Wood Tenders

Description: CATEGORY: Steel Tubes, Tubulars and Other Steel Fittings as per IS 1239 (Part 2 - Steel Pipe Fittings) (Q3) , Flashing Tape , Wooden Beading 18mm , Rubber beading for AI door , Fevicol 200 gm , White Cement Make JK , Putty for fixing glass , Wire mesh 0 point 41mm steel , Hydraulic door closer Aluminium Die Cast body between 36 to 60 Kg Make Hardwyn Everest Godrej , Door magnet catcher , Curtain rod 25mm dia stainless steel , plywood 8 feet x4 feet x19 mm Make Green ply or Kit Ply or Century , Tank nipple 20mm ISI Marked , Tank nipple 15mm ISI Marked , GI Tubing 15 mm med Grade Make Jindal or Tata or Surya , GI Tubing 20 mm med Grade Make Jindal or Tata or Surya , GI Tubing 25 mm med Grade Make Jindal or Tata or Surya , CP Mixer WHB 15mm , PVC PTMT Bib Cock with nozzle 15mm Make Polytuff or Shakti , Waste Coupling 32mm dia Make Essco or Pearl or polytuff , PVC Connection pipe 15 x 450mm Make Polytuff or Shakti , Gate Valve 15mm GM Make Prima or Jainko or shakti , Gate Valve 20 mm GM Make Prima or Jainko or shakti , Foam cushion 560x530x100mm Make Sleepwell or Kurlon , Prelaminaed particle board 18 or19mm one side Teak face , Plywood 8 mm 8 feet x 4 feet Make Kitply or Greenply or century , Plywood 18mm size 8 feet x 4 feet Make Kitply or Greenply or century , Plywood commercial BWR 8 feet x4 feet x 12 mm thick Make Kitply or Greenply or century , Prelaminated particle board18mm one side teak 8 feet x 4 feet , Sunmica 0 point 8 mm x 8 feet x 4 feet , Plywood 3 point 5 oblique 4mm 8 feet x 4 feet one side Teakface , Plywood Commercial BWR 8 mm x 8 feet x 4 feet , Varnish in 04 ltrs pack , Fevicol in 2 Kgs per Pkt , varnish clear wood keeper , Fevicol in 1 Ltrs pack , Wooden beading half round 18mm wide , Paint black , Particle Board one side Teakface 18mm size 8 feet x 4 feet , French Polish in 04 Ltrs pack , Plywood commercial BWR 8 feet x 4 feet x,6 mm , Paint White in 4 ltrs pack , Knob fancy type 32mm round

Description: CATEGORY: Cement OPC 43 grade , Sand Coarse confirming to IS 3831970 , Aggregate 20 mm graded to be crushed rock , Aggregate 40 mm graded to be crushed rock , MS angle iron of size 65 x 65 x 6 mm and 4 point 20 Mtr , MS angle iron of size 65 x 65 x 6 mm and 3 poin 40 Mtr , MS Flat iron of size 40 x 5 mm and 2 poinrt 10 Mtr , TMT Bar of 10 mm dia and 3 point 10 Mtr , Chain link Fence 2 point 10 Mtr height , Two strand of barbed wire made out of GI wire of size 2.24 mm dia , Concertina Coil Punched Tape of 600 mm , Security Gate of size 6 point 00 M x 2 point 40 M as per drg att , MS Nut and bolt with washer of size 12 mm dia and 75 mm long. , MS Nut and bolt with washer of size 12 mm dia and 50 mm long , Binding wire 20 gauge 0.9 mm annealed , Shuttering plywood of size 6 feet x 4 feet and 12mm thickness , Nails 2 inch for shuttering , Nails 3 inch for shuttering , Nails 4 inch for shuttering , 2nd class hardwood plain fillets 3 point 00 mtr long and section 50mm x 50mm , Wooden scantling 3mtr long section 100mm x 75mm , TMT Bar 12 mm dia , TMT Bar 10 mm dia , TMT Bar 8 mm dia , Quick Setting Compound , Acrylic Emulsian Paint , Solar Street Light 25 W including pole having length 5 Mtr long 75 mm dia , Pan Motor Tasala 18 inch dia , Showel with wooden handle , Axes Picks 03 Kg head with handle , Wire mess for seving Sand 8 feet x 5 feet , Trowels as per ISI Mark , Brick Hammer 500 gm with handle , Stone Cracker with handle , Plum Bob steel , Nylon mason thread 100 Mtr long , Measuring Tape 05 Mtr retractable grade AI 16 , Measuring Tape 30 Mtr retractable grade AI 16 , Gum Boot , Hand Gloves Rubber , Drilling Machine portable , Steel Cutter Machine with blade , Steel Wood Cutter circular saw , Steel Cutting Blade 4 inch , Steel Cutting Blade 14 inch , Hexa Blade 350 mm long ISI 1st Quality , Welding Machine Portable inverter type , Welding Rod , Auto Darkening Welding Helment , Welding Gloves , Portable Diesel Generator Set 5 KVA , Tool kit , Tape Insulation 1 point 5 inch x 15 Mtr with ISI mark

Description: 05 Coaches--lot No 5624125029 At Crs/tpty Scrap Depot, Ap [andhra Pradesh] Available With Cdms/sd/crs/tpty Scrap Depot. Description: Cond. &u/s Bg & Mg Demu Trailer Coaches Without Bogie Complete, Wheel Sets & Rc Items. Coach Nos. (1)sc Vph 994127(2)gslr 007735(3)wg Scn 007285(4)sc Gs 007432(5)ys 410021 Make:icf/rcf. Net Saleable Qty:105.21587mts Approx.(including Ms Weight:100.0256mts Approx.; App Wt. Of Rexine, Foam, Pvc & Compreg Wood Weight:3.16mts; App Wt Of Aluminium.:0.225mts; App Wt Of S.s Lavatory Pans.:0.27mts; App Wt Of Aluminium Window Frames & Sill Plates:0.189mts; App Wt Of Pvc Copper Cables:0.0195mts; App Wt Of Uic Rubber:0.33mts; App Wt Of Aluminium Chequered Sheets:0.42mts; App Wt Of Aluminium Shutter Frames With Sill Plates Big:0.12mts; App Wt Of Aluminium Shutter Frames With Sill Plates Small:0.056mts; App Wt Of Aluminium Vention Shutters:0.0102mts; App Wt. Of Rubber, Woods, Wooden Seats With Back Rest, Fibre Shutter, Window Glasses.:0.39057mts;)note:-(1) Cutting Is Permitted To Loadable Sizes.(2)rc Items Mentioned In The Excluded/reclaimed Items List To Be Returned To Railways. The Quantity Of Rc Items Mentioned Below Will Be Arrived As Per The Joint Handing Over Memo Issued By The Railway Authorities To The Successful Bidder At The Time Of Cutting/handing Over Of The Lot And The Same List Of Rc Items Should Be Returned To Railways By The Purchaser.(3)railways Does Not Guarantee For Quality, Quantity, Description, Etc. Purchasers Are Advised To Physically Inspect The Lot And Satisfy Themselves Before Bidding As No Communication/complaints Will Be Entertained Under Any Circumstances Regarding Shortage Of Material. (4)any Non-ferrous Items, Electrical Items, Rc Items Found In Excess To The List Mentioned Below & Not Appearing In The List Of Saleable Items To Be Returned To Railways.(5)successful Bidders Must Ensure The Rc Items At The Time Of Taking Over And Same Should Be Returned To Custodian Before Effecting Delivery. In Case If Item Cannot Be Seen/count/weigh Before Dismantling, Then The Same Will Be Jointly Inspected Soon After Dismantling For Inclusion In Joint Collection List Of Rc Items.(6) The Purchaser Is Responsible For Providing Adequate Safety Firefighting Equipment Such As Fire Extinguishers Etc., On The Spot At The Time Of Cutting And Delivery. (7)free Delivery Period (fdp) For The Lot Is 60 Days. (8)in Addition To The Above, Purchasers Must Comply With The Special Conditions Mentioned Below. Location: Line No.01 Of Mrs Cutting Yard. Delivery On Number Basis Only. Total Qty 05 Numbers.pl No 98111048(01) Hsn Code:72042990. Gst @18% On Forward Charge Basis.

Details: -A/R & M/O residential P.W.D. colony at Paonta Sahib Tehsil Paonta Sahib.(SH- Providing and fixing wood work, steel work, sanitary fitings, P/L brickwork, plaster work, distempering, painting in existing building of type II qtr allotted to Smt.Sangeeta Chaudhary Sr. Assistant in PWD Colony).

Details: Pwgsc, On Behalf Of Canadian Wood Fibre Centre (cwfc) In Quebec Within The Canadian Forest Service At Natural Resources Canada, Is Issuing This. Request For Proposal (rfp) For The Acquisition Of High-resolution Portable 3d Scanner And Processing Software Including Delivery, Training Located Quebec City, Québec, Canada), As Detailed In Annex- Requirement.

Details: Description 2 Sets Wooden Table With Chair 4 Pcs Wooden Chair 3 Pcs Wooden Divan Chair 3 Sets Computer Table (regular Size)

Description: Contract notice – general guideline, standard regulation Open procedure (construction work) Restoration measures on wooden doors and wooden components Painting and varnishing work – coatings (DIN 18 363); Carpentry work (DIN 18 355); Fittings work (DIN 18 357); Restoration measures on wooden doors and wooden components Trade Restoration measures on wooden doors and wooden components Construction project: Interior renovation of the east wing – Eberbach Monastery Eberbach Monastery D-65346 Eltville Am Rhein (Rheingau, Hesse) The Eberbach monastery complex is the former Cistercian monastery of Eberbach with buildings from the 12th – 18th centuries. The building and the entire complex are listed buildings. The east wing, originally built in the Romanesque style, has been rebuilt and changed many times over the centuries. Measure: As part of the general renovation, the interior of the east wing is being renovated as an extension of the museum tour and meeting place. The work is being carried out while the museum is still in operation. The renovation and restoration measures are being supervised by the State Office for Monument Preservation in Hesse. This is a requirement of the monument protection laws and the primary goal of monument preservation measures is to preserve the original building fabric. Historic wooden doors and wooden fittings of medium to very high quality are to be restored, including fittings and metal components; in some cases, fittings are to be added. The aim is to conserve and restore the current inventory with the minimum necessary measures: the appearance after conservation or restoration should fit aesthetically into the overall picture of the various rooms and areas. After the work, the doors should not appear as new, but rather transform the existing appearance into a well-maintained one and protect the existing building from further deterioration. The measures in this tender for the restoration of wooden and metal components include - decontamination if wood preservatives are found (cleaning and masking if necessary) - the wooden construction - the wooden surfaces inside and out - the metal surfaces inside and out - the operation and lockability of the doors and fittings - some locking mechanisms (upgrading to a panic function in keeping with historic monuments) - exchange of expertise, coordination and acceptance of intermediate states, documentation of the work and concern: - a total of 11 doors (inside and outside); the doors are of different origins and were dendrochronologically dated between 1200 and 1900. - 6 wooden fittings (railings, balusters, kneeler, wall cupboard) - 3 windows - Approx. 26 m² of floorboards It is assumed that the work will be carried out on site - The work will take place while the monastery is in operation (events, visitors). The circumstances influence the construction process; the execution of the work will be coordinated accordingly. Additional minimum requirements EU-wide tender (summary) References/proof of: At least 5 years' experience in a specialist field corresponding to the service in question. Submission of at least 3 reference objects with clearly subtle handling of the existing building fabric. The reference services include comparably extensive structural measures in monument preservation with high monument care requirements and cooperation with restorers. Requirements for the responsible manager on site: 1. Certified master carpenter or comparable and a skilled tradesman restorer 2. Several years of professional experience in the area of monument preservation, with references in door restoration 3. Ability to manage and coordinate construction sites (proof of at least three construction site managers) 4. Ability to create project-appropriate documentation of measures in words and pictures (proof by submitting appropriate documentation) Requirements for the team on site: At least one other member of the team on site must be fluent in German (in the event of vacation or absence due to illness). For the skilled tradesman restorer to be employed as a specialist foreman (see above), in addition to master craftsman training, proof of collaboration on several comparable objects in the monument must be provided. For the employees to be employed, proof of qualified skilled tradesman training must be provided and comparable objects on which the respective employee has worked must be named. If the minimum requirements mentioned are not met, the offer will not be considered. Evidence must be submitted when the offer is submitted.

Description: Public tender Vob/a Delivery and assembly of a sales container III The sales container is to consist of two L-shaped steel containers put together and covered with wood. The stand is used at events to sell food and drinks and is to serve as a shelter in bad weather. A counter with a sink, several refrigerators and work surfaces are planned for the sales area. The relevant connections (electricity and water) must also be planned for. Furthermore, fold-up windows are to be provided for the counter area, which can also be used as a canopy in an emergency. Two glass doors are to mark the entrance to the "guest room", and another is required for access to the counter area. Two floor-to-ceiling windows are also planned.

Details: Completion of balance work for under construction of multipurpose hall on Retail Lab in Govt. Sen. Sec. School Bharari, Tehsil Ghumarwin distt. Bilaspur H.P. (SH- P/L Cement concerete 1:4:8, Cement concrete 1:1.5:3, form work , steel work, wood work, Plastering, distempering and painting etc.).

Details: Repair and maintenance of (Type-I qtr. No.-1 to 4) (Type-II qtr. No. 1 to 4 , 5 to 8 , 9 to 12 Block A , 13 to 16 ) ,( Type-III qtr. No. 3 to 4 , 5 to 8 ) for general pooled accommodation at Hardaspura Distt. Chamba (SH- Painting wrok , wood work , shutter work , etc. )