Wood Tenders

Description: Condemned Bg 8 Wheeler- Coaches With All Available Ferrous-non Ferrous-wooden Fittings Thereon But Excluding The Following Reclaimable Items-mechanical Rc Items- 1) Distributor Valve Complete Set, 2)bio - Toilets With Fittings, 3) Buffer Plunger And Buffer Casings With Rubber Pad, . Electrical Rc Items (1) Batteries, (2) Regulators Coach Numbers- 1) Sr Rr89921 -[1 Coaches]. Ds8 No: 232842 Dt 20.04.24, Location: At Tondiarpet Marshalling Yard, Custodian: Sse/c&w/tnpm, Pl.no.98111061.note: At The Time Of Deivery Excluding Rc Items, Other Items Including Zero/low Value Items Like Rexin, Frp,resonal Foam Seats To Be Completely Cleared By Purchaser From The Location. 2) All Rc Items Should Be Handed Over To Custodian At Respective Location.(3). Rate Per Number Should Be Quoted (4) Cutting Permitted To Loadable Size Only. (5) Crane Loading Permitted. (6) Coaches Are In Grounded Condition.(7) Draw/hook And Screw Coupling Should Be Defaced Before Delivery.

Description: Dismantling Of Scrap Condemned Abandoned 20 Nos. Of Railway Quarters At Ctc Under Sse/works/ctc And Disposal Of Waste Scrap From The Site After Dismantling Of The Quarters. The List Of Quarters Condemned For Disposal Is As Per Annexure Attached. The Estimated Quantity (approximate Quantity) Of Waste Scrap Likely To Be Generated From The Above Mentioned Structures Are Also Detailed As Per Annexure Attached. Delivery Will Be Done On 1.0 By Lot Basis [total Deliverable Quantity In 1.0 By Lot] Total 20 No. Of Condemned Railway Quarters Which Is Deliverable In 1.0 By Lot [ The Lot Contains 1. Brick Masonry = 846.21 Cum Approximately, 2. Laterite Stone Masonry = 111.51 Cum Approximately 3. Ms Angle = 3032.68 Kgs Approximately 4. Ms Door, Windows & Grill =15.86 Mt Approximately 5. Wooden Door, Windows & Jaffery = 3617 Kgs Approximately 6. Pvc Door =45.593 Sqm Approximately 7. 16 Mm Dia Window Rod =537.03 Kgs Approximately 8. Ng Rails= 4.01 Mt Approximately]

Description: Preliminary information for the purpose of shortening the deadline for receipt of offers - general guidelines (construction work) Carpentry work on the rear walls of lecture halls Conversion and renovation of the institute building of the Department of Chemistry and Materials Science on the Lichtwiese campus of the TU Darmstadt, construction phase ACB / learning center + library ... More Carpentry work on the rear walls of lecture halls Conversion and renovation of the institute building of the Department of Chemistry and Materials Science on the Lichtwiese campus of the TU Darmstadt, construction phase ACB / learning center + library Carpentry work on the rear walls of lecture halls For your information! This is preliminary information - applications are only possible after the tender has been published/announced. Approx. 60 m² - rear walls of the large lecture hall: metal substructure and composite panel made of gypsum fiber with a cover layer made of real wood veneer Approx. 45 m² - rear walls of 2 small lecture halls 4 reveals for door openings

Description: Supply of Testing Equipment for Materials and Industrial Engineering: Lot 1: Equipment for Expertise Laboratory Lot 2: Device for Cnd of Steel Cables by Magneto-inductive Method Lot 3: X-ray Generator Lot 4: Benchtop Lapping Machine Lot 5: Semi-automated Scanner Lot 6: Fatigue Device for Sealing Systems Lot 7: Climatic Chambers for Carpentry Service Lot 8: Air Jet Sieve for Cement Lot 9: 20kn Traction/Compression/Bending Device Lot 10: Automatic X-ray Film Developer Lot 11: Panoramic Collimator Lot 12: Dosimeter for Detection of X-rays and Gamma Rays Lot 13: Paper Thickness Meter Lot 14: Common Laboratory Equipment Lot 15: Accelerated Aging Chamber with Xenon Arc Lot 16: Machine Torsion Testing of Valves Lot 17: Climatic Chamber for Conditioning of Wood-Based Panel Samples Lot 18: Concrete Reinforcement Detector

Description: Contract notice – general guideline, standard rule open procedure (construction work) New building for the Florenberg school in Pilgerzell, metalwork work on a glass roof New building for the Florenberg school in Pilgerzell, metalwork work on a glass roof New building for the Florenberg school in Pilgerzell, metalwork work on a glass roof At the ... MoreNew building for the Florenberg school in Pilgerzell, metalwork work on a glass roof New building for the Florenberg school in Pilgerzell, metalwork work on a glass roof New building for the Florenberg school in Pilgerzell, metalwork work on a glass roof The construction project involves a new primary school building, as a special two-story building with basement sections, which is integrated into a hillside location. Overall, the property is divided into 4 building sections, which are connected to one another via corridors and open staircases. The building is being constructed as a solid construction in reinforced concrete across all floors. A vertical, ventilated wooden cladding with integrated, generously sized wooden window bands determines the external appearance. The roof is being designed as a warm roof and will have a gravel covering and will be covered with a PV system. Interior walls will be painted white or, depending on the area, covered with wooden cladding to match the external appearance. Suspended ceilings will be closed with a white grid ceiling or light wood wool lightweight panels. A steel-constructed arcade will be built on the west side. The school will be built on the area of the currently used schoolyard next to the existing school building, which will be demolished at a later date. An interim area for the schoolyard will be set up to the north for the construction period. After the new building has been constructed, the existing building will be demolished so that the built density, including the height, is significantly reduced. The demolition area will be landscaped and used as a playground area. The adjacent gymnasium will be retained. The work by the AN involves the delivery and installation of a glass roof construction with external sun protection system. The following service components are included in the scope of services: - 1 piece (approx. 42 m2) glass roof with external sun protection system: width x length = 5.02 x 7.96 m - 2 pieces smoke extraction wings with chain drive 1.32 x 2.39 - 30 m all-round thermally insulated component connection

Details: Endwall Door Complete., As Per Drawing: Lw56350 Alt I, Packing Instruction: Lhb doors (body Side Door And Saloon Sliding Door ) : Lhb Doors To Be Wrapped In Biodegra dable Bubble Sheet And To Be Packed In Wooden Box Made Of Planks Of Minimum 20mm Thi ck. The Wooden Boxes To Be Strengthened Along The Length At Four Places With Woode n Strips Of 40x100mm Suitable Length All Around The Box. A List Should Be Pasted On Ea ch Wooden Crate Showing Order No,pl No, Description Of Item,drg No/spec No/set List N o With Version,qty,firm's Name & Address,date Of Despatch Etc.

Details: Repairing Of Wooden Jetties (14 Nos.) For Sikara Boat Rides At Main Water Body Area Within Eco-park Compound, Newtown, Kolkata.

Description: Public tender Vob/a roofing and plumbing work, decontamination approx. 600 m2 foil gutter top working layer (scaffolding) for protection decontamination in the roof space by vacuuming cleaning, approx. 2500 m2 interior roof, wall and ceiling surfaces, wooden construction, approx. 1600 m2 weight ... more approx. 600 m2 foil gutter top working layer (scaffolding) for protection decontamination in the roof space by vacuuming cleaning, approx. 2500 m2 interior roof, wall and ceiling surfaces, wooden construction, approx. 1600 m2 vaulted surfaces cleaned from above approx. 1180 m2 demolition of natural slate roofing approx. 45 m2 demolition of asbestos roofing approx. 1180 m2 renewal of wooden formwork approx. 1180 m2 old German slate roofing approx. 120 m wall, valley and ridge connections approx. 12 pieces renewal of pinnacle surrounds in copper sheet approx. 34 m gable and cornice cover in copper sheet approx. 50 m hanging gutter in copper sheet flat rate execution documentation

Description: CATEGORY: Spnr Adjustable 300 mm , Saw tension 350 mm length , Hammer set smith 1360 gm , Chisel cold flat CS 20 mm , Cutter anvil flat 400 gms , Hammer tinman paning down 450 gms , Tongs smith hallow bit 610 mm , Wrenches pipe 225 mm , Spnr adjt 100 mm , Hammer copper 1360 gms , Hammer hide faced 680 gms , Container plastic electro plastic 5 ltr , Plier sealing 150 mm , Spnr adjt 200 mm , Tong smith flat 480 mm , Shears fin mans cutter scotch 400 mm , Files tapper saw gegular SC 100 mm , Chisel mortice 16 mm , Cutter glass diamond , Saw tenon 350 mm , Screw driver 9 5 mm , Chest tool kit large wooden , Vices bench 56 mm , File flat SC 150 mm , Screw dvr philips 4x200 , Plier snip nose 140 mm insulated

Description: CATEGORY: Four Way Joint for Tent Extndbl F Supptd , UC 50 and 150 M S Chamcha SS 450MM , Boxes PT GP MK-I , EC Bamboo Support Small , Cap Food Handlers Size 7- 1 4 , 3 Way Jt W Base plate for tent extndbl , Brushes Paint and Varnish Flat 20MM , Utensil Cooking 4 Men Set Degchie Medium , Knife Cook 230MM , Scale Beam Indicating 5Kg , Spoon Serving MK-2 , Frying Pan MP 10 Inch 250mm Dia C Bottom , Strainer Tea Stainless Steel 120mm Bowl , UC 150 Men Set Tawah with Handle , Tumbler SS 300ML , Cover Pillow , Gown Operating , Brushes Paints and Varnishes Flat 12MM , UC 4-6 Man Set Slab Wooden , Duster Dosuti 90cm x 50cm , Net Line Hemp Tank Mule MK-2 , Trousers Drill white Bleached S 1