Waterproofing Tenders

Details: Description Invitation To Rebid For The Procurement Of Supply And Delivery Of Ict Supplies And Accessories 1. The Department Of Agriculture-western Visayas, Through The National Expenditure Program 2025 (early Procurement Short Of Award) Intends To Apply The Sum Three Million Seven Hundred Forty Two Thousand Three Hundred Eighty Nine Pesos (php3,742,389.00) Being The Abc To Payments Under The Contract For Procurement Of Supply And Delivery Of Ict Supplies And Accessories/ib No. 2025-030 (gas). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture-western Visayas Now Invites Bids For The Procurement Of Supply And Delivery Of Ict Supplies And Accessories With The Following Specifications: Adapter, Hdmi To Hdmi Hdmi Male To Hdmi Female Cable Adapter, 4k@60hz, Maximum Uhd 3840×2160,backwa Rds Compatible 2560x1600, 2560x1440, 1920x1200, 1080p Resolutions, 22 Cm Long 1 Piece Adapter, Usb To Hdmi Usb-c + Usb-a To Hdmi Adapter, 2 Ports, Resolution: 1080p@60hz, Advanced Chip, Mirror And Extended Modes 1 Piece Digital Caliper Measuring Tool, Plastic Vernier Caliper Digitalmicrometer With Lcd Screen (0-150mm) 1 Unit Extension Cord With Voltage Surge Protector, 1 Switch Breaker, 6 Outlets With Ground, 5 Meters Long 106 Pieces Flash Drive 16gb, Usb 2.0, Backwards Compatible With Usb 1.1, Read Speed: 100mbps, Write Speed: 100 Mbps 60 Pieces Flash Drive 64gb, Usb 3.0, Backwards Compatible With Usb 2.0, Read Speed: 150mbps 126 Pieces Flash Drive 64gb, Usb 3.2, Gen 1 Compliant, Transfer Speed: 100mb/s2 5 Pieces Flash Drive 256gb, Usb 3.0, Read Speed: 150mbps 103 Pieces Hdmi Cable 2.1 4k 120hz, 48gbps, 7.3mm, Dynamic Hdr & Earc, Including Vrr, Qms, Qft And Allm, 3 Meters Long, Black 2 Pieces Hdmi Cable High Speed Hdmi 2.0, 4k 3d Cable Metal Case, 60hz, 18gbps, Transfer Rates: 10.2 Gbps / 340 Mhz, Hdcp Compliant, 5 Meters Long, Black, 23 Pieces Headlamp Rechargeable, Waterproof, 80 W, 6500 Mah, 4 Hours Bright Light, 9 Hours Weak Light, 50w Aluminum Reflect Cup With Light Led Source 3 Pieces Ink Bottle, Brother Btd60bk, Black, Genuine 29 Bottles Ink Bottle, Brother Bt5000c, Cyan, Genuine 46 Bottles Ink Bottle, Brother Bt5000m, Magenta, Genuine 46 Bottles Ink Bottle, Brother Bt5000y, Yellow, Genuine 46 Bottles Ink Bottle, Hp Deskjet/smart Tank Gt53 Xl Black 51 Bottles Ink Bottle, Hp Deskjet/smart Tank, Gt52 Cyan 53 Bottles Ink Bottle, Hp Deskjet/smart Tank, Gt52 Magenta 53 Bottles Ink Bottle, Hp Deskjet/smart Tank, Gt52 Yellow 53 Bottles Ink Cartridge, Brother Lc539xl, Black 20 Cartridges Ink Cartridge, Brother Lc535xl, Cyan 20 Cartridges Ink Cartridge, Brother Lc535xl, Magenta 20 Cartridges Ink Cartridge, Brother Lc535xl, Yellow 20 Cartridges Ink Cartridge, Brother Toner Cartridge, Tn 2260 10 Cartridges Ink Cartridge, Canon Cl-741, Colored 3 Cartridges Ink Cartridge, Canon Cl-811, Colored 3 Cartridges Ink Cartridge, Canon Pg-740, Black 3 Cartridges Ink Cartridge, Canon Pg-810, Black 3 Cartridges Ink Cartridge, Canon Pixma Pgi-35 Black 45 Cartridges Ink Cartridge Canon Pixma Cli-36 Color 35 Cartridges Ink Cartridge, Canon Pixma Printhead Cartridge, G4010 (black) (bh-7) 10 Cartridges Ink Cartridge, Canon Pixma Printhead Cartridge, G4010 (tri Color) (ch-7) 9 Cartridges Ink Cartridge, Epson C13t664100 (t6641), Black 253 Bottles Ink Cartridge, Hp 682, Black 102 Cartridges Ink Cartridge, Hp 682, Tri-color 181 Cartridges Ink Cartridge, Hp Cn692aa (hp704), Black 15 Cartridges Ink Cartridge, Hp Cn693aa (hp704), Tri-color 9 Cartridges Ink Cartridge, Hp Cz107aa (hp678), Black 31 Cartridges Ink Cartridge, Hp Cz108aa (hp678), Tri-color 31 Cartridges Ink Cartridge, Hp F6v26aa (hp680), Tri-color 350 Cartridges Ink Cartridge, Hp F6v27aa (hp680), Black 354 Cartridges Ink Cartridge, Hp L0s60aa (hp955), Black Original 6 Cartridges Ink Cartridge, Hp L0s63aa (hp955xl), Cyan Original 20 Cartridges Ink Cartridge, Hp L0s66aa (hp955xl), Magenta 20 Cartridges Ink Cartridge, Hp L0s69aa (hp955xl), Yellow 20 Cartridges Ink Cartridge, Hp L0s72aa (hp955xl), Black Original 29 Cartridges Ink Refill, Canon Gi-790bk 67 Bottles Ink Refill, Canon Gi-790c 65 Bottles Ink Refill, Canon Gi-790m 65 Bottles Ink Refill, Canon Gi-790y 65 Bottles Ink Refill, Canon Gi-71bk 4 Bottles Ink Refill, Canon Gi-71c 3 Bottles Ink Refill, Canon Gi-71m 3 Bottles Ink Refill, Canon Gi-71y 3 Bottles Ink Refill, Epson (001) Black 307 Bottles Ink Refill, Epson (001) Magenta 224 Bottles Ink Refill Epson (001) Cyan 219 Bottles Ink Refill, Epson (001) Yellow 215 Bottles Ink Refill, Epson (003) Eco Tank, Black 270 Bottles Ink Refill, Epson (003) Eco Tank, Cyan 194 Bottles Ink Refill, Epson (003) Eco Tank, Magenta 194 Bottles Ink Refill, Epson (003) Eco Tank, Yellow 194 Bottles Ink Refill, Epson (008) Eco Tank, Black 2 Bottles Ink Refill, Epson (008) Eco Tank, Cyan 2 Bottles Ink Refill, Epson (008) Eco Tank, Magenta 2 Bottles Ink Refill, Epson (008) Eco Tank, Yellow 2 Bottles Ink Refill, Epson C13t664200 (t6642), Cyan 186 Bottles Ink Refill, Epson C13t664300 (t6643), Magenta 188 Bottles Ink Refill, Epson C13t664400 (t6644), Yellow 188 Bottles Laser Pointer Laser Class 2, 2 Aaa Battery, 2.4 Ghz Wireless Technology 29 Pieces Maintenance Box, For Epson L6160/l6170, C13t04d100 24 Pieces Male Hdmi To Male Hdmi Cable Hdmi 2.0 Male To Male High Speed 18gbps 4k, 30hz, 1080p, 3d Hdmi Ethernet , 2 Meters Long 2 Pieces Male Usb To Male Hdmi Cable Usb 3.0 Male To Hdmi Male Cable, Support Usb2.0, Usb3.0, Output: 1920x1080p@ 60hz, 2 Meters Long 2 Pieces Memory Card, For Camera Use Extreme Pro Sd Card, 1 Tb, Shot Speed: 140mb/s, Read Performance: 200mb/s, Write Performance: 90mb/s 3 Pieces Micro Sd Card, 128gb, Sequential Read Performance: 140mbps, Transfer Speed: 150 Mb/s 64 Pieces Mouse Pad Non-slip Rubber Base, Fine Knit Edges, 25 X 20 X 0.2 Cm 23 Pieces Otg/dual Usb Drive 128gb, Read Speed: 150mb/s , Write Speed: 100 Mbps 104 Pieces Portable Hard Drive 1 Tb, Usb 3.2, Type C Connector, Read Performance: 1050 Mbps; Write Speed 1000 Mbps 22 Pieces Powerbank, 10000mah 20w, Lithium Polymer Battery, Usb-c Input/output: 20w Max, Usb-a Output: 22.5w Max, Battery Capacity: 37wh (10000mah 3.7v), Rated Capacity: 6250mah (5v 3a) 121 Pieces Powerbank, 20000mah 20w, Lithium Polymer Battery, Usb-c Input/output: 20w Max, Usb-a (out 1/out 2) Output: 22.5w, Battery Capacity: 20000mah 3.7v (74wh), Rated Capacity: 12500mah (typ 5v 3a) 7 Pieces Rechargeable Battery Aa, 1.2v, 2450 Mah, Ni-mh Battery, 2 Pieces/pack 4 Packs Rechargeable Battery Aaa, 1.2 V, 900 Mah, Ni-mh Battery, 2 Pieces/pack 4 Packs Ribbon Cartridge For Epson , For Use With Fx-2175/2190 (so15327, 32.0 Meters/ 104.9 Feet) 9 Pieces Solid State Drive, Portable, 500 Gb, Usb 3.2 Gen 2, Read Speed: 1050 Mb; Write Speed: 1000 Mb (max) W/ Usb C To Usb C Cable & Usb A Adaptors 5 Pieces Solid State Drive 256gb, 2.5 Inch Sata Iii, 6 Gb/s, Read Speed: 500mb/s, Write Speed: 320mb/s, Tbw: 80tb 2 Pieces Solid State Drive 1 Tb, Usb 3.2 Gen , 10gb/s, Read Speed: 1050 Mb/s, Write Speed: 1000 Mb/s 3 Pieces Toner Cartridge, Mx-315ft, Black 5 Pieces Toner Cartridge, Tn118 (konica Minolta Bizhub 215) 11 Cartridges Usb 3.0 Hub, 4 Ports Multi- Splitter Otg Adapter 4 Ports, Usb 3.0 Hub, 5 Gbps Transfer Speed, Supports Two 2.5 Inch Capacity 1 Tb Ssd, Backwards Compatible With Usb 2. 0 (480mbps), Usb 1. 1(12mbps), 1 Meter Long 5 Pieces Usb 3.0 Hub, 6 In 1 Sd Tf For Laptop Pc 6-in-1 Usb 3.0 Hub, Tf/sd Double Card Slot 2.0 Protocol, Applicable For 256g Memory Cards, 5 Gbps Transfer Speed, Micro-usb Power Port, 900ma Output Max Current 5 Pieces Wired Keyboard 12 Fn Multimedia Hotkeys, Resolution: 1000 Dpi, 3 Buttons, Usb Port, Cable Length: 150 Cm 7 Pieces Wireless Mouse 1000 Dpi, 3 Buttons, 2d Scroll Wheel, 2.4 Ghz Wireless Connection, 2.4ghz Wireless Connection W/ Usb Nano Receiver, W/ 1 Aa Battery 170 Units 3-pin Power Adaptor Universal Adapter, Compatible With Various Types Of Sockets 12 Pieces Terms And Conditions: • All Items Which Have An Expiration Period Shall Have An Expiry Date Of At Least Two (2) Years After The Date Of The Notice Of Award • The Supplier Must Submit A Copy Of Manufacturer’s Product Brochures, Specification Sheet, Manuals Etc., As Appropriate Of All The Required Items Or Equipment. Any Of These Evidences Should Be Downloadable From Product Or Manufacturer’s Website Or Otherwise Verifiable By Any Means Reasonable And Acceptable To The Bids And Awards Committee. • Certificate That The Supplier Operates A Commercial Physical Store Indicating The Complete Address Where Ict Products Are Displayed And Available For Purchase. • All Items Should Be Genuine And Not Imitation Delivery Of The Goods Is Required Within 90 Calendar Days From Receipt Of Notice To Proceed And To Be Delivered At Da-wesviarc, Hamungaya, Buntatala, Jaro, Iloilo City. Bidders Should Have Completed, Within Three (3) Years (2021-present) From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. The Prospective Bidder Must Be Registered In The Philgeps. 4. Prospective Bidders May Obtain Further Information From Department Of Agriculture - Visayas And Inspect The Bidding Documents At The Address Given Below During Office Hours, 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 30, 2024 – January 22, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php5,000.00).the Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees To Be Presented In Person. 6. The Department Of Agriculture-western Visayas Will Hold A Pre-bid Conference At 9:30 P.m. On January 8, 2025 At The Rcpc Library, Rcpc Building, Da Wesviarc Compound, Brgy. Buntatala, Jaro, Iloilo City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before 9:30 A.m. On January 22, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In The Amount Of Any Of The Acceptable Forms And In The Amount Of Php74,847.78 (if The Bid Security Is In The Form Of Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit) Or Php187,119.45 (if The Bid Security Is In The Form Of Surety Bond). In Lieu Of A Bid Security, The Bidder May Submit A Duly Notarized Bid Securing Declaration That Is An Undertaking Which States, Among Others, That The Bidder Shall Enter Into Contract With The Procuring Entity And Furnish The Required Performance Security Within 10 Calendar Days From Receipt Of The Notice Of Award, And Committing To Pay The Corresponding Fine And Be Suspended For A Period Of Time From Being Qualified To Participate In Any Government Procurement Activity In The Event That It Violates Any Of The Conditions Stated Therein As Required In The Guidelines Issued By The Gppb. 9. Bid Opening Shall Be At 9:30 A.m. On January 22, 2025 At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agriculture-western Visayas Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. The Department Of Agriculture-western Visayas Does Not Condone Any Forms Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 12. For Further Information, Please Refer To: Zarlina B. Cuello Bac Chairperson Da-wesviarc Compound Brgy. Buntatala, Jaro, Iloilo City Tel. No. (033) 320-23-73 Www.westernvisayas.da.gov.ph Procurement@wv.da.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps December 30, 2024 Zarlina B. Cuello Bac Chairperson

Details: Description Procurement Of Inclusive Learning Resource Centers Assistive Devices, Equipment, Supplies And Materials (lot 3- Support Service Area: Physical Therapy Area) 1. The Deped Schools Division Of Eastern Samar, Through The General Appropriation Act Of 2024 Intends To Apply The Sum Of ₱ 359,916.00 Being The Abc To Payments Under The Contract For Procurement Of Inclusive Learning Resource Centers Assistive Devices, Equipment, Supplies And Materials (lot 3- Support Service Area: Physical Therapy Area) Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Deped Schools Division Of Eastern Samar Now Invites Bids For The Above Procurement Project. Bidders Should Have Completed, Within 5 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 4. Prospective Bidders May Obtain Further Information From Deped Schools Division Office Of Eastern Samar And Inspect The Bidding Documents At The Address Given Below During Monday-friday, 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Php 500.00. It May Also Be Downloaded From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Nonrefundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Deped Schools Division Of Eastern Samar Will Hold A Pre-bid Conference On January 13, 2025, 10:00am At The Bac Office, Deped Schools Division Of Eastern Samar Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before January 27, 2025, 9:00am Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 27, 2025, 10:00am At The Given Address Below Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Only The Proprietor Or Authorized Representative May Be Allowed To Purchase Bidding Documents. Letter Of Intent (loi), Special Power Of Attorney (spa) (for Authorized Representative), And Drl (document Request List From Philgeps) Are Required Upon Purchase. 11. The Deped Schools Division Of Eastern Samar Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Items, Specifications, Quantity Of Delivery, And Abc: Cabinet, 4' X 6' Double Door (3/4 Plyboard, Varnish Paint) Set 1 Wooden Cubicle Partition, 4 Panel Divider (l 70.25 Inches X H70.25 Inches X T0.75 Inches) Set 4 Mirror, Aluminum Frame (thickness 1/4 Inch X 4 X 8 Ft) Set 1 Filing Cabinet, Vertical Filing Cabinet In 2, 3 And 4 Drawers With Plastic Divider And Central Lock Heavy Duty Construction Assembles In Minutes Power Coated Finish Anti-tilt Mechanism Quiet Closing 3 Sectional Railings For Smooth Actions Central Locking System Unit 1 Learners'/clients' Chart Materials, High Quality Abs Body, Moulded Light Blue, Pink, Grey Color, Size: 340×230mm Unit 10 Anatomical Models, Brand New, High Quality, 1/2 Life Size Can Be Disassembled Into 27 Parts Hand Numbered With Key Guide Anatomically Accurate A Perfect Tool For Teaching/studying Human Muscular And Organs Anatomy Set 1 Blood Pressure, Product Details Type: Upper-arm Monitor Type: Digital Cuff Size: 32cm Dimension (w X H X D): 145 X 466 X 145mm Weight: 250g Technical Details Power Supply: Battery Battery Type: Li-polymer Features Smart App Availability: Yes Automatic Shut Off: No Low Battery Indicator: No Connection Bluetooth: No Wi-fi: No Unit 2 Stethoscope, Product Name: Dual Tube Stethoscope Weight: 185g Length: 80cm Product Material: Polymer Diaphram Listener Material: High-density Stainless Steel Product Composition: Eartip, Ear Hooks, Leaf Spring, Hose Heads, Diaphrams Unit 2 Tape Measure, Material: Pvc It Has Centimeter Scale On Reverse Side Which Is Up To 300cm Large, Easy To Read Marking Measures Up To 120 Inches Piece 2 Hand Dynamometer, Type: Electronic Counting Gripper Function: Comprehensive Fitness Exercise Material: Abs Size: 15cm/5.90"x10.5cm/4.13"x2cm/0.79" Piece 2 Ice Massage Caps, Size: 2 Count (pack Of 1) Measuring 2.9” In Diameter, The Ice Cup Massager Holder Also Fits Comfortably In The Hand. Material: Polyethylene Pack 3 Foam Rolls, Material: Expanded Polypropylene Foam Item Weight: 0.42 Pounds Size: 18 Inches Piece 4 Balance Board, Type: Rocker Board Dimensions: 32.28 X 11.81 X 0.59 Inches Weight Capacity: 100 Kg Material: Beech Wood Anti-skid Feature: Not Specified Unit 2 Treatment Table, Product Name: Multi Functions Physical Electric Therapy Treatment Table Size: L2040*w560*h550-820mm Product Feature 1. Electric Operation,3 Sections, New Design Epoxy Metal Frame. 2. Equipped With 3 Motors For Height, Back And Leg Rest Adjustment. 3. Height Adjustments For The Arm Rests. 4. With Artificial Leather Cover On The Head, Seat, Leg Areas. 5. 4 Luxurious Castors With Brake. Function: Suitable For Hospital Electric Therapy Treatment Table Use. Unit 1 Mat Table, Wood Construction Adds Strength And An Attractive Natural Finish. Supports Up To 500 Lbs For Better Patient Accommodation. Heavyweight Vinyl Upholstery Is Comfortable And Strong. Thick Foam Padding Provides Patient Comfort For A Better Experience. Five-leg Design With Center Support Ensures Stability Through Heavy Treatment. Height: 18" Weight Capacity: 500 Lbs Size: 4 Ft Wide X 7 Ft Long Unit 1 Adjustable Height Exercise Steps, Color: Teal/purple Brand: Us Weight Item Weight: 80 Ounces Item Dimensions Lxwxh: 30 X 15 X 8 Inches About This Item Made In The United States From Durable, Recyclable High-density Polyethylene Circuit-size (28. 5" L X 14. 5" W X 4" H) Aerobic Platform, 4 Original Risers, And Streaming Videos Platform Features Grooved, Nonslip Top And Supports Up To 275 Lbs Four Nonskid Feet On Each Riser And Platform Prevents Sliding Or Scratching Floors Vary Workout Difficulty By Adjusting Platform Height From 4" To 6" To 8" Using Risers Unit 1 Pediatric Examination Gowns, Opening: Full Open Back Style: Child Size Color: Jellybean Print Made With High Quality, 100% Cotton Comfortable, Durable, Washable, And Reusable Hook And Loop Closures At Neck And Mid-back Piece 5 Towels, Material: High Quality 100% Cotton Terry – 500gm2. Size: 90 X 180cm. Piece 10 Bed Sheets, Waterproof 5.5 Mil Vinyl Contoured Corners, Fitted 36" X 80" X 6" Case Of 12 Pack 5 Pillows, Pillow Shape: Rectangle Pillow Weight: 0.95-1000 Grams Pillow Height: 12.7cm Pillow Width: 40.64cm Pillow Length: 66.04cm Pillow Size: 40 X 66 Cm Pillow Material: 100% Cotton Pillow Filing: Cotton Poly-fiber Piece 4 Pillowcase, 2pcs Pillowcase Size: 1 X 28 Inches Material: Cotton & Polyester Set 10 Blankets, 100% Canadian Cotton, Soft Texture, High Quality Fabric Size: 52 X 90 Inch Piece 10 Step Stools, Double Steel Caravan Step. Rubber Non- Slip Steps. Leg Distance Front To Back 65 Cm. Width 42 Cm. Top Step Height 38 Cm. Bottom Step 20 Cm. Unit 2 Therapist Stools On Wheels, Description: This Stool Can Be Adjusted To Just About Any Position You Want, Making It Incredibly Versatile And Comfortable. It Has A 360-degree Swivel So You Can Quickly Spin Around To Access Anything You Need At Home Or In The Office. The Unique Saddle Seat Has Thick Padding, Making It Easy For You To Stay In The Same Place For Hours At A Time. Unit 2 Wedge Bolsters, Use A Wedge Bolster Along With Our Quicklock Face Rest Platform To Create A Quick And Easy Backrest For Any Portable Or Stationary Massage Table. Dimensions: 24"w X 10"h X 24"l With A Flat Top And A 36" Incline. Piece 1 Round Bolsters, 6" Round Bolster Bolsters Are Made With Earth Friendly Materials Of Cfc Free Foam And Pvc Free Upholstery Choices. High Quality Foam Offers Comfortable Support And Allows Clients To Fully Relax, And Come With Pull Handles At Both Ends For Therapist Convenience. Unlimited Versatility Makes This Comfortable And Supportive Cushion Your Building Block For Positioning. Measures 6" D X 26" L. Made Of Aero-cel Foam: Won't Flatten Or Get Lumpy Like Dacron Bolsters Incredibly Supple Conforms To Fit Curves Firm Gentle Support Piece 1 Core Peak Bolsters, Core Peak Bolster Peaked Shape Fits Comfortably Under Your Knees Precision-cut Foam 10" X 24", With 7" Peak Available In Blue, Gray, Or Black Piece 1 Mobilization Belts And Devices Features: Long Enough To Meet Your Needs: The Strap Belt For Mobilization Measures About 8.2 Feet Long, Enough To Meet Your Using Needs On Leg And Shoulder Stretch, Dancing Training, Yoga, Hop And Waist Support, Arm Movement And So On. Adjustable And Portable: The Yoga Belt With Buckle Comes With An Adjustable Buckle, Allowing You To Adjust The Length Of The Belt To Get A Desired Length, And You Can Easily Carry And Store The Belt, Without Taking Up Too Much Space. Specifications: Main Material: Nylon Color: Blue Size: Approx. 8.2 Feet In Length, About 2 Inches In Width Piece 5 Gait Belt Features: This Transfer Belt Is Designed With A Buckle, Which Can Be Adjusted According To Your Needs Without Worrying About Being Too Loose Or Too Tight. This Gait Belt Metal Buckle Has Reliable Materials, Smooth Surface And Lightweight Structure, Which Is Convenient For Long-term Use And Storage. Specifications: Material: Vinyl Color: Black Size: 60 X 2 Inches Piece 5 Kinesiology Tape, Ultra-strong And Sticky-hypoallergenic Adhesive Water Resistant 97% Cotton, 3% Nylon 180% Stretch For Full Range Of Motion Latex And Zinc Free Sticks 2-7 Days 5-10 Applications Per Roll Each Is 2"x 16.4" (5cmx5cm) Piece 5 Splinting Materials, Rescue Padded Board Splint 6 Paddes Wood Splint (different Sizes) Sizes: 35", 25" And 15" Velcro Straps Color: Blue Set 2 Paraffin Bath, Bath Arm, Hand And Foot Usage: Wax Fomentation Condition: New Voltage: 220v Ac Power:2 Kw Tank Size: 50cm X 35cm X 25cm Deep Unit 1 Dumbells Sets, Product Name: Dumbbell Set Dimension: 810 × 525 × 765mm (excluding Dumbbells) Weight: 37kg Sandbags Qty: 18 Pcs With Different Weight Sandbags Weight: 1lb, 2lbs, 3lbs, 4lbs, 5lbs Type: Medical Rehabilitation Equipment Function: Used For Whole Body Rehabilitation Training Total 18 Dumbbells 1 Lb / Piece, 2 Pieces 2 Lbs / Piece, 4 Pieces 3 Lbs / Piece, 4 Pieces 4 Lbs / Piece, 4 Pieces 5 Lbs / Piece, 4 Pieces Set 1 Theraband, Brand: Theraband Material: Rubber Color: Blue/black Sport Type: Exercise And Fitness/pilates Heavy Set Includes The Fifth And Sixth Of Eight Levels Of Latex Resistance Tubes, Blue, 100%, 5.8 Lbs., 200%, 8.6 Lbs., Black, 100%, 7.3 Lbs., 200%, 10.2 Lbs. Set 4 Goniometers, Protractro Goniometer With 360 Degrees Coverage To Measure Joint And Compare The Changes In Joint Angles Material: Clear Plastic 3 Gonimeter: 12 Inch, 8 Inch And 6 Inch Set 2 Reflex Nuero Hammer, Features: The Pointed Babinski-style Tip At The Base Of The Handle Elicits Superficial Or Cutaneous Responses, Including Plantar And Abdominal Reflexes. Multi-function Double-headed Percussion Hammer For Tapping On Various Parts Of The Patient To Check Nerve Response. Ergonomic Handle Design Make The Percussion Hammers Light And Easier To Use. Weight Balanced Hammer, With Two Soft Rubber Heads, A Large And A Small Hammerhead For Accurate Knocking. Zinc Alloy Comfortable Handle Grip Control, Hammer For High Elastic Pvc Rubber Material: Zinc Alloy + Pvc Color: Black Package Size: 27*11*3.5cm/10.6*4.3*1.3 Inch Package Weight: 140g/4.9oz Piece 2 Thermometer, 1 Second Measuring Time 3 Color Backlight Fever Reminder Auto Shut Off At 18 Seconds Store 50 Sets Of Data Body Temperature Measurement: 34.0-42.9°c / 93.2-109.2°f Surface Temperature Measurement: 0-100°c / 32-212°f Material: Abs Plastic Display Resolution: 0.1°c(0.1°f) Measuring Distance: 1~5cm (0.4~2in) Accuracy: (+/-)0.2°c Auto-shutdown Time: About 18s Power Supply: 2 * 1.5v Aaa Batteries (not Included) 1 Year Warranty Unit 1 Multiple Mode Electrical Stimulator Specification: Dimension: 170 X 60 X 26 (mm) Channel: Two Independent Channels Power Supply: 9v Battery X 1 Pcs Output: 0~100ma P To P Into 500ω Load Density(intensity): Change Of 15 Steps Pulse Amplitude Timer: 30 Minutes Countdown Timer With Auto Off Wave For Dual Phases Square Wave Display: Lcd Display With Timer/mode/density (“density”=intensity) Mode: 10 Programs, P1~p5 Tens, P6~p0 Fitness Ems Ramp Up: 3 Seconds Buzzer: 2 Different Reminders 1.correct: Single Beep 2.caution: Long Beep Pulse Wave Form Low Frequency Stimulator Low Frequency Stimulator Standard Accessories: Electrical Stimulator 1 Stimulator Lead Wire 2 Self Adhering Electrode 4 Operating Manual 1 9v Battery 1 Reusable Package Box 1 Unit 2 Abc = 359,916.00

Details: Combined Synopsis/solicitation Notice combined Synopsis/solicitation Notice page 3 Of 11 combined Synopsis/solicitation Notice *= Required Field combined Synopsis/solicitation Notice page 1 Of 9 description combined Synopsis/solicitation Notice combined Synopsis/solicitation Notice page 11 Of 11 combined Synopsis/solicitation Notice *= Required Field combined Synopsis/solicitation Notice page 1 Of 10 page 1 Of this Is A Combined Synopsis/solicitation For Commercial Products Prepared In Accordance With The Format In Federal Acquisition Regulation (far) Subpart 12.6, Streamlined Procedures For Evaluation And Solicitation For Commercial Products, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested, And A Written Solicitation Document Will Not Be Issued. this Is A Brand Name Or Equal To Request For Quote (rfq), And The Solicitation Number Is 36c26025q0159. The Government Anticipates Awarding A Firm-fixed Price Supply Order From This Solicitation. this Is A Solicitation For A Smart Mattress, Base Frame, Mattress Cover, Remote And Set-up. The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular Fac 2025-02 January 3, 2025. this Solicitation Is An Unrestricted Open Market Solicitation. The Associated North American Industrial Classification System (naics) Code For This Procurement Is 337910, With A Small Business Size Standard Of 1000 Or Fewer Employees, And The Psc Is 6530. all Interested Companies Shall Provide Quotations That Are Brand Name Or Equal To Sleep Number As Follows: quantity manufacturer Part description 6 i2p5 sleep Number New P5 360 Queen Smart Mattress 60 X80 6 sleep Number New Flexfit 2 Queen Bed Base 6 424201 sleep Number Total Encasement Mattress Cover For Smart Beds Queen 6 126016 sleep Number New Smart Remote Compatible With Mattress And Frame 1 sleep Number Half Day Delivery Install Set Up standard Warranty Shall Apply To All Parts Listed. A 15 Year Warranty Is Desired. must Meet All Required Federal Mandates For Medical Use. salient Characteristics queen Smart Mattress: 60 X 80 weight Capacity: Supports Up To 550 Lb. adjustable Firmness includes Air Hoses And A Power Supply To In/deflate Mattress power Supply Compatible With A 100 240 Vac Grounded Wall Socket must Be Compatible With Adjustable Base breathable queen Bed Base: weight Capacity: Can Support A Working Load Of Mattress, Mattress Cover, System Hardware And An Additional 550 Lb adjustable To Multiple Positions, Including Supine To Upright Head Position And Varied Levels Of Foot Positions. designed For And Supports Queen Mattress includes An Electric Control System, Power Cord Connections And Cables total Encasement Mattress Cover: washable, Zippered Cover Fully Encases Mattress And Hose Openings. waterproof And Will Block Bed Bugs, Dust Mites And Allergens smart Remote: hand Control That Adjusts Firmness Of Mattress And The Position Of The Base (hardwired To The Bed Is Desired, But Not Required) compatible With Smart Frame And Mattress delivery/install Set-up: deliver And Assemble Complete Bed Packages To Va Medical Center American Lake Sleep Lab, Set Up Beds In Designated Rooms And Haul Away Packaging, Old Mattresses And Frames coordinate With Poc At Sleep Lab For Delivery Times 52.211-6â brand Name Or Equal. as Prescribed Inâ 11.107(a), Insert The Following Provision: brand Name Or Equalâ (aug 1999) (a)â if An Item In Thisâ solicitationâ is Identified As "brand Name Or Equal," The Purchase Description Reflects The Characteristics And Level Of Quality That Will Satisfy The Government S Needs. The Salient Physical, Functional, Or Performance Characteristics That "equal"â productsâ mustâ meet Are Specified In Theâ solicitation. (b)â to Be Considered For Award,â offersâ of "equal"â products, Including "equal"â productsâ of The Brand Name Manufacturer,â must- (1)â meet The Salient Physical, Functional, Or Performance Characteristic Specified In Thisâ solicitation; (2)â clearly Identify The Item By- (i)â brand Name, If Any; And (ii)â make Or Model Number; (3)â includeâ descriptive Literatureâ such As Illustrations, Drawings, Or A Clear Reference To Previously Furnished Descriptive Data Or Information Available To Theâ contracting Officer; And (4)â clearly Describe Any Modifications Theâ offerorâ plans To Make In A Product To Make It Conform To Theâ solicitationâ requirements. Mark Any Descriptive Material To Clearly Show The Modifications. (c)â theâ contracting Officerâ will Evaluate "equal"â productsâ on The Basis Of Information Furnished By Theâ offerorâ or Identified In Theâ offerâ and Reasonably Available To Theâ contracting Officer. Theâ contracting Officerâ is Not Responsible For Locating Or Obtaining Any Information Not Identified In Theâ offer. (d)â unless Theâ offerorâ clearly Indicates In Itsâ offerâ that The Product Being Offered Is An "equal" Product, Theâ offerorâ shallâ provide The Brand Name Product Referenced In Theâ solicitation. (end Of Provision) delivery Fob Destination Is Preferred, 30-60 Days After Receipt Of Order. All Deliveries Will Be Coordinated With The Puget Sound Va Medical Center Point Of Contact. place Of Delivery: department Of Veterans Affairs va Puget Sound american Lake Medical Center 9600 Veterans Dr. tacoma, Wa 98493 . the 6 Rooms Within The Sleep Lab Located At The American Lake Campus: Room Numbers Are 301,303,304,305,306,307. the Full Text Of Far Provisions Or Clauses May Be Accessed Electronically At Http://acquisition.gov/comp/far/index.html http://www.va.gov/oal/library/vaar/index.asp the Following Solicitation Provisions Apply To This Acquisition: far 52.212-1, Instructions To Offerors Commercial Products addendum To Far 52.212-1 Instructions To Offerors Commercial 52.204-7 system For Award Management (oct 2018) 52.204-16 commercial And Government Entity Code Reporting (aug 2020) 52.204-24 representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment (nov 2021) 52.211-6 brand Name Or Equal (aug 1999) 52.212-3 offeror Representations And Certifications-commercial Products And Commercial Services (may 2024) 52.225-2 buy American Certificate (oct 2022) 52.252-1 provisions Incorporated By Reference (feb 1998) vaar Provisions: 852.239-75 information And Communication Technology Accessibility Notice (feb 2023) (a) Gray Market Items Are Original Equipment Manufacturers (oem) Goods Sold Through Unauthorized Channels In Direct Competition With Authorized Distributors. This Procurement Is For New Oem Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment (i.e., Replacement Parts) For Va Medical Centers. No Remanufactures Or Gray Market Items Will Be Acceptable. (b) Offeror Shall Be An Oem, Authorized Dealer, Authorized Distributor Or Authorized Reseller For The Proposed Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment (i.e., Replacement Parts), Verified By An Authorization Letter Or Other Documents From The Oem, Such That The Oem S Warranty And Service Are Provided And Maintained By The Oem. All Software Licensing, Warranty And Service Associated With The Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment Shall Be In Accordance With The Oem Terms And Conditions. (c) The Delivery Of Gray Market Items To The Va In The Fulfillment Of An Order/award Constitutes A Breach Of Contract. Accordingly, The Va Reserves The Right Enforce Any Of Its Contractual Remedies. This Includes Termination Of The Contract Or, Solely At The Va S Election, Allowing The Vendor To Replace, At No Cost To The Government, Any Remanufactured Or Gray Market Item(s) Delivered To A Va Medical Facility Upon Discovery Of Such Items. (d) Any Award Made As A Result Of This Solicitation Will Be Made On An All Or Nothing Basis. (e) Offerors Are Warned Against Contacting Any Va Personnel Other Than The Contracting Officer And Contract Specialist Prior To Placement Of Any Award Made Resulting From This Rfq. If Such Contact Occurs And Found To Be Prejudicial To Competing Contractors, The Offeror Making Such Contact May Be Excluded From Award Considerations. (f) All Proprietary Information Shall Be Clearly And Properly Marked. If The Offeror Submits Annexes, Documentation, Attachments, Or The Like, Not Specifically Required By This Solicitation, Such Will Count Against The Offeror S Page Limitations Unless Otherwise Indicated In The Specific Volume Instructions Below. (g) All Information Shall Be Confined To The Appropriate File. The Offeror Shall Confine Submissions To Essential Matters, Sufficient To Define The Quote And Provide An Adequate Basis For Evaluation. Offerors Are Responsible For Including Sufficient Details, In A Concise Manner, To Permit A Complete And Accurate Evaluation Of Each Quote. (end Of Addendum To 52.212-1) far 52.212-2, Evaluation-commercial Items : The Government May Award A Contract Resulting From This Solicitation To The Responsible Offeror Whose Offer Conforming To The Solicitation Will Be Most Advantageous To The Government, Price And Other Factors Considered. In Accordance With Far 9.104-2, The Special Standards Of Responsibility Described Below Apply To This Procurement. Offerors Who Fail To Meet Any Special Standards Of Responsibility Will Not Be Eligible To Receive Contract Award. The Following Factors Shall Be Used To Evaluate Offers: special Standards Of Responsibility: (per Far 9.104-2) The Following Special Standards Of Responsibility Apply To This Procurement: sp1: Offeror Must Be A Manufacturer Authorized Provider For The Items Provided. A Letter From The Manufacturer Stating Such Must Be Included With Any Response To This Solicitation. price (a) A Written Notice Of Award Or Acceptance Of An Offer, Mailed Or Otherwise Furnished To The Successful Offeror Within The Time For Acceptance Specified In The Offer, Shall Result In A Binding Contract Without Further Action By Either Party. Before The Offeror's Specified Expiration Time, The Government May Accept An Offer (or Part Of An Offer), Whether Or Not There Are Negotiations After Its Receipt, Unless A Written Notice Of Withdrawal Is Received Before Award. far 52.213-3 Offerors Are Advised To Include A Completed Copy Of The Provision At 52.212-3, Offeror Representations And Certifications -- Commercial Items, With Its Offer If Has Not Been Completed On Sam.gov. Offerors Must Complete Annual Representations And Certifications Electronically Via The System For Award Management (sam) Website Located At Https://www.sam.gov/portal In Accordance With Far 52.212-3, Offerors Representations And Certifications Commercial Items. If Paragraph (j) Of The Provision Is Applicable, A Written Submission Is Required. all Service-disabled Veteran Owned Businesses Or Veteran Owned Businesses Must Be Registered/certified With The U.s Small Business Administration At Veteran Small Business Certification Veteran Small Business Certification (sba.gov). the Following Contract Clauses Apply To This Acquisition: far 52.212-4, Contract Terms And Conditions Commercial Products (oct 2018) addendum To Far 52.212-4 The Following Clauses Are Included As A Part Of The Addendum: http://www.acquisition.gov/far/index.html (far) http://www.va.gov/oal/library/vaar/index.asp (vaar) 52.203-17 contractor Employee Whistleblower Rights (nov 2023) 52.204-13 system For Award Management Maintenance (oct 2018) 52.204-18 commercial And Government Entity Code Maintenance (aug 2020) 52.219-6 notice Of Total Small Business Set-aside (nov 2020) (15 U.s.c. 644) 52.225-1 (buy American Supplies) 52.232-40 providing Accelerated Payments To Small Business Subcontractors (dec 2013) 52.233-3 protest After Award (aug 1996) (31 U.s.c. 3553). 52.252-2 clauses Incorporated By Reference (feb 1998) vaar Clauses: 852.203-70 commercial Advertising (may 2018) 852.212-71 gray Market Items (nov 2018) 852.232-72 electronic Submission Of Payment Requests (nov 2018) 852.239-76 information And Communication Technology Accessibility (feb 2023) 852.242-71 administrative Contracting Officer (oct 2020) 852.246-71 rejected Goods (oct 2018) 852.247-73 packing For Domestic Shipment (oct 2018) far 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders Commercial Products (mar 2023) the Following Subparagraphs Of Far 52.212-5 Are Applicable And Incorporated By Reference: 52.204-10 52.204-27 reporting Executive Compensation & First-tier Subcontract Awards (jun 2020) (pub. L. 109-282) (31 U.s.c. 6101 Note) prohibition On A Bytedance Covered Application (jun 2023) (section 102 Of Division R Of Pub. L. 117-328) 52.209-6 protecting The Government S Interest When Subcontracting With Contractors Debarred, Suspended, Or Proposed For Debarment (nov 2021) (31 U.s.c. 6101 Note) 52.219-6 notice Of Total Small Business Set-aside (nov 2020) (15 U.s.c. 644). 52.219-28 52.219-27 post Award Small Business Program Representation (mar 2023) (15 U.s.c 632(a)(2)) notice Of Service-disabled Veteran-owned Small Business Set-aside (oct 2022) 52.222-3 52.222-19 convict Labor (jun 2003) (e.o. 11755) child Labor Cooperation With Authorities And Remedies (feb 2024) (e.o. 13126) 52.222-21 prohibition Of Segregated Facilities (apr 2015) 52.222-26 equal Opportunity (sep 2016) (e.o. 11246) 52.222-36 equal Opportunity For Workers With Disabilities (jun 2020) (29 U.s.c. 793) 52.222-50 combating Trafficking In Persons (nov 2021) (22 U.s.c. Chapter 78 And E.o. 13627) 52.223-18 encouraging Contractor Policies To Ban Text Messaging While Driving (jun 2020) (e.o. 13513) 52.225-1 buy American-supplies (oct 2022) (41 U.s.c. Chapter 83) 52.225-13 restrictions On Certain Foreign Purchases (feb 2021) (e.o.'s, Proclamations, And Statutes Administered By The Office Of Foreign Assets Control Of The Department Of The Treasury) 52.226-8 encouraging Contractor Policies To Ban Text Messaging While Drivingâ (mayâ 2024)â  52.232-33 payment By Electronic Funds Transfer System For Award Management (jul 2018) (31 U.s.c. 3332) 52.240-1 prohibition On Unmanned Aircraft Systems Manufactured Or Assembled By American Security Drone Act-covered Foreign Entities (nov 2024) (sections 1821-1826, Pub. L. 118-31, 41 U.s.c. 3901 Note Prec.) all Quoters Shall Submit According To The Following: quotes Must Be Emailed To Rachel.richardson@va.gov And Received No Later Than 3:00 Pm Pst On 01/08/2025. Quotes May Be Submitted On This Document Or The Vendor S Own Form And Must Include, If Not The Manufacturer, An Authorized Distributor Letter, And A Completed Buy American Certificate. Any Offer That Does Not Provide The Supporting Documentation May Be Considered Non-responsive. Required Supporting Documentation And Information: authorized Distributor Letter If Not The Manufacturer completed Buy American Certificate certification That Equipment Meets/exceeds The Salient Characteristics Of The Desired Brand Above delivery Date warranty Details the Government Intends To Make Award Without Discussions. for Information Regarding The Solicitation, Please Contact Rachel Richardson At Rachel.richardson@va.gov. (end Of Provision) mandatory Electronic Invoicing va Published The Final Rule Requiring Vendors To Submit Invoices Electronically To The Financial Services Center (fsc) In The November 27, 2012 Federal Register. The Rule Became Effective December27,2012.the Rule Includes A New Contract Clause To Be Inserted In All Solicitations And Contracts By The Contracting Officer (vaar 852.232-72). Vendors Can Comply With The Rule By Using Either Of The Two Methods Below: facsimile, E-mail, And Scanned Documents Are Not Acceptable Forms Of Submission For Payment Requests. Electronic Form Means An Automated System Transmitting Information Electronically According To The Accepted Electronic Data Transmission Methods Below: va S Electronic Invoice Presentment And Payment System The Fsc Uses A Third-party Contractor, Tungsten, To Transition Vendors From Paper To Electronic Invoice Submission. Please Go To This Website:http://www.tungsten-network.com/us/en/veterans-affairs/to Begin Submitting Electronic Invoices, Free Of Charge. a System That Conforms To The X12 Electronic Data Interchange (edi) Formats Established Bythe Accredited Standards Center (asc) Chartered By The American National Standards Institute (ansi). The X12 Edi Web Site (http://www.x12.org). vendor E-invoice Set-up Information: please Contact Tungsten At The Phone Number Or Email Address Listed Below To Begin Submitting Your Electronic Invoices To The Va Financial Services Center For Payment Processing, Free Of Charge. If You Have Question About The E-invoicing Program Or Tungsten, Please Contact The Fsc At The Phone Number Or Email Address Listed Below: tungstene-invoicesetupinformation:1-877-489-6135 tungstene-invoiceemail:va.registration@tungsten-network.com fsce-invoicecontactinformation:1-877-353-9791 fsce-invoiceemail:vafsccshd@va.gov

Details: Description Quantity Unit Description Unit Cost Total Cost 1,289 Pieces Ballpen, Black 7.00 9,023.00 269 Pieces Ballpen, Blue 7.00 1,883.00 57 Pieces Ballpen, Green 7.00 399.00 150 Pieces Ballpen, Red 7.00 1,050.00 230 Pieces Battery Aa, Black 30.00 6,900.00 150 Pieces Battery Aaa 38.00 5,700.00 67 Pieces Battery Meduim 60.00 4,020.00 6 Box Binder Clips 1.12", 12's 44.00 264.00 5 Box Binder Clips 1-5/8", 12's 52.00 260.00 7 Box Binder Clips 2", 12's 66.00 462.00 4 Ream Bondpaper Light Blue , Short Subs. 18 375.00 1,500.00 4 Ream Bondpaper Light Yellow, Short, Sub. 18 375.00 1,500.00 9 Ream Bondpaper, A3, Sub. 20 400.00 3,600.00 348 Ream Bondpaper, A4, Sub. 20 230.00 80,040.00 16 Ream Bondpaper, Long, Green, Subs. 18 375.00 6,000.00 40 Ream Bondpaper, Long, Pink Sub. 18 375.00 15,000.00 927 Ream Bondpaper, Long, Sub. 20 255.00 236,385.00 957 Ream Bondpaper, Short, Sub. 20 220.00 210,540.00 43 Pieces Calculator, 12 Digits (battery Operated) 553.00 23,779.00 9 Box Carbon Paper, Blue, Long, 100's 600.00 5,400.00 480 Pieces Cartolina Pink 8.00 3,840.00 300 Pieces Cartolina -white 8.00 2,400.00 150 Pieces Cartolina Yellow 8.00 1,200.00 50 Pieces Cartolina, Blue (light Blue) 8.00 400.00 200 Pieces Cartolina, Green (light Green) 8.00 1,600.00 400 Pieces Cartolina, Light Red 8.00 3,200.00 2 Roll Cellophane Cover, 49" X 50 Meters 2,500.00 5,000.00 145 Roll Cellophane Tape 1" 28.00 4,060.00 127 Roll Cellophane Tape 2" 32.00 4,064.00 56 Pieces Certificate Holder, Plastic, A4 65.00 3,640.00 150 Pieces Certificate Holder, Plastic, Long Size 70.00 10,500.00 16 Pieces Certificate Holder, Plastic, Short 60.00 960.00 2 Pack Clear Sheets, (binding Cover - Vinyl Type Long 100's) 1,200.00 2,400.00 17 Pieces Clearbook Long, Blue 250.00 4,250.00 322 Pieces Clearbook, Long Green 250.00 80,500.00 4 Pieces Clearbook, Long, Yellow 250.00 1,000.00 48 Pieces Clip Board, Long 100.00 4,800.00 40 Pieces Clip Bulldog Big 48.00 1,920.00 27 Pieces Clip Bulldog Small 30.00 810.00 4 Pieces Columnar Notebook, 12 Columns 60.00 240.00 30 Pack Construction Paper, Assorted, Long, 10's 40.00 1,200.00 1 Pieces Cork Board W/ Metal Frame , 2x3 Feet Hanging 1,300.00 1,300.00 18 Pieces Cork Board W/ Metal Frame 36 X 30 Inches 2,000.00 36,000.00 24 Pieces Cork Board W/ Metal Frame, 4x3 Inches 1,500.00 36,000.00 4 Pieces Cork Board, 60 X 90 Cm 1,900.00 7,600.00 9 Pieces Cutter, Heavy Duty 18mm 56.00 504.00 245 Pieces Dataman, Long, Black 100.00 24,500.00 9 Pieces Dater, Month And Number 150.00 1,350.00 8 Roll Document Repair Tape, 1" X 35ft, Acid Free 2,100.00 16,800.00 120 Pieces Document Storage Boxes, 40cmx32x2 210.00 25,200.00 29 Roll Double Sided Tape 2" 50.00 1,450.00 48 Roll Double Sided Tape, 1" 40.00 1,920.00 10 Pieces Duct Tape, 2" 130.00 1,300.00 1,500 Pieces Envelope Brown - Long 5.00 7,500.00 124 Pieces Envelope, Expanded, Brown, Long 45.00 5,580.00 12 Pieces Envelope, Expanded, Green, Long 45.00 540.00 19 Box Envelope, White, Long, For Mailing, 100's 370.00 7,030.00 17 Pieces Eraser - Rubber 32.00 544.00 72 Pieces Expanded Folder, Long, Blue 45.00 3,240.00 61 Pieces Expanded Folder, Long, Green 45.00 2,745.00 180 Pack File Insert For Binder, A4, 10's 55.00 9,900.00 4 Pack File Inserts For Binder, Long, 10's 75.00 300.00 4 Pack File Jacket Folder Long, 10's 85.00 340.00 28 Pieces File Tray, 4 Layers Metal 650.00 18,200.00 10 Pieces File Tray. 3 Layers, Metal 600.00 6,000.00 3 Pieces Flag Philippines 350.00 1,050.00 10 Pieces Flash Drive 32gb 850.00 8,500.00 10 Pieces Flash Drive, 16gb 750.00 7,500.00 6 Ream Folder Long, Blue, 100's 850.00 5,100.00 109 Ream Folder Long, White 745.00 81,205.00 6 Ream Folder, Long, Red, 100's 850.00 5,100.00 6 Ream Folder, Long, Green, 100's 850.00 5,100.00 10 Ream Folder, Long, Orange, 100's 850.00 8,500.00 2 Ream Folder, Long, Yellow, 100's 850.00 1,700.00 40 Ream Folder, Short, White, 100's 400.00 16,000.00 69 Bottle Glue 130ml. 70.00 4,830.00 3 Pieces Glue Gun- 60w 250.00 750.00 60 Pieces Glue Stick 20.00 1,200.00 8 Bottle Glue, 40ml 55.00 440.00 57 Pieces Highlighter, Assorted Colors 70.00 3,990.00 16 Pack Index Card, 5x8, 100's 100.00 1,600.00 4 Box Index Tab 170.00 680.00 106 Bottle Ink Continouos T6641 - Black 345.00 36,570.00 40 Bottle Ink Continouos T6642 - Cyan 345.00 13,800.00 40 Bottle Ink Continouos T6643 - Magenta 345.00 13,800.00 40 Bottle Ink Continouos T6644 - Yellow 345.00 13,800.00 39 Bottle Ink Marking Pen 30ml, Black 85.00 3,315.00 8 Bottle Ink Stamping Pad, 30ml, Purple 90.00 720.00 1 Bottle Ink Stamping Pad, 30ml, Red 90.00 90.00 265 Bottle Ink, Brother, Bt-5000bk 430.00 113,950.00 257 Bottle Ink, Brother, Bt-5000c 430.00 110,510.00 256 Bottle Ink, Brother, Bt-5000m 430.00 110,080.00 248 Bottle Ink, Brother, Bt-5000y 430.00 106,640.00 144 Bottle Ink, Brother, D-60bk 430.00 61,920.00 80 Bottle Ink, Continuous, 003-black 350.00 28,000.00 40 Bottle Ink, Continuous, 003-cyan 300.00 12,000.00 40 Bottle Ink, Continuous, 003-magenta 300.00 12,000.00 40 Bottle Ink, Continuous, 003-yellow 300.00 12,000.00 10 Cart Ink, Hp 682 Black 560.00 5,600.00 8 Bottle Ink, Marking Pen, 30ml, Blue 85.00 680.00 3 Bottle Ink, Marking Pen, 30ml, Red 85.00 255.00 8 Bottle Ink, Whiteboard Marker, Black 150.00 1,200.00 20 Pieces Lever Arch File Folder Binder 3" Long 250.00 5,000.00 8 Pieces Manila Paper 12.00 96.00 67 Pieces Marking Pen, Black, Broad 50.00 3,350.00 189 Pieces Marking Pen, Black, Fine 55.00 10,395.00 15 Pieces Marking Pen, Blue, Broad 50.00 750.00 26 Pieces Marking Pen, Blue, Fine 55.00 1,430.00 473 Roll Masking Tape 1" 45.00 21,285.00 74 Roll Masking Tape 2" 50.00 3,700.00 550 Ream Mimeographing Paper Long, Sub. 20 235.00 129,250.00 550 Ream Mimeographing Paper Short, Sub. 20 200.00 110,000.00 360 Pieces Non-smudge, Retractable Ball Point Pen, 0.5mm Tip, High Quality, Black 20.00 7,200.00 320 Pieces Non-smudge, Retractable Ball Point Pen, 0.5mm Tip, High Quality, Blue 20.00 6,400.00 80 Pieces Non-smudge, Retractable Ball Point Pen, 0.5mm Tip, High Quality, Red 20.00 1,600.00 60 Roll Packaging Tape 2 30.00 1,800.00 171 Box Paper Clip, Gem Type, Jumbo, Vinyl Coated, 100's 35.00 5,985.00 17 Box Paper Clip, Gem Type, Small, Vinyl Coated, 100's 20.00 340.00 9 Pieces Paper Cutter Metal And Wood Base, A4,a3,a5,b4,b5 800.00 7,200.00 184 Box Paper Fastener Plastic, Regular 95.00 17,480.00 9 Box Paper Fastener, Metal 65.00 585.00 32 Box Paper Fastener, Plastic, Long 100.00 3,200.00 8 Jar Paste, 200g, Jar 70.00 560.00 307 Pieces Pencil No. 2 7.00 2,149.00 6 Pieces Pencil Sharpener, Desktop, Manual, Heavy Duty 20.00 120.00 4 Pieces Pencil Sharpener, Heavy Duty 10.00 40.00 32 Pieces Permanent Marker, Fine Point, Smear, Water And Fade Resistant, Black 55.00 1,760.00 32 Pieces Permanent Marker, Fine Point, Smear, Water And Fade Resistant, Blue 55.00 1,760.00 80 Pieces Permanent Marker, Ultra Fine Point, Smear, Water And Fade Resistant, Black 40.00 3,200.00 80 Pieces Permanent Marker, Ultra Fine Point, Smear, Water And Fade Resistant, Blue 40.00 3,200.00 3 Pack Photo Paper, Short, 10's 475.00 1,425.00 64 Pack Photopaper, A4, Glossy, 20's 500.00 32,000.00 116 Pieces Picture Frame A4 105.00 12,180.00 36 Pieces Picture Frame Legal Size 170.00 6,120.00 10 Pieces Picture Frame Letter Size 150.00 1,500.00 4 Pieces Plastic Cover 5m Cut Size 75.00 300.00 8 Pieces Plastic Envelope, Long 25.00 200.00 4 Pack Plastic Keychain Tag W/ Split Ring Label (blue), 10' 70.00 280.00 4 Pack Plastic Keychain Tag W/ Split Ring Label (green), 10's 70.00 280.00 4 Pack Plastic Keychain Tag W/ Split Ring Label (red), 10's 70.00 280.00 4 Pack Plastic Keychain Tag W/ Split Ring Label (white), 10's 70.00 280.00 4 Pack Plastic Keychain Tag W/ Split Ring Label (yellow), 10's 70.00 280.00 16 Box Post Pins 100's/box 79.00 1,264.00 4 Pieces Power Point Pen 1,000.00 4,000.00 8 Pieces Presentation Binder, A4 140.00 1,120.00 8 Pieces Presentation Binder, Refill, A4 5.75 46.00 1 Pieces Price Tag Gun, 8 Digit 200.00 200.00 8 Pack Price Tag Sticker, Orange Color, For Glass Slide, 10's 200.00 1,600.00 37 Unit Puncher, Heavy Duty 2 Hole 350.00 12,950.00 3 Pole Pvc Binding Element 84 X 25mm 25.00 75.00 3 Pole Pvc Binding Element 84x12mm 135.00 405.00 111 Pieces Record Book Hardbound 300 Pages 450.00 49,950.00 128 Pieces Record Book Hardbound 500 Pages 600.00 76,800.00 9 Pieces Record Book Ordinary 300 Pages 200.00 1,800.00 12 Pieces Record Book Ordinary 500 Pages 130.00 1,560.00 8 Roll Ribbon, Satin, 2cm Width, 25 Yrds Per Roll 180.00 1,440.00 8 Roll Ribbon, Wooven, 2cm, 7 Yrds Per Roll 300.00 2,400.00 1 Pieces Ring Binder - Comb/plastic, Short, 100' 165.00 165.00 1 Pieces Ring Binder, A4, 12mm, 100's 250.00 250.00 1 Pieces Ring Binder, A4, 16mm, 100's 290.00 290.00 1 Pieces Ring Binder, Comb/plastic, A4, 100's 180.00 180.00 1 Pieces Ring Binder, Comb/plastic, Long, 100's 210.00 210.00 37 Box Rubber Band 100's 40.00 1,480.00 12 Box Rubber Band, Rb-100, Flat, 350g 70.00 840.00 7 Pieces Rubber Stamp 120.00 840.00 46 Pieces Ruler, 12 Inches, Plastic, Clear, High Quality 50.00 2,300.00 4 Pieces Scissor, Heavy Duty For Cloth 230.00 920.00 60 Pieces Scissors, For Office Use 100.00 6,000.00 5 Pieces Semi-open Front Container (white) Size 4 (l350mmx205mmxh132mm) 1,120.00 5,600.00 2 Pieces Semi-open Front Container (white) Size 6(l375mmx420mmxh182mm) 2,575.00 5,150.00 292 Pieces Sign Pen, Black .5 Pen Cap 40.00 11,680.00 198 Pieces Sign Pen, Blue .5 Pen Cap 40.00 7,920.00 4 Pieces Sliding Folder, Long, White, Plastic 38.00 152.00 285 Pack Special Paper For Certificate, Beige, A4, 10's 55.00 15,675.00 4 Pack Special Paper For Certificate, Sage Green, Long, 10's 65.00 260.00 48 Pack Special Paper For Certificates, Green, A4, 10s 55.00 2,640.00 24 Pack Special Paper For Certificates, Light Blue, A4, 10's 55.00 1,320.00 2 Pack Special Paper For Certificates, White, Long, 10's 65.00 130.00 9 Pack Special Paper, White, 250gsm, 20's 100.00 900.00 19 Pieces Stamping Pad, Big - Purple 135.00 2,565.00 25 Box Staple Wire #10 25.00 625.00 252 Box Staple Wire #35-5m (6mm 1/4") 60.00 15,120.00 104 Pieces Stapler #50, Heavy Duty W/ Remover 350.00 36,400.00 16 Pack Sticker Paper , Waterproof, Pearl Glossy Aluminum Semi Clear, A4, 20's 500.00 8,000.00 40 Pack Sticker Paper, Assorted Color, Short, 10's 50.00 2,000.00 98 Pack Sticker Paper, White 10's 50.00 4,900.00 12 Pack Sticky Notes, 3x3 7 Pads/pack 210.00 2,520.00 8 Pack Sticky Notes, 4x4, 7 Pads/pack 180.00 1,440.00 8 Pack Sticky Notes, Sign Here, 125 Sheets/pack 60.00 480.00 33 Pieces Storage And Organizing Box, 200l Cap 1,000.00 33,000.00 12 Pieces Storage Box, Plain, Brown 9 X 1 X 15 170.00 2,040.00 4 Pieces Storage Box, Plastic, 495mm X 320mm 1,200.00 4,800.00 11 Pieces Tape Dispenser, Big, Heavy Duty 200.00 2,200.00 24 Pack Vellum Board Paper, 10's 85.00 2,040.00 10 Pieces Wall Clock Analog (do) 250.00 2,500.00 1 Pieces Wall Clock, Digital 350.00 350.00 6 Pieces White Board 12x24 Inches 800.00 4,800.00 5 Pieces White Board 24 X 48 Inches 1,200.00 6,000.00 2 Pieces White Board 35 X 50 Inches 2,000.00 4,000.00 4 Pieces White Board 48x36ft 2,350.00 9,400.00 120 Pieces White Board Marker, Black, Refillable 60.00 7,200.00 26 Pieces White Board Marker, Blue, Refillable 60.00 1,560.00 4 Pieces White Board Marker, Red 60.00 240.00 1 Pieces White Board, L:60xw:90cm 1,750.00 1,750.00 3 Pieces White Board, Magnetic With Tray, Wall Mounted, H-3 X W 4 Ft 1,300.00 3,900.00

Details: Description Lot 1 - Carprentry (delivery Period: 15 Days) 8 Unit - Portable Hand Drill, Power Sourced: Battery Powered - 2pc; 21 Volt; 1500mah Lithium-ion Batteries; Maximum Rotational Speed: 1500 Rpm; Voltage: 21v; Amperage: 1.5 Amps; Chuck Size: 0.38"; Bit Heads Diameters: From 0.8mm - 10mm; Product Dimensions: 8 - 10" (l) X 2 - 4" (w) X 6 - 8" (h); Material: ‎plastic, Rubber, Metal; Item Weight: Atleast ‎2.5 Pounds; Item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Brand: Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws，1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag 8 Unit - Electric Circular Saw, Voltage: 220-240v; Frequency: 50-60hz; Input Power: 1800w; No-load Speed: Atleast 4800rpm; Blade Diameter: 185mm; Cutting Capacity: 45degree: 44mm, 90 Degree: 65mm; Maximum Cutting Depth: Atleast 90°62mm, Weight: Maximum Of 5.2kg; Item Approximate Dimension: 15-17cm (h), 25-28cm (w), 30-35cm (l) 8 - Unit - Electric Grinder Voltage: 220v Rated Power Input: 750w No - Load Speed: 1100 Rpm Disc Diameter: 0mm Dimension: Approx: Length: 250 - 290mm Width: 50 - 80mm Height: 90 -110mm Weight: 1.5 - 1.8kg 8 Unit - Electric Planer; Voltage: 220v;continuous Rating Input : 500 W ; Planing Width : 82 Mm (3-1/4”);planing Depth : 1 Mm (1/32”) ;max Shiplapping : 9 Mm (11/32); No Load Speed : 16,000 Rpm; Dimension: Approx. : (l) 25 - 30cm*(h) 10 - 15cm*(w) 12 - 17cm; Net Wt- 2 - 4kg; Power Cord Length- At Least 1.5meters; Breadth Of Planer- 82x1mm 8 Unit - Electric Jigsaw Continuous Rating Input: 450 - 600w Capacity: 40mm (in Wood); 6mm ( In Steel) Length Of Stroke: 18mm Strokes Per Minute: 500 - 3,100 Dimension: Approx.: L - 5 - 9 Inches; W - 2 - 4 Inches; H - 4 - 8 Inches Voltage: 220v; Frequency- 50-60hz; No Load Speed- 800-3000rpm; Cutting Capacity- Wood-50mm; Steel- 6mm 8 Unit - Electric Plunge Router Voltage: 220v - 50hz Collect Capacity: 1/2 Inch Continuous Rating Input: 1650w Plunge Capacity: 66mm Overall Height: Approx.: 9 - 12 Inches; Net Weight: At Least 4.2 Kg; 1600w; Base Diameter- 160mm; No Load Speed- 23000rpm Power Supply Cord Length - At Least 4.0m (13.1ft); Rpm 8,000-27,500 8 Set - Wood Chisel Set Of 5; 1/4", 3/8", 1/2", 3/4", 1", , Wooden Handle, High Carbon Metal File L-6.8 Inch Lot 2 - Fish Vending (delivery Period: 30 Days) 1 Unit - Bicycle With Sidecar Bicycle Specifications: Bmx Type Bike Frame Front And Rear Free Wheel Hub For Rim Set Single Engine Speed Tread Type (wheel Set), Tire Size (20 Inches X 2.2125 Jumbo), Interior Tube (20 Inches By 2.2125 Jumbo), Handle Bar, Bmx Fork, Head Parts (h Post, Handle Grip) Chain (single Speed, Pedal (bearing Type) Seat Clamp, Saddle With Spring, Foot Brake (clamp With Spring), Crack Pedals (175mm - 180mm), Side Car Specifications; Side Car With Umbrella Tube Holder Dimensions: 25.8 Inches (l) X 16.2 Inches (w), 15.7 Inches (h), Approx.: 20 - 25 Kls Capacity Materials: 1/2 J1 Pipe 540mm, 316 X Flat Square Bar, J1 Pipe De Una 520mm, 1/4 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo Bicycle With Side Car - Red With Dole And Dilp Logo (front) 1 Unit -digital Weighing Scale, Ac/dc Digital Scale; 6 Digits Lcd Display; 220v-240v/60 Hz; 30 - 40kg; Power Plug: Us Type 1 Pc - Chest Cooler, Item Package Dimensions: ‎approx. : 23 - 26" (l) X 14 - 17" (w) X 13 - 16" (h), Package Weight: ‎5.76kg, Inside Dimensions: Approx: 22 - 25" (l) X 12 - 15" (w) X 13 - 15" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l 1 Pc - Beach Umbrella, Round-shaped; Material: Poly Canvass; Diameter: 40""; Pole Stand Length: At Least 45""; Pole Material: Stainless Steel Chrome 1 Pc - Butcher's Knife, Materials: Stainless; Wood Handle; Size: About 8 - 12 Lot 3 - Barbershop (delivery Period: 15 Days) 3 Set - Cordless Clipper: Body Material: Aluminum; Motor: Rotary; Power/source Battery: Lithium-ion Battery (90+ Minutes Of Runtime); Blades: Titanium Blades; 3 Guide Combs Plastic Material (#1/2, #1, And #1½ ); Cutting Lengths: 0.4-25mm; Inclusions: A Blade Guard; 1 Recharging Transformer (charger); 1 Cleaning Brush, With Lubricating Oil Of At At Least 5 Ml And English User Manual; Product Dimension: Approximately 6 - 8" (l) X 2 - 4" (w); Weight: Maximum Of 400g; Input: Can Be Used For 110-240 Voltage 6 Pc - Hair Thinning Shear(professional Use), Size 6", Stainless Steel;thinning Rate- 25%; No. Of Teeth- 30 6 Set - Hair Shear (set): Material: Stainless Steel, Length; 1 Precision Scissor Approximately 6-7"; 1 Thinning Scissor Atleast 6"; Accesories: Scissors Oil Atleast 5ml 6 Pc - Shaving Razor/labaha: Dimensions: Approximately 5-6" (l) X 3/4-1" (w): Material: Carbon Steel, Color: Black 6 Pc - Barber Skin Fade Brush: Handle: Wood; With Soft Bristles 1" (l); Dimensions: Atleast 5.5" (l) X 1" (w) 3 Set - Comb Set (4pcs/set): Material: High Quality Plastic; Inclusions: #1-approx. Size: 4.88" (l) X 1.02" (w); #2-approx. Size: 7.09" (l) X 1.46" (w); #3-approx. Size: 7.87" (l) X 1.18" (w), #4-6.10" (l) X 0.20" (w) 6 Pc - Barber's Cape: Color: Black, 140cm (l) X 110cm (w); Cloth: Polyester 3 Pc - 360 Degree Swivel Barber Chair: Classic Back Seat With Chrom Steel Base; Premium Steel Frame And High Class Foot Pump; Heavy Duty Leather Cover; Lower Height - Atleast 51cm; Top Height - Atleast 61cm; Backrest Height - Atleast 40cm 6 Pc - Barber Apron: With Two Pockets; Waterproof; Material: Cotton And Acrylic; Item Size: Approx. 38-38.19" (l) X 27-27.36" (w) 6 Pc - Barber Spray Bottle, Plastic, Clear, 300 Ml 6 Pc - Barber Spray Bottle, Plastic, Clear, 500 Ml 6 Pc - Tissue, Roll, 2 Ply, 6 Pcs Per Pack 15 Pc - Baby Powder, 500g Lot 4 - Laundry Service (delivery Period: 15 Days) 1 Unit - Washing Machine With Spinner And Dryer; Dimensions: Approx. 57 - 60 Cm (l) X 56 - 59cm (w) X 96 - 99 Cm (h); Gross Weight: Approx. 44 - 47kg; Washing Capacity: Atleast 11.5kg; Rated Power: 1500 W; Voltage: 220 V 2 Pcs - Wash Basin (big Batya), Round Plastic, Dia- 64.5 Cm, H- 25cm Thickness- 1/2 Inch; Color- Black 2 Pcs -laundry Basket, Round Plastic, L- 22 - 27inches, H- 18 - 23inches, 23 - 26 Cm Thicknesss, Color Black 3packs - Powder Detergent, 10 Kg Pack 3 Gallon - Fabric Conditioner; 128 Ounces Lot 5 - Nail Care Service (delivery Period: 15 Days) 4 Gallon -acetone/nail Polish Remover 4 Gallon - Cuticle Remover 2 Pack - Nail Brush, Material: Plastic; Size: Atleast 3" (l), 2-3" (h); 12 Pcs/pack 2 Set - Nail Tool Set, Material: Stainless Steel; Case: Leather; Package Size: Approximately 15-15.5cm (l) X 8cm (w) X 2cm (h); Inclusions: Cuticle Trimmer (95mm), Blackhead Needle And Loop Remover (83mm), Eyebrow Tweezer (86mm) Peeling Knife (90mm), Nail File (75mm), Ear Pick (78mm), Double Pick (75mm), Dead Skin Fork (86mm), Small Pedicure Plier (95mm), Acne Needle (83mm), Small Nail Clipper (62mm) Bevel Nail Clipper (61mm), Large Nail Clipper (82mm), Beauty Tip Scissor (89mm), Pusher 20 Pack - Cotton Balls, 300g (100 Pcs Large Cotton Balls) 2 Set - Nail Polish, Volume: 15ml; With 24 Colors Inclusions: 14k Gold, 18k Gold, 24k Gold, African Plum, Baby Pink, Black Velvet, Carolina Peach, Cashmere, Emerald Shimmer, Golden Bronze, Italian Nude, Platinum Special, Pussy Red, Red Pearl, Saphire Glow, Silver Platinum, Simply Red, Tahiti Brown, White Satin, White Rose, Platinum Silver, Touch Of Tan, Touch Of Beige, Colorless 2 Unit -foot Spa Soaker, With Pumice Stone; Package Dimensions: Approximately 15 - 17" X 12 - 14" X 6 - 8", Weight: About 4 - 6 Pounds; Rated Power: 500 Watts; Rated Voltage: 110~120v; Rated Frequency: 50hz; Temperature Adjustable Range: 35℃ To 48℃ 4 Gallon - Astringent Foot Soaker 4 Pack - Cooling Foot Soak, Product Dimensions: ‎approximately 6.5-7" X 2.38-2.50" X 9.259.50", Weight: Atleast 900g 4 Tube - Exfoliating Foot Scrub, Dimension: Approx. 7 - 8" X 2 - 3" X 1 - 2 Inches; Weight: Atleast 6oz 4 Pc - Foot File And Callous Remover, Material: Metal, Steel; Item Dimensions: Approx. (l) 10-10.78" X (w) 2.7"; Item Weight: At Least 3.2 Pounds 4 Gallon - Alcohol, Isopropyl, 30% 4 Gallon - Foot Scrub , Peppermint Flavor,128 Ounces 10 Pc - Salon Towels: Material: Pure Cotton; Sizes: Approx. 70 - 75cm (l) X 30 - 35cm (w); Color: White 2 Pc - Stool, Hard Plastic Material; Dimension: Approximately 10-11"(l) X 9-10" (w) X Atleast 20" (h) - Including The Backrest 2 Pc - Manicurist Bag, Made Of Heavy Duty Nylon; Large Capacity: Enough Room To Hold Up To 42 Bottles Of 15ml Nail Polish; Size: Approx. 8-9" (l) X 6-7" (w) X 4-5" (h) Lot 6 - Vulcanizing (delivery Period: 15 Days) 2 Unit - Tire Vulcanizing Machine: Automatic Temperature Adjustment; Steel Material; Maximum Current: 10a; Temperature Range: 140 - 165 Degrees Celcius; Voltage: 220v; Power: 500w; Vulcanizing Time: 7 Minutes; Dimension: Approx.: Screw Diameter: 23 - 28mm (l) X 292 - 297mm (w), 407 - 412mm (h) 2 Unit - Air Compressor Machine, Motor Power: 1.5hp; Speed: 1050rpm; Air Delivery: 250l/min; Working Pressure: 115 Psi/8 Bar; Tank: 100l; Size: Approx. (l) 937 - 942mm X (w) 382 - 387mm X (h) 797 - 802mm; Net Weight: At Least 89 - 91kg 2 Unit - Hydraulic Bottle Jack, Material: Alloy Steel; 2 Tons Capacity; Minimum Height: 148mm; Maximum Height: 251-300mm; Lifting Height: 80mm; Adjusting Height: 50mm; Net Weight: Approx. : 2 - 3kg 2 Roll - Air Compressor Hose, 20m Long, Hose Diameter 1/4" : Working Pressure Up To 150psi, Material: Polyurethane 2 Pairs - Tire Changer Wrench, Atleast 12" Long; Material: Metal Steel 2 Pc - Scissors, Material: Forged Steel; 10" Long, With Rubber Grip Handle Lot 7 - Carwash Service (delivery Period: 15 Days) 1 Unit - Pressure Washer, Power: 1200w; Max. Pressure: 100 Bar; Max. Flow Rate: 300l/h; Inlet Water Temperature: 40°c; Motor Type: Series; Pump Type: 3 Cylindrical, Metal; Cable Length : Atleast 5m; Hose Length: Atleast 3m; Weight (w/out Accessories): Approximately 3 - 5kg; Nozzles: 20/80 Degree Variable Fan 1 Set - Vacuum With Blower, 22l Tank Capacity, Power Supply: 220v-240v; Power: 1200watts; Rated Frequency: 50/60h; Kilo Pascal: 18kpa; Max Air Flow I/sec Motor: 50l/s; Sound Level (db(a): 75; Hose Length: Atleast 2.1m; Cord Length: Atleast 3m; Inclusions: Atleast 3.2cm Flexible Hose, Extension Wand, Floor Nozzle, Crevice Nozzle, Cartridge Filter 1 Set - Power Sprayer Belt Driven Aluminum, 1.5 Hp; Induction Type: Electric Motor; Max Operating Pressure Of 450psi For Single User; While 750psi For Two Users; Water Volume Of 20 Liters/minute; Motor Dimension: Approximately 350mm (l) X 280mm (w) X 300 Mm (h); Power Engine 3.5-4 Ps; Inclusion: 10 Meter Discharge Pressurized Hose, 60hz; Plunger Size: 22mm; Spraying Volume; Atleast 25l/min; Single Cylinder; 4 Stroke; Air Cooled; Ohv 1 Pc - Plastic Container Drum, Size: Approx.: 90 - 92cm (h), 56 - 58cm (diameter); Weight: Atleast 8 - 9 Kg; Capacity: 200l 1 Set - Spray Gun With Hose, Water Gun Type: Fog And Direct; Gun Body Material: Alluminum Alloy; Tip Material, Copper; Handle Material, Alloy; Hose Length: 5m; Product Size: 14cm (l) X 18cm (w) 2 Pcs - Pail, Dimensions: Approx. (l) 30 - 32cm; (w) 20 - 22cm; (h) 27 - 29cm ; Material: Plastic 3 Pc - Chamois Cloth, Material: Soft, High Absorbent Leather; Size: About 30cm (l) X 30cm (w) 2 Pc - Sponge (big), Material: Polyurethane; Dimensions: Atleast 8.8" (l) X 4.4" (w) X 2.64" (h); Item Weight: Approx. 0.3 Pounds 2 Liter - Car Shampoo, 1l, Liquid Gel; Color: Orange/red 2 Liter - Tire Black Dressing, 1l, Wax Type; Color: Black 5 Pcs - Car Polisher, 250 Ml, Liquid Lot 8 - Auto / Motor Repair Service (delivery Period: 15 Days) 1 Unit - Air Compressor Machine, Motor: 1/2 Hp; No. Of Cylinder: 2; Phase: 1; Pressure: 85 Psi; Capacity: 46 Liters; Approximate Dimension: 95-100cm (l) X 31-35cm (w) X 64-70cm (h); Weight: 46 - 48kg; Inflation Time: 53min; Air Displacement: 208l/min 1 Set - Pliers Tools Set, Material: Chrome Vanadium Steel, Alloy Steel; Handle Material: Thermoplastic Rubber; Item Weight: Atleast 790 Grams; Inclusions: Atleast 8" (length) Combination Pliers, 6" (length) Diagonal Cutting, 6" (length) Long Nose Pliers 1 Unit - Impact Wrench, Lithium Ion Battery Voltage: 18v; Weight W/out Battery: Approximately 1 - 2kg; Torque: Max-160 Nm; No-load Speed: 0-2,800 Rpm; Impact Rate: 0-3,600 Bpm; Tool Holder: 1/4'' Hex Uni, Screw, Diameter: M6 – M14; Vibration Emission Value Ah: 9.5 M/s²; Uncertainty K: 1.5 M/s²; Vibration Emission Value Ah: 9.5/m/s² 1 Set - Ratchet And Socket Set, Material: Steel; Inclusions: 20 Pieces 1/2" Point Sockets1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 19/32, 5/8, 11/16, 3/4, 25/32, 13/16, 7/8, 15/16, 31/32, 1, 1-1/16, 1-1/18, 1-3/16, 1-1/4; 6 Pieces 1/2" Accessories Extension Bar - 5", Extension Bar - 10", Spark Plug Socket 6 Pt. 13/16", Sliding T-bar 10" With Molded Plastic Case 1 Set - Screwdriver, Cushion Grip; Magnetized Tip For Easy Pick-up Of Screws , 6 Pcs (slotted 6mm X 150mm), Slotted Parallel 5mm X 100mm, Slotted 3mm X 100mm, Slotted 5mm X 150mm, Ph2 X 150mm, Ph1 X 100mm) 1 Set - Wrench Set, Weight: 3 - 4kg; Material: Min. Or Max Chrome Vanadium Steel; Inclusion: 8mm,9mm,10mm,12mm,13mm,14mm,17mm, 19mm,21mm,22mm, 24mm, 27mm, 30mm, 32mm *nothing Follows*

Details: Description Request For Quotation Mode Of Procurement: Shopping 52.1(b) Date: _____________ Pr No.: _____________ Rfq No.: _____________ Company/business Name: Complete Office Address: Business/mayor’s Permit No: Tin: The Research Institute For Tropical Medicine – Department Of Health, Through Its Bids And Awards Committee (bac), Intends To Procure The Below Mentioned Items Through The Above-mentioned Mode Of Procurement Based On The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. Please Quote Your Best Offer For The Item/s Described Herein, Subject To The Terms And Conditions Provided On This Request For Quotation (rfq). Submit Your Quotation Duly Signed By You, Or Your Duly Authorized Representative Within Five (5) Days Which Shall Be Addressed To The Ritm Bids And Awards Committee. A)the Following Documents Are Required To Be Submitted Along With Your Formal Quotation: Documentary Requirement Remarks Valid And Current Mayor’s/business Permit In Case Not Yet Available, You May Submit Your Expired Mayor’s Or Business Permit With The Official Receipt Of Renewal Application. However, A Copy Of The Latest Mayor’s Or Business Permit Shall Be Required To Be Submitted After Award Of Contract But Before Payment. Valid And Current Certificate Of Platinum Membership With Valid Annex “a” May Be Submitted In Lieu Of The Mayor’s/business Permit Philgeps Registration/membership Bir Form 2303 Company Name Registered In Sec/dti/cda Must Be The Same Registered Name In Bir Form 2303. Note: Incomplete Submission Of The Required Documents Will Be A Ground For Disqualification. For Any Clarification, You May Contact Us At The Contact Information Provided: Mae Marie E. Hernandez Bac Secretariat Head (632) 8807-2628 To 32 Loc. 210 And/or 240 E-mail Address: Procurement@ritm.gov.ph / Procurement_02@ritm.gov.ph Website: Www.ritm.gov.ph Instructions: Note: Failure To Follow These Instructions Will Disqualify Your Entire Quotation. (1)do Not Alter The Contents Of This Form In Any Way. (2)the Use Of This Rfq Is Highly Encouraged To Minimize Errors Or Omissions Of The Required Mandatory Provisions. If Another Form Is Used Other Than The Latest Rfq, The Quotation Shall Contain All The Mandatory Requirements/provisions Including Manifestation On The Agreement With The Terms And Conditions Below. (3)all Technical Specifications Must Be Complied With. Failure To Comply With The Mandatory Requirements Shall Render The Quotation Ineligible/disqualified. (4)quotations May Be Submitted Through Electronic Mail At: Procurement@ritm.gov.ph / Procurement_02@ritm.gov.ph. (5)quotations, Including Documentary Requirements, Received After The Deadline Shall Not Be Accepted. For Quotations Submitted Via Electronic Mail, The Date And Time Of Receipt Indicated In The Email Shall Be Considered. Terms And Conditions: bidders Shall Provide Correct And Accurate Information Required In This Form. any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By You Or Any Of Your Duly Authorized Representative/s. price Quotation/s, To Be Denominated In Philippine Peso, Shall Include All Taxes, Duties, And/or Levies Payable – If Applicable. quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. in Case Of Two Or More Bidders Are Determined To Have Submitted The Lowest Calculated Quotation/lowest Calculated And Responsive Quotation, The Ritm-bac Shall Adopt And Employ “draw Lots” As The Tie-breaking Method To Finally Determine The Single Winning Provider In Accordance With Gppb Circular 06-2005. award Of Contract Shall Be Made To The Lowest Quotation Which Complies With The Technical Specifications, Requirements And Other Terms And Conditions Stated Herein. payment Shall Be Made After Delivery And Upon The Submission Of The Required Supporting Documents, I.e., Order Slip And/or Billing Statement, By The Supplier, Contractor, Or Consultant. Our Government Servicing Bank, I.e., The Land Bank Of The Philippines, Shall Credit The Amount Due To The Identified Bank Account Of The Supplier, Contractor, Or Consultant Not Earlier Than Twenty-four (24) Hours, But Not Later Than Forty-eight (48) Hours, Upon Receipt Of Our Advice. Please Note That The Corresponding Bank Transfer Fee, If Any, Shall Be Chargeable To The Account Of The Supplier, Contractor, Or Consultant. liquidated Damages Equivalent To One-tenth Of One Percent (0.1%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. Ritm May Terminate The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Available To The Procuring Entity. Technical Offer/proposal: After Having Carefully Read And Accepted The Instructions And Terms And Conditions, I/we Submit Our Technical Proposals/quotations For The Item/s As Follows: Item # Qty/ Unit Item Description Supplier’s Compliance (indicate Brand And/or Model, Including Complete Specifications To Be Offered - Applicable) 1 1,522/piece Ballpen, Ballpoint Pen, 1.5mm Tip, Retractable, Black General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2 30/piece Binder, 2-ring, 1.5ins, Black, Transparent, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 3 134/piece Binder, 3-ring, A4 Size, 1.5" General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 4 18/piece Binder, 3-ring, Legal Size, 1" Thick General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 5 22/piece Binder, 3-ring, Legal Size, 2" Thick General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 6 38/piece Binder, D-ring, 3 Hole, A4 Size, Hardbound, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 7 48/piece Board, Clipboard, With Metal Clip, Vinyl, A4 Size General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 8 1/pack Card, Pvc, White, Iso R-80 (54mm X 86 Mm) 100 Sheets /pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 9 385/pack Clear Book Refill, A4, 10 Sheets Per Pack, International Punching 11 Holes, Fits All, Resists Tearing, Heavy Duty Reinforced Binding Edge General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 10 10/box Clear Book Refill, For 3-hole Ring Binder, A4 Size, 100 Pieces/box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 11 48/pack Clear Book Refill, Long, 10 Sheets Per Pack, International Punching 25 Holes, Fits All, Resists Tearing, Heavy Duty Reinforced Binding Edge General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 12 470/pack Clear Sheet, For 3 Hole Ring Binder, A4 Size,10 Sheets Per Pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 13 104/box Clip, Backfold, All Metal, Clamping: 12mm (-1mm) General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 14 2/piece Cork Board, With Aluminum Frame (24" X 36") Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 15 30/piece Data File Box, Made Of Chipboard, Black, 5'' X 9'' General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 16 232/roll Double Sided Tape, Adhesive, 1/4" Wide General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 17 5/roll Film, Film For Id - Hdp5000 Film, 1500 Counts General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 18 120/piece Folder, Archfile, 2 Holes, A4, 3'' Thickness, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 19 20/piece Folder, Clear, Transparent Folder With Slide, A4 Size (210mm X 297mm), Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 20 20/piece Folder, Legal Size (216mm X 330mm),transparent Folder With Slide, Clear, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 21 27/pack Folder, Tagboard, For A4 Size Documents, 100/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 22 1/piece Glue Gun, Heavy Duty With High And Low Dual Temperature Settings, 220 Volts, 60 Hertz, 40 Watts, Per Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 23 7/piece Glue Gun, Hot Melt, 20-60watts, Cordless, Rechargeable, For Glue Stick Big General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 24 120/piece Glue Stick, For Hot Melt Glue Gun General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 25 30/box Hanging Folders, Poly-reinforced Top Edge And Bottom Fold Provide Added Durability Standard Green Legal-sized Hanging Folders Lighter Interior Helps Prevent Time-wasting Misfiles Includes A Printable Label Sheet And 25 Clear 1/5-cut Tabs Product Dimensions - 16 X 9.65 X 2.5 Inches (40.6 X 24.5 X 6.4 Cm) Paper Type Material, 25pcs/box, Box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 26 40/piece Id Case, Holder, With Lace, Plastic, Vertical, (id Case: 6cm X 10cm / Lace: 1/2" X 20") General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 27 300/set Id Case, Retractable With Horizontal Id Badge Holder (66mm X 98mm) General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 28 20/piece Id Clip, Suitable For Id Jacket Size 11.5 Cm X 9 Cm General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 29 60/piece Id Jacket, Clear Type, Size: 11.5 Cm X 9 Cm General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 30 5/piece Illustration Board, 760mm X 1000mm General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 31 12/box Laminating Film, 222mm X 286mm, 250 Micron, 100 Sheets/box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 32 11/box Laminating Film, A3 Size, 250 Micron,100 Pieces/box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 33 59/pack Laminating Film, A4 Size, 125 Micron, 25 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 34 54/pack Laminating Film, A4 Size, 250 Micron, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 35 186/piece Magazine File Box, Large Size, Made Of Chipboard General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 36 79/piece Marker Pen Type, Fade And Water-resistant, Quick-drying, Ap Certified Non-toxic Formula, Ultra-fine Point, 0.05mm, Black, Per Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 37 5/pack Marker, Glassboard Marker, 4 Pcs Per Pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 38 110/pad Note Pad, Stick On, Lined, Yellow, 152.4mm X 101.6mm (6" X 4") General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 39 1/case Notebook, Spiral, Color: White, Cleanroom Spiral Notebook, 5.5'' X 8.5'', (140mm X 216mm), 50 Pcs/case General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 40 20/pack Onion Skin , Size: A4, 50 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 41 2/piece Organizer, Desk , Stainless Steel , (size: H:5" X W:5.5" X L:8.7", Black General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 42 2/piece Paper Cutter, Wooden, Brown, B5 Size (17.6cm X 25.0cm), Easy Adjustment For Cutting Desires With Secured Sliding Paper Size Marker General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 43 50/pack Paper Sticker, High-gloss, 8.5 X 11'', Pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 44 110/pack Paper Sticker, Matte, A4 Size, Green, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 45 10/pack Paper Sticker, Matte, Blue, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 46 10/pack Paper Sticker, Matte, Indigo, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 47 10/pack Paper Sticker, Matte, Orange, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 48 10/pack Paper Sticker, Matte, Pink, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 49 10/pack Paper Sticker, Matte, Red, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 50 35/pack Paper Sticker, Matte, Yellow, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 51 13/pack Photo Paper, Matte, Size: A4, 146gsm, 100 Sheets/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 52 20/pack Photo Paper, Photo, A3 Size, High Gloss, 230 Gsm, 20 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 53 50/ream Photocopy Paper, Letter Size 8.5x11'', 80gsm Substance 24, Ream General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 54 1/roll Plastic Cover, Transparent, Gauge 15 Hard (thickness), 48 X 50 Yards Per Roll General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 55 10/roll Property Tag, Polyester Labels, Color Solid Green, Pre-printed, 3.5" X 3.5", Non-erasable, Non-tearable, Waterproof, Can Stand For Hot And Cold Temp, Luding Resin Ribbon, 102mm X 75m For Gc420t Printer, Roll General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 56 6/roll Property Tag, Polyester Labels, Color White, Pre-printed, 2" X 1", Non-erasable, Non-tearable, Strong Adhesive Can Stand For Hot And Cold Temp, Including Resin Ribbon 56mm X 75m, 2500 Pieces/roll *item Must Be Compatible With Gc420t Printer. General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 57 138/piece Record Book, 150 Pages, Size: 214mm X 278mm Min General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 58 4/bundle Ring Binder, 84 Rings, Plastic, 64mm X 1.2m, 10 Pieces/bundle General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 59 332/piece Sign Pen, Liquid/gel Ink, 1.0 Mm Needle Tip, Blue General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 60 60/piece Sign Pen, Liquid/gel Ink, 1.0 Mm Needle Tip, Red General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. Financial Offer/proposal: Please Quote Your Best Offer For The Item/s Below. Please Do Not Leave Any Blank Items. Indicate “0” If Item Being Offered Is For Free: Item # Qty/ Unit Item Description Abc Price Proposal Unit Cost Price Proposal Total Cost 1 1,522/piece Ballpen, Ballpoint Pen, 1.5mm Tip, Retractable, Black General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 25,874.00 2 30/piece Binder, 2-ring, 1.5ins, Black, Transparent, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 4,539.30 3 134/piece Binder, 3-ring, A4 Size, 1.5" General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 16,750.00 4 18/piece Binder, 3-ring, Legal Size, 1" Thick General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,944.00 5 22/piece Binder, 3-ring, Legal Size, 2" Thick General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 3,190.00 6 38/piece Binder, D-ring, 3 Hole, A4 Size, Hardbound, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 8,251.32 7 48/piece Board, Clipboard, With Metal Clip, Vinyl, A4 Size General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2,400.00 8 1/pack Card, Pvc, White, Iso R-80 (54mm X 86 Mm) 100 Sheets /pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,210.00 9 385/pack Clear Book Refill, A4, 10 Sheets Per Pack, International Punching 11 Holes, Fits All, Resists Tearing, Heavy Duty Reinforced Binding Edge General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 7,700.00 10 10/box Clear Book Refill, For 3-hole Ring Binder, A4 Size, 100 Pieces/box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2,829.80 11 48/pack Clear Book Refill, Long, 10 Sheets Per Pack, International Punching 25 Holes, Fits All, Resists Tearing, Heavy Duty Reinforced Binding Edge General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 936.00 12 470/pack Clear Sheet, For 3 Hole Ring Binder, A4 Size,10 Sheets Per Pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 16,450.00 13 104/box Clip, Backfold, All Metal, Clamping: 12mm (-1mm) General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,687.92 14 2/piece Cork Board, With Aluminum Frame (24" X 36") Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,440.00 15 30/piece Data File Box, Made Of Chipboard, Black, 5'' X 9'' General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2,802.30 16 232/roll Double Sided Tape, Adhesive, 1/4" Wide General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 15,080.00 17 5/roll Film, Film For Id - Hdp5000 Film, 1500 Counts General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 94,170.00 18 120/piece Folder, Archfile, 2 Holes, A4, 3'' Thickness, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 10,200.00 19 20/piece Folder, Clear, Transparent Folder With Slide, A4 Size (210mm X 297mm), Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 180.00 20 20/piece Folder, Legal Size (216mm X 330mm),transparent Folder With Slide, Clear, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 200.00 21 27/pack Folder, Tagboard, For A4 Size Documents, 100/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 8,286.30 22 1/piece Glue Gun, Heavy Duty With High And Low Dual Temperature Settings, 220 Volts, 60 Hertz, 40 Watts, Per Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 924.00 23 7/piece Glue Gun, Hot Melt, 20-60watts, Cordless, Rechargeable, For Glue Stick Big General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 4,200.00 24 120/piece Glue Stick, For Hot Melt Glue Gun General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 840.00 25 30/box Hanging Folders, Poly-reinforced Top Edge And Bottom Fold Provide Added Durability Standard Green Legal-sized Hanging Folders Lighter Interior Helps Prevent Time-wasting Misfiles Includes A Printable Label Sheet And 25 Clear 1/5-cut Tabs Product Dimensions - 16 X 9.65 X 2.5 Inches (40.6 X 24.5 X 6.4 Cm) Paper Type Material, 25pcs/box, Box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 28,500.00 26 40/piece Id Case, Holder, With Lace, Plastic, Vertical, (id Case: 6cm X 10cm / Lace: 1/2" X 20") General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,760.00 27 300/set Id Case, Retractable With Horizontal Id Badge Holder (66mm X 98mm) General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 13,098.00 28 20/piece Id Clip, Suitable For Id Jacket Size 11.5 Cm X 9 Cm General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 194.00 29 60/piece Id Jacket, Clear Type, Size: 11.5 Cm X 9 Cm General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,855.80 30 5/piece Illustration Board, 760mm X 1000mm General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 346.50 31 12/box Laminating Film, 222mm X 286mm, 250 Micron, 100 Sheets/box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 11,820.00 32 11/box Laminating Film, A3 Size, 250 Micron,100 Pieces/box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 19,580.00 33 59/pack Laminating Film, A4 Size, 125 Micron, 25 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 8,850.00 34 54/pack Laminating Film, A4 Size, 250 Micron, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 7,020.00 35 186/piece Magazine File Box, Large Size, Made Of Chipboard General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 8,511.36 36 79/piece Marker Pen Type, Fade And Water-resistant, Quick-drying, Ap Certified Non-toxic Formula, Ultra-fine Point, 0.05mm, Black, Per Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 9,124.50 37 5/pack Marker, Glassboard Marker, 4 Pcs Per Pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 3,000.00 38 110/pad Note Pad, Stick On, Lined, Yellow, 152.4mm X 101.6mm (6" X 4") General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 19,324.80 39 1/case Notebook, Spiral, Color: White, Cleanroom Spiral Notebook, 5.5'' X 8.5'', (140mm X 216mm), 50 Pcs/case General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 34,715.00 40 20/pack Onion Skin , Size: A4, 50 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 3,465.00 41 2/piece Organizer, Desk , Stainless Steel , (size: H:5" X W:5.5" X L:8.7", Black General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 3,300.00 42 2/piece Paper Cutter, Wooden, Brown, B5 Size (17.6cm X 25.0cm), Easy Adjustment For Cutting Desires With Secured Sliding Paper Size Marker General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,424.00 43 50/pack Paper Sticker, High-gloss, 8.5 X 11'', Pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2,599.00 44 110/pack Paper Sticker, Matte, A4 Size, Green, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 6,050.00 45 10/pack Paper Sticker, Matte, Blue, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 550.00 46 10/pack Paper Sticker, Matte, Indigo, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 550.00 47 10/pack Paper Sticker, Matte, Orange, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 550.00 48 10/pack Paper Sticker, Matte, Pink, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 550.00 49 10/pack Paper Sticker, Matte, Red, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 550.00 50 35/pack Paper Sticker, Matte, Yellow, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,925.00 51 13/pack Photo Paper, Matte, Size: A4, 146gsm, 100 Sheets/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 7,150.00 52 20/pack Photo Paper, Photo, A3 Size, High Gloss, 230 Gsm, 20 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 7,420.00 53 50/ream Photocopy Paper, Letter Size 8.5x11'', 80gsm Substance 24, Ream General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 8,500.00 54 1/roll Plastic Cover, Transparent, Gauge 15 Hard (thickness), 48 X 50 Yards Per Roll General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2,750.00 55 10/roll Property Tag, Polyester Labels, Color Solid Green, Pre-printed, 3.5" X 3.5", Non-erasable, Non-tearable, Waterproof, Can Stand For Hot And Cold Temp, Luding Resin Ribbon, 102mm X 75m For Gc420t Printer, Roll General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 90,090.00 56 6/roll Property Tag, Polyester Labels, Color White, Pre-printed, 2" X 1", Non-erasable, Non-tearable, Strong Adhesive Can Stand For Hot And Cold Temp, Including Resin Ribbon 56mm X 75m, 2500 Pieces/roll *item Must Be Compatible With Gc420t Printer. General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 17,532.90 57 138/piece Record Book, 150 Pages, Size: 214mm X 278mm Min General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 6,486.00 58 4/bundle Ring Binder, 84 Rings, Plastic, 64mm X 1.2m, 10 Pieces/bundle General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 751.92 59 332/piece Sign Pen, Liquid/gel Ink, 1.0 Mm Needle Tip, Blue General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 13,270.04 60 60/piece Sign Pen, Liquid/gel Ink, 1.0 Mm Needle Tip, Red General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2,398.20 Delivery Period: 30 Working Days Total Offered Quotation In Words: ______________ In Figures: ______________ Price Validity: ________________ Payment Terms: Thirty (30) Calendar Days Payment Details: Banking Institution: _________________________________________________ Account Number: __________________________________________________ Account Name: _________________________________________________ Branch: _________________________________________________ Note: Only The Actual Amount Of The Accepted Items Shall Be Paid. ___________________________ Signature Over Printed Name Of Authorized Representative ___________________________ Position/designation ___________________________ Office Telephone/fax/mobile Nos. ___________________________ Email Address/es

Details: Description Item No. Qty Unit Item "technical Specifications (brand And Model)" Abc Comply Counter Offer 1 (one) Lot Supply And Delivery Of Office Supplies & Paper Materials 819,648.51 1 35 Pc Arch File Folder, Size: Legal, Vertical, Side Clip, Color: Black 8,750.00 2 20 Pc Arch File Folder 3", Size: A4 (2 Ring Binder, Side Clip), Color: Black 2,400.00 3 20 Pc Arch File Folder 3", Size: Legal (2 Ring Binder, Side Clip), Color: Black 2,400.00 4 24 Box Ballpen, 0.3mm Ballpoint, Fine (black), 12pcs/box 4,320.00 5 373 Box Ballpen, 0.5mm Ballpoint, Fine (black), 12pcs/box 55,950.00 6 167 Box Ballpen, 0.5mm Ballpoint, Fine (blue), 12pcs/box 25,050.00 7 88 Box Ballpen, 0.5mm Ballpoint, Fine (red), 12pcs/box 13,200.00 8 10 Box Ballpen, 0.7mm Ballpoint, Fine (black), 12pcs/box 1,980.00 9 2 Pair Battery, Rechargeable, Aa 410.00 10 2 Pair Battery, Rechargeable, Aaa 390.00 11 1 Pc Battery Charger, 4 Slot, Compatible With Aa & Aaa 800.00 12 51 Pack Battery, Dry Cell, Aa, 1.5 Volts, Alkaline, 2pcs/pack 2,805.00 13 50 Pack Battery, Dry Cell, Aaa, 1.5 Volts, Alkaline, 2pcs/pack 3,000.00 14 130 Pc Certificate Holder Size Short, Color Green, With 2 Hangers For Portrait And Landscape Orientations 6,500.00 15 1084 Pc Certificate Holder Size A4, Color Green, With 2 Hangers For Portrait And Landscape Orientations 54,200.00 16 113 Pc Certificate Holder Size Long, Color Green, With 2 Hangers For Portrait And Landscape Orientations 6,780.00 17 8 Box Clip, Backfold, 15mm, 12pcs/box 96.00 18 15 Box Clip, Backfold, 41mm, 12pcs/box 525.00 19 22 Pc Correction Tape, Disposable, Length: 8m Min. 605.00 20 2 Pc Cork Board 18 X 24 Inches 1,200.00 21 1 Pc Cork Board With Frame, 36 X 48" 2,750.00 22 1 Pc Cork Board 1200 X 900mm 500.00 23 4 Pc Cutter/utility Knife, For General Purpose, With Anti-slip Grip Plastic Molded Body, Built-in Blade Snapper, Steel Blade Track & Safety Screw Locking; Blade Measurement: 100mm, Width:16mm, Thickness:0.40mm At Least 176.00 24 65 Pc Correction Tape, Disposable, Length: 8m Min. 1,787.50 25 25 Pc Data Folder, Made Of Chipboard, Taglia Lock, Portrait 6,250.00 26 3 Pc Desk Organizer, 3 Layer, Metal 3,285.00 27 16 Unit Desk Organizer, 7 In 1, School Supplies Storage Holder, Color Black, Metal Mesh 5,600.00 28 36 Pc Document Tray File Organizer 4-tier, Color Black ; Material: Metal ; Overall Size: 30cm X 35cm X 30cm 14,400.00 29 85 Roll Double Sided Tape, With Foam, 1" , Min. 5meters/roll 7,650.00 30 240 Roll Double Sided Tape, Without Foam, 1" , Min. 10meters/roll 7,200.00 31 57 Roll Duct Tape, 2" , 11 Yards/roll, Color: Black 4,702.50 32 10 Roll Duct Tape, 2" , 11 Yards/roll, Color: Green 1,000.00 33 4 Roll Duct Tape 2", 11yards/roll, Color Yellow 360.00 34 2 Roll Duct Tape, Waterproof, 3" , Color Gray, 25meters/roll Min 700.00 35 10 Roll Duct Tape, 48mm X 11 Yards, Color Black 1,100.00 36 10 Roll Duct Tape, 48mm X 11 Yards, Color Pink/white/maroon 1,100.00 37 28 Box Fastener, Plastic, 70mm, Between Prongs 50pcs/box 1,386.00 38 6 Box Fastener, Plastic, Extra Long, 8.5 Inches, 50sets/box 1,500.00 39 20 Pc File Case, Size Legal, Clear/tranparent (portable Project Case File) 4,000.00 40 6 Box Folder, Pressboard With Insertable Metal Tab, Size: 240mm X 370mm (-5mm), 100pcs/box 9,000.00 41 1 Pc Gun Tucker, Quick Jam Release, Adjustable Driving Force, Made Of All Steel Construction 350.00 42 2 Pc Highlighter, Color: Yellow 50.00 43 2 Pc Highlighter, Color: Pink 50.00 44 2 Pc Highlighter, Color: Orange 50.00 45 1 Pc Highlighter, Color Blue 44.00 46 20 Pc Ink Refill, Whiteboard Marker, Color Black, 30ml 3,080.00 47 1 Bottle Ink, For Stamp Pad, Color: Purple 28.79 48 5 Pack Laminating Film, Size A4, 125 Microns Thickness, 100sheets/pack 2,800.00 49 2 Roll Laminating Film, Size: 9", 127 Microns (5mil) 50meters/roll 5,000.00 50 1 Pack Laminating Film, Size Long, 125 Micron Thickness, 100sheets/pack 650.00 51 1 Pack Laminating Film, Size: Long, 250 Microns Thickness, 100pcs/pack 1,650.00 52 20 Pc Lever Arch File, Made Of Chipboard, Taglia Lock, Size Legal, Vertical, Color: Blue 4,900.00 53 5 Pc Lever Arch File Binder Top Mechanism (2-d Ring=7cm) ,(height-14" X Length-11" X Width-3") 1,475.00 54 1 Unit Laminating Machine, Thermal, 250 Microns Maximum Laminating Film Thickness, Up To A3 Size, 4 Heat Resisting Silicone Rollers, Steel Case, Hot And Cold Laminating, Atleast 13" Laminating Length 4,180.00 55 1 Set Looseleaf Cover / Looseleaf Folder, Size Long 2,900.00 56 25 Pc Magazine File Box, Size Large, Color Green 3,875.00 57 1 Pack Marker, Permanent, Black, Broad, 12pcs/pack 700.00 58 1 Box Marker, Permanent Twin Marker, 1.0mm & 0.4mm Tip, Color Black, 12pcs/box 341.00 59 3 Pc Marker, Permanent, Chisel Tip, Black 270.00 60 3 Pc Marker, Permanent, Chisel Tip, Blue 270.00 61 3 Pc Marker, Permanent, Chisel Tip, Red 270.00 62 6 Pc Mouse Pad With Gel Wrist Support 1,200.00 63 16 Pc Mouse Pad, Desk Type With Foam Wrist Rest 4,800.00 64 11 Unit Multi-layer Storage For Papers And Documents ; 5 Drawers ; With Hole Each Drawer For Wasy Grip And Crrying; Size: 14 1/4" X 10 7/8 X 10 7/8" (l X H X W) 9,680.00 65 1 Unit Paper Cutter (sliding; Heavy Duty; Size: A3 ; Metal Base) 3,000.00 66 1 Unit Pencil Sharpener, Double Thickness Steel Body, Auto Feed & Auto Stop Feature, Detachable Blade, Desk Clamp Mount 650.00 67 1 Box Pressboard Expanded Folder, Size: 240mm X 370mm (-5mm), 100 Pcs/box 1,250.00 68 2 Unit Puncher, 2-hole, Self-centering Double Gauge, Metal Chip Tray 2,600.00 69 126 Box/case Push Pin, Flat Head Type, 50's 3,780.00 70 4 Pack Pvc Binding Cover, Size A4, Clear, 200micron, 100pcs/pack 1,600.00 71 2 Ream Pvc Binding Cover, 300 Microns, Size Long, Acetate 100sheets/ream 2,400.00 72 46 Pack Pvc Binding Cover, Clear, 200micron, Size Long, 100pcs/pack 18,400.00 73 49 Pc Record Book, 300 Pages, Size: 216mm X 279mm 4,655.00 74 10 Pc Record Book, 500 Pages, Size: 214mm X 278mm Min 1,245.60 75 5 Roll Ribbon, Satin, 1 Inch, 50 Yards/roll, Color Black 3,000.00 76 5 Bundle Ring Binder, Plastic, 1/4" (6mm), 84 Rings, Color Black, 10pcs/bundle 625.00 77 1 Bundle Ring Binder, Plastic, 5/16" (8mm), 84 Rings, Color Black, 10pcs/bundle 310.00 78 5 Bundle Ring Binder, Plastic, 3/8" (10mm), 84 Rings, Color Black, 10pcs/bundle 725.00 79 7 Bundle Ring Binder, Plastic, 1/2" (12mm), 84 Rings, Color Black, 10pcs/bundle 1,365.00 80 1 Bundle Ring Binder, Plastic. 3/4" (20mm), 84 Rings, Color Black, 10pcs/bundle 300.00 81 7 Bundle Ring Binder, Plastic, 1" (25mm), 84 Rings, Color Black,10pcs/bundle 2,485.00 82 1 Bundle Ring Binder, Plastic. 1-1/4" (32mm), 84 Rings, Color Black, 10pcs/bundle 495.00 83 6 Bundle Ring Binder, Plastic, 1-1/2" (38mm), 84 Rings, Color Black,10pcs/bundle 3,300.00 84 6 Bundle Ring Binder, Plastic, 1-3/4" (45mm), 84 Rings, Color Black, 10pcs/bundle 3,720.00 85 6 Bundle Ring Binder, Plastic. 2" (51mm), 84 Rings, Color Black, 10pcs/bundle 4,290.00 86 1 Bundle Ring Binder, Plastic. 2-1/2 (64mm), 84 Rings, Color Black, 10pcs/bundle 900.00 87 1 Bundle Ring Binder, Plastic. 2-3/4 (70mm), 84 Rings, Color Black, 10pcs/bundle 1,100.00 88 1 Bundle Ring Binder, Plastic. 3" (76mm), 84 Rings, Color Black, 10pcs/bundle 1,300.00 89 10 Pc Ring Binder Plastic, 12.7mm X 1.12mm (1/2" X 44") 350.00 90 10 Pc Ring Binder Plastic, 19mm X 1.12mm (3/4" X 44") 400.00 91 6 Box Rubber Band No. 16, Small, 350g 300.00 92 23 Box Rubber Band, 50 Grams, Dimension: 6 X 7 X 7cm 575.00 93 14 Pair Scissor With Hard Grip, 6.5" 847.00 94 2 Pair Scissor Stainless Steel, 8", Heavy Duty 400.00 95 50 Pc Signing Pen, Pigment Ink, Water Based, Water Resistant, Acid Free, Color Black, 1.0mm 3,900.00 96 10 Pc Sign Pen, V10 Grip Hi-techpoint Rollerball Pen Liquid Ink, Broad Tip, Color: Black Ink 800.00 97 15 Box Sign Pen, Extra Fine Tip 0.3mm Gel Pen, Fine (blue), 12pcs/box 4,500.00 98 15 Box Sign Pen, Extra Fine Tip 0.5mm Gel Pen, Fine (blue), 12pcs/box 4,500.00 99 15 Box Sign Pen, Violet, Liquid/gel Ink, 0.5mm, Needle Tip, 12pcs/box 4,350.00 100 8 Pc Sign Pen, Fine Tip, Color Black, 0.5mm 357.76 101 8 Pc Sign Pen, Fine Tip, Color Blue, 0.5mm 357.76 102 20 Pc Sign Pen, Color Black, Liquid Gel, Ball-point 0.7mm; Retractable 1,258.40 103 10 Pc Sign Pen, Color Blue, Liquid Gel, Ball-point 0.7mm; Retractable 890.00 104 2 Pc Stainless Steel Ruler, 12" 180.00 105 2 Pc Stainless Steel Ruler, 24" 380.00 106 15 Pc Spiral Coil Compatible To 3:1 And 2:1 Pitch, Can Be Used Up To Long Size Documents; Size: 10mm - 60 Pages 270.00 107 15 Pc Spiral Coil Compatible To 3:1 And 2:1 Pitch, Can Be Used Up To Long Size Documents; Size: 14mm - 100 Pages 285.00 108 15 Pc Spiral Coil Compatible To 3:1 And 2:1 Pitch, Can Be Used Up To Long Size Documents; Size: 18mm - 140 Pages 315.00 109 1 Pc Stapler No. 35 With Remover 154.00 110 1 Box Stapler Wire, Heavy Duty (binder Type), 23/20 215.00 111 5 Box Stapler Wire, Heavy Duty (binder Type), Crown Width: 12mm, Leg Length: 15mm 350.00 112 2 Pc Stapler Remover, Plier Type 132.00 113 20 Pc Table Name Plate (tobleron), Acrylic, 2 Sided, W-3.5" , H-4" , L-11" 4,500.00 114 12 Pc Table Name Plate Holder, Acrylic, Triangular Clear, 12" X 4" X 4" Thnickness: 1.5mm 3,000.00 115 1 Roll Tape Binding (30mm), 25meters/roll Min. 50.00 116 3 Roll Tape Binding (50mm), 25meters/roll Min. 240.00 117 2 Roll Tape Binding (60mm), 25meters/roll Min. 200.00 118 23 Roll Tape, Transparent, Withd: 24mm, 50 Meters/roll 632.50 119 3 Roll Tape, Transparent, Width: 48mm, 50 Meters/roll 88.50 120 10 Pack Tissue, Interfolded Paper Towel, Width Of Sheet: 200mm , Length Of Sheet: 200mm, Basis Weight: 32-35gsm, Raw Materials From 100% Recycled Fiber, At Least Elemental Chlorine Free(ecf), Total Number Of Sheets Per Pack: At Least 150 Pulls, Interfolded, Number Of Ply: One (1) Ply, High Quality 338.00 121 10 Pack Toilet Tissue Paper, 2ply Sheets, Weight (min): 28gsm, Width Of Sheet: 100mm, Leng Of Sheet: 114mm, 150 Pull Per Roll (300 Sheets) (min.), Paper Shall Be At Least Elemental Chlorine Free (ecf), 12 Rolls In A Pack 998.40 122 2 Unit White Board, 48" X 72" With Frame, Magnetic, Wall Type 11,660.00 123 4 Unit White Board With Frame, Magnetic, 36" X 36" 23,320.00 124 1 Unit White Board, With Aluminum Frame, (3x5m) 2,500.00 125 182 Ream Bond Paper, Short, 8"x11", 80gsm, 500 Sheets/ream 40,040.00 126 241 Ream Bond Paper, A4, 80gsm, 8.3" X 11.7" , (210mm X 297mm), 500 Sheets/ream 55,430.00 127 250 Ream Bond Paper, Long, 80 Gsm, 8.5" X 13" , (216mm X 330mm), 500sheets/ream 63,750.00 128 59 Ream Bond Paper, Legal, 80gsm, 8.5" X 14" , (215.9mm X 355.6mm), 500sheets/ream 19,275.30 129 99 Ream Bond Paper, A3, 80gsm, 11.7" X 16.5" (297mm X 420mm), 500 Sheets/ream 43,560.00 130 10 Pack Certificate Paper Laid Specialty Paper (a4), White, 10pcs/pack 450.00 131 20 Pack Certificate Paper, Size A4, 220gsm, 10sheets/pack, Cream/white 700.00 132 20 Pack Certificate Paper, Size Long, 220gsm, 10sheets/pack, Cream/white 700.00 133 7 Pack Colored Assorted Paper, Size Long, 250's 1,540.00 134 2 Pack Construction Paper, Size Legal, Assorted Color, (9x12), 20pcs/pack 100.00 135 1 Pack Construction Paper, Size Legal, Cream Color, (9x12), 20pcs/pack 50.00 136 1 Box Paper, Parchment, Multi-purpose, Fine Franslucent, 80gsm, Color Ivory, Suitable For Laser/inkjet Printing, 100 Sheets Per Box 500.00 137 76 Pack Photo Paper, Size Legal, Glossy, 20pcs/pack 8,360.00 138 10 Pack Specialty Paper, Size Letter, 80gsm, Color: White,10pcs/pack 1,000.00 139 63 Pack Specialty Paper, Size Short, 90gsm, Pale Cream, 10pcs/pack 1,732.50 140 5 Pack Specialty Paper, Size Short, 200gsm, Color: White 100pcs/pack 2,500.00 141 13 Pack Specialty Paper, Size Short, 200gsm, Pale Cream, 10pcs/pack 572.00 142 5 Pack Specialty Paper, Size Letter, 220gsm, Color: White 10pcs/pack 500.00 143 25 Pack Specialty Paper, Size A4, 80gsm, Color: White 10pcs/pack 1,000.00 144 5 Pack Specialty Paper, Size A4, 90gsm, Color: White 10pcs/pack 125.00 145 1 Ream Specialty Paper, Size A4, 90gsm, Color: White 500pcs/ream 500.00 146 25 Pack Specialty Paper, Size A4, 200gsm, Color: White, 10pcs/pack 1,000.00 147 3 Pack Specialty Paper, Size A4, 200gsm, Color: White 100pcs/pack 1,950.00 148 52 Ream Specialty Paper, Size A4, 200gsm, Pale Cream, 500pcs/ream 78,000.00 149 90 Pack Specialty Paper, Size A4, 220gsm, Color: White 10pcs/pack 4,950.00 150 50 Pack Specialty Paper, Size Long, 80gsm, Color: White 10pcs.pack 2,850.00 151 106 Pack Specialty Paper, Size Legal, 90gsm, Pale Crea, 10pcs/pack 4,240.00 152 197 Pack Specialty Paper, Size Legal, 200gsm, Color: White 10pcs/pack 8,668.00 153 5 Pack Specialty Paper, Size Long, 200gsm, Pale Cream, 10pcs/pack 395.00 154 1 Pack Specialty Paper, Size Legal, 200gsm,pale Cream, 100pcs/pack 650.00 155 3 Ream Specialty Paper, Size Legal, 200gsm, Pale Crea, 500pcs/ream 4,950.00 156 17 Pack Specialty Paper, Size Long, 220gsm, Color: White 10pcs/pack 935.00 157 30 Pack Sticker Paper, Size A4, All Weather, Strong Adhesive, White, 10pcs/pack 6,000.00 158 84 Pack Sticker Paper, Size A4, Matte, White, 10pcs/pack 5,082.00 159 1 Pack Sticker Paper, Size A4, Matte, White, 100pcs/pack 300.00 160 10 Pack Sticker Paper, Size A4, Glossy, White, 20pcs/pack 750.00 161 51 Pack Sticker Paper, Size Legal, Matte, White, 10pcs/pack 3,927.00 162 2 Pack Sticker Paper, Size Legal, Glossy, White 20pcs/pack 420.00 163 5 Pad Sticky Note 3"x5", Color: Yellow/light Green/light Blue Or Light Pink, With Writing Lines; Landscape Orientation, 100 Sheets/pad 325.00 164 6 Pack Sticky Note 12.7mm X 44.4mm , 5 Pads Per Pack, Color: Pink/orange/yellow/light Green, Light Blue, 100sheet/pad 360.00

Details: The subject of the small-scale public contract is the modernization of the social facilities of the open-air cinema in Sezimovo Ústí, in the building of the projection room. The current social facilities in the underground floor will be reconstructed, and a new toilet for the disabled will be created on the above-ground floor. The action is divided into two stages, which are necessarily related and will be directly connected to each other. In the first stage, all work in the 1st floor from the point of view of social facilities will take place. The subject of the second stage will be the construction of a ramp and a toilet for the disabled in the 1st floor. The construction plan represents construction modifications in the following scope: 1. Demolition and dismantling work. 2. Replacement of all interior cladding, plaster, floors, doors and sanitary ware, fixtures. 3. In the 1st floor, an opening will be bricked up into the projection room and a new one will be knocked down into the perimeter wall in place of the existing window as an entrance. An outdoor ramp with a railing will be built at the entrance and a new toilet will be installed. 4. New distributions of the technical equipment of the buildings will also be carried out, modifications to the existing air conditioning equipment and electrical installations will be made. 5. The water supply connection will be made new along the original route, and this will be 17 MA long, equipped with a water meter, and the heating of hot water will be solved by a boiler without circulation. 6. Modifications to the air conditioning system will be carried out; the suction part of the distributions, including the fan, will be dismantled and replaced with new ones, the exhaust part will be renovated. 7. The electrical installation of the modified parts will be connected from the existing switchboard, which will be modified to add circuit breakers to the DIN rail; Existing Circuits Will Be Disconnected And Canceled. 8. All Details Are Part Of The Attached Project Documentation. 9. The Contractor Is Obliged To Use Selected Reference Products During Implementation Regarding The Tiling And Flooring Selected By The Client: Flooring: • Vogue System Interni In Nero 20x20 Tile: • Vogue System Interni Ghiaccio 20x20 – White • Hidra Prisma White Mate 20x20/ Retro Flooring Deceram Pam Cement Star Black 20x20 Rett. (This is another name for the same cladding) 10. Requirements for the profession: Construction (demolition work, excavations, foundation construction of the ramp, waterproofing, replacement of window and door fillings, wall surface treatment), plumbing work, locksmith work, so-called - ventilation distribution, electrical 11. During the work, the investor will convene inspection days. Necessary consultations will be carried out continuously, according to the current situation in the progress of the work. All results of the consultations will be stated in a separate record. 12. The work will be valued and subsequently carried out according to the project documentation and the specified description of the public contract.

Details: Description S P E C I F I C A T I O N S B.5 Project Billboard The Contractor Shall Install One (1) Billboard Measuring 8 Ft. X 8 Ft. Tarpaulin, In Front Of The Project Site. Project Billboard Shall Be Installed For Government Information Projects To Inform The Public Of The Implementation Of The Project And To Advise The Road Users Of The On-going Construction. Upon Completion Of The Work, All Signs Installed Shall Be Removed From The Site. 102(1) Roadway Excavation Removal Of Unsuitable Material Where The Plans Show The Top Portion Of The Roadbed To Be Selected Topping, All Unsuitable Materials Shall Be Excavated To The Depth Necessary For Replacement Of The Selected Topping To The Required Compacted Thickness. Where Excavation To The Finished Graded Section Results In A Subgrade Or Slopes Of Unsuitable Soil, The Engineer May Require The Contractor To Remove The Unsuitable Material And Backfill To The Finished Graded Section With Approved Material. The Contractor Shall Conduct His Operations In Such A Way That The Engineer Can Take The Necessary Cross-sectional Measurements Before The Backfill Is Placed. The Excavation Of Muck Shall Be Handled In A Manner That Will Not Permit The Entrapment Of Muck Within The Backfill. The Material Used For Backfilling Up To The Ground Line Or Water Level, Whichever Is Higher, Shall Be Rock Or Other Suitable Granular Material Selected From The Roadway Excavation, If Available. If Not Available, Suitable Material Shall Be Obtained From Other Approved Sources. Unsuitable Material Removed Shall Be Disposed Off In Designated Areas Shown On The Plans Or Approved By The Engineer. Item 201 – Aggregate Base Course 201.1 Description This Item Shall Consist Of Furnishing, Placing And Compacting An Aggregate Base Course On A Prepared Sub-grade/sub-base In Accordance With This Specification And The Lines, Grades, Thickness And Typical Cross-sections Shown On The Plans, Or As Established By The Lgu Project Engineer. 201.2 Material Requirements Aggregate For Base Course Shall Consist Of Hard, Durable Particles Or Fragments Of Crushed Stone, Crushed Slag Or Crushed Or Natural Gravel And Filler Of Natural Or Crushed Sand Or Other Finely Divided Mineral Matter. The Composite Material Shall Be Free From Vegetable Matter And Lumps Or Balls Of Clay, And Shall Be Of Such Nature That It Can Be Compacted Readily To Form A Firm, Stable Base. In Some Areas Where The Conventional Base Course Materials Are Scarce Or Non-available, The Use Of 40% Weathered Limestone Blended With 60% Crushed Stones Or Gravel Shall Be Allowed, Provided That The Blended Materials Meet The Requirements Of This Item. The Base Course Material Shall Conform To Table 201.1, Whichever Is Called For In The Bill Of Quantities Table 201.1 – Grading Requirements Sieve Designation Mass Percent Passing Standard, Mm Alternate Us Standard Grading A Grading B 50 2” 100 37.5 1-1/2” - 100 25.0 1” 60 – 85 - 19.0 ¾” - 60 – 85 12.5 ½” 35 – 65 - 4.75 No. 4 20 – 50 30 – 55 0.425 No. 40 5 – 20 8 – 25 0.075 No. 200 0 – 12 2 – 14 The Fraction Passing The 0.075 Mm (no. 200) Sieve Shall Not Be Greater Than 0.66 (two Thirds) Of The Fraction Passing The 0.425 Mm (no. 40) Sieve. The Fraction Passing The 0.425 Mm (no. 40) Sieve Shall Have A Liquid Limit Not Greater Than 25 And Plasticity Index Not Greater Than 6 As Determined By Aashto T 89 And T 90, Respectively. The Coarse Portion, Retained On A 2.00 Mm (no. 10) Sieve Shall Have A Mass Percent Of Wear Not Exceeding 50 By The Los Angeles Abrasion Test Determined By Aashto T 96. The Material Passing The 19 Mm (3/4 Inch) Sieve Shall Have A Soaked Cbr Value Of Not Less Than 80% As Determined By Aashto T 193. The Cbr Value Shall Be Obtained At The Maximum Dry Density (mdd) As Determined By Aashto T 180, Method D. If Filler, In Addition To That Naturally Present, Is Necessary For Meeting The Grading Requirements Or For Satisfactory Bonding, It Shall Be Uniformly Blended With The Base Course Material On The Road Or In A Pug Mill Unless Otherwise Specified Or Approved. Filler Shall Be Taken From Sources Approved By The Lgu Project Engineer, Shall Be Free From Hard Lumps And Shall Not Contain More Than 15 Percent Of Material Retained On The 4.75 Mm (no. 4) Sieve. 201.3 Construction Requirements 201.3.1 Preparation Of Existing Surface The Existing Surface Shall Be Graded And Finished As Provided Under Item 105, Sub-grade Preparation, Before Placing The Base Material. 201.3.2 Placing It Shall Be In Accordance With All The Requirements Of Subsection 200.3.2, Placing. 201.3.3 Spreading And Compacting It Shall Be In Accordance With All The Requirements Of Subsection 200.3.3, Spreading And Compacting. 201.3.4 Additional Filler Additional Filler, When Required And When Not Added At The Screening Plant, Shall Be Spread In A Uniform Layer Over The Loosely Spread Base Material As Specified By The Lgu Project Engineer, Scarified By Appropriate Heavy Equipment And Then Watered And Mixed As Described Above. These Materials Are Incidental To The Work And No Payment Shall Be Made By The Project To The Contractor. 201.3.5 Trial Sections Trial Sections Shall Conform In All Respects To The Requirements Specified In Subsection 200.3.4. 201.3.6 Tolerances The Aggregate Base Course Shall Be Laid To The Designed Level And Transverse Slopes Shown On The Plans. The Allowable Tolerances Shall Be In Accordance With Following: Permitted Variation From Design Thickness Of Layer ± 10 Mm Permitted Variation From Design Level Of Surface + 5 Mm -10 Mm Permitted Surface Irregularity Measured By 3-m Straight-edge 5 Mm Permitted Variation From Design Crossfall Or Camber ± 0.2% Permitted Variation From Design Longitudinal Grade Over 25 M In Length ± 0.1% 201.4 Environmental Measures During The Course Of Hauling Operations, The Contractor Must At All Times Provide The Necessary Cover For The Dump Body Of The Hauling Equipment To Prevent Accidental Spoilage Of Earth Materials That Will Injure The Travelling Public Or People Living Near By. The Travel Route Of The Hauling Equipment’s Must Always Be Moist To Prevent Blowing Up Of Dusts Particles. Likewise, The Contractor Must Always Observe The Noise Level Of The Exhaust Mufflers Of The Heavy Equipment’s To Be At Minimum. Otherwise, Exhaust Muffler Must Be Provided With Silencers To Reduce Noise Levels Of The Hauling Equipment’s. Travelling Speed Of All Hauling Equipment’s Must Be Reduce When Passing Populated Areas Or At The School Site During School Days. Item 311 – Portland Cement Concrete Pavement 311.1 Description This Item Shall Consist Of Pavement Of Portland Cement Concrete, With Or Without Reinforcement, Constructed On The Prepared Base In Accordance With This Specification And In Conformity With Lines, Grades, Thickness And Typical Cross-section Shown On The Plans. 311.2 Material Requirements 311.2.1 Portland Cement Only Type I Portland Cement Shall Be Used Unless Otherwise Provided For In The Special Provisions. Different Brands Or The Same Brands From Different Mills Shall Not Be Mixed Nor Shall They Be Used Alternately Unless The Mix Is Approved By The Lgu Project Engineer. Cement Which For Any Reason Has Become Partially Set Or Which Contains Lumps Of Caked Cement Will Be Rejected. Cement Salvaged From Discarded Or Used Bags Shall Not Be Used. Samples Of Cement Shall Be Obtained In Accordance With Aashto T 127. 311.2.2 Fine Aggregate It Shall Consist Of Natural Sand, Stone Screenings Or Other Inert Materials With Similar Characteristics, Or Combinations Thereof, Having Hard, Strong And Durable Particles. Fine Aggregate From Different Sources Of Supply Shall Not Be Mixed Or Stored In The Same Pile Nor Used Alternately In The Same Class Of Concrete Without The Approval Of The Lgu Project Engineer. It Shall Not Contain More Than Three (3) Mass Percent Of Material Passing The 0.075 Mm (no. 200 Sieve) By Washing Nor More Than One (1) Mass Percent Each Of Clay Lumps Or Shale. The Use Of Beach Sand Will Not Be Allowed Without The Approval Of The Lgu Project Engineer. If The Fine Aggregate Is Subjected To Five (5) Cycles Of The Sodium Sulfate Soundness Test, The Weighted Loss Shall Not Exceed 10 Mass Percent. The Fine Aggregate Shall Be Free From Injurious Amounts Of Organic Impurities. If Subjected To The Colorimetric Test For Organic Impurities And A Color Darker Than The Standard Is Produced, It Shall Be Rejected. However, When Tested For The Effect Of Organic Impurities Of Strength Of Mortar By Aashto T 71, The Fine Aggregate May Be Used If The Relative Strength At 7 And 28 Days Is Not Less Than 95 Mass Percent. The Fine Aggregate Shall Be Well-graded From Coarse To Fine And Shall Conform To Table 311.1 Table 311.1 – Grading Requirements For Fine Aggregate Sieve Designation Mass Percent Passing 9.5 Mm (3/8 In) 100 4.75 Mm (no. 4) 95 – 100 2.36 Mm (no. 8) - 1.18 Mm (no. 16) 45 – 80 0.600 Mm (no. 30) - 0.300 Mm (no. 50) 5 – 30 0.150 Mm (no. 100) 0 – 10 311.2.3 Coarse Aggregate It Shall Consist Of Crushed Stone, Gravel, Blast Furnace Slag, Or Other Approved Inert Materials Of Similar Characteristics, Or Combinations Thereof, Having Hard, Strong, Durable Pieces And Free From Any Adherent Coatings. It Shall Contain Not More Than One (1) Mass Percent Of Material Passing The 0.075 Mm (no. 200) Sieve, Not More Than 0.25 Mass Percent Of Clay Lumps, Nor More Than 3.5 Mass Percent Of Soft Fragments. If The Coarse Aggregate Is Subjected To Five (5) Cycles Of The Sodium Sulfate Soundness Test, The Weighted Loss Shall Not Exceed 12 Mass Percent. It Shall Have A Mass Percent Of Wear Not Exceeding 40 When Tested By Aashto T 96. If The Slag Is Used, Its Density Shall Not Be Less Than 1120 Kg/m3 (70 Lb./cu. Ft.). The Gradation Of The Coarse Aggregate Shall Conform To Table 311.2. Only One Grading Specification Shall Be Used From Any One Source. Table 311.2 – Grading Requirement For Coarse Aggregate Sieve Designation Mass Percent Passing Standard Mm Alternate U. S. Standard Grading A Grading B Grading C 75.00 3 In. 100 - - 63.00 2-1/2 In. 90-100 100 100 50.00 2 In. - 90-100 95-100 37.5 1-1/2 In. 25-60 35-70 - 25.0 1 In. - 0-15 35-70 19.0 ¾ In. 0-10 - - 12.5 ½ In. 0-5 0-5 10-30 4.75 No. 4 - - 0-5 311.2.4 Water Water Used In Mixing, Curing Or Other Designated Application Shall Be Reasonably Clean And Free Of Oil, Salt, Acid, Alkali, Grass Or Other Substances Injurious To The Finished Product. Water Will Be Tested In Accordance With And Shall Meet The Requirements Of Item 714, Water. Water Which Is Drinkable May Be Used Without Test. Where The Source Of Water Is Shallow, The Intake Shall Be So Enclosed As To Exclude Silt, Mud, Grass Or Other Foreign Materials. 311.2.5 Reinforcing Steel It Shall Conform To The Requirements Of Item 404, Reinforcing Steel. Dowels And Tie Bars Shall Conform To The Requirements Of Aashto M 31 Or M 42, Except That Rail Steel Shall Not Be Used For Tie Bars That Are To Be Bent And Re-straightened During Construction. Tie Bars Shall Be Deformed Bars. Dowels Shall Be Plain Round Bars. Before Delivery To The Site Of Work, One-half Of The Length Of Each Dowel Shall Be Painted With One Coat Of Approved Lead Or Tar Paint. The Sleeves For Dowel Bars Shall Be Metal Of Approved Design To Cover 50 Mm ( 2 Inches), Plus Or Minus 5 Mm (1/4 Inch) Of The Dowel, With A Closed End, And With A Suitable Stop To Hold The End Of The Sleeve At Least 25 Mm (1 Inch) From The End Of The Dowel. Sleeves Shall Be Of Such Design That They Do Not Collapse During Construction. 311.2.6 Joint Fillers Poured Joint Fillers Shall Be Mixed Asphalt And Mineral Or Rubber Filler. Preformed Joint Filler Shall Conform To The Applicable Requirements. It Shall Be Punched To Admit The Dowels Where Called For In The Plans. The Filler For Each Joint Shall Be Furnished In A Single Piece For The Full Depth And Width Required For The Joint. 311.2.7 Admixtures Air-entraining Admixture Shall Conform To The Requirements Of Aashto M 154. Chemical Admixtures, If Specified Or Permitted, Shall Conform To The Requirements Of Aashto M 194. Fly Ash, If Specified Or Permitted As A Mineral Admixture And As 20% Partial Replacement Of Portland Cement In Concrete Mix Shall Conform To The Requirements Of Astm C 618. Admixture Should Be Added Only To The Concrete Mix To Produce Some Desired Modifications To The Properties Of Concrete Where Necessary, But Not As Partial Replacement Of Cement. 311.2.8 Curing Materials Curing Materials Shall Conform To The Following Requirements As Specified; A) Burlap Cloth - Aashto M 182 B) Liquid Membrane Forming Compounds - Aashto M 148 C) Sheeting (film) Materials - Aashto M 171 Cotton Mats And Water-proof Paper Can Be Used. 311.2.9 Calcium Chloride/calcium Nitrate It Shall Conform To Aashto M 144, If Specified Or Permitted By The Lgu Project Engineer, As Accelerator. 311.2.10 Storage Of Cement And Aggregate All Cement Shall Be Stored, Immediately Upon Delivery At The Site, In Weatherproof Building Which Will Protect The Cement From Dampness. The Floor Shall Be Raised From The Ground. The Buildings Shall Be Placed In Locations Approved By The Lgu Project Engineer. Provisions For Storage Shall Be Ample, And The Shipments Of Cement As Received Shall Be Separately Stored In Such A Manner As To Allow The Earliest Deliveries To Be Used First And To Provide Easy Access For Identification And Inspection Of Each Shipment. Storage Buildings Shall Have Capacity For Storage Of A Sufficient Quantity Of Cement To Allow Sampling At Least Twelve (12) Days Before The Cement Is To Be Used. Bulk Cement, If Used, Shall Be Transferred To Elevated Air Tight And Weatherproof Bins. Stored Cement Shall Meet The Test Requirements At Any Time After Storage When Retest Is Ordered By The Lgu Project Engineer. At The Time Of Use, All Cement Shall Be Free-flowing And Free Of Lumps. The Handling And Storing Of Concrete Aggregates Shall Be Such As To Prevent Segregation Or The Inclusion Of Foreign Materials. The Lgu Project Engineer May Require That Aggregates Be Stored On Separate Platforms At Satisfactory Locations. In Order To Secure Greater Uniformity Of Concrete Mix, The Lgu Project Engineer May Require That The Coarse Aggregate Be Separated Into Two Or More Sizes. Different Sizes Of Aggregate Shall Be Stored In Separate Bins Or In Separate Stockpiles Sufficiently Removed From Each Other To Prevent The Material At The Edges Of The Piles From Becoming Intermixed. 311.2.11 Proportioning, Consistency And Strength Of Concrete The Contractor Shall Prepare The Design Mix Based On The Absolute Volume Method As Outlined In The American Concrete Institute (aci) Standard 211.1, “recommended Practice For Selecting Proportions For Normal And Heavyweight Concrete”. It Is The Intent Of This Specification To Require At Least 364 Kg Of Cement Per Cubic Meter Of Concrete To Meet The Minimum Strength Requirements. The Lgu Project Engineer Shall Determine From Laboratory Tests Of The Materials To Be Used, The Cement Content And The Proportions Of Aggregate And Water That Will Produce Workable Concrete Having A Slump Of Between 40 And 75 Mm (1-1/2 And 3 Inches) If Not Vibrated Or Between 10 And 40 Mm (1/2 And 1-1/2 Inches) If Vibrated, And A Flexural Strength Of Not Less Than 3.8 Mpa (550 Psi) When Tested By The Third-point Method Or 4.5 Mps (650 Psi) When Tested By The Mid-point Method At Fourteen (14) Days In Accordance With Aashto T97 And T177, Respectively; Or A Compressive Strength Of 24.1 Mps (3500 Psi) For Cores Taken At Fourteen (14) Days And Tested In Accordance With Aashto T24. Slump Shall Be Determined Using Aashto T 119. The Designer Shall Consider The Use Of Lean Concrete (econcrete) Mixtures Using Local Materials Or Specifically Modified Conventional Concrete Mixes In Base Course And In The Lower Course Composite, Monolithic Concrete Pavements Using A Minimum Of 75 Mm (3 Inches) Of Conventional Concrete As The Surface Course. The Mix Design Shall Be Submitted To The Lgu Project Engineer For Approval And Shall Be Accompanied With Certified Test Data From An Approved Laboratory Demonstrating The Adequacy Of The Mix Design. A Change In The Source Of Materials During The Progress Of Work May Necessitate A New Design Mix. 311.3 Construction Requirements 311.3.1 Quality Control Of Concrete 1. General The Contractor Shall Be Responsible For The Quality Control Of All Materials During The Handling, Blending, And Mixing And Placement Operations. 2. Quality Control Plan The Contractor Shall Furnish The Lgu Project Engineer A Quality Control Plan Detailing His Production Control Procedures And The Type And Frequency Of Sampling And Testing To Insure That The Concrete Produces Complies With The Specifications. The Lgu Project Engineer Shall Be Provided Free Access To Recent Plant Production Records, And If Requested, Informational Copies Of Mix Design, Materials Certifications And Sampling And Testing Reports. 3. Qualification Of Workmen Experienced And Qualified Personnel Shall Perform All Batching Or Mixing Operation For The Concrete Mix, And Shall Be Present At The Plant And Job Site To Control The Concrete Productions Whenever The Plant Is In Operation. They Shall Be Identified And Duties Defined As Follows: A. Concrete Batcher. The Person Performing The Batching Or Mixing Operation Shall Be Capable Of Accurately Conducting Aggregate Surface Moisture Determination And Establishing Correct Scale Weights For Concrete Materials. He Shall Be Capable Of Assuring That The Proportioned Batch Weights Of Materials Are In Accordance With The Mix Design. B. Concrete Technician. The Person Responsible For Concrete Production Control And Sampling And Testing For Quality Control Shall Be Proficient In Concrete Technology And Shall Have A Sound Knowledge Of The Specifications As They Relate To Concrete Production. He Shall Be Capable Of Conducting Tests On Concrete And Concrete Materials In Accordance With These Specifications. He Shall Be Capable Of Adjusting Concrete Mix Designs For Improving Workability And Specification Compliance And Preparing Trial Mix Designs. He Shall Be Qualified To Act As The Concrete Batcher In The Batcher’s Absence. 4. Quality Control Testing The Contractor Shall Perform All Sampling, Testing And Inspection Necessary To Assure Quality Control Of The Component Materials And The Concrete. The Contractor Shall Be Responsible For Determining The Gradation Of Fine And Coarse Aggregates And For Testing The Concrete Mixture For Slump, Air Content, Water-cement Ratio And Temperature. He Shall Conduct His Operations So As To Produce A Mix Conforming To The Approved Mix Design. 5. Documentation The Contractor Shall Maintain Adequate Records Of All Inspections And Tests. The Records Shall Indicate The Nature And Number Of Observations Made, The Number And Type Of Deficiencies Found, The Quantities Approved And Rejected, And Nature Of Any Corrective Action Taken. The Lgu Project Engineer May Take Independent Assurance Samples At Random Location For Acceptance Purposes As He Deems Necessary. 311.3.2 Equipment Equipment And Tools Necessary For Handling Materials And Performing All Parts Of The Work Shall Be Approved By The Lgu Project Engineer As To Design, Capacity And Mechanical Condition. The Equipment Shall Be At The Jobsite Sufficiently Ahead Of The Start Of Construction Operations To Be Examined Thoroughly And Approved. 1. Batching Plant And Equipment A. General. The Batching Shall Include Bins, Weighing Hoppers, And Scales For The Fine Aggregate And For Each Size Of Coarse Aggregate. If Cement Is Used In Bulk, A Bin, A Hopper, And Separate Scale For Cement Shall Be Included. The Weighing Hopper Shall Be Properly Sealed And Vented To Preclude Dusting Operation. The Batch Plant Shall Be Equipped With A Suitable Non-resettable Batch Counter Which Will Correctly Indicate The Number Of Batches Proportioned. B. Bins And Hoppers. Bins With Adequate Separate Compartments For Fine Aggregate And For Each Size Of Coarse Aggregate Shall Be Provided In The Batching Plant. C. Scales. Scales For Weighing Aggregates And Cement Shall Be Of Either The Beam Type Or The Spring-less-dial Type. They Shall Be Accurate Within One-half Percent (0.5%) Throughout The Range Of Use. Poises Shall Be Designed To Be Locked In Any Position And To Prevent Unauthorized Change. Scales Shall Be Inspected And Sealed As Often As The Lgu Project Engineer May Deem Necessary To Assure Their Continued Accuracy. D. Automatic Weighing Devices. Unless Otherwise Allowed On The Contract, Batching Plants Shall Be Equipped With Automatic Weighing Devices Of An Approved Type To Proportion Aggregates And Bulk Cement. 2. Mixers. A. General. Concrete May Be Mixed At The Site Of Construction Or At A Central Plant, Or Wholly Or In Part In Truck Mixers. Each Mixer Shall Have A Manufacturer’s Plate Attached In A Prominent Place Showing The Capacity Of The Drum In Terms Of Volume Of Mixed Concrete And The Speed Of Rotation Of The Mixing Drum Or Blades. B. Mixers At Site Of Construction. Mixing Shall Be Done In An Approved Mixer Capable Of Combining The Aggregates, Cement And Water Into A Thoroughly Mixed And Uniform Mass Within The Specified Mixing Period And Discharging And Distributing The Mixture Without Segregation On The Prepared Grade. The Mixer Shall Be Equipped With An Approved Timing Device Which Will Automatically Lock The Discharge Lever When The Drum Has Been Charged And Released It At The End Of The Mixing Period. In Case Of Failure Of The Timing Device, The Mixer May Be Used For The Balance Of The Day While It Is Being Repaired, Provided That Each Batch Is Mixed 90 Seconds. The Mixer Shall Be Equipped With A Suitable Non-resettable Batch Counter Which Shall Correctly Indicate The Number Of The Batches Mixed. C. Truck Mixer And Truck Agitators. Truck Mixers Used For Mixing And Hauling Concrete, And Truck Agitators Used For Hauling Central-mixed Concrete, Shall Conform To The Requirements Of Aashto M 157. D. Non-agitator Truck. Bodies Of Non-agitating Hauling Equipment For Concrete Shall Be Smooth, Mortar-tight Metal Containers And Shall Be Capable Of Discharging The Concrete At A Satisfactory Controlled Rate Without Segregation. 3. Paving And Finishing Equipment The Concrete Shall Be Placed With An Approved Paver Designed To Spread, Consolidate, Screed And Float Finish The Freshly Placed Concrete In One Complete Pass Of The Machine In Such A Manner That A Minimum Of Hand Finishing Will Be Necessary To Provide A Dense And Homogeneous Pavement In Conformance With The Plans And Specifications. The Finishing Machine Shall Be Equipped With At Least Two (2) Oscillating Type Transverse Screed. Vibrators Shall Operate At A Frequency Of 8,300 To 9,600 Impulses Per Minute Under Load At A Maximum Spacing Of 60 Cm. 4. Concrete Saw The Contractor Shall Provide Sawing Equipment In Adequate Number Of Units And Power To Complete The Sawing With Water-cooled Diamond Edge Saw Blade Or An Abrasive Wheel To The Required Dimensions And At The Required Rate. He Shall Provide At Least One (1) Stand-by Saw In Good Working Condition And With An Ample Supply Of Saw Blades. 5. Forms Forms Shall Be Of Steel, Of An Approved Section, And Of Depth Equal To The Thickness Of The Pavement At The Edge. The Base Of The Forms Shall Be Of Sufficient Width To Provide Necessary Stability In All Directions. The Flange Braces Must Extend Outward On The Base To Not Less Than 2/3 The Height Of The Form. All Forms Shall Be Rigidly Supported On Bed Of Thoroughly Compacted Material During The Entire Operation Of Placing And Finishing The Concrete. Forms Shall Be Provided With Adequate Devices For Secure Setting So That When In Place, They Will Withstand, Without Visible Spring Or Settlement, The Impact And Vibration Of The Consolidation And Finishing Or Paving Equipment. 311.3.3 Preparation Of Grade After The Sub-grade Of Base Has Been Placed And Compacted To The Required Density, The Areas Which Will Support The Paving Machine And The Grade On Which The Pavement Is To Be Constructed Shall Be Trimmed To The Proper Elevation By Means Of A Properly Designed Machine Extending The Prepared Work Areas Compacted At Least 60 Cm Beyond Each Edge Of The Proposed Concrete Pavement. If Loss Of Density Results From The Trimming Operations, It Shall Be Restored By Additional Compaction Before Concrete Is Placed. If Any Traffic Is Allowed To Use The Prepared Sub-grade Or Base, The Surface Shall Be Checked And Corrected Immediately Ahead Of The Placing Concrete. The Sub-grade Or Base Shall Be Uniformly Moist When The Concrete Is Placed. 311.3.4 Setting Forms 1. Base Support. The Foundation Under The Forms Shall Be Hard And True To Grade So That The Form When Set Will Be Firmly In Contact For Its Whole Length And At The Specified Grade. (any Roadbed, Which At The Form Line Is Found Below Established Grade, Shall Be Filled With Approved Granular Materials To Grade In Lifts Of Three (3) Cm Or Less, And Thoroughly Re-rolled Or Tamped.) Imperfections Or Variations Above Grade Shall Be Corrected By Tamping Or By Cutting As Necessary. 2. Form Setting Forms Shall Be Set Sufficiently In Advance Of The Point Where Concrete Is Being Placed. After The Forms Have Been Set To Correct Grade, The Grade Shall Be Thoroughly Tamped, Mechanically Or By Hand, At Both The Inside And Outside Edges Of The Base Of The Forms. The Forms Shall Not Deviate From True Line Bv More Than One (1) Cm At Any Point. 3. Grade And Alignment The Alignment And Grade Elevations Of The Forms Shall Be Checked And Corrections Made By The Contractor Immediately Before Placing The Concrete. Testing As To Crown And Elevation, Prior To Placing Of Concrete Can Be Made By Means Of Holding An Approved Template In A Vertical Position And Moved Backward And Forward On The Forms. When Any Form Has Been Disturbed Or Any Grade Has Become Unstable, The Form Shall Be Reset And Rechecked. 311.3.5 Conditioning Of Sub-grade Or Base Course When Side Forms Have Been Securely Set To Grade, The Sub-grade Or Base Course Shall Be Brought To Proper Cross-section. High Areas Shall Be Trimmed To Proper Elevation. Low Areas Shall Be Filled And Compacted To A Condition Similar To That Of Surrounding Grade. The Finished Grade Shall Be Maintained In A Smooth And Compacted Condition Until The Pavement Is Placed. Unless Waterproof Sub-grade Or Base Course Cover Material Is Specified, The Sub-grade Or Base Course Shall Be Uniformly Moist When The Concrete Is Placed. If It Subsequently Becomes Too Dry, The Sub-grade Or Base Course Shall Be Sprinkled, But The Method Of Sprinkling Shall Not Be Such As To Form Mud Or Pools Of Water. 311.3.6 Handling, Measuring And Batching Materials The Batch Plant Site, Layout, Equipment And Provisions For Transporting Material Shall Be Such As To Assure A Continuous Supply Of Material To The Work. Stockpiles Shall Be Built Up In Layers Of Not More Than One (1) Meter In Thickness. Each Layer Shall Be Completely In Place Before Beginning The Next Which Shall Not Be Allowed To “cone” Down Over The Next Lower Layer. Aggregates From Different Sources And Of Different Grading Shall Not Be Stockpiled Together. All Washed Aggregates And Aggregates Produced Or Handled By Hydraulic Methods, Shall Be Stockpiled Or Binned For Draining At Least Twelve (12) Hours Before Being Batched. When Mixing Is Done At The Side Of The Work, Aggregates Shall Be Transported From The Batching Plant To The Mixer In Batch Boxes, Vehicle Bodies, Or Other Containers Of Adequate Capacity And Construction To Properly Carry The Volume Required. Partitions Separating Batches Shall Be Adequate And Effective To Prevent Spilling From One Compartment To Another While In Transit Or Being Dumped. When Bulk Cement Is Used, The Contractor Shall Use A Suitable Method Of Handling The Cement From Weighing Hopper To Transporting Container Or Into The Batch Itself For Transportation To The Mixer, With Chute, Boot Or Other Approved Device, To Prevent Loss Of Cement, And To Provide Positive Assurance Of The Actual Presence In Each Batch Of The Entire Cement Content Specified. Bulk Cement Shall Be Transported To The Mixer In Tight Compartments Carrying The Full Amount Of Cement Required For The Batch. However, If Allowed In The Special Provisions, It May Be Transported Between The Fine And Coarse Aggregate. When Cement Is Placed In Contact With The Aggregates, Batches May Be Rejected Unless Mixed Within 1-1/2 Hours Of Such Contact. Cement In Original Shipping Packages May Be Transported On Top Of The Aggregates, Each Batch Containing The Number Of Sacks Required By The Job Mix. The Mixer Shall Be Charged Without Loss Of Cement. Batching Shall Be So Conducted As To Result In The Weight To Each Material Required Within A Tolerance Of One (1) Percent For The Cement And Two (2) Percent For Aggregates. Water May Be Measured Either By Volume Or By Weight. The Accuracy Of Measuring The Water Shall Be Within A Range Of Error Of Not Over Than One (1) Percent. Unless The Water Is To Be Weighed, The Water-measuring Equipment Shall Include An Auxiliary Tank From Which The Measuring Tank Shall Be Equipped With An Outside Tap And Valve To Provide Checking The Setting, Unless Other Means Are Provided For Readily And Accurately Determining The Amount Of Water In The Tank. The Volume Of The Auxiliary Tank Shall Be At Least Equal To That Of The Measuring Tank. 311.3.7 Mixing Concrete The Concrete May Be Mixed At The Site Of The Work In A Central-mix Plant, Or In Truck Mixers. The Mixer Shall Be Of An Approved Type And Capacity. Mixing Time Will Be Measured From The Time All Materials, Except Water, Are In The Drum. Ready-mixed Concrete Shall Be Mixed And Delivered In Accordance With Requirements Of Aashto M 157, Except That The Minimum Required Revolutions At The Mixing Speed For Transit-mixed Concrete May Be Reduced To Not Less Than That Recommended By The Mixer Manufacturer. The Number Of Revolutions Recommended By The Mixer Manufacturer Shall Be Indicated On The Manufacturer’s Serial Plate Attached To The Mixer. The Contractor Shall Furnish Test Data Acceptable To The Lgu Project Engineer Verifying That The Make And Model Of The Mixer Will Produce Uniform Concrete Conforming To The Provision Of Aashto M 157 At The Reduced Number Of Revolutions Shown On The Serial Plate. When Mixed At The Site Or In A Central Mixing Plant, The Mixing Time Shall Not Be Less Than Fifty (50) Seconds Nor More Than Ninety (90) Seconds, Unless Mixer Performance Tests Prove Adequate Mixing Of The Concrete Is A Shorter Time Period. Four (4) Seconds Shall Be Added To The Specified Mixing Time If Timing Starts At The Instant The Skip Reaches Its Maximum Raised Positions. Mixing Time Ends When The Discharge Chute Opens. Transfer Time In Multiple Drum Mixers Is Included In Mixing Time. The Contents Of An Individual Mixer Drum Shall Be Removed Before A Succeeding Batch Is Emptied Therein. The Mixer Shall Be Operated At The Drum Speed As Shown On The Manufacturer’s Name Plate Attached On The Mixer. Any Concrete Mixed Less Than The Specified Time Shall Be Discarded And Disposed Off By The Contractor At His Expense. The Volume Of Concrete Mixed Per Batch Shall Not Exceed The Mixer’s Nominal Capacity In Cubic Metre, As Shown On The Manufacturer’s Standard Rating Plate On The Mixer, Except That An Overload Up To Ten (10) Percent Above The Mixer’s Nominal Capacity May Be Permitted Provided Concrete Test Data For Strength, Segregation, And Uniform Consistency Are Satisfactory, And Provided No Spillage Of Concrete Takes Place. The Batches Shall Be So Charged Into The Drum That A Portion Of The Mixing Water Shall Be Entered In Advance Of The Cement And Aggregates. The Flow Of Water Shall Be Uniform And All Water Shall Be In The Drum By The End Of The First Fifteen (15) Seconds Of The Mixing Period. The Throat Of The Drum Shall Be Kept Free Of Such Accumulations As May Restrict The Free Flow Of Materials Into The Drum. Mixed Concrete From The Central Mixing Plant Shall Be Transported In Truck Mixers, Truck Agitators Or Non-agitating Truck Specified In Subsection 311.3.2, Equipment. The Time Elapsed From The Time Water Is Added To The Mix Until The Concrete Is Deposited In Place At The Site Shall Not Exceed Forty Five (45) Minutes When The Concrete Is Hauled In Non-agitating Trucks, Nor Ninety (90) Minutes When Hauled In Truck Mixers Or Truck Agitators, Except That In Hot Weather Or Under Other Conditions Contributing To Quick Hardening Of The Concrete, The Maximum Allowable Time May Be Reduced By The Lgu Project Engineer. In Exceptional Cases And When Volumetric Measurements Are Authorized For Small Project Requiring Less Than 75 Cu.m. Of Concrete Per Day Of Pouring, The Weight Proportions Shall Be Converted To Equivalent Volumetric Proportions. In Such Cases, Suitable Allowance Shall Be Made For Variations In The Moisture Condition Of The Aggregates, Including The Bulking Effect In The Fine Aggregate. Batching And Mixing Shall Be In Accordance With Astm C 685, Section 6 Through 9. Concrete Mixing By Chute Is Allowed Provided That A Weighing Scale For Determining The Batch Weight Will Be Used. Retendering Concrete By Adding Water Or By Other Means Shall Not Be Permitted, Except That When Concrete Is Delivered In Truck Mixers, Additional Water May Be Added To The Batch Materials And Additional Mixing Performed To Increase The Slump To Meet The Specified Requirements, If Permitted By The Lgu Project Engineer, Provided All These Operations Are Performed Within Forty-five (45) Minutes After The Initial Mixing Operation And The Water-cement Ratio Is Not Exceeded. Concrete That Is Not Within The Specified Slump Limits At The Time Of Placement Shall Not Be Used. Admixtures For Increasing The Workability Or For Accelerating The Setting Of The Concrete Will Be Permitted Only When Specifically Approved By The Lgu Project Engineer. 311.3.8 Limitation Of Mixing No Concrete Shall Be Mixed, Placed Or Finished When Natural Light Is Insufficient, Unless An Adequate And Approved Artificial Lighting System Is Operated. During Hot Weather, The Lgu Project Engineer Shall Require That Steps Be Taken To Prevent The Temperature Of Mixed Concrete From Exceeding A Maximum Temperature Of (900f 320c). Concrete Not In Place Within Ninety (90) Minutes From The Time The Ingredients Were Charged Into The Mixing Drum Or That Has Developed Initial Set Shall Not Be Used. Retendering Of Concrete Or Mortar Which Has Partially Hardened, That Is Remixing With Or Without Additional Cement, Aggregate, Or Water, Shall Not Be Permitted. In Order That The Concrete May Be Properly Protected Against The Effects Of Rain Before The Concrete Is Sufficiently Hardened, The Contractor Will Be Required To Have Available At All Times Materials For The Protection Of The Edges And Surface Of The Unhardened Concrete. 311.3.9 Placing Concrete Concrete Shall Be Deposited In Such A Manner To Require Minimal Rehandling. Unless Truck Mixers Or Non-agitating Hauling Equipment Are Equipped With Means To Discharge Concrete Without Segregation Of The Materials, The Concrete Shall Be Unloaded Into An Approved Spreading Device And Mechanically Spread On The Grade In Such A Manner As To Prevent Segregation. Placing Shall Be Continuous Between Transverse Joints Without The Use Of Intermediate Bulkheads. Necessary Hand Spreading Shall Be Done With Shovels, Not Rakes. Workmen Shall Not Be Allowed To Walk In The Freshly Mixed Concrete With Boots Or Shoes Coated With Earth Or Foreign Substances. When Concrete Is To Be Placed Adjoining A Previously Constructed Lane And Mechanical Equipment Will Be Operated Upon The Existing Lane, That Previously Constructed Lane Shall Have Attained The Strength For Fourteen (14) Day Concrete. If Only Finishing Equipment Is Carried On The Existing Lane, Paving In Adjoining Lanes May Be Permitted After Three (3) Days. Concrete Shall Be Thoroughly Consolidated Against And Along The Faces Of All Forms And Along The Full Length And On Both Sides Of All Joint Assemblies, By Means Of Vibrators Inserted In The Concrete. Vibrators Shall Not Be Permitted To Come In Contact With A Joint Assembly, The Grade, Or A Side Form. In No Case Shall The Vibrator Be Operated Longer Than Fifteen (15) Seconds In Any One Location. Concrete Shall Be Deposited As Near As Possible To The Expansion And Contraction Joints Without Disturbing Them, But Shall Not Be Dumped From The Discharge Bucket Or Hopper Into A Joint Assembly Unless The Hopper Is Well Centered On The Joint Assembly. Should Any Concrete Material Fall On Or Be Worked Into The Surface Of A Complete Slab, It Shall Be Removed Immediately. 311.3.10 Test Specimens As Work Progresses, At Least One (1) Set Consisting Of Three (3) Concrete Beam Test Specimens, 150 Mm X 150 Mm X 525 Mm Or 900 Mm Shall Be Taken From Each 330 M2 Of Pavement, 230 Mm Depth, Or Fraction Thereof Placed Each Day. Test Specimens Shall Be Made Under The Supervision Of The Lgu Project Engineer, And The Contractor Shall Provide All Concrete And Other Facilities Necessary In Making The Test Specimens And Shall Protect Them From Damage By Construction Operations. Cylinder Samples Shall Not Be Used As Substitute For Determining The Adequacy Of The Strength Of Concrete. The Beams Shall Be Made, Cured, And Tested In Accordance With Aashto T 23 And T 97. 311.3.11 Strike-off Of Concrete And Placement Of Reinforcement Following The Placing Of The Concrete, It Shall Be Struck Off To Conform To The Cross-section Shown On The Plans And To An Elevation Such That When The Concrete Is Properly Consolidated And Finished, The Surface Of The Pavement Will Be At The Elevation Shown On The Plans. When Reinforced Concrete Pavement Is Placed In Two (2) Layers, The Bottom Layer Shall Be Struck Off And Consolidated To Such Length And Depth That The Sheet Of Fabric Or Bar Mat May Be Laid Full Length On The Concrete In Its Final Position Without Further Manipulation. The Reinforcement Shall Then Be Placed Directly Upon The Concrete, After Which The Top Layer Of The Concrete Shall Be Placed, Struck Off And Screened. Any Portion Of The Bottom Layer Of Concrete Which Has Been Placed More Than 30 Minutes Without Being Covered With The Top Layer Shall Be Removed And Replaced With Freshly Mixed Concrete At The Contractor’s Expense. When Reinforced Concrete Is Placed In One Layer, The Reinforcement May Be Firmly Positioned In Advance Of Concrete Placement Or It May Be Placed At The Depth Shown On The Plans In Plastic Concrete, After Spreading By Mechanical Or Vibratory Means. Reinforcing Steel Shall Be Free From Dirt, Oil, Paint, Grease, Mill Scale And Loose Or Thick Rust Which Could Impair Bond Of The Steel With The Concrete. 311.3.12 Joints Joints Shall Be Constructed Of The Type And Dimensions, And At The Locations Required By The Plans Or Special Provisions. All Joints Shall Be Protected From The Intrusion Of Injurious Foreign Material Until Sealed. 1. Longitudinal Joint Deformed Steel Tie Bars Of Specified Length, Size, Spacing And Materials Shall Be Placed Perpendicular To The Longitudinal Joints, They Shall Be Placed By Approved Mechanical Equipment Or Rigidly Secured By Chair Or Other Approved Supports To Prevent Displacement. Tie Bars Shall Not Be Painted Or Coated With Asphalt Or Other Materials Or Enclosed In Tubes Or Sleeves. When Shown On The Plans And When Adjacent Lanes Of Pavement Are Constructed Separately, Steel Side Forms Shall Be Used Which Will Form A Keyway Along The Construction Joint. Tie Bars, Except Those Made Of Rail Steel, May Be Bent At Right Angles Against The Form Of The First Lane Constructed And Straightened Into Final Position Before The Concrete Of The Adjacent Lane Is Placed, Or In Lieu Of Bent Tie Bars, Approved Two-piece Connectors May Be Used. Longitudinal Formed Joints Shall Consist Of A Groove Or Cleft, Extending Downward From And Normal To, The Surface Of The Pavement. These Joints Shall Be Effected Or Formed By An Approved Mechanically Or Manually Operated Device To The Dimensions And Line Indicated On The Plans And While The Concrete Is In A Plastic State. The Groove Or Cleft Shall Be Filled With Either A Premolded Strip Or Poured Material As Required. The Longitudinal Joints Shall Be Continuous, There Shall Be No Gaps In Either Transverse Or Longitudinal Joints At The Intersection Of The Joints. Longitudinal Sawed Joints Shall Be Cut By Means Of Approved Concrete Saws To The Depth, Width And Line Shown On The Plans. Suitable Guide Lines Or Devices Shall Be Used To Assure Cutting The Longitudinal Joint On The True Line. The Longitudinal Joint Shall Be Sawed Before The End Of The Curing Period Or Shortly Thereafter And Before Any Equipment Or Vehicles Are Allowed On The Pavement. The Sawed Area Shall Be Thoroughly Cleaned And, If Required, The Joint Shall Immediately Be Filled With Sealer. Longitudinal Pavement Insert Type Joints Shall Be Formed By Placing A Continuous Strip Of Plastic Materials Which Will Not React Adversely With The Chemical Constituent Of The Concrete. 2. Transverse Expansion Joint The Expansion Joint Filler Shall Be Continuous From Form To Form, Shaped To Sub-grade And To The Keyway Along The Form. Preformed Joint Filler Shall Be Furnished In Lengths Equal To The Pavement Width Or Equal To The Width Of One Lane. Damaged Or Repaired Joint Filler Shall Not Be Used. The Expansion Joint Filler Shall Be Held In A Vertical Position. An Approved Installing Bar, Or Other Device, Shall Be Used If Required To Secure Preformed Expansion Joint Filler At The Proper Grade And Alignment During Placing And Finishing Of The Concrete. Finished Joint Shall Not Deviate More Than 6 Mm From A Straight Line. If Joint Fillers Are Assembled In Sections, There Shall Be No Offsets Between Adjacent Units. No Plugs Of Concrete Shall Be Permitted Anywhere Within The Expansion Space. 3. Transverse Contraction Joint/weakened Joint When Shown On The Plans, It Shall Consist Of Planes Of Weakness Created By Forming Or Cutting Grooves In The Surface Of The Pavement And Shall Include Load Transfer Assemblies. The Depth Of The Weakened Plane Joint Should At All Times Not Be Less Than 50 Mm, While The Width Should Not Be More Than 6 Mm. A. Transverse Strip Contraction Joint. It Shall Be Formed By Installing A Parting Strip To Be Left In Place As Shown On The Plans. B. Formed Groove. It Shall Be Made By Depressing An Approved Tool Or Device Into The Plastic Concrete. The Tool Or Device Shall Remain In Place At Least Until The Concrete Has Attained Its Initial Set And Shall Then Be Removed Without Disturbing The Adjacent Concrete, Unless The Device Is Designed To Remain In The Joint. C. Sawed Contraction Joint. It Shall Be Created By Sawing Grooves In The Surface Of The Pavement Of The Width Not More Than 6 Mm, Depth Should At All Times Not Be Less Than 50 Mm, And At The Spacing And Lines Shown On The Plans, With An Approved Concrete Saw. After Each Joint Is Sawed, It Shall Be Thoroughly Cleaned Including The Adjacent Concrete Surface. Sawing Of The Joint Shall Commence As Soon As The Concrete Has Hardened Sufficiently To Permit Sawing Without Excessive Raveling, Usually 4 To 24 Hours. All Joints Shall Be Sawed Before Uncontrolled Shrinkage Cracking Takes Place. If Necessary, The Sawing Operations Shall Be Carried On During The Day Or Night, Regardless Of Weather Conditions. The Sawing Of Any Joint Shall Be Omitted If Crack Occurs At Or Near The Joint Location Prior To The Time Of Sawing. Sawing Shall Be Discounted When A Crack Develops Ahead Of The Saw. In General, All Joints Should Be Sawed In Sequence. If Extreme Condition Exist Which Make It Impractical To Prevent Erratic Cracking By Early Sawing, The Contraction Joint Groove Shall Be Formed Prior To Initial Set Of Concrete As Provided Above. 4. Transverse Construction Joint It Shall Be Constructed When There Is An Interruption Of More Than 30 Minutes In The Concreting Operations. No Transverse Joint Shall Be Constructed Within 1.50 M Of An Expansion Joint, Contraction Joint, Or Plane Of Weakness. If Sufficient Concrete Has Been Mixed At The Time Of Interruption To Form A Slab Of At Least 1.5 M Long, The Excess Concrete From The Last Preceding Joint Shall Be Removed And Disposed Off As Directed. 5. Load Transfer Device Dowel, When Used, Shall Be Held In Position Parallel To The Surface And Center Line Of The Slab By A Metal Device That Is Left In The Pavement. The Portion Of Each Dowel Painted With One Coat Of Lead Or Tar, In Conformance With The Requirements Of Item 404, Reinforcing Steel, Shall Be Thoroughly Coated With Approved Bituminous Materials, E.g., Mc-70, Or An Approved Lubricant, To Prevent The Concrete From Binding To That Portion Of The Dowel. The Sleeves For Dowels Shall Be Metal Designed To Cover 50 Mm Plus Or Minus 5 Mm (1/4 Inch), Of The Dowel, With A Watertight Closed End And With A Suitable Stop To Hold The End Of The Sleeves At Least 25 Mm (1 Inch) From The End Of The Dowel. In Lieu Of Using Dowel Assemblies At Contraction Joints, Dowel May Be Placed In The Full Thickness Of Pavement By A Mechanical Device Approved By The Lgu Project Engineer. 311.3.13 Final Strike-off (consolidation And Finishing) 1. Sequence The Sequence Of Operations Shall Be The Strike-off And Consolidation, Floating And Removal Of Laitance, Straight-edging And Final Surface Finish. Work Bridges Or Other Devices Necessary To Provide Access To The Pavement Surface For The Purpose Of Finishing Straight-edging, And Make Corrections As Hereinafter Specified, Shall Be Provided By The Contractor. In General, The Addition Of Water To The Surface Of The Concrete To Assist In Finishing Operations Will Not Be Permitted. If The Application Of Water To The Surface Is Permitted, It Shall Be Applied As Fog Spray By Means Of An Approve Spray Equipment. 2. Finishing Joints The Concrete Adjacent To Joints Shall Be Compacted Or Firmly Placed Without Voids Or Segregation Against The Joint Material Assembly, Also Under And Around All Load Transfer Devices, Joint Assembly Units, And Other Features Designed To Extend Into The Pavement. Concrete Adjacent To Joints Shall Be Mechanically Vibrated As Required In Subsection 311.3.9, Placing Concrete. After The Concrete Has Been Placed And Vibrated Adjacent To The Joints As Required In Subsection 311.3.9, The Finishing Machine Shall Be Brought Forward, Operating In A Manner To Avoid Damage Or Misalignment Of Joints. If Uninterrupted Operation Of The Finishing Machine, To Over And Beyond The Joints Causes Segregation Of Concrete, Damage To, Or Misalignment Of The Joints, The Finishing Machine Shall Be Stopped When The Front Screed Is Approximately 20 Cm (8 Inches) From The Joint. Segregated Concrete Shall Be Removed From In Front Of And Off The Joint. The Front Screed Shall Be Lifted And Set Directly On Top Of The Joint And The Forward Motion Of The Finishing Machine Resumed. When The Second Screed Is Close Enough To Permit The Excess Mortar In Front Of It To Flow Over The Joint, It Shall Be Lifted And Carried Over The Joint. Thereafter, The Finishing Machine May Be Run Over The Joint Without Lifting The Screeds, Provided There Is No Segregated Concrete Immediately Between The Joint And The Screed Or On Top Of The Joint. 3. Machine Finishing A. Non-vibratory Method. The Concrete Shall Be Distributed Or Spread As Soon As Placed. As Soon As The Concrete Has Been Placed, It Shall Be Struck Off And Screwed By An Approved Finishing Machine. The Machine Shall Go Over Each Area Of Pavement As Many Times And At Such Intervals As Necessary To Give The Proper Compaction And Leave A Surface Of Uniform Texture. Excessive Operation Over A Given Area Shall Be Avoided. The Tops Of The Forms Shall Be Kept Clean By An Effective Device Attached To The Machine And The Travel Of The Machine On The Forms Shall Be Maintained True Without Wobbling Or Other Variation Tending To Affect The Precision Finish. During The First Pass Of The Finishing Machine, A Uniform Ridge Of Concrete Shall Be Maintained Ahead Of The Front Screed In Its Entire Length. B. Vibratory Method. When Vibration Is Specified, Vibrators For Full Width Vibration Of Concrete Paving Slabs, Shall Meet The Requirements In Subsection 311.3.2, Equipment. If Uniform And Satisfactory Density Of The Concrete Is Not Obtained By The Vibratory Method At Joints, Along Forms, At Structures, And Throughout The Pavement, The Contractor Will Be Required To Furnish Equipment And Method Which Will Produce Pavement Conforming To The Specifications. All Provisions In Item (a) Above Not In Conflict With The Provisions For The Vibratory Method Shall Govern. 4. Hand Finishing Hand Finishing Methods May Only Be Used Under The Following Conditions: A. In The Event Of Breakdown Of The Mechanical Equipment, Hand Methods May Be Used To Finish The Concrete Already Deposited On The Grade. B. In Narrow Widths Or Areas Of Irregular Dimensions Where Operations Of The Mechanical Equipment Is Impractical, Hand Methods May Be Used. Concrete, As Soon As Placed, Shall Be Struck Off And Screeded. An Approved Portable Screed Shall Be Used. A Second Screed Shall Be Provided For Striking Off The Bottom Layer Of Concrete If Reinforcement Is Used. The Screed For The Surface Shall Be At Least 60 Cm (2 Feet) Longer Than The Maximum Width Of The Slab To Be Struck Off. It Shall Be Of Approved Design, Sufficiently Rigid To Retain Its Shape, And Constructed Either Of Metal Or Other Suitable Material Shod With Metal. Consolidation Shall Be Attained By The Use Of Suitable Vibrator Or Other Approved Equipment. In Operation, The Screed Shall Be Moved Forward On The Forms With A Combined Longitudinal And Transverse Shearing Motion, Moving Always In The Direction In Which The Work Is Progressing And So Manipulated That Neither End Is Raised From The Side Forms During The Striking Off Process. If Necessary, This Shall Be Repeated Until The Surface Is Of Uniform Texture, True To Grade And Cross-section, And Free From Porous Areas. 5. Floating After The Concrete Has Been Struck Off And Consolidated, It Shall Be Further Smoothed, Trued, And Consolidated By Means Of A Longitudinal Float, Either By Hand Or Mechanical Method. A. Hand Method. The Hand-operated Longitudinal Float Shall Be Not Less Than 365 Cm (12 Feet) In Length And 15 Cm (6 Inches) In Width, Properly Stiffened To Prevent Flexibility And Warping. The Longitudinal Float, Operated From Foot Bridges Resting On The Side Forms And Spanning But Not Touching The Concrete, Shall Be Worked With A Sawing Motion While Held In A Floating Position Parallel To The Road Center Line, And Moving Gradually From One Side Of The Pavement To The Other. Movement Ahead Along The Center Line Of The Pavement Shall Be In Successive Advances Of Not More Than One-half The Length Of The Float. Any Excess Water Or Soupy Material Shall Be Wasted Over The Side Forms On Each Pass. B. Mechanical Method. The Mechanical Longitudinal Float Shall Be Of A Design Approved By The Lgu Project Engineer, And Shall Be In Good Working Condition. The Tracks From Which The Float Operates Shall Be Accurately Adjusted To The Required Crown. The Float Shall Be Accurately Adjusted And Coordinated With The Adjustment Of The Transverse Finishing Machine So That A Small Amount Of Mortar Is Carried Ahead Of The Float At All Times. The Forward Screed Shall Be Adjusted So That The Float Will Lap The Distance Specified By The Lgu Project Engineer On Each Transverse Trip. The Float Shall Pass Over Each Areas Of Pavement At Least Two Times, But Excessive Operation Over A Given Area Will Not Be Permitted. Any Excess Water Or Soupy Material Shall Be Wasted Over The Side Forms On Each Pass. C. Alternative Mechanical Method. As An Alternative, The Contractor May Use A Machine Composed Of A Cutting And Smoothing Float Or Floats Suspended From And Guided By A Rigid Frame. The Frame Shall Be Carried By Four Or More Visible Wheels Riding On, And Constantly In Contact With The Side Forms. If Necessary, Following One Of The Preceding Method Of Floating, Long Handled Floats Having Blades Not Less Than 150 Cm (5 Feet) In Length And 15 Cm (6 Inches) In Width May Be Used To Smooth And Fill In Open-textured Areas In The Pavement. Long-handled Floats Shall Not Be Used To Float The Entire Surface Of The Pavement In Lieu Of, Or Supplementing, One Of The Preceding Methods Of Floating. When Strike Off And Consolidation Are Done By The Hand Method And The Crown Of The Pavement Will Not Permit The Use Of The Longitudinal Float, The Surface Shall Be Floated Transversely By Means Of The Long-handled Float. Care Shall Be Taken Not To Work The Crown Out Of The Pavement During The Operation. After Floating, Any Excess Water And Laitance Shall Be Removed From The Surface Of The Pavement By A 3-m Straight-edge Or More In Length. Successive Drags Shall Be Lapped One-half The Length Of The Blade. 6. Straight-edge Testing And Surface Correction After The Floating Has Been Completed And The Excess Water Removed, But While The Concrete Is Still Plastic, The Surface Of The Concrete Shall Be Tested For Trueness With A 300 Cm Long Straight-edge. For This Purpose, The Contractor Shall Furnish And Use An Accurate 300-cm Straight-edge Swung From Handles 100 Cm (3 Feet) Longer Than One-half The Width Of The Slab. The Straight-edge Shall Be Held In Contact With The Surface In Successive Positions Parallel To The Road Center Line And The Whole Area Gone Over From One Side Of The Slab To The Other As Necessary. Advances Along The Road Shall Be In Successive Stages Of Not More Than One-half The Length Of The Straight-edge. Any Depressions Found Shall Be Immediately Filled With Freshly Mixed Concrete, Struck Off, Consolidated And Refinished. High Areas Shall Be Cut Down And Refinished. Special Attention Shall Be Given To Assure That The Surface Across Joints Meets The Requirements For Smoothness. Straight-edge Testing And Surface Corrections Shall Continue Until The Entire Surface Is Found To Be Free From Observable Departures From The Straight-edge And The Slab Conforms To The Required Grade And Cross-section. 7. Final Finish If The Surface Texture Is Broom Finished, It Shall Applied When The Water Sheen Has Practically Disappeared. The Broom Shall Be Drawn From The Center To The Edge Of The Pavement With Adjacent Strokes Slightly Overlapping. The Brooming Operation Should Be So Executed That The Corrugations Produced In The Surface Shall Be Uniform In Appearance And Not More Than 1.5 Mm In Depth. Brooming Shall Be Completed Before The Concrete Is In Such Condition That The Surface Will Be Unduly Roughened By The Operation. The Surface Thus Finished Shall Be Free From Rough And Porous Areas, Irregularities, And Depressions Resulting From Improper Handling Of The Broom. Brooms Shall Be Of The Quality Size And Construction And Be Operated So As To Produce A Surface Finish Meeting The Approval Of The Lgu Project Engineer. Subject To Satisfactory Results Being Obtained And Approval Of The Lgu Project Engineer, The Contractor Will Be Permitted To Substitute Mechanical Brooming In Lieu Of The Manual Brooming Herein Described. If The Surface Texture Is Belt Finished, When Straight-edging Is Complete And Water Sheen Has Practically Disappeared And Just Before The Concrete Becomes Non-plastic, The Surface Shall Be Belted With 2-ply Canvass Belt Not Less Than 20 Cm Wide And At Least 100 Cm Longer Than The Pavement Width. Hand Belts Shall Have Suitable Handles To Permit Controlled, Uniform Manipulation. The Belt Shall Be Operated With Short Strokes Transverse To The Center Line And With A Rapid Advances Parallel To The Center Line. If The Surface Texture Is Drag Finished, A Drag Shall Be Used Which Consists Of A Seamless Strip Of Damp Burlap Or Cotton Fabric, Which Shall Produce A Uniform Of Gritty Texture After Dragging It Longitudinally Along The Full Width Of Pavement. For Pavement 5 M Or More In Width, The Drag Shall Be Mounted On A Bridge Which Travels On The Forms. The Dimensions Of The Drag Shall Be Such That A Strip Of Burlap Or Fabric At Least 100 Cm Wide Is In Contact With The Full Width Of Pavement Surface While The Drag Is Used. The Drag Shall Consist Of Not Less Than 2 Layers Of Burlap With The Bottom Layer Approximately 15 Cm Wider Than The Layer. The Drag Shall Be Maintained In Such Condition That The Resultant Surface Is Of Uniform Appearance And Reasonably Free From Grooves Over 1.5 Mm In Depth. Drag Shall Be Maintained Clean And Free From Encrusted Mortar. Drags That Cannot Be Cleaned Shall Be Discarded And New Drags Be Substituted. Regardless Of The Method Used For Final Finish, The Hardened Surface Of Pavement Shall Have A Coefficient Of Friction Of 0.25 Or More. Completed Pavement That Is Found To Have A Coefficient Of Friction Less Than 0.25 Shall Be Grounded Or Scored By The Contractor At His Expense To Provide The Required Coefficient Of Friction. 8. Edging At Forms And Joints After The Final Finish, But Before The Concrete Has Taken Its Initial Set, The Edges Of The Pavement Along Each Side Of Each Slab, And On Each Side Of Transverse Expansion Joints, Formed Joints, Transverse Construction Joints, And Emergency Construction Joints, Shall Be Worked With An Approved Tool And Rounded To The Radius Required By The Plans. A Well – Defined And Continuous Radius Shall Be Produced And A Smooth, Dense Mortar Finish Obtained. The Surface Of The Slab Shall Not Be Unduly Disturbed By Tilting The Tool During The Use. At All Joints, Any Tool Marks Appearing On The Slab Adjacent To The Joints Shall Be Eliminated By Brooming The Surface. In Doing This, The Rounding Of The Corner Of The Slab Shall Not Be Disturbed. All Concrete On Top Of The Joint Filler Shall Be Completely Removed. All Joints Shall Be Tested With A Straight-edge Before The Concrete Has Set And Correction Made If One Edge Of The Joint Is Higher Than The Other. 311.3.14 Surface Test As Soon As The Concrete Has Hardened Sufficiently, The Pavement Surface Shall Be Tested With A 3-m Straight-edge Or Other Specified Device. Areas Showing High Spots Of More Than 3 Mm But Not Exceeding 12 Mm In 3 M Shall Be Marked And Immediately Ground Down With An Approved Grinding Tool To An Elevation Where The Area Or Spot Will Not Show Surface Deviations In Excess Of 3 Mm When Tested With 3 M Straight-edge. Where The Departure From Correct Cross-section Exceeds 12 Mm, The Pavement Shall Be Removed And Replaced By And At The Expense Of The Contractor. Any Area Or Section So Removed Shall Be Not Less Than 1.5 M In Length And Not Less Than The Full Width Of The Lane Involved. When It Is Necessary To Remove And Replace A Section Of Pavement, Any Remaining Portion Of The Slab Adjacent To The Joints That Is Less Than 1.5 M In Length, Shall Also Be Removed And Replaced. 311.3.15 Curing Immediately After The Finishing Operations Have Been Completed And The Concrete Has Sufficiently Set, The Entire Surface Of The Newly Placed Concrete Shall Be Cured In Accordance With Either One Of The Methods Described Herein. Failure To Provide Sufficient Cover Material Of Whatever Kind The Contractor May Elect To Use, Or The Lack Of Water To Adequately Take Care Of Both Curing And Other Requirements, Shall Be A Cause For Immediate Suspension Of Concreting Operations. The Concrete Shall Not Be Left Exposed For More Than ½ Hour Between Stages Of Curing Or During The Curing Period. In All Congested Places, Concrete Works Should Be Designed So That The Designed Strength Is Attained. 1. Cotton Of Burlap Mats The Surface Of The Pavement Shall Be Entirely Covered With Mats. The Mats Used Shall Be Of Such Length (or Width) That As Laid They Will Extend At Least Twice The Thickness Of The Pavement Beyond The Edges Of The Slab. The Mat Shall Be Placed So That The Entire Surface And The Edges Of The Slab Are Completely Covered. Prior To Being Placed, The Mats Shall Be Saturated Thoroughly With Water. The Mat Shall Be So Placed And Weighted Down So As To Cause Them To Remain In Intimate Contact With The Covered Surface. The Mat Shall Be Maintained Fully Wetted And In Position For 72 Hours After The Concrete Has Been Placed Unless Otherwise Specified. 2. Waterproof Paper The Top Surface And Sides Of The Pavement Shall Be Entirely Covered With Waterproof Paper, The Units Shall Be Lapped At Least 45 Cm. The Paper Shall Be So Placed And Weighted Down So As To Cause It To Remain In Intimate Contact With The Surface Covered. The Paper Shall Have Such Dimension But Each Unit As Laid Will Extend Beyond The Edges Of The Slab At Least Twice The Thickness Of The Pavement, Or At Pavement Width And 60 Cm Strips Of Paper For The Edges. If Laid Longitudinally, Paper Not Manufactured In Sizes Which Will Provide This Width Shall Be Securely Sewed Or Cemented Together, The Joints Being Securely Sealed In Such A Manner That They Do Not Open Up Or Separate During The Curing Period. Unless Otherwise Specified, The Covering Shall Be Maintained In Place For 72 Hours After The Concrete Has Been Placed. The Surface Of The Pavement Shall Be Thoroughly Wetted Prior To The Placing Of The Paper. 3. Straw Curing When This Type Of Curing Is Used, The Pavement Shall Be Cured Initially With Burlap Or Cotton Mats, Until After Final Set Of The Concrete Or, In Any Case, For 12 Hours After Placing The Concrete. As Soon As The Mats Are Removed, The Surface And Sides Of The Pavement Shall Be Thoroughly Wetted And Covered With At Least 20 Cm Of Straw Or Hay, Thickness Of Which Is To Be Measured After Wetting. If The Straw Or Hay Covering Becomes Displaced During The Curing Period, It Shall Be Replaced To The Original Depth And Saturated. It Shall Be Kept Thoroughly Saturated With Water For 72 Hours And Thoroughly Wetted Down During The Morning Of The Fourth Day, And The Cover Shall Remain In Place Until The Concrete Has Attained The Required Strength. 4. Impervious Membrane Method The Entire Surface Of The Pavement Shall Be Sprayed Uniformly With White Pigmented Curing Compound Immediately After The Finishing Of The Surface And Before The Set Of The Concrete Has Taken Place, Or If The Pavement Is Cured Initially With Jute Or Cotton Mats, It May Be Applied Upon Removal Of The Mass. The Curing Compound Shall Not Be Applied During Rain. Curing Compound Shall Be Applied Under Pressure At The Rate 4 L To Not More Than 14 M2 By Mechanical Sprayers. The Spraying Equipment Shall Be Equipped With A Wind Guard. At The Time Of Use, The Compound Shall Be In A Thoroughly Mixed Condition With The Pigment Uniformly Dispersed Throughout The Vehicle. During Application, The Compound Shall Be Stirred Continuously By Effective Mechanical Means. Hand Spraying Of Odd Widths Or Shapes And Concrete Surface Exposed By The Removal Of Forms Will Be Permitted. Curing Compound Shall Not Be Applied To The Inside Faces Of Joints To Be Sealed, But Approved Means Shall Be Used To Insure Proper Curing At Least 72 Hours And To Prevent The Intrusion Of Foreign Material Into The Joint Before Sealing Has Been Completed. The Curing Compound Shall Be Of Such Character That The Film Will Harden Within 30 Minutes After Application. Should The Film Be Damaged From Any Cause Within The 72 Hour Curing Period, The Damaged Portions Shall Be Repaired Immediately With Additional Compound. 5. White Polyethylene Sheet The Top Surface And Sides Of The Pavement Shall Be Entirely Covered With Polyethylene Sheeting. The Units Used Shall Be Lapped At Least 45 Cm. The Sheeting Shall Be So Placed And Weighted Down So As To Cause It To Remain Intimate Contact With The Surface Covered. The Sheeting As Prepared For Use Shall Have Such Dimension That Each Unit As Laid Will Extend Beyond The Edges Of The Slab At Least Twice The Thickness Of The Pavement. Unless Otherwise Specified, The Covering Shall Be Maintained In Place For 72 Hours After The Concrete Has Been Placed. 311.3.16 Removal Of Forms After Forms For Concrete Shall Remain In Place Undisturbed For Not Less Than Twenty Four (24) Hours After Concrete Pouring. In The Removal Of Forms, Crowbars Should Be Used In Pulling Out Nails And Pins. Care Should Be Taken So As Not To Break The Edges Of The Pavement. In Case Portions Of The Concrete Are Spalled, They Shall Be Immediately Repaired With Fresh Mortar Mixed In The Proportion Of One Part Of Portland Cement And Two Parts Fine Aggregates. Major Honeycomb Areas Will Be Considered As Defective Work And Shall Be Removed And Replaced At The Expense Of The Contractor. Any Area Or Section So Removed Shall Not Be Less Than The Distance Between Weakened Plane Joint Nor Less Than The Full Width Of The Lane Involved. 311.3.17 Sealing Joints Joints Shall Be Sealed With Asphalt Sealant Soon After Completion Of The Curing Period And Before The Pavement Is Opened To Traffic, Including The Contractor’s Equipment. Just Prior To Sealing, Each Joint Shall Be Thoroughly Cleaned Of All Foreign Materials Including Membrane Curing Compound And The Joint Faces Shall Be Clean And Surface Dry When The Seal Is Applied. The Sealing Material Shall Be Applied To Each Joint Opening To Conform To The Details Shown On The Plans Or As Directed By The Lgu Project Engineer. Material For Seal Applied Hot Shall Be Stirred During Heating So That Localized Overheating Does Not Occur. The Pouring Shall Be Done In Such A Manner That The Material Will Not Be Spilled On The Exposed Surfaces Of The Concrete. The Use Of Sand Or Similar Material As A Cover For The Seal Will Not Be Permitted. Preformed Elastomeric Gaskets For Sealing Joints Shall Be Of The Cross-sectional Dimensions Shown On The Plans. Seals Shall Be Installed By Suitable Tools, Without Elongation And Secured In Placed With An Approved Lubricant Adhesive Which Shall Cover Both Sides Of The Concrete Joints. The Seals Shall Be Installed In A Compressive Condition And Shall At Time Of Placement Be Below The Level Of The Pavement Surface By Approximately 6 Mm. The Seals Shall Be In One Piece For The Full Width Of Each Transverse Joint. 311.3.18 Protection Of Pavement The Contractor Shall Protect The Pavement And Its Appurtenances Against Both Public Traffic And Traffic Caused By His Own Employees And Agents. This Shall Include Watchmen To Direct Traffic And The Erection Of And Maintenance Of Warning Signs, Lights, Pavement Bridges Or Cross-overs, Etc. The Plans Or Special Provisions Will Indicate The Location And Type Of Device Or Facility Required To Protect The Work And Provide Adequately For Traffic. All Boreholes After Thickness And/or Strength Determinations Of Newly Constructed Asphalt And Concrete Pavements Shall Be Immediately Filled/restored With The Prescribed Concrete/asphalt Mix After Completion Of The Drilling Works. Any Damage To The Pavement, Occurring Prior To Final Acceptance, Shall Be Repaired Or The Pavement Be Replaced. 311.3.19 Concrete Pavement – Slip Form Method If The Contract Calls For The Construction Of Pavement Without The Use Of Fixed Forms, The Following Provisions Shall Apply: 1. Grade After The Grade Or Base Has Been Placed And Compacted To The Required Density, The Areas Which Will Support The Paving Machine Shall Be Cut To The Proper Elevation By Means Of A Properly Designed Machine. The Grade On Which The Pavement Is To Be Constructed Shall Then Be Brought To The Proper Profile By Means Of Properly Designed Machine. If The Density Of The Base Is Disturbed By The Grading Operation, It Shall Be Corrected By Additional Compaction Before Concrete Is Placed. The Grade Should Be Constructed Sufficiently In Advance Of The Placing Of The Concrete. If Any Traffic Is Allowed To Use The Prepared Grade, The Grade Shall Be Checked And Corrected Immediately Before The Placing Of Concrete. 2. Placing Concrete The Concrete Shall Be Placed With An Approved Slip-form Paver Designed To Spread, Consolidate, Screed And Float-finish The Freshly Placed Concrete In One Complete Pass Of The Machine In Such A Manner That A Minimum Of Hand Finish Will Be Necessary To Provide A Dense And Homogenous Pavement In Conformance With The Plans And Specifications. The Machine Shall Vibrate The Concrete For The Full Width And Depth Of The Strip Of Pavement Being Placed. Such Vibration Shall Be Accompanied With Vibrating Tubes Or Arms Working In The Concrete Or With A Vibrating Screed Or Pan Operating On The Surface Of The Concrete. The Sliding Forms Shall Be Rigidly Held Together Laterally To Prevent Spreading Of The Forms. The Forms Shall Trail Behind The Paver For Such A Distance That No Appreciable Slumping Of The Concrete Will Occur, And That Necessary Final Finishing Can Be Accomplished While The Concrete Is Still Within The Forms. Any Edge Slump Of The Pavement, Exclusive Of Edge Rounding, In Excess Of 6 Mm Shall Be Corrected Before The Concrete Has Hardened. The Concrete Shall Be Held At A Uniform Consistency, Having A Slump Of Not More Than 40 Mm (1-12/ Inches). The Slip Form Paver Shall Be Operated With As Nearly As Possible A Continuous Forward Movement And That All Operations Of Mixing, Delivering And Spreading Concrete Shall Be Coordinated So As To Provide Uniform Progress With Stopping And Starting Of The Paver Held To A Minimum. If, For Any Reason, It Is Necessary To Stop The Forward Movement Of The Paver The Vibratory And Tamping Elements Shall Also Be Stopped Immediately. No Tractive Force Shall Be Applied To The Machine, Except That Which Is Controlled From The Machine. 3. Finishing The Surface Smoothness And Texture Shall Meet The Requirements Of Subsections 311.3.13 And 311.3.14. 4. Curing Unless Otherwise Specified, Curing Shall Be Done In Accordance With One Of The Methods Included In Subsection 311.3.15. The Curing Media Shall Be Applied At The Appropriate Time And Shall Be Applied Uniformly And Completely To All Surfaces And Edges Of The Pavement. 5. Joints All Joints Shall Be Constructed In Accordance With Subsection 311.3.12. 6. Protection Against Rain In Order That The Concrete May Be Properly Protected Against Rain Before The Concrete Is Sufficiently Hardened, The Contractor Will Be Required To Have Available At All Times, Materials For The Protection Of The Edges And Surface Of The Unhardened Concrete. Such Protective Materials Shall Consist Of Standard Metal Forms Or Wood Planks Having A Nominal Thickness Of Not Less Than 50 Mm (2 Inches) And A Nominal Width Of Not Less Than The Thickness Of The Pavement At Its Edge For The Protection Of The Pavement Edges, And Covering Material Such As Burlap Or Cotton Mats, Curing Paper Or Plastic Sheeting Materials For The Protection Of The Surface Of The Pavement. When Rain Appears Imminent, All Paving Operations Shall Stop And All Available Personnel Shall Begin Placing Forms Against The Sides Of The Pavement And Covering The Surface Of The Unhardened Concrete With The Protective Covering. 311.3.22 Acceptance Of Concrete The Strength Level Of The Concrete Will Be Considered Satisfactory If The Averages Of All Sets Of Three (3) Consecutive Strength Test Results Equal Or Exceed The Specified Strength, Fc’ And No Individual Strength Test Result Is Deficient By More Than 15% Of The Specified Strength, Fc’. Concrete Deemed To Be Not Acceptable Using The Above Criteria May Be Rejected Unless The Contractor Can Provide Evidence, By Means Of Core Tests, That The Quality Of Concrete Represented By Failed Test Results Is Acceptable In Place. At Least Three (3) Representative Cores Shall Be Taken From Each Member Or Area Of Concrete In Place That Is Considered Deficient. The Location Of Cores Shall Be Determined By The Engineer So That There Will Be At Least Impairment Of Strength Of The Structure. The Obtaining And Testing Of Drilled Cores Shall Be In Accordance With Aashto T 24. Concrete In The Area Represented By The Cores Will Be Considered Adequate If The Average Strength Of The Cores Is Equal To At Least 85% Of, And If No Single Core Is Less Than 75% Of, The Specified Strength, Fc’. If The Strength Of Control Specimens Does Not Meet The Requirements Of This Subsection, And It Is Not Feasible Or Not Advisable To Obtain Cores From The Structure Due To Structural Considerations, Payment Of The Concrete Will Be Made At An Adjusted Price Due To Strength Deficiency Of Concrete Specimens As Specified Hereunder: Deficiency In Strength Of Concrete Specimens, Percent (%) Percent (%) Of Contract Price Allowed Less Than 5 100 5 To Less Than 10 80 10 To Less Than 15 70 15 To Less Than 20 60 20 To Less Than 25 50 25 Or More 0 311.3.23 Opening To Traffic The Engineer Will Decide When The Pavement May Be Opened To Traffic. The Road Will Not Be Opened To Traffic Until Test Specimens Molded And Cured In Accordance With Aashto T 23 Have Attained The Minimum Strength Requirements In Subsection 311.2.11. If Such Tests Are Not Conducted Prior To The Specified Age The Pavement Shall Not Be Operated To Traffic Until 14 Days After The Concrete Was Placed. Before Opening To Traffic, The Pavement Shall Be Cleaned And Joint Sealing Completed. 311.3.24 Tolerance And Pavement Thickness 1. General The Thickness Of The Pavement Will Be Determined By Measurement Of Cores From The Completed Pavement In Accordance With Aashto T 148. The Completed Pavement Shall Be Accepted On A Lot Basis. A Lot Shall Be Considered As 1000 Linear Meters Of Pavement When A Single Traffic Lane Is Poured Or 500 Linear Meters When Two Lanes Are Poured Concurrently. The Last Unit In Each Slab Constitutes A Lot In Itself When Its Length Is At Least ½ Of The Normal Lot Length. If The Length Of The Last Unit Is Shorter Than ½ Of The Normal Lot Length, It Shall Be Included In The Previous Lot. Other Areas Such As Intersections, Entrances, Crossovers, Ramp, Etc., Will Be Grouped Together To Form A Lot. Small Irregular Areas May Be Included With Other Unit Areas To Form A Lot. Each Lot Will Be Divided Into Five (5) Equal Segments And One Core Will Be Obtained From Each Segment In Accordance With Aashto T 24. 2. Pavement Thickness It Is The Intent Of This Specification That The Pavement Has A Uniform Thickness As Called For On The Plans For The Average Of Each Lot As Defined. After The Pavement Has Met All Surface Smoothness Requirements, Cores For Thickness Measurements Will Be Taken. In Calculating The Average Thickness Of The Pavement, Individual Measurements Which Are In Excess Of The Specified Thickness By More Than 5 Mm Will Be Considered As The Specified Thickness Plus 5 Mm And Measurement Which Are Less Than The Specified Thickness By More Than 25 Mm Shall Not Be Included In The Average. When The Average Thickness For The Lot Is Deficient, The Contract Unit Price Will Be Adjusted For Thickness In Accordance With Paragraph (3 Below). Individual Areas Within A Segment Found Deficient In Thickness By More Than 25 Mm Shall Be Evaluated By The Lgu Project Engineer, And If In His Judgment, The Deficient Areas Warrant Removal, They Shall Be Removed And Replaced By The Contractor With Pavement Of The Specified Thickness At His Entire Expense. However, If The Evaluation Of The Lgu Project Engineer Is That The Deficient Area Should Not Be Removed And Replaced, Such Area Will Not Be Paid. When The Measurement Of Any Core Is Less Than The Specified Thickness By More Than 25 Mm, The Actual Thickness Of The Pavement In This Area Will Be Determined By Taking Additional Cores At No Less Than 5 M Intervals Parallel To The Center Line In Each Direction From The Affected Location Until A Core Is Found In Each Direction, Which Is Not Deficient In Thickness By More Than 25 Mm. The Area Of Slab For Which No Payment Will Be Made Shall Be The Product Of The Paving Width Multiplied By The Distance Along The Center Line Of The Road Between Transverse Sections Found Not Deficient In Thickness By More Than 25 Mm. The Thickness Of The Remainder Of The Segment To Be Used To Get The Average Thickness Of Each Lot Shall Be Determined By Taking The Average Thickness Of Additional Cores Which Are Not Deficient By More Than 25 Mm. 3. Adjustment For Thickness When The Average Thickness Of The Pavement Per Lot Is Deficient, Payment For The Lot Shall Be Adjusted As Follows: Deficiency In The Average Thickness Per Lot (mm) Percent (%) Of Contract Price Per Lot 0 – 5 100% Payment 6 – 10 95% Payment 11 – 15 85% Payment 16 – 20 70% Payment 21 – 25 50% Payment More Than 25 Remove And Replace/ No Payment No Acceptance And Final Payment Shall Be Made On Completed Pavement Unless Core Test For Thickness Determination Is Conducted 311.4 Environmental Measures In Loading Cement To The Truck And Unloading It To The Temporary Bodega, And From The Bodega To Batching Plant And During Concrete Work Operation Workers Doing This Job Shall Be Provided With Gears So As To Avoid Inhaling Cement Dust Particles That Could Affect Their Health. Workers In Construction Site Shall Be Provided With Working Gloves, Mask Boots And Clothing To Prevent Workers From Being Contaminated With Concrete Mix. The Contractor Shall See To It That The Noise Level Of The Exhaust Mufflers Of The Equipment Shall Be At The Minimum. Otherwise, The Contractor Must Replace All The Exhaust Mufflers Of The Equipment With A New One And Or Provide Muffler Silencers. All Roads Leading The Construction Site And Batching Plant Shall Be Moist During The Entire Works Operation To Prevent The Blowing Up Of Dust Particles. During Work Operation, Precautionary Signboards Shall Be Provided By The Contractor To Prevent Accidents And Damage To The Freshly Laid Concrete.

Details: The subject of the contract is the replacement of the external entrance staircase to the 2nd floor of the building No. 2498 and the roofing of the existing terrace. The foundations of the staircase will be carried out as a flat foundation. The foundations will be formed by concrete monolithic strips 400 mm wide and 850 mm deep. The steel structures of the staircase will be chemically anchored to the foundation strips. The foundation strips will be excavated mechanically to a depth of 100 mm above the level of the foundation joint. The remaining 100 mm will be excavated manually to prevent loosening of the soil in the foundation joint. During excavation work, it is always necessary to strictly comply with the regulations on work safety. During implementation, the designer reserves the right to change the foundation of the building based on the discovery of new facts about the subsoil. Furthermore, the designer reserves the right to take over the foundation joint and compare it with the foundation method described in the project. The designer will be asked to do this at least 3 days before covering. Vertical structures On the ceiling structure of the existing terrace, vertical steel roofing columns made of Jäckel profile 100/100/5 mm will be installed to support the steel purlin. The columns will be chemically anchored to the existing structure via footings of P12 – 250 X 250 mm. Horizontal structures The roof structure of the terrace roofing will consist of a purlin made of Jäckel profile 100/100/5 mm, which will be welded to the vertical column and anchored to the existing reinforced concrete structure via an anchor element. Steel roof trusses made of Jäckel profile 60/60/3 mm will be installed over the purlins, and the trusses will be chemically anchored to the existing structure. The external entrance staircase of the staircase will be made of steel. The outer steps and landings will be made of steel beams UPN 220 and the central step and landing beams will be made of steel profile Ipe160. A P8 sheet will be welded onto the central step, the shape of which copies the contour of the staircase. The steps of the stairs will be screwed together over this sheet, and the steps will be attached to the outer steps from the side. The vertical supporting structure will be made of steel columns Jäckel 100/100/3 mm. The stairs will be connected to each other by horizontal beams made of Jäckel profile 100/100/3 mm. The Staircase Construction Will Be Anchored To The Reinforced Concrete Structures Of The Object With M16 Screws On Chemical Mortar. The Staircase Steps And Floors Of The Landing And Intermediate Landing Will Be Made Of Porous Gratings (Expanded Metal). The Shape Of The Staircase Is Determined By The Construction Part Of The Documentation. The Railing Will Be Made According To The Requirements Of The Czech Construction Code. Roof - New Penthouse Roof Of The Terrace - Slope Of 6°. Ceramic Roofing Trapezoidal Sheet. Insulation Against Water - In The Composition Of The New Terrace Floor - Waterproofing Using Pci Barraseal Turbo With Gluing Of The Eaves Profile And Inserting Of Insulating Strips Thermal Insulation - In The Composition Of The New Terrace Floor Pir Board Thickness 30 Mm A Detailed Description Is Given In The Attached Project Documentation Processed By Proefekt - Design Office Špindlerova 672, 413 01 Roudnice NL, Ič 64013111.