Wood Tenders

Details: Description 1 Wooden Office Table 1.4 Meter Long With 4 Drawers 1 Center Drawer; 3 Side Drawers And 1 Side Cabinet For Extension Office 5 Sets

Details: Description Part I Other General Requirements B.3(1) Permits And Clearances L.s. 1.00 B.5(1) Project Billboard/signboard Each 2.00 B.7(1) Occupational Safety And Health Program L.s. 1.00 Total Cost (part I) Carried To Summary Php Part Ii Civil, Mechanical, Electrical And Sanitary/plumbing Works Part A Earthworks 800 (2) Clearing And Grubbing L.s. 1.00 803(1)a Structure Excavation (common Soil) Cu.m. 63.89 804(1)a Embankment From Roadway/structure Excavation (common Soil) Cu.m. 36.87 804(2)a Embankment From Borrow (common Soil) Cu.m. 13.65 804(7) Gravel Fill Cu.m. 13.63 Total Cost (part A) Carried To Summary Php Part B Plain And Reinforced Concrete Works 900(1)i Structural Concrete (class A, 28days) Cu.m. 60.08 902(1)a1 Reinforcing Steel (deformed)(grade 40) Kg. 9,257.85 903(2) Formworks And Falseworks Sq.m. 345.17 Total Cost (part B) Carried To Summary Php Part C Finishing And Other Civil Works 1046(2)a1 Chb Non Load Bearing (including Reinforcing Steel)(100mm) Sq.m. 287.49 1010(2)b Doors (wood Panel) Sq.m. 5.79 1043(1) Pvc Doors And Frames Sq.m. 2.52 1007(1)b Aluminum Framed Glass Door(swing Type) Sq.m. 11.76 1005(1) Residential Casement (steel) Sq.m. 7.74 1008(1)a Aluminum Glass Windows(sliding Type) Sq.m. 22.32 1008(1)c Aluminum Glass Windows(awning Type) Sq.m. 1.08 1003(17) Carpentry And Joinery (door Jambs) L.s. 1.00 1004(2) Finishing Hardware (locksets And Hinges) L.s. 1.00 1051(1)a Railing L.s. 1.00 1027(1) Cement Plaster Finish Sq.m. 491.07 1016(1)a Waterproofing (cement-base) Sq.m. 122.86 1003(1)a1 Ceiling (4.5mm, Metal Frame, Fiber Cement Board) Sq.m. 147.84 1018(1) Glazed Tiles And Trims Sq.m. 27.59 1018(2) Unglazed Tiles Sq.m. 124.25 1032(1)a Painting Works (masonry/concrete) Sq.m. 726.01 1032(1)b Painting Works (wood) Sq.m. 16.83 1032(1)c Painting Works (steel) Sq.m. 135.35 1014(1)a2 Pre-painted Metal Sheets (above 0.427mm. Corrugated, Long Span) Sq.m. 78.40 1013(2)a Fabricated Metal Roofing Accessory (gauge 26(0.551mm), Ridge/hip Rolls) Lm. 11.20 1013(2)b Fabricated Metal Roofing Accessory (gauge 26(0.551mm), Flashing) L.m. 14.40 1047(8)a Structural Steel (trusses) Kg. 904.77 1047(8)b Structural Steel (purlins) Kg. 919.99 1047(5)a Metal Structure Accessories (bolts And Rods) Kg 10.09 1047(5)d Metal Structure Accessories (steel Plates) Kg 50.87 1047(5)b Metal Structure Accessories (sagrods) Kg 18.74 1001(8) Sewer Line Works L.s. 1.00 1001(9) Storm Drainage And Downspout L.s. 1.00 1002(4) Plumbing Fixtures L.s. 1.00 1002(24) Cold Water Lines L.s. 1.00 1001(6) Catch Basin L.s. 1.00 Total Cost (part C) Carried To Summary Php Part D Electrical 1100(10) Conduits, Boxes & Fittings (conduit Works/conduit Rough-in) L.s. 1.00 1101(33) Wires And Wiring Devices L.s. 1.00 1102(1) Panelboard With Main & Branch Breakers L.s. 1.00 1103(1) Lighting Fixtures L.s. 1.00 Total Cost (part D) Carried To Summary Php Part E Mechanical 1200(1) Ventilating Equipment L.s. 1.00 Total Cost (part E) Carried To Summary Php

Details: Description Part Ii Other General Requirements B.5 Project Billboard/signboard B.7(2) Occupational Safety & Health Program B.9 Mobilization/demobilization Part Iii Civil,mechanical, Electrical And Sanitary/plumbing Works Part A Earthworks 801(1) Removal Of Structures And Obstruction 803(1)a Structure Excavation (common Soil) Part B Plain And Reinforced Concrete Works 900(1)c1 Structural Concrete (class A, 28 Days) 902(1)a Reinforcing Steel (deformed), Grade 40 903(2) Formworks And Falsework Part C Finishing C.1 Masonry Works 1046(2)a2 Chb Non-load Bearing Wall (including Reinforcing Steel) 125mm C.2 Finishing Works 1027(1) Cement Plaster Finish 1051(5) Metal Railing ( 50mm Dia. G.i. Pipe Handrail Fully Welded On Vertical Railing On 19mm Bar Stiffener) 1051(6) Stainless Railings & Other Accessories 1018(1) Glazed Tiles And Trims 1018(2) Unglazed Tiles C.3 Painting Works 1032(1)a Painting Works (masonry Painting) 1032(1)c Painting Works (steel) C.4 Roof Framing And Roofing Works 1014(1)b1 Prepainted Metal Sheets (long Span, 0.50mm Thk) 1013(2)a2 Fabricated Metal Roofing Accessory (flashing) 1013(2)b1 Fabricated Metal Roofing Accessory (gutter) 1047(2)a Structural Steel (trusses) 1047(2)b Structural Steel C.5 Ceiling Works 1003(1)a1 Ceiling(fiber Cement Board On Metal Frame) C.6 Wooden Doors & Windows 1010(4) Wooden Doors & Windows 1004(2) Finishing Hardware Part D Electrical 1100(10) Conduit, Boxes, And Fittings 1101(33) Wires And Wiring Devices 1102(1) Panel Board With Main & Branch Breakers 1103(1) Lighting Fixtures And Lamps Part E Mechancal/plumbing And Sanitary Works 1001(9) Storm Drainage And Downspout 1001(8) Sewer Line Works 1001(11) Septic Vault-concrete 1002(4) Plumbing Fixtures 1002(24) Cold Water Lines 1200(13) Airconditioning (package/split Type) 1200(2)b Oscillating (wall Fan)

Details: Description In Line With The Implementation Of The Proposed Project: Repair And Improvement Of Early Childhood Care And Development Center In Barangay Poblacion District Iv, Burauen, Leyte, The Bids And Awards Committee (bac) Hereby Invites All Qualified Suppliers To Submit Bids For The Supply Of Construction Materials Required For The Project. The Details Of The Required Materials Are As Follows: Item No. Qty Unit Description 1. 9.00 Pcs 2" X 3" X 10' Cocolumber Lumber 2. 1.00 Sheet 1/4" X 4' X 8' Marine Plywood With Icc Mark 3. 1.00 Kg Cwn 4" 4. 1.00 Kg Cwn 3" 5. 1.00 Kg Cwn 1 1/2" 6. 1.00 Pc 4' X 8' Tarpulin For Project Signboard 7. 1.00 Liter Qde Paint - White Color 8. 2.00 Pcs Paint Brush 2" 9. 2.00 Cu.m. Gravel Bedding 3/4" 10. 16.00 Pcs. 16 Mm. Ø Rsb 11. 15.00 Pcs. 12 Mm. Ø Rsb 12. 80.00 Pcs. 10 Mm. Ø Rsb 13. 20.00 Kls. Tie Wire No. 16 14. 50.00 Bags Portland Cement (type 1) 15. 5.00 Cu.m. 3/4" Gravel 16. 3.00 Cu.m. Coarse Sand 17. 64.00 Pcs 2" X 3" X 12' Coco Lumber 18. 32.00 Pcs 2" X 2" X 12' Coco Lumber 19. 6.00 Shts. 1/4" Ordinary Plywood (2 Use) 20. 3.00 Kls. Common Wire Nails 1- 1/2" 21. 14.00 Kls. Common Wire Nails 4" 22. 4.00 Kls. Common Wire Nails 3" 23. 50.00 Pcs 2''x2''x10' Ceiling Joist & Hangers Good Lumber 24. 7.00 Pcs 1/4''x4''x8' Marine Plywood 25. 3.00 Pcs 0.25m X 0.5m Ceiling Vent 26. 3.00 Mtrs 1'' Screen Wire 27. 1.00 Pcs 3/4''x4'x8' Plyboard Ordinary 28. 4.00 Kgs Common Wire Nails, 3" 29. 4.00 Kgs Common Wire Nails, 2 1/2" 30. 1.00 Kgs Concrete Nails, 3" 31. 3.00 Kgs Common Wire Nails, 1" 32. 267.00 Pcs 4" Chb 33. 38.00 Bags Portland Cement 34. 3.00 Cu.m. Sand 35. 20.00 Pcs 10mm. Ø Rsb 36. 5.00 Kgs Tie Wire No.16 37. 2.00 Pcs Pail Flush Type Toilet Bowl For Child 38. 1.00 Pcs Kitchen Sink W/ Complete Fittings And Accessories 39. 3.00 Pcs 4"x4" Pvc Floor Drain 40. 4.00 Length 4"x3.0m Pvc Pipe 41. 1.00 Pc 2"x4" Tee 42. 10.00 Length 2"x3.0m Pvc Pipe 43. 4.00 Pcs. 2"dia.x90˚ Pvc Bend Elbow 44. 2.00 Pcs. 4"dia.x90˚ Pvc Bend Elbow 45. 2.00 Pcs. 2" Dia. Pvc P-trap 46. 40.00 Meters 1/2" Hdpe Pipe 47. 3.00 Pcs. 1/2" Dia. Gate Valve 48. 6.00 Pcs. 1/2"x90˚ Bend Elbow 49. 5.00 Pcs. 1/2" Tee 50. 5.00 Pcs. 1/2" Faucets, Hosebib, Brass 51. 3.00 Rolls 3/4" Teflon Tape 52. 21.00 Pcs Ga. 26 X 10' Corr. G.i. Sheet (.50mm) 53. 2.00 Pcs Ga. 26 X 10' Ridge Roll,big (.50mm) 54. 2.00 Pcs Ga. 26 X 8' Flashing,big (.50mm) 55. 10.00 Pcs. 1/2"x 12"x 8' Hardisanepa 56. 6.00 Pcs C - Purlins 2" X 4" X 20' 57. 6.00 Pcs. 1/4"x2"x 2"x6m Angle Bar 58. 10.00 Pcs 1/4"x1 1/2"x1 1/2" Angle Bar 59. 1000.00 Pcs Texcrew 3" 60. 1.00 Ltrs. Vulcaseal 61. 3.00 Packs Welding Rod 62. 15.00 Pcs. .60cmx.60cm Glazed Tile 63. 160.00 Pcs 20cm X 20cm Glazed Tiles 64. 110.00 Kls. 20cm X 20cm Unglazed Tiles 65. 7.00 Kls. Tile Groute 66. 4.00 Pcs. Tile Trim 67. 10.00 Bags Portland Cement 68. 2.00 Cu.m. Sand 69. 1.00 Sets ( 1.0mx2.10m Panel Door 70. 1.00 Sets (0.90mx2.10m) Flush Door 71. 4.00 Sets 3-1/2''x3-1/2'' Loose Pin Hinges 72. 4.00 Pcs. 1/2''x3"-1/2'' Double Action Spring Hinge 73. 1.00 Sets 1.20x1.20 Jalousie Window On Standard Aluminum Housing W/ 6mm Thk. Clear Glass On 50x150mm Hard Wood Jamb 74. 3.00 Sets 0.60x0.65 Jalousie Window On Standard Aluminum Housing W/ 6mm Thk. Clear Glass On 50x150mm Hard Wood Jamb 75. 2.00 Pcs. Heavy Duty Door Knob 76. 50.00 Mtrs #12 Thhn Stranded Wire 77. 50.00 Mtrs #14 Thhn Stranded Wire 78. 100.00 Mtrs Moldflex 1/2" 79. 4.00 Pcs. Big Electrical Tape 80. 5.00 Set 18 Watts Led Bulb 81. 2.00 Pcs 1 Gang Switch With Cover 82. 2.00 Pcs 2 Gang Duplex Convenience Outlet With Cover 83. 3.00 Pcs 4" Porcelain Lighting Outlet 84. 5.00 Pcs 2"x4" Pvc Utility Box 85. 2.00 Pcs 4" X 4" Pvc Junction Box 86. 3.00 Gals Latex Paint, White Flat 87. 2.00 Gals Enamel Paint, White Flat 88. 2.00 Gals Roof Paint, Gloss Spanish Red 89. 1.00 Gals Semi-gloss Latex, Ready Mixed ( Yellow ) 90. 3.00 Gals Semi-gloss Latex, Ready Mixed (green) 91. 2.00 Gals Semi-glosss Latex, Ready Mixed (blue) 92. 1.00 Gals Semi-gloss Latex, Ready Mixed ( Pink) 93. 1.00 Gals Semi-gloss Latex, Ready Mixed ( Apricot White) 94. 2.00 Gals Enamel Paint, White Semi-gloss 95. 1.00 Ltr. Burger Brown 96. 1.00 Gals Paint Thinner 97. 20.00 Shts Sand Paper # 120 98. 2.00 Pcs Paint Roller, 7'' With Pan 99. 2.00 Pcs Baby Roller 100. 2.00 Pcs Paint Brush, 4'' 101. 2.00 Pcs Paint Brush, 2'' 102. 2.00 Pcs Paint Brush, 1'' 103. 2.00 Gals Red Oxide 104. 1.00 Ltrs Concrete Neutralizer 105. 8.00 Pcs Construction Hard Hat 106. 8.00 Pairs Rubber Boots 107. 8.00 Pairs Heavy Duty Hand Gloves 108. 3.00 Box Face Mask 109. 1.00 Units 2'x4' Tarpaulin For Warning Signs 110. 1.00 Pcs 30cmx40cm Project Marker ( Made Of Marble )

Details: Description Cluster A - Php 278,015.00 1. 40 Pcs Heavy Duty Crates (61.5 Cm L, 42.5 Cm W, 31.5cm H) 2. 3 Pcs Fork Hoe, Heavy-duty, 23 Cm, W/out Handle 3. 10 Pcs Grab Hoe, 23 Cm Cm, W/out Handle 23 Cm, 4. 2 Pcs Round Point Shovel No. 2 For Gardening And Digging With D Handle ( Pala) 39.5 Inch 5. 1 Pcs Soil/compost Thermometer 6. 3 Pcs Garden Hose, 1" Braided, Green, 300 Ml/roll 7. 3 Pcs Hdpe Hose (sdr 11, 1", Black, 300 M/roll 8. 2 Pcs Wheel Barrow, 13 X3" Wheel Size 9. 54 Pcs Seedling Trays , 32 Holes 10. 1 Pcs Heavy-duty Weighing Scale (100 Kls. Capacity) 11. 2 Pcs Weighing Scale (10 Kls. Capacity) 12. 1 Pcs Stationary Heavy-duty Power Sprayer With Fitting And A Grip 16 Pcs Pcm 50kgs./sack 13. 2 Pcs Manual Knapsack Sprayer , 16 Liters, Pvc 14. 3 Pcs Grass Cutter, Type: 4-stroke, Ohc, Single Cylinder, Displacement: 35.8 Cm (2.18 Cu In), Bore X Stroke: 39.0 X 30.0 Mm (1.5 X 1.2 In), Net Power (sae J1349) * 1: 1.0 Kw (1.4 Ps) @ 7,000 Rpm 15. 2 Pcs Hand Tiller/cultivator 7.5 Hp, Gasoline Engine Industrial Rotary Tiller Machine Cultivator Power Weeder, With Complete Accessories, Model Mt909, Body Size 16. 2 Pcs Shredder: Specs: Yamada Chaff Cutter Gcc600 Rotary Speed: 1100rpm Matched Power:engine: 6.5hp Capacity:800kg/hr 17. 5 Pcs Greenhouse Plastic - .04 Mil. Thickness - Standard Size, Per Roll - 60kg/roll Cluster B - Php 942,100.00 1. 26 Unit Hand Tiller/cultivator 7.5 Hp, Gasoline Engine Industrial Rotary Tiller Machine Cultivator Power Weeder, With Complete Accessories Hand Tractor Tilling Machine, Model Mt909, Body Size (mm) 1390 X 800 X1070, Tilling Depth, 150-300 Mm, Gear Shifting -1,0,2,1, Driving Mode – Belt, Gearbox Oil Capacity (l) 1.1, Engine Model, D73f, Max. Power Hp (kw)/rpm -5.0(3.7)/3600 N.w/g.w (kg) – 88/100, With Complete Accessories (diesel) 2. 15 Unit Driven Power Sprayer, Model Gh700+bs25a Plunge Size 22 Mm. Spraying Pressure (psi) 300-500 Spraying Volume (l/min): 25 Fuel: Gasoline Type Single Cuclinder, 4 Stroke, Air Cooled, Ohv, Starting System : Recoil Start 3. 1 Unit Diesel Water Pump Booster 4x4" 10 Hp Engine Type" Diesel Model Nb80kb-4k, Inlet Diameter: 4" Outlet Diameter: 4" Suction Max. 8m Head Max: 28 M Flow Rate :80 (m3/h) Dimension 66x48x61 Cm With Complete Set 4. 1 Unit Stationary Power Sprayer, 6.5 Hp Gasoline/ Electric Motor With Sprayer Set (nozzle & Hose), Rod (lance), Pump-engine Base, Pulley, Strainer, 100m Hose, Intake Hose, Belt, Pulley, (complete Set) Original Kawasaki 100 Meters 5. 2 Roll 100 M Power Sprayer Hose Used For Belt Driven Power Sprayers Japan Quality 8.5mm X 100 Meters Standard Size For Any Brand Of Power Sprayer Pump With Fittings And Grip 6. 3 Roll Hose For Power Sprayer Yellow Color, 1/2", 100m/with Nozzle (complete Set) Japan Quality Cluster C - Php 165,750.00 1. 22 Rolls Rainbow Hose / Garden Hose, ½ ‘’ X 90m, Braided Hose Red/green, High Quality 2. 1 Roll 5/8 Inch Green Hose Braided 50m 3. 2 Unit Kawasaki Power Sprayer Hose 100m 100 Meters For Power Sprayer With Fittings And Grip • Used For Belt Driven Power Sprayers • Japan Quality • High Pressure Hose 8.5mm X 100meters • Standard Size For Any Brand Of Power Sprayer Pump • With Fittings And Grip" 4. 2 Unit Power Sprayer Hose 100m 100 Meters For Power Sprayer With Fittings And Grip *used For Belt Driven Power Sprayers *japan Quality *high Pressure Hose 8.5mm" 5. 1 Roll Rubber Garden Hose 1 • Heavy Duty Garden Hose • Braided High Pressure Water Hose - 60 Meters / Roll 6. 3 Rolls 1" Black Hose "class A", 60 Meters/roll 7. 4 Rolls Class “a” Garden Hose, 1 ‘‘, Black 300m/roll 8. 1 Roll Hdpe Hose, Sdr-11 1/2" Black 300m/roll 9. 1 Roll Hdpe Hose , Sdr-11, ½ ‘, Black, 200m / Roll 10. 2 Rolls Rubber Garden Hose 3/4”, Braided High Pressure, 60 Meters / Roll 11. 3 Roll Hdpe Hose 3/4' Sdr -11 Black, 300 M/roll 12. 1 Roll High Pressure Hose, 8.5 Mm, 3 Ply, .50 M 13. 7 Roll Rainbow Hose / Garden Hose 3/4” X 60m Braided Pvc Hose, High Quality" 14. 2 Roll Hdpe Hose, Sdr 11, 3/4”, 150 M/roll 15. 2 Roll Black Hose, ¾” , 1 Roll (60 M) 16. 9 Pcs Rotating Rocker Sprinkler With ½ Male Thread 17. 1 Pc. Big Plastic Drum, 10-15 Drums Capacity, Colored Blue Cluster D - Php 409,200.00 1. 40 Sacks 16-16-16 Fertilizer (50 Kg / Sack) Unik 2. 57 Sacks 14-14-14 Fertilizer (50 Kg / Sack) 3. 25 Sacks 46-0-0 Urea (50 Kg / Sack)vera 4. 38 Sacks Processed Chicken Manure (50kg/ Sack) 5. 2 Sacks Nitrabor (15.4, N +18.3 Ca+0.3b)- 50kg/sack 6. 2 Sacks Winner 15-9-20+mg+s+mn+b+zn (50kg/sack) 7. 10 Sacks Bio-organic Ocean Fertilizer 8. 1 Sacks Duofus Granules 20 Kgs./sack 9. 1 Sacks Furamax 3g (50 Kgs./bag) Nematode 10. 10 Pcs Rotating Rocker Sprinker, 1/2" Male 11. 1 Pcs Round Point Shovel No. 2 For Gardening 12. 1 Pcs Fork Grab Hoe, Heavy Duty, 23 Cm, Metal Handle 13. 14 Pc Grab Hoe, Heavy Duty, 23 Cm, Metal Handle 14. 4 Roll G. I. Tie Wire "16, 25 Kls/roll Cluster E- Php 201,900.00 1. 24 Unit Grass Cutter ● Type: 4-stroke, Ohc, Single Cylinder ● Displacement: 35.8 Cm (2.18 Cu In) ● Bore X Stroke: 39.0 X 30.0 Mm (1.5 X 1.2 In) ● Net Power (sae J1349) * 1: 1.0 Kw (1.4 Ps) @ 7,000 Rpm ● Maximum Net Torque (sae J1349): 1.6 N-m (0.16 Kgf-m, 1.2 Lbf-ft) @ 5,500 Rpm ● Compression Ratio: 8.0 : 1 ● Fuel Consumption: 360 G / Kwh (265 G / Hph, 0.584 Lb / Hph) ● Ignition System: 27° B.t.d.c (fixed) ● Lubrication System: Oil Mist ● Oil Capacity: 0.1 L (3.4 Us Oz, 3.5 Imp Oz) ● Starting System: Recoil Starter ● Air Cleaner: Semi-dry Type ● Fuel Used: Gasoline With A Pump Octane Rating Of 86 Or Higher ● Fuel Tank Capacity: 0.65 L (0.17 Us Gal, 0.14 Imp Gal) ● Dimensions (l X W X H): 1,928 X 637 X 444 Mm (75.9 X 25.1 X 17.5 In) ● Weight: 7.49 Kg (16.5 Lbs) 2. 12 Unit Knapsack 2n1 Sprayer (battery & Manual Operated), 16 Liters Capacity (complete Set) 3. 1 Unit Knapsack 2n1 Sprayer (battery & Manual Operated), 18 Liters Capacity (complete Set) 4. 2 Unit Knapsack Sprayer, 20 Liters Cap. Electric And Manual With Complete Set, Pressure-release Safety Valve, Iso9001 Compliant Cluster F - Php 88,400.00 1. 1 Unit Inverter Welding Machine Portable Input Voltage V:1 220-240, Frequency Hz: 50/60, Output Current A: 15-315, Duty Cycle:315a 60, Led Display, No Load Voltage V:83, Max Output Current A:315, Diameter Of Electrode Mm:1 6-4, With 1 Pcs Electrode Holder With Cable, With 1 Pcs Earth Clamp With Cable, With 1 Pcs Wire Brush And Wielding Helmet 2. 1 Unit Original Jiigsaw 580 Watts, Stroke Rate 3100 Spm, Cutting Depth 50 Mm-80 Mm 3. 1 Unit Original Angle Grinder, 220-240 V, Rated Input 1,400 W, Main Handle, Disc Diameter 125 Mm, W 2.2 Kg, Bore Diameter 22, 2m 4. 1 Unit Professional Electric Planer, Gho 750w Portable Electric Planer, Width 82 Mm, Planning Depth 1.6 Mm, Weight 2.7 5 1 Unit Electric Jack Hammer • Voltage:220-240v~50/60hz • Input Power:1700w • Impact Rate:1400bmp • Impact Force:50j • Hex Chuck System • 16kgs Demolition Breaker 6. 1 Unit Planer W/ Complete Accessories • Rated Input Power: 710 W • Planing Width: 82 Mm • Planing Depth: 0 – 1 Mm • Weight: 2.5 Kg • Adjustable Rebating Depth: 0 – 9 Mm • No-load Speed: 16,500 Rpm • Sound Pressure Level: 84 Db.(a) • Sound Power Level: 95 Db.(a) 7. 1 Unit Hand Drill (cordless) • Drill 12v Li-ion 3/8"" With Accessories Kit Set • Voltage: 12v • No Load Speed (rpm): 0-400 / 0-1500 • Torque: 26nm Chuck: 3/8"" (10mm) Torque Positions: 20 • Impacts Per Minute: 0-22,500 Ipm • Drilling Capacity: Wood 20mm / Metal 10mm / Concrete 8mm • Battery Type: Sliding • Weight: 1k 8. 1 Unit Portable Welding Machine W/ Complete Accessories • (1blt) Inverter Technology • Rated Voltage: 220-240v • No Load Voltage: 56v • Kmma-350a 9. 1 Unit Speed Cutter W/ Complete Accessories • Rated Input Power: 2,200 W • Cutting Disc Diameter: 355 Mm • Cutting Disc Bore: 25.4 Mm • No-load Speed: 3,800 Rpm • Cutting Capacity At 0º: O 100 X 196 Mm Rectangle O 119 X 119 Mm At Square O 130 X 130 Mm At L-profile • Weight: 15 Kg • Cutting Capacity At 45º Mitre: O 107 X 115 Mm At Rectangle O 110 X 110 Mm At Square O 115 X 115 Mm At L-profile 10. 1 Unit Rooter Machine With Complete Accessories • Voltage:220-240v~50/60hz • Input Power:1600w • No-load Speed:22000rpm • Collet Size:6mm,8mm,12mm,1/4"",1/2"" • Plunge Capacity:0-60mm • With 1pcs Guide Holder • With 1pcs Template Guide • With 1pcs Trimmer Guide • With 1pcs Straight Guide • With 1 Set Extra Carbon Brushes Cluster G - Php 287,720.00 1. 20 Rolls Plastic Cellophane (greenhouse) .04 Mil 50kg/roll 2. 18 Kls Plastic Cellophane (greenhouse) .04 Mil 3. 3 Rolls Plastic Sheet, Green House,.05 Mil, 21 Ft Width 150 M Length, Anti Vu, 50kg/roll 4. 3 Rolls Plastic Cellophane, .04 Mil For Greenhouse, Anti Uv, 9 Ft. M Width X 100 M Length/roll 5. 50 Kls Plastic Cellophane, Anti-uv Treated, 9 Ft W, 50m Length, .005 Mil 6. 100 Kls Uv Plastic Sheet (6 Mil-150 Microns) 3m Width And 100 Meters Length/roll (green House) 7. 3 Rolls Plastic Sheet, Green House .06 Mil, 20 Ft Width 150m Length, Anti Uv 8. 3 Rolls Garden Net, Black (2.5m X 50m)

Details: Description 10 Pc Universal Socket Adapter 70.00 700.00 Specs: 10a-wua-002 1 Pc Power Extension Cord 3,000.00 3,000.00 Specs: 40 Meters Heavy Duty, 250v 1 Pc Paper Cutter Metal & Wood Base 10,000.00 10,000.00 Compatible With A4 A3 A5 B3 B4 B5 Paper/photo Paper Heavy Duty 2 Pcs Multi-purpose Extnesion Cord 1,600.00 3,200.00 6-gang, 10 Meters 5 Unit Document Scanner 50,000.00 250,000.00 Specs: At Least 80-sheet Automatic Document Feeder (adf) 2-sided Scanning Up To 80ipm Optical Character Recognition (ocr) Optimise Workflows With Kofax, Newsoft And Scanessentials Software Connect And Scan Using Usb 3.0, Usb Host, Wi-fi And Network 10.9cm Touchscreen Delivery Period: 15 Days Mode Of Payment: Cheque Total ₱266,900.00

Description: New construction of a cafeteria with multifunctional use in wood-hybrid construction and underground car park: scaffolding

Details: Description Part I Other General Requirements B.3(1) Permits And Clearances L.s. 1.00 B.5(1) Project Billboard/signboard Each 2.00 B.7(1) Occupational Safety And Health Program L.s. 1.00 Total Cost (part I) Carried To Summary Php Part Ii Civil, Mechanical, Electrical And Sanitary/plumbing Works Part A Earthworks 800 (2) Clearing And Grubbing L.s. 1.00 803(1)a Structure Excavation (common Soil) Cu.m. 63.89 804(1)a Embankment From Roadway/structure Excavation (common Soil) Cu.m. 36.87 804(2)a Embankment From Borrow (common Soil) Cu.m. 13.65 804(7) Gravel Fill Cu.m. 13.63 Total Cost (part A) Carried To Summary Php Part B Plain And Reinforced Concrete Works 900(1)i Structural Concrete (class A, 28days) Cu.m. 60.08 902(1)a1 Reinforcing Steel (deformed)(grade 40) Kg. 9,257.85 903(2) Formworks And Falseworks Sq.m. 353.64 Total Cost (part B) Carried To Summary Php Part C Finishing And Other Civil Works 1046(2)a1 Chb Non Load Bearing (including Reinforcing Steel)(100mm) Sq.m. 287.49 1010(2)b Doors (wood Panel) Sq.m. 5.79 1043(1) Pvc Doors And Frames Sq.m. 2.52 1007(1)b Aluminum Framed Glass Door(swing Type) Sq.m. 11.76 1005(1) Residential Casement (steel) Sq.m. 7.74 1008(1)a Aluminum Glass Windows(sliding Type) Sq.m. 22.32 1008(1)c Aluminum Glass Windows(awning Type) Sq.m. 1.08 1003(17) Carpentry And Joinery (door Jambs) L.s. 1.00 1004(2) Finishing Hardware (locksets And Hinges) L.s. 1.00 1051(1)a Railing L.s. 1.00 1027(1) Cement Plaster Finish Sq.m. 491.07 1016(1)a Waterproofing (cement-base) Sq.m. 122.86 1003(1)a1 Ceiling (4.5mm, Metal Frame, Fiber Cement Board) Sq.m. 147.84 1018(1) Glazed Tiles And Trims Sq.m. 27.59 1018(2) Unglazed Tiles Sq.m. 124.25 1032(1)a Painting Works (masonry/concrete) Sq.m. 726.01 1032(1)b Painting Works (wood) Sq.m. 16.83 1032(1)c Painting Works (steel) Sq.m. 135.35 1014(1)a2 Pre-painted Metal Sheets (above 0.427mm. Corrugated, Long Span) Sq.m. 78.40 1013(2)a Fabricated Metal Roofing Accessory (gauge 26(0.551mm), Ridge/hip Rolls) Lm. 11.20 1013(2)b Fabricated Metal Roofing Accessory (gauge 26(0.551mm), Flashing) L.m. 14.40 1047(8)a Structural Steel (trusses) Kg. 904.77 1047(8)b Structural Steel (purlins) Kg. 919.99 1047(5)a Metal Structure Accessories (bolts And Rods) Kg 10.09 1047(5)d Metal Structure Accessories (steel Plates) Kg 50.87 1047(5)b Metal Structure Accessories (sagrods) Kg 18.74 1001(8) Sewer Line Works L.s. 1.00 1001(9) Storm Drainage And Downspout L.s. 1.00 1002(4) Plumbing Fixtures L.s. 1.00 1002(24) Cold Water Lines L.s. 1.00 1001(6) Catch Basin L.s. 1.00 Total Cost (part C) Carried To Summary Php Part D Electrical 1100(10) Conduits, Boxes & Fittings (conduit Works/conduit Rough-in) L.s. 1.00 1101(33) Wires And Wiring Devices L.s. 1.00 1102(1) Panelboard With Main & Branch Breakers L.s. 1.00 1103(1) Lighting Fixtures L.s. 1.00 Total Cost (part D) Carried To Summary Php Part E Mechanical 1200(1) Ventilating Equipment L.s. 1.00 Total Cost (part E) Carried To Summary Php

Details: Description 12 Pieces - Plaques Of Appreciation (glass Finish With Glass Base And Blue Glass Backing, Micro Etching Letters, Size: 10") 40 Pieces - Wooden Frame Certificate Holder A4

Description: Scrap Seats, Births And Luggage Stands Of Coaches Of Sort And Size With Attachment Of Foam, Rubber Rexine, Wooden And Non Ferrous If Any.[ Bin No. 62]