Website Tenders

Details: Description Invitation To Bid For Construction Of Solar Powered Pump With Ai Satellite-assisted Monitoring And Fertigation System For Zds Imo Projects (cluster 1) The National Irrigation Administration – Regional Office Ix Bac, Through The Cy 2025 National Expenditure Program (nep) For General Appropriation Act (gaa) 2025 Fund, Invites Contractors To Submit Bids For The Following Contract: Contract Reference No. : Niar9-egpipcluster12025-018 (infra) Project Name : Zamboanga Del Sur Imo Projects Contract Location : Zamboanga Del Sur Scope Of Works : Construction Of Solar Powered Pump With Ai Satellite-assisted Monitoring And Fertigation System (cluster 1) Approved Budget For The Contract (abc) : Php 141,525,729.76 Contract Duration : 240 Calendar Days Amount Of Bidding Documents : Php 50,000.00 The Nia – Ro9 Bac Is Conducting A Public Bidding For This Contract In Accordance With Republic Act 9184, Otherwise Known As The “government Procurement Reform Act” And Its Revised Implementing Rules And Regulations (rirr). To Be Eligible To Bid For The Above-stated Contract, A Contractor Must Meet The Following Major Requirements: (a) Filipino Citizen Or 60% Filipino-owned Partnership/corporation; (b) Completion Of A Similar Contract Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To Abc. Interested Bidders Are Required To Submit Two (2) Valid Ids Of The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc. Updated Company Profile Shall Also Be Submitted And Presented To The Nia-r9 Bac Secretariat Upon Purchased Of The Bidding Documents. Credit Line Commitment Shall No Longer Be Accepted As An Alternative To The Prospective Bidder’s Computation Of Nfcc Per Gppb Resolution No. 20-2013 Dated July 30, 2013. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion In The Eligibility Check, Preliminary Evaluation Of Bids, Post Qualification, And Award. The Significant Times And Deadlines Of Procurement Activities Are Shown Below: Issuance Of Bidding Documents : January 9 – 15, 2025 At 8:30 Am Pre-bid Conference : January 16, 2025 At 9:00 Am Submission Of Bids : January 28, 2025 At 8:30 Am Opening Of Bids : January 28, 2025 At 9:00 Am Interested Bidders May Obtain Further Information From Nia – Ro9 Bac And Inspect The Bidding Documents At The Address Given Below Starting January 9 – 28, 2025. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents Prescribed In The Above-mentioned List Of Projects. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Only The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc Shall Be Authorized To Purchase And Submit Bidding Documents. The Use Of Special Power Of Attorney (spa) Is Prohibited As Per Nia Memorandum Circular No.52 Series 2014 Dated December 1, 2014. The Nia – Ro9 Bac Will Hold A Pre-bid Conference On 16 January 2025 At 9:00 Am At Conference Room, National Irrigation Administration – Regional Office Ix, Regional Center, Balintawak, Pagadian City, Which Shall Be Open To All Interested Parties. Bids Must Be Duly Received By The Bac Secretariat Thru Manual Submission At The Office Address As Indicated Below On Or Before 28 January 2025 At 08:30 Am. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb. Clause 18.1. Bids Will Be Opened In The Presence Of The Bidder’s Authorized Managing Officer Or Authorized Liaison Officer Of Interested Parties At The Address Below. The Nia – Ro9 Bac Additional Guidelines Is The Conduct Of Site Inspection To Be Scheduled During Pre-bid Conference. • The Certificate Of Site Inspection Shall Be Issued And Signed By The Nia R9 Authorized Representative After The Activity, Which Shall Be Required To Include In The Bid Tender (technical Component). Prospective Bidders Shall Submit Their Sealed Envelopes Together With The Duly Accomplished Forms As Provided In The Bd’s On Or Before The Deadline Of Dropping Of The Bid Documents At The Nia – Ro9 Bac By The Authorized Managing Officer (amo) Or Authorized Liaison Officer Indicated In The Submitted Company Profile/crc Of The Parties. The Liaison Officer Shall Submit A Letter From The Amo Authorizing Her/him To Drop Their Bid, Attend The Bidding Process And Also Submit A Copy Of Company I.d. For Verification. No Special Power Of Attorney (spa) Shall Be Allowed. The Procuring Entity Shall Not Be Held Responsible Of Any And All Bid Documents/proposals Losses. All Interested Contractors/bidders Must Inform The Bac Chairperson Thru Its Secretariat Of Their Documents Submitted In Any Means Provided Above Before The Date Of The Bid Opening To Avoid Late Submission. The Nia – Ro9 Bac Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders, In Accordance With The Provisions Of Section 41 Of Ra 9184 And Its Irr. Pursuant To Nia Memorandum Circular No. 119 S. 2020, Subject: Policy On Utilization Of Videoconferencing, Webcasting Or Similar Technology In The Conduct Of Public Procurement Activities, Procurement Proceedings For The Above Mention Contracts Will Be Held Through Face-to-face Meeting In Combination With Video Conferencing Using Google Meet Thru The Links: Pre-bidding Conference : Https://meet.google.com/mhf-qztj-ggs Opening Of Bids : Https://meet.google.com/qdi-eomz-cfs 5.2 For This Purpose, Contracts Similar To The Project Refer To Contracts Which Have The Same Major Categories Of Work, Which Shall Be: Completed For The Past Five (5) Years. • Well Drilling, Supply/installation Of Pump Irrigation Projects With Mechanical, Irrigation & Flood Control And Electrical Works To Be Eligible To Bid For The Contract, Bidders Must Have Done A Single Largest Completed Contract (slcc) Containing A Category Of Work Which Is The Same As Or Similar To The Major Category Of Works, And Who’s Total Slcc Cost Is At Least 50% Of The Approved Budget For The Contract (abc) To Be Bid. The Above Slcc Must Be Supported By A Copy Of The Contract, Certificate Of Completion, And Owner’s Certificate Of Final Acceptance (1-year After The Issuance Of The Certificate Of Completion) Issued By The Project Owner Other Than The Contractor Or A Final Rating Of At Least Satisfactory In The Constructors Performance Evaluation System (cpes). In Case Of Contracts With The Private Sector, An Equivalent Document Shall Be Submitted. 10.3 A Valid Pcab License Is Required, And In Case Of Joint Ventures, A Valid Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project. Interested Bidders Shall Have At Least Or Any Equivalent To Pcab Size Range “medium B” Category: “a”, Sp-wd (well-drilling Work), Sp-ee (electrical Works), And Sp-me (mechanical Works). Additional Valid Certificate Of Well Driller Registration Issued By The National Water Resources Board (nwrb) Will Be Evaluated. 10.4 The Key Personnel Must Meet The Required Minimum Years Of Experience Set Below: Key Personnel Relevant Experience General Experience Number Project Engineer 3 Years A Licensed Civil Engineer. Experienced In Solar Powered Irrigation Projects. Shall Render Full-time Service To The Project Until Completion. 5 Years 9 Office Engineer 3 Years A Licensed Civil Engineer. Shall Render Full-time Service To The Project Until Completion. 5 Years 1 Materials Engineer 3 Years Shall Be An Accredited Material Engineer Of Dpwh. Shall Render Service To The Project As Required. 5 Years 1 Foreman 5 Years Experienced In Solar Powered Irrigation Projects. Shall Render Full-time Service To The Project Until Completion. 5 Years 9 Safety & Health Officer (so2) 3 Years Shall Have At Least 3 Years’ Experience In Construction Industry. Completed Cosh Training And Shall Render Fulltime Service To The Project Until Completion. 3 Years 9 Geologist 3 Years A Licensed Geologist With Experience In Solar Powered Irrigation Projects. Shall Render Service To The Project As Required. 5 Years 1 Electrical Engineer 3 Years A Licensed Electrical Engineer With Experience In Solar Powered Irrigation Projects. Shall Render Service To The Project As Required. 5 Years 1 Mechanical Engineer 3 Years A Licensed Mechanical Engineer With Experience In Solar Powered Irrigation Projects. Shall Render Service To The Project As Required. 5 Years 1 The Contractor May Assign Other Support Personnel From Those Listed For The Optimal Performance Of The Project Construction Team. The Support Personnel Shall Undertake The Required Day-to-day Site Or Office-related Activities Of The Contractor. Full Time Services Mean, The Personnel Involved Shall Render Minimum Of Eight (8) Hours A Day Or Forty (40) Hour A Week And Shall Be Available Upon Request Of The Procuring Entity. 10.5 The Minimum Major Equipment Requirements Are The Following: Equipment Capacity No. Of Units Crawler Type Drilling Rig (rotary Or Hydraulic Driven) 100m 3 Compressor 160 Cfm 3 Generator Set 15kva 3 Water Pump (for Pump Testing) 15hp 3 Dump Truck 10 Cu.m. 3 Dump Truck 4 Cu.m. 3 Welding Machine 300a 9 Concrete Mixer 1-bagger 3 Concrete Vibrator 5hp 3 Butt Fusion Machine Up To 2” Diameter 3 Service Vehicle 4x4 Pick-up 1 Geo-resistivity Equipment (multi-electrode) Up To 100m Depth 1 Survey Instrument 1 Set Initial Equipment Requirement Upon Mobilization: Equipment Capacity No. Of Units Crawler Type Drilling Rig (rotary Or Hydraulic Driven) 100m 3 Dump Truck 10 Cu.m. 3 Dump Truck 4 Cu.m. 3 Service Vehicle 4x4 Pick-up 1 Geo-resistivity Equipment (multi-electrode) Up To 100m Depth 1 Survey Instrument 1 Set The Proof Of Ownership Of Equipment Requirements Are Copies Of Current Lto Official Receipt (or) And Certificate Of Registration (cr) Of The Equipment Which Should Be Attached Together With The Affidavit Of Ownership. In Case Of Leased Equipment, A Lease Contract And Affidavit Of Commitment Or Certificate Of Availability Of Equipment Should Be Submitted With The Lessor/owner As The Pledger Of The Equipment, Stating Therein That The Equipment Will Be Available For The Whole Duration Of The Project. For Purchase Agreement, The Description Of The Equipment To Be Purchased Such As Brand/model, Type Of Equipment, Motor No., Body No. And The Capacity Must Be Indicated In The Document, Otherwise, The Bac Will Not Honor The Purchase Agreement And The Bidder Will Be Declared As Non-complying. Likewise, List Of Contractor’s Major Equipment Units Pledged To Be Used For The Project Must Be Supported By Proof Of Ownership If It Is Owned, Lease Agreement If It Is Being Leased And Purchase Agreement If To Be Purchased. A Certification Of Availability Of Equipment For The Duration Of The Project Must Also Be Provided By The Equipment Owner And/or Lessor/vendor. The Bidder Should Also Specify In The Submitted Bid The Location Of The Equipment Where It Can Be Inspected. If Any Piece Of Equipment Is Not In The Specified Location, Then The Bidder Shall Be Post-disqualified. Item No. Description Qty Unit Package 1: Dipolo Ris – Php 28,215,173.24 A Construction Of Two (2) Unit 15hp Solar Pv Submersible Pumping System @ 80m Depth Mobilization And Demobilization, Temporary Facilities And Construction Of Safety And Health Program Mobilization And Demobilization 1.00 Ls Temporary Facilities Construction Of Worker Shed/bodega (5 X 4 Meters) 1.00 Ls Construction Of Project Billboard 2.00 Units B Construction Safety And Health Program 1.00 Ls C Well Drilling 160.00 Ln. M D Well Casing And Well Development Well Development 2.00 Unit Gravel Pack/gravel Filter 2.60 Cu.m. Supply And Delivery Of 8" ⌀ Upvc Pipe X 6m 160.00 Ln. M Installation Of 8" ⌀ Upvc Pipe X 6m 160.00 Ln. M E Pumping Test (specification Of Pump To Be Procured Is Based On The Result Of Pumping Test) Pump Test (using 15hp Pump) 2.00 Lot F Supply, Delivery And Installation Of Submersible Pump, Piping & Accessories Supply And Delivery Submersible Pump (15hp) 2.00 Set Flow Meter 2.00 Assy 4" Hydraulic Control Valve 2.00 Assy Pipes And Fittings 2.00 Lot Installation Installation Of Submersible Pump (15hp), Flow Meter, Hydraulic Control Valve, And Pipes And Fittings 2.00 Lot G Solar Panel Supply And Delivery Pv Modules (solar Panel 600watts) 64.00 Pc Mc4 Connector 120.00 Pair Dc Cable From Pv String (1x4mm²) 376.00 M Ac Cable (8.0 Mm²) 376.00 M 2" ⌀ Rsc Conduit 376.00 M Grounding 2.00 Lot Installation Installation Of Pv Modules, Conduits, Cables And Accessories 2.00 Lot H Inverter & Control Panel Inverter And Control Panel Supply & Delivery 2.00 Lot Installation 2.00 Lot I Mounting Structures Mounting Structure Supply ,delivery And Fabrication 2.00 Lot Installation 2.00 Lot Structure Excavation(manual) 8.64 Cu.m Structure Backfill (manual) 4.86 Cu.m Class "a" Concrete 4.32 Cu.m Gravel Blanket 46.04 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 667.92 Kgs Cut, Bend And Place 667.92 Kgs Painting Works 9.00 Sq.m J Ai Satellite Assisted Monitoring System Ai Satellite Assisted Monitoring System Supply & Delivery 2.00 Lot Installation 2.00 Lot K Fertigation System Fertigation System & Accessories Supply & Delivery 2.00 Lot Installation 2.00 Lot L Distribution Pipes Hdpe Iso4427 Sdr 21 2" Dia X 6m Supply & Delivery 174.00 Pc Installation 174.00 Pc Pipes And Fittings 2.00 Lot 4" Layflat Pipe(including End Connectors) Supply & Delivery 11.00 Roll Installation 11.00 Roll 3" Layflat Pipe (including End Connectors) Supply & Delivery 10.00 Roll Installation 10.00 Roll 2" Layflat Pipe (including End Connectors) Supply & Delivery 10.00 Roll Installation 10.00 Roll M Construction Of Perimeter Fence,stilling Pool And Nia Logo Structure Excavation(manual) 27.38 Cu.m Structure Backfill (manual) 10.28 Cu.m Class "a" Concrete 61.36 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 2,073.22 Kg Cut, Bend And Place 2,073.22 Kg Masonry Works 4" Thk. Chb (laying & Plastering Of Both Sides) 68.56 Sq.m Cyclone Chain Wire 206.10 Ln.m 2" Ø G.i Pipe( Sch. 40) 350.40 Ln.m Painting Works 21.28 Sq.m Water Proofing 176.00 Sq.m Gravel Blanket 6.62 Cu.m. Red Oxide Metal Primer 0.54 Sq.m N Construction Of Control House Structure Excavation(manual) 6.44 Cu.m Structure Backfill (manual) 2.34 Cu.m Class "a" Concrete 8.66 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 828.50 Kg Cut, Bend And Place 828.50 Kg Masonry Works 4" Thk. Chb (laying & Plastering Of Both Sides) 50.96 Sq.m Painting Works 143.38 Sq.m Water Proofing 24.50 Sq.m Gravel Blanket 2.14 Cu.m. Package 2: Salug Ris – Php 14,124,344.00 A Construction Of Two (2) Unit 15hp Solar Pv Submersible Pumping System @ 80m Depth Mobilization And Demobilization, Temporary Facilities And Construction Of Safety And Health Program Mobilization And Demobilization 1.00 Ls Temporary Facilities Construction Of Worker Shed/bodega ( 5 X 4 Meters) 1.00 Ls Construction Of Project Billboard 2.00 Units B Construction Safety And Health Program 1.00 Ls C Well Drilling 80.00 Ln. M D Well Casing And Well Development Well Development 1.00 Unit Gravel Pack/gravel Filter 1.30 Cu.m. Supply And Delivery Of 8" ⌀ Upvc Pipe X 6m 80.00 Ln. M Installation Of 8" ⌀ Upvc Pipe X 6m 80.00 Ln. M E Pumping Test (specification Of Pump To Be Procured Is Based On The Result Of Pumping Test) Pump Test (using 15hp Pump) 1.00 Lot F Supply, Delivery And Installation Of Submersible Pump, Piping & Accessories Supply And Delivery Submersible Pump (15hp) 1.00 Set Flow Meter 1.00 Assy 4" Hydraulic Control Valve 1.00 Assy Pipes And Fittings 1.00 Lot Installation Installation Of Submersible Pump (15hp), Flow Meter, Hydraulic Control Valve, And Pipes And Fittings 1.00 Lot G Solar Panel Supply And Delivery Pv Modules (solar Panel 600watts) 32.00 Pc Mc4 Connector 60.00 Pair Dc Cable From Pv String (1x4mm²) 188.00 M Ac Cable (8.0 Mm²) 188.00 M 2" ⌀ Rsc Conduit 188.00 M Grounding 1.00 Lot Installation Installation Of Pv Modules, Conduits, Cables And Accessories 1.00 Lot H Inverter & Control Panel Inverter And Control Panel Supply & Delivery 1.00 Lot Installation 1.00 Lot I Mounting Structures Mounting Structure Supply ,delivery And Fabrication 1.00 Lot Installation 1.00 Lot Structure Excavation(manual) 4.32 Cu.m Structure Backfill (manual) 2.43 Cu.m Class "a" Concrete 2.16 Cu.m Gravel Blanket 23.02 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 333.96 Kgs Cut, Bend And Place 333.96 Kgs Painting Works 4.50 Sq.m J Ai Satellite Assisted Monitoring System Ai Satellite Assisted Monitoring System Supply & Delivery 1.00 Lot Installation 1.00 Lot K Fertigation System Fertigation System & Accessories Supply & Delivery 1.00 Lot Installation 1.00 Lot L Distribution Pipes Hdpe Iso4427 Sdr 21 2" Dia X 6m Supply & Delivery 77.00 Pc Installation 77.00 Pc Pipes And Fittings 1.00 Lot 4" Layflat Pipe(including End Connectors) Supply & Delivery 5.00 Roll Installation 5.00 Roll 3" Layflat Pipe (including End Connectors) Supply & Delivery 3.00 Roll Installation 3.00 Roll 2" Layflat Pipe (including End Connectors) Supply & Delivery 2.00 Roll Installation 2.00 Roll M Construction Of Perimeter Fence,stilling Pool And Nia Logo Structure Excavation(manual) 13.69 Cu.m Structure Backfill (manual) 5.14 Cu.m Class "a" Concrete 30.68 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 1,036.61 Kg Cut, Bend And Place 1,036.61 Kg Masonry Works 4" Thk. Chb (laying & Plastering Of Both Sides) 34.28 Sq.m Cyclone Chain Wire 103.05 Ln.m 2" Ø G.i Pipe( Sch. 40) 175.20 Ln.m Painting Works 10.64 Sq.m Water Proofing 88.00 Sq.m Gravel Blanket 3.31 Cu.m. Red Oxide Metal Primer 0.27 Sq.m N Construction Of Control House Structure Excavation(manual) 3.22 Cu.m Structure Backfill (manual) 1.17 Cu.m Class "a" Concrete 4.33 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 414.25 Kg Cut, Bend And Place 414.25 Kg Masonry Works 4" Thk. Chb (laying & Plastering Of Both Sides) 25.48 Sq.m Painting Works 71.69 Sq.m Water Proofing 12.25 Sq.m Gravel Blanket 1.07 Cu.m. Package 3: Labangan Ris – Php 14,075,712.81 A Construction Of Two (2) Unit 15hp Solar Pv Submersible Pumping System @ 80m Depth Mobilization And Demobilization, Temporary Facilities And Construction Of Safety And Health Program Mobilization And Demobilization 1.00 Ls Temporary Facilities Construction Of Worker Shed/bodega ( 5 X 4 Meters) 1.00 Ls Construction Of Project Billboard 2.00 Units B Construction Safety And Health Program 1.00 Ls C Well Drilling 80.00 Ln. M D Well Casing And Well Development Well Development 1.00 Unit Gravel Pack/gravel Filter 1.30 Cu.m. Supply And Delivery Of 8" ⌀ Upvc Pipe X 6m 80.00 Ln. M Installation Of 8" ⌀ Upvc Pipe X 6m 80.00 Ln. M E Pumping Test (specification Of Pump To Be Procured Is Based On The Result Of Pumping Test) Pump Test (using 15hp Pump) 1.00 Lot F Supply, Delivery And Installation Of Submersible Pump, Piping & Accessories Supply And Delivery Submersible Pump (15hp) 1.00 Set Flow Meter 1.00 Assy 4" Hydraulic Control Valve 1.00 Assy Pipes And Fittings 1.00 Lot Installation Installation Of Submersible Pump (15hp), Flow Meter, Hydraulic Control Valve, And Pipes And Fittings 1.00 Lot G Solar Panel Supply And Delivery Pv Modules (solar Panel 600watts) 32.00 Pc Mc4 Connector 60.00 Pair Dc Cable From Pv String (1x4mm²) 188.00 M Ac Cable (8.0 Mm²) 188.00 M 2" ⌀ Rsc Conduit 188.00 M Grounding 1.00 Lot Installation Installation Of Pv Modules, Conduits, Cables And Accessories 1.00 Lot H Inverter & Control Panel Inverter And Control Panel Supply & Delivery 1.00 Lot Installation 1.00 Lot I Mounting Structures Mounting Structure Supply ,delivery And Fabrication 1.00 Lot Installation 1.00 Lot Structure Excavation(manual) 4.32 Cu.m Structure Backfill (manual) 2.43 Cu.m Class "a" Concrete 2.16 Cu.m Gravel Blanket 23.02 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 333.96 Kgs Cut, Bend And Place 333.96 Kgs Painting Works 4.50 Sq.m J Ai Satellite Assisted Monitoring System Ai Satellite Assisted Monitoring System Supply & Delivery 1.00 Lot Installation 1.00 Lot K Fertigation System Fertigation System & Accessories Supply & Delivery 1.00 Lot Installation 1.00 Lot L Distribution Pipes Hdpe Iso4427 Sdr 21 2" Dia X 6m Supply & Delivery 77.00 Pc Installation 77.00 Pc Pipes And Fittings 1.00 Lot 4" Layflat Pipe(including End Connectors) Supply & Delivery 5.00 Roll Installation 5.00 Roll 3" Layflat Pipe (including End Connectors) Supply & Delivery 3.00 Roll Installation 3.00 Roll 2" Layflat Pipe (including End Connectors) Supply & Delivery 2.00 Roll Installation 2.00 Roll M Construction Of Perimeter Fence,stilling Pool And Nia Logo Structure Excavation(manual) 13.69 Cu.m Structure Backfill (manual) 5.14 Cu.m Class "a" Concrete 30.68 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 1,036.61 Kg Cut, Bend And Place 1,036.61 Kg Masonry Works 4" Thk. Chb (laying & Plastering Of Both Sides) 34.28 Sq.m Cyclone Chain Wire 103.05 Ln.m 2" Ø G.i Pipe( Sch. 40) 175.20 Ln.m Painting Works 10.64 Sq.m Water Proofing 88.00 Sq.m Gravel Blanket 3.31 Cu.m. Red Oxide Metal Primer 0.27 Sq.m N Construction Of Control House Structure Excavation(manual) 3.22 Cu.m Structure Backfill (manual) 1.17 Cu.m Class "a" Concrete 4.33 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 414.25 Kg Cut, Bend And Place 414.25 Kg Masonry Works 4" Thk. Chb (laying & Plastering Of Both Sides) 25.48 Sq.m Painting Works 71.69 Sq.m Water Proofing 12.25 Sq.m Gravel Blanket 1.07 Cu.m. Package 4 - Campo Iv Pip: Php 14,101,468.25 A Construction Of Two (2) Unit 15hp Solar Pv Submersible Pumping System @ 80m Depth Mobilization And Demobilization, Temporary Facilities And Construction Of Safety And Health Program Mobilization And Demobilization 1.00 Ls Temporary Facilities Construction Of Worker Shed/bodega ( 5 X 4 Meters) 1.00 Ls Construction Of Project Billboard 2.00 Units B Construction Safety And Health Program 1.00 Ls C Well Drilling 80.00 Ln. M D Well Casing And Well Development Well Development 1.00 Unit Gravel Pack/gravel Filter 1.30 Cu.m. Supply And Delivery Of 8" ⌀ Upvc Pipe X 6m 80.00 Ln. M Installation Of 8" ⌀ Upvc Pipe X 6m 80.00 Ln. M E Pumping Test (specification Of Pump To Be Procured Is Based On The Result Of Pumping Test) Pump Test (using 15hp Pump) 1.00 Lot F Supply, Delivery And Installation Of Submersible Pump, Piping & Accessories Supply And Delivery Submersible Pump (15hp) 1.00 Set Flow Meter 1.00 Assy 4" Hydraulic Control Valve 1.00 Assy Pipes And Fittings 1.00 Lot Installation Installation Of Submersible Pump (15hp), Flow Meter, Hydraulic Control Valve, And Pipes And Fittings 1.00 Lot G Solar Panel Supply And Delivery Pv Modules (solar Panel 600watts) 32.00 Pc Mc4 Connector 60.00 Pair Dc Cable From Pv String (1x4mm²) 188.00 M Ac Cable (8.0 Mm²) 188.00 M 2" ⌀ Rsc Conduit 188.00 M Grounding 1.00 Lot Installation Installation Of Pv Modules, Conduits, Cables And Accessories 1.00 Lot H Inverter & Control Panel Inverter And Control Panel Supply & Delivery 1.00 Lot Installation 1.00 Lot I Mounting Structures Mounting Structure Supply ,delivery And Fabrication 1.00 Lot Installation 1.00 Lot Structure Excavation(manual) 4.32 Cu.m Structure Backfill (manual) 2.43 Cu.m Class "a" Concrete 2.16 Cu.m Gravel Blanket 23.02 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 333.96 Kgs Cut, Bend And Place 333.96 Kgs Painting Works 4.50 Sq.m J Ai Satellite Assisted Monitoring System Ai Satellite Assisted Monitoring System Supply & Delivery 1.00 Lot Installation 1.00 Lot K Fertigation System Fertigation System & Accessories Supply & Delivery 1.00 Lot Installation 1.00 Lot L Distribution Pipes Hdpe Iso4427 Sdr 21 2" Dia X 6m Supply & Delivery 77.00 Pc Installation 77.00 Pc Pipes And Fittings 1.00 Lot 4" Layflat Pipe(including End Connectors) Supply & Delivery 5.00 Roll Installation 5.00 Roll 3" Layflat Pipe (including End Connectors) Supply & Delivery 3.00 Roll Installation 3.00 Roll 2" Layflat Pipe (including End Connectors) Supply & Delivery 2.00 Roll Installation 2.00 Roll M Construction Of Perimeter Fence,stilling Pool And Nia Logo Structure Excavation(manual) 13.69 Cu.m Structure Backfill (manual) 5.14 Cu.m Class "a" Concrete 30.68 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 1,036.61 Kg Cut, Bend And Place 1,036.61 Kg Masonry Works 4" Thk. Chb (laying & Plastering Of Both Sides) 34.28 Sq.m Cyclone Chain Wire 103.05 Ln.m 2" Ø G.i Pipe( Sch. 40) 175.20 Ln.m Painting Works 10.64 Sq.m Water Proofing 88.00 Sq.m Gravel Blanket 3.31 Cu.m. Red Oxide Metal Primer 0.27 Sq.m N Construction Of Control House Structure Excavation(manual) 3.22 Cu.m Structure Backfill (manual) 1.17 Cu.m Class "a" Concrete 4.33 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 414.25 Kg Cut, Bend And Place 414.25 Kg Masonry Works 4" Thk. Chb (laying & Plastering Of Both Sides) 25.48 Sq.m Painting Works 71.69 Sq.m Water Proofing 12.25 Sq.m Gravel Blanket 1.07 Cu.m. Package 5 - Sta. Cruz Boniao Cis: Php 14,210,411.77 A Construction Of Two (2) Unit 15hp Solar Pv Submersible Pumping System @ 80m Depth Mobilization And Demobilization, Temporary Facilities And Construction Of Safety And Health Program Mobilization And Demobilization 1.00 Ls Temporary Facilities Construction Of Worker Shed/bodega ( 5 X 4 Meters) 1.00 Ls Construction Of Project Billboard 2.00 Units B Construction Safety And Health Program 1.00 Ls C Well Drilling 80.00 Ln. M D Well Casing And Well Development Well Development 1.00 Unit Gravel Pack/gravel Filter 1.30 Cu.m. Supply And Delivery Of 8" ⌀ Upvc Pipe X 6m 80.00 Ln. M Installation Of 8" ⌀ Upvc Pipe X 6m 80.00 Ln. M E Pumping Test (specification Of Pump To Be Procured Is Based On The Result Of Pumping Test) Pump Test (using 15hp Pump) 1.00 Lot F Supply, Delivery And Installation Of Submersible Pump, Piping & Accessories Supply And Delivery Submersible Pump (15hp) 1.00 Set Flow Meter 1.00 Assy 4" Hydraulic Control Valve 1.00 Assy Pipes And Fittings 1.00 Lot Installation Installation Of Submersible Pump (15hp), Flow Meter, Hydraulic Control Valve, And Pipes And Fittings 1.00 Lot G Solar Panel Supply And Delivery Pv Modules (solar Panel 600watts) 32.00 Pc Mc4 Connector 60.00 Pair Dc Cable From Pv String (1x4mm²) 188.00 M Ac Cable (8.0 Mm²) 188.00 M 2" ⌀ Rsc Conduit 188.00 M Grounding 1.00 Lot Installation Installation Of Pv Modules, Conduits, Cables And Accessories 1.00 Lot H Inverter & Control Panel Inverter And Control Panel Supply & Delivery 1.00 Lot Installation 1.00 Lot I Mounting Structures Mounting Structure Supply ,delivery And Fabrication 1.00 Lot Installation 1.00 Lot Structure Excavation(manual) 4.32 Cu.m Structure Backfill (manual) 2.43 Cu.m Class "a" Concrete 2.16 Cu.m Gravel Blanket 23.02 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 333.96 Kgs Cut, Bend And Place 333.96 Kgs Painting Works 4.50 Sq.m J Ai Satellite Assisted Monitoring System Ai Satellite Assisted Monitoring System Supply & Delivery 1.00 Lot Installation 1.00 Lot K Fertigation System Fertigation System & Accessories Supply & Delivery 1.00 Lot Installation 1.00 Lot L Distribution Pipes Hdpe Iso4427 Sdr 21 2" Dia X 6m Supply & Delivery 77.00 Pc Installation 77.00 Pc Pipes And Fittings 1.00 Lot 4" Layflat Pipe(including End Connectors) Supply & Delivery 5.00 Roll Installation 5.00 Roll 3" Layflat Pipe (including End Connectors) Supply & Delivery 3.00 Roll Installation 3.00 Roll 2" Layflat Pipe (including End Connectors) Supply & Delivery 2.00 Roll Installation 2.00 Roll M Construction Of Perimeter Fence,stilling Pool And Nia Logo Structure Excavation(manual) 13.69 Cu.m Structure Backfill (manual) 5.14 Cu.m Class "a" Concrete 30.68 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 1,036.61 Kg Cut, Bend And Place 1,036.61 Kg Masonry Works 4" Thk. Chb (laying & Plastering Of Both Sides) 34.28 Sq.m Cyclone Chain Wire 103.05 Ln.m 2" Ø G.i Pipe( Sch. 40) 175.20 Ln.m Painting Works 10.64 Sq.m Water Proofing 88.00 Sq.m Gravel Blanket 3.31 Cu.m. Red Oxide Metal Primer 0.27 Sq.m N Construction Of Control House Structure Excavation(manual) 3.22 Cu.m Structure Backfill (manual) 1.17 Cu.m Class "a" Concrete 4.33 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 414.25 Kg Cut, Bend And Place 414.25 Kg Masonry Works 4" Thk. Chb (laying & Plastering Of Both Sides) 25.48 Sq.m Painting Works 71.69 Sq.m Water Proofing 12.25 Sq.m Gravel Blanket 1.07 Cu.m. Package 6 - Dagohoy Cis: Php 14,205,997.44 A Construction Of Two (2) Unit 15hp Solar Pv Submersible Pumping System @ 80m Depth Mobilization And Demobilization, Temporary Facilities And Construction Of Safety And Health Program Mobilization And Demobilization 1.00 Ls Temporary Facilities Construction Of Worker Shed/bodega ( 5 X 4 Meters) 1.00 Ls Construction Of Project Billboard 2.00 Units B Construction Safety And Health Program 1.00 Ls C Well Drilling 80.00 Ln. M D Well Casing And Well Development Well Development 1.00 Unit Gravel Pack/gravel Filter 1.30 Cu.m. Supply And Delivery Of 8" ⌀ Upvc Pipe X 6m 80.00 Ln. M Installation Of 8" ⌀ Upvc Pipe X 6m 80.00 Ln. M E Pumping Test (specification Of Pump To Be Procured Is Based On The Result Of Pumping Test) Pump Test (using 15hp Pump) 1.00 Lot F Supply, Delivery And Installation Of Submersible Pump, Piping & Accessories Supply And Delivery Submersible Pump (15hp) 1.00 Set Flow Meter 1.00 Assy 4" Hydraulic Control Valve 1.00 Assy Pipes And Fittings 1.00 Lot Installation Installation Of Submersible Pump (15hp), Flow Meter, Hydraulic Control Valve, And Pipes And Fittings 1.00 Lot G Solar Panel Supply And Delivery Pv Modules (solar Panel 600watts) 32.00 Pc Mc4 Connector 60.00 Pair Dc Cable From Pv String (1x4mm²) 188.00 M Ac Cable (8.0 Mm²) 188.00 M 2" ⌀ Rsc Conduit 188.00 M Grounding 1.00 Lot Installation Installation Of Pv Modules, Conduits, Cables And Accessories 1.00 Lot H Inverter & Control Panel Inverter And Control Panel Supply & Delivery 1.00 Lot Installation 1.00 Lot I Mounting Structures Mounting Structure Supply ,delivery And Fabrication 1.00 Lot Installation 1.00 Lot Structure Excavation(manual) 4.32 Cu.m Structure Backfill (manual) 2.43 Cu.m Class "a" Concrete 2.16 Cu.m Gravel Blanket 23.02 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 333.96 Kgs Cut, Bend And Place 333.96 Kgs Painting Works 4.50 Sq.m J Ai Satellite Assisted Monitoring System Ai Satellite Assisted Monitoring System Supply & Delivery 1.00 Lot Installation 1.00 Lot K Fertigation System Fertigation System & Accessories Supply & Delivery 1.00 Lot Installation 1.00 Lot L Distribution Pipes Hdpe Iso4427 Sdr 21 2" Dia X 6m Supply & Delivery 83.00 Pc Installation 83.00 Pc Pipes And Fittings 1.00 Lot 4" Layflat Pipe(including End Connectors) Supply & Delivery 5.00 Roll Installation 5.00 Roll 3" Layflat Pipe (including End Connectors) Supply & Delivery 3.00 Roll Installation 3.00 Roll 2" Layflat Pipe (including End Connectors) Supply & Delivery 2.00 Roll Installation 2.00 Roll M Construction Of Perimeter Fence,stilling Pool And Nia Logo Structure Excavation(manual) 13.69 Cu.m Structure Backfill (manual) 5.14 Cu.m Class "a" Concrete 30.68 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 1,036.61 Kg Cut, Bend And Place 1,036.61 Kg Masonry Works 4" Thk. Chb (laying & Plastering Of Both Sides) 34.28 Sq.m Cyclone Chain Wire 103.05 Ln.m 2" Ø G.i Pipe( Sch. 40) 175.20 Ln.m Painting Works 10.64 Sq.m Water Proofing 88.00 Sq.m Gravel Blanket 3.31 Cu.m. Red Oxide Metal Primer 0.27 Sq.m N Construction Of Control House Structure Excavation(manual) 3.22 Cu.m Structure Backfill (manual) 1.17 Cu.m Class "a" Concrete 4.33 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 414.25 Kg Cut, Bend And Place 414.25 Kg Masonry Works 4" Thk. Chb (laying & Plastering Of Both Sides) 25.48 Sq.m Painting Works 71.69 Sq.m Water Proofing 12.25 Sq.m Gravel Blanket 1.07 Cu.m. Package 7 - San Miguel Pip: Php 14,183,248.07 A Construction Of Fourteen (14) Unit 15hp Solar Pv Submersible Pumping System @ 80m Depth Mobilization And Demobilization, Temporary Facilities And Construction Of Safety And Health Program Mobilization And Demobilization 1.00 Ls Temporary Facilities Construction Of Worker Shed/bodega ( 5 X 4 Meters) 1.00 Ls Construction Of Project Billboard 2.00 Units B Construction Safety And Health Program 1.00 Ls C Well Drilling 80.00 Ln. M D Well Casing And Well Development Well Development 1.00 Unit Gravel Pack/gravel Filter 1.30 Cu.m. Supply And Delivery Of 8" ⌀ Upvc Pipe X 6m 80.00 Ln. M Installation Of 8" ⌀ Upvc Pipe X 6m 80.00 Ln. M E Pumping Test (specification Of Pump To Be Procured Is Based On The Result Of Pumping Test) Pump Test (using 15hp Pump) 1.00 Lot F Supply, Delivery And Installation Of Submersible Pump, Piping & Accessories Supply And Delivery Submersible Pump (15hp) 1.00 Set Flow Meter 1.00 Assy 4" Hydraulic Control Valve 1.00 Assy Pipes And Fittings 1.00 Lot Installation Installation Of Submersible Pump (15hp), Flow Meter, Hydraulic Control Valve, And Pipes And Fittings 1.00 Lot G Solar Panel Supply And Delivery Pv Modules (solar Panel 600watts) 32.00 Pc Mc4 Connector 60.00 Pair Dc Cable From Pv String (1x4mm²) 188.00 M Ac Cable (8.0 Mm²) 188.00 M 2" ⌀ Rsc Conduit 188.00 M Grounding 1.00 Lot Installation Installation Of Pv Modules, Conduits, Cables And Accessories 1.00 Lot H Inverter & Control Panel Inverter And Control Panel Supply & Delivery 1.00 Lot Installation 1.00 Lot I Mounting Structures Mounting Structure Supply ,delivery And Fabrication 1.00 Lot Installation 1.00 Lot Structure Excavation(manual) 4.32 Cu.m Structure Backfill (manual) 2.43 Cu.m Class "a" Concrete 2.16 Cu.m Gravel Blanket 23.02 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 333.96 Kgs Cut, Bend And Place 333.96 Kgs Painting Works 4.50 Sq.m J Ai Satellite Assisted Monitoring System Ai Satellite Assisted Monitoring System Supply & Delivery 1.00 Lot Installation 1.00 Lot K Fertigation System Fertigation System & Accessories Supply & Delivery 1.00 Lot Installation 1.00 Lot L Distribution Pipes Hdpe Iso4427 Sdr 21 2" Dia X 6m Supply & Delivery 77.00 Pc Installation 77.00 Pc Pipes And Fittings 1.00 Lot 4" Layflat Pipe(including End Connectors) Supply & Delivery 5.00 Roll Installation 5.00 Roll 3" Layflat Pipe (including End Connectors) Supply & Delivery 3.00 Roll Installation 3.00 Roll 2" Layflat Pipe (including End Connectors) Supply & Delivery 2.00 Roll Installation 2.00 Roll M Construction Of Perimeter Fence,stilling Pool And Nia Logo Structure Excavation(manual) 13.69 Cu.m Structure Backfill (manual) 5.14 Cu.m Class "a" Concrete 30.68 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 1,036.61 Kg Cut, Bend And Place 1,036.61 Kg Masonry Works 4" Thk. Chb (laying & Plastering Of Both Sides) 34.28 Sq.m Cyclone Chain Wire 103.05 Ln.m 2" Ø G.i Pipe( Sch. 40) 175.20 Ln.m Painting Works 10.64 Sq.m Water Proofing 88.00 Sq.m Gravel Blanket 3.31 Cu.m. Red Oxide Metal Primer 0.27 Sq.m N Construction Of Control House Structure Excavation(manual) 3.22 Cu.m Structure Backfill (manual) 1.17 Cu.m Class "a" Concrete 4.33 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 414.25 Kg Cut, Bend And Place 414.25 Kg Masonry Works 4" Thk. Chb (laying & Plastering Of Both Sides) 25.48 Sq.m Painting Works 71.69 Sq.m Water Proofing 12.25 Sq.m Gravel Blanket 1.07 Cu.m. Package 8 - Bag-ong Baroy Spip: Php 14,213,268.46 A Construction Of Two (2) Unit 15hp Solar Pv Submersible Pumping System @ 80m Depth Mobilization And Demobilization, Temporary Facilities And Construction Of Safety And Health Program Mobilization And Demobilization 1.00 Ls Temporary Facilities Construction Of Worker Shed/bodega ( 5 X 4 Meters) 1.00 Ls Construction Of Project Billboard 2.00 Units B Construction Safety And Health Program 1.00 Ls C Well Drilling 80.00 Ln. M D Well Casing And Well Development Well Development 1.00 Unit Gravel Pack/gravel Filter 1.30 Cu.m. Supply And Delivery Of 8" ⌀ Upvc Pipe X 6m 80.00 Ln. M Installation Of 8" ⌀ Upvc Pipe X 6m 80.00 Ln. M E Pumping Test (specification Of Pump To Be Procured Is Based On The Result Of Pumping Test) Pump Test (using 15hp Pump) 1.00 Lot F Supply, Delivery And Installation Of Submersible Pump, Piping & Accessories Supply And Delivery Submersible Pump (15hp) 1.00 Set Flow Meter 1.00 Assy 4" Hydraulic Control Valve 1.00 Assy Pipes And Fittings 1.00 Lot Installation Installation Of Submersible Pump (15hp), Flow Meter, Hydraulic Control Valve, And Pipes And Fittings 1.00 Lot G Solar Panel Supply And Delivery Pv Modules (solar Panel 600watts) 32.00 Pc Mc4 Connector 60.00 Pair Dc Cable From Pv String (1x4mm²) 188.00 M Ac Cable (8.0 Mm²) 188.00 M 2" ⌀ Rsc Conduit 188.00 M Grounding 1.00 Lot Installation Installation Of Pv Modules, Conduits, Cables And Accessories 1.00 Lot H Inverter & Control Panel Inverter And Control Panel Supply & Delivery 1.00 Lot Installation 1.00 Lot I Mounting Structures Mounting Structure Supply ,delivery And Fabrication 1.00 Lot Installation 1.00 Lot Structure Excavation(manual) 4.32 Cu.m Structure Backfill (manual) 2.43 Cu.m Class "a" Concrete 2.16 Cu.m Gravel Blanket 23.02 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 333.96 Kgs Cut, Bend And Place 333.96 Kgs Painting Works 4.50 Sq.m J Ai Satellite Assisted Monitoring System Ai Satellite Assisted Monitoring System Supply & Delivery 1.00 Lot Installation 1.00 Lot K Fertigation System Fertigation System & Accessories Supply & Delivery 1.00 Lot Installation 1.00 Lot L Distribution Pipes Hdpe Iso4427 Sdr 21 2" Dia X 6m Supply & Delivery 77.00 Pc Installation 77.00 Pc Pipes And Fittings 1.00 Lot 4" Layflat Pipe(including End Connectors) Supply & Delivery 5.00 Roll Installation 5.00 Roll 3" Layflat Pipe (including End Connectors) Supply & Delivery 3.00 Roll Installation 3.00 Roll 2" Layflat Pipe (including End Connectors) Supply & Delivery 2.00 Roll Installation 2.00 Roll M Construction Of Perimeter Fence,stilling Pool And Nia Logo Structure Excavation(manual) 13.69 Cu.m Structure Backfill (manual) 5.14 Cu.m Class "a" Concrete 30.68 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 1,036.61 Kg Cut, Bend And Place 1,036.61 Kg Masonry Works 4" Thk. Chb (laying & Plastering Of Both Sides) 34.28 Sq.m Cyclone Chain Wire 103.05 Ln.m 2" Ø G.i Pipe( Sch. 40) 175.20 Ln.m Painting Works 10.64 Sq.m Water Proofing 88.00 Sq.m Gravel Blanket 3.31 Cu.m. Red Oxide Metal Primer 0.27 Sq.m N Construction Of Control House Structure Excavation(manual) 3.22 Cu.m Structure Backfill (manual) 1.17 Cu.m Class "a" Concrete 4.33 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 414.25 Kg Cut, Bend And Place 414.25 Kg Masonry Works 4" Thk. Chb (laying & Plastering Of Both Sides) 25.48 Sq.m Painting Works 71.69 Sq.m Water Proofing 12.25 Sq.m Gravel Blanket 1.07 Cu.m. Package 9 - Rebokon Cis: Php 14,196,105.72 A Construction Of Two (2) Unit 15hp Solar Pv Submersible Pumping System @ 80m Depth Mobilization And Demobilization, Temporary Facilities And Construction Of Safety And Health Program Mobilization And Demobilization 1.00 Ls Temporary Facilities Construction Of Worker Shed/bodega ( 5 X 4 Meters) 1.00 Ls Construction Of Project Billboard 2.00 Units B Construction Safety And Health Program 1.00 Ls C Well Drilling 80.00 Ln. M D Well Casing And Well Development Well Development 1.00 Unit Gravel Pack/gravel Filter 1.30 Cu.m. Supply And Delivery Of 8" ⌀ Upvc Pipe X 6m 80.00 Ln. M Installation Of 8" ⌀ Upvc Pipe X 6m 80.00 Ln. M E Pumping Test (specification Of Pump To Be Procured Is Based On The Result Of Pumping Test) Pump Test (using 15hp Pump) 1.00 Lot F Supply, Delivery And Installation Of Submersible Pump, Piping & Accessories Supply And Delivery Submersible Pump (15hp) 1.00 Set Flow Meter 1.00 Assy 4" Hydraulic Control Valve 1.00 Assy Pipes And Fittings 1.00 Lot Installation Installation Of Submersible Pump (15hp), Flow Meter, Hydraulic Control Valve, And Pipes And Fittings 1.00 Lot G Solar Panel Supply And Delivery Pv Modules (solar Panel 600watts) 32.00 Pc Mc4 Connector 60.00 Pair Dc Cable From Pv String (1x4mm²) 188.00 M Ac Cable (8.0 Mm²) 188.00 M 2" ⌀ Rsc Conduit 188.00 M Grounding 1.00 Lot Installation Installation Of Pv Modules, Conduits, Cables And Accessories 1.00 Lot H Inverter & Control Panel Inverter And Control Panel Supply & Delivery 1.00 Lot Installation 1.00 Lot I Mounting Structures Mounting Structure Supply ,delivery And Fabrication 1.00 Lot Installation 1.00 Lot Structure Excavation(manual) 4.32 Cu.m Structure Backfill (manual) 2.43 Cu.m Class "a" Concrete 2.16 Cu.m Gravel Blanket 23.02 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 333.96 Kgs Cut, Bend And Place 333.96 Kgs Painting Works 4.50 Sq.m J Ai Satellite Assisted Monitoring System Ai Satellite Assisted Monitoring System Supply & Delivery 1.00 Lot Installation 1.00 Lot K Fertigation System Fertigation System & Accessories Supply & Delivery 1.00 Lot Installation 1.00 Lot L Distribution Pipes Hdpe Iso4427 Sdr 21 2" Dia X 6m Supply & Delivery 83.00 Pc Installation 83.00 Pc Pipes And Fittings 1.00 Lot 4" Layflat Pipe(including End Connectors) Supply & Delivery 5.00 Roll Installation 5.00 Roll 3" Layflat Pipe (including End Connectors) Supply & Delivery 3.00 Roll Installation 3.00 Roll 2" Layflat Pipe (including End Connectors) Supply & Delivery 2.00 Roll Installation 2.00 Roll M Construction Of Perimeter Fence,stilling Pool And Nia Logo Structure Excavation(manual) 13.69 Cu.m Structure Backfill (manual) 5.14 Cu.m Class "a" Concrete 30.68 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 1,036.61 Kg Cut, Bend And Place 1,036.61 Kg Masonry Works 4" Thk. Chb (laying & Plastering Of Both Sides) 34.28 Sq.m Cyclone Chain Wire 103.05 Ln.m 2" Ø G.i Pipe( Sch. 40) 175.20 Ln.m Painting Works 10.64 Sq.m Water Proofing 88.00 Sq.m Gravel Blanket 3.31 Cu.m. Red Oxide Metal Primer 0.27 Sq.m N Construction Of Control House Structure Excavation(manual) 3.22 Cu.m Structure Backfill (manual) 1.17 Cu.m Class "a" Concrete 4.33 Cu.m Reinforcing Steel Bar Furnishing & Stockpilling 414.25 Kg Cut, Bend And Place 414.25 Kg Masonry Works 4" Thk. Chb (laying & Plastering Of Both Sides) 25.48 Sq.m Painting Works 71.69 Sq.m Water Proofing 12.25 Sq.m Gravel Blanket 1.07 Cu.m.

Details: Section A: Description this Is A Combined Synopsis/solicitation For Commercial Services Prepared In Accordance With The Format In Federal Acquisition Regulation (far) Subpart 12.6, Streamlined Procedures For Evaluation And Solicitation For Commercial Products And Commercial Services, In Conjunction With Far Part 13 As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested, And A Written Solicitation Document Will Not Be Issued. this Solicitation Is Issued As An Rfq, Number 36c24425q0230. The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2025-02 Effective 01/03/2025. The Complete Text Of Any Of The Clauses And Provisions May Be Accessed In Full Text At Far | Acquisition.gov. this Solicitation Is Being Competed On A Full And Open Competitive Basis. The Government Reserves The Right To Make Split Awards As A Result Of This Solicitation. the Associated North American Industrial Classification System (naics) Code For This Procurement Is 812332 Industrial Launders, With A Small Business Size Standard Of $47 Million. The Fsc/psc Is S209 - Housekeeping Laundry/drycleaning. complete Instructions For Submitting A Response To This Solicitation And Applicable Provisions And Clauses Are Found In 36c24425q0230. All Offerors Are Advised To Pay Careful Attention To The Quote Submission Instructions As There Are Very Specific Instructions As What Is Required To Be Provided. the Contract Period Of Performance (pop) Is Anticipated To Be 03/24/2025 Through 03/23/2030. Should Issuance Of The Award Occur On A Different Date, The Performance Period Will Be Adjusted Accordingly. any Award Resulting From This Solicitation Will Be Issued On A Standard Form 1449. note: To Receive An Award Resulting From This Solicitation, Offerors Must Be Registered In The System For Award Management (sam) Database. Registration May Be Done Online At: Www.acquisition.gov Or Www.sam.gov. section B: Statement Of Work the Pittsburgh, Pa Contracting Office Is Seeking Uniform Rental, Alteration And Laundering Services To Support The Wilkes Barre Va Medical Center, Located At 1111 East End Blvd., Wilkes Barre, Pa 18711. See Attached Statement Of Work (sow) For Complete Details. section C: Price Schedule all Interested Companies Shall Provide Quotations For The Following: supplies/services quantities Listed Are Estimates. While Week Is The Unit Of Measure In This Combined Synopsis, Vendors May Price The Work In Other Industry-wide Acceptable Units, Such As Lbs. line Item description quantity unit Of Measure unit Price total Price 0001 uniform Supply And Laundry Service In Accordance With Statement Of Work Year 1 52 wk 1001 uniform Supply And Laundry Service In Accordance With Statement Of Work Year 2 52 wk 2001 uniform Supply And Laundry Service In Accordance With Statement Of Work Year 3 52 wk 3001 uniform Supply And Laundry Service In Accordance With Statement Of Work Year 4 52 wk 4001 uniform Supply And Laundry Service In Accordance With Statement Of Work Year 5 52 wk place Of Performance: wilkes Barre Va Medical Center 1111 East End Blvd. wilkes Barre, Pa 18711 section D: Evaluation Of Quotations the Government Will Select The Quote That Represents The Best Benefit To The Government At A Price That Can Be Determined Reasonable. Specific Information To Be Included In Quotes Is Detailed Below In Instructions To Offerors Commercial Items . following Receipt Of Quotes, The Government Will Perform A Comparative Evaluation Of The Services Quoted In Accordance With Far 13.106-2(b)(3). The Government Will Compare Quotes To One Another To Select The Quote That Best Benefits The Government By Fulfilling The Requirement. additional Information Pertaining To Comparative Evaluation Is Below: What Comparative Evaluation Is: It Is The Direct Comparison Of One Quotation/offer With Another In A Uniform And Fair Manner To Determine Which Quote/offer Provides The Government What It Needs, Where And When, As Identified In The Rfq It Is An Assessment Of Which Response Is The Best As A Whole Once One Quotation/offer Is Found Acceptable, It Is Compared Side By Side To The Remaining Ones, And The Best One Is Chosen What Comparative Evaluation Is Not: It Does Not Individually Evaluate Quote/offers Against Specified Evaluation Factors It Does Not Assign A Rating Using A Color, Numerical, Or Other Rating Methodology Although The Process Is Not Prohibited, It Does Not Require Additional Evaluation To Determine If Minimal Advantage Is Worth A Minimal Or Normal Price Difference It Is Not A Low Price Technically Acceptable (lpta) Or Trade-off Process contractors May Submit More Than One Quote; However, Contractors Are Strongly Encouraged To Submit Their Best Technical Solutions And Prices In Response To This Request For Quote. All Quotes Must Be Submitted By The Deadline To Be Considered For Evaluation. the Government Reserves The Right To Not Select Any Quotes For Award. Additionally, The Government Reserves The Right To Cancel This Solicitation At Any Time Without Making Award. the Contractor Is Responsible For All Quote Preparation Costs, Which, Under No Circumstances, Will Be Paid Or Otherwise Provided For By The Government. once The Government Determines There Is/are A Contractor(s) That Can Provide A Service That Meet(s) The Requirements Of This Request For Quote, The Government Reserves The Right To Communicate With Only Those Contractors Quoting The Best-suited Service To Address Any Remaining Issues. the Contracting Officer Will Evaluate Technical Capability, Price, And Past Performance. section E: Clauses And Provisions the Full Text Of Far Provisions Or Clauses May Be Accessed Electronically At Http://acquisition.gov/comp/far/index.html. the Following Solicitation Provisions Apply To This Acquisition: far 52.212-1, Instructions To Offerors Commercial Products And Commercial Services (sep 2023) addendum To Far 52.212-1 Instructions To Offerors Commercial Products And Commercial Services offeror Must Ensure That Proposal Is Submitted Timely To Ensure Delivery And Receipt By The Due Date And Time Identified Herein. offer Shall Be Submitted Electronically Via Email, To Stephanie.mcfadden@va.gov. in Addition To The Requirements Of Far 52.212-1, Offeror Shall: (a) Complete Provision 52.212-3. Note: An Offeror Needs Only To Complete Paragraph If The Offeror Has Completed The Annual Representations And Certifications Electronically In The System For Award Management Database. Otherwise, Complete Paragraphs (c) Through (o) As Applicable. (b) Offeror Shall Submit A Capability Statement Demonstrating Their Technical Capability And Ability To Meet The Full Scope (all Elements) Of The Statement Of Work. (c) Offeror Shall Submit At Least One Similarly Scoped/relevant Past Performance Reference, Including Both The Reference Information And Details Of The Work Performance; Past Performance Information Shall Be Recent And Relevant Work. Offerors May Submit More Than One Past Performance Reference; Doing So Further Demonstrates The Offeror S Ability To Perform The Work. The Contracting Officer May Also Utilize All Available Records (e.g. Ppiprs And Fapiis) As Well. a Determination Of Contractor Responsibility Will Be Conducted. provisions That Are Incorporated By Reference (by Citation Number, Title, And Date), Have The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. the Following Provisions Are Incorporated Into 52.212-1 As An Addendum To This Solicitation: 52.252-1 Solicitation Provisions Incorporated By Reference (feb 1998) This Solicitation Incorporates One Or More Solicitation Provisions By Reference, With The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. The Offeror Is Cautioned That The Listed Provisions May Include Blocks That Must Be Completed By The Offeror And Submitted With Its Quotation Or Offer. In Lieu Of Submitting The Full Text Of Those Provisions, The Offeror May Identify The Provision By Paragraph Identifier And Provide The Appropriate Information With Its Quotation Or Offer. Also, The Full Text Of A Solicitation Provision May Be Accessed Electronically At This/these Address(es): Https://www.acquisition.gov/browse/index/far Https://www.va.gov/oal/library/vaar/ (end Of Provision) far Number title date 52.204-7 system For Award Management nov 2024 52.204-16 commercial And Government Entity Code Reporting aug 2020 52.229-11 tax On Certain Foreign Procurements Notice And Representation jun 2020 52.204-24 Representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment (nov 2021) The Offeror Shall Not Complete The Representation At Paragraph (d)(1) Of This Provision If The Offeror Has Represented That It Does Not Provide Covered Telecommunications Equipment Or Services As A Part Of Its Offered Products Or Services To The Government In The Performance Of Any Contract, Subcontract, Or Other Contractual Instrument In Paragraph (c)(1) In The Provision At 52.204 26, Covered Telecommunications Equipment Or Services Representation, Or In Paragraph (v)(2)(i) Of The Provision At 52.212 3, Offeror Representations And Certifications Commercial Products And Commercial Services. The Offeror Shall Not Complete The Representation In Paragraph (d)(2) Of This Provision If The Offeror Has Represented That It Does Not Use Covered Telecommunications Equipment Or Services, Or Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services In Paragraph (c)(2) Of The Provision At 52.204 26, Or In Paragraph (v)(2)(ii) Of The Provision At 52.212 3. definitions. As Used In This Provision Backhaul, Covered Telecommunications Equipment Or Services, Critical Technology, Interconnection Arrangements, Reasonable Inquiry, Roaming, And Substantial Or Essential Component Have The Meanings Provided In The Clause 52.204 25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment. (b) Prohibition. (1) Section 889(a)(1)(a) Of The John S. Mccain National Defense Authorization Act For Fiscal Year 2019 (pub. L. 115 232) Prohibits The Head Of An Executive Agency On Or After August 13, 2019, From Procuring Or Obtaining, Or Extending Or Renewing A Contract To Procure Or Obtain, Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services As A Substantial Or Essential Component Of Any System, Or As Critical Technology As Part Of Any System. Nothing In The Prohibition Shall Be Construed To (i) Prohibit The Head Of An Executive Agency From Procuring With An Entity To Provide A Service That Connects To The Facilities Of A Third-party, Such As Backhaul, Roaming, Or Interconnection Arrangements; Or (ii) Cover Telecommunications Equipment That Cannot Route Or Redirect User Data Traffic Or Cannot Permit Visibility Into Any User Data Or Packets That Such Equipment Transmits Or Otherwise Handles. (2) Section 889(a)(1)(b) Of The John S. Mccain National Defense Authorization Act For Fiscal Year 2019 (pub. L. 115 232) Prohibits The Head Of An Executive Agency On Or After August 13, 2020, From Entering Into A Contract Or Extending Or Renewing A Contract With An Entity That Uses Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services As A Substantial Or Essential Component Of Any System, Or As Critical Technology As Part Of Any System. This Prohibition Applies To The Use Of Covered Telecommunications Equipment Or Services, Regardless Of Whether That Use Is In Performance Of Work Under A Federal Contract. Nothing In The Prohibition Shall Be Construed To (i) Prohibit The Head Of An Executive Agency From Procuring With An Entity To Provide A Service That Connects To The Facilities Of A Third-party, Such As Backhaul, Roaming, Or Interconnection Arrangements; Or (ii) Cover Telecommunications Equipment That Cannot Route Or Redirect User Data Traffic Or Cannot Permit Visibility Into Any User Data Or Packets That Such Equipment Transmits Or Otherwise Handles. (c) Procedures. The Offeror Shall Review The List Of Excluded Parties In The System For Award Management (sam) (https://www.sam.gov) For Entities Excluded From Receiving Federal Awards For Covered Telecommunications Equipment Or Services. (d) Representations. The Offeror Represents That (1) It [ ] Will, [ ] Will Not Provide Covered Telecommunications Equipment Or Services To The Government In The Performance Of Any Contract, Subcontract Or Other Contractual Instrument Resulting From This Solicitation. The Offeror Shall Provide The Additional Disclosure Information Required At Paragraph (e)(1) Of This Section If The Offeror Responds Will In Paragraph (d)(1) Of This Section; And (2) After Conducting A Reasonable Inquiry, For Purposes Of This Representation, The Offeror Represents That It [ ] Does, [ ] Does Not Use Covered Telecommunications Equipment Or Services, Or Use Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services. The Offeror Shall Provide The Additional Disclosure Information Required At Paragraph (e)(2) Of This Section If The Offeror Responds Does In Paragraph (d)(2) Of This Section. (e) Disclosures. (1) Disclosure For The Representation In Paragraph (d)(1) Of This Provision. If The Offeror Has Responded Will In The Representation In Paragraph (d)(1) Of This Provision, The Offeror Shall Provide The Following Information As Part Of The Offer: (i) For Covered Equipment (a) The Entity That Produced The Covered Telecommunications Equipment (include Entity Name, Unique Entity Identifier, Cage Code, And Whether The Entity Was The Original Equipment Manufacturer (oem) Or A Distributor, If Known); (b) A Description Of All Covered Telecommunications Equipment Offered (include Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); And (c) Explanation Of The Proposed Use Of Covered Telecommunications Equipment And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(1) Of This Provision. (ii) For Covered Services (a) If The Service Is Related To Item Maintenance: A Description Of All Covered Telecommunications Services Offered (include On The Item Being Maintained: Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); Or (b) If Not Associated With Maintenance, The Product Service Code (psc) Of The Service Being Provided; And Explanation Of The Proposed Use Of Covered Telecommunications Services And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(1) Of This Provision. (2) Disclosure For The Representation In Paragraph (d)(2) Of This Provision. If The Offeror Has Responded Does In The Representation In Paragraph (d)(2) Of This Provision, The Offeror Shall Provide The Following Information As Part Of The Offer: (i) For Covered Equipment (a) The Entity That Produced The Covered Telecommunications Equipment (include Entity Name, Unique Entity Identifier, Cage Code, And Whether The Entity Was The Oem Or A Distributor, If Known); (b) A Description Of All Covered Telecommunications Equipment Offered (include Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); And (c) Explanation Of The Proposed Use Of Covered Telecommunications Equipment And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(2) Of This Provision. (ii) For Covered Services (a) If The Service Is Related To Item Maintenance: A Description Of All Covered Telecommunications Services Offered (include On The Item Being Maintained: Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); Or (b) If Not Associated With Maintenance, The Psc Of The Service Being Provided; And Explanation Of The Proposed Use Of Covered Telecommunications Services And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(2) Of This Provision. (end Of Provision) 52.204-26 Covered Telecommunications Equipment Or Services Representation (oct 2020) (a) Definitions. As Used In This Provision, Covered Telecommunications Equipment Or Services And Reasonable Inquiry Have The Meaning Provided In The Clause 52.204-25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment. (b) Procedures. The Offeror Shall Review The List Of Excluded Parties In The System For Award Management (sam) (https://www.sam.gov) For Entities Excluded From Receiving Federal Awards For Covered Telecommunications Equipment Or Services . (c) Representations. (1) The Offeror Represents That It [ ] Does, [ ] Does Not Provide Covered Telecommunications Equipment Or Services As A Part Of Its Offered Products Or Services To The Government In The Performance Of Any Contract, Subcontract, Or Other Contractual Instrument. (2) After Conducting A Reasonable Inquiry For Purposes Of This Representation, The Offeror Represents That It [ ] Does, [ ] Does Not Use Covered Telecommunications Equipment Or Services, Or Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services. (end Of Provision) 52.204-29 Federal Acquisition Supply Chain Security Act Orders Representation And Disclosures (dec 2023) (a) Definitions. As Used In This Provision, Covered Article, Fascsa Order, Intelligence Community, National Security System, Reasonable Inquiry, Sensitive Compartmented Information, Sensitive Compartmented Information System, And Source Have The Meaning Provided In The Clause 52.204 30, Federal Acquisition Supply Chain Security Act Orders Prohibition. (b) Prohibition. Contractors Are Prohibited From Providing Or Using As Part Of The Performance Of The Contract Any Covered Article, Or Any Products Or Services Produced Or Provided By A Source, If The Prohibition Is Set Out In An Applicable Federal Acquisition Supply Chain Security Act (fascsa) Order, As Described In Paragraph (b)(1) Of Far 52.204 30, Federal Acquisition Supply Chain Security Act Orders Prohibition. (c) Procedures. (1) The Offeror Shall Search For The Phrase Fascsa Order In The System For Award Management (sam)(https://www.sam.gov) For Any Covered Article, Or Any Products Or Services Produced Or Provided By A Source, If There Is An Applicable Fascsa Order Described In Paragraph (b)(1) Of Far 52.204 30, Federal Acquisition Supply Chain Security Act Orders Prohibition. (2) The Offeror Shall Review The Solicitation For Any Fascsa Orders That Are Not In Sam, But Are Effective And Do Apply To The Solicitation And Resultant Contract (see Far 4.2303(c)(2)). (3) Fascsa Orders Issued After The Date Of Solicitation Do Not Apply Unless Added By An Amendment To The Solicitation. (d) Representation. By Submission Of This Offer, The Offeror Represents That It Has Conducted A Reasonable Inquiry, And That The Offeror Does Not Propose To Provide Or Use In Response To This Solicitation Any Covered Article, Or Any Products Or Services Produced Or Provided By A Source, If The Covered Article Or The Source Is Prohibited By An Applicable Fascsa Order In Effect On The Date The Solicitation Was Issued, Except As Waived By The Solicitation, Or As Disclosed In Paragraph (e). (e) Disclosures. The Purpose For This Disclosure Is So The Government May Decide Whether To Issue A Waiver. For Any Covered Article, Or Any Products Or Services Produced Or Provided By A Source, If The Covered Article Or The Source Is Subject To An Applicable Fascsa Order, And The Offeror Is Unable To Represent Compliance, Then The Offeror Shall Provide The Following Information As Part Of The Offer: (1) Name Of The Product Or Service Provided To The Government; (2) Name Of The Covered Article Or Source Subject To A Fascsa Order; (3) If Applicable, Name Of The Vendor, Including The Commercial And Government Entity Code And Unique Entity Identifier (if Known), That Supplied The Covered Article Or The Product Or Service To The Offeror; (4) Brand; (5) Model Number (original Equipment Manufacturer Number, Manufacturer Part Number, Or Wholesaler Number); (6) Item Description; (7) Reason Why The Applicable Covered Article Or The Product Or Service Is Being Provided Or Used; (f) Executive Agency Review Of Disclosures. The Contracting Officer Will Review Disclosures Provided In Paragraph (e) To Determine If Any Waiver May Be Sought. A Contracting Officer May Choose Not To Pursue A Waiver For Covered Articles Or Sources Otherwise Subject To A Fascsa Order And May Instead Make An Award To An Offeror That Does Not Require A Waiver. (end Of Provision) 52.216-1 Type Of Contract (apr 1984) The Government Contemplates Award Of A Firm-fixed-price, Indefinite Quantity Contract Resulting From This Solicitation. (end Of Provision) (end Of Addendum To 52.212-1) 52.212-2 Evaluation Commercial Products And Commercial Services (nov 2021) (a) The Government Will Award A Contract Resulting From This Solicitation To The Responsible Offeror Whose Offer Conforming To The Solicitation Will Be Most Advantageous To The Government, Price And Other Factors Considered. The Following Factors Shall Be Used To Evaluate Offers: 1) Technical Capability 2) Past Performance 3) Price (b) Evaluation Approach. The Government Will Evaluate Quotations Using The Comparative Evaluation Process Outlined In Far 13.106-2 (b) (3), Where Quotations Will Be Compared To One Another To Determine Which Provides The Best Benefit To The Government. The Government Reserves The Right To Consider A Quotation Other Than The Lowest Price That Provides Additional Benefit(s). Quotations May Exceed Minimum Requirements Of The Solicitation. The Government Reserves The Right To Select A Quotation That Provides Benefit To The Government That Exceeds The Minimum Requirements Of The Solicitation But Is Not Required To Do So. Each Response Must Meet The Minimum Requirements Of The Solicitation. The Government Is Not Requesting Or Accepting Alternate Quotations. The Evaluation Will Consider The Following: 1) Technical Capability: The Quotation Will Be Evaluated To The Extent To Which It Can Meet And/or Exceed The Government S Requirements As Outlined In The Solicitation And Based On The Information Requested In The Instructions To Quoters Section Of The Solicitation. Please Provide An Explanation Of Your Firm S Ability To Meet And/or Exceed The Technical Aspects Of This Solicitation. 2) Past Performance: Offerors Shall Provide At Least One Relevant Past Performance Reference. The Past Performance Evaluation Will Assess The Relative Risks Associated With A Quoter S Likelihood Of Success In Fulfilling The Solicitation S Requirements As Indicated By The Quoter S Record Of Past Performance. The Past Performance Evaluation May Be Based On The Contracting Officer S Knowledge Of And Previous Experience With The Supply Or Service Being Acquired; Customer Surveys, And Past Performance Questionnaire Replies; Contractor Performance Assessment Reporting System (cpars) At Http://www.cpars.gov/; Or Any Other Reasonable Basis. 3) Price: The Government Will Evaluate The Price By Adding The Total Of All Line-item Prices. The Total Evaluated Price Will Be That Sum. (c) A Written Notice Of Award Or Acceptance Of An Offer, Mailed Or Otherwise Furnished To The Successful Offeror Within The Time For Acceptance Specified In The Offer, Shall Result In A Binding Contract Without Further Action By Either Party. Before The Offer's Specified Expiration Time, The Government May Accept An Offer (or Part Of An Offer), Whether Or Not There Are Negotiations After Its Receipt, Unless A Written Notice Of Withdrawal Is Received Before Award. (c) A Written Notice Of Award Or Acceptance Of An Offer, Mailed Or Otherwise Furnished To The Successful Offeror Within The Time For Acceptance Specified In The Offer, Shall Result In A Binding Contract Without Further Action By Either Party. Before The Offer's Specified Expiration Time, The Government May Accept An Offer (or Part Of An Offer), Whether Or Not There Are Negotiations After Its Receipt, Unless A Written Notice Of Withdrawal Is Received Before Award. (end Of Provision) representations And Certifications Electronically Via The System For Award Management (sam) Website Located At Https://www.sam.gov/portal In Accordance With Far 52.212-3, Offerors Representations And Certifications Commercial Products And Commercial Services. If Paragraph (j) Of The Provision Is Applicable, A Written Submission Is Required. the Following Contract Clauses Apply To This Acquisition: far 52.212-4, Contract Terms And Conditions Commercial Products And Commercial Services (nov 2023) addendum To Far 52.212-4 Contract Terms And Conditions Commercial Products And Commercial Services clauses That Are Incorporated By Reference (by Citation Number, Title, And Date), Have The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. the Following Clauses Are Incorporated Into 52.212-4 As An Addendum To This Contract: 52.252-2 Clauses Incorporated By Reference (feb 1998) This Contract Incorporates One Or More Clauses By Reference, With The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. Also, The Full Text Of A Clause May Be Accessed Electronically At This/these Address(es): Https://www.acquisition.gov/browse/index/far Https://www.va.gov/oal/library/vaar/ (end Of Clause) far Number title date 52.204-13 system For Award Management Maintenance oct 2018 52.204-18 commercial And Government Entity Code Maintenance aug 2020 52.223-2 reporting Of Biobased Products Under Service And Construction Contracts may 2024 52.237-3 continuity Of Services jan 1991 52.216-18 Ordering (aug 2020) (a) Any Supplies And Services To Be Furnished Under This Contract Shall Be Ordered By Issuance Of Delivery Orders Or Task Orders By The Individuals Or Activities Designated In The Schedule. Such Orders May Be Issued From 03/24/2025 Through 03/23/2030. (b) All Delivery Orders Or Task Orders Are Subject To The Terms And Conditions Of This Contract. In The Event Of Conflict Between A Delivery Order Or Task Order And This Contract, The Contract Shall Control. (c) A Delivery Order Or Task Order Is Considered "issued" When (1) If Sent By Mail (includes Transmittal By U.s. Mail Or Private Delivery Service), The Government Deposits The Order In The Mail; (2) If Sent By Fax, The Government Transmits The Order To The Contractor S Fax Number; Or (3) If Sent Electronically, The Government Either (i) Posts A Copy Of The Delivery Order Or Task Order To A Government Document Access System, And Notice Is Sent To The Contractor; Or (ii) Distributes The Delivery Order Or Task Order Via Email To The Contractor S Email Address. (d) Orders May Be Issued By Methods Other Than Those Enumerated In This Clause Only If Authorized In The Contract. (end Of Clause) 52.216-19 Order Limitations (oct 1995) (a) Minimum Order. When The Government Requires Supplies Or Services Covered By This Contract In An Amount Of Less Than $2,500.00, The Government Is Not Obligated To Purchase, Nor Is The Contractor Obligated To Furnish, Those Supplies Or Services Under The Contract. (b) Maximum Order. The Contractor Is Not Obligated To Honor (1) Any Order For A Single Item In Excess Of To Be Determined At Award; (2) Any Order For A Combination Of Items In Excess Of To Be Determined At Award; Or (3) A Series Of Orders From The Same Ordering Office Within 10 Days That Together Call For Quantities Exceeding The Limitation In Paragraph (b)(1) Or (2) Of This Section. (c) If This Is A Requirements Contract (i.e., Includes The Requirements Clause At Subsection 52.216-21 Of The Federal Acquisition Regulation (far)), The Government Is Not Required To Order A Part Of Any One Requirement From The Contractor If That Requirement Exceeds The Maximum-order Limitations In Paragraph (b) Of This Section. (d) Notwithstanding Paragraphs (b) And (c) Of This Section, The Contractor Shall Honor Any Order Exceeding The Maximum Order Limitations In Paragraph (b), Unless That Order (or Orders) Is Returned To The Ordering Office Within 5 Days After Issuance, With Written Notice Stating The Contractor's Intent Not To Ship The Item (or Items) Called For And The Reasons. Upon Receiving This Notice, The Government May Acquire The Supplies Or Services From Another Source. (end Of Clause) 52.216-21 Requirements (oct 1995) (a) This Is A Requirements Contract For The Supplies Or Services Specified, And Effective For The Period Stated, In The Schedule. The Quantities Of Supplies Or Services Specified In The Schedule Are Estimates Only And Are Not Purchased By This Contract. Except As This Contract May Otherwise Provide, If The Government's Requirements Do Not Result In Orders In The Quantities Described As "estimated" Or "maximum" In The Schedule, That Fact Shall Not Constitute The Basis For An Equitable Price Adjustment. (b) Delivery Or Performance Shall Be Made Only As Authorized By Orders Issued In Accordance With The Ordering Clause. Subject To Any Limitations In The Order Limitations Clause Or Elsewhere In This Contract, The Contractor Shall Furnish To The Government All Supplies Or Services Specified In The Schedule And Called For By Orders Issued In Accordance With The Ordering Clause. The Government May Issue Orders Requiring Delivery To Multiple Destinations Or Performance At Multiple Locations. (c) Except As This Contract Otherwise Provides, The Government Shall Order From The Contractor All The Supplies Or Services Specified In The Schedule That Are Required To Be Purchased By The Government Activity Or Activities Specified In The Schedule. (d) The Government Is Not Required To Purchase From The Contractor Requirements In Excess Of Any Limit On Total Orders Under This Contract. (e) If The Government Urgently Requires Delivery Of Any Quantity Of An Item Before The Earliest Date That Delivery May Be Specified Under This Contract, And If The Contractor Will Not Accept An Order Providing For The Accelerated Delivery, The Government May Acquire The Urgently Required Goods Or Services From Another Source. (f) Any Order Issued During The Effective Period Of This Contract And Not Completed Within That Period Shall Be Completed By The Contractor Within The Time Specified In The Order. The Contract Shall Govern The Contractor's And Government's Rights And Obligations With Respect To That Order To The Same Extent As If The Order Were Completed During The Contract's Effective Period; Provided, That The Contractor Shall Not Be Required To Make Any Deliveries Under This Contract After 03/23/2030. (end Of Clause) 52.216-22 Indefinite Quantity (oct 1995) (a) This Is An Indefinite-quantity Contract For The Supplies Or Services Specified, And Effective For The Period Stated, In The Schedule. The Quantities Of Supplies And Services Specified In The Schedule Are Estimates Only And Are Not Purchased By This Contract. (b) Delivery Or Performance Shall Be Made Only As Authorized By Orders Issued In Accordance With The Ordering Clause. The Contractor Shall Furnish To The Government, When And If Ordered, The Supplies Or Services Specified In The Schedule Up To And Including The Quantity Designated In The Schedule As The "maximum." The Government Shall Order At Least The Quantity Of Supplies Or Services Designated In The Schedule As The "minimum." (c) Except For Any Limitations On Quantities In The Order Limitations Clause Or In The Schedule, There Is No Limit On The Number Of Orders That May Be Issued. The Government May Issue Orders Requiring Delivery To Multiple Destinations Or Performance At Multiple Locations. (d) Any Order Issued During The Effective Period Of This Contract And Not Completed Within That Period Shall Be Completed By The Contractor Within The Time Specified In The Order. The Contract Shall Govern The Contractor's And Government's Rights And Obligations With Respect To That Order To The Same Extent As If The Order Were Completed During The Contract's Effective Period; Provided, That The Contractor Shall Not Be Required To Make Any Deliveries Under This Contract After 03/23/2030. (end Of Clause) vaar 852.203-70 Commercial Advertising (may 2018) The Contractor Shall Not Make Reference In Its Commercial Advertising To Department Of Veterans Affairs Contracts In A Manner That States Or Implies The Department Of Veterans Affairs Approves Or Endorses The Contractor S Products Or Services Or Considers The Contractor S Products Or Services Superior To Other Products Or Services. (end Of Clause) vaar 852.232-72 Electronic Submission Of Payment Requests (nov 2018) (a) Definitions. As Used In This Clause (1) Contract Financing Payment Has The Meaning Given In Far 32.001; (2) Designated Agency Office Means The Office Designated By The Purchase Order, Agreement, Or Contract To First Receive And Review Invoices. This Office Can Be Contractually Designated As The Receiving Entity. This Office May Be Different From The Office Issuing The Payment; (3) Electronic Form Means An Automated System Transmitting Information Electronically According To The Accepted Electronic Data Transmission Methods And Formats Identified In Paragraph (c) Of This Clause. Facsimile, Email, And Scanned Documents Are Not Acceptable Electronic Forms For Submission Of Payment Requests; (4) Invoice Payment Has The Meaning Given In Far 32.001; And (5) Payment Request Means Any Request For Contract Financing Payment Or Invoice Payment Submitted By The Contractor Under This Contract. (b) Electronic Payment Requests. Except As Provided In Paragraph (e) Of This Clause, The Contractor Shall Submit Payment Requests In Electronic Form. Purchases Paid With A Government-wide Commercial Purchase Card Are Considered To Be An Electronic Transaction For Purposes Of This Rule, And Therefore No Additional Electronic Invoice Submission Is Required. (c) Data Transmission. A Contractor Must Ensure That The Data Transmission Method And Format Are Through One Of The Following: (1) Va S Electronic Invoice Presentment And Payment System At The Current Website Address Provided In The Contract. (2) Any System That Conforms To The X12 Electronic Data Interchange (edi) Formats Established By The Accredited Standards Center (asc) And Chartered By The American National Standards Institute (ansi). (d) Invoice Requirements. Invoices Shall Comply With Far 32.905. (e) Exceptions. If, Based On One Of The Circumstances In This Paragraph (e), The Contracting Officer Directs That Payment Requests Be Made By Mail, The Contractor Shall Submit Payment Requests By Mail Through The United States Postal Service To The Designated Agency Office. Submission Of Payment Requests By Mail May Be Required For (1) Awards Made To Foreign Vendors For Work Performed Outside The United States; (2) Classified Contracts Or Purchases When Electronic Submission And Processing Of Payment Requests Could Compromise The Safeguarding Of Classified Or Privacy Information; (3) Contracts Awarded By Contracting Officers In The Conduct Of Emergency Operations, Such As Responses To National Emergencies; (4) Solicitations Or Contracts In Which The Designated Agency Office Is A Va Entity Other Than The Va Financial Services Center In Austin, Texas; Or (5) Solicitations Or Contracts In Which The Va Designated Agency Office Does Not Have Electronic Invoicing Capability As Described Above. (end Of Clause) vaar 852.242-71 Administrative Contracting Officer (oct 2020) The Contracting Officer Reserves The Right To Designate An Administrative Contracting Officer (aco) For The Purpose Of Performing Certain Tasks/duties In The Administration Of The Contract. Such Designation Will Be In Writing Through An Aco Letter Of Delegation And Will Identify The Responsibilities And Limitations Of The Aco. A Copy Of The Aco Letter Of Delegation Will Be Furnished To The Contractor. (end Of Clause) (end Of Addendum To 52.212-4) 52.212-5 Contract Terms And Conditions Required To Implement Statutes Or Executive Orders Commercial Products And Commercial Services (nov 2024) (a) The Contractor Shall Comply With The Following Federal Acquisition Regulation (far) Clauses, Which Are Incorporated In This Contract By Reference, To Implement Provisions Of Law Or Executive Orders Applicable To Acquisitions Of Commercial Products And Commercial Services: (1) 52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements (jan 2017) (section 743 Of Division E, Title Vii, Of The Consolidated And Further Continuing Appropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriations Acts (and As Extended In Continuing Resolutions)). (2) 52.204 23, Prohibition On Contracting For Hardware, Software, And Services Developed Or Provided By Kaspersky Lab Covered Entities (dec 2023) (section 1634 Of Pub. L. 115 91). (3) 52.204 25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment. (nov 2021) (section 889(a)(1)(a) Of Pub. L. 115 232). (4) 52.209-10, Prohibition On Contracting With Inverted Domestic Corporations (nov 2015). (5) 52.232 40, Providing Accelerated Payments To Small Business Subcontractors (mar 2023) (31 U.s.c. 3903 And 10 U.s.c. 3801). (6) 52.233-3, Protest After Award (aug 1996) (31 U.s.c. 3553). (7) 52.233-4, Applicable Law For Breach Of Contract Claim (oct 2004) (public Laws 108-77 And 108-78 (19 U.s.c. 3805 Note)). (b) The Contractor Shall Comply With The Far Clauses In This Paragraph (b) That The Contracting Officer Has Indicated As Being Incorporated In This Contract By Reference To Implement Provisions Of Law Or Executive Orders Applicable To Acquisitions Of Commercial Products And Commercial Services: [] (1) 52.203 6, Restrictions On Subcontractor Sales To The Government (jun 2020), With Alternate I (nov 2021) (41 U.s.c. 4704 And 10 U.s.c. 4655). [] (2) 52.203 13, Contractor Code Of Business Ethics And Conduct (nov 2021) (41 U.s.c. 3509). [] (3) 52.203 15, Whistleblower Protections Under The American Recovery And Reinvestment Act Of 2009 (jun 2010) (section 1553 Of Pub. L. 111-5). (applies To Contracts Funded By The American Recovery And Reinvestment Act Of 2009.) [x] (4) 52.203 17, Contractor Employee Whistleblower Rights (nov 2023) (41 U.s.c. 4712); This Clause Does Not Apply To Contracts Of Dod, Nasa, The Coast Guard, Or Applicable Elements Of The Intelligence Community See Far 3.900(a). [x] (5) 52.204 10, Reporting Executive Compensation And First-tier Subcontract Awards (jun 2020) (pub. L. 109 282) (31 U.s.c. 6101 Note). [] (6) [reserved] [] (7) 52.204 14, Service Contract Reporting Requirements (oct 2016) (pub. L. 111 117, Section 743 Of Div. C). [] (8) 52.204 15, Service Contract Reporting Requirements For Indefinite-delivery Contracts (oct 2016) (pub. L. 111 117, Section 743 Of Div. C). [x] (9) 52.204 27, Prohibition On A Bytedance Covered Application (jun 2023) (section 102 Of Division R Of Pub. L. 117 328). [] (10) 52.204 28, Federal Acquisition Supply Chain Security Act Orders Federal Supply Schedules, Governmentwide Acquisition Contracts, And Multi-agency Contracts. (dec 2023) (pub. L. 115 390, Title Ii). [x] (11)(i) 52.204 30, Federal Acquisition Supply Chain Security Act Orders Prohibition. (dec 2023) (pub. L. 115 390, Title Ii). [] (ii) Alternate I (dec 2023) Of 52.204 30. [x] (12) 52.209 6, Protecting The Government S Interest When Subcontracting With Contractors Debarred, Suspended, Or Proposed For Debarment. (nov 2021) (31 U.s.c. 6101 Note). [] (13) 52.209-9, Updates Of Publicly Available Information Regarding Responsibility Matters (oct 2018) (41 U.s.c. 2313). [] (14) [reserved] [] (15) 52.219 3, Notice Of Hubzone Set-aside Or Sole-source Award (oct 2022) (15 U.s.c. 657a). [x] (16) 52.219 4, Notice Of Price Evaluation Preference For Hubzone Small Business Concerns (oct 2022) (if The Offeror Elects To Waive The Preference, It Shall So Indicate In Its Offer) (15 U.s.c. 657a). [] (17) [reserved] [] (18)(i) 52.219-6, Notice Of Total Small Business Set-aside (nov 2020) (15 U.s.c. 644). [] (ii) Alternate I (mar 2020) Of 52.219-6. [] (19)(i) 52.219-7, Notice Of Partial Small Business Set-aside (nov 2020) (15 U.s.c. 644). [] (ii) Alternate I (mar 2020) Of 52.219-7. [] (20) 52.219-8, Utilization Of Small Business Concerns (feb 2024) (15 U.s.c. 637(d)(2) And (3)). [] (21)(i) 52.219 9, Small Business Subcontracting Plan (sep 2023) (15 U.s.c. 637(d)(4)). [] (ii) Alternate I (nov 2016) Of 52.219-9. [] (iii) Alternate Ii (nov 2016) Of 52.219-9. [] (iv) Alternate Iii (jun 2020) Of 52.219 9. [] (v) Alternate Iv (sep 2023) Of 52.219 9. [] (22)(i) 52.219-13, Notice Of Set-aside Of Orders (mar 2020) (15 U.s.c. 644(r)). [] (ii) Alternate I (mar 2020) Of 52.219-13. [] (23) 52.219 14, Limitations On Subcontracting (oct 2022) (15 U.s.c. 657s). [] (24) 52.219-16, Liquidated Damages Subcontracting Plan (sep 2021) (15 U.s.c. 637(d)(4)(f)(i)). [] (25) 52.219 27, Notice Of Set-aside For, Or Sole-source Award To, Service-disabled Veteran-owned Small Business (sdvosb) Concerns Eligible Under The Sdvosb Program (feb 2024) (15 U.s.c. 657f). [x] (26) (i) 52.219 28, Post-award Small Business Program Representation (feb 2024) (15 U.s.c. 632(a)(2)). [] (ii) Alternate I (mar 2020) Of 52.219 28. [] (27) 52.219 29, Notice Of Set-aside For, Or Sole-source Award To, Economically Disadvantaged Women-owned Small Business Concerns (oct 2022) (15 U.s.c. 637(m)). [] (28) 52.219 30, Notice Of Set-aside For, Or Sole-source Award To, Women-owned Small Business Concerns Eligible Under The Women-owned Small Business Program (oct 2022) (15 U.s.c. 637(m)). [] (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (mar 2020) (15 U.s.c. 644(r)). [] (30) 52.219 33, Nonmanufacturer Rule (sep 2021) (15 U.s.c. 657s). [x] (31) 52.222-3, Convict Labor (jun 2003) (e.o. 11755). [] (32) 52.222 19, Child Labor Cooperation With Authorities And Remedies (feb 2024) (e.o. 13126). [x] (33) 52.222-21, Prohibition Of Segregated Facilities (apr 2015). [x] (34)(i) 52.222 26, Equal Opportunity (sep 2016) (e.o. 11246). [] (ii) Alternate I (feb 1999) Of 52.222-26. [x] (35)(i) 52.222 35, Equal Opportunity For Veterans (jun 2020) (38 U.s.c. 4212). [] (ii) Alternate I (jul 2014) Of 52.222-35. [x] (36)(i) 52.222 36, Equal Opportunity For Workers With Disabilities (jun 2020) (29 U.s.c. 793). [] (ii) Alternate I (jul 2014) Of 52.222-36. [x] (37) 52.222 37, Employment Reports On Veterans (jun 2020) (38 U.s.c. 4212). [] (38) 52.222-40, Notification Of Employee Rights Under The National Labor Relations Act (dec 2010) (e.o. 13496). [x] (39)(i) 52.222-50, Combating Trafficking In Persons (nov 2021) (22 U.s.c. Chapter 78 And E.o. 13627). [] (ii) Alternate I (mar 2015) Of 52.222-50 (22 U.s.c. Chapter 78 And E.o. 13627). [x] (40) 52.222-54, Employment Eligibility Verification (may 2022). (e. O. 12989). (not Applicable To The Acquisition Of Commercially Available Off-the-shelf Items Or Certain Other Types Of Commercial Products Or Commercial Services As Prescribed In Far 22.1803.) [] (41)(i) 52.223-9, Estimate Of Percentage Of Recovered Material Content For Epa-designated Items (may 2008) (42 U.s.c.6962(c)(3)(a)(ii)). (not Applicable To The Acquisition Of Commercially Available Off-the-shelf Items.) [] (ii) Alternate I (may 2008) Of 52.223-9 (42 U.s.c. 6962(i)(2)(c)). (not Applicable To The Acquisition Of Commercially Available Off-the-shelf Items.) [] (42) 52.223-11, Ozone-depleting Substances And High Global Warming Potential Hydrofluorocarbons (may 2024) (42 U.s.c. 7671, Et Seq.). [] (43) 52.223-12, Maintenance, Service, Repair, Or Disposal Of Refrigeration Equipment And Air Conditioners (may 2024) (42 U.s.c. 7671, Et Seq.). [] (44) 52.223-20, Aerosols. (may 2024) (42 U.s.c. 7671, Et Seq.). [] (45) 52.223-21, Foams (may 2024). (42 U.s.c. 7671, Et Seq.). [x] (46) 52.223-23, Sustainable Products And Services (may 2024) (e.o. 14057, 7 U.s.c. 8102, 42 U.s.c. 6962, 42 U.s.c. 8259b, And 42 U.s.c. 7671i). [] (47)(i) 52.224-3, Privacy Training (jan 2017) (5 U.s.c. 552a). [] (ii) Alternate I (jan 2017) Of 52.224-3. [] (48)(i) 52.225-1, Buy American Supplies (oct 2022) (41 U.s.c. Chapter 83). [] (ii) Alternate I (oct 2022) Of 52.225-1. [x] (49)(i) 52.225-3, Buy American Free Trade Agreements Israeli Trade Act (nov 2023) (19 U.s.c. 3301 Note, 19 U.s.c. 2112 Note, 19 U.s.c. 3805 Note, 19 U.s.c. 4001 Note, 19 U.s.c. Chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, And 112-43. [] (ii) Alternate I [reserved]. [] (iii) Alternate Ii (dec 2022) Of 52.225-3. [] (iv) Alternate Iii (feb 2024) Of 52.225-3. [] (v) Alternate Iv (oct 2022) Of 52.225-3. [] (50) 52.225 5, Trade Agreements (nov 2023) (19 U.s.c. 2501, Et Seq., 19 U.s.c. 3301 Note [x] (51) 52.225-13, Restrictions On Certain Foreign Purchases (feb 2021) (e.o.'s, Proclamations, And Statutes Administered By The Office Of Foreign Assets Control Of The Department Of The Treasury). [] (52) 52.225 26, Contractors Performing Private Security Functions Outside The United States (oct 2016) (section 862, As Amended, Of The National Defense Authorization Act For Fiscal Year 2008; 10 U.s.c. Subtitle A, Part V, Subpart G Note). [] (53) 52.226-4, Notice Of Disaster Or Emergency Area Set-aside (nov 2007) (42 U.s.c. 5150). [] (54) 52.226-5, Restrictions On Subcontracting Outside Disaster Or Emergency Area (nov 2007) (42 U.s.c. 5150). [x] (55) 52.226-8, Encouraging Contractor Policies To Ban Text Messaging While Driving (may 2024) (e.o. 13513) [x] (56) 52.229 12, Tax On Certain Foreign Procurements (feb 2021). [] (57) 52.232-29, Terms For Financing Of Purchases Of Commercial Products And Commercial Services (nov 2021) (41 U.s.c. 4505, 10 U.s.c. 3805). [] (58) 52.232-30, Installment Payments For Commercial Products And Commercial Services (nov 2021) (41 U.s.c. 4505, 10 U.s.c. 3805). [x] (59) 52.232-33, Payment By Electronic Funds Transfer System For Award Management (oct 2018) (31 U.s.c. 3332). [] (60) 52.232-34, Payment By Electronic Funds Transfer Other Than System For Award Management (jul 2013) (31 U.s.c. 3332). [] (61) 52.232-36, Payment By Third Party (may 2014) (31 U.s.c. 3332). [] (62) 52.239-1, Privacy Or Security Safeguards (aug 1996) (5 U.s.c. 552a). [x] (63) 52.240 1, Prohibition On Unmanned Aircraft Systems Manufactured Or Assembled By American Security Drone Act Covered Foreign Entities (nov 2024) (sections 1821 1826, Pub. L. 118 31, 41 U.s.c. 3901 Note Prec.). [] (64) 52.242-5, Payments To Small Business Subcontractors (jan 2017)(15 U.s.c. 637(d)(13)). [] (65)(i) 52.247-64, Preference For Privately Owned U.s.-flag Commercial Vessels (nov 2021) (46 U.s.c. 55305 And 10 U.s.c. 2631). [] (ii) Alternate I (apr 2003) Of 52.247-64. [] (iii) Alternate Ii (nov 2021) Of 52.247-64. (c) The Contractor Shall Comply With The Far Clauses In This Paragraph (c), Applicable To Commercial Services, That The Contracting Officer Has Indicated As Being Incorporated In This Contract By Reference To Implement Provisions Of Law Or Executive Orders Applicable To Acquisitions Of Commercial Products And Commercial Services: [x] (1) 52.222-41, Service Contract Labor Standards (aug 2018) (41 U.s.c. Chapter 67). [x] (2) 52.222-42, Statement Of Equivalent Rates For Federal Hires (may 2014) (29 U.s.c. 206 And 41 U.s.c. Chapter 67). employee Class Monetary Wage-fringe Benefits [x] (3) 52.222-43, Fair Labor Standards Act And Service Contract Labor Standards Price Adjustment (multiple Year And Option Contracts) (aug 2018) (29 U.s.c. 206 And 41 U.s.c. Chapter 67). [] (4) 52.222-44, Fair Labor Standards Act And Service Contract Labor Standards Price Adjustment (may 2014) (29 U.s.c 206 And 41 U.s.c. Chapter 67). [] (5) 52.222-51, Exemption From Application Of The Service Contract Labor Standards To Contracts For Maintenance, Calibration, Or Repair Of Certain Equipment Requirements (may 2014) (41 U.s.c. Chapter 67). [] (6) 52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services Requirements (may 2014) (41 U.s.c. Chapter 67). [x] (7) 52.222-55, Minimum Wages For Contractor Workers Under Executive Order 14026 (jan 2022). [x] (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (jan 2022) (e.o. 13706). [] (9) 52.226 6, Promoting Excess Food Donation To Nonprofit Organizations (jun 2020) (42 U.s.c. 1792). (d) Comptroller General Examination Of Record. The Contractor Shall Comply With The Provisions Of This Paragraph (d) If This Contract Was Awarded Using Other Than Sealed Bid, Is In Excess Of The Simplified Acquisition Threshold, As Defined In Far 2.101, On The Date Of Award Of This Contract, And Does Not Contain The Clause At 52.215-2, Audit And Records Negotiation. (1) The Comptroller General Of The United States, Or An Authorized Representative Of The Comptroller General, Shall Have Access To And Right To Examine Any Of The Contractor's Directly Pertinent Records Involving Transactions Related To This Contract. (2) The Contractor Shall Make Available At Its Offices At All Reasonable Times The Records, Materials, And Other Evidence For Examination, Audit, Or Reproduction, Until 3 Years After Final Payment Under This Contract Or For Any Shorter Period Specified In Far Subpart 4.7, Contractor Records Retention, Of The Other Clauses Of This Contract. If This Contract Is Completely Or Partially Terminated, The Records Relating To The Work Terminated Shall Be Made Available For 3 Years After Any Resulting Final Termination Settlement. Records Relating To Appeals Under The Disputes Clause Or To Litigation Or The Settlement Of Claims Arising Under Or Relating To This Contract Shall Be Made Available Until Such Appeals, Litigation, Or Claims Are Finally Resolved. (3) As Used In This Clause, Records Include Books, Documents, Accounting Procedures And Practices, And Other Data, Regardless Of Type And Regardless Of Form. This Does Not Require The Contractor To Create Or Maintain Any Record That The Contractor Does Not Maintain In The Ordinary Course Of Business Or Pursuant To A Provision Of Law. (e)(1) Notwithstanding The Requirements Of The Clauses In Paragraphs (a), (b), (c), And (d) Of This Clause, The Contractor Is Not Required To Flow Down Any Far Clause, Other Than Those In This Paragraph (e)(1) In A Subcontract For Commercial Products Or Commercial Services. Unless Otherwise Indicated Below, The Extent Of The Flow Down Shall Be As Required By The Clause (i) 52.203 13, Contractor Code Of Business Ethics And Conduct (nov 2021) (41 U.s.c. 3509). (ii) 52.203 17, Contractor Employee Whistleblower Rights (nov 2023) (41 U.s.c. 4712). (iii) 52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements (jan 2017) (section 743 Of Division E, Title Vii, Of The Consolidated And Further Continuing Appropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriations Acts (and As Extended In Continuing Resolutions)). (iv) 52.204 23, Prohibition On Contracting For Hardware, Software, And Services Developed Or Provided By Kaspersky Lab Covered Entities (dec 2023) (section 1634 Of Pub. L. 115 91). (v) 52.204 25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment. (nov 2021) (section 889(a)(1)(a) Of Pub. L. 115 232). (vi) 52.204 27, Prohibition On A Bytedance Covered Application (jun 2023) (section 102 Of Division R Of Pub. L. 117 328). (vii) (a) 52.204 30, Federal Acquisition Supply Chain Security Act Orders Prohibition. (dec 2023) (pub. L. 115 390, Title Ii). (b) Alternate I (dec 2023) Of 52.204 30. (viii) 52.219 8, Utilization Of Small Business Concerns (feb 2024) (15 U.s.c. 637(d)(2) And (3)), In All Subcontracts That Offer Further Subcontracting Opportunities. If The Subcontract (except Subcontracts To Small Business Concerns) Exceeds The Applicable Threshold Specified In Far 19.702(a) On The Date Of Subcontract Award, The Subcontractor Must Include 52.219 8 In Lower Tier Subcontracts That Offer Subcontracting Opportunities. (ix) 52.222-21, Prohibition Of Segregated Facilities (apr 2015). (x) 52.222 26, Equal Opportunity (sep 2016) (e.o. 11246). (xi) 52.222 35, Equal Opportunity For Veterans (jun 2020) (38 U.s.c. 4212). (xii) 52.222 36, Equal Opportunity For Workers With Disabilities (jun 2020) (29 U.s.c. 793). (xiii) 52.222 37, Employment Reports On Veterans (jun 2020) (38 U.s.c. 4212). (xiv) 52.222-40, Notification Of Employee Rights Under The National Labor Relations Act (dec 2010) (e.o. 13496). Flow Down Required In Accordance With Paragraph (f) Of Far Clause 52.222-40. (xv) 52.222-41, Service Contract Labor Standards (aug 2018) (41 U.s.c. Chapter 67). (xvi)(a) 52.222-50, Combating Trafficking In Persons (nov 2021) (22 U.s.c. Chapter 78 And E.o. 13627). (b) Alternate I (mar 2015) Of 52.222-50 (22 U.s.c. Chapter 78 And E.o. 13627). (xvii) 52.222-51, Exemption From Application Of The Service Contract Labor Standards To Contracts For Maintenance, Calibration, Or Repair Of Certain Equipment Requirements (may 2014) (41 U.s.c. Chapter 67). (xviii) 52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services Requirements (may 2014) (41 U.s.c. Chapter 67). (xix) 52.222-54, Employment Eligibility Verification (may 2022) (e. O. 12989). (xx) 52.222-55, Minimum Wages For Contractor Workers Under Executive Order 14026 (jan 2022). (xxi) 52.222-62 Paid Sick Leave Under Executive Order 13706 (jan 2022) (e.o. 13706). (xxii)(a) 52.224-3, Privacy Training (jan 2017) (5 U.s.c. 552a). (b) Alternate I (jan 2017) Of 52.224-3. (xxiii) 52.225 26, Contractors Performing Private Security Functions Outside The United States (oct 2016) (section 862, As Amended, Of The National Defense Authorization Act For Fiscal Year 2008; 10 U.s.c. Subtitle A, Part V, Subpart G Note). (xxiv) 52.226 6, Promoting Excess Food Donation To Nonprofit Organizations (jun 2020) (42 U.s.c. 1792). Flow Down Required In Accordance With Paragraph (e) Of Far Clause 52.226-6. (xxv) 52.232 40, Providing Accelerated Payments To Small Business Subcontractors (mar 2023) (31 U.s.c. 3903 And 10 U.s.c. 3801). Flow Down Required In Accordance With Paragraph (c) Of 52.232 40. (xxvi) 52.240 1, Prohibition On Unmanned Aircraft Systems Manufactured Or Assembled By American Security Drone Act Covered Foreign Entities (nov 2024) (sections 1821 1826, Pub. L. 118 31, 41 U.s.c.3901 Note Prec.). (xxvii) 52.247-64, Preference For Privately Owned U.s.-flag Commercial Vessels (nov 2021) (46 U.s.c. 55305 And 10 U.s.c. 2631). Flow Down Required In Accordance With Paragraph (d) Of Far Clause 52.247-64. (2) While Not Required, The Contractor May Include In Its Subcontracts For Commercial Products And Commercial Services A Minimal Number Of Additional Clauses Necessary To Satisfy Its Contractual Obligations. (end Of Clause) section F: Additional Information award Will Be Based Upon A Comparative Evaluation Of Quotes In Accordance With The Simplified Acquisition Procedures Of Far 13. Comparative Evaluation Is The Side By Side Pairwise Comparison Of Quotes Based On Factors Resulting In A Contracting Officer Decision For The Quote Most Favorable To The Government. the Following Are The Decision Factors: - Price - Technical Capability - Past Performance the Award Will Be Made To The Response Most Advantageous To The Government. responses Should Contain Your Best Terms, Conditions. to Facilitate The Award Process, All Quotes Must Include A Statement Regarding The Terms And Conditions Herein As Follows: "the Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document Without Modification, Deletion, Or Addition." or "the Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document With The Exception, Deletion, Or Addition Of The Following:" Quoters Shall List Exception(s) And Rationale For The Exception(s), If Any. questions questions In Response To This Notice Shall Be Submitted Via Email Only To Stephanie Mcfadden At Stephanie.mcfadden@va.gov, No Later Than 1:00pm, Et, Monday, January 27, 2025. Questions May Or May Not Result In An Extension Of The Solicitation. Sources Sought 36c24425q0230 Must Be Included In The Subject Line Of The Email. due Date submission Of Your Response Shall Be Submitted Via Email Only To Stephanie Mcfadden At Stephanie.mcfadden@va.gov, No Later Than 1:00pm, Thursday, February 13, 2025. Sources Sought 36c24425q0230 Must Be Included In The Subject Line Of The Email. late Submissions Shall Be Treated In Accordance With The Solicitation Provision At Far 52.212-1(f). the Response Shall Demonstrate The Ability To Meet The Requirements In The Solicitation. Specifically, Through Past Performances Of Providing Uniform Rental, Repair And Laundering Services To The Va Or Other Government Agencies. quotes Shall Clearly And Completely Address The Technical Elements Listed In The Sow. Responses To These Elements Will Form The Basis Of Determining The Technical Acceptability Of The Quote. A Quote May Be Considered Not Technically Acceptable If Inadequate Or Insufficient Information Is Submitted, Which May Exclude The Quote From Further Consideration. government May Make Award Based On The Initial Quotes Received; Therefore, An Offeror Should Submit Its Best Pricing With Its Quote. Pricing Submitted In Offeror Quote Shall Be Listed As Five Separate Line Items: One For Each Ordering Period As Outlined In Sow. Offerors Are Hereby Advised That Any Offeror-imposed Terms And Conditions That Deviate From The Government S Material Terms And Conditions Established By The Solicitation May Render The Quote Unacceptable And, Therefore, Ineligible For Award. the Government Intends To Issue A Single Award Resulting From This Solicitation. attachments

Description: Item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| higher-level Contract Quality Requirement (navicp Review Feb 1991)(feb 1999)|1|see Specification Sections C And E.| inspection Of Supplies--fixed-price (aug 1996)|2||| time Of Delivery (june 1997)|20|0001|four|750|||||||||||||||||| stop-work Order (aug 1989)|1|| general Information-fob-destination|1|b| wide Area Workflow Payment Instructions (jan 2023)|16|stand-alone Receiving Report - Certifications Combo - Receiving Report & Invoice - Material |na|tbd|n00104|tbd|n39040 - Certifications, S4306a - Material |n50286|tbd|133.2|na|na|n39040 - Certifications|na|na|s ee Dd 1423|port_ptnh_wawf_notification@navy.mil| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| value Engineering (jun 2020)|3|||| equal Opportunity (sep 2016)|2||| integrity Of Unit Prices (nov 2021)|1|| equal Opportunity For Veterans (jun 2020)|4||||| warranty Of Supplies Of A Noncomplex Nature (june 2003)|6|one Year From Date Of Delivery.|one Year From Date Of Delivery.||||| warranty Of Data--basic (mar 2014)|2||| small Business Subcontracting Plan (sep 2023)|4||||| equal Opportunity For Workers With Disabilities (jun 2020)|2||| transportation Of Supplies By Sea (jan 2023)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| progress Payments (nov 2021)|4||||| limitation Of Liability--high-value Items ($100k)(feb 1997)|1|| limitations On Pass-through Charges (jun 2020)|1|| notice Of Total Small Business Set-aside (oct 2020)(deviation 2020-o0008)|1|| list Of Award Attachments|5|||||| alternate A, Annual Representations And Certifications (nov 2023)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| royalty Information (apr 1984)|1|| annual Representations And Certifications (may 2024)|13|332919|750 Employees|||||||||||| cost Accounting Standards Notices And Certification (deviation 2018-o0015)(may 2018))|1|| instructions To Offerors -- Competitive Acquisition (nov 2021)|2||| facsimile Proposals (oct 1997)|1|| type Of Contract (apr 1984)|1|firm Fixed Price| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| this Amendment Is Issued Due To Quantity Change Of Requirement. Closing Date Extended To 27 Jan 2025. this Amendment Is Issued To Extend Closing Date To 10 Sep 2024. 1. Data Item A001 (inspection And Test Plan) May Be Waived If Already On File At Navsup Wss Mech. 2.drawings Associated With This Solicitation Will Be Made Available On The New Beta.sam Website, But Will Be Restricted Access Which Needs To Be Approved. Once Access Has Been Requested, Interested Vendors Should Email The Poc Listed On The Solicitation To Inform them Of The Request. 3. Navsup Wss Mech Will Be Considering Past Performance In The Evaluation Of Offers. See Clause 252.213-7000. 4. This Is A Rated Order Certified For National Defense Use,and The Contractor Will Follow All The Requirements Ofthe Defense Priorities And Allocations Systemregulation (15 Cfr 700). 1. Scope 1.1 The Material Covered In This Contract/purchase Order Will Be Used In A Crucial Shipboard System. The Use Of Incorrect Or Defective Material Would Create A High Probability Of Failure Resulting In Serious Personnel Injury, Loss Of Life, Loss Of Vital shipboard Systems, Or Loss Of The Ship Itself. Therefore, The Material Has Been Designated As Special Emphasis Material (level I, Scope Of Certification, Or Quality Assured) And Special Control Procedures Are Invoked To Ensure Receipt Of Correct Material. 2. Applicable Documents 2.1 Order Of Precedence - In The Event Of A Conflict Between The Text Of This Contract/purchase Order And The References And/or Drawings Cited Herein, The Text Of This Contract/purchase Order Must Take Precedence. Nothing In This Contract/purchase Order, however, Must Supersede Applicable Laws And Regulations Unless A Specific Exemption Has Been Obtained. 2.2 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.2.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 2.2.2 Documents, Drawings, And Publications Supplied Are Listed Under "drawing Number". These Items Should Be Retained Until An Award Is Made. 2.2.3 Specification Revisions - The Specification Revisions Listed Under "documents References" Below Are The Preferred Revision. Older And/or Newer R Evisions Are Acceptable When Listed Within Contract Support Library Reference Number Csd155 In Ecds (electric contractor Data Submission) At: Ht Tps://register.nslc.navy.mil/. This Is To Allow Contractors To Use Certain Acceptable Older Specification Revisions To Purge Their Existing Stock Of Material Certified To Those Older Revisions Or To Use Newer Specification revisions When Material Is Certified To Newly Released Revisions,without Requiring The Submittal Of Waiver/deviation Requests For Each Specification Revision On Every Contract. Revisions Of Specifications Reflecting Editorial And/or Re-approval (e.g. E2009, r2014, Etc.) Are Considered Inconsequential, But Are Acceptable When Their Revisions Are Listedwithin Csd155 Or Elsewhere Within This Contract. drawing Data=h684-1505a01 |53711| A|er |d|0001 | A|49998|0059711 drawing Data=h684-1505a01 |53711| A|er |d|0002 | A|49998|0060531 drawing Data=h684-1505a01 |53711| A|er |d|0003 | A|49998|0166290 drawing Data=h684-1505a05 |53711| A|er |d|0001 | A|49998|0039892 drawing Data=h684-1505a05 |53711| A|er |d|0001.1 | A|49998|0011824 drawing Data=h684-1505a05 |53711| A|er |d|0002 | A|49998|0068709 drawing Data=h684-1505a05 |53711| A|er |d|0003 | A|49998|0049591 drawing Data=h684-1505a05 |53711| A|er |d|0004 | A|49998|0064381 drawing Data=h684-1505a05 |53711| A|er |d|0005 | A|49998|0066716 drawing Data=h684-1505a05 |53711| A|er |d|0006 | A|49998|0019662 drawing Data=h684-1505a05 |53711| A|er |d|0007 | A|49998|0277934 drawing Data=h684-1505a05 |53711| A|er |d|0008 | A|49998|0228605 drawing Data=h684-1505a05 |53711| A|er |d|0009 | A|49998|0202813 drawing Data=h684-1505a08 |53711| A|er |d|0001 | A|49998|0063220 drawing Data=h684-1505a08 |53711| A|er |d|0001.1 | A|49998|0023665 drawing Data=h684-1505a08 |53711| A|er |d|0002 | A|49998|0111529 drawing Data=h684-1505a08 |53711| A|er |d|0003 | A|49998|0076624 drawing Data=h684-1505a08 |53711| A|er |d|0004 | A|49998|0043485 drawing Data=h684-1505a08 |53711| A|er |d|0005 | A|49998|0052444 drawing Data=h684-1505a08 |53711| A|er |d|0006 | A|49998|0060448 drawing Data=h684-1505a08 |53711| A|er |d|0007 | A|49998|0228873 drawing Data=h684-1505a10 |53711| A|er |d|0001 | A|49998|0051242 drawing Data=h684-1505a10 |53711| A|er |d|0001.1 | A|49998|0019823 drawing Data=h684-1505a10 |53711| A|er |d|0002 | A|49998|0064955 drawing Data=h684-1505a10 |53711| A|er |d|0003 | A|49998|0016187 drawing Data=h684-1505a10 |53711| A|er |d|0004 | A|49998|0039176 drawing Data=h684-1505a10 |53711| A|er |d|0005 | A|49998|0092840 drawing Data=h684-1505a11 |53711| A|er |d|0001 | A|49998|0044912 drawing Data=h684-1505a11 |53711| A|er |d|0001.1 | A|49998|0030478 drawing Data=h684-1505a11 |53711| A|er |d|0002 | A|49998|0072815 drawing Data=h684-1505a11 |53711| A|er |d|0003 | A|49998|0192093 drawing Data=h684-1505a11 |53711| A|er |d|0004 | A|49998|0178728 drawing Data=h684-1505a17 |53711| B|er |d|0001 | B|49998|0037760 drawing Data=h684-1505a17 |53711| B|er |d|0001.1 | B|49998|0035207 drawing Data=h684-1505a17 |53711| B|er |d|0001.2 | B|49998|0022573 drawing Data=h684-1505a17 |53711| B|er |d|0002 | B|49998|0054795 drawing Data=h684-1505a17 |53711| B|er |d|0003 | B|49998|0069519 drawing Data=h684-1505a17 |53711| B|er |d|0004 | B|49998|0033609 drawing Data=h684-1505a18 |53711| B|er |d|0001 | B|49998|0036238 drawing Data=h684-1505a18 |53711| B|er |d|0001.1 | B|49998|0028959 drawing Data=h684-1505a18 |53711| B|er |d|0001.2 | B|49998|0017111 drawing Data=h684-1505a18 |53711| B|er |d|0002 | B|49998|0054081 drawing Data=h684-1505a18 |53711| B|er |d|0003 | B|49998|0030868 drawing Data=h684-1505a22 |53711| A|er |d|0001 | A|49998|0041854 drawing Data=h684-1505a22 |53711| A|er |d|0001.1 | A|49998|0031258 drawing Data=h684-1505a22 |53711| A|er |d|0002 | A|49998|0049185 drawing Data=h684-1505a22 |53711| A|er |d|0003 | A|49998|0041149 drawing Data=h684-1505a22 |53711| A|er |d|0004 | A|49998|0200472 drawing Data=h684-1505a26 |53711| A|er |d|0001 | A|49998|0042850 drawing Data=h684-1505a26 |53711| A|er |d|0001.1 | A|49998|0021670 drawing Data=h684-1505a26 |53711| A|er |d|0002 | A|49998|0053195 drawing Data=h684-1505a26 |53711| A|er |d|0003 | A|49998|0201664 drawing Data=h684-1505a41 |53711| B|er |d|0001 | A|49998|0679677 drawing Data=h684-1505a45 |53711| A|er |d|0001 | A|49998|0259819 drawing Data=h684-1505a47 |53711| A|er |d|0001 | A|49998|0209879 drawing Data=h684-1505a53 |53711| B|er |d|0001 | B|49998|9999999 drawing Data=h684-1505a54 |53711| A|er |d|0001 | A|49998|1149113 drawing Data=h684-1505a63 |53711| A|er |d|0001 | A|49998|0231978 drawing Data=2621-625-03 |96169|al| |d|0001 |al|00026|0000000 drawing Data=2640-809x10 |96169| C| |d|0001 | C|00026|0000000 drawing Data=7285297 |53711| E| |d|0001 | E|49998|0862180 drawing Data=7285297 |53711| E| |d|0002 | E|49998|0392982 drawing Data=7285297 |53711| E| |d|0003 | E|49998|0280881 drawing Data=7285297 |53711| E| |d|0004 | E|49998|0204692 drawing Data=7286781 |53711| A| |d|0000.cov | A|49998|0039333 drawing Data=7286781 |53711| A| |d|0001 | A|49998|0079794 drawing Data=7286781 |53711| A| |d|0002 | A|49998|0037296 drawing Data=7286781 |53711| A| |d|0003 | A|49998|0009867 drawing Data=7286781 |53711| A| |d|0004 | A|49998|0010513 drawing Data=7286781 |53711| A| |d|0005 | A|49998|0026590 drawing Data=7286781 |53711| A| |d|0006.1 | A|49998|0060938 drawing Data=7286781 |53711| A| |d|0006.2 | A|49998|0058985 drawing Data=7286781 |53711| A| |d|0006.3 | A|49998|0056660 drawing Data=7286781 |53711| A| |d|0006.4 | A|49998|0057452 drawing Data=7286781 |53711| A| |d|0006.5 | A|49998|0062979 drawing Data=7286781 |53711| A| |d|0006.6 | A|49998|0022145 drawing Data=7286781 |53711| A| |d|0006.7 | A|49998|0036865 drawing Data=7286781 |53711| A| |d|0007.1 | A|49998|0024658 drawing Data=7286781 |53711| A| |d|0007.10 | A|49998|0039600 drawing Data=7286781 |53711| A| |d|0007.11 | A|49998|0038232 drawing Data=7286781 |53711| A| |d|0007.12 | A|49998|0026294 drawing Data=7286781 |53711| A| |d|0007.2 | A|49998|0034537 drawing Data=7286781 |53711| A| |d|0007.3 | A|49998|0034247 drawing Data=7286781 |53711| A| |d|0007.4 | A|49998|0034359 drawing Data=7286781 |53711| A| |d|0007.5 | A|49998|0035392 drawing Data=7286781 |53711| A| |d|0007.6 | A|49998|0034156 drawing Data=7286781 |53711| A| |d|0007.7 | A|49998|0033150 drawing Data=7286781 |53711| A| |d|0007.8 | A|49998|0039657 drawing Data=7286781 |53711| A| |d|0007.9 | A|49998|0040668 drawing Data=7286781 |53711| A| |d|0008.1 | A|49998|0028730 drawing Data=7286781 |53711| A| |d|0008.2 | A|49998|0043722 drawing Data=7286781 |53711| A| |d|0008.3 | A|49998|0012156 drawing Data=7286781 |53711| A| |d|0008.4 | A|49998|0008759 drawing Data=7286781 |53711| A| |d|0009 | A|49998|0175577 drawing Data=7286781 |53711| A| |d|0010 | A|49998|0134538 drawing Data=7286781 |53711| A| |d|0011 | A|49998|0172553 drawing Data=7286781 |53711| A| |d|0011.1 | A|49998|0087153 drawing Data=7286781 |53711| A| |d|0012 | A|49998|0126678 drawing Data=7286781 |53711| A| |d|0013 | A|49998|0100923 drawing Data=7286781 |53711| A| |d|0014 | A|49998|0137217 drawing Data=7286781 |53711| A| |d|0015 | A|49998|0088404 drawing Data=7286781 |53711| A| |d|0016 | A|49998|0138405 drawing Data=7286781 |53711| A| |d|0017 | A|49998|0112913 drawing Data=7286781 |53711| A| |d|0018 | A|49998|0112286 drawing Data=7286781 |53711| A| |d|0019 | A|49998|0114952 drawing Data=8617511 |53711| N| |d|0001 | N|49998|3447332 document Ref Data=fed-std-h28 | | |b |190424|a| | | document Ref Data=fed-std-h28 |0020| |b |941221|a| |01| document Ref Data=ansi/asq Z1.4 | | | |080101|a| | | document Ref Data=astm-b138 | | | |110101|a| | | document Ref Data=astm-b150 | | | |190401|a| | | document Ref Data=qq-n-281 | | |d |851023|a| 2| | document Ref Data=qq-n-286 | | |g |001207|a| | | document Ref Data=astm-b367 | | | |220401|a| | | document Ref Data=astm-b369 | | | |200401|a| | | document Ref Data=mil-std-792 | | |f |060519|a| | | document Ref Data=mil-dtl-1222 | | |j |001208|a| | | document Ref Data=astm-e1417 | | | |160615|a| | | document Ref Data=astm-e1444 | | | |160601|a| | | document Ref Data=mil-std-2035 | | |a |950515|a| | | document Ref Data=astm-d4066 | | | |130701|a| | | document Ref Data=astm-d6456 | | | |100801|a| | | document Ref Data=sae Ams 6931 | | |d |171201|a| | | document Ref Data=iso_9001 | | | |081115|a| | | document Ref Data=iso10012 | | | |030415|a| | | document Ref Data=mil-dtl-15024 | | |g |180303|a| | | document Ref Data=iso/iec 17025 | | | |050515|a| | | document Ref Data=qpl 25027 | | |17 |000207|a| | | document Ref Data=mil-dtl-32258 | | | |210601|a|2 | | document Ref Data=mil-i-45208 | | |a |810724|a| 1| | document Ref Data=mil-std-45662 | | |a |880801|a| | | document Ref Data=a-a-59004 | | |b |181118|a| | | document Ref Data=ansi/ncsl Z540.3 | | | |130326|a| | | document Ref Data=0900-lp-001-7000 | | | |810101|c| |01| document Ref Data=aia/nas Nasm 25027 | | |1 |121221|a| | | document Ref Data=s9074-aq-gib-010/248 | | |1 |191112|a| | | document Ref Data=t9074-as-gib-010/271 | | |1 |140911|a| | | document Ref Data=s9074-ar-gib-010a/278 (chg A) | | | |130214|a| | | 3. Requirements 3.1 ;complete Towed Sonar Hull And Backup Ball Valve Assembly Must Be In Accordance With Naval Sea Systems Command Drawing 7286781 And All Drawings And Engineering Referrals Provided With This Contract/purchase Order, Except As Amplified Or Modified Herein.; 3.2 ;adiprene L100, Durometer 50-60 Shore A Is An Acceptable Alternate Material For The Static Seal (part 27) Of Navsea Drawing 7286781.; 3.3 Material For Parts Requiring Certification - Quantitative Chemical And Mechanical Analysis Is Required For The Parts Listed Below Unless Specifically Stated Otherwise: part - ;body, Part 1, And Dynamic Seal Housing, Part 3 Of Drawing 7286781; material - ;astm-b369, Alloy Uns C96400; part - ;shear Sleeve, Part 18 Of Drawing 7286781; material - ;astm-b138, Uns C67500, Temper H02; part - ;shear Seal Rod, Part 20 Of Drawing 7286781; material - ;qq-n-286, Form 2, Annealed And Age Hardened; part - ;valve Stem, Part 23, And Static Seal Shaft, Part 26 Of Drawing 7286781; material - ;astm-b150, Alloy C63200, Rod, Temper Tq50 Or Tq55; part - ;plug, Piece 17a Of Drawing 2621-625-03; material - ;qq-n-281 With Mechanical Properties In Accordance With General Note 16 On Drawing 2621-625-03; part - ;studs, Part 88 Of Drawing 7286781; material - ;mil-dtl-1222, Type Iv, Qq-n-286, Annealed And Age Hardened; part - ;self-locking Heavy Hex Nuts, Part 89 Of Drawing 7286781; material - Qq-n-281, Class A Or B, With Chemical Composition In Accordance With Mil-dtl-32258. note: All Material Must Be The Same Class. self-locking Element - For 250 Degree Nuts Use Astm-d6456, Type 1 Or Astm-d4066, Group 01, Class 1 Or 2, Grade 1, 2, 3, 4, 5,or 6. For 450 Degree Nuts Use Astm-d6456, Type 1. part - ;ball, Piece 17li Of Drawing 8617511; material - Sae-ams-6931 or centrifugally Cast 6al-4v, Astm-b367, Grade C-5, With Mechanical Properties As Listed In Supplementary Requirement S6. note: Mechanical Properties For Bars, Forgings And Forging Stock Over 10" Must Be As Specified In The Applicable Drawing. If The Mechanical Properties Are Not Provided In The Drawing, The Mechanical Properties Specified In Sae-ams-6931 Table 2 For Material 6" to 10", Must Be Applied. part - ;seats (q3), Piece 16 Of Drawing 7285297; material - Md71-gg Mearthane (graphite Filled Urethane). Material Must Be Manufactured By Mearthane Products Inc. Cranston, Ri. (properties Specified Below Only) item Property Astm Test Method Value (a) Hardness D2240 70 +/- 5 Shore D (b) Specific Gravity D792 1.18 +/- 0.02 (c) Tensile Strength D412 (diec) 5000 Psi Min (d) Compression-defl D575 700 Psi Min @ 2% Def. (e) Tensile Impact D1822 300 Ft-lb/sq In (note 1) (type L Specimen) (f) Water Absorption D570 1.5% Max (1 Week At R.t.) note 1: These Values Are Minimum Averages. Separate Specimen Values May Not Vary More Than 25% Under The Specified Minimum. 3.4 Testing Certification - Certifications Are Required For The Following Tests On The Items Listed Below. Additional Testing On Other Piece Parts (if Any) Per Applicable Drawings And Specifications Is Still Required, But Certifications Are Only Required As listed Below. test - Non-destructive Tests item - ;weld Repair (as Applicable); performance - Per Applicable Fabrication Specification acceptance - Per Applicable Fabrication Specification attribute - Annealing And Age Hardening item - ;shear Seal Rod, Part 20, And Stud, Part 88 Of Drawing 7286781; performance - Qq-n-286 test - ;dye Penetrant Inspection For Non-magnetic Grades; item - ;self-locking Heavy Hex Nuts, Part 89 Of Drawing 7286781; performance - T9074-as-gib-010/271 Or Astm-e1417/astm-e1444 (method C Solvent Removal Techniques Must Not Be Used On Thread) acceptance - ;nasm25027 With Sampling In Accordance With Mil-dtl-32258; test - ;visual Inspection (root Layer); item - ;weldments; performance - ;t9074-as-gib-010/271; acceptance - ;mil-std-2035; test - ;visual Inspection (final Layer); item - ;weldments; performance - ;t9074-as-gib-010/271; acceptance - ;mil-std-2035; test - Weldability Test Of Astm-b369 Material item - ;body, Part 1, And Dynamic Seal Housing, Part 3 Of Drawing 7286781; performance - Astm-b369 acceptance - Astm-b369 test - Pressure Tests item - Each Assembly performance - ;general Notes 7001, 7003, 7006, And 7008; acceptance - ;general Notes 7001, 7003, 7006, And 7008; test - Quality Conformance Tests item - Self-locking Nuts performance - ;mil-dtl-32258; acceptance - ;mil-dtl-32258; attribute - Certificate Of Compliance item - Self-locking Nuts performance - This Certificate Must State That Self-locking Nuts Were Manufactured By An Approved Source. Approved Sources Are Those Listed On Qpl-25027 For The Appropriate Fastener. This Qpl May Also Be Considered As Approved Sources For Heavy Hex self-locking Nuts. attribute - Certificate Of Completion item - Self-locking Nut Nonmetallic Insert performance - ;astm D6456, Type 1 Or Astm D4066, Group 01, Class 1 Or 2, Grade 1, 2, 3, 4, 5, Or 6; 3.5 Radiography Is Required On ;body, Part 1, And Dynamic Seal Housing, Part 3 Of Drawing 7286781; . 3.6 The Pressure Tolerance Must Be As Specified In The Assembly Drawing, Detail Drawing, Design Specification Or Elsewhere In This Contract. Where Pressure Tolerances Are Not Provided By Drawings, Specifications Or Specified Elsewhere In This Contract, The following Must Be Used: For Pressure Tests Below 100 Psig, The Pressure Tolerance Must Be +1 Psig / -0 Psig. For Pressure Tests At Or Above 100 Psig Up To And Including 2500 Psig, The Pressure Tolerance Must Be +2% / -0 Psig Rounded Off To The Nearest Multiple Of The Smallest Graduation On An Analog Test Pressure Gauge, Not To Exceed 50 Psig. For Pressure Tests Above 2500 Psig, The Pressure Tolerance Must Be +2% / -0 Psig, Rounded Off To The Nearest Multiple Of The Smallest Graduation On An Analog Test Pressure Gauge, Not To Exceed 200 Psig. the Pressure Test Time Tolerance Must Be As Specified In The Assembly Drawing, Detail Drawing, Design Specification Or Elsewhere In This Contract. Where Pressure Test Time Tolerances Are Not Provided By Drawings, Specifications Or Specified Elsewhere In This contract, The Following Must Be Used: For A Test Duration Up To And Including 1 Hour, The Tolerance Must Be +5 Minutes / - 0 Minutes. For A Test Duration Of More Than 1 Hour Up To And Including 24 Hours, The Tolerance Must Be +30 Minutes / - 0 Minutes. For A Test Duration Of More Than 24 Hours, The Tolerance Must Be +60 Minutes / - 0 Minutes. 3.7 Seat Stack Height Measurement - To Ensure That Each Seat Is Within Tolerance, Check Each Seat Singularly By Measuring The Seat Height Over The Ball. This Measurement Is Calculated By Adding One-half Ball Diameter To The Half Stack Height Dimension On The drawing. Limits Are Determined By The Ball Diameter Tolerance And The Half Stack Height Tolerance. Check Dimensions By Measuring From The Seat Back Face To Top Of Ball. Manufacturers Of Seats That Do Not Have A Ball Of The Required Size Available Will Be required To Manufacture A Dummy Ball Or Segment Of A Ball With Sufficient Spherical Surface To Check The Above Dimension. 3.8 A Visual Inspection Shall Be Performed On The Finished Seat With Acceptance Criteria On Critical Surfaces Per Csd167 In The Ecds (electronic Contractor Data Submission) System At: Https://register.nslc.navy.mil/. 3.9 Ball Spherical Surface Waviness - Unless Otherwise Specified On Drawing, All Sealing Area Surfaces Must Have A Spherical Surface Waviness Which Does Not Exceed 0.0005 Inches Of Height Per Inch Of Spherical Surface. Roughness And Waviness Ratings Must apply In A Direction Which Yields The Maximum Rating, Normally Perpendicular To The Lay. 3.10 ;surface Waviness Must Be Verified Prior To Teflon Coating.; 3.11 Chemours Company (formerly Dupont) Teflon Coating 850g-204 And 852g-201. Use Of Chemours Company (formerly Dupont) Teflon Coating 851n-204 And 852n-201 Is Acceptable Until Exhausted - Teflon Coating Of Ball(s) Must Be In Accordance With General Note ;8; of Drawing ;8617511; . 3.11.1 Naval Ordnance Systems Command Od 10362 First Revision Dated 15 Aug 1961 Is Provided By Contract Support Library Reference Number Csd018 In Ecds At Https://register.nslc.navy.mil/ 3.11.2 Csd099 Provides Guidance For Acceptance/rejection Of Teflon-coated Valve Balls After Valve Assembly Production Testing. 3.12 Contract Support Library - Additional Requirements For This Item Are Identified As Contract Support Library Reference Number ;csd099; In Ecds At Https://register.nslc.navy.mil/ 3.13 Slow Strain Rate Tensile Test Laboratories - The Slow Strain Rate Tensile Test Of Qq-n-286 Must Be Performed By One Of The Following Laboratories: huntington Alloys, A Special Metals Company attn: Bill Bolenr 3200 Riverside Drive huntington, Wv 257059 phone: (304) 526-5889 fax: (304) 526-5973 metallurgical Consultants, Inc. attn: W. M. Buehler 4820 Caroline po Box 88046 houston, Tx 77288-0046 phone: (713) 526-6351 fax: (713) 526-2964 naval Surface Warfare Center, Carderock Division attn: Eric Focht Code 614 9500 Macarthur Blvd west Bethesda, Md 20817-5700 phone: (301) 227-5032 fax: (301) 227-5576 teledyne Allvac attn: Dr. W. D. Cao 2020 Ashcraft Ave. monroe, Nc 28110 phone: (704) 289-4511 fax: (704) 289-4269 westmoreland Mechanical Testing And Research Inc. attn: Andrew Wisniewski p.o. Box 388 youngstown, Pa 15696-0388 mannesmann Rohrenwerke mannesmann Forschungsinstitut (mfi) attn: Dr. Weiss postfach 251160 47251 Duisburg germany phone: 011-49-0203-9993194 fax: 011-49-0203-9994415 thyssenkrupp Vdm Usa, Inc. attn: D. C. Agarwal 11210 Steeplecrest Drive, Suite 120 houston, Tx 77065-4939 phone: (281) 955-6683 3.14 Specification Change - For Qq-n-281, Class B Material: 1 - Footnote 9 To Table Ii Of Qq-n-281 Does Not Apply. 2 - When Starting Material Is Round Bar Greater Than 3" Dia, The Mechanical Properties Of Hex Bar Apply. 3.15 Thread Forming - The Following Provides The Official Interpretation Of Paragraph 4.5.2.7 Of Mil-dtl-1222. 3.15.1 In Order To Qualify For "alternate Mechanical Testing" Found In Mil-dtl-1222j Paragraph 4.5.2.7 And Utilize The Mechanical Properties For The Starting Bar Stock In Lieu Of Performing Yield Strength Or Proof Stress Testing On Finished Fasteners, All Of the Subsequent Provisions Found In Mil-dtl-1222j Paragraphs 4.5.2.7 A Through E Must Be Met. If Any Single Provision Is Not Met, All Required Mechanical Testing Must Be Performed On The Finished Full Sized Fasteners. These Provisions Are Explained As Follows: a. Proper Product Lot Control And Traceability Must Be In Place. b. No Heat Treatment (including Hot Heading And Hot Forming), Cold Forming, Drawing, Rolling And Thread Rolling May Be Performed On The Starting Bar, Fastener Blanks Or Finished Fasteners After The Completion Of The Mechanical Testing On The Starting Bar. c. And D. The Proper Size Starting Bar Must Be Selected To Ensure Mechanical Properties Of Finished Fasteners Are Represented By The Mechanical Properties Of The Starting Bar. e. The Mandatory Testing, Axial Tensile (studs) And Wedge Tensile (screws And Bolts) Must Be Performed On Full Sized Fasteners. Note That There Is A Typographical Error In Paragraph 4.5.2.7 And That The Axial Load Test Is A Mandatory Test That Must Be performed On Studs As Required In Paragraph 4.5.2.7.e. 3.15.2 Thread Rolling Is A Cold Working Process And Is Not Considered To Be A Machining Or Grinding Operation. Therefore, Fasteners Which Have Rolled Threads Do Not Satisfy The Provisions Of Mil-dtl-1222j Paragraph 4.5.2.7.b And Are Not Eligible For The "alternate Mechanical Testing" Provision. 3.15.3 Thread Rolling Alone Is Not A Sufficient Cold Working Process To Qualify A Fastener To Be In The Cold Worked (cw) Condition. This Condition Is Only Applicable To Some 300 Series Stainless Steel Studs, Screws And Nuts. These Cw Condition Fasteners must Be Manufactured From Cold Worked Bar Stock Or Be Cold Headed In Order To Qualify. The Threads May Subsequently Be Rolled, Machined Or Ground. Testing Of The Finished Fasteners And/or Reporting Of The Starting Bar Stock Material Properties Is Subject To the Same Provisions Found In Mil-dtl-1222j Paragraph 4.5.2.7 And Discussed Above. 3.16 K-monel Fasteners - Material Must Be Heat Treated Per Qq-n-286. 3.16.1 Fasteners That Have Been Hot Or Cold Headed Or Roll Threaded Must Be Solution Annealed Followed By Age Hardening Subsequent To All Heading And Thread Rolling Operations. The Mechanical Properties On Certifications Must Be Actual Properties Of The annealed And Age Hardened Material And Must Meet The Requirements Of Qq-n-286. 3.16.2 Qq-n-286 Fasteners That Have Been Headed And/or Roll Threaded Must Not Beage Hardened Unless The Material Has Been Solution Annealed Subsequent To The Heading And Threading Operations. Threads Formed After The Final Age Hardening Heat Treatment Must Be cut Or Ground Only. 3.17 K-monel Fasteners - K-monel Externally Threaded Fasteners Must Have Mechanical Properties Determined In Accordance With Mil-dtl-1222. Test Results Must Include Tensile, Yield, Elongation And Hardness As Required By Mil-dtl-1222. (the Hardness Tests Must be Performed On A Full Size Fastener.) 3.17.1 Studs Require An Axial Tensile Test In Accordance With Mil-dtl-1222. 3.17.2 Headed Fasteners Require A Wedge Tensile Test As Specified Elsewhere In This Contract/purchase Order. 3.18 Internal Threads - All Internal Threads Must Be Formed By Cutting. Cold Forming Of Internal Threads Is Not Acceptable. 3.19 Thread Inspection Requirements - All Threads On Threaded Parts Must Be Inspected Using Appropriate Inspection Methods, Inspection Systems, And Inspection Gages/instruments In Accordance With Fed-std-h28 Series. Substitution Of Thecommercial Equivalent inspection In Accordance With Asme B1 Series Is Acceptable. 3.19.1 System 21 Of Fed-std-h28/20 Must Be Used As A Minimum Inspection Requirement For Threads When The Design Drawing Or Design Specification Does Not Specify An Inspection Requirement. 3.19.2 For Navy And Shipyard Drawings, System 21 Of Fed-std-h28/20 May Be Substituted For System 22 Without Further Navy Approval When The Design Drawing Invokes System 22 And Does Not Cite Governing Specifications That Specifically Require System 22. System 22 Of Fed-std-h28/20 Must Be Used When The Drawing References Other Governing Specifications That Specifically Require System 22, Such As Certain Thread Types Of Mil-dtl-1222. 3.19.3 A Written Request For Concurrence Must Be Submitted When Utilizing Alternative Measuring Equipment Or Measuring Systems Not Applicable To The Specified Inspection System. 3.20 Thread Lubricant - Thread Lubricants Containing Molybdenum Disulfide Must Not Be Used On This Material. Bacteria In Water, Especially Seawater, Causes Molybdenum Disulfide To Break Down. The By-products Of The Breakdown Form Compounds Which Attack The fasteners. Anti-galling Compound A-a-59004 Must Be Used As A Replacement When Thread Lubricant Is Required For Assembly. 3.21 Welding Or Brazing - When Welding, Brazing, And Allied Processes Are Required, As Invoked By Section C Paragraph 3 Requirements, They Must Be In Accordance With S9074-ar-gib-010a/278, 0900-lp-001-7000 For Brazing Of Piping And Pressure Vessel applications, Or S9074-aq-gib-010/248 For Brazing Of Other Applications. For All Production And Repair Welding And Brazing, Personnel And Procedures Must Be Qualified Under S9074-aq-gib-010/248 Or 0900-lp-001-7000, As Applicable. Repair Welding Is Not permitted On ;qq-n-286 Material; . Procedures And Qualification Data Must Be Submitted For Review And Approval Prior To Performing Any Welding Or Brazing. 3.22 O-ring Grooves And Mating Sealing Surfaces Must Be Inspected Per The Contractually Invoked Drawings Or Specifications. When The Drawings Or Specifications Do Not Provide Specific Defect Criteria Or State That No Defects Are Allowed, The General acceptance Criteria (gac) Standard Must Be Used For Inspecting O-ring Grooves And Mating Sealing Surfaces Only. Repairs To Sealing Surfaces And O-ring Grooves With Unacceptable Defects May Be Accomplished Within The Limits Of The Size And Tolerances Provided in The Applicable Drawing. Repairs Thatwould Exceed These Limits Require Approval (including Final Dimensions). The Data That Is Red Lined (crossed Out) Is Excluded From The Gac For This Contract And Is Not To Be Used For Acceptance Or Rejection Criteria. the Gac Document Is Identified As Contract Support Library Reference Number Csd008 At Https://register.nslc.navy.mil/ 3.23 Component Identification Description (cid) - When Applicable Drawing(s) And/or Specification(s) Specify That A Nameplate Or Identification Plate Is Required, The Cid Number ( ;cid 887245356; ) Must Be Added. When No Plate Is Specified, An Identification plate In Accordance With Mil-dtl-15024, Type "c" On Brass Or Type "h" On Aluminum Must Be Securely Attached To Each Assembly Showing The Above Cid Number. No Assembly Must Be Shipped Without The Cid Number Attached. 3.24 Configuration Control - The Contractor Must Maintain The Total Equipment Baseline Configuration. For Items Of Proprietary Design, Contractor Drawings Showing The Latest Assembly Configuration Must Be Provided To The Government In Electronic (c4) Format. definitions Are Provided Elsewhere In The Contract/purchase Order. 3.24.1 Waivers/deviations - All Waivers And Deviations, Regardless Of Significance Or Classification Require Review And Approval By The Contracting Officer. Waivers And Deviations Must Be Designated As Critical, Major, Or Minor. The Contractor Must Provide a Copy Of This Request To The Qar. Requests Must Include The Information Listed Below. A. A Complete Description Of The Contract Requirement Affected And The Nature Of The Waiver/deviation (non-conformance), Including A Classification Of Critical, Major, Or Minor. B. Number Of Units (and Serial/lot Numbers) To Be Delivered In This Configuration. C. Any Impacts To Logistics Support Elements (such As Software, Manuals, Spares, Tools, And Similar) Being Utilized By Government Personnel Or Impacts To The Operational Use Of The Product. D. Information About Remedial Action Being Taken To Prevent Reoccurrence Of The Non-conformance. 3.24.2 All Requests For Waivers/deviations On Navsup-wss Contracts Must Be Submitted To The Navsup Wss Contracting Specialist Via Email. 3.24.3 Ecps - The Government Will Maintain Configuration Control And Change Authority For All Modifications Or Changes Affecting Form, Fit, Function, Or Interface Parameters Of The Equipment And Its Sub-assemblies. The Contractor Must Submit An Engineering change Proposal (ecp) For Any Class I Or Ii Changes That Impact The Equipment Covered By This Contract. Ecps Must Be Prepared In Contractor Format, And Must Include The Following Information: A. The Change Priority, Change Classification (class I Or Class Ii), And Change Justification. B. A Complete Description Of The Change To Be Made And The Need For That Change. C. A Complete Listing Of Other Configuration Items Impacted By The Proposed Change And A Description Of The Impact On Those Cis. D. Proposed Changes To Documents Controlled By The Government. E. Proposed Serial/lot Number Effectivities Of Units To Be Produced In, Or Retrofitted To, The Proposed Configuration. F. Recommendations About The Way A Retrofit Should Be Accomplished. G. Impacts To Any Logistics Support Elements (such As Software, Manuals, Spares, Tools, And Similar) Being Utilized By Government Personnel In Support Of The Product. H. Impacts To The Operational Use Of The Product. I. Complete Estimated Life-cycle Cost Impact Of The Proposed Change. J. Milestones Relating To The Processing And Implementation Of The Engineering Change. 3.25 Mercury Free - Mercury And Mercury Containing Compounds Must Not Be Intentionally Added Or Come In Direct Contact With Hardware Or Supplies Furnished Under This Contract. Mercury Contamination Of The Material Will Be Cause For Rejection. 3.26 Navsea 0948-lp-045-7010 - Any Applicable Requirements Of Navships 4410.17,navsea 0948-lp-045-7010, Or 0948-045-7010 Which The Contractor Must Meet Are Included In This Contract/purchase Order. The Above Documents Are For Governmentuse Only. Further application Of The Above Documents Is Prohibited.prohibited. 3.26.1 Marking Of Material With A Material Designator Per The Drawing Is Also Prohibited, With The Exception Of Fasteners. Fasteners Must Be Marked With A Material Symbol/designator As Specified Elsewhere In This Contract. 3.27 Certificate Of Compliance - (special Emphasis Material) The Contractor Must Prepare And Submit A Certificate Of Compliance Certifying That The Items/components Furnished Under This Contract Comply With The Requirements Of The Procurement Document, including Any/all Invoked Specifications And Drawings. ^ Quality Assurance Requirements ^ 3.28 Radiography (rt) - Radiography Must Be Performed In Accordance With T9074-as-gib-010/271. Rt Acceptable Criteria For Castings To Be Criticality Level I Per The Applicable Table Of S9074-ar-gib-010a/278. Rt Acceptance Criteria For Weldments To Be Per The applicable Table Of S9074-ar-gib-010a/278 (p-1 Piping) Or Mil-std-2035, Class 1, As Applicable. 3.28.1 See Cdrl Di-misc-80678 (rss) - The Contractor Or Activity Performing The Radiography Must Be Responsible For Preparing The Radiographic Shooting Sketches (rss) In Accordance With T9074-as-gib-010/271. Shooting Sketch Approval Is Not Required For radiography Of Weldments. The Radiographic Standard Shooting Sketches (rsss) Referenced On The Applicable Drawing May Be Used, However, Since T9074-as-gib-010/271 Permits A Variety Of Processes, The Rsss May Not Be Applicable As They Will Not Necessarily Depend only On The Coverage Requirements, But Also On The Equipment And Procedures Of The Particular Radiographic Facility. Approval Of These Shooting Sketches Or Radiographic Standard Shooting Sketches Is Required Per S9074-ar-gib-010a/278. If This Data Has Been previously Approved By A Navy Activity, The Original Approval Letter Must Be Submitted At The Same Time As Rt Film And Reader Sheet Submittal. 3.28.2 All Pieces Radiographed Must Be Permanently Marked With "rt" And A Unique Rt Serial Number. (the Unique Rt Serial Number Must Be Directly Traceable To The Rt Film.) 3.28.3 See Cdrl Di-misc-80678 (production Radiography) - Production Radiography Requires Final Acceptance By The Navy. The Items Listed Below Must Be Submitted For Final Acceptance, Cataloging, File, And Retention. They Must Be Submitted And Approved Prior To shipment Of The Applicable Hardware. However, When The Source Certification Clause Is Invoked, They Must Be Submitted A Minimum Of Forty-five (45) Working Days Prior To The Date Of Source Certification Inspection. (a) Film (b) Rss/rsss (c) Rs (reader Sheets) (d) Documentation Record Listing The Part Number, Heat/lot Traceability, And Theunique Rt Serial Number (which Is Traceable To The Rt Film And Reader Sheet) 3.29 See Cdrl Di-misc-80678 (test Certification) - A Statement Of Tests Performed, Listing The Pieces Tested Must Be Furnished Along With A Copy Of The Test Results. Certification Must Include The Contractor's Name, Address And Date, Quantity Inspected, identified To The Contract/purchase Order And Item Number, And The Contractor's Or Authorized Personnel's Signature. Test Certifications Must Reference The Standard/specification, Including The Revision, To Which The Testing Was Performed And The Acceptance criteria Used. Test Procedure Numbers May Also Be Referenced On Test Reports. Test Reports On Weldments Must Be Identified To Weld Joint And Layer. 3.30 See Cdrls Di-misc-80875 (welding Procedures) And Di-misc-80876 (weld Procedure Qualification Data) - When Production Or Repair Welding Is Required, The Applicable Welding Procedure(s) And Qualification Data Must Be Submitted For Review And Approval. In addition, The Consumed Weld Metal C Of C As Defined Below Must Be Submitted As Part Of The Certification Oqe Package Submitted By The Contractor. note: These Requirements Do Not Apply To Tack/spot Welds. 3.30.1 Approval Of The Contractor's Qualification Data Must Be Obtained Prior To Performing Any Welding (production Or Repair). 3.30.2 If The Contractors Qualification Data Has Previously Been Approved By The Navy For Other Contracts, A Copy Of The Original Approval Letter May Be Submitted Along With The Procedures And Qualification Data Report To Expedite The Approval Process. The approval Letter Must Reference The Applicable Welding Procedure And Qualification Data Report Identification/number. Prior Approval Does Not Guarantee Acceptance For This Or Any Future Contracts. As Far As Practical, All Procedures For The Contract Must Be submitted At The Same Time. Welding Procedures And Qualification Data Must Be Submitted In A Commercially Available Electronic Format Such As Adobe Acrobat Pdf. The Contractor Must State The Applicability Of Each Weld Procedure And Qualification Data Submitted, citing The Drawing Number And Pieces To Be Welded. (i.e. "wp-123 And Qd-123 Are Submitted For The Weld Joint Between Pieces 1 And 2 On Drawing Abc." Wp-456 And Qd-456 Are Submitted For The Hardfacing Of Piece 3 On Drawing Xyz.") 3.30.3 The Pco's Authorization For The Use Of Weld Procedure(s) And Qualification Data For The Specific Application As Submitted Does Not Mitigate The Vendors Responsibility To Comply With The Requirements Of S9074-aq-gib-010/248, S9074-ar-gib-010a/278, And the Contract. 3.30.4 Authority For The Repair Of Special Repairs In Castings, The Repair Of Wrought Material, Or The Repair Of Forged Material Must Be Obtained Via Request For Waiver From The Procurement Contracting Officer. This Request Must Describe The Defect; Including size, Depth, Location, And A Description Of The Proposed Repair. Repairs Deemed Minor Or Nominal In Accordance With S9074-ar-gib-010/278 Can Be Made At Contractor Discretion In Accordance With S9074-ar-gib-010/278 Requirements; However, Weld Procedure specification (wps) And Procedure Qualification Record (pqr) Submittals Are Still Required. This Request For Navsup-wss Contracts Must Be Submitted Via The Electronic Contractor Data Submission (ecds) Application. 3.30.5 Any New Procedure Qualification Performed Under This Contract Will Require The Vendor To Provide A Minimum 72 Hour Notification To Dcma With An Offer To Observe The Welding Of The Test Assemblies. The 72 Hour Time Limit May Be Modified Upon Mutual agreement Between The Vendor And Dcma. 3.30.6 When Drawings Require Hardfacing Surface Iron Or Nickel Content Not To Exceed 5%, The Contractor Must Verify Surface Iron Or Nickel Content By Performing Chemical Testing As Defined By The Applicable Drawing. The Chemical Test Results Must Be Submitted as Part Of The Qualification Data. 3.30.7 Additional Qualification Requirements For Production Hardfacing Thickness Less Than 1/8-inch: Macro-etch (or Legible Photomacrographs Clearly Showing The Fusion Area) Must Be Submitted For Review And Show Consistent, Minimized Dilution. All Essential elements And Any Elements Not Listed In S9074-aq-gib-010/248 That Influence Dilution Must Be In The Qualification Data And Weld Procedure, With Strict Limits Placed On Each Essential Element. 3.30.8 Preparation And Retention Of Weld Records Is Required, As Specified By Paragraph 4.1.3 Of S9074-ar-gib-010a/278. 3.30.9 When Production Or Repair Welding Is Required On Titanium Materials, The Applicable Fabrication Plan, Facilities Procedure, Training Plan, And Active Welder Qualification Must Also Be Submitted For Review And Approval. 3.30.10 If The Contractor's Fabrication Plan, Facilities Procedure, Training Plan, Or Active Welder Qualification Has Previously Been Approved By The Navy For Other Contracts, A Copy Of The Original Approval Letter May Be Submitted Along With The Applicable documentation To Expedite The Approval Process. The Approval Letter Must Reference The Applicable Documentation. Prior Approval Does Not Guarantee Acceptance For This Or Any Future Contracts. The Contractor's Fabrication Plan, Facilities Procedure, Training plan, And Active Welder Qualification Must Be Submitted At The Same Time As The Applicable Welding Procedure(s) And Weld Procedure Qualification Data. All Documentation Must Be Submitted In A Commercially Available Electronic Format, Such As Adobe Acrobat Pdf. 3.30.11 See Cdrl Di-misc-80678 (consumed Weld Metal) - A Certificate Of Compliance Is Required For All Weld Filler Metals Used For Production Or Repair Welding, And Must Include The Following: a) Filler Metal Lot Number(s) b) Specification And Type c) A Positive Statement That The Vendor Has Obtained Oqe And Verified That Each Lot Of Weld Filler Material Conforms To Specification Requirements. d) A Positive Statement Verifying That The Weld Filler Metals Were The Correct Material Type Or Grade Prior To Consumption. 3.30.12 When Production Welds Or Repair Welds Are Performed By A Subcontractor, The Requirement For Submission Of All Certification Documentation Required Herein Must Be Passed Down To The Subcontractor. 3.31 Additional Marking For Fasteners - Fasteners Must Be Marked In Accordance With ;mil-dtl-1222, Except The Self-locking Heavy Hex Nuts Must Be Marked In Accordance With Mil-dtl-32258; . The Method Of Marking Must Be Types I, Ii, Iii, V, Viii Or Ix Of mil-std-792 Except For Grades 410, 416 And 431 In The H Condition And Grades 8, 630, A574, And 4340 Which Must Be Marked By Method Ii When Marking Is Applied After The Final Heat Treatment. Markings On Fasteners That Are To Be Coated Must Be Marked Prior To coating And Have A Minimum Depth Of 4 Mils. Traceability Marking Must Be Legible After The Application Of Protective Compounds. 3.31.1 Marking Is Required For All Fasteners Regardless Of Size And Must Include The Material Symbol, The Manufacturer's Identification Symbol, And The Traceability Marking. Marking Must Be Applied On The Head Of Headed Fastener (top Preferred, Side location If Necessary). Self-locking Screws Must Also Be Marked With Six Dots. Where No Contract Invoked Specification Requirement Exists For This Marking, Self-locking Fasteners Must Be Marked With Six Dots Approximately .032" Diameter, Raised Or Depressed by Approximately .010" Located On The Top Perimeter Of The Head Of The Fastener In An Arc Or Circular Pattern. The Six Dots Must Be Distinguishable From All Other Required Markings. 3.32 Quality System Requirements - The Contractor Furnishing Items Under This Contract/purchase Order Must Provide And Maintain A Quality System In Accordance With Iso-9001 As Amplified Or Modified Herein, With The Calibration System Requirements Of Iso-10012 or Ansi-z540.3 With Iso-17025. A Quality System In Accordance With Mil-i-45208, With The Calibration System Requirements Of Mil-std-45662, Is Acceptable As An Alternate. 3.32.1 The Contractor's Quality System And Products Supplied Under The System Are Subject To Evaluation, Verification Inspection, And Acceptance/non-acceptance By The Government Representative To Determine The System's Effectiveness In Meeting The Quality requirements Established In The Contract/purchase Order. 3.32.2 The Contractor's Quality System Must Be Documented And Must Be Available For Review By The Contracting Officer Or His Representative Prior To Initiation Of Production And Throughout The Life Of The Contract. The Prime Contractor Must, Upon notification, Make His Facilities Available For Audit By The Contracting Officer Or His Authorized Representative. 3.32.3 See Cdrl Di-qcic-81110 (inspection System Procedures) - All Suppliers Of Level I/subsafe (li/ss) Material Are Required To Submit A Copy Of Their Current Documented Quality System Procedures To The Procurement Contracting Officer (pco) Prior To Award Of any Contract/purchase Order. Suppliers That Have A Copy Of Their Current Quality System Procedures On File At The Procuring Activity May Request The Pco Waive This Requirement. 3.32.4 This Contract Provides For The Performance Of Government Quality Assurance At Source. The Place Or Places Of Performance May Not Be Changed Without The Authorization Of The Procurement Contracting Officer. Upon Receipt Of This Order, Promptly notify The Government Representative Who Normally Services Your Plant So That Appropriate Planning For Government Inspection Can Be Accomplished. If You Do Not Have An Assigned Government Representative, Notify The Nearest Defense Contract Management Agency (dcma) Office. In The Event That A Local Government Representative Or Dcma Office Cannot Be Located, Our Purchasing Agent Should Be Notified Immediately. 3.32.5 Any Changes Made By The Contractor To A Qualified Quality System Will Require Re-submittal To The Pco And Concurrence By The Government Quality Assurance Representative Prior To Adoption. 3.33 Contractor Inspection Requirements - The Contractor Must Maintain Adequate Records Of All Inspections And Tests. The Records Must Indicate The Nature And Number Of Observations Made, The Number And Type Of Deficiencies Found, The Quantities Approved And rejected And The Nature Of Corrective Action Taken As Appropriate. Inspection Records Must Be Traceable To The Material Inspected. 3.33.1 The Supplier's Gages, Measuring And Test Equipment Must Be Made Available For Use By The Government Representative When Required To Determine Conformance With Contract Requirements. When Conditions Warrant, The Supplier's Personnel Must Be Made available For Operations Of Such Devices and For Verification Of Their Accuracy And Condition. 3.33.2 All Documents And Reference Data Applicable To This Contract Must Be Available For Review By The Government Representative. Copies Of Documents Required For Government Inspection Purposes Must Be Furnished In Accordance With The Instructions Provided by The Government Representative. 3.34 Subcontractor Inspection Requirements - The Government Has The Right To Inspect At Source, Any Supplies Or Services That Were Not Manufactured Or Performed Within The Contractor's Facility. Such Inspection Can Only Be Requested By Or Under Authorization of The Government Representative. Any Purchasing Documents To A Subcontractor Must Cite The Applicable Portions Of The Contractually Invoked Quality System (e.g. Calibration Requirements), Plus Any Product Requirements That Apply To The Supplies Being purchased. When The Government Elects To Perform Source Inspection At The Subcontractor's Facility, Applicable Purchase Documents Must Be Annotated With The Following Statement: "a Government Inspection Is Required Prior To Shipment From Your Plant. Upon receipt Of This Order, Promptly Notify The Government Representative Who Normally Services Your Plant So That Appropriate Planning For Government Inspection Can Be Accomplished. If You Do Not Have An Assigned Government Representative, Notify The Nearest defense Contract Management Agency (dcma) Office. In The Event That A Local Government Representative Or Dcma Office Cannot Be Located, Our Purchasing Agent Should Be Notified Immediately." 3.35 The Prime Contractor's Program Must Include Procedures To Assess The Capability Of The Prospective Suppliers To Produce The Products Or Supply The Services In Accordance With The Contract, Prior To The Issuance Of Any Purchase Document. 3.35.1 Each Sub-tier Supplier Of Material Or Services For Items In Section 3 Of This Contract Must Be Subjected To A Periodic Review Or Audit By The Prime To Determine The Continued Capability Of The Supplier To Control The Quality Of The Products Or Services specified In The Purchase Order Or Contract. 3.35.2 The Prime Contractor Must Ensure That The Purchased Product Conforms To Specified Purchase Requirements And This Contract. The Type And Extent Of Control Applied To The Supplier And The Purchased Product Must Be Dependent Upon The Effect Of The purchased Product On The End Item Represented By This Contract. 3.35.3 The Prime Contractor Must Evaluate The Requirements Of The Contract And Select Suppliers Based On Their Ability To Supply The Product In Accordance With The Prime Contractor's Requirements And The Contract. Criteria For Selection And Evaluation Must be Established. Records Of This Effort Must Be Available For Review By The Government. 3.35.4 The Prime Contractor's Supplier Quality Assurance Program Must Provide For A Review Of Purchase Documents To Assure Applicable Quality Requirements Are Included Or Referenced In The Documentation For Compliance By The Supplier. 3.36 Government Furnished Material And/or Equipment (gfm/gfe) - When Material Or Equipment Is Furnished By The Government, The Contractor Must Develop Documented Control Procedures That Require At Least The Following: 3.36.1 Visual Examination Upon Receipt To Detect Damage During Transit. 3.36.2 Inspection For Completeness And Proper Type. 3.36.3 Verification Of Material Quality Received. 3.36.4 Periodic Inspection And Precautions To Assure Adequate Storage Conditions And To Guard Against Damage From Handling And Deterioration During Storage. 3.36.5 Functional Testing, Either Prior To Or After Installation, Or Both, As Required By The Contract To Determine Satisfactory Operation. 3.36.6 Identification And Protection From Improper Use Or Disposition. 3.36.7 Reporting To The Government, Any Gfm Or Gfe Property Found Damaged, Malfunctioning, Or Otherwise Unsuitable For Use. In The Event Of Damage Or Malfunction During Or After Installation, The Supplier Must Determine And Record Probable Cause And necessity For Withholding The Material From Use. 3.36.8 For Gfe Material, And As Required By The Terms Of The Bailment Agreement, The Supplier Must Establish Procedures For Adequate Storage, Maintenance, And Inspection Of Bailed Government Material. Records Of All Inspection And Maintenance Performed On bailed Property Must Be Maintained. 3.36.9 Material Returned To The Contractor Must Be Handled As Gfm. 3.37 Traceability And Certification Requirements - To Assure That Correct Materials Are Installed In Level I/subsafe Systems, It Is Imperative That Traceability Be Maintained From The Material To The Material Certification Test Report And Other Required objective Quality Evidence (oqe). The Material Certification Report Must Completely And Accurately Reflect That The Material Supplied Meets The Specified Requirements. Materials Requiring Traceability And Certification Data Are Identified Within Paragraph 3, section C Of This Contract/purchase Order. 3.37.1 The Following Provides The Minimum Requirements For Maintaining Material Traceability And Supplements The Requirements Specified In Di-misc-81020 And Elsewhere In The Contract/purchase Order. The Contractor Must Develop Written Procedures That implement The Material Control Requirements Stated Herein. 3.38 Material Traceability - The Certification Data Report Must Be Identified Through A Unique Traceability Number, Heat-lot Number, Or Heat-treat Number For Metallic Material Or Batch Of Non-metallic Material, As Applicable, Which Must Also Be Marked On The material. This Traceability Marking On The Material Must Provide Direct Traceability To The Material's Chemical Composition And Mechanical Properties Certification Data. For Material Produced By Batch, Continuous Cast, Or Continuous Pour Processes, Samples must Be Taken No Less Than Once In Every Eight Hours Of Operation For The Purpose Of Validating Proper Chemical Composition And Mechanical Properties. Traceability Must Be Maintained Through All Process Operations Including Any Subcontracted Operations, To The finished Component. 3.38.1 Material Marking For Traceability And Identification - The Following Are The Minimum Marking Requirements. Additional/alternate Marking Requirements, If Applicable, Will Be Specified Elsewhere In The Contract/purchase Order. In Addition To The marking Requirements On Applicable Drawings And/or Specifications, Marking For Traceability Is Required. All Traceability Markings Must Be Permanently Applied In Accordance With Mil-std-792 (except As Specified Below). An Alternate Marking Method Is permissible Provided It Is An Available Option In The Contractually Invoked Specification Or Drawing, Except In Instances Where The Material Has Been Modified By This Contract/purchase Order And Differs From That Specified In The Specification Or Drawing. 3.38.2 Traceability Markings For Items With Precision Machined Or Plated Surfaces, Or Material With Suitable Marking Surface Areas Less Than 3/8 Inches Square (either 3/8" X 3/8" Or An Area Equal To 0.1406 Inches Square) Must Be Applied To A Durable Tag And the Tag Securely Affixed To The Material. 3.38.3 Permanent Marking Must Be Legible And Must Be Located So As To Not Affect The Form, Fit, And Function Of The Material. ;ball Must Be Marked In The Waterway And The Seats Must Be Marked On The Outer Cylindrical Surface.; 3.38.4 Seat Marking - Each Seat Must Be Permanently Marked In Accordance With Mil-std-792, Type I And As Stated Below, Except For Teflon Seats, Which Must Only Be Tagged. Type Ix Marking May Be Substituted For Type I, Provided The Minimum Character Size scribed By The Marking Tool Must Be Approximately 3/32 Inch High To Insure Legibility. Permanent Marking Is Not Permitted On Teflon Seats. seat Marking Requirements Must Maintain Complete Traceability To Certification Oqe. Seat Marking Must Be Either Heat/lot Or Batch Number, A Vendor Traceability Number/code, Or A Combination Thereof And Must Be Unique To The Material Certification. 3.38.5 Traceability Markings Must Be Maintained Through Assembly, And Whenever Possible Must Be Visible After Assembly. For Items Where The Marking Is Not Visible After Assembly, A Durable Tag Must Be Securely Attached To The Item Identifying The Part number, Piece Number, Traceability Number, And The Location Of The Permanent Mark. 3.39 See Cdrl-di-misc-81020 (chemical And Mechanical) And Cdrl Di-misc-80678 (seat Material) - Material Certifications - The Following Material Certification Requirements Apply: 3.39.1 Metallic Material - Quantitative Chemical And Mechanical Analysis Of Material Traceable To Traceability Markings Is Required. Material Certification Test Reports Must Include The Class, Form, Condition, Grade, Type, Finish, And/or Composition, As applicable, Of The Material Supplied. 3.39.2 Non-metallic Material - The Contractor Must Furnish The Applicable Test Reports For Each Heat/lot/batch Of Seat Material. Material Certification Test Reports Must Include, In Addition To The Specification, The Class, Form, Grade, Type, Process, And/or composition, As Applicable, Of The Material Supplied. 3.39.3 Re-identification And Re-certification Of Metallic Material Is Required When The Material Is Subjected To A Process Which Alters Its Properties. If The Starting Material Or Raw Stock Is Processed In A Manner That Will Not Affect Its Chemical composition Or Mechanical Properties, The Original Certifications For The Chemical Composition And Mechanical Properties, As Required By The Material Specification, Are Acceptable. Re-certification Of The Chemical Or Mechanical Properties Is Required If A process Is Used During Fabrication That Alters The Original Properties Of The Material (e.g. Alloying, Heat Treating, Or Forming). In These Instances, The Properties Of The Material Must Be Re-determined And Documented To Reflect The Altered Condition. The altered Material Must Be Uniquely Re-identified. The Properties Thus Determined And Documented, Are Required For Final Certification And Must Conform To The Material Specification Or The Contract/purchase Order Requirements. When Only The Mechanical Properties are Altered, The Original Certification Forchemical Composition Must Be Overstamped And Annotated With The Unique Traceability Marking Used With The Altered Material And At A Minimum Contain The Information Below. traceability Marking________________________________________________ (marking On Finished Item) is Fabricated From Raw Material Identified To heat/lot Number _______________ And Heat Treat Number ______________________ (when Applicable) _________________________________________ Date _____________________ (name And Signature Of Auth. Co. Rep.) 3.39.4 Material Certification Data Forwarded By The Manufacturer Must Contain A Signed Certification That The Report Results Represent The Actual Attributes Of The Material Furnished And Indicate Full Compliance With All Applicable Specification And Contract requirements. Transcription Of Certification Data Is Prohibited. 3.39.5 Statements On Material Certification Documents Must Be Positive And Unqualified. Disclaimers Such As "to The Best Of Our Knowledge" Or "we Believe The Information Contained Herein Is True" Are Not Acceptable. 3.39.6 If Material Is Received Without The Required Certification Papers Or With Incorrect/missing Data On The Certification Papers, The Material Will Be Rejected. 3.40 Material Handling - The Written Material Control Process Must Include The Following: 3.40.1 All Raw Materials Must Have Traceability Markings (except As Specified Below). 3.40.2 Stored Raw Materials Requiring Traceability Must Be Segregated To Preclude Intermingling With Materials Not Requiring Traceability. 3.40.3 When Traceability Markings Will Be Removed By A Manufacturing Or Fabrication Process, The Marking Must Be Recorded Prior To Removal And Be Immediately Restored Upon Completion Of The Process. If This Cannot Be Done Or Is Impractical, An Appropriate material Control Procedure (such As A Bag And Tag, Tagging, And/or Tote Box Control) Must Be Employed. The Material Control Procedure Must Provide A Method Of Positive Control To Preclude Commingling Of Heats/lots Or Loss Of Traceability. The Traceability marking Must Be Reapplied Upon Completion Of The Final Manufacturing Process. 3.40.4 Brazing Or Weld Filler Metals For Strength Welds Forming Or Integral With Pressure Containing Components Or Assemblies Requiring Traceability Must Be Verified To Be The Correct Material, And Type Or Grade, As Applicable, Prior To Consumption.

Description: Contact Information|4|n743.7|wve|717-605-3875|jill.sabol@navy.mil| item Unique Identification And Valuation (mar 2022)|19|||||||||||||||||||| higher-level Contract Quality Requirement (navicp Review Feb 1991)(feb 1999)|1|see Specification Section C| inspection Of Supplies--fixed-price (aug 1996)|2||| inspection And Acceptance - Short Version|8|x||x|||||| wide Area Workflow Payment Instructions (dec 2018)|16|material - Invoice & Receiving Report (combo) Certifications - Stand-alone Receiving Report |material - Inspection & Acceptance At Source Certifications - Inspection At Destination & Acceptance At Other |tbd|n00104|tbd|certifications - N39040; Material -s4306a |n50286|tbd|133.2|n/a|n/a|certifications - N39040|n/a|n/a|see Dd Form 1423|port_ptnh_wawf_notification@navy.mil| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| warranty Of Supplies Of A Noncomplex Nature (june 2003)|6|one Year From The Date Of Delivery |one Year From The Date Of Delivery ||||| warranty Of Data--basic (mar 2014)|2||| transportation Of Supplies By Sea (feb 2019)|2||| first Article Approval--government Testing (sep 1989)|7|one|0001ac|180|receiving Officer, Code 526, Portsmouth Naval Shipyard, Portsmouth, Nh 03804-5000; Mf Equipment Testing Laboratory, Code 270.1 |30||| notice Of Total Small Business Set-aside (oct 2020)(deviation 2020-o0008)|1|| alternate A, Annual Representations And Certifications (nov 2020)|13|||||||||||||| annual Representations And Certifications (may 2022)|13|334220|1250|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| the Hour And Date Specified For Receipt Of Offers Has Been Extended To 4:30pm Est On 31 January 2025. the Small Business Set-aside Is Been Dissolved. 1. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractor's Written Acceptance Prior To Execution. 2. Any Contract/order Awarded As A Result Of This Solicitation Will Be A "do" Rated Order Certified For National Defense Use Under The Defense Priorities And Allocations System (dpas). See 52.211-14, Notice Of Priority Rating For National Defense, Emergency preparedness, And Energy Program Use. 3. Only Those Sources With An Acceptable Quality Assurance Manual Are Eligible For Award Under This Solicitation. The Navy Has Found From Past Experience That Quality Control Is Essential To Assure Personnel Safety In Critical Areas And To Provide For The Safe operation Of Submarines And Certain Systems On Surface Ships. See Wssterm Lz02. Vendors Submitting Quality Manuals Shall Submit Them To Jill.sabol@navy.mil Instead Of 0243.qamanual@navy.mil. 4. All Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders And Modifications) Related To The Instant Procurement Are Considered To Be "issued" By The Government When Copies Are Either Deposited In The Mail, Transmitted By facsimile, Or Sent By Other Electronic Commerce Methods, Such As Email. The Government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To "issue" Contractual Documents As Detailed Herein. 5. Navsup Wss Mech Will Be Considering Past Performance In The Evaluation Of Offers. 6. If Drawings Are Included In The Solicitation, Access Must Be Requested On The Individual Solicitation Page On Contract Opportunities Via The Government's Sam.gov Website. Include Your Cage Code In Your Request. 7. Unless Otherwise Stated On The Dd1423, Submission Of Dd1423 Certification Data (cdrls) Will Be On Or Before 20 Days Prior To The Material (line Item 0001aa) Delivery Date. Pnsy Review/acceptance Of Cdrls Shall Be 6 Working Days After Receipt Of Cdrls. Final delivery Of Material Will Be On Or Before 500 Days After The Effective Date Of The Order. 8. This Procurement Has First Article Test Requirements. \ 1. Scope 1.1 The Material Covered In This Contract/purchase Order Will Be Used In A Crucial Shipboard System. The Use Of Incorrect Or Defective Material Would Create A High Probability Of Failure Resulting In Serious Personnel Injury, Loss Of Life, Loss Of Vital shipboard Systems, Or Loss Of The Ship Itself. Therefore, The Material Has Been Designated As Special Emphasis Material (level I, Scope Of Certification, Or Quality Assured) And Special Control Procedures Are Invoked To Ensure Receipt Of Correct Material. 2. Applicable Documents 2.1 Order Of Precedence - In The Event Of A Conflict Between The Text Of This Contract/purchase Order And The References And/or Drawings Cited Herein, The Text Of This Contract/purchase Order Must Take Precedence. Nothing In This Contract/purchase Order, however, Must Supersede Applicable Laws And Regulations Unless A Specific Exemption Has Been Obtained. 2.2 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.2.1 Documents, Drawings, And Publications Supplied Are Listed Under "drawing Number". These Items Should Be Retained Until An Award Is Made. 2.2.2 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 2.2.3 Specification Revisions - The Specification Revisions Listed Under "documents References" Below Are The Preferred Revision. Older And/or Newer R Evisions Are Acceptable When Listed Within Contract Support Library Reference Number Csd155 In Ecds (electric contractor Data Submission) At: Ht Tps://register.nslc.navy.mil/. This Is To Allow Contractors To Use Certain Acceptable Older Specification Revisions To Purge Their Existing Stock Of Material Certified To Those Older Revisions Or To Use Newer Specification revisions When Material Is Certified To Newly Released Revisions,without Requiring The Submittal Of Waiver/deviation Requests For Each Specification Revision On Every Contract. Revisions Of Specifications Reflecting Editorial And/or Re-approval (e.g. E2009, r2014, Etc.) Are Considered Inconsequential, But Are Acceptable When Their Revisions Are Listedwithin Csd155 Or Elsewhere Within This Contract. drawing Data=cpg1022-1 |96169| D| |d|0000.a | D|49998|0074948 drawing Data=cpg1022-1 |96169| D| |d|0000.b | C|49998|0129832 drawing Data=cpg1022-1 |96169| D| |d|0000.c | D|49998|0016731 drawing Data=cpg1022-1 |96169| D| |d|0001 | D|49998|0095662 drawing Data=cpg1022-1 |96169| D| |d|0002 | C|49998|0048488 drawing Data=cpg1022-1 |96169| D| |d|0003 | C|49998|0049407 drawing Data=cpg1022-1 |96169| D| |d|0004 | D|49998|0061828 drawing Data=cpg1022-1 |96169| D| |d|0005 | B|49998|0017369 drawing Data=cpg1022-1 |96169| D| |d|0006 | D|49998|0024738 drawing Data=cpg1022-1 |96169| D| |d|0007 | B|49998|0020905 drawing Data=cpg1022-1 |96169| D| |d|0008 | D|49998|0019097 drawing Data=cpg1022-1 |96169| D| |d|0009 | C|49998|0017763 drawing Data=cpg1022-1 |96169| D| |d|0010 | D|49998|0055696 drawing Data=cpg1022-1 |96169| D| |d|0011 | B|49998|0015906 drawing Data=cpg1025 |96169| P| |d|0001 | P|49998|0031294 drawing Data=cpg1025 |96169| P| |d|0002 | P|49998|0013077 drawing Data=cpg1025 |96169| P| |d|0003 | P|49998|0011923 drawing Data=cpg1025 |96169| P| |d|0004 | P|49998|0021385 drawing Data=cpg1025 |96169| P| |d|0005 | P|49998|0020123 drawing Data=cpg1025 |96169| P| |d|0006 | P|49998|0012596 drawing Data=cpg1025 |96169| P| |d|0007 | P|49998|0020575 drawing Data=cpg1025 |96169| P| |d|0008 | P|49998|0025829 drawing Data=cpg1025 |96169| P| |d|0009 | P|49998|0025129 drawing Data=cpg1025 |96169| P| |d|0010 | P|49998|0025305 drawing Data=cpg1025 |96169| P| |d|0011 | P|49998|0026218 drawing Data=cpg1025 |96169| P| |d|0012 | P|49998|0023610 drawing Data=cpg1025 |96169| P| |d|0013 | P|49998|0024504 drawing Data=cpg1025 |96169| P| |d|0014 | P|49998|0020909 drawing Data=cpg1025 |96169| P| |d|0015 | P|49998|0025043 drawing Data=cpg1025 |96169| P| |d|0016 | P|49998|0024761 drawing Data=cpg1025 |96169| P| |d|0017 | P|49998|0027299 drawing Data=cpg1025 |96169| P| |d|0018 | P|49998|0042937 drawing Data=cpg1025 |96169| P| |d|0019 | P|49998|0040502 drawing Data=cpg1025 |96169| P| |d|0020 | P|49998|0036449 drawing Data=cpg1025 |96169| P| |d|0021 | P|49998|0036830 drawing Data=cpg1025 |96169| P| |d|0022 | P|49998|0033796 drawing Data=cpg1025 |96169| P| |d|0023 | P|49998|0027339 drawing Data=cpg1025 |96169| P| |d|0024 | P|49998|0041721 drawing Data=cpg1025 |96169| P| |d|0025 | P|49998|0036782 drawing Data=cpg1025 |96169| P| |d|0026 | P|49998|0037911 drawing Data=cpg1025 |96169| P| |d|0027 | P|49998|0019706 drawing Data=cpg1025 |96169| P| |d|0028 | P|49998|0031258 drawing Data=cpg1025 |96169| P| |d|0029 | P|49998|0028386 drawing Data=cpg1025 |96169| P| |d|0030 | P|49998|0034996 drawing Data=cpg1025 |96169| P| |d|0031 | P|49998|0037489 drawing Data=cpg1025 |96169| P| |d|0032 | P|49998|0026677 drawing Data=cpg1025 |96169| P| |d|0033 | P|49998|0017312 drawing Data=cpg1025 |96169| P| |d|0034 | P|49998|0030851 drawing Data=cpg1025 |96169| P| |d|0035 | P|49998|0028589 drawing Data=cpg1025 |96169| P| |d|0036 | P|49998|0009063 drawing Data=cpg1025 |96169| P| |d|0037 | P|49998|0004112 drawing Data=cpg1025 |96169| P| |d|0038 | P|49998|0013152 drawing Data=cpg1025 |96169| P| |d|0039 | P|49998|0009572 drawing Data=cpg1025 |96169| P| |d|0040 | P|49998|0012321 drawing Data=cpg1025 |96169| P| |d|0041 | P|49998|0009310 drawing Data=cpg1025 |96169| P| |d|0042 | P|49998|0006784 drawing Data=cpg1025 |96169| P| |d|0043 | P|49998|0006124 drawing Data=cpg1025 |96169| P| |d|0044 | P|49998|0008489 drawing Data=cpg1025 |96169| P| |d|0045 | P|49998|0007044 drawing Data=cpg1025-1 |96169| M| |d|0000.a | M|49998|0758554 drawing Data=cpg1025-1 |96169| M| |d|0000.b | G|49998|1277830 drawing Data=cpg1025-1 |96169| M| |d|0000.c | M|49998|0763525 drawing Data=cpg1025-1 |96169| M| |d|0001 | L|49998|1091102 drawing Data=cpg1025-1 |96169| M| |d|0002 | M|49998|1201771 drawing Data=cpg1025-1 |96169| M| |d|0003 | L|49998|1102853 drawing Data=cpg1025-1 |96169| M| |d|0004 | E|49998|0841196 drawing Data=cpg1025-1 |96169| M| |d|0005 | D|49998|0392069 drawing Data=cpg1025-1 |96169| M| |d|0006 | B|49998|0547744 drawing Data=cpg1025-1 |96169| M| |d|0007 | D|49998|0409468 drawing Data=cpg1025-1 |96169| M| |d|0008 | B|49998|0424196 drawing Data=cpg1025-1 |96169| M| |d|0009 | L|49998|0555538 drawing Data=cpg1025-1 |96169| M| |d|0010 | J|49998|0536845 drawing Data=cpg1025-1 |96169| M| |d|0011 | B|49998|0594238 drawing Data=cpg1025-1 |96169| M| |d|0012 | A|49998|0635118 drawing Data=cpg1025-1 |96169| M| |d|0013 | F|49998|0683845 drawing Data=cpg1025-1 |96169| M| |d|0014 | C|49998|0649459 drawing Data=cpg1025-1 |96169| M| |d|0015 | A|49998|0543639 drawing Data=cpg1025-1 |96169| M| |d|0016 | C|49998|0683318 drawing Data=cpg1025-1 |96169| M| |d|0017 | D|49998|0554866 drawing Data=cpg1025-1 |96169| M| |d|0018 | D|49998|0421953 drawing Data=cpg1025-1 |96169| M| |d|0019 | K|49998|0559184 drawing Data=cpg1025-1 |96169| M| |d|0020 | K|49998|0762215 drawing Data=cpg1025-1 |96169| M| |d|0021 | M|49998|0397387 drawing Data=cpg1025-2 |96169| K| |d|0000.a | K|49998|0360625 drawing Data=cpg1025-2 |96169| K| |d|0000.b | D|49998|0070485 drawing Data=cpg1025-2 |96169| K| |d|0000.c | K|49998|0359139 drawing Data=cpg1025-2 |96169| K| |d|0001 | J|49998|0498469 drawing Data=cpg1025-2 |96169| K| |d|0002 | K|49998|0607194 drawing Data=cpg1025-2 |96169| K| |d|0003 | G|49998|0491202 drawing Data=cpg1025-2 |96169| K| |d|0004 | E|49998|0491268 drawing Data=cpg1025-2 |96169| K| |d|0005 | F|49998|0659594 drawing Data=cpg1025-2 |96169| K| |d|0006 | F|49998|0049431 drawing Data=cpg1025-2 |96169| K| |d|0007 | F|49998|0566711 drawing Data=cpg1025-2 |96169| K| |d|0008 | D|49998|0028577 drawing Data=cpg1025-2 |96169| K| |d|0009 | D|49998|0032712 drawing Data=cpg1025-2 |96169| K| |d|0010 | D|49998|0014537 drawing Data=cpg1025-2 |96169| K| |d|0011 | D|49998|0017877 drawing Data=cpg1025-2 |96169| K| |d|0012 | D|49998|0014800 drawing Data=cpg1025-2 |96169| K| |d|0013 | D|49998|0017435 drawing Data=cpg1025-2 |96169| K| |d|0014 | D|49998|0019633 drawing Data=cpg1025-2 |96169| K| |d|0015 | H|49998|0360727 drawing Data=cpg1025-2 |96169| K| |d|0016 | K|49998|0452047 drawing Data=cpg1025-2 |96169| K| |d|0017 | K|49998|0289051 drawing Data=d135925 |13030| J| |d|0001 | J|49998|0172425 document Ref Data=fed-std-h28 | | |b |190424|a| | | document Ref Data=fed-std-h28 |0020| |b |941221|a| |01| document Ref Data=ansi/asq Z1.4 | | | |080101|a| | | document Ref Data=qq-n-286 | | |g |001207|a| | | document Ref Data=mil-std-792 | | |f |060519|a| | | document Ref Data=mil-std-2035 | | |a |950515|a| | | document Ref Data=mil-std-2132 | | |d |080310|f| |01| document Ref Data=iso_9001 | | | |081115|a| | | document Ref Data=iso10012 | | | |030415|a| | | document Ref Data=iso/iec 17025 | | | |050515|a| | | document Ref Data=mil-i-45208 | | |a |810724|a| 1| | document Ref Data=mil-std-45662 | | |a |880801|a| | | document Ref Data=a-a-59004 | | |b |181118|a| | | document Ref Data=ansi/ncsl Z540.3 | | | |130326|a| | | document Ref Data=0900-lp-001-7000 | | | |810101|c| |01| document Ref Data=s9074-aq-gib-010/248 | | |1 |191112|a| | | document Ref Data=t9074-as-gib-010/271 | | |1 |140911|a| | | document Ref Data=s9074-ar-gib-010a/278 (chg A) | | | |130214|a| | | 3. Requirements 3.1 ;hull Penetrator Assembly Must Be In Accordance With Spears Associates Inc. Drawing D135925; Assembly D135925-1, And General Dynamics Specification Cpg 1025, Less Piece 19, Except As Amplified Or Modified Herein.; 3.2 First Article Approval (government Testing) - First Article Test (fat) And Approval Is Required. 3.3 ;the Fat Sample(s) Must Not Be Delivered Against The Contract Quantity.; 3.4 ;paragraph 4.1 Of Cpg 1025 Does Not Apply.; 3.5 Material For Parts Requiring Certification - Quantitative Chemical And Mechanical Analysis Is Required For The Parts Listed Below Unless Specifically Stated Otherwise: part - ;hull Penetrator Body (cpg 1025/2-003), Nut (cpg 1022/1-005), And Washer (cpg 1025/1-005); material - ;qq-n-286, Form 2 Or Form 7, Annealed And Age Hardened. Mechanical Properties To Be In Accordance With Cpg 1025, Paragraph 3.3.2; 3.6 Testing Certification - Certifications Are Required For The Following Tests On The Items Listed Below. Additional Testing On Other Piece Parts (if Any) Per Applicable Drawings Is Still Required, But Certifications Are Only Required As Listed Below. test - Quality Conformance/compliance Inspection item - ;each Hull Penetrator Assembly; performance - ;cpg 1025, Paragraph 4.5; acceptance - ;cpg 1025, Paragraph 4.5; attribute - Annealing And Age Hardening item - ;each Hull Penetrator Body (cpg 1025/2-003), Nut (cpg 1022/1-005), And Washer (cpg 1025/1-005); performance - Qq-n-286 test - Ultrasonic Inspection On Starting Material item - ;all Items Requiring Certification Made From Qq-n-286 With A Diameter Or Minimum Distance Between Parallel Surfaces Of 4 Inches Or Greater Of The Starting Material, Or When Required By A Drawing Or Specification Invoked Elsewhere In This Contract; performance - T9074-as-gib-010/271 Or Mil-std-2132, And Qq-n-286 acceptance - Qq-n-286 attribute - Time Temperature Plots And Certified Calibration Records Of Furnace Temperature Measuring Devices item - ;each Hull Penetrator Body (cpg 1025/2-003), Nut (cpg 1022/1-005), And Washer (cpg 1025/1-005); performance - ;when Required By Cpg 1025, Paragraph 3.3.1.2; test - ;dye Penetrant Inspection; item - ;each Penetrator Body (cpg 1025/2-003), Nut (cpg 1022/1-005), And Washer (cpg 1025/1-005); performance - T9074-as-gib-010/271 acceptance - Mil-std-2035 3.7 The Pressure Tolerance Must Be As Specified In The Assembly Drawing, Detail Drawing, Design Specification Or Elsewhere In This Contract. Where Pressure Tolerances Are Not Provided By Drawings, Specifications Or Specified Elsewhere In This Contract, The following Must Be Used: For Pressure Tests Below 100 Psig, The Pressure Tolerance Must Be +1 Psig / -0 Psig. For Pressure Tests At Or Above 100 Psig Up To And Including 2500 Psig, The Pressure Tolerance Must Be +2% / -0 Psig Rounded Off To The Nearest Multiple Of The Smallest Graduation On An Analog Test Pressure Gauge, Not To Exceed 50 Psig. For Pressure Tests Above 2500 Psig, The Pressure Tolerance Must Be +2% / -0 Psig, Rounded Off To The Nearest Multiple Of The Smallest Graduation On An Analog Test Pressure Gauge, Not To Exceed 200 Psig. the Pressure Test Time Tolerance Must Be As Specified In The Assembly Drawing, Detail Drawing, Design Specification Or Elsewhere In This Contract. Where Pressure Test Time Tolerances Are Not Provided By Drawings, Specifications Or Specified Elsewhere In This contract, The Following Must Be Used: For A Test Duration Up To And Including 1 Hour, The Tolerance Must Be +5 Minutes / - 0 Minutes. For A Test Duration Of More Than 1 Hour Up To And Including 24 Hours, The Tolerance Must Be +30 Minutes / - 0 Minutes. For A Test Duration Of More Than 24 Hours, The Tolerance Must Be +60 Minutes / - 0 Minutes. 3.8 Thread Inspection Requirements - All Threads On Threaded Parts Must Be Inspected Using Appropriate Inspection Methods, Inspection Systems, And Inspection Gages/instruments In Accordance With Fed-std-h28 Series. Substitution Of Thecommercial Equivalent inspection In Accordance With Asme B1 Series Is Acceptable. 3.8.1 System 21 Of Fed-std-h28/20 Must Be Used As A Minimum Inspection Requirement For Threads When The Design Drawing Or Design Specification Does Not Specify An Inspection Requirement. 3.8.2 For Navy And Shipyard Drawings, System 21 Of Fed-std-h28/20 May Be Substituted For System 22 Without Further Navy Approval When The Design Drawing Invokes System 22 And Does Not Cite Governing Specifications That Specifically Require System 22. System 22 of Fed-std-h28/20 Must Be Used When The Drawing References Other Governing Specifications That Specifically Require System 22, Such As Certain Thread Types Of Mil-dtl-1222. 3.8.3 A Written Request For Concurrence Must Be Submitted When Utilizing Alternative Measuring Equipment Or Measuring Systems Not Applicable To The Specified Inspection System. 3.9 Welding Or Brazing - When Welding, Brazing, And Allied Processes Are Required, As Invoked By Section C Paragraph 3 Requirements, They Must Be In Accordance With S9074-ar-gib-010a/278, 0900-lp-001-7000 For Brazing Of Piping And Pressure Vessel Applications, or S9074-aq-gib-010/248 For Brazing Of Other Applications. For All Production And Repair Welding And Brazing, Personnel And Procedures Must Be Qualified Under S9074-aq-gib-010/248 Or 0900-lp-001-7000, As Applicable. Repair Welding Is Not Permitted On ;hull penetrator Body (cpg 1025/2-003), Nut (cpg 1022/1-005), And Washer (cpg 1025/1-005); . Procedures And Qualification Data Must Be Submitted For Review And Approval Prior To Performing Any Welding Or Brazing. 3.10 Internal Threads - All Internal Threads Must Be Formed By Cutting. Cold Forming Of Internal Threads Is Not Acceptable. 3.11 Slow Strain Rate Tensile Test Laboratories - The Slow Strain Rate Tensile Test Of Qq-n-286 Must Be Performed By One Of The Following Laboratories: huntington Alloys, A Special Metals Company attn: Bill Bolenr 3200 Riverside Drive huntington, Wv 257059 phone: (304) 526-5889 fax: (304) 526-5973 metallurgical Consultants, Inc. attn: W. M. Buehler 4820 Caroline po Box 88046 houston, Tx 77288-0046 phone: (713) 526-6351 fax: (713) 526-2964 naval Surface Warfare Center, Carderock Division attn: Eric Focht Code 614 9500 Macarthur Blvd west Bethesda, Md 20817-5700 phone: (301) 227-5032 fax: (301) 227-5576 teledyne Allvac attn: Dr. W. D. Cao 2020 Ashcraft Ave. monroe, Nc 28110 phone: (704) 289-4511 fax: (704) 289-4269 westmoreland Mechanical Testing And Research Inc. attn: Andrew Wisniewski p.o. Box 388 youngstown, Pa 15696-0388 mannesmann Rohrenwerke mannesmann Forschungsinstitut (mfi) attn: Dr. Weiss postfach 251160 47251 Duisburg germany phone: 011-49-0203-9993194 fax: 011-49-0203-9994415 thyssenkrupp Vdm Usa, Inc. attn: D. C. Agarwal 11210 Steeplecrest Drive, Suite 120 houston, Tx 77065-4939 phone: (281) 955-6683 3.12 Thread Lubricant - Thread Lubricants Containing Molybdenum Disulfide Must Not Be Used On This Material. Bacteria In Water, Especially Seawater, Causes Molybdenum Disulfide To Break Down. The By-products Of The Breakdown Form Compounds Which Attack The fasteners. Anti-galling Compound A-a-59004 Must Be Used As A Replacement When Thread Lubricant Is Required For Assembly. 3.13 O-ring Grooves And Mating Sealing Surfaces Must Be Inspected Per The Contractually Invoked Drawings Or Specifications. When The Drawings Or Specifications Do Not Provide Specific Defect Criteria Or State That No Defects Are Allowed, The General acceptance Criteria (gac) Standard Must Be Used For Inspecting O-ring Grooves And Mating Sealing Surfaces Only. Repairs To Sealing Surfaces And O-ring Grooves With Unacceptable Defects May Be Accomplished Within The Limits Of The Size And Tolerances Provided in The Applicable Drawing. Repairs Thatwould Exceed These Limits Require Approval (including Final Dimensions). The Data That Is Red Lined (crossed Out) Is Excluded From The Gac For This Contract And Is Not To Be Used For Acceptance Or Rejection Criteria. the Gac Document Is Identified As Contract Support Library Reference Number Csd008 At Https://register.nslc.navy.mil/ 3.14 Configuration Control - The Contractor Must Maintain The Total Equipment Baseline Configuration. For Items Of Proprietary Design, Contractor Drawings Showing The Latest Assembly Configuration Must Be Provided To The Government In Electronic (c4) Format. definitions Are Provided Elsewhere In The Contract/purchase Order. 3.14.1 Waivers/deviations - All Waivers And Deviations, Regardless Of Significance Or Classification Require Review And Approval By The Contracting Officer. Waivers And Deviations Must Be Designated As Critical, Major, Or Minor. The Contractor Must Provide a Copy Of This Request To The Qar. Requests Must Include The Information Listed Below. A. A Complete Description Of The Contract Requirement Affected And The Nature Of The Waiver/deviation (non-conformance), Including A Classification Of Critical, Major, Or Minor. B. Number Of Units (and Serial/lot Numbers) To Be Delivered In This Configuration. C. Any Impacts To Logistics Support Elements (such As Software, Manuals, Spares, Tools, And Similar) Being Utilized By Government Personnel Or Impacts To The Operational Use Of The Product. D. Information About Remedial Action Being Taken To Prevent Reoccurrence Of The Non-conformance. 3.14.2 All Requests For Waivers/deviations On Navsup-wss Contracts Must Be Submitted Using The Ecds (electronic Contractor Data Submission) System At Https://register.nslc.navy.mil/ 3.14.3 Ecps - The Government Will Maintain Configuration Control And Change Authority For All Modifications Or Changes Affecting Form, Fit, Function, Or Interface Parameters Of The Equipment And Its Sub-assemblies. The Contractor Must Submit An Engineering change Proposal (ecp) For Any Class I Or Ii Changes That Impact The Equipment Covered By This Contract. Ecps Must Be Prepared In Contractor Format, And Must Include The Following Information: A. The Change Priority, Change Classification (class I Or Class Ii), And Change Justification. B. A Complete Description Of The Change To Be Made And The Need For That Change. C. A Complete Listing Of Other Configuration Items Impacted By The Proposed Change And A Description Of The Impact On Those Cis. D. Proposed Changes To Documents Controlled By The Government. E. Proposed Serial/lot Number Effectivities Of Units To Be Produced In, Or Retrofitted To, The Proposed Configuration. F. Recommendations About The Way A Retrofit Should Be Accomplished. G. Impacts To Any Logistics Support Elements (such As Software, Manuals, Spares, Tools, And Similar) Being Utilized By Government Personnel In Support Of The Product. H. Impacts To The Operational Use Of The Product. I. Complete Estimated Life-cycle Cost Impact Of The Proposed Change. J. Milestones Relating To The Processing And Implementation Of The Engineering Change. 3.15 Navsea 0948-lp-045-7010 - Any Applicable Requirements Of Navships 4410.17,navsea 0948-lp-045-7010, Or 0948-045-7010 Which The Contractor Must Meet Are Included In This Contract/purchase Order. The Above Documents Are For Governmentuse Only. Further application Of The Above Documents Is Prohibited.prohibited. 3.15.1 Marking Of Material With A Material Designator Per The Drawing Is Also Prohibited, With The Exception Of Fasteners. Fasteners Must Be Marked With A Material Symbol/designator As Specified Elsewhere In This Contract. 3.16 Mercury Free - Mercury And Mercury Containing Compounds Must Not Be Intentionally Added Or Come In Direct Contact With Hardware Or Supplies Furnished Under This Contract. Mercury Contamination Of The Material Will Be Cause For Rejection. 3.17 Certificate Of Compliance - (special Emphasis Material) The Contractor Must Prepare And Submit A Certificate Of Compliance Certifying That The Items/components Furnished Under This Contract Comply With The Requirements Of The Procurement Document, including Any/all Invoked Specifications And Drawings. ^ Quality Assurance Requirements ^ 3.18 See Cdrl Di-misc-80678 (test Certification) - A Statement Of Tests Performed, Listing The Pieces Tested Must Be Furnished Along With A Copy Of The Test Results. Certification Must Include The Contractor's Name, Address And Date, Quantity Inspected, identified To The Contract/purchase Order And Item Number, And The Contractor's Or Authorized Personnel's Signature. Test Certifications Must Reference The Standard/specification, Including The Revision, To Which The Testing Was Performed And The Acceptance criteria Used. Test Procedure Numbers May Also Be Referenced On Test Reports. Test Reports On Weldments Must Be Identified To Weld Joint And Layer. 3.19 Welding Requirements - When Production Or Repair Welding Is Required, The Applicable Welding Procedure(s) And Qualification Data Must Be Submitted For Review And Approval. In Addition, The Consumed Weld Metal C Of C As Defined Below Must Be Submitted As part Of The Certification Oqe Package Submitted By The Contractor. note: These Requirements Do Not Apply To Tack/spot Welds. 3.19.1 Approval Of The Contractor's Qualification Data Must Be Obtained Prior To Performing Any Welding (production Or Repair). 3.19.2 If The Contractors Qualification Data Has Previously Been Approved By The Navy For Other Contracts, A Copy Of The Original Approval Letter May Be Submitted Along With The Procedures And Qualification Data Report To Expedite The Approval Process. The approval Letter Must Reference The Applicable Welding Procedure And Qualification Data Report Identification/number. Prior Approval Does Not Guarantee Acceptance For This Or Any Future Contracts. As Far As Practical, All Procedures For The Contract Must Be submitted At The Same Time. Welding Procedures And Qualification Data Must Be Submitted In A Commercially Available Electronic Format Such As Adobe Acrobat Pdf. The Contractor Must State The Applicability Of Each Weld Procedure And Qualification Data Submitted, citing The Drawing Number And Pieces To Be Welded. (i.e. ''wp-123 And Qd-123 Are Submitted For The Weld Joint Between Pieces 1 And 2 On Drawing Abc'.' Wp-456 And Qd-456 Are Submitted For The Hardfacing Of Piece 3 On Drawing Xyz'') 3.19.3 The Pco's Authorization For The Use Of Weld Procedure(s) And Qualification Data For The Specific Application As Submitted Does Not Mitigate The Vendors Responsibility To Comply With The Requirements Of S9074-aq-gib-010, S9074-ar-gib-010a/278,248d The contract. 3.19.4 Authority For The Repair Of Special Repairs In Castings, The Repair Of Wrought Material, Or The Repair Of Forged Material Must Be Obtained Via Request For Waiver From The Procurement Contracting Officer. This Request Must Describe The Defect; Including size, Depth, Location, And A Description Of The Proposed Repair. Repairs Deemed Minor Or Nominal In Accordance With S9074-ar-gib-010/278 Can Be Made At Contractor Discretion In Accordance With S9074-ar-gib-010/278 Requirements; However, Weld Procedure specification (wps) And Procedure Qualification Record (pqr) Submittals Are Still Required. This Request For Navsup-wss Contracts Must Be Submitted Via The Electronic Contractor Data Submission (ecds) Application. 3.19.5 Any New Procedure Qualification Performed Under This Contract Will Require The Vendor To Provide A Minimum 72 Hour Notification To Dcma With An Offer To Observe The Welding Of The Test Assemblies. The 72 Hour Time Limit May Be Modified Upon Mutual agreement Between The Vendor And Dcma. 3.19.6 When Drawings Require Hardfacing Surface Iron Or Nickel Content Not To Exceed 5%, The Contractor Must Verify Surface Iron Or Nickel Content By Performing Chemical Testing As Defined By The Applicable Drawing. The Chemical Test Results Must Be Submitted as Part Of The Qualification Data. 3.19.7 Additional Qualification Requirements For Production Hardfacing Thickness Less Than 1/8-inch: Macro-etch (or Legible Photomacrographs Clearly Showing The Fusion Area) Must Be Submitted For Review And Show Consistent, Minimized Dilution. All Essential elements And Any Elements Not Listed In S9074-aq-gib-010/248 That Influence Dilution Must Be In The Qualification Data And Weld Procedure, With Strict Limits Placed On Each Essential Element. 3.19.8 Preparation And Retention Of Weld Records Is Required, As Specified By Paragraph 4.1.3 Of S9074-ar-gib-010a/278. 3.19.9 When Production Or Repair Welding Is Required On Titanium Materials, Theapplicable Fabrication Plan, Facilities Procedure, Training Plan, And Active Welder Qualification Must Also Be Submitted For Review And Approval. 3.19.10 If The Contractor's Fabrication Plan, Facilities Procedure, Training Plan, Or Active Welder Qualification Has Previously Been Approved By The Navy For Other Contracts, A Copy Of The Original Approval Letter May Be Submitted Along With The Applicable documentation To Expedite The Approval Process. The Approval Letter Must Reference The Applicable Documentation. Prior Approval Does Not Guarantee Acceptance For This Or Any Future Contracts. The Contractor's Fabrication Plan, Facilities Procedure, Training plan, And Active Welder Qualification Must Be Submitted At The Same Time As The Applicable Welding Procedure(s) And Weld Procedure Qualification Data. All Documentation Must Be Submitted In A Commercially Available Electronic Format, Such As Adobe Acrobat Pdf. 3.19.11 A Certificate Of Compliance Is Required For All Weld Filler Metals Used For Production Or Repair Welding, And Must Include The Following: a) Filler Metal Lot Number(s) b) Specification And Type c) A Positive Statement That The Vendor Has Obtained Oqe And Verified That Each Lot Of Weld Filler Material Conforms To Specification Requirements. d) A Positive Statement Verifying That The Weld Filler Metals Were The Correct Material Type Or Grade Prior To Consumption. 3.19.12 When Production Welds Or Repair Welds Are Performed By A Subcontractor, The Requirement For Submission Of All Certification Documentation Required Herein Must Be Passed Down To The Subcontractor. 3.20 Quality System Requirements - The Contractor Furnishing Items Under This Contract/purchase Order Must Provide And Maintain A Quality System In Accordance With Iso-9001 As Amplified Or Modified Herein, With The Calibration System Requirements Of Iso-10012 or Ansi-z540.3 With Iso-17025. A Quality System In Accordance With Mil-i-45208, With The Calibration System Requirements Of Mil-std-45662, Is Acceptable As An Alternate. 3.20.1 The Contractor's Quality System And Products Supplied Under The System Are Subject To Evaluation, Verification Inspection, And Acceptance/nonacceptance By The Government Representative To Determine The System's Effectiveness In Meeting The Quality requirements Established In The Contract/purchase Order. 3.20.2 The Contractor's Quality System Must Be Documented And Must Be Available For Review By The Contracting Officer Or His Representative Prior To Initiation Of Production And Throughout The Life Of The Contract. The Prime Contractor Must, Upon notification, Make His Facilities Available For Audit By The Contracting Officer Or His Authorized Representative. 3.20.3 See Cdrl Di-qcic-81110 (inspection System Procedures) - All Suppliers Of Level I/subsafe (li/ss) Material Are Required To Submit A Copy Of Their Current Documented Quality System Procedures To The Procurement Contracting Officer (pco) Prior To Award Of any Contract/purchase Order. Suppliers That Have A Copy Of Their Current Quality System Procedures On File At The Procuring Activity May Request The Pco Waive This Requirement. 3.20.4 This Contract Provides For The Performance Of Government Quality Assurance At Source. The Place Or Places Of Performance May Not Be Changed Without The Authorization Of The Procurement Contracting Officer. Upon Receipt Of This Order, Promptly notify The Government Representative Who Normally Services Your Plant So That Appropriate Planning For Government Inspection Can Be Accomplished. If You Do Not Have An Assigned Government Representative, Notify The Nearest Defense Contract Management Agency (dcma) Office. In The Event That A Local Government Representative Or Dcma Office Cannot Be Located, Our Purchasing Agent Should Be Notified Immediately. 3.20.5 Any Changes Made By The Contractor To A Qualified Quality System Will Require Re-submittal To The Pco And Concurrence By The Government Quality Assurance Representative Prior To Adoption. 3.21 Contractor Inspection Requirements - The Contractor Must Maintain Adequate Records Of All Inspections And Tests. The Records Must Indicate The Nature And Number Of Observations Made, The Number And Type Of Deficiencies Found, The Quantities Approved And rejected And The Nature Of Corrective Action Taken As Appropriate. Inspection Records Must Be Traceable To The Material Inspected. 3.21.1 The Supplier's Gages, Measuring And Test Equipment Must Be Made Available For Use By The Government Representative When Required To Determine Conformance With Contract Requirements. When Conditions Warrant, The Supplier's Personnel Must Be Made available For Operations Of Such Devices And For Verification Of Their Accuracy And Condition. 3.21.2 All Documents And Reference Data Applicable To This Contract Must Be Available For Review By The Government Representative. Copies Of Documents Required For Government Inspection Purposes Must Be Furnished In Accordance With The Instructions Provided by The Government Representative. 3.22 Subcontractor Inspection Requirements - The Government Has The Right To Inspect At Source, Any Supplies Or Services That Were Not Manufactured Or Performed Within The Contractor's Facility. Such Inspection Can Only Be Requested By Or Under Authorization of The Government Representative. Any Purchasing Documents To A Subcontractor Must Cite The Applicable Portions Of The Contractually Invoked Quality System (e.g. Calibration Requirements), Plus Any Product Requirements That Apply To The Supplies Being purchased. When The Government Elects To Perform Source Inspection At The Subcontractor's Facility, Applicable Purchase Documents Must Be Annotated With The Following Statement: "a Government Inspection Is Required Prior To Shipment From Your Plant. Upon receipt Of This Order, Promptly Notify The Government Representative Who Normally Services Your Plant So That Appropriate Planning For Government Inspection Can Be Accomplished. If You Do Not Have An Assigned Government Representative, Notify The Nearest defense Contract Management Agency (dcma) Office. In The Event That A Local Government Representative Or Dcma Office Cannot Be Located, Our Purchasing Agent Should Be Notified Immediately." 3.22.1 The Prime Contractor's Program Must Include Procedures To Assess The Capability Of The Prospective Suppliers To Produce The Products Or Supply The Services In Accordance With The Contract, Prior To The Issuance Of Any Purchase Document. 3.22.2 Each Sub-tier Supplier Of Material Or Services For Items In Section 3 Of This Contract Must Be Subjected To A Periodic Review Or Audit By The Prime To Determine The Continued Capability Of The Supplier To Control The Quality Of The Products Or Services specified In The Purchase Order Or Contract. 3.22.3 The Prime Contractor Must Ensure That The Purchased Product Conformsto Specified Purchase Requirements And This Contract. The Type And Extent Of Control Applied To The Supplier And The Purchased Product Must Be Dependent Upon The Effect Of The purchased Product On The End Item Represented By This Contract. 3.22.4 The Prime Contractor Must Evaluate The Requirements Of The Contractand Select Suppliers Based On Their Ability To Supply The Product In Accordance With The Prime Contractor's Requirements And The Contract. Criteria For Selection And Evaluation Must Be established. Records Of This Effort Must Be Available For Review By The Government. 3.22.5 The Prime Contractor's Supplier Quality Assurance Program Must Provide For A Review Of Purchase Documents To Assure Applicable Quality Requirements Are Included Or Referenced In The Documentation For Compliance By The Supplier. 3.23 Government Furnished Material And/or Equipment (gfm/gfe) - When Material Or Equipment Is Furnished By The Government, The Contractor Must Develop Documented Control Procedures That Require At Least The Following: 3.23.1 Visual Examination Upon Receipt To Detect Damage During Transit. 3.23.2 Inspection For Completeness And Proper Type. 3.23.3 Verification Of Material Quality Received. 3.23.4 Periodic Inspection And Precautions To Assure Adequate Storage Conditions And To Guard Against Damage From Handling And Deterioration During Storage. 3.23.5 Functional Testing, Either Prior To Or After Installation, Or Both, As Required By The Contract To Determine Satisfactory Operation. 3.23.6 Identification And Protection From Improper Use Or Disposition. 3.23.7 Reporting To The Government, Any Gfm Or Gfe Property Found Damaged, Malfunctioning, Or Otherwise Unsuitable For Use. In The Event Of Damage Or Malfunction During Or After Installation, The Supplier Must Determine And Record Probable Cause And necessity For Withholding The Material From Use. 3.23.8 For Gfe Material, And As Required By The Terms Of The Bailment Agreement, The Supplier Must Establish Procedures For Adequate Storage, Maintenance, And Inspection Of Bailed Government Material. Records Of All Inspection And Maintenance Performed On bailed Property Must Be Maintained. 3.23.9 Material Returned To The Contractor Must Be Handled As Gfm. 3.24 Traceability And Certification Requirements - To Assure That Correct Materials Are Installed In Level I/subsafe Systems, It Is Imperative That Traceability Be Maintained From The Material To The Material Certification Test Report And Other Required objective Quality Evidence (oqe). The Material Certification Report Must Completely And Accurately Reflect That The Material Supplied Meets The Specified Requirements. Materials Requiring Traceability And Certification Data Are Identified Within Paragraph 3, section C Of This Contract/purchase Order. 3.24.1 The Following Provides The Minimum Requirements For Maintaining Material Traceability And Supplements The Requirements Specified In Di-misc-81020 And Elsewhere In The Contract/purchase Order. The Contractor Must Develop Written Procedures That implement The Material Control Requirements Stated Herein And Elsewhere In This Contract/purchase Order. 3.25 Material Traceability - The Certification Data Report Must Be Identified Through A Unique Traceability Number, Heat-lot Number, Or Heat-treat Number, As Applicable, Which Must Also Be Marked On The Material. This Traceability Marking On The Material Must provide Direct Traceability To The Material's Chemical Composition And Mechanical Properties Certification Data. For Material Produced By Batch, Continuous Cast, Or Continuous Pour Processes, Samples Must Be Taken No Less Than Once In Every Eight Hours Of operation For The Purpose Of Validating Proper Chemical Composition And Mechanical Properties. Traceability Must Be Maintained Through All Process Operations Including Any Subcontracted Operations, To The Finished Component. 3.25.1 Material Marking For Traceability And Identification - The Following Are The Minimum Marking Requirements. Additional/alternate Marking Requirements, If Applicable, Will Be Specified Elsewhere In The Contract/purchase Order. In Addition To The marking Requirements On Applicable Drawings And/or Specifications, Marking For Traceability Is Required. All Traceability Markings Must Be Permanently Applied In Accordance With Mil-std-792 (except As Specified Below). An Alternate Marking Method Is permissible Provided It Is An Available Option In The Contractually Invoked Specification Or Drawing, Except In Instances Where The Material Has Been Modified By This Contract/purchase Order And Differs From That Specified In The Specification Or Drawing. 3.25.2 Traceability Markings For Items With Precision Machined Or Plated Surfaces, Or Material With Suitable Marking Surface Areas Less Than 3/8 Inches Square (either 3/8" X 3/8" Or An Area Equal To 0.1406 Inches Square) Must Be Applied To A Durable Tag And the Tag Securely Affixed To The Material. 3.25.3 Traceability Markings Must Be Maintained Through Assembly, And Whenever Possible Must Be Visible After Assembly. For Items Where The Marking Is Not Visible After Assembly, A Durable Tag Must Be Securely Attached To The Assembly Identifying The Part number, Piece Number, Traceability Number, And The Location Of The Permanent Mark. 3.25.4 Marking Must Be Legible And Must Be Located So As To Not Affect The Form, Fit, And Function Of The Material. ; ; 3.26 See Cdrl Di-misc-81020 (chemical And Mechanical) - Material Certification - In Addition To The Certification Data Requirements Specified In Di-misc-81020, The Following Material Certification Requirements Apply: 3.26.1 Quantitative Chemical And Mechanical Analysis Of Material Traceable To Traceability Markings Is Required. Material Certification Test Reports Must Include The Class, Form, Condition, Grade, Type, Finish, And/or Composition, As Applicable, Of The material Supplied. 3.26.2 Re-identification And Re-certification Of Material Is Required When The Material Is Subjected To A Process Which Alters It's Properties. If The Starting Material Or Raw Stock Is Processed In A Manner That Will Not Affect Its Chemical Composition Or mechanical Properties, The Original Certifications For The Chemical Composition And Mechanical Properties, As Required By The Material Specification, Are Acceptable. Re-certification Of The Chemical Or Mechanical Properties Is Required If A Process Is Used during Fabrication That Alters The Original Properties Of The Material (e.g. Alloying, Heat Treating, Or Forming). In These Instances, The Properties Of The Material Must Be Re-determined And Documented To Reflect The Altered Condition. The Altered Material must Be Uniquely Re-identified. The Properties Thus Determined And Documented, Are Required For Final Certification And Must Conform To The Material Specification Or The Contract/purchase Order Requirements. When Only The Mechanical Properties Are Altered, the Original Certification Forchemical Composition Must Be Overstamped And Annotated With The Unique Traceability Material And At A Minimum Contain The Information Below. traceability Marking ________________________________________________ (marking On Finished Item) is Fabricated From Raw Material Identified To heat/lot Number ______________ And Heat Treat Number _____________________ (when Applicable) _________________________________________ Date _____________________ (name And Signature Of Auth. Co. Rep.) 3.26.3 Material Certification Data Forwarded By The Manufacturer Must Contain A Signed Certification That The Report Results Represent The Actual Attributes Of The Material Furnished And Indicate Full Compliance With All Applicable Specification And Contract requirements. Transcription Of Certification Data Is Prohibited. 3.26.4 Statements On Material Certification Documents Must Be Positive And Unqualified. Disclaimers Such As "to The Best Of Our Knowledge" Or "we Believe The Information Contained Herein Is True" Are Not Acceptable. 3.26.5 If Material Is Received Without The Required Certification Papers Or With Incorrect/missing Data On The Certification Papers, The Material Will Be Rejected. 3.27 Material Handling - The Written Material Control Process Must Include The Following: 3.27.1 All Raw Materials Must Have Traceability Markings (except As Specified Below). 3.27.2 Stored Raw Materials Requiring Traceability Must Be Segregated To Preclude Intermingling With Materials Not Requiring Traceability. 3.27.3 When Traceability Markings Will Be Removed By A Manufacturing Or Fabrication Process, The Marking Must Be Recorded Prior To Removal And Be Immediately Restored Upon Completion Of The Process. If This Cannot Be Done Or Is Impractical, An Appropriate material Control Procedure (such As A Bag And Tag, Tagging, And/or Tote Box Control) Must Be Employed. The Material Control Procedure Must Provide A Method Of Positive Control To Preclude Commingling Of Heats/lots Or Loss Of Traceability. The Traceability marking Must Be Reapplied Upon Completion Of The Final Manufacturing Process. 3.27.4 Brazing Or Weld Filler Metals For Strength Welds Forming Or Integral With Pressure Containing Components Or Assemblies Requiring Traceability Must Be Verified To Be The Correct Material, And Type Or Grade, As Applicable, Prior To Consumption. At A minimum, Material Verification Must Consist Of Inspection Of Material Test Reports For Conformance To Specified Requirements. Control Of Welding And Brazing Filler Metals Must Be Maintained To The Point Of Consumption To Assure Use Of The Correct Type And grade. Markings And Traceability Requirements Do Not Apply To Brazing And Weld Filler Metals After Consumption. It Is The Responsibility Of The Prime Contractor To Ensure Conformance With The Above Requirements On Welds Performed By Their Subcontractors. 3.27.5 Purchase Orders For Raw Material Must Specify That The Material Be Traceable To Material Certification Test Reports By Traceability Markings On The Material And Identified On The Test Reports. The Certification Data Requirements Contained In di-misc-81020 Must Be Invoked By The Prime Contractor On All Subcontractors Supplying Level I Material. 3.27.6 The Material Control Process Must Include Requirements For The Maintenance Of Traceability For Items Sent Out For Subcontracted Operations. If Such Operations Would Remove Traceability Markings, Purchase Or Work Orders Must Specify A Method And Marking location For Remarking. The Contractor Must Also Ensure That Subcontractor Production Controls Are Adequate To Preclude Commingling Of Materials During Processing. 3.28 Receiving Inspection - 3.28.1 Products And Services Produced By Sub-tier Suppliers For Incorporation In The Contract End Item Must Be Subject To Inspection Or Audit At The Time Of Receipt By The Prime Prior To Further Processing Within The Prime Contractor's Plant Or Shipment To another Location. 3.28.2 Receiving Inspection Must Include As A Minimum - verification That The Traceability Marking On The Material Agrees With That On The Certification Test Reports. verification That Certification Test Reports Are Legible And Complete. verification That The Contents Of The Certification Test Reports Are In Compliance With The Contractually Invoked Specifications And Requirements. 3.29 Discrepancy Reporting - 3.29.1 Nonconforming Products From Sub-tier Suppliers Must Be Identified And Processed In Accordance With The Prime Contractor's Procedures For Controlling Nonconforming Products. The Prime Contractor Must Report The Receipt Of Any Nonconforming Products To the Responsible Sub-tier Supplier In Accordance With Established Procedures. Nonconforming Material Records Must Be Maintained And Available For Review By The Government Quality Assurance Representative (qar). 3.30 Final Inspection - The Following Inspections Must Be Performed Prior To Government Inspection And Acceptance. 3.30.1 Material Sampling - Material Must Be Inspected For Form, Fit, And Function. Lot Acceptance Must Be Based On Zero Defects And Lot Rejection Based On One Defect. The Sample Size Must Be In Accordance With The Sampling Plan(s) In The Applicable Military specification Or Standard, Federal Specification Or Standard, Or Drawing To Which The Material Was Manufactured. In The Absence Of Such Sampling Plans, Sampling Inspection Must Be Per Ansi/asq-z1.4, General Inspection Level Ii (for Sample Size Selection Code), table Iia (for Sample Size). small Lot Sizes - For Lot Sizes Of Fifty Or Less, The Minimum Sample Size Must Be Eight Units. For Lot Sizes Of Eight Or Less, The Sample Size Must Be One Hundred Percent Of The Lot. 3.30.2 The Manufacturer May Elect To Use Statistical Process Control (spc) To Assure Product Quality In Lieu Of The Above Attribute Sampling Plan, Provided That The Spc Methodology/system Used Provides Acceptable Products To The Government. However, The government/navy Receipt Inspection Activity May Perform Their Acceptance Inspection Of The Material Using The Attribute Sampling Plan Outlined Above. 3.30.3 All Data Concerning Material Verification (chemical, Mechanical Or Physical Properties), Traceability (material Certifications To Material Marking), And Nondestructive Test (ndt) Certifications For Material Must Be 100% Inspected. The Certification test Reports Must Also Be 100% Inspected For Completeness And Legibility. 3.30.4 All Material Requiring Traceability Must Be 100% Inspected For Traceability Marking And That The Marking Is Legible. 3.31 First Article Test/inspection (government) - ;destructive; - The Contractor Shall Deliver ;one (1) Each Penetrator Assembly, One (1) Each Header Assembly, And One (1) Each Inboard Plug Assembly; Unit(s) To ;receiving Officer, Code 526, Portsmouth Naval shipyard, Portsmouth, Nh 03804-5000; Mf Equipment Testing Laboratory, Code 270.1; For First Article Tests In Accordance With The ;requirements Of Cpg 1025, Paragraph 4.4. Underwater Explosion Testing Is Not Required; . 3.32 See Cdrl Di-misc-80678 (special Emphasis C Of C) - The Certificate Of Compliance Must Show Traceability To The Marking Applied On Each Individual Item, And Must Contain The Following Information: 1. Contractor's Name, Address And Date. 2. The Contract/purchase Order Number (for Example: N00104-11-p-fa12) 3. The National Stock Number (nsn). The 18 Character National Stock Number For Special Emphasis Material Includes The Two Digit Cog, The Four Digit Fsc, The 9 Digit Niin, And The Two Digit Smic (for Example: 1h 4820 012345678 L1) ("n/a" When Not Applicable). 4. Lubricants, Sealants, Anti-seize, And/or Thread Locking Compounds ("n/a" When Not Applicable). 5. Certification That O-rings, Packing, Gaskets, Or Other Elastomeric Products Were Installed In A Compressed State Within An Assembly Or Sub-assembly, Prior To Expiration Of The Shelf Life ("n/a" When Not Applicable). 6. Manufacturer's Compound Number ("n/a" When Not Applicable). 7. When Weld Procedure Submittal Is Required By The Contract, A Statement That The Approval Date Of The Qualification Data Precedes Any Production Or Repair Welding Performed On This Contract. ("n/a" When Not Applicable). 8. A Statement To The Effect That All Items Furnished On This Contract Are In Full Compliance With The Specifications And Requirements And List Each Contractually Invoked Conformance/compliance Test Performed By Name And That It Was Performed satisfactorily. 9. Contractor's Or Authorized Personnel's Signature. 4. Quality Assurance 4.1 Notes To Dcma Qar And The Contractor - 4.1.1 Dcma Qar And The Contractor For Proprietary Designs - Departures From Contractor Imposed Requirements, Not Specifically Covered By The Contract, Must Be Judged Individually On The Basis Of The Effect, If Any, On Contractual Requirements. When There Is A disagreement Between The Contractor And The Government Representative As To The Effect On Contractual Requirements, The Departure Must Be Considered A Nonconformance And Be Submitted To The Pco For Disposition. 4.1.2 Dcma Qar And The Contractor For Proprietary Designs - All Records Of Departures From Contractor Imposed Requirements Must Be Maintained And Available For Review At The Contractor's Facility. A Copy Must Be Given To The Local Government Representative. A record Of These Departures, Traceable To The Applicablepart Number And Contract Number Must Be Submitted To The Pco. 4.1.3 Dcma Qar And The Contractor For Proprietary Designs - For Proprietary Designs, The Contractor's Part Numbers Are Acceptable For Reference Only. The Delivered Material Must Conform To All Drawings, Specifications, And Other Contractual Requirements. 4.1.4 Dcma Qar - It Is The Responsibility Of Dcma Qar To Review Non-destructive Testing (ndt) Procedures For Navsup Contracts/purchase Orders. 4.1.5 Dcma Qar And The Contractor - The Ecds (electronic Contractor Data Submission) System Is Available For Certain Data Submissions And To Submit Questions And Clarifications, And Waiver Requests On Contracts And Solicitations. Ecds Can Be Found At: https://register.nslc.navy.mil/ 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Must Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Several Definitions Of Terms That Apply To Csi Items Are Listed Below. All Terms May Not Apply To Every Item. 6.1.1 The Ecds (electronic Contractor Data Submission) System Is At: Https://register.nslc.navy.mil/ This Application Will Require Advance Registration Using A Pki Digital Certificate On A Cac. A Vendor User Guide Is Available As Csd001 In The Csd (contract Support Document) Library Within Ecds. 6.1.2 Critical Safety Item (csi) - Any Ship Part, Assembly, Or Support Equipment Containing A Critical Characteristic Whose Failure, Malfunction, Or Absence Of Which Could Cause A Catastrophic Or Critical Failure Resulting In Loss Of, Or Serious Damage To The ship, Or Unacceptable Risk Of Personal Injury Or Loss Of Life. 6.1.3 Critical Process - As Determined By The Twh, Any Process, Operation Or Action Performed On A Ship Csi That Serves To Establish A Critical Characteristic (such As Welding, Soldering, Machining, Polishing, Cleaning, Or Assembling) Or Confirm That A critical Characteristic Is Within Drawing Or Specification Compliance (such As, Testing, Measurement, Or Non-destructive Evaluation). 6.1.4 First Article - Pre-production Models, Initial Product Samples, Test Samples Produced To Ensure A Manufacturer's Capability To Meet Full Specification Requirements. 6.1.5 First Article Test (fat) - Contractually Required Testing And Inspection Of A Supplier's Pre-production, Production, Or "production Representative" Specimens To Evaluate A Manufacturer's Ability To Produce Conforming Product Prior To The Government's commitment To Receive Subsequent Production Items. First Article Testing Is Product Specific And Does Not Assess Manufacturing Process Controls Nor Does It Assure The Effectiveness Of The Manufacturer's Quality Program. 6.1.6 Government Source Inspection (gsi) - Gsi Is Independent Oversight Performed By A Government Representative Usually A Dcma Quality Assurance Representative (qar)) To Assure That Those Unique Product Quality And System Elements, Identified By The contracting Agency As Important, Are Observed And Evaluated. 6.1.7 Quality Assurance Letter Of Instruction (qali) - A Qali Is A Formal Document Initiated By A Contracting Activity That Provides Essential Requirements And Instructions For Contracted Materials To Be Independently Verified And Accepted By A Government representative Prior To Shipment. 6.1.8 Objective Quality Evidence (oqe) - The Quantitative And Qualitative Data Of All Mechanical, Chemical, And Performance Tests Performed (as Required By The Applicable Specification, Drawing, Or Purchase Document) To Prove That The Material Supplied conforms To The Specified Requirements. 6.1.9 Surface Discontinuity - Any Surface Irregularity, Marking, Or Localized Change In Physical Character Of The Surface, Other Than Dimensional, That Exists Infrequently At One Or Several Places. (examples: Burrs, Dents, Nicks, Scratches, Gouges, Pits, center-punches, Scribes, And Tool Marks) Surface Discontinuities Less Than 0.005-inch In Depth Are Acceptable Provided They Do Not Violate Any Other Design Requirements Specified In This Contract/purchase Order. 6.1.10 Traceability Code - A Code Or Number Providing Traceability To The Actual Chemical And Mechanical Properties Of The Specified Heat, Batch, Or Form From Which The Material Originated. 6.1.11 Verification - An Examination Performed To Determine Compliance With A Specific Requirement. 6.1.12 Nonconformance - A Nonconformance Is Defined As Affecting Or Violating The Following: - The Requirements Of This Contract/purchase Order. - Contractually Invoked Drawings (i.e. Envelope Dimensions, Interface Dimensions With Mating Parts/equipment, Center Of Gravity, Weights, Piece Part Identification, Material, Etc.). - Contractually Invoked Federal, Military, Or Commercial Specifications And/or Standards. - Form, Fit, Function, Performance To Contract Requirements, Reliability, Maintainability, Interchangeability, Safety Of Personnel Or Equipment, Or Additional Cost To The Government. 6.1.13 Waiver - A Written Authorization To Accept An Item, Which During Manufacture, Or After Having Been Submitted For Government Inspection Or Acceptance, Is Found To Depart From Specified Requirements, But Nevertheless Is Considered Suitable For Use As Is or After Repair By An Approved Method. 6.1.14 Deviation - A Specific Written Authorization (granted Prior To The Manufacture Of An Item) To Depart From A Particular Requirement(s) Of An Item's Current Approved Configuration Documentation For A Specific Number Of Units Or A Specified Period Of time, And To Accept An Item Which Is Found To Depart From Specified Requirements, But Nevertheless Is Considered Suitable For Use "as Is" Or After Repair By An Approved Method. 6.1.15 Critical Waiver/deviation - This Waiver/deviation Consists Of A Departure Involving Safety. 6.1.16 Major Waiver/deviation - This Waiver/deviation Consists Of A Departure Involving: - Performance - Interchangeability, Reliability, Survivability, Maintainability, Or Durability Of The Item Or Its Repair Parts - Health Or Safety - Effective Use Or Operation - Weight, Stability, Or Structural Integrity - System Design Parameters As Schematics, Flows, Pressures Or Temperatures - Compartment Arrangements Or Assigned Function 6.1.17 Minor Waiver/deviation - This Waiver/deviation Consists Of A Departure Which Does Not Involve Any Of The Factors Listed As Critical Or Major. 6.1.18 Engineering Change (ec) - A Change To The Current Approved Configuration Documentation Of A Configuration Item At Any Point In The Life Cycle Of The Item. 6.1.19 Engineering Change Proposal (ecp) - A Proposed Engineering Change And The Documentation By Which The Change Is Described, Justified, And Submitted To The Government For Approval Or Disapproval. 6.1.20 Class I Ecp - A Class I Ecp Is Approved By The Government's Configuration Control Board And Authorized With A Contract Modification. 6.1.21 Class Ii Ecp - A Class Ii Change Is Typically Reviewed For Concurrence In Classification By The Local Government Representative, Unless Otherwise Specified Elsewhere In The Contract/purchase Order. 6.2 In Accordance With Opnavinst 5510.1 All Documents And

Details: Combined Synopsis/solicitation Notice combined Synopsis/solicitation Notice page 3 Of 3 combined Synopsis/solicitation Notice *= Required Field combined Synopsis/solicitation Notice page 1 Of 3 (i) This Is A Combined Synopsis/solicitation For Commercial Services Prepared In Accordance With The Format In Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Proposals Are Being Requested And A Written Solicitation Will Not Be Issued. (ii) Solicitation 36c24725q0296 Is Issued As A Request For Quotation (rfq). (iii) The Solicitation Incorporates Provisions And Clauses In Effect Through Federal Acquisition Circular 2025-02, Dated 01-03-2025. (iv) This Solicitation Is Set-aside Exclusively For Service-disabled Veteran-owned Small Business Concerns. To Be Considered For Award Prospective Offerors Must Be Registered And Active In The System For Award Management (www.sam.gov) And Sba Verified Sdvosb Veteran Small Business Certification Veteran Small Business Certification (vetcert) (https://veterans.certify.sba.gov/) Concern Verified At The Date And Time Set For Receipt Of Offers. An Offeror, Who Is Not Sam Registered Or Sba Vet Cert Verified Sdvosb Concern At The Date And Time Set For Receipt Of Offers Will Have Their Offer Rejected As Non-responsive And Will Not Be Considered For Award. The Applicable Naics Code For This Solicitation Is 562211, Small Business Size Standard $47.0 Million. Applicable Wage Determination Wd # 2015-4609, Revision 24, Dated 12/23/2024 Is Incorporated. (v) Contractor Shall Provide Quote For Services A Base Plus (4) Four Option Years. (vi) Price/cost Schedule item Information item Number description Of Supplies/services quantity unit unit Price amount 0001 12.00 mo __________________ __________________ contractor Shall Perform Regulated Medical Waste (rmw) Pick Up/disposal Services In Accordance With The Statement Of Work (sow). This Service Includes But Is Not Limited To Items Contaminated With Blood And Body Fluids/waste, Chemotherapy Wastes, Sharps, Pathological And Microbiological Waste Or Other Potentially Infectious Materials And The Collection, Packaging, Transport, And Incineration Or Otherwise Disposal Of Medical Waste Materials In Accordance With All Applicable Environmental Protection Agency (epa), Food And Drug Administration (fda), Department Of Transportation (dot), Occupational Safety And Health Administration (osha) And Any Other State And Federal Requirements Or Guidelines. contract Period: Base pop Begin: 04-01-2025 pop End: 03-31-2026 1001 12.00 mo __________________ __________________ contractor Shall Perform Regulated Medical Waste (rmw) Pick Up/disposal Services In Accordance With The Statement Of Work (sow). This Service Includes But Is Not Limited To Items Contaminated With Blood And Body Fluids/waste, Chemotherapy Wastes, Sharps, Pathological And Microbiological Waste Or Other Potentially Infectious Materials And The Collection, Packaging, Transport, And Incineration Or Otherwise Disposal Of Medical Waste Materials In Accordance With All Applicable Environmental Protection Agency (epa), Food And Drug Administration (fda), Department Of Transportation (dot), Occupational Safety And Health Administration (osha) And Any Other State And Federal Requirements Or Guidelines. contract Period: Option 1 pop Begin: 04-01-2026 pop End: 03-31-2027 2001 12.00 mo __________________ __________________ contractor Shall Perform Regulated Medical Waste (rmw) Pick Up/disposal Services In Accordance With The Statement Of Work (sow). This Service Includes But Is Not Limited To Items Contaminated With Blood And Body Fluids/waste, Chemotherapy Wastes, Sharps, Pathological And Microbiological Waste Or Other Potentially Infectious Materials And The Collection, Packaging, Transport, And Incineration Or Otherwise Disposal Of Medical Waste Materials In Accordance With All Applicable Environmental Protection Agency (epa), Food And Drug Administration (fda), Department Of Transportation (dot), Occupational Safety And Health Administration (osha) And Any Other State And Federal Requirements Or Guidelines. contract Period: Option 2 pop Begin: 04-01-2027 pop End: 03-31-2028 3001 12.00 mo __________________ __________________ contractor Shall Perform Regulated Medical Waste (rmw) Pick Up/disposal Services In Accordance With The Statement Of Work (sow). This Service Includes But Is Not Limited To Items Contaminated With Blood And Body Fluids/waste, Chemotherapy Wastes, Sharps, Pathological And Microbiological Waste Or Other Potentially Infectious Materials And The Collection, Packaging, Transport, And Incineration Or Otherwise Disposal Of Medical Waste Materials In Accordance With All Applicable Environmental Protection Agency (epa), Food And Drug Administration (fda), Department Of Transportation (dot), Occupational Safety And Health Administration (osha) And Any Other State And Federal Requirements Or Guidelines. contract Period: Option 3 pop Begin: 04-01-2028 pop End: 03-31-2029 4001 12.00 mo __________________ __________________ contractor Shall Perform Regulated Medical Waste (rmw) Pick Up/disposal Services In Accordance With The Statement Of Work (sow). This Service Includes But Is Not Limited To Items Contaminated With Blood And Body Fluids/waste, Chemotherapy Wastes, Sharps, Pathological And Microbiological Waste Or Other Potentially Infectious Materials And The Collection, Packaging, Transport, And Incineration Or Otherwise Disposal Of Medical Waste Materials In Accordance With All Applicable Environmental Protection Agency (epa), Food And Drug Administration (fda), Department Of Transportation (dot), Occupational Safety And Health Administration (osha) And Any Other State And Federal Requirements Or Guidelines. contract Period: Option 4 pop Begin: 04-01-2029 pop End: 03-31-2030 grand Total __________________ (vii) Description Of Requirement: statement Of Work regulated Medical Waste And Sharps Removal Services tuscaloosa Va Medical Center a. General Information: 1. Title Of Project: Regulated Medical Waste And Sharps Removal Services 2. Location Of Services: Tuscaloosa Va Medical Center, 3701 Loop Road East, Tuscaloosa, Al 35404 3. Location Of Sharps/bio-hazard Containers: building room Number quantity 137 4-117 1 137 14-117 1 137 14-106 1 137 3117 1 137 3104 1 137 d3-101 1 137 e3-107 2 137 e3-117 1 137 g3-101 1 137 g3-116 2 137 h3-113 1 137 13-100 1 137 12-117 2 135 g-15 1 135 g-17 1 135 g18 1 135 g19 1 135 g21 1 135 g23 1 135 g23 1 135 g26 1 135 g25 1 135 g27 1 135 g31 1 135 g32 1 135 g33 1 135 g34 1 135 g42 1 38 210 1 38 211 1 38 212 1 38 213 1 38 214 1 38 206 1 38 207 1 38 240 1 38 242 1 38 243 1 38 244 1 38 243 1 38 243a 1 38 227 1 38 241 1 38 241a 1 38 243 1 38 251 1 38 252 1 38 254 1 38 111 1 38 112 1 38 113 1 38 114 1 38 115 1 38 110 1 38 109 1 38 106 1 38 104 1 38 143 1 38 133 1 38 133b 1 38 141 1 38 142 1 38 142a 1 38 143 1 38 144 1 38 144a 1 38 145 1 38 152 1 38 152a 1 38 153 1 38 155 1 1 314 2 1 308 1 1 323 1 1 420 1 phar-135 g12, G58 2 phar-145 tbd 2 eye 20a 1 dental 41b, 41e, 41h, 41j, 41m, 41n, 41p, 41q 1 lab-135 123, 128, 128a, 128c, 133, 133b, 133d 25 18 108 1 146 19, 30 2 147 19 2 149 23, 33, 45, 69, 79 9 61 a37 1 61 b-20 3 61 b23 2 61 d20 1 61 d-22 3 cage-3 n/a (storage) 69 (estimated) 3. Period Of Performance: Base Plus Four (4) Option Years As Follows: base Year: April 1, 2025 March 31, 2026 option Year #1: April 1, 2026 March 31, 2027 option Year #2: April 1, 2027 March 31, 2028 option Year #3: April 1, 2028 March 31, 2029 option Year #4: April 1, 2029 March 31, 2030 4. Type Of Contract: Firm Fixed Price 5. Days And Hours Of Operation: The Tuscaloosa Vamc Business Days And Hours Are Monday Through Friday 8:00 Am- 4:30 Pm, Central Standard Time, Excluding Federal Holidays. Federal Holidays Are New Year S Day, Martin Luther King Birthday, President S Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Veteran S Day, Thanksgiving Day, And Christmas Day. B. General Requirments: 1. The Contractor Shall Provide All Labor, Supervision, Transportation, Supplies, Equipment Necessary To Pick Up And Transport Regulated Medical Waste (rmw) To Include The Pickup Of Sharps And Bio-hazard Waste. 2. The Contractor Shall Collect, Transport, And Dispose Of Rmw And Sharps. Should Be Treated By Autoclaving Or By Means As Regulated By The Alabama Department Of Environmental Management, And In Accordance With Federal, State And Local Laws And Regulations. 3. Pickup Of Full Sharps And Rmw Shall Be Twice Every Week On Wednesdays From The Locked Cage Located In Building 3. Twice Per Week The Contractor Should Pick Up From All Units As Listed In The Above Table. Contractor Is To Check In With The Cor Or Chief Ems. 4. This Medical Facility Has As Estimate 19,102 Pounds Of Rmw That Is Disposed Of Per Year And 13,000 Pounds Of Sharps And Bio-hazardous Waste Per Year. 5. Types Of Rmw Include, But Are Limited To The Following: a. Pathological Waste B. Cultures, Stocks And Vaccines C. All Used And Unused Sharps D. Blood, Blood Products, Other Potentially Infectious Body Fluids And Contaminated Items E. Pharmaceuticals (controlled, Outdated And Vaccines) **will Not Be Separated note: Please Be Advised That All Personnel Of The Awarded Contractor Must Have A Completed Tuberculosis Skin (tb) Test In Order To Work In Patient Areas. The Tb Skin Test Will Be At The Expenses Of The Contractor And Proof Of The Test Must Be Submitted To The Contracting Officer Representative (cor) Prior To Any On-site Services Conducted At The Tvamc. c. Specific Services: 1. Provide And Service Reusable Sharps Containment System: a. Contractor Shall Provide Labor, Transportation, Collection, Removal, Treatment And Destruction Services Including A Reusable Sharps Containment System Compliant With Centers For Disease Control (cdc) And National Institute For Occupational Safety And Health (niosh) Guidelines For The Storage, Transport And Shipment Of Regulated Medical Waste. b. A Minimum Of 90 Containers Are Needed Bi-weekly At The Tvamc. For Start Up Purposes, A Total Of 196 Containers Are Needed As Follows: 2 Gallon 64 4 Gallon 36 7 Gallon 96 c. Contractor Shall Provide Rigid Puncture Resistant Sharps Containers That Meet The American Society For Testing Materials (astm) Standard F2131-01 "standard Specification For Puncture Resistance Of Materials Used In Containers For Discarded Medical Needles And Other Sharps" d. Contractor Shall Provide Sharps Containers That Include Appropriate Sizes And Shapes, Opening Types (vertical Drop) And Closures (locking Mechanism), Mounting Brackets, Carts With Casters (to Hold And Transport), Training, And Replacement For Sharps Collection And Containment Of Sharps Waste (defined Below). e. Sharps Containers Shall Be Of The Type That Lends Itself To Privacy Of Patient Information (example- Be Of Solid Red In Color). Each Container Shall Meet All Requirements Of The Occupational Safety And Health Administration (osha) Regulation 29 Cfr 1910.1030 'bloodborne Pathogens" And Be Registered As A Sharp Waste Container With The Food And Drug Administration (fda). f. Contractor Shall Provide Labor, Tools, Materials, Supplies, Appropriate Equipment, Transportation, And Supervision Necessary To Pick Up, Store, Transport, Decant, And Clean/sterilize Containers As Well As Destroy, Dispose Of, Document, And Invoice For Waste Removed From The Containers. Special Function Items Such As, But Not Limited To, Funnel Tops, Traps, Wall Cabinets And Related Hardware, Shall Be Supplied By The Contractor At No Additional Cost To The Va. g. "sharps Infectious Waste" Shall Be Considered For The Purpose Of This Contract To Include Hypodermic Needles, Syringes And Scalpel Blades. The Term Does Not Include Any Hazardous Waste, Radioactive Waste, Or Pharmaceuticals. The Medical Center Will Be Responsible For The Segregating Of All Waste In Accordance With Federal, State, And Local Requirements. h. The Contractor Shall Provide A Supply Of Clean/sterilized, Dry And Free Of Odors, Reusable Sharps Containers To Be Kept On Site To Be Used In The Event That A Container Does Become Full Prior To The Contractor's Scheduled Exchange Visit And An Environmental Management Service (ems) Staff Member Will Then Replace Full Container With A New Empty One. Exact Storage Location To Be Determined By Ems. i. Contents Of Containers Shall Be Transported Off Station And Disposed Of As Rmw. The Contaminated Reusable Sharps Containers Shall Be Cleaned, Disinfected, And Sterilized For Reuse. Reusable Sharps Containers Shall Not Be Cycled Through More Than 500 Times Or As Stated And Allowed By Applicable And Current Regulations. The Cost Of Any Replacement Sharps Containers Shall Be At The Contractor's Expense. j. All Containers Shall Be Clearly Labeled With Biohazard Symbol And The Word "biohazard' Displayed On Them Along With Barcode. k. The Contractor Will Provide Red Bags/liners For The Re-useable Plastic Containers As Needed, Or Upon Request. We Will Require 8- And 15-gallon Bags, Using An Estimated 1,200 Bags Per Year For Each Size. l. In Additional To Re-useable Containers, Contractor Will Provide Red Bags For Use In Emergencies. 2. Provide Regulated Medical Waste (rmw) Collection And Disposal Services a. Contractor Shall Provide Services Including The Provision Of Containers And Labels For Regulated Medical Waste; Pickup Of All Regulated Medical Waste Streams To Include Sharps; Storage And Transport; Decanting, Examination, Appropriate Treatment, Disposal, And Documentation Of Quantities And Weights Of Waste; Cleaning Of Containers; And Provision Of Legal Manifest Which Accurately Documents The Chain Of Custody From Point Of Pickup To Final Disposition. b. The Estimated Quantity Of Waste Pickup Is Established In Section B2 Price/cost Schedule. c. Contractor Will Pick Up Medical Waste And Sharps From The Units As Listed In Section A3 And Take To Building 3, Locked Cage. The Contractor Will Pick Up And Dispose Of Rmw And Sharps From The Containers Behind Building 3 In The Locked Cage. d. Regulated Medical Waste Containers: Containers Shall Be Made Of Rigid Plastic Construction Designed To Prevent Puncture By Needles And Other Sharps, Capacity Not To Exceed 96-gallons, (minimum Of 26 Wheeled Totes Are Needed In The Catchment Area) And Shall Include Locking Safety Handles Along With Appropriate Bio-hazard Warning Symbols Approved By The State And Federal Regulatory Agencies. Contractor Shall Maintain The Re-used Containers And Equipment In A State Of Satisfactory Repair (no Broken Wheels Or Lids, Sharp Points) And Appearance (free Of Dirt/old Paper Stickers) As Determined By The Cor. Contractor Shall Have Containers Disinfected Inside And Out And Free Of Moisture Using The Centers For Disease Control (cdc) Approved Disinfectant Before Returning Them To The Medical Center Or Clinics For Use. Safety Data Sheet (sds) Information Shall Be Provided By The Contractor To The Cor Prior To Use. e. Medical Waste And Sharps Should Be Disposed Of By Autoclaving. d. Safety Requirements And Training: a. Contractor Vehicles, Carts, Materials, Or Supplies Shall Not Be Left Unattended. Vehicles Shall Be Parked Only In Designated Area As Provided By Ems Staff. b. Contractor Shall Ensure That Its Staff Who Drive On Va Property Are Professional, Comply With All Facility Policies Such As Zero Tolerance For Sexual Harassment And Violence In The Workplace, Drug-free Workplace, Safety, And Be Appropriately Dressed. c. Contractor Shall Ensure That Facility Standards Are Followed Along With The Joint Commission Standards. Contractor Is Solely Responsible For Any And All Spills Or Leaks During The Performance Of The Contract. d. The Contractor Agrees To Clean Up Such Spills And/or Leaks To The Satisfaction Of The Government In A Manner Which Satisfies The Applicable Regulations, At No Cost To The Government e. The Contractor Shall Report To The Va Safety Officer Via The Cor All Spills, Regardless Of Quantity And All Personnel Exposures. Such Reports Shall First Be Reported By Telephone Within 30 Minutes Following The Incident And Shall Have A Follow Up In Writing No Later Than Seven (7) Days After The Initial Report. When Reporting A Spill, The Following Information Shall Be Furnished (1) Quantity Spilled; (2) Exact Location Of Spill; (3) Containment Procedures Initiated; (4) Clean-up And Disposal Procedures; (5) Personal Injury Involved; (6) Assistance Required; And (7) A Narrative Summarizing All On-scene Visits Made By Local, State, And Federal Officials. f. Contractor Shall Not Dispose Of Any Chemical Containers Contaminated By Cleaning Chemicals In Any Location In The Facility Except As Specified By The Cor. g. Contractor Shall Comply With All Applicable Federal, State, County Regulations On Workers' Safety Standards And Related Training. h. All Contractor Personnel Involved In The Performance Of This Contract Shall Have Received Training Regarding The Handling Of Infectious Materials, And Emergency Procedures To Be Followed In Case Of A Spill Before Starting Work Under This Contract. i. Certification Of Such Training Shall Be Provided Within (fifteen) 15 Days Of Receiving Notice Of Award Of The Contract. Certification For Any New Contract Employees Shall Be Provided To The Contracting Officer Within Thirty (30) Days Of Receipt Of The Training. e. Contractor Submittals: a. Prior To Commencement Of Any Work, The Contractor And Employees Working On This Contract Shall Submit To The Cor And/or Contracting Officer: contractor Shall Be Properly Licensed By Federal, State And Local Authorities To Provide Pickup, Removal And Disposal Of Bio-hazardous Waste And Insured. contractor Shall Attach Copies Of Licenses, Permits, And Proof Of Insurance Indicated Above With Their Quote At Time Of Offer Due Date And Shall Maintain All Required Licensing, Permitting, And Insurance Throughout The Life Of The Contract. contractor Shall Provide Name, Address, Contact Name And Telephone Number Of All Disposal Facilities To Be Used Under This Contract, With Their Offer At Time Of Offer Due Date. contractor Shall Make Complete Distribution Of The Waste To A Reliable Licensed Facility Approved By All Federal, State, And Local Regulatory Bodies For Disposal. the Contractor Shall Identify A Person Who Shall Be Responsible For The Performance Of Work. The Name And Phone Number Shall Be Provided To The Contracting Officer At The Time Of Offer. the Contractor Shall Establish And Maintain A Complete Quality Control Program To Assure The Requirements Of The Contract Are Provided As Specified. The Contractor Shall Provide A Copy Of Their Quality Control Program To The Contracting Officer At The Time Of Offer. the Contractor Shall Develop And Submit To The Contracting Officer, A Copy Of Their Contingency Plan In The Event Of Vehicle Breakdown, Disposal Facility Breakdown, Natural Disaster, Or Employee Strike At The Time Of Offer. The Contingency Plan Will Include Notification Procedures For Informing The Contractor Officer Representative (cor)/generator Of Any Actuation Of The Contingency Plan To Prevent Possible Violation Of Interstate Laws. f. Contractor Qualifications: all Personnel Of The Awarded Contractor Must Have A Completed Tuberculosis Skin (tb) Test In Order To Work In Patient Areas. The Tb Skin Test Will Be At The Expense Of The Contractor And Proof Of The Test Must Be Submitted To The Contracting Officer Representative (cor) Prior To Any On-site Services Conducted At The Tvamc. contractor Must Provide A Copy Of The State Department Of Environmental Management, notification Of Permit By Rule Operations Solid Waste Collection Operation Permit, Transporter Permit. g. Manifest Documentation/report a. Contractor Will Make Pickups At The Designated Pick Up Points Between The Hours Of 8 Am And 2:30 P.m. (weekdays). b. The Contractor Shall Provide Tracking Of Medical Waste From The Point Of Pickup, Through Use Of An Epa, Deq For Applicable State, And Dot Approved Manifest System. c. The Contractor Shall Provide Hard Copy Documentation (manifest Sheets) To The Cor, Indicating Time And Date Of Pickup, Time And Date Of Autoclaving, And Weight Of Each Container Received At The Time Of Pick Up. d. Contractor Staff Shall Engage Only Authorized Ems Staff (cor Or Designee) To Sign Manifests Of Waste In Accordance With Dot And State Requirements. Contractor Shall Provide Final Copy Of Manifests Within Two (2) Weeks After The End Of The Month Of Service. e. Contractor Shall Provide The Weights Of Medical Waste Processed For Each Facility Site At The End Of Each Month. These Weights May Be Included On The Monthly Invoice But Must Be Provided Monthly. f. Contractor Will Provide All The Necessary Labels To Designate The Type Of Medical Waste Contained In Each Container (medical Waste) h. Quality Control/assurance (contractor): a. The Contractor Shall Establish And Maintain A Complete Quality Control/assurance Program To Assure The Requirements Of The Contract Are Provided As Specified. b. The Contractor Shall Provide A Copy Of Their Quality Control/assurance Plan To The Contracting Officer With Their Quote At Time Of Offer Due Date. i. Quality/performance Requirements Summary a. As Stated Above, The Contractor Shall Be Responsible For Their Own Internal Quality Control Program. The Government Will Perform Surveillance Of The Contractor's Performance Using The Performance Work Statement And The Performance Requirements Summary (see Technical Exhibit 1) On The Next Page To Determine If The Contractor Exceeds, Meets, Or Does Not Meet These Standards. The Fact That The Government Is Performing Surveillance Of The Contractor's Performance Does Not In Any Way Relieve The Contractor From Performing Their Own Surveillance And Maintaining Acceptable Quality Levels. b. Performance Requirements Summary Matrix: 1. The Government Shall Use These Standards To Determine Contractor Performance And Shall Compare Contractor Performance To The Acceptable Quality Level (aql). technical Exhibit 1 performance / Requirement Indicator performance Standard performance Measure (aql) monitoring Method / Method For Surveillance incentive waste Collection/pickup Form Both Rmw And Sharps Containers (sections 3a And 3b) within Time Specified 100% (no Deviation) direct Observation, Random Sampling By Cor And Customer Complaints positive Past Performance & Exercise Of Option Year Periods treat And Disposal Of Waste (section 3) dispose Of In Accordance With Osha, Epa, And Local, Stated, And Federal Regulations 100% (no Deviation) direct Observation, Random Sampling By Cor positive Past Performance & Exercise Of Option Year Periods provide Copies/access To Documentation (manifest Sheets) To The Cor, Indicating Time And Date Of Pickup, Time And Date Of Autoclaving, And Weight Of Each Container Received At The Time Of Pick-up (section 6) provide At The Time Of Pickup 100% (no Deviation) direct Observation, Random Sampling By Cor positive Past Performance & Exercise Of Option Year Periods pick-up, Disposal Documents The Contractor Shall Provide Copy Of Monthly Record Of The Weights For Medical Waste (manifests) Picked Up And Disposed Of. (section 6) final Documents Received Within 2 Weeks, Following The End Of The Month 100% (no Deviation) direct Observation, Random Sampling By Cor positive Past Performance & Exercise Of Option Year Periods (viii) Far 52.212-1, Instructions To Offerors Commercial Items (sep 2023), Applies To This Solicitation. The Following Provisions And Clauses Are Added As Addenda: 52.252-1 Solicitation Provisions Incorporated By Reference (feb 1998) http://www.acquisition.gov/far/index.html http://www.va.gov/oal/library/vaar/index.asp far Number title date 52.204-7 system For Award Management oct 2018 52.204-16 commercial And Government Entity Code Reporting aug 2020 52.229-11 tax On Certain Foreign Procurements--- Notice And Representation jun 2020 852.233-70 protest Content/alternative Dispute Resolution oct 2018 852.239-75 information And Communication Technology Accessibility Notice feb 2023 addendum To Far 52.212-1 Instructions To Offerors Commercial Products And Commercial Services provisions That Are Incorporated By Reference (by Citation Number, Title, And Date), Have The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. The Following Provisions Are Incorporated Into 52.212-1 As An Addendum To This Solicitation: the Offeror Shall Submit Their Quote On Company Letterhead. The Offeror S Quote Shall Include The Name, Address, And Telephone Number Of The Offeror, The Offeror S Uei# And Orca Document, In Sam At (https://sam.gov) , And A Completed Copy Of 52.212-3 Offeror Representations And Certifications- Commercial Items. All Fillable Documents Are Required For Submission. Submission Of Vaar 852.219-75 Certification Completely Filled Out Is Required. acknowledgement Or Signed Copy Of All Amendments Posted To The Solicitation And Signed 1449. all Offerors Must Meet The Small Business Size Standard Of $47m For Naics Code 562211 Hazardous Waste Treatment And Disposal At The Time Of Submission Of Quote And At The Time Of Award. All Offerors Must Be Registered In Veterans Small Business Certification () And Sam At The Time Of Quote Submittal. an Offeror Must Be Sdvosb Verified (reference Vaar 852.219-73) At Time Of Quote Submission And At Time Of Award. Vaar 852.219-75 Certification Are A Submission Requirement And Shall Be Submitted Electronically. an Offeror Shall Indicate In Its Quote Whether It Will (1) Self-perform 100% Of The Requirement, Or (2) Subcontract Any Portion Of The Requirement. If The Offeror Intends To Subcontract Any Portion Of The Requirement, The Offeror Shall Provide A Subcontracting Plan That Includes A Percentage Breakdown Evidencing How The Offeror Will Comply With The Limitations On Subcontracting In 13 Cfr 125.6(a)(1). Failure To Provide The Required Information May Result In An Offeror S Quote Being Rejected Without Further Consideration. If The Offeror Plans On Using Subcontractors, You Must Provide A Subcontracting Plan To Include: a. Business Name b. Business Size c. Work They Will Be Performing, To Include % Of Work On Contract d. % Of Payment To Be Receive Of Total Contract Amount 7. Price: The Offeror Shall Fill-in All Unit Prices And Totals For Each Clin As Well As The Total Amount Of The Price Quote In The Solicitation S Price Schedule. 8. Technical: The Offeror Shall Demonstrate In Its Quote In As Much Detail As Possible How It Will Meet The Tusacaloosa Va Medical Center, Tuscaloosa, Al- Regulated Medical Waste And Sharps Removal Services Requirement As Described In The Solicitation S Statement Of Work. 9. Past Performance: The Offeror Is Required To Provide A Minimum Of Two (2) Past Performance Reference For Similar Services Within The Last Four (4) Years, Either Governmental Or Commercial Entity, In Response To This Solicitation, To Include Place, Size, And Years Of Service Performed. If No Past Performance Is Available, You Must Address This In Your Offer. Past Performance Will Be Reviewed As Part Of The Responsibility Determination Only. 10. All Questions Should Be Emailed To Laterrica.sewell@va.gov By Thursday, January 30, 2025, At 10:00am Est.. No Late Submissions Will Be Accepted. All Responses To Questions Shall Be Incorporated Into A Written Amendment Posted To The Government Point Of Entry (gpe). The Offeror Is Encouraged To Monitor The Gpe, Sam Website With Respect To This Solicitation Because Any Amendments To This Solicitation Will Be Posted On The Website (https://.sam.gov). there Will Be No Automated Email Notification Of Amendments. 11. Quotes Must Be Received By Thursday, February 13, 2025, At 10:00am Est. Email Your Quote To Laterrica.sewell@va.gov. The Subject Line Must Have The Solicitation The Offeror Is Responding To Listed. There Will Be No Automated Email Notification Of Receipt Of Quotes. All Quotes Received Without Requested Documentation Will Not Be Considered. a. The Offeror Will Submit All Documents In Pdf Form, Preferably One Document, With No More Than Ten (10) Pages. Not Providing All The Required Documents Above Along With Not Following The Instructions For Submission Will Result In An Unacceptable Quote. (end Of Provision) ix. Far 52.212-2, Evaluation Commercial Items (nov 2021), Applies To This Solicitation. basis For Award: This Request For Quote (rfq) Is Issued In Accordance With Far 12 And In Conjunction With Simplified Acquisition Procedures Far 13.5. Evaluation Of Price And Other Factors Will Be Performed In Accordance With Procedures Outlined In Far 13.106-3. A Single Award Will Be Made To The Offeror Who Represents The Best Value Utilizing Comparative Analysis, Considering, Technical, Past Performance, And Price. the Government Will Award A Contract Resulting From This Solicitation To The Responsible Offeror Whose Offer Conforming To The Solicitation Will Be Most Advantageous To The Government, Price And Other Factors Considered. The Following Factors Shall Be Used To Evaluate Offers: technical: The Technical Evaluator Will Evaluate The Offerors Quote To Fulfill This Requirement. The Offeror Will Show Its Understanding Of The Requirement And The Viability Of Its Quote By Demonstrating Its Plan Of Action To Provide This Service, Demonstration Of Knowledge Of The Service And Ability To Perform By Providing A Detailed Plan Of Equipment And Personnel Required To Fulfill The Need And The Procedures You Will Use While Executing The Requirement. this Description Shall Include: offer Must Be In Business For Two Or More Years. offeror Must Provide Capabilities Statement Specifying The Ability To Provide Service Directly Related To Regulated Medical Waste And Sharps Removal Services Outlined In The Statement Of Work (sow). details Of The Vendor S Internal Quality Assurance Plan. past Performance: The Offeror Is Required To Provide A Minimum Of Two (2) Past Performance References For Similar Services Within The Last Two (2) Years, Either Governmental Or Commercial Entity, In Response To This Solicitation, To Include Place, Size, And Years Of Service Performed. If No Past Performance Is Available, You Must Address This In Your Offer. Past Performance Will Be Reviewed As Part Of The Responsibility Determination Only. price. The Vendor Is Required To Quote A Fully Burdened Fixed Price For The Clin Structure As Shown In Section Vi. Insert The Quoted Unit And Extended Prices In Contract Line-item Number (clin) 0001 Through 4001. All Unit Prices Shall Be Represented In Two Decimal Positions Only. Example: $0.27, Not $0.27458. The Government Shall Evaluate Price To Determine If It Is Considered Fair And Reasonable In Accordance With Far Part 13.106-3. (b) Options. The Government Will Consider Offers For Award Purposes By Adding The Total Price For All Options To The Total Price For The Basic Requirement. The Government May Determine That An Offer Is Unacceptable If The Option Prices Are Significantly Unbalanced. Evaluation Of Options Shall Not Obligate The Government To Exercise The Option(s). This Includes Options Under Far 52.217-8, Option To Extend Services, Which Applies To This Solicitation. Evaluation Of Options Under Far 52.217-8 Will Be Accomplished By Adding Six Months Of The Quoter's Price For The Last Potential Period Of Performance Under This Contract To The Quoter's Total Price. For Example, If The Contract Includes Option Periods That Are Exercisable Under Far 52.217-9, The Quoter's Total Price For The Purpose Of Evaluation Will Include The Base Period, All Option Periods, And An Additional Six Months Of The Last Option Period. Quoters Must Price Only The Base And Option Periods Specified In The Contract Line-item Numbers (clins) And Shall Not Submit A Price For The Potential Six-month Extension Of Services Under Far 52.217-8. The Government Reserves The Right To Exercise The Option Under Far 52.217-8 Before The End Of Any Of The Contractor's Performance Periods And Will Be Exercised At The Price And/or Rates In Effect At The Time The Clause Is Exercised. Evaluation Of Options Shall Not Obligate The Government To Exercise The Option(s). a Written Notice Of Award Or Acceptance Of An Offer, Mailed Or Otherwise Furnished To The Successful Offeror Within The Time For Acceptance Specified In The Offer, Shall Result In A Binding Contract Without Further Action By Either Party. Before The Offer's Specified Expiration Time, The Government May Accept An Offer (or Part Of An Offer), Whether Or Not There Are Negotiations After Its Receipt, Unless A Written Notice Of Withdrawal Is Received Before Award. (end Of Provision) 52.204-24 Representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment (nov 2021) The Offeror Shall Not Complete The Representation At Paragraph (d)(1) Of This Provision If The Offeror Has Represented That It Does Not Provide Covered Telecommunications Equipment Or Services As A Part Of Its Offered Products Or Services To The Government In The Performance Of Any Contract, Subcontract, Or Other Contractual Instrument In Paragraph (c)(1) In The Provision At 52.204 26, Covered Telecommunications Equipment Or Services Representation, Or In Paragraph (v)(2)(i) Of The Provision At 52.212 3, Offeror Representations And Certifications Commercial Products And Commercial Services. The Offeror Shall Not Complete The Representation In Paragraph (d)(2) Of This Provision If The Offeror Has Represented That It Does Not Use Covered Telecommunications Equipment Or Services, Or Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services In Paragraph (c)(2) Of The Provision At 52.204 26, Or In Paragraph (v)(2)(ii) Of The Provision At 52.212 3. (a) Definitions. As Used In This Provision Backhaul, Covered Telecommunications Equipment Or Services, Critical Technology, Interconnection Arrangements, Reasonable Inquiry, Roaming, And Substantial Or Essential Component Have The Meanings Provided In The Clause 52.204 25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment. (b) Prohibition. (1) Section 889(a)(1)(a) Of The John S. Mccain National Defense Authorization Act For Fiscal Year 2019 (pub. L. 115 232) Prohibits The Head Of An Executive Agency On Or After August 13, 2019, From Procuring Or Obtaining, Or Extending Or Renewing A Contract To Procure Or Obtain, Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services As A Substantial Or Essential Component Of Any System, Or As Critical Technology As Part Of Any System. Nothing In The Prohibition Shall Be Construed To (i) Prohibit The Head Of An Executive Agency From Procuring With An Entity To Provide A Service That Connects To The Facilities Of A Third-party, Such As Backhaul, Roaming, Or Interconnection Arrangements; Or (ii) Cover Telecommunications Equipment That Cannot Route Or Redirect User Data Traffic Or Cannot Permit Visibility Into Any User Data Or Packets That Such Equipment Transmits Or Otherwise Handles. (2) Section 889(a)(1)(b) Of The John S. Mccain National Defense Authorization Act For Fiscal Year 2019 (pub. L. 115 232) Prohibits The Head Of An Executive Agency On Or After August 13, 2020, From Entering Into A Contract Or Extending Or Renewing A Contract With An Entity That Uses Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services As A Substantial Or Essential Component Of Any System, Or As Critical Technology As Part Of Any System. This Prohibition Applies To The Use Of Covered Telecommunications Equipment Or Services, Regardless Of Whether That Use Is In Performance Of Work Under A Federal Contract. Nothing In The Prohibition Shall Be Construed To (i) Prohibit The Head Of An Executive Agency From Procuring With An Entity To Provide A Service That Connects To The Facilities Of A Third-party, Such As Backhaul, Roaming, Or Interconnection Arrangements; Or (ii) Cover Telecommunications Equipment That Cannot Route Or Redirect User Data Traffic Or Cannot Permit Visibility Into Any User Data Or Packets That Such Equipment Transmits Or Otherwise Handles. (c) Procedures. The Offeror Shall Review The List Of Excluded Parties In The System For Award Management (sam) (https://www.sam.gov) For Entities Excluded From Receiving Federal Awards For Covered Telecommunications Equipment Or Services. (d) Representations. The Offeror Represents That (1) It [ ] Will, [ ] Will Not Provide Covered Telecommunications Equipment Or Services To The Government In The Performance Of Any Contract, Subcontract Or Other Contractual Instrument Resulting From This Solicitation. The Offeror Shall Provide The Additional Disclosure Information Required At Paragraph (e)(1) Of This Section If The Offeror Responds Will In Paragraph (d)(1) Of This Section; And (2) After Conducting A Reasonable Inquiry, For Purposes Of This Representation, The Offeror Represents That It [ ] Does, [ ] Does Not Use Covered Telecommunications Equipment Or Services, Or Use Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services. The Offeror Shall Provide The Additional Disclosure Information Required At Paragraph (e)(2) Of This Section If The Offeror Responds Does In Paragraph (d)(2) Of This Section. (e) Disclosures. (1) Disclosure For The Representation In Paragraph (d)(1) Of This Provision. If The Offeror Has Responded Will In The Representation In Paragraph (d)(1) Of This Provision, The Offeror Shall Provide The Following Information As Part Of The Offer: (i) For Covered Equipment (a) The Entity That Produced The Covered Telecommunications Equipment (include Entity Name, Unique Entity Identifier, Cage Code, And Whether The Entity Was The Original Equipment Manufacturer (oem) Or A Distributor, If Known); (b) A Description Of All Covered Telecommunications Equipment Offered (include Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); And (c) Explanation Of The Proposed Use Of Covered Telecommunications Equipment And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(1) Of This Provision. (ii) For Covered Services (a) If The Service Is Related To Item Maintenance: A Description Of All Covered Telecommunications Services Offered (include On The Item Being Maintained: Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); Or (b) If Not Associated With Maintenance, The Product Service Code (psc) Of The Service Being Provided; And Explanation Of The Proposed Use Of Covered Telecommunications Services And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(1) Of This Provision. (2) Disclosure For The Representation In Paragraph (d)(2) Of This Provision. If The Offeror Has Responded Does In The Representation In Paragraph (d)(2) Of This Provision, The Offeror Shall Provide The Following Information As Part Of The Offer: (i) For Covered Equipment (a) The Entity That Produced The Covered Telecommunications Equipment (include Entity Name, Unique Entity Identifier, Cage Code, And Whether The Entity Was The Oem Or A Distributor, If Known); (b) A Description Of All Covered Telecommunications Equipment Offered (include Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); And (c) Explanation Of The Proposed Use Of Covered Telecommunications Equipment And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(2) Of This Provision. (ii) For Covered Services (a) If The Service Is Related To Item Maintenance: A Description Of All Covered Telecommunications Services Offered (include On The Item Being Maintained: Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); Or (b) If Not Associated With Maintenance, The Psc Of The Service Being Provided; And Explanation Of The Proposed Use Of Covered Telecommunications Services And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(2) Of This Provision. (end Of Provision) 52.204-29 Federal Acquisition Supply Chain Security Act Orders Representation And Disclosures (dec 2023) (a) Definitions. As Used In This Provision, Covered Article, Fascsa Order, Intelligence Community, National Security System, Reasonable Inquiry, Sensitive Compartmented Information, Sensitive Compartmented Information System, And Source Have The Meaning Provided In The Clause 52.204 30, Federal Acquisition Supply Chain Security Act Orders Prohibition. (b) Prohibition. Contractors Are Prohibited From Providing Or Using As Part Of The Performance Of The Contract Any Covered Article, Or Any Products Or Services Produced Or Provided By A Source, If The Prohibition Is Set Out In An Applicable Federal Acquisition Supply Chain Security Act (fascsa) Order, As Described In Paragraph (b)(1) Of Far 52.204 30, Federal Acquisition Supply Chain Security Act Orders Prohibition. (c) Procedures. (1) The Offeror Shall Search For The Phrase Fascsa Order In The System For Award Management (sam)(https://www.sam.gov) For Any Covered Article, Or Any Products Or Services Produced Or Provided By A Source, If There Is An Applicable Fascsa Order Described In Paragraph (b)(1) Of Far 52.204 30, Federal Acquisition Supply Chain Security Act Orders Prohibition. (2) The Offeror Shall Review The Solicitation For Any Fascsa Orders That Are Not In Sam, But Are Effective And Do Apply To The Solicitation And Resultant Contract (see Far 4.2303(c)(2)). (3) Fascsa Orders Issued After The Date Of Solicitation Do Not Apply Unless Added By An Amendment To The Solicitation. (d) Representation. By Submission Of This Offer, The Offeror Represents That It Has Conducted A Reasonable Inquiry, And That The Offeror Does Not Propose To Provide Or Use In Response To This Solicitation Any Covered Article, Or Any Products Or Services Produced Or Provided By A Source, If The Covered Article Or The Source Is Prohibited By An Applicable Fascsa Order In Effect On The Date The Solicitation Was Issued, Except As Waived By The Solicitation, Or As Disclosed In Paragraph (e). (e) Disclosures. The Purpose For This Disclosure Is So The Government May Decide Whether To Issue A Waiver. For Any Covered Article, Or Any Products Or Services Produced Or Provided By A Source, If The Covered Article Or The Source Is Subject To An Applicable Fascsa Order, And The Offeror Is Unable To Represent Compliance, Then The Offeror Shall Provide The Following Information As Part Of The Offer: (1) Name Of The Product Or Service Provided To The Government; (2) Name Of The Covered Article Or Source Subject To A Fascsa Order; (3) If Applicable, Name Of The Vendor, Including The Commercial And Government Entity Code And Unique Entity Identifier (if Known), That Supplied The Covered Article Or The Product Or Service To The Offeror; (4) Brand; (5) Model Number (original Equipment Manufacturer Number, Manufacturer Part Number, Or Wholesaler Number); (6) Item Description; (7) Reason Why The Applicable Covered Article Or The Product Or Service Is Being Provided Or Used; (f) Executive Agency Review Of Disclosures. The Contracting Officer Will Review Disclosures Provided In Paragraph (e) To Determine If Any Waiver May Be Sought. A Contracting Officer May Choose Not To Pursue A Waiver For Covered Articles Or Sources Otherwise Subject To A Fascsa Order And May Instead Make An Award To An Offeror That Does Not Require A Waiver. (end Of Provision) 52.233-2 Service Of Protest (sep 2006) Protests, As Defined In Section 33.101 Of The Federal Acquisition Regulation, That Are Filed Directly With An Agency, And Copies Of Any Protests That Are Filed With The Government Accountability Office (gao), Shall Be Served On The Contracting Officer (addressed As Follows) By Obtaining Written And Dated Acknowledgment Of Receipt From: vaar 852.233-71 Alternate Protest Procedure (oct 2018) (a) As An Alternative To Filing A Protest With The Contracting Officer, An Interested Party May File A Protest By Mail Or Electronically With: Executive Director, Office Of Acquisition And Logistics, Risk Management And Compliance Service (003a2c), Department Of Veterans Affairs, 810 Vermont Avenue Nw, Washington, Dc 20420 Or Email: Edprotests@va.gov. (b) The Protest Will Not Be Considered If The Interested Party Has A Protest On The Same Or Similar Issue(s) Pending With The Contracting Officer. (end Of Provision) (x) Far 52.212-3 Offeror Representations And Certifications Commercial Items (nov 2023) Applies To This Solicitation. Offerors Shall Submit A Completed Copy Of Far 52.212-3 With Its Offer. (xi) Far 52.212-4, Contract Terms And Conditions Commercial Items (nov 2023) Applies To This Solicitation. The Following Provisions And Clauses Are Added As Addenda: far 52.252-2, Clauses Incorporated By Reference (feb 1998) this Contract Incorporates One Or More Clauses By Reference, With The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. Also, The Full Text Of A Clause May Be Accessed Electronically At This/these Address(es): http://www.acquisition.gov/far/index.html (far) http://www.va.gov/oal/library/vaar/index.asp (vaar) (end Of Clause) far Number title date 52.203-17 contractor Employee Whistleblower Rights nov 2023 52.204-4 printed Or Copied Double-sided On Postconsumer Fiber Content Paper may 2011 52.204-13 system For Award Management Maintenance jun 2020 52.204-18 commercial And Government Entity Code Maintenance aug 2020 52.228-5 insurance Work On A Government Installation jan 1997 852.201-70 contracting Officer's Representative dec 2022 852.203-70 commercial Advertising may 2018 52.217-8 Option To Extend Services (nov 1999) The Government May Require Continued Performance Of Any Services Within The Limits And At The Rates Specified In The Contract. These Rates May Be Adjusted Only As A Result Of Revisions To Prevailing Labor Rates Provided By The Secretary Of Labor. The Option Provision May Be Exercised More Than Once, But The Total Extension Of Performance Hereunder Shall Not Exceed (6) Six Months. The Contracting Officer May Exercise The Option By Written Notice To The Contractor Within (30) Thirty Days Of Contract Expiration. (end Of Clause) 52.217-9 Option To Extend The Term Of The Contract (mar 2000) (a) The Government May Extend The Term Of This Contract By Written Notice To The Contractor Within (30) Thirty Days Of Contract Expiration; Provided That The Government Gives The Contractor A Preliminary Written Notice Of Its Intent To Extend At Least (60) Sixty Days Before The Contract Expires. The Preliminary Notice Does Not Commit The Government To An Extension. (b) If The Government Exercises This Option, The Extended Contract Shall Be Considered To Include This Option Clause. (c) The Total Duration Of This Contract, Including The Exercise Of Any Options Under This Clause, Shall Not Exceed (5) Five Years. (end Of Clause) â supplemental Insurance Requirements â  In Accordance With Far 28.307-2 And Far 52.228-5, The Following Minimum Coverage Shall Apply To This Contract: â  (a)â  Workers' Compensation Andâ employersâ liability:â  Contractors Are Required To Comply With Applicable Federal And State Workers' Compensation And Occupational Disease Statutes.â  If Occupational Diseases Are Not Compensable Under Those Statutes, They Shall Be Covered Under The Employer's Liability Section Of The Insurance Policy, Except When Contract Operations Are So Commingled With A Contractor's Commercial Operations That It Would Not Be Practical To Require This Coverage.â  Employer's Liability Coverage Of At Least $100,000 Is Required, Except In States With Exclusive Or Monopolistic Funds That Do Not Permit Workers' Compensation To Be Written By Private Carriers. â  (b)â  General Liability:â $500,000.00â per Occurrences. â  (c)â  Automobile Liability:â $200,000.00â per Person;â $500,000.00â per Occurrence Andâ $20,000.00 Property Damage. â  (d)â  The Successful Bidder Must Present To The Contracting Officer, Prior To Award, Evidence Of General Liability Insurance Without Any Exclusionary Clauses For Asbestos That Would Void The General Liability Coverage. (end Of Clause) vaarâ 852.219-73â â va Notice Of Total Set-aside For Certified Service-disabled Veteran-owned Small Businessesâ (jan 2023)â (deviation) â  (a)â definition. For The Department Of Veterans Affairs, Service-disabled Veteran-owned Small Business Concern Or Sdvosb : â â â  (1) Means A Small Business Concern â â â â â  (i) Not Less Than 51 Percent Of Which Is Owned By One Or More Service-disabled Veterans Or, In The Case Of Any Publicly Owned Business, Not Less Than 51 Percent Of The Stock Of Which Is Owned By One Or More Service-disabled Veterans Or Eligible Surviving Spouses (see Vaar 802.201, Surviving Spouse Definition); â â â â â  (ii) The Management And Daily Business Operations Of Which Are Controlled By One Or More Service-disabled Veterans (or Eligible Surviving Spouses) Or, In The Case Of A Service-disabled Veteran With Permanent And Severe Disability, The Spouse Or Permanent Caregiver Of Suchâ veteran; â â â â â  (iii) The Business Meets Federal Small Business Size Standards For The Applicable North American Industry Classification System (naics) Code Identified In The Solicitationâ document; â â â â â  (iv) The Business Has Beenâ certifiedâ for Ownership And Control Pursuant To 38â u.s.c. 8127, 13 Cfr 128, Andâ is Listedâ as Certifiedâ inâ the Sba Certification Database Atâ https://veterans.certify.sba.gov/; And â â â â â  (v) The Businessâ agrees Toâ comply With Vaar Subpart 819.70 And Small Business Administration (sba) Regulations Regarding Small Business Size,â governmentâ contracting,â and The Veteran Small Business Certification Programâ at 13 Cfr Parts 121,â 125,â and 128. â â â  (2) The Term Service-disabled Veteran Means A Veteran, As Defined In 38 U.s.c. 101(2), With A Disability That Is Service-connected, As Defined In 38 U.s.c. 101(16). â â â  (3) The Term Small Business Concern Has The Meaning Given That Term Under Section 3 Of The Small Business Act (15 U.s.c. 632). â â â  (4) The Term Small Business Concern Owned And Controlled By Veterans With Service-connected Disabilities Has The Meaning Given The Term Small Business Concern Owned And Controlled By Service-disabled Veterans Under Section 3(q)(2) Of The Small Business Act (15 U.s.c. 632(q)(2)). â â â  (5) The Termâ  Sdvosb Participant  orâ certified Sdvosbâ means A Small Business That Has Been Certified In The Sba Veteran Small Business Certification Program And Listed In The Sba Certification Database (see 13 Cfr 128.102). â  (b)â general.â in Order Forâ a Concern To Submit An Offer And Be Eligible For The Award Of An Sdvosb Set-aside Or Sole Source Contract, The Concern Must Qualify As A Small Business Concern Under The Size Standard Corresponding To The Naics Code Assigned To The Contract And Be Listed As An Sdvosb Participant In The Sba Certification Database As Set Forth In 13 Cfr 128. â â â  (1) Offers Received From Entities That Are Notâ certifiedâ sdvosbsâ and Listed In The Sba Certification Databaseâ at The Time Of Offer Shall Not Be Considered. â â â  (2) Any Award Resulting From This Solicitation Shall Be Made To Aâ certifiedâ sdvosbâ listed In The Sba Certification Databaseâ who Is Eligible At The Time Of Submission Of Offer(s) And At The Time Of Award. â â â  (3) The Requirements In This Clause Apply To Any Contract,â orderâ or Subcontract Where The Firm Receives A Benefit Or Preference From Its Designation As An Sdvosb, Including Set-asides, Sole Source Awards, And Evaluation Preferences. â  (c)â representation. Pursuant To 38 U.s.c. 8127(e), Onlyâ certifiedâ sdvosbsâ listed In The Sba Certification Databaseâ are Considered Eligible To Receive Award Of A Resulting Contract. By Submitting An Offer, The Prospective Contractor Represents That It Is An Eligibleâ and Certifiedâ sdvosb As Defined In This Clause,â 13 Cfr 121, 125, And 128, And Vaar Subpart 819.70. â  (d)â agreement/los Certification.â when Awarded A Contract Action, Including Orders Under Multipleaward Contracts, An Sdvosb Agrees That In The Performance Of The Contract, The Sdvosb Shall Comply With Requirements In Vaar Subpart 819.70 And Sba Regulations On Small Business Size,â and Government Contracting Programs At 13 Cfr Part 121 And Part 125, Including The Non-manufacturer Rule And Limitations On Subcontractingâ (los)â requirements In 13 Cfr 121.406(b) And 13 Cfr 125.6.â for The Purpose Ofâ limitations On Subcontracting, Onlyâ certifiedâ sdvosbsâ listed In The Sba Certification Databaseâ (including Independent Contractors) Shall Be Considered Eligible And/or Similarly Situated (i.e., A Firm That Has The Same Small Business Program Status As The Prime Contractor). An Otherwise Eligible Firm Further Agrees To Comply With The Requiredâ losâ certification Requirements In This Solicitation (see 852.219 75 Or 852.219 76 As Applicable). These Requirements Are Summarized As Follows: â â â  (1)â services. In The Case Of A Contract For Services (except Construction), The Sdvosb Prime Contractor Will Not Pay More Than 50% Of The Amount Paid By The Government To The Prime For Contract Performance To Firms That Are Notâ certifiedâ sdvosbsâ listed In The Sba Certification Databaseâ (excluding Direct Costs To The Extent They Are Not The Principal Purpose Of The Acquisition And The Sdvosb/ Vosb Does Not Provide The Service, Such As Airline Travel, Cloud Computing Services, Or Mass Media Purchases). When A Contract Includes Both Services And Supplies, The 50 Percent Limitation Shall Apply Only To The Service Portion Of The Contract. â â â  (2)â supplies/products. â â â â â  (i) In The Case Of A Contract For Supplies Or Products (other Than From A Non-manufacturer Of Such Supplies), The Sdvosb Prime Contractor Will Not Pay More Than 50% Of The Amount Paid By The Government To The Prime For Contract Performance, Excluding The Cost Of Materials, To Firms That Are Notâ certifiedâ sdvosbsâ listed In The Sba Certification Database. When A Contract Includes Both Supply And Services, The 50 Percent Limitation Shall Apply Only To The Supply Portion Of The Contract. â â â â â  (ii) In The Case Of A Contract For Supplies From A Non-manufacturer, The Sdvosb Prime Contractor Will Supply The Product Of A Domestic Small Business Manufacturer Or Processor, Unless A Waiver As Described In 13 Cfr 121.406(b)(5) Has Been Granted. Refer To 13â cfrâ 125.6(a)(2)(ii) For Guidance Pertaining To Multiple Item Procurements. â â â  (3)â general Construction. In The Case Of A Contract For General Construction, The Sdvosb Prime Contractor Will Not Pay More Than 85% Of The Amount Paid By The Government To The Prime For Contract Performance, Excluding The Cost Of Materials, To Firms That Are Notâ certifiedâ sdvosbsâ listed In The Sba Certification Database. â â â  (4)â special Trade Construction Contractors. In The Case Of A Contract For Special Trade Contractors, No More Than 75% Of The Amount Paid By The Government To The Prime For Contract Performance, Excluding The Cost Of Materials, May Be Paid To Firms That Are Notâ certifiedâ sdvosbsâ listed In The Sba Certification Database. â â â  (5)â subcontracting. An Sdvosbâ subcontractorâ must Meet The Naics Size Standard Assigned By The Prime Contractor And Beâ certified Andâ listed Inâ the Sba Certification Databaseâ to Count As Similarly Situated. Any Work That A First Tier Sdvosb Subcontractor Further Subcontracts Will Count Towards The Percent Of Subcontract Amount That Cannot Be Exceeded. For Supply Or Construction Contracts, The Cost Of Materials Is Excluded And Not Considered To Be Subcontracted. When A Contract Includes Both Services And Supplies, The 50 Percent Limitation Shall Apply Only To The Portion Of The Contract With The Preponderance Of The Expenditure Upon Which The Assigned Naics Is Based. For Information And More Specific Requirements, Refer To 13 Cfr 125.6. â â (e)â required Limitations On Subcontracting Compliance Measurement Period. An Sdvosb Shall Comply With The Limitations On Subcontracting As Follows: [â ]â by The End Of The Base Term Of The Contract Or Order, And Then By The End Of Each Subsequent Option Period; Or [â ]â by The End Of The Performance Period For Each Order Issued Under The Contract. â  (f)â joint Ventures. A Joint Venture May Be Considered Eligible As An Sdvosb If The Joint Venture Complies With The Requirements In 13 Cfrâ 128.402 And The Managing Joint Venture Partner Makes The Representations Under Paragraph (c) Of This Clause.â a Joint Venture Agrees That, In The Performance Of The Contract, The Applicable Percentage Specified In Paragraph (d) Of This Clause Will Be Performed By The Aggregate Of The Joint Venture Participants. â  (g)â precedence. The Va Veterans First Contracting Program, As Defined In Vaar 802.101, Subpart 819.70, And This Clause, Takes Precedence Over Any Inconsistencies Between The Requirements Of The Sbaâ veteran Small Business Certificationâ program And The Va Veterans First Contracting Program. â  (h)â misrepresentation. Pursuant To 38 U.s.c. 8127(g), Any Business Concern, Including All Its Principals, That Is Determined By Va To Have Willfully And Intentionally Misrepresented A Company S Sdvosb Status Is Subject To Debarment From Contracting With The Department For A Period Of Not Less Than Five Years (see Vaar 809.406 2 Causes For Debarment). vaar 852.219-75 Va Notice Of Limitations On Subcontracting Certificate Of Compliance For Services And Construction (jan 2023) (deviation) (a) Pursuant To 38 U.s.c. 8127(l)(2), The Offeror Certifies That (1) If Awarded A Contract (see Far 2.101 Definition), It Will Comply With The Limitations On Subcontracting Requirement As Provided In The Solicitation And The Resultant Contract, As Follows: (i) X Services. In The Case Of A Contract For Services (except Construction), The Contractor Will Not Pay More Than 50% Of The Amount Paid By The Government To It To Firms That Are Not Certified Sdvosbs Listed In The Sba Certification Database As Set Forth In 852.219 73 Or Certified Vosbs Listed In The Sba Certification Database As Set Forth In 852.219 74. Any Work That A Similarly Situated Certified Sdvosb/vosb Subcontractor Further Subcontracts Will Count Towards The 50% Subcontract Amount That Cannot Be Exceeded. Other Direct Costs May Be Excluded To The Extent They Are Not The Principal Purpose Of The Acquisition And Small Business Concerns Do Not Provide The Service As Set Forth In 13 Cfr 125.6. (ii) General Construction. In The Case Of A Contract For General Construction, The Contractor Will Not Pay More Than 85% Of The Amount Paid By The Government To It To Firms That Are Not Certified Sdvosbs Listed In The Sba Certification Database As Set Forth In 852.219 73 Or Certified Vosbs Listed In The Sba Certification Database As Set Forth In 852.219 74. Any Work That A Similarly Situated Certified Sdvosb/vosb Subcontractor Further Subcontracts Will Count Towards The 85% Subcontract Amount That Cannot Be Exceeded. Cost Of Materials Are Excluded And Not Considered To Be Subcontracted. (iii) Special Trade Construction Contractors. In The Case Of A Contract For Special Trade Contractors, The Contractor Will Not Pay More Than 75% Of The Amount Paid By The Government To It To Firms That Are Not Certified Sdvosbs Listed In The Sba Certification Database As Set Forth In 852.219 73 Or Certified Vosbs Listed In The Sba Certification Database As Set Forth In 852.219 74. Any Work That A Similarly Situated Certified Sdvosb/vosb Subcontractor Further Subcontracts Will Count Towards The 75% Subcontract Amount That Cannot Be Exceeded. Cost Of Materials Are Excluded And Not Considered To Be Subcontracted. (2) The Offeror Acknowledges That This Certification Concerns A Matter Within The Jurisdiction Of An Agency Of The United States. The Offeror Further Acknowledges That This Certification Is Subject To Title 18, United States Code, Section 1001, And, As Such, A False, Fictitious, Or Fraudulent Certification May Render The Offeror Subject To Criminal, Civil, Or Administrative Penalties, Including Prosecution. (3) If Va Determines That An Sdvosb/ Vosb Awarded A Contract Pursuant To 38 U.s.c. 8127 Did Not Act In Good Faith, Such Sdvosb/vosb Shall Be Subject To Any Or All Of The Following: (i) Referral To The Va Suspension And Debarment Committee; (ii) A Fine Under Section 16(g)(1) Of The Small Business Act (15 U.s.c. 645(g)(1)); And (iii) Prosecution For Violating 18 U.s.c. 1001. (b) The Offeror Represents And Understands That By Submission Of Its Offer And Award Of A Contract It May Be Required To Provide Copies Of Documents Or Records To Va That Va May Review To Determine Whether The Offeror Complied With The Limitations On Subcontracting Requirement Specified In The Contract. Contracting Officers May, At Their Discretion, Require The Contractor To Demonstrate Its Compliance With The Limitations On Subcontracting At Any Time During Performance And Upon Completion Of A Contract If The Information Regarding Such Compliance Is Not Already Available To The Contracting Officer. Evidence Of Compliance Includes, But Is Not Limited To, Invoices, Copies Of Subcontracts, Or A List Of The Value Of Tasks Performed. (c) The Offeror Further Agrees To Cooperate Fully And Make Available Any Documents Or Records As May Be Required To Enable Va To Determine Compliance With The Limitations On Subcontracting Requirement. The Offeror Understands That Failure To Provide Documents As Requested By Va May Result In Remedial Action As The Government Deems Appropriate. (d) Offeror Completed Certification/fill-in Required. The Formal Certification Must Be Completed, Signed And Returned With The Offeror S Bid, Quotation, Or Proposal. The Government Will Not Consider Offers For Award From Offerors That Do Not Provide The Certification, And All Such Responses Will Be Deemed Ineligible For Evaluation And Award. certification i Hereby Certify That If Awarded The Contract, [insert Name Of Offeror] Will Comply With The Limitations On Subcontracting Specified In This Clause And In The Resultant Contract. I Further Certify That I Am Authorized To Execute This Certification On Behalf Of [insert Name Of Offeror]. printed Name Of Signee: ___________ printed Title Of Signee: _____________ signature: ____________ date: ______________ company Name And Address: _______________ (end Of Clause) (xii) Far 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders-commercial Products And Commercial Services (feb 2024), Applies To This Solicitation. (xiii) N/a (xiv) N/a (xv) Offers Are Due Not Later Thursday, February 13, 2025, At 10:00 Am Est. Offers Must Be Submitted Electronically Via Email To Laterrica.sewell@va.gov . Questions Must Be Submitted Via Email To Laterrica.sewell@va.gov By Thursday, January 30, 2025, At 10:00 Am Est. No Late Submissions Will Be Accepted. (xvi) For Additional Information, Please Contact The Contracting Officer, Laterrica Sewell Via E-mail To Laterrica.sewell@va.gov .

Details: The Department Of Veterans Affairs Network Contracting Office 2 Is Issuing This Source Sought Synopsis As A Means Of Conducting Market Research To Identify Parties Having An Interest In And The Resources Providing Testing Of Sterile Compounding Areas At The Northport Vamc, 79 Middleville Road , Northport, Ny 11768. the Result Of This Market Research Will Contribute To Determining The Method Of Procurement. The Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 541380. the Va Requires A 12-month Base Year, Plus Four 12-month Options Contract. This Contract Will Be Inclusive Of All Labor, Materials, Equipment, And Travel (within 2 Hours) To Perform Initial And Recurring Certification Of The Facility S Sterile Compounding Areas. based On The Responses To This Sources Sought Notice/market Research, This Requirement May Be Set-aside For Small Businesses Or Procured Through Full And Open Competition. telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions. submission Instructions: Interested Parties Who Consider Themselves Qualified To Perform The Above Listed Services Are Invited To Submit A Response To This Sources Sought Notice By October 24, 2024, At 12:00pm Est. All Responses Under This Sources Sought Notice Must Be Emailed To Lee.kern@va.gov. please See The Below Statement Of Work (sow): statement Of Work testing Of Sterile Compounding Areas introduction United States Pharmacopeia (usp) Establishes Standards For Cleanroom Design, Environmental Monitoring, And Competencies For The Preparation, Handling, And Storage Of Compounded Sterile Preparations (csps). To Maintain Compliance With These Standards, Northport Vamc Requires A Base Plus Four (4) Year Contract Inclusive Of All Labor, Materials, Equipment, And Travel (within 2 Hours) To Perform Initial And Recurring Certification Of The Facility S Sterile Compounding Areas. Certification And Testing Will Consist Of: Testing All Primary Engineering Controls [(pecs) E.g., Biological Safety Cabinets (bscs), Laminar Airflow Workbenches (lafws), Compounding Aseptic Containment Isolators (caci), And Compounding Aseptic Isolators (cai)] testing All Secondary Engineering Controls (secs), Non-iso Rated Controlled Non-classified (cnc) Rooms, And High-efficiency Particulate Air (hepa) Filtration Devices. microbiological Laboratory Testing Of Collected Viables Samples. wipe Sampling For Environmental Hazardous Drug (hd) Residue testing And Certification Must Be Completed In Accordance With The Most Currently Published Versions Of Usp Chapter , Usp Chapter , Controlled Environment Testing Association (ceta) Application Guides For: Cag-003 Certification Of Sterile Compounding Facilities For Usp Compliance, Cag-002 Compounding Isolator Testing, Cag-008 Certification Matrix For sterile & Nonsterile Usp Compounding Facilities, Cag-009 Viable Environmental Monitoring For Sterile Compounding Facilities, Cag-014 Airflow Visualization Study, National Sanitation Foundation/american National Standards Institute (nsf/ansi) Standard 49 Biosafety Cabinetry, And Institute Of Flow Clean Air Devices, Iest-rp-cc-002.4. All Lab Analysis Of Viable Samples Must Be Performed By A Facility With Iso/iec 17025 Accreditation For Microbial Analysis. This Environmental Quality Testing May Not Be Performed Under The Laboratory S Clinical Laboratory Improvement Amendments (clia) License. The Lab Must Attain Iso/iec 17025 Certification From An External Accrediting Body (e.g., American Association For Laboratory Accreditation ) To Ensure Quality And Accuracy Of The Testing. background. northport Vamc Is Pursuing A Facility Contract For Certification Of All Pecs, Secs, Cnc Rooms, And Hepa Filters Must Be Performed Pursuant To The Most Current Version Of Usp Chapter And Usp Chapter Standards Following Ceta S Standardized Testing Procedures Which Include (but Is Not Limited To) Cag-003 Ceta Certification Guide For Sterile Compounding Facilities For Usp Compliance, Cag-002 Ceta Compounding Isolator Testing Guide, Cag-014 Airflow Visualization Study, And Cag-009 Viable Environmental Monitoring For Sterile Compounding Facilities. certification Must Be Performed Every 6 Months. Recertification Will Be Required After Any Servicing Of Facilities Or Equipment, Post Changes To The Area That Could Affect Airflow Or Air Quality ( E.g., Redesign, Construction, Replacement Or Relocation Of Any Pec, Or Alteration In The Configuration Of The Room), And/or In Response To Identified Problems Or Trends. certification Procedures Defined In Relevant Ceta Application Guides Must Be Performed No Less Than Every 6 Months By An Individual Who Has The Required Ceta Competencies And Training Related To The Certification Of Primary And Secondary Engineering Controls. Additionally, It Is Preferred That The On-site Certification Individual Have Received Nsf Accreditation For The Field Certification Of Class Ii Biosafety Cabinets And Are Accredited Through Cnbt As A Registered Certification Professional In The Sterile Compounding Facility (rcp-scf). Prior To Testing, The Contractor S Technician(s) Who Conduct On-site Certification Will Provide, To The Cor, Documentation Of Competency And Training Related To The Certification Of Pecs And Secs. procedures For Air And Surface Sampling And Evaluation Must Be Compliant As Per The Most Current Usp Chapter 797 Requirements For Environmental Air Sampling, Surface Sampling (cag-009), Gloved Fingertip Testing (cag-011), And Media Fill Testing (cag-013) Following The Appropriate Ceta Cag Application Guide. northport Vamc S Sterile Compounding Areas And Equipment Must Be Compliant To The Joint Commission (tjc) And Food And Drug Administration (fda) Requirements. Tjc Medication Compounding Requirements For Critical Access Hospitals And Hospitals, Effective January 1, 2024, Established New Medication Compounding (mc) Standards For Non-sterile And Sterile Compounded Preparations Which Are Based On Usp Standards. The Fda Has The Authority To Inspect Va Medical Facilities Under The Food, Drug And Cosmetic Act, And Evaluate Based Upon The Guidance Provided In The Insanitary Conditions At Compounding Facilities Guidance For Industry, November 2020 (or Most Current Version). scope testing Frequency. the Northport Vamc Has A Requirement For Onsite Initial And Reoccurring Ceta Certification And Viable Environmental Sampling Of The Facility S Pharmacy-specific And Non-pharmacy Specific Areas And Equipment As Detailed Within This Statement Of Work (sow). Testing And Certification Dates Contained Within This Sow Are Best Documented; Contractor Shall Be Responsible To Confirm And/or Adjust Certification/testing Requirements To Ensure No Lapse In Requirements And Thus No Undesirable Effect On The Mission Of The Northport Vamc. all Pharmacy-specific Equipment Will Minimally Obtain Ceta Certification Every Six (6) Calendar Months From The Date Of The Last Certification/testing Of Bscs, Lafws, Cai, Caci, Hepa Filters, And Room Spaces/environments In Accordance With Vha Directive 1108.12 (see Attachment A), And Usp 797 (attachment B) & 800 (attachment C). Recertification May Be Required Sooner If Equipment Is Relocated/altered, Or A Major Service Is Performed. testing Locations. The Following Location Shall Be Tested As Per Usp 797 And Where Applicable Usp 800 Standards As Per Respective Ceta Guide Applications. Locations May Be Amended As Per The Facility S Renovations And Construction. building 200, Unit 31 Cleanroom Suite(s) Primary Space(s) And Equipment iso-8 Anteroom(s): Two Ceiling Mounted Hepa Filters iso-7 Buffer Room(s) two Ceiling Mounted Hepa Filters one Iso-5 Lawf: Baker Edgegard 5252 Lawf building 200, Inpatient: One Iso-5 Compounding Aseptic Isolator (cai): Baker Ss-500 building 200, New Pavilion 2f, E2-49 hd Negative Pressure Storage Room: One Ceiling Mounted Hepa Filter cnc Hd Negative Pressure C-sca one Ceiling Mounted Hepa Filter one Iso-5 Hd Negative Pressure Compounding Aseptic Containment Isolator (caci): Baker Cs-500 germfree Trailer (adjacent To Building 11) - This Location Will Be Covered Under This Contract For Monthly Viable Sampling And Hazardous Drug Wipe Sampling. note: There Is A Separate Contract Which Covers The Semiannual Ceta Testing And Viable Sampling Of The Trailer. testing Requirements Of Pecs. biological Safety Cabinet (bsc): On-site Certifications Of The Bscs Shall Be Tested To Manufacturer Specifications In Accordance With The Most Recent Version Of Nsf/ansi Standard 49 Biosafety Cabinetry (as Per Ceta Cag-003:2022 Section 8.2. Through 8.2.5 Application Guide And Ceta Cag-005:2007 (or Most Current Versions) compounding Aseptic Isolator (cai) And Compounding Aseptic Containment Isolator (caci): The Contractor Shall Test And Certify All Cais And Cacis As Per Ceta Cag-003 Sections 8.3 Through 8.3.5 And In Accordance With Ceta Cag-002 Guide Application. laminar Air Flow Workbench (lafw): The Contractor Shall Test And Certify All Lafw As Per Ceta Cag-003:2022 Section 8.4. Through 8.4.6 Application Guide (or Most Current Version) the Contractor Shall Test And Certify All Pecs In Accordance With The Most Current Version Of The Institute Of Environmental Sciences And Technology (iest)-rp-cc002 (unidirectional Flow Clean-air Devices), Ceta Cag-003, And The Manufacturer's Specifications. the Contractor Shall Record Each Individual Face Velocity Reading And The Average Of Those Readings, The Downstream Concentration Reading Of The Hepa Filter Leak Test And The Results Of The Induction Leak Test And Back Streaming Test all Equipment Used To Certify Pecs Must Be Calibrated In Accordance With Iest-rp-cc013 Or Manufacturer's Recommendation And Be Nist Traceable Where Possible. where Applicable The List Of Tests For Pecs Includes, Where Applicable But Not Limited To The Following: air Flow Velocity Profile air Flow Visualization Profile: Dynamic Smoke Pattern Testing (video Recorded And Provided To Us On A Thumb Drive Or Made Available For Download On A Secure Website) For All Primary Engineering Controls. Tester Must Utilize Sufficient Smoke To Demonstrate Unidirectional Airflow At Critical Sites And Sweeping Action Over And Away From Preparations. prefilter Check hepa/ulpa Filter Leak Integrity Testing (must Be Performed Upon Installation And As Part Of Certification) induction Leak Integrity Test And Patching If Necessary electrical Leakage And Ground Circuit Resistance And Polarity Tests preparation Ingress And Egress Test Where Applicable chamber Pressure Test total Airborne Non-viable Particle Count Testing In All Classified Areas Performed Under Dynamic Operating Conditions for Each Pec Passing The Required Certification Tests, The Contractor Supplies Each Unit With A Certification Tag Or Sticker Displaying The Following Information: company Name And Contact Information. unit Make, Model And Serial Number. report Number location (e.g., Building, Room Number, Area Identification) certification Date recertification Date technician Name And Signature any Pec That Fails To Meet Ceta Specifications Shall Be Clearly Marked With Signage Which Alerts Compounding Personnel That The Unit Is Out Of Order Until Further Notice. testing Requirements Of Secs. the Contractor Will Provide Comprehensive Cleanroom Testing And Certification Services Every 6 Months, In The Event Of An Environmental Or Engineering Control Excursion/exceedance Or Sooner If There Are Changes To The Area Such As Redesign, Construction, Replacement Or Relocation Of Any Pec, Or Alteration In The Configuration Of The Room That Could Affect Airflow Or Air Quality Or If A Cleanroom(s) Did Not Meet Compliance. Certification Tests For Rooms Within A Cleanroom Suite Include, But Are Not Limited To: airflow Testing: Hepa Filter(s) Air Volumes And Velocities Will Be Measured And Documented As Per Ceta Cag-003:2022 Section 8.1.1 Application Guide (or Most Current Version) Airflow Testing Is Performed To Determine Acceptability Of The Air Velocity, The Room Air Exchange Rate, And The Room Pressure Differential In Doorways Between Adjacent Rooms To Ensure Consistent Airflow And That The Appropriate Quality Of Air Is Maintained Under Dynamic Operating Conditions. the Contractor Shall Calculate The Total Room Area And Volume For Each Buffer Room, Anteroom, Containment Segregated Compounding Area (c-sca), And Hazardous Drug Storage Room. The Iso Classification And A Sketch Of The Room With Dimensions, Exhaust/supply Diffuser Locations And Equipment Locations Shall Be Included In The Report. The Report Provided Will Specify Flow Rates Detailing Returns And Supply That Were Obtained During The Testing. The Contractor Shall Calculate Air Changes Per Hour (acph) For Each Buffer And Anteroom And Include Their Findings In The Report. Acph For Hvac, Acph Contributed From Pec, And The Total Acph. Comparison Of Acph Will Be Completed Both For Usp 797 Standards As Well As Those Referenced In The Vha Hvac Design Manual (attachment D Or Earlier Version If Available), Which Are Further Stringent Than Usp Chapter 797. iso Classified Turbulent Airflow Area Reporting And Documentation record All Airflow Measurements And Their Corresponding Filter Or Diffuser Locations Or Grid Identifications On A Diagram calculate And Report Room Volume calculate And Report The Average Total Room Airflow Volume calculate And Report The Total Air Changes Per Hour Of The Room (include Lafw And/or Non-ducted Bsc Hepa Exhaust To Room, Where Applicable) report Any Correction Factors Used Or Deviations From The Primary Method name Of Test (e.g., Room Airflow Analysis) report Acceptance Criteria provide A Pass Or Fail Statement Based On The Results Of The Test non-iso Classified Negative Pressure Turbulent Airflow Area Testing Procedure Including Acph Requirements For Containment Segregated Compounding Areas And Hazardous Drug Storage Areas, Must Be A Minimum Of 12 Exhaust Acph. Because These Rooms/areas Are Not Iso Classified Airflow Measurements Should Be Taken On The Exhaust Of Negative Pressure Differential Rooms. Non-iso Classified Negative Pressure Turbulent Airflow Reporting And Documentation Must Include: record All Airflow Measurements And Their Corresponding Exhaust Filter Or Exhaust Grill Locations calculate And Report Room Volume calculate And Report The Average Total Room Airflow Volume calculate And Report The Total Air Changes Per Hour Of The Room report Any Correction Factors Used Or Deviations From The Primary Method name Of Test (e.g., Unclassified Negative Pressure Room Airflow Analysis) report Acceptance Criteria provide A Pass Or Fail Statement Based On The Results Of The Test sec Hepa Filter Integrity Testing Performed As Per Ceta Cag-003:2022 Section 8.1.2 Application Guide (or Most Current Version) record Upstream Aerosol Challenge Concentration list Method Used To Report Concentration (measured Or Calculated) record Maximum Leak Penetration In Percent name Of Test (hepa Filter Leak Test) report Acceptance Criteria provide A Pass Or Fail Statement Based On The Results Of The Test sec Room Pressure Differential/room Pressurization As Per Ceta Cag-003:2022 Section 8.1.3 Application Guide (or Most Current Version) the Contractor Shall Include In Their Report Differential Pressure Readings From Each Buffer Room, Anteroom, C-sca, And Hazardous Drug (hd) Storage Rooms To All Surrounding Areas. the Report Shall Indicate Whether The Area Is Required To Be A Negative Or Positive Pressure Location As Per Usp 797 And/or Usp 800. All Readings And Acceptance Criteria Shall Be Documented To At Least One Thousandths Of An Inch Water Gauge Or Water Column (e.g., 0.020 W.g. And Not 0.02 W.g.) Or One Tenth Of A Pascal (e.g., 5.0 Pa). Pressure Differentials Will Be Reflected On A Report Showing The Sketch Of The Room(s). sec Room Pressure Reporting And Documentation report Room Pressure Differential Relative To An Adjacent Room/space report And Compare Performance Of Room Pressure Monitor report Whether Smoke Dispersed At Entry Doors Follows Correct Direction name Of Test (room Pressure Differential Test) report Acceptance Criteria provide A Pass Or Fail Statement Based On The Results Of The Test total Airborne Particle Count Testing (0.5 Micron And Larger) In All Classified Areas Performed Under Dynamic Operating Conditions As Per Ceta Cag-003:2022 Section 8.1.5 Application Guide (or Most Current Version). Reporting Shall Be Completed Following Iso 14644-01 [2015] Section 5.4 Test Report And Shall Include The Following: the Name And Address Of The Testing Organization, And The Date On Which The Test Was Performed the Number And Year Of Publication Of This Part Of Iso 14644 (i.e., Iso 14644 1:2015) a Clear Identification Of The Physical Location Of The Cleanroom Or Clean Zone Testing (including Reference To Adjacent Areas If Necessary), And Specific Designations For Coordinates Of All Sampling Locations (a Diagrammatic Representation Can Be Helpful) the Specified Designation Criteria For The Cleanroom Or Clean Zone, Including The Iso Class Number, The Relevant Occupancy State(s), And The Considered Particle Size(s) details Of The Test Method Used, With Any Special Conditions Relating To The Test, Or Departures From The Test Method, And Identification Of The Test Instrument And Its Current Calibration Certificate the Test Results, Including Particle Concentration Data For All Sampling Locations report Acceptance Criteria provide A Pass Or Fail Statement Based On The Results Of The Test sec Airflow Visualization Studies (avs) - Visual Smoke Studies Per Ceta Cag-014 Guide Application sec General Temperature And Moisture Tests To Verify Accuracy Of Monitoring Devices As Per Ceta Cag-003:2022 Section 8.1.7 Application Guide (or Most Current Version) sec Viable Sampling As Per Ceta Cag-003:2022 Section 8.1.6 And Cag-009:2020 Application Guides viable Sampling Testing All Viable Sampling Will Conform To Usp 797 Requirements And Performed As Per Ceta Cag-009 Application Guide Viable Environmental Monitoring For Sterile Compounding Facilities environmental Air Sampling. biannually (every Six Months) The Collection Of Environmental Air Samples Will Be Performed By The Contractor S Ceta Technician During Certification And During Negatively Impactful Incidents Which Require Repeat Air Sampling As Follows: whenever There Is A Change To The Placement Of Equipment In The Room Or Any Other Alteration Within The Cleanroom Suite That Affects The Quality Of The Air. in Response To Identified Problems And Trends. in Response To Changes That Could Impact The Sterile Environment (changes In Cleaning Agents). viable Air Sampling Will Be Performed Utilizing A Calibrated High-volume Impaction Sampler During Dynamic Operating Conditions Single Plate Tsa Media Which Supports Growth Of Both Bacteria And Fungi Will Be Used To Sample. A Sufficient Volume Of Air (1000 Liters) Shall Be Tested At Each Location To Maximize Sensitivity (samples Of Less Than 1000 Liters Will Not Be Acceptable) positive And Negative Control Plates Will Be Included With Sampled Plates Submitted By The Contractor For Analysis. environmental Surface Sampling. biannually (every Six Months) The Collection Of Environmental Surface Samples Will Be Performed By The Contractor S Ceta Technician And During Repeated Ceta Testing. Upon The Request Of The Facility, The Contractor Will Repeat Surface Sampling As Follows: whenever, There Is A Change To The Placement Of Equipment In The Room Or Any Other Alteration Within The Cleanroom Suite That Affects The Quality Of The Air. in Response To Identified Problems And Trends. in Response To Changes That Could Impact The Sterile Environment (changes In Cleaning Agents). surface Samples Will Be Collected In Each Room, The Interior Of Each Pec, Passthrough Chambers Connecting To Classified Areas, And Frequently Touched Surfaces (e.g., Door, Tables, Carts, Stools, Benches, Etc.) surface Sampling Will Be Performed At The End Of The Largest Csp Activity Of The Day But Before Area Has Been Cleaned And Disinfected. single Plate Tsa Media Supplemented With Neutralizing Additives (e.g., Lecithin And Polysorbate 80) To Neutralize The Effects Of Any Residual Disinfecting Agents Will Be Used. routine Monthly Surface Sampling Will Be Performed By An Appointed Trained Northport Vamc Personnel. The Collected Samples Will Be Shipped To The Laboratory Service Employed By The Contractor For Incubation And Microbiological Analysis. as Needed, Appointed Trained Northport Vamc Personnel Will Collect Surface Samples Within The Pec As A Part Of The Competency Assessment For Assigned Personnel. The Collected Samples Will Be Shipped To The Laboratory Service Employed By The Contractor For Incubation And Microbiological Analysis. personnel Viable Sampling. The Collection Of Personnel Viable Samples For Competency Testing Will Be Performed By An Appointed Trained Northport Vamc Personnel. The Samples Will Be Shipped To The Laboratory Service Employed By The Contractor For Incubation And Microbiological Analysis When It Is Required For Personnel Competency Assessment Sampling As Follows: gloved Fingertip And Thumb (gft) Testing upon Initial Assignment Compounding Staff Will Be Assessed, Post Hand Hygiene And Garbing, Utilizing Gft Samples In Triplicate (three Samples/hand) For Analysis. every Six (6) Months And Thereafter Compounding Staff Will Be Assessed, Post Hand Hygiene And Garbing, Utilizing Single Collection Of Gft Samples (one Sample/hand) Will Be Collected For Analysis Post Hand Hygiene And Garbing. initially And Every Six (6) Months Thereafter Compounding Staff Will Be Assessed For Gft During Aseptic Manipulations, Utilizing Single Collection Of Gft Samples (one Sample/hand) Post Media Fill Testing (mft). media Fill Test (mft) upon Initial Assignment And Every Six Months Thereafter, Compounding Staff Will Be Assessed For Aseptic Manipulations Utilizing Usp 797 Compliant Media Fill Testing Kits. other Viable Sampling Requirements. the Laboratory Service Employed By The Contractor Must Be Able To Provide The Following: microbial Growth Media Plates Which Are Usp 797 Compliant And include Certificates Of Analysis (coa) From The Manufacturer That Verify The Plates Meet The Expected Growth Promotion, Ph, And Sterilization Requirements Consistent With Usp Chapter 797 contain Tsa Supplemented With Neutralizing Additives (lecithin And Polysorbate 80) have A Raised Convex Surface support Both Bacterial And Fungal Growth On The Same Plate For Single Media Incubation media Fill Testing (mft) Kits Compliant To Usp 797 And Designed To Simulate Medium Complexity (category 2) Sterile Iv Compounding. simulate Low Complexity (category 1) Sterile Iv Compounding. a Chain Of Custody Documenting Each Sample Collected Must Be Created And Provided To The Northport Vamc . during Self-sampling, Which Is Performed By Northport Vamc, The Contracted Lab Is Responsible For Providing A Prepaid Mailer For Properly Sending Samples To The Laboratory For Testing. all Samples Shipped To The Laboratory Service Must Be Incubated In Accordance With Current Usp Chapter 797 Requirements For Duration And Temperature. additional Requirements For Pecs And/or Secs Testing any Pec Or Sec That Fails To Meet Ceta Specifications Shall Be Immediately Reported Directly To The Site-identified Point(s) Of Contact (poc) Or Appointed Ad Hoc. areas Where Hazardous Drug Handling Occurs Will Be Tested By Environmental Wipe Sampling For Hazardous Drug (hd) Residue: every 6 Months, Or More Frequently As Needed To Verify Contaminant, Environmental Wipe Sampling For Hd Residue Will Be Performed By An Appointed Trained Northport Vamc Personnel. The Collected Samples Will Be Shipped To The Contractor S Laboratory Service For Hd Residue Analysis. The Kits Used To Complete Hd Wipe Sampling Must Be Verified Prior To Use To Ensure The Sensitivity And Validity Of The Methods And Reagents Used To Recover A Specific Percentage Of Known Marker Drugs. the Hazardous Drugs (hds) To Be Tested Will Be Determined By The Facility And May Include, But Are Not Limited To: cyclophosphamide ifosfamide fluorouracil gemcitabine methotrexate platinum-containing Drugs taxane-based Drugs on Average 14 Surface Environmental Hd Wipe Samples Will Be Collected Per Testing Date. The Facility Can Elect To Adjust The Quantities Of Samples Submitted As Needed During Investigative Remediation. Routine Environmental Hd Wipe Sampling Will Include, At Minimum, The Following Areas: interior Of Containment Primary Engineering Control (c-pec) And Any Equipment Contained Inside The C-pec. pass-through Chambers. surfaces In Staging Or Work Areas Near C-pec. areas Adjacent To C-pecs (e.g., Floors Directly Under C-pec, Staging, And Dispensing Area). areas Immediately Outside The Hazardous Drug Buffer Room Or C-sca. areas Designated For Pharmacist End Product Verification (checking) / Workstations. hazardous Drug Storage Areas (including Refrigerators). hazardous Drug Receiving Areas. patient Administration Areas. competency Of Technician Performing Testing ceta Testing Must Be Performed By A Cnbt Individual/company Accredited To Perform This Work. The Technician/contractor Shall Provide A Copy Of The Individuals Ceta Credentials At Time Of Offer. If, During The Contract, A Different Individual(s) Is Designated By The Contractor, The Ceta Certification Credentials Of The Assigned Individual(s) Must Be Provided To The Poc, Co, And Cor Prior To The Start Of Work. to Ensure Accurate And Reproducible Sampling Results, Environmental Viable Sampling Should Be Performed By A Ceta Cnbt Technician Or A Trained Technician Competent In Air And Surface Sampling Procedures. Prior To Sampling The Contractor Must Provide The Facility Documentation Records For The Individuals Training And Competencies To Perform Sampling. additional Contracting Requirements certification Periodicities Shall Be Confirmed By Contractor, Post Award, And Adjusted As Necessary To Meet The Needs Of The Northport Vamc. certification And Testing Shall Conform To Usp And Osha Standards. technician Will Disinfect And Sanitize All Equipment Brought Into The Cleanroom Suite Or Segregated Compounding Area Prior To Entry (with Preemptâ® Or Peridoxâ® (or Facility Approved Disinfectant Cleaner), Followed By Sterile 70% Isopropyl Alcohol Or As Per Current Standard Operating Procedure For The Cleanroom Suite). contractor Will Follow Northport Vamc S Protocols For Use Of Ppe In The Classified Spaces And Understands The Risks Associated With Facilities And Equipment Designed For Storage And Preparation Of Hazardous Drugs. the Contractor Shall Comply With Federal, State, And Local Laws, Plus And Federal Regulations As Applicable To The Performance Of This Contract; To Include Usp Chapter 797 And Usp Chapter 800. Contractor Must Obtain All Necessary Licenses And/or Permits Required To Perform The Work Herein. reporting Results For Ceta Testing (including Viable Sampling) a General Report Documentation For All Ceta Test Results Must Be Provided Via Email Directly To The Cor (contracting Officer Representative), Chief Of Facility Management Services, Chief Of Pharmacy Service, And To The Designated Compounding Pharmacist No Later Than One Week After The Testing Is Performed. The Ceta Report Will Be A Comprehensive Informative Report Of The Certification Process Which Will Include A Statement Of Compliance Or Non-compliance Regarding The Requirements And Guidelines Outlined Respective To Ceta Application Guide. The Formal Report Will Include As A Minimum, But Not Limited To, The Following Items: name, Address, And Contact Information For The Certifying Organization Also Listing Key Personnel With Appropriate Accreditations Including The Name Of Ceta-certified Technician Performing The Testing. confirming Remark That Facility/equipment Was Tested In Accordance With Ceta Cag-003:2022 (or Most Current Version) And Any Other Applicable Performance Testing Standard Followed. The Most Current Version Of This Cag Must Be Referenced. Note: Usp 797 Is Not A Certification Specification. explanation Of Test Procedure Used For Data Collection And Justification For Any Deviations From Established Industry Practices Encountered During The Certification Process. a List Of Test Equipment Utilized In Data Collection. List Shall Include Make, Model, Serial Number, And Calibration Date. A Copy Of The Current Calibration Documentation For Each Piece Of Equipment Must Be Provided When Requested. required Reporting Values Listed In Each Test Section type, Make, Model And Serial Number For Each Pec Tested each Pec And Sec Nonviable Particulate Counts (including Sample Volume And Time) And Iso Classification measured Air Velocity Data For Pec, Including Air Flow In Cfm, Average And Standard Deviation Of Air Velocity Measurements And Acceptance Criteria pec Blower Setting And Pressure Gauge Reading (if Any) for Bscs: measured Downflow Air Velocity Data, Acceptance Criteria And Pass/fail Result measured Exhaust Damper Acceptance Criteria And Pass/fail Result inflow Velocity Test Method, Measurements, And Results documentation Of Results For The Video Of The Airflow Smoke Pattern Test Documenting Unidirectional Flow At Critical Sites In The Pec. total Air Changes Per Hour (acph) For Each Sec, With Indication Of Acph Supplied By The Pecs pressure Differentials Between Each Sec And The Anteroom/pharmacy results Of Hepa Leak Tests For All Filters Tested, As Well As The Results Of Any Patching That Was Performed if Leaks Were Detected And Sealed, Include A Diagram Showing Approximate Location Of Sealed Leaks prefilter Type, Size, And Condition For Each Pec sec Temperature And Relative Humidity video Recording Of All Smoke Pattern Testing (airflow And Dynamic) alarm Test Results (if Any) a Diagram Of The Areas Tested, Noting The Approximate Location Of Air And Surface Particle Counts any Recommendations For Hepa Replacement/hepa Lifespan microbiological Lab Analysis Reports Must Meet The Following: the Laboratory Performing Microbial Analysis Must Be An American Association For Laboratory Accreditation (a2la)-accredited Laboratory With Iso/iec 17025 Certification For Microbiological Testing. all Viable And Non-viable Analyzed Sampling Results Must Be Provided Via Email Directly To The Chief Of Facility Management Services, Chief Of Pharmacy Service, And To The Designated Compounding Pharmacist No Later Than 2 Weeks After Sampling Is Performed. At A Minimum, The Provided Lab Analysis Report Must Include: the Manufacturer, Lot Number, And Expiration Date For Each Media Lot Analyzed. date And Time Sampling Was Performed. comments Indicating Sampling Under Dynamic Conditions. sampling Location(s), With A Site Map Sketch Identifying Location Of Each Sample Obtained. sampling Type And Incubation Dates, Temperature, And Duration Intervals. quantitative Number Of Discrete Colonies Of Microorganisms On Each Media Device As Colony Forming Units (cfus) Of Bacterial/fungal Isolates. Results Equal To Or Greater Than The Action Level Will Require Immediate Notification To The Facility S The Poc(s). recovered Organisms Identified To The Genus Level (the Pharmacy Must Be Notified Of Any Microbial Growth Immediately After It Is Identified (no Later Than 48 Hours After The Report Is Received By The Contractor From The Laboratory). determination Of Whether Lab Findings Are Actionable (e.g., Acceptable/unacceptable As Per Usp 797). response-travel- Expense Considerations response Time- The Contractor Shall Use Commercially Reasonable Efforts To: provide Technical Support Via Telephone To Northport Vamc On A 24/7, 365 Days A Year Schedule. respond By Telephone To Any Report Of A Malfunction Requiring Repair Within One Hour Of Notification. provide On-site Support Within 2 Hours Of Notification Unless Prevented By Unforeseen Circumstances. travel Time due To The Time Sensitive Nature Of Testing, The Contractor Must Guarantee A Maximum Two-hour Time Travel And Arrival At Facility On Scheduled Testing Dates For Any Required Testing Personnel And Equipment. travel Expenses- contractor Shall Be Responsible For All Service-related Equipment Shipping And Tester S Trip Expenses, Including But Not Limited To Round Trip Travel, Mileage, Meals, And Overnight Living Expenses. title To Equipment- Contractor Shall Not Assume Possession Or Control Of Any Part Of The Equipment. The Government Retains Ownership To Title Thereof. utilities- Contractor May Use Government Utilities, (e.g., Electrical Power, Compressed Air, And Water) Which Are Available And Required For Any Service Performed Under This Contract. access To Equipment- Contractor Shall Be Provided Reasonable Access To All Equipment That Is To Be Serviced And Utility Outlets Required To Do The Service. The Contractor Shall Be Free To Start And Stop All Primary Equipment Incidentals To The Operation Of The Maintained Equipment After Permission Is Received From On Duty Personnel Responsible For Such Equipment. parts And Materials- All Compensation For Parts And Materials Is Included In Contract Price. parts/supplies Quality- Parts And Supplies Provided Under This Contract Shall Be New Oem (original Equipment Manufacturer) Parts. field Service Reports- Contractor Shall Furnish A Written Or Electronic Vendor Supplied Field Service Report (fsr). place Of Performance. northport Vamc 79 Middleville Road northport, N.y. 11768 period Of Performance. base Plus Four (4) Option Years information Security/privacy/ Records Management this Contract Does Not Involve Access To Va Patient/employee Information And Does Not Involve Access And/or Connection To The Va Information System. va Privacy Training For Personnel Without Access To Va Computer Systems Or Direct Access To Or The Use Of Va Sensitive Information the Department Of Veterans Affairs, Va Must Comply With All Applicable Privacy And Confidentiality Statutes And Regulations. One Of The Requirements In Va Is To Have All Personnel Trained Annually On Privacy Requirements. Privacy Represents What Must Be Protected By Va In The Collection, Use, And Disclosure Of Personal Information Whether The Medium Is Electronic, Paper Or Verbal. this Document (20939 Training) Satisfies The Basic Privacy Training Requirement For A Contractor, Volunteer, Or Other Personnel Only If The Individual Does Not Use Va Sensitive Information Or Protected Health Information (phi) In Any Form Such As Electronic Or Paper Or Have Access To Any Va Computer System. the Contracting Officer Representative (cor/ Cotr/ Project Manager) Is Responsible To Obtain This Training From The Contractor And To Maintain According To The Records Control Schedule (rcs 10-1).

Details: I. Premio Postępowanie:: . 1. Premiotu Zamiotu: - Konektor Męski, Żeński 2.5 Mm2 Złona, 2-wtyczowy Do Sa 132/134 - Szt. 2. The Asortyment Musi S meet the Poniższe Wymagania: Być New I Wolny Od Wad, original, unobgnanimed the Laws of the Thirds, Toulouse, Toulouse: To make the New I Wolny Od Wad, original, unobciążed Laws of the Thirds, the Third Laws, the Third Laws. 3. The document: Brakkk. 4. Seeing Na Względzie Przepisy Rozporząd Wykonawskich Commission (ue) 2019/779 z dnia 16 Maja 2019 R. Ustanawiczy Szczegółowe Przepisy Dotyczące Systemu Certification Podmiotów Odmitów Za Utakie Pogonów According to the Directive of the European Parliament Iue (2016/79). As a spokesperson for the Prosecution of the European Parliament of the Council (ue) 2016/798 Z dnia 11 Maja 2016 R. In the case of Kolei (R. No. 138, Str. 102 Zózn.), Ming Na Względzie Wpływać In confirmation, Że Przedmiot Zajdanie will be Realized by the Executives of the I Udokumented System of Utrzynia I Management is the Omission, the Omission, the Omission, the Omission, the Omission, the Omission, the Omission, the Omission, and the Omission System of Education, is to receive the Omission, the Omission, the Omission, the Omission, the Office of the Office of Education, and the Management of the Office of the Office of the Management of the Office of the Office of the Office of the Office of the Management of the Office of the Management of the Office of the Office of the Office of the Management of the Office of the Management of Education is to the Management of the Management of Educational Management of Educational Management of Education, the Educational Management of Educational Management of Education, the Educational Management of Education, the Office, the Office, the Office, the Office, the Office of Education, the Office, the Office, the Office, the Office, the Office, the Office, the Office, the Office of the Office of the Office, the Office, the Office, the Office of the Office of the Office of the Office Iv Pkt 4. 5. Kryterium Oceny Ofert: Cena 90%, 10% Termin Realization. "Ii. Warunki Realization". The term Realization - Oczekied by the Termin Realization of the 7th Amendment. Ws argues, Że Dopuszcza Złoż Z Terminem Dłużych Niż 7 Dni Roboskich. For Określona W Kryterium Terminu Realization Unit "day" is the "Dni Roboczeczecze. - Godziny Realization - 8:00 Do 14:00 :0000 - - - - - - - - - - - - - Godziny Realization - 8:00 - 8:00 - - 8:00 - - - 8:00 - - - - - - - - - Godziny Realization - 8:00 - - - - - - - - - - - - - - - - - - - - - 8:00 - 8:00 - 8:00 - - 8:00 - 8:00 - 8:00 - 8:00 - - 8:00 - - - - - 8:00 - - 8:00 - - 8:00 - 8:00 - - 8:00 - - 8:00 - - - 8:00 - - - - - - 2. The Dostarczenie I Rozładunku Towaru – According to Do Owdddd. 3rd Place Dostawy: Koleje Wielkopolskie Sp. Z O.o. Ul. Kolejowa 23, 60-717 Poznań, Punkt Utrzynia Tabor Poznań. No later Niż Na 12 Godziny Before the Reformation of the Order, Zobowiązany is to confirm the Termin Dostawy Towaru, and to confirm the Termin Dostawa, Towaru, the term of the Towaru, to confirm the Termin Dostawa, and to confirm the Termin Dostawa, to confirm the Towaru, and to confirm the term of the Towaru. In this God. 4. Dostawa: Dostawa Oneorazowa, Cena Winna features the Dostawy I Rozładunku. 5. Termin Płatności – According to Z Owd; (termin of 30 Dni Od Wyciery) 6. Warunki Gwarancja – According to Z Owd. 7. Wad Wad W Ramach Gwarancja - According to Z Owd. 8. Kary Umowne - § 7 Owddddd. Iii. "Pobieg Postępowanie:: Przebieg Postępowanie". Informs, Że Postępowanie Prowadzone is W Two Etapach:: W Two Etapach: A) a. I Etap - It consists of Ofert, - I Etap. "Ii Etap - Licytacja Electroniczna - Licytacja Rozpocznie Się Automatyowo po Zakończowanie I Etapu I Potrwa 15 Minut Oraz Dogrywki - Podetap Ii Etapu, Których Warunki Oscription 15 Minut Oraz Dogrywki - Podetapu - Podetapu - Podetapetapetap I Otapu, Których Warunki Okładnie Opisowanie Opisacji Opisowanie Naępowanie Naępowanie Naępowanie Nakupowej. Each Dog runs Trwa 3 Minuty - Uruchomia Się, If W Ciągu Lasts 3 Minut Postępowanie Zostan Złoowana Prawidłowo Another Oferta (instead). Executives of Zaakcepted by Zamawiać, Którzy Na Etapie consisted of Ofert (i Etap) don't give the right-wing Oferty, Zostana Automatically Extension. As a member of the Na Realization of the Order of the Umbifying Na Platformie Zakupowej Information O Wyborze Najkorzystniejszy Oferty. With Chwila, O Której Mowa W Zdanie Poprzednim Nauje Udzielenie Zadania. As a result, W Each time Upravated is Do Od Udzielenie. Iv. Informs, Że Udział W Przedmiotego Postępowanie jest Eoznaczny ze Złożym Poniższe Oświęcie: Experience: Receivement: Examination: Exploration: Examination: Exceptual experience: Examination: Examination: Examination: Examinations: Examination: Examinations: Examination: Examinations: Examinations: Examinations: Examinations: Examinations: Examinations: Examinations: Examinations: The experience: The experience of the experience of the experience: The experience: The experience: The experience: The experience: The experience: The experience: The experience: The experience: The experience: The experience: The experience: The experience: The experience: The experience: The experience of the experience of the experience of the experience of the experience of the experience: The experience of the experience: The experience: The experience: The experience: The experience of the experience: The experience: The experience: The experience of the experience: The experience: The experience: The experience: The experience: The experience: The experience of the 1. "Oświadczam, Że Wypełnił Obowiązekcyjny Przewidziane W Art. 13 Lub Art. 14 Rodo*) Wobec Osób Fiztyczne, Od Których Dane Osobowe Bezpo Middleo Lub Pozyskał Wunia Się Udzielenie Zadzielenie Zadzielenie Zadzielenie, Od Których Wtórychny Nizhny Postępowenie. *Distruction of the European Parliament I Council (ue) 2016/679 z dnia 27 Kwietnia 2016 R. In the case of the Protection of the Fiscal In the Union of the Distribution of Danch Osobowych I W Sprawie Swobodnego Przepływać 2. "Oświadczam, Że Wyrażam Zgodę Na Faceanie Moich Danch Osobowych Przekazanych przez Mnie Dobrowolnie Do Zamawiający". Z Art. 13 Rodo - It was populated by the Eb2bbup web page. In the Department of Computer Science. 3. As a result, Że Oferta Cenowa Na Platformie Zakupowej Z put Osoba Umocowana Do presentnie Wykonawcy. 4. I am aware, I will be Realized by the Confucians, possessing the Odpowiedni I Udokumented System of Utrzynia I Management of W Rozumienie Pkt 9.2 Lit. "B) Załącznik Ii Do Rozporząd wykonawskiego Commission (ue) 2019/779 z dnia 16 Maja 2019 R. Ustanawiujący Szczegółowe Przepisy Dotyczącye Systemu Certification Podmiotów Odmitów Odymnych Zatrzynie Zatrzynie Pojazdów According to the European Parliament Iue (2016/79 Ochącha Rozporządzenie 4 (in Polish). V. Prowadzone's progress on the § 25 Regulaminu § 25 Regulaminu Udzielnia Zamówień. Accessed to the Executives on the website Https:/koleje-wielkopolskie.com.pl/. With Uwagi Na Wpływać In the premiotment of Mają Za adapted the General Warunki Dostaw Kolei Wielkopolski Sp. Z O.o. Accessed on the Internet Web site Htps:/koleje-wielkopolskie.com. W Tym Przepisy § 3 Ust. 7 General Warunków Dostaw Kolei Wielkopolskich Sp. O.o. "Z Art. 13 Rodo" – It is located on the Eb2bbup web page. In the Department of Computer Science. "Wszelkie Pytania Dotyczące Postępowanie Prosimy Kiercieć Zajowej". As a result of the Techniographic aid, the user can use the Podmer Telefonu website Się W Stopce Na Dole website. Article 7 of the Act of the 13th Day of the 2022 R. O particularly Distributions of the W Zakresie Against the Chapter of the Agresji Na Ukraina O along with the National Security Protection Act. With Niego Progressing O Udzielnie Zajukenia Public Wyklucza Się Wykonawka: "Się Wykonawcy: I am admirer: I am not a member of the public order. 1) In the autumn of 18 Maja 2006 R. Dotyczący W Rozporządzenie Rady (we) No. 765/2006 z dnia 18 Maja 2006 R. Dotyczący Środków Ograniczy w Związek Z Sytuacja Na Biało (dz. In the Nature of the Environment, the Integration of Ukraine Lub Im Zaghorrych (dz. Urz. 78 Z.2014, Str. Zóźn 6: Zóźn; Daleja Rozporządzenie 269/2014) al Wbo written by Nago. "Mowa W Art. 1 Pkt 3 of the Sanction Act". 2) Któr Benefi's patient of the Act of the Day of 1 March 2018 R. Odział Praniu Pieniędzy Oraz Finansowanie Terrorism (U. z 2022 R. Poz. 593 I 655) is the Octonia Wymona Wachrelonych Wych Wace 765/22 / 269 I 655. O Ile was written on the List of Na Lista Na Porisie of the W Sprawie Wpisu Na Lista Rozsgatrzyowego O Za adaptanie Środka, Środka, Zaązeku Na Listie Wpisu Na Lista Rozsgażający "Mowa W Art. 1 Pkt 3 of the Sanction Act". 3) Którego Unit Dominujący W Rozumienie Art. 3 Ust. 1 Pkt 37 z dnia 29 Września 1994 R. O Rachunkności (dz. He is a member of the Order of the Octreślonych W Rozporządzenie 765/2006 I Rozporządzacji 269/2014 Albo Wpis na Lista Lubay Taka Uniting from 24 Lutego 2022 R. O Ile was inscribed on the letter Na of the decision of the W Sprawie Wpisu Na Lista Rozsgatrzygną O Za adapting Środka, Zaązeku Na Lista Rozsgażający "O Którym Mowa W Art. 1 Pkt 3". According to Art. 7 Ust. 6-7 of the Sanction Act of the Osoby Lub Podmioty Podmioty Podmioty Podmiło Wykluczowanie, Wykluczowanie, Z. The following Administrative Resolution, Będa Podlegć Karze Pieniężny Do Wysokości 200,000 Zł. Kara Pieniężna Nakładana will be made by the President of the Public Museums of the Administrative Revolution. The period of the Restoration of the Się does not precede Nizh Po Upływie 14 Dni Od dnia Wejścia Wejścia W Życie Sancyjny.

Details: (i) This Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested And A Written Solicitation Will Not Be Issued. (ii) This Solicitation Number Vs1145880 Is Being Issued As A, Request For Quotation (rfq) (iii) In Accordance With Federal Acquisition Regulation (far) Clause 52.252-2 (feb 1998) The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular. Applicable Far Clauses Are Incorporated By Reference And May Be Viewed On The Following Website (s) https://www.acquisition.gov/ https://www.acquisition.gov/agar (iv) This Requirement Is Being Issued As A Small Business Set Set-aside In Accordance With Federal Acquisition Regulation (far) 52.219-6 (nov 2020) . the North American Industrial Classification System Code(s) And Business Size Standard(s) Describing The Products And/or Services To Be Acquired Under This Solicitation Is Listed Below: naics 322211 -corrugated And Solid Fiber Box Manufacturing size Standard 1,250 Employees (v) Item Description - Firm Fixed Priced Order For Plain Chipboard (caliber .048) Containers And Plain Chipboard (caliber .040) Inner Partitions Used To Transport Blood Samples Per Specifications. All Cost To Include But Not Limit To: Overhead, General And Administrative, Profit, Insurance, And Transportation. Government Testing First Article Test Approval Required In Accordance With Federal Acquisition Regulation 52.209-4. line 001 - Item 0089 Blood Boxes With Lids In Accordance With Specs (quantity 70,000ea) line 002 - Item 0094 Inner Partitions In Accordance With Specs (quantity 70,000ea) (vi) Description Of Requirement: specifications a. Item 0089 Blood Box plain Chipboard (caliber .048) Container With Cover/lid. rigid Set-up Box two Piece Partial Telescope Set Up Box With Kraft Overwrap (caliber .004) On Each Half box Holds 40 Round Bottom Tubes (13 X 100 Mm) box Size: 6 3/8" L X 2 ½" W X 3 7 /8" H lid Size: 2 ¼" packed: 100 Boxes With Lids Per Master Carton b. Item 0094 Inner Partition plain Chipboard (caliber .040) 40-cell Assembled Partition Fits Securely In The Two Piece Box With Lid individual Slots For The 40 Round Bottom Tubes (13 X 100 Mm) partition Size: 6 5/16" L X 2 7 / 16" W X 3 ½" H packed: 100 Boxes Per Master Carton markings Of Unit And Inner Packages each Unit Of Material Procured For Shipment To And Stored At The Aphis-vs Logistics Support Center In Kansas City, Missouri Shall Be Individually Packaged And Marked. Unit Packages Of The Same Vs Stock Number May Then Be Packaged Together For The Ease Of Shipment Into Intermediate Shipping Containers. each Unit Package And Each Intermediate Package Shall Be Marked On The Top Side Of Box with The Following Information: 1. Complete Vs Stock Number 2. Item Description 3. Quantity In The Package And Unit Of Issue 5. Delivery Order Number 7. Lot Number markings Of Exterior Containers the Exterior Package Shall Be Marked With The Same Information As The Above Items 1 Through 8, Plus The Contractor's Name And Address, And The Gross Weight And Cube Of The Exterior Container Shall Be Indicated On The Container. all Markings Shall Be Legible And Are To Be Located Such That The Markings May Easily Be Read From A Distance Of Five (5) Feet When Stored On Shelves Or Stacked In The Warehouse. All Markings Shall Be Located So As Not To Be Destroyed When The Pack Is Opened For Inspection. Markings Shall Be Placed So As Not To Be Obscured By Strapping Or Closure Tape. boxes And Crates Under Ten (10) Cubic Feet, Exterior Markings Shall Be Applied To The Upper Left Two-thirds Of The Side Of The Container Having The Largest Marking Surface Area. The Address Label For Shipment Shall Be Applied On The Same Side Of The Container. If The Container Is Too Small To Accommodate The Address Label On The Identification Marking Side, It Shall Be Applied On The Opposite Side Of The Container. all Shipments Must Be Palletized Unless A Lesser Amount Is Ordered That Cannot Be Palletized. If A Shipment Is Palletized, The Pallet Size Must Be Standard, And The Maximum Height Shall Not Exceed 54" From The Floor To The Top Of The Stacked Cartons. Pallets Shall Be Shrink- Wrapped And Secure. Shipment Shall Be Palletized In Numerical Order. Markings Should Be Standardized As To Letter Type And Size. The Government Must Be Able To Read The Label Of Each Box To Verify Tag Sequence. Do Not Double Stack Pallets. packing Slip Documentation each Exterior Container Shall Be Individually Marked And Include A Packing Slip On The Outside, Which Identifies The Item Packaged. Each Packing Slip Must Be Clearly Legible And Include The Following Information. 1. Vs Stock Number 2. Item Description 3. Quantity Of The Units Of Issue In The Intermediate Package 4. Delivery Or Purchase Order Number 5. Date Of Manufacture 8. Lot Number 9. Hazardous Material Identification 10. Package Number And Total Number Of Packages (ex: L Of 5, 2 Of 5, 3 Of 5, Etc.) packing Slip Shall Be Securely Attached To The End Or Side Of The Container And Sealed In A Waterproof Container. They Shall Be Secured To The Exterior Of The Palletized Load Or Containers In The Most Protected Location. Each Item Above Must Be Shipped On Their Own Pallet. The Pallet Height Should Not Exceed 54 Inches. durability all Exterior Boxes Shall Be Constructed To Withstand Shipment To The Vs Logistics Support Center, Then Shipments From The Logistics Support Center To The End Users. Containers Shall Meet Federal Express {http://images.fedex.com/us/services/pdf /packaging/grlpkgguidelines Fxcom.pdf) And United Parcel Service (http://www.ups.com/content/us/en/resources/ship/packaging/guidelines.html) Shipping Requirements. Boxes Shall Be Sealed In Two Directions {length/girth) With Some Type Of Reinforced Tape And/or Staples. (vii) Shipment Will Be Fob Destination And Inspection And Acceptance Is In Accordance With Far Clause 52.212-4(a) usda-aphis-vs 3500 E 149th St suite 300 kansas City Mo 64147 invoice Processing And Payment. net 15dys Aro in Accordance With Omb Dated 06/07/2012 Accelerating Payments To Small Businesses For Goods And Services usda Uses The Invoice Processing Platform (ipp) For Electronic Submission And Tracking Of Purchase Orders, Invoices, And Payment Information To Its Suppliers Of Goods And Services: Enroll At Https://ipp.gov. The Ipp Is A Government-wide Secure Web-based Invoice Processing Service Offered Free Of Charge To Government Agencies And Their Suppliers By The U.s. Department Of Treasury’s Financial Management Service (fms). upon Contract Award, You Will Receive A Notification Of Your One-time Enrollment Requirement In An Automatic Invoice Payment Notification System Available Through Ipp. This One-time Enrollment In Ipp Means That You Will Receive A Series Of E-mails From Treasury Services. contractors Must Submit Invoices And Attach All Supporting Documentation As Required Within 5 Business Days Of Completion Of Services Provided. Supporting Documentation Include ,for Example; Maintenance Inspection Checklist, Timecard For Labor, Travel Receipts Etc.. The Cotr Will Review The Supporting Documents Before Approving Invoices In Ipp, If Supporting Documentation Is Not Provided The Invoice Will Be Rejected. Ipp Will Issue A Notification To Contractor That They Must Submit Supporting Documentation And Resubmit The Invoice. please See https://www.ipp.gov/vendors/enrollment-vendors.htm and Submit Invoices Through The Invoice Processing Platform (ipp) Enroll At Https://www.ipp.gov/ Ipp Is A Secure, Web-based System That Manages Government Invoicing. (viii) 52.212‐1 Instructions To Offerors – Commercial Items, Is Replaced In Its Entirety See Attachment_1. (ix) Evaluation: evaluation Of Quotes Will Be In Accordance With Federal Acquisition Regulation ( Far) 13.106-1 (2) And (far) 13.106-2(b)(3) in Accordance With Federal Acquisition ( Far) 13.106-1 (2) The Government Will Award A Purchase Order Resulting From This Solicitation To The Responsible Quote Conforming To The Solicitation That Will Be The “best Value” And Most Advantageous To The Government. In Accordance With Far 13.106-2 (b)(3); First Article Test Results, Price, And Delivery Are The Factors To Be Considered. first Article Test Evaluation Is Based On Specifications And Durability Of Product. see Attachment_1 For First Article Test Instructions (x) Provision At 52.212-3 (may 2024) Representations And Certifications—commercial Items Applies To This Solicitation And Is To Be Completed Online At Www.sam.gov (xi) The Clause At 52.212-4 (nov 2023) Contract Terms And Conditions—commercial Items, Applies To This Acquisition. (xii) The Clause At 52.212-5 (jan 2025) Contract Terms And Conditions Required To Implement Statutes Or Executive Orders—commercial Items, Applies To This Acquisition. 52.212-5contract Terms And Conditions Required To Implement Statutes Or Executive Orders—commercial Products And Commercial Services. (jan 2025) (a)the Contractorshallcomply With The Following Federalacquisitionregulation (far) Clauses, Which Are Incorporated In This Contract By Reference, To Implement Provisions Of Law Or Executive Orders Applicable Toacquisitionsofcommercial Productsandcommercial Services: (1)52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements(jan 2017)(section 743 Of Division E, Title Vii, Of The Consolidated And Further Continuing Appropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriations Acts (and As Extended In Continuing Resolutions)). (2)52.204-23, Prohibition Oncontractingfor Hardware, Software, And Services Developed Or Provided By Kaspersky Lab Covered Entities(dec 2023)(section 1634 Of Pub. L. 115-91). (3)52.204-25, Prohibition Oncontractingfor Certain Telecommunications And Video Surveillance Services Or Equipment.(nov 2021)(section 889(a)(1)(a) Of Pub. L. 115-232). (4)52.209-10, Prohibition Oncontractingwith Inverted Domestic Corporations(nov 2015). (5)52.232-40, Providing Accelerated Payments Tosmall Business Subcontractors(mar 2023)(31 U.s.c. 3903and10 U.s.c. 3801). (6)52.233-3, Protest After Award(aug 1996)(31u.s.c.3553). (7)52.233-4, Applicable Law For Breach Of Contractclaim(oct 2004)(public Laws 108-77 And 108-78 ( 19u.s.c.3805note)). (b)the Contractorshallcomply With The Far Clauses In This Paragraph (b) That Thecontracting Officerhas Indicated As Being Incorporated In This Contract By Reference To Implement Provisions Of Law Or Executive Orders Applicable Toacquisitionsofcommercial Productsandcommercial Services: [contracting Officercheck As Appropriate.] __(1)52.203-6, Restrictions On Subcontractor Sales To The Government(jun 2020),withalternatei(nov 2021)(41u.s.c.4704 And10 U.s.c. 4655). __(2)52.203-13, Contractor Code Of Business Ethics And Conduct(nov 2021)(41u.s.c.3509)). __(3)52.203-15, Whistleblower Protections Under The American Recovery And Reinvestment Act Of 2009(jun 2010)(section 1553 Of Pub. L. 111-5). (applies To Contracts Funded By The American Recovery And Reinvestment Act Of 2009.) __(4)52.203-17, Contractor Employee Whistleblower Rights(nov 2023)(41 U.s.c. 4712); This Clause Does Not Apply To Contracts Of Dod, Nasa, The Coast Guard, Or Applicable Elements Of The Intelligence Community—see Far3.900(a). x(5)52.204-10, Reporting Executive Compensation And First-tier Subcontract Awards(jun 2020)(pub. L. 109-282) (31u.s.c.6101note). __(6)[reserved]. __(7)52.204-14, Service Contract Reporting Requirements(oct 2016)(pub. L. 111-117, Section 743 Of Div. C). __(8)52.204-15, Service Contract Reporting Requirements For Indefinite-delivery Contracts(oct 2016)(pub. L. 111-117, Section 743 Of Div. C). __(9)52.204-27, Prohibition On A Bytedance Covered Application(jun 2023)(section 102 Of Division R Of Pub. L. 117-328). __(10)52.204-28, Federalacquisitionsupply Chain Security Act Orders—federal Supply Schedules, Governmentwideacquisitioncontracts, And Multi-agency Contracts.(dec 2023)(pub. L. 115–390, Title Ii). __(11) (i)52.204-30, Federalacquisitionsupply Chain Security Act Orders—prohibition.(dec 2023)(pub. L. 115–390, Title Ii). __(ii)alternatei(dec 2023)of52.204-30. x(12)52.209-6, Protecting The Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed Fordebarment, Or Voluntarily Excluded. (jan2025) (31u.s.c.6101note). __(13)52.209-9, Updates Of Publicly Available Information Regarding Responsibility Matters(oct 2018)(41u.s.c.2313). __(14)[reserved]. __(15)52.219-3, Notice Ofhubzoneset-aside Or Sole-source Award (oct 2022) (15u.s.c.657a). __(16)52.219-4, Notice Of Price Evaluation Preference Forhubzonesmall Business Concerns (oct 2022) (if Theofferorelects To Waive The Preference, Itshallso Indicate In Itsoffer) (15u.s.c.657a). __(17)[reserved] x(18)(i)52.219-6, Notice Of Total Small Business Set-aside(nov 2020)(15u.s.c.644). __(ii)alternatei(mar 2020)of52.219-6. __(19)(i)52.219-7, Notice Of Partial Small Business Set-aside(nov 2020)(15u.s.c.644). __(ii)alternatei(mar 2020)of52.219-7. (20)52.219-8, Utilization Of Small Business Concerns(jan 2025)(15u.s.c.637(d)(2) And (3)). __(21)(i)52.219-9, Small Business Subcontracting Plan(jan 2025)(15u.s.c.637(d)(4)). __(ii)alternatei(nov 2016)of52.219-9. __(iii)alternateii(nov 2016)of52.219-9. __(iv)alternateiii(jun 2020)of52.219-9. __(v)alternateiv(jan 2025)of52.219-9. __(22) (i)52.219-13, Notice Of Set-aside Of Orders(mar 2020)(15u.s.c.644(r)). __(ii)alternatei(mar 2020)of52.219-13. __(23)52.219-14, Limitations On Subcontracting (oct 2022) (15u.s.c.657s). __(24)52.219-16, Liquidated Damages—subcontracting Plan(sep 2021)(15u.s.c.637(d)(4)(f)(i)). __(25)52.219-27, Notice Of Set-aside For, Or Sole-source Award To, Service-disabled Veteran-owned Small Business (sdvosb) Concerns Eligible Under The Sdvosb Program (feb 2024) (15u.s.c.657f). x(26)(i)52.219-28,postawardsmall Business Program Rerepresentation(jan 2025)(15u.s.c.632(a)(2)). __(ii)alternatei(mar 2020)of52.219-28. __(27)52.219-29, Notice Of Set-aside For, Or Sole-source Award To, Economically Disadvantagedwomen-owned Small Business Concerns(oct 2022) (15u.s.c.637(m)). __(28)52.219-30, Notice Of Set-aside For, Or Sole-source Award To, Women-owned Small Business Concerns Eligible Under The Women-owned Small Business Program (oct 2022) (15u.s.c.637(m)). __(29)52.219-32, Orders Issued Directly Under Small Business Reserves(mar 2020)(15u.s.c.644(r)). __(30)52.219-33, Nonmanufacturer Rule(sep 2021)(15 U.s.c. 637(a)(17)). x(31)52.222-3, Convict Labor(jun 2003)(e.o.11755). x(32)52.222-19, Child Labor—cooperation With Authorities And Remedies(jan 2025)(e.o. 13126). x(33)52.222-21, Prohibition Of Segregated Facilities(apr 2015). x(34)(i)52.222-26, Equal Opportunity(sep 2016)(e.o.11246). __(ii)alternatei(feb 1999)of52.222-26. (35)(i)52.222-35, Equal Opportunity For Veterans(jun 2020)(38u.s.c.4212). __(ii)alternatei(jul 2014)of52.222-35. x(36)(i)52.222-36, Equal Opportunity For Workers With Disabilities(jun 2020)(29u.s.c.793). __(ii)alternatei(jul 2014)of52.222-36. x(37)52.222-37, Employment Reports On Veterans (jun 2020) (38u.s.c.4212). __(38)52.222-40, Notification Of Employee Rights Under The National Labor Relations Act(dec 2010)(e.o. 13496). x(39)(i)52.222-50, Combating Trafficking In Persons(nov 2021)(22u.s.c.chapter78 And E.o. 13627). __(ii)alternatei(mar 2015)of52.222-50(22u.s.c.chapter78 And E.o. 13627). __(40)52.222-54, Employment Eligibility Verification(jan 2025)(executive Order 12989). (not Applicable To Theacquisitionof Commercially Available Off-the-shelf Items Or Certain Other Types Ofcommercial Productsorcommercial Servicesas Prescribed In Far22.1803.) __(41)(i)52.223-9, Estimate Of Percentage Ofrecovered Materialcontent For Epa–designated Items (may2008) ( 42u.s.c.6962(c)(3)(a)(ii)). (not Applicable To Theacquisitionof Commercially Available Off-the-shelf Items.) __(ii)alternatei(may2008)of52.223-9(42u.s.c.6962(i)(2)(c)). (not Applicable To Theacquisitionof Commercially Available Off-the-shelf Items.) __(42)52.223-11, Ozone-depleting Substances And High Global Warming Potential Hydrofluorocarbons(may2024)(42 U.s.c. 7671,et Seq.). __(43)52.223-12, Maintenance, Service, Repair, Or Disposal Of Refrigeration Equipment And Air Conditioners(may2024)(42 U.s.c. 7671,et Seq.). __(44)52.223-20, Aerosols(may2024)(42 U.s.c. 7671,et Seq.). __(45)52.223-21, Foams(may2024)(42 U.s.c. 7671,et Seq.). __(46)52.223-23,sustainable Products And Services(may2024)(e.o. 14057,7 U.s.c. 8102,42 U.s.c. 6962,42 U.s.c. 8259b, And42 U.s.c. 7671l). __(47)(i)52.224-3privacy Training(jan 2017)(5 U.s.c. 552a). __(ii)alternatei(jan 2017)of52.224-3. x(48)(i)52.225-1, Buy American-supplies(oct 2022)(41u.s.c.chapter83). __(ii)alternatei(oct 2022)of52.225-1. __(49)(i)52.225-3, Buy American-free Trade Agreements-israeli Trade Act(nov 2023)(19 U.s.c. 3301 Note,19 U.s.c. 2112 Note,19 U.s.c. 3805 Note,19 U.s.c. 4001 Note,19 U.s.c. Chapter 29(sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, And 112-43. __(ii)alternatei [reserved]. __(iii)alternateii(jan 2025)of52.225-3. __(iv)alternateiii(feb 2024)of52.225-3. __(v)alternateiv (oct 2022) Of52.225-3. (50)52.225-5, Trade Agreements(nov 2023)(19u.s.c.2501,et Seq.,19u.s.c.3301note). x(51)52.225-13, Restrictions On Certain Foreign Purchases(feb 2021)(e.o.’s, Proclamations, And Statutes Administered By The Office Of Foreign Assets Control Of The Department Of The Treasury). __(52)52.225-26, Contractors Performing Private Security Functions Outside Theunited States(oct 2016) (section 862, As Amended, Of Thenational Defenseauthorization Act For Fiscal Year 2008; 10 U.s.c. Subtitle A, Part V, Subpart G Note). __(53)52.226-4, Notice Of Disaster Oremergencyarea Set-aside (nov 2007) (42u.s.c.5150). __(54)52.226-5, Restrictions On Subcontracting Outside Disaster Oremergencyarea(nov 2007)(42u.s.c.5150). x(55)52.226-8, Encouraging Contractor Policies To Ban Text Messaging While Driving(may2024)(e.o. 13513). __(56)52.229-12, Tax On Certain Foreignprocurements(feb 2021). __(57)52.232-29, Terms For Financing Of Purchases Ofcommercial Productsandcommercial Services(nov 2021)(41u.s.c.4505,10 U.s.c. 3805). (58)52.232-30, Installment Payments Forcommercial Productsandcommercial Services(nov 2021)(41u.s.c.4505,10 U.s.c. 3805). x(59)52.232-33, Payment Byelectronic Funds Transfer-system For Award Management(oct2018)(31u.s.c.3332). (60)52.232-34, Payment Byelectronic Funds Transfer-other Thansystem For Award Management(jul 2013) (31u.s.c.3332). (61)52.232-36, Payment By Third Party(may2014)(31u.s.c.3332). __(62)52.239-1, Privacy Or Security Safeguards(aug 1996)(5u.s.c.552a). __(63)52.240-1, Prohibition On Unmanned Aircraft Systems Manufactured Or Assembled By American Security Drone Act-covered Foreign Entities(nov 2024)(sections 1821-1826, Pub. L. 118-31,41 U.s.c. 3901note Prec.). __(64)52.242-5, Payments Tosmall Business Subcontractors(jan 2017)(15u.s.c.637(d)(13)). __(65)(i)52.247-64, Preference For Privately Owned U.s.-flag Commercial Vessels(nov 2021)(46 U.s.c. 55305and 10u.s.c.2631). __(ii)alternatei(apr 2003)of52.247-64. __(iii)alternateii(nov 2021)of52.247-64. (c)the Contractorshallcomply With The Far Clauses In This Paragraph (c), Applicable Tocommercial Services, That Thecontracting Officerhas Indicated As Being Incorporated In This Contract By Reference To Implement Provisions Of Law Or Executive Orders Applicable Toacquisitionsofcommercial Productsandcommercial Services: [contracting Officercheck As Appropriate.] (1)52.222-41, Service Contract Labor Standards(aug 2018)(41u.s.c.chapter67). (2)52.222-42, Statement Of Equivalent Rates For Federal Hires(may2014)(29u.s.c.206 And 41u.s.c.chapter67). (3)52.222-43, Fair Labor Standards Act And Service Contract Labor Standards-price Adjustment (multiple Year Andoptioncontracts)(aug 2018)(29u.s.c.206 And 41u.s.c.chapter67). (4)52.222-44, Fair Labor Standards Act And Service Contract Labor Standards-price Adjustment (may2014) (29u.s.c.206and 41u.s.c.chapter67). __(5)52.222-51, Exemption From Application Of The Service Contract Labor Standards To Contracts For Maintenance, Calibration, Or Repair Of Certain Equipment-requirements (may2014) (41u.s.c.chapter67). __(6)52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services-requirements(may2014)(41u.s.c.chapter67). (7)52.222-55, Minimum Wages For Contractor Workers Under Executive Order 14026(jan 2022). (8)52.222-62, Paid Sick Leave Under Executive Order 13706(jan 2022)(e.o. 13706). __(9)52.226-6, Promoting Excess Food Donation To Nonprofit Organizations (jun 2020) (42u.s.c.1792). __(10)52.247-69, Reporting Requirement For U.s.-flag Air Carriers Regarding Training To Prevent Human Trafficking(jan 2025)(49 U.s.c. 40118(g)). (d)comptroller General Examination Of Record. The Contractorshallcomply With The Provisions Of This Paragraph (d) If This Contract Was Awarded Using Other Than Sealed Bid, Is In Excess Of Thesimplified Acquisition Threshold, As Defined In Far2.101, On The Date Of Award Of This Contract, And Does Not Contain The Clause At52.215-2, Audit And Records-negotiation. (1)the Comptroller General Of Theunited States, Or An Authorized Representative Of The Comptroller General,shallhave Access To And Right To Examine Any Of The Contractor’s Directly Pertinent Records Involving Transactions Related To This Contract. (2)the Contractorshallmake Available At Its Offices At All Reasonable Times The Records, Materials, And Other Evidence For Examination, Audit, Or Reproduction, Until 3 Years After Final Payment Under This Contract Or For Any Shorter Period Specified In Far Subpart4.7, Contractor Records Retention, Of The Other Clauses Of This Contract. If This Contract Is Completely Or Partially Terminated, The Records Relating To The Work Terminatedshallbe Made Available For 3 Years After Any Resulting Final Termination Settlement. Records Relating To Appeals Under The Disputes Clause Or To Litigation Or The Settlement Ofclaimsarising Under Or Relating To This Contractshallbe Made Available Until Such Appeals, Litigation, Orclaimsare Finally Resolved. (3)as Used In This Clause, Records Include Books, Documents, Accounting Procedures And Practices, And Other Data, Regardless Of Type And Regardless Of Form. This Does Not Require The Contractor To Create Or Maintain Any Record That The Contractor Does Not Maintain In The Ordinary Course Of Business Or Pursuant To A Provision Of Law. (e) (1)notwithstanding The Requirements Of The Clauses In Paragraphs (a), (b), (c), And (d) Of This Clause, The Contractor Is Not Required To Flow Down Any Far Clause, Other Than Those In This Paragraph (e)(1), In A Subcontract Forcommercial Productsor Commercial Services. Unless Otherwise Indicated Below, The Extent Of The Flow Downshallbe As Required By The Clause- (i)52.203-13, Contractor Code Of Business Ethics And Conduct(nov 2021)(41u.s.c.3509). (ii)52.203-17, Contractor Employee Whistleblower Rights(nov 2023)(41 U.s.c. 4712). (iii)52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements (jan 2017) (section 743 Of Division E, Title Vii, Of The Consolidated And Further Continuing Appropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriations Acts (and As Extended In Continuing Resolutions)). (iv)52.204-23, Prohibition Oncontractingfor Hardware, Software, And Services Developed Or Provided By Kaspersky Lab Covered Entities(dec 2023)(section 1634 Of Pub. L. 115-91). (v)52.204-25, Prohibition Oncontractingfor Certain Telecommunications And Video Surveillance Services Or Equipment.(nov 2021)(section 889(a)(1)(a) Of Pub. L. 115-232). (vi)52.204-27, Prohibition On A Bytedance Covered Application(jun 2023)(section 102 Of Division R Of Pub. L. 117-328). (vii)(a)52.204–30, Federalacquisitionsupply Chain Security Act Orders—prohibition.(dec 2023)(pub. L. 115–390, Title Ii). (b)alternatei(dec 2023)of 52.204–30. (viii)52.219-8, Utilization Of Small Business Concerns(jan 2025)(15u.s.c.637(d)(2)and (3)), In All Subcontracts Thatofferfurther Subcontracting Opportunities. If The Subcontract (except Subcontracts To Small Business Concerns) Exceeds The Applicable Threshold Specified In Far19.702(a) On The Date Of Subcontract Award, The Subcontractormustinclude52.219-8in Lower Tier Subcontracts Thatoffersubcontracting Opportunities. (ix)52.222-21, Prohibition Of Segregated Facilities(apr 2015). (x)52.222-26, Equal Opportunity(sep 2016)(e.o.11246). (xi)52.222-35, Equal Opportunity For Veterans(jun 2020)(38u.s.c.4212). (xii)52.222-36, Equal Opportunity For Workers With Disabilities(jun 2020)(29u.s.c.793). (xiii)52.222-37, Employment Reports On Veterans(jun 2020)(38u.s.c.4212). (xiv)52.222-40, Notification Of Employee Rights Under The National Labor Relations Act(dec 2010)(e.o. 13496). Flow Down Required In Accordance With Paragraph (f) Of Far Clause52.222-40. (xv)52.222-41, Service Contract Labor Standards(aug 2018)(41u.s.c.chapter67). (xvi)(a)52.222-50, Combating Trafficking In Persons(nov 2021)(22u.s.c.chapter78 And E.o 13627). (b)alternatei(mar 2015)of52.222-50(22u.s.c.chapter78ande.o.13627). (xvii)52.222-51, Exemption From Application Of The Service Contract Labor Standards To Contracts For Maintenance, Calibration, Or Repair Of Certain Equipment-requirements (may2014) (41u.s.c.chapter67). (xviii)52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services-requirements(may2014)(41u.s.c.chapter67). (xix)52.222-54, Employment Eligibility Verification(jan 2025)(e.o. 12989). (xx)52.222-55, Minimum Wages For Contractor Workers Under Executive Order 14026(jan 2022). (xxi)52.222-62, Paid Sick Leave Under Executive Order 13706(jan 2022)(e.o. 13706). (xxii)(a)52.224-3, Privacy Training (jan 2017) (5u.s.c.552a). (b)alternatei(jan 2017)of52.224-3. (xxiii)52.225-26, Contractors Performing Private Security Functions Outside Theunited States(oct 2016)(section 862, As Amended, Of Thenational Defenseauthorization Act For Fiscal Year 2008; 10 U.s.c. Subtitle A, Part V, Subpart G Note). (xxiv)52.226-6, Promoting Excess Food Donation To Nonprofit Organizations(jun 2020)(42u.s.c.1792). Flow Down Required In Accordance With Paragraph (e) Of Far Clause52.226-6. (xxv)52.232-40, Providing Accelerated Payments Tosmall Business Subcontractors(mar 2023) (31 U.s.c. 3903and10 U.s.c. 3801). Flow Down Required In Accordance With Paragraph (c) Of52.232-40. (xxvi)52.240-1, Prohibition On Unmanned Aircraft Systems Manufactured Or Assembled By American Security Drone Act-covered Foreign Entities(nov 2024)(sections 1821-1826, Pub. L. 118-31,41 U.s.c. 3901note Prec.). (xxvii)52.247-64, Preference For Privately Owned U.s.-flag Commercial Vessels(nov 2021)(46 U.s.c. 55305and 10u.s.c.2631). Flow Down Required In Accordance With Paragraph (d) Of Far Clause52.247-64. (2)while Not Required, The Contractormayinclude In Its Subcontracts Forcommercial Productsandcommercial Servicesa Minimal Number Of Additional Clauses Necessary To Satisfy Its Contractual Obligations. (end Of Clause) the Following Far Clauses And Provisions Also Apply To This Acquisition 52.252-2clauses Incorporated By Reference. (feb 1998) 52.204-13, System For Award Management Maintenance (oct 2018) 2.204-18 Commercial And Government Entity Code Maintenance. (aug 2020) 52.204-21 Basic Safeguarding Of Covered Contractor Information Systems. (nov 2021) 52.212-4 Contract Terms And Conditions—commercial Items. (nov 2023) 52.232-40 Providing Accelerated Payments To Small Business Subcontractors. (mar 2023) 52.247-34 F.o.b. Destination. (nov 1991) 52.204–28 - Federal Acquisition Supply Chain Security Act Orders—federal Supply Schedules, Governmentwide Acquisition Contracts, And Multi-agency Contracts. (dec 2023) 52.204–30 - Federal Acquisition Supply Chain Security Act Orders—prohibition. (dec 2023) 452.204-70 Modification For Contract Closeout. 52.252-1 Solicitation Provisions Incorporated By Reference. (feb 1998) 52.204-7 System For Award Management(nov 2024) 52.204-16 Commercial And Government Entity Code Reporting. (aug 2020) 52.225-25 Prohibition On Contracting With Entities Engaging In Certain Activities Or Transactions Relating To Iran—representation And Certifications. (jun 2020) 52.212-3 Offeror Representations And Certifications—commercial Items. (may 2024) 52.204–29 Federal Acquisition Supply Chain Security Act Orders—representation And Disclosures. (dec 2023) (xiii) Additional Contract Requirements Or Warranty warranty implied Warranty - The Government’s Post Award Rights Contained In 52.212-4 Are The Implied Warranty Of Merchantability, The Implied Warranty Of Fitness For Particular Purpose And The Remedies Contained In The Acceptance Paragraph. additional Warranty - : Explain All Details Of The Warranty. If An Extended Warranty Is Available Explain Details Of Extended Warranty Including Price And Availability After Initial Warranty Expires. The Quoter Shall Extend To The Government The Full Coverage Of Any Standard Commercial Warranty Normally Quoted In A Similar Commercial Sale, Provided Such Warranty Is Available At No Additional Cost To The Government. Acceptance Of The Standard Commercial Warranty Does Not Waive The Government's Rights Under The Inspection Clause Nor Does It Limit The Government's Right With Regard To The Other Terms And Conditions Of This Contract. In The Event Of A Conflict, The Terms And Conditions Of The Contract Shall Take Precedence Over The Standard Commercial Warranty. The Contractor Shall Provide A Copy Of Its Standard Commercial Warranty (if Applicable) With This Response. (xiv) There Is No Defense Priority Allocation For This Requirement. (xv) The Date, Time And Place Quotes Are Due: 02/28/2025 please Return This Attachment_1 Via Email Only On Or Before Notice Due Date To Contracting Officer Carol Dingess At Carol.dingess@usda.gov. **please Use Reference Number Vs1145880 On Subject Line When Responding** No Postal Mail Or Faxes Please. first Article Test Samples Are Due No Later Than Notice Due Date Of 2/28/2025 questions Are Due No Later Than 8am 02/17/2025 (xvi) The Name And Telephone Number Of The Individual To Contact For Information Regarding This Rfq Is The Same As Item (xv)

Details: Prosecution Ofert. The Municipal Committee of Sp. Z O.o. W Tychach Przy Ul. Towarowej 1, 43-100 Tychy Zaprasza Do Zlement Oferty W Postępowanie O Udzielenie Zadzielenie Zawadenie Zawadenie Zawadenie Zawię Publicznego Wią Wią Komunikacji Miejskiej Spunikacji Zunikacji Oudzielenie Zadzielenie Zadzielenie Zadzielenie Zadzielenie Zawórów. 1. Zawarto W Załączniku Nr 1 Do Niego Zapytania Ofertowej. 2. Termination of the Order: Od 01.2023. R do 31.12.2023r. 3. Place of Realization: Teren Miasta Tychy Lub W Najbliżej Odległości (do 25 Km) 4. The Umowy is the Załącznik No. 3 5. The interior of the Oferta is to be placed in the Golden Forest of Poland (pln) with the exactness of Do Twoch Miejsc Po Przecinku. In total, Cena Oferty Musi Obe took over the whole Zakres Zajdanie, Określon W Zapytanie Ofertowy. In Cenie Tej, the Uwzględnić soże other Koszty O Ile Wykonaciel Je Przewiduje (e.g. the cost of Doang, Opłata, Ubezpieczenie Itp). 6. It belongs to the Polish language; all the Orders called Będa W Pln. 7. Winna Być Podpisana przez Osoby Upoważnione Do consists of the experiences of Woli W Imlenia Wykonawcy. In the Postaci Electroniczny, Kwalifikowany Podpisem Electronical Lub W Kopii Podwrota Odręcznie Documentu. 8. The Cenowa Wg Załącznik Nr 2 belongs to W Terminie Do Day 12.2022r. "Htps:///pkmtych". 9. Oceny Ofert: 100%. 10. Wadium (also Dotaczy Nie Dotyczyczyczyczyczyczyczy Nie Dotyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyne Wadium). 11. It is not a safeguard to the Umowy. 12. Warunki Płatności: 21 Dni Od Daty Prawidlovo Wystawionej Faktury Vat Za discussing the future. 13. All the Dokonys called Będa W Pln. 14. "Gwarancja I Rękojmia Nie Dotyczyczyczyczyczyczyczyczyna Gwarancja I Rękojmia Nie Dotyczyczyczyczyczyczyczyzna Nie Dotyczyczyczyczyczyczyczyczyczyczyczyczyczyczyna Gwarancja I Rękojmia Nie kojmia Nie Dotyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyzna Nie Dotyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyczyna Nie . 15: Exquerane Warunki Udziału W Postępowanie (Dotyczy Nie Dotyczyczyczyczyczyczy Nie Dotyczyczyczycz Nie Dotyczyczyczy Nie Dotyczyczyczyczy Nie Dotyczyczyczyczycz Nie Dotyczyczyczyczyczycz. 16. With the exception of the document: ". A) a. The full-power of the Ustanowione Do Represents the Confawcy/U runs/Snia O Udzielenie Zajenia, If Uprawnienienie Do Krajnik To Z Innych Dołączych Documentów; and the resolution of the Public Assembly If Uprawnienienienienienienienienienienienienienienienienienie Do Team of the Non-Donika To Z Innych Dołączed Documents; and Documents. B) Rejective Rejestru Lub Z Central Information I Information of Economic Action, If the Rescriptions of Do Rejestru Lub Ewidencja, W Celukonawcy - Nie previously 6 Miesięcy Prior to the Terminu Ząstru Lub Ewidencji. In the wake of the Ww. document, Zamawiać Pobierze Go Z, an online website: Ww. htps://ems.ms.gov.pl/krs/wyszukiowanie podmiotu Lub Htps:/prod.ceidg.gov.pl. 17: Termin Związek Oferta: 30 Dni Od Daty consists of Ofert *. 18. Additional information: 1) "Eyta Smuda E-mail Esmuda@pkmtychy.pl I Mariusz Jaworski Mjaworski@pkmtychy". 2) The Dopuszcza Responsions of the Negocjacja Zkonawkami, Którzy Zerty. 3) Musi Być Zrealized Oneorazowo/dopuszcza Się Realiz W Partach, according to Z Harmonogram Przekazany przez Zamawiający. *** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 19th-century Computer Science Principles of Danch Osobowe I Polityka Prywatności are available Na Wwww.pkmtychy.pl. "W Zakładce Rodo".

Details: The Subject of the Public Contract is the Construction of the "Sewage Drainage of the Municipality of Samotišky" Related to the Project of the Contracting Authority with the Title "Sewage Drainage of the Municipality of Samotišky", Project Registration Number 1240700027 Within the Framework of the Subsidy Title Financed from the National Environment Program. In the Municipality of Samotišky, it is proposed to build a new sewage gravity sewer system terminated by the Samotišky pumping station, which will transport wastewater by pressure to the sewer network of the City of Olomouc - to the collector "k" leading in the extravilán of the local part of Droždín, which drains wastewater towards the local part of Olomouc Chválkovic. The sewage wastewater of the Municipality of Samotišky will be treated at the Olomouc sewage treatment plant. Technical and Technological Description of the Individual Parts of the Subject of the Public Contract, Including the Project Documentation and the Bill of Quantities, Which Forms an Annex to the Tender Documentation. The Contractor undertakes to carry out the work in accordance with the Tender Conditions and the Project Documentation. All Requirements for the Contractor arising from the Project Documentation are binding on the Contractor and must be included in the Supplier's Offer. Completion of the Work means the complete, functional and flawless execution of all construction and assembly works and structures, including the supply of necessary materials and equipment necessary for the proper completion of the work, as well as the performance of all activities related to the supply of construction works and structures, the performance of which is necessary for the proper completion of the work, including the coordination and completion activities of the entire construction. The Work Will Be Implemented In Accordance With The Applicable Laws Of The Czech Republic And The Czech Republic And According To Generally Binding And Recommended Regulations And Methodologies. The Client Emphasizes That The Contractor Of The Work Must Comply With All Technical And Technological Procedures Within The Implementation Of Individual Works Under The Order. The Basis For The Preparation Of The Offer Is The Project Documentation For The Implementation Of The Construction Of The "Sewage Treatment Of The Municipality Of Samotišky" Prepared By The Contractor - The Association Of Companies Aqp+vodis, Formed By The Company Aqua Procon Sro, Registered Office Palackého 12, 612 00 Brno, Company No.: 46964371 And The Company Vodis Olomouc Sro, Registered Office Tovární 1059/41, 772 11 Olomouc, Company No.: 25835815, In 05/2023 And Further See Project Documentation (hereinafter referred to as the "Project Documentation"). All features, procedures, requirements and specifications are stated in the draft contract for the work, which is annex no. 3 to this tender documentation and in the project documentation, which, together with the statement of quantities, is annex no. 4 to this tender documentation. The contracting authority expressly mentions the need to carry out the work in accordance with the document Methodology for the DNSH principle. This methodology has application priority over the project documentation, i.e. in the event of a conflict regarding the method of carrying out the work, the procedure according to the document Methodology for the DNSH principle will be preferred, or the work will be carried out in such a way that this methodology for the DNSH principle is observed. The contractor also undertakes to properly document compliance with this methodology as required by the subsidy provider. Both the Methodology for the DNSH Principle and the Requirements for Its Reporting Are Part of the Project Documentation, or Are Available in Their Current Form on the Website of the Subsidy Provider at Https://www.mzp.cz/cz/podminky_cerpani_eu_fondu Technical Supervision for This Contract May Not Be Performed by the Supplier or a Person Connected to It. If the Terms of Reference, Technical Specifications, Project Documentation or Statement of Quantities Refers to Certain Suppliers, Products or Patents for Inventions, Utility Models, Industrial Designs, Trademarks or Designations of Origin, Pursuant to the Provisions of Section 89, Paragraph 6 of Act No. 134/2016 Coll., On the Award of Public Contracts, Considers Such a Reference to be a Specification of Technical Conditions Which Would Not Be Sufficiently Precise and Comprehensible Without Its Use. The Contracting Authority Explicitly States and Admits the Possibility of Offering Another Equivalent Solution for Each Such Reference.