Waterproofing Tenders

Details: Description The Zamboanga Peninsula Polytechnic State University Through Its Bids And Awards Committee (bac) Is Inviting Philgeps Registered Suppliers To Apply For Eligibility And To Submit Bids For The Items Listed Below: 1 Portland Cement, 40kg (710 Bags) 2 Coarse Sand (32 Cu.m.) 3 Gravel, ¾” Size (41 Cu.m.) 4 Fine Sand (18 Cu.m.) 5 Cement Water-proofing Compound, 1kg/bag (40 Bags) 6 Chb, 4” (4,365 Pcs.) 7 Rsb, 10mmø (585 Pcs.) 8 Rsb, 12mmø (190 Pcs.) 9 Rsb, 16mmø (180 Pcs.) 10 Dry Brickstone, Sorsogon (10.8 Sq.m.) 11 Concrete Neutralizer (10 Gals.) 12 Liquid Tile Primer (20 Gals.) 13 Patching Compound, 20kg (25 Bags) 14 Liquid Tile Top Coat, White (40 Gals.) 15 Baby Roller, Cloth (8 Pcs.) 16 Paint Roller, 6”, Cloth (8 Pcs.) 17 Paint Brush, 3” (8 Pcs.) 18 Waterproofing Paint, Gray (4 Gals.) 19 Pvc Sanitary Pipe, S1000, 4” (12 Pcs.) 20 Pvc Sanitary Pipe, S1000, 3” (5 Pcs.) 21 Pvc 90° Sanitary Elbow, 3” (8 Pcs.) 22 Wall Faucet Plain Bib, ½” X 6”, Stainless (7 Pcs.) 23 Wall Faucet Plain Bib, ½” X 4”, Stainless (6 Pcs.) 24 Wall Faucet Plain Bib, ½” X 2”, Stainless (18 Pcs.) 25 Stainless Floor Drain Main, 6” X 6” (13 Pcs.) 26 Stainless Floor Drain Main, 6” X 4” (2 Pcs.) 27 Pvc P-trap, S1000, 4”, Assembled (10 Pcs.) 28 Body Filler W/ Hardener (12 L) 29 Tee Reducer, 4” X 2” (20 Pcs.) 30 Pvc Elbow, 45°, 2” (10 Pcs.) 31 Pvc Tee, 4”, Sanitary (40 Pcs.) 32 Pvc Elbow, 90°, 4” (15 Pcs.) 33 Pvc Wye W/ Clean-out, 4”, 4” X 4” (10 Pcs.) 34 Ppr Pipes, Red Line, ½” (13 Pcs.) 35 Ppr Tee, ½” (40 Pcs.) 36 Ppr Elbow, ½” (50 Pcs.) 37 Solvent Cement, 400cc (2 Pcs.) 38 Water Closet W/ Trap, Flush Tank & Cover, White Porcelain (8 Sets) 39 Wall-mounted Urinal, White Porcelain, W/ Push Button Faucet Valve (7 Sets) 40 Surface Lavatories, Round & White, For Counters (7 Sets) 41 Cylindrical Knobset (4 Sets) 42 Sliding Barrel Flat Bolt, Stainless, 3” (8 Sets) 43 2-prong Universal Outlets (4 Sets) 44 Electrical Flexible Hose, 1/2” (60 M) 45 Electrical Tape, 16m, Big Size (4 Pcs.) 46 Junction Square Box W/ Cover (6 Pcs.) 47 Panel Board, 8 Branches (1 Set) 48 Utility Box (7 Pcs.) 49 Orbit Fan (2 Units) 50 Circuit Breaker, 30a (1 Pc.) 51 Circuit Breaker, 15a (2 Pcs.) 52 Led Downlight, White, 9w, 145mm X 145mm, 3 Colors (21 Pcs.) 53 Thhn Wire #12 (2 Boxes) 54 Thhn Wires #10 (1 Box) 55 2-gang Switch (2 Sets) 56 1-gang Switch (2 Sets) 57 4-gang Switch (1 Set) 58 Gi Tubular, 2” X 4” (20 Pcs.) 59 Stainless Zppsu Seal, 1.5m Ø (1 Set) 60 Fiber Cement Board, 3.5mm (40 Pcs.) 61 Double Metal Furring (145 Pcs.) 62 Cut-off Wheel Blade, 14” (4 Pcs.) 63 Angle Grinder Cutting Disc (20 Pcs.) 64 Mirror W/ Brown Aluminum Framing, 80cm H X 60cm W (1 Pc.) 65 Mirror W/ Brown Aluminum Framing, 80cm H X 200cm W (2 Pcs.) 66 Wall Angle, 0.4mm (35 Pcs.) 67 Filling Materials, No Boulders & Big Rocks (120 Cu.m.) 68 Door Bumper (4 Pcs.) 69 Stainless Toilet Signages, Male & Female (1 Pc.) 70 Stainless Toilet Signages, Male (1 Pc.) 71 Stainless Toilet Signages, Female (1 Pc.) 72 Stainless Toilet Signages, Pwd (1 Pc.) 73 Stainless Door Hinges, 3” X 3” X 2mm, Set Of 2 (8 Sets) 74 Stainless P-trap, For Lavatory (7 Sets) 75 Stainless Bidet, Chrome-plated, Spray (14 Sets) 76 Gi Welding Electrode (20 Kgs.) 77 Sanitary Pipes, S1000, 2” (12 Pcs.) 78 Louver-type Solid Panel Door, 1000 X 2100 X 40, Gloss Choco Brown (1 Set) 79 Louver-type Solid Panel Door, 700 X 2100 X 40, Gloss Choco Brown (1 Set) 80 Louver-type Solid Panel Door, 800 X 2100 X 40, Gloss Choco Brown (2 Sets) 81 Louver-type Solid Cafe Door, 500 X 1600 X 40, Gloss Choco Brown (7 Sets) 82 Door Jamb, Good Quality, 1m (1 Set) 83 Door Jamb, Good Quality, 0.7m (1 Set) 84 Door Jamb, Good Quality, 0.8m (2 Sets) 85 Door Jamb, Good Quality, 0.5m (7 Sets) 86 Stainless Flexible Hose, ½” X 12” (9 Pcs.) 87 Angle Valve, 2-way (8 Pcs.) 88 Angle Valve, Single (7 Pcs.) 89 Metal Single Robe Hook (12 Pcs.) 90 Stainless Steel Welding Electrode (5 Kgs.) 91 Non-slippery Porcelain Light Gray Tiles, 60” X 60” (197 Pcs.) 92 Glossy White Tiles, 30” X 60” (712 Pcs.) 93 Granite Slab, 60mm X 220mm (3 Pcs.) 94 Tile Adhesive, 25kg/bag (20 Bags) 95 Tile Grout, White, 2kg/bag (30 Bags) 96 Stainless Steel Tube, 2” Ø (12 Pcs.) 97 Stainless Steel Pipe Fitting, 90°, 2” Ø (12 Pcs.) 98 Pwd Stainless Grab Bar (3 Sets) 99 Awning-type Window W/ Analok Framing, 0.5m X 0.5m, Refer To Plan (8 Sets) 100 Awning-type Window W/ Analok Framing, 0.5m X 1.5m, Refer To Plan (4 Sets) 101 Common Wire Nails, 2”, 10kg/bag (2 Boxes) 102 Common Wire Nails, 3”, 10kg/bag (2 Boxes) 103 Common Wire Nails, 4”, 10kg/bag (3 Boxes) 104 Concrete Nails, 4”, 10kg/bag (1 Box) 105 Coco Lumber, 2” X 2” X 12’ (150 Pcs.) 106 Coco Lumber, 2” X 3” X 12’ (150 Pcs.) 107 Phenolic Board (20 Sheets) 108 Pvc Vertical Tank, 2000l (2 Pcs.) 109 Pvc Horizontal Tank, 1000l (1 Pc.) 110 Water Pump, 0.75hp (1 Set) 111 Bladder Tank, 20l (1 Set) 112 Pressure Gauge (1 Pc.) 113 Float Ball Valve (2 Pcs.) 114 Ppr Gate Valve, ½” (3 Pcs.) 115 Ppr Check Valve, ½” (4 Pcs.) 116 Double Float Suspension (3 Pcs.) 117 Ppr Pipe, ¾” Ø, Red Line (8 Pcs.) 118 Sanitary Coupling, 4” Ø (13 Pcs.) 119 Ppr Female Elbow, ½”, Metal Thread (45 Pcs.) 120 Ppr Coupling, ½” (25 Pcs.) 121 Ppr Ball Valve, ½” (2 Pcs.) 122 Ppr Ball Valve, ¾” (2 Pcs.) 123 Electric Impact Drill, Heavy-duty, Good Quality, 750w Min. (2 Units) 124 Angle Grinder, Heavy-duty, Good Quality, 710w Min. (2 Units) 125 Tie Wire #16 (50 Kgs.) 126 Glazing Putty (5 Gals.) 127 Flat Wall Enamel (10 Gals) 128 Enamel Quick-dry, White (10 Gals.) 129 Paint Thinner (5 Gals.) 130 Liquid Tile Tinting Color, Venetian Red, Full Tone (6 Pints) 131 Liquid Tile Tinting Color, Raw Sienna, Full Tone (6 Pints) 132 Liquid Tile Tinting Color, Hansa Yellow, Full Tone (6 Pints) 133 Liquid Tile Tinting Color, Bulletin Red, Full Tone (6 Pints) Note: For Details On Door & Window Dimensions & Specifications, Please Refer To The Pdmeo (project Development Management & Evaluation Office). ______________________________ Supplier’s Signature Over Printed Name The Schedule Of Bac Activities Is As Follows: 1. Pre-bid Conference - December 23, 2024, @ 10:00a.m. 2. Receipt And Opening Of Bids - January 6, 2025, @ 10:00a.m. 3. Bid Evaluation - January 7-14, 2025 4. Post-qualification - January 7-14, 2025 5. Issuance Of Notice Of Award - January 15, 2025 6. Contract Preparation & Signing - January 16, 2025 7. Issuance Of Notice To Proceed - January 16, 2025 The Criteria To Be Used For The Eligibility Check Of Prospective Bidders, Examination And Evaluation Of Bids, Post-qualification And All Matters To This Procurement Shall Be Under Republic Act No. 9184 (the Government Procurement Reform Act) And Its Implementing Rules And Regulations. Interested Bidders May Obtain Further Thank Important Notice To Bidders: 1. Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents Of Five Thousand Pesos (p 5,000.00). It May Also Be Downloaded From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Non-refundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 2. All Bidders Are Required To Post A Bid Security In The Form Of A Cash/bank Guarantee (2% Of Abc) Or Surety Bond (5% Of Abc) Or Bid Securing Declaration. 3. The Bidder Shall Prepare An Original Technical And Financial Proposal, Copy 1 And Copy 2. 4. State The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative In A Sealed Envelope. 5. Warranty Shall Be For Three (3) Months For Supplies And Materials. One (1) Year For Equipment From The Date Of Acceptance By The Procuring Agency. 6. All Erasures Must Be Initialed To Avoid Disqualifications. 7. Late Submission Of Bids Will Not Be Accepted. Approved By: (sgd.) Jocelyn P. Remoto Bac Chairperson The Zamboanga Peninsula Polytechnic State University Reserves The Right To Reject Any Or All Bids, Accept The Bid Most Advantageous To The Government, And Award The Contract By Lot.

Details: Description Company Name: Address: Tel No. / Fax No.: Please Quote Your Lowest Price For The Package Described Below, Subject To The Terms And Conditions Stated Below And Submit Your Quotation Duly Signed By Your Representative Not Later Than 10:00 A.m. Of January 28,2025 In The Return Envelope Attached Herewith Rosen P.pacuma Bac Chairperson Lot No. Item No. Items & Description Qty. Unit Price Quotation (to Be Filled Up By Bidders) 1 112 Paper Clip, Vinly/plastic Coated, 33mm 5 Box 126 Cartolina, Assorted Colors 20 Pack 129 Notepad, Stick-on, 50mm X 76mm 5 Pad 130 Notepad, Stick-on, 76mm X 100mm 5 Pad 135 Paper, Multipurpose A4 40 Ream 136 Paper, Multipurpose Legal 15 Ream 137 Pad Paper, Ruled 2 Pad 6 Sign Pen, Extra Fine Tip, Black 10 Piece 11 Sign Pen, Medium Tip, Blue 10 Piece 61 Glue, All-purpose 10 Bottle 68 Tape, Transparent, 24mm 10 Roll 80 Clip, Backfold, 50mm 20 Box 81 Correction Tape 10 Piece * Refer To Technical Specifications For Details Lot No. Item No. Items & Description Qty. Unit Price Quotation (to Be Filled Up By Bidders) 1 83 Data File Box 10 Piece 89 Envelope, Expanding, Plastic 10 Piece 90 Envelope, Mailing 1 Box 93 Fastener 10 Box 106 Marker, Permanent, Black 20 Piece 107 Marker, Permanent, Blue 20 Piece 9 Double Sided Tape, 2 Inches 20 Roll 12 Ballpen, Black 40 Piece 13 Ballpen, Blue 40 Piece 17 Sticker Paper, A4, Vinyl Matte Pearl, Waterproof, 20pcs/pack 10 Pack 18 Photo Sticker Paper, A4, 20pcs/pack 10 Pack 20 Photo Paper, A4 Size, Glossy, 20pcs/pack 10 Pack 27 Glue Stick, For Glue Gun, Small 20 Piece 31 Construction Paper, 20's, Assorted Color 30 Pack 32 Specialty Paper, A4, 180gsm, 10's 10 Pack 33 Vellum Board Paper, A4, 180gsm, 10's 50 Pack 35 Certificate Holder, A4 100 Piece 39 Laminating Film, 12", 250 Microns, 50m 2 Roll 40 Laminating Film, 125microns, A4 , 100's 5 Pack 44 Paper Fastener, Plastic, 6" Size, 50pcs/box 20 Box 98 Thumbtacks 20 Box 99 Push Pin, Assorted Color, 100s 20 Box 100 Ink, For Brother Printer, Genuine, Bt5000, Cyan 9 Bottle 101 Ink, For Brother Printer, Genuine, Bt5000, Magenta 9 Bottle 102 Ink, For Brother Printer, Genuine, Bt5000, Yellow 9 Bottle 103 Ink, For Brother Printer, Genuine, Bt-d60, Black 9 Bottle 104 Ink, For Epson, Genuine, 003, Black 9 Bottle 105 Ink, For Epson, Genuine, 003, Cyan 9 Bottle 106 Ink, For Epson, Genuine, 003, Magenta 9 Bottle 107 Ink, For Epson, Genuine, 003, Yellow 9 Bottle 108 Ink, Epson 664, Genuine, Black 9 Bottle 109 Ink, Epson 664, Genuine, Cyan 9 Bottle 110 Ink, Epson 664, Genuine, Yellow 9 Bottle 111 Ink, Epson 664, Genuine, Magenta 9 Bottle Total Abc: 85,395.43 * Refer To Technical Specifications For Details After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item(s) At Prices Note Above Printed Name/ Signature/ Date

Details: Description Quantity Unit Articles 10 Pieces Pulse Oximeter, 4 Color Oled Display Oxygen Monitor Fingertip With 20 X Memory, Blood Oxygen Saturation Monitor (spo2), Alarm & Brightness Adjustable, Batteries & Lanyard (black) 2 Pieces Bp Apparatus Set, Aneroid Sphygmomanometer And Stethoscope, Sphygmomanometer, Luminous Gauge, Adult Inflation System Cotton Cuff And Zipper Case, And Dual Head Stethoscope With Raised Dtem, Soft Ear Tips, Id Name Tag, And Chill Free Chest Piece Rim 2 Pieces Infrared Thermometer, Display Screen Lcd Screen With 4-digit And Special Icons, Operating Environment: 10°c - 40°c, Max Relative Humidity: ≤85%, Storage Environment: -20°c - +55°c, Max Relative Humidity: ≤85%, Battery: 2x1.5v Aaa Batteries, Dimensions: 149 X 38 X 42 (mm), Weight: Approx 69 (w/o Batteries) 10 Pieces Penlight, Concentric Beam, Energy-efficient Led That Never Needs Replacing Compact And Lightweight, Tailpush Button For One-handed Operation Sturdy Clip Fastens Securely To Pocket Performance (based On Max Batteries), 20 Hours Run Time, 10 Meters Beam Distance, Battery Required: 2x Aaa Batteries 4 Pieces Cervical Collar, Adult, Plastc, Color: Blue & Yellow, Feature: Pre-formed Collar With Tracheotomy Opening For Extraction And Rehabilitation 4 Geared Height Adjustment Mechanism For Maximum Support Of Upper Cervical Spine X-ray, Mri, Ct Penetratable Polyethylene Soft Foam Lining For Easy Application And Comfort Large Tracheal Aperture Provides Access To Airway Management And Other Procedures. 4 Pieces Cervical Collar, Pedia, Plastc, Color: Blue & Yellow, Feature: Pre-formed Collar With Tracheotomy Opening For Extraction And Rehabilitation 4 Geared Height Adjustment Mechanism For Maximum Support Of Upper Cervical Spine X-ray, Mri, Ct Penetratable Polyethylene Soft Foam Lining For Easy Application And Comfort Large Tracheal Aperture Provides Access To Airway Management And Other Procedures. 30 Pieces Nasal Oxygen Cannula, Made From Non-toxi Pvc Compound 1.8 Meters Of Non-kinky Star Lumen Pvc Tubing, Nasal Prongs Made Of Soft Pvc, Sizes: Adult, Pedia, Infant, Neonate 30 Pieces Opsite, Product Name: Opsite Post-op, Size: 20cm X 10cm, 8in X 4in Absorbent, Waterproof And Bacteria Proof Film Dressing. 1 Box Steri-strip, Size: 1/4 X 4", 50pcs/box, Sterile Skin Closure Strips That Are Made Of A Porous, Non-woven Backing Coated With A Pressure-sensitive, Hypoallergenic Adhesive And Reinforced With Polyester Filaments For Added Strength. 1 Pack Glucometer Strips, Glucose Autocode, Auto-coding, Small Sample Size, Made In Taiwan, 50 Pcs Test Per Box 5 Pieces Malleable Splint, Standard Size: 3 X 12, Color: Blue/orange Aluminium Foam Formable Splint Sam Splint Rolled Reusable Can Be Used To Splint Every Bone In The Human Body, Extremely Moldable, And Soft Enough To Cut With Ordinary Household Scissors 2 Pieces Head Stabilizer, Durable And Practical, Top Sales Item, Head Fixation, Eva Material Red, 40 X 25 X 16cm (l X W X H) 100 Pieces Triangular Bandage, 34 X 34 X 54 Inches Triangular Made From Tetron Fabric Material 4 Pieces Rescue Full Body Harness, Avao Bod Fast Black, Black, 2 3 Pieces Water Gear Rescue Flotation Device, Water Gear Rescue Tube Throwable Flotation Device 4 Pieces Throwbag, 20 Meters 1 Piece Ascension Hand Ascender Left & Right *****end*****

Details: Description Request For Quotation Rfq No. 2025-044 The Rizal Medical Center (rizal Med) Through Its Special Bids And Awards Committee (sbac), Hereby Invites All Interested Suppliers Or Distributors Registered With The Philippine Government Electronic Procurement System (philgeps), To Submit Their Quotation On The Item Listed Below, Subject To The General Conditions Stated Herein, And Submit Not Later Than 27 January 2025. Name Of Project: Procurement Of Two (2) Units Of Patient Lift Transfer Chair Mode Of Procurement: Negotiated Procurement Sec. 53.9 – Small Value Procurement Approved Budget For The Contract: One-twenty Thousand Pesos (php120,000.00) Item No. Description Unit Qty Unit Cost (php) Total Abc (php) 1. Procurement Of Two (2) Units Of Patient Lift Transfer Chair Unit 2 60,000.00 120,000.00 Technical Specification: Function: Provides A Safe And Reliable Transfer Solution For Caregivers Assisting The Elderly And Disabled Material: Thickened Lacquered Steel Pipe (waterproof, Wear-resistant) Weight Supported: Up To 275 Lbs Width: (adjustable) At Least 22 To 29.5 Inches Height: (adjustable) At Least 30 To 45 Inches Seat Oxford Cloth Seat Accessories: Detachable Cushions I. General Requirements: 1. Original Signed Price Quotation; 2. Certified True Copy Of The Following: A) Philgeps Certificate; B) Mayor’s/business Permit; C) Valid License To Operate Issued By Philippines Food And Drug Administration; D) Certificate Of Product Registration/ Certificate Of Non-registrable/ Certificate Of Product Notification/ Certificate Of Medical Device Notification; E) Certificate Of Distributorship (manufacturer’s Authority) Or Sub-distributorship Certificate / Agreement From The Distributor; 3. Duly Notarized Omnibus Sworn Statement Together With Original Notarized Secretary’s Certificate Or Original Special Power Of Attorney 4. Warranty Certificate: One (1) Year Parts And Labor Under Normal Wear And Tear 5. Product Description/brochure. Documentary Requirements Must Be Submitted To The Sbac Secretariat Not Later Than The Deadline. Ii. General Conditions: • The Monthly Billing Statement With Complete Documentary Requirements Must Be Provided By The Service Provider A Week After The Applicable Month • All Quotations Shall Be Considered Fixed Price, And Not Subject To Price Escalation During Contract Implementation. • Supplier/contractor/ Service Provider Is Entitled To One (1) Quotation Only; Otherwise, All Quotations Made Shall Automatically Be Rejected. Iii. Terms Of Payment • Payment Shall Be Based On Actual Deliveries Made By The Supplier/contractor/ Service Provider. • The Terms Of Payment Shall Not Be Later Than Sixty (60) Days After Submission Of Sales Invoice And Complete Supporting Documents By The Supplier/contractor. • Pursuant To Circular Letter No. 2013-16 Of Department Of Budget And Management Dated December 23, 2013, The Supplier/contractor Is Encouraged To Open An Account With The Land Bank Of The Philippines (lbp), The Government Servicing Bank Of The Procuring Entity, To Facilitate Settlement Of Account Payables Due To The Supplier/contractor. All Charges Incurred For Payment Through Bank Transfer With Other Banks Shall Be For The Account Of The Supplier/contractor. Iv. Delivery Term • Delivery Term Shall Be Within Thirty (30) Calendar Days Upon Receipt Of Notice To Proceed. For Further Inquiries, You May Contact The Sbac Secretariat At Mobile No. (0917) 104 6556. The Quotation And Requirements Must Be Submitted/delivered To The Following Address: Jacquelyn M. Perez, Llb Head, Sbac Secretariat Rizal Medical Center Pasig Blvd., Pasig City 1600 Mobile No. (0917) 104 6556 The Rizal Med Reserves The Right To Reject Any Or All Quotations/bids, To Waive Any Minor Defects Therein, To Annul The Bidding Process, To Reject All Quotations/bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder(s), And To Accept Only The Offer That Is Most Advantageous To The Government. The Rizal Med Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Quotation/bid. Very Truly Yours, (sgd)ruth G. Valeriano, Md, Ffps, Fcnsp, Fpna Chairperson, Special Bids And Awards Committee

Details: Description The Dr. Jose Fabella Memorial Hospital Hereby Invites Interested Suppliers To Submit Quotation For The Supply And Delivery Of: Particular Quantity Unit Cost Total Cost Construction Of Dr. Jose Fabella Monument Base, Transfer And Installation Of Dr. Jose Fabella Statue And Plaque To The New Djfmh Building 1 Lot ₱ 687,546.09 Architectural Works Pre-construction Mobilization / Demobilization And Preliminaries 1 Lot Removal Of Statue From Monument Base And Transfer Of Dr. Jose 1 Lot Fabella Statue And Plaque From Old Djmfh, Lope De Vega St. To New Djmfh, Tayuman St. Manila Excavation And Formworks 1 Lot Construction Of New Monument Base Cement, 40kls/bag 30 Bag Sand, In Sacks 3 Cu.m Gravel, In Sacks 4 Cu.m Rebars, 10mmø X 6m, Grade 33 15 Piece Rebars, 16mmø X 6m, Grade 33 22 Piece Gi Wire #16 10 Kilo Concrete Hollow Blocks, 10cm X 20cm X 40cm 150 Piece Granite Slab, 18mm Thick, Light Gray 3 Sq. M Granite Slab, 18mm Thick, Brown 7 Sq. M Ball Top Post Stainless Steel Stanchion With 1.00m Rope Chain, 900mm X 63mm Dia. 16 Piece Paver Brick, 200mm X 100mm X 50mm Thick 80 Piece Pebble Stones, 20-40mm, 10kg/bag 25 Bag Stone Sealer, 1l/can 3 Can Stone Adhesive, 1.3l/jar 4 Jar Miscellaneous 1 Lot Installation Of Statue And Plaque To New Base Installation Of Dr. Jose Fabella Statue And Plaque To The New 1 Lot Monument Base Painting Works Repainting Of Statue And Repolishing Of Plaques Including Surface Preparation, Final Coating, Covering And Or Protection Of Exterior Surfaces To Be Affected And Other Works Including Use Of Tools & Equipment And All Necessary Items To Complete The Works Repainting Of Dr. Jose Fabella Statue 1 Lot Repolishing Of Plaques 1 Lot Painting Of Flooring Adjacent To Monument Base 51 Sq.m Electrical Works Waterproof Led Flood Light, 20 Watts, 230 Volts, Single Phase, White 2 Piece Pvc Pipe, 1/2" 8 L.m 3.5mm Thhn Copper Wire (red) 1 Box 3.5mm Thhn Copper Wire (white) 1 Box 3.5mm Thhn Copper Wire (green) 1 Box Imc Pipe (with Accessories) 3/4" 8 Piece G.i. Square Pull Box (4" X 4") 2 Piece Imc Elbow (3/4") 3 Piece Miscellaneous 1 Lot Note: 1. Site Inspection Is Needed For Quotation Purpose 2. All Materials Needed For The 100% Completion Of Project Shall Be Provided By The Supplier Without Any Cost. Total ₱ 687,546.09 Page 2 Request For Quotation (construction Of Dr. Jose Fabella Statue Monument Base And Plaque) Quotation Must Be Submitted To The Bac Secretariat Office, New Dr. Jose Fabella Memorial Hospital, Tayuman St., Manila On Or Before January 20 , 2025 To Submit Together With Quotation The Following Documents: 1. Philgeps Registration Certificate. 2. Mayor’s Permit 3. Omnibus Sworn Statement 4. Latest Income Tax Return 5. Pcab License For Details, Please Contact The Bac Secretariat At Bacfabella@yahoo.com. The Djfmh Reserves The Right To Accept Or Reject Any Or All Quotations, To Waive Any Defects Found Therein And To Accept Such Quotations As May Be Considered Advantageous To The Government. The Djfmh-bac Assumes No Obligation To Compensate Or Indemnify The Bidders For Any Expenses Or Losses That May Be Incurred In The Preparation Of Quotations Nor Does It Guarantee That An Award Will Be Made. (sgd) Maria Lu D. Andal, M.d. Chair, Bids And Awards Committee (for Infrastructure / Goods Non-medical Consulting Services / Non-medical Equipment / Services)

Details: The subject of the public contract is to ensure the implementation of construction modifications to the object, including: - Demolition of the concrete cover plate and the existing brick wall - Repair of the foundation of the wall in damaged areas consisting of demolition and concreting - Penetration and installation of waterproofing on the foundation - Construction of a solid brick wall - Installation of thick-walled PVC drain pipes, diameter 63 mm - Installation of new cover plates

Details: Description Fabrication, Improvement, Installation And Materials For Post Harvest Equipment (fiberglass/stainless Steel Equipment And Etc.) 1 Lot Elevated Solar Dryer (l=1.5m, H=1.5m, W=0.80m) With 12 Individual Drying Trays 1 Unit Frames Made Of Aluminum Square Tubings, Angle Bars And Flat Bars Platform For Drying Tray Made Of Aluminum Expanded Wire Top Cover Made Of Acrylic Sheet Fully Secured Using Aluminum Angle Bars Covering Materials For Side Walls Made Of Stucco Embosed Aluminum Sheets Bottom Cover Made Of Perforated Aluminum Sheet (circular Perforations) Upper Ventilation Covered With Stainless Steel Wire Mesh Screen All Accessories For Door Such As Hinges, Handle And Latch Made Of Stainless Steel Free Delivery On-site Please See The Attached Drawings For More Details Of The Specifications Motorcycle Fishbox With Bracket (customized) 4 Units Chest Cooler, 50qt Capacity, Wheeled And Durable; Free Delivery On-site 1 Pc Post Harvest Materials 1 Lot Food Dehydrator 2 Units Dimensions: 0.51m(l) X 0.41m(w) X 0.67m(h) Material: 304 Stainless Steel 20 Layers Voltage: 220v With Philippine Standard (ps) Mark/import Commodity Clearance (icc) Sticker Free Delivery On-site Insulated Fish Containers 8 Units Material: Food Grade Medium Density Polyethylene (mdpe) Resin With Uv Stabilizer; Process: Rotationally Molded; Insulator: Polyurethane Foam; 50 Liters Capacity, Color Blue, 0.535m X 0.487m X 0.450m With Engrave Bfar Logo, Foam Insulated Free Delivery On-site Please See The Attached Drawings For More Details Of The Specifications Electronic Digital Weighing Scale 30kg Capacity, Table Top 1 Unit Max. Weight: 30kg; With 5g Graduation Rechargeable: More Than 5 Days Lifespan Power Source: Either 220v Or 3 Pcs Size D; Display: Led Screen Table Size: 330x240mm; Waterproof Strong Base, Thickened Weighing Pan High Quality Sensor With Greater Measurement Capabilities Charging Voltage: 220-240v 50/60hz With Philippine Standard (ps) Mark/import Commodity Clearance (icc) Sticker; Free Delivery On-site Single Burner Heavy Duty Cast Iron Gas Stove With 11 Kg. Lpg Tank & Accessories 1 Unit Superior Heat Efficiency, Automatic Ignition Switch, Suitable For Indoor And Outdoor Use Burner Size: 31a 60cm X 34cm Hose: 1.2m Free Delivery On-site Refrigeration Equipment & Accessories 1 Lot Chest Freezer-inverter, 10.6 Cu.ft 1 Unit Solid Door With Sliding Glass Interior Light (led Light) With Four Wheel Roller Warranty: 2 Years On Parts And Labor: 5 Years On Compressor Free Delivery To Bfar Xi, Pfo-davao Occidental Fishing Supplies And Materials For Semi Commercial - Payao (1 Unit) 1 Lot P.e Rope #36, 18mm, 200m/roll 12 Rolls P.e Rope #16, 8mm, 200m/roll 1 Roll Stainless Swivel 3/4" X 6" Dia 1 Pc Rubber Tire Strips, 2" (15m/roll) 2 Rolls Rubber Tire Ring #17" Θ 33 Pcs Cable Wire #14, Galvanize 33 Meters Concrete Mooring, (customized: 20"x16"x24", Solid, With Tire Ring (9cm Width; 2.3 Cm Thickness); Weigth-1000kgs/piece 4 Pcs Mononylon 180lbs, (5rolls/kg) Durable, Strong, Glossy, Proven And Tested, With Long Life-span High Quality 1.5 Kgs Tie Wire No. 14, Galvanized Iron 27.5 Kgs Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Nothing Follows Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Purpose: To Be Used For Post Harvest, Fish Processing Operation And Replacement Of Materials For Damaged Semi Commercial Payao Under The Saad Phase Ii Project Implementation In Davao Occidental For Cy 2025.

Details: Rfq Type Goods Goods Corporate Merchandise Reference Number Gl12500469 Title Corporate Merchandise Description 70 Each X Laptop Sleeve Bag With Jcc 70 Each X Black Insulated Steel Bottles 70 Each X Black A4 Hardcover Journal Books 70 Each X Black Cap With Jcc Logo Branding In Colo Specification* Black Document/laptop Sleeve Bag With Jcc Logo In White Or Equivalent Spec Nylon Portfolio Folder Carrier (a4) Must Be Lightweight, Waterproof Zippered Nylon Portfolio Bag With Strap. To Include A Full Width Pocket And Elasticated Cross Straps For Safe And Secure Portability Pic Attached Nb!! Preferred Supplier To Sumbit Final Product For Approval To Communication Department For Final Approval. Samples Shall Be Supplied By A Bidder At His/her Own Expense And Risk. The City Shall Not Be Obliged To Pay For Such Samples Or Compensate For The Loss Thereof, Unless Otherwise Specified In The Bid Documents. The City Reserves The Right To Keep Samples Supplied By The Appointed Bidder. Unsuccessful Bidders Can Collect Their Samples Within 90 Days After The Final Notification Of Award Has Been Send To Suppliers, After Which The City Has The Right Not To Return Such Samples And To Dispose Of Them At Its Own Discretion. Please Note That After Closing Date Of Rfq It Will Be Request For Suppliers To Supplier To Submitt Actual Samples With In 3 To 4 Days "1. Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation,supplier To Complete Rfq Sample Checklist Attached To Ad 2. Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent# * Black Insulated Steel Bottles With Jcc Logo Branding In White Or Equivalent Specification Double Wall Hot And Cold 500ml Stainless Steel Water Bottle Black Spec Stainless Steel High Grade Quality Stainless Steel Construction With Unique Double Wall Vacuum Insulation Technology And Vacuum Seal Cap. Must Be Leak Proof, Suitable For Hot And Cold ,so They Can Be Useful All Year Round. Must Be Durable And Light Weight Sample Pic Attached. * Black A4 Hardcover Notebook Books With Jcc Logo Branding In White Or Equivalent # A4 In Size # Elastic Fastener # Flick Through 176 Pages/ 88 Sheets # Ribbon Page Marker # Expandable Inner Pocket Exterior 100% Polyurethane Interior 100% Paper Trim 70% Polyester, 30% Latex. Artwork Attached * Black Cap With Jcc Logo Branding In Colour Or Equivalent Sample Pic Attached. Delivery Date2025/02/28 Delivery Tosupport Services Suse Delivery Address0 Cape Town City Centre, Cape Town Contact Persondalmaine Cloete Telephone Number0214002496 Cell Number Closing Date2025/02/04 Closing Time04 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgl1.quotations@capetown.gov.za Buyer Detailsc.williams Buyer Phone0214001789 Attachments No Attachments Note On 1 August 2018 The City Of Cape Town Went Live With E-procurement Which Was Piloted With 3 Commodities Clothing, Building Hardware And Is&t. No Manual Submissions Will Be Accepted For These Commodities And Suppliers Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Description Item No. Description Qty Unit 1. Performance 1 Unit Signal Tracking: Gps L1 C/a, L2c, L2p, L5; Glonass L1 C/a, L2 C/a; Bds B1, B2, B3, Support Bds-3; Galileo E1, E5a, E5b; Qzss L1 C/a, L2c, L5 Channels: System & Data Operating System: Storage: Linux Built-in 16gb/8gb (1) Data Format: Cmr, Cmr+ (gps Only),rtcm 2.x/3.x Single Point Positioning Accuracy (rms): Data Output: Rinex, Nmea-0183, Tersus Binary Data Update Rate: 20hz Horizontal: 1.5m Vertical: 3.0m Software Support Dgps Positioning Accuracy (rms): Tersus Nuwa Horizontal: 0.25m Vertical: 0.5m High-precision Static (rms): Microsurvey Fieldgenius Communication Horizontal: 2.5mm+0.1ppm Cellular Vertical: 3.5mm+0.4ppm Cellular: Static & Fast Static (rms): Horizontal: 2.5mm+0.5ppm Cellular Bands: Vertical: 5mm+0.5ppm 4g Lte/td-scdma/wcdma/gprs/gsm Lte Fdd B1/b2/b3/b4/b5/b8/b20 Post Processed Kinematic (rms): Wcdma B1/b2/b5/b8 Horizontal: 8mm+1ppm Gsm/gprs 1900/1800/900/850mhz Vertical: 15mm+1ppm Real Time Kinematic (rms): Network Protocols: Ntrip Client, Ntrip Server, Tersus Caster Service (tcs) Horizontal: 8mm+1ppm Wi-fi: 802.11b/g (2) Vertical: 15mm+1ppm Bluetooth: 4.1 Network Real Time Kinematic (rms): Internal Radio Horizontal: 8mm+0.5ppm Rf Transmit Power: 0.5w/1w/2w Vertical: 15mm+0.5ppm Frequency Range: Observation Accuracy (zenith Direction): C/a Code: 10cm P Code: 10cm Carrier Phase: 1mm Operating Mode: Channel Spacing: Modulation Type: Air Baud Rate: 410mhz ~ 470mhz Half-duplex 12.5khz / 25khz Gmsk, 4fsk 4800/9600/19200bps Time To First Fix (ttff): Distance (typical): >5km Cold Start : <35s Radio Protocols: Warm Start: <10s Trim Talk450, Trimmark 3, South, Transparent, Satel Re-acquisition: <1s Wired Communication Tilt Compensation Accuracy (no Tilt Angle Limit): Usb Otg: <2cm(within 60°) (1) Serial Ports: Usb 2.0 X1 Rs232 X1 Timing Accuracy (rms): Velocity Accuracy (rms): 20ns 0.03m/s Com Baud Rate: Up To 921600bps Initialization (typical): Initialization Reliability: <10s >99.99%(3) 9~28v Dc Power Consumption (typical): Network Or Radio Receive Mode: ≈ 5w Radio Transmit Mode (0.5w): ≈ 8w Radio Transmit Mode (1w): ≈ 9w Radio Transmit Mode (2w): ≈ 11w Lithium Battery: 7.4v 6400mah X2(4) Technical Specifications - Continued Electrical Input Voltage: 1.54" Oled (1) 157x157x103mm ≈ 1.2kg (without Battery) ≈ 1.4kg (with A Battery) -40°c ~ +70°c -55°c ~ +85°c 100% Not Condensed Physical Display: Dimension: Weight: Operating Temperature: Storage Temperature: Relative Humidity: Dust- & Waterproof: Ip68 Pole Drop Onto Concrete: 2m Pole Drop Onto Concrete: 2m Vibration: Mil-std-810g,fig 514.6c-1

Details: Description "republic Of The Philippines Bicol Center For Health Development Bicol Regional Hospital And Medical Centeral Daraga, Albay" Request For Quotation Form Code: Fm-adm-bac-05 Effectivity: September 28, 2022 Revision: 1 Company Name: ___________________________________________ Date: February 4, 2025 Address: ___________________________________________ Quotation No. : N-25-02-050 Tin Number: ___________________________________________ Jr# 2025-01-094 Please Quote Your Best Offer For The Item/s Described Below, Subject To The Terms And Conditions Provided At The Dorsal Portion Of This Request For Quotation. Submit Your Quotation Duly Signed By You Or Your Representative In Sealed Envelope Not Later Than February 10 ,2025 At 9:00 Am. Mary Nathalie M. Cadag, Cpa, Mba Bac, Chairperson Telefax No.:(052) 483-0016/483-0015 After Having Carefully Read And Accepted The Terms And Conditions, I/we Submit Our Quotation/s For The Item/s As Follows: Item# Abc Item And Description Quantity Unit Unit Price 425,000.00 Request Of Labor And Materials For Fabrication And Printing Of Customized Advocacy Materials For Health Promotion Kit-7 Healthy Habits 1 Lot 1. Tote Bag Specifications: Dimensions: Heavy Duty Canvass Bag/tote Bag With Zipper, Size 15" X 15" Gusset" 4", Color: Black 2. Heavy Duty Workout Headband Specifications: Color: Assorted Color, Type: Stretchable Spandex 3. Umbrella Specifications: Automatic Foldable Umbrella, 5 Folds, Black Thick Fiber Ribs Waterproof With Silver Uv Protect Backing With Printed Logo, Dimensions: Standard Size ( Diameter: 38 Inches) Color: Black, Type: Automatic 0..0 4. Handy-portable Emergency Kit Specifications: Package Includes: 1 X Hard Case-bag, 10 X Band Aid (small), 1 X Hypo-allergic Surgical Tape 1 X Gauze Bandage (roll) 3""" X 6 Yards, 3 X Gauge Sponge 2""" X 2"", 6 X Alcohol Swabs, 1 X Cotton Swabs, 12 Pcs/pack, 1 X Emergency Blanket, 1 X Multi-survival Tool, 1 X Whistles 1 X Emergency Flashlight, 1 X Instant Ice Pack, Tourmiquet, 10 X Safety Pins 5. Advocacy Pen, Syringe Model Pen 6. Mood Jar Specifications: Glass Jar With Metal Cover, Size: Width: 2.95in And Height: 4.72in 7. Mouse Pad Specifications: With Printed Design, Dimension Prefferably; Length: 27 Inches, Height: 11.5 Inches Requirements To Be Attached Upon Submission Of Request For Quotation: 1. Submit Mandatory Requirement: A. Updated Mayors Permit B. Updated Philgeps Certificate Of Registration And Membership C. Itr D. Tax Clearance D. Omnibus Sworn Statement (oss) - (phu) Signature Over Printed Name Canvasser Contact No/s. Date P2- N-25-02-050 Request Of Labor And Materials For Fabrication And Printing Of Customized Advocacy Materials For Health Promotion Kit-7 Healthy Habits Terms And Conditions 1. Bidders Shall Provide Correct And Accurate Information Required In This Form. 2. Bidders May Quote For Any Or All The Items. 3. Price Quotation/s Must Be Valid For A Period Of Sixty (60) Calendar Days From The Date Of Submission. 4. Price Quotation/s, To Be Denominated In Philippine Peso Shall Include All Taxes, Duties And/or Levies Payable. 5. Quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. 6. Award Of Contract Shall Be Made To The Lowest Quotation Which Complies With The Minimum Technical Specifications And Other Terms And Conditions Stated Herein. 7. Any Interlineations, Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initiated By You Or Any Of Your Duly Authorized Representative/s. 8. The Item/s Shall Be Delivered Within ___ Calendar Days From Receipt Of Purchase Order. 9. Bidders Must Be Registered In The Phil-geps. 10. The Brtth Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Technical Specifications. 11. Liquidated Damages Equivalent To One Tenth Of One Percent (.001%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. The Brhmc Shall Rescind The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It.