Waterproofing Tenders

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 24b00145 : Department Of Health - Fy 2024 Health Facilities Enhancement Program (hfep): Rural Health Units (rural Health Unit) - Completion/ Equipping Of Super Health Centers - Santa Teresita Super Health Center 1. The Dpwh Regional Office Ii, Through The Ra 11975 (gaa Fy 2024) Intends To Apply The Sum Of ₱5,970,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 24b00145: Department Of Health - Fy 2024 Health Facilities Enhancement Program (hfep): Rural Health Units (rural Health Unit) - Completion/ Equipping Of Super Health Centers - Santa Teresita Super Health Center. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Department Of Health - Fy 2024 Health Facilities Enhancement Program (hfep): Rural Health Units (rural Health Unit) - Completion/ Equipping Of Super Health Centers - Santa Teresita Super Health Center Contract Id No. : 24b00145 Location : Santa Teresita, Cagayan Brief Project Description : Completion/ Equipping Of Super Health Centers: Installation Of Leaded Materials At X-ray Room, Installation Of Additional 5 Sets Of Air-conditioning Unit, Installation Of Emergency Shower & Eyewash, Construction Of Built-in Cabinets (laboratory), Construction Of Sharps And Needles, Installation Of Roll-up Door At Main Entrance Door, Construction Of Ambulance Bay And Patient Waiting Area, Pavement Of Walkway, Installation Of Electrical Works And Installation Of Stainless Steel Tubular At Ambulance Bay And Patient Waiting Area, Construction Of Powerhouse, Installation Of Roll-up Doors At Powerhouse, Installation Of Generator Set And Stainless Steel Water Tank Scope Of Works : Other General Requirements • Permits And Clearances • Project Billboard / Signboard • Occupational Safety And Health Program • Mobilization / Demobilization Earthworks • Removal Of Structures And Obstruction • Structure Excavation (common Soil) • Embankment (from Structure Excavation) • Gravel Fill Plain And Reinforced Concrete Works • Structural Concrete, 3000 Psi, Class A, 28 Days • Reinforcing Steel (deformed) Grade (40 & 60) • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Catch Basin • Sewer Line Works • Sanitary/plumbing Fixtures • Cold Water Lines • Ceiling • Wall • Carpentry And Joinery • Finishing Hardware • Steel Doors And Frames • Roll-up Door (steel) • Waterproofing, Liquid • (glazed, Unglazed) Tiles • Cement (floor, Broom, Plaster) Finish • Non -slip Finish • Painting Works, (masonry/ Concrete, Steel) • Metal Deck Panel • Chb Non-load Bearing (including Reinforcing Steel) (150mm) • Louver Block • Metal Structure Accessories, (steel Plates) • Structural Steel (tubular Stainless Steel "ss304") Electrical Works • Conduits, Boxes & Fittings (conduit Works/conduit Rough-in) • Wires And Wiring Devices • Panelboard With Main & Branch Breakers • Generator Single Or Three Phase Stand-by • Solar Panel With Inverter, Battery And Other Devices • Lighting Fixtures • Reinforced Concrete Pedestal / Pole Mechanical Works • Ventilating System • Water Tank, Stainless Approved Budget For The Contract (abc) : ₱5,970,000.00 Contract Duration : 85 Calendar Days Inclusive Of 6 Unworkable/rainy Days, 18 Sundays And Holidays 2. The Major Category Of Work For The Project Is Bicwoplc - Buildings: Construction-without Piles-low Rise-concrete Frame(1 To 5 Storey ). 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Small B For Buildings. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 12, 2024 - January 08, 2025, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Ten Thousand Pesos Only (₱10,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On December 19, 2024, 10:00 Am At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before January 08, 2025 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On January 08, 2025, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: December 12-18, 2024 Conspicuous Place (procurement Bulletin Board): December 12-18, 2024

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 24b00144 : Department Of Health - Fy 2024 Health Facilities Enhancement Program (hfep): Rural Health Units (rural Health Unit) - Completion/ Equipping Of Super Health Centers - Saguday Super Health Center 1. The Dpwh Regional Office Ii, Through The Ra 11975 (gaa Fy 2024) Intends To Apply The Sum Of ₱5,970,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 24b00144: Department Of Health - Fy 2024 Health Facilities Enhancement Program (hfep): Rural Health Units (rural Health Unit) - Completion/ Equipping Of Super Health Centers - Saguday Super Health Center. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Department Of Health - Fy 2024 Health Facilities Enhancement Program (hfep): Rural Health Units (rural Health Unit) - Completion/ Equipping Of Super Health Centers - Saguday Super Health Center Contract Id No. : 24b00144 Location : Saguday, Quirino Brief Project Description : Construction Of Saguday Super Health Center: Structural Works (excavation, Embankment, Gravel Fill, Steelworks, Structural Concrete), Plumbing Works (construction Of Catch Basin, Septic Tank, Installation Of Sewer Line Works, Waterline Works, And Storm Drainage), Finishing Works (masonry, Plastering Interior Wall And Ceiling Painting Works, Ceiling Works, Waterproofing, Tile Works, Installation Of Doors And Windows) Scope Of Works : Other General Requirements • Permits And Clearances • Project Billboard / Signboard • Occupational Safety And Health Program • Mobilization / Demobilization Earthworks • Structure Excavation (common Soil) • Embankment (from Structure Excavation & Borrow) • Gravel Fill Plain And Reinforced Concrete Works • Structural Concrete, 3000 Psi, Class A, 28 Days • Reinforcing Steel (deformed) Grade (40 & 60) • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Catch Basin • Sewer Line Works • Storm Drainage And Downspout • Septic Tank (chb) • Sanitary/plumbing Fixtures • Cold Water Lines • Ceiling • Modular Partition • Finishing Hardware • Aluminum Glass Windows, (swing, Sliding, Awning & Fixed) Type • Doors, (wood Panel) • Fabricated Metal Roofing Accessory, 0.60 Mm, (ridge/hip Rolls, Flashing, Gutters) • Prepainted Metal Sheets (rib Type, Long Span,0.6mm Thk) • Unglazed Tiles • Granite Tiles • Cement (plaster) Finish • Painting Works, (masonry/ Concrete, Steel) • Pvc Doors And Frames • Chb Non-load Bearing (including Reinforcing Steel) (100 Mm & 150mm) • Metal Structure Accessories, (turnbuckle, Sagrods, Cross Bracing & Steel Plates) • Structural Steel Purlins Electrical Works • Conduits, Boxes & Fittings (conduit Works/conduit Rough-in) • Wires And Wiring Devices • Panelboard With Main & Branch Breakers • Lighting Fixtures • Reinforced Concrete Pedestal / Pole Approved Budget For The Contract (abc) : ₱5,970,000.00 Contract Duration : 85 Calendar Days Inclusive Of 6 Unworkable/rainy Days, 17 Sundays And Holidays 2. The Major Category Of Work For The Project Is Bicwoplc - Buildings: Construction-without Piles-low Rise-concrete Frame(1 To 5 Storey ). 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Small B For Buildings. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 12, 2024 - January 08, 2025, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Ten Thousand Pesos Only (₱10,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On December 19, 2024, 10:00 Am At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before January 08, 2025 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On January 08, 2025, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: December 12-18, 2024 Conspicuous Place (procurement Bulletin Board): December 12-18, 2024

Details: Description The Zamboanga Peninsula Polytechnic State University Through Its Bids And Awards Committee (bac) Is Inviting Philgeps Registered Suppliers To Apply For Eligibility And To Submit Bids For The Items Listed Below: 1 Portland Cement, 40kg (710 Bags) 2 Coarse Sand (32 Cu.m.) 3 Gravel, ¾” Size (41 Cu.m.) 4 Fine Sand (18 Cu.m.) 5 Cement Water-proofing Compound, 1kg/bag (40 Bags) 6 Chb, 4” (4,365 Pcs.) 7 Rsb, 10mmø (585 Pcs.) 8 Rsb, 12mmø (190 Pcs.) 9 Rsb, 16mmø (180 Pcs.) 10 Dry Brickstone, Sorsogon (10.8 Sq.m.) 11 Concrete Neutralizer (10 Gals.) 12 Liquid Tile Primer (20 Gals.) 13 Patching Compound, 20kg (25 Bags) 14 Liquid Tile Top Coat, White (40 Gals.) 15 Baby Roller, Cloth (8 Pcs.) 16 Paint Roller, 6”, Cloth (8 Pcs.) 17 Paint Brush, 3” (8 Pcs.) 18 Waterproofing Paint, Gray (4 Gals.) 19 Pvc Sanitary Pipe, S1000, 4” (12 Pcs.) 20 Pvc Sanitary Pipe, S1000, 3” (5 Pcs.) 21 Pvc 90° Sanitary Elbow, 3” (8 Pcs.) 22 Wall Faucet Plain Bib, ½” X 6”, Stainless (7 Pcs.) 23 Wall Faucet Plain Bib, ½” X 4”, Stainless (6 Pcs.) 24 Wall Faucet Plain Bib, ½” X 2”, Stainless (18 Pcs.) 25 Stainless Floor Drain Main, 6” X 6” (13 Pcs.) 26 Stainless Floor Drain Main, 6” X 4” (2 Pcs.) 27 Pvc P-trap, S1000, 4”, Assembled (10 Pcs.) 28 Body Filler W/ Hardener (12 L) 29 Tee Reducer, 4” X 2” (20 Pcs.) 30 Pvc Elbow, 45°, 2” (10 Pcs.) 31 Pvc Tee, 4”, Sanitary (40 Pcs.) 32 Pvc Elbow, 90°, 4” (15 Pcs.) 33 Pvc Wye W/ Clean-out, 4”, 4” X 4” (10 Pcs.) 34 Ppr Pipes, Red Line, ½” (13 Pcs.) 35 Ppr Tee, ½” (40 Pcs.) 36 Ppr Elbow, ½” (50 Pcs.) 37 Solvent Cement, 400cc (2 Pcs.) 38 Water Closet W/ Trap, Flush Tank & Cover, White Porcelain (8 Sets) 39 Wall-mounted Urinal, White Porcelain, W/ Push Button Faucet Valve (7 Sets) 40 Surface Lavatories, Round & White, For Counters (7 Sets) 41 Cylindrical Knobset (4 Sets) 42 Sliding Barrel Flat Bolt, Stainless, 3” (8 Sets) 43 2-prong Universal Outlets (4 Sets) 44 Electrical Flexible Hose, 1/2” (60 M) 45 Electrical Tape, 16m, Big Size (4 Pcs.) 46 Junction Square Box W/ Cover (6 Pcs.) 47 Panel Board, 8 Branches (1 Set) 48 Utility Box (7 Pcs.) 49 Orbit Fan (2 Units) 50 Circuit Breaker, 30a (1 Pc.) 51 Circuit Breaker, 15a (2 Pcs.) 52 Led Downlight, White, 9w, 145mm X 145mm, 3 Colors (21 Pcs.) 53 Thhn Wire #12 (2 Boxes) 54 Thhn Wires #10 (1 Box) 55 2-gang Switch (2 Sets) 56 1-gang Switch (2 Sets) 57 4-gang Switch (1 Set) 58 Gi Tubular, 2” X 4” (20 Pcs.) 59 Stainless Zppsu Seal, 1.5m Ø (1 Set) 60 Fiber Cement Board, 3.5mm (40 Pcs.) 61 Double Metal Furring (145 Pcs.) 62 Cut-off Wheel Blade, 14” (4 Pcs.) 63 Angle Grinder Cutting Disc (20 Pcs.) 64 Mirror W/ Brown Aluminum Framing, 80cm H X 60cm W (1 Pc.) 65 Mirror W/ Brown Aluminum Framing, 80cm H X 200cm W (2 Pcs.) 66 Wall Angle, 0.4mm (35 Pcs.) 67 Filling Materials, No Boulders & Big Rocks (120 Cu.m.) 68 Door Bumper (4 Pcs.) 69 Stainless Toilet Signages, Male & Female (1 Pc.) 70 Stainless Toilet Signages, Male (1 Pc.) 71 Stainless Toilet Signages, Female (1 Pc.) 72 Stainless Toilet Signages, Pwd (1 Pc.) 73 Stainless Door Hinges, 3” X 3” X 2mm, Set Of 2 (8 Sets) 74 Stainless P-trap, For Lavatory (7 Sets) 75 Stainless Bidet, Chrome-plated, Spray (14 Sets) 76 Gi Welding Electrode (20 Kgs.) 77 Sanitary Pipes, S1000, 2” (12 Pcs.) 78 Louver-type Solid Panel Door, 1000 X 2100 X 40, Gloss Choco Brown (1 Set) 79 Louver-type Solid Panel Door, 700 X 2100 X 40, Gloss Choco Brown (1 Set) 80 Louver-type Solid Panel Door, 800 X 2100 X 40, Gloss Choco Brown (2 Sets) 81 Louver-type Solid Cafe Door, 500 X 1600 X 40, Gloss Choco Brown (7 Sets) 82 Door Jamb, Good Quality, 1m (1 Set) 83 Door Jamb, Good Quality, 0.7m (1 Set) 84 Door Jamb, Good Quality, 0.8m (2 Sets) 85 Door Jamb, Good Quality, 0.5m (7 Sets) 86 Stainless Flexible Hose, ½” X 12” (9 Pcs.) 87 Angle Valve, 2-way (8 Pcs.) 88 Angle Valve, Single (7 Pcs.) 89 Metal Single Robe Hook (12 Pcs.) 90 Stainless Steel Welding Electrode (5 Kgs.) 91 Non-slippery Porcelain Light Gray Tiles, 60” X 60” (197 Pcs.) 92 Glossy White Tiles, 30” X 60” (712 Pcs.) 93 Granite Slab, 60mm X 220mm (3 Pcs.) 94 Tile Adhesive, 25kg/bag (20 Bags) 95 Tile Grout, White, 2kg/bag (30 Bags) 96 Stainless Steel Tube, 2” Ø (12 Pcs.) 97 Stainless Steel Pipe Fitting, 90°, 2” Ø (12 Pcs.) 98 Pwd Stainless Grab Bar (3 Sets) 99 Awning-type Window W/ Analok Framing, 0.5m X 0.5m, Refer To Plan (8 Sets) 100 Awning-type Window W/ Analok Framing, 0.5m X 1.5m, Refer To Plan (4 Sets) 101 Common Wire Nails, 2”, 10kg/bag (2 Boxes) 102 Common Wire Nails, 3”, 10kg/bag (2 Boxes) 103 Common Wire Nails, 4”, 10kg/bag (3 Boxes) 104 Concrete Nails, 4”, 10kg/bag (1 Box) 105 Coco Lumber, 2” X 2” X 12’ (150 Pcs.) 106 Coco Lumber, 2” X 3” X 12’ (150 Pcs.) 107 Phenolic Board (20 Sheets) 108 Pvc Vertical Tank, 2000l (2 Pcs.) 109 Pvc Horizontal Tank, 1000l (1 Pc.) 110 Water Pump, 0.75hp (1 Set) 111 Bladder Tank, 20l (1 Set) 112 Pressure Gauge (1 Pc.) 113 Float Ball Valve (2 Pcs.) 114 Ppr Gate Valve, ½” (3 Pcs.) 115 Ppr Check Valve, ½” (4 Pcs.) 116 Double Float Suspension (3 Pcs.) 117 Ppr Pipe, ¾” Ø, Red Line (8 Pcs.) 118 Sanitary Coupling, 4” Ø (13 Pcs.) 119 Ppr Female Elbow, ½”, Metal Thread (45 Pcs.) 120 Ppr Coupling, ½” (25 Pcs.) 121 Ppr Ball Valve, ½” (2 Pcs.) 122 Ppr Ball Valve, ¾” (2 Pcs.) 123 Electric Impact Drill, Heavy-duty, Good Quality, 750w Min. (2 Units) 124 Angle Grinder, Heavy-duty, Good Quality, 710w Min. (2 Units) 125 Tie Wire #16 (50 Kgs.) 126 Glazing Putty (5 Gals.) 127 Flat Wall Enamel (10 Gals) 128 Enamel Quick-dry, White (10 Gals.) 129 Paint Thinner (5 Gals.) 130 Liquid Tile Tinting Color, Venetian Red, Full Tone (6 Pints) 131 Liquid Tile Tinting Color, Raw Sienna, Full Tone (6 Pints) 132 Liquid Tile Tinting Color, Hansa Yellow, Full Tone (6 Pints) 133 Liquid Tile Tinting Color, Bulletin Red, Full Tone (6 Pints) Note: For Details On Door & Window Dimensions & Specifications, Please Refer To The Pdmeo (project Development Management & Evaluation Office). ______________________________ Supplier’s Signature Over Printed Name The Schedule Of Bac Activities Is As Follows: 1. Pre-bid Conference - December 23, 2024, @ 10:00a.m. 2. Receipt And Opening Of Bids - January 6, 2025, @ 10:00a.m. 3. Bid Evaluation - January 7-14, 2025 4. Post-qualification - January 7-14, 2025 5. Issuance Of Notice Of Award - January 15, 2025 6. Contract Preparation & Signing - January 16, 2025 7. Issuance Of Notice To Proceed - January 16, 2025 The Criteria To Be Used For The Eligibility Check Of Prospective Bidders, Examination And Evaluation Of Bids, Post-qualification And All Matters To This Procurement Shall Be Under Republic Act No. 9184 (the Government Procurement Reform Act) And Its Implementing Rules And Regulations. Interested Bidders May Obtain Further Thank Important Notice To Bidders: 1. Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents Of Five Thousand Pesos (p 5,000.00). It May Also Be Downloaded From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Non-refundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 2. All Bidders Are Required To Post A Bid Security In The Form Of A Cash/bank Guarantee (2% Of Abc) Or Surety Bond (5% Of Abc) Or Bid Securing Declaration. 3. The Bidder Shall Prepare An Original Technical And Financial Proposal, Copy 1 And Copy 2. 4. State The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative In A Sealed Envelope. 5. Warranty Shall Be For Three (3) Months For Supplies And Materials. One (1) Year For Equipment From The Date Of Acceptance By The Procuring Agency. 6. All Erasures Must Be Initialed To Avoid Disqualifications. 7. Late Submission Of Bids Will Not Be Accepted. Approved By: (sgd.) Jocelyn P. Remoto Bac Chairperson The Zamboanga Peninsula Polytechnic State University Reserves The Right To Reject Any Or All Bids, Accept The Bid Most Advantageous To The Government, And Award The Contract By Lot.

Details: Description Table (80cm X 50cm ) 1 Pc ₱4,500.00 Minimalist Home Office Desk Table (80cm X 50 Cm X 74 Cm) 2ft 8in X 20in X 2ft 5in, Wood Panel, Type: Panelboard Chairs(monoblock) 10 Pcs ₱7,500.00 Bookshelves (33.5 X 64 X 164 Cm) Lwh 2 Pc ₱14,500.00 Size:64x33.5x164cm (lqwh, Beige, Particle Board, Metal Frame 5 Layers Bookshelf Curtains (white/215cm X 150 Cm) 2 Pcs ₱1,300.00 1pc Plain Fabric Curtain With Rings 200*130cm For Window Door Room Colorful Decoration, Size 200(l)*130cm (w) First Aid Kit 1 Pc ₱3,900.00 Size: 22.1x17.2x9,3cm/8.7x6.7inch Weight:840g/1.8lbs,600d Polyester Color:green Packaging Includes (165pcs) 1 Xfirst Aid Kit Bag 60 X Adhesive Dressings 2x Triangular Bandage 96*96*136cm X 1first Aid Booklet 2 X Pressure Bandages 10*450cm 1x Hypo Allergenic Tape Whiteboard(90cm X 60cm) 3 Pc ₱5,100.00 Whiteboard Eraser 3 Pcs ₱225.00 Cork Board (90cm X 60cm) 3 Pcs ₱5,250.00 Whiteboard Markers 12 Box ₱1,140.00 Bond Papers (long) 5 Ream ₱2,850.00 Cartolina (lighth Colors) 20 Pcs ₱2,100.00 Ballpens 5 Boxes ₱1,315.00 Notebook 20 Pcs ₱600.00 Pencil 12 Boxes ₱1,356.00 Crayons 10 Boxes ₱600.00 8 Color Nontoxic Generic Crayons Art & Crafts School Supplies Packing Tape4 5 Pcs ₱375.00 Double Sided-tape 5 Pcs ₱225.00 12mm-1/2inch / 18mm-3/4inch Rubber Mats For Toddlers 2 Sets ₱1,300.00 Number + Alphabet (36pcs):15cm*15cm Hammocks For Toddler 3 Pcs ₱2,250.00 Made Of Solid Rattan Wood With Quality Polyester/cotton (small) Sewing Kits Inclusion: 30sets Of Content:rolls, 1x Needle Piercing Device, 10pcs Hand Sewing Needles, Scissors 1pc, 1 Thimble, Tape 1pcs 2 Pcs ₱900.00 Portable Sewing Machine 1 Pc ₱12,300.00 Max. Sewing Speed:350 Spm Max. Sewing Thickness:2.5 Mmpower: 7.2 Winput: 220v-240v 50/60hzoutout:dc 6v 1200ma/4aa Batteries Product Size: 26x27x12cmplug Type: Uk Plug Pillows Vaccumbale 5 Pcs ₱2,250.00 Pillow Cases(18 X 28) 5 Pcs ₱1,125.00 Blanket (single) 5 Pcs ₱2,250.00 Sleeping Mat Water Proof Air Mattres 5 Pcs ₱7,750.00 Color: Blue/navy Blue/orange/camouflage (optuional) Material: Nylon +tpu: Bearing Capacity: Max 200kg/ 440lb: Inflating Size: 190*60*5cm/ Weight: Approx.590g/1.3lb/package Size:26*10*10cm/package Size:approx.800g Toys For Toddlers 20 Pcs ₱6,000.00 Ability Of Thought And Practice, Visual, Interest Training, Sensory, Parent-child Communication, Hand-eye Coordination, Interactive Safe And Non- Toxic/specifications: Material: Wooden Applicable Age: 12 Months+ Size 20* 20cm Breast Feeding Anti-glare Cove 10 Pcs ₱3,500.00 Cotton, 100*70cm, Package Includes:1pc * Breasfeeding Covers, 1 Storage Bag Flashlight 10 Pcs ₱3,500.00 Lamp Core: White Laser Lamp Core+cob (side Lamp), Product Performance: Long Range 5000n+: Lighting Mode: Strong Light/medium Light/strobe/side Lightd, Weight: 130g/ Charging Method: Type-c Fast Charge/ Usb/ Size 160* 45mm/ Power Sjupply Method: 18650 Power Power Lithium Battery/ Material: High Strenght Abs Material/ Waterproof Performance: Ipx4 Storage Box (90l) Clear 3 Pcs ₱2,070.00 "kids Thick Rectangle Table With 6 Chairs (120 1 X 60w X 52h Cm) " 4 Sets ₱30,000.00 Multi Functional Wooden Bookshelf (5 Layer 80x24 X 150 Cm) 4 Unit ₱18,000.00 Storage Box (75l) 2 Boxes ₱1,560.00

Details: Description Invitation To Bid The City Of Bayawan, Through Its Bids And Awards Committee (bac), Invites Suppliers / Manufacturers / Distributors / Contractors To Bid For The Hereunder Projects: Lot No. I Tarpaulin Printing 1 4 Lot "labor And Materials ( Tarpaulin Printing ) 4 Sets - 2' X 4' (signage)" Lot No. Iii Sand & Gravel 4 7 Cu.m. Sand, Washed, Mixing/screened 5 8 Cu.m. Gravel, Mixing, Crushed, Screened & Washed, Max. Size 38mm Dia Lot No. V Construction Supplies/materials 16 72 Kg/s Tie Wire, # 16 17 3 Kg/s Nylon, #100 18 5 L.m. Mesh Wire, 3mm Eyehole X 0.90m Width (m) 19 15 Pc/s Blade, Hacksaw, 12mm X 300mm, 18tpi, (excellent Quality) 20 5 Kg/s Nails, Concrete, 75mm 21 6 Kilo/s Nails, Umbrella/roofing, 62mm 22 2 Box/es Nails, Common Wire, 100mm (25kgs/box) 23 1 Box/es Nails, Common Wire, 75mm (25kgs/bx) 24 1 Box/es Nails, Common Wire, 62mm (25kgs/box) 25 1 Box/es Nails, Common Wire, 38mm (25kgs/box) 26 3 Box/es Rod/electrode, Welding, E6013, 1/8" (bx)) (matchless Quality, Iso 9001, 2000 Certified, 20 Kg/box) 27 6 Pc/s Drill Bit, Masonry, 1/8" Dia 28 9 Pc/s Drill Bit, 1/8" Dia, For Steel 29 3 Pc/s Drill Bit, 3/16" Dia, For Steel 30 3 Pc/s Drill Bit, 1/4" Dia, For Steel 31 3 Pc/s Drill Bit, 3/8" Dia, For Steel 32 3 Pc/s Drill Bit, Masonry, 3/16" Dia 33 3 Pc/s Drill Bit, Masonry, 1/4" Dia 34 3 Pc/s Drill Bit, Masonry, 3/8" Dia 35 13 Pc/s Cutting Disc, Masonry/concrete, 100mm 36 10 Pc/s Cutting Disc, 100mm Dia, For Metal 38 5 Can/s Silicon Sealant, (300ml/can), For Polycarbonate 39 2 Can/s Sealant, Elastomeric/roof (1 Lit/can) 40 2 Can/s Solvent Cement, Pvc (500 Cc/can) 41 2 Roll/s Sack Cloth, 2.40m Width (100m/roll), Blue 42 10 Can/s Epoxy All Purpose (a And B), 1/4 Lit/can, Non Conductive, All Purpose Adhesive 43 50 Set/s Lag Screw, 6mm Dia. X 32mm With Expansion Shield 44 200 Set/s Bolt, Fine Threaded, 3.5mm X 25mm, With Nut And Washer 45 1 Sheet/s Steel Plate, G.i., Gauge # 16 X 1.2m X 2.4m 46 20 Pc/s Tiles, Granite, Polished, 0.60m X 0.60m, Color: Jet Black 47 65 Pc/s Tiles, Floor, Ceramic, 40cm X 40cm Non Skid 48 14 Pc/s Staircase Nosing, Brass Ochre (2m/length) 49 6 Pack/s Tile Grout (2kg/pk), Light Beige 50 1 Can/s Acrylic Spray Paint, Flat Black(400cc/can) 51 1 Lit/s Paint, Enamel, Quick Dry (lit), Red 52 10 Gal/s Paint, Rubberized (gal), Chlorinated, Floor Coating, Marking Yellow Or Equivalent 53 5 Gal/s Paint, Rubberized (gal), Chlorinated, Floor Coating, Black 54 12 Gal/s Paint, Rubberized (gal), Chlorinated, Floor Coating, White Or Equivalent 56 1 Gal/s Paint, Epoxy, Silver Finish With Aluminum With Catalyst 57 15 Gal/s Paint, Epoxy, Enamel, Black (gal) 58 4 Gal/s Enamel Paint, Silver Finish Aluminum (gal) 59 3 Can/s Thinner, Lacquer (3.75lit/can) 60 11 Gal/s Reducer/thinner, Epoxy Paint (gal) 61 8 Gal/s Adcoat Rust Converter And Primer 62 6 Gal/s Liquid Tile Paint, Primer White Acrylic Solvent-based Primer 63 6 Gal/s Liquid Tile, Topcoat Gloss White 64 4 Gal/s Liquid Tile, Top Coat Clear 65 5 Can/s Liquid Tile, Solvent Based-tinting Color Venetial Red, 1/4lit Per Can 66 5 Can/s Liquid Tile, Solvent Based-tinting Color Thalo Blue, 1/4lit Per Can 67 5 Can/s Liquid Tile, Solvent Based-tinting Color Thalo Green, 1/4lit Per Can 68 5 Can/s Liquid Tile, Solvent Based-tinting Color Hanza Yellow, 1/4lit Per Can 69 5 Can/s Liquid Tile, Solvent Based-tinting Color Lamp Black, 1/4lit Per Can 70 5 Gal/s Liquid Tile, Reducer Clear Liquid 71 10 Gal/s Plexibond, Cementitious Waterproofing System, Acrylic 72 10 Pc/s Sand Paper, #80, 225mm X 275mm 73 10 Pc/s Sand Paper, #100, 225mm X 275mm 74 10 Pc/s Sand Paper, #120, 225mm X 275mm 75 10 Pc/s Sand Paper, # 180, 225mm X 275mm 76 14 Pc/s Paint Roller W/ Handle, 100mm 77 150 Meter/s Service Drop Wire, # 4 Awg (m) 78 5 Pc/s Service Grip, # 2 79 4 Pc/s Service Grip, Dead End Performed Type, Size # 4awg 80 1 Length/s Pipe, Pvc, 40mm Dia X 3m, W/ Entrance Cap, Clip Type 81 70 Meter/s Thw Wire, # 4 (22mm2), Black (m) 82 70 Meter/s Thw Wire, # 4 (22mm2), White (m) 83 40 Meter/s Thw Wire, # 6 (14mm2), Stranded(m), Green 84 1 Roll/s Thw Wire, # 10 (5.5mm2), Stranded (150m/bx), Black 85 1 Roll/s Thw Wire, # 10 (5.5mm2), Stranded (150m/bx), White 86 1 Roll/s Thw Wire, # 10 (5.5mm2), Stranded (150m/bx), Green 87 6 Roll/box Thw Wire, # 12 (3.5mm2), Stranded (150m/roll/bx), Black 90 1 Length/s Pipe, G.i. 65mm Ø X 6m, Wt=5.20mm , Outside Dia= 73.00, 8.694kg/m, Heavy Gauge 92 1 Pc/s Circuit Breaker, 100a, 2 Pole, Bolt-on, Single Phase W/ Casing, Outdoor Type 93 1 Pc/s Circuit Breaker, 30a, 2 Pole, Bolt-on 94 3 Pc/s Circuit Breaker, 20a, 2 Pole, Bolt-on, Single Phase W/ Casing, Outdoor Type 95 4 Roll/s Royal Cord, # 14 Awg, 2 Wire (75m/roll) 96 7 Length/s Pipe, Pvc, Electrical, 40mm Dia X 3m, Thickwall, Orange 97 200 Length/s Pipe, Pvc, Electrical, 25mm Dia X 3m, Thickwall, Orange 98 150 Length/s Pipe, Pvc, Electrical, 20mm Dia X 3m, Thickwall, Orange 99 3 Pack/s C-clamp/clip, Pvc, 20mm Dia, W/ Concrete Nails (100's/pk) 100 6 Pack/s C-clamp/clip, Pvc, 25mm Dia W/ Concrete Nails (100pcs/pk) 101 3 Pack/s Pipe Connector, Pvc, Electrical, 20mm Dia (100's/pk)) 102 3 Pack/s Pipe Connector, Pvc, Electrical, 25mm Dia (100pcs/pk) 103 10 Pc/s Connector, Split Bolt, # 6 (14mm2), Burndy 104 3 Set/s Magnetic Contactor, 40a 220-240vac Coil W/ Metal. Enclosure 105 2 Pc/s Photo Control (photo Switch), 220v, 6a, Operating Illumination: Turn-on At 31.5 Lux, Turn-off At 125 Lux 106 2 Unit/s Timer, Time Switch, 24hr Back Up 107 50 Roll/s Tape, Electrical, Vinyl, .177mm X 3/4"/19mm X 16m, Flame Retardant, 600v 108 5 Roll/s Tape, Electrical, Rubber, 18mm X 5m, Self Fusing Ethylene Propylene Rubber 109 5 Roll/s Tape, Electrical, Waterproof, 600v 111 29 Set/s Recessed Ground Lamps, Ip67 1w, Ac85-265v Dc 12v (1 Side), Natural White (4000k), 42mm X 70mm 113 8 Set/s Metal Hallide Flood Light Fixture 250w Set With Tubular Metal Hallide Bulb (firefly), Warm White, Model: Flh 121/s/250/fhimh 250dl/t 114 10 Set/s Solar Blinker Arrow Signage Warning Lights, Direction Signs, Size: Length:47"; Height:42", Arrow Sign, Size: Length: 47"; Height:16", Solar Panel Size: 10" X7", Led Color: Red, Ip Grade: Ip54 119 18 Set/s Lamp Post, Steel Tapered, Single Arm,t-6-30' Sb Bracket Type, W/ Base Plate, Anchor Bolt, Nut & Washer, Electroplated Silver Finish, Amco 120 6 Set/s Lamp Post, Steel Tapered, Double Arm, T-6-30' Db Double Arm, Bracket Type, W/ Base Plate, Anchor Bolt, Nut & Washer, Electroplated Silver Finish 122 32 Pc/s Led Fountain Lights, Rgb With Stainless Steel Toughed Glass Cover, Ac 220; Dc 12-24v Dmx 512 Built In Control With Decoder, 9x3w Led Rgb Color Changing 2700-6500k Ip68 Water Proof Grade Junction Box 124 5 Roll Cable Wire; 5c X 16 Twg/1.025mm Premium Multi-conductor Royal Cable Wire (75m/roll) 126 32 Set/s Fountain Nozzle, 1.0" Dn40 Female Thread Flower Column Style Fountain Nozzle Sprinkler Spray Head, Brass 127 1 Unit/s 37.5 Kva Ditribution Transformer, 7620/13200vy - 240/480 Volts Oisc, W/ 2-2½, Taps Above And N.v., Fuse Link, Fuse Cut-out And Accessories 128 2 Meter/s Fuse, Cut-out, 100a, 25kv, Ab Chance 129 1 Set/s Transformer Cluster Hanger, With Complete Accessories 130 1 Pc/s Clamp, Hot Line, #2 - #4/0 Acsr 131 3 Set/s Pull Box, Metal Enclosure, 900mm X 200mm X 150mm, With Cover 132 50 Pc/s Screw, Lag Screw, 10mm Dia X 50mm, W/ Plain Washer And Expansion Shield 133 200 Pc/s Bolt With Nut And Washer, (fine Thread) 3.5mm Dia X 25mm 134 200 Pc/s Bolt With Nut And Washer, (fine Thread) 4.5mm Dia X 25mm 135 5 Pack/s Ubolt Galvanized/ U Bolt With Nut And Washer Inches For Gi Pipe Screw Depot, 1/4 For 3", 1/4" Dia, 10 Pcs Per Pack 139 30 Gal/s Concrete Epoxy, With Low Viscosity For Construction 140 22 Length/s Pipe, Upvc, 20mm Outside Dia, Wt=1.8min, L=3.0m, Blue 141 12 Pc/s Tee, Upvc, 20mm Inside Dia, Blue 142 14 Pc/s Elbow, Upvc, 20mm Inside Dia X 90 Deg. Bend, Plain, Blue 143 4 Pc/s Tee Reducer, Upvc,32mm X 20mm Nominal Dia, Blue 144 3 Pc/s Tee, Upvc, 25mm Inside Dia, Plain, Blue 145 4 Pc/s Adaptor, Upvc, Male, 20mm Dia., Nominal Size, Blue 146 8 Pc/s Adaptor, Upvc, Female, 20mm Dia Nominal Size, Blue 147 4 Pc/s Ball Valve, Pvc, 20mm Outside Dia 148 10 Length/s Pipe, Upvc, 32mm Outside Dia, Wt=2.0min, L=3.0m, Blue 149 1 Pc/s Gate Valve, 25mm Dia, Brass/bronze 150 1 Pc/s Check Valve, 25mm Dia, Brass/bronze 151 2 Pc/s Adaptor, Upvc, Male, 25mm Dia., Nominal Size, Blue 152 8 Length/s Pipe, Upvc, 50mm Outside Dia, Wt=2.30min, L=3.0m, Blue 153 2 Pc/s Elbow, Upvc, 50mm Outside Dia X 90 Deg. Bend, Plain, Blue 154 2 Pc/s Elbow, Upvc, 50mm Outside Dia X 45 Deg. Bend, Plain, Blue 155 2 Pc/s Adaptor, Upvc, Female, 50mm Outside Dia., Blue 156 3 Pc/s Gate Valve, 40mm Dia, Brass/bronze 157 5 Pc/s Check Valve, Horizontal Swing 40mm Dia, Brass/bronze 158 6 Length/s Pipe, Upvc, 50mm Outside Dia, Wt=2.30min, L=3.0m, Blue 159 2 Pc/s Tee, Upvc, 32mm Inside Dia, Blue 160 2 Pc/s Adaptor, Upvc, Female, 50mm Outside Dia., Blue 161 4 Pc/s Elbow, Upvc, 50mm Outside Dia X 90 Deg. Bend, Plain, Blue 162 2 Pc/s Elbow, Upvc, 50mm Outside Dia X 45 Deg. Bend, Plain, Blue 163 4 Length/s Pipe, Pvc, 57.15mm Outside Dia X T=2.54mm X L=3.0m, S-1000, Orange 164 2 Pc/s Elbow, Pvc, 57.15mm Inside Dia X 90 Deg. Bend, S-1000, Orange 165 2 Pc/s Elbow, Pvc, 57.15mm Inside Dia X 45deg Bend, S-1000, Orange 166 8 Length/s Pipe, Pvc, 82.55mm Outside Dia X T=3.75mm X L=3.0m, S-1000, Orange 167 2 Pc/s Pvc Tee, Inside Dia: 82.55mm, S-1000, Orange 168 2 Pc/s Floor Drain, 150mm X 150mm Dia, Stainless 169 8 Length/s Pipe, Pvc, 107.10mm Outside Dia X T=3.81mm X L=3.0m, S-1000, Orange 170 2 Pc/s Elbow, Pvc, 107.10mm Inside Dia X 90 Deg. Bend, S-1000, Orange 171 2 Pc/s Pvc Elbow, Inside Dia: 107.10mm X 45 Deg Bend, S-1000, Orange 172 1 Pc/s Gate Valve, 100mm Dia, Brass/bronze 173 1 Pc/s Gate Valve, 80mm Dia, Brass/bronze, Threaded Type 174 3322.536611 Sq.ft. Brass Metal Etching Engraved Marker 175 5 Pc/s Hat, Hard, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, Brown 176 20 Pc/s Hat, Hard, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, Yellow 177 20 Pc/s Vest, Reflectorized, Safety, Orange 178 20 Pair/s Raincoat, Jacket W/ Hood & Pants, Size: X-large With Reflectorized Strips 179 15 Pc/s Plastic Road Barriers 180 20 Pc/s Spectacles, Safety Goggles, Clear 181 8 Pair/s Gloves, Welding Leathear Long, 16', Ce Certified En 12477 182 5 Roll/s Caution Tape, Yellow, 3" X 50' 183 5 Roll/s Danger Tape, Red, 3" X 50' 184 15 Pc/s Traffic Cones 28" Tall, 14" X 14" Base With Reflective Collars Lot No. Vi Road Stud Installation 137 1 Set/s Solar Road Stud Installation Machine, Equipped With Running Wheel, Accurate Hole Position With Good Hole Forming Quality, 5.0hp, 220v With 3900w 50/60hz, 570rmp; Height: 800mm; Weight: 200kgs; Pure Copper Self-priming Pump, Manual Electric Starter, Free Adjustment Depth And Bearing Seat Assembly Complete With Coring Bit And Other Accessories ** ** ** Nothing Follows ** ** ** Bid Documents Shall Be Available At The Bac Office, New City Hall, Lgu Bayawan City Upon Payment Of Prescribed Non-refundable Fee In The Amount Of Php 5,000.00 Bidders Shall Drop Their Technical And Financial Proposals In The Bid Box At The Bac Office, Bayawan City On Or Before The Deadline Of Submission Of Bids As Shown Below. All Particulars Relative To Eligibility Process, Opening And Evaluation Of Bids, Postqualification And Award Of Contract Shall Be Governed By The Applicable Provisions Of Ra. 9184. The City Of Bayawan Reserves The Right To Reject Any Or All Bids, To Waive Any Defects Or Formality Therein And To Accept Bids Considered Responsive And Most Advantageous To The Government. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule Issuance Of Bid Documents December 17, 2024 To January 6, 2025 @ 5:00 Pm Pre-bid Conference December 26, 2024 @ 9:00 Am Deadline/opeing Of Bids January 7, 2025 @ 9:00 Am Post Qualification January 14, 2025 @ 9:00 Am Awarding Of Bids January 21, 2025 @ 9:00 Am Approved: (sgd)virginia D. Sadiasa City Civil Registrar Bac Chairman Received By: Name:___________________________ Date:___________________________ Geps Publication : Geps December 17, 2024 Newspaper : None

Details: Description 1. Angle Grinder With Accessories (branded) Specifications: Rated Input Power: 710w Disc Diameter: 100mm Brush Diameter: 100mm 2 Pieces 2. Portable Inverter Arc Welding Machine (branded) Specifications: Power Supply Voltage: 220 – 240v Rated Input Capacity: 28kva Ampere Range: 20 – 450amps 2 Pieces 3. Flip – Up Automatic Welding Helmet Specifications: Changeable Battery Automatic Darkening Welding Filter Variable Shades: 5 – 8 And 9 – 13 2 Pieces 4. Leather Welding Apron 2 Pieces 5. Leather Welding Gloves 2 Pairs 6. Grinding Helmet Specifications: Atleast 200mm High Grinding Visor 4 Pieces 1. Marine Type Plywood (local) 4ft X 8ft X 5mm Type: Type 1 (marine Plywood) 25 Pieces 2. Marine Type Plywood (local) 4ft X 8ft X 10mm Type: Type 1 (marine Plywood) 25 Pieces 3. Marine Type Plywood (local) 4ft X 8ft X 18 Mm Type: Type 1 (marine Plywood) 25 Pieces 1. Branded Premium Marine Type Plywood 4ft X 8ft Thickness: 5mm Type: Type 1 (marine Plywood) Approximately 8 – 9kgs Per Piece 10 Pieces 2. Branded Premium Marine Type Plywood 4ft X 8ft Thickness: 10mm Type: Type 1 (marine Plywood) Approximately 19– 20kgs Per Piece 10 Pieces 3. Branded Premium Marine Type Plywood 4ft X 8ft Thickness: 18mm Type: Type 1 (marine Plywood) Approximately 30 – 33kgs Per Piece 10 Pieces 1. Plasma Cutter Specifications: Current Input: 1ph 10 – 40a Torch Tpt40 (4 Meters) W/ Earth Clamp, 2 Meters Cable, 10mmˆ2 Inclusion For Tpt40 Plasma Torch: Alteast 4 Pieces Of Nozzles, 10 Pieces Of Tips, 2 Pieces Of Diffusers, 10 Pieces Of Electrodes 1 Unit 2. Mig/mag Welding Machine Specifications: 250a 240v 1hp Torch 250a (3 Meters) Earth Clamp (2.5 Meters) 190cr Co2 Flow Gauge Regulator Cga – 320 Inclusion Welding Mask And Gloves Feedroll Φ 0.8/1.0 Feedroll Φ 0.8/1.2 Contact Tip M6 1.0mm X 28mm (atleast 1 Piece) Carbon Teflon Liner I.d 1.5mm 3.5m – Black W/ 0.8 – 1.0mm (atleast 1piece) Carbon Teflon Liner I.d 1.5mm 3.5m – Black W/ 1.0 – 1.2mm (atleast 1piece) 1 Unit 1. 200 Liters Plastic Chemical / Water / Oil Barrel Specifications: Hdpe Plastic Vertical Water Drum Bucket Type: Double Ring Closed Top Color: Blue 18 Pieces 2. ½” Galvanized Iron Pipe (s-20) Diameter: ½”, 6m Length 45 Pieces 3. ¾” Galvanized Iron Pipe (s-20) Diameter: ¾”, 6m Length 28 Pieces 4. 1” Galvanized Iron Pipe (s-20) Diameter:1”, 6m Length 40 Pieces 5. 1 ¼” Galvanized Iron Pipe (s-20) Diameter: 1 ¼”, 6m Length 10 Pieces 6. 1 ¼” Galvanized Iron Pipe (s-40) Diameter: 1 ¼”, 6m Length 10 Pieces 7. 2” Galvanized Iron Pipe (s-40) Diameter: 2”, 6m Length 10 Pieces 8. 2 ½” Galvanized Iron Pipe (s-40) Diameter: 2 ½”, 6m Length 10 Pieces 9. 3” Galvanized Iron Pipe (s-40) Diameter: 3”, 6m Length 10 Pieces 10. 4” Galvanized Iron Pipe (s-40) Diameter: 4”, 6m Length 10 Pieces 11. 1” Mild Steel Flat Bar Thickness: 2mm; 6m Length 15 Pieces 12. 2” Mild Steel Flat Bar Thickness: 5mm; 6m Length 25 Pieces 13. 3” Mild Steel Flat Bar Thickness: 5mm; 6m Length 10 Pieces 14. Mild Steel Checkered Plate Dimensions: 4ft X 8ft; Thickness: 10m 5 Pieces 15. Mild Steel Plate Dimensions: 4ft X 8ft; Thickness: 10mm 2 Pieces 16. Grade 4 Deformed Steel Bar Diameter: 12mm; 6m Length 10 Pieces 1. Welding Protection Apron Material: Cowhide – Leather Type: Long Sleeve Apron Durable; Heat And Flame Resistant One Size Fits All 5 Pieces 2. Pvc Apron Material: Pvc Apron Pc – 2151 Color: Gray Chemical Resistant Suits 10 Pieces 3. Good Quality Leather Welding Gloves Ai – 140 Welding Gloves With Linings Size: 13 Inches Color: Orange 5 Pairs 4. Working Cover – All Suits (ppe) Color: Gray Durable, Waterproof Sizes: 3 Pieces Small (s) 3 Pieces Medium 2 Pieces Large 2 Pieces Extra Large 25 Pieces 5. White Cloth Sleeve Washable Clothe Sleeve Arm Protection 20 Pairs 6. White Safety Helmet (hard Hat) Material: Abs Inclusive Of Chin Strap Color: White 25 Pieces 7. Safety Life Vest Working Type Life Vest With Whistle And Reflector 15 Pieces 8. Welding Protection Mask Moisture Proof Welding Mask Polupropylene Shell 5 Pieces 9. Marine Life Buoy/ring About 2.5kg Life Ring Solas Approved Life Ring Outside Diameter: 725mm Inner Diameter: 445mm Buoyancy: ≥14.5kg Buoyancy Material: Urethane Foam Shell: High Density Polyethylene With Reflector 5 Pieces 10. Industrial Safety Boots Color: Black Ce Approved En20345 – S1p Steel Toe Cap Steel Midsole Anti – Static And Anti – Vibration And Oil Resistant And Slip Resistant Split Leather Upper Size: 2 Pairs For 7 Uk Size 2 Pairs For 8uk Size 2 Pairs For 9uk Size 2 Pairs For 10uk Size 2 Pairs For 12uk Size 10 Pairs 11. Led Flashlight With 4 Sets Of Extra Batteries 2 Cell Battery Explosion Roof Color: Orange And Black 2 Pieces 12. Branded High Quality Steel Tape Measure Length: 3 Meters 2 Pieces 13. Branded High Quality Steel Tape Measure 2 Pieces 14. Branded High Quality Steel Tape Measure Length: 8 Meters 2 Pieces

Details: Description 1. The Department Of Agrarian Reform (dar), Catanduanes Provincial Office Through The Cy-2025 National Expenditure Program (nep) Intends To Apply The Sum Of One Hundred Thirty-eight Thousand Three Hundred Eighty Pesos & 00/100 (php 138,380.00) Being The Abc To Payments Under The Contract For Cy-2025 Procurement Of Janitorial Supplies Of Dar Catanduanes Provincial Office (darcat-pb-epa2025-014). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Item No. Description Unit Of Measure Quantity Price / Unit Total Price 1 Alcohol, Ethyl Gallon 24 350.00 8,400.00 2 Cleaner, Toilet Bowl And Urinal Liter 24 220.00 5,280.00 3 Detergent Powder, All Purpose Kilo 24 300.00 7,200.00 4 Bleaching Liquid Gallon 4 150.00 600.00 5 Disinfectant Spray, 340g Per Bottle Bottle 50 460.00 23,000.00 6 Dust Pan (big) Piece 3 130.00 390.00 7 Furniture Cleaner, Beeswax Bottle 6 320.00 1,920.00 8 Hand Soap, Liquid, 250 Ml Per Bottle Bottle 50 150.00 7,500.00 9 Trash Bag, Xxl, 10 Pc Per Roll Roll 10 120.00 1,200.00 10 Trash Bag, Medium, 10 Pc Per Roll Roll 40 60.00 2,400.00 11 Trash Bag, Small, 10 Pc Per Roll Roll 20 50.00 1,000.00 12 Muratic Acid Gallon 4 410.00 1,640.00 13 Albatros Deodorizer, 100g Per Pc, 12 Pc Per Pack Pack 24 150.00 3,600.00 14 Brush For Toilet Bowl Piece 10 100.00 1,000.00 15 Glass Cleaner, 500ml Bottle 24 250.00 6,000.00 16 Waterproof Apron Stain Resistant For Kitchen, Medium Piece 4 100.00 400.00 17 Sponge, Big Piece 30 130.00 3,900.00 18 Fabric Conditioner, 900ml Gallon 24 300.00 7,200.00 19 Dishwashing Liquid Gallon 30 250.00 7,500.00 20 Mop With Foam Piece 4 200.00 800.00 21 Trash Bin, 25 Liters Piece 20 300.00 6,000.00 22 Spin Mop Piece 2 500.00 1,000.00 23 Termite X, 1 Liter/bottle Bottle 4 1,600.00 6,400.00 24 Naphthalene Balls, 12 Pcs Per Pack Pack 50 50.00 2,500.00 25 Multi-insect Killer Spray, 600ml Net Bottle 25 400.00 10,000.00 26 Battery, 4pcs Per Pack, Aa, Chargeable Pack 10 200.00 2,000.00 27 Battery, 4pcs Per Pack, Aaa Pack 5 150.00 750.00 28 Glue Gun With Glue Stick Piece 2 600.00 1,200.00 29 Led Bulb, 20 Watts Piece 50 240.00 12,000.00 30 Kitchen Knife, 8” Long Blade Piece 2 150.00 300.00 31 Bolo With Good Quality Handle Piece 2 650.00 1,300.00 32 Disposable Rugs, Round Piece 50 6.00 300.00 33 Doormat (cloth), Rectangle/oblong Piece 50 50.00 2,500.00 34 Sharpening Stone (10x2) Piece 2 200.00 400.00 35 Hand Gloves, Cotton Thick, Big Piece 8 40.00 320.00 36 Rubber Gloves, Big Piece 8 60.00 480.00 Note: Inclusive Of Delivery At Dar Catanduanes Provincial Office Total Abc: Php 138,380.00 2. The Department Of Agrarian Reform (dar), Catanduanes Provincial Office Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By A Period Sixty (60) Days. Bidders Should Have Completed, Within At Least Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Department Of Agrarian Reform (dar), Catanduanes Provincial Office And Inspect The Bidding Documents At The Address Given Below During Regular Office Hours (8:00 Am To 5:00 Pm), Mondays Thru Fridays, Valid For The Duration That This Particular Bidding Activity Is Open From December 19, 2024 – January 7, 2025 Until 12:00 Noon. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 19, 2024 – January 7, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (php 500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented In Person, By Mail, Or Through Electronic Means. 6. The Department Of Agrarian Reform, Catanduanes Provincial Office Will Hold A Pre-bid Conference For This Particular Procurement On December 26, 2024, Thursday, 9:00 Am At Dar Catanduanes Provincial Office, Constantino (pob.), Virac, Catanduanes. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, (ii) Online Or Electronic Submission As Indicated Below, Or (iii) Both On Or Before January 7, 2025 Tuesday, Until 12:00 Noon. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 7, 2025 Tuesday, 1:00 Pm At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agrarian Reform (dar), Catanduanes Provincial Office, Through The Provincial Bids & Awards Committee (bac) Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Ms. Ma. Katrina M. Sarausa Arpo I /head Bac Secretariat Department Of Agrarian Reform (dar) Catanduanes Provincial Office Brgy. Constantino (pob.), Virac, Catanduanes Cellphone Hotline: 09634442986 Email Address: Bacsec.catan@gmail.com 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website For Online Bid Submission: Bacsec.catan@gmail.com 19 November 2024 Atty. Cherry A. Agmata Bac Chairperson

Details: Description Lot 1 - C-0113-0374-24 Repair Improvement Of Pabx Room, Ground Floor, Main Building I. Carpentry (ceiling) 1 Metal Furring Channel 0.6m X 19mm X 50mm X 5m 22 Pcs 2 Metal Furring 0.6m X 12mm X 38mm X 5m 10 Pcs 3 W-clip 30 Pcs 4 Wall Angle 0.6m X 25mm X 25mm X 2.4m 10 Pcs 5 Blind Rivets 1/8 ꬾ X 1/2" 1000pcs/box 1 Box 6 1" Black Screw, Pointed, 500pcs/bag 3 Bags 7 9mm Thk. 4' X 8' Gypsum Board 7 Pcs 8 Riveter, Good Quality 1 Set Ii. Painting A. Ceiling 9 Flat Latex, White, Pq 2 Gallon 10 Boral Powder, 25kilos/ Bag 1 Bag 11 No.100 Sanding Paper 2 Meters 12 4" Paint Roller W/ Tray 1 Set 13 2" Paint Brush 1 Pc B. Wall 14 Semi Gloss Latex, White Pq 2 Gal 15 Hanza Yellow, Achre Color 1 Pint C. Roof Deck 16 Thoroseal, Water Proofing 2 Gals 17 4" Paint Brush 2 Pcs 18 Steel Brush W/ Handle 2 Pcs Iii. Fabrication Of Wooden Cabinet A. Carpentry 19 3/4 Thick 4' X 8' Marine Plywood 5 Pcs 20 1/4 Thick 4' X 8' Marine Plywood 2 Pcs 21 1/2" X 1" X 10' Wood Edging 15 Pcs 22 Stickwel Glue 1 Qrt 23 2" X 4" X 6' Kd Good Lumber 3 Pcs 24 2" Finishing Nail 1 Kg 25 1 1/2 " Finishing Nail 1 Kg 26 4" Pull Handle Stainless 5 Pcs 27 Drawer Guide 18" Heavy Duty Hydraulic 2 Sets 28 Heavy Duty Drawer Lock 2 Pcs 29 No. 3 Concealed Hinges 2 Pcs B. Painting 30 Flat Enamel 2 Gals 31 Q.d.e Odorless, Water Base 2 Gals 32 Poly Tuff W/ Hardener 1 Qrt 33 Paint Thinner 2 Gals 34 No. 100 Sand Paper 1 Meter 35 No. 280 Sand Paper 3 Pcs 36 Stopa Rags, 6" 1 Kl 37 2"paint Brush 1 Pc 38 Achre Color Hanza Yellow/bulletin Red 2 Pint Iv. Electrical 39 Emergency Light, Rechargeable Twinhead Led, 230v, 60hz, 2heads (24 X 0.60 Watts, Led), 6v, 4.5ah Sealed Lead Acid Battery, External Safety Fuse And Battery Test Switch 1 Unit 40 Recessed Type Led Panel Light, 18 Watts, Daylight, 230v, 60hz, Square Type 15 Sets 41 Duplex Convenience Outlet, Wide Series Parallel Slot, Universal 16a, 250vac 1 Set 42 3.5 Mm² Thhn Electrical Wire, Stranded, Black 1 Box 43 20mm Dia. Pvc Pipe / 3mtr 10 Pcs 44 20mm Elbow Pipe 6 Pcs 45 20mm Adaptor With Locknuts 35 Pcs 46 Utility Box (pvc) 4" X 2" X 2" 5 Pcs 47 Junction Box (pvc) 4" X 2" X 2" 18 Pcs 48 Flexible Hose 1/2" Pvc 20 Meters 49 Electrical Tape, Big, 8' Black Color 5 Pcs 50 One Gang Switch, Wide Series, Parallel Slot, 230 Vac 1 Set 51 Three Gang Switch, Wide Series, Parallel Slot, 230 Vac 1 Set Subtotal Lot 2 - C-0113-0385-24 Improvement Of Storage And Pantry Area At Icc Building, 5th Fl. Ims A. Carpentry Works: 1 Wall Angle 0.6mm X 25mm X 25mm X 2.4m 7 Pcs 2 Metal Furring 0.6mm X 19mm X 38mm X 5m 30 Pcs 3 Carrying Channel 0.6mm X 19mm X 50mm X 5m 7 Pcs 4 Riveter, Heavy Duty, Good Quality 1 Pc 5 Screw Adapter 1 Pc 6 Drill Bit 1/8" ꬾ 10 Pcs 7 Diamond Tile Cutter, Blade 4" ꬾ 1 Pc 8 W-clip 100 Pcs 9 Hardiflex, 4.5mm Thk X 4' X 8' 14 Pcs 10 1" Black Screw, Pointed, 500pcs/box 1 Box 11 Blind Rivets, 1/8 ꬾ X 1/2, 1,000 Pcs/box 2 Boxes 12 Cutting Disc For Metal 5 Pcs B. Masonry Works: 13 Ceramic Floor Tiles 40 X 40 (approved By The End-user, Colored Texture) 145 Pcs 14 Tile Adhesive 5 Bags 15 Cement 15 Bags 16 Sand Bistay 100 Bags 17 Tile Grout, 2kg/bag 3 Bags 18 Empty Sacks For Debris 50 Pcs 19 Cutting Disc, 4" For Tiles, Good Quality 2 Pcs C. Painting Works: 20 Flat Latex Paint, White, Premium Quality 1 Pail 21 Semi-gloss Latex, White, Premium Quality 1 Pail 22 Acri-color, Raw Sienna 1 Qrt 23 Acri-color, Lamp Black 1 Qrt 24 Paint Roller With Tray, 9" 1 Set 25 Paint Brush, 2" 1 Pc 26 Boral Powder 1 Bag 27 Sanding Paper #100 2 Mtrs 28 Sand Paper #280 Waterproof 12 Pcs D. Supply And Delivery Of Steele Shelve 29 Prepainted Metal Shelve W/ Hole Nut & Washer (see Attached Plan) 4 Sets 1.02mm Thk. (gauge 18) 1m X .40m X 1.80cm Assembled Slotted Metal Rack Heavy Duty Standard (gray) E. Electrical Works 30 Panel Light 18watts, Led, M Daylight, 1800lm, 50,000 Hrs, 230vac, 8 Set 60hz, Square Type 31 Duplex Convenience Outlet, Wide Series Parallel Slot, Universal 16a, 250vac 7 Set 32 3.5mm2 Thhn Electrical Wire,, Stranded, Black 2 Box 33 Pvc Pipe 1/2" (orange) 10 Length 34 Pvc Elbow1/2" (orange) 6 Pcs 35 Flexible Hose 1/2" Pvc 100mtrs/roll 1 Roll 36 Junction Box (pvc) 4" X 4" X 2" Orange 12 Pcs 37 Utility Box (pvc) 4" X 4" X 2" Orange 15 Pcs 38 Three Gang Switch W/ Element 1 Set 39 One Gang Switch W/ Element 1 Set 40 Electrical Tape 8" (big) Black 5 Pcs 41 Emergency Lights Two (2) Led Lamps, 220vac, 60hz, Wall Mounted With 2 Unit Complete Accessories Total Amount (php) Please Specify Total Amount In Words (php) "terms And Conditions : " "1. All Entries Must Be Typewritten Or Legibly Written. " 2. Delivery Period Within 20 Working Days Upon Receipt Of The Approved Funded Purchase Order (p.o). Administrative Penalties Pursuant To Sec. 69 Of The Revised Irr-ra 9184 Shall Be Imposed For Non- Delivery Without Valid Reason. "3. Warranty Shall Be For A Mininum Of One (1) Year For Equipment And Three (3) Months For Supplies From Date Of Acceptance " By The End-user. "4. Price Validity Shall Be For A Period Of Sixty (60) Calendar Days. " "5. Philgeps Registration Number And Mayor's Permit Shall Be Attached Upon Submission Of The Quotation. " Dti /sec And Latest Tax Clearance Shall Be Submitted Before The Award Of Purchase Order (p.o.). 6. To Establish Financial Capability, Bidders May Attach/includenin Its Quotation A Commited Line Of Credit (clc) Equivalent To 10% Of The Abc, From A Commercial Or Universal Bank. 7. Bidders Must Qoute For All Of The Items And Shall Submit A Proposal On Each Item And Evaluation And Award Of Contract Will Be Undertaken On A Lump Sum Basis. 8. Any Erasure, Correction Or Alteration Made By The Bidders In Any Of The Items Shall Render The Bid Non-complying, Hence, A Ground For Disqualification. 9. The Dpwh Reserves The Right To Accept Or Reject Any Bid To Annul The Bidding Process, And To Reject " All Bids At Any Time Prior To Contract Award Without Thereby Incurring Any Liability To The Affected Bidder. " "10. Please Indicate The Brand And Model For Each Items Being Offered. " "medmier G. Malig Assistant Secretary For Technical Services And Information Management Service Chairperson, Bac For Goods "

Details: Description Republic Of The Philippines Province Of Camarines Norte Municipality Of Mercedes Bids And Awards Committee Bids And Awards Committee Office, Lgu - Mercedes, Camarines Norte Invitation To Bid For Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte. The Local Government Unit Of Mercedes, Camarines Norte, Through The Trust Fund Intends To Apply The Sum Of Two Million Seven Hundred Twenty-five Thousand Two Hundred Sixty-six Pesos Only (php2,725,266.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte - Identification Number 401-24-11-1495/1496/1497/1498/1499. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Local Government Unit Of Mercedes, Camarines Norte, Now Invites Bids For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte As Follows: Item No. Qty Unit Description Lot 1 - Hardware Tools 1 1 Unit Air Compressor Machine, Motor: 1/2 Hp; No. Of Cylinder: 2; Phase: 1; Pressure: 85 Psi; Capacity 46 Liters; Approximate Dimension: 95-100cm (l) X 31-35cm (w) X 64-70cm (h); Weight: 47kg; Inflation Time: 53min; Air Displacement: 208l/min 2 1 Unit Air Spray Gun, Standard Nozzle:1.4mm, Pattern Width:180-250mm, Paint Capacity:600cc, Suitable For Finishing Coat, Optional Nozzle:1.3-2.5mm, Operating Pressure:2-3.5bar Air Cons:4.2-7.1cfm(119-200l/min)" 3 11 Set Angle Grinder Cutting Disk, 10 Pcs.per Set; Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8") 4 11 Unit Angle Grinder, Rated Input Power: 730w; Wheel Diameter: 4"; Rated Voltage: 220v; Frequency: 60hz; No Load Speed: 12,000 Rpm; Weight: Approximately 1.6kg; Grinding Spindle Thread: M10; Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h) 5 7 Pc Chipping Hammer, Item Weight: ‎atleast 13.8 Ounces; Product Dimensions: ‎11" (l) X 1" (w) X 7.5" (h); Material:, Genuine Leather Grip And Forged Steel 6 3 Set Circular Saw With Diamond Blade, 1400w, 185 Mm Blade, Spindle Lock With 24t Diamond Blade 7 3 Pc Claw Hammer, Head Weight: 16oz; Overall Weight: 17oz-23oz; Forged Steel Head; Smooth Face; Fiberglass Handle With Rubber Cushion; Overall Length: 12-14" 8 3 Pc Concrete Chisel, 10'' Forged Steel Chisel 9 3 Pc Crow Bar, 36" Long; Length Tolerance: +- 1/8; Forged Steel Carbon 10 1 Pc Electric Planer; Voltage: 220-240v; Input Power: 1050w; No Load Speed: 1600rpm; Planing Width And Depth: 82x3mm; Heavy Duty Aluminum Base; 11 1 Pc Framing Hammer, Handle Material: Alloy Steel; Item Dimensions: Approximately 16-17" (l) X 5.75-6" (w) X 1.5-2" (h); Item Weight: Atleast 1.4 Pounds 12 1 Unit Gasoline Marine 7hp Speed Type, Single Cylinder; 4 Stroke, Forced Air Cooling; Ohv Displacement (cc): 196 Compression Ratio: 8.5:1 Bore X Stroke (mm): 68x54 Min. Fuel Consumption;395/(kw.h) Valve Clearance: Input Valve: 0.10-0.15mm Idle Speed (rpm): 1400+-140 Max A.c. Output/rpm:3.8/3600 Noise Level:70db (a) Ignition System: Transistorize Magento Ignition Max Torque (n.m/rpm): 10.7/300 Starting System: Recoil Start (recoil Start/electric Starting) 13 10 Pc Hacksaw With Blade, Adjustable Aluminun Alloy Frame With Soft-grip Handle, 90" Adjustable Bladec Angle, 12 Inches (+/- 1/4") Bi-metal Hacksaw Blade, 24 Tpi 14 10 Unit Heavy Duty Corded Drill, Rated Input Power: 750w; Chuck Capacity: Upto 13mm; Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm); Dimension: 268mm (l) X 69mm (w) X 192mm (h); Weight W/out Cable: Approximately 1.6-1.8 Kg; Spindle Collar Diameter Of 43 Mm 15 1 Pc Level, Box Beam Style, Material: Alluminum; Dimension: Approximately 24-24.5" (l) X 2-2.6" (w) X 1.2-1.5" (h); Weight: Atleast 0.8 Pounds 16 3 Pc Mashing Hammer, 3 Lb With Fiberglass Handle, Forged Steel Head 17 3 Pc Masonry Hammer, 800g Solid Rubber Head, Fiberglass Core And Bi-material Slip-resistant Handle, 18 3 Pc Masonry Hand Saw, 15" 380mm Carbon Steel 19 3 Pc Masonry Square, 24"x 16"aluminum, 1/8 '' Thick 20 3 Pc Mason's Level, 60cm Aluminum Reinforced Frame 21 3 Tube Mason's Line, #18 Braided Nylon, 500 Ft, 170 Lb Test 22 10 Set Metal Drill Bit Set, Material: High Speed Steel; 19pcs Per Set (1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm,7.5mm,8mm,8.5mm,9mm,9.5mm,10mm); Point Angle:118degree C; Standards: Din 338; Bit Geometry: Standard Twist Bit 23 8 Pc Meter Tape With Magnetic Hook, Blade Material: Nylon Coated Blade; Dimensions: 16ft (l) X 25mm (w) 24 7 Pc Mig Welding Pliers, Overall Length: Atleast 210mm; Material: High Carbon Steel; Handle Material: Thermoplastic Rubber 25 1 Unit Portable Hand Drill, Power Sourced: Battery Powered - 2pc 21 Volt 1500mah Lithium-ion Batteries; Maximum Rotational Speed: 1500 Rpm; Voltage: 21v; Amperage: 1.5 Amps; Chuck Size: 0.38"; Bit Heads Diameters: From 0.8mm - 10mm; Product Dimensions: ‎9.6" (l) X 2.1" (w) X 7.5" (h); Material: ‎plastic, Rubber, Metal; Item Dimensions: Approx. ‎9.6" (l) X 2.1" (w) X 7.5" (h); Item Weight: Atleast ‎2.5 Pounds; Item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Inspiritech Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws，1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag 26 7 Unit Portable Welding Machine, Input Voltage: 220-240; Frequency: 50-60hz; Output Current: 10-220a; Led Display; No-load Voltage: 85v; Max. Output Current: 220a; Diameter Of Electrode: 1.6-3.2mm; Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable, 27 3 Pc Pull-push Rule, Blade Length 8m/26ft, Blade Width 1", High Impact Abs Case With Durable Rubber, Corrosion Resistant Tru-zero End 28 3 Pc Putty Knife, 3" Stainless Steel With Rubber Handle 29 1 Pc Roofing Hammer: Item Weight: ‎1.25 Pounds; Product Dimensions: Approx. 13.7" (l) X 6.75" (w) X 1.5" (h) 30 1 Unit Sander, Item Dimensions: Approx 11.63" (l) X 5.63" (w) X 6.19" (h); Voltage: 110 Volts; Power Source: Corded Electric; Amperage Capacity:‎ 8.8 Amps; Variable Speed Control Dial (690 -1,440 Ft./min.); Grit Number: 80; Item Weight: Atleast ‎9.5 Pounds; Included Components: ‎belt Sander, 1 Belt, Dust Bag 31 3 Pc Shovel, Rectangular End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 32 3 Pc Shovel, Round End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 33 1 Pc Speed Square, Material: Cast Aluminum; Size: About 18x18x2cm/7.09x7.09x0.79"; Weight: About 130g; Triangle-shaped 34 3 Pc Spirit Level Bar, Aluminum Frame With Magnet, Size 12" (+-1/8"), With 3 Vials (horizontal, Vertical And 45 Degrees) 35 3 Pc Steel Float/plastering Trowel, Thickness 0.7 Mm, Surface Measurement 280mm X 125 Mm(+/- 1mm), High Carbon Steel, Soliod Forged Steel With Plastic Handle 36 1 Pc Trim Hammer, Handle Material: Wood; Head Material: Alloy Steel; Item Dimensions Approximately: 14-15" (l) X 5-6"(w) X 1-2" (h); Item Weight: Atleast 594 Grams 37 3 Pc Trowel, 280x120mm Stainless Plastering Trowel With Plastic Handle 38 1 Pc Utility Knife, Handle Material: Aluminum; Material: Aluminum Alloy; Weight: 120g/pcs; Blade Size: 19mm (w) X 61mm (h) X 0.6mm (t); Blade Material: Steel; Thickness: Atleast 0.6mm 39 7 Pc Welding Helmet, Auto Darkening Helmet, Power Supply: Battery And Solar Powered; Light Shade: Din9-1;, Dark Shade: Din4; Switching Time: 1/25000s; Delay Time: 0.1-0.8s; Sensitivity Adjustment: Stepless Control; Operation Temperature: -5 Degrees- 55 Degrees; Active Viewing Area: 93mmx43mm; Active Viewing Area Size: (+/- 10mm); Item Weight: Atleast 1.85 Pounds; Package Dimensions: ‎approximately 12-12.4" (l) X 9-9.61" (w) X 7-7.68" (h) 40 7 Set Welding Magnets, 6 Pcs/set, Overall Length: Atleast (3"); Hold Capacity: Up To 25lbs; Arrow Design Supports Angle: 45°, 90°, And 135°; Item Weight: 295g; Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches; ‎material: Steel; Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm) 41 1 Set Wood Chisel; 4-piece Set (6mm; 12mm; 19m; 25mm); Tempered Chrome Carbon Steel Blade; Hardened Shank; Rust-resistant, Lacquered Coated Blade; Bi-material Handle 42 3 Pc Wooden Float, 18"x 32", Multi-layered Lot 2 - Food Preparation 1 1 Unit 3 In 1 Burger Griller With Deep Fryer And Steamer, Gas Type; Made Of Stainless Steel And Polished Metal Griddle Plate; Dimensions: Burger Griddle - 18" (l) X 12" (w); Deep Fryer - 8" (l) X 12" (w), Capacity: 2.5 L; Steamer: 11" (l) X 12" (w) 2 6 Unit Barbeque Grill With Sauce Holder And Top Grill, Material: Stainless Steel, Dimension(lwh): 24 In X 12 In X 30 In (3.5 In Grill Pan's Depth) 3 33 Pc Basin; Stainless; Diameter: 22"; Base: 16"; Depth: 7"; Thickness: 1cm 4 47 Pc Beach Umbrella; Round-shaped; Material: Poly Canvass; Diameter: 40""; Pole Stand Length: At Least 45""; Pole Material: Stainless Steel Chrome" 5 6 Pc Boiler Caldero; Big Size & Heavy Duty; Size: Diameter 48cm; Height: 42cm; Makapal, Material: Aluminum 6 6 Pc Boning Knife, 27.3cm, Blade Length:14.6cm, Blade Thickness: 4mm, Wood Handle 7 32 Pc Butcher's Knife; Materials: Stainless; Wood Handle; Size: About 10" 8 29 Pc Caldero With Double Handle; Aluminum Material; Diameter: 46cm; Height: 37cm; With Double Handle; Capacity 5kilos/20l(volume Capacity) 9 48 Set Casserole Set, Stainless Steel, 28, 30 And 32cm Diameter; 16, 18, 20cm Height 10 50 Pc Chef's Knife; About 10 3/4" Long; Material: Stainless Steel; Blade: Full Tang; Riveted Handle 11 56 Pc Chest Cooler, Item Package Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h), Package Weight: ‎5.76kg, Inside Dimensions: 24.95" (l) X 14.58" (w) X 14.77" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l, Color: Any Color 12 51 Pc Chopping Board; Thick Wood; 12"x12" 13 6 Pc Cleaver Knife, 11" Stainless Steel, Weight: 310-340g, Blade Size: 6.5 Inches 14 48 Pc Colander; Stainless Steel; 11"diameter; With Stainless Base And Handle 15 6 Unit Digital Weighing Scale ,30kg Capacity,stainless Tray Size: 35x23cm For 30kg Capacity Weighing Scale, Dual - Display : Weight, Unit Price, Amount, High Light Led Display, Rechargeable Battery, Power Supply: Ac/dc Charger (included) 16 47 Unit Double Burner Gas Stove; Stainless Top And Front; Automatic Ignition; Reversible Trivet; Double Detachable Top Burner; Removable Drip Pan; Dimension: 700mm(l) X 390mm(w) X 140mm(h) 17 7 Unit Double Ring Burner; Heavy-duty Cast Iron; Includes Pol Regulator And 1-metre Hose 16750 Btu Brass Valve With Individual Gas Control Minimal Assembly Required Weight; 3.9kg, Material;cast Iron, Dimensions: (lwh) 36cm X 20cm X 9cm, Fuel Type: Lpg Tank Cylinder With Content And Accessories 18 2 Pc Egg Ring, Stainless Steel, 8.5cm Diameter, 1.5cm Height 19 4 Box Face Masks; 3 Ply Non-woven Disposable Earloop Mask; Quantity: 50pcs/box 20 30 Pc Fish Drying Rack, 4-layer, 45x45x66cm, Foldable 21 6 Pc Fish Scaler, 20cm Stainless Steel 22 6 Pc Fish Scraping Tool, 20cm Stainless Steel 23 54 Unit Food Shelve, 2 Layers: Glass Thickness: 3/16 And 1/4, (w-14" X H-17" X L-30"); Adjustable Layer, Material: Glass & Aluminum With Sliding Door, Offer: Screen Sliding Door To Prevent Moisture 24 204 Pc Food Tray With Glass And Stainless Lid/cover, Stainless Body, Rubberized Stand 32x28x10cm 25 12 Pc Food Tray, Flat, Stainless, 60x40x2cm, Depth: 2cm 26 2 Unit Freezer Chest Type, Gross / Net Volume 10.6 Cu.ft. (10 Liters) / 10.1 Cu.ft. (286 Liters), Functionality 3-in-1 Function – Chilling | Freezing | Fast Freezing, Defrosting System: Manual Defrost, Evaporator:aluminum Defrost,led: 6 Led’s, P:2w, Lamp Life: Min. 50,000 Hours, Weight 40 Kg, Dimensions L 63 X W 111.4 X H 84.7 (cm), Key Features: Inverter Compressor, Sliding Glass Door, Embossed Door & Cabinet, Recessed Side Handle (left & Right), Led Light, Removable Gasket , 1x Basket Wire Shelf, 4x Roller Wheel 27 5 Pc Fruit Crate Plastic 21 X 15 X 12 Inches, Heavy Duty Plastic Material, Color : Black 28 37 Pc Frying Pan 14" In Diameter, Cast Iron 29 4 Unit Gas Range, Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h); 4-gas Burner; 62l Gas Oven; Button Ignition; Top Glass Lid; Net Weight: Maximum Of 28kg; Pan Support: Light Cast Iron Pan Support 30 1 Box Gloves; 100pcs; Food Grade; Size: Medium(7.5cm); Thermoplastic Elastomer(tpe) Material 31 23 Pc Hairnet With Cap; White; Nylon; Washable 32 1 Unit Industrial Oven Stainless Steel, With Wall Insulator To Minimize Penetration Of Heat To The Walls, With Temperature Gauge, Approx. Outer Dimension: 46.5 X 23.5 X 30 Inches; Oven Stand/rack Is Made Of Metal With Rollers And Braking Systems; Stainless Steel Front Panel, With See Thru Glass; About 4 Inch Thickness Of Walls With 2 Trays Per Deck - 4 Trays Capacity; Gas Type 33 35 Pc Kawa 62 Cm Diameter 18 Cm Height, Aluminum With 2 Aluminum Handles 34 12 Pc Kitchen Apron, Waterproof; Stain Resistant Leather Apron 35 6 Pc Kitchen Scissors, Material: Stainless Steel And Plastic Silicone, Size: 22.5x7.3x1.2cm 36 3 Pc Long Handle Stainless Steel Soup Spoon; Color: Silver; Caliber Length; Approx. 12cm.14cm.16cm.18cm, Handle Length; Approx.45cm(17.72inches) 37 6 Pc Long Wooden Ladle; 14" Stainless Steel 38 58 Set Lpg Tank, 11kg Cylinder With Gas Regulator, 1.8m Hose & Steel Hose Clamp 39 9 Set Measuring Cup (set For Liquid), 1 Measuring Cup With Red Graphics; Made Of Nonporous Glass That Won't Warp, Stain, Or Absorb Odors; Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe; Dimension: Approx. 7.13" (l) X 6.75" (w) X 4.38" (h); Measuring Capacity: 500ml 40 9 Set Measuring Cups (set For Dry), Smithcraft Stainless Steel Measuring Cups Set Have 8 Cups.the Sizes Are: 1 Cup (240ml), 3/4 Cup (180ml), 2/3 Cup (160ml), 1/2 Cup (120ml), 1/3 Cup (80ml), 1/4 Cup (60ml), 1/8 Cup (30ml), 1/16 Cup (15ml),1 Locking Ring. 41 6 Unit Mini Electric Fan 7.5" - With Base 10'' 69hz 20w (for Bbq), Non-adjustable Height; Any Color; Electric Powered Fan; 3 Blade 42 21 Pc Mixing Bowl Medium, Approx. Diameter: 28cm, Height:11.2cm; Material: Stainless; Capacity: Atleast 4l 43 200 Pc Monoblock Chair Front:monoblock Chair, Front Legs Distance: 355mm Width Seat, With Backrest, Color: Beige, Seat Width :375 Mm, Deapth: 330 Mm, Side Legs Distance Left: 378 Mm, Side Legs Distance Right 378 Mm, Back Legs Distance: 210 Mm, Back Rest Height:779 Mm, Set Back Height: 405 Mm, Seat Height: 376 Mm, Gross Weight: 2.25 Kgs 44 54 Pc Monoblock Table, 36x36 Inches, H- 28 Inches, Color: Beige, Atleast 3mm Thick 45 2 Pc Non-slip Rectangular Chopping Board; Materials:polypropylene Plastic; Approx Length: 40cm; Width: 25cm; Thickness: 0.5cm; Color : White 46 45 Pc Palamigan Container W/ Gripo 15l, Dimension: 31.8x23.8x48.5cm, Material: High Quality Durable Plastic 47 1 Unit Pressure Cooker 50 Liters Capacity, Aluminum Alloy Material, Pressure: 90kpa, Dimension: 44cm Diameter X 47cm Height 48 40 Pc Round Glass Jars With Lid, 220ml 49 41 Pc Sandok, Stainless Steel, 24.7" Length, With Wooden Handle 50 33 Pc Sandok, Stainless Steel, Length: 14" 51 39 Pc Shansi, Stainless Steel, Length: 14" 52 9 Pc Stainless Steel Dough Cutter Scraper Baking Smoother Cake , Approx. Size: 14-15cm (l) X 11.5-12cm (w) And 22cm (h); Material: Stainless Steel 53 41 Pc Stainless Steel Food Tong 14" Length 54 5 Unit Steamer; Aluminum; About 16"/42cm Diameter; 3 Layers With Cover; With Handle Per Layer 55 3 Unit Vacuum Sealer Machine, 220v, 90w, Sealing Width: 270mm, Power Supply: Ac100-240v/50-60hz, Temperature Control Range: 170-210 Celsius, Abs Material, Size: 370*75*50 (mm) 56 15 Pack Vacuum Sealer Storage Pouches | Bpa Free, Commercial Grade For Food Storage & Sous Vides, Size: 17 X 25cm Material: Plastic, 100pcs/pack 57 27 Pc Water Jug/dispenser With Faucet, 5 Gallons, 20 Liters, Color: Blue, Durable And High Quality Plastic Material 58 7 Unit Weighing Scale; Analog; 20kg Capacity; Approx. Dimensions: 6-7" (l); 8-9" (w); 10-11" (h); Dual Unit (kg And Pounds) 59 2 Pc Wide Mouth Funnel, Stainless Steel, Top Opening: At Least 17 X 5.5 X 6cm, Bottom Opening: At Least 13 X 3.7 X 4cm 60 8 Pc Wire Whisk, Large, Stainless, Approx. 14-15" (l) Lot 3 - Fabrication Of Food Cart 1 7 Unit Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Provision Of Umbrella And 2 Chest Coolers (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo, Note: With Dole, Dilp Logo Fully Painted In A Galvanized Sheet Iron Attached On The Front Of The Sidecar With Approx. 15.7 Inches(h)x15.7 Inches(l) Fully Painted Color: Any Color 2 1 Unit Motorcycle Sidecar (for Fruits And Vegetable Vending): Metal Body, Dimensions L-4ft W-2ft H-2ft, With 17inch Side Wheel 3 11 Unit Negocart With Bicycle Roofing Materials: Bolt & Nut W/ Washer 3/16 X 1 Polycarbonate 6mm X 1.2 X 1.70 Welding Rod Body Materials:tubular 1 X 1 X 1.5;flat Bar 1/8 X 1;flat Bar 2' X 3/8 X 1;plain G.i.;sheet 4' X 8' #26;cylindrical Hinge 1/2" ᴓ;blind Rivets 1/8 X 1/2;cylindrical 1/2;cabinet Handle;cabinet Lock;round Bar 8mm ᴓ;transparents Barrier 1/4 X 4' X 8';welding Rod;stainless Sheet 4' X 8';plain Round Bar 16mm ᴓ: Bicycle Specs: Bmx Type Bike Frame, Front And Rear Free Wheel Hub For Rim Set Single Speed (wheel Set), Tire Size (20"x2.125 Jumbo), Interior Tube (20"x2.125), Bmx Handle Bar, Bmx Fork, Head Parts (h Post, Handle Grip), Chain (single Speed), Pedal (bearing Type), Seat Clamp, Saddle With Spring, Foot Brake (clamp W/ Spring), Crank Pedals (175mm-180mm Cranks) Note: With Dole, Dilp Logo And Tourism Spot At The Front And Side Of Cart, Logo Material: Weather Proof Sticker, Sizes Of Sticker: H-60cm X W-130cm (for Front Of Cart) And H-60cm X W:75cm (for Side Of Cart) Or H-23.6" X W-51" And H-23.6" X W-29.5" Fully Painted Color: Light Blue Lot 4 - Grooming Tools 1 1 Pc All Purpose Comb, 7inch, Plastic Material 2 3 Pc Barber Apron, With Two Pockets, Waterproof, Material: Fiber Size: Approximately 89x69cm - 35x27.2 Inches 3 1 Pc Barber Cape, 140cmx100cm Silk, Waterproof 4 1 Unit Barber Chair, Reclining, Modern Style, Chair Back Height: High-back; Upholstery: Faux Leather; Material: Stainless Steel; Dimension: 21"x22.5"x38" 5 1 Unit Clipper, Cordless, Includes 3 Metal Clip Attachment Comb Cutting Guides, 1/16", 1/8",3/16, 6.25 Inches And Weighs 13 Oz, Equipped With A 2191 Adjustable 0000 Blade 6 2 Unit Curling Iron, 38.5cm, Tourmaline Ceramic, 25-39w, 360 Degree Rotatable 7 2 Set Eyebrow Grooming Kit, 6pcs (2 Eyebrow Razor, 1 Facial Razor, 1 Brush, 1 Scissors, 1 Tweezer) 8 1 Pc Fade Brush, Material: Plastic & Nylon, (hxw) 12.3 X 2.3 Cm, Weight: 0.015 Kg 9 2 Unit Flat Iron, Ceramic Wide Plate, 100-240v Dual Votage, 40-59w, 27.8cm Long 10 2 Unit Hair Blower, 2 Speed - 3 Heat Settings, 2400w, Removable Filter Cover, Cool Shut Function, Dimension: 21.5x8.5x26.5cm 11 1 Set Hair Clips, Plastic, Size: Approximately 7.8cm 12 2 Set Hair Dying Tool Set, (5-pc) Small Brush - 19.5cmx4.5cm, Big Brush - 20.5x6cm, Secondary Comb - 19x5.5cm, Small Bowl - 13x4.5cm, 1 Pair Of Earmuffs 8x4.5cm 13 3 Pc Hair Shear, 6.9 Inch Stainless 14 10 Pc Hair Towel Turban, 49x18cm Microfiber 15 2 Set Make Up Brush Kit, 12 Pcs With Box 16 2 Set Make Up Kit, 35pcs (1 Eyeshadow, 1 Concealer, 4 Osmetic Brush, 3 Lipgloss, 1 Eyebrow Pencil, 1 Pressed Powder, 4 Lipstick, 4 Face Makeup, 1 Lip Balm, 1 12.5cmx19cm Makeup Bag, 1 Eyebrow Cream, 1 Primer, 1 Powder Puff, 1 Mascara) 17 2 Pc Makeup Kit Organizer, 50cmx39.5cmx21.5cm, Black,046 Glittery, Checkered 18 1 Pc Mirror, Double Sided Folding Mirror, (wxh) 24x 37cm, Weight: 0.532 Kg 19 1 Pc Neck Duster, Weight : 100g , Size : 18x7x7cm 20 1 Roll Neck Strips, (28cmx6.5cm) Self Adhesive, Material: Paper 21 4 Set Plastic Hair Roller, 25mm Assorted, 10-pc Large 22 3 Pc Pomade, 80g, Water-based 23 1 Pack Razor Blades, Durable, Stainless, 100 Pcs, (lxwxh) 14x10x1 24 1 Set Shaver, Abs Material,110-220v, Power: 3w, Size: 16.6x5.8cm, Battery Capacity: 600mah 25 2 Pc Shaving Gel, 195g With Aloe 26 2 Pc Talc Powder, 500g 27 1 Set Trimmer, Rechargable, 2 Blades, Power: 50-60 Hz, Voltage:100-240v, Dimension: 11.5x6.5x3cm 28 4 Pc Wide-tooth Comb, 16cm Plastic, Durable 29 1 Pc Wide-tooth Comb, Size: Approximately 21.5x5 Cm, Plastic Material Lot 5 - Sewing 1 7 Set Ball Point Pins, 250 Pcs Per Box With 8 Colors; Durable 2 8 Unit Bobbin Case, Diameter: 20.3mm Width: 11.7mm 3 8 Pc Bobbin, Diameter: 20.3mm Width: 11.7mm 4 4 Set Dressmaker's Shears, Material: Stainless Steel; Item Dimensions: Approximately 0.8" (l) X 3.9" (w) X 10" (h); Blade Length: 8"; Item Weight: Approximately 8.8 Ounces 5 1 Pc Edging/ Overlock Sewing Machine, Metal Material; Overlocker; 1 Stitch; Dimension(lxwxh) 12x13x14 6 3 Pc Electric High Speed Sewing Machine, Power: 90w; Rated Voltage: 220v; Gross Weight: About 7kg; Max Sewing Speed: 1,100 Stiches/min; Materials: Stainless Steel Needle Plate, Metal Frame; Dimensions: Approximately 44cm (l) X 16cm (w) X 28cm (h); Voltage: 220v, Secondary Lifting Height Or Presser Foot: 14mm; Needle Pitch: From 0-4.5mm, Needle Width: From 0-7.0mm 7 4 Pc Flat Iron, 1200w; Stainless Steel Sole Plate; Power Light Indicator; With Steaming/spray Function 8 4 Set French Curve, Dimension(21.65x0.39x7.09); 4.6 Ounce; Made Of Aluminum Or Plastic 9 4 Pc L-square, Material: Stainless; Item Weight: 0.32oz; Product Dimensions: Approx. 14" (l) X 24" (w) 10 1 Pc Manual Sewing Machine With Motor And Foot Controller, Metal Material, Heavy Duty, 9kg Weight, 1 Stitch Dimensions, (lxwxh) 12x13x14 11 4 Unit Meter Stick, Yellow Color; Wood Type 12 4 Pc Needle Threader, Metal Material; Oval Shape; 1 Inch Size 13 31 Pack Sewing Machine Needle, Flat Needles 10pcs/pack 14 11 Pc Sewing Threads 12pcs/box, Material: Cotton; Package Dimensions: Approx. 5.71" (l) X 3.74" (w) X 2.36" (h); Thread Size: Approx. 56mm (h) X 22mm (w); 550 Yards Each Roll 15 25 Pc Tailor’s Chalk, Square Shape; Orange Color;fades Or Brushes Away Easily 16 4 Pc Tape Measure, Material: Durable Soft Plastic; Color: Blue; Measurements: Inches (can Measure Upto 60") And Centimetres (can Measure Upto 150cm) Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 2. Delivery Of The Goods Is Required Ninety (90) Calendar Days Delivery Period And Upon Receipt Of Notice To Proceed And Purchase. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Local Government Unit Of Mercedes, Camarines Norte-bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours - 8:00 Am-12:00 To 1:00 Pm-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 14, 2024 Until 8:30 Am Of January 6, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only Php5,000.00. 6. The Local Government Unit Of Mercedes, Camarines Norte Will Hold A Pre-bid Conference On December 23, 2024 9:00am At Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, On Or Before 8:30am January 6, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 9:00 Am Of January 6, 2025 At The Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Mercedes, Camarines Norte, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Macario B. Totanes Municipal Planning And Development Office Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0998-576-8321 Arsenia M. Ordiales Bac Secretariat Bids And Awards Committee Office 2nd Floor Jpl Sports Complex, Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0908-896-9684 Email Address: Lgubac.mercedes@yahoo.com 12. You May Visit The Website: For Downloading Of Bidding Documents: Www.mercedes.gov.ph December 13, 2024 ________________________________ Macario B. Totanes Bac Chairman

Details: Combined Synopsis/solicitation Notice combined Synopsis/solicitation Notice page 3 Of 11 combined Synopsis/solicitation Notice *= Required Field combined Synopsis/solicitation Notice page 1 Of 9 description combined Synopsis/solicitation Notice combined Synopsis/solicitation Notice page 11 Of 11 combined Synopsis/solicitation Notice *= Required Field combined Synopsis/solicitation Notice page 1 Of 10 page 1 Of this Is A Combined Synopsis/solicitation For Commercial Products Prepared In Accordance With The Format In Federal Acquisition Regulation (far) Subpart 12.6, Streamlined Procedures For Evaluation And Solicitation For Commercial Products, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested, And A Written Solicitation Document Will Not Be Issued. this Is A Brand Name Or Equal To Request For Quote (rfq), And The Solicitation Number Is 36c26025q0159. The Government Anticipates Awarding A Firm-fixed Price Supply Order From This Solicitation. this Is A Solicitation For A Smart Mattress, Base Frame, Mattress Cover, Remote And Set-up. The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular Fac 2025-02 January 3, 2025. this Solicitation Is An Unrestricted Open Market Solicitation. The Associated North American Industrial Classification System (naics) Code For This Procurement Is 337910, With A Small Business Size Standard Of 1000 Or Fewer Employees, And The Psc Is 6530. all Interested Companies Shall Provide Quotations That Are Brand Name Or Equal To Sleep Number As Follows: quantity manufacturer Part description 6 i2p5 sleep Number New P5 360 Queen Smart Mattress 60 X80 6 sleep Number New Flexfit 2 Queen Bed Base 6 424201 sleep Number Total Encasement Mattress Cover For Smart Beds Queen 6 126016 sleep Number New Smart Remote Compatible With Mattress And Frame 1 sleep Number Half Day Delivery Install Set Up standard Warranty Shall Apply To All Parts Listed. A 15 Year Warranty Is Desired. must Meet All Required Federal Mandates For Medical Use. salient Characteristics queen Smart Mattress: 60 X 80 weight Capacity: Supports Up To 550 Lb. adjustable Firmness includes Air Hoses And A Power Supply To In/deflate Mattress power Supply Compatible With A 100 240 Vac Grounded Wall Socket must Be Compatible With Adjustable Base breathable queen Bed Base: weight Capacity: Can Support A Working Load Of Mattress, Mattress Cover, System Hardware And An Additional 550 Lb adjustable To Multiple Positions, Including Supine To Upright Head Position And Varied Levels Of Foot Positions. designed For And Supports Queen Mattress includes An Electric Control System, Power Cord Connections And Cables total Encasement Mattress Cover: washable, Zippered Cover Fully Encases Mattress And Hose Openings. waterproof And Will Block Bed Bugs, Dust Mites And Allergens smart Remote: hand Control That Adjusts Firmness Of Mattress And The Position Of The Base (hardwired To The Bed Is Desired, But Not Required) compatible With Smart Frame And Mattress delivery/install Set-up: deliver And Assemble Complete Bed Packages To Va Medical Center American Lake Sleep Lab, Set Up Beds In Designated Rooms And Haul Away Packaging, Old Mattresses And Frames coordinate With Poc At Sleep Lab For Delivery Times 52.211-6â brand Name Or Equal. as Prescribed Inâ 11.107(a), Insert The Following Provision: brand Name Or Equalâ (aug 1999) (a)â if An Item In Thisâ solicitationâ is Identified As "brand Name Or Equal," The Purchase Description Reflects The Characteristics And Level Of Quality That Will Satisfy The Government S Needs. The Salient Physical, Functional, Or Performance Characteristics That "equal"â productsâ mustâ meet Are Specified In Theâ solicitation. (b)â to Be Considered For Award,â offersâ of "equal"â products, Including "equal"â productsâ of The Brand Name Manufacturer,â must- (1)â meet The Salient Physical, Functional, Or Performance Characteristic Specified In Thisâ solicitation; (2)â clearly Identify The Item By- (i)â brand Name, If Any; And (ii)â make Or Model Number; (3)â includeâ descriptive Literatureâ such As Illustrations, Drawings, Or A Clear Reference To Previously Furnished Descriptive Data Or Information Available To Theâ contracting Officer; And (4)â clearly Describe Any Modifications Theâ offerorâ plans To Make In A Product To Make It Conform To Theâ solicitationâ requirements. Mark Any Descriptive Material To Clearly Show The Modifications. (c)â theâ contracting Officerâ will Evaluate "equal"â productsâ on The Basis Of Information Furnished By Theâ offerorâ or Identified In Theâ offerâ and Reasonably Available To Theâ contracting Officer. Theâ contracting Officerâ is Not Responsible For Locating Or Obtaining Any Information Not Identified In Theâ offer. (d)â unless Theâ offerorâ clearly Indicates In Itsâ offerâ that The Product Being Offered Is An "equal" Product, Theâ offerorâ shallâ provide The Brand Name Product Referenced In Theâ solicitation. (end Of Provision) delivery Fob Destination Is Preferred, 30-60 Days After Receipt Of Order. All Deliveries Will Be Coordinated With The Puget Sound Va Medical Center Point Of Contact. place Of Delivery: department Of Veterans Affairs va Puget Sound american Lake Medical Center 9600 Veterans Dr. tacoma, Wa 98493 . the 6 Rooms Within The Sleep Lab Located At The American Lake Campus: Room Numbers Are 301,303,304,305,306,307. the Full Text Of Far Provisions Or Clauses May Be Accessed Electronically At Http://acquisition.gov/comp/far/index.html http://www.va.gov/oal/library/vaar/index.asp the Following Solicitation Provisions Apply To This Acquisition: far 52.212-1, Instructions To Offerors Commercial Products addendum To Far 52.212-1 Instructions To Offerors Commercial 52.204-7 system For Award Management (oct 2018) 52.204-16 commercial And Government Entity Code Reporting (aug 2020) 52.204-24 representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment (nov 2021) 52.211-6 brand Name Or Equal (aug 1999) 52.212-3 offeror Representations And Certifications-commercial Products And Commercial Services (may 2024) 52.225-2 buy American Certificate (oct 2022) 52.252-1 provisions Incorporated By Reference (feb 1998) vaar Provisions: 852.239-75 information And Communication Technology Accessibility Notice (feb 2023) (a) Gray Market Items Are Original Equipment Manufacturers (oem) Goods Sold Through Unauthorized Channels In Direct Competition With Authorized Distributors. This Procurement Is For New Oem Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment (i.e., Replacement Parts) For Va Medical Centers. No Remanufactures Or Gray Market Items Will Be Acceptable. (b) Offeror Shall Be An Oem, Authorized Dealer, Authorized Distributor Or Authorized Reseller For The Proposed Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment (i.e., Replacement Parts), Verified By An Authorization Letter Or Other Documents From The Oem, Such That The Oem S Warranty And Service Are Provided And Maintained By The Oem. All Software Licensing, Warranty And Service Associated With The Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment Shall Be In Accordance With The Oem Terms And Conditions. (c) The Delivery Of Gray Market Items To The Va In The Fulfillment Of An Order/award Constitutes A Breach Of Contract. Accordingly, The Va Reserves The Right Enforce Any Of Its Contractual Remedies. This Includes Termination Of The Contract Or, Solely At The Va S Election, Allowing The Vendor To Replace, At No Cost To The Government, Any Remanufactured Or Gray Market Item(s) Delivered To A Va Medical Facility Upon Discovery Of Such Items. (d) Any Award Made As A Result Of This Solicitation Will Be Made On An All Or Nothing Basis. (e) Offerors Are Warned Against Contacting Any Va Personnel Other Than The Contracting Officer And Contract Specialist Prior To Placement Of Any Award Made Resulting From This Rfq. If Such Contact Occurs And Found To Be Prejudicial To Competing Contractors, The Offeror Making Such Contact May Be Excluded From Award Considerations. (f) All Proprietary Information Shall Be Clearly And Properly Marked. If The Offeror Submits Annexes, Documentation, Attachments, Or The Like, Not Specifically Required By This Solicitation, Such Will Count Against The Offeror S Page Limitations Unless Otherwise Indicated In The Specific Volume Instructions Below. (g) All Information Shall Be Confined To The Appropriate File. The Offeror Shall Confine Submissions To Essential Matters, Sufficient To Define The Quote And Provide An Adequate Basis For Evaluation. Offerors Are Responsible For Including Sufficient Details, In A Concise Manner, To Permit A Complete And Accurate Evaluation Of Each Quote. (end Of Addendum To 52.212-1) far 52.212-2, Evaluation-commercial Items : The Government May Award A Contract Resulting From This Solicitation To The Responsible Offeror Whose Offer Conforming To The Solicitation Will Be Most Advantageous To The Government, Price And Other Factors Considered. In Accordance With Far 9.104-2, The Special Standards Of Responsibility Described Below Apply To This Procurement. Offerors Who Fail To Meet Any Special Standards Of Responsibility Will Not Be Eligible To Receive Contract Award. The Following Factors Shall Be Used To Evaluate Offers: special Standards Of Responsibility: (per Far 9.104-2) The Following Special Standards Of Responsibility Apply To This Procurement: sp1: Offeror Must Be A Manufacturer Authorized Provider For The Items Provided. A Letter From The Manufacturer Stating Such Must Be Included With Any Response To This Solicitation. price (a) A Written Notice Of Award Or Acceptance Of An Offer, Mailed Or Otherwise Furnished To The Successful Offeror Within The Time For Acceptance Specified In The Offer, Shall Result In A Binding Contract Without Further Action By Either Party. Before The Offeror's Specified Expiration Time, The Government May Accept An Offer (or Part Of An Offer), Whether Or Not There Are Negotiations After Its Receipt, Unless A Written Notice Of Withdrawal Is Received Before Award. far 52.213-3 Offerors Are Advised To Include A Completed Copy Of The Provision At 52.212-3, Offeror Representations And Certifications -- Commercial Items, With Its Offer If Has Not Been Completed On Sam.gov. Offerors Must Complete Annual Representations And Certifications Electronically Via The System For Award Management (sam) Website Located At Https://www.sam.gov/portal In Accordance With Far 52.212-3, Offerors Representations And Certifications Commercial Items. If Paragraph (j) Of The Provision Is Applicable, A Written Submission Is Required. all Service-disabled Veteran Owned Businesses Or Veteran Owned Businesses Must Be Registered/certified With The U.s Small Business Administration At Veteran Small Business Certification Veteran Small Business Certification (sba.gov). the Following Contract Clauses Apply To This Acquisition: far 52.212-4, Contract Terms And Conditions Commercial Products (oct 2018) addendum To Far 52.212-4 The Following Clauses Are Included As A Part Of The Addendum: http://www.acquisition.gov/far/index.html (far) http://www.va.gov/oal/library/vaar/index.asp (vaar) 52.203-17 contractor Employee Whistleblower Rights (nov 2023) 52.204-13 system For Award Management Maintenance (oct 2018) 52.204-18 commercial And Government Entity Code Maintenance (aug 2020) 52.219-6 notice Of Total Small Business Set-aside (nov 2020) (15 U.s.c. 644) 52.225-1 (buy American Supplies) 52.232-40 providing Accelerated Payments To Small Business Subcontractors (dec 2013) 52.233-3 protest After Award (aug 1996) (31 U.s.c. 3553). 52.252-2 clauses Incorporated By Reference (feb 1998) vaar Clauses: 852.203-70 commercial Advertising (may 2018) 852.212-71 gray Market Items (nov 2018) 852.232-72 electronic Submission Of Payment Requests (nov 2018) 852.239-76 information And Communication Technology Accessibility (feb 2023) 852.242-71 administrative Contracting Officer (oct 2020) 852.246-71 rejected Goods (oct 2018) 852.247-73 packing For Domestic Shipment (oct 2018) far 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders Commercial Products (mar 2023) the Following Subparagraphs Of Far 52.212-5 Are Applicable And Incorporated By Reference: 52.204-10 52.204-27 reporting Executive Compensation & First-tier Subcontract Awards (jun 2020) (pub. L. 109-282) (31 U.s.c. 6101 Note) prohibition On A Bytedance Covered Application (jun 2023) (section 102 Of Division R Of Pub. L. 117-328) 52.209-6 protecting The Government S Interest When Subcontracting With Contractors Debarred, Suspended, Or Proposed For Debarment (nov 2021) (31 U.s.c. 6101 Note) 52.219-6 notice Of Total Small Business Set-aside (nov 2020) (15 U.s.c. 644). 52.219-28 52.219-27 post Award Small Business Program Representation (mar 2023) (15 U.s.c 632(a)(2)) notice Of Service-disabled Veteran-owned Small Business Set-aside (oct 2022) 52.222-3 52.222-19 convict Labor (jun 2003) (e.o. 11755) child Labor Cooperation With Authorities And Remedies (feb 2024) (e.o. 13126) 52.222-21 prohibition Of Segregated Facilities (apr 2015) 52.222-26 equal Opportunity (sep 2016) (e.o. 11246) 52.222-36 equal Opportunity For Workers With Disabilities (jun 2020) (29 U.s.c. 793) 52.222-50 combating Trafficking In Persons (nov 2021) (22 U.s.c. Chapter 78 And E.o. 13627) 52.223-18 encouraging Contractor Policies To Ban Text Messaging While Driving (jun 2020) (e.o. 13513) 52.225-1 buy American-supplies (oct 2022) (41 U.s.c. Chapter 83) 52.225-13 restrictions On Certain Foreign Purchases (feb 2021) (e.o.'s, Proclamations, And Statutes Administered By The Office Of Foreign Assets Control Of The Department Of The Treasury) 52.226-8 encouraging Contractor Policies To Ban Text Messaging While Drivingâ (mayâ 2024)â  52.232-33 payment By Electronic Funds Transfer System For Award Management (jul 2018) (31 U.s.c. 3332) 52.240-1 prohibition On Unmanned Aircraft Systems Manufactured Or Assembled By American Security Drone Act-covered Foreign Entities (nov 2024) (sections 1821-1826, Pub. L. 118-31, 41 U.s.c. 3901 Note Prec.) all Quoters Shall Submit According To The Following: quotes Must Be Emailed To Rachel.richardson@va.gov And Received No Later Than 3:00 Pm Pst On 01/08/2025. Quotes May Be Submitted On This Document Or The Vendor S Own Form And Must Include, If Not The Manufacturer, An Authorized Distributor Letter, And A Completed Buy American Certificate. Any Offer That Does Not Provide The Supporting Documentation May Be Considered Non-responsive. Required Supporting Documentation And Information: authorized Distributor Letter If Not The Manufacturer completed Buy American Certificate certification That Equipment Meets/exceeds The Salient Characteristics Of The Desired Brand Above delivery Date warranty Details the Government Intends To Make Award Without Discussions. for Information Regarding The Solicitation, Please Contact Rachel Richardson At Rachel.richardson@va.gov. (end Of Provision) mandatory Electronic Invoicing va Published The Final Rule Requiring Vendors To Submit Invoices Electronically To The Financial Services Center (fsc) In The November 27, 2012 Federal Register. The Rule Became Effective December27,2012.the Rule Includes A New Contract Clause To Be Inserted In All Solicitations And Contracts By The Contracting Officer (vaar 852.232-72). Vendors Can Comply With The Rule By Using Either Of The Two Methods Below: facsimile, E-mail, And Scanned Documents Are Not Acceptable Forms Of Submission For Payment Requests. Electronic Form Means An Automated System Transmitting Information Electronically According To The Accepted Electronic Data Transmission Methods Below: va S Electronic Invoice Presentment And Payment System The Fsc Uses A Third-party Contractor, Tungsten, To Transition Vendors From Paper To Electronic Invoice Submission. Please Go To This Website:http://www.tungsten-network.com/us/en/veterans-affairs/to Begin Submitting Electronic Invoices, Free Of Charge. a System That Conforms To The X12 Electronic Data Interchange (edi) Formats Established Bythe Accredited Standards Center (asc) Chartered By The American National Standards Institute (ansi). The X12 Edi Web Site (http://www.x12.org). vendor E-invoice Set-up Information: please Contact Tungsten At The Phone Number Or Email Address Listed Below To Begin Submitting Your Electronic Invoices To The Va Financial Services Center For Payment Processing, Free Of Charge. If You Have Question About The E-invoicing Program Or Tungsten, Please Contact The Fsc At The Phone Number Or Email Address Listed Below: tungstene-invoicesetupinformation:1-877-489-6135 tungstene-invoiceemail:va.registration@tungsten-network.com fsce-invoicecontactinformation:1-877-353-9791 fsce-invoiceemail:vafsccshd@va.gov