities Of Engineer Lumpsum 1.00 B.7 Occupational Safety And Health Program Lumpsum 1.00 B.5 Project Billboards Each 1.00 B.9 Mobilization/demobilization Lumpsum 1.00 900(1) Structural Concrete For Column, Girder/beam (class A, 28 Days) Cu.m. 7.64 902(1) Reinforcing Steel Of Reinforced Concrete Structures For Two To Five Storey (grade 40/ Grade 60) Kgs. 2,047.88 903(2) Formworks And Falseworks Sq.m. 184.90 1046(2)a1 100mm Chb (including Reinforcing Steel) Sq.m. 160.27 1010(2)b Doors (wooden Panel) Sq.m. 9.03 1007 Aluminum Glass Door Sq.m. 8.19 1042(1) Stainless Steel Doors And Frames Sq.m. 9.48 1008 Aluminum Glass Window Sq.m. 31.37 1027(1) Cement Plaster Finish Sq.m. 320.54 1003 Carpentry (roof Framing) Sq.m. 141.70 1003(1)a1 Carpentry (ceiling) Sq.m. 50.40 1014(1)b2 Prepainted Metal Sheets (rib Type, Long Span, Above 0.5mm Sq.m. 130.40 1013(2)a2 Fabricated Metal Roofing Accessory (flashing, Gauge 26) M 12.40 1013(2)b1 Fabricated Metal Roofing Accessory (gutter, Gauge 26) M 12.40 1018(1) Glazed Tiles And Trims Sq.m. 134.68 1018(2) Unglazed Tiles Sq.m. 118.11 1051(1) Railings Lumpsum 1.00 1001(8) Sewer Line Works Lumpsum 1.00 1002(6) Cold Water Line Works Lumpsum 1.00 1002(40) Plumbing Fixtures Lumpsum 1.00 1001(9) Storm Drainage And Downspout Lumpsum 1.00 1101(42) Wires And Wiring Devices Lumpsum 1.00 1100(10) Conduit, Boxes And Fittings Lumpsum 1.00 1102(1) Panel Boards With Main And Branch Maker Lumpsum 1.00 1103(1) Lighting Fixtures And Lamps Lumpsum 1.00 13. For Further Information, Please Refer To: Edmundo B. Desiderio Jr, Ce. Bac Sec Head-infrastructure Office Of The Municipal Engineer Vivian B. Pacis Bac Chairman-infrastructure Office Of The Civil Registrar 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: [philgeps, Local Government Unit Of Conner, Apayao]

Details: Description 120 Pc Ballpen - Black 120 Pc Ballpen - Blue 2 Reams Bond Paper Sub 20 (long) 2 Reams Bond Paper Sub 20 (a4) 25 Pc Folder Long (white) 10 Pc Plastic Envelope (long) 1 Pc Permanent Marker, Black, Fine 2 Pc Permanent Marker, Black, Broad 2 Pc Wyteboard Marker, Black 4 Pc Log/record Book, 300 Leaves 5 Box Staple Wire No.35 4 Pc Scissors Hd 2 Pc Puncher Hd 2 Pc Stamp Pad (big) 1 Pc Tacker 6 Box Tacker Wire Tso 16 Pc Correction Tape 7 Bot Air Sanitizer 8 Bot Air Freshener 22 Pc Battery Aa 10 Pc Battery Aaa 20 Pc Curtain 3ftx6ft (sky Blue) 5 Pc Curtain 8ft (light Pink) 6 Pc Curtain 8ft (cream/ivory) 6 Pc Curtain 8ft (blue) 6 Pc Curtain 8ft (white) 4 Pc Dust Pan (plastic) 100 Pc Medals (medium) 4 Pc Floor Mat (cotton) 10 Pc Photo Frame (long Size) 3 Unit Tornado Mop 5 Pc Soft Broom 2 Pc Stick Broom 2 Pc Garbage Bin With Swing Cover 2 Gallon Alcohol (isoprophyl) 4 Bot Toilet Bowl Cleaner 2 Bot Insect Spray 4 Pc Pillow (20x30) 2 Set Bed Sheet With Pillow Case And Blanket (single) Blue 2 Set Bed Sheet With Pillow Case And Blanket (single) Pink 5 Pc Cheese Cloth Filter (color Beige, Size 150* 150cm Cotton) 4 Packs Polyethylene Plastic Bags (food Grade 8x12 Thickness 002;003;004) 2 Pc Digital Temperature (food Thermometer Model:tp101 Net Wt.45.6g) 2 Set Dissecting Set (secheron 16 Pcs Dissecting Set) 1 Unit Measuring Tape (tolsen Industrial Fiberglass Tape 50 M) 5 Pc Knives (8'' High Carbon Stainless Steal Knife) 2 Pc Digging Blade Hd 10 Pc Mosquito Forceps (mosquito Straight 5") 2 Set Measuring Spoons (setof 6 Stainless Steel) 2 Set Measuring Cups (8 Pcs Stainless Steal) 1 Unit Digital Weighing Scale (10 Kg Digital Kitchen Scale) 4 Roll Tissue Paper 5 Pcs Cutting Board 39cmx26cmx1cm 2 Gallon Dishwashing Liquid 4liters 2 Bottles Hand Soap Not Scented 750ml 3 Pcs Kitchen Apron 2 Pcs Kitchen Scissors 10 Pcs Kitchen Towel/ Dish Cloth 5 Pcs Meter Stick 5 Set Netting Needles 10 Meters Plastic Cover 1mm Thick 3 Pcs Pot Holder/ Cotton Oven Gloves 3 Pc. Stainless Cooking Pot Casserole With Handle 3 Pcs Stainless Food Tray 59cmx39cmx2cm 5 Pcs Stainless Mixing Bowl 2.5 To 3l 2 Pcs Stainless Steel Wire Mesh Strainer 2 Pcs Stainless Steel Colander 24cmx31.5cmx11cm 3 Pcs Stainless Steel Grater/cutter 3 Pcs Stainless Steel Multi- Purpose Tongs 2 Set Triangles Set (30/60) 5 Pcs Utility Basin White 6l 5 Pc Water Dipper White 2 Pcs White Pail With Cover(3 Gallon Capacity) 1 Set Wooden Ladle Set 2 Box Multifunctional Disposable Gloves 1 Set Gas Range With Tank (set) 3 Bottle Disinfectants 2 Pc Magnetic Compass 2 Pc Manual Compass 5 Sacks Urea (46-0-0) 10 Sacks 16-20-0 10 Sacks 21-0-0 5 Pcs Push Brush 5 Gallon Algal Starter 2 Liters Conwey Fertilizer 30 Liters Tmrl Fertilizer 3 Pcs Plastic Basin White 30 Sacks Chicken Dung 20 Sacks Agricultural Lime 15 Kg Teaseed 15 Pcs Bamboo 1 Kg Copper Nail #1 1 Kg Copper Nail #2 1 Roll Mosquito Net 0.5 Roll V-net (black) 20 Pc Certificate Jacket Holder Long 20 Pc Certificate Jacket Holder A4 20 Pc Certificate Jacket Holder Short 20 Pc File Box (navy Blue) 10 Pc File Storage Box With Lid (legal-large Capacity) 10 Packs Photo Paper Premium Glossy A4 10 Packs Sticky Note Small 2x2.25(sign Here) 4 Unit 16" Wall Fan 4 Unit 16" Ceiling Fan 5 Pc Clip Board 24 Pc White Board Marker, Black 2 Bot White Board Marker Ink Black 5 Pc White Board Eraser 24 Pc Brown Envelope Long 5 Box Binder Clip 25mm 5 Box Binder Clip 19mm 5 Box Binder Clip 32mm 3 Box Push Pin 1 Unit 14 Digits Calculator 5 Liters Formaline

Details: Description Invitation To Bid For 25ei0076 - Construction Of Multi-purpose Building (sk Building) At Barangay Poblacion, Mansalay, Oriental Mindoro 1. The Dpwh - Southern Mindoro District Engineering Office, Through Nep 2025 Intends To Apply The Sum Of Php 4,950,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Multi-purpose Building (sk Building) At Barangay Poblacion, Mansalay, Oriental Mindoro /25ei0076. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh - Southern Mindoro District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Multi-purpose Building (sk Building) At Barangay Poblacion, Mansalay, Oriental Mindoro Contract Id No. : 25ei0076 Locations : Mansalay, Oriental Mindoro Scope Of Works : Construction Of 1-unit Two (2) Storey Multi-purpose Building (sk Building) At Barangay Poblacion, Mansalay. This Includes Earthworks, Reinforced Concrete Wokrs, Finishing And Other Civil Works Such As Termite Control Works, Such As Termite Control Works, Storm Drainage And Sewerage System, Plumbing Works, Installation Od Ceilings, Installation Of Steel Doors And Frames, Aluminum Glass Door And Windows, Wooden Doors, Waterproofing, Installation Of Glazed Tiles And Unglazed Tiles, Plastering, Masonry Painting, Masonry Works, Installation Of Stainless Railings (ramp) And Electrical Works. Approved Budget For The Contract : Php 4,950,000 Contract Duration : 180 Calendar Days 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D, B, A, Aa, Aaa For General Engineering. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Dpwh - Southern Mindoro District Engineering Office And Inspect The Bidding Documents At Dangay, Roxas, Oriental Mindoro During Weekdays From 8:00 A.m. – 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 11, 2024 - December 03, 2024 Until 10:00 A.m. From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 5,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh - Southern Mindoro District Engineering Office Will Hold A Pre-bid Conference On November 19, 2024 At 8:30 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_southernmindoro@dpwh.gov.ph For Electronic Submission On Or Before December 03, 2024 Until 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On December 03, 2024 @ 10:30 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh - Southern Mindoro District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Engr. Aleli Olly U. Manalaysay Head, Procurement Unit, E-iii Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Emmanuel A. Manalaysay Bac Chairperson Assistant District Engineer Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Approved: Emmanuel A. Manalaysay Bac Chairperson

Details: Description Item No. Item & Description Quantity Unit Concrete & Masonry Works 1 Porland Cement Type 1 185 Bags 2 Washed Sand 16 Cu.m. 3 Gravel 3/4" 7 Cu.m. 4 16mm X 6.0m Rsb (grade 40) 37 Pcs 5 10mm X 6.0m Rsb (grade 33) 200 Pcs 6 12mm X 6.0m Rsb (grade 33) 130 Pcs 7 # 16 Tie Wire 39 Kls 8 Chb #4 1726 Pcs 9 Coco Lumber 2" X 2" X 10" 30 Pcs 10 Coco Lumber 2" X 3" X 10" 40 Pcs 11 Cw Nails 4" 6 Kls 12 Cw Nails 2-1/2" 4 Kls 13 Cw Nails 1" 3 Kls 14 Nylon String 3 Roll 15 1/2" X 4" X 8" Marine Plywood 6 Roll 16 Bamboe Poles 30 Pcs 17 Plastic Binders 2 Rolls Steel Works & Roofing Works 18 Welding Rod 80 Kls 19 1.2mm X 2" X 3" C-purlins 32 Pcs 20 3/16" X 1" X 1" Angle Bar 14 Pcs 21 3/16" X 1" Flat Bar 23 Pcs 22 1/4" X 3" X 3" Angle Bar 16 Pcs 23 3/16" X 2" X 2" Angle Bar 13 Pcs 24 Prepainted Long Span Roofing 0.4mm X 9.4m (blue) 12 Pcs 25 Pre-painted Fascia Cover (white) 18 Pcs 26 Pre-painted End Flashing (blue) 10 Pcs 27 Tekscrew 2" 900 Pcs 28 Tek Screw Adaptor 6 Pcs 29 Steel Brush 3 Pcs 30 Epoxy Metal Primer (gray) 6 Pcs 31 Epoxy Reducer 2 Pcs 32 Cut Off Disc 14" 5 Pcs 33 Cutting Disc 4" 20 Pcs Painting Works 34 Flat Wall Latex 11 Gal 35 Semi Gloss Latex 22 Gal 36 Skim Coat 8 Bag 37 Sand Paper 50 Pcs 38 Pain Brush 2 1/2" 4 Pcs 39 Baby Rollers W/pan 4 Pcs Doors And Windows 40 Loose Pin Hinges 2" X 4" 2 Pcs 41 Door Knob Heavy Duty 3 Pcs 42 0.6m X 2.1m Pvc Door With Louver 1 Set 43 0.9m X 2.1m Wooden Panel Door With W/2" X 5" Door Jamb 2 Set 44 1/4" Thk Glass Sliding Window On Aluminum Frame 143 Sqft Tile Works (2nd Floor) 45 60cm X 60cm Glazed Tiles (multi Purpose Area & Office 148 Pcs 46 60cm X 60cm Glazed Tiles (wall) 16 Pcs 47 60cm X 60cm Non-skid Tiles (cr Floor) 8 Pcs 48 Tiles Adhesive 11 Bag 49 Grout 5 Kls Electrical Works 50 Panel Board (60a-main, 1-20a, 3-30a) 1 Set 51 Flexible Hose 3/4 1 Roll 52 Led 12w Watts Bulb W/ Receptacle 6 Pcs 53 2.0mm² Tth Wire 1 Roll 54 3.5mm² Tth Wire 1 Roll 55 5.5mm² Tth Wire 40 I.m. 56 8.0mm² Tth Wire 40 I.m. 57 Electrical Tape (big) 3 Rolls 58 Double Conv. Outlet (flush Type) 4 Pcs 59 1-gang Switch (flush Type) 3 Pcs 60 2-gang Switch (flush Type) 1 Pcs 61 Junction Box 4" X 4" W/ Cover 6 Pcs 62 Utility Box 2" X 4" Pvc 8 Pcs 63 1/2" Pvc Electrical Conduit Elbow (orange) 10 Pcs 64 1/2" Pvc Electrical Pipe (orange) 15 Pcs Plumbing Works 65 Water Closet W/ Fittings 1 Set 66 Lavatory W/ Fittings 1 Set 67 Stainless Floor Drain 4" X 4" 1 Pcs 68 4" Pvc Pipe S-900 5 Pcs 69 4" Pvc Elbow 90° 4 Pcs 70 4" Pvc Elbow 45° 3 Pcs 71 4" Pvc Wye 1 Pcs 72 4" Pvc Tee 8 Pcs 73 4" Pvc Clean Out 2 Pcs 74 2" Pvc Pipe S-900 5 Pcs 75 2" Pvc Elbow 90° 4 Pcs 76 2" Pvc Tee 5 Pcs 77 2" Pvc Wye 3 Pcs 78 2" Pvc P-trap 1 Pcs 79 1/2" Diameter Pvc Blue 8 Pcs 80 1/2" Pvc Ball Valve 1 Pcs 81 1/2" Pvc Elbow 90° 5 Pcs 82 1/2" Pvc Tee 12 Pcs 83 Solvent Cement 400cc 2 Cans 84 Teflon Tape 3 Pcs

Details: Description Invitation To Bid For The Supply And Delivery Of Various Administrative Facilities And Equipment For Nfa Region Ix For The Year 2024 (rebid) 1. The National Food Authority Region Ix, Through Its Corporate Operating Budget For 2024, Intends To Apply The Sum Of One Million One Hundred Twenty Five Thousand Six Hundred Twenty Three (php1,125,623.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Supply And Delivery Of Various Administrative Facilities And Equipment For Nfa Region Ix For The Year 2024 (rebid) /project Reference Nfa-rbac-ix-2024-goods-j-06. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Lot No. Description Qty Approved Budget For The Contract (abc) - Php 2 Digital Camera 1 Unit 63,598.00 3 Bundy Clock (biometric Attendance Machine) 2 Units 63,400.00 4 Conference Audio System 1 Set 437,095.00 Office Cubicles 12 Units 5 Television Set – 75 Inches 1 Unit 122,499.00 6 Water Storage Tank (with Installation) 1 Unit 118,713.00 7 Bed & Wooden Cabinet Sets 10 Sets 259,900.00 8 Document Scanner 1 Unit 60,418.00 Total – Approved Budget For The Contract (abc) 1,125,623.00 2. The National Food Authority Region Ix Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within The Last Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The National Food Authority Region Ix And Inspect The Bidding Documents At The Address Given Below During Working Days From 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 06, 2024 To November 26, 2024, Weekdays Only From 8:00am To 5:00pm And November 27, 2024 From 8:00am To 9:30am From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Nfa Website, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Nfa Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means. Lot No. Approved Budget For The Contract Bidding Documents Fee (php) 2 63,598.00 500.00 3 63,400.00 500.00 4 437,095.00 500.00 5 122,499.00 500.00 6 118,713.00 500.00 7 259,900.00 500.00 8 60,418.00 500.00 6. The National Food Authority – Region Ix Will Hold A Pre-bid Conference Scheduled On November 14, 2024 At 09:30 A.m. At Nfa Regional Office Ix Atrium, San Roque, Zamboanga City Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Address Below On Or Before November 27, 2024 At 9:30 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On November 27, 2024 After The Set Deadline For Submission Of Bid Documents At Nfa Regional Office Ix Atrium, San Roque, Zamboanga City. Bids Will Be Opened In The Presence Of The Bidder Or Their Duly Authorized Representatives Who Choose To Attend The Activity. 10. The National Food Authority Region Ix Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Malou Kareen G. Sarenas Chairperson, Rbac Secretariat National Food Authority Regional Office Ix Tiguma, Pagadian City Tel. No. (062) 991-1828/ (065) 215-2021 Email: Bac.region9@nfa.gov.ph 12. You May Visit The Following Websites: For Downloading The Bidding Documents: Https://nfa.gov.ph/announcement/bids-and-auction Https://philgeps.gov.ph/ Date Of Publication: November 6, 2024 Joann B. Bernardo Oic-branch Manager And Rbac Chairperson, Nfa Region Ix

Details: Description 1. 10 Rolls Plastic Mulch 1.2m (4ft.) X 400m, Black Or Silver Black, Heavy Duty 2. 10 Rolls Plant Nets Width 4ft X 30 Yards/roll 3. 20 Rolls Uv Plastic Sheet Heavy Duty 6 Mill/150 Microns 10ftx50ft. 4. 10 Rolls Uv Plastic Sheet Heavy Duty 8 Mil/200 Microns 10ftx 50 Meters Long 5. 200 Rolls Green House Film Foil, Greenhouse Outdoor Cover Plastic Sheet 9ft.width, 1 Meter Length 150 Microns, Polyethylene Material, Light Blue 2 Or 2.5 Meters Wide, Uv Resistant Package Content: 1 X Greenhouse Film Without Bracket. 6. 50 Pcs. Bracket Greenhouse 7. 15 Rolls Trellis Net 3x 11 Meters 8. 5 Rolls Black Nylon Shade Garden Greenhouse 8ft X 30m 9. 25 Pcs. Tunnel Hoop Household Garden Tool Plant Hoop Grow Frame Bandle 10. 10 Rolls Insect Net Fine Screen Nets 10ft/yard 11. 4 Rolls Greenhouse Film Foil Pet Greenhouse Outdoor Living Plant Cover Plastic Sheet Tunnel 2.5 Wide 12. 20 Pcs. Bolo 13. 20 Pcs. Pala/shovel 14. 20 Pcs. Garden Rake 15. 20 Pcs. Piko ( Wooden Handle Pick/tick Mattoks) 16. 4 Packs Seedling Try 100 Pcs.each Pack (100 Holes) 17. 10 Sacks Cocopeat Invitation To Bid For Supply And Delivery Of Farm Tools And Equipment’s 1. The Local Government Unit Of San Isidro, Northern Samar, Through The General Fund Intends To Apply The Sum Of Two Hundred Forty Two Thousand Five Hundred Eighty Pesos Only. (php242,580.00) Being The Abc To Payments Under The Contract For Supply And Delivery Of Farm Tools And Equipment’s . Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. The Local Government Unit Of San Isidro, Northern Samar Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required 30 Calendar Days. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 2. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 3. Prospective Bidders May Obtain Further Information From Local Government Unit Of San Isidro, Northern Samar And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 To 12:00 In The Morning And 1:00 To 5:00 In The Afternoon. 4. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders During Office Hours From November 09, 2024 Until 9:00 A.m. Of December 02, 2024 From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of P500.00. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 5. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before Nine O’clock In The Morning (9:00 Am) Of December 02, 2024 At The Bids And Awards Committee, 2nd Floor, Municipal Building, Poblacion Sur, San Isidro, Northern Samar. All Bids Must Be Accompanied By The Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. Bidder’s Representative May Likewise Acquire The Bidding Documents Upon Presentation Of The Following Documents And Proof That The Bidder Have Ordered The Bidding Documents In The Philgeps (included In The Drl), To Wit: A. Duly Notarized Special Power Of Attorney/authorization Letter; B. Photocopy Of The Authorizing Officer’s Identification Card (id); C. Photocopy Of Representative’s Identification Card (id). 6. Bid Opening Shall Be On Nine O’clock In The Morning (9:00 Am) Of December 02, 2024 At 3rd Floor, Conference Room, Municipal Building, Poblacion Sur, San Isidro, Northern Samar. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 7. The Local Government Unit Of San Isidro, Northern Samar Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 8. For Further Information, Please Refer To: Diana C. Balunan Bac Secretariat Bids And Awards Committee G/f Municipal Building, Poblacion Sur, 6409 San Isidro,northern Samar Contact No. 09533855113 Email Address: Bac.sanisidro@gmail.com 9. You May Visit The Following Websites: 10. For Downloading Of Bidding Documents: Https://philgeps.gov.ph Https://sanisidro-nsamar.gov.ph [november 09, 2024] John M. Puayap Mpdc/gso Designate/bac Chairperson

Details: Works: Pavillon Des Sessions Project - Redesign of the reception area of the Porte des Lions of the Louvre Museum - Lots No. 01 to 04. Lot 01 - Site installation, Demolition-structural work, Masonry of small elements, Partitions, Linings, Natural stone & Terrazzo, Tiling, Staff, Paintings, Flexible flooring. Lot 02 - Wood and metalwork joinery and fine locksmithing. Lot 03 - High and low currents. Lot 04 - Plumbing and ventilation.

Details: The Subject of This Contract is the Redevelopment Work of Premises Located on Level R+1 Wing A1 (Blue) of the Faculty of Medical and Paramedical Sciences on the University Campus of La Timone. Each Lot Constitutes a Contract: Lot 1: Demolition – Partitions – False Ceilings – Flexible Floors – Painting Lot 2: Wood Joinery – Concealments Lot 3: Electricity Cfo - Cfa Lot 4: Heating – Ventilation – Cooling – Plumbing

Details: Description 1. The Municipality Of Esperanza, Masbate Through The Dole Region V Fund Intends To Apply The Sum Of One Million Eight Hundred Sixty-two Thousand Four Hundred Forty-three Pesos And 60/100 Only (₱1,862,443.60) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Supply And Delivery Of Materials, Supplies And Equipment For The Provision Of Livelihood Opportunities To Parents Of Child Laborers In The Municipality Of Esperanza, With Project Reference Number (prn) Of Esperanza-gds-2024-11-29. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipality Of Esperanza, Masbate Now Invites Bids For The Supply And Delivery Of Materials, Supplies And Equipment For The Provision Of Livelihood Opportunities To Parents Of Child Laborers In The Municipality Of Esperanza, With Project Reference Number (prn) Of Esperanza-gds-2024-11-29, With The Following Specifications: Item No. Qty. Unit Description Carpentry 3 Pieces 1. Claw Hammer, Head Weight;160z; Overall Weight;170z-23oz; Forged Steel Head; Smooth Face; Fiberglass 2 Units 2. Angle Grinder, Portable, 4 'capacity, 220-240v/60hz., 710 Watts, With Side Handle Grips, Angle Grinder Guard, Power Plug: Us Type 3 Units 3. Circular Saw, Voltage; 220-240v-frequency 50/60hz Input Power: 1400w No-load Speed; 4800rpm Blade Diameter; 185mm Cutting Capacity;45 Degree: 44mm 90 Degree;65 Mm Maximum Cutting Depth: At Least 90 Degree 62mm, Weight Maximum 5.2kg; Item Approx. Dimension 15-17cm, 25-28cm, 30-35cm 3 Sets 4. Combination Wrench, 16pcs, (6mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm 21mm, 22mm, 24mm, 27mm, 30mm, 32mm), Drop Forged Alloy Or Chrome Vanadium Steel Construction, Lobular Box End Design 2 Pieces 5. Crow Bar, 36 'long; Length Tolerance; - 1/8 Forged Steel Carbon 3 Units 6. Electric Grinder Continuous Rating Input; 850w Wheel Diameter: 100mm (4" Inch) No Load Speed: 11,000r/min Dimension (lxwxh): 273x118x101mm (10/34x4-5/8x4") Net Weight: 1.8 Kg(4.0lbs.) Power Supply Cord: 2.0m 6.6ft.) 3 Units 7. Electric Planer Rated Input Power: 650w Planing Width; 82mm Cutting Depth: 0-2.6mm Weight:2.8kg Adjustable Rebating Depth: 0-9mm No-load Speed: 16,500rpm Dimension: 158mmx20mmx140mm Powerful Planer With Max. 2.6mm Cutting Depth Powerful 650 W Motor 3 Pieces 8. Portable Jig Saw, Input Power; 600-850w; Power Voltage: 220-240v; Frequency: 60hz; Adjustable Blade Angle Up To 45 Degrees; Cord Length: 1 Meter; Plus Type; Us Type; With Variable Speed Setting; Top Handle With Quick Release Blade 3 Sets 9. Wood Chisel; 4-pcs. Set(6mm;12mm;19mm;25mm) Tempered Chrome Carbon Steel Blade, Hardened Shank; Rust-resistant, Lacquered Coated Blade; Bi-material Handle 1 Unit 10. Electric Router Large Plunge Capacity 0-65mm (0-2-3/8") Continuous Rating Input:1,600wm Cap.: Collet: 1/2"m Plunge Capacity:0 - 65mm (0 - 2-9/16")m Base Dia.:160mm (6-1/4") No Load Speed (rpm):23,000/min Height:287mm (11-1/4" 1 Piece 11. L-square Ruler; Material : Stainless Steel Measure Length :10 / 25cm;ruler Size :10 X 4.5(l*w) / 25.3cm X 11.4cm(l*w) Weight :102.4g 1 Piece 12. Meter Tape With Magnetic Hook, Blade Material: Nylon Coated Blade: Dimension 16ft. (l) X 25mm (w) Dried Fish Making/vending 2 Rolls 1. Net For Fish Drying 1 Roll = Approx30meters For Every 1meter Measurement: Width 2.5meters (105inches) X Length 1meter (39inches) Nylon Mesh Any Color 1 Piece 2. Basin, 22 Inch, Plastic Material, 1" Thickness 1 Piece 3. Boning Knife, 27.3cm, Blade Length:14.6cm, Blade Thickness: 4mm, Wood Handle 1 Piece 4. Cleaver Knife, 11" Stainless Steel, Weight: 310-340g, Blade Size: 6.5 Inches 1 Piece 5. Cutting Board, 38x25cm Marble, Double Sided 1 Piece 6. Fish Drying Rack, 4-layer, 45x45x66cm, Foldable 1 Piece 7. Fish Scaler, 20cm Stainless Steel 1 Piece 8. Fish Scraping Tool, 20cm Stainless Steel 1 Piece 9. Kitchen Scissors, Material: Stainless Steel And Plastic Silicone, Size: 22.5x7.3x1.2cm 6 Pieces 10. Styro Box / Big / Size : (l) 22” X (w) 15 “ X (h) 17” 1 Pack 11. Vacuum Bag / Vacuum Pouch /vacuum Sealer | Bpa Free, Commercial Grade For Food Storage & Sauce, 100pcs Each Pack 15 X 20cm 1 Pack 12. Vacuum Bag / Vacuum Pouch /vacuum Sealer | Bpa Free, Commercial Grade For Food Storage & Sauce, 100pcs Each Pack 17 X 25cm 1 Pack 13. Vacuum Bag / Vacuum Pouch /vacuum Sealer | Bpa Free, Commercial Grade For Food Storage & Sauce, 100pcs Each Pack 20 X 30cm 1 Pack 14. Vacuum Bag / Vacuum Pouch /vacuum Sealer | Bpa Free, Commercial Grade For Food Storage & Sauce, 100pcs Each Pack 25 X 35cm 1 Unit 15. Vacuum Sealing Machine, Size: 35 Cm * 14.7 Cm * 6.7 Cm, Color: White Weight: 1.2kg, Material: Abs Material, Accessories: Machine *1, Rated Voltage: 220v, Rated Frequency: 50hz, Rated Power: 110w, Vacuum: -65kpa, Vacuum Sealing Time: 10-25s, Single Sealing Time: 6-17s 1 Unit 16. Weighing Scale: Analog; 20kg Capacity; Approx. Dimensions: 6-7" (l); 8-9" (w); 10-11" (h); Dual Unit (kg And Pounds) Fishing 21 Pieces 1. Banka With Marine Engine (banka Fiberglass With 17ft. Long Katig, L-15ft., Wide-2ft.,depth-2ft.) Gasoline Marine Engine 4-stroke Model: Se 75m Max. Hp 7.5hp, Displacement: 212cc Max Rpm: 3600 (please See Attached Photo Design) 2 Units 2. Diesel Marine Engine 12hp Type: Single Cylinder, Vertical, Air Cooled, 4 Stroke, Direct Injection Bore & Stroke: 86*72 Displacement: .418l Compression Ratio: 19 Horsepower. 12hp Rotation Speed: 3600 Rpm Starting System: Marine Pulley Fuel Tank Capacity: 5.5liters Lube Oil: Sae 10w-30, 15w-40 Lube Oil Capacity: 1.65liters Dimension:420*440*49 2 Bundles 3. Pamo #4 2,000 Pieces 4. Pataw # 3 1 Piece 5. Stainless Steel Round Bar Shafting 1" X 1 Meter Length 9 Bundles 6. Lambat Nylon #4 .25(1000 Mtrs. Is Equal To 1 Bundle) 10 Bundles 7. Lambat Nylon #7 .25(1000 Mtrs. Is Equal To 1 Bundle) 12 Rolls 8. Pisi #7 30 Kilograms 9. Tingga Pahaba 1 Bundle 10. Lambat Nylon #6 .25(1000 Mtrs. Is Equal To 1 Bndle) 12 Kilograms 11. Nylon #130 4 Kilograms 12. Nylon #140 2 Bundles Pamo Fishing Net #25 Food Vending 19 Pieces 1. Caldero Cast Iron 48cmx42cm Depth X Diameter 20 Liters Double Handle 0.5cm Thickness 17 Sets 2. Casserole (5pcs Aluminum) 16,18,20,22,24cm 10 Pieces 3. Food Glass Stand, With Aluminum Frame Glass And Screen Sliding Door (18x 20 X 36cm) 2 Layers 16 Pieces 4. Food Tong (12 Inches ( 29 X 4.6cm ) Stainless Steel) 15 Pieces 5. Kawa Cast Iron 45 Cm X 10" Depth 20 Pieces 6. Kawali Cast Iron Up To Handle 5 28.5cm X High 7.3cm 17 Sets 7. Knife Set Material: Stainless Steel 6.5’’cleaver 8’’chef Knife 8’’slicer Knife 5’’utility Knife 3.5’’fring Knife 1pc Scissor 21 Sets 8. Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device; Safety Push Protection For Leakage; Gas Auto Safe Controller; Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp 16 Pieces 9. Sandok Size 3 - 12 Inches Stainless Steel 21 Units 10. Stove Double Burner (automatic Ignition Powerful Flame Controller, Stainless Steel Body, (weight:3.43kg) 710x390x145mm) 12 Pieces 11. Strainer Stainless Steel 28cm 4 Sets 12. Monobloc Plastic Table And Chair Set (6 Seaters) Table Size: 30*48 In Green 1 Piece 13. Basin, 22 Inch, Plastic Material, 1" Thickness 90 Pieces 14. Food Tray Stainless Steel W/ Glass Cover (h - 7cm, W - 26cm, L - 33cm) 4 Pieces 15. Chopping Board Diameter 30cm Size: 36x45x2 11 Pieces 16. Palamig/ Juice Dispenser, Acrylic With Free Plastic Ladle 12liters, 9x16 Inches 8 Pieces 17. Pressure Cooker, Food Grade Aluminum Alloy, 19cm-height, 18cm-handle Length With Rubber, 20cm Diameter 15 Sets 18. Steamer Stainless Steel With Heat Resistant Handle 5 Layers (height:l 17.2cm,diameter:25.7cm) 5 Units 19. Blender, 5-6 Cups (1.25l To 1.5l) Heat Resistant Glass Jars, 450watts Motor, 220v-250w, 10-speed Push Button; With Pulse Option For Precise Blending, Power Plug: Us Type 6 Pieces 20. Mixing Bowl Medium, Diameter:28cm, Height:11.2cm, Stainless 4 Pieces 21. Baking Sheet / Tray, Stainless Steel Plain Food Serving Tray Baking Sheet Pan Rectangle 4.8cm Deep 27x20x4.8cm 2 Units 22. Baking Electric 4-layer Oven 220v, 50*30*40cm, 8kg, Digital Control, Digital Display, Easy Cleaning, Mechanical Control, Timer 48l Large Capaciy 1 Set 23. Lpg 11kg W/ 1.5m Hose And Full Valve Regulator, With 2pcs Hose Clamp (complete Set) 2 Pieces 24. Measuring Cups (set For Dry), 8pcs. Slique Stackable Compact Measuring, Stainless 2 Units 25. Rice Grinder Voltage: 220v 50-60hz Motor Power: 2.2 Kw Motor Speed: 1400 R/min. Production Particle Size: 25-100 Mesh Size: 65x25.5x74.5cm Weight: 30kg Motor: Copper Core 150 Steel Mill Model: Powder 70kg/h Slurry 60kg/h 1 Unit 26. Nego Kart With Bicycle W/ Gas Stove Burner Hole Nego Kart Specification: Roofing: Polycarbonated Roof (170x117x30.5cm); Angle Bar Steel Framing (welded); Blind Rivets Body (cart): Tubular Steel Framing (welded); Stainless Steel Sheet As Top Cover (130x75cm); 2 (70x55cm) Folding Ledges W/ Stainless Steel Sheet Supported By Round Tube Steel Pipe About 2mm, 1 (130x20cm) Fixed Front Ledge With Stainless Steel; Blind Rivets; Plain G.i Sheet On Internal Flooring Supported By 5mm Flat Bar Iron And Steel Bar Iron; Body Covered By Plain Gi Sheet; Fully Painted Internally & External Color Blue; Hole: Gas Stove Burner (600mm Dia, 150mm Depth); With 1 Side Wheel: Tire Size (20" X 2.125 Jumbo), Interior Tube (20" X 2.125); With Entire Front Weatherproof Sticker Logo Of Dole And Dilp & Tourism Spot Bicycle Specifications: Bmx Type Bike Frame Front And Rear Free Wheel Hub For Rim Set Single Speed Tread Type (wheel Set), Tire Size (20" X 2.125 Jumbo), Interior Tube (20" X 2.125) Bmx Handlebar, Bmx Fork, Head Parts (h Post, Handle Grip), Chain (single Speed), Pedal (bearing Type), Seat Clamp, Saddle With Spring, Foot Brake (clamp With Spring), Crank Pedals (175mm-180mm Cracks)." 2 Pieces 27. Spatula (big), 1pc. Heat Resistant Silicone 1 Unit 28. Stove, Stove Type: Gas, Number Of Burners:3, Input Voltage:240v, Power Consumption:500w, Weight:7kg, Dimension (l X W X H): 56cm X 26cm X 9.5cm Heavy Duty 6 Pieces 29. Sandok: Length: 27cm, Width Of Scooper: 7cm Stainless Steel 1 Piece 30. Barbeque Grill Folding Thick Stainless Steel - Size: (l)60cm X (h)22cm X (w)33cm Black Color 1 Unit 31. Weighing Scale: Analog; 20kg Capacity; Approx. Dimensions: 6-7" (l); 8-9" (w); 10-11" (h); Dual Unit (kg And Pounds) 2 Pieces 32. Syanse Size 3 - 12 Inches Stainless Steel 1 Piece 33. Frying Tongs: Materials: Stainless Steel With Rubber Or Plastic Coated Handles; 12 Inch Long 1 Unit 34. Coconut Grinder (hxlxw) 15cm X 16.5cm X 13cm, 1/2", 220v/60hz/1.1a, 370w, 3470rpm Welding 1 Pair 1. Angle Grinder Cutting Discs, 4", 107x16mm 1 Unit 2. Angle Grinder, Portable, 4" Capacity, 220-240v/60hz, 710 Watts, With Side Handle Grips, Angle Grinder Guard, Power Plug: Us Type 1 Piece 3. Ball Pein Hammer, Weight: 16oz/450g, Drop-forged Hammerhead, Heat Treatment, 45 Carbon Steel, Fiberglass Handle 1 Piece 4. C Clamp, Alloy Steel, Size- 6", Depth- 40mm, Max Clamp- 23mm, Body Width- 75mm, Jaw Length- 17mm, Jaw Width- 21mm, T Length- 178mm, Weight- 196 1 Piece 5. Chipping Hammer, 290mm Chisel And Point Hammer With Spring Handle, 300g 1 Piece 6. Gloves, Rubber Material, 16" Or 43cm 1 Piece 7. Hammer (maso), 2lbs Double-faced Steel Head With Rubberized Handle, 29.5cm Long 1 Piece 8. Metal File, 6pcs File/set, Diameter- 3mm, Size- 140mm (5.5") 1 Unit 9. Portable Welding Machine, 2 In 1 Inverter Welding Machine 200 Apms, 220-240v, 60hz, 1pc Tig Torch Set, 1 Pc Electrode Holder, 1 Pc Ground Clamp, Duty Cycle 60% Or Higher, Power Plug: Us Type B 1 Piece 10. Sheet Metal Gauge, Metal, 72x25mm 1 Piece 11. Speed Square,6" Triangular Ruler, Aluminum Alloy, 180mm, 255mmspeed Square 1 Pair 12. Welding Boots, Leather Material, Heel Height: Low (1cm-3cm), Boot Height: Knee-high 1 Piece 13. Welding Helmet, Auto Darkening Helmet, Power Supply: Battery And Solar Powered, Light Shade:din9-13, Dark Shade: Din4, Way To Shift Dark State: Outer Control Stepless Shift, Switching Time: 1/25000s, Delay Time: 0.1-0.8s, Sensitivity Adjustment: Stepless Control, Delay Adjustment: Stepless Control, Operation Temperature: -5 Degrees- 55 Degrees, Active Viewing Area 93mmx43mm, Active Viewing Area Size: (+/- 10mm) 1 Set 14. Welding Magnets, 6pcs/set (2 X 75lb) (2 X 50lb) (2 X 25 Lb) 1 Piece 15. Welding Pliers, 210mm, L-220mm, H- 11mm, W- 55mm 1 Piece 16. Welding Rod Holder, Upper Iron, Lower Brass (300 Amp Capacity) 2.0 - 6.35mm (5/64"-1/4") Length- 250mm 10 Kilograms 17. Welding Rod, 2.0mmx300mm (5/64"x12") Delivery Of The Goods Is Required To Be Delivered For A Period Of Fifteen (15) Days From Receipt Of Ntp. Bidders Should Have Completed, Within Twenty-six (26) Calendar Days From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Municipality Of Esperanza, Masbate And Inspect The Bidding Documents At The Address Given Below During 8:00am To 5:00pm Philippine Standard Time (pst). 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 2, 2024 To December 16, 2024 During 8:00am To 5:00pm Pst From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (₱5,000.00). 6. The Municipality Of Esperanza, Masbate Will Hold A Pre-bid Conference On The Aforementioned Procurement On December 2, 2024 At 10:00am Pst At The Conference Hall, 3rd Floor, Municipal Building, Poblacion, Esperanza, Masbate. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below Before December 16, 2024 At 2:00pm Pst. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On December 16, 2024 At 2:00pm Pst At The Conference Hall, 3rd Floor, Municipal Building, Poblacion, Esperanza, Masbate. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. The Municipality Of Esperanza, Masbate Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.

Details: Description Supply And Delivery Of Goods: Common Use Supplies And Equipment (cse) For Dti8ro For The 4th Quarter Item No. Qty Unit Particulars 1 30 Pc Battery, Size Aa; Alkaline 2 5 Can Car Scent Freshener, Scented, Non-refillable 3 10 Pc Certificate Frame, Wooden Frame With Glass, Letter Size 4 2 Pc Certificate Pen, Black 5 10 Bot Cleaner, Toilet Bowl & Urinal, 500 Ml. Cap 6 5 Jar Cleanser, Powder, 350 Gms 7 3 Box Clip, Backfold, 1.25" (32mm) 8 5 Box Clip, Backfold, 2'' (50mm), 12's/box 9 13 Pc Correction Tape, W/ Dispenser, Good Quality 10 15 Pack Detergent Powder, 500gms 11 26 Bot Dishwashing Liquid, 250 Ml. 12 12 Pc Doormat, 52cm X 34cm,fabric, Rectangular 13 2 Box Envelope, Expanding, Brown, Kraftboard, For Legal Size Doc , 100pcs/box 14 2 Pack Film, Transparency, Ordinary, A4,100/sheets 15 2 Pack Film, Transparency, Ordinary, Letter Size,100/sheets 16 50 Pc Folder, Expanding, Long W/o Tab,green Color 17 1 Pack Folder, Ordinary, File, Tagboard, 14 Points, For Legal Size Papers,white 18 130 Pc Folder, L-type, A4 Size 19 20 Pc Frame, Plastic, A4,black 20 10 Pairs Gloves, Rubber Knitted,for Cleaning, Black Color 21 5 Pc Glue, Water Soluble, 50ml. 22 10 Pc Glue Sticks, All Purpose, 22 Grams 23 10 Can Insecticide, Aerosol Type, 600ml.can 24 5 Bot Ink Cartridge, Epson L210 Ciss Refill, Black T6641 25 9 Bot Liquid Hand Soap, 500ml. 26 1 Pack Microfiber Synthetic Chamois Clean Towel , For Car Cleaning 27 24 Pack Mothballs, Insect Repellent Deodorizing Ball 28 1 Pack Morroco Board Paper, Letter Size, Blue, 100's Per Pack 29 10 Pc Notebook, Stenographers, Gsp Bond, 40 Leaves, Ruled, Spiral Bound, 55gsm 30 100 Ream Paper, Book, For Ppc, A4, Gsm 70 31 5 Ream Paper, Book, For Ppc, Legal, Gsm 70 32 5 Box Paper Fastener, Non-rust Metal 33 10 Pack Paper Towel,two Ply X 70 Pulls - 140 Sheets, 275x230mm 34 24 Pc Pen, Ballpoint, Black 35 12 Pc Pen, Ballpoint, Blue 36 5 Pc Pen, Fluorescent, Assorted Colors 37 6 Pc Pen, Marking, Broad Type, Permanent, Black 38 18 Pc Pen, Marking, Broad Type, Permanent, Blue 39 12 Pc Pen, Marking, Felt Tip, Medium Point, Permanent, Blue 40 12 Pc Pen, Marking, Felt Tip, Medium Point, Permanent, Red 41 60 Pc Pen, Sign Pen, High Tech Pen, Black 42 60 Pc Pen, Sign Pen, High Tech Pen, Blue 43 12 Pc Pen, Sign Pen, High Tech Pen, Red 44 12 Pc Pen, Sign Pen, 0.7 High Tech Pen, Black 45 24 Pc Pen, Sign Pen,0.7 High Tech Pen, Blue 46 18 Bot Refill, Brother Dcp-t 710w Refill, Black Btd60bk 47 12 Bot Refill, Brother Dcp-t 710w Refill, Cyan Btd5000c 48 12 Bot Refill, Brother Dcp-t 710w Refill, Magenta Btd5000m 49 12 Bot Refill, Brother Dcp-t 710w Refill, Yellow Btd500y 50 4 Bot Refill, Epson L3110 Ciss Refill, Black 003 51 1 Bot Refill, Epson L3110 Ciss Refill, Cyan 003 52 1 Bot Refill, Epson L3110 Ciss Refill, Magenta 003 53 1 Bot Refill, Epson L3110 Ciss Refill, Yellow 003 54 17 Pc Ring Binder, 24mm X 1.12mm (1" X 44"), Plastic, Blue 55 5 Pc Ring Binder, 12mm X 1.12mm (1/2" X 44"), Plastic,black 56 5 Pc Ring Binder, 19mm X 1.12mm (3/4" X 44"), Plastic, Black 57 1 Can Stain Remover,ani-bac Dirt And Stain Cleaner,250 Grams 58 1 Pc Stapler For No. 35 Staple Wire ,with Staple Remover 59 2 Box Staple Wire, No. 35 60 2 Pack Sticker Paper, A4 Size 61 15 Pad Stick On Pad, 2" X 3" (51mm X 76mm), Assorted Colors 62 5 Pad Stick On Pad, 3" X 3" (76mm X 76mm), Assorted Colors 63 15 Pad Stick On Pad, 4" X 4" , Assorted Colors 64 10 Box Tissue Paper, Facial, Unscented 65 83 Pc Toilet Deodorant Cake 66 2 Pc Toilet Brush,plastic,with Holder, Heavy Duty Brush 67 10 Roll Transparent Tape, 1 Inch X 100m 68 500 Pc Vellum Board,a4 Size,pale White,180 Gsm Note: Bidder / Supplier Must Submit Valid Documents On: 1. Philgeps Registration Number 2. Lgu Business Permit And 3. Omnibus Sworn Statement (philippine Bidding Documents Format)