Wood Tenders

Details: Division02-existing Conditions Division03-concrete Division04-masonry Division05-metals Division06-wood, Plastics, And Composites Division07-thermal And Moisture Protection Division08-openings Division09-finishes Division21-fire Suppression Division22-plumbing Division23-heating, Ventilating, And Air Conditioning Division25-integrated Automation Division26-electrical Division27-communication ***documents Are Available Through The Construction Association*** B, C & D Building Accessibility Upgrades Nbcc Moncton Campus Moncton, Nb 153-nbc Bw4c19 The Pre-site Visit Date Has Been Changed To January 15, 2025 At 1:00 Pm. No Addenda Will Be Issued. Address All Inquiries To Architects Four Limited 18 Botsford Street, Suite 100 Moncton, Nb E1c 4w7 Attention Architecture Andre Boudreau 506-857-8601 Andre@architects4.ca Site Visit Date & Time January 16, 2025 At 11:00 Am Contact Kyler Doucet 506-863-9721 Kyler.doucet@nbcc.ca This Is A Tender Notice Only. In Order To Submit A Bid, You Must Obtain Official Tender Documents From The New Brunswick Opportunities Network, Another Authorized Tendering Service Or As Indicated In The Tender Notice. Effective December 1, 2022, The Crown Construction Contracts Act And Regulations Are Repealed. This Procurement Is Subject To The Procurement Act And Construction Services Regulation. All Bid Submissions Must Be Accompanied By A Security Deposit In The Amount Of Ten Percent (10%) Of The Total Bid Price. Further Details Related To Bid Bond Requirements, Contract Term And Insurance Requirements Are Listed In The Related Tender Documents. The Province Of New Brunswick Reserves The Right To Waive Minor Non-compliance Where Such Non-compliance Is Not Of A Material Nature In Its Sole And Absolute Discretion, Or To Accept Or Reject In Whole Or In Part Any Or All Bids, With Or Without Giving Notice. Such Minor Non-compliance Will Be Deemed Substantial Compliance And Capable Of Acceptance. The Province Will Be The Sole Judge Of Whether A Bid Is Accepted Or Rejected. This Procurement Is Subject To The Canadian Free Trade Agreement. Further Details Related To Bid Bond Requirements, Contract Term And Insurance Requirements Are Listed In The Related Tender Documents.

Description: CATEGORY: water tank 5000 Lit , PVC Cover for Sentex water tank 2000 Lit , PVC Cover for Sentex water tank 500 Lit , PVC pipe 15mm 30 Mtr Roll , PVC pipe 25mm 30 Mtr Roll , Flush Tank Fitting for Commode Toilet Tank , Seat cover EWC , European type W.C seat , Orissa Pan Indian toilet Seat , Wash Basin , Brass Gate Valve Gun Metal 32mm Brass , Brass Gate Valve Gun Metal 40mm Brass , High Pressure 15mm DPR Brass Float Valve 15mm Complete Set , High Pressure Brass Float Valve 20mm complete set , High Pressure Brass Float valve 25mm , High Pressure Brass Float valve 32mm , High Pressure Brass Float valve 40mm , Plumber thread Kacha Dhaga pack of 10 Stick thread and Gasket Sealant 10 g , Teflon Tape , G.I.Pipe 15mm C Class make Jindal , G.I.Pipe 20mm C Class make Jindal , G.I. Socket 15mm Make Unik , G.I. Socket 20mm Make Unik , G.I. Socket 25mm Make Unik , G.I. Socket 32mm Make Unik , G.I. Reducer Socket 20X15mm , G.I. Union 15mm make Unik , G.I. Union 20mm make Unik , G.I. Union 25mm make Unik , G.I. Union 32mm make Unik , G.I. Union 40mm make Unik , G.I. Union 50mm make Unik , G.I. Tee 15mm make Unik , G.I. Tee 20mm make Unik , G.I. Elbow 15mm make Unik , G.I. Elbow 20mm make Unik , G.I. Elbow 25mm make Unik , G.I. Elbow 32mm make Unik , G.I. Nipple 150 x 15mm dia , G.I.Nipple 100 x 15mm dia , G.I. Nipple 50 x 15mm dia , G.I. Nipple 50 x 20mm dia , G.I. Nipple 100 x 32mm dia , G.I. Nipple 50 x 25mm dia , G.I. Nipple 100 x 25mm dia , G.I. Nipple 150 x 25mm dia , G.I. Tank Nipple 40mm make Unik , Disk Spindle 03 Nos and 04 Nos , Brass spindle half round , Brass spindle Full round , M Seal , Acrylic Distemper Interior 10 Ltr Packing , Acrylic Distemper Interior 20 Ltr Packing , Acrylic Distemper Exterior 10 Ltr Packing , Acrylic Distemper Exterior 20 Ltr Packing , Wall putty , Dulux Premium Exterior Emulsion Paint 20 Lit Packing , Stainer 100 ML , Stainer 200 ML , Synthetic Enamel paint 4 Ltr Packing , Synthetic Enamel Brown Paint , Synthetic Enamel Dark Brown Paint , Wood Primer , Red Oxide , Thinner , Tarpin Oil , Chalk Mitty , Touchwood , Regmaar 180 Nos , Regmaar water proof , Heatex , Sealer , Painting Brush 2 inch , Painting Brush 3 inch , Painting Brush 4 inch , 9 inch Paint Roller Brush , CPVC Elbow 15mm , CPVC Elbow 20mm , CPVC Tee 15mm , CPVC Tee 20mm , CPVC MTA 15X20mm , CPVC FTA 20X50mm , CPVC Socket 15mm , CPVC Socket 20mm , CPVC Union 15mm , CPVC Union 20mm , PVC Elbow 2 inch Dia , PVC Tee 2 inch Dia , P-Trap 4 inch Dia , PVC Pipe 2 inch Dia 20 feet Long , PVC Pipe 4 inch Dia 10 Mtr Long , PVC Solution , Colour interlocking tile 60mm , Cement 50 Kg Bag , Coarse Sand , Stone aggregate 20mm

Details: Supply Of One Rake Set Of Seats Without Seat Fixing Profile For Trainset -18 As Per Specification Icf/md/spec-367 Rev-02 For Mc,tc,dtc,dtc2,ndtc Coaches & Icf/md/spe C-366 Rev-03 For Ndtc/ec & Ndtc/ec2 Coaches., As Per Drawing: Mplseatsts18 Version 6, Pack Ing Instruction: Chair Car Seat( Ac & Nac ) : I. All Protruding Portions Of The Chair Car Seat Should Be Protected With Plastic Cover. 2.then Complete Seat And Its Corners / Hand Re St/ Foot Rest Should Be Properly Wrapped With Biodegradable Air Bubble Sheet Of Thick Ness 30 Micron And Bubble Diameter 10mm. 3. The Full Seat Should Be Further Wrapped W Ith 3 Ply Corrugated Paper Sheet. 4. Each Individual Chair Should Be Covered All Aroun D With Transparent, Plain, Biodegradable, Polythene Sheet To Prevent Ingress Of Dust/ Water. 5. The Seat Bottom Frame Portion Should Be Fitted With M.s Supports For Its Bala Ncing, So That The Chair Can Rest On The Floor Without Tilting On Any Side. 6. The Overa Ll Packing Should Be Such That It Is Not Damaged During Transportation Of The Materia L, The Seats Should Be Tied Up In Pairs Only. 7. All Hardware/accessories/loose Items In O Ne Coach Set Should Be Separately Packed In Wooden Box Having Sufficient Strength. 8. A List Should Be Pasted On Each Box Showing Purchase Order No., Pl No., Description Of I Tem, Drg. No., Quantity, Firm Name, Address & Date Of Dispatch And Its Contents. Note : Q R Code Is To Be Affixed " Near Manufacturer Name Plate On Each Seat " On Top Of Packed Seat As Per Pi Mentioned Above " On Top Of Wooden Box For Sr.no.7 Qr Code Having Detai Ls As Listed Below : 1 Name Of The Manufacturer 2 Purchase Order Number 3 Purchase Order Date 4 Unique Serial Number (or Lot Number For Bulk I Tems) Of The Manufacturer Or 5 Date Of Manufacture 6 Delivery Challan No. 7 Delivery Challan Date The Qr C Ode Shall Be As Per Iso/iec18004 Model2 And The Data Shall Be Available As Xml Using Th E Tags Detailed Above. Incase The Above Details Are Not Available, Or The Qr Codes Are Not Readable, The Supplied Material Is Liable To Be Rejected. [ Warranty Period: 84 Months After The Date Of Delivery ]

Description: CATEGORY: Atta , Multi Grain Flour , Bajara Atta , Ragi Atta , Surti Kolam Rice , Basmati Rice , Brown rice , Idli Rice , Puffed Rice , Maida , Cornflour , Sugar , Jaggery , Poha , Oats , Daliya , Sooji , Sevaiya , Roasted Sevaiya , Sabudana , Peanuts , Besan , Sattu Powder , Coconut oil , Oil Refined Sun Flower , Mustard Oil , Olive Oil , Ext virgin Olive Oil , Besan boondi , Soya Chunks , Tea powder , Instant Coffee , Green Tea , Ginger Tea , Lemon Tea , Salt , Black salt , Toor dal , Channa dal , Moong dal , Moong Whole , Moong Dal chilka , Masoor dal , Masoor Whole , Urad dal white , Urad dal chilka , Urad dal Whole , Lobia , Rajma Lal , Green Pea Dried , Red Channa , Matki , Kabuli Channa , Mix Dal , Roasted Chana dal , Bhuna Channa , Kaju Whole , Kaju kani , Kismish , Red Munakka , Almond , Magaj tari , Dates Seedless , Dates With seed , Pistachio , Walnut , Chocos , Muesli , Corn Flakes , Jam , Honey , Noodles , Soya Sauce , Vineger , Red Chilly Sauce , Sweet Chilli Sauce , BBQ Sauce , Tomato ketchup , Aromat Powder , Coconut Kish , Peanut Butter , Sunflower seed , Pumpkin seed , Flaxseed , Sabja Seeds , Chia Seeds , RoseWater , KewraWater , Electrol Powder , Coconut Dry , Red Chilly Powder , Haldi Powder , Dhaniya Powder , Garam Masala , Kasturi Methi , Deggi Mirch pwd , Whole Jeera , Shahjeera , Rai , Kashmiri Chilly Whl , Dhaniya Whole , Tejpatta , Methi seed , Kalonji Seed , White Till , Black till , Ajwain , Badi sauf whole , Javitri , Jayphal , Black Cardamom , Green Cardamom , Dalchini , Clove , Star Anise , Black Pepper whole , Imli , Mutton Masala Powder , Chicken Masala Powder , Shahi Biryani Masa , Amchur Powder , Chana Masala , KK Masala , Pav Bhaji Msl , Sambar Masala , Chat Masala , Hing Powder , Panco crump , Khaskas , Gond , Pickle Mixed , Papad , Coco Powder , Custard Powder , Black Olives slice , Green olives Slice , Quinoa , Tomato puree , Mustard Paste , Mayonaise , Pasta Penne , Pasta fusili , Oregano Dry , Chilli flakes , Tyme dry , Thai Curry Paste , Makhana , Coconut Milk , Good day Biscuits , Peanuts Chikki , Rajgiri Chikki , Dry fruits chikki , Tetra Pack Juice , White pepper powder , Salted Cashunuts , Salted almond , Rajgiri Seeds , Soya chaap , Kokam , Kokam syrup , Bournvita , Farsan - Mix , Silver foil , C Wrap , Wooden Spoon , Foil Container , Butter paper , Disposal Caps , Disposal Gloves , Disposal Glass , Tea Cup110ml , Packaging Bag , Tissue Paper , Compartment Plates , Paper Plate , Steel wool , Scotch bright , Wiping Cloth , Muslin Cloth , Duster , Sponge Wipe , Dish Washing PWD , Dish Washing Lq , Dish Quick , Dish Care , Front Load Lq , PKG Drinking Water , Wiper Comm , Rbr Hand Glv-HK , Handwash Lqd refill , phenyl , Harpic , Charcoal

Description: CATEGORY: Wash hand basin white of size 450mmx300mm , PPR Reducer Elbow 32mm x 20mm dia , Brass CP Wall Mixer for mixing hot and cold water , Distribution box 8 way double door SPN , MCB SPN 240 Volts 32 Amps , MCB SP 6 to 32 Amps , PVC tape 19mm wide 5 m long , Cable PVC insulated electric cables of size 1.5 Sqmm single core , Cable PVC insulated electric cables of size 2.5 Sqmm single core , Cable PVC insulated electric cables of size 4 Sqmm single core , PVC casing capping of size 1inch medium grade , PVC casing capping of size 3 by 4 inch Medium Grade , Switch Piano 5 Amp 230 Volts Flush type one way , LED Tube light fittings 15W 230V box type 4 feets with CRCA body , Steel screw full thread with rawl plug of 1 1 by 2 inch , PVC switch board size 7 inchx4 inch , PVC switch board size 8 inch x 10 inch , PVC L bend and T junction , Switch socket combination 2 in 1 and 15 Amp 230 Volts , Switch socket combination 5 Amp 230 Volts , Service bracket 40mm dia GI Tubing medium grade 1.5 Mtr Long , Service cable PVC insulated aluminium conductor 10 Sqmm 2 , Ceiling Rose three terminal , LED Bulk head fitting with LED lamp 10 watts , PVC Flexible wire copper conductor multi stranded 0.0016 by 76 , PVC Flexible Conduit pipe 15 mm dia , PVC Round or Squire Block , Fire extinguisher of one kilogram capacity , Exhaust fan 230 volts 300 mm sweep plastic body , Water cooler of capacity 40 ltrs , Earthing plate 600 x 600 x 6 mm , CI earth pit cover of size 300 x 300 x 6 mm , Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long. , GI wire 4 mm diameter , Charcoal , Salt normal , Air termination single pointed aluminium rod 12 mm dia and 300 mm long. , Testing point terminal block make of gun metal , Aluminium strips 25 x 3.0 mm , Galvanised Iron strip 32 x 6 mm , Insulating PVC block 75x75x30mm with insulating clamp nut and bolt , Silver Stainless steel table 1800x900x750mm , Dining Chairs steel made out of superior quality , Water Dispenser of 230 V 500 Watts without refrigerator , Study table of size 4x2 wooden top on round tube structture with three drawers , Study chair of size length 56cm height 82 cm width 56 cm Lacqured finish , Plastic dustbin of capacity 10m ltrs , Peg set of six

Description: Disposal Of Scrap Released Materials : (1) Milton Water Bottle 2+2.5 Ltr., Qty=438 Nos. (2 Ltr.=413 Nos. 2.5 Ltr.=25 Nos.) (2) Casserole, Qty=08 Nos. (3) Weight Machine, Qty=01 Nos. (4) Jug Ss, Qty=11 Nos. (5) Kalchul, Qty=01 No. (6) Khunti, Qty=01 No. (7)degchi Ss, 5, 6, 7, 12 Inch, Qty=11 Nos. (8) Degchi Aluminium 12 Inch, Qty=01 No. (9) Deghchi Ss 8,9,10 Inch, Qty=21 Nos. (10)glass Ss, Qty=07 Nos. (11) Karahi Ss 8,9,10,12 Inch, Qty=13 Nos. (12) Mug Ss, Qty=03 Nos. (13) Kalchul, Qty=06 Nos. (14) Plate Ss 5 Inch, Qty=04 Nos. (15) Kotori Ss 3.5 Inch, Qty=06 Nos. (16) Tea Spoon Ss, Qty=26 Nos. (17) Thali Ss 13 Inch, Qty=19 Nos. (18) Thali Ss 14 Inch, Qty=16 Nos. (19) Iron Chimta, Qty=03 Nos. (20) Sarasi Ss, Qty=01 No. (21) Belan Wooden, Qty=01 No. (22) Degchi Cover Ss 10 Inch, Qty=01 Nos. (23) Fry Pan Ss, Qty=03 Nos. (24) Alumunium Mug, Qty=02 Nos. (25) Tea Pot Ss, Qty=02 Nos. (26) Tea Stainer Ss, Qty=01 No. (27) Pan Commode, Qty=03 Nos. (28) Pvc Mug 01 Ltrs., Qty=15 Nos. (29) Vacuum Disc, Qty=15 Nos. (30) Cholni Ss, Qty=02 Nos. (31) Utensil Rake Ss, Qty=08 Nos. (32) Pressure Cooker 3+5+6.5 Ltr(3 Ltrs=18 Nos., 5 Ltr=17 Nos., 6.5 Ltr=03 Nos.) (33) Mixer Grinder, Qty=32 Nos. (34) Insect Fly Cather, Qty=19 Nos. (35) Thermo Flask (plastic) Half Ltr., Qty=360 Nos. (36) Thermo Flask Half Ltr. Steel, Qty=170 Nos. (37) Led Tricolour 04 Cell Torch, Qty=559 Nos. (38) Tricolour Signalite Torch 04 Cell(plastic), Qty=249 Nos. (39) Torch Two Cell(s/steel), Qty=143 Nos. (40) Torch 3 Cell(s/steel), Qty=119 Nos. (41) Shoe Shiner, Qty=04 Nos. (42) G. I. Water Bottle, Qty=72 Nos. (43) G. I. Bucket, Qty=15 Nos. (44) Emergency Light, Qty=07 Nos. (45) Non Stick Fry Pan, Qty=19 Nos. (46) Non Stick Tawa, Qty=02 Nos. (47) Jug Aluminium, Qty=02 Nos. (48) Ms Karahi, Qty=04 Nos. (49) Karahi, Qty=12 Nos. (50) Iron Tawa, Qty=02 Nos. (51) Gas Stove 1,2,3,4 Burner Body, Qty=36 Nos.location-ccc/e/store/gmo.

Details: Description The City Of Bayawan, Through Its Bids And Awards Committee (bac), Invites Suppliers / Manufacturers / Distributors / Contractors To Bid For The Hereunder Projects: Itb No. Pr No. Project Name Total Abc Of Project Source Of Funds Itb 25-010 100-25-01-011 Supply And Delivery For Drrm-h Program 658,936.00 Annual Budget Lot No. Description Of Lot Total Abc Of Lot Bid Security Cash/mc/bank Gurantee (2% Of Abc) 1 Medical Laboratory Supplies 575,090.00 11,501.80 3 Non-perishable 40,601.00 812.02 4 Other Supplies 32,800.00 656.00 5 Other Supplies And Materials 10,445.00 208.90 Item No. Qty Unit Articles Brand "unit Price" Total Lot No. I Medical Laboratory Supplies 1 200 Piece "pulse Oximeter , Oled Display Power Requirements: 2*1.5va Alkaline Batteries Good Quality" 2 94 Unit Bp Apparatus Set, Stethoscope With Sphygmomanometer Adult 3 30 Unit Glucometer, Compatible With Existing Strips (onetouch) 4 42 Bottle Blood Glucose Test Strip, 25pcs/box, Compatible With Existing Glucometer One Touch 5 30 Box Lancets, G23, 200pcs/box 6 50 Piece Cotton Balls Container, Material: Plastic. Plastic Cotton Canister. 7 4 Box Surgical Gloves, 7.5 Size, 50 Pairs/ Box 8 50 Piece "thermal Scanner, Specifications: Color:white Blue Store Data: 30 Groups Display Exact Number:0 . 1c ( 0 . 1°f） Storage Temperature:-20-55°c Operating Ambient Temperature The Best Temperature：10-40°c Optimum Temperature: 25 °c Relative Humidity:< 85% Power：dc 3v ( Two Aaa Batteries In Series)without Battery) Battery Not Included Note: Dt-8826 Model (2x Aa Batteries In Series) Battery Not Included Measurement Range Distance Range：32.0-42 .0°c Optimum Measuring Distance：3-5cm Automatic Shutdown：15s Accuracy Of Measurement：32-42 . 9°c ( 89 . 6-109 2°f） 0.2 °c ( 0 . 4f°） Product Size:146*85*42mm Package Included: 1 * Handheld Frontal Temperature 1 * Manual" 9 12 Box Face Mask, 3 Ply, Fifty (50) Pieces Per Box 10 100 Piece Armsling, Size: Large 11 18 Set Bp Apparatus, Set With Stethoscope (pedia) 12 33 Set "padded Board Splint Set, Padded Board Splints Are Made Of 3 1/2"" Solid Wood Core. 1/2"" Padding On One Side Rounded Wood Corners For Safety And Comfort Covered With Heavy Duty Vinyl Sealed For Easy Clean-up And Disinfection Set Of Padded Board Splints Contains: (2) 15 Inch (2) 36 Inch (2) 54 Inch Item #560000 Comes With A Carrying Case Reusable Orange Vinyl Bag" 13 35 Piece "hot & Cold Packs, Suitable For Both Cold And Hot Therapy (acceptable Temperature:-20~100°c) Remains Soft And Flexible After Freezing, Even In Temperatures As Low As -20°c Retains Heat Or Coolness For A Minimum Of 45-60 Minutes. Reusable" 14 68 Piece "elastic Bandage , Size: 4 Inches With Hook Closure Made Of High-quality Material Breathable Fiber Bandage Hook Closure Design High Elasticity Washable And Reusable" 15 103 Pack Triangular Bandage, Size: 96cm X 96cm X 136cm 16 70 Bottle Povidone Iodine, 10 % Solution, 120 Ml 17 23 Unit "first Aid Kit Bag, First Aid Kit Bag - Outdoor Emergency Rescue -medical Supplies Bag -high-density Ripstop, Waterproof Fabrics -reflective Strips -carried On The Shoulder Or By Hand -many Pockets And Classification Compartment -material: Pvc Oxford -size: 33-35*23-24*13-14cm -type: Large Capacity -color: Red -with Embroidered Logo Of Cdrrmo At The Front" Lot No. Ii Life Saving Devices, Gears And Accessories 18 5 Piece "stretcher, Emergency Folding Stretcher Made Of Aluminum Alloy Weight: 15-19 Lbs Max. Capacity: 350 Lbs Reclining Back With Wheels Expansion Size: 185cm X 50cm X 15cm Folding Size (length X Width X Height): 93cm X 50cm X 9 Cm Fabric: High Quality Canvass, Breathable And Waterproof Easy To Fold And Open With 2 Safety Belts" Lot No. Iii Non-perishable 19 5 Box Cup Noodles, At Least 40g/cup 48pcs Per Box(assorted Flavor) 20 92 Pack Biscuits, Crackers, 25g X 12s/pack Plain 21 656 Bottle Bottled Water, 750ml 22 600 Piece Coffee , 3 In 1 Twin Pack Coffee Sachet, 48g 23 45 Pack Biscuits, With Cream Filling, Individual Pack (10s/pack) 24 70 Pack Biscuits, With Peanut Butter Filling, Individual Pack (10s/pack) Lot No. Iv Other Supplies 25 20 Piece Metal Pen Light, Led • Colour Temperature: Cool White • Max Lumens: 35 • Beam Distance: 9m • Battery: 2 X Aaav • Impact Resistance: 1m 26 75 Piece Battery, 1.5 Volts; Aaa X 2pcs; Heavy Duty 27 18 Piece Storage Box, Plastic ,(large) 120l Lot No. V Other Supplies And Materials 28 31 Pack Paper Cup , 16oz, 25 Pcs. Per Pack 29 25 Pack Wooden Spoon, 100pcs/pack 30 25 Pack Wooden Fork, 100pcs/pack *** Nothing Follows *** Bid Documents Shall Be Available At The Bac Office, New City Hall, Lgu Bayawan City Upon Payment Of Prescribed Non-refundable Fee In The Amount Of Php 1,000.00 Bidders Shall Drop Their Technical And Financial Proposals In The Bid Box At The Bac Office, Bayawan City On Or Before The Deadline Of Submission Of Bids As Shown Below. All Particulars Relative To Eligibility Process, Opening And Evaluation Of Bids, Postqualification And Award Of Contract Shall Be Governed By The Applicable Provisions Of Ra. 9184. The City Of Bayawan Reserves The Right To Reject Any Or All Bids, To Waive Any Defects Or Formality Therein And To Accept Bids Considered Responsive And Most Advantageous To The Government. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule Issuance Of Bid Documents January 7, 2025 To January 20, 2025@ 5:00 P.m. Pre-bid Conference None Deadline/opening Of Bids January 21, 2025@ 9:00 Am Post Qualification January 28, 2025@ 9:00 Am Awarding Of Bids February 4, 2025@ 9:00 Am Approved: (sgd)virginia D. Sadiasa City Civil Registrar Bac Chairman

Description: Contract notice – General guidelines, standard rules Open procedure (construction work) 2270 Johann-von-Nassau-Schule Dillenburg; Basic sanitary school building, 1st building, component C, administration; Carpenter, interior doors, carpentry work, interior doors 2270 Johann-von-Nassau-Schule Dillenburg; Basic sanitary school building, 1st building, component C, administration; Carpenter, interior doors, carpentry work, interior doors 2270 Johann-von-Nassau-Schule Dillenburg; Basic sanitary school building, 1st building, component C, administration; Carpenter interior doors - construction site setup - creation/revision of door list - technical processing/work planning (for approx. 45 elements) - approx. 5 door elements with fire protection T30 or T30-rs, approx. 1.01 x 2.135 m, of which 1 element with F30 glass cutout and revolving door drive (handicapped accessible) - approx. 20 door elements without fire protection, approx. 1.01 x 2.135 m, some with glass cutout, some. Ssk 3, - 2 door transom elements, approx. 1.01 x 2.75 m - 1 door side panel transom element, approx. 1.89 x 2.75 m, door leaf, side panel and transom with glazing, with revolving door drive (handicapped accessible) - 2 glazing frames with transom, approx. 1.01 x 2.75 m - 2 passage frames - 1 all-glass sliding door element, approx. 1.01 x 2.135 m (w x h) - 1 output window as a sliding window, approx. 1.51 x 1.135 m (w x h) - approx. 3 historical single-leaf door elements to be removed, refurbished in the workshop and reinstalled - Reproduction of approx. 8 historical single-leaf door elements based on the existing model and installation - approx. 30.0 m historical wooden skirting boards Remove, rework in workshop and reinstall - Reproduction of approx. 150.0 m historical wooden skirting boards based on model stock and installation

Description: CATEGORY: Transportation of dismantled 3No. to 5 No. AC units Upto 20 KM with all accessories incl. hiring of vehicle, manpower etc , Transportation of dismantled 2 No. AC units From 21 KM to 50 KM with all accessories incl. hiring of vehicle, manpower etc , Transportation of dismantled 3No. to 5 No. AC units From 21 KM to 50 KM with all accessories incl. hiring of vehicle, manpower etc , Transportation of dismantled 2 No. AC units From 51 KM to 100 KM with all accessories incl. hiring of vehicle, manpower etc , Transportation of dismantled 3No. to 5 No. AC units From 51 KM to 100 KM with all accessories incl. hiring of vehicle, manpower etc , Transportation of dismantled 3No. to 5 No. AC units From 100 KM Upto 200 KM with all accessories incl. hiring of vehicle, manpower etc , ITC of 1.5 or 2TR Window AC unit with properly finshing and minor civil work , ITC of wall mounting type 1.5 or 2TR Split AC unit with properly finishing and minor civil work , ITC of 2x1.5 TR High Sensible AC unit with properly finishing and minor civil work , S and F of 1 by 4 inch Copper refrigeration pipe , S and F of 3 by 8 inch Copper refrigeration pipe , S and F of 1 by 2 inch Copper refrigeration pipe , S and F of 5 by 8 inch Copper refrigeration pipe , P and W of expanded polyethylene foam tube insulation for 1 by 4 inch Copper refrigeration pipe , P and W of expanded polyethylene foam tube insulation for 3 by 8 inch Copper refrigeration pipe , P and W of expanded polyethylene foam tube insulation for 1 by 2 inch Copper refrigeration pipe , P and W of expanded polyethylene foam tube insulation for 5 by 8 inch Copper refrigeration pipe , S and F of prefabricated powder coated heavy duty iron stand having projection arm minimum 600 MM , S and fabrication of M.S. frame made out of various M.S. Sections incl. hardwares finishing, painting, minor civil work etc , P and F of 12mm thick prelaminated particle board with decorative lamination on both side flat pressed 3 layer or graded wood particle board , S and L of 4 X 1.5 Sq mm copper conductor unarmoured cable of 1.1 KV grade ISI mark , S and L of 3 X 2.5 Sq mm copper conductor unarmoured cable of 1.1 KV grade ISI mark , S and F of 20 mm Dia heavy gauge rigid UPVC pipe of ISI mark , S and F of 25 mm Dia heavy gauge rigid UPVC pipe of ISI mark , S and L of 3 X 2.5 Sq mm copper conductor armoured cable of 1.1 KV grade ISI mark , S and M end termination with brass compression gland for 3 X 2.5 Sq mm size of PVC insulated PVC sheathed or XLPE CU condr armd cable , S and F of 2 way SPN MCB DB , S and F of 5A to 32A 10KA C curve SP MCB , S and F of 5A to 32A 10KA C curve SPN MCB , S and F microprocessor based energy saver unit for controlling the operation of 2 A.C. unit having safety protection, disply, auto, manual mode , Repairing of faulty AC controller of AC unit , Sand F of electronic AC voltage stabilizer suitable for operation on 130Volt to 290 Volt for 1.5TR AC unit , Installation of SPN or TPN MCB DB , Fixing of SP or SPN or DP or TP or TPN or FP MCB , Fixing of outdoor condensor Stand , Fixing of both size of refregerent piping but Without heatlone tube , Laying of 2 or 3 or 4 core copper conductor armoured or unrmoured cable up to size 4 sq mm. , Fixing of Cyclic timer , Fixing of 20mm or 25mm dia drain water PVC pipe.

Details: Description Materials: 12.0 Pcs. Marine Plywood 3/4" 5.0 Pcs. Marine Plywood 1/4" 6 3.0 Itrs Stikwel 30.0 Pcs. Liston 1/4"x1"x10' 20.0 Kgs. Wooden Cornice 1"x2"x10' 4.0 Kgs. Finishing Nail Assorted 8.0 Pcs Pinlight 4" 1.0 Lot Electrical Materials 2.0 Gals. Glazing Putty 3.0 Gals. Epoxy Primer With Cat 2.0 Gals. Lacquer Thinner 1.0 Gal. Elastomeric Paint 1.0 Gal. Paint Thinner 1.0 Gal. Qde White 15.0 Pcs. Sanding Paper #120 2.0 Pcs. Baby Roller 4" 5.0 Pcs. Floppy Disc #4 14.0 Gals Latex Flat 13.0 Gals Latex Semi Gloss 5.0 Sets Paint Roller 7" With Tray 21.0 Pcs Sanding Paper #200 7.0 Pcs Paint Brush #2