Waterproofing Tenders
Waterproofing Tenders
Zamboanga City State Polytechnic College Tender
Civil And Construction...+1Construction Material
Corrigendum : Closing Date Modified
Philippines
Details: Description The Zamboanga Peninsula Polytechnic State University Through Its Bids And Awards Committee (bac) Is Inviting Philgeps Registered Suppliers To Apply For Eligibility And To Submit Bids For The Items Listed Below: 1 Portland Cement, 40kg (710 Bags) 2 Coarse Sand (32 Cu.m.) 3 Gravel, ¾” Size (41 Cu.m.) 4 Fine Sand (18 Cu.m.) 5 Cement Water-proofing Compound, 1kg/bag (40 Bags) 6 Chb, 4” (4,365 Pcs.) 7 Rsb, 10mmø (585 Pcs.) 8 Rsb, 12mmø (190 Pcs.) 9 Rsb, 16mmø (180 Pcs.) 10 Dry Brickstone, Sorsogon (10.8 Sq.m.) 11 Concrete Neutralizer (10 Gals.) 12 Liquid Tile Primer (20 Gals.) 13 Patching Compound, 20kg (25 Bags) 14 Liquid Tile Top Coat, White (40 Gals.) 15 Baby Roller, Cloth (8 Pcs.) 16 Paint Roller, 6”, Cloth (8 Pcs.) 17 Paint Brush, 3” (8 Pcs.) 18 Waterproofing Paint, Gray (4 Gals.) 19 Pvc Sanitary Pipe, S1000, 4” (12 Pcs.) 20 Pvc Sanitary Pipe, S1000, 3” (5 Pcs.) 21 Pvc 90° Sanitary Elbow, 3” (8 Pcs.) 22 Wall Faucet Plain Bib, ½” X 6”, Stainless (7 Pcs.) 23 Wall Faucet Plain Bib, ½” X 4”, Stainless (6 Pcs.) 24 Wall Faucet Plain Bib, ½” X 2”, Stainless (18 Pcs.) 25 Stainless Floor Drain Main, 6” X 6” (13 Pcs.) 26 Stainless Floor Drain Main, 6” X 4” (2 Pcs.) 27 Pvc P-trap, S1000, 4”, Assembled (10 Pcs.) 28 Body Filler W/ Hardener (12 L) 29 Tee Reducer, 4” X 2” (20 Pcs.) 30 Pvc Elbow, 45°, 2” (10 Pcs.) 31 Pvc Tee, 4”, Sanitary (40 Pcs.) 32 Pvc Elbow, 90°, 4” (15 Pcs.) 33 Pvc Wye W/ Clean-out, 4”, 4” X 4” (10 Pcs.) 34 Ppr Pipes, Red Line, ½” (13 Pcs.) 35 Ppr Tee, ½” (40 Pcs.) 36 Ppr Elbow, ½” (50 Pcs.) 37 Solvent Cement, 400cc (2 Pcs.) 38 Water Closet W/ Trap, Flush Tank & Cover, White Porcelain (8 Sets) 39 Wall-mounted Urinal, White Porcelain, W/ Push Button Faucet Valve (7 Sets) 40 Surface Lavatories, Round & White, For Counters (7 Sets) 41 Cylindrical Knobset (4 Sets) 42 Sliding Barrel Flat Bolt, Stainless, 3” (8 Sets) 43 2-prong Universal Outlets (4 Sets) 44 Electrical Flexible Hose, 1/2” (60 M) 45 Electrical Tape, 16m, Big Size (4 Pcs.) 46 Junction Square Box W/ Cover (6 Pcs.) 47 Panel Board, 8 Branches (1 Set) 48 Utility Box (7 Pcs.) 49 Orbit Fan (2 Units) 50 Circuit Breaker, 30a (1 Pc.) 51 Circuit Breaker, 15a (2 Pcs.) 52 Led Downlight, White, 9w, 145mm X 145mm, 3 Colors (21 Pcs.) 53 Thhn Wire #12 (2 Boxes) 54 Thhn Wires #10 (1 Box) 55 2-gang Switch (2 Sets) 56 1-gang Switch (2 Sets) 57 4-gang Switch (1 Set) 58 Gi Tubular, 2” X 4” (20 Pcs.) 59 Stainless Zppsu Seal, 1.5m Ø (1 Set) 60 Fiber Cement Board, 3.5mm (40 Pcs.) 61 Double Metal Furring (145 Pcs.) 62 Cut-off Wheel Blade, 14” (4 Pcs.) 63 Angle Grinder Cutting Disc (20 Pcs.) 64 Mirror W/ Brown Aluminum Framing, 80cm H X 60cm W (1 Pc.) 65 Mirror W/ Brown Aluminum Framing, 80cm H X 200cm W (2 Pcs.) 66 Wall Angle, 0.4mm (35 Pcs.) 67 Filling Materials, No Boulders & Big Rocks (120 Cu.m.) 68 Door Bumper (4 Pcs.) 69 Stainless Toilet Signages, Male & Female (1 Pc.) 70 Stainless Toilet Signages, Male (1 Pc.) 71 Stainless Toilet Signages, Female (1 Pc.) 72 Stainless Toilet Signages, Pwd (1 Pc.) 73 Stainless Door Hinges, 3” X 3” X 2mm, Set Of 2 (8 Sets) 74 Stainless P-trap, For Lavatory (7 Sets) 75 Stainless Bidet, Chrome-plated, Spray (14 Sets) 76 Gi Welding Electrode (20 Kgs.) 77 Sanitary Pipes, S1000, 2” (12 Pcs.) 78 Louver-type Solid Panel Door, 1000 X 2100 X 40, Gloss Choco Brown (1 Set) 79 Louver-type Solid Panel Door, 700 X 2100 X 40, Gloss Choco Brown (1 Set) 80 Louver-type Solid Panel Door, 800 X 2100 X 40, Gloss Choco Brown (2 Sets) 81 Louver-type Solid Cafe Door, 500 X 1600 X 40, Gloss Choco Brown (7 Sets) 82 Door Jamb, Good Quality, 1m (1 Set) 83 Door Jamb, Good Quality, 0.7m (1 Set) 84 Door Jamb, Good Quality, 0.8m (2 Sets) 85 Door Jamb, Good Quality, 0.5m (7 Sets) 86 Stainless Flexible Hose, ½” X 12” (9 Pcs.) 87 Angle Valve, 2-way (8 Pcs.) 88 Angle Valve, Single (7 Pcs.) 89 Metal Single Robe Hook (12 Pcs.) 90 Stainless Steel Welding Electrode (5 Kgs.) 91 Non-slippery Porcelain Light Gray Tiles, 60” X 60” (197 Pcs.) 92 Glossy White Tiles, 30” X 60” (712 Pcs.) 93 Granite Slab, 60mm X 220mm (3 Pcs.) 94 Tile Adhesive, 25kg/bag (20 Bags) 95 Tile Grout, White, 2kg/bag (30 Bags) 96 Stainless Steel Tube, 2” Ø (12 Pcs.) 97 Stainless Steel Pipe Fitting, 90°, 2” Ø (12 Pcs.) 98 Pwd Stainless Grab Bar (3 Sets) 99 Awning-type Window W/ Analok Framing, 0.5m X 0.5m, Refer To Plan (8 Sets) 100 Awning-type Window W/ Analok Framing, 0.5m X 1.5m, Refer To Plan (4 Sets) 101 Common Wire Nails, 2”, 10kg/bag (2 Boxes) 102 Common Wire Nails, 3”, 10kg/bag (2 Boxes) 103 Common Wire Nails, 4”, 10kg/bag (3 Boxes) 104 Concrete Nails, 4”, 10kg/bag (1 Box) 105 Coco Lumber, 2” X 2” X 12’ (150 Pcs.) 106 Coco Lumber, 2” X 3” X 12’ (150 Pcs.) 107 Phenolic Board (20 Sheets) 108 Pvc Vertical Tank, 2000l (2 Pcs.) 109 Pvc Horizontal Tank, 1000l (1 Pc.) 110 Water Pump, 0.75hp (1 Set) 111 Bladder Tank, 20l (1 Set) 112 Pressure Gauge (1 Pc.) 113 Float Ball Valve (2 Pcs.) 114 Ppr Gate Valve, ½” (3 Pcs.) 115 Ppr Check Valve, ½” (4 Pcs.) 116 Double Float Suspension (3 Pcs.) 117 Ppr Pipe, ¾” Ø, Red Line (8 Pcs.) 118 Sanitary Coupling, 4” Ø (13 Pcs.) 119 Ppr Female Elbow, ½”, Metal Thread (45 Pcs.) 120 Ppr Coupling, ½” (25 Pcs.) 121 Ppr Ball Valve, ½” (2 Pcs.) 122 Ppr Ball Valve, ¾” (2 Pcs.) 123 Electric Impact Drill, Heavy-duty, Good Quality, 750w Min. (2 Units) 124 Angle Grinder, Heavy-duty, Good Quality, 710w Min. (2 Units) 125 Tie Wire #16 (50 Kgs.) 126 Glazing Putty (5 Gals.) 127 Flat Wall Enamel (10 Gals) 128 Enamel Quick-dry, White (10 Gals.) 129 Paint Thinner (5 Gals.) 130 Liquid Tile Tinting Color, Venetian Red, Full Tone (6 Pints) 131 Liquid Tile Tinting Color, Raw Sienna, Full Tone (6 Pints) 132 Liquid Tile Tinting Color, Hansa Yellow, Full Tone (6 Pints) 133 Liquid Tile Tinting Color, Bulletin Red, Full Tone (6 Pints) Note: For Details On Door & Window Dimensions & Specifications, Please Refer To The Pdmeo (project Development Management & Evaluation Office). ______________________________ Supplier’s Signature Over Printed Name The Schedule Of Bac Activities Is As Follows: 1. Pre-bid Conference - December 23, 2024, @ 10:00a.m. 2. Receipt And Opening Of Bids - January 6, 2025, @ 10:00a.m. 3. Bid Evaluation - January 7-14, 2025 4. Post-qualification - January 7-14, 2025 5. Issuance Of Notice Of Award - January 15, 2025 6. Contract Preparation & Signing - January 16, 2025 7. Issuance Of Notice To Proceed - January 16, 2025 The Criteria To Be Used For The Eligibility Check Of Prospective Bidders, Examination And Evaluation Of Bids, Post-qualification And All Matters To This Procurement Shall Be Under Republic Act No. 9184 (the Government Procurement Reform Act) And Its Implementing Rules And Regulations. Interested Bidders May Obtain Further Thank Important Notice To Bidders: 1. Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents Of Five Thousand Pesos (p 5,000.00). It May Also Be Downloaded From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Non-refundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 2. All Bidders Are Required To Post A Bid Security In The Form Of A Cash/bank Guarantee (2% Of Abc) Or Surety Bond (5% Of Abc) Or Bid Securing Declaration. 3. The Bidder Shall Prepare An Original Technical And Financial Proposal, Copy 1 And Copy 2. 4. State The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative In A Sealed Envelope. 5. Warranty Shall Be For Three (3) Months For Supplies And Materials. One (1) Year For Equipment From The Date Of Acceptance By The Procuring Agency. 6. All Erasures Must Be Initialed To Avoid Disqualifications. 7. Late Submission Of Bids Will Not Be Accepted. Approved By: (sgd.) Jocelyn P. Remoto Bac Chairperson The Zamboanga Peninsula Polytechnic State University Reserves The Right To Reject Any Or All Bids, Accept The Bid Most Advantageous To The Government, And Award The Contract By Lot.
Closing Date6 Jan 2025
Tender AmountPHP 1.9 Million (USD 32.7 K)
Department Of Public Works And Highways Tender
Civil And Construction...+1Building Construction
Corrigendum : Closing Date Modified
Philippines
Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 24b00131 (re-advertisement) : Construction/ Rehabilitation/ Improvement Of Facilities For Persons With Disabilities: (pwds) And Elderlies/ Senior Citizens - Including Gender-responsive Facilities - Region Ii 1. The Dpwh Regional Office Ii, Through The Ra 11975 (gaa Fy 2024) Intends To Apply The Sum Of ₱9,650,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 24b00131: Construction/ Rehabilitation/ Improvement Of Facilities For Persons With Disabilities: (pwds) And Elderlies/ Senior Citizens - Including Gender-responsive Facilities - Region Ii. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction/ Rehabilitation/ Improvement Of Facilities For Persons With Disabilities: (pwds) And Elderlies/ Senior Citizens - Including Gender-responsive Facilities - Region Ii Contract Id No. : 24b00131 Location : Brgy. Lullutan, Ilagan City, Isabela Brief Project Description : 2 Storey Senior Citizens Building (12.00m X 16.25m) Whole Building Earthworks, Plain And Reinforced Concrete Works, Finishing And Other Civil Works, Electrical Works, Plumbing Works, Electronics Works And Mechanical Works (1-7.2kw /3 Ton Cabinet Type Floor Mounted Airconditioner,1 Phase Power Supply With Minimum Cooling Capacity Of 25,000 Btu/hr, Inverter, Including Copper Tubing, Steel Bracket, Hardware And Accessories) Not Included In Finishing Works(second Floor Cr Modular Partition, Built-up Preformed Membrane At Second Floor Cr, Unglazed Tiles At Second Floor Including Wall Of Cr, Painting Works Of Interior Of Second Floor Wall And Ceiling, Railings Of Stairs(main Stair And Exit Stair), Electrical Works(second Floor Interior Lighting Fixtures), Mechanical Works (second Floor Exhaust Fan Fixture, And All Airconditioning Unit Except The Above Mentioned) Plumbing Works( Catch Basin And Drain Pipes Connecting Each Catch Basin) Scope Of Works : Other General Requirements • Permits And Clearances • Project Billboard / Signboard • Occupational Safety And Health Program • Mobilization / Demobilization Earthworks • Structure Excavation (common Soil) • Embankment (from Structure Excavation & Borrow) • Gravel Fill Plain And Reinforced Concrete Works • Structural Concrete, 3000 Psi, Class A, 28 Days • Reinforcing Steel (deformed) Grade (40 And 60) • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Ceiling • Modular Partition • Finishing Hardware • Aluminum Framed Glass Doors (sliding & Swing Type) • Aluminum Glass Windows, (sliding, Casement, Awning & Fixed) Type • Doors, (wood Panel) • Roll-up Door (steel) • Fabricated Metal Roofing Accessory, Gauge 26, 0.60 Mm, (ridge/hip Rolls • Prepainted Metal Sheets (rib Type, Long Span,0.6mm Thk) • Waterproofing Cement-base • Built-up And Preformed Membrane • Unglazed Tiles • Cement (floor & Plaster) Finish • Decorative Stones • Painting Works, (masonry/concrete & Steel) • Reflective Insulation • Chb Non-load Bearing (including Reinforcing Steel) (100 Mm & 150mm) • Metal Structure Accessories, (turnbuckle, Bolts And Rods, Sagrods, Cross Bracing & Steel Plates) • Structural Steel (trusses & Purlins) • Railing • Storm Drainage And Downspout • Sewer Line Works • Septic Vault (chb/ Concrete) • Sanitary/plumbing Fixtures • Cold Water Lines Electrical Works • Conduits, Boxes & Fittings (conduit Works/conduit Rough-in) • Electric Wire • Single Pole Wall Switch On One Switch Plate • Duplex (2 Single Pole Wall Switches On One Switch Plate) • Triplex (3 Single Pole Wall Switches On One Switch Plate) • Three (3) - Way Switch • Single Convenience Outlet/receptacle, Grounding Type (gt) • Duplex Convenience Outlets/receptacles (gt) • Panelboard With Main & Branch Breakers • Lighting Fixtures Mechanical Works • Exhaust Fan, (ceiling Cassette) • Air Conditioning System Approved Budget For The Contract (abc) : ₱9,650,000.00 Contract Duration : 120 Calendar Days Inclusive Of 8 Unworkable/rainy Days, 26 Sundays And Holidays 2. The Major Category Of Work For The Project Is Bicwoplc - Buildings: Construction-without Piles-low Rise-concrete Frame(1 To 5 Storey ). 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Small B For Buildings. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 09 - 30, 2025, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Ten Thousand Pesos Only (₱10,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On January 16, 2025, 10:00 Am At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before January 30, 2025 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On January 30, 2025, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: January 09-15, 2025 Conspicuous Place (procurement Bulletin Board): January 09-15, 2025
Closing Date30 Jan 2025
Tender AmountPHP 9.6 Million (USD 164.5 K)
Department Of Public Works And Highways Tender
Civil And Construction...+1Building Construction
Corrigendum : Closing Date Modified
Philippines
Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 24b00127 (re-advertisement) : Construction Of Two - Storey Building For Procurement Service: Department Of Budget And Management (ps-dbm) Regional Depot - Tuguegarao 1. The Dpwh Regional Office Ii, Through The 2024 Ps-dbm Revolving Fund Intends To Apply The Sum Of ₱64,525,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 24b00127: Construction Of Two - Storey Building For Procurement Service: Department Of Budget And Management (ps-dbm) Regional Depot - Tuguegarao. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Two - Storey Building For Procurement Service: Department Of Budget And Management (ps-dbm) Regional Depot - Tuguegarao Contract Id No. : 24b00127 Location : Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Brief Project Description : Ps-dbm Building, Generator Set With Generator Set House And Concrete Pavement, Building = 23.0 X 33.8 Meters Scope Of Works : Facilities For The Engineer • Provision (rental Basis), Operation And Maintenance Of Combined Field Office, Laboratory And Living Quarters Building For The Engineer • Provision Of Furniture /fixtures Equipment & Appliances For The Field Office Of The Engineer Other General Requirements • Permits And Clearances • Project Billboard/signboard (dpwh, Coa, Denr) • Occupational Safety And Health Program • Traffic Management • Mobilization/demobilization • Additional Geotechnical Investigation Earthworks • Trees (furnishing And Transplanting) • Clearing And Grubbing • Removal Of Trees • Structure Excavation • Embankment (from Structure Excavation And Borrow) • Gravel Fill Subbase And Base Preparation • Aggregate Subbase Course Surface Courses • Pccp, 0.15m Thick, 14-day Concrete Plain And Reinforced Concrete Works • Structural Concrete, (3000 & 4000) Psi, Class A, 28 Days • Lean Concrete • Reinforcing Steel Grade (40 & 60) • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Ceiling, Metal Frame, Gypsum Board • Aluminum Metal Cladding • Modular Partition • Louver Window • Flush Door • Aluminum Framed Glass Doors (swing Type) • Aluminum Glass Windows, (casement, Awning, Fixed) Type • Frames (jambs, Sills, Head, Transoms And Mullions) • Doors, (flush, Wood Panel) • Roll-up Doors • Waterproofing, Liquid • Built-up And Preformed Membrane • Canopy Drain With Strainer • Unglazed Tiles • Cement (floor, Plaster) Finish • Stucco Finish • Painting Works, (masonry/concrete, Steel) • Pvc Doors And Frames • Chb Non-load Bearing (including Reinforcing Steel), (100 & 150) Mm • Louver Block • Metal Structure Accessories • Metal Railing (steel) • Sanitary/plumbing Fixtures • Cold Water Lines • Sewer Line Works • Storm Drainage And Downspout Electrical Works • Rigid Steel Conduit • Rigid Polyvinyl Chloride Pipes (pvc/upvc) • Boxes/wire Gutter • Fittings And Accessories • Electric Wire • Single Pole Wall Switch On One Switch Plate • Duplex (2 Single Pole Wall Switches On One Switch Plate) • Triplex (3 Single Pole Wall Switches On One Switch Plate) • Three-way Switch • Single Convenience Outlet/receptacle, Grounding Type (gt) • Duplex Convenience Outlets/receptacles (gt) • Pop-up Type/floor Duplex Convenience Outlet/receptacle (gt) • Wires And Wiring Devices • Panelboard With Main & Branch Breakers • Pad Mounted Distribution Transformer (oisc) With Complete Accessories • Generator (single Or Three Phase - Standby) • Lighting Fixtures Electronic Works • Network Cabling • Cctv System • Network Video Recorder • Lcd, Led Monitor • Door Access And Card Reader System • Public Address System • System Management Amplifier • Remote Microphone • Ceiling Speaker • Wall Mount Speaker • Wires/cables • Fire Alarm System • Smoke Detector With Base • Heat Detector With Base • Fire Alarm Control Panel • Manual Pull Station Switch • Back-up Battery Pack Mechanical Works • Ventilating Equipment • Exhaust Fan (ceiling Cassette, Wall Mounted, Wall Mounted, Industrial Type) • Booster Pump With Control • Water Tank (stainless) • Fire Department Connections For Wet And Dry Type System • Air Conditioning System (vrf/vrv) • Service Elevator Approved Budget For The Contract (abc) : ₱64,525,000.00 Contract Duration : 243 Calendar Days Inclusive Of 16 Unworkable/rainy Days, 47 Sundays And Holidays 2. The Major Category Of Work For The Project Is Bicwoplc - Buildings: Construction-without Piles-low Rise-concrete Frame(1 To 5 Storey ). 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Medium A. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 09 - 30, 2025, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Fifty Thousand Pesos Only (₱50,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On January 16, 2025, 10:00 Am At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before January 30, 2025 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On January 30, 2025, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: January 09-15, 2025 Conspicuous Place (procurement Bulletin Board): January 09-15, 2025
Closing Date30 Jan 2025
Tender AmountPHP 64.5 Million (USD 1.1 Million)
Department Of Education Division Of El Salvador City Tender
Publishing and Printing
Philippines
Details: Description Company Name: Address: Tel No. / Fax No.: Please Quote Your Lowest Price For The Package Described Below, Subject To The Terms And Conditions Stated Below And Submit Your Quotation Duly Signed By Your Representative Not Later Than 10:00 A.m. Of January 28,2025 In The Return Envelope Attached Herewith Rosen P.pacuma Bac Chairperson Lot No. Item No. Items & Description Qty. Unit Price Quotation (to Be Filled Up By Bidders) 1 112 Paper Clip, Vinly/plastic Coated, 33mm 5 Box 126 Cartolina, Assorted Colors 20 Pack 129 Notepad, Stick-on, 50mm X 76mm 5 Pad 130 Notepad, Stick-on, 76mm X 100mm 5 Pad 135 Paper, Multipurpose A4 40 Ream 136 Paper, Multipurpose Legal 15 Ream 137 Pad Paper, Ruled 2 Pad 6 Sign Pen, Extra Fine Tip, Black 10 Piece 11 Sign Pen, Medium Tip, Blue 10 Piece 61 Glue, All-purpose 10 Bottle 68 Tape, Transparent, 24mm 10 Roll 80 Clip, Backfold, 50mm 20 Box 81 Correction Tape 10 Piece * Refer To Technical Specifications For Details Lot No. Item No. Items & Description Qty. Unit Price Quotation (to Be Filled Up By Bidders) 1 83 Data File Box 10 Piece 89 Envelope, Expanding, Plastic 10 Piece 90 Envelope, Mailing 1 Box 93 Fastener 10 Box 106 Marker, Permanent, Black 20 Piece 107 Marker, Permanent, Blue 20 Piece 9 Double Sided Tape, 2 Inches 20 Roll 12 Ballpen, Black 40 Piece 13 Ballpen, Blue 40 Piece 17 Sticker Paper, A4, Vinyl Matte Pearl, Waterproof, 20pcs/pack 10 Pack 18 Photo Sticker Paper, A4, 20pcs/pack 10 Pack 20 Photo Paper, A4 Size, Glossy, 20pcs/pack 10 Pack 27 Glue Stick, For Glue Gun, Small 20 Piece 31 Construction Paper, 20's, Assorted Color 30 Pack 32 Specialty Paper, A4, 180gsm, 10's 10 Pack 33 Vellum Board Paper, A4, 180gsm, 10's 50 Pack 35 Certificate Holder, A4 100 Piece 39 Laminating Film, 12", 250 Microns, 50m 2 Roll 40 Laminating Film, 125microns, A4 , 100's 5 Pack 44 Paper Fastener, Plastic, 6" Size, 50pcs/box 20 Box 98 Thumbtacks 20 Box 99 Push Pin, Assorted Color, 100s 20 Box 100 Ink, For Brother Printer, Genuine, Bt5000, Cyan 9 Bottle 101 Ink, For Brother Printer, Genuine, Bt5000, Magenta 9 Bottle 102 Ink, For Brother Printer, Genuine, Bt5000, Yellow 9 Bottle 103 Ink, For Brother Printer, Genuine, Bt-d60, Black 9 Bottle 104 Ink, For Epson, Genuine, 003, Black 9 Bottle 105 Ink, For Epson, Genuine, 003, Cyan 9 Bottle 106 Ink, For Epson, Genuine, 003, Magenta 9 Bottle 107 Ink, For Epson, Genuine, 003, Yellow 9 Bottle 108 Ink, Epson 664, Genuine, Black 9 Bottle 109 Ink, Epson 664, Genuine, Cyan 9 Bottle 110 Ink, Epson 664, Genuine, Yellow 9 Bottle 111 Ink, Epson 664, Genuine, Magenta 9 Bottle Total Abc: 85,395.43 * Refer To Technical Specifications For Details After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item(s) At Prices Note Above Printed Name/ Signature/ Date
Closing Date28 Jan 2025
Tender AmountPHP 85.3 K (USD 1.4 K)
City Government Of Lucena Tender
Healthcare and Medicine
Philippines
Details: Description Quantity Unit Articles 10 Pieces Pulse Oximeter, 4 Color Oled Display Oxygen Monitor Fingertip With 20 X Memory, Blood Oxygen Saturation Monitor (spo2), Alarm & Brightness Adjustable, Batteries & Lanyard (black) 2 Pieces Bp Apparatus Set, Aneroid Sphygmomanometer And Stethoscope, Sphygmomanometer, Luminous Gauge, Adult Inflation System Cotton Cuff And Zipper Case, And Dual Head Stethoscope With Raised Dtem, Soft Ear Tips, Id Name Tag, And Chill Free Chest Piece Rim 2 Pieces Infrared Thermometer, Display Screen Lcd Screen With 4-digit And Special Icons, Operating Environment: 10°c - 40°c, Max Relative Humidity: ≤85%, Storage Environment: -20°c - +55°c, Max Relative Humidity: ≤85%, Battery: 2x1.5v Aaa Batteries, Dimensions: 149 X 38 X 42 (mm), Weight: Approx 69 (w/o Batteries) 10 Pieces Penlight, Concentric Beam, Energy-efficient Led That Never Needs Replacing Compact And Lightweight, Tailpush Button For One-handed Operation Sturdy Clip Fastens Securely To Pocket Performance (based On Max Batteries), 20 Hours Run Time, 10 Meters Beam Distance, Battery Required: 2x Aaa Batteries 4 Pieces Cervical Collar, Adult, Plastc, Color: Blue & Yellow, Feature: Pre-formed Collar With Tracheotomy Opening For Extraction And Rehabilitation 4 Geared Height Adjustment Mechanism For Maximum Support Of Upper Cervical Spine X-ray, Mri, Ct Penetratable Polyethylene Soft Foam Lining For Easy Application And Comfort Large Tracheal Aperture Provides Access To Airway Management And Other Procedures. 4 Pieces Cervical Collar, Pedia, Plastc, Color: Blue & Yellow, Feature: Pre-formed Collar With Tracheotomy Opening For Extraction And Rehabilitation 4 Geared Height Adjustment Mechanism For Maximum Support Of Upper Cervical Spine X-ray, Mri, Ct Penetratable Polyethylene Soft Foam Lining For Easy Application And Comfort Large Tracheal Aperture Provides Access To Airway Management And Other Procedures. 30 Pieces Nasal Oxygen Cannula, Made From Non-toxi Pvc Compound 1.8 Meters Of Non-kinky Star Lumen Pvc Tubing, Nasal Prongs Made Of Soft Pvc, Sizes: Adult, Pedia, Infant, Neonate 30 Pieces Opsite, Product Name: Opsite Post-op, Size: 20cm X 10cm, 8in X 4in Absorbent, Waterproof And Bacteria Proof Film Dressing. 1 Box Steri-strip, Size: 1/4 X 4", 50pcs/box, Sterile Skin Closure Strips That Are Made Of A Porous, Non-woven Backing Coated With A Pressure-sensitive, Hypoallergenic Adhesive And Reinforced With Polyester Filaments For Added Strength. 1 Pack Glucometer Strips, Glucose Autocode, Auto-coding, Small Sample Size, Made In Taiwan, 50 Pcs Test Per Box 5 Pieces Malleable Splint, Standard Size: 3 X 12, Color: Blue/orange Aluminium Foam Formable Splint Sam Splint Rolled Reusable Can Be Used To Splint Every Bone In The Human Body, Extremely Moldable, And Soft Enough To Cut With Ordinary Household Scissors 2 Pieces Head Stabilizer, Durable And Practical, Top Sales Item, Head Fixation, Eva Material Red, 40 X 25 X 16cm (l X W X H) 100 Pieces Triangular Bandage, 34 X 34 X 54 Inches Triangular Made From Tetron Fabric Material 4 Pieces Rescue Full Body Harness, Avao Bod Fast Black, Black, 2 3 Pieces Water Gear Rescue Flotation Device, Water Gear Rescue Tube Throwable Flotation Device 4 Pieces Throwbag, 20 Meters 1 Piece Ascension Hand Ascender Left & Right *****end*****
Closing Date31 Jan 2025
Tender AmountPHP 277.8 K (USD 4.7 K)
City Government Of Lucena Tender
Healthcare and Medicine
Philippines
Details: Description Quantity Unit Articles 10 Pieces Pulse Oximeter, 4 Color Oled Display Oxygen Monitor Fingertip With 20 X Memory, Blood Oxygen Saturation Monitor (spo2), Alarm & Brightness Adjustable, Batteries & Lanyard (black) 2 Pieces Bp Apparatus Set, Aneroid Sphygmomanometer And Stethoscope, Sphygmomanometer, Luminous Gauge, Adult Inflation System Cotton Cuff And Zipper Case, And Dual Head Stethoscope With Raised Dtem, Soft Ear Tips, Id Name Tag, And Chill Free Chest Piece Rim 2 Pieces Infrared Thermometer, Display Screen Lcd Screen With 4-digit And Special Icons, Operating Environment: 10°c - 40°c, Max Relative Humidity: ≤85%, Storage Environment: -20°c - +55°c, Max Relative Humidity: ≤85%, Battery: 2x1.5v Aaa Batteries, Dimensions: 149 X 38 X 42 (mm), Weight: Approx 69 (w/o Batteries) 10 Pieces Penlight, Concentric Beam, Energy-efficient Led That Never Needs Replacing Compact And Lightweight, Tailpush Button For One-handed Operation Sturdy Clip Fastens Securely To Pocket Performance (based On Max Batteries), 20 Hours Run Time, 10 Meters Beam Distance, Battery Required: 2x Aaa Batteries 4 Pieces Cervical Collar, Adult, Plastc, Color: Blue & Yellow, Feature: Pre-formed Collar With Tracheotomy Opening For Extraction And Rehabilitation 4 Geared Height Adjustment Mechanism For Maximum Support Of Upper Cervical Spine X-ray, Mri, Ct Penetratable Polyethylene Soft Foam Lining For Easy Application And Comfort Large Tracheal Aperture Provides Access For Airway Management And Other Procedures. 4 Pieces Cervical Collar, Pedia, Plastc, Color: Blue & Yellow, Feature: Pre-formed Collar With Tracheotomy Opening For Extraction And Rehabilitation 4 Geared Height Adjustment Mechanism For Maximum Support Of Upper Cervical Spine X-ray, Mri, Ct Penetratable Polyethylene Soft Foam Lining For Easy Application And Comfort Large Tracheal Aperture Provides Access For Airway Management And Other Procedures. 30 Pieces Nasal Oxygen Cannula, Made From Non-toxi Pvc Compound 1.8 Meters Of Non-kink Star Lumen Pvc Tubing, Nasal Prongs Made Of Soft Pvc, Sizes: Adult, Pedia, Infant, Neonate 30 Pieces Opsite, Product Name: Opsite Post-op, Size: 20cm X 10cm, 8in X 4in Absorbent, Waterproof And Bacteria Proof Film Dressing. 1 Box Steri-strip, Size: 1/4 X 4", 50pcs/box, Sterile Skin Closure Strips That Are Made Of A Porous, Non-woven Backing Coated With A Pressure-sensitive, Hypoallergenic Adhesive And Reinforced With Polyester Filaments For Added Strength. 1 Pack Glucometer Strips, Glucose Autocode, Auto-coding, Small Sample Size, Made In Taiwan, 50 Pcs Test Per Box 5 Pieces Malleable Splint, Standard Size: 3 X 12, Color: Blue/orange Aluminium Foam Formable Splint Sam Splint Rolled Reusable Can Be Used To Splint Every Bone In The Human Body, Extremely Moldable, And Soft Enough To Cut With Ordinary Household Scissors 2 Pieces Head Stabilizer, Durable And Practical, Top Sales Item, Head Fixation, Eva Material Red, 40 X 25 X 16cm (l X W X H) 100 Pieces Triangular Bandage, 34 X 34 X 54 Inches Triangular Made From Tetron Fabric Material 4 Pieces Rescue Full Body Harness, Avao Bod Fast Black, Black, 2 3 Pieces Water Gear Rescue Flotation Device, Water Gear Rescue Tube Throwable Flotation Device 4 Pieces Throwbag, 20 Meters 1 Piece Ascension Hand Ascender Left & Right *****end*****
Closing Date12 Feb 2025
Tender AmountPHP 277.8 K (USD 4.7 K)
Dr Jose Fabella Memorial Hospital Tender
Civil And Construction...+2Civil Works Others, Construction Material
Corrigendum : Closing Date Modified
Philippines
Details: Description The Dr. Jose Fabella Memorial Hospital Hereby Invites Interested Suppliers To Submit Quotation For The Supply And Delivery Of: Particular Quantity Unit Cost Total Cost Construction Of Dr. Jose Fabella Monument Base, Transfer And Installation Of Dr. Jose Fabella Statue And Plaque To The New Djfmh Building 1 Lot ₱ 687,546.09 Architectural Works Pre-construction Mobilization / Demobilization And Preliminaries 1 Lot Removal Of Statue From Monument Base And Transfer Of Dr. Jose 1 Lot Fabella Statue And Plaque From Old Djmfh, Lope De Vega St. To New Djmfh, Tayuman St. Manila Excavation And Formworks 1 Lot Construction Of New Monument Base Cement, 40kls/bag 30 Bag Sand, In Sacks 3 Cu.m Gravel, In Sacks 4 Cu.m Rebars, 10mmø X 6m, Grade 33 15 Piece Rebars, 16mmø X 6m, Grade 33 22 Piece Gi Wire #16 10 Kilo Concrete Hollow Blocks, 10cm X 20cm X 40cm 150 Piece Granite Slab, 18mm Thick, Light Gray 3 Sq. M Granite Slab, 18mm Thick, Brown 7 Sq. M Ball Top Post Stainless Steel Stanchion With 1.00m Rope Chain, 900mm X 63mm Dia. 16 Piece Paver Brick, 200mm X 100mm X 50mm Thick 80 Piece Pebble Stones, 20-40mm, 10kg/bag 25 Bag Stone Sealer, 1l/can 3 Can Stone Adhesive, 1.3l/jar 4 Jar Miscellaneous 1 Lot Installation Of Statue And Plaque To New Base Installation Of Dr. Jose Fabella Statue And Plaque To The New 1 Lot Monument Base Painting Works Repainting Of Statue And Repolishing Of Plaques Including Surface Preparation, Final Coating, Covering And Or Protection Of Exterior Surfaces To Be Affected And Other Works Including Use Of Tools & Equipment And All Necessary Items To Complete The Works Repainting Of Dr. Jose Fabella Statue 1 Lot Repolishing Of Plaques 1 Lot Painting Of Flooring Adjacent To Monument Base 51 Sq.m Electrical Works Waterproof Led Flood Light, 20 Watts, 230 Volts, Single Phase, White 2 Piece Pvc Pipe, 1/2" 8 L.m 3.5mm Thhn Copper Wire (red) 1 Box 3.5mm Thhn Copper Wire (white) 1 Box 3.5mm Thhn Copper Wire (green) 1 Box Imc Pipe (with Accessories) 3/4" 8 Piece G.i. Square Pull Box (4" X 4") 2 Piece Imc Elbow (3/4") 3 Piece Miscellaneous 1 Lot Note: 1. Site Inspection Is Needed For Quotation Purpose 2. All Materials Needed For The 100% Completion Of Project Shall Be Provided By The Supplier Without Any Cost. Total ₱ 687,546.09 Page 2 Request For Quotation (construction Of Dr. Jose Fabella Statue Monument Base And Plaque) Quotation Must Be Submitted To The Bac Secretariat Office, New Dr. Jose Fabella Memorial Hospital, Tayuman St., Manila On Or Before January 20 , 2025 To Submit Together With Quotation The Following Documents: 1. Philgeps Registration Certificate. 2. Mayor’s Permit 3. Omnibus Sworn Statement 4. Latest Income Tax Return 5. Pcab License For Details, Please Contact The Bac Secretariat At Bacfabella@yahoo.com. The Djfmh Reserves The Right To Accept Or Reject Any Or All Quotations, To Waive Any Defects Found Therein And To Accept Such Quotations As May Be Considered Advantageous To The Government. The Djfmh-bac Assumes No Obligation To Compensate Or Indemnify The Bidders For Any Expenses Or Losses That May Be Incurred In The Preparation Of Quotations Nor Does It Guarantee That An Award Will Be Made. (sgd) Maria Lu D. Andal, M.d. Chair, Bids And Awards Committee (for Infrastructure / Goods Non-medical Consulting Services / Non-medical Equipment / Services)
Closing Date20 Jan 2025
Tender AmountPHP 687.5 K (USD 11.7 K)
Rizal Medical Center Tender
Furnitures and Fixtures
Philippines
Details: Description Request For Quotation Rfq No. 2025-044 The Rizal Medical Center (rizal Med) Through Its Special Bids And Awards Committee (sbac), Hereby Invites All Interested Suppliers Or Distributors Registered With The Philippine Government Electronic Procurement System (philgeps), To Submit Their Quotation On The Item Listed Below, Subject To The General Conditions Stated Herein, And Submit Not Later Than 27 January 2025. Name Of Project: Procurement Of Two (2) Units Of Patient Lift Transfer Chair Mode Of Procurement: Negotiated Procurement Sec. 53.9 – Small Value Procurement Approved Budget For The Contract: One-twenty Thousand Pesos (php120,000.00) Item No. Description Unit Qty Unit Cost (php) Total Abc (php) 1. Procurement Of Two (2) Units Of Patient Lift Transfer Chair Unit 2 60,000.00 120,000.00 Technical Specification: Function: Provides A Safe And Reliable Transfer Solution For Caregivers Assisting The Elderly And Disabled Material: Thickened Lacquered Steel Pipe (waterproof, Wear-resistant) Weight Supported: Up To 275 Lbs Width: (adjustable) At Least 22 To 29.5 Inches Height: (adjustable) At Least 30 To 45 Inches Seat Oxford Cloth Seat Accessories: Detachable Cushions I. General Requirements: 1. Original Signed Price Quotation; 2. Certified True Copy Of The Following: A) Philgeps Certificate; B) Mayor’s/business Permit; C) Valid License To Operate Issued By Philippines Food And Drug Administration; D) Certificate Of Product Registration/ Certificate Of Non-registrable/ Certificate Of Product Notification/ Certificate Of Medical Device Notification; E) Certificate Of Distributorship (manufacturer’s Authority) Or Sub-distributorship Certificate / Agreement From The Distributor; 3. Duly Notarized Omnibus Sworn Statement Together With Original Notarized Secretary’s Certificate Or Original Special Power Of Attorney 4. Warranty Certificate: One (1) Year Parts And Labor Under Normal Wear And Tear 5. Product Description/brochure. Documentary Requirements Must Be Submitted To The Sbac Secretariat Not Later Than The Deadline. Ii. General Conditions: • The Monthly Billing Statement With Complete Documentary Requirements Must Be Provided By The Service Provider A Week After The Applicable Month • All Quotations Shall Be Considered Fixed Price, And Not Subject To Price Escalation During Contract Implementation. • Supplier/contractor/ Service Provider Is Entitled To One (1) Quotation Only; Otherwise, All Quotations Made Shall Automatically Be Rejected. Iii. Terms Of Payment • Payment Shall Be Based On Actual Deliveries Made By The Supplier/contractor/ Service Provider. • The Terms Of Payment Shall Not Be Later Than Sixty (60) Days After Submission Of Sales Invoice And Complete Supporting Documents By The Supplier/contractor. • Pursuant To Circular Letter No. 2013-16 Of Department Of Budget And Management Dated December 23, 2013, The Supplier/contractor Is Encouraged To Open An Account With The Land Bank Of The Philippines (lbp), The Government Servicing Bank Of The Procuring Entity, To Facilitate Settlement Of Account Payables Due To The Supplier/contractor. All Charges Incurred For Payment Through Bank Transfer With Other Banks Shall Be For The Account Of The Supplier/contractor. Iv. Delivery Term • Delivery Term Shall Be Within Thirty (30) Calendar Days Upon Receipt Of Notice To Proceed. For Further Inquiries, You May Contact The Sbac Secretariat At Mobile No. (0917) 104 6556. The Quotation And Requirements Must Be Submitted/delivered To The Following Address: Jacquelyn M. Perez, Llb Head, Sbac Secretariat Rizal Medical Center Pasig Blvd., Pasig City 1600 Mobile No. (0917) 104 6556 The Rizal Med Reserves The Right To Reject Any Or All Quotations/bids, To Waive Any Minor Defects Therein, To Annul The Bidding Process, To Reject All Quotations/bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder(s), And To Accept Only The Offer That Is Most Advantageous To The Government. The Rizal Med Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Quotation/bid. Very Truly Yours, (sgd)ruth G. Valeriano, Md, Ffps, Fcnsp, Fpna Chairperson, Special Bids And Awards Committee
Closing Date27 Jan 2025
Tender AmountPHP 120 K (USD 2 K)
Municipality Of Jasaan , Misamis Oriental Tender
Others
Philippines
Details: Description Request For Quotations Date: February 13, 2025 Rfq Reference No.: 2025-rfq-024 Company / Business Name : _______________________________________________________________ Address : _______________________________________________________________ Business / Mayor's Permit : _______________________________________________________________ Tax Identification Number : _______________________________________________________________ Philgeps Registration No. (required): _______________________________________________________ The Local Government Unit Of Jasaan, Jasaan, Misamis Oriental, Through Its Bids And Awards Committee (bac), Intends To Procure Safety Equipment- Menro Through Section 53.9 Negotiated Procurement – Small Value Procurement Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. Please Submit Your Duly Signed Quotation Addressed To The Bids And Awards Committee (bac) Chairperson And To The Given Address Below, On Or Before 11:00 Am Of February 18, 2025, Subject To The Compliance With The Terms And Conditions Provided On This Request For Quotation (rfq): Allan A. Jumuad Bac Chairperson Office Of The Bids And Awards Committee, Ground Floor, New Municipal Hall Building, Pres. Quirino St., Upper Jasaan, Jasaan, Misamis Oriental, Mindanao, Philippines 9003 Interested Service Provider Shall Also Submit A Copy Of The Following Documents And Along With The Quotation On Or Before The Above Specified Deadline Of Submission Of Quotation: A. Mayor’s Permit B. Omnibus Sworn Statement And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. The Head Of The Procuring Entity (hope) Of The Local Government Unit Of Jasaan, Reserves The Right To Reject Any And All Quotations, Declare A Failure Of Procurement, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Any Clarification, You May Visit Us At The Bac Secretariat, Bac Office, Ground Floor, New Municipal Hall Building, Upper Jasaan, Jasaan, Misamis Oriental. By The Authority Of The Bids And Awards Committee: Date: February 13, 2025 Allan A. Jumuad Bac Chairperson Instructions Note: Failure To Follow These Instructions Will Disqualify Your Entire Quotation. 1. Do Not Alter The Contents Of This Form In Any Way. 2. The Use Of This Rfq Is Highly Encouraged To Minimize Errors Or Omissions Of The Required Mandatory Provisions. In Case Of Any Changes, Bidders Must Use Or Refer To The Latest Version Of The Rfq, Except When The Latest Version Of The Rfq Only Pertains To Deadline Extension. If Another Form Is Used Other Than The Latest Rfq, The Quotation Shall Contain All The Mandatory Requirements/provisions Including Manifestation On The Agreement With The Terms And Conditions Below. In Case A Prospective Supplier/service Provider Submits A Filled-out Rfq With A Supporting Document (i.e., A Price Quotation In A Different Format), Both Documents Shall Be Considered Unless There Will Be Discrepancies. In This Case, Provisions In The Rfq Shall Prevail. 3. All Technical Specifications Must Be Complied With. Failure To Comply With The Mandatory Requirements Shall Render The Quotation Ineligible/disqualified. 4. Quotations May Be Submitted In Person At Bac Secretariat, Bac Office. 5. Quotations, Including Documentary Requirements, Received After The Deadline Shall Not Be Accepted. For Quotations Submitted Via Electronic Mail, The Date And Time Of Receipt Indicated In The E-mail Shall Be Considered. Terms And Conditions A. Bidders Shall Provide Correct And Accurate Information Required In This Form. B. Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By You Or Any Of Your Duly Authorized Representative/s. C. Price Quotation/s Must Be Valid For A Period Of Forty-five (45) Calendar Days From The Deadline Of Submission. D. Price Quotation/s, To Be Denominated In Philippine Peso, Shall Include All Taxes, Duties, And/or Levies Payable. E. Quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. F. In Case Of Two Or More Bidders Are Determined To Have Submitted The Lowest Calculated Quotation/lowest Calculated And Responsive Quotation, The Head Of The Procuring Entity (hope) Of The Local Government Unit Of Jasaan Shall Adopt And Employ “draw Lots” As The Tie-breaking Method To Finally Determine The Single Winning Provider In Accordance With Gppb Circular 06-2005. G. Award Of Contract Shall Be Made To The Lowest Quotation Which Complies With The Technical Specifications, Requirements And Other Terms And Conditions Stated Herein. H. The Item/s Shall Be Delivered According To The Accepted Offer Of The Bidder. I. Item/s Delivered Shall Be Inspected On The Scheduled Date And Time Of The Lgu - Jasaan. The Delivery Of The Item/s Shall Be Acknowledged Upon The Delivery To Confirm The Compliance With The Technical Specifications. J. Payment Shall Be Made After Delivery And Upon The Submission Of The Required Supporting Documents, I.e., Order Slip And/or Billing Statement, By The Supplier, Contractor, Or Consultant. Our Government Servicing Bank, I.e., The Land Bank Of The Philippines, Shall Credit The Amount Due To The Identified Bank Account Of The Supplier, Contractor, Or Consultant Not Earlier Than Twenty-four (24) Hours, But Not Later Than Forty-eight (48) Hours, Upon Receipt Of Our Advice. Please Note That The Corresponding Bank Transfer Fee, If Any, Shall Be Chargeable To The Account Of The Supplier, Contractor, Or Consultant. K. Liquidated Damages Equivalent To One-tenth Of One Percent (0.1%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. The Head Of The Procuring Entity (hope) Of The Local Government Unit Of Jasaan May Terminate The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. L. The Procuring Entity May Cancel Or Terminate The Contract At Any Time In Accordance With The Grounds Provided Under Ra No. 9184 And Its 2016 Revised Irr. M. The Rfq, Purchase Order (po), And Other Related Documents For The Above-stated Procurement Projects Shall Be Deemed To Form Part Of The Contract. After Having Carefully Read And Accepted The Instructions And Terms And Conditions, I/we Submit Our Quotation/s For The Item/s As Follows: Procurement Reference No. : 2025-rfq-021 Project Name : Procurement Of Safety Equipment- Menro Approved Budget For The Contract (pesos) : 123,400.00 This Procurement Is For Various Training And Consultation Activities. Exact Dates And Number Of Participants Per Activity Will Be Confirmed Within Three (3) To Five (5) Calendar Days Before The Activity. Note: Non-compliance With The Minimum Required Specifications Shall Be Rejected. Item No. Technical Specifications Quantity Unit Of Statement Of Compliance Issue (“comply” / “not Comply”) 1 Cctv (dahua Technology Complete 4 Units ________________________ Package) Dahua Wiz Hdcvi 4 Channel Kit W/ Audio Night Version (2.0mp) Waterproof Monitor Screen W/ 2tb Hdd 2 Flashlight 4 Pcs ________________________ (firefly Led Usb Charging Port Fel556) 3 Radio Walkie Takie 2 Units ________________________ (motorola X8 10km High Power Long Range) 4 Rubber Boots (size 8;9) 4 Pairs ________________________ 5 Field Bucket Hat 4 Pcs ________________________ Financial Offer: Terms Of Payment Payments Shall Be Made Through Land Bank’s Lddap-ada/bank Transfer Facility, Within Thirty (30) Days After Receipt Of Billing. In Case Of Accounts Maintained In Other Bank, Bank Transfer Fees Shall Be Chargeable Against The Creditor’s Account. Payment Details Banking Institution : ________________________________________________ Account Number : ________________________________________________ Account Name (should Be The Exact Account Name As Registered In The Bank) : ________________________________________________ Bank Branch : ________________________________________________ Note: Please Quote Your Best Offer For The Item/s Below. Please Do Not Leave Any Blank Items. Indicate “0” If Item Being Offered Is For Free. Procurement Reference No. : 2025-rfq-021 Project Name : Procurement Of Safety Equipment- Menro Approved Budget For The Contract (pesos) : 123,400.00 Item No. Technical Specification Quantity Offered Price Total Offered / Unit Per Unit Per Item 1 Cctv (dahua Technology Complete 4 Units ________________________ Package) Dahua Wiz Hdcvi 4 Channel Kit W/ Audio Night Version (2.0mp) Waterproof Monitor Screen W/ 2tb Hdd 2 Flashlight 4 Pcs ________________________ (firefly Led Usb Charging Port Fel556) 3 Radio Walkie Takie 2 Units ________________________ (motorola X8 10km High Power Long Range) 4 Rubber Boots (size 8;9) 4 Pairs ________________________ 5 Field Bucket Hat 4 Pcs ________________________ Approved Budget Total Offered Quotation: In Words _____________________________ For The Contract ______________________________________________________________________ (abc): P 123,400.00 _______________________________________________________________________ In Figures (pesos): ______________________________ _________________________________________ Signature Over Printed Name _________________________________________ Position/designation _________________________________________ Office Telephone/fax/mobile Nos. _________________________________________ Email Address/es
Closing Date18 Feb 2025
Tender AmountPHP 123.4 K (USD 2.1 K)
The city of Brandýs nad Orlicí Tender
Civil And Construction...+1Others
Czech Republic
Details: The subject of the public contract is to ensure the implementation of construction modifications to the object, including: - Demolition of the concrete cover plate and the existing brick wall - Repair of the foundation of the wall in damaged areas consisting of demolition and concreting - Penetration and installation of waterproofing on the foundation - Construction of a solid brick wall - Installation of thick-walled PVC drain pipes, diameter 63 mm - Installation of new cover plates
Closing Date22 Jan 2025
Tender AmountCZK 614 K (USD 25 K)
971-980 of 1094 archived Tenders