Website Tenders

Website Tenders

National Road and Highway Directorate Tender

Others
Corrigendum : Closing Date Modified
Poland
Details: I. Subject of the Proceedings: 1. Description of the Subject of the Order: - Hexagon Bolt Din 933 M10x35 Oc Kl.8.8 Do 48wee - 288 pcs. The Assortment Must Meet The Following Requirements: Be New And Free From Defects, Original, Not Encumbered With Third Party Rights, 3. Accompanying Documentation: None 4. Offer Evaluation Criterion: Price 99%, 1% Completion Time Ii. Terms of Order Execution: 1. Execution Date - Order Execution Date Expected by the Ordering Party 7 Business Days. The Ordering Party indicates that it allows the submission of Tenders with a deadline longer than 7 Business Days. - The unit "days" defined in the Criterion of the Execution Date should be understood as Working Days - Execution Hours - 8:00 am to 2:00 pm 2. Rules for the Delivery and Unloading of Goods - In accordance with the GTC 3. Place of Delivery: Koleje Wielkopolskie Sp. z o.o., ul. Kolejowa 3, 66-210 Zbąszynek, Zbąszynek Rolling Stock Maintenance Point. The Contractor, no later than 12 hours before commencing the execution of the order, is obliged to confirm the date of delivery of the goods, including the time of delivery. 4. Method of Delivery: One-time Delivery, Price Should Include the Cost of Delivery and Unloading. 5. Payment Date - In accordance with the GTD; (payment deadline 30 Days From Invoice Issue) The Buyer accepts the issuance and delivery of Electronic Invoices by the Seller, in accordance with Art. 931, as amended; hereinafter referred to as "the VAT Act"). When issuing an electronic invoice, the seller is obliged to prepare it in pdf format. In the case of issuing an electronic invoice, the Seller is obliged to deliver it to the Buyer to the following e-mail address: Faktury@koleje-wielkopolskie.com.pl 6. Warranty conditions - in accordance with the GTC; 7. Deadline for Removing Defects Under the Guarantee - In accordance with the GTD; 8. Contractual Penalties - Pursuant to § 7 of the GTC (the ordering party informs that the Penalties referred to in § 7 Section 1 Item A) of the GTC will be charged in the event of the Supplier's delay of more than 5 Business Days. Additionally, § 7 Sec. 1 pt. C) Owd). iii. The course of the Proceedings: The Ordering Party informs that the Proceedings are conducted in two stages: A) Stage I - Bidding, B) Stage II - Electronic Bidding - Bidding will start automatically after the end of Stage I It will last 15 minutes and Extra Time - Sub-stage of Stage II, which The terms and conditions are described in detail in the Procurement Platform's Proceedings Setting. Each Overtime Lasts 3 Minutes - Starts if Within the Last 3 Minutes of the Proceedings, Another Bid (proceeding) is submitted correctly. Contractors approved by the Employer who fail to submit a Proposal correctly at the Bid Submission Stage (and Stage) will be automatically removed from further stages of the Proceedings. The Ordering Party grants approval for the Order by placing on the Purchasing Platform Information about the Selection of the Most Advantageous Offer. With the moment referred to in the preceding sentence, the Order is awarded. The Ordering Party is entitled to withdraw from awarding the Order at any time. IV. Contractor's declarations: The Contracting Authority informs that participation in the proceedings in question is tantamount to submitting the following declarations: 1. I declare that I have fulfilled the information obligations provided for in Art. In order to apply for the award of a public contract in this procedure. *Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation ) (OJ L 119 Z 04/05/2016, p. 1). 2. I declare that I consent to the processing of my personal data provided by me voluntarily to the Ordering Party. Information Clause With Art. 13 of the GDPR - Has been posted on the Eb2b Purchasing Platform in the "Information Obligation" tab. 3. I declare that the Price Offer on the Purchasing Platform was submitted by the Person Authorized to Represent the Contractor. 4. I declare that the Contract in question will be performed by contractors who are not subject to exclusion pursuant to Article 5k of Council Regulation (EU) No. 833/2014 of July 31, 2014 concerning restrictive measures in connection with Russia's activities destabilizing the situation in Ukraine (Journal U. E. L. Z 2014, No. 229, p. 1, as amended) and pursuant to Art. 1 of the Act of April 13, 2022 on Special Solutions for Counteracting the Support of Aggression against Ukraine and for the Protection of National Security (i.e. Journal of Laws of 2023, item 129, as amended) V. Additional information: Proceedings underway Pursuant to the provisions of § 25 of the Sub-threshold Sectoral Procurement Regulations, available to Contractors on the Contracting Entity's website https://koleje-wielkopolskie.com.pl/. The General Terms and Conditions of Delivery of Koleje Wielkopolskie Sp. Z O.O. Available on the Ordering Party's website https://koleje-wielkopolskie.com.pl/. Information Clause With Art. 13 of the GDPR - Has been posted on the Eb2b Purchasing Platform in the "Information Obligation" tab. Please direct any questions regarding the Procedure via the Purchasing Platform. Technical Support can be obtained at the telephone number in the footer at the bottom of the page. Pursuant to Art. 7 Para. 1 of the Act of April 13, 2022 on Special Solutions for Counteracting the Support of Aggression against Ukraine and for the Protection of National Security (i.e. Journal of Laws of 2023, item 129, as amended; hereinafter referred to as the "Sanctions Act"), The Contractor is excluded from this Public Procurement Procedure: 1) Listed in the Council Regulation (EC) No. 765/2006 of 18 May 2006 concerning restrictive measures due to the situation in Belarus (Journal of Laws of the EU L 134 Z 20.05.2006, p. 1, as amended, hereinafter "Regulation 765/2006") and Council Regulation (EU) No. 269/2014 of 17 March 2014 on restrictive measures in relation to activities undermining the integrity Territorial, Sovereignty and Independence of Ukraine or threatening them (Journal of Laws of the EU L 78 Z 17.03.2014, p. 6, as amended; hereinafter referred to as "Regulation 269/2014") Or Entered on the List Based on the Decision on the Entry To the Determining List of the Measures referred to in Art. 1 Item 3 of the Sanctions Act; 2) Whose Beneficial Owner within the meaning of the Act of 1 March 2018 on Counteracting Money Laundering and Terrorist Financing (Journal of Laws of 2022, items 593, 655, 835, 2180 and 2185) is the person listed in the lists specified in Regulation 765/2006 and Regulation 269/2014 or entered on the list or being such a beneficial owner from February 24, 2022, as long as it was entered on the list on the basis of the decision on entry on the list determining the application of the measure referred to in Art. 1 Item 3 of the Sanctions Act; 3) whose Parent Undertaking within the meaning of Art. 3 Sec. 1 Item 37 of the Act of 29 September 1994 on Accounting (Journal of Laws of 2021, items 217, 2105 and 2106 and of 2022, item 1488), is an entity listed in the lists specified in Regulation 765/2006 I Regulation 269/2014 or entered on the list or being such a Parent Company from February 24, 2022, provided that it was entered on the list on the basis of a decision on entry on the list determining the application of the measure referred to in Art. 1 Item 3 Sanctions Act. Pursuant to Article 5k of Council Regulation (EU) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia's actions destabilizing the situation in Ukraine (Journal of Laws of the EU L. Z 2014 No. 229, p. 1 As amended; hereinafter "Regulation 833/2014"), The Contractor is excluded from this Public Procurement Proceeding: 1) a Russian citizen, a natural person residing in Russia or a legal person, entity or body with its registered office in Russia; 2) A legal person, entity or body to which ownership rights, directly or indirectly, in more than 50% belong to Russian citizens or natural persons residing in Russia, or legal persons, entities or bodies based in Russia; 3) A natural or legal person, entity or body acting on behalf of or under the direction of the entity referred to in point 1) or 2) of this section, and using subcontractors, suppliers or entities on whose capacity (if applicable), belonging to To one of the above Categories of Entities, in the event that they account for more than 10% of the Order Value.
Closing Date19 Feb 2025
Tender AmountRefer Documents 

National Road and Highway Directorate Tender

Others
Corrigendum : Closing Date Modified
Poland
Details: I. Subject of the Proceedings: 1. Description of the Subject of the Order: - Thermal Transfer Paper 135 G, 100mm X 84.5 On A Roll Up To 36wehd - 5 pcs. Thermal Transfer Paper For Zebra Gk420t Thermal Printer Roll media are wound on a core with a diameter of 12.7 to 38.1 Mm (0.5 To 1.5 Inch). Continuous Roll Media has no gaps, holes, or black separation marks. 2. above The Assortment Must Meet The Following Requirements: Be New And Free From Defects, Original, Not Encumbered With Third Party Rights, 3. Accompanying Documentation: None 4. Offer Evaluation Criterion: Price 99%, 1% Completion Time Ii. Terms of Order Execution: 1. Execution Date - Order Execution Date Expected by the Ordering Party 7 Business Days. The Ordering Party indicates that it allows the submission of Tenders with a deadline longer than 7 Business Days. - The unit "days" defined in the Criterion of the Execution Date should be understood as Business Days - Execution Hours - 8:00 am to 2:00 pm 2. Rules for the Delivery and Unloading of Goods - In accordance with the GTC 3. Place of Delivery: Koleje Wielkopolskie Sp. z o.o., ul. Leśna 1d, 62-100 Wągrowiec, Rolling Stock Maintenance Point in Wągrowiec The Contractor, not later than 12 hours before commencement of the Order, is obliged to confirm the date of delivery of the Goods, including the delivery time. 4. Method of Delivery: One-time Delivery, Price Should Include the Cost of Delivery and Unloading. 5. Payment Date - In accordance with the GTD; (payment deadline 30 Days From Invoice Issue) The Buyer accepts the issuance and delivery of electronic invoices by the Seller, in accordance with Art. 931, as amended; hereinafter referred to as "the VAT Act"). When issuing an electronic invoice, the seller is obliged to prepare it in pdf format. In the case of issuing an electronic invoice, the Seller is obliged to deliver it to the Buyer to the following e-mail address: Faktury@koleje-wielkopolskie.com.pl. 6. Guarantee conditions - In accordance with the GTC; 7. Deadline for Removing Defects Under the Guarantee - In accordance with the GTD; 8. Contractual Penalties - Pursuant to § 7 of the GTC (the ordering party informs that the Penalties referred to in § 7 Section 1 Item A) of the GTC will be charged in the event of the Supplier's delay of more than 5 Business Days. Additionally, § 7 Sec. 1 pt. C) Owd). iii. The course of the Proceedings: The Contracting Entity informs that the Proceedings are conducted in two stages: A) Stage I - Bid submission, B) Stage II - Electronic Bidding - Bidding will start automatically after the end of Stage I It will last 15 minutes and Extra Time - Sub-stage of Stage II, which The terms and conditions are described in detail in the Procurement Platform's Proceedings Setting. Each Overtime Lasts 3 Minutes - Starts if Within the Last 3 Minutes of the Proceedings, Another Bid (proceeding) is submitted correctly. Contractors approved by the Employer who fail to submit a Proposal correctly at the Bid Submission Stage (and Stage) will be automatically removed from further stages of the Proceedings. The Ordering Party grants approval for the Order by placing on the Purchasing Platform Information about the Selection of the Most Advantageous Offer. With the moment referred to in the preceding sentence, the Order is awarded. The Ordering Party is entitled to withdraw from awarding the Order at any time. IV. Contractor's declarations: The Contracting Authority informs that participation in the proceedings in question is tantamount to submitting the following declarations: 1. I declare that I have fulfilled the information obligations provided for in Art. In order to apply for the award of a public contract in this procedure. *Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation ) (OJ L 119 Z 04/05/2016, p. 1). 2. I declare that I consent to the processing of my personal data provided by me voluntarily to the Ordering Party. Information Clause With Art. 13 of the GDPR - Has been posted on the Eb2b Purchasing Platform in the "Information Obligation" tab. 3. I declare that the Price Offer on the Purchasing Platform was submitted by the Person Authorized to Represent the Contractor. 4. I declare that the Contract in question will be performed by contractors who are not subject to exclusion pursuant to Article 5k of Council Regulation (EU) No. 833/2014 of July 31, 2014 concerning restrictive measures in connection with Russia's activities destabilizing the situation in Ukraine (Journal U. E. L. Z 2014, No. 229, p. 1, as amended) and pursuant to Art. 1 of the Act of April 13, 2022 on Special Solutions for Counteracting the Support of Aggression against Ukraine and for the Protection of National Security (i.e. Journal of Laws of 2023, item 129, as amended) V. Additional information: Proceedings underway Pursuant to the provisions of § 25 of the Regulations for the Award of Sub-threshold Sectoral Contracts, Available to Contractors on the Ordering Party's website https://koleje-wielkopolskie.com.pl/. The General Terms and Conditions of Delivery of Koleje Wielkopolskie Sp. Z O.O. Available on the Ordering Party's website https://koleje-wielkopolskie.com.pl/. Information Clause With Art. 13 of the GDPR - Has been posted on the Eb2b Purchasing Platform in the "Information Obligation" tab. Please direct any questions regarding the Procedure via the Purchasing Platform. Technical Support can be obtained at the telephone number in the footer at the bottom of the page. Pursuant to Art. 7 Para. 1 of the Act of April 13, 2022 on Special Solutions for Counteracting the Support of Aggression against Ukraine and for the Protection of National Security (i.e. Journal of Laws of 2023, item 129, as amended; hereinafter referred to as the "Sanctions Act"), The Contractor is excluded from this Public Procurement Procedure: 1) Listed in the Council Regulation (EC) No. 765/2006 of 18 May 2006 concerning restrictive measures due to the situation in Belarus (Journal of Laws of the EU L 134 Z 20.05.2006, p. 1, as amended, hereinafter "Regulation 765/2006") and Council Regulation (EU) No. 269/2014 of 17 March 2014 on restrictive measures in relation to activities undermining the integrity Territorial, Sovereignty and Independence of Ukraine or threatening them (Journal of Laws of the European Union L 78 Z 17.03.2014, p. 6, as amended; hereinafter referred to as "Regulation 269/2014") Or Entered on the List Based on the Decision on the Entry To the Determining List of the Measures referred to in Art. 1 Item 3 of the Sanctions Act; 2) Whose Beneficial Owner within the meaning of the Act of 1 March 2018 on Counteracting Money Laundering and Terrorist Financing (Journal of Laws of 2022, items 593, 655, 835, 2180 and 2185) is the person listed in the lists specified in Regulation 765/2006 and Regulation 269/2014 or entered on the list or being such a beneficial owner from February 24, 2022, as long as it was entered on the list on the basis of the decision on entry on the list determining the application of the measure referred to in Art. 1 Item 3 of the Sanctions Act; 3) whose Parent Undertaking within the meaning of Art. 3 Sec. 1 Item 37 of the Act of 29 September 1994 on Accounting (Journal of Laws of 2021, items 217, 2105 and 2106 and of 2022, item 1488), is an entity listed in the lists specified in Regulation 765/2006 I Regulation 269/2014 or entered on the list or being such a Parent Company from February 24, 2022, provided that it was entered on the list on the basis of a decision on entry on the list determining the application of the measure referred to in Art. 1 Item 3 Sanctions Act. Pursuant to Article 5k of Council Regulation (EU) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia's actions destabilizing the situation in Ukraine (Journal of Laws of the EU L. Z 2014 No. 229, p. 1 As amended; hereinafter "Regulation 833/2014"), The Contractor is excluded from this Public Procurement Proceeding: 1) a Russian citizen, a natural person residing in Russia or a legal person, entity or body with its registered office in Russia; 2) A legal person, entity or body to which ownership rights directly or indirectly belong to Russian citizens or natural persons residing in Russia in more than 50% or legal persons, entities or bodies based in Russia; 3) A natural or legal person, entity or body acting on behalf of or under the direction of the entity referred to in point 1) or 2) of this section, and using subcontractors, suppliers or entities on whose capacity (if applicable), belonging to To one of the above Categories of Entities, in the event that they account for more than 10% of the Order Value.
Closing Date13 Jan 2025
Tender AmountRefer Documents 

DEPT OF THE AIR FORCE USA Tender

Software and IT Solutions
Corrigendum : Closing Date Modified
United States
Details: Aflcmc Data Operations Cso 1.0 Overview this Commercial Solutions Opening (cso) Is Intended To Be A Streamlined Vehicle To Allow For The Establishment Of A Modern Data Operations (dataops) Solution Supporting A Variety Of Critical National Security Systems. This Cso Authority Is Established Under Section 803 Of The National Defense Authorization Act (ndaa) For Fiscal Year (fy) 2022 (pub. L. 117-81) And Class Deviation 2022-o0007. The Air Force Life Cycle Management Center (aflcmc) Programs Require The Utilization And Leveraging Of The Latest Technology Advances From A Large Variety Of Prospective Contractors. Aflcmc Invites Innovating Technical Approach Proposals Addressing All Aspects Of Dataops Focusing On The Below Objective Areas. However, These Enumerated Focus Areas Are Minimum Requirements, And Aflcmc Is Open To The Identification Of Technologies Useful For Modernizing Dataops For Sophisticated Security And Weapon Systems. This Requires Delivering An Enduring, Secure, Robust, Efficient, Responsive, Agile, Elastic, And Extensible Classified Dataops Solution. This Cso Will Focus On Existing And Emerging Technologies And Platforms Across Aflcmc, Department Of The Air Force (daf), Department Of Defense (dod) And The Intelligence Community, As Well As Leveraging Commercial Markets To Perform An Integrated Analysis Of The Capabilities Of Varying Technologies That Support Our Critical National Security Systems And Prioritize Investments Over Time. the Cso May Result In The Award Of Far Part 12 Contracts Or Other Transaction Agreements (otas) Under 10 Usc 4022, Through Calls Via Amendments To The Cso. The Government Anticipates Future Calls To Be Competitively Solicited. These Calls Will Contain Specific Areas Of Interest, User Stories And/or Problem Statements Related To Program Specific Dataops Focus Areas. These Specific Areas Of Interest Are What Prospective Contractors Shall Focus Their Solutions Towards. The Government Reserves The Right To Issue Separate Calls For Each Dataops Focus Area Or Combine Several Focus Areas Under An Individual Call. disclaimer: No Proposals Or White Papers Are Being Requested At This Time. Those Will Be Requested Via Calls Published Under The Cso Solicitation. aflcmc Is Not Obligated To Make Any Awards From Any Publicized Call, And All Awards Under This Cso Are Explicitly Subject To The Availability Of Funds And Successful Negotiations. The Government Is Not Responsible For Any Monies Expended By Any Vendor Prior To The Issuance Of Any Awarded Contract/agreement. Aflcmc Reserves The Right To Modify The Solicitation Requirements Of This Cso And Each Subsequent Call At Its Sole Discretion. this Cso Seeks To Fund Innovative Technologies That Propose New Solutions To Expand Aflcmc’s Capabilities As It Relates To Modern Dataops Focus Areas. Aflcmc Is Interested In Capabilities From All Interested Vendors To Include, But Not Limited To, Traditional Defense Contractors, Nontraditional Defense Contractors, Large Businesses, Small Businesses, And Research Institutions (collectively Referred As Vendors). It Should Be Noted, Many Of The Critical National Security Systems Operate In Varying Classification Environments, Including Highly Classified Environments – Such As Collateral, Sensitive Compartmentalized Information, And Special Access Program. Though Some Dataops Focus Areas May Require Unclassified Work, Respondents Should Be Aware That Vendors Cleared To Work, Or The Ability To Be Cleared To Work, In Highly Classified Environments Will Be Necessary For Any Award. The Cso Is A Streamlined Acquisition Process That Seeks To Reduce Acquisition Timelines And Acquire New, Innovative Solutions That Vendors Can Bring Forth To Meet The Stated Areas Of Interest Detailed In Each Call. 2.0 Dataops Technology Focus Areas aflcmc Is Seeking Capabilities To Prove Out End-to-end Dataops For Representative Modern Embedded Weapon Systems. The Desired End-state Is A Dataops Capability/prototype That Enables A Weapon System To Exploit Data Across The Full Lifecycle Of An Embedded Weapon System (development, Integration, Test, Deployment, Operations And Sustainment) Across All Classification Levels. An Ideal Partner Has First-party Ability To Directly Modify Underlying Commercial Hyperscale And Edge Cloud Fabric To Meet The Project’s Requirements Across All Classification Levels And Supporting Partners Would Be Considered As Enabling Providers Supporting Specific Aspects Of The Potential Solution. each Technology Focus Area Identifies An Area Where Prospective Vendors Can Bring Substantial Value To Meet The Dataops Mission. These Focus Areas Are Meant To Be Read Expansively And Are Not Limited To The Enumerated Focus Areas. Additional Focus Areas May Be Included Via Amendments To This Cso. Aflcmc Prefers To Bucket Several Focus Areas Into Singular Calls, Which Means Vendors That Can Optimize Several Focus Areas Will Be Preferred. Aflcmc Requires Provider(s) To Deliver An Innovative State-of-the-art Commercial Solution That Innovates All Or Some Of The Following Capability Areas. whether Using A Single Vendor Or Using Multiple Vendors, Aflcmc’s Intended Minimum Viable Product (mvp) Should Contain The Following Six Foundational Attributes: 1. Hybrid Cloud Iaas, Paas, Saas: aflcmc Seeks Solutions For Infrastructure As A Service (iaas), Platform As A Service (paas), And Software As A Service (saas) That Can Be Hosted In A Hybrid Cloud Architecture. For The Purposes Of This Cso, “hybrid Cloud” Is Defined As: A Virtual Environment Provided To A Single Customer That Combines Private Cloud Compute, Storage, And Services Running On-premises With Compute, Storage, And Services Running In A Public Cloud Along With The Ability To Move Information Seamlessly And Transparently Between Them. All Offerings Will Be Templated, Extensible, And Elastically Scalable On Converged And/or Hyperconverged Infrastructure. All Offerings Will Support “bring Your Own ‘x’,” Such That Aflcmc Can Re-host Existing Workloads Without Interruption. All Offerings Will Comply With Relevant Department Of Defense Instructions, Regulations, And Policies Such That They Will Be Readily Accreditable And Interoperable With Existing Dod Networks And Information Systems At The Unclassified, Secret, And Top-secret Classification Levels. Additionally, All Offerings Will Be Accredited Or Readily Accreditable To Handle Special Access Program (sap) And Sensitive Compartmented Information (sci) Handling Caveats At The Secret And Top-secret Classification Levels. 2. Information Transport aflcmc Is Seeking Solutions For Information Transport That Complies With Relevant Department Of Defense Instructions, Regulations, And Policies Such That Any Transport Solution Offering Will Be Readily Accreditable And Interoperable With Existing Department Of Defense Information Networks (dodin). Information Transport Offerings Will Also Be Required To Interoperate With The Hybrid Iaas, Paas, And Saas Solutions Offered Under Technology Focus Area (1). All Information Transport Offerings Must Operate In Multi-level Classification Environments, Enabling Multi-modal Connectivity From Anywhere In The Continental United States (conus) Via A High-bandwidth/low-latency Transport Solution. Cryptographic Transport Shall Meet National Security Agency (nsa) Type 1 Encryption Products Or Equivalent Cryptographic Solutions. Further, Aflcmc Requires Capability To Support Edge Resources To Operate In Disconnected, Intermittently Connected Or Low-bandwidth (dil) Environments. Initial Connectivity Shall Encompass Wright-patterson Air Force Base (afb), Edwards Afb, Tinker Afb And An Off-base Facility In The Dayton, Ohio Greater Metropolitan Area. 3. Fielding Operations aflcmc Is Seeking Solutions To Rapidly Deploy The Solutions Acquired Under Focus Areas (1) And (2). To Support Our System Program Offices, Aflcmc Desires Rapid “full Network/crypto” Deployability To New Locations Within 30 Days From Award. Connections Should Include All Enterprise Capabilities Such As Nipr, Sipr, Jwics, Existing Classified, Sap Capable, Hyper-elastic Cloud Regions And Other Program Networks. Moreover, Aflcmc Seeks Automated Disaster Recovery Functionality To Support Continuity Of Operations (coops). 4. Crypto-net Managements/commercial Solutions For Classified aflcmc Requires Innovative Commercial Products To Be Used To Protect Classified Data, Including Both Data-in-transit (dit) And Data-at-rest (dar). To The Maximum Extent Practicable, Technologies For Aflcmc Shall Be Procured In Accordance With Requests Commercial Solutions For Classified (csfc) Services To Comply With The Committee On National Security Systems Policy (cnssp) No. 11, National Policy Governing The Acquisition Of Information Assurance And Ia-enabled Information Technology Products.” 5. Network Operations Center (noc) / Security Operations Center (soc) aflcmc Is Seeking Solutions To Support, Enable, And Augment Network Administration And Cybersecurity Operations For Solutions Acquired Under Focus Areas (1) And (2). Solutions Will Include Services That Enable Real-time And Near Real-time Metering, Auditing, Logging, Monitoring, And Status Reporting Of The Entire Virtual Environment. 6. Help Desk aflcmc Requires A Customer Support Help Desk To Assist End-users In Navigating, Utilizing And Accessing Data Within The Cloud Environments. Aflcmc Envisions A Software-as-a-service That Can Manage All Communication And Network Channels, Establish Performance Metrics And Monitoring, And Is Maximally Available To Meet Mission Requirements. aflcmc Is Interested In Additional Focus Areas Beyond The Above Six (6) Foundational Dataops Focus Areas. Aflcmc May Issue Calls Against The Below Supplemental Focus Areas. These Supplemental Focus Areas Are Meant To Be Read Expansively And Not Limited To The Enumerated Areas. Additional Focus Areas Beyond Those Enumerated Below May Be Included Via An Individual Call Against This Cso. Vendors That Meet Some Or All The Above Focus Areas May Also Identify Capabilities For The Additional Focus Areas. i. Secure Access Service Edge aflcmc Has A Requirement To Provide Consistent, Fast And Secure Access To Dispersed End Users Operating In Permanent Military Installations As Well As Forward Operating Base. Services Should Establish Identity-driven Security Compliant With Us Government Security Parameters For All Classification Levels (unclassified, Secret, Top Secret And Sap Programs). ii. Software-defined Networking (sdn) aflcmc Has A Requirement To Explore Implementing Sdn For Fully Networked Command, Control And Communications (c3) Functionality, Particularly In Day-to-day Military Operating Base (mob) And Sustainment Missions. Sdn Should Contain A High Degree Of Network Programmability And Reconfigurability To Meet The Needs Of Different Government Systems And Emphasize Advantageous Situational Awareness For Faster Response Times. Further, Aflcmc Is Interested In Other Ways Sdn Can Be Applied To Military Environments While Preserving Data Security. iii. Edge Hyper-converged Infrastructure aflcmc Anticipates Migrating Away From Discrete, Hardware-defined Systems Toward Software-defined Environments Permitting All Functionality Through Commercial Service Platforms While Protecting Data At All Classification Levels (unclassified, Secret, Top Secret, Sap). iv. Zero Trust Architecture given The Security Posture Of Many Programs, Aflcmc Requires Zero Trust Security Architecture By “never Trusting, Always Verifying” Network Security. Aflcmc Desires Strong Identity Verification, Validation Of Device Compliance Before Granting Access And Ensuring Least Privilege Access. v. Infrastructure As Code (iac) infrastructure As Code Is The Process Of Managing And Provisioning Computer Data Centers Through Machine-readable Definition Files, Rather Than Physical Hardware Configuration Or Interactive Configuration Tools. Aflcmc Seeks Partners Who Would Be Able To Expedite The Onboarding Process For New Players By Inflating An Iac Instance Within A Cloud Environment, Enabling Immediate Executability Of Licenses, Cloud Resource Management, And Other Capabilities. vi. Cloud Native Design on-premises (on-prem) Infrastructure Comes With An Immense Number Of Limitations As Well As A High Threshold For Entry For New Players In Terms Of Hardware Investments And Schedule Lead Times. Utilization Of Cloud Native Designs For All Network Mapping, Tooling, Iaas, Etc. Is Of Extreme Interest To Aflcmc. vii. Software Defined Perimeter Enabling Classified Data Processing aflcmc Participates In Work Ranging From Cui All The Way Up To Ts/sar/sci. Having Cloud Native, Logically Defined Perimeters Around Separate Enclaves That Exist At Various Classification Levels Is Critical To Mission Success. Organizations Should Be Prepared To Provide A Body Of Evidence To Demonstrate Logical Controls That Safeguard Information At Different Impact Levels (ils). viii. Augmented And Virtual Reality Capabilities (e.g., Training, Maintenance, Etc.) aflcmc Requires Commercial Augmented And Virtual Reality Capabilities To Assist Usaf Maintenance And Service Technicians To Interface With Usaf Systems. Applications Should Have Practical Maintenance Applications As Well As Training Capabilities. ix. Data Encryption (at Rest, In Motion, Fips 140-3) experience With Encrypting And Safeguarding Data Is Critical To Dod Success And Cybersecurity. Fips 140.3 Is The Standard That Shall Be Used In Designing And Implementing Cryptographic Modules That Federal Departments And Agencies Operate Or Are Operated For Them Under Contract. The Standard Provides Four Increasing, Qualitative Levels Of Security Intended To Cover A Wide Range Of Potential Applications And Environments. The Security Requirements Cover Areas Related To The Secure Design, Implementation, And Operation Of A Cryptographic Module. These Areas Include Cryptographic Module Specification; Cryptographic Module Interfaces; Roles, Services, And Authentication; Software/firmware Security; Operating Environment; Physical Security; Non-invasive Security; Sensitive Security Parameter Management; Self-tests; Life-cycle Assurance; And Mitigation Of Other Attacks. Organizations With Familiarization And Expertise With Establishing And Maintaining Compliant Data Encryption Could Be Of Use To The Dod. x. Cyber, Secure Processing due To The Sensitive Nature Of The Usaf Mission, The Ability To Leverage Cyber Secure Processing, Compliant With Dod Standards For All Impact Levels Is Required. xi. Machine Learning (ml) And Artificial Intelligence (ai) Data Factories aflcmc Seeks To Find New And Innovative Ways To Deploy And Enable Ai/ml To Identify Areas Of Interest Within Large Data Sets. These Data Factories Should Be Able To Pinpoint Concerns, Operational Or Safety Threats, And Shall Help Alleviate Human In The Loop (hitl) Man Hours Currently Required To Analyze Data Sets. xii. Big Data Capability (data Warehousing, Data Lakes, Restructured Data Engineering) test Sets Drive A Requirement To Capture, Transport, And Analyze Massive Amounts Of Data In Near-real-time, As Well As A Requirement To Host Portions Of That Data For An Indefinite Amount Of Time. Aflcmc Has Interest In Organizations That Have Experience With Long-term Data Lakes, And Data Storage With The Ability To Enable Petabyte And Exabyte Transport At High Speeds Between Various Conus And Oconus Locations. xiii. Continuous Integration (ci)/continuous Development (cd) Software Pipeline aflcmc Utilizes A Devsecops Framework For Many Of Its Projects. Ci/cd Pipelines Enable Alfcmc To Adapt To Emerging Threats. Entities With Experience In Optimization And Automation Of Ci/cd Pipelines Would Be Of Particular Use To The Dod. xiv. Application Development + Application Refactoring For Cloud Deployment aflcmc Sees A Future Use Case Of Being Able To Pull Data Developed From Another Dod Organization To Be Easily Digested And Absorbed From A Cloud Environment And Then Re-tooled To Meet Mission Requirements. Aflcmc Requires A Cloud-based Platform To Host Both The Outputs Of Application Development (ie App Store) As Well As A Toolkit To Refactor An Applications Targeted Use. xv. Existing Capability Refactoring/integration For Application Programming Interface (api) Microservice Architecture aflcmc Has A Potential Future Requirement To Establish A Microservice Architecture To Iteratively Build New Applications/capability Without Impacting Availability Of Systems. Aflcmc Requires Microservice Refactoring Within Designated Cloud-based Platforms. xvi. Reverse Engineering aflcmc Has A Potential Future Requirement For Reverse Engineering Services. In Instances Where Aflcmc Lacks Sufficient Engineering Data For Varying Aircraft Or Supporting System Parts, Aflcmc Desires The Ability To Conduct Reverse Engineering Services To Produce Underlying Engineering Data Necessary For Alternate Sourcing Of Parts Or Manufacturing Of The Parts. xvii. Additive Manufacturing aflcmc Desires Additive Manufacturing Services With The Capacity For Potential On-premises Manufacture Of Varying Parts. Aflcmc Seeks Commercial Application Of 3d Printers And Other Technologies That Permit Immediate Production Of Parts To Reduce Mission Incapable Awaiting Parts (micap) Status Of Critical Systems/assets. 3.0 Cso With Calls this Cso Is A Hybrid Solicitation Against Which Both Closed Calls And/or Open Period Calls Can Be Published Via Amendments To The Cso. All Calls Issued Under This Cso Will Include Specific Instructions Including Dates, Areas Of Interest/focus Areas, Evaluation Criteria And Proposal Instructions To Offerors. While Each Offer Shall Adhere To This Cso, The Calls May Contain Other Information Of Which The Proposing Vendors Should Also Strictly Adhere. Each Call Will Be Announced On The Government Point Of Entry (beta.sam.gov), Which May Result In The Award Of A Far Part 12 Contract Or An Other Transaction Agreement (ota) Under 10 Usc 4022. 3.1 Closed Calls (one-step Or Two-step) over The Period Of This Cso, Calls May Be Issued To Request White Papers And/or Proposals For Specific Areas Of Interest/focus Areas. It Will Be Determined On A Call-by-call Basis Whether The Announcement Is For A One-step (proposals Only) Or A Two-step Process (white Paper First, Then Proposals By Invite-only). The Submission For White Papers And Proposals Shall Be Submitted At A Specific Date And Time As Set For In Each Particular Call. White Papers And/or Proposals May Not Be Reviewed If Submitted After The Stated Date And Time. 3.1.1 One-step Calls step 1: Proposal Due Date And Time Will Be Provided In Calls Issued Against This Cso. Aflcmc Will Make Selections From Vendor Proposals Only In Accordance With The Evaluation Criteria Contained In The Call. 3.1.2 Two-step Calls step 1: White Paper Due Date And Time Will Be Provided In Calls Issued Against This Cso. Aflcmc, At Its Sole Discretion, May Or May Not Request A Presentation Or Discussion With Government Personnel About The White Paper. step 2: Proposal Due Date And Time Will Be Provided In Requests For Proposal (rfps) Sent To Offers That Submit White Papers Who Are Evaluated Favorably In Accordance With The Evaluation Criteria Contained In Each Call. 3.2 Open Period Calls (two-step) this Cso May Also Have Open Period Calls. Open Period Calls Will Only Be Issued Under A Two-step Process (see 3.1.2 Above). After An Open Call Is Published, White Papers May Be Submitted At Any Time During An Open Period For The Areas Of Interest/focus Areas Detailed Within The Call. It Is Important To Note That Only White Papers Submitted In Response To Specific Areas Of Interest/focus Areas Detailed In The Call Will Be Considered. step 1: White Paper Due Date And Time Will Be Provided In Calls Issued Against This Cso. Aflcmc, At Its Sole Discretion, May Or May Not Request A Presentation Or Discussion With Government Personnel About The White Paper. step 2: Proposal Due Date And Time Will Be Provided In Requests For Proposal (rfps) Sent To Offers That Submit White Papers Who Are Evaluated Favorably In Accordance With The Evaluation Criteria Contained In Each Call. 4.0 Definitions cso With Calls: This Allows For The Publication Of An Umbrella Cso Solicitation That Contains Overarching Information But Does Not Request White Papers Or Proposals. The Cso Functions As A Framework Identifying The Technical Areas And Giving The Basic Terms And Administrative Information Of The Cso. The Requests For White Papers And/or Proposals Are Done By Issuing Calls That Are Published Via Amendments To The Cso. Calls Can Be Issued At Any Time During The Period Of Performance Of The Cso. Each Call Will Be Tailored To Best Fit The Acquisition Approached Identified By The Government. The Calls May Also Include Specific Terms And/or Conditions That Apply To That Particular Call Such As Technical Details, Security Requirements And/or Other Pertinent Clauses. Proposals Or White Papers Are Submitted Only When Calls Under This Cso Are Published. open Period Calls: This Type Of Call Allows For White Paper And Proposal Submittals At Any Time Within A Specified Period As Set Forth In The Subsequent Call. closed Calls: This Type Of Call Allows For White Paper And/or Proposal Submittals At A Specified Date And Time As Set Forth In The Subsequent Call. This Process And The Dates Associated With It Are More Structured Than Open Period Calls. areas Of Interest/ Focus Areas: These Are Specific Requests For Innovative Solutions That Aflcmc Will Detail In Each Subsequent Call And Will Derive From The Technology Focus Areas (2.0 Above). Vendor’s Innovative Solutions Should Focus On Addressing The Specific Technology Focus Areas Contained Within A Specific Call. white Paper: A Brief (usually 2-5 Pages) Summary Of The Proposed Technical Approach With An Accompanying Rough Order Of Magnitude (rom) Price. pitch Day: Pitch Day Is A Tool That Can Be Used As Part Of The Call Process. When Used, Pitch Day Gives Vendors An Opportunity To Meet Aflcmc Personnel In-person And Provide A Pitch Of Their Proposed Technology. If A Pitch Day Is Utilized, Specific Details Explaining The Process And Evaluation Methods Will Be Contained Within A Specific Call. other Transaction: Refers To The Type Of Other Transaction Agreement (ota) That May Be Placed As A Result Of This Cso And Associated Calls. This Type Of Ot Is Authorized By 10 Usc 4022 For Prototype Projects Directly Relevant To Enhancing The Mission Effectiveness Of Military Personnel And The Supporting Platforms, Systems, Components, Or Materials Proposed To Be Acquired Or Developed By The Department Of Defense (dod), Or For The Improvement Of Platforms, Systems, Components, Or Materials In Use By The Armed Forces. This Type Of Ota Is Treated By Dod As An Acquisition Instrument, Commonly Referred To As An “other Transaction” For A Prototype Project Or A Section 4022 “other Transaction.” prototype Project: Can Generally Be Described As A Proof Of Concept, Model, Reverse Engineering To Address Obsolescence, Pilot, Novel Application Of Commercial Technologies For Defense Purposes, Agile Development Activity, Creation, Design, Development, Demonstration Of Technical Or Operational Utility, Or Combinations Of The Foregoing. A Process, Including A Business Process, May Also Be The Subject Of A Prototype Project. Although Assistance Terms Are Generally Not Appropriate In Ot Agreements In 10 U.s.c. 4022, Ancillary Work Efforts That Are Necessary For Completion Of The Prototype Project, Such As Test Site Training Or Limited Logistics Support, May Be Included In Prototype Projects. A Prototype May Be Physical, Virtual, Or Conceptual In Nature. The Quantity Of Prototypes/commercial Solutions Should Generally Be Limited To That Needed To Prove Technical Or Manufacturing Feasibility Or Evaluate Military Utility. innovative: This Refers To Any Technology, Process, Or Method, Including Research And Development That Is New As Of The Date Of Proposal Submission; Or Any New Application Of An Existing Technology, Process Or Method As Of The Proposal Date. nontraditional Defense Contractor: As Defined In 10 U.s.c. 2302(9) As An Entity That Is Not Currently Performing And Has Not Performed, For At Least The One-year Period Preceding The Solicitation Of Sources By The Dod For The Procurement Or Transaction, Any Contract Or Subcontract For The Dod That Is The Subject For Full Coverage Under The Cost Accounting Standards Prescribed Pursuant To 41 U.s.c. 1502 And The Regulations Implementing Such Section. This Includes All Small Business Concerns Under The Criteria And Size Standards In 13 C.f.r. Part 121. small Business Concern: Defined In The Small Business Act (15 U.s.c. 632) And 13 C.f.r. Part 121. 5.0 Contract/agreement Details as Stated In The Overview Section, Calls Issued Under This Cso Can Result In The Award Of Either A Far Part 12 Contract Or An Other Transaction Agreement (ota) Under 10 U.s.c. 4022. Regardless Of The Contract Instrument, Aflcmc Chooses To Pursue The Contract/agreement Type For All As Fixed Price, Which Includes Firm Fixed Price (ffp) And Fixed Price Incentive (fpi). Future Solicitations Are Not Accepting Offers For Grants Or Cooperative Agreements As The Purpose Of This Cso Is To Transfer Something Of Value Directly To The Government. the Government Will Be The Sole Decision Authority On Whether To Pursue A Far Part 12 Contract, An Ota Or No Award At All. The Government Reserves The Right To Award Some, All Or None Of The Proposal From The Responses To Each Call. The Contracting/agreements Officer Reserves The Right To Negotiate Directly With The Offeror On The Terms And Conditions Prior To Execution Of The Resulting Contract/agreement On Behalf Of The Government. Be Advised That Only A Contracting/agreements Officer Has The Authority To Enter Into, Or Modify, A Binding Contract/agreement On Behalf Of The United States Government. 5.1 Prototyping this Cso May Result In The Award Of Prototype Projects, Which Include Not Only Commercially Available Technologies Fueled By Commercial Or Strategic Investment, But Also Concept Demonstrations, Pilots, And Agile Development Activities That Can Incrementally Improve Commercial Technologies, Existing Government-owned Capabilities, And/or Concepts For Broad Defense And/or Public Application. The Government Reserves The Right To Award A Far Part 12 Contract Or An Other Transaction (ot) Under 10 U.s.c. 4022 Agreement (including An Ot For A Prototype Project And A Follow-on Ot Or Contract For Production), Or A No Award At All. Calls Issued Under This Cso Constitute Competitive Procedures. Aflcmc May Competitively Award Ots For Prototype Projects That Provide For The Award Or A Follow-on Production Contract Or Ot For Production To Participants In The Ot For Prototype Projects Without The Use Of Further Competitive Procedures, If The Participant In The Ot For Prototype Projects Successfully Completes The Prototype Project, As Permitted By 10 Usc 4022(f). 5.1.1 Iterative Prototyping a Contract Or Ot For A Prototype Awarded Under This Cso Shall Allow For An Iterative Prototyping Process. An Iterative Prototyping Process Will Allow The Government To Modify, By Mutual Agreement, The Scope Of A Prototype Contract Or Ot To Allow For The Adaptation And Modification Of The Technology Being Prototyped To Meet Additional Unique And Discrete Purposes/mission Sets. The Sequential Prototype Iterations May Result In A Separate Prototype Project Rather Than A Modification Of The Original Prototype Contract Or Ot. These Additional Unique And Discrete Purposes/mission Sets Can Be Generated By Aflcmc Or Originate Within Any Organization That Aflcmc Supports. 5.1.2 Successful Completion Of A Prototype a Prototype Project Is Complete Upon The Written Determination Of The Appropriate Approving Official (program Manager And Contracting/agreements Officer) For The Matter In Question That The Efforts Conducted Under A Prototype Contract Or Ot: (1) Met The Key Technical Goals Of A Project; (2) Met The Metrics Incorporated Into The Prototype Contract Or Ot; Or (3) Accomplished A Particularly Favorable Or Unexpected Result That Justifies The Transition To A Production Contract Or Ot. Furthermore, Prior To Successful Completion Of A Prototype Project Under This Cso, The Government Can Transition Any Aspect Of The Prototype Project Determined To Provide Utility Into Production While Other Aspects Of The Prototype Project Have Yet To Be Completed. 5.1.3 Follow-on Production Of A Prototype after Award Of A Prototype Using Ot Authority, The Government And Vendor May Negotiate A Follow-on Contract Or Ot For Production Or Solution Integration With Or Without Further Competition. Any Concept/technology/solution Successfully Proven Through A Prototype Ot Can Be Transitioned To A Production Contract. The Government Reserves The Right To Award A Follow-on Contract Or Ot Before The Prototype Is Compete, Under Competitive Procedures As Provided In 10 U.s.c. 4022. any Call Posted By The Government Under This Cso Could Result In The Potential Award Of A Follow-on Production Or Solution Integration Contract Or Ot. the Government Reserves The Right To Extend The Performance To All, Some Or None Of The Selected Solutions And Decisions Will Be Made Based On The Availability Of Government Funds. 5.2 Other Transaction Agreements (otas) Specifics in Accordance With 10 U.s.c. 4022(c), If An Agreement For A Prototype Is Utilized And If That Agreement Provides For Payments In A Total Amount In Excess Of $5m, The Agreement Will Include A Mandatory Clause That Provides For The Comptroller General The Ability To Examine The Records Of Any Party To The Agreement Or Any Entity That Participates In The Performance Of The Agreement. The $5m Amount Includes The Base Agreement Plus Any Options. additionally, To Enter Into An Ot For A Prototype Agreement Under 10 U.s.c. 4022, One Of The Following Conditions Must Be Met: there Is At Least One Nontraditional Defense Contractor Or Nonprofit Research Institution Participating To A Significant Extent In The Prototype Project. all Significant Participants Other Than The Federal Government Are Small Business Concerns Or Nontraditional Defense Contractors. parties To The Transaction Other Than The Federal Government Must Pay At Least One Third Of The Prototype Total Cost. the Senior Procurement Executive Determines That Exceptional Circumstances Justify The Use Of An Ot To Provide An Innovative Business Arrangement Not Feasible Under A Contract Or To Expand The Defense Supply Base In A Manner Not Practical Under A Contract. all Otas Awarded Under This Cso Will Contain Prohibitions On The Use Of Certain Telecommunications Devices In Accordance With Dfars 52.204-25. Further Specifics And Requirements As It Relates To Ots May Be Applicable And Included In Subsequent Calls Published Under This Cso. 6.0 Closed Calls this Cso Will Have Close Calls That Consist Of Either A One-step Or Two-step Process, Which Will Be Specified In Each Individual Call. For A One-step Call, Only Proposals Will Be Solicited. For A Two-step Call, White Papers Will Be Solicited First And Then, Consistent With This Section, Subsequent Requests For Proposals May Follow After The Government Reviews The White Paper. any Part Of This Process May Be Modified Or Altered By Aflcmc In The Calls Or Through An Amendment To This Cso. It Is Important To Note That At No Stage Is Aflcmc Obligated To Make Any Awards And All Awards Are Subject To The Availability Of Funds And Successful Negotiations. The Government Is Not Responsible For Any Monies Expended By Vendors Prior To The Issuance Of Any Contract/agreement Award. 6.1 One-step Closed Call Process 6.1.1 Call Published aflcmc Intends On Publishing A Call Via An Amendment To This Cso. The Call Will Specifically State The Cso Call Type (closed, One-step). This Call Will Provide A Required Date And Time For Submission Of The Proposal. The Call Would Also Detail The Specific Areas Of Interest Being Solicited For, Required Proposal Content, Evaluation Criteria And Detailed Requirements Unique To That Particular Call. 6.1.2 Proposals Received proposals That Are Received On Time Will Be Evaluated Consistent With The Evaluation Criteria Identified Within The Call. After This Technical Review Is Complete, Aflcmc Will Notify Each Prospective Vendor As To Whether Their Proposal Was Selected To Proceed To The Contract Negotiations And Fact-finding Stage. 6.1.3 Contract Negotiations And Fact Finding if A Vendor Is Notified That It Has Been Selected To Proceed To The Next Stage, Then Contract Negotiations And Fact-finding Will Occur. This Includes Contract Formation, Scope, Cost/price And Any Other Terms And Conditions The Contracting/agreements Officer Requires Discussion. It Is Important To Note That At This Stage Aflcmc Is Not Required To Make An Award, Which Is Expressly Contingent Upon Successful Negotiation Of Cost/price, Terms And Conditions And The Availability Of Funds. 6.1.4 Award Decision after Contract Negotiations And Fact-finding Are Complete, Aflcmc Will Render A Decision(s) Whether Or Not To Enter Into A Contract/agreement With The Prospective Vendor. 6.2 Two-step Closed Call Process 6.2.1 Call Published aflcmc Would Publish A Call Via An Amendment To This Cso. The Call Would Specifically State That The Cso Call Type Is A Two-step, Closed Call. This Call Will Provide A Specific State And Time When Prospective Vendors May Submit Their White Papers. The Call Would Also Detail The Specific Areas Of Interest Being Solicited For, Required White Paper Content, Evaluation Criteria And Details Any Other Requirements Unique To That Particular Call. 6.2.2 White Papers Received aflcmc Will Review Submitted White Papers In Accordance With The Evaluation Criteria Specified In The Call. If A Vendor’s White Paper Is Evaluated Favorably By Aflcmc, The Government Will Send Initially Selected Vendors A Request For Proposal (rfp). Invited Vendors Will Proceed To Preparing And Submitting A Proposal For Evaluation. Additional Details Will Be Included Within The Rfp. 6.2.3 Incorporate Sections 6.1.2-6.1.4 after The Submission Of The White Papers And Issuance Of Rfps To Favorably Evaluated White Papers, The Remaining Process Is The Same As The One-step, Closed Call. Therefore, Sections 6.1.2, 6.1.3 And 6.1.4 Are Hereby Incorporated By Reference. 7.0 Open Period Calls this Cso May Have Open Period Calls That Consist Only Of A Two-step Process. For This Call Type, The Process Will Mirror The Process Articulated In 6.2 Above; However, With The Important Distinction That White Papers Will Be Accepted At Any Time During The Stated Time Period On The Call. This Is In Contrast To A Closed Call Where All Proposals Are Required To Be Submitted At A Specific Date And Time Together And Follow A Standard Timeline For All Participants. For Open Period Calls, The Timelines Are Usually Less Structured And Broader In Nature. Typical Turn-around Times That Vendors Can Expect Are Usually Stated In The Call. Aflcmc Reserves The Right To Modify Or Alter Any Of These Instructions In Each Individual Call. 8.0 Evaluation Criteria the Evaluation Criteria For White Papers And Proposals Will Be Explicitly Detailed In Each Individual Call. Solutions Will Be Evaluated On The Basis Of The Merit Of The Proposed Concept In Addressing The Areas Of Interest And Not Against Other Vendor’s Solution Briefs Submitted In Response To The Same Area Of Interest. disclaimer: No Proposals Or White Papers Are Being Requested At This Time. Those Will Be Requested Via Calls Published Under The Cso Solicitation. 9.0 General Proposal Information 9.1 Proposal Content below Is The Typical Structure And Required Volumes For Proposal Submission. Aflcmc Reserves The Right To Alter Or Change The Structure And Required Content For Each Proposal Submission As Specified In A Particular Call. title Page (does Not Count Against Page Limit) Including Company Name, Cage Number (if Applicable), Title, Point Of Contact Name, Date, Email, Address, Phone, Organization/office Symbol (if Applicable). Identify If You Or A Proposed Subcontractor Are A Small Business Such As 8(a), Small, Disadvantaged Business, Woman-owned Business, Hubzoned Small Business, Veteran-owned Business, Service Disabled Veteran Owned Business, Historically Black College Of University And Minority Institution. Identification Of Potential Sponsor(s) Organizations. volume 1: Technical Volume: This Will Typically Contain A Page Limit And Require Specific Technical Details The Government Requires All Prospective Vendors To Address. volume 2: Cost Volume: This Section Is Where Vendors Shall Detail The Proposed Cost By Breaking Down The Overall Proposed Price Into Specific Cost Categories (ex. Direct Labor, Overhead, Direct Materials, Other Direct Costs, Profit). The Government Reserves The Right To Specify A Cost Volume Format In Any Particular Call. 9.2 Proprietary Information information Constituting A Trade Secret, Commercial Or Financial Information, Confidential Personal Information, Or Data Affecting National Security Must Be Clearly Marked. It Shall Be Treated In Confidence To The Extent Permitted By Law. This Restriction Does Not Limit The Government’s Right To Use Information Contained If It Is Obtained From Another Source Without Restriction. Aflcmc Assumes No Liability For Disclosure Or Use Of Unmarked Data And May Use Or Disclose Such Data For Any Purpose. If A Vendor Is Awarded A Contract As A Result Of Or In Connection With The Submission Of Proprietary Data In The Proposal, The Government Shall Have The Right To Duplicate, Use Or Disclose The Data To The Extent Provided In The Resulting Contract/agreement. proposals Containing Data That Is Not To Be Disclosed To The Public For Any Purpose Or Used By The Government Except For Evaluation Purposes Shall Include The Following Sentences In Accordance With Far 52.215-1(e)(1) And (2) On The Cover Page: “this Proposal Includes Data That Shall Not Be Disclosed Outside The Government And Shall Not Be Duplicated, Used, Or Disclosed—in Whole Or In Part – For Any Purpose Other Than To Evaluate This Proposal. If, However, A Contract Is Awarded To This Offeror As A Result Of – Or In Connection With – The Submission Of This Data, The Government Shall Have The Right To Duplicate, Use, Or Disclose The Data To The Extend Provided In The Resulting Contract. This Restriction Does Not Limit The Government’s Right To Use Information Contained In This Data If It Is Obtained From Another Source Without Restriction. The Data Subject To This Restriction Are Contain In Sheets [insert Numbers Or Other Identification Of Sheets].” each Restricted Data Sheet Should Be Marked As Follows: use Or Disclose Of Data Contained On This Sheet Is Subject To The Restriction On The Title Page Of This Proposal. 9.3 Classified Proposals classified Whitepapers/proposals Will Not Be Accepted Under This Cso Unless Otherwise Stated In The Call. If Topics Require Classified Work, The Proposing Vendor Must Have A Facility Clearance In Order To Perform The Work. 9.4 Security security Classification Will Be Determined For Each Call/award. If Classified Data Will Be Accessed Or Generated, A Facility And Storage Clearance, At The Required Classification Level, Will Be Required And The Proposal Will Discuss Appropriate Personnel And Facility Clearances. if A Vendor Has Any Reason To Believe Their Concept May Reference Ideas Or Operations That Require Special Protection, The Vendor Should Immediately Contact The Contracting/agreements Officer For Further Instruction. additionally, If A Dd254 Is Applicable For A Call/award, Vendors Must Verify Their Cognizant Security Office Information Is Current With Defense Security Service (dss). 9.5 Promotional Material promotional And Non-project Related Discussion Is Discouraged, And Additional Information Provided Via Universal Resource Locator (url) Links Or On Computer Disks, Cds, Dvds, Video Tapes Or Any Other Medium Will Not Be Accepted Or Considered In The Proposal Evaluation Unless Otherwise Directed By The Call Or The Contracting/agreements Officer. This Also Means That Unnecessarily Elaborate Brochures Or Proposals Are Not Desired. 9.6 Small Business far-based Contracts Awarded Pursuant To This Cso Shall Include Far 52.219-8, Utilization Of Small Business Concerns (oct 2018). Far-based Contract Awarded Pursuant To This Cso Which Meet Far Subpart 19.7 Criteria For Small Business Subcontracting Plans Shall Include Far 52.219-9, Small Business Subcontracting Plan (march 2020). vendors Shall Address Plans To Comply With These Requirements As Part Of Their Proposals If Seeking Ots Which Provide For Follow-on Non-competitive Production Contracts. Vendors Not Seeking Either Instrument In The Preceding Sentence Shall Clearly State So As Part Of Their Proposal And Shall Address These Requirements As Part Of The Competition For Follow-on Production Contracts. In The Event That Any Follow-up Production Contracts Are Required To Have Small Business Subcontracting Plans And Are Negotiated Using Far 15, Dfars 215.304(c) Small Business Participation Plan Shall Be Required. 9.7 Export-controlled Items depending On The Proposal, It May Be Subject To Export Control (international Traffic In Arms (itar) 22 Cfr 120-131, Or Export Administration Regulations (ear) 15 Cfr 710-774). If The Effort Is Subject To Export Controls, Then A Certified Dd Form 2345, Military Critical Technical Data Agreement, Will Be Required To Be Submitted With Proposals. Dfars 252.225-7048, “export Controlled Item (jun 2013)” Clause Shall Be Contained In All Resulting Contracts. 9.8 Data Rights all Proposal Submissions Shall Include Data Rights Assertions, If Applicable. This Will Be An Essential Element Of Each Proposal Submission. aflcmc Reserves The Right To Negotiate Data Rights As Part Of The Contracting/agreement Process. Additionally, Each Call May Have Specific Data Rights Considerations Associated With It. Should This Be The Case, The Specific Rights Aflcmc Is Requesting Will Be Detailed In Each Call. Aflcmc Also Reserves The Right To Tailor The Data Management Approach For Each Individual Effort Based On The Needs For Each Situation. 9.8.1 Far Part 12 Considerations in Accordance With Dfars 227.7102-1, Aflcmc Seeks To Acquire The Technical Data That Is Customarily Available On A Commercial Basis. As A Result, Dfars Clauses 252.227-7015 And 252.227-7037 Will Be Included On Each Far Part 12 Contract Awarded As A Result Of This Cso Or Any Of Its Calls. If Additional Data Rights Are Considered Warranted, Aflcmc Reserves The Right To Negotiate These With Prospective Vendors As Part Of The Contracting Process. if The Government Pays For Any Portion Of The Development Costs, Dfars 252.227-7013 Will Be Included To Govern The Associated Technical Data For The Portion Of The Commercial Items That Was Developed Using Government Funds. For The Portion Of Commercial Items That Was Developed Exclusively At Private Expense, Dfars 252.227-7015 Will Still Govern The Technical Data To The Extent Is Commercial. companies Whose Effort Originated Under The Sbir Program Will Maintain Standard Sbir Data Rights In Accordance With Dfars 252.227-7018 (class Deviation 2020-o0007). additional Clauses May Be Applicable Depending On The Technology And Requirements Associated With It. 10.0 Other Information 10.1 Unique Item Identification for Hardware Deliverables, Item Unique Identification In Accordance With Dfars 252.211-7003 May Be Required. Vendors May Contact The Contracting/agreements Officer For Additional Information. 10.2 Foreign-owned Businesses foreign-owned Businesses May Independently Submit A Solution Or Do So As Part Of A Teaming Agreement With One Or More United States-owned Businesses. However, The Ability To Obtain A Contract/agreement Based Upon A Submission May Depend Upon The Ability For The Foreign-owned Business To Obtain Necessary Clearances And Approvals To Obtain Prescribed Information. 10.3 Within Scope Modifications potential Vendors Are Advised That Awards Resulting From The Calls Under This Cso May Be Modified During The Performance To Make Within Scope Changes. Only A Contracting/agreements Officer Can Legally Bind A Contract/agreement Modification On Behalf Of The United States Government. 10.4 Non-government Advisors And Source Selection Information non-government Advisors May Participate In The Evaluation Of All Submissions And Shall Have A Signed Non-disclosure Agreement (nda) With The Government. Non-governmental Advisors May Also Serve In Administrative And Assistance Support Capacities. The Government Understands That Information Provided In Response To This Cso Is Presented In Confidence And May Contain Trade Secrets Or Commercial Or Financial Information, And It Agrees To Protect Such Information From Unauthorized Disclosure To The Maximum Extent Permitted Or Required By Law. aflcmc Will Treat All Submissions To Calls Published Against This Cso As Source Selection Information. During The Evaluation Process, Submissions May Be Handled By Non-government Advisors For Administrative Purposes And/or Technical Evaluations. All Government Support Contractors Are Bound By Appropriate Ndas. Submissions Will Not Be Returned Unless Otherwise Stated In The Call. 10.5 Multiple White Paper/proposal Submissions vendors May Submit Multiple Submissions In Response To Any Single Area Of Interest Detailed In Each Call If Each Submission Represents A Separate And Distinct Concept. However, For Each Individual Submission, Prospective Vendors May Only Address One Distinct Technical Solution Per Submission Unless Otherwise Permitted In The Individual Call. 10.6 Fraud And False Statements knowingly And Willfully Making False, Fictitious, Or Fraudulent Statements Or Representations May Be A Felony Under The Federal Criminal False Statement Act (18 U.s.c. 1001) Punishable By A Fine Or Up To $10,000, Up To Five Years In Prison, Or Both. 10.7 Duns And Sam Registration vendors Must Have A Unique Entity Identifier (uei) And Must Register In The System For Award Management (sam) Prior To Receiving An Award Or Agreement. Vendors Must Not Be Suspended Or Debarred From Award By The Federal Government Nor Be Prohibited By Presidential Executive Order And/or Law From Receiving An Award. 10.8 Wawf Registration as Specified In A Particular Call, Vendors May Be Required To Be Registered In The Prescribed Government Invoicing System (wide Area Work Flow). If Not Specified, The Call Will Explain How Invoicing Will Be Handled. 10.9 Supplier Performance Risk System (sprs) in Order To Receive A Dod Contract, Every Vendor Will Be Required To Perform A Basis Nist Sp 800-171 Dod Assessment. That Process Is Described Here. once The Basic Nist 800-171 Dod Assessment Is Complete, Each Contractor Will Need To Follow The Instructions Here To Enter The Results In Sprp On The Piee Website. 10.10 Cost Sharing Or Matching cost Sharing Or Matching Will Be Considered Based On The Solutions Proposed And Details Associated With Each Call. Aflcmc Has Final Decision Authority On Whether To Enter Into A Cost Sharing Or Matching Agreement.
Closing Date8 Feb 2028
Tender AmountRefer Documents 

Koleje Wielkopolskie Sp Z O O Tender

Software and IT Solutions...+2Electrical and Electronics, Electrical Works
Poland
Details: I. Subject of the Proceedings: 1. Description of the Subject of the Order: - Knorr-bremse I89033 Weighing Valve - 2 pcs. 2. The above-mentioned assortment must meet the following requirements: be new and free from defects, original, not encumbered by the rights of third parties. 3. Accompanying Documentation: With Delivery Required Declaration 2.1 of Conformity of the Goods, Issued by Its Manufacturer Based on the PN En 10204:2006 Standard or Quality Document Issued by Its Manufacturer Based on an Equivalent Standard (coc) 4. Having regard to the provisions of Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions on the Certification System of Entities in Charge of Maintenance of Vehicles in Pursuance of Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws EU L. of 2019, p. 139, as amended; Hereinafter "Regulation 2019/779"), the Ordering Party, as the Entity Responsible for Maintenance of Vehicles Within the Meaning of Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on Railway Safety (Recast) (Journal of Laws of the EU, No. 138, 2016, p. 102, as amended), Taking into Account the Impact of the Correct Execution of the Order on the Safety of Railway Traffic, Requires that the Subject Matter of the Order Be Executed by Contractors Having an Appropriate and Documented Maintenance and Management System Within the Meaning of Point 9.2 Letter B) of Annex Ii to Regulation 2019/779 (e.g. ISO 9001:2015, Iris). Confirmation That the Subject of the Order Will Be Implemented by Contractors Having an Appropriate and Documented Maintenance and Management System Is the Submission of the Declaration Referred to in Chapter Iv Point 4. 5. Offer Evaluation Criterion: 99% Price, 1% Completion Date. Ii. Conditions of Order Execution: 1. Completion Date The order completion date expected by the Ordering Party is 7 Business Days. The Ordering Party indicates that it allows the submission of offers with a deadline longer than 7 Business Days. - The unit "days" specified in the completion date criterion should be understood as Business Days. - Hours of implementation – 7:00 a.m. to 3:00 p.m. 2. Principles of Delivery and Unloading of Goods – In Accordance with the Owd 3. Place of Delivery: - Koleje Wielkopolskie Sp. Z Oo, Ul. Kolejowa 3 /rolling stock maintenance hall Zbąszynek/, 66-210 Zbąszynek, Rolling Stock Maintenance Point Zbąszynek The Contractor, No Later Than 12 Hours Before Starting to Execute the Order, Is Obliged to Confirm the Delivery Date of the Goods, Including the Delivery Time. 4. Delivery Method: One-off Delivery, The Price Should Include the Cost of Delivery and Unloading. 5. Payment Deadline – In accordance with the T&Cs; (payment deadline 30 Days from the Invoice Issue Date). The Buyer Accepts the Issuance and Delivery of Electronic Invoices by the Seller, In Pursuant to Art. 106n of the Act of 11 March 2004 on Tax on Goods and Services (i.e. Journal of Laws of 2022, item 931, as amended; hereinafter "VAT Act"). When issuing an Electronic Invoice, the Seller is Obliged to prepare it in Pdf format. - In the case of issuing an Electronic Invoice, the Seller is Obliged to deliver it to the Buyer to the e-mail address: Faktury@koleje-wielkopolskie.com.pl. - In the case of issuing invoices in paper form, the Contractor is Obliged to deliver them only to the following address: Koleje Wielkopolskie Sp. Z Oo Ul. Składowa 5, 61-897 Poznań In the case of delivering a paper invoice to a different address, the invoice may be deemed as undelivered, which may result in delays in its processing and payment. 6. Warranty Terms – In accordance with the Owd; 7. Deadline for Removing Defects Under Warranty – In accordance with the Owd; 8. Contractual Penalties – In accordance with § 7 of the Owd. At the same time, the Ordering Party informs that the total value of contractual penalties cannot exceed 20% of the remuneration. Iii. Course of the procedure: the Ordering Party informs that the procedure is conducted in two stages: A) Stage I - Submission of offers that will take part in Stage II, B) Stage II - Electronic bidding - the bidding will start automatically after the end of Stage I and will last 15 minutes, as well as the extra time - sub-stage of Stage II, the conditions of which are precisely described in the procedure settings on the Purchasing Platform. Each extra time lasts 3 minutes - it starts if another offer (bid) is submitted correctly within the last 3 minutes of the procedure. Contractors accepted by the Ordering Party, who do not submit their offer correctly at the stage of submitting offers (stage I), will be automatically asked out of the further stages of the procedure. The Ordering Party grants a confirmation of the execution of the Order by placing information on the Purchasing Platform about the selection of the most advantageous offer. The order is awarded at the moment referred to in the previous sentence. The Ordering Party is entitled to withdraw from the award of the order at any time. Iv. Contractor's declarations: The Ordering Party informs that participation in the subject procedure is equivalent to submitting the following declarations: 1. I declare that I have fulfilled the information obligations provided for in Art. 13 or Art. 14 of the GDPR*) towards Natural Persons from whom I have directly or indirectly obtained personal data in order to apply for the award of a public contract in this procedure. *Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ EU L. 119 of 04.05.2016, p. 1). 2. I declare that I consent to the processing of my personal data provided by me voluntarily to the Ordering Party. Information Clause from Art. 13 of the GDPR - has been posted on the Eb2b Purchasing Platform in the "information obligation" tab. 3. I declare that the price offer on the Purchasing Platform was submitted by a person authorized to represent the Contractor. 4. I declare that the Subject Order will be Performed by Contractors Having an Appropriate and Documented Maintenance and Management System within the meaning of Point 9.2 Letter B) of Annex Ii to Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions concerning the Certification System of Entities in Charge of Maintenance of Vehicles in Accordance with Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws of the EU, 2019, p. 139, as amended). 5. I declare that the Subject Order will be Performed by Contractors Not Subject to Exclusion Under Art. 7 Sec. 1 of the Act of April 13, 2022, on Specific Solutions for Counteracting Support for Aggression Against Ukraine and Serving the Protection of National Security (consolidated text: Journal of Laws of 2023, item 129, as amended) V. Additional Information: The Proceedings Are Conducted in Accordance with the Provisions of § 25 of the Regulations for the Award of Sub-threshold Sectoral Contracts, Available to Contractors on the Ordering Party's Website https://koleje-wielkopolskie.com.pl/. Due to the Impact of the Execution of the Order on Transport Safety, the Provisions of § 5 Section 2 and § 22 of the Regulations Apply to the Proceedings. The General Terms and Conditions of Supply of Koleje Wielkopolskie Sp. Z Oo Available On The Ordering Party's Website https://bip.koleje-wielkopolskie.com.pl/zamowienia-publiczne/ogolne-warunki-dostaw/ Including the provisions of § 3 Sec. 7 of the General Terms of Supply of Koleje Wielkopolskie Sp. Z Oo Information Clause Under Art. 13 of the GDPR – Has Been Posted on the Eb2b Purchasing Platform In the “information obligation” tab. Please Send Any Questions Regarding the Proceedings Through the Purchasing Platform. Technical Assistance Can Be Obtained At The Telephone Number Located In The Footer At The Bottom Of The Page. A Contractor is excluded from the Proceedings On The Basis Of The Premises Indicated In § 7 Sec. 1 Points 1-4, 6 of the Regulations. "The ordering party is entitled to request the contractors to submit an Additional Offer Within The Meaning Of §2 Sec. 10 of the Regulations". Pursuant to Art. 7 Sec. 1 of the Act of 13 April 2022 on Special Solutions for Counteracting Support for Aggression Against Ukraine and for Protecting National Security (consolidated text: Journal of Laws of 2023, item 129, as amended; hereinafter referred to as the "Sanctions Act"), the following Contractor is excluded from this Public Procurement Procedure: 1) Listed on the Lists Specified in Council Regulation (EC) No 765/2006 of 18 May 2006 concerning restrictive measures in connection with the situation in Belarus (OJ EU L 134 of 20.05.2006, p. 1, as amended; hereinafter referred to as "Regulation 765/2006") and Council Regulation (EU) No. 269/2014 of 17 March 2014 On Restrictive Measures In Respect Of Actions Undermining Or Threatening The Territorial Integrity, Sovereignty And Independence Of Ukraine (EU Official Journal L. 78 of 17 March 2014, p. 6, As Amended; hereinafter referred to as "Regulation 269/2014") Or Inscribed On The Basis Of The Decision On Inclusion On The List Of The Measure Referred To In Art. 1 Item 3 Of The Sanctions Act; 2) Whose Beneficial Owner within the meaning of the Act of 1 March 2018 on Combating Money Laundering and Terrorism Financing (Journal of Laws of 2022, items 593, 655, 835, 2180 and 2185) is a Person included in the lists specified in Regulation 765/2006 and Regulation 269/2014 or entered on the List or being such a Beneficial Owner from 24 February 2022, provided that He or she was entered on the List on the basis of the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Item 3 of the Sanctions Act; 3) Whose Parent Entity within the meaning of Art. 3 Sec. 1 Point 37 of the Act of 29 September 1994 on Accounting (Journal of Laws of 2021, item 217, 2105 and 2106 and of 2022, item 1488), is an Entity Listed on the Lists Specified in Regulation 765/2006 and Regulation 269/2014 or Entered on the List or Being Such a Parent Entity from 24 February 2022, Provided That It Has Been Entered on the List Based on the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Point 3 of the Sanctions Act.
Closing Date8 Jan 2025
Tender AmountNA 

National Road and Highway Directorate Tender

Software and IT Solutions
Corrigendum : Closing Date Modified
Poland
Details: I. Subject of the Proceedings: 1. Description of the Subject of the Order: - Roof for A2003a Siroco Fan - Aluminum For En 76 - 4 pcs. (photo attached) 2. The above-mentioned The assortment must meet the following requirements: Be new and free from defects, Original, Not encumbered by third party rights, 3. Accompanying documentation: None Directive of the European Parliament and of the Council (EU) 2016/798 and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws of the EU L. of 2019, p. 139, as amended; hereinafter "Regulation 2019/779"), Employer as the Entity Responsible for Vehicle Maintenance within the meaning of the Directive of the European Parliament and of the Council (EU) 20 16/798 of May 11, 2016 on Railway Safety (Recast) (Journal of Laws of the European Union, L. of 2016, No. 138, p. 102, as amended), Considering the impact of proper execution of the Order on Railway Traffic Safety, requires that the Subject of the Order be implemented by Contractors with an appropriate and documented Maintenance and Management System Within the meaning of point 9.2 lit. B) of Annex Ii to Regulation 2019/779 (e.g. ISO 9001:2015, Iris). To confirm that the Subject of the Order will be implemented by Contractors with an appropriate and documented maintenance and management system, it is necessary to submit a statement referred to in Chapter IV, Item 4. 5. Tender Evaluation Criteria: Price 99%, 1% Completion Time Ii. Terms of Order Execution: 1. Execution Date - Order Execution Date Expected by the Ordering Party 7 Working Days. The Ordering Party indicates that it allows the submission of Tenders with a deadline longer than 7 Business Days. - The unit "days" defined in the Criterion of the Execution Date should be understood as Business Days - Execution Hours - 8:00 am to 2:00 pm 2. Rules for the Delivery and Unloading of Goods - In accordance with the GTC 3. Place of Delivery: Koleje Wielkopolskie Sp. z o. o. Ul. Kolejowa 3, 66-210 Zbąszynek, Zbąszynek Rolling Stock Maintenance Point. The Contractor, no later than 12 hours before commencing the execution of the order, is obliged to confirm the date of delivery of the goods, including the time of delivery. 4. Method of Delivery: One-time Delivery, Price Should Include the Cost of Delivery and Unloading. 5. Payment Date - In accordance with the GTD; (payment deadline 30 Days From Invoice Issue) The Buyer accepts the issuance and delivery of electronic invoices by the Seller, in accordance with Article 106n of the Act of March 11, 2004 on Goods and Services Tax (i.e. Journal of Laws of 2022, item 931, as amended; hereinafter referred to as the "VAT Act"). When issuing an electronic invoice, the seller is obliged to prepare it in pdf format. In the case of issuing an electronic invoice, the Seller is obliged to deliver it to the Buyer to the following e-mail address: Faktury@koleje-wielkopolskie.com.pl. 6. Guarantee conditions - In accordance with the GTC; 7. Deadline for Removing Defects Under the Guarantee - In accordance with the GTD; 8. Contractual penalties - Pursuant to § 7 of the GTD. iii. The course of the Proceedings: The Ordering Party informs that the Proceedings are conducted in two stages: A) Stage I - Bid submission, B) Stage II - Electronic Bidding - Bidding will start automatically after the end of Stage I and will last 15 minutes, and Extra Time - Sub-stage of Stage II, the conditions of which are precisely described in the Proceeding Settings on the Purchasing Platform. Each Overtime Lasts 3 Minutes - Starts if Within the Last 3 Minutes of the Proceedings, Another Bid (proceeding) is submitted correctly. Contractors approved by the Employer who fail to submit a Proposal correctly at the Bid Submission Stage (and Stage) will be automatically removed from further stages of the Proceedings. The Ordering Party grants approval for the Order by placing on the Purchasing Platform Information about the Selection of the Most Advantageous Offer. With the moment referred to in the preceding sentence, the Order is awarded. The Ordering Party is entitled to withdraw from awarding the Order at any time. IV. Contractor's declarations: The Contracting Entity informs that participation in the said Proceedings is tantamount to submitting the following declarations: 1. I declare that I have fulfilled the information obligations provided for in Article 13 or Article 14 of the GDPR*) towards the Natural Persons from whom I obtained personal data directly or indirectly in order to apply for a public procurement in this Procedure. *Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ L 119 Z 04.05 .2016, p. 1). 2. I declare that I consent to the processing of my personal data provided by me voluntarily to the Ordering Party. Information Clause With Art. 13 of the GDPR - Has been posted on the Eb2b Purchasing Platform in the "Information Obligation" tab. 3. I declare that the Price Offer on the Purchasing Platform was submitted by the Person Authorized to Represent the Contractor. 4. I declare that the Contract in question will be implemented by Contractors who have an appropriate and documented maintenance and management system within the meaning of point 9.2 lit. B) of Annex Ii to the Commission Implementing Regulation (eu) 2019/779 of 16 May 2019 laying down detailed provisions on the Certification System of Entities in Charge of Vehicle Maintenance In accordance with Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws e. L. Z 2019 R. P. 139 As amended) 5. I declare that the Contract in question will be performed by Contractors who are not subject to exclusion under Art. U. Ue L. Z 2014, No. 229, p. 1, as amended) and on the basis of Art. 1 of the Act of April 13, 2022 on Special Solutions for Counteracting the Support of Aggression against Ukraine and for the Protection of National Security (i.e. Journal of Laws of 2023, item 129, as amended) V. Additional information: Proceedings conducted in accordance with the provisions of § 25 of the Regulations for the award of sub-threshold sectoral contracts, available to Contractors On the Ordering Party's website https://koleje-wielkopolskie.com.pl/. Due to the impact of the execution of the Order on the Safety of Transport, within the Proceedings, the provisions of § 5 Sec. 2 And § 22 of the Regulations. The General Terms and Conditions of Delivery of Koleje Wielkopolskie Sp. Z O.O. Available on the Ordering Party's website https://koleje-wielkopolskie.com.pl/. Including the provisions of § 3 Sec. 7 of the General Delivery Terms of Koleje Wielkopolskie Sp. z o.o. Information Clause With Art. 13 of the GDPR - Has been posted on the Eb2b Purchasing Platform in the "Information Obligation" tab. Please direct any questions regarding the Procedure via the Purchasing Platform. Technical Support can be obtained at the telephone number in the footer at the bottom of the page. Pursuant to Art. 7 Para. 1 of the Act of April 13, 2022 on Special Solutions for Counteracting the Support of Aggression against Ukraine and for the Protection of National Security (i.e. Journal of Laws of 2023, item 129, as amended; hereinafter referred to as the "Sanctions Act"), The Contractor is excluded from this Public Procurement Proceeding: 1) listed in Lists Specified in Council Regulation (EC) No. 765/2006 of 18 May 2006 Concerning Restrictive Measures Due to the Situation in Belarus (OJ L 134, 20.05.2006, p. 1, as amended; hereinafter "Regulation 765/2006") and Council Regulation (EU) No. 2 69/2014 of 17 March 2014 on restrictive measures with regard to actions undermining or threatening the territorial integrity, sovereignty and independence of Ukraine (Journal of Laws EU L 78 Z 17.03.2014, p. 6, as amended; hereinafter "Regulation 269/2014") Or ę On the basis of the decision on the entry on the List determining the application of the measure referred to in Art. 1 Item 3 of the Sanctions Act; 2) whose Ultimate Beneficiary within the meaning of the Act of 1 March 2018 on Counteracting Money Laundering and Terrorist Financing (Journal of Laws of 2022, items 593, 655, 835, 2180 and 2185) is the person listed in the lists specified in Regulation 765/2006 I Regulation 269/2014 or entered on the list or being such a real beneficiary from February 24, 2022, as long as it was entered on the list on the basis of a decision on entry on the list determining the application of the measure referred to in Article 1(3) of the Sanctions Act; 3) whose Parent Undertaking within the meaning of Art. 3 Sec. 1 point 37 of the Act of 29 September 1994 on Accounting (Journal of Laws of 2021, item 217, 2105 and 2106 and of 2022, item 1488), is an entity listed in the lists specified in Regulation 765/2006 and Regulation 269/2014 or in entered on the list or being such a Parent Company from February 24, 2022, provided that it was entered on the list on the basis of a decision on entry on the list determining the application of the measure referred to in Art. 1 Item 3 of the Sanctions Act. Pursuant to Article 5k of Council Regulation (EU) No. 833/2014 of July 31, 2014 concerning restrictive measures in connection with Russia's actions destabilizing the situation in Ukraine (Journal of Laws of the EU L. Z 2014 No. 229, p. 1, as amended; hereinafter "Regulation 833/2014"), Z The Contractor is excluded from this Public Procurement Procedure: 1) a Russian citizen, a natural person residing in Russia or a legal person, entity or body with its registered office in Russia; 2) A legal person, entity or body to which ownership rights, directly or indirectly, in more than 50% belong to Russian citizens or natural persons residing in Russia, or legal persons, entities or bodies based in Russia; 3) A natural or legal person, entity or body acting on behalf of or under the direction of the entity referred to in point 1) or 2) of this paragraph, and using Subcontractors, Suppliers or Entities whose abilities it depends on (if applicable), belonging to one of the above Categories of Entities, in the event that they account for more than 10% of the Order Value.
Closing Date10 Jan 2025
Tender AmountRefer Documents 

National Road and Highway Directorate Tender

Civil And Construction...+1Civil Works Others
Corrigendum : Closing Date Modified
Poland
Details: I. Subject of the Proceedings: 1. Description of the Subject of the Order: - Metal Cable Seal (for axle boxes) 1.5 Mm, numbered To Sa132/134/139/36wehd - 100 pcs. The assortment must meet the following requirements: Be new and free from defects, Original, Not encumbered by third party rights, 3. Accompanying documentation: None Directive of the European Parliament and of the Council (EU) 2016/798 and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws of the EU L. of 2019, p. 139, as amended; hereinafter "Regulation 2019/779"), Employer as the Entity Responsible for Vehicle Maintenance within the meaning of the Directive of the European Parliament and of the Council (EU) 20 16/798 of May 11, 2016 on Railway Safety (Recast) (Journal of Laws of the European Union, L. of 2016, No. 138, p. 102, as amended), Considering the impact of proper execution of the Order on Railway Traffic Safety, requires that the Subject of the Order be implemented by Contractors with an appropriate and documented Maintenance and Management System Within the meaning of point 9.2 lit. B) of Annex Ii to Regulation 2019/779 (e.g. ISO 9001:2015, Iris). To confirm that the Subject of the Order will be implemented by Contractors with an appropriate and documented maintenance and management system, it is necessary to submit a statement referred to in Chapter IV, Item 4. 5. Tender Evaluation Criteria: Price 99%, 1% Completion Time Ii. Terms of Order Execution: 1. Execution Date - Order Execution Date Expected by the Ordering Party 7 Working Days. The Ordering Party indicates that it allows the submission of Tenders with a deadline longer than 7 Business Days. - The unit "days" defined in the Criterion of the Execution Date should be understood as Business Days - Execution Hours - 8:00 am to 2:00 pm 2. Rules for the Delivery and Unloading of Goods - In accordance with the GTC 3. Place of Delivery: Koleje Wielkopolskie Sp. z o. o. Ul. Leśna 1d, 62-100 Wągrowiec, Wągrowiec Rolling Stock Maintenance Point. The Contractor, no later than 12 hours before commencing the execution of the order, is obliged to confirm the date of delivery of the goods, including the time of delivery. 4. Method of Delivery: One-time Delivery, Price Should Include the Cost of Delivery and Unloading. 5. Payment Date - In accordance with the GTD; (payment deadline 30 Days From Invoice Issue) The Buyer accepts the issuance and delivery of electronic invoices by the Seller, in accordance with Article 106n of the Act of March 11, 2004 on Goods and Services Tax (i.e. Journal of Laws of 2022, item 931, as amended; hereinafter referred to as the "VAT Act"). When issuing an electronic invoice, the seller is obliged to prepare it in pdf format. In the case of issuing an electronic invoice, the Seller is obliged to deliver it to the Buyer to the following e-mail address: Faktury@koleje-wielkopolskie.com.pl. 6. Guarantee conditions - In accordance with the GTC; 7. Deadline for Removing Defects Under the Guarantee - In accordance with the GTD; 8. Contractual penalties - Pursuant to § 7 of the GTD. iii. The course of the Proceedings: The Ordering Party informs that the Proceedings are conducted in two stages: A) Stage I - Bid submission, B) Stage II - Electronic Bidding - Bidding will start automatically after the end of Stage I and will last 15 minutes, and Extra Time - Sub-stage of Stage II, the conditions of which are precisely described in the Proceeding Settings on the Purchasing Platform. Each Overtime Lasts 3 Minutes - Starts if Within the Last 3 Minutes of the Proceedings, Another Bid (proceeding) is submitted correctly. Contractors approved by the Employer who fail to submit a Proposal correctly at the Bid Submission Stage (and Stage) will be automatically removed from further stages of the Proceedings. The Ordering Party grants approval for the Order by placing on the Purchasing Platform Information about the Selection of the Most Advantageous Offer. With the moment referred to in the preceding sentence, the Order is awarded. The Ordering Party is entitled to withdraw from awarding the Order at any time. IV. Contractor's declarations: The Contracting Entity informs that participation in the said Proceedings is tantamount to submitting the following declarations: 1. I declare that I have fulfilled the information obligations provided for in Article 13 or Article 14 of the GDPR*) towards the Natural Persons from whom I obtained personal data directly or indirectly in order to apply for a public procurement in this Procedure. *Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ L 119 Z 04.05 .2016, p. 1). 2. I declare that I consent to the processing of my personal data provided by me voluntarily to the Ordering Party. Information Clause With Art. 13 of the GDPR - Has been posted on the Eb2b Purchasing Platform in the "Information Obligation" tab. 3. I declare that the Price Offer on the Purchasing Platform was submitted by the Person Authorized to Represent the Contractor. 4. I declare that the Contract in question will be implemented by Contractors who have an appropriate and documented maintenance and management system within the meaning of point 9.2 lit. B) of Annex Ii to the Commission Implementing Regulation (eu) 2019/779 of 16 May 2019 laying down detailed provisions on the Certification System of Entities in Charge of Vehicle Maintenance In accordance with Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws e. L. Z 2019 R. P. 139 As amended) 5. I declare that the Contract in question will be performed by Contractors not subject to exclusion under Art. U. Ue. L. Z 2014, No. 229, p. 1, as amended) and on the basis of Art. 1 of the Act of April 13, 2022 on Special Solutions for Counteracting the Support of Aggression against Ukraine and for the Protection of National Security (i.e. Journal of Laws of 2023, item 129, as amended) V. Additional information: Proceedings conducted in accordance with the provisions of § 25 of the Regulations for the award of sub-threshold sectoral contracts, available to Contractors On the Ordering Party's website https://koleje-wielkopolskie.com.pl/. Due to the impact of the execution of the Order on the Safety of Transport, within the Proceedings, the provisions of § 5 Sec. 2 And § 22 of the Regulations. The General Terms and Conditions of Delivery of Koleje Wielkopolskie Sp. Z O.O. Available on the Ordering Party's website https://koleje-wielkopolskie.com.pl/. Including the provisions of § 3 Sec. 7 of the General Delivery Terms of Koleje Wielkopolskie Sp. z o.o. Information Clause With Art. 13 of the GDPR - Has been posted on the Eb2b Purchasing Platform in the "Information Obligation" tab. Please direct any questions regarding the Procedure via the Purchasing Platform. Technical Support can be obtained at the telephone number in the footer at the bottom of the page. Pursuant to Art. 7 Para. 1 of the Act of April 13, 2022 on Special Solutions for Counteracting the Support of Aggression against Ukraine and for the Protection of National Security (i.e. Journal of Laws of 2023, item 129, as amended; hereinafter referred to as the "Sanctions Act"), The Contractor is excluded from this Public Procurement Proceeding: 1) listed in Lists Specified in Council Regulation (EC) No. 765/2006 of 18 May 2006 Concerning Restrictive Measures Due to the Situation in Belarus (OJ L 134, 20.05.2006, p. 1, as amended; hereinafter "Regulation 765/2006") and Council Regulation (EU) No. 2 69/2014 of 17 March 2014 on restrictive measures with regard to actions undermining or threatening the territorial integrity, sovereignty and independence of Ukraine (Journal of Laws EU L 78 Z 17.03.2014, p. 6, as amended; hereinafter "Regulation 269/2014") Or ę On the basis of the decision on the entry on the List determining the application of the measure referred to in Art. 1 Item 3 of the Sanctions Act; 2) whose Ultimate Beneficiary within the meaning of the Act of 1 March 2018 on Counteracting Money Laundering and Terrorist Financing (Journal of Laws of 2022, items 593, 655, 835, 2180 and 2185) is the person listed in the lists specified in Regulation 765/2006 I Regulation 269/2014 or entered on the list or being such a real beneficiary from February 24, 2022, as long as it was entered on the list on the basis of the decision on entry on the list determining the application of the measure referred to in Article 1(3) of the Sanctions Act; 3) whose Parent Undertaking within the meaning of Art. 3 Sec. 1 point 37 of the Act of 29 September 1994 on Accounting (Journal of Laws of 2021, item 217, 2105 and 2106 and of 2022, item 1488), is an entity listed in the lists specified in Regulation 765/2006 and Regulation 269/2014 or in entered on the list or being such a Parent Company from February 24, 2022, provided that it was entered on the list on the basis of a decision on entry on the list determining the application of the measure referred to in Art. 1 Item 3 of the Sanctions Act. Pursuant to Article 5k of Council Regulation (EU) No. 833/2014 of July 31, 2014 concerning restrictive measures in connection with Russia's actions destabilizing the situation in Ukraine (Journal of Laws of the EU L. Z 2014 No. 229, p. 1, as amended; hereinafter "Regulation 833/2014"), Z The Contractor is excluded from this Public Procurement Procedure: 1) a Russian citizen, a natural person residing in Russia or a legal person, entity or body with its registered office in Russia; 2) a legal person, entity or body whose property rights directly or indirectly belong to Russian citizens or natural persons residing in Russia or legal persons, entities or bodies based in Russia in more than 50%; 3) A natural or legal person, entity or body acting on behalf of or under the direction of the entity referred to in point 1) or 2) of this section, and using subcontractors, suppliers or entities whose abilities it depends on (if applicable), belonging to one of the above categories of entities, in the event that they account for more than 10% of the value of the Order.
Closing Date15 Jan 2025
Tender AmountRefer Documents 

Koleje Wielkopolskie Sp Z O O Tender

Software and IT Solutions...+2Electrical and Electronics, Electrical Works
Poland
Details: I. Subject of the Proceedings: 1. Description of the Subject of the Order: - Micro-mesh Oil Filter B92794 For Sa 139 - 4 Pieces - Photo Attached 2. The Above-mentioned Assortment Must Meet the Following Requirements: Be New and Free from Defects, Original, Not Encumbered by the Rights of Third Parties. 3. Accompanying Documentation: With Delivery Required Declaration 2.1 of Conformity of the Goods, Issued by Its Manufacturer Based on the PN En 10204:2006 Standard or Quality Document Issued by Its Manufacturer Based on an Equivalent Standard (coc) 4. Having regard to the provisions of Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions on the Certification System of Entities in Charge of Maintenance of Vehicles in Pursuance of Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws EU L. of 2019, p. 139, as amended; Hereinafter "Regulation 2019/779"), the Ordering Party, as the Entity Responsible for Maintenance of Vehicles Within the Meaning of Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on Railway Safety (Recast) (Journal of Laws of the EU, No. 138, 2016, p. 102, as amended), Taking into Account the Impact of the Correct Execution of the Order on the Safety of Railway Traffic, Requires that the Subject Matter of the Order Be Executed by Contractors Having an Appropriate and Documented Maintenance and Management System Within the Meaning of Point 9.2 Letter B) of Annex Ii to Regulation 2019/779 (e.g. ISO 9001:2015, Iris). Confirmation That the Subject of the Order Will Be Implemented by Contractors Having an Appropriate and Documented Maintenance and Management System Is the Submission of the Declaration Referred to in Chapter Iv Point 4. 5. Offer Evaluation Criterion: 99% Price, 1% Completion Date. Ii. Conditions of Order Execution: 1. Completion Date The order completion date expected by the Ordering Party is 7 Business Days. The Ordering Party indicates that it allows the submission of offers with a deadline longer than 7 Business Days. - The unit "days" specified in the completion date criterion should be understood as Business Days. - Hours of implementation – 7:00 to 15:00 2. Principles of Delivery and Unloading of Goods – In Accordance with the Owd 3. Place of Delivery: - Koleje Wielkopolskie Sp. Z Oo Ul. Leśna 1 D, 62-100 Wągrowiec, Wągrowiec Rolling Stock Maintenance Point The Contractor, No Later Than 12 Hours Before Starting to Execute the Order, Is Obliged to Confirm the Delivery Date of the Goods, Including the Delivery Time. 4. Delivery Method: One-off Delivery, The Price Should Include the Cost of Delivery and Unloading. 5. Payment Deadline – In Accordance with the T&Cs; (payment deadline 30 Days from the Invoice Issue Date). The Buyer Accepts the Issuance and Delivery of Electronic Invoices by the Seller, In Accordance with Art. 106n of the Act of 11 March 2004 on Tax on Goods and Services (i.e. Journal of Laws of 2022, item 931, as amended; hereinafter "VAT Act"). When issuing an Electronic Invoice, the Seller is Obliged to prepare it in Pdf format. - In the case of issuing an Electronic Invoice, the Seller is Obliged to deliver it to the Buyer to the e-mail address: Faktury@koleje-wielkopolskie.com.pl. - In the case of issuing invoices in paper form, the Contractor is Obliged to deliver them only to the following address: Koleje Wielkopolskie Sp. Z Oo Ul. Składowa 5, 61-897 Poznań In the case of delivering a paper invoice to a different address, the invoice may be deemed as undelivered, which may result in delays in its processing and payment. 6. Warranty Terms – In accordance with the Owd; 7. Deadline for Removing Defects Under Warranty – In accordance with the Owd; 8. Contractual Penalties – In accordance with § 7 of the Owd. At the same time, the Ordering Party informs that the total value of contractual penalties cannot exceed 20% of the remuneration. Iii. Course of the procedure: the Ordering Party informs that the procedure is conducted in two stages: A) Stage I - Submission of offers that will take part in Stage II, B) Stage II - Electronic bidding - the bidding will start automatically after the end of Stage I and will last 15 minutes, as well as the extra time - sub-stage of Stage II, the conditions of which are precisely described in the procedure settings on the Purchasing Platform. Each extra time lasts 3 minutes - it starts if another offer (bid) is submitted correctly within the last 3 minutes of the procedure. Contractors accepted by the Ordering Party, who do not submit their offer correctly at the stage of submitting offers (stage I), will be automatically asked out of the further stages of the procedure. The Ordering Party grants a confirmation of the execution of the Order by placing information on the Purchasing Platform about the selection of the most advantageous offer. The order is awarded at the moment referred to in the previous sentence. The Ordering Party is entitled to withdraw from the award of the order at any time. Iv. Contractor's declarations: The Ordering Party informs that participation in the subject procedure is equivalent to submitting the following declarations: 1. I declare that I have fulfilled the information obligations provided for in Art. 13 or Art. 14 of the GDPR*) towards Natural Persons from whom I have directly or indirectly obtained personal data in order to apply for the award of a public contract in this procedure. *Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ EU L. 119 of 04.05.2016, p. 1). 2. I declare that I consent to the processing of my personal data provided by me voluntarily to the Ordering Party. Information Clause from Art. 13 of the GDPR - has been posted on the Eb2b Purchasing Platform in the "information obligation" tab. 3. I declare that the price offer on the Purchasing Platform was submitted by a person authorized to represent the Contractor. 4. I declare that the Subject Order will be Performed by Contractors Having an Appropriate and Documented Maintenance and Management System within the meaning of Point 9.2 Letter B) of Annex Ii to Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions concerning the Certification System of Entities in Charge of Maintenance of Vehicles in Accordance with Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws of the EU, 2019, p. 139, as amended). 5. I declare that the Subject Order will be Performed by Contractors Not Subject to Exclusion Under Art. 7 Sec. 1 of the Act of April 13, 2022, on Specific Solutions for Counteracting Support for Aggression Against Ukraine and Serving the Protection of National Security (consolidated text: Journal of Laws of 2023, item 129, as amended) V. Additional Information: The Proceedings Are Conducted in Accordance with the Provisions of § 25 of the Regulations for the Award of Sub-threshold Sectoral Contracts, Available to Contractors on the Ordering Party's Website https://koleje-wielkopolskie.com.pl/. Due to the Impact of the Execution of the Order on Transport Safety, the Provisions of § 5 Section 2 and § 22 of the Regulations Apply to the Proceedings. The General Terms and Conditions of Supply of Koleje Wielkopolskie Sp. Z Oo Available On The Ordering Party's Website https://bip.koleje-wielkopolskie.com.pl/zamowienia-publiczne/ogolne-warunki-dostaw/ Including the provisions of § 3 Sec. 7 of the General Terms of Supply of Koleje Wielkopolskie Sp. Z Oo Information Clause Under Art. 13 of the GDPR – Has Been Posted on the Eb2b Purchasing Platform In the “information obligation” tab. Please Send Any Questions Regarding the Proceedings Through the Purchasing Platform. Technical Assistance Can Be Obtained At The Telephone Number Located In The Footer At The Bottom Of The Page. A Contractor is excluded from the Proceedings On The Basis Of The Premises Indicated In § 7 Sec. 1 Points 1-4, 6 of the Regulations. "The ordering party is entitled to request the contractors to submit an Additional Offer Within The Meaning Of §2 Sec. 10 of the Regulations". Pursuant to Art. 7 Sec. 1 of the Act of 13 April 2022 on Special Solutions for Counteracting Support for Aggression Against Ukraine and for Protecting National Security (consolidated text: Journal of Laws of 2023, item 129, as amended; hereinafter referred to as the "Sanctions Act"), the following Contractor is excluded from this Public Procurement Procedure: 1) Listed on the Lists Specified in Council Regulation (EC) No 765/2006 of 18 May 2006 concerning restrictive measures in connection with the situation in Belarus (OJ EU L 134 of 20.05.2006, p. 1, as amended; hereinafter referred to as "Regulation 765/2006") and Council Regulation (EU) No. 269/2014 of 17 March 2014 On Restrictive Measures In Respect Of Actions Undermining Or Threatening The Territorial Integrity, Sovereignty And Independence Of Ukraine (EU Official Journal L. 78 of 17 March 2014, p. 6, As Amended; hereinafter referred to as "Regulation 269/2014") Or Inscribed On The Basis Of The Decision On Inclusion On The List Of The Measure Referred To In Art. 1 Item 3 Of The Sanctions Act; 2) Whose Beneficial Owner within the meaning of the Act of 1 March 2018 on Combating Money Laundering and Terrorism Financing (Journal of Laws of 2022, items 593, 655, 835, 2180 and 2185) is a Person included in the lists specified in Regulation 765/2006 and Regulation 269/2014 or entered on the List or being such a Beneficial Owner from 24 February 2022, provided that He or she was entered on the List on the basis of the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Item 3 of the Sanctions Act; 3) Whose Parent Entity within the meaning of Art. 3 Sec. 1 Point 37 of the Act of 29 September 1994 on Accounting (Journal of Laws of 2021, item 217, 2105 and 2106 and of 2022, item 1488), is an Entity Listed on the Lists Specified in Regulation 765/2006 and Regulation 269/2014 or Entered on the List or Being Such a Parent Entity from 24 February 2022, Provided That It Has Been Entered on the List Based on the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Point 3 of the Sanctions Act.
Closing Date8 Jan 2025
Tender AmountNA 

National Road and Highway Directorate Tender

Chemical Products
Corrigendum : Closing Date Modified
Poland
Details: I. Subject of the Proceedings: 1. Description of the Subject of the Order: - signaling of the Escha Automatic Door Lock No. Cat. 8606544 For En 76 - 30 Pieces 2. above The Assortment Must Meet The Following Requirements: Be New And Free From Defects, Original, Not Encumbered With Third Party Rights, 3. Accompanying Documentation: None Regulations on the Certification System of Entities in Charge of Vehicle Maintenance in accordance with Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws of the EU L. Z 2019, p. 139 Z Late Amended; hereinafter "Regulation 2019/779"), the Employer as the Entity in Charge of Vehicle Maintenance within the meaning of Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on Railway Safety (Recast) ( Journal of Laws of the European Union, L. Z 2016, No. 138, p. 102, as amended), Considering the impact of proper execution of the Contract on Railway Traffic Safety, requires that the subject of the Contract be implemented by Contractors with an appropriate and documented system Maintenance and Management Within the meaning of point 9.2 lit. B) of Annex Ii to Regulation 2019/779 (e.g. ISO 9001:2015, Iris). To confirm that the subject of the Order will be implemented by Contractors with an appropriate and documented maintenance and management system, it is necessary to submit a statement referred to in Chapter IV, Item 4. 5. Tender Evaluation Criterion: Price 99%, 1% Completion Date Ii. Terms of Order Execution: 1. Execution date - Order Execution date expected by the Ordering Party 7 Business Days. The Ordering Party indicates that it allows the submission of Tenders with a deadline longer than 7 Business Days. - The unit "days" defined in the Criterion of the Execution Date should be understood as Business Days - Execution Hours - 8:00 am to 2:00 pm 2. Rules for the Delivery and Unloading of Goods - According to the GTC 3. Place of Delivery: Koleje Wielkopolskie Sp. z o. o. Ul. Kolejowa 3, 66-210 Zbąszynek, Zbąszynek Rolling Stock Maintenance Point. The Contractor, no later than 12 hours before commencing the execution of the order, is obliged to confirm the date of delivery of the goods, including the time of delivery. 4. Delivery Method: One-Time Delivery, The Price Should Include The Cost Of Delivery And Unloading. 5. Payment date - According to the GTD; (payment deadline 30 Days From Invoice Issue) The Buyer accepts the issuance and delivery of Electronic Invoices by the Seller, in accordance with Art. 931, as amended; hereinafter referred to as "the VAT Act"). When issuing an electronic invoice, the seller is obliged to prepare it in pdf format. In the case of issuing an electronic invoice, the Seller is obliged to deliver it to the Buyer to the following e-mail address: Faktury@koleje-wielkopolskie.com.pl. 6. Guarantee conditions - In accordance with the GTD; 7. Deadline for Removing Defects Under the Guarantee - In accordance with the GTC; 8. Contractual penalties - Pursuant to § 7 of the GTD. iii. course of the Proceedings: The Ordering Party informs that the Proceedings are conducted in two stages: A) Stage I - Bid submission, B) Stage II - Electronic Bidding - Bidding will start automatically after the end of Stage I It will last 15 minutes and Extra Time - Sub-stage of Stage II, which The terms and conditions are described in detail in the Procurement Platform's Proceedings Setting. Each Overtime Lasts 3 Minutes - Starts if Within the Last 3 Minutes of the Proceedings, Another Bid (proceeding) is submitted correctly. Contractors approved by the Employer who fail to submit a Proposal correctly at the Bid Submission Stage (and Stage) will be automatically asked to leave the Further Stages of the Proceedings. The Ordering Party grants approval for the Order by placing on the Purchasing Platform Information about the Selection of the Most Advantageous Offer. With the moment referred to in the preceding sentence, the Order is awarded. The Ordering Party is entitled to withdraw from awarding the Order at any time. IV. Contractor's declarations: The Employer informs that participation in the Procedure in question is tantamount to submitting the following Declarations: 1. I declare that I have fulfilled the Information Obligations provided for in Art. In order to apply for the award of a public contract in this procedure. *Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation ) (Official Journal of the EU L 119 Z 04.05.2016, p. 1). 2. I declare that I consent to the processing of my personal data provided by me voluntarily to the Ordering Party. Information Clause With Art. 13 of the GDPR - Has been posted on the Eb2b Purchasing Platform in the "Information Obligation" tab. 3. I declare that the Price Offer on the Purchasing Platform was submitted by the Person Authorized to Represent the Contractor. 4. I declare that the Contract in question will be implemented by Contractors who have an appropriate and documented maintenance and management system within the meaning of point 9.2 lit. B) Annex Ii to the Commission Implementing Regulation (eu) 2019/779 of 16 May 2019 laying down detailed provisions on the system of certification of entities in charge of vehicle maintenance in accordance with Directive of the European Parliament and of the Council (eu) 2016/798 and repealing Commission Regulation ( ue) No. 445/2011 (Journal of Laws of the EU L. Z 2019, p. 139, as amended) 5. I declare that the Contract in question will be performed by contractors not subject to exclusion under Article 5k of the Council Regulation ( ue) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia's actions destabilizing the situation in Ukraine (OJ L. 2014 No. 229, p. 1, as amended) And Pursuant to Art. 7 Para. 1 of the Act of April 13, 2022 on Special Solutions for Counteracting the Support of Aggression against Ukraine and for the Protection of National Security (i.e. Journal of Laws of 2023, item 129, as amended) V. Additional information: Proceedings underway Pursuant to the provisions of § 25 of the Regulations for the Award of Sub-threshold Sectoral Contracts, Available to Contractors on the Ordering Party's website https://koleje-wielkopolskie.com.pl/. Due to the impact of the execution of the Order on the Safety of Transport, within the Proceedings, the provisions of § 5 Sec. 2 and § 22 of the Regulations. in the Proceedings, the General Terms and Conditions of Delivery of Koleje Wielkopolskie Sp. Z O. o. Available on the Ordering Party's website https://koleje-wielkopolskie.com.pl/. including the provisions of § 3 Sec. 7 of the General Delivery Terms of Koleje Wielkopolskie Sp. z o.o. Information clause Z Art. 13 of the GDPR - Was posted on the Eb2b Purchasing Platform in the "Information obligation" tab. Please direct any Questions Regarding the Proceedings via the Purchasing Platform. Technical Support can be obtained at the telephone number in the footer at the bottom of the page. Pursuant to Art. 7 Para. 1 of the Act of April 13, 2022 on Special Solutions for Counteracting the Support of Aggression against Ukraine and for the Protection of National Security (i.e. Journal of Laws of 2023, item 129, as amended; hereinafter referred to as the "Sanctions Act"), The Contractor is excluded from this Public Procurement Procedure: 1) Listed in the Council Regulation (EC) No. 765/2006 of 18 May 2006 concerning restrictive measures due to the situation in Belarus (Journal of Laws of the EU L 134 Z 20.05.2006, p. 1, as amended, hereinafter "Regulation 765/2006") and Council Regulation (EU) No. 269/2014 of 17 March 2014 on restrictive measures in relation to activities undermining the integrity Territorial, Sovereignty and Independence of Ukraine or threatening them (Journal of Laws of the EU L 78 Z 17.03.2014, p. 6, as amended; hereinafter referred to as "Regulation 269/2014") Or Entered on the List Based on the Decision on the Entry To the Determining List of the Measures referred to in Art. 1 Item 3 of the Sanctions Act; 2) Whose Beneficial Owner within the meaning of the Act of 1 March 2018 on Counteracting Money Laundering and Terrorist Financing (Journal of Laws of 2022, items 593, 655, 835, 2180 and 2185) is the person listed in the lists specified in Regulation 765/2006 and Regulation 269/2014 or entered on the list or being such a beneficial owner from February 24, 2022, as long as it was entered on the list on the basis of the decision on entry on the list determining the application of the measure referred to in Art. 1 Item 3 of the Sanctions Act; 3) whose Parent Undertaking within the meaning of Art. 3 Sec. 1 Item 37 of the Act of 29 September 1994 on Accounting (Journal of Laws of 2021, items 217, 2105 and 2106 and of 2022, item 1488), is an entity listed in the lists specified in Regulation 765/2006 I Regulation 269/2014 or entered on the list or being such a Parent Company from February 24, 2022, provided that it was entered on the list on the basis of a decision on entry on the list determining the application of the measure referred to in Art. 1 Item 3 Sanctions Act. Pursuant to Article 5k of Council Regulation (EU) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia's actions destabilizing the situation in Ukraine (Journal of Laws of the EU L. Z 2014 No. 229, p. 1 As amended; hereinafter "Regulation 833/2014"), The Contractor is excluded from this Public Procurement Proceeding: 1) a Russian citizen, a natural person residing in Russia or a legal person, entity or body with its registered office in Russia; 2) A legal person, entity or body to which ownership rights, directly or indirectly, in more than 50% belong to Russian citizens or natural persons residing in Russia, or legal persons, entities or bodies based in Russia; 3) A natural or legal person, entity or body acting on behalf of or under the direction of the entity referred to in point 1) or 2) of this section, and using subcontractors, suppliers or entities on whose capacity (if applicable), belonging to To one of the above Categories of Entities, in the event that they account for more than 10% of the Order Value.
Closing Soon30 Dec 2024
Tender AmountRefer Documents 

Koleje Wielkopolskie Sp Z O O Tender

Software and IT Solutions...+2Electrical and Electronics, Electrical Works
Poland
Details: I. Subject of the Proceedings: 1. Description of the Subject of the Order: - Insulator Flange Sleeve Nis103.00.01.1.26 – Pcs. 6 (drawing attached) 2. The aforementioned assortment must meet the following requirements: be new and free from defects, original, not encumbered by the rights of third parties. 3. Accompanying documentation: A Declaration 2.1 of Conformity of the Goods, issued by its manufacturer based on the PN En 10204:2006 standard or a quality document issued by its manufacturer based on an equivalent standard (coc), is required with the delivery. 4. Having regard to the provisions of Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions concerning a system of certification of entities in charge of maintenance of vehicles in accordance with Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No 445/2011 (OJ EU L. 2019, p. 139, as amended; hereinafter referred to as "Regulation 2019/779"), the Contracting Authority, as the entity in charge of maintenance of vehicles within the meaning of Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on railway safety (recast) (OJ EU L. 2019, p. 2016 R. No. 138, Page 102, As Amended), Taking into account the impact of correct execution of the order on railway traffic safety, requires that the subject of the order be executed by contractors having an appropriate and documented maintenance and management system within the meaning of point 9.2 letter B) of annex Ii to regulation 2019/779 (e.g. ISO 9001:2015, Iris). Confirmation that the subject of the order will be executed by contractors having an appropriate and documented maintenance and management system is the submission of the declaration referred to in chapter iv point 4. 5. Offer evaluation criterion: 99% price, 1% completion date. Ii. Conditions of order execution: 1. Implementation date The order execution date expected by the ordering party is 7 business days. The Ordering Party Indicates That It Allows the Submission of Offers With a Deadline Longer Than 7 Business Days. - The unit of "days" specified in the Implementation Deadline criterion should be understood as Business Days. - Implementation Hours – 7:00 To 15:00 2. Principles of Delivery and Unloading of Goods – In Accordance with the Terms and Conditions 3. Place of Delivery: - Koleje Wielkopolskie Sp. Z Oo Ul. Leśna 1d, 62-100 Wągrowiec, Rolling Stock Maintenance Point Wągrowiec. The Contractor, No Later Than 12 Hours Before Starting to Execute the Order, Is Obliged to Confirm the Goods Delivery Date, Including the Delivery Time. 4. Delivery Method: One-off Delivery, The Price Should Include the Cost of Delivery and Unloading. 5. Payment Date – In Accordance with the Terms and Conditions; (Payment deadline 30 Days from Invoice Issue). The Buyer Accepts the Issuance and Delivery of Electronic Invoices by the Seller, In Pursuant to Art. 106n of the Act of 11 March 2004 on Tax on Goods and Services (i.e. Journal of Laws of 2022, item 931, as amended; hereinafter "VAT Act"). When issuing an Electronic Invoice, the Seller is obliged to prepare it in PDF format. - In the case of issuing an Electronic Invoice, the Seller is obliged to deliver it to the Buyer to the e-mail address: Faktury@koleje-wielkopolskie.com.pl. - In the case of issuing invoices in paper form, the Contractor is obliged to deliver them exclusively to the following address: Koleje Wielkopolskie Sp. Z Oo Ul. Składowa 5, 61-897 Poznań In the event of delivering a paper invoice to a different address, the invoice may be deemed as undelivered, which may result in delays in its processing and payment. 6. Warranty Terms – In Accordance with the General Terms and Conditions; 7. Deadline for Removing Defects Under the Warranty – In Accordance with the General Terms and Conditions; 8. Contractual Penalties – In Accordance with § 7 of the General Terms and Conditions. At the same time, the Ordering Party informs that the total value of Contractual Penalties may not exceed 20% of the Remuneration. Iii. The course of the procedure: The Ordering Party informs that the procedure is conducted in two stages: A) Stage I - Submission of offers that will take part in Stage II, B) Stage II - Electronic bidding - the bidding will start automatically after the end of Stage I and will last 15 minutes, as well as the extra time - sub-stage of Stage II, the conditions of which are precisely described in the procedure settings on the Purchasing Platform. Each extra time lasts 3 minutes - it starts if another offer (bid) is submitted correctly within the last 3 minutes of the procedure. Contractors accepted by the Ordering Party, who do not submit their offer correctly at the stage of submitting offers (stage I), will be automatically asked out of the further stages of the procedure. The Ordering Party grants a confirmation of the order by placing information on the selection of the most advantageous offer on the Purchasing Platform. At the time referred to in the preceding sentence, the Order is awarded. The Ordering Party is entitled to withdraw from the Order Award at any time. Iv. Contractor's Declarations: The Ordering Party informs that participation in the subject Proceedings is equivalent to submitting the following Declarations: 1. I declare that I have fulfilled the Information Obligations Provided for in Art. 13 or Art. 14 of the GDPR*) towards Natural Persons from whom I have directly or indirectly obtained Personal Data in order to apply for the award of a public contract in this Proceeding. *Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ EU L. 119 of 04.05.2016, p. 1). 2. I declare that I consent to the processing of my personal data provided by me voluntarily to the Ordering Party. Information Clause from Art. 13 of the GDPR - has been posted on the Eb2b Purchasing Platform in the "information obligation" tab. 3. I declare that the price offer on the Purchasing Platform was submitted by a person authorized to represent the Contractor. 4. I declare that the Subject Order will be Performed by Contractors Having an Appropriate and Documented Maintenance and Management System within the meaning of Point 9.2 Letter B) of Annex Ii to Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions concerning the Certification System of Entities in Charge of Maintenance of Vehicles in Accordance with Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws of the EU, 2019, p. 139, as amended). 5. I declare that the Subject Order will be Performed by Contractors Not Subject to Exclusion Under Art. 7 Sec. 1 of the Act of April 13, 2022, on Specific Solutions for Counteracting Support for Aggression Against Ukraine and Serving the Protection of National Security (consolidated text: Journal of Laws of 2023, item 129, as amended) V. Additional Information: The Proceedings Are Conducted in Accordance with the Provisions of § 25 of the Regulations for the Award of Sub-threshold Sectoral Contracts, Available to Contractors on the Ordering Party's Website https://koleje-wielkopolskie.com.pl/. Due to the Impact of the Execution of the Order on Transport Safety, the Provisions of § 5 Section 2 and § 22 of the Regulations Apply to the Proceedings. The General Terms and Conditions of Supply of Koleje Wielkopolskie Sp. Z Oo Available On The Ordering Party's Website https://bip.koleje-wielkopolskie.com.pl/zamowienia-publiczne/ogolne-warunki-dostaw/ Including the provisions of § 3 Sec. 7 of the General Terms of Supply of Koleje Wielkopolskie Sp. Z Oo Information Clause Under Art. 13 of the GDPR – Has Been Posted on the Eb2b Purchasing Platform In the “information obligation” tab. Please Send Any Questions Regarding the Proceedings Through the Purchasing Platform. Technical Assistance Can Be Obtained At The Telephone Number Located In The Footer At The Bottom Of The Page. A Contractor is excluded from the Proceedings On The Basis Of The Premises Indicated In § 7 Sec. 1 Points 1-4, 6 of the Regulations. "The ordering party is entitled to request the contractors to submit an Additional Offer Within The Meaning Of §2 Sec. 10 of the Regulations". Pursuant to Art. 7 Sec. 1 of the Act of 13 April 2022 on Special Solutions for Counteracting Support for Aggression Against Ukraine and for Protecting National Security (consolidated text: Journal of Laws of 2023, item 129, as amended; hereinafter referred to as the "Sanctions Act"), the following Contractor is excluded from this Public Procurement Procedure: 1) Listed on the Lists Specified in Council Regulation (EC) No 765/2006 of 18 May 2006 concerning restrictive measures in connection with the situation in Belarus (OJ EU L 134 of 20.05.2006, p. 1, as amended; hereinafter referred to as "Regulation 765/2006") and Council Regulation (EU) No. 269/2014 of 17 March 2014 On Restrictive Measures In Respect Of Actions Undermining Or Threatening The Territorial Integrity, Sovereignty And Independence Of Ukraine (EU Official Journal L. 78 of 17 March 2014, p. 6, As Amended; hereinafter referred to as "Regulation 269/2014") Or Inscribed On The Basis Of The Decision On Inclusion On The List Of The Measure Referred To In Art. 1 Item 3 Of The Sanctions Act; 2) Whose Beneficial Owner within the meaning of the Act of 1 March 2018 on Combating Money Laundering and Terrorism Financing (Journal of Laws of 2022, items 593, 655, 835, 2180 and 2185) is a Person included in the lists specified in Regulation 765/2006 and Regulation 269/2014 or entered on the List or being such a Beneficial Owner from 24 February 2022, provided that He or she was entered on the List on the basis of the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Item 3 of the Sanctions Act; 3) Whose Parent Entity within the meaning of Art. 3 Sec. 1 Point 37 of the Act of 29 September 1994 on Accounting (Journal of Laws of 2021, item 217, 2105 and 2106 and of 2022, item 1488), is an Entity Listed on the Lists Specified in Regulation 765/2006 and Regulation 269/2014 or Entered on the List or Being Such a Parent Entity from 24 February 2022, Provided That It Has Been Entered on the List Based on the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Point 3 of the Sanctions Act.
Closing Date8 Jan 2025
Tender AmountNA 

Koleje Wielkopolskie Sp Z O O Tender

Software and IT Solutions...+2Electrical and Electronics, Electrical Works
Poland
Details: I. Subject of the Proceedings: 1. Description of the Subject of the Order: - Air Filter Insert 8690940020 (mtu 93212140138) For Sa 132/134 - 6 Pieces - Photo Attached 2. The Above-mentioned Assortment Must Meet the Following Requirements: Be New and Free from Defects, Original, Not Encumbered by the Rights of Third Parties. 3. Accompanying Documentation: With Delivery Required Declaration 2.1 of Conformity of the Goods, Issued by Its Manufacturer Based on the PN En 10204:2006 Standard or Quality Document Issued by Its Manufacturer Based on an Equivalent Standard (coc) 4. Having regard to the provisions of Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions on the Certification System of Entities in Charge of Maintenance of Vehicles in Pursuance of Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws EU L. of 2019, p. 139, as amended; Hereinafter "Regulation 2019/779"), the Ordering Party, as the Entity Responsible for Maintenance of Vehicles Within the Meaning of Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on Railway Safety (Recast) (Journal of Laws of the EU, No. 138, 2016, p. 102, as amended), Taking into Account the Impact of the Correct Execution of the Order on the Safety of Railway Traffic, Requires that the Subject Matter of the Order Be Executed by Contractors Having an Appropriate and Documented Maintenance and Management System Within the Meaning of Point 9.2 Letter B) of Annex Ii to Regulation 2019/779 (e.g. ISO 9001:2015, Iris). Confirmation That the Subject of the Order Will Be Implemented by Contractors Having an Appropriate and Documented Maintenance and Management System Is the Submission of the Declaration Referred to in Chapter Iv Point 4. 5. Offer Evaluation Criterion: 99% Price, 1% Completion Date. Ii. Conditions of Order Execution: 1. Completion Date The order completion date expected by the Ordering Party is 7 Business Days. The Ordering Party indicates that it allows the submission of offers with a deadline longer than 7 Business Days. - The unit "days" specified in the completion date criterion should be understood as Business Days. - Hours of implementation – 7:00 to 15:00 2. Principles of Delivery and Unloading of Goods – In Accordance with the Owd 3. Place of Delivery: - Koleje Wielkopolskie Sp. Z Oo Ul. Kolejowa 23, 60-717 Poznań, Rolling Stock Maintenance Point Poznań The Contractor, No Later Than 12 Hours Before Starting to Execute the Order, Is Obliged to Confirm the Delivery Date of the Goods, Including the Delivery Time. 4. Delivery Method: One-off Delivery, The Price Should Include the Cost of Delivery and Unloading. 5. Payment Date – In accordance with the T&Cs; (payment date 30 Days from the Invoice Issue Date). The Buyer Accepts the Issuance and Delivery of Electronic Invoices by the Seller, In Pursuant to Art. 106n of the Act of 11 March 2004 on Tax on Goods and Services (i.e. Journal of Laws of 2022, item 931, as amended; hereinafter "VAT Act"). When issuing an Electronic Invoice, the Seller Is Obliged to prepare it in Pdf format. - In the Case of Issue of an Electronic Invoice, the Seller Is Obliged to Deliver It to the Buyer to the E-mail Address: Faktury@koleje-wielkopolskie.com.pl. - In the Case of Issue of Invoices in Paper Form, the Contractor Is Obliged to Deliver Them Only to the Following Address: Koleje Wielkopolskie Sp. Z Oo Ul. Składowa 5, 61-897 Poznań In the Case of Delivering a Paper Invoice to a Different Address, the Invoice May Be Deemed as Undelivered, Which May Result in Delays in Its Processing and Payment. 6. Warranty Terms – In Accordance with the Owd; 7. Deadline for Removing Defects Under the Warranty – In Accordance with the Owd; 8. Contractual Penalties – In Accordance with § 7 of the Owd. At the same time, the Ordering Party informs that the total Value of Contractual Penalties May Not Exceed 20% of the Remuneration. Iii. The course of the procedure: The Ordering Party informs that the procedure is conducted in two stages: A) Stage I - Submission of offers that will take part in Stage II, B) Stage II - Electronic bidding - the bidding will start automatically after the end of Stage I and will last 15 minutes, as well as the extra time - sub-stage of Stage II, the conditions of which are precisely described in the procedure settings on the Purchasing Platform. Each extra time lasts 3 minutes - it starts if another offer (bid) is submitted correctly within the last 3 minutes of the procedure. Contractors accepted by the Ordering Party, who do not submit their offer correctly at the stage of submitting offers (stage I), will be automatically asked out of the further stages of the procedure. The Ordering Party grants a confirmation of the order by placing information on the Purchasing Platform about the selection of the most advantageous offer. At the time referred to in the preceding sentence, the Order is awarded. The Ordering Party is entitled to withdraw from the Order Award at any time. Iv. Contractor's Declarations: The Ordering Party informs that participation in the subject Proceedings is equivalent to submitting the following Declarations: 1. I declare that I have fulfilled the Information Obligations Provided for in Art. 13 or Art. 14 of the GDPR*) towards Natural Persons from whom I have directly or indirectly obtained Personal Data in order to apply for the award of a public contract in this Proceeding. *Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ EU L. 119 of 04.05.2016, p. 1). 2. I declare that I consent to the processing of my personal data provided by me voluntarily to the Ordering Party. Information Clause from Art. 13 of the GDPR - has been posted on the Eb2b Purchasing Platform in the "information obligation" tab. 3. I declare that the price offer on the Purchasing Platform was submitted by a person authorized to represent the Contractor. 4. I declare that the Subject Order will be Performed by Contractors Having an Appropriate and Documented Maintenance and Management System within the meaning of Point 9.2 Letter B) of Annex Ii to Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions concerning the Certification System of Entities in Charge of Maintenance of Vehicles in Accordance with Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws of the EU, 2019, p. 139, as amended). 5. I declare that the Subject Order will be Performed by Contractors Not Subject to Exclusion Under Art. 7 Sec. 1 of the Act of April 13, 2022, on Specific Solutions for Counteracting Support for Aggression Against Ukraine and Serving the Protection of National Security (consolidated text: Journal of Laws of 2023, item 129, as amended) V. Additional Information: The Proceedings Are Conducted in Accordance with the Provisions of § 25 of the Regulations for the Award of Sub-threshold Sectoral Contracts, Available to Contractors on the Ordering Party's Website https://koleje-wielkopolskie.com.pl/. Due to the Impact of the Execution of the Order on Transport Safety, the Provisions of § 5 Section 2 and § 22 of the Regulations Apply to the Proceedings. The General Terms and Conditions of Supply of Koleje Wielkopolskie Sp. Z Oo Available On The Ordering Party's Website https://bip.koleje-wielkopolskie.com.pl/zamowienia-publiczne/ogolne-warunki-dostaw/ Including the provisions of § 3 Sec. 7 of the General Terms of Supply of Koleje Wielkopolskie Sp. Z Oo Information Clause Under Art. 13 of the GDPR – Has Been Posted on the Eb2b Purchasing Platform In the “information obligation” tab. Please Send Any Questions Regarding the Proceedings Through the Purchasing Platform. Technical Assistance Can Be Obtained At The Telephone Number Located In The Footer At The Bottom Of The Page. A Contractor is excluded from the Proceedings On The Basis Of The Premises Indicated In § 7 Sec. 1 Points 1-4, 6 of the Regulations. "The ordering party is entitled to request the contractors to submit an Additional Offer Within The Meaning Of §2 Sec. 10 of the Regulations". Pursuant to Art. 7 Sec. 1 of the Act of 13 April 2022 on Special Solutions for Counteracting Support for Aggression Against Ukraine and for Protecting National Security (consolidated text: Journal of Laws of 2023, item 129, as amended; hereinafter referred to as the "Sanctions Act"), the following Contractor is excluded from this Public Procurement Procedure: 1) Listed on the Lists Specified in Council Regulation (EC) No 765/2006 of 18 May 2006 concerning restrictive measures in connection with the situation in Belarus (OJ EU L 134 of 20.05.2006, p. 1, as amended; hereinafter referred to as "Regulation 765/2006") and Council Regulation (EU) No. 269/2014 of 17 March 2014 On Restrictive Measures In Respect Of Actions Undermining Or Threatening The Territorial Integrity, Sovereignty And Independence Of Ukraine (EU Official Journal L. 78 of 17 March 2014, p. 6, As Amended; hereinafter referred to as "Regulation 269/2014") Or Inscribed On The Basis Of The Decision On Inclusion On The List Of The Measure Referred To In Art. 1 Item 3 Of The Sanctions Act; 2) Whose Beneficial Owner within the meaning of the Act of 1 March 2018 on Combating Money Laundering and Terrorism Financing (Journal of Laws of 2022, items 593, 655, 835, 2180 and 2185) is a Person included in the lists specified in Regulation 765/2006 and Regulation 269/2014 or entered on the List or being such a Beneficial Owner from 24 February 2022, provided that He or she was entered on the List on the basis of the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Item 3 of the Sanctions Act; 3) Whose Parent Entity within the meaning of Art. 3 Sec. 1 Point 37 of the Act of 29 September 1994 on Accounting (Journal of Laws of 2021, item 217, 2105 and 2106 and of 2022, item 1488), is an Entity Listed on the Lists Specified in Regulation 765/2006 and Regulation 269/2014 or Entered on the List or Being Such a Parent Entity from 24 February 2022, Provided That It Has Been Entered on the List Based on the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Point 3 of the Sanctions Act.
Closing Date8 Jan 2025
Tender AmountNA 
5851-5860 of 5866 active Tenders