Waterproofing Tenders

Details: Description Davao City Catering Services Inclusions: Packed Lunch & 2 Snacks With Drinks Lunch: Rice, 3 Viands (2 Meat/fish And Noodles/vegetables), Dessert And Drinks Menu Choices: Grilled Tuna Belly, Fish Tinola, Pancit Guisado, Bihon Guisado, Bam-i, Tuna Sweet N' Sour, Chopsuey, Beef Kaldereta, Beef Afritada, Buttered Chicken, Chicken Asado With Pineapple, Native Chicken Tinola, And Chicken Caldereta. Dessert Menu: Buko Pandan, Fruit Salad, Minatamis Na Saging, Brownies, And Cake. Snacks: Am And Pm With Drinks Snack Choices: Kakanin, Beef Or Chicken Burger, Pancit With Bread, Bihon With Bread, Spaghetti With Bread, Tuna Sandwich, Chicken Sandwich, Biko With Sikwate, And Chicken Siopao Drinks: Juice In Can, Softdrinks (individual Bottle) "special Instructions: Non-pork, No Cream Dory, With Free Flowing Drinking Water And Choice Of Coffee/chocolate Drinks, Free Delivery At The Venue." Hands-on Training On The Culture, Management And Feed Formulation For Freshwater/marine Fisheries 1 Lot ₱43,200.00 1 Meal & 2 Snacks Per Day For 3 Days Venue: Cfo, Davao City 24 Pax Date: March 2025 Hands-on Training On The Post-harvest Technology Of Various Fish And Fisheries Products 1 Lot ₱48,000.00 1 Meal & 2 Snacks Per Day Venue: Cfo, Davao City Date: March 2025 (batch 1) (2days) 20 Pax Date: March 2025 (batch 2) (2days) 20 Pax Fisheries Technician' Forum/meeting 1 Lot ₱27,600.00 1 Meal & 2 Snacks Per Meeting (1 Day Per Meeting) Venue: Cfo, Davao City Date: February 2025 (1st Sem) 23 Pax Date: October 2025 (2nd Sem) 23 Pax Training On Organizational Building And Strengthening For Fisherfolk Organizations 1 Lot ₱25,200.00 1 Meal & 2 Snacks Per Day For 2 Days Venue: Cfo, Davao City 21 Pax Date: March 2025 Training On Iuu Fishing Index And Threat Assessment Tool 1 Lot ₱45,000.00 1 Meal & 2 Snacks Per Day For 3 Days Venue: Cfo, Davao City 25 Pax Date: June 2025 Post-harvest Training Materials And Ingredients Post-harvest Materials And Ingredients 1 Lot ₱18,700.00 Fresh Milkfish (4pcs/kilo) 15 Kgs Fresh Milkfish, Sardines Size (6pcs/kilo) 15 Kgs Fresh Tilapia (4pcs/kilo) 15 Kgs Corn Oil 8 Liters Cooking Oil 3 Gal Iodized Salt (1 Kilo/pack) 1 Packs Table Salt, Coarse (1 Kilo/pack) 2 Packs Pepper, Powder (250 G/pack) 3 Packs Laurel Leaves (250 G/pack) 5 Packs Pepper, Seeds (50 G/pack) 2 Packs Bread Crumbs (500 G/pack) 3 Packs Flour, 1st Class (1 Kilo/pack) 3 Packs Butter (75 G/piece) 3 Pcs Sugar, White (1 Kilo/pack) 3 Packs Sugar, Brown (1 Kilo/pack) 5 Packs Sugar, Confectioner (1 Kilo/pack) 3 Packs Vinegar (1.893 Liters/gallon) 3 Gal Soy Sauce (1.893 Liters/gallon) 3 Gal Vanilla, (60 Ml/bottle) 3 Bot Calamansi, Medium Size 1 Kilo Garlic, Medium Size 2 Kilo Onions, Medium Size 2 Kilo Ginger, Medium Size 1 Kilo Carrots, Medium Size 1 Kilo Hairnets, Black 50 Pcs Apron, White, Waterproof 50 Pcs Disposable Plastic Gloves, Food Grade (100 Pcs/box) 4 Boxes Disposable Surgical Mask (50 Pcs/box) 4 Boxes Hand Towel, White, 16" X 28"-30" 2 Doz Agricultural Inputs Agricultural Supplies For The Hands-on Training On Feed Formulation 1 Lot ₱6,000.00 Fish Meal 7 Kgs Copra Meal 15 Kgs Rice Bran (tiki-tiki) 20 Kgs Flour 25 Kgs Cornstarch 5 Kgs Vitamins And Minerals (for Animals) 1kg/container 2 Containers Training Materials Training Materials For Cfo-davao City 1 Lot ₱24,300.00 Ballpen (good Quality, Fine, 0.5), Black 40 Pcs Ballpen (good Quality, Fine, 0.5), Blue 40 Pcs Signpen, Gel Rolling Ball Pen, .8 Fine Point, Blue 30 Pcs Calculator, 12 Digits, With Time Calculation (h/m/s), Solar And Battery Powered 1 Unit Stapler With Staple Remover, Hd 50f 2 Unit Toilet Paper, 3 Ply 100mmx90mm 50 Rolls Book Paper,a4, Subs.20 20 Ream Bond Paper, Colored, Yellow (a4) S. 18 5 Ream Bond Paper, Colored, Blue (a4) S. 18 5 Ream Record Book, 200 Pages, Size 241mmx278mm 1 Pc Record Book, 150 Pages, Size 241mmx278mm 1 Pc Flannel Dust Cloth 12" X 18" (set Of 6) Multi-purpose Towel For Cleaning & Polishing 3 Pcs Walis Ting Ting 2 Pcs Dishwashing Liquid (antibacterial), 500ml 6 Bot Hand Liquid Soap, 500ml Scented, Antibacterial 4 Bot Masking Tape 3" (thick) 4 Pcs Detergent Powder 1 Kg./pack 1 Kg File Desk Organizer ( 3- 4 Layer ) 3 Unit Garbage Bag, Small, Approx. 18"x20", Black 10 Pcs./pack 15 Pack Alcohol, Isophrophyl 70% Big 500ml 30 Bot File Storage Box With Cover ( For Long And Legal Size Paper Folder ) 6 Pcs Plastic Dust Pan 2 Pcs Tape Dispenser 2 Pcs Stamp Pad No. 2 (violet) 4 Pcs Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Nothing Follows Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Purpose: For Official Use Of City Fisheries Office Of Davao City

Details: Description Request For Quotation Sir/madam: Please Quote Your Government Price/s Including Delivery Charges, Vat Or Other Applicable Taxes, And Other Incidental Expenses For The Goods Listed In Annex A. Failure To Indicate Information Could Be Basis For Non - Compliance. Also, Furnish Us With Descriptive Brochures, Catalogues, Literatures And/or Samples, If Applicable. If You Are The Exclusive Manufacturer, Distributor Or Agent In The Philippines For The Goods Listed In Annex A Please Attach In Your Quotation A Duly Notarized Certification To This Effect. Please Accomplish And Submit This Form Together With Annex A; Philgeps Certificate / Registration Number; Valid 2025 Mayor's Permit Or Business Permit; And Notarized Omnibus Sworn Statement (oss) To Council For The Welfare Of Children C/o Bac Secretariat At #10 Apo St., Santa Mesa Heights, Quezon City 1114 Metro Manila Or Email It To Bac@cwc.gov.ph Cc: Cwcbac@gmail.com On Or Before 12 February 2025, 10:00 A.m. Very Truly Yours, (original Signed) Jovertlee C. Pudan, Enp Bac Chairperson Terms And Conditions: 1. Award Shall Be Made On Per: Item/lot Basis X Total Quoted Price. 2. Quotation Validity Shall Not Be Less Than Thirty (30) Days. 3. Good/s Shall Be Delivered Within Please See Annex A 4. Place Of Delivery: Please See Annex A 5. Terms Of Payment: Within 15-30 Days Upon Final Inspection And Acceptance. 6. Liquidated Damages/penalty: (1/10) Of One Percent For Everyday Of Delay Shall Be Imposed. 7. Indicate Brand, Model And Country Of Origin. 8. In Case Of Discrepancy Between Unit Cost And Total Cost, Unit Cost Shall Prevail. 9. Disclosure Of Relations: The Original And Notarized Omnibus Sworn Statement Shall Be Submitted By The Winning Bidder Within Ten (10) Calendar Days After Conforme Of Notice Of Award (noa) 10. Warranty: The Winning Bidder Shall Post A Warranty Security Equivalent To 5% Of The Total Contract Price Through Cash Payment Or Bank Guarantee, Within Ten (10) Calendar Days After Conforme Of Notice Of Award (noa). Said Warranty Security Shall Be Released Three (3) Months After The Final Acceptance Of Delivered Goods/ Services By The Council For The Welfare Of Children =========== Procurement Of Service Provider For The Printing Of Iec/ Advocacy Materials For The Various Lid Activities For Fy 2025 1. 500 Pc "ta Customized Notebook Dimensions: 8.5 X 6 Inches (a5 Spread Size) Leaves/ Pages: 40 Leaves/ 80 Pages (including Cover) Paper Type: Cover - C2s 220 Matte Lamination; Inside Pages - Book #70, Uncoated Print: Cover - Full Color, 2 Sides; Inside Pages - Full Color (4 Leaves), Black And White (56 Leaves) Binding: Double Loop Wire Abc: ₱58,000.00" 2. 500 Pc "ta Customized Ballpoint Pen Color: White/ Blue Material: Plastic With Wide Clip Mechanism: Twist Refill Color: Black With Logo Printed On The Clip Printing: Uv Digital Abc: ₱20,589.00" 3. 500 Pc "ta Customized Expandable Eco/ Tote Bag Material: Canvas Fabric Size: 14"" X 16"" (l*w); 3.5"" (base); 9.4"" (band) Color: Beige (300pcs) And Black (200pcs) Print: A4 Customized Print, Transfer Print/ Silkscreen/dtf Abc: ₱85,000.00" 4. 175 Pc "lcpc Toolkit* Material: A4 (210 X 297 Mm) 250pages Including Cover Cover: 220-250 Gsm, C1s, Glossy, Full Color Inner Pages: 80-90 Gsm, Glossy, Full Color Binding: Perfect Bound Abc: ₱87,500.00" 5. 150 Pc "consortium Customized Pocket Notebook* Size: 127x178mm Number Of Inside Pages: 50 Sheets In 80 Gsm Front And Back Cover Pages: 120gsm, Two Sides Full-color, With Lamination On One Side (outer Cover Pages) Binding: Perfect Bind Abc: ₱9,000.00" 6 53 Pc "consortium Customized Tumbler* Printing: Multi-color Logo Packaging: Nylon Pouch Powder Coating Tumbler Skinny Straight, 20oz Coffee Stainless Steel Tumbler With Lid And Metal Straw Color White With Print Abc: ₱26,500.00" 7 50 Pc "consortium Customized Umbrella* Automatic Folding Uv Umbrella Umbrella Size: 38 Inches Width Material Material: Black Thick Fiber Ribs Waterproof With Black Uv Protect Backing Handle: Black Rod, Auto-open And Auto-close Logo Umbrella Color: White Abc: ₱15,000.00" 8 150 Pc "consortium Customized Expandable Tote Bag* Material: Canvas Fabric Size: 14"" X 16"" (l*w); 3.5"" (base); 9.4"" (band) Color: Black (150pcs) Expandable Print: A4 Customized Print, Transfer Print/silkscreen/dtf Abc: ₱45,000.00" Note: For Item Numbers 1-3 - Tentative Delivery Date: 28-february 2025 Or Within 30 Calendar Days After Conforme Of Po (see Attached Design For Reference) Note: For Item Number 4 - Printing Will Commence Once The Final Layout Has Been Approved On Or Before 31 March 2025, And Target Or Tentative Delivery Date Is On Or Before 30 April 2025. Design/ Layout C/o End User Note: For Item Numbers 5-8 - Printing Will Commence Once The Final Layout Has Been Approved On Or Before 31 March 2025; May To June 2025 Is The Target Printing Date; And June To July 2025 Is The Target Or Tentative Delivery Date. Design/ Layout C/o End User Place Of Delivery: Lid C/o Council For The Welfare Of Children, No. 10 Apo St., Santa Mesa Heights, Quezon City Contract Person: Ms. Erica Paywan-florendo (lid) - 09760271588 *************nothing Follows************* Approved Budget Ceiling: ₱346,589.00 Charged To: Lid Regular Funds

Details: Description 47 Sets Customized Coffee Grinder Set Packed In Approx. 25x25x10cm Black Corrugated Box With Shredded Paper And 1mx1.5" Silver Ribbon 1,000.00 47,000.00 Inclusions: Coffee Press, At Least 350ml, With Doh, Doh-ttrc And Bagong Pilipinas Logo, With Custom Design Vinyl Sticker - 60th Founding Anniversary Design Coffee Grinder, Atleast 12g Capacity, With Doh, Doh-ttrc And Bagong Pilipinas Logo, With Custom Design Vinyl Sticker - 60th Founding Anniversary Design Mug, Black, Approx. 3.2 X 3.7 Inches, With Doh, Doh-ttrc And Bagong Pilipinas Logo, With 60th Founding Anniversary Design Coaster, Wooden, Round, 4x4", With Engraved Doh-ttrc Logo Stirrer Spoon, Stainless, 0.7 Inch (w) X 5.5 Inches (l) 400 Pcs Brochures, Trifold, 2-side Printing, Colored, Glossy Paper At Least 120gsm 50.00 20,000.00 50 Pcs Poster, Portrait, Full-color, C2s 180lbs Board Glossy, Plastic Lamination 247.00 12,350.00 12 Sets Bamboo Notebook, With Logo, With Name Laser Engraved, A5, Hard Cover, Cream Page Color, Quared Page Edges, At Least 80 Leaves, Lined Page Design, Approx. 155mmx210mmx 14mm 550.00 6,600.00 185 Pcs Bucket Hat, Cotton Twill Fabric With Flat Custom Embroidery, Reversible, At Least 10cm Depth, Purple And Black 275.00 50,875.00 20 Pcs Sablay, With Custom Print, Ethnic Design, Color Green, Matty Fabric, At Least 1.7m Long, At Least 10cm Wide 418.00 8,360.00 50 Pcs Ref Magnet, With Custom Print, High Quality 1mm Full Magnetic Sheet, Waterproof, Approx. 2.25 X 3.9", Individually Wrapped With Tag 30.00 1,500.00 149 Pcs Mug, With Custom Print, Ceramic, White, Individually Wrap In Clear Plastic With Ribbon 77.00 11,473.00 125 Pcs Mug, With Drug Advocacy Custom Print, Ceramic, With Anti-fade Coating, White, At Least 10" Dia., At Least 3.75" In Height 93.00 11,625.00 100 Pcs Umbrella, With Drug Advocacy Custom Print, Non-folding, Black 209.00 20,900.00 250 Pcs Notebook, With Drug Advocacy Custom Print, A5, Hard Bound, At Least 80gsm, At Least 80 Sheets 110.00 27,500.00 250 Pcs Ballpen, With Drug Advocacy Custom Print, Retractable, Black Ink 38.00 9,500.00 100 Pcs Tote Bag, With Drug Advocacy Custom Print, Canvas, White, At Least 15.5" Height, At Least 13.5" Width, At Least 4" Base, With At Least 27" Strap, With At Least 5"x5" Pocket In Front 143.00 14,300.00 110 Pcs Medal, With Various Custom Print, Acrylic, Round, At Least 2.5" Dia., 1.5mm Thick, With Lanyard In Gold, Silver And Bronze Color 110.00 12,100.00 1 Pcs Trophy, With Various Custom Print And Design, Acrylic, At Least 15" In Height, At Least 1/4 Thickness Body, With Wood Base With Print, Approx. L: 17cm X W: 6.25cm X H: 5 Cm 1,500.00 1,500.00 9 Pcs Trophy, With Various Custom Print And Design, Acrylic, At Least 9" In Height, At Least 1/4 Thickness Body, With Wood Base With Print, Approx. L: 15.25cm X W: 6.25cm X H: 4.5 Cm 850.00 7,650.00 16 Pcs Trophy, With Various Custom Print And Design, Acrylic, At Least 7" In Height, At Least 1/4 Thickness Body, With Wood Base With Print, Approx. L: 10cm X W: 6.25cm X H: 4.25 Cm 600.00 9,600.00 7 Pcs Trophy, With Various Custom Print And Design, Acrylic, At Least 5" In Height, At Least 1/4 Thickness Body, With Wood Base With Print, Approx. L: 8.5cm X W: 6.25cm X H: 4.25 Cm 450.00 3,150.00 150 Pcs T-shirt, With Custom Print In Front, Drifit, Round Neck, White, Xl 275.00 41,250.00 150 Pcs T-shirt, With Custom Print In Front, Premium, Cotton, Round Neck, White, Sizes: Xs-4; S-27; M-34; L-45; Xl-23; 2xl-8; 3xl-8; 4xl-1 275.00 41,250.00 45 Pcs T-shirt, With Custom Print, Drifit, Round Neck, Light Brown, Sizes: S-4; M-10; L-19; Xl-6; 2xl-5; 3xl-1 275.00 12,375.00 290 Pcs T-shirt, With Custom Print, Drifit, Collared With Button, Full Sublimation, Unisex, Sizes: Xs-6 S-40; M-45; L-99; Xl-71; 2xl-19; 3xl-7; 4xl-3 500.00 145,000.00 38 Pcs T-shirt, With Custom Print, Spandex Materials, With Cotton Collar, With Button, Full Sublimation, Sizes: Xs-1; S-2; M-18; L-9; Xl-7; 3xl-1 440.00 16,720.00 80 Pcs T-shirt, Cotton Blend, 50% Polyester, 50%cotton, Round Neck, Light Blue, Sizes: L-20;, Xl-40; 2xl-20 150.00 12,000.00 30 Pcs T-shirt, Cotton Blend, 50% Polyester, 50%cotton, Round Neck, White, Sizes: L-10;, Xl-10; 2xl-10 150.00 4,500.00 20 Pcs T-shirt, Cotton Blend, 50% Polyester, 50%cotton, Round Neck, Pink, Sizes: L-6;, Xl-8; 2xl-6 150.00 3,000.00 Total: 552,078.00

Details: Description Office Supplies For 1st Semester For Official Use Of Denr Penro Cebu 60 Box Staple Wire #35 (5000 Staples) 12 Box Staple Wire # 23/13 (1000 Staples) 12 Box Fastener (plastic) 12 Box Fastener Long 8 1/2 Inches 70mm 6 Box Continous Carbon Less Paper, 3 Ply, Size: Letter 10 Box Permanent Marker, Black (broad), 12pcs Per Box 5 Box Permanent Marker, Black (fine), 12pcs Per Box 6 Box Ink Refill Color: Black 6 Box White Board Marker, Black, 12pcs Per Box 10 Box Sign Pen Liquid Gel .05 Black, 12pcs Per Box 7 Box Sign Pen Liquid Gel .05 Blue, 12pcs Per Box 9 Box Sign Pen Liquid Gel .07 Black, 12pcs Per Box 5 Box Sign Pen Liquid Gel .07 Blue, 12pcs Per Box 1 Box Sign Pen Liquid Gel .05 Green, 12pcs Per Box 3 Box Sign Pen Liquid Gel .05 Red, 12pcs Per Box 16 Box Ballpen, Black, 12pcs Per Box 5 Box Ballpen, Blue, 12pcs Per Box 7 Box Pencil With Eraser, 12pcs Per Box 31 Box Paper Clips 33mm 33 Box Paper Clips 50mm 5 Box All Purpose Rubber Band Flat 23 Box Clip, Backfold, 19mm, 12pcs Per Box 23 Box Clip, Backfold, 25mm, 12pcs Per Box 23 Box Clip, Backfold, 32mm, 12pcs Per Box 20 Rolls Duct Tape 2 Inches 48 Rolls Packaging Tape 2", Brown 40 Rolls Scotch Tape 2", Clear 44 Rolls Scotch Tape 1", Clear 26 Rolls Masking Tape 1" 28 Rolls Masking Tape 2" 18 Rolls Double Sided Tape 1" 20 Rolls Electrical Tape 3 Rolls Straw Twine (plastic Straw Rope) 4 Rolls Nylon Cord 6mm (craft Cord), 36yards 230 Reams Bond Paper, A4 Size, 20 Subs 270 Reams Bond Paper, Legal Size, 20 Subs 150 Reams Bond Paper, Letter Size, 20 Subs 100 Pieces Expanded Folder Green, Long (pressboard) 100 Pieces Expanded Envelope Brown, Long With Garter 100 Pieces Folder Long, Blue 100 Pieces Folder Long, Green 400 Pieces Folder Long, White 370 Pieces Folder Short, White 250 Pieces Folder Long, Brown 90 Pieces Envelope, Brown (short) 80 Pieces Correction Tape 48 Pieces Correction Pen 18 Pieces Stamp Pad Ink, Blue, 30ml 6 Pieces Puncher, Heavy Duty 40 Pieces Sticky Note Film Index With Sign Here 40 Pieces Sticky Note (102mm X 76mm), 100 Sheets 40 Pieces Sticky Note (76mm X 76mm), 100 Sheets 40 Pieces Sticky Note (19mmx 76mm), 100 Sheets 60 Pieces Spiral Notebook, 80 Pages (127x178mm) 50 Pieces Composition Notebook, 40 Pages 30 Pieces Engineers Fieldbook, Random Colors 28 Pieces Highlighter (yellow, Orange, Green) 6 Pieces Bookend Stand, Metal 5 Pieces Glue, 130grams 13 Pieces Scissors, Heavy Duty 16 Pieces Staple Remover, Plier Type 18 Pieces Stapler, Heavy Duty 7 Pieces Calculator, 12 Digit Display, Big Screen (desktop) 10 Pieces Ruler, 12 Inches 1 Pieces White Board, Size:80x120cm 12 Pieces Plastic Comb Binder Ring, 8mm 12 Pieces Plastic Comb Binder Ring, 10mm 12 Pieces Plastic Comb Binder Ring, 14mm 12 Pieces Plastic Comb Binder Ring, 18mm 12 Pieces Plastic Comb Binder Ring, 22mm 12 Pieces Plastic Comb Binder Ring, 28mm 12 Pieces Plastic Comb Binder Ring, 32mm 12 Pieces Plastic Comb Binder Ring, 38mm 12 Pieces Plastic Comb Binder Ring, 55mm 100 Pieces Certificate Holder (8.5 X11 Inches) Standard Size 2 Pieces Backpack (large Capacity, Color Black, Waterproof) 12 Pack Index Card (4x6), 100 Sheets Per Pack 11 Pack Photo Paper, Glossy, 20 Sheets Per Pack 12 Pack Battery Aaa, Heavy Duty 4pcs Per Pack 12 Pack Battery Aa, Heavy Duty 4pcs Per Pack 4 Pack Rechargeable Battery Aa, 4pcs Per Pack 10 Pack Vellum Paper, Short, 100 Sheets Per Pack 6 Pack Vellum Paper, Long, 100 Sheets Per Pack 5 Pack Carbon Film, Long, Blue Color, 100sheets Per Pack 5 Pack Carbon Film, Long, Black Color, 100sheets Per Pack 2 Pack Parchment Paper, Short , 50pcs Per Pack 2 Pack Sticker Paper, Matte A4, 100 Sheets Per Pack 1 Pack Pvc Cover 300mic, 100 Sheets Per Pack, Long 1 Pack Pvc Cover 300mic, 100 Sheets Per Pack, A4 6 Cart Epson Lx 300+ii Ribbon Cartridge (genuine) 3 Cart Epson Lq 310 Ribbon Cartridge (genuine) 50 Bottle Epson Ink 003, Black (genuine) 24 Bottle Epson Ink 003, Cyan (genuine) 24 Bottle Epson Ink 003, Magenta (genuine) 24 Bottle Epson Ink 003, Yellow (genuine) 80 Bottle Canon Ink 790, Black (genuine) 60 Bottle Canon Ink 790, Cyan (genuine) 60 Bottle Canon Ink 790, Magenta (genuine) 60 Bottle Canon Ink 790, Yellow (genuine) 3 Cartridge Hp Toner Cartridge 335a, Black (genuine) 8 Bottle Hp Ink 53, Black (genuine) 8 Bottle Hp Ink 52, Cyan (genuine) 8 Bottle Hp Ink 52, Magenta (genuine) 8 Bottle Hp Ink 52, Yellow (genuine)

Details: Description Please Quote Your Best Offer/proposal For The Item/s Listed Below: Supply And Delivery Of Customized Travel Organizer Specifications: Material: Oxford Cloth, Double-sided Twill, Waterproof Shape: Cube Color: Navy Blue/dark Blue Color Of The Zipper: Orange Quantity: 100 Sets Design, Dost And Nast Logo Will Be Provided By The Procuring Entity (pe) One Set Consists Of: 1. Underwear Bag With Handle And 2 Zippers Size: 28 X 20 X 11 Cm No Mesh With Printed Logo On One Side (in Front) 2. Small Clothes Bag With Handle And 2 Zippers Size: 30 X 22.5 X 12 Cm With Mesh With Printed Logo On One Side (at The Back) 3. Medium Clothes Bag With Handle And 2 Zippers Size: 32 X 25 X 11 Cm With Mesh With Two Elastic Straps With Buckle With Printed Logo On One Side (at The Back) Abc: Php 69,400.00 Sealed Quotation/proposal May Be Sent Or Delivered To: The Chair, Nast Bids And Awards Committee National Academy Of Science And Technology 3rd Level Science Heritage Building, Dost Compound Bicutan, Taguig City The Deadline For Submission Of Quotation Is On February 12, 2025 At 12:00 P.m. Ms. Virginia Francia O. Gavica Administrative Officer Iii Nast-bac Secretariat Notes: 1. All Entries Must Be Typewritten And Signed By The Company’s Authorized Representative. 2. Price Validity Shall Be For A Period Of Fifteen (15) Calendar Days. 3. Nast Reserves The Right To Accept Or Reject Any Or All Quotations And To Impose Additional Terms And Conditions It May Deem Proper. 4. Suppliers/contractors Must Submit The Eligibility Requirements Listed Below Together With Their Quotation/proposal. 5. This Is A Negotiated Procurement/small Value Procurement Because The Abc Is Less Than P1,000,000.00.   Sample Design   List Of Eligibility Requirements (to Be Submitted Together With The Quotation) 1. Mayor’s Permit (latest) 2. Certificate Of Philgeps Registration/philgeps Registration Number. 3. Income/business Tax Return. 4. Bir Certificate Of Registration 5. Tax Clearance Certificate 6. Notarized Omnibus Sworn Statement Omnibus Sworn Statement (revised) [shall Be Submitted With The Bid] ______________________________________________________________________ Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code.   In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. [insert Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Affiant [jurat] [format Shall Be Based On The Latest Rules On N

Details: Description Republic Of The Philippines City Of San Pedro Province Of Laguna City Bids And Awards Committee Invitation To Apply For Eligibility And To Bid Pr No. 2025-01-0063 1.the City Government Of San Pedro, Laguna Through The 2025 Budget Approved By The Sangguniang Panlungsod Intends To Apply The Sum Of Php 2,429,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Supply And Delivery Of Various Rescue Equipment And Supplies, Office Equipment, Furniture & Fixtures, And Other Supplies And Materials For Official Use Of Bfp San Pedro Fire Station. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2.the City Government Of San Pedro, Laguna Now Invites Bids For The Following: Quantity Unit Item Description 2 Unit Rescue Boat (hard Plastic, Detachable) Net Weight: 68kg, Seat Limit: 4-6 People, Load Bearing: 400kg Length: 3.33 Meters 1 Unit 2hp Window Type Aircon 6 Pcs Tablet 10.4 Inch 6gb/128 Gb 4 Set Firefighting Personal Protection Equipment (helmet-color Yellow, Trouser, Firecoat, Fireboots) 1 Unit Drone (weight: 595g) Max Flight Distance: 18.5km Max Speed: 67.5km/h Max Flight: 31min. Video: 5.4k Photo: 20mp Production 2 Unit Laptop Window 11 Home Single Language 64-bit Intel Core Tm I5 - 12500h Processor Dodeca-core 2.50 Ghz Nvidia Geforce Rtx Tm 3050 With 4 Gb Dedicated Memory 39.6 Cm (15.6") Full Hd (1920x1080) 16:9 144 Hz, 8gb, Ddr4 Sdram, 512 Gb Ssd 1 Pc Hero 13 Black Dive Bundle 64gb/128gb Tiny Mighty Action Camera 8 Pc Office Table With Drawer (computer Desk Office Table , White, L-100cm W-50cm H 74.5 Cm) 5 Pairs Booties For Water Rescue Size 8 2pcs. , Size 9 2pcs. And Size 10 1 Pc. 10 Pc Chairs (ergonomic Office Chair, W/o Wheels) 2 Pc Water Rescue Rope (50 Meters) 3 Pc Rescue 8 Decender 40 Kn 5 Pc Manual Lacking Steel Carabiner 1 Pc Static Rescue 11mm/200 Meters 5 Pc Rescue Helmet (hard Hat) 1 Pc Basket Stretcher 5 Pc Rope Rescue Gloves 5 Pc Standard Rescue Pulley 1 Pc Single Sheave Prusik Pulley 1 Pc Knot Passing Pulley 1 Pc Tandem Pulley 1 Set Fiberglass Extension Ladder 28ft (fiberglass Industrial Extension Ladder 28ft To 32ft) 3 Pc Respirator Mask 3m Mask 7 In 1 6200 Gas Mask Half Face Safety Respirator Mask Breathing Valve Mask Filter Dust Chemical Painting Anti-pesticide Formaldehyde Decoration ) 6 Pair Padded Gloves Pairs For Overhauling/ Extricating Gloves 5 Pc Led Flashlights For Headgears (super Bright Led Flashlight Xml T8 Waterproof Rechargeable Flashlight, Three Lighting Modes) 1 Roll Extension Wire 50 Meters Hd 1 Unit Chain Saw Delivery Of The Goods/services Is Required Within Sixty Calendar (60) Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3.bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. In Addition, Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 4.interested Bidders May Obtain Further Information From City Government Of San Pedro, Laguna And Inspect The Bidding Documents At The Address Given Below During 8:30am To 9:30 Am Only. Office Of The Bac Secretariat 4/f Conference Rm. City Administrator’s Office, City Hall Bldg., San Pedro, Laguna A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders On The Date, Time And Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Php 5,000.00. Issuance Of Eligibility And Bidding Documents: January 28, 2025 To February 17, 2025 8:30am – 9:30am Bac Secretariat 4/f Conference Rm. City Administrator’s Office, City Hall Bldg., San Pedro, Laguna 5.bids Must Be Delivered To The Address Below On Or Before The Specified Date And Time. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Deadline Of Submission Of Eligibility Requirements And Opening Of Bids: February 17, 2025 10:00 Am Bac Secretariat 4/f Conference Rm. City Administrator’s Office City Hall Bldg., San Pedro, Laguna Pre-bid Conference: February 5, 2025 10:00am Bid Opening Shall Be On The Same Date And Time For Deadline Of Submission Of Eligibility Requirements And Submission Of Bids And Shall Be Conducted At The Office Of The Bac Secretariat. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Given Above. Late Bids Shall Not Be Accepted. 6.the City Government Of San Pedro, Laguna Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bid. Further, City Government Of San Pedro, Laguna, Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 7.for Further Information, Please Refer To: Mr. Merlin B. Paala Office Of The Bac Secretariat Telefax No. 847.1722 Atty. Henry B. Salazar Chairman City Bids And Awards Committee

Details: As Of 08 January 2025, Amendment 0002 Has Been Made To:provide Responses To Contractor Inquiries (see Attachment). as Of 30 December 2024, The Following Amendments Have Been Made:1) The Size Standard Statement Has Been Removed And 2) The Project Manager (pm) Has Been Updated To Include R.a. Required. 1. Contract Information: these Contracts Are Procured As A Small Business Set-aside. The Naics Code’s Are 541330 And 541310. the Number One, Two And Three Ranked Small Business Firms Will Be Selected For Negotiations Based On Demonstrated Competence And Qualifications For The Required Work. The Length Of Each Indefinite Delivery Contract (idc) Is A Maximum Of 60 Months And Will Not Include Optional Time Periods. Three (3) Idc’s Will Share $49.9m Total Capacity Of The Matoc. Task Orders Will Be Issued By Negotiated Firm-fixed-price Task Orders To The Most Technically Qualified Offeror In Response To The Task Order Requirement Notification (torn) And Will Be Issued Under The Terms And Conditions Of This Matoc. The Government Guarantees A Minimum Value Of $4,000 Seed Task Order For Each Individual Idc. Labor Rates For Each Discipline, Overhead Rates, And Escalation Factors For Each 1 Year Time Period Will Be Negotiated For Each Basic Idc And Profit Will Be Negotiated For Each Task Order Not For Each Basic Idc. work Distribution Between Idcs: Task Orders (to) Will Be Distributed According To The Experience And Qualifications Of The A-e Firms. The Specific Contractor Chosen For A To Will Be Selected Based On Factors Such As Technical Expertise, Demonstrated Performance, Specific Ability, To Size And Complexity, And Contractor Availability To Complete The To In The Time Required. We Are Going To Have The A-e Firms To Compete Amongst The Highly Qualified Selectees For This Contract. Above All, It Is The Intent Of The New York District To Not Have A “hollow” Contract. three (3) Indefinite Delivery Contracts Will Be Negotiated That Includes Level Of Efforts, Labor Rates For Each Discipline And Overhead Rates For The Contract Period. Profit Will Be Negotiated In Each Task Order Not In The Basic Contract. the Selected Small Business A-e Firms Will Need To Demonstrate Capability To Perform At Least 51% Of The Contract Work Listed Below In Accordance With Ep 715-1, Chapter 3-8 C Which Can Be Found At Http//www.usace.army.mil/publications/eng.pamphlets/ep715-1-7 in Particular, In Order To Be Awarded A Small Business Contract The Concern Will Perform At Least 51 Percent Of The Cost Of The Contract Incurred From Personnel With Its Own Employees. “any Subcontractor And Outside Associates Or Consultants Required By The Contractor (prime A-e Firm) In Connection With The Services Covered By The Contract Will Limit To Individuals Or Firms That Were Specifically Identified And Agreed To During Negotiations The Contractor Shall Obtain The Contracting Officer’s Written Consent Before Making Substitutions For These Subcontractors, Associates Or Consultants”. if A Substitution Is Necessitated By Illness, Death, Or Termination Of Employment For Whatever Reason, The Selected A-e Firm Shall Notify The Contracting Officer In Writing Within 15 Calendar Days After The Concurrences Of Any Of These Events And Provide The Following Information To The Contracting Officer: required Information For Substitution Necessitated By Illness, Death, Or Termination Of Employment For Whatever Reason: The Contractor Shall Provide A Detailed Explanation Of The Circumstances Necessitating The Proposed Substitution, Complete Resumes For The New Proposed Substitutes, And Any Additional Information Requested By The Contracting Officer. Proposed Substitutes Should Have Comparable Qualifications Or Better Qualifications To Those Of The Persons Being Replaced. The Contracting Officer Will Notify The Contractor Within 15 Calendar Days After Receipt Of All Required Information Of The Decision On Substitutions. approximate Award Date: June 2025 the Wages And Benefits Of Services Employees (see Far 22.10) Performing Under This Contract Must Be At Least Equal To Those Determined By The Department Of Labor Under The Service Contract Act, As Determined Relative To The Employee’s Office Location (not Of The Location Of The Work). To Be Eligible For A Contract Award, The Firm Must Be Registered In The Dod Central Contractor Registration (ccr). Registered Via The Ccr Internet Site At Http://www.ccr.gov Or By Contacting The Dod Electronic Commerce Information Center At 1-800-334-3414. 2. Project Information: a-e Services May Include But Not Be Limited To The Following: general Architect Engineering Services To Include Support Of The Milcon Programs, Sustainment, Restoration And Modernization (srm) Program, Iis Program And Other Non-military Construction Programs Within Nan/nad Boundaries. architect Engineering (a-e) Services For Smaller Scale Projects Typically With A Construction Cost Of Approximately $10m Or Less To Include The Following: construction Of New And Renovation/upgrade Of Multiple Hangar/buildings, Maintenance, Training Facilities (hands-on/simulators), Aviation Facilities, Runways And Taxiways, Aircraft Fueling Facilities/distribution, Industrial Facilities, Vehicle Maintenance Facilities, Research & Design Facilities (armament, Munitions And Communications), Munitions And Storage Facilities, Dining Facilities, Academic Labs, Barracks/dormitories, Academic Facilities, Administrative Office Buildings antarctic/cold Region Construction. whole And/or Partial Building Renovations Which Address Interior Re-configuration, Life/safety, Energy Conservation, And Utility Systems. architectural Alterations Which Address New Space Requirements, Programmed Functions Such As: Maintenance, Training Facilities, Storage, Administrative Spaces, And Squad/ops. new Building Exterior And Envelope (cold Region) Shall Follow The Architectural Compatibility Plan Defined At The Base Inclusive Of, Structural Roof Systems, Insulation And Waterproofing, Windows, And Atfp. mechanical/electrical/plumbing (mep): Fire Suppression And Water Supply Systems, Fire Alarm And Mass Notification System, Cybersecurity, Fire Detection/protection/monitoring And Controls, Heating And Ventilation Systems, Plumbing Systems, Electrical Systems, Telecommunication And Cabling Systems, Closed Circuit Television (cctv), Alarm And Card Access Systems, And Public Address Systems. topographic Surveys, Geological Surveys, Geotechnical Investigations, Environmental Investigations, Master Planning Studies, Value Engineering Studies, Field Investigation Studies, Construction Support Services. asbestos And Lead Abatement Services Related To Building Renovation Or Demolition. perform/conduct Design Charrettes Including Eco-charrettes prepare Studies (to Include Building, Energy, Life-cycle Studies) prepare Parametric Designs, To Include Development Of Dd Form 1391 Preparation. site & Infrastructure/seismic Design In Accordance With The Ufc’s development Of Design Criteria And Basis Of Design design Work Analysis And Technical Specifications nepa Documentation And Coordination historic Architecture And Section 106 Consultation preparation Of Permit Applications. preparation Of Design/build Documents preparation Of Arctic Foundation Designs, Building Air Tightness And Hvac Performance For Cold/arctic Regions. preparation Of Designs Including Hemp And Scif Areas. preparation Final Design Construction Documents antiterrorism/force Protection Design In Accordance With Applicable Ufc’s sustainable Design/gbi/net Zero Strategy Development cost Estimating Using The Latest Version Mii [m2] Software. value Engineering Studies And Cost Schedule Risk Analysis (csra). preparation Of Deliverables In Building Information Modeling (bim) Format. drawings In Accordance With The Architectural/engineering/construction (a/e/c) Computer-aided Standard Version (cadd) demonstrated Construction Phase Services: design During Construction preparation Of Operation And Maintenance Manuals providing Technical Assistance – Responding To Requests For Information (rfis) design Build Conformance Reviews shop Drawing Review – Review Of Shop Drawings And Submittals conduct Site Visits commissioning/enhanced Commissioning; Fit-up Design Support project Start-up – Coordinate With Contractors To Start Up And Conduct Performance Tests Of The Constructed Project. projects Designed Under These Contracts May Require Designers To Obtain Security Clearances As Well As Having Physical Security Measures In Place Before A Firm Can Do The Work. Security Clearances Are Not Required At The Time Of Selection Or Award Of A Contract. 3. Selection Criteria: primary Selection Criteria: the Selection Criteria Are Listed Below In Descending Order Of Importance (first By Major Criterion And Then By Each Sub-criterion). criteria A Through E Are Primary Selection Criteria. criteria F Through H Are Secondary Selection Criteria And Will Only Be Used As Tiebreakers Among Technically Equal Firms. the Firm Is Required To Have The Following Specific Design Capabilities: a. Specialized Experience And Technical Competence In: submit At Least Five (5) Example Projects In Sf-330 Section F That Demonstrates Experience With The Following: Building (whole And/or Partial) Renovation Design That Includes At Least Five (5) Of The Following Design Elements As A Substantial Part Of The Design (replacement Of Architectural Elements, Interior Re-configuration, Building Seismic Upgrade, Anti-terrorism/force Protection Upgrades, Mechanical Systems, Hvac Systems, Electrical Upgrades, Fire Protection/detection Systems, Exterior Envelope Upgrades Including Roof, Windows And Walls, Asbestos And Lead Abatement.). The Projects Shall Demonstrate The A/e’s Ability To Execute Design Charrettes, Concept Designs, Final Designs And Prepare Final Construction Bid Documents. Projects May Include The Following Facility Types: Academic Facilities, Administrative Facilities, Barracks, Research And Development Facilities, Manufacturing Facilities, Hangers, Maintenance Facilities And Training Facilities. The Ae Shall Identify The Month And Year The 100% Final Design Was Completed. The Ae Shall Identify The Month And Year The Construction Was Completed. Projects Shall Have A Construction Cost Of Approximately $10m. Construction Of The Projects Must Be Completed After January 2017. Projects Completed Before January 2017 Will Not Be Considered. submit At Least Three (3) Example Projects In Sf-330 Section F That Demonstrates Experience With The Following: Infrastructure Type Design That Includes At Least Three (3) Of The Following Design Elements As A Substantial Part Of The Design. The Ae Shall Demonstrate Experience In Planning, Designing And Preparing 100% Construction Bid Documents. Projects May Include The Following Project Types (each Example Project Shall Represent A Different Project Type): Road/parking Replacement/repairs, Utility Infrastructure Replacement/repairs, Utility Central Plant Upgrades/repairs, And Retaining Wall Upgrades/repairs. The Ae Shall Identify The Month And Year The 100% Final Design Was Completed. The Ae Shall Identify The Month And Year The Construction Was Completed. Projects Shall Have A Construction Cost Of At Least $5m. Construction Of The Projects Must Be Completed After January 2017. Projects Completed Before January 2017 Will Not Be Considered. submit At Least Two (2) Example Projects In Sf-330 Section F That Demonstrates Experience With The Following: Design Of New Facilities. The Ae Shall Demonstrate Experience In Sustainable Design Using An Integrated Design Approach And Emphasizing Environmental Stewardship, With Experience In Energy And Water Conservation And Efficiency; And Employing The Leed Evaluation And Certification Methods. The Projects Shall Demonstrate The A/e’s Ability To Execute Design Charrettes, Concept Designs, Final Designs And Prepare Final Construction Bid Documents. Projects May Include The Following Facility Types: Academic Facilities, Administrative Facilities, Barracks, Research And Development Facilities, Manufacturing Facilities, Hangers, Maintenance Facilities And Training Facilities And Training Facilities. The Ae Shall Identify The Month And Year The 100% Final Design Was Completed. The Ae Shall Identify The Month And Year The Construction Was Completed. Projects Shall Have A Construction Cost Of Approximately $10m. Construction Of The Projects Must Be Completed After January 2017. Projects Completed Before January 2017 Will Not Be Considered. the Above Requested Projects Shall Also Demonstrate The A/e’s Abilities With All Of The Following: - Planning And Scheduling Management Of Fast Track Designs, - Working On Military Installation Projects, - Prepare Cost Estimates Using Mii And Paces, (the Cost Estimator And/or The Subcontractor Should Demonstrate Familiarity With The Changing Dynamics Of The Current Construction Market In The Tri-state New York Area With Particular Emphasis On The Southern New Jersey), - Preparing Drawings In Autocad And Autocad Revit, - Experience In The Ability To Provide A Qa/qc Plan Indicating How The Prime Plans To Manage Their Team To Ensure That Quality Products Are Prepared. Demonstrate Ability To Produce Quality Designs. Evaluation Will Be Based On The Firm's Design Quality Management Plan (dqmp) And Will Consider The Management Approach, Coordination Of Disciplines, Management Of Subcontractors And Quality Control Procedures. on All Ten (10) Example Projects, The Government May Consider The Following Strengths For Evaluation Purposes: projects Demonstrating Experience Working At Military Installations Within Nan Boundaries. projects Demonstrating Experience Working With Nydec And Njdep In Obtaining Environmental Permits. projects Demonstrating Experience With Sustainable Design And Achieving Leed Silver Or Better. projects Demonstrating Experience Working Mcaces Paces And Pax/dd1391. projects Demonstrating Experience With Fast-tracked Designs. projects Demonstrating Experience Utilizing A Design Quality Control Plan projects Demonstrating Experience In Permitting, Real Estate Actions, Nepa Documentation, And Other Agency Coordination Tasks. b. Qualified Registered Professional Personnel In The Following Key Disciplines: project Manager (p.e. Or R.a. Required) quality Assurance Manager (p.e. Or R.a. Required) architecture (r.a. Required) structural Engineering (p.e. Required) civil Engineering (p.e. Required) mechanical Engineering (p.e. Required) electrical Engineering (p.e. Required) fire Protection Engineering (p.e. Required) landscape Architect (r.la. Required) cost Engineering (p.e. Required. Those With Ccp/cpe Certification Will Be Considered A Strength) geotechnical Engineering (p.e. Required) certified Industrial Hygienist (cih Required) licensed Interior Designer (ncid Required) land Surveyor (p.l.s. Required) anti-terrorism/force Protection Specialist (p.e. Required) blast/explosives Safety Engineering (p.e. Required) industrial Engineering (p.e. Required) industrial/process Engineer (p.e. Required) lean-six Sigma Professional historic Preservationist environmental Engineering (p.e. Required) lead Commissioning Specialist (p.e And At Least One Of The Following: A Nebb Qualified Systems Commissioning Administrator (sca); Acg Certified Commissioning Authority (cxa); Icb/tabb Certified Commissioning Supervisor; Bca Certified Commissioning Professional (ccp); Aee Certified Building Commissioning Professional (cbcp); University Of Wisconsin-madison Qualified Commissioning Process Provider (qcxp); Ashrae Commissioning Process Management Professional (cpmp)) certified Value Specialist (cvs Required) telecommunications Engineering (rccd Required) master Planner (p.e. Or R.a. Required) the Evaluations Will Consider Education, Training, Registration, Voluntary Certificates, Overall And Relevant Experience, And Longevity With The Firm Using Information From Section E Of The Sf 330. The Sf 330 Includes A Matrix In Section G Showing Experience Of The Proposed Lead Designers On The Projects Listed In Section F Of The Sf 330. senior Project Personnel For Each Discipline Are Required To Be Licensed And/or Registered. additional Disciplines May Be Submitted As Required By The Ae For This Type/size Project And Will Be Evaluated As The Above. fire Protection Engineering: The Services And Qualifications Of Fire Protection Engineers Are Shown In Section 1.6 Of Ufc 3-600-01, And Are Reiterated Here: A Qualified Fire Protection Engineer Shall Be An Integral Part Of The Design As It Relates To Fire Protection. This Includes, But Is Not Limited To, Building Code Analysis, Life Safety Code Analysis, Design Of Automatic Detection And Suppression Systems, Water Supply Analysis, And A Multi-discipline Review Of The Entire Project. For The Purposes Of Meeting This Requirement A Qualified Fire Protection Engineer Is Defined As An Individual Meeting One Of The Following Conditions: i.) A Registered Professional Engineer (p.e.) Having A Bachelor Of Science Or Master Of Science Degree In Fire Protection Engineering, From An Accredited University Engineering Program, Plus A Minimum Of 5 Years’ Work Experience In Fire Protection Engineering. ii.) A Registered Professional Engineer (p.e.) Who Has Passed The National Council Of Examiners For Engineering And Surveys (ncees) Fire Protection Engineering Written examination. iii.) A Registered Professional Engineer (p.e.) In A Related Engineering Discipline With A Minimum Of 5 Years’ Experience, Dedicated To Fire Protection Engineering That Can Be Verified With Documentation. the Ae And Their Subconsultants Must Be A U.s. Company(ies). The Ae’s Team Must Use Only U.s. Citizens Or U.s. Persons (an Individual Who Has Been Lawfully Admitted For Permanent Residence As Defined In 8 U.s.c. § 1101(a)(20) Or Who Is A Protected Individual As Defined By Title 8 U.s.c. § 1324b (a)(3)). The A-e’s Team Must Be Able To Obtain Visitor Registration Documents/passes To Access Any Military Base And/or Federal Facility Under This Contract. c. Past Performance On Dod And Other Contracts With Respect To Cost Control, Quality Of Work And Compliance With Performance Schedules, As Determined From References, Other Sources And Cpars. Letters Of Recommendation From Customers Addressing Your Firm’s Cost Control, Quality Of Work And Schedule Compliance Capabilities May Be Included In Section H Of The Sf 330. Letters Should Be For Projects Of A Similar Nature And Shall Be No Older Than Three Years To Be Considered. d. Capacity To Initiate Work And Complete Within The Time Parameters Of The Project. The Evaluation Will Consider The Availability Of An Adequate Number Of Personnel In All Key Disciplines. The Evaluation Will Review Part Ii Of The Sf330 To Evaluate The Overall Capacity Of The Team. Include A Part Ii Form Of The Sf 330 For Each Firm And Each Office Of Each Firm That Is Part Of The Proposed Team. e. Knowledge Of The Locality In The General Geographical Area Of Ny District Boundaries. The Evaluators Will Review Projects Identified In Section F, The Specific Experience Of The Listed Key Discipline In Section E And Additional Information In Section H In Order Of Preference. secondary Selection Criteria: f. Geographic Proximity In Relation To Ny District Boundaries. g. Volume Of Work Previously Awarded To The Firm By The Department Of Defense, With The Object Of Effecting An Equitable Distribution Among Qualified A/e Firms, Including Small Business, Veteran-owned Small Business, Service-disabled Small Business, Hubzone Small Business, Small Disadvantaged Small Business And Woman-owned Small Business And Minority Institutions And Firms That Have Not Had Prior Dod Contracts. 4. Submission Requirements: interested Prime Firms Having The Capabilities To Perform These Services Must Submit Their Sf330 To Stephen Dibari By Email Stephen.dibari@usace.army.mil Maximum File Size Is 25 Mb If Overall Sf330 Is Larger Than 25 Mb, Please Break Up The File Into Smaller Separate Files. no Hard Copies Of Sf-330’s Will Be Required. Do Not Mail Sf-330’s (cd Or Hard Copies) To The Contract Specialist Nor To Stephen Dibari At 26 Federal Plaza. Doing So, Will Delay The Ae Selection/award Process. the Sf 330 Can Be Found By Searching For Sf330 On The Following Gsa Website: Https://www.gsa.gov/forms the Forms Can Be Downloaded In A .pdf File Type. Total Submittal Page Limitation Is 85 Pages. Section E Is Limited To 50 Pages. Section F Is Limited To 10 Pages (1 Page Per Project). Each Page Shall Be Numbered. Section Dividers, Front And Back Covers, Cover Letter And Part Ii Of The Sf 330 Don’t Count Towards Overall Page Limit. Tabloid Size Paper 11” X 17” Pages For Organizational Chart Or Other Graphics Will Count As One Page. Submittals Not Following These Instructions, May Not Be Evaluated By The Board. supplemental Information On The Sf 330 Is Posted On The Ny District Usace Website: Https://www.nan.usace.army.mil/business-with-us/engineering-division/ submittals Will Not Be Accepted After 2:00 Pm On The Response Date Shown In The Advertisement In The Https://sam.gov/. If The Response Date Falls On A Saturday, Sunday, Or A Federal Holiday, The Response Date Will Move To The Next Business Day. for Questions Regarding This Contract, Contact Stephen.dibari@usace.army.mil if A Pre-selection Meeting Is Required, Notifications Will Not Be Sent After Approval Of The Pre-selection. Notification Of All Firms Will Be Made Within Ten (10) Calendar Days After Selection Approval. In Addition To The Two (2) Items Listed Above, The Remaining Info On Release Of Information On Firm Selection Shall Be In Accordance With Uai Subpart 5.4 (usace Acquisition Instructions). interviews (discussions) Will Be Held With All The Most Highly Qualified Firms As Required By Far 36.602-3(c). All Firms Will Be Interviewed By The Same Method (telephone, Video Teleconference Or In Person). Firms Will Be Given Sufficient Advance Notice To Allow Representatives To Participate In The Interviews Or Presentations. All Firms Will Be Asked Similar Questions. The Questions Will Be Related To The Announced Selection Criteria Including But Not Limited To, Their Experience, Capabilities, Capacity, Organization, Management, Quality Control Procedures And Approach For This Project. firms Must Be Registered In The Following: Https://www.sam.gov/ naics Code’s Are 541330 And 541310. interviews (discussions) Will Be Held With All The Most Highly Qualified Firms As Required By Far 36.602-3(c). All Firms Will Be Interviewed By The Same Method (telephone, Video Teleconference Or In Person). Firms Will Be Given Sufficient Advance Notice To Allow Representatives To Participate In The Interviews Or Presentations. All Firms Will Be Asked Similar Questions. The Questions Will Be Related To The Announced Selection Criteria Including But Not Limited To, Their Experience, Capabilities, Capacity, Organization, Management, Quality Control Procedures And Approach For This Project.

Details: Description 1. Angle Grinder With Accessories (branded) Specifications: Rated Input Power: 710w Disc Diameter: 100mm Brush Diameter: 100mm 2 Pieces 2. Portable Inverter Arc Welding Machine (branded) Specifications: Power Supply Voltage: 220 – 240v Rated Input Capacity: 28kva Ampere Range: 20 – 450amps 2 Pieces 3. Flip – Up Automatic Welding Helmet Specifications: Changeable Battery Automatic Darkening Welding Filter Variable Shades: 5 – 8 And 9 – 13 2 Pieces 4. Leather Welding Apron 2 Pieces 5. Leather Welding Gloves 2 Pairs 6. Grinding Helmet Specifications: Atleast 200mm High Grinding Visor 4 Pieces 1. Marine Type Plywood (local) 4ft X 8ft X 5mm Type: Type 1 (marine Plywood) 25 Pieces 2. Marine Type Plywood (local) 4ft X 8ft X 10mm Type: Type 1 (marine Plywood) 25 Pieces 3. Marine Type Plywood (local) 4ft X 8ft X 18 Mm Type: Type 1 (marine Plywood) 25 Pieces 1. Branded Premium Marine Type Plywood 4ft X 8ft Thickness: 5mm Type: Type 1 (marine Plywood) Approximately 8 – 9kgs Per Piece 10 Pieces 2. Branded Premium Marine Type Plywood 4ft X 8ft Thickness: 10mm Type: Type 1 (marine Plywood) Approximately 19– 20kgs Per Piece 10 Pieces 3. Branded Premium Marine Type Plywood 4ft X 8ft Thickness: 18mm Type: Type 1 (marine Plywood) Approximately 30 – 33kgs Per Piece 10 Pieces 1. Plasma Cutter Specifications: Current Input: 1ph 10 – 40a Torch Tpt40 (4 Meters) W/ Earth Clamp, 2 Meters Cable, 10mmˆ2 Inclusion For Tpt40 Plasma Torch: Alteast 4 Pieces Of Nozzles, 10 Pieces Of Tips, 2 Pieces Of Diffusers, 10 Pieces Of Electrodes 1 Unit 2. Mig/mag Welding Machine Specifications: 250a 240v 1hp Torch 250a (3 Meters) Earth Clamp (2.5 Meters) 190cr Co2 Flow Gauge Regulator Cga – 320 Inclusion Welding Mask And Gloves Feedroll Φ 0.8/1.0 Feedroll Φ 0.8/1.2 Contact Tip M6 1.0mm X 28mm (atleast 1 Piece) Carbon Teflon Liner I.d 1.5mm 3.5m – Black W/ 0.8 – 1.0mm (atleast 1piece) Carbon Teflon Liner I.d 1.5mm 3.5m – Black W/ 1.0 – 1.2mm (atleast 1piece) 1 Unit 1. 200 Liters Plastic Chemical / Water / Oil Barrel Specifications: Hdpe Plastic Vertical Water Drum Bucket Type: Double Ring Closed Top Color: Blue 18 Pieces 2. ½” Galvanized Iron Pipe (s-20) Diameter: ½”, 6m Length 45 Pieces 3. ¾” Galvanized Iron Pipe (s-20) Diameter: ¾”, 6m Length 28 Pieces 4. 1” Galvanized Iron Pipe (s-20) Diameter:1”, 6m Length 40 Pieces 5. 1 ¼” Galvanized Iron Pipe (s-20) Diameter: 1 ¼”, 6m Length 10 Pieces 6. 1 ¼” Galvanized Iron Pipe (s-40) Diameter: 1 ¼”, 6m Length 10 Pieces 7. 2” Galvanized Iron Pipe (s-40) Diameter: 2”, 6m Length 10 Pieces 8. 2 ½” Galvanized Iron Pipe (s-40) Diameter: 2 ½”, 6m Length 10 Pieces 9. 3” Galvanized Iron Pipe (s-40) Diameter: 3”, 6m Length 10 Pieces 10. 4” Galvanized Iron Pipe (s-40) Diameter: 4”, 6m Length 10 Pieces 11. 1” Mild Steel Flat Bar Thickness: 2mm; 6m Length 15 Pieces 12. 2” Mild Steel Flat Bar Thickness: 5mm; 6m Length 25 Pieces 13. 3” Mild Steel Flat Bar Thickness: 5mm; 6m Length 10 Pieces 14. Mild Steel Checkered Plate Dimensions: 4ft X 8ft; Thickness: 10m 5 Pieces 15. Mild Steel Plate Dimensions: 4ft X 8ft; Thickness: 10mm 2 Pieces 16. Grade 4 Deformed Steel Bar Diameter: 12mm; 6m Length 10 Pieces 1. Welding Protection Apron Material: Cowhide – Leather Type: Long Sleeve Apron Durable; Heat And Flame Resistant One Size Fits All 5 Pieces 2. Pvc Apron Material: Pvc Apron Pc – 2151 Color: Gray Chemical Resistant Suits 10 Pieces 3. Good Quality Leather Welding Gloves Ai – 140 Welding Gloves With Linings Size: 13 Inches Color: Orange 5 Pairs 4. Working Cover – All Suits (ppe) Color: Gray Durable, Waterproof Sizes: 3 Pieces Small (s) 3 Pieces Medium 2 Pieces Large 2 Pieces Extra Large 25 Pieces 5. White Cloth Sleeve Washable Clothe Sleeve Arm Protection 20 Pairs 6. White Safety Helmet (hard Hat) Material: Abs Inclusive Of Chin Strap Color: White 25 Pieces 7. Safety Life Vest Working Type Life Vest With Whistle And Reflector 15 Pieces 8. Welding Protection Mask Moisture Proof Welding Mask Polupropylene Shell 5 Pieces 9. Marine Life Buoy/ring About 2.5kg Life Ring Solas Approved Life Ring Outside Diameter: 725mm Inner Diameter: 445mm Buoyancy: ≥14.5kg Buoyancy Material: Urethane Foam Shell: High Density Polyethylene With Reflector 5 Pieces 10. Industrial Safety Boots Color: Black Ce Approved En20345 – S1p Steel Toe Cap Steel Midsole Anti – Static And Anti – Vibration And Oil Resistant And Slip Resistant Split Leather Upper Size: 2 Pairs For 7 Uk Size 2 Pairs For 8uk Size 2 Pairs For 9uk Size 2 Pairs For 10uk Size 2 Pairs For 12uk Size 10 Pairs 11. Led Flashlight With 4 Sets Of Extra Batteries 2 Cell Battery Explosion Roof Color: Orange And Black 2 Pieces 12. Branded High Quality Steel Tape Measure Length: 3 Meters 2 Pieces 13. Branded High Quality Steel Tape Measure 2 Pieces 14. Branded High Quality Steel Tape Measure Length: 8 Meters 2 Pieces

Details: Description "republic Of The Philippines Province Of Negros Oriental City Of Bayawan" Bids And Awards Committee Bid No.: Itb-25-027 Date.: 23.jan.2025 Invitation To Bid Sealed Bids For Quotation Of Prices Will Be Recieved For The Purchase Of The Following Supplies, Materials And Equipment Of The Government To Be Opened On The Date, Place, And Time Stated In Instruction To Bidders. Item No. Qty Unit Articles Brand "unit Price" Total Lot No. I Dental Supplies And Instruments 1 20 Box Tuberculin Syringe, 1 Ml,100 Pcs/box 2 11 Box Hexetidine, Hexetidine, 1% (120ml/bottle) 3 138 Dozen Toothpaste, Sachet, Twin Pack, 12pcs/doz 4 25 Pack Disposable Dental Bib, 2ply, Waterproof, 100s/pack 5 1800 Piece Toothbrush , Soft Bristle Kids, Standard Pda Approved Lot No. Ii Medical Laboratory Equipment 6 20 Box Silk 3-0 Curved, Cutting 12s "suture Type: Synthetic Braided. Absorption Profile: Non-absorbable. Suture Diameter: 3-0. Suture Lengths (cm): 35- 180. Suture Material: Natural Silk Filaments" 7 35 Box Syringe , Gauge 23, 0.5ml (100 Pcs Per Box) 8 1 Set Surgical Set , With The Ff. Mosquito Forceps, Tissue Forceps, Thump Forceps, Straight Kelly Scissors, Curve Kelly Scissors, Straight Mayo Forceps, Metzenbaum Scissors, Needle Holder, Scalpel Handle No. 3, Bandage Scissors Lot No. Iii Medical Laboratory Instruments And Devices 9 20 Box Lancets, G23, 200pcs/box 10 10 Tube Uric Acid Strips, 25s/tube Compatible With Existing Meter (gcu Easy Touch) Atleast 2 Years Expiry Upon Delivery 11 12 Set Sphygmomanometer, Blood Pressure Monitor Set (with Stethoscope), Manual, Good Quality, W/ Case 12 100 Piece Surgical Blade, Size No. 10 13 3 Unit "pulse Oximeter, Finger Type Measurement Range: Sp02: 35%-99% Precision: Sp02: 70%-99%; ±2%; 35%-69% (unspecified) Pulse Rate: 30-250 Bpm; ± Sp02 Accessory Adult Probe Included, Pediatric, Neonatal Probe Optional Power Supply: 2x (aaa) Alkaline With Manual" 14 800 Piece Hepa B Test Kit, Cassette Type Lot No. Iv Medical Laboratory Supplies 15 800 Piece Syphilis Test Kit, Cassette Type 16 4 Set Blood Typing Sera, Anti A And Anti B Set 17 100 Pack Cotton Balls, 150pcs/pack 18 3 Tray Edta Tubes, 2 Ml For Blood Collection 19 5 Tray Edta Microtubes, For Blood Collection 20 100 Kit Dengue Test Kit, Ns1 Rapid Dengue Test 21 3 Bottle Blood Typing Sera , Anti D,10 Ml 22 20 Bottle Urine Test Strips , (100s/bottle) 10 Parameters At Least 2 Years Expiry Upon Delivery 23 4 Unit "glucometer, Compatible With Existing Strips (exactive) Hyper & Hypo Glycemia Indicator, Enlarged Lcd Display, 5-second Test Time, Automatic Coding, 500 Memory, Tiny 0.6ul Sample Size" 24 2 Box Hematocrit Sealing Clay, Clay Sealant And 24-place Holding Tray For All Types Of Microhematocrit Capillary Tubes, Leak-tight Seal, Non-toxic, Non-drying, And Non-hardening, Not Sticky At Room Temperature, 10s/box 25 80 Box Gauze Pads, 4 In. X 4 In. Non-sterile, 8 Ply, 100pcs/box 26 5 Gallon Glutaraldehyde Solution, Activated Cidex, 5l/gal (for Disinfection) 27 240 Piece Plaster, Hypoallergenic, 1 Inch 28 1 Box Surgical Gloves, 6.5 Size , 50 Pairs/box 29 2 Box Surgical Gloves, 7.5 Size, 50 Pairs/ Box 30 10 Box Disposable Syringe With Needle, 5ml, 100s/box 31 3 Box Disposable Syringe With Needle, 10ml, 100s/box 32 10 Bottle Povidone Iodine 10%, 1 Gallon Solution 33 9 Piece "digital Thermometer, Material: 88*42*175mm Battery: 2 X Aaa Battery (not Included) Measuring Range: 32℃~42℃ Measuring Distance: 50-150mm Good Quality" 34 15 Box Chromic Suture, 3-0 Absorbable 1/2 Circle Cutting, 12s/box 35 18 Piece Iv Infusion Set, Macroset Tubing 36 20 Piece Iv Infusion Set, Microset Tubing 37 30 Piece Iv Cannula With Injection Valve , Teflon Feb Catheter And Luerlock Plug G 26 38 30 Piece Iv Cannula With Injection Valve , Teflon Feb Catheter And Luerlock Plug G 24 39 30 Piece Iv Cannula With Injection Valve , Teflon Feb Catheter And Luerlock Plug G 20 40 10 Pack Disposable Under Pads, 3/pack 41 11 Box Disposable Needle, G25 100s 42 3 Set Bp Apparatus, Set With Stethoscope (pedia) 43 3 Unit "infrared Thermometer, Hand-held, Battery Operated, Heavy Duty With Batteries" 44 1 Box Surgical Gloves, Size 7, 50 Pairs/box 45 3 Piece Curve Forcep , Medium 46 10 Box Non-sterile Gloves, Medium,100 Pcs/box 47 28 Bottle Alcohol, Isopropyl, 70% Solution, 500ml 48 11 Bottle Hydrogen Peroxide, 10 Volume, 500ml 49 150 Piece "plastic Container With Screw Cap Lid, For Sputum Test Capacity Volume: 100-150ml" 50 15 Pair Gloves, Long Size, Household, Rubber , Good Quality 51 70 Box Disposable Syringe With Needle, 3ml, 100s/box 52 30 Tube Cholesterol Strips, 10s/tube (compatible To Existing Meter), Atleast 2 Years Expiry Upon Delivery (gchb Easy Touch) 53 2 Set Lyse And Diluent H3600, Heto , 2 Years Expiry Upon Delivery 54 1 Set Cleanser - Probe And Ez, Heto, 2 Years Expiry Upon Delivery 55 1 Set H3600 Control Tri Level, (high,low, Normal) *** Nothing Follows*** Grand Total: Place Of Delivery: Fob Bayawan, City Warehouse Form And Amount Of Bid Security I Hereby Certify That The Above Articles Are Equally Carried In Stock By Me In Quantities Above Sstated Except Those Marked "none". Terms And Conditions Specified In The Annex Of This Are Herein Accepted. The Quantity Shown And Prices As Quoted Are Hereby Offered. Name Of Business/company Address/contact Number Signature Over Printed Name Evaluation: Bids And Awards Committee Virginia D. Sadiasa, Chairman Corazon P. Lirazan, Member Saturnino T. Dayanan, Vice Chairman Nefredo Camilo A. Villarubia, Member Wilfredo C. Tuale, Member Ernest N. Dinoipol, Member

Details: Description Republic Of The Philippines Province Of Quezon Municipality Of Polillo ***** Invitation To Bid For Supply And Delivery Of Semi-expendable Machinery And Equipment-lgu Polillo Quezon 1. The Municipality Of Polillo, Through The Approved Budget 2025, Approved By The Sangguniang Bayan Of Polillo Intends To Apply The Sum Of Six Hundred Fifty-four Thousand Three Hundred Eight Pesos & 48/100 Only (php 654,308.48) Being The Abc To Payments Under The Contract For Supply And Delivery Of Semi-expendable Machinery And Equipment-lgu Polillo Quezon Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipality Of Polillo Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 30 Calendar Days. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Municipality Of Polillo And Inspect The Bidding Documents At The Address Given Below During Monday To Friday, 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 3-10, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos Only (php 1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. Bids Must Be Duly Received By The Bac Secretariat Through: (i) Manual Submission At The Office Address Indicated Below Or (ii) Online Or Electronic Submission As Indicated Below On Or Before February 10, 2025 2:30pm. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be On February 10, 2025 2:30pm At The Given Address Below And/or Messenger. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The Municipality Of Polillo Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Deborah B. Marasigan Bac Chairperson & Bac Secretariat Mabini St. Brgy. Poblacion, Polillo, Quezon, 4339 Bac.polillo@gmail.com Deborah B. Marasigan Bac Chairperson Semi Expendable Airfreshner Programmable Dispenser 2 Unit Automatic Folding Umbrellarainproof Uv Sunproof Resistant 24 Bones, Color Black 6 Pice Bolo, 45cm Agricultural Knife With Sheath/high Quality 10 Piece Calculator 12 Digits 2 Pieces Clutch Bag (men's) Sling Bag Hand Bag Waterproof Premuim Quality 6 Piece Cutter Retractable 2 Unit Curtain Mocha/ Light Brown 2 Panel Curtain Rod 48x48 Inches And Bracket Set 1 Set Curtain Sheer 1 Panel Desk Tray 3 Layer 2 Pieces Dustpan, Heavy Duty 2 Piece External Hard Disk, Itb 2 Pieces External Usd Dvd Rom 1 Piece File Drawer / Organizer 5 Drawers, Legal 1 Piece Flashdrive 32 Gb 2 Pieces Flashdrive 64 Gb 2 Pieces Flashlight, Heavy Duty 7 Unit Fork & Spoon (6 Spoon & 6 Fork) 5 Dozen Glue Gun With Switch 1 Piece Guntacker 1 Unit Hdmi Cable 2 Roll Keyboard Usb Connection Type 11 Pieces Laminating Machine 1 Unit Mouse With Wire 11 Units Mouse Pad Ordinary 6 Pieces Mouse Pad Long 1 Piece Mop, Rotating Mop Regular Size 2 Unit Pail, 16l 2 Piece Papper Cutter Long 1 Piece Puncher 2 Holes ( Heavy Duty, Carl 75xl) 2 Unit Rechargeable Emergency Lamp (os), Twinhead Led Series 1 Unit Scissor Big 9 Pieces Self-inking Stamp Cuztomized Shiny , # 821 2 Pieces Self-inking Stamp Shiny , # 822 1 Piece Stapler Remover, Plier Type, Steel 3 Pieces Stapler With Built In Remover #35 2 Piece Stamp Pad 2 Piece Storage Box 155l, Utility Box 2 Piece Table Top Glas 1 Unit Tape Dispenser Big 2 Piece Throw Case 2 Piece Ups, 625va 3 Piece Wall Fan, 16 Inches 1 Piece Waste Bin With Cover,meduim Size 1 Piece Wireless Keyboard & Mouse, Multi-media, Numeric Pad Wide 2 Set Working Boots, (safety Shoes) For Operators Size 43 2 Pair Working Boots, (safety Shoes) For Operators Size 44 4 Pair Semi-expendable Furniture And Fixtures & Books Executive Chair 1 Unit Staff Office Chair, Simple Mesh Breathable Comfortable Swivel Chair 2 Unit Swivel Chair 18 Unit Visitor Chair, Heavy Duty 2 Unit Semi-expendable Machinery And Equipment Laptop Computer I5 Or Equivalent, 8gb Ram Cpu=intel Core I5-12th Gen. Or Equivalent Ram=8gb Storage=500gb M.2 Nvme Gpu=intel Iris Xe Graphics Or Equivalent Os= Windows 11 1 Unit Printer Print, Copy, Scan With Adf 5 Unit Television Normal Led Tv 32 Inch, Power: 60w,input 100-240v Ac, Display: Led, Ports Input: Usb, Resolution: Hd, Screen Size: 32 Inch 1 Unit Supply And Delivery Of Capital Outlay (information And Communication Technology Equipment) Laptop Computer I7 Or Equivalent, 16gb Ram Cpu=intel Core I7-12th Gen. Or Equivalent Ram=16gb Storage=500gb M.2 Nvme Gpu=intel Iris Xe Graphics Or Equivalent Os= Windows 11 1 Unit Laptop Computer I7 Or Equivalent, 16gb Ram With Gpu Cpu=intel Core I7-12th Gen. Or Equivalent Ram=16gb Storage=500gb M.2 Nvme Gpu=6gb Os= Windows 11 1 Unit Office Equipment Printer A3, Refill Ink Tank Multi- Function Center With Wireless & Ethernet Connectivity, Adf 1 Unit