Website Tenders

Details: Description: The Royal Canadian Mounted Police (rcmp) Requires The Supply And Delivery Of Hazardous Waste, Lead Dust & Debris Cleaning And Disposal Services For The Depot (t-division) Integrated Training Centre Phase 2 Areas To Comply With The Rcmp Health And Safety Requirements To Minimize Firing Range Excessive Lead Levels. The Request For Proposal (rfp) Is Distributed To The Ew479-162880 Hazardous Waste Disposal Services Supply Arrangement (sa) Holders That Are Qualified For Work In The Province Of Saskatchewan. Any Supplier That Wishes To Obtain A Supply Arrangement For Hazardous Waste Disposal Services May Do So By Responding To The Request For Supply Arrangement (rfsa) With The Solicitation Number Ew479-162880 On Canada Buys/tenders Https://canadabuys.canada.ca/en/tender-opportunities. The Rfsa Will Remain Valid Until Such Time As Pspc No Longer Considers It To Be Advantageous To Use It. Security: This Solicitation Contains A Security Requirement. Site Visit: A Site Visit Is Being Offered. Please Refer To The Request For Proposal (rfp) For Additional Details. Basis Of Selection: A Bid Must Comply With All Requirements Of The Bid Solicitation To Be Declared Responsive. The Responsive Bid With The Lowest Evaluated Price Will Be Recommended For Award Of A Contract. Tenders Must Be Submitted To The Rcmp Bid Receiving Unit As Per Page One Of The Request For Proposal (rfp). Refer To The Attached Tender Documents To Obtain Further Information. Canada Retains The Right To Negotiate With Any Supplier On Any Procurement. Documents May Be Submitted In Either Official Language Of Canada. The Rcmp Has Adopted The Integrity Regime Administered By Public Services And Procurement Canada. As A Result, The Integrity Provisions Are Being Applied In Rcmp Contracting Activities As Outlined In This Solicitation. Canada Will Make Available Notices Of Proposed Procurement (npp), Bid Solicitations And Related Documents For Download Through The Government Electronic Tendering Service (gets) At Https://canadabuys.canada.ca/en/tender-opportunities . Canada Is Not Responsible And Will Not Assume Any Liabilities Whatsoever For The Information Found On Websites Of Third Parties. In The Event An Npp, Bid Solicitation Or Related Documentation Would Be Amended, Canada Will Not Be Sending Notifications. Canada Will Post All Amendments, Including Significant Enquiries Received And Their Replies, Using Gets. It Is The Sole Responsibility Of The Bidder To Regularly Consult Gets For The Most Up-to-date Information. Canada Will Not Be Liable For Any Oversight On The Bidder's Part Nor For Notification Services Offered By A Third Party.

Details: Description Invitation To Bid December 5, 2024 1. The Dpwh–biliran District Engineering Office, Through Gaa Fy-2025, Intends To Apply The Sum Of The Approved Budget For The Contract (abc) Stated Below Being The Abc To Payments Under The Contracts Below. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening And Declared Non-complying/failed. 2. The Dpwh–biliran District Engineering Office, Through Its Bids And Awards Committee (bac) Now Invites Bids For The Hereunder Works Of The Following Contract/s: 1. Procurement Id/contract Id : 25ia0104 Contract Name : Installation/application Of Road Safety Facilities - Naval-caibiran Cross Country Rd - K1027+000 - K1031+530 Contract Location : Naval, Biliran (11.565233°, 124.404044°- 11.578701°, 124.441236°) Project Description/scope Of Work : Installation Of 181 Units Of Solar Street Lights Approved Budget For The Contract : P 29,398,224.41 Contract Duration : 130.00 C.d. Cost Of Bidding Documents : P 25,000.00 2. Procurement Id/contract Id : 25ia0105 Contract Name : Construction Of Access Roads Leading To Declared Tourism Destinations - Access Road Leading To Subing Subing Hill, Kawayan, Biliran Contract Location : Brgy. Balacson, Kawayan, Biliran 11.669727, 124.344403 - 11.671273, 124.343774 (location 1) 11.675592, 124.343897 - 11.676395, 124.343767 (location 2) Project Description/scope Of Work : Construction Of 0.746 Lane Kilometer Road, 0.23m Thick & 6.10m Width With Embankment, Drainage, And Slope Protection Structure Approved Budget For The Contract : P 19,598,031.50 Contract Duration : 160.00 Cd Cost Of Bidding Documents : P 25,000.00 3. Procurement Id/contract Id : 25ia0106 Contract Name : Construction Of Drainage, Barangay Calumpang, Naval, Biliran Contract Location : Brgy. Calumpang, Naval, Biliran Location 1 - (11.568507°, 124.412067° - 11.570055°, 124.41164°) Location 2 - (11.569489°, 124.411632° - 11.569495°, 124.41162°) Project Description/scope Of Work : Construction Of 616.70 Ln.m Open Drainage (lined Canal) W/ Metal Frames And Gratings Approved Budget For The Contract : P 4,948,200.18 Contract Duration : 85.00 C.d. Cost Of Bidding Documents : P 5,000.00 Page 2 Of 4 4. Procurement Id/contract Id : 25ia0107 Contract Name : Construction Of Seawall, Barangay Mabini, Naval, Biliran Contract Location : Brgy. Mabini, Naval, Biliran (11.564381°, 124.275058° - 11.564806°, 124.274625°) Project Description/scope Of Work : Construction Of 93.20 Ln.m. Seawall Structure With Reinforced Concrete Facing Approved Budget For The Contract : P 9,898,256.03 Contract Duration : 165.00 C.d. Cost Of Bidding Documents : P 10,000.00 5. Procurement Id/contract Id : 25ia0108 Contract Name : Construction Of Bagongbong Flood Control, Barangay Salangi, Almeria, Biliran Contract Location : Almeria, Biliran (124.394165°, 11.621246° - 124.394360°, 11.623738°) Project Description/scope Of Work : Construction Of 334.00 Ln.m. Flood Control Structure Approved Budget For The Contract : P 19,598,391.73 Contract Duration : 143.00 C.d. Cost Of Bidding Documents : P 25,000.00 6. Procurement Id/contract Id : 25ia0109 Contract Name : Construction Of Flood Control Structure, Barangay Casiawan, Cabucgayan, Biliran Contract Location : Cabucgayan, Biliran (124.573765°, 11.484283° - 124.575893°, 11.486335°) Project Description/scope Of Work : Construction Of 424.00 Ln.m. Flood Control Structure Approved Budget For The Contract : P 19,598,372.48 Contract Duration : 143.00 C.d. Cost Of Bidding Documents : P 25,000.00 7. Procurement Id/contract Id : 25ia0110 Contract Name : Construction Two-storey Office Building, Dpwh Biliran Deo, Bureau Of Equipment, 8th Res, Barangay Larrazabal, Naval, Biliran Contract Location : Brgy. Larrazabal, Naval, Biliran (11.583267, 124.409843 & 11.58306, 124.409215) Project Description/scope Of Work : Construction Of 2-storey Building Approved Budget For The Contract : P 48,998,346.17 Contract Duration : 250.00 C.d. Cost Of Bidding Documents : P 25,000.00 8. Procurement Id/contract Id : 25ia0111 Contract Name : Construction Of Multi-purpose Building, Barangay Matanggo, Almeria, Biliran Contract Location : Barangay Matanggo, Almeria, Biliran (11.647594, 124.124.368010) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,276.36 Contract Duration : 140.00 C.d. Cost Of Bidding Documents : P 5,000.00 9. Procurement Id/contract Id : 25ia0112 Contract Name : Construction Of Multi-purpose Building,barangay, P.i. Garcia, Naval, Biliran Contract Location : Brgy. P.i. Garcia, Naval, Biliran (11.563721, 124.395253) Project Description/scope Of Work : Construction Of 2-storey Building Approved Budget For The Contract : P 4,898,328.55 Contract Duration : 180.00 C.d. Cost Of Bidding Documents : P 5,000.00 Page 3 Of 4 10. Procurement Id/contract Id : 25ia0113 Contract Name : Construction (completion) Of Multi-purpose Building, Barangay Pulang Bato, Almeria, Biliran Contract Location : Barangay Pulang Bato, Almeria, Biliran (11.600953, 124.390656) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,276.06 Contract Duration : 140.00 C.d. Cost Of Bidding Documents : P 5,000.00 11. Procurement Id/contract Id : 25ia0114 Contract Name : Construction Of Multi-purpose Building, Barangay Union, Caibiran, Biliran Contract Location : Brgy.union, Caibiran, Biliran (11.56519194⁰, 124.55213936⁰) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,219.25 Contract Duration : 125.00 C.d. Cost Of Bidding Documents : P 5,000.00 12. Procurement Id/contract Id : 25ia0115 Contract Name : Construction (completion) Of Multi-purpose Building, Barangay Binohangan, Caibiran, Biliran Contract Location : Brgy. Binohangan, Caibiran, Biliran (11.596326˚, 124.570058˚) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 1,978,469.83 Contract Duration : 75.00 C.d. Cost Of Bidding Documents : P 5,000.00 13. Procurement Id/contract Id : 25ia0116 Contract Name : Completion Of Multi-purpose Building, Barangay Trabugan, Maripipi, Biliran Contract Location : Brgy. Trabugan, Maripipi, Biliran (11.779571˚, 124.299212˚) Project Description/scope Of Work : Completion Of 1-storey Building Approved Budget For The Contract : P 1,978,412.59 Contract Duration : 70.00 C.d. Cost Of Bidding Documents : P 5,000.00 Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of Small B & Medium A As Per Pcab Resolution No. 201, Series Of 2017, (b) Completion Of A Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc. Contractors/applicants Who Wish To Participate In The Biding Are Encouraged To Enroll With The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Building, Bonifacio Drive, Port Area Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From Dpwh, Biliran District Engineering Office, Naval, Biliran And Inspect The Bidding Documents At The Address Given Below From 8:00a.m. To 5:00 P.m. Page 4 Of 4 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of An Applicable Fee For The Bidding Documents In The Amount Stated Above. Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of The R.a. 9184 And Its Irr. Bidders Can Make Payments For The Purchase Of Bidding Documents At Any Dpwh Field Offices. The Schedule Of Key Procurement Activities For This Contract Is Shown Below: Activity Time Place Date Of Posting December 6, 2024 – December 26, 2024 Dpwh Web / Philgeps / Bulletin Board Issuance Of Bidding Documents December 6, 2024 – December 26, 2024 Bac Office, Biliran-deo, Naval, Biliran Pre-bid Conference December 13, 2024; 10:00 A.m. Bac Conference Room, Biliran-deo, Naval, Biliran Receipt By The Bac Of Bids December 26, 2024, 1:00 P.m. Bac Office, Biliran-deo, Naval, Biliran Opening Of Bids December 26, 2024; 1:00 P.m. Conference Room, Biliran-deo, Naval, Biliran 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That The Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. Pre-bid Conference And Opening Of Bids Will Be Held At The Bac Office, Dpwh-biliran District Engineering Office, Naval, Biliran Which Shall Be Open To All Interested Parties. Bidding For The Above Contract Shall Be Conducted “short Of Award” Pending Availability/ Receipt Of Fy-2025 Funds/saa. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_biliran For Electronic Submission On Or Before December 26, 2024 At 1:00 P.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On December 26, 2024 At 1:00 P.m. Immediately After The Deadline Of The Dropping Of Bids At Bac Conference Room, Biliran-deo, Naval, Biliran. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh-biliran District Engineering Office, Naval, Biliran Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of R.a. 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Head, Bac Secretariat Bac Office, Dpwh Biliran District Engineering Office Brgy. Calumpang, Naval, Biliran Province Telefax No.: (053) 500-9097 Email Add: Dpwh.bdeo@gmail.com Approved: Rosario B. Rosete Assistant District Engineer Bac Chairperson Noted: Irwin L. Antonio, Asean Eng. Oic-district Engineer encoded/printedbyrcpancito December 5, 2024

Details: Description Invitation To Bid December 5, 2024 1. The Dpwh–biliran District Engineering Office, Through Gaa Fy-2025, Intends To Apply The Sum Of The Approved Budget For The Contract (abc) Stated Below Being The Abc To Payments Under The Contracts Below. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening And Declared Non-complying/failed. 2. The Dpwh–biliran District Engineering Office, Through Its Bids And Awards Committee (bac) Now Invites Bids For The Hereunder Works Of The Following Contract/s: 1. Procurement Id/contract Id : 25ia0104 Contract Name : Installation/application Of Road Safety Facilities - Naval-caibiran Cross Country Rd - K1027+000 - K1031+530 Contract Location : Naval, Biliran (11.565233°, 124.404044°- 11.578701°, 124.441236°) Project Description/scope Of Work : Installation Of 181 Units Of Solar Street Lights Approved Budget For The Contract : P 29,398,224.41 Contract Duration : 130.00 C.d. Cost Of Bidding Documents : P 25,000.00 2. Procurement Id/contract Id : 25ia0105 Contract Name : Construction Of Access Roads Leading To Declared Tourism Destinations - Access Road Leading To Subing Subing Hill, Kawayan, Biliran Contract Location : Brgy. Balacson, Kawayan, Biliran 11.669727, 124.344403 - 11.671273, 124.343774 (location 1) 11.675592, 124.343897 - 11.676395, 124.343767 (location 2) Project Description/scope Of Work : Construction Of 0.746 Lane Kilometer Road, 0.23m Thick & 6.10m Width With Embankment, Drainage, And Slope Protection Structure Approved Budget For The Contract : P 19,598,031.50 Contract Duration : 160.00 Cd Cost Of Bidding Documents : P 25,000.00 3. Procurement Id/contract Id : 25ia0106 Contract Name : Construction Of Drainage, Barangay Calumpang, Naval, Biliran Contract Location : Brgy. Calumpang, Naval, Biliran Location 1 - (11.568507°, 124.412067° - 11.570055°, 124.41164°) Location 2 - (11.569489°, 124.411632° - 11.569495°, 124.41162°) Project Description/scope Of Work : Construction Of 616.70 Ln.m Open Drainage (lined Canal) W/ Metal Frames And Gratings Approved Budget For The Contract : P 4,948,200.18 Contract Duration : 85.00 C.d. Cost Of Bidding Documents : P 5,000.00 Page 2 Of 4 4. Procurement Id/contract Id : 25ia0107 Contract Name : Construction Of Seawall, Barangay Mabini, Naval, Biliran Contract Location : Brgy. Mabini, Naval, Biliran (11.564381°, 124.275058° - 11.564806°, 124.274625°) Project Description/scope Of Work : Construction Of 93.20 Ln.m. Seawall Structure With Reinforced Concrete Facing Approved Budget For The Contract : P 9,898,256.03 Contract Duration : 165.00 C.d. Cost Of Bidding Documents : P 10,000.00 5. Procurement Id/contract Id : 25ia0108 Contract Name : Construction Of Bagongbong Flood Control, Barangay Salangi, Almeria, Biliran Contract Location : Almeria, Biliran (124.394165°, 11.621246° - 124.394360°, 11.623738°) Project Description/scope Of Work : Construction Of 334.00 Ln.m. Flood Control Structure Approved Budget For The Contract : P 19,598,391.73 Contract Duration : 143.00 C.d. Cost Of Bidding Documents : P 25,000.00 6. Procurement Id/contract Id : 25ia0109 Contract Name : Construction Of Flood Control Structure, Barangay Casiawan, Cabucgayan, Biliran Contract Location : Cabucgayan, Biliran (124.573765°, 11.484283° - 124.575893°, 11.486335°) Project Description/scope Of Work : Construction Of 424.00 Ln.m. Flood Control Structure Approved Budget For The Contract : P 19,598,372.48 Contract Duration : 143.00 C.d. Cost Of Bidding Documents : P 25,000.00 7. Procurement Id/contract Id : 25ia0110 Contract Name : Construction Two-storey Office Building, Dpwh Biliran Deo, Bureau Of Equipment, 8th Res, Barangay Larrazabal, Naval, Biliran Contract Location : Brgy. Larrazabal, Naval, Biliran (11.583267, 124.409843 & 11.58306, 124.409215) Project Description/scope Of Work : Construction Of 2-storey Building Approved Budget For The Contract : P 48,998,346.17 Contract Duration : 250.00 C.d. Cost Of Bidding Documents : P 25,000.00 8. Procurement Id/contract Id : 25ia0111 Contract Name : Construction Of Multi-purpose Building, Barangay Matanggo, Almeria, Biliran Contract Location : Barangay Matanggo, Almeria, Biliran (11.647594, 124.124.368010) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,276.36 Contract Duration : 140.00 C.d. Cost Of Bidding Documents : P 5,000.00 9. Procurement Id/contract Id : 25ia0112 Contract Name : Construction Of Multi-purpose Building,barangay, P.i. Garcia, Naval, Biliran Contract Location : Brgy. P.i. Garcia, Naval, Biliran (11.563721, 124.395253) Project Description/scope Of Work : Construction Of 2-storey Building Approved Budget For The Contract : P 4,898,328.55 Contract Duration : 180.00 C.d. Cost Of Bidding Documents : P 5,000.00 Page 3 Of 4 10. Procurement Id/contract Id : 25ia0113 Contract Name : Construction (completion) Of Multi-purpose Building, Barangay Pulang Bato, Almeria, Biliran Contract Location : Barangay Pulang Bato, Almeria, Biliran (11.600953, 124.390656) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,276.06 Contract Duration : 140.00 C.d. Cost Of Bidding Documents : P 5,000.00 11. Procurement Id/contract Id : 25ia0114 Contract Name : Construction Of Multi-purpose Building, Barangay Union, Caibiran, Biliran Contract Location : Brgy.union, Caibiran, Biliran (11.56519194⁰, 124.55213936⁰) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,219.25 Contract Duration : 125.00 C.d. Cost Of Bidding Documents : P 5,000.00 12. Procurement Id/contract Id : 25ia0115 Contract Name : Construction (completion) Of Multi-purpose Building, Barangay Binohangan, Caibiran, Biliran Contract Location : Brgy. Binohangan, Caibiran, Biliran (11.596326˚, 124.570058˚) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 1,978,469.83 Contract Duration : 75.00 C.d. Cost Of Bidding Documents : P 5,000.00 13. Procurement Id/contract Id : 25ia0116 Contract Name : Completion Of Multi-purpose Building, Barangay Trabugan, Maripipi, Biliran Contract Location : Brgy. Trabugan, Maripipi, Biliran (11.779571˚, 124.299212˚) Project Description/scope Of Work : Completion Of 1-storey Building Approved Budget For The Contract : P 1,978,412.59 Contract Duration : 70.00 C.d. Cost Of Bidding Documents : P 5,000.00 Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of Small B & Medium A As Per Pcab Resolution No. 201, Series Of 2017, (b) Completion Of A Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc. Contractors/applicants Who Wish To Participate In The Biding Are Encouraged To Enroll With The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Building, Bonifacio Drive, Port Area Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From Dpwh, Biliran District Engineering Office, Naval, Biliran And Inspect The Bidding Documents At The Address Given Below From 8:00a.m. To 5:00 P.m. Page 4 Of 4 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of An Applicable Fee For The Bidding Documents In The Amount Stated Above. Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of The R.a. 9184 And Its Irr. Bidders Can Make Payments For The Purchase Of Bidding Documents At Any Dpwh Field Offices. The Schedule Of Key Procurement Activities For This Contract Is Shown Below: Activity Time Place Date Of Posting December 6, 2024 – December 26, 2024 Dpwh Web / Philgeps / Bulletin Board Issuance Of Bidding Documents December 6, 2024 – December 26, 2024 Bac Office, Biliran-deo, Naval, Biliran Pre-bid Conference December 13, 2024; 10:00 A.m. Bac Conference Room, Biliran-deo, Naval, Biliran Receipt By The Bac Of Bids December 26, 2024, 1:00 P.m. Bac Office, Biliran-deo, Naval, Biliran Opening Of Bids December 26, 2024; 1:00 P.m. Conference Room, Biliran-deo, Naval, Biliran 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That The Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. Pre-bid Conference And Opening Of Bids Will Be Held At The Bac Office, Dpwh-biliran District Engineering Office, Naval, Biliran Which Shall Be Open To All Interested Parties. Bidding For The Above Contract Shall Be Conducted “short Of Award” Pending Availability/ Receipt Of Fy-2025 Funds/saa. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_biliran For Electronic Submission On Or Before December 26, 2024 At 1:00 P.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On December 26, 2024 At 1:00 P.m. Immediately After The Deadline Of The Dropping Of Bids At Bac Conference Room, Biliran-deo, Naval, Biliran. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh-biliran District Engineering Office, Naval, Biliran Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of R.a. 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Head, Bac Secretariat Bac Office, Dpwh Biliran District Engineering Office Brgy. Calumpang, Naval, Biliran Province Telefax No.: (053) 500-9097 Email Add: Dpwh.bdeo@gmail.com Approved: Rosario B. Rosete Assistant District Engineer Bac Chairperson Noted: Irwin L. Antonio, Asean Eng. Oic-district Engineer encoded/printedbyrcpancito December 5, 2024

Details: Description Invitation To Bid December 5, 2024 1. The Dpwh–biliran District Engineering Office, Through Gaa Fy-2025, Intends To Apply The Sum Of The Approved Budget For The Contract (abc) Stated Below Being The Abc To Payments Under The Contracts Below. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening And Declared Non-complying/failed. 2. The Dpwh–biliran District Engineering Office, Through Its Bids And Awards Committee (bac) Now Invites Bids For The Hereunder Works Of The Following Contract/s: 1. Procurement Id/contract Id : 25ia0104 Contract Name : Installation/application Of Road Safety Facilities - Naval-caibiran Cross Country Rd - K1027+000 - K1031+530 Contract Location : Naval, Biliran (11.565233°, 124.404044°- 11.578701°, 124.441236°) Project Description/scope Of Work : Installation Of 181 Units Of Solar Street Lights Approved Budget For The Contract : P 29,398,224.41 Contract Duration : 130.00 C.d. Cost Of Bidding Documents : P 25,000.00 2. Procurement Id/contract Id : 25ia0105 Contract Name : Construction Of Access Roads Leading To Declared Tourism Destinations - Access Road Leading To Subing Subing Hill, Kawayan, Biliran Contract Location : Brgy. Balacson, Kawayan, Biliran 11.669727, 124.344403 - 11.671273, 124.343774 (location 1) 11.675592, 124.343897 - 11.676395, 124.343767 (location 2) Project Description/scope Of Work : Construction Of 0.746 Lane Kilometer Road, 0.23m Thick & 6.10m Width With Embankment, Drainage, And Slope Protection Structure Approved Budget For The Contract : P 19,598,031.50 Contract Duration : 160.00 Cd Cost Of Bidding Documents : P 25,000.00 3. Procurement Id/contract Id : 25ia0106 Contract Name : Construction Of Drainage, Barangay Calumpang, Naval, Biliran Contract Location : Brgy. Calumpang, Naval, Biliran Location 1 - (11.568507°, 124.412067° - 11.570055°, 124.41164°) Location 2 - (11.569489°, 124.411632° - 11.569495°, 124.41162°) Project Description/scope Of Work : Construction Of 616.70 Ln.m Open Drainage (lined Canal) W/ Metal Frames And Gratings Approved Budget For The Contract : P 4,948,200.18 Contract Duration : 85.00 C.d. Cost Of Bidding Documents : P 5,000.00 Page 2 Of 4 4. Procurement Id/contract Id : 25ia0107 Contract Name : Construction Of Seawall, Barangay Mabini, Naval, Biliran Contract Location : Brgy. Mabini, Naval, Biliran (11.564381°, 124.275058° - 11.564806°, 124.274625°) Project Description/scope Of Work : Construction Of 93.20 Ln.m. Seawall Structure With Reinforced Concrete Facing Approved Budget For The Contract : P 9,898,256.03 Contract Duration : 165.00 C.d. Cost Of Bidding Documents : P 10,000.00 5. Procurement Id/contract Id : 25ia0108 Contract Name : Construction Of Bagongbong Flood Control, Barangay Salangi, Almeria, Biliran Contract Location : Almeria, Biliran (124.394165°, 11.621246° - 124.394360°, 11.623738°) Project Description/scope Of Work : Construction Of 334.00 Ln.m. Flood Control Structure Approved Budget For The Contract : P 19,598,391.73 Contract Duration : 143.00 C.d. Cost Of Bidding Documents : P 25,000.00 6. Procurement Id/contract Id : 25ia0109 Contract Name : Construction Of Flood Control Structure, Barangay Casiawan, Cabucgayan, Biliran Contract Location : Cabucgayan, Biliran (124.573765°, 11.484283° - 124.575893°, 11.486335°) Project Description/scope Of Work : Construction Of 424.00 Ln.m. Flood Control Structure Approved Budget For The Contract : P 19,598,372.48 Contract Duration : 143.00 C.d. Cost Of Bidding Documents : P 25,000.00 7. Procurement Id/contract Id : 25ia0110 Contract Name : Construction Two-storey Office Building, Dpwh Biliran Deo, Bureau Of Equipment, 8th Res, Barangay Larrazabal, Naval, Biliran Contract Location : Brgy. Larrazabal, Naval, Biliran (11.583267, 124.409843 & 11.58306, 124.409215) Project Description/scope Of Work : Construction Of 2-storey Building Approved Budget For The Contract : P 48,998,346.17 Contract Duration : 250.00 C.d. Cost Of Bidding Documents : P 25,000.00 8. Procurement Id/contract Id : 25ia0111 Contract Name : Construction Of Multi-purpose Building, Barangay Matanggo, Almeria, Biliran Contract Location : Barangay Matanggo, Almeria, Biliran (11.647594, 124.124.368010) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,276.36 Contract Duration : 140.00 C.d. Cost Of Bidding Documents : P 5,000.00 9. Procurement Id/contract Id : 25ia0112 Contract Name : Construction Of Multi-purpose Building,barangay, P.i. Garcia, Naval, Biliran Contract Location : Brgy. P.i. Garcia, Naval, Biliran (11.563721, 124.395253) Project Description/scope Of Work : Construction Of 2-storey Building Approved Budget For The Contract : P 4,898,328.55 Contract Duration : 180.00 C.d. Cost Of Bidding Documents : P 5,000.00 Page 3 Of 4 10. Procurement Id/contract Id : 25ia0113 Contract Name : Construction (completion) Of Multi-purpose Building, Barangay Pulang Bato, Almeria, Biliran Contract Location : Barangay Pulang Bato, Almeria, Biliran (11.600953, 124.390656) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,276.06 Contract Duration : 140.00 C.d. Cost Of Bidding Documents : P 5,000.00 11. Procurement Id/contract Id : 25ia0114 Contract Name : Construction Of Multi-purpose Building, Barangay Union, Caibiran, Biliran Contract Location : Brgy.union, Caibiran, Biliran (11.56519194⁰, 124.55213936⁰) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,219.25 Contract Duration : 125.00 C.d. Cost Of Bidding Documents : P 5,000.00 12. Procurement Id/contract Id : 25ia0115 Contract Name : Construction (completion) Of Multi-purpose Building, Barangay Binohangan, Caibiran, Biliran Contract Location : Brgy. Binohangan, Caibiran, Biliran (11.596326˚, 124.570058˚) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 1,978,469.83 Contract Duration : 75.00 C.d. Cost Of Bidding Documents : P 5,000.00 13. Procurement Id/contract Id : 25ia0116 Contract Name : Completion Of Multi-purpose Building, Barangay Trabugan, Maripipi, Biliran Contract Location : Brgy. Trabugan, Maripipi, Biliran (11.779571˚, 124.299212˚) Project Description/scope Of Work : Completion Of 1-storey Building Approved Budget For The Contract : P 1,978,412.59 Contract Duration : 70.00 C.d. Cost Of Bidding Documents : P 5,000.00 Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of Small B & Medium A As Per Pcab Resolution No. 201, Series Of 2017, (b) Completion Of A Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc. Contractors/applicants Who Wish To Participate In The Biding Are Encouraged To Enroll With The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Building, Bonifacio Drive, Port Area Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From Dpwh, Biliran District Engineering Office, Naval, Biliran And Inspect The Bidding Documents At The Address Given Below From 8:00a.m. To 5:00 P.m. Page 4 Of 4 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of An Applicable Fee For The Bidding Documents In The Amount Stated Above. Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of The R.a. 9184 And Its Irr. Bidders Can Make Payments For The Purchase Of Bidding Documents At Any Dpwh Field Offices. The Schedule Of Key Procurement Activities For This Contract Is Shown Below: Activity Time Place Date Of Posting December 6, 2024 – December 26, 2024 Dpwh Web / Philgeps / Bulletin Board Issuance Of Bidding Documents December 6, 2024 – December 26, 2024 Bac Office, Biliran-deo, Naval, Biliran Pre-bid Conference December 13, 2024; 10:00 A.m. Bac Conference Room, Biliran-deo, Naval, Biliran Receipt By The Bac Of Bids December 26, 2024, 1:00 P.m. Bac Office, Biliran-deo, Naval, Biliran Opening Of Bids December 26, 2024; 1:00 P.m. Conference Room, Biliran-deo, Naval, Biliran 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That The Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. Pre-bid Conference And Opening Of Bids Will Be Held At The Bac Office, Dpwh-biliran District Engineering Office, Naval, Biliran Which Shall Be Open To All Interested Parties. Bidding For The Above Contract Shall Be Conducted “short Of Award” Pending Availability/ Receipt Of Fy-2025 Funds/saa. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_biliran For Electronic Submission On Or Before December 26, 2024 At 1:00 P.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On December 26, 2024 At 1:00 P.m. Immediately After The Deadline Of The Dropping Of Bids At Bac Conference Room, Biliran-deo, Naval, Biliran. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh-biliran District Engineering Office, Naval, Biliran Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of R.a. 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Head, Bac Secretariat Bac Office, Dpwh Biliran District Engineering Office Brgy. Calumpang, Naval, Biliran Province Telefax No.: (053) 500-9097 Email Add: Dpwh.bdeo@gmail.com Approved: Rosario B. Rosete Assistant District Engineer Bac Chairperson Noted: Irwin L. Antonio, Asean Eng. Oic-district Engineer encoded/printedbyrcpancito December 5, 2024

Details: Description Invitation To Bid December 5, 2024 1. The Dpwh–biliran District Engineering Office, Through Gaa Fy-2025, Intends To Apply The Sum Of The Approved Budget For The Contract (abc) Stated Below Being The Abc To Payments Under The Contracts Below. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening And Declared Non-complying/failed. 2. The Dpwh–biliran District Engineering Office, Through Its Bids And Awards Committee (bac) Now Invites Bids For The Hereunder Works Of The Following Contract/s: 1. Procurement Id/contract Id : 25ia0104 Contract Name : Installation/application Of Road Safety Facilities - Naval-caibiran Cross Country Rd - K1027+000 - K1031+530 Contract Location : Naval, Biliran (11.565233°, 124.404044°- 11.578701°, 124.441236°) Project Description/scope Of Work : Installation Of 181 Units Of Solar Street Lights Approved Budget For The Contract : P 29,398,224.41 Contract Duration : 130.00 C.d. Cost Of Bidding Documents : P 25,000.00 2. Procurement Id/contract Id : 25ia0105 Contract Name : Construction Of Access Roads Leading To Declared Tourism Destinations - Access Road Leading To Subing Subing Hill, Kawayan, Biliran Contract Location : Brgy. Balacson, Kawayan, Biliran 11.669727, 124.344403 - 11.671273, 124.343774 (location 1) 11.675592, 124.343897 - 11.676395, 124.343767 (location 2) Project Description/scope Of Work : Construction Of 0.746 Lane Kilometer Road, 0.23m Thick & 6.10m Width With Embankment, Drainage, And Slope Protection Structure Approved Budget For The Contract : P 19,598,031.50 Contract Duration : 160.00 Cd Cost Of Bidding Documents : P 25,000.00 3. Procurement Id/contract Id : 25ia0106 Contract Name : Construction Of Drainage, Barangay Calumpang, Naval, Biliran Contract Location : Brgy. Calumpang, Naval, Biliran Location 1 - (11.568507°, 124.412067° - 11.570055°, 124.41164°) Location 2 - (11.569489°, 124.411632° - 11.569495°, 124.41162°) Project Description/scope Of Work : Construction Of 616.70 Ln.m Open Drainage (lined Canal) W/ Metal Frames And Gratings Approved Budget For The Contract : P 4,948,200.18 Contract Duration : 85.00 C.d. Cost Of Bidding Documents : P 5,000.00 Page 2 Of 4 4. Procurement Id/contract Id : 25ia0107 Contract Name : Construction Of Seawall, Barangay Mabini, Naval, Biliran Contract Location : Brgy. Mabini, Naval, Biliran (11.564381°, 124.275058° - 11.564806°, 124.274625°) Project Description/scope Of Work : Construction Of 93.20 Ln.m. Seawall Structure With Reinforced Concrete Facing Approved Budget For The Contract : P 9,898,256.03 Contract Duration : 165.00 C.d. Cost Of Bidding Documents : P 10,000.00 5. Procurement Id/contract Id : 25ia0108 Contract Name : Construction Of Bagongbong Flood Control, Barangay Salangi, Almeria, Biliran Contract Location : Almeria, Biliran (124.394165°, 11.621246° - 124.394360°, 11.623738°) Project Description/scope Of Work : Construction Of 334.00 Ln.m. Flood Control Structure Approved Budget For The Contract : P 19,598,391.73 Contract Duration : 143.00 C.d. Cost Of Bidding Documents : P 25,000.00 6. Procurement Id/contract Id : 25ia0109 Contract Name : Construction Of Flood Control Structure, Barangay Casiawan, Cabucgayan, Biliran Contract Location : Cabucgayan, Biliran (124.573765°, 11.484283° - 124.575893°, 11.486335°) Project Description/scope Of Work : Construction Of 424.00 Ln.m. Flood Control Structure Approved Budget For The Contract : P 19,598,372.48 Contract Duration : 143.00 C.d. Cost Of Bidding Documents : P 25,000.00 7. Procurement Id/contract Id : 25ia0110 Contract Name : Construction Two-storey Office Building, Dpwh Biliran Deo, Bureau Of Equipment, 8th Res, Barangay Larrazabal, Naval, Biliran Contract Location : Brgy. Larrazabal, Naval, Biliran (11.583267, 124.409843 & 11.58306, 124.409215) Project Description/scope Of Work : Construction Of 2-storey Building Approved Budget For The Contract : P 48,998,346.17 Contract Duration : 250.00 C.d. Cost Of Bidding Documents : P 25,000.00 8. Procurement Id/contract Id : 25ia0111 Contract Name : Construction Of Multi-purpose Building, Barangay Matanggo, Almeria, Biliran Contract Location : Barangay Matanggo, Almeria, Biliran (11.647594, 124.124.368010) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,276.36 Contract Duration : 140.00 C.d. Cost Of Bidding Documents : P 5,000.00 9. Procurement Id/contract Id : 25ia0112 Contract Name : Construction Of Multi-purpose Building,barangay, P.i. Garcia, Naval, Biliran Contract Location : Brgy. P.i. Garcia, Naval, Biliran (11.563721, 124.395253) Project Description/scope Of Work : Construction Of 2-storey Building Approved Budget For The Contract : P 4,898,328.55 Contract Duration : 180.00 C.d. Cost Of Bidding Documents : P 5,000.00 Page 3 Of 4 10. Procurement Id/contract Id : 25ia0113 Contract Name : Construction (completion) Of Multi-purpose Building, Barangay Pulang Bato, Almeria, Biliran Contract Location : Barangay Pulang Bato, Almeria, Biliran (11.600953, 124.390656) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,276.06 Contract Duration : 140.00 C.d. Cost Of Bidding Documents : P 5,000.00 11. Procurement Id/contract Id : 25ia0114 Contract Name : Construction Of Multi-purpose Building, Barangay Union, Caibiran, Biliran Contract Location : Brgy.union, Caibiran, Biliran (11.56519194⁰, 124.55213936⁰) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,219.25 Contract Duration : 125.00 C.d. Cost Of Bidding Documents : P 5,000.00 12. Procurement Id/contract Id : 25ia0115 Contract Name : Construction (completion) Of Multi-purpose Building, Barangay Binohangan, Caibiran, Biliran Contract Location : Brgy. Binohangan, Caibiran, Biliran (11.596326˚, 124.570058˚) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 1,978,469.83 Contract Duration : 75.00 C.d. Cost Of Bidding Documents : P 5,000.00 13. Procurement Id/contract Id : 25ia0116 Contract Name : Completion Of Multi-purpose Building, Barangay Trabugan, Maripipi, Biliran Contract Location : Brgy. Trabugan, Maripipi, Biliran (11.779571˚, 124.299212˚) Project Description/scope Of Work : Completion Of 1-storey Building Approved Budget For The Contract : P 1,978,412.59 Contract Duration : 70.00 C.d. Cost Of Bidding Documents : P 5,000.00 Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of Small B & Medium A As Per Pcab Resolution No. 201, Series Of 2017, (b) Completion Of A Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc. Contractors/applicants Who Wish To Participate In The Biding Are Encouraged To Enroll With The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Building, Bonifacio Drive, Port Area Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From Dpwh, Biliran District Engineering Office, Naval, Biliran And Inspect The Bidding Documents At The Address Given Below From 8:00a.m. To 5:00 P.m. Page 4 Of 4 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of An Applicable Fee For The Bidding Documents In The Amount Stated Above. Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of The R.a. 9184 And Its Irr. Bidders Can Make Payments For The Purchase Of Bidding Documents At Any Dpwh Field Offices. The Schedule Of Key Procurement Activities For This Contract Is Shown Below: Activity Time Place Date Of Posting December 6, 2024 – December 26, 2024 Dpwh Web / Philgeps / Bulletin Board Issuance Of Bidding Documents December 6, 2024 – December 26, 2024 Bac Office, Biliran-deo, Naval, Biliran Pre-bid Conference December 13, 2024; 10:00 A.m. Bac Conference Room, Biliran-deo, Naval, Biliran Receipt By The Bac Of Bids December 26, 2024, 1:00 P.m. Bac Office, Biliran-deo, Naval, Biliran Opening Of Bids December 26, 2024; 1:00 P.m. Conference Room, Biliran-deo, Naval, Biliran 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That The Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. Pre-bid Conference And Opening Of Bids Will Be Held At The Bac Office, Dpwh-biliran District Engineering Office, Naval, Biliran Which Shall Be Open To All Interested Parties. Bidding For The Above Contract Shall Be Conducted “short Of Award” Pending Availability/ Receipt Of Fy-2025 Funds/saa. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_biliran For Electronic Submission On Or Before December 26, 2024 At 1:00 P.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On December 26, 2024 At 1:00 P.m. Immediately After The Deadline Of The Dropping Of Bids At Bac Conference Room, Biliran-deo, Naval, Biliran. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh-biliran District Engineering Office, Naval, Biliran Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of R.a. 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Head, Bac Secretariat Bac Office, Dpwh Biliran District Engineering Office Brgy. Calumpang, Naval, Biliran Province Telefax No.: (053) 500-9097 Email Add: Dpwh.bdeo@gmail.com Approved: Rosario B. Rosete Assistant District Engineer Bac Chairperson Noted: Irwin L. Antonio, Asean Eng. Oic-district Engineer encoded/printedbyrcpancito December 5, 2024

Description: Contact Information|4|n774.5|bv3|717-605-1362|yenstephanie.tran@navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| production Lot Testing|1|120| general Information-fob-destination|1|n42794| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Report (combo)||to Be Determined|n00104|to Be Determined|to Be Determined|to Be Determined|to Be Determined|||to Be Determined|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss Mechanicsburg| equal Opportunity (sep 2016)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (may 2024)|13|333998|700|x|x|||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| 1. This Is A Navy Buy. 2. The Ultimate Awardee Of The Proposed Contract Action Must Be An Authorized Source. Award Of The Proposed Contract Action Will Not Be Delayed While An Unauthorized Source Seeks To Obtain Authorization. 3. Quotes Shall Be Emailed To Yenstephanie.tran@navy.mil. 4. Fob Destination. Quotes Shall Include Shipping Costs For Shipment Of Units To Destination. 5. Production Lot Testing Applies For The Requirement. 6. The Eod Technician Has 90 Days In Which To Test/inspect/accept The Production Quantity. The Contract Administrator Has An Additional 30 Days In Which To Notify The Contractor Of The Results; Total 120 Days.inspection At Origin acceptance At Destination \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The O-ring, Altered . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. document Ref Data=mil-std-1330 | | |d |960920|a| | | document Ref Data=mil-dtl-19595 | | |d |030211|a| | | 3. Requirements 3.1 Cage Code/reference Number Items - The O-ring, Altered Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;99251 L1106-1-008; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Production Lot Approval (government Testing) - Production Lot Test And Approval Is Required. 3.4 Non-magnetic Inspection Shall Be In Accordance With Mil-dtl-19595. 3.5 The Contractor Shall Notify The Government Testing Activity ;30; Days Prior To Shipment Of Material To Be Tested. 3.6 Oxygen/nitrogen Cleaning - Cleaning Shall Be In Accordance With Mil-std-1330. as Of March 07, 2019, Per The Isea For Items Supplied By Mission davenport (cobham) Who Own All The Technical Data Needed For The manufacturing Of This Item. 3.7 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Number Change Only - If The Manufacturer's Part Number Indicated Has changed, But The Parts Are Identical In All Respects, Supply The Item And advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 4.4 Production Lot Test - The Contractor Shall Deliver ;all; Unit(s) To ;naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology Division Indian Head, Md 20640-5070, Attn: Cory Legagneux.; For 100% Production Lot Testing In accordance With ;for All Requirements For Part Number L1106-1-008 And All Associated Specifications.; . Upon Satisfactory Completion Of The Production Lot Test, The Government Facility Shall Prepare And Package The Unit(s) For Transshipment To Final Shipment Destination(s) In Accordance With The Requirements Of This Contract/purchase Order. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer. 6.3 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.4 ;all Vendors Are Required To Submit Material C Of C's On All First Article (fa) And Production Lot Testing (plt) Materials Arriving For Final Acceptance Inspection.; 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The O-ring, Altered . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. document Ref Data=mil-std-1330 | | |d |960920|a| | | document Ref Data=mil-dtl-19595 | | |d |030211|a| | | 3. Requirements 3.1 Cage Code/reference Number Items - The O-ring, Altered Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;99251 L1106-2-125; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Production Lot Approval (government Testing) - Production Lot Test And Approval Is Required. 3.4 Non-magnetic Inspection Shall Be In Accordance With Mil-dtl-19595. 3.5 The Contractor Shall Notify The Government Testing Activity ;30; Days Prior To Shipment Of Material To Be Tested. 3.6 Oxygen/nitrogen Cleaning - Cleaning Shall Be In Accordance With Mil-std-1330. as Of March 07, 2019, Per The Isea For Items Supplied By Mission davenport (cobham) Who Own All The Technical Data Needed For The manufacturing Of This Item. 3.7 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Number Change Only - If The Manufacturer's Part Number Indicated Has changed, But The Parts Are Identical In All Respects, Supply The Item And advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 4.4 Production Lot Test - The Contractor Shall Deliver ;all; Unit(s) To ;naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology Division Indian Head, Md 20640-5070, Attn: Cory Legagneux.; For 100% Production Lot Testing In accordance With ;for All Requirements For Part Number L1106-2-125 And All Associated Specifications.; . Upon Satisfactory Completion Of The Production Lot Test, The Government Facility Shall Prepare And Package The Unit(s) For Transshipment To Final Shipment Destination(s) In Accordance With The Requirements Of This Contract/purchase Order. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer. 6.3 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.4 ;all Vendors Are Required To Submit Material C Of C's On All First Article (fa) And Production Lot Testing (plt) Materials Arriving For Final Acceptance Inspection.; 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The O-ring, Altered . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. document Ref Data=mil-std-1330 | | |d |960920|a| | | document Ref Data=mil-dtl-19595 | | |d |030211|a| | | 3. Requirements 3.1 Cage Code/reference Number Items - The O-ring, Altered Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;99251 L1106-1-114; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Non-magnetic Inspection Shall Be In Accordance With Mil-dtl-19595. 3.4 Production Lot Approval (government Testing) - Production Lot Test And Approval Is Required. 3.5 The Contractor Shall Notify The Government Testing Activity ;30; Days Prior To Shipment Of Material To Be Tested. 3.6 Oxygen/nitrogen Cleaning - Cleaning Shall Be In Accordance With Mil-std-1330. as Of March 07, 2019, Per The Isea For Items Supplied By Mission davenport (cobham) Who Own All The Technical Data Needed For The manufacturing Of This Item. 3.7 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Number Change Only - If The Manufacturer's Part Number Indicated Has changed, But The Parts Are Identical In All Respects, Supply The Item And advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 4.4 Production Lot Test - The Contractor Shall Deliver ;all; Unit(s) To ;naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology Division Indian Head, Md 20640-5070, Attn: Cory Legagneux.; For 100% Production Lot Testing In accordance With ;for All Requirements For Part Number L1106-1-114 And All Associated Specifications.; . Upon Satisfactory Completion Of The Production Lot Test, The Government Facility Shall Prepare And Package The Unit(s) For Transshipment To Final Shipment Destination(s) In Accordance With The Requirements Of This Contract/purchase Order. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer. 6.3 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.4 ;all Vendors Are Required To Submit Material C Of C's On All First Article (fa) And Production Lot Testing (plt) Materials Arriving For Final Acceptance Inspection.; 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The O-ring . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. document Ref Data=mil-std-1330 | | |d |960920|a| | | document Ref Data=mil-dtl-19595 | | |d |030211|a| | | 3. Requirements 3.1 Cage Code/reference Number Items - The O-ring Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;99251 1113-117; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Production Lot Approval (government Testing) - Production Lot Test And Approval Is Required. 3.4 Non-magnetic Inspection Shall Be In Accordance With Mil-dtl-19595. 3.5 The Contractor Shall Notify The Government Testing Activity ;30; Days Prior To Shipment Of Material To Be Tested. 3.6 Oxygen/nitrogen Cleaning - Cleaning Shall Be In Accordance With Mil-std-1330. as Of March 07, 2019, Per The Isea For Items Supplied By Mission davenport (cobham) Who Own All The Technical Data Needed For The manufacturing Of This Item. 3.7 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Number Change Only - If The Manufacturer's Part Number Indicated Has changed, But The Parts Are Identical In All Respects, Supply The Item And advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 4.4 Production Lot Test - The Contractor Shall Deliver ;all; Unit(s) To ;naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology Division Indian Head, Md 20640-5070, Attn: Cory Legagneux.; For 100% Production Lot Testing In accordance With ;for All Requirements For Part Number 1113-117 And All Associated Specifications.; . Upon Satisfactory Completion Of The Production Lot Test, The Government Facility Shall Prepare And Package The Unit(s) For Transshipment To Final Shipment Destination(s) In Accordance With The Requirements Of This Contract/purchase Order. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer. 6.3 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.4 ;all Vendors Are Required To Submit Material C Of C?s On All First Article (fa) And Production Lot Testing (plt) Materials Arriving For Final Acceptance Inspection.; 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The O-ring . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. document Ref Data=mil-std-1330 | | |d |960920|a| | | document Ref Data=mil-dtl-19595 | | |d |030211|a| | | 3. Requirements 3.1 Cage Code/reference Number Items - The O-ring Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;99251 1100-135; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Production Lot Approval (government Testing) - Production Lot Test And Approval Is Required. 3.4 Non-magnetic Inspection Shall Be In Accordance With Mil-dtl-19595. 3.5 The Contractor Shall Notify The Government Testing Activity ;30; Days Prior To Shipment Of Material To Be Tested. 3.6 Oxygen/nitrogen Cleaning - Cleaning Shall Be In Accordance With Mil-std-1330. as Of March 07, 2019, Per The Isea For Items Supplied By Mission davenport (cobham) Who Own All The Technical Data Needed For The manufacturing Of This Item. 3.7 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Number Change Only - If The Manufacturer's Part Number Indicated Has changed, But The Parts Are Identical In All Respects, Supply The Item And advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 4.4 Production Lot Test - The Contractor Shall Deliver ;all; Unit(s) To ;naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology Division Indian Head, Md 20640-5070, Attn: Cory Legagneux.; For 100% Production Lot Testing In accordance With ;for All Requirements For Part Number 1100-135 And All Associated Specifications.; . Upon Satisfactory Completion Of The Production Lot Test, The Government Facility Shall Prepare And Package The Unit(s) For Transshipment To Final Shipment Destination(s) In Accordance With The Requirements Of This Contract/purchase Order. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer. 6.3 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.4 ;all Vendors Are Required To Submit Material C Of C's On All First Article (fa) And Production Lot Testing (plt) Materials Arriving For Final Acceptance Inspection.;

Details: Description Invitation To Bid December 5, 2024 1. The Dpwh–biliran District Engineering Office, Through Gaa Fy-2025, Intends To Apply The Sum Of The Approved Budget For The Contract (abc) Stated Below Being The Abc To Payments Under The Contracts Below. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening And Declared Non-complying/failed. 2. The Dpwh–biliran District Engineering Office, Through Its Bids And Awards Committee (bac) Now Invites Bids For The Hereunder Works Of The Following Contract/s: 1. Procurement Id/contract Id : 25ia0104 Contract Name : Installation/application Of Road Safety Facilities - Naval-caibiran Cross Country Rd - K1027+000 - K1031+530 Contract Location : Naval, Biliran (11.565233°, 124.404044°- 11.578701°, 124.441236°) Project Description/scope Of Work : Installation Of 181 Units Of Solar Street Lights Approved Budget For The Contract : P 29,398,224.41 Contract Duration : 130.00 C.d. Cost Of Bidding Documents : P 25,000.00 2. Procurement Id/contract Id : 25ia0105 Contract Name : Construction Of Access Roads Leading To Declared Tourism Destinations - Access Road Leading To Subing Subing Hill, Kawayan, Biliran Contract Location : Brgy. Balacson, Kawayan, Biliran 11.669727, 124.344403 - 11.671273, 124.343774 (location 1) 11.675592, 124.343897 - 11.676395, 124.343767 (location 2) Project Description/scope Of Work : Construction Of 0.746 Lane Kilometer Road, 0.23m Thick & 6.10m Width With Embankment, Drainage, And Slope Protection Structure Approved Budget For The Contract : P 19,598,031.50 Contract Duration : 160.00 Cd Cost Of Bidding Documents : P 25,000.00 3. Procurement Id/contract Id : 25ia0106 Contract Name : Construction Of Drainage, Barangay Calumpang, Naval, Biliran Contract Location : Brgy. Calumpang, Naval, Biliran Location 1 - (11.568507°, 124.412067° - 11.570055°, 124.41164°) Location 2 - (11.569489°, 124.411632° - 11.569495°, 124.41162°) Project Description/scope Of Work : Construction Of 616.70 Ln.m Open Drainage (lined Canal) W/ Metal Frames And Gratings Approved Budget For The Contract : P 4,948,200.18 Contract Duration : 85.00 C.d. Cost Of Bidding Documents : P 5,000.00 Page 2 Of 4 4. Procurement Id/contract Id : 25ia0107 Contract Name : Construction Of Seawall, Barangay Mabini, Naval, Biliran Contract Location : Brgy. Mabini, Naval, Biliran (11.564381°, 124.275058° - 11.564806°, 124.274625°) Project Description/scope Of Work : Construction Of 93.20 Ln.m. Seawall Structure With Reinforced Concrete Facing Approved Budget For The Contract : P 9,898,256.03 Contract Duration : 165.00 C.d. Cost Of Bidding Documents : P 10,000.00 5. Procurement Id/contract Id : 25ia0108 Contract Name : Construction Of Bagongbong Flood Control, Barangay Salangi, Almeria, Biliran Contract Location : Almeria, Biliran (124.394165°, 11.621246° - 124.394360°, 11.623738°) Project Description/scope Of Work : Construction Of 334.00 Ln.m. Flood Control Structure Approved Budget For The Contract : P 19,598,391.73 Contract Duration : 143.00 C.d. Cost Of Bidding Documents : P 25,000.00 6. Procurement Id/contract Id : 25ia0109 Contract Name : Construction Of Flood Control Structure, Barangay Casiawan, Cabucgayan, Biliran Contract Location : Cabucgayan, Biliran (124.573765°, 11.484283° - 124.575893°, 11.486335°) Project Description/scope Of Work : Construction Of 424.00 Ln.m. Flood Control Structure Approved Budget For The Contract : P 19,598,372.48 Contract Duration : 143.00 C.d. Cost Of Bidding Documents : P 25,000.00 7. Procurement Id/contract Id : 25ia0110 Contract Name : Construction Two-storey Office Building, Dpwh Biliran Deo, Bureau Of Equipment, 8th Res, Barangay Larrazabal, Naval, Biliran Contract Location : Brgy. Larrazabal, Naval, Biliran (11.583267, 124.409843 & 11.58306, 124.409215) Project Description/scope Of Work : Construction Of 2-storey Building Approved Budget For The Contract : P 48,998,346.17 Contract Duration : 250.00 C.d. Cost Of Bidding Documents : P 25,000.00 8. Procurement Id/contract Id : 25ia0111 Contract Name : Construction Of Multi-purpose Building, Barangay Matanggo, Almeria, Biliran Contract Location : Barangay Matanggo, Almeria, Biliran (11.647594, 124.124.368010) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,276.36 Contract Duration : 140.00 C.d. Cost Of Bidding Documents : P 5,000.00 9. Procurement Id/contract Id : 25ia0112 Contract Name : Construction Of Multi-purpose Building,barangay, P.i. Garcia, Naval, Biliran Contract Location : Brgy. P.i. Garcia, Naval, Biliran (11.563721, 124.395253) Project Description/scope Of Work : Construction Of 2-storey Building Approved Budget For The Contract : P 4,898,328.55 Contract Duration : 180.00 C.d. Cost Of Bidding Documents : P 5,000.00 Page 3 Of 4 10. Procurement Id/contract Id : 25ia0113 Contract Name : Construction (completion) Of Multi-purpose Building, Barangay Pulang Bato, Almeria, Biliran Contract Location : Barangay Pulang Bato, Almeria, Biliran (11.600953, 124.390656) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,276.06 Contract Duration : 140.00 C.d. Cost Of Bidding Documents : P 5,000.00 11. Procurement Id/contract Id : 25ia0114 Contract Name : Construction Of Multi-purpose Building, Barangay Union, Caibiran, Biliran Contract Location : Brgy.union, Caibiran, Biliran (11.56519194⁰, 124.55213936⁰) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,219.25 Contract Duration : 125.00 C.d. Cost Of Bidding Documents : P 5,000.00 12. Procurement Id/contract Id : 25ia0115 Contract Name : Construction (completion) Of Multi-purpose Building, Barangay Binohangan, Caibiran, Biliran Contract Location : Brgy. Binohangan, Caibiran, Biliran (11.596326˚, 124.570058˚) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 1,978,469.83 Contract Duration : 75.00 C.d. Cost Of Bidding Documents : P 5,000.00 13. Procurement Id/contract Id : 25ia0116 Contract Name : Completion Of Multi-purpose Building, Barangay Trabugan, Maripipi, Biliran Contract Location : Brgy. Trabugan, Maripipi, Biliran (11.779571˚, 124.299212˚) Project Description/scope Of Work : Completion Of 1-storey Building Approved Budget For The Contract : P 1,978,412.59 Contract Duration : 70.00 C.d. Cost Of Bidding Documents : P 5,000.00 Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of Small B & Medium A As Per Pcab Resolution No. 201, Series Of 2017, (b) Completion Of A Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc. Contractors/applicants Who Wish To Participate In The Biding Are Encouraged To Enroll With The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Building, Bonifacio Drive, Port Area Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From Dpwh, Biliran District Engineering Office, Naval, Biliran And Inspect The Bidding Documents At The Address Given Below From 8:00a.m. To 5:00 P.m. Page 4 Of 4 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of An Applicable Fee For The Bidding Documents In The Amount Stated Above. Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of The R.a. 9184 And Its Irr. Bidders Can Make Payments For The Purchase Of Bidding Documents At Any Dpwh Field Offices. The Schedule Of Key Procurement Activities For This Contract Is Shown Below: Activity Time Place Date Of Posting December 6, 2024 – December 26, 2024 Dpwh Web / Philgeps / Bulletin Board Issuance Of Bidding Documents December 6, 2024 – December 26, 2024 Bac Office, Biliran-deo, Naval, Biliran Pre-bid Conference December 13, 2024; 10:00 A.m. Bac Conference Room, Biliran-deo, Naval, Biliran Receipt By The Bac Of Bids December 26, 2024, 1:00 P.m. Bac Office, Biliran-deo, Naval, Biliran Opening Of Bids December 26, 2024; 1:00 P.m. Conference Room, Biliran-deo, Naval, Biliran 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That The Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. Pre-bid Conference And Opening Of Bids Will Be Held At The Bac Office, Dpwh-biliran District Engineering Office, Naval, Biliran Which Shall Be Open To All Interested Parties. Bidding For The Above Contract Shall Be Conducted “short Of Award” Pending Availability/ Receipt Of Fy-2025 Funds/saa. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_biliran For Electronic Submission On Or Before December 26, 2024 At 1:00 P.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On December 26, 2024 At 1:00 P.m. Immediately After The Deadline Of The Dropping Of Bids At Bac Conference Room, Biliran-deo, Naval, Biliran. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh-biliran District Engineering Office, Naval, Biliran Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of R.a. 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Head, Bac Secretariat Bac Office, Dpwh Biliran District Engineering Office Brgy. Calumpang, Naval, Biliran Province Telefax No.: (053) 500-9097 Email Add: Dpwh.bdeo@gmail.com Approved: Rosario B. Rosete Assistant District Engineer Bac Chairperson Noted: Irwin L. Antonio, Asean Eng. Oic-district Engineer encoded/printedbyrcpancito December 5, 2024

Details: Description Invitation To Bid December 5, 2024 1. The Dpwh–biliran District Engineering Office, Through Gaa Fy-2025, Intends To Apply The Sum Of The Approved Budget For The Contract (abc) Stated Below Being The Abc To Payments Under The Contracts Below. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening And Declared Non-complying/failed. 2. The Dpwh–biliran District Engineering Office, Through Its Bids And Awards Committee (bac) Now Invites Bids For The Hereunder Works Of The Following Contract/s: 1. Procurement Id/contract Id : 25ia0104 Contract Name : Installation/application Of Road Safety Facilities - Naval-caibiran Cross Country Rd - K1027+000 - K1031+530 Contract Location : Naval, Biliran (11.565233°, 124.404044°- 11.578701°, 124.441236°) Project Description/scope Of Work : Installation Of 181 Units Of Solar Street Lights Approved Budget For The Contract : P 29,398,224.41 Contract Duration : 130.00 C.d. Cost Of Bidding Documents : P 25,000.00 2. Procurement Id/contract Id : 25ia0105 Contract Name : Construction Of Access Roads Leading To Declared Tourism Destinations - Access Road Leading To Subing Subing Hill, Kawayan, Biliran Contract Location : Brgy. Balacson, Kawayan, Biliran 11.669727, 124.344403 - 11.671273, 124.343774 (location 1) 11.675592, 124.343897 - 11.676395, 124.343767 (location 2) Project Description/scope Of Work : Construction Of 0.746 Lane Kilometer Road, 0.23m Thick & 6.10m Width With Embankment, Drainage, And Slope Protection Structure Approved Budget For The Contract : P 19,598,031.50 Contract Duration : 160.00 Cd Cost Of Bidding Documents : P 25,000.00 3. Procurement Id/contract Id : 25ia0106 Contract Name : Construction Of Drainage, Barangay Calumpang, Naval, Biliran Contract Location : Brgy. Calumpang, Naval, Biliran Location 1 - (11.568507°, 124.412067° - 11.570055°, 124.41164°) Location 2 - (11.569489°, 124.411632° - 11.569495°, 124.41162°) Project Description/scope Of Work : Construction Of 616.70 Ln.m Open Drainage (lined Canal) W/ Metal Frames And Gratings Approved Budget For The Contract : P 4,948,200.18 Contract Duration : 85.00 C.d. Cost Of Bidding Documents : P 5,000.00 Page 2 Of 4 4. Procurement Id/contract Id : 25ia0107 Contract Name : Construction Of Seawall, Barangay Mabini, Naval, Biliran Contract Location : Brgy. Mabini, Naval, Biliran (11.564381°, 124.275058° - 11.564806°, 124.274625°) Project Description/scope Of Work : Construction Of 93.20 Ln.m. Seawall Structure With Reinforced Concrete Facing Approved Budget For The Contract : P 9,898,256.03 Contract Duration : 165.00 C.d. Cost Of Bidding Documents : P 10,000.00 5. Procurement Id/contract Id : 25ia0108 Contract Name : Construction Of Bagongbong Flood Control, Barangay Salangi, Almeria, Biliran Contract Location : Almeria, Biliran (124.394165°, 11.621246° - 124.394360°, 11.623738°) Project Description/scope Of Work : Construction Of 334.00 Ln.m. Flood Control Structure Approved Budget For The Contract : P 19,598,391.73 Contract Duration : 143.00 C.d. Cost Of Bidding Documents : P 25,000.00 6. Procurement Id/contract Id : 25ia0109 Contract Name : Construction Of Flood Control Structure, Barangay Casiawan, Cabucgayan, Biliran Contract Location : Cabucgayan, Biliran (124.573765°, 11.484283° - 124.575893°, 11.486335°) Project Description/scope Of Work : Construction Of 424.00 Ln.m. Flood Control Structure Approved Budget For The Contract : P 19,598,372.48 Contract Duration : 143.00 C.d. Cost Of Bidding Documents : P 25,000.00 7. Procurement Id/contract Id : 25ia0110 Contract Name : Construction Two-storey Office Building, Dpwh Biliran Deo, Bureau Of Equipment, 8th Res, Barangay Larrazabal, Naval, Biliran Contract Location : Brgy. Larrazabal, Naval, Biliran (11.583267, 124.409843 & 11.58306, 124.409215) Project Description/scope Of Work : Construction Of 2-storey Building Approved Budget For The Contract : P 48,998,346.17 Contract Duration : 250.00 C.d. Cost Of Bidding Documents : P 25,000.00 8. Procurement Id/contract Id : 25ia0111 Contract Name : Construction Of Multi-purpose Building, Barangay Matanggo, Almeria, Biliran Contract Location : Barangay Matanggo, Almeria, Biliran (11.647594, 124.124.368010) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,276.36 Contract Duration : 140.00 C.d. Cost Of Bidding Documents : P 5,000.00 9. Procurement Id/contract Id : 25ia0112 Contract Name : Construction Of Multi-purpose Building,barangay, P.i. Garcia, Naval, Biliran Contract Location : Brgy. P.i. Garcia, Naval, Biliran (11.563721, 124.395253) Project Description/scope Of Work : Construction Of 2-storey Building Approved Budget For The Contract : P 4,898,328.55 Contract Duration : 180.00 C.d. Cost Of Bidding Documents : P 5,000.00 Page 3 Of 4 10. Procurement Id/contract Id : 25ia0113 Contract Name : Construction (completion) Of Multi-purpose Building, Barangay Pulang Bato, Almeria, Biliran Contract Location : Barangay Pulang Bato, Almeria, Biliran (11.600953, 124.390656) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,276.06 Contract Duration : 140.00 C.d. Cost Of Bidding Documents : P 5,000.00 11. Procurement Id/contract Id : 25ia0114 Contract Name : Construction Of Multi-purpose Building, Barangay Union, Caibiran, Biliran Contract Location : Brgy.union, Caibiran, Biliran (11.56519194⁰, 124.55213936⁰) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,219.25 Contract Duration : 125.00 C.d. Cost Of Bidding Documents : P 5,000.00 12. Procurement Id/contract Id : 25ia0115 Contract Name : Construction (completion) Of Multi-purpose Building, Barangay Binohangan, Caibiran, Biliran Contract Location : Brgy. Binohangan, Caibiran, Biliran (11.596326˚, 124.570058˚) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 1,978,469.83 Contract Duration : 75.00 C.d. Cost Of Bidding Documents : P 5,000.00 13. Procurement Id/contract Id : 25ia0116 Contract Name : Completion Of Multi-purpose Building, Barangay Trabugan, Maripipi, Biliran Contract Location : Brgy. Trabugan, Maripipi, Biliran (11.779571˚, 124.299212˚) Project Description/scope Of Work : Completion Of 1-storey Building Approved Budget For The Contract : P 1,978,412.59 Contract Duration : 70.00 C.d. Cost Of Bidding Documents : P 5,000.00 Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of Small B & Medium A As Per Pcab Resolution No. 201, Series Of 2017, (b) Completion Of A Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc. Contractors/applicants Who Wish To Participate In The Biding Are Encouraged To Enroll With The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Building, Bonifacio Drive, Port Area Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From Dpwh, Biliran District Engineering Office, Naval, Biliran And Inspect The Bidding Documents At The Address Given Below From 8:00a.m. To 5:00 P.m. Page 4 Of 4 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of An Applicable Fee For The Bidding Documents In The Amount Stated Above. Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of The R.a. 9184 And Its Irr. Bidders Can Make Payments For The Purchase Of Bidding Documents At Any Dpwh Field Offices. The Schedule Of Key Procurement Activities For This Contract Is Shown Below: Activity Time Place Date Of Posting December 6, 2024 – December 26, 2024 Dpwh Web / Philgeps / Bulletin Board Issuance Of Bidding Documents December 6, 2024 – December 26, 2024 Bac Office, Biliran-deo, Naval, Biliran Pre-bid Conference December 13, 2024; 10:00 A.m. Bac Conference Room, Biliran-deo, Naval, Biliran Receipt By The Bac Of Bids December 26, 2024, 1:00 P.m. Bac Office, Biliran-deo, Naval, Biliran Opening Of Bids December 26, 2024; 1:00 P.m. Conference Room, Biliran-deo, Naval, Biliran 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That The Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. Pre-bid Conference And Opening Of Bids Will Be Held At The Bac Office, Dpwh-biliran District Engineering Office, Naval, Biliran Which Shall Be Open To All Interested Parties. Bidding For The Above Contract Shall Be Conducted “short Of Award” Pending Availability/ Receipt Of Fy-2025 Funds/saa. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_biliran For Electronic Submission On Or Before December 26, 2024 At 1:00 P.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On December 26, 2024 At 1:00 P.m. Immediately After The Deadline Of The Dropping Of Bids At Bac Conference Room, Biliran-deo, Naval, Biliran. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh-biliran District Engineering Office, Naval, Biliran Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of R.a. 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Head, Bac Secretariat Bac Office, Dpwh Biliran District Engineering Office Brgy. Calumpang, Naval, Biliran Province Telefax No.: (053) 500-9097 Email Add: Dpwh.bdeo@gmail.com Approved: Rosario B. Rosete Assistant District Engineer Bac Chairperson Noted: Irwin L. Antonio, Asean Eng. Oic-district Engineer encoded/printedbyrcpancito December 5, 2024

Details: Description Invitation To Bid December 5, 2024 1. The Dpwh–biliran District Engineering Office, Through Gaa Fy-2025, Intends To Apply The Sum Of The Approved Budget For The Contract (abc) Stated Below Being The Abc To Payments Under The Contracts Below. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening And Declared Non-complying/failed. 2. The Dpwh–biliran District Engineering Office, Through Its Bids And Awards Committee (bac) Now Invites Bids For The Hereunder Works Of The Following Contract/s: 1. Procurement Id/contract Id : 25ia0104 Contract Name : Installation/application Of Road Safety Facilities - Naval-caibiran Cross Country Rd - K1027+000 - K1031+530 Contract Location : Naval, Biliran (11.565233°, 124.404044°- 11.578701°, 124.441236°) Project Description/scope Of Work : Installation Of 181 Units Of Solar Street Lights Approved Budget For The Contract : P 29,398,224.41 Contract Duration : 130.00 C.d. Cost Of Bidding Documents : P 25,000.00 2. Procurement Id/contract Id : 25ia0105 Contract Name : Construction Of Access Roads Leading To Declared Tourism Destinations - Access Road Leading To Subing Subing Hill, Kawayan, Biliran Contract Location : Brgy. Balacson, Kawayan, Biliran 11.669727, 124.344403 - 11.671273, 124.343774 (location 1) 11.675592, 124.343897 - 11.676395, 124.343767 (location 2) Project Description/scope Of Work : Construction Of 0.746 Lane Kilometer Road, 0.23m Thick & 6.10m Width With Embankment, Drainage, And Slope Protection Structure Approved Budget For The Contract : P 19,598,031.50 Contract Duration : 160.00 Cd Cost Of Bidding Documents : P 25,000.00 3. Procurement Id/contract Id : 25ia0106 Contract Name : Construction Of Drainage, Barangay Calumpang, Naval, Biliran Contract Location : Brgy. Calumpang, Naval, Biliran Location 1 - (11.568507°, 124.412067° - 11.570055°, 124.41164°) Location 2 - (11.569489°, 124.411632° - 11.569495°, 124.41162°) Project Description/scope Of Work : Construction Of 616.70 Ln.m Open Drainage (lined Canal) W/ Metal Frames And Gratings Approved Budget For The Contract : P 4,948,200.18 Contract Duration : 85.00 C.d. Cost Of Bidding Documents : P 5,000.00 Page 2 Of 4 4. Procurement Id/contract Id : 25ia0107 Contract Name : Construction Of Seawall, Barangay Mabini, Naval, Biliran Contract Location : Brgy. Mabini, Naval, Biliran (11.564381°, 124.275058° - 11.564806°, 124.274625°) Project Description/scope Of Work : Construction Of 93.20 Ln.m. Seawall Structure With Reinforced Concrete Facing Approved Budget For The Contract : P 9,898,256.03 Contract Duration : 165.00 C.d. Cost Of Bidding Documents : P 10,000.00 5. Procurement Id/contract Id : 25ia0108 Contract Name : Construction Of Bagongbong Flood Control, Barangay Salangi, Almeria, Biliran Contract Location : Almeria, Biliran (124.394165°, 11.621246° - 124.394360°, 11.623738°) Project Description/scope Of Work : Construction Of 334.00 Ln.m. Flood Control Structure Approved Budget For The Contract : P 19,598,391.73 Contract Duration : 143.00 C.d. Cost Of Bidding Documents : P 25,000.00 6. Procurement Id/contract Id : 25ia0109 Contract Name : Construction Of Flood Control Structure, Barangay Casiawan, Cabucgayan, Biliran Contract Location : Cabucgayan, Biliran (124.573765°, 11.484283° - 124.575893°, 11.486335°) Project Description/scope Of Work : Construction Of 424.00 Ln.m. Flood Control Structure Approved Budget For The Contract : P 19,598,372.48 Contract Duration : 143.00 C.d. Cost Of Bidding Documents : P 25,000.00 7. Procurement Id/contract Id : 25ia0110 Contract Name : Construction Two-storey Office Building, Dpwh Biliran Deo, Bureau Of Equipment, 8th Res, Barangay Larrazabal, Naval, Biliran Contract Location : Brgy. Larrazabal, Naval, Biliran (11.583267, 124.409843 & 11.58306, 124.409215) Project Description/scope Of Work : Construction Of 2-storey Building Approved Budget For The Contract : P 48,998,346.17 Contract Duration : 250.00 C.d. Cost Of Bidding Documents : P 25,000.00 8. Procurement Id/contract Id : 25ia0111 Contract Name : Construction Of Multi-purpose Building, Barangay Matanggo, Almeria, Biliran Contract Location : Barangay Matanggo, Almeria, Biliran (11.647594, 124.124.368010) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,276.36 Contract Duration : 140.00 C.d. Cost Of Bidding Documents : P 5,000.00 9. Procurement Id/contract Id : 25ia0112 Contract Name : Construction Of Multi-purpose Building,barangay, P.i. Garcia, Naval, Biliran Contract Location : Brgy. P.i. Garcia, Naval, Biliran (11.563721, 124.395253) Project Description/scope Of Work : Construction Of 2-storey Building Approved Budget For The Contract : P 4,898,328.55 Contract Duration : 180.00 C.d. Cost Of Bidding Documents : P 5,000.00 Page 3 Of 4 10. Procurement Id/contract Id : 25ia0113 Contract Name : Construction (completion) Of Multi-purpose Building, Barangay Pulang Bato, Almeria, Biliran Contract Location : Barangay Pulang Bato, Almeria, Biliran (11.600953, 124.390656) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,276.06 Contract Duration : 140.00 C.d. Cost Of Bidding Documents : P 5,000.00 11. Procurement Id/contract Id : 25ia0114 Contract Name : Construction Of Multi-purpose Building, Barangay Union, Caibiran, Biliran Contract Location : Brgy.union, Caibiran, Biliran (11.56519194⁰, 124.55213936⁰) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,219.25 Contract Duration : 125.00 C.d. Cost Of Bidding Documents : P 5,000.00 12. Procurement Id/contract Id : 25ia0115 Contract Name : Construction (completion) Of Multi-purpose Building, Barangay Binohangan, Caibiran, Biliran Contract Location : Brgy. Binohangan, Caibiran, Biliran (11.596326˚, 124.570058˚) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 1,978,469.83 Contract Duration : 75.00 C.d. Cost Of Bidding Documents : P 5,000.00 13. Procurement Id/contract Id : 25ia0116 Contract Name : Completion Of Multi-purpose Building, Barangay Trabugan, Maripipi, Biliran Contract Location : Brgy. Trabugan, Maripipi, Biliran (11.779571˚, 124.299212˚) Project Description/scope Of Work : Completion Of 1-storey Building Approved Budget For The Contract : P 1,978,412.59 Contract Duration : 70.00 C.d. Cost Of Bidding Documents : P 5,000.00 Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of Small B & Medium A As Per Pcab Resolution No. 201, Series Of 2017, (b) Completion Of A Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc. Contractors/applicants Who Wish To Participate In The Biding Are Encouraged To Enroll With The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Building, Bonifacio Drive, Port Area Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From Dpwh, Biliran District Engineering Office, Naval, Biliran And Inspect The Bidding Documents At The Address Given Below From 8:00a.m. To 5:00 P.m. Page 4 Of 4 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of An Applicable Fee For The Bidding Documents In The Amount Stated Above. Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of The R.a. 9184 And Its Irr. Bidders Can Make Payments For The Purchase Of Bidding Documents At Any Dpwh Field Offices. The Schedule Of Key Procurement Activities For This Contract Is Shown Below: Activity Time Place Date Of Posting December 6, 2024 – December 26, 2024 Dpwh Web / Philgeps / Bulletin Board Issuance Of Bidding Documents December 6, 2024 – December 26, 2024 Bac Office, Biliran-deo, Naval, Biliran Pre-bid Conference December 13, 2024; 10:00 A.m. Bac Conference Room, Biliran-deo, Naval, Biliran Receipt By The Bac Of Bids December 26, 2024, 1:00 P.m. Bac Office, Biliran-deo, Naval, Biliran Opening Of Bids December 26, 2024; 1:00 P.m. Conference Room, Biliran-deo, Naval, Biliran 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That The Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. Pre-bid Conference And Opening Of Bids Will Be Held At The Bac Office, Dpwh-biliran District Engineering Office, Naval, Biliran Which Shall Be Open To All Interested Parties. Bidding For The Above Contract Shall Be Conducted “short Of Award” Pending Availability/ Receipt Of Fy-2025 Funds/saa. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_biliran For Electronic Submission On Or Before December 26, 2024 At 1:00 P.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On December 26, 2024 At 1:00 P.m. Immediately After The Deadline Of The Dropping Of Bids At Bac Conference Room, Biliran-deo, Naval, Biliran. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh-biliran District Engineering Office, Naval, Biliran Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of R.a. 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Head, Bac Secretariat Bac Office, Dpwh Biliran District Engineering Office Brgy. Calumpang, Naval, Biliran Province Telefax No.: (053) 500-9097 Email Add: Dpwh.bdeo@gmail.com Approved: Rosario B. Rosete Assistant District Engineer Bac Chairperson Noted: Irwin L. Antonio, Asean Eng. Oic-district Engineer encoded/printedbyrcpancito December 5, 2024

Details: Description Invitation To Bid December 5, 2024 1. The Dpwh–biliran District Engineering Office, Through Gaa Fy-2025, Intends To Apply The Sum Of The Approved Budget For The Contract (abc) Stated Below Being The Abc To Payments Under The Contracts Below. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening And Declared Non-complying/failed. 2. The Dpwh–biliran District Engineering Office, Through Its Bids And Awards Committee (bac) Now Invites Bids For The Hereunder Works Of The Following Contract/s: 1. Procurement Id/contract Id : 25ia0104 Contract Name : Installation/application Of Road Safety Facilities - Naval-caibiran Cross Country Rd - K1027+000 - K1031+530 Contract Location : Naval, Biliran (11.565233°, 124.404044°- 11.578701°, 124.441236°) Project Description/scope Of Work : Installation Of 181 Units Of Solar Street Lights Approved Budget For The Contract : P 29,398,224.41 Contract Duration : 130.00 C.d. Cost Of Bidding Documents : P 25,000.00 2. Procurement Id/contract Id : 25ia0105 Contract Name : Construction Of Access Roads Leading To Declared Tourism Destinations - Access Road Leading To Subing Subing Hill, Kawayan, Biliran Contract Location : Brgy. Balacson, Kawayan, Biliran 11.669727, 124.344403 - 11.671273, 124.343774 (location 1) 11.675592, 124.343897 - 11.676395, 124.343767 (location 2) Project Description/scope Of Work : Construction Of 0.746 Lane Kilometer Road, 0.23m Thick & 6.10m Width With Embankment, Drainage, And Slope Protection Structure Approved Budget For The Contract : P 19,598,031.50 Contract Duration : 160.00 Cd Cost Of Bidding Documents : P 25,000.00 3. Procurement Id/contract Id : 25ia0106 Contract Name : Construction Of Drainage, Barangay Calumpang, Naval, Biliran Contract Location : Brgy. Calumpang, Naval, Biliran Location 1 - (11.568507°, 124.412067° - 11.570055°, 124.41164°) Location 2 - (11.569489°, 124.411632° - 11.569495°, 124.41162°) Project Description/scope Of Work : Construction Of 616.70 Ln.m Open Drainage (lined Canal) W/ Metal Frames And Gratings Approved Budget For The Contract : P 4,948,200.18 Contract Duration : 85.00 C.d. Cost Of Bidding Documents : P 5,000.00 Page 2 Of 4 4. Procurement Id/contract Id : 25ia0107 Contract Name : Construction Of Seawall, Barangay Mabini, Naval, Biliran Contract Location : Brgy. Mabini, Naval, Biliran (11.564381°, 124.275058° - 11.564806°, 124.274625°) Project Description/scope Of Work : Construction Of 93.20 Ln.m. Seawall Structure With Reinforced Concrete Facing Approved Budget For The Contract : P 9,898,256.03 Contract Duration : 165.00 C.d. Cost Of Bidding Documents : P 10,000.00 5. Procurement Id/contract Id : 25ia0108 Contract Name : Construction Of Bagongbong Flood Control, Barangay Salangi, Almeria, Biliran Contract Location : Almeria, Biliran (124.394165°, 11.621246° - 124.394360°, 11.623738°) Project Description/scope Of Work : Construction Of 334.00 Ln.m. Flood Control Structure Approved Budget For The Contract : P 19,598,391.73 Contract Duration : 143.00 C.d. Cost Of Bidding Documents : P 25,000.00 6. Procurement Id/contract Id : 25ia0109 Contract Name : Construction Of Flood Control Structure, Barangay Casiawan, Cabucgayan, Biliran Contract Location : Cabucgayan, Biliran (124.573765°, 11.484283° - 124.575893°, 11.486335°) Project Description/scope Of Work : Construction Of 424.00 Ln.m. Flood Control Structure Approved Budget For The Contract : P 19,598,372.48 Contract Duration : 143.00 C.d. Cost Of Bidding Documents : P 25,000.00 7. Procurement Id/contract Id : 25ia0110 Contract Name : Construction Two-storey Office Building, Dpwh Biliran Deo, Bureau Of Equipment, 8th Res, Barangay Larrazabal, Naval, Biliran Contract Location : Brgy. Larrazabal, Naval, Biliran (11.583267, 124.409843 & 11.58306, 124.409215) Project Description/scope Of Work : Construction Of 2-storey Building Approved Budget For The Contract : P 48,998,346.17 Contract Duration : 250.00 C.d. Cost Of Bidding Documents : P 25,000.00 8. Procurement Id/contract Id : 25ia0111 Contract Name : Construction Of Multi-purpose Building, Barangay Matanggo, Almeria, Biliran Contract Location : Barangay Matanggo, Almeria, Biliran (11.647594, 124.124.368010) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,276.36 Contract Duration : 140.00 C.d. Cost Of Bidding Documents : P 5,000.00 9. Procurement Id/contract Id : 25ia0112 Contract Name : Construction Of Multi-purpose Building,barangay, P.i. Garcia, Naval, Biliran Contract Location : Brgy. P.i. Garcia, Naval, Biliran (11.563721, 124.395253) Project Description/scope Of Work : Construction Of 2-storey Building Approved Budget For The Contract : P 4,898,328.55 Contract Duration : 180.00 C.d. Cost Of Bidding Documents : P 5,000.00 Page 3 Of 4 10. Procurement Id/contract Id : 25ia0113 Contract Name : Construction (completion) Of Multi-purpose Building, Barangay Pulang Bato, Almeria, Biliran Contract Location : Barangay Pulang Bato, Almeria, Biliran (11.600953, 124.390656) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,276.06 Contract Duration : 140.00 C.d. Cost Of Bidding Documents : P 5,000.00 11. Procurement Id/contract Id : 25ia0114 Contract Name : Construction Of Multi-purpose Building, Barangay Union, Caibiran, Biliran Contract Location : Brgy.union, Caibiran, Biliran (11.56519194⁰, 124.55213936⁰) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 4,948,219.25 Contract Duration : 125.00 C.d. Cost Of Bidding Documents : P 5,000.00 12. Procurement Id/contract Id : 25ia0115 Contract Name : Construction (completion) Of Multi-purpose Building, Barangay Binohangan, Caibiran, Biliran Contract Location : Brgy. Binohangan, Caibiran, Biliran (11.596326˚, 124.570058˚) Project Description/scope Of Work : Construction Of 1-storey Building Approved Budget For The Contract : P 1,978,469.83 Contract Duration : 75.00 C.d. Cost Of Bidding Documents : P 5,000.00 13. Procurement Id/contract Id : 25ia0116 Contract Name : Completion Of Multi-purpose Building, Barangay Trabugan, Maripipi, Biliran Contract Location : Brgy. Trabugan, Maripipi, Biliran (11.779571˚, 124.299212˚) Project Description/scope Of Work : Completion Of 1-storey Building Approved Budget For The Contract : P 1,978,412.59 Contract Duration : 70.00 C.d. Cost Of Bidding Documents : P 5,000.00 Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of Small B & Medium A As Per Pcab Resolution No. 201, Series Of 2017, (b) Completion Of A Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc. Contractors/applicants Who Wish To Participate In The Biding Are Encouraged To Enroll With The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Building, Bonifacio Drive, Port Area Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From Dpwh, Biliran District Engineering Office, Naval, Biliran And Inspect The Bidding Documents At The Address Given Below From 8:00a.m. To 5:00 P.m. Page 4 Of 4 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of An Applicable Fee For The Bidding Documents In The Amount Stated Above. Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of The R.a. 9184 And Its Irr. Bidders Can Make Payments For The Purchase Of Bidding Documents At Any Dpwh Field Offices. The Schedule Of Key Procurement Activities For This Contract Is Shown Below: Activity Time Place Date Of Posting December 6, 2024 – December 26, 2024 Dpwh Web / Philgeps / Bulletin Board Issuance Of Bidding Documents December 6, 2024 – December 26, 2024 Bac Office, Biliran-deo, Naval, Biliran Pre-bid Conference December 13, 2024; 10:00 A.m. Bac Conference Room, Biliran-deo, Naval, Biliran Receipt By The Bac Of Bids December 26, 2024, 1:00 P.m. Bac Office, Biliran-deo, Naval, Biliran Opening Of Bids December 26, 2024; 1:00 P.m. Conference Room, Biliran-deo, Naval, Biliran 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That The Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. Pre-bid Conference And Opening Of Bids Will Be Held At The Bac Office, Dpwh-biliran District Engineering Office, Naval, Biliran Which Shall Be Open To All Interested Parties. Bidding For The Above Contract Shall Be Conducted “short Of Award” Pending Availability/ Receipt Of Fy-2025 Funds/saa. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_biliran For Electronic Submission On Or Before December 26, 2024 At 1:00 P.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On December 26, 2024 At 1:00 P.m. Immediately After The Deadline Of The Dropping Of Bids At Bac Conference Room, Biliran-deo, Naval, Biliran. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh-biliran District Engineering Office, Naval, Biliran Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of R.a. 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Head, Bac Secretariat Bac Office, Dpwh Biliran District Engineering Office Brgy. Calumpang, Naval, Biliran Province Telefax No.: (053) 500-9097 Email Add: Dpwh.bdeo@gmail.com Approved: Rosario B. Rosete Assistant District Engineer Bac Chairperson Noted: Irwin L. Antonio, Asean Eng. Oic-district Engineer encoded/printedbyrcpancito December 5, 2024