Waterproofing Tenders
Waterproofing Tenders
Municipality Of La Trinidad, Benguet Tender
Software and IT Solutions
Corrigendum : Closing Date Modified
Philippines
Details: Description Invitation To Bid For The Procurement Of Ict Equipment For Road-drainage Network Audit And Mapping 1. The Municipal Government Of La Trinidad, Through The General Fund 2024 Intends To Apply The Sum Of Two Hundred Fifty Six Thousand Pesos (php256,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Procurement Of Ict Equipment For Road- Drainage Network Audit And Mapping. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipal Government Of La Trinidad, Benguet Now Invites Bids For The Project: Project Reference No.: 2024-12-6392-meo Name Of Project: Procurement Of Ict Equipment For Road-drainage Network And Mapping Project Location: La Trinidad, Benguet Contract Duration: Within 10calendar Days From Receipt Of The Notice To Proceed Brief Description: Qty. Unit Description 2 Unit Handheld Gps - Material: Polymer/silicon/glass - Waterproof - Power Source: Rechargeable Lithium-ion Battery Pack Included - Dimensions: 92x183x33mm - Product Weight: 410g (with Battery Pack) - Inclusions: Lithium-ion Battery Pack, Usb Cable, Documentation - Warranty: 12 Months - Features: Full Qwerty Keyboard, Customer Service Available For Messaging 24/7 2 Unit Laptop - 512 Gb To 1tb Ssd, - Display: 15.6” Full Hd (1920 X 1080), 144hz, Ips - Ram: 32gb Ddr4 - With At Least 7 Core Ultra Processors - Operating System: Windows 11 Pro - With Power Adapter And Cable - Mouse (wireless) With Aa Battery - Built In Webcam, Speaker And Microphone - Wifi And Bluetooth Connect - With Laptop Bag - Has Pre- Installed Basic Software - With 1 Year Warranty Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Of The Municipal Government Of La Trinidad, Benguet And Inspect The Bidding Documents At The Municipal General Services Office-extension, 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet From 8:00am To 5:00pm, Mondays To Fridays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 27- January 8, 2024 At Municipal General Services Office-extension, 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet And Upon Payment Of A Non-refundable Fee For The Bidding Documents In The Amount Of Five Hundred Pesos (php500.00). 6. The Municipal Government Of La Trinidad, Benguet Will Hold A Pre-bid Conference On (n/a) Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Municipal General Services Office-extension, 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet On Or Before January 8, 2024 At 9:00am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On January 8, 2024 At 10:00am At The 2nd Floor Municipal Disaster Risk Reduction Office, Km. 5 Pico, La Trinidad, Benguet. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Municipal Government Of La Trinidad, Benguet Reserves The Right To Reject Any And All Bids, Annul The Bidding Process, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Corazon A. Uyaan Head Bac Secretariat Bids And Awards Committee Office Municipal General Services Office-extension 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet Contact No.: 0969 – 334 – 9233 / (074) 619 - 2103 E-mail Address: Bac01latrinidad@yahoo.com Approved: (sgd) Yoshio P. Labi Bac Chairperson Noted: (sgd) Romeo K. Salda Head Of The Procuring Entity
Closing Date15 Jan 2025
Tender AmountPHP 256 K (USD 4.3 K)
Municipality Of Hinunangan, Southern Leyte Tender
Electrical and Electronics...+1Solar Installation and Products
Corrigendum : Tender Amount Updated
Philippines
Details: Description Republic Of The Philippines Province Of Southern Leyte Municipality Of Hinunangan Invitation To Bid For Purchase And Installation Of Solar Lights At Barangay Ambacon Project Id: 2025gf-07/2025274 1. The Municipality Of Hinunangan, Through The General Fund Of Lgu Budget Fy 2025 Intends To Apply The Sum Of One Million Pesos Only (php 1,000,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Purchase And Installation Of Solar Lights At Barangay Ambacon. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Item Description Quantity Unit Solar Lights 25 Sets Control Method: Light Control Plus Remote Control Plus Radar Sensor (no Motion Sensor) Solar Panel: Monocrystalline Silicon (5v/65w) Battery: 65000mah Lithium Iron Phosphate Battery Smd Lamp Beads: 360 Sanan Chips Size: 1100*340*55mm (l/w/h) Material: Aviation Aluminum + Optical Word Lens Waterproof Grade: Ip65 Charging Time: About 4 Hours Use Time: About 12-15 Hours Steel Lamp Pole Height: 19 Feet (6meters) Bottom Diameter: 4.26 Inches Of 130mm Top Diameter: 2.3 Inches Or 60mm Bracket Arm Length: 0.8 Meters Arm Diameter: 2.0 Inches Sharp Thickness: 2.3mm Base Plate Size: 230*230*8mm Stiffener Bolts: Yes Anchor Bolts: 180*180*500mm Finish: Hot Rolled Galvanized Sheet 2. The Municipality Of Hinunangan Now Invites Bids For The Purchase And Installation Of Solar Lights At Barangay Ambacon. Delivery Of The Goods Is Required Within 15 Calendar Days. Bidders Should Have Completed, Within Six Months From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. (i) Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Municipality Of Hinunangan, Southern Leyte And Inspect The Bidding Documents At The Address Given Below During Office Hours 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 7-27, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (php 1,000.00). 6. The Municipality Of Hinunangan Will Hold A Pre-bid Conference On January 14, 2025 At 2:00 Pm At The Bac Office 1st Floor New Municipal Building, Hinunangan, Southern Leyte, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before January 27, 2025 At 2:00pm. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On January 27, 2025 At 2:00pm At The Bac Office 1st Floor New Municipal Building, Hinunangan, Southern Leyte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. The Municipality Of Hinunangan, Southern Leyte Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 9. For Further Information, Please Refer To: Engr. Armando M. Notarte Municipal Engineer Lgu-hinunangan, Southern Leyte Contact No.: 09194881377 Email Address:lguhinunangan@yahoo.com ====================================================================================== (sgd)jocelyn D. Reytas Bac Chairperson Noted: (sgd)engr. Reynaldo C. Fernandez Municipal Mayor
Closing Date27 Jan 2025
Tender AmountPHP 1 Million (USD 17 K)
NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY USA Tender
Civil And Construction...+2Consultancy Services, Civil And Architectural Services
United States
Details: Amendment 0001 - The Due Date For Qualifications Has Been Extended To Monday, January 13, 2025, 2:00pm Est. Government Responses To Rfi's Have Been Attached To This Notice.
description:
this Is A Request For Qualifications For Architect And Engineering (a&e) Services. This Request Is 100% Set-aside For Small Business’s Registered Under The Applicable Naics Code 541330 – Engineering Services, With A Size Standard Of $25,500,000.
the National Institute Of Standards And Technology (nist), An Agency Of The U.s., Department Of Commerce, Intends To Award Multiple Indefinite Delivery Indefinite Quantity (idiq) Contract(s) For General Architectural And Engineering (a/e) Services For The Nist Gaithersburg Campus Located At 100 Bureau Drive, Gaithersburg, Md 20899. A/e Services Under The Contract May Include The Following:
evaluation And Feasibility Studies To Include Engineering Modeling And Simulation
demolition Of Nist Structures, Utilities, And Infrastructure
repair And/or Repair By Replacement, Modification/reconfiguration, Building Additions, And Upgrades To Nist Facilities (e.g., Laboratories/scientific Research, Office, Industrial). Including But Not Limited To Architectural, Mechanical, Electrical, Communications, Structural, Fire Protection, And Building Enclosure (e.g., Roofs, Windows, Foundations).
repair And/or Repair By Replacement, Modification/reconfiguration For Campus Utility Systems And Supporting Underground Structures
comprehensive Historical Assessments For The Preservation, Rehabilitation, And Restoration Of Historic Property
interior Design Services Consisting Of Programming And Space Assessment, Fit Plans, And Office Furniture To Enhance Aesthetics, Comfort, Efficiency, And Workplace Safety.
cost Estimating For Different Levels (e.g., Concept, Detailed Program, Project)
life Cycle Cost Analysis Identifying Cost Elements From Initial Concept Through Operations, Support, And Disposal.
hazardous Material Survey And Risk Assessment (e.g., Asbestos, Mold, Lead Paint)
roofing And Waterproofing Services Such As Visual Inspections And Existing Conditions Surveys, Failure Investigation, And Design For Repairs.
commissioning Design Including Assistance Of Development Owner’s Project Requirements (opr), Design Document Reviews, Development Of Commissioning Specifications And Or Initial Commissioning Plan
program Of Requirements (por) Development By Meeting With Campus Personnel And Confirming Design Intent For Building And/or Major Systems (e.g., Mechanical, Electrical, Plumbing, Structural, Controls, Security, Fire Alarm, Etc.)
value Engineering Analysis To Achieve Design Goals While Lowering Life Cycle Costs And Maintaining The Required Performance, Quality, Reliability, And Maintainability.
record Drawings Development From Compiled As-built Set.
surveying (e.g., Alta/ascm, Boundary, Topographic, Construction, Site Planning)
roads/sidewalks Repairs And Replacement
evaluation Of Items Requiring Earthwork Such As Excavation, Grading, Ponds, Drainage, Foundation, And Footings
landscaping Design
gates, Fencing, And Related Engineering Necessary To Support A Campus Environment
permit Applications Submission To Regulatory Authorities Based On Specific Project Requirements. To Be Coordinated With Cor And Or Ahj For Acceptance And Or Approval
environmental Compliance (state Or Federal) Conforming To Laws, Regulations, Standards, And Other Requirements
construction Quality Management To Include But Not Limited To Commissioning Services
contract Information:
the Period Of Performance Of The Idiq Contract(s) Shall Be Five (5) Years. Annual Fully Burdened Labor Rates Will Be Negotiated Prior To Award. All Services Will Be Ordered Via The Issuance Of Individually Negotiated Firm-fixed-price Or Notto-exceed Task Orders, Ranging In Value From $10,000 And $2,000,000. Each Idiq Contract Shall Include A Guaranteed Minimum Order Of $5,000. The Cumulative Amount Of All Task Orders Shall Not Exceed $9,800,000.
the Government Anticipates Award Of Three (3) Or More Idiq Contracts; However, The Actual Number Of Awards Shall Be Made At The Discretion Of The Government.
submission Requirements:
consideration Will Be Limited To Professional A/e Firms Licensed And Registered In Maryland Who Provide A/e Services Primarily In The Disciplines Of Architectural, Civil, Structural, Mechanical, Electrical, And Environmental Engineering For Pre-design, Design, And Post-design Of Research Laboratory Facilities.
firms Meeting The Above Requirements And Desiring Consideration Must Submit Their Qualifications By No Later Than The Date Specified In This Announcement Via Email To The Following Addresses Using The Email Subject Line “rfq Submission – General Ae Services Idiq Nb195000-25-00009”:
Trent.stevens@nist.gov
Guzel.gufranova@nist.gov
Teresa.harris@nist.gov
qualification Submissions Shall Include One (1) Original Electronic Copy In Adobe .pdf Format Of Their Standard Form 330 (sf-330) With Appropriate Data. Ae Firms Shall Include All Subcontractor's Resumes In Part 1 Of The Sf-330. Part 2 Of The Sf-330, General Qualifications, Should Also Be Submitted For Each Subcontractor Or Consultant. Indicate The Solicitation Number On All Documentation Submitted.
along With The Sf-330, Offerors Shall Include:
a Copy Of Your Current Registration In System For Award Management (sam);
proof Of Small Business Status;
a Cover Page That Provides:
offeror’s Name And Address;
offeror’s Uei Number; And,
the Name, Title, Email, And Phone Number For The Authorized Representative Of The Offeror.
submissions Will Be Evaluated By A Source Selection Evaluation Board (sseb) And Ranked Based On The Stated Evaluation Factors. The Government Will Then Establish A Competitive Range; Firms That Fall Within This Range Will Be Invited To Present Their Capabilities To The Sseb. Formal Solicitations Requesting Fee Proposals Will Be Issued To The Highest Qualified Firms As Determined By The Government.
request For Information (rfi)
questions And Rfi's Must Be Submitted No Later Than 1:00pm Et On 12/10/2024 Via Email To The Following Addresses Using The Subject Line “rfi - General Ae Services Idiq Nb195000-25-00009” :
Trent.stevens@nist.gov
Guzel.gufranova@nist.gov.
the Contracting Officer Will Post Government Responses To Rfi’s On This Site As An Amendment To This Announcement. Firms Are Responsible For Monitoring This Site For Amendments To The Request For Qualifications.
selection Criteria:
all Work Performed Shall Be Under The Direct Control And Supervision Of A Professional And Experience Licensed Architect/engineer Employed By The Prime Contractor Assigned As The Responsible Party.
part I: Evaluation Of Sf-330
prospective A-e Firms Will Be Evaluated Based On Their Demonstrated Competence And Qualifications For The Type Of Professional Services Required. The Agency Will Evaluate Each Potential A-e Firm In Terms Of This Announcement. The Selection Criteria Are Listed Below In Descending Order Of Importance:
factor 1: Specialized Experience
page Limit – 15 Pages
firms Who Fail To Meet The Qualifications Of Factor 1 Will Not Be Evaluated On Subsequent Evaluation Factors And Will Not Be Considered For Award.
offeror Shall Demonstrate The Specialized Experience And Technical Competence Of Its Firm And Its Proposed Subcontractors Performing A/e Services Meeting The Criteria Of This Solicitation Within The Past Sixty (60) Months By Providing At Least 3 But No More Than 5 Example Projects (sections F, G, And H Of The Sf330) Addressing Each Of The Subfactors Listed Below (1a, 1b, 1c, And 1d). Offeror Shall Provide At Least One Example For Subfactor 1d. All Designs Shall Be Completed At Time Of Request For Qualifications (rfq). For The Purposes Of This Evaluations, “completed” Projects Shall Mean Projects Where Final Work Was Submitted, Approved, And Accepted By The Project Owner.
A. The Offeror Shall Describe Design For Renovations With Dates That Include Commercial Window Replacements, Masonry Repairs, And Roofing Repairs. Roofing Designs Are For Replacement Of An Existing Roofing System And Would Include Design And Specifications For New Built-up Roofs (at Least Three Ply) Of At Least 20,000 Sf Minimum, Including Drains, Coping And Flashing. Built Up Roofing Can Either Be Hot Or Cold Applied.
B. The Offeror Shall Also Describe With Dates Laboratory Design For Renovations Of At Least 2,000 Sf Which Include Replacement Or New Fume Hood Installation Of A Fume Hood At Least Four Feet In Width, New Laboratory Grade Casework, New Seamless Flooring, And Plumbing That Includes Either Eye Wash Station Or Safety Showers. Laboratories Shall Be For Commercial Facilities, Federal And State Facilities, Hospitals, And College/universities. High School And Lower School Grade Laboratories Will Not Be Considered.
C. The Offeror Shall Describe With Dates Designs That Include Laboratory Facility Mechanical, Plumbing, And Electrical Renovations, Upgrades And Alterations That Include Major Utility Systems, Facility Construction And Reconfiguration, Branch Circuits Of At Least 50 Amperes At 208v Or 480v, 3 Phase Power For Installation Of Specialized Scientific Tools, Equipment And Instrumentation (provide Amperage, Phases, And Voltages In Offer). The Contractor Shall Describe Distribution Of Manifold Specialty Gasses Utilizing At Least One Of The Following (nitrogen, Helium, Compressed Air, Or A Custom Blend) Within The Lab (note Which Gas Was In Manifold).
D. The Offeror Shall Describe, With Dates, Life Safety And Code Compliance Of The Following: Ibc And Nfpa Analyses, Access And Egress Analyses, Fire Alarm Systems And Device Designs, Nfpa 13 Fire Suppression System Modification Calculations And New Installations, And Hazardous Detection Systems (radiological Or Toxic Gas Monitoring Systems). Note Which Detection System (radiological Or Toxic Gas Monitoring System) Is Being Referenced.
factor 2: Professional Qualifications
page Limit – 17 Pages
the Offeror Shall Demonstrate The Technical Expertise And Professional Qualifications Of Its Proposed Team, Including Subcontractors And Consultants, To Perform The Required A/e Services By Providing Résumés (section E Of The Sf330) For All Of The Following Disciplines:
principle
senior Architect
senior Cost Estimator
senior Civil Engineer
senior Electrical Engineer
senior Fire Protection Engineer
senior Geo-technical Engineer
senior Laboratory Planner
mechanical Engineer (piping)
senior Mechanical Engineer (piping)
senior Mechanical Engineer (hvac)
senior Environmental Engineer
senior Scheduler
senior Surveyor
senior Water Proofing Engineer
senior Structural Engineer
2. Senior Positions Of Each Discipline Shall Have A Minimum Of Ten (10) Years Applicable Experience And Shall Be Licensed And/or Certified In Their Applicable Discipline.
3. The Offeror Shall Identify The Roles Of Its Key Personnel By Provide Resumes/sf 330s For Its Proposed Key Personnel That Include Credentials, Education, Registrations, Relevant Experience, And Their Role In Performing Requirements Outlined In Factor 1.
4. The Offeror Shall Submit An Organizational Chart Showing The Interrelations Of The Proposed Team Including All Subcontractors And Consultants.
factor 3: Geographical Location
page Limit – 1
offeror Shall Be Within 50 Miles Of The Nist Main Campus In Gaithersburg, Md. Nist Address Is 100 Bureau Drive, Gaithersburg, Md 20899. Offeror Shall Demonstrate This Distance By Submitting Information (driving) Via An Internet Mapping Program. The Driving Shall Begin At The Offeror’s Office To Nist.
factor 4: Capacity
page Limit – 2 Pages
the Offeror Shall Describe Their Team, Including Subcontractors, Capability To Complete Simultaneous Tasks Within The Required Timeframe Based On Current And Planned Workload And Expected Backlog.
the Offeror Shall Confirm That There Is Sufficient Capacity Within The Firm, Or That Additional Professional Capacity Can Be Increased As Needed In A Timely Manner To Deliver Projects That Meet The Government’s Specialized Requirements.
factor 5: Past Performance
page Limit – None
offeror Shall Provide Past Performance Information For The Relevant Projects Identified In Their Factor 1 – Specialized Experience Submission In The Form Of Either A Contractor Performance Assessment Reporting System (cpars) Report Or The Provided Past Performance Questionnaires (ppqs).
if The Project Was Completed For The Federal Government, The Offeror Shall Provide A Copy Of The Most Recently Completed Contractor Performance Assessment Reporting System (cpars) Report.
if No Cpars Is Available, Offeror Shall Use The Provided Past Performance Questionnaire (ppq). Ppqs Shall Be Completed And Signed By The Customer Identified In The Relevant Project. Limit Of One Ppq Per Project.
if An Offeror Submits Incomplete Past Performance Or Fails To Submit Any Past Performance Information, The Government May Evaluate Past Performance Based On The Information Obtained Concerning The Offerors’ Performance Relevant To Services Similar In Scope, Complexity, And Size For The Prime Contractor. Additionally, The Following Resources Will Be Used For Evaluation:
contractor Performance Assessment Reporting Systems (cpars), Or Similar Systems Of Other Government Departments And Agencies,
interviews Within Nist If Offeror Holds/held Previous Contracts,
interviews With Program Managers And Contracting Officers, And;
other Sources Known To The Government, Including Commercial Sources.
in The Case Of An Offeror Without A Cpars Record Of Relevant Past Performance Or For Whom Information On Past Performance Is Not Available, The Offeror Shall Be Rated Neither Favorably Nor Unfavorably.
part Ii: Oral Presentations
in Accordance With Far 36.602-3, The Government Will Hold Discussions With At Least Three Of The Most Highly Qualified Firms (firms Within The Competitive Range). More Details Related To The Presentations Will Be Provide To The Firms That Are Selected To Move Forward.
fee Proposal
only Those Firms Selected For Award Will Be Invited To Provide A Fee Proposal. Firms Shall Submit Along With Their Fee Proposal A Copy Of Audited Overhead Rate Statement Prepared In Accordance With The Federal Acquisition Regulation (far), Part 31 For The Prime And Their Sub-consultants. The Audit Must Be From A Federal, State, Local Government Or An Independent Third-party Auditor In Accordance With Far 31. Audit Conducted In Accordance With Generally Accepted Accounting Principles (gaap) Will Not Be Accepted.
Closing Date13 Jan 2025
Tender AmountRefer Documents
City Of Trece Martires Tender
Textile, Apparel and Footwear...+1Furnitures and Fixtures
Philippines
Details: Description Table (80cm X 50cm ) 1 Pc ₱4,500.00 Minimalist Home Office Desk Table (80cm X 50 Cm X 74 Cm) 2ft 8in X 20in X 2ft 5in, Wood Panel, Type: Panelboard Chairs(monoblock) 10 Pcs ₱7,500.00 Bookshelves (33.5 X 64 X 164 Cm) Lwh 2 Pc ₱14,500.00 Size:64x33.5x164cm (lqwh, Beige, Particle Board, Metal Frame 5 Layers Bookshelf Curtains (white/215cm X 150 Cm) 2 Pcs ₱1,300.00 1pc Plain Fabric Curtain With Rings 200*130cm For Window Door Room Colorful Decoration, Size 200(l)*130cm (w) First Aid Kit 1 Pc ₱3,900.00 Size: 22.1x17.2x9,3cm/8.7x6.7inch Weight:840g/1.8lbs,600d Polyester Color:green Packaging Includes (165pcs) 1 Xfirst Aid Kit Bag 60 X Adhesive Dressings 2x Triangular Bandage 96*96*136cm X 1first Aid Booklet 2 X Pressure Bandages 10*450cm 1x Hypo Allergenic Tape Whiteboard(90cm X 60cm) 3 Pc ₱5,100.00 Whiteboard Eraser 3 Pcs ₱225.00 Cork Board (90cm X 60cm) 3 Pcs ₱5,250.00 Whiteboard Markers 12 Box ₱1,140.00 Bond Papers (long) 5 Ream ₱2,850.00 Cartolina (lighth Colors) 20 Pcs ₱2,100.00 Ballpens 5 Boxes ₱1,315.00 Notebook 20 Pcs ₱600.00 Pencil 12 Boxes ₱1,356.00 Crayons 10 Boxes ₱600.00 8 Color Nontoxic Generic Crayons Art & Crafts School Supplies Packing Tape4 5 Pcs ₱375.00 Double Sided-tape 5 Pcs ₱225.00 12mm-1/2inch / 18mm-3/4inch Rubber Mats For Toddlers 2 Sets ₱1,300.00 Number + Alphabet (36pcs):15cm*15cm Hammocks For Toddler 3 Pcs ₱2,250.00 Made Of Solid Rattan Wood With Quality Polyester/cotton (small) Sewing Kits Inclusion: 30sets Of Content:rolls, 1x Needle Piercing Device, 10pcs Hand Sewing Needles, Scissors 1pc, 1 Thimble, Tape 1pcs 2 Pcs ₱900.00 Portable Sewing Machine 1 Pc ₱12,300.00 Max. Sewing Speed:350 Spm Max. Sewing Thickness:2.5 Mmpower: 7.2 Winput: 220v-240v 50/60hzoutout:dc 6v 1200ma/4aa Batteries Product Size: 26x27x12cmplug Type: Uk Plug Pillows Vaccumbale 5 Pcs ₱2,250.00 Pillow Cases(18 X 28) 5 Pcs ₱1,125.00 Blanket (single) 5 Pcs ₱2,250.00 Sleeping Mat Water Proof Air Mattres 5 Pcs ₱7,750.00 Color: Blue/navy Blue/orange/camouflage (optuional) Material: Nylon +tpu: Bearing Capacity: Max 200kg/ 440lb: Inflating Size: 190*60*5cm/ Weight: Approx.590g/1.3lb/package Size:26*10*10cm/package Size:approx.800g Toys For Toddlers 20 Pcs ₱6,000.00 Ability Of Thought And Practice, Visual, Interest Training, Sensory, Parent-child Communication, Hand-eye Coordination, Interactive Safe And Non- Toxic/specifications: Material: Wooden Applicable Age: 12 Months+ Size 20* 20cm Breast Feeding Anti-glare Cove 10 Pcs ₱3,500.00 Cotton, 100*70cm, Package Includes:1pc * Breasfeeding Covers, 1 Storage Bag Flashlight 10 Pcs ₱3,500.00 Lamp Core: White Laser Lamp Core+cob (side Lamp), Product Performance: Long Range 5000n+: Lighting Mode: Strong Light/medium Light/strobe/side Lightd, Weight: 130g/ Charging Method: Type-c Fast Charge/ Usb/ Size 160* 45mm/ Power Sjupply Method: 18650 Power Power Lithium Battery/ Material: High Strenght Abs Material/ Waterproof Performance: Ipx4 Storage Box (90l) Clear 3 Pcs ₱2,070.00 "kids Thick Rectangle Table With 6 Chairs (120 1 X 60w X 52h Cm) " 4 Sets ₱30,000.00 Multi Functional Wooden Bookshelf (5 Layer 80x24 X 150 Cm) 4 Unit ₱18,000.00 Storage Box (75l) 2 Boxes ₱1,560.00
Closing Date2 Jan 2025
Tender AmountPHP 147.5 K (USD 2.5 K)
Bureau Of Fisheries And Aquatic Resources Region Xi Tender
Food Products
Philippines
Details: Description Marketing Assistance And Enterprise Development Training Catering Services Inclusions: * Buffet Lunch - 1 Meal With Rice, 2 Viands (non Pork), Soup, Side Dish And Desserts Viand Menu Either Of The Following: Beef Soup / Native Chicken Tinola / Fish Tinola / Beef Steak / Fried Chicken / Grilled Tuna / / Chopsuey / Pansit Dessert Menu: Fresh Fruits / Buko Pandan / Fruit Salad * Snacks - 2 (am And Pm) Filipino Delicacies / Kakanin With Drinks * Within Davao Occidental * Drinks (soda In Plastic Bottle / Fruit Juice In Can) * With Free Flowing Coffee And Water * Delivery To Training Venue 2 Venue For 2 Association 1 Catering Services For Jose Abad Santos 1 Lot ₱208,000.00 "training On Basic Business Recording Cum Entrepreneurial Mind Setting And Values Formation/basic Pricing And Costing 1 Meal And 2 Snacks For 3 Days" Venue: Caburan Small 35 Pax Date: Tba 35 Pax Per Day X 3 Days Venue: Culaman 45 Pax Date: Tba 45 Pax Per Day X 3 Days "catering Services For Coordination Meeting 1 Meal And 2 Snacks For 1 Day" Venue: Caburan Small 35 Pax Date: Tba Venue: Culaman 45 Pax Date: Tba 2 Catering Services For Don Marcelino 1 Lot ₱192,000.00 "training On Basic Business Recording Cum Entrepreneurial Mind Setting And Values Formation/basic Pricing And Costing 1 Meal And 2 Snacks For 3 Days" Venue: Kinanga 35 Pax Date: Tba 35 Pax Per Day X 3 Days Venue: Talaguton 45 Pax Date: Tba 45 Pax Per Day X 3 Days "catering Services For Coordination Meeting 1 Meal And 2 Snacks For 1 Day" Venue: Kinanga 35 Pax Date: Tba Venue: Talaguton 45 Pax Date: Tba Catering Services For Malita 1 Lot ₱253,000.00 "training On Basic Business Recording Cum Entrepreneurial Mind Setting And Values Formation/basic Pricing And Costing 1 Meal And 2 Snacks For 3 Days" Venue: Lais 35 Pax Date: Tba 35 Pax Per Day X 3 Days Venue: Mana 35 Pax Date: Tba 35 Pax Per Day X 3 Days Venue: Ticulon 45 Pax Date: Tba 45 Pax Per Day X 3 Days "catering Services For Coordination Meeting 1 Meal And 2 Snacks For 1 Day" Venue: Lais 35 Pax Date: Tba Venue: Mana 35 Pax Date: Tba Venue: Ticulon 45 Pax Date: Tba 3 Catering Services For Sarangani 1 Lot ₱81,000.00 "catering Services For Coordination Meeting 2 Meals And 2 Snacks For 1 Day" Venue: Mabila 36 Pax Date: Tba Specialized Training On R.a 10654 And Other Relevant Fisheries Administrative Orders (2 Meals And 2 Snacks For 1 Day) Venue: Mabila 36 Pax Date: Tba Ceremonial Turn-over (1 Meal Only) Venue: Mabila 36 Pax Date: Tba 4 Iec Materials 1 Lot ₱122,500.00 20oz Thermal Flask With Box 10 Pcs Bomber Jacket With Embroided Bfar-saad Logo 25 Pcs S-4 Pcs , M-11 Pcs, L-9 Pcs, Xl-1 Pc Please See The Attached Design Bonnie Hat 25 Pcs Color: Black Other: Breathable Wide, Brim, Outdoor Waterproof, With Embroided Bfar Saad Logo Dri Fit T-shirt With Saad Logo 50 Pcs S-5 Pcs , M-10 Pcs, L-25 Pcs, Xl-10 Pcs Please See The Attached Design 5 Training Supplies 1 Lot ₱43,500.00 Tarpulin 3x6 Ft 9 Pcs Certificate Holder With Bfar Logo, A4 Size 210mm X 297mm 40 Pcs Photo Paper 180grams (20pcs/pack), Transparent, A4 15 Packs Spiral Notebook (100 Leaves) 196 Pcs Ballpen (good Quality, Fine 0.5) Black, Retractable 6 Box Expanded Envelope (long) Blue, Garterized Lock 300 Pcs Alcohol 70% Big 500ml, Ethyl 8 Bottle White Board Marking Pen (broad, Red) 10 Pcs Marking Pen (broad, Black) 10 Pcs Marking Pen (broad, Blue) 10 Pcs Bookpaper S.20 (8.5" X 13") 5 Ream Bookpaper S.20 (a4) 5 Ream Toilet Paper, 3 Ply 100mmx90mm 30 Roll Unscented Facial Tissue 2 Ply: 250 Pulls 10 Box Garbage Bag, Xxl Size, 10pcs/pack 10 Pack Kitchen Towel 2 Ply 70 Pulls 10 Roll Wireless Mouse 4 Pcs Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Nothing Follows Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Purpose: For The Bfar Saad Program Phase 2 Implementation In Davao Occidental For Cy 2025
Closing Date24 Jan 2025
Tender AmountPHP 900 K (USD 15.3 K)
Rizal Medical Center Tender
Healthcare and Medicine
Philippines
Details: Description Request For Quotation Rfq No. 2025-041 The Rizal Medical Center (rizal Med) Through Its Special Bids And Awards Committee (sbac), Hereby Invites All Interested Suppliers Or Distributors Registered With The Philippine Government Electronic Procurement System (philgeps), To Submit Their Quotation On The Item Listed Below, Subject To The General Conditions Stated Herein, And Submit Not Later Than 27 January 2025. Name Of Project: Procurement Of Digital Handheld Periapical X-ray With Sensor Mode Of Procurement: Negotiated Procurement Sec. 53.9 – Small Value Procurement Approved Budget For The Contract: Three Hundred Twenty Thousand Pesos (php320,000.00) Item No. Description Unit Qty Unit Cost (php) Total Abc (php) 1 Dental Handheld Periapical X-ray With Sensor Portable X-ray -high Frequency Generator -low Radiation Dose -high Level Of Safety Protection -top Tube Voltage And Tube Current Parameters Value -tube Voltage And Tube Current Can Be Manually Adjusted -screen: Capacitive Touch Screen -tube Pressure:60.0, 60.5, 70k (adjustable In 3 Levels) -tube Current: 2.5, 3.5ma (adjustable In 2 Levels) -focus Size: 0.4mm -focus Skin Distance: 200.0mm -exposure Time: 0.01-1.0s -kv Ripple Frequence: <1.0% Inverting Frequency: >100.0khz -special Function: Operation With Remote Control -lithium Battery Capacity: Dc22.2v/950.0mah -radiation Dose: 2.447mgy -surface Leakage Radiation: 0.0007msv Digital Sensor -technology: Photon-counting Chip Without Scintillator Direct Conversion -dynamic Range: 16 Bits -actual Resolution: 12-14ip/mm -active Area: 25 X 30mm -dimension 30 X 37 -thickness: 5mm -imaging Time: 3 Sec Imaging Format: Bmp/dir/dcm/jpeg/png/tiff -connection: Usb 2.0 -waterproof: Ip67 -cable: 3m (extendable) -support System: Windows 7,8,10 -50 Inches Large Floor Standing Interactive Touch-screen Monitor/kiosk Unit 1 320,000.00 320,000.00 I. General Requirements: 1. Original Signed Price Quotation 2. Certified True Copy Of The Following: A) Philgeps Certificate B) Mayor’s/business Permit C) Valid License To Operate Issued By Philippines Food And Drug Administration D) Certificate Of Product Registration/ Certificate Of Non-registrable/ Certificate Of Product Notification/ Certificate Of Medical Device Notification. E) Certificate Of Distributorship (manufacturer’s Authority) Or Sub-distributorship Certificate / Agreement From The Distributor. 3. Duly Notarized Omnibus Sworn Statement Together With Original Notarized Secretary’s Certificate Or Original Special Power Of Attorney 4. Warranty Certificate: Warranty For Five (5) Years On Parts And Service. 5. Product Description/ Brochure. 6. Documentary Requirements Must Be Submitted To The Sbac Secretariat Not Later Than The Deadline. Ii. General Conditions: • The Monthly Billing Statement With Complete Documentary Requirements Must Be Provided By The Service Provider A Week After The Applicable Month • All Quotations Shall Be Considered Fixed Price, And Not Subject To Price Escalation During Contract Implementation. • Supplier/contractor/ Service Provider Is Entitled To One (1) Quotation Only; Otherwise, All Quotations Made Shall Automatically Be Rejected. Iii. Terms Of Payment • Payment Shall Be Based On Actual Deliveries Made By The Supplier/contractor/ Service Provider. • The Terms Of Payment Shall Not Be Later Than Sixty (60) Days After Submission Of Sales Invoice And Complete Supporting Documents By The Supplier/contractor. • Pursuant To Circular Letter No. 2013-16 Of Department Of Budget And Management Dated December 23, 2013, The Supplier/contractor Is Encouraged To Open An Account With The Land Bank Of The Philippines (lbp), The Government Servicing Bank Of The Procuring Entity, To Facilitate Settlement Of Account Payables Due To The Supplier/contractor. All Charges Incurred For Payment Through Bank Transfer With Other Banks Shall Be For The Account Of The Supplier/contractor. Iv. Delivery Term • Delivery Term Shall Be Within Thirty (30) Calendar Days Upon Receipt Of Notice To Proceed. For Further Inquiries, You May Contact The Sbac Secretariat At Mobile No. 0917 104-6556. The Quotation And Requirements Must Be Submitted/delivered To The Following Address: Jacquelyn M. Perez, Llb Head, Sbac Secretariat Rizal Medical Center Pasig Blvd., Pasig City 1600 Mobile No. 0917 104-6556 The Rizal Med Reserves The Right To Reject Any Or All Quotations/bids, To Waive Any Minor Defects Therein, To Annul The Bidding Process, To Reject All Quotations/bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder(s), And To Accept Only The Offer That Is Most Advantageous To The Government. The Rizal Med Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Quotation/bid. Very Truly Yours, (sgd.) Ruth G. Valeriano, Md, Ffps, Fcnsp, Fpna Chairperson, Special Bids And Awards Committee
Closing Date27 Jan 2025
Tender AmountPHP 320 K (USD 5.4 K)
Bureau Of Fisheries And Aquatic Resources Region Xi Tender
Food Products
Philippines
Details: Description Marketing Assistance And Enterprise Development Training Catering Services Inclusions: * Buffet Lunch - 1 Meal With Rice, 2 Viands (non Pork), Soup, Side Dish And Desserts Viand Menu Either Of The Following: Beef Soup / Native Chicken Tinola / Fish Tinola / Beef Steak / Fried Chicken / Grilled Tuna / / Chopsuey / Pansit Dessert Menu: Fresh Fruits / Buko Pandan / Fruit Salad * Snacks - 2 (am And Pm) Filipino Delicacies / Kakanin With Drinks * Within Davao Occidental * Drinks (soda In Plastic Bottle / Fruit Juice In Can) * With Free Flowing Coffee And Water * Delivery To Training Venue 2 Venue For 2 Association 1 Catering Services For Jose Abad Santos 1 Lot ₱208,000.00 "training On Basic Business Recording Cum Entrepreneurial Mind Setting And Values Formation/basic Pricing And Costing 1 Meal And 2 Snacks For 3 Days" Venue: Caburan Small 35 Pax Date: Tba 35 Pax Per Day X 3 Days Venue: Culaman 45 Pax Date: Tba 45 Pax Per Day X 3 Days "catering Services For Coordination Meeting 1 Meal And 2 Snacks For 1 Day" Venue: Caburan Small 35 Pax Date: Tba Venue: Culaman 45 Pax Date: Tba 2 Catering Services For Don Marcelino 1 Lot ₱192,000.00 "training On Basic Business Recording Cum Entrepreneurial Mind Setting And Values Formation/basic Pricing And Costing 1 Meal And 2 Snacks For 3 Days" Venue: Kinanga 35 Pax Date: Tba 35 Pax Per Day X 3 Days Venue: Talaguton 45 Pax Date: Tba 45 Pax Per Day X 3 Days "catering Services For Coordination Meeting 1 Meal And 2 Snacks For 1 Day" Venue: Kinanga 35 Pax Date: Tba Venue: Talaguton 45 Pax Date: Tba Catering Services For Malita 1 Lot ₱253,000.00 "training On Basic Business Recording Cum Entrepreneurial Mind Setting And Values Formation/basic Pricing And Costing 1 Meal And 2 Snacks For 3 Days" Venue: Lais 35 Pax Date: Tba 35 Pax Per Day X 3 Days Venue: Mana 35 Pax Date: Tba 35 Pax Per Day X 3 Days Venue: Ticulon 45 Pax Date: Tba 45 Pax Per Day X 3 Days "catering Services For Coordination Meeting 1 Meal And 2 Snacks For 1 Day" Venue: Lais 35 Pax Date: Tba Venue: Mana 35 Pax Date: Tba Venue: Ticulon 45 Pax Date: Tba 3 Catering Services For Sarangani 1 Lot ₱81,000.00 "catering Services For Coordination Meeting 2 Meals And 2 Snacks For 1 Day" Venue: Mabila 36 Pax Date: Tba Specialized Training On R.a 10654 And Other Relevant Fisheries Administrative Orders (2 Meals And 2 Snacks For 1 Day) Venue: Mabila 36 Pax Date: Tba Ceremonial Turn-over (1 Meal Only) Venue: Mabila 36 Pax Date: Tba 4 Iec Materials 1 Lot ₱122,500.00 20oz Thermal Flask With Box 10 Pcs Bomber Jacket With Embroided Bfar-saad Logo 25 Pcs S-4 Pcs , M-11 Pcs, L-9 Pcs, Xl-1 Pc Please See The Attached Design Bonnie Hat 25 Pcs Color: Black Other: Breathable Wide, Brim, Outdoor Waterproof, With Embroided Bfar Saad Logo Dri Fit T-shirt With Saad Logo 50 Pcs S-5 Pcs , M-10 Pcs, L-25 Pcs, Xl-10 Pcs Please See The Attached Design 5 Training Supplies 1 Lot ₱43,500.00 Tarpulin 3x6 Ft 9 Pcs Certificate Holder With Bfar Logo, A4 Size 210mm X 297mm 40 Pcs Photo Paper 180grams (20pcs/pack), Transparent, A4 15 Packs Spiral Notebook (100 Leaves) 196 Pcs Ballpen (good Quality, Fine 0.5) Black, Retractable 6 Box Expanded Envelope (long) Blue, Garterized Lock 300 Pcs Alcohol 70% Big 500ml, Ethyl 8 Bottle White Board Marking Pen (broad, Red) 10 Pcs Marking Pen (broad, Black) 10 Pcs Marking Pen (broad, Blue) 10 Pcs Bookpaper S.20 (8.5" X 13") 5 Ream Bookpaper S.20 (a4) 5 Ream Toilet Paper, 3 Ply 100mmx90mm 30 Roll Unscented Facial Tissue 2 Ply: 250 Pulls 10 Box Garbage Bag, Xxl Size, 10pcs/pack 10 Pack Kitchen Towel 2 Ply 70 Pulls 10 Roll Wireless Mouse 4 Pcs Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Nothing Follows Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Purpose: For The Bfar Saad Program Phase 2 Implementation In Davao Occidental For Cy 2025
Closing Date28 Jan 2025
Tender AmountPHP 900 K (USD 15.3 K)
City Of Bayawan Tender
Civil And Construction...+1Construction Material
Philippines
Details: Description Invitation To Bid The City Of Bayawan, Through Its Bids And Awards Committee (bac), Invites Suppliers / Manufacturers / Distributors / Contractors To Bid For The Hereunder Projects: Lot No. I Tarpaulin Printing 1 4 Lot "labor And Materials ( Tarpaulin Printing ) 4 Sets - 2' X 4' (signage)" Lot No. Iii Sand & Gravel 4 7 Cu.m. Sand, Washed, Mixing/screened 5 8 Cu.m. Gravel, Mixing, Crushed, Screened & Washed, Max. Size 38mm Dia Lot No. V Construction Supplies/materials 16 72 Kg/s Tie Wire, # 16 17 3 Kg/s Nylon, #100 18 5 L.m. Mesh Wire, 3mm Eyehole X 0.90m Width (m) 19 15 Pc/s Blade, Hacksaw, 12mm X 300mm, 18tpi, (excellent Quality) 20 5 Kg/s Nails, Concrete, 75mm 21 6 Kilo/s Nails, Umbrella/roofing, 62mm 22 2 Box/es Nails, Common Wire, 100mm (25kgs/box) 23 1 Box/es Nails, Common Wire, 75mm (25kgs/bx) 24 1 Box/es Nails, Common Wire, 62mm (25kgs/box) 25 1 Box/es Nails, Common Wire, 38mm (25kgs/box) 26 3 Box/es Rod/electrode, Welding, E6013, 1/8" (bx)) (matchless Quality, Iso 9001, 2000 Certified, 20 Kg/box) 27 6 Pc/s Drill Bit, Masonry, 1/8" Dia 28 9 Pc/s Drill Bit, 1/8" Dia, For Steel 29 3 Pc/s Drill Bit, 3/16" Dia, For Steel 30 3 Pc/s Drill Bit, 1/4" Dia, For Steel 31 3 Pc/s Drill Bit, 3/8" Dia, For Steel 32 3 Pc/s Drill Bit, Masonry, 3/16" Dia 33 3 Pc/s Drill Bit, Masonry, 1/4" Dia 34 3 Pc/s Drill Bit, Masonry, 3/8" Dia 35 13 Pc/s Cutting Disc, Masonry/concrete, 100mm 36 10 Pc/s Cutting Disc, 100mm Dia, For Metal 38 5 Can/s Silicon Sealant, (300ml/can), For Polycarbonate 39 2 Can/s Sealant, Elastomeric/roof (1 Lit/can) 40 2 Can/s Solvent Cement, Pvc (500 Cc/can) 41 2 Roll/s Sack Cloth, 2.40m Width (100m/roll), Blue 42 10 Can/s Epoxy All Purpose (a And B), 1/4 Lit/can, Non Conductive, All Purpose Adhesive 43 50 Set/s Lag Screw, 6mm Dia. X 32mm With Expansion Shield 44 200 Set/s Bolt, Fine Threaded, 3.5mm X 25mm, With Nut And Washer 45 1 Sheet/s Steel Plate, G.i., Gauge # 16 X 1.2m X 2.4m 46 20 Pc/s Tiles, Granite, Polished, 0.60m X 0.60m, Color: Jet Black 47 65 Pc/s Tiles, Floor, Ceramic, 40cm X 40cm Non Skid 48 14 Pc/s Staircase Nosing, Brass Ochre (2m/length) 49 6 Pack/s Tile Grout (2kg/pk), Light Beige 50 1 Can/s Acrylic Spray Paint, Flat Black(400cc/can) 51 1 Lit/s Paint, Enamel, Quick Dry (lit), Red 52 10 Gal/s Paint, Rubberized (gal), Chlorinated, Floor Coating, Marking Yellow Or Equivalent 53 5 Gal/s Paint, Rubberized (gal), Chlorinated, Floor Coating, Black 54 12 Gal/s Paint, Rubberized (gal), Chlorinated, Floor Coating, White Or Equivalent 56 1 Gal/s Paint, Epoxy, Silver Finish With Aluminum With Catalyst 57 15 Gal/s Paint, Epoxy, Enamel, Black (gal) 58 4 Gal/s Enamel Paint, Silver Finish Aluminum (gal) 59 3 Can/s Thinner, Lacquer (3.75lit/can) 60 11 Gal/s Reducer/thinner, Epoxy Paint (gal) 61 8 Gal/s Adcoat Rust Converter And Primer 62 6 Gal/s Liquid Tile Paint, Primer White Acrylic Solvent-based Primer 63 6 Gal/s Liquid Tile, Topcoat Gloss White 64 4 Gal/s Liquid Tile, Top Coat Clear 65 5 Can/s Liquid Tile, Solvent Based-tinting Color Venetial Red, 1/4lit Per Can 66 5 Can/s Liquid Tile, Solvent Based-tinting Color Thalo Blue, 1/4lit Per Can 67 5 Can/s Liquid Tile, Solvent Based-tinting Color Thalo Green, 1/4lit Per Can 68 5 Can/s Liquid Tile, Solvent Based-tinting Color Hanza Yellow, 1/4lit Per Can 69 5 Can/s Liquid Tile, Solvent Based-tinting Color Lamp Black, 1/4lit Per Can 70 5 Gal/s Liquid Tile, Reducer Clear Liquid 71 10 Gal/s Plexibond, Cementitious Waterproofing System, Acrylic 72 10 Pc/s Sand Paper, #80, 225mm X 275mm 73 10 Pc/s Sand Paper, #100, 225mm X 275mm 74 10 Pc/s Sand Paper, #120, 225mm X 275mm 75 10 Pc/s Sand Paper, # 180, 225mm X 275mm 76 14 Pc/s Paint Roller W/ Handle, 100mm 77 150 Meter/s Service Drop Wire, # 4 Awg (m) 78 5 Pc/s Service Grip, # 2 79 4 Pc/s Service Grip, Dead End Performed Type, Size # 4awg 80 1 Length/s Pipe, Pvc, 40mm Dia X 3m, W/ Entrance Cap, Clip Type 81 70 Meter/s Thw Wire, # 4 (22mm2), Black (m) 82 70 Meter/s Thw Wire, # 4 (22mm2), White (m) 83 40 Meter/s Thw Wire, # 6 (14mm2), Stranded(m), Green 84 1 Roll/s Thw Wire, # 10 (5.5mm2), Stranded (150m/bx), Black 85 1 Roll/s Thw Wire, # 10 (5.5mm2), Stranded (150m/bx), White 86 1 Roll/s Thw Wire, # 10 (5.5mm2), Stranded (150m/bx), Green 87 6 Roll/box Thw Wire, # 12 (3.5mm2), Stranded (150m/roll/bx), Black 90 1 Length/s Pipe, G.i. 65mm Ø X 6m, Wt=5.20mm , Outside Dia= 73.00, 8.694kg/m, Heavy Gauge 92 1 Pc/s Circuit Breaker, 100a, 2 Pole, Bolt-on, Single Phase W/ Casing, Outdoor Type 93 1 Pc/s Circuit Breaker, 30a, 2 Pole, Bolt-on 94 3 Pc/s Circuit Breaker, 20a, 2 Pole, Bolt-on, Single Phase W/ Casing, Outdoor Type 95 4 Roll/s Royal Cord, # 14 Awg, 2 Wire (75m/roll) 96 7 Length/s Pipe, Pvc, Electrical, 40mm Dia X 3m, Thickwall, Orange 97 200 Length/s Pipe, Pvc, Electrical, 25mm Dia X 3m, Thickwall, Orange 98 150 Length/s Pipe, Pvc, Electrical, 20mm Dia X 3m, Thickwall, Orange 99 3 Pack/s C-clamp/clip, Pvc, 20mm Dia, W/ Concrete Nails (100's/pk) 100 6 Pack/s C-clamp/clip, Pvc, 25mm Dia W/ Concrete Nails (100pcs/pk) 101 3 Pack/s Pipe Connector, Pvc, Electrical, 20mm Dia (100's/pk)) 102 3 Pack/s Pipe Connector, Pvc, Electrical, 25mm Dia (100pcs/pk) 103 10 Pc/s Connector, Split Bolt, # 6 (14mm2), Burndy 104 3 Set/s Magnetic Contactor, 40a 220-240vac Coil W/ Metal. Enclosure 105 2 Pc/s Photo Control (photo Switch), 220v, 6a, Operating Illumination: Turn-on At 31.5 Lux, Turn-off At 125 Lux 106 2 Unit/s Timer, Time Switch, 24hr Back Up 107 50 Roll/s Tape, Electrical, Vinyl, .177mm X 3/4"/19mm X 16m, Flame Retardant, 600v 108 5 Roll/s Tape, Electrical, Rubber, 18mm X 5m, Self Fusing Ethylene Propylene Rubber 109 5 Roll/s Tape, Electrical, Waterproof, 600v 111 29 Set/s Recessed Ground Lamps, Ip67 1w, Ac85-265v Dc 12v (1 Side), Natural White (4000k), 42mm X 70mm 113 8 Set/s Metal Hallide Flood Light Fixture 250w Set With Tubular Metal Hallide Bulb (firefly), Warm White, Model: Flh 121/s/250/fhimh 250dl/t 114 10 Set/s Solar Blinker Arrow Signage Warning Lights, Direction Signs, Size: Length:47"; Height:42", Arrow Sign, Size: Length: 47"; Height:16", Solar Panel Size: 10" X7", Led Color: Red, Ip Grade: Ip54 119 18 Set/s Lamp Post, Steel Tapered, Single Arm,t-6-30' Sb Bracket Type, W/ Base Plate, Anchor Bolt, Nut & Washer, Electroplated Silver Finish, Amco 120 6 Set/s Lamp Post, Steel Tapered, Double Arm, T-6-30' Db Double Arm, Bracket Type, W/ Base Plate, Anchor Bolt, Nut & Washer, Electroplated Silver Finish 122 32 Pc/s Led Fountain Lights, Rgb With Stainless Steel Toughed Glass Cover, Ac 220; Dc 12-24v Dmx 512 Built In Control With Decoder, 9x3w Led Rgb Color Changing 2700-6500k Ip68 Water Proof Grade Junction Box 124 5 Roll Cable Wire; 5c X 16 Twg/1.025mm Premium Multi-conductor Royal Cable Wire (75m/roll) 126 32 Set/s Fountain Nozzle, 1.0" Dn40 Female Thread Flower Column Style Fountain Nozzle Sprinkler Spray Head, Brass 127 1 Unit/s 37.5 Kva Ditribution Transformer, 7620/13200vy - 240/480 Volts Oisc, W/ 2-2½, Taps Above And N.v., Fuse Link, Fuse Cut-out And Accessories 128 2 Meter/s Fuse, Cut-out, 100a, 25kv, Ab Chance 129 1 Set/s Transformer Cluster Hanger, With Complete Accessories 130 1 Pc/s Clamp, Hot Line, #2 - #4/0 Acsr 131 3 Set/s Pull Box, Metal Enclosure, 900mm X 200mm X 150mm, With Cover 132 50 Pc/s Screw, Lag Screw, 10mm Dia X 50mm, W/ Plain Washer And Expansion Shield 133 200 Pc/s Bolt With Nut And Washer, (fine Thread) 3.5mm Dia X 25mm 134 200 Pc/s Bolt With Nut And Washer, (fine Thread) 4.5mm Dia X 25mm 135 5 Pack/s Ubolt Galvanized/ U Bolt With Nut And Washer Inches For Gi Pipe Screw Depot, 1/4 For 3", 1/4" Dia, 10 Pcs Per Pack 139 30 Gal/s Concrete Epoxy, With Low Viscosity For Construction 140 22 Length/s Pipe, Upvc, 20mm Outside Dia, Wt=1.8min, L=3.0m, Blue 141 12 Pc/s Tee, Upvc, 20mm Inside Dia, Blue 142 14 Pc/s Elbow, Upvc, 20mm Inside Dia X 90 Deg. Bend, Plain, Blue 143 4 Pc/s Tee Reducer, Upvc,32mm X 20mm Nominal Dia, Blue 144 3 Pc/s Tee, Upvc, 25mm Inside Dia, Plain, Blue 145 4 Pc/s Adaptor, Upvc, Male, 20mm Dia., Nominal Size, Blue 146 8 Pc/s Adaptor, Upvc, Female, 20mm Dia Nominal Size, Blue 147 4 Pc/s Ball Valve, Pvc, 20mm Outside Dia 148 10 Length/s Pipe, Upvc, 32mm Outside Dia, Wt=2.0min, L=3.0m, Blue 149 1 Pc/s Gate Valve, 25mm Dia, Brass/bronze 150 1 Pc/s Check Valve, 25mm Dia, Brass/bronze 151 2 Pc/s Adaptor, Upvc, Male, 25mm Dia., Nominal Size, Blue 152 8 Length/s Pipe, Upvc, 50mm Outside Dia, Wt=2.30min, L=3.0m, Blue 153 2 Pc/s Elbow, Upvc, 50mm Outside Dia X 90 Deg. Bend, Plain, Blue 154 2 Pc/s Elbow, Upvc, 50mm Outside Dia X 45 Deg. Bend, Plain, Blue 155 2 Pc/s Adaptor, Upvc, Female, 50mm Outside Dia., Blue 156 3 Pc/s Gate Valve, 40mm Dia, Brass/bronze 157 5 Pc/s Check Valve, Horizontal Swing 40mm Dia, Brass/bronze 158 6 Length/s Pipe, Upvc, 50mm Outside Dia, Wt=2.30min, L=3.0m, Blue 159 2 Pc/s Tee, Upvc, 32mm Inside Dia, Blue 160 2 Pc/s Adaptor, Upvc, Female, 50mm Outside Dia., Blue 161 4 Pc/s Elbow, Upvc, 50mm Outside Dia X 90 Deg. Bend, Plain, Blue 162 2 Pc/s Elbow, Upvc, 50mm Outside Dia X 45 Deg. Bend, Plain, Blue 163 4 Length/s Pipe, Pvc, 57.15mm Outside Dia X T=2.54mm X L=3.0m, S-1000, Orange 164 2 Pc/s Elbow, Pvc, 57.15mm Inside Dia X 90 Deg. Bend, S-1000, Orange 165 2 Pc/s Elbow, Pvc, 57.15mm Inside Dia X 45deg Bend, S-1000, Orange 166 8 Length/s Pipe, Pvc, 82.55mm Outside Dia X T=3.75mm X L=3.0m, S-1000, Orange 167 2 Pc/s Pvc Tee, Inside Dia: 82.55mm, S-1000, Orange 168 2 Pc/s Floor Drain, 150mm X 150mm Dia, Stainless 169 8 Length/s Pipe, Pvc, 107.10mm Outside Dia X T=3.81mm X L=3.0m, S-1000, Orange 170 2 Pc/s Elbow, Pvc, 107.10mm Inside Dia X 90 Deg. Bend, S-1000, Orange 171 2 Pc/s Pvc Elbow, Inside Dia: 107.10mm X 45 Deg Bend, S-1000, Orange 172 1 Pc/s Gate Valve, 100mm Dia, Brass/bronze 173 1 Pc/s Gate Valve, 80mm Dia, Brass/bronze, Threaded Type 174 3322.536611 Sq.ft. Brass Metal Etching Engraved Marker 175 5 Pc/s Hat, Hard, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, Brown 176 20 Pc/s Hat, Hard, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, Yellow 177 20 Pc/s Vest, Reflectorized, Safety, Orange 178 20 Pair/s Raincoat, Jacket W/ Hood & Pants, Size: X-large With Reflectorized Strips 179 15 Pc/s Plastic Road Barriers 180 20 Pc/s Spectacles, Safety Goggles, Clear 181 8 Pair/s Gloves, Welding Leathear Long, 16', Ce Certified En 12477 182 5 Roll/s Caution Tape, Yellow, 3" X 50' 183 5 Roll/s Danger Tape, Red, 3" X 50' 184 15 Pc/s Traffic Cones 28" Tall, 14" X 14" Base With Reflective Collars Lot No. Vi Road Stud Installation 137 1 Set/s Solar Road Stud Installation Machine, Equipped With Running Wheel, Accurate Hole Position With Good Hole Forming Quality, 5.0hp, 220v With 3900w 50/60hz, 570rmp; Height: 800mm; Weight: 200kgs; Pure Copper Self-priming Pump, Manual Electric Starter, Free Adjustment Depth And Bearing Seat Assembly Complete With Coring Bit And Other Accessories ** ** ** Nothing Follows ** ** ** Bid Documents Shall Be Available At The Bac Office, New City Hall, Lgu Bayawan City Upon Payment Of Prescribed Non-refundable Fee In The Amount Of Php 5,000.00 Bidders Shall Drop Their Technical And Financial Proposals In The Bid Box At The Bac Office, Bayawan City On Or Before The Deadline Of Submission Of Bids As Shown Below. All Particulars Relative To Eligibility Process, Opening And Evaluation Of Bids, Postqualification And Award Of Contract Shall Be Governed By The Applicable Provisions Of Ra. 9184. The City Of Bayawan Reserves The Right To Reject Any Or All Bids, To Waive Any Defects Or Formality Therein And To Accept Bids Considered Responsive And Most Advantageous To The Government. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule Issuance Of Bid Documents December 17, 2024 To January 6, 2025 @ 5:00 Pm Pre-bid Conference December 26, 2024 @ 9:00 Am Deadline/opeing Of Bids January 7, 2025 @ 9:00 Am Post Qualification January 14, 2025 @ 9:00 Am Awarding Of Bids January 21, 2025 @ 9:00 Am Approved: (sgd)virginia D. Sadiasa City Civil Registrar Bac Chairman Received By: Name:___________________________ Date:___________________________ Geps Publication : Geps December 17, 2024 Newspaper : None
Closing Date7 Jan 2025
Tender AmountPHP 2.1 Million (USD 37.8 K)
PEA TOLLWAY CORPORATION Tender
Electronics Equipment...+1Electrical and Electronics
Philippines
Details: Description Beyond •mic: Built-in •output Format: Mjpeg Or More •frame Rate: 30fps Or Higher •usb: 2.0 Or More •quantity: 5 Units •warranty: 1 Year Or More 2. Hdmi Cable •type: Standard Hdmi Male (male To Male) •version: 2.0 Hdmi Cable •supports: Video/audio •resolution: 1080p 60hz Or Higher •length: 10 Meters Or Longer •compatibility: Hd Tvs, Hdmi Devices •warranty: 30 Days Replacement Factory Defect Or More 3. Teleconference Device With Expansion •microphone And Peripheral Equipment Equivalent Or Higher Technology •microphone: Integrated Microphone With 3 Beamforming Elements •microphone Pickup Range: 4 M •expansion Microphone: 5 M •microphone Frequency Response: 90hz-16khz For Full Voice Reproduction And High Intelligibility Without Noise And More •speaker: Volume Adjustable To 95 Db Spl At ½ Meter Peak Or More •operating System Compatibility: Windows 10, Windows® 11 Or Later, Macos (two Most Recent Versions) •compatibility And Integrations: Plug-and-play Usb, Microsoft Applications And More •package Contents: Expansion Microphone And Peripherals Equipment, Conference Cam, Remote Control, Usb 2.0 Minimum Of 5 M, Power Supply, Wall Mount And Hardware, User Documents •warranty: 1 Year Or More Hardware Replacement And Support 4. Projector With Projection Screen •projector: 5,000 Lumens Or Greater •projection Method: Digital Light Processing (dlp) Or Higher Technology •maximum Resolution: 1920x1200 Dpi Or Greater •projection Screen: Standard Screen Size With Bracket Stand Tripod For Projector •warranty: 1 Year Or More 5. External Hard Drive Storage •type: Plug And Play, Portable Solid-state Drive (ssd) Storage •capacity: 8 Tb Or More •port: Usb •compatibility: Desktop, Laptop, And Server •warranty: 1 Year Or More 6. Internal Ssd •type: Sata Solid-state Drive (ssd) Storage •capacity: 512gb Or Greater •warranty: 1 Year Or More 7. Dual Bay Dock Station With Power Adapter •type: Plug And Play •supports: Offline Clone Function, Hot Swap •connections: Dual Bay •dock Access: 2 Drives Simultaneously (up To 2x16 Tb) •light Indicator: Power And Activity Status •data File Transfer: Super Speed Usb 3.0 (5gbps/420mb/s Or More), Downward Compatible With Usb 2.0/1.1 •compatibility: Hard Disk Drive (hdds) / Solid-state Drives (ssds) •port: Usb, Power Adapter •included In The Box: 1 X Usb-b To Usb-a Cable, 1 X Power Adapter 12v/3a, 1 X Usb-a To Usb-c Adapter, 1 X Quick Start Guide Or More •warranty: 1 Year Or More 8. Labeler •keyboard: Qwerty •display: Larger Lcd •features And Benefits: •large 13-character Display Or More With Print •preview For Editing Label Before Printing •exclusive Graphical Display Lets You To •see Font Effects On Screen Before You Print •navigation Buttons For Easy Access To •advanced Features •9 Label Memory Or Greater, Minimum Of 2-line Printing, 5 Font Sizes Or More, 8 Box Styles And Underline Or More, 7 Print Styles Or More, Auto-off Power Saver, Date Function, English Language Or More •inclusion: Batteries And Ac Adapter •paper Size Output: ½” X 13’ | 12mm X 4m 9. Labeler Paper •white Labeler Paper Size: ½” X 13’ | 12mm X 4m •usage: Fully Compatible With The Labeler Ordered As Is •1 Year Or More 10. Heavy Duty Gun Tacker •power: High/low Switch •length: 14mm Or Greater 11. External Hard Drive Storage •plug And Play, Portable Solid-state Drive (ssd) Storage •capacity: 1 Tb Or More •port: Usb •compatibility: Desktop, Laptop, And Server •warranty: 1 Year Or More 12. Cordless Electric Screwdriver •type: Brushless Cordless Impact Drill 29 Pieces Cordless Electric Impact Battery Drill Screwdriver Set Woodworking, All Metal Chuck, 1/2” All Metal Keyless Ratcheting Chuck •speed: 0-350/0-1350r/min •torque:18-80n.m •collet: 10mm (with Shaft Lock, Collet With Self-lock) •motor: Brushless Motor •voltage: Dc 20v •three Working Modes: Impact, Flat Drilling, Screw Turning •lighting: Automatic On When Electric Drill Is Working •battery Core Type: Li-ion (lithium-ion) •drill Type: Hammer Drill •gears: 20 Or More •patterns: 3 (screwdriver, Drill, Impact Mode) •switch: 2 Speed One Click High And Low, High Gear For Drilling Or Grinding, Low Gear For Disassembly And Assembly Of Screws •rotation: Clockwise And Counterclockwise, Forward And Reverse Switching •power Tool Feature: Waterproof, Led Light, Bag Included, Brushless, Case Included, Keyless Chuck, Mobile App Integration •tool Compatible With Surfaces: Plastic, Glass, Ceramic, Masonry, Wood, Metal, Drywall •package Include: 1 X Cordless Electric Drill (not Including Battery), 2 X Lithium-ion Battery, 25 X Drill/driver Bit, 1 X Suitcase (tool Box), 1 X English User Manual •spare Battery: 1 X Lithium-ion Battery •warranty: Minimum Of 1 Year Hardware Replacement Or More
Closing Date14 Jan 2025
Tender AmountPHP 321.5 K (USD 5.5 K)
Municipality Of Bobon, Northern Samar Tender
Others
Philippines
Details: Description Republic Of The Philippines Municipality Of Bobon Province Of Northern Samar -oo0oo- Bids And Awards Committee Invitation To Apply For Eligibility And To Bid The Municipal Government Of Bobon, Northern Samar Through Its Bids And Awards Committee (bac) Invites Contractors/suppliers To Apply For Eligibility And To Bid For Purchased Of Office Equipment To Be Used In The Various Offices In Lgu-bobon, Bobon, Northern Samar; Item No. Quantity Unit Item/description 1 1 Set Desktop Co Mputer Pentium 2 2 Units Brother T720dw Printer 3 1 Unit Ups 1500va 4 1 Unit Avr 1000va 5 1 Unit 5kva Avr 6 1 Unit Dahua Interactive Whiteboard 65’’ 7 2 Unit Swivel Chair Js-131 8 5 Unit Steel Cabinet 4 Layers 9 2 Unit Desktop Computer Core I5 10 4 Unit External Hard Drive 1tb 11 10 Pcs Flash Drive 65gb 12 2 Unit Steel Cabinet 4 Drawer 13 6 Pcs Stand Fan 14 2 Unit Window Type 2hp Inverter 15 2 Unit Wavlink Wifi 6 Ax1800m Dual Band 16 1 Unit Haier Window Type 2hp 17 1 Unit Olympia Typewriter 18 1 Roll Isecure Stp Cable Cat6 19 1 Pc Crimpimg Tool 20 5 Pcs 1 To 2 Way Lan Rj45 Port 21 20 20 Pcs Rj45 Connector 22 1 Unit Acer Phn16-71-78y5 Laptop Predator 23 6 Unit Mgk Ups 650va 24 6 Pcs Gold Power Avr 500w 25 1 Set Kevler Speaker 15’’ 1000w Speaker Stand Kevler Amplifier Kevler Wireless Mic 30 Meter Speaker Wire 26 2 Sets Desktop Computer Core I3 W/ Printer 27 1 Unit Haier Aircon Window Type 1.5hp 28 2 Sets Desktop Computer Core I5 29 1 Unit Acer Laptop Core I3 30 2 Unit Epson L3210 Printer 31 1 Set Cpu Only Core I3 32 1 Unit Apacer 1tb Ssd 33 1 Unit Bps 150 Digital Duplicator Machine 34 6 Rolls Master Roll For Bps 35 10 Carts Bps 150 Ink 36 1 Set Desktop Computer Core I3 W/ Printer 37 4 Unit Computer Set (ryzen 5 5600g 16 Gb Ram, 512gb Ssd) 38 4 Unit Laptop (acer Aspire 3 Silver 15.6n Ryzen 5 7520) 39 2 Unit Brother Dcp-t720dw 40 1 Pc Small Vacuum Cleaner Portable 41 10 Pcs Blue Print Solution: Digital Bps-150 Duplicator Ink (bps-413s C-4 Ink) 42 6 Pcs Ups (awp Aid 1000 Pro) 43 1 Box Utp Cable (cat 6 Ethernet Cable Outdoor Waterproof 1000 Mbps 300 Meters) 44 1 Pc Switch Hub (tp-link Ti-sg 1016d 16-port) 45 50 Pcs Rj45 Cat7 Passthrough 46 1 Pcs External Hard Drive 1tb Ssd 47 3 Pcs Flash Drive 64gb 48 1 Mtrs Hdmi Cable 5 Meters 49 3 License Microsoft 365 Family License 50 2 Unit Brother T720dw Printer 51 1 Unit Epson L5290 Printer Approved Budget For The Contract (abc)------->php 2,264,700.00 Eligibility Forms And To Bid Documents May Be Secured At The Office Of The Bac Chairman During Office Hours From 8:00 Am To 5:00 Pm Upon Payment Of Five Thousand Pesos (php 5,000.00) Only To The Office Of The Municipal Treasurer. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bid Conference, Evaluation Of Bids, Post Qualification, And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 As Well As The Preliminary Examination Of Bids Shall Use Non-discretionary “pass”/“fail” Criteria. Post Qualification Of The Lowest Calculated Bid Shall Be Conducted. Schedule Of Activities: Issuance Of Bidding Documents-------------> December 27, 2024 – January 16, 2025, 8:00 Am-5:00 Pm (office Hour) Pre-bid Conference ---------------------------> January 06, 2025; 9:00 Am-bac Office, Bobon, Northern Samar Submission And Opening Of Bids------------> January 16, 2025; 9:00 Am-bac Office, Bobon, Northern Samar Bid Evaluation---------------------------------> January 17, 2025; 9:00 Am-bac Office, Bobon, Northern Samar Post Qualification-----------------------------> January 20, 2025 Approval Of Resolution/issuance Of Noa > January 21, 2025 Contract Preparation And Signing-----------> January 22, 2025 Issuance Of Notice To Proceed---------------> January 23, 2025 The Municipality Of Bobon Through The Office Of The Bac Reserves The Right To Reject Any Or All Other Bids, Waive Any Minor Defect Therein And Accept The Offer Most Advantageous To The Local Government Of Bobon, Northern Samar. Also, The Municipality Of Bobon Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of The Bid. Engr. Luncio N. Ramos Bac Chairman-bids And Awards Committee Date: December 27, 2024
Closing Date16 Jan 2025
Tender AmountPHP 2.2 Million (USD 38.7 K)
481-490 of 525 archived Tenders