Waterproofing Tenders

Details: Description Part I Other General Requirements B.3(1) Permits And Clearances L.s. 1.00 B.5(1) Project Billboard/signboard Each 2.00 B.7(1) Occupational Safety And Health Program L.s. 1.00 Total Cost (part I) Carried To Summary Php Part Ii Civil, Mechanical, Electrical And Sanitary/plumbing Works Part A Earthworks 800(2) Clearing And Grubbing L.s. 1.00 803(1)a Structure Excavation (common Soil) Cu.m. 71.22 804(1)a Embankment From Roadway/structure Excavation (common Soil) Cu.m. 44.25 804(2)a Embankment From Borrow (common Soil) Cu.m. 16.64 804(7) Gravel Fill Cu.m. 15.08 Total Cost (part A) Carried To Summary Php Part B Plain And Reinforced Concrete Works 900(1)i Structural Concrete (class A, 28days) Cu.m. 65.38 902(1)a1 Reinforcing Steel (deformed)(grade 40) Kg 15,740.58 903(2) Formworks And Falseworks Sq.m. 409.93 Total Cost (part C) Carried To Summary Php Part C Finishing And Other Civil Works 1046(2)a1 Chb Non-load Bearing (including Reinforcing Steel)(100mm) Sq.m. 326.95 1010(2)b Doors (wood Panel) Sq.m. 5.25 1043(1) Pvc Doors And Frames Sq.m. 2.52 1007(1)b Aluminum Framed Glass Door (swing Type) Sq.m. 11.76 1005(1) Residential Casement (steel) Sq.m. 6.30 1008(1)c Aluminum Glass Windows (awning Type) 1.08 Sq.m. 1003(17) Carpentry And Joinery Works (doors Jambs) L.s. 1.00 1004(2) Finishing Hardware (lockset & Hinges) L.s. 1.00 1051(1)a Railing L.s. 1.00 1021(1)c Cement Floor Finish(with Floor Hardener) Sq.m. 10.00 1027(1) Cement Plaster Finish Sq.m. 602.14 1016(1)a Waterproofing(cement-base) Sq.m. 133.82 1003(1)a1 Ceiling (4.5mm, Metal Frame, Fiber Cement Board) Sq.m. 199.28 1018(1) Glazed Tiles And Trims Sq.m. 27.59 1018(2) Unglazed Tiles Sq.m. 145.60 1032(1)a Painting Works(masonry/concrete) Sq.m. 968.19 1032(1)b Painting Works (wood) Sq.m. 20.27 1032(1)c Painting Works (steel) Sq.m. 211.81 1014(1)a2 Pre-painted Metal Sheets(above 0.427mm, Corrugated, Long Span) Sq.m. 113.76 1013(2)a Fabricated Metal Roofing Accessory (gauge 26(0.551mm), Ridge/hip Rolls) L.m. 15.80 1013(2)b Fabricated Metal Roofing Accessory (gauge 26(0.551mm), Flashing) L.m. 14.40 1047(8)a Structural Steel (trusses) Kg 2,152.48 1047(8)b Structural Steel (purlins) Kg 1,281.42 1047(5)a Metal Structure Accessories (bolts And Rods) Kg 5.68 1047(5)d Metal Structure Accessories (steel Plates) Kg. 101.74 1047(5)b Metal Structure Accessories (sagrods) Kg 23.43 1001(8) Sewer Lines Works L.s. 1.00 1001(9) Storm Drainage And Downspout L.s. 1.00 1002(4) Plumbing Fixtures L.s. 1.00 1002(24) Cold Water Lines L.s. 1.00 1001(6) Catch Basin L.s. 1.00 Total Cost (part C) Carried To Summary Php Part D Electrical 1100(10) Conduits, Boxes & Fittings(conduit Works/conduit Rough-in) L.s. 1.00 1101(33) Wires And Wiring Devices L.s. 1.00 1102(1) Panelboard With Main & Branch Breakers L.s. 1.00 1103(1) Lighting Fixtures L.s. 1.00 Total Cost (part D) Carried To Summary Php Part E Mechanical 1200(1) Ventilating Equipment L.s. 1.00 Total Cost (part E) Carried To Summary Php

Details: Description Part I Other General Requirements B.3(1) Permits And Clearances L.s. 1.00 B.5(1) Project Billboard/signboard Each 2.00 B.7(1) Occupational Safety And Health Program L.s. 1.00 Total Cost (part I) Carried To Summary Php Part Ii Civil, Mechanical, Electrical And Sanitary/plumbing Works Part A Earthworks 800(2) Clearing And Grubbing L.s. 1.00 803(1)a Structure Excavation (common Soil) Cu.m. 71.22 804(1)a Embankment From Roadway/structure Excavation (common Soil) Cu.m. 44.25 804(2)a Embankment From Borrow (common Soil) Cu.m. 16.64 804(7) Gravel Fill Cu.m. 15.08 Total Cost (part A) Carried To Summary Php Part B Plain And Reinforced Concrete Works 900(1)i Structural Concrete (class A, 28days) Cu.m. 65.38 902(1)a1 Reinforcing Steel (deformed)(grade 40) Kg 15,740.58 903(2) Formworks And Falseworks Sq.m. 407.68 Total Cost (part C) Carried To Summary Php Part C Finishing And Other Civil Works 1046(2)a1 Chb Non-load Bearing (including Reinforcing Steel)(100mm) Sq.m. 326.95 1010(2)b Doors (wood Panel) Sq.m. 5.25 1043(1) Pvc Doors And Frames Sq.m. 2.52 1007(1)b Aluminum Framed Glass Door (swing Type) Sq.m. 11.76 1005(1) Residential Casement (steel) Sq.m. 6.30 1008(1)c Aluminum Glass Windows (awning Type) 1.08 Sq.m. 1003(17) Carpentry And Joinery Works (doors Jambs) L.s. 1.00 1004(2) Finishing Hardware (lockset & Hinges) L.s. 1.00 1051(1)a Railing L.s. 1.00 1021(1)c Cement Floor Finish (with Floor Hardener) Sq.m. 70.40 1027(1) Cement Plaster Finish Sq.m. 602.14 1016(1)a Waterproofing(cement-base) Sq.m. 133.82 1003(1)a1 Ceiling (4.5mm, Metal Frame, Fiber Cement Board) Sq.m. 199.28 1018(1) Glazed Tiles And Trims Sq.m. 27.59 1018(2) Unglazed Tiles Sq.m. 97.20 1032(1)a Painting Works(masonry/concrete) Sq.m. 968.19 1032(1)b Painting Works (wood) Sq.m. 20.27 1032(1)c Painting Works (steel) Sq.m. 211.81 1014(1)a2 Pre-painted Metal Sheets(above 0.427mm, Corrugated, Long Span) Sq.m. 113.76 1013(2)a Fabricated Metal Roofing Accessory (gauge 26(0.551mm), Ridge/hip Rolls) L.m. 15.80 1013(2)b Fabricated Metal Roofing Accessory (gauge 26(0.551mm), Flashing) L.m. 14.40 1047(8)a Structural Steel (trusses) Kg 2,152.48 1047(8)b Structural Steel (purlins) Kg 1,281.42 1047(5)a Metal Structure Accessories (bolts And Rods) Kg 5.68 1047(5)d Metal Structure Accessories (steel Plates) Kg. 101.74 1047(5)b Metal Structure Accessories (sagrods) Kg 23.43 1001(8) Sewer Lines Works L.s. 1.00 1001(9) Storm Drainage And Downspout L.s. 1.00 1002(4) Plumbing Fixtures L.s. 1.00 1002(24) Cold Water Lines L.s. 1.00 1001(6) Catch Basin L.s. 1.00 Total Cost (part C) Carried To Summary Php Part D Electrical 1100(10) Conduits, Boxes & Fittings(conduit Works/conduit Rough-in) L.s. 1.00 1101(33) Wires And Wiring Devices L.s. 1.00 1102(1) Panelboard With Main & Branch Breakers L.s. 1.00 1103(1) Lighting Fixtures L.s. 1.00 Total Cost (part D) Carried To Summary Php Part E Mechanical 1200(1) Ventilating Equipment L.s. 1.00 Total Cost (part E) Carried To Summary Php

Details: Description Part I Other General Requirements B.3(1) Permits And Clearances L.s. 1.00 B.5(1) Project Billboard/signboard Each 2.00 B.7(1) Occupational Safety And Health Program L.s. 1.00 Total Cost (part I) Carried To Summary Php Part Ii Civil, Mechanical, Electrical And Sanitary/plumbing Works Part A Earthworks 800(2) Clearing And Grubbing L.s. 1.00 803(1)a Structure Excavation (common Soil) Cu.m. 71.22 804(1)a Embankment From Roadway/structure Excavation (common Soil) Cu.m. 44.25 804(2)a Embankment From Borrow (common Soil) Cu.m. 16.64 804(7) Gravel Fill Cu.m. 15.08 Total Cost (part A) Carried To Summary Php Part B Plain And Reinforced Concrete Works 900(1)i Structural Concrete (class A, 28days) Cu.m. 65.38 902(1)a1 Reinforcing Steel (deformed)(grade 40) Kg 15,740.58 903(2) Formworks And Falseworks Sq.m. 408.17 Total Cost (part C) Carried To Summary Php Part C Finishing And Other Civil Works 1046(2)a1 Chb Non-load Bearing (including Reinforcing Steel)(100mm) Sq.m. 326.95 1010(2)b Doors (wood Panel) Sq.m. 5.25 1043(1) Pvc Doors And Frames Sq.m. 2.52 1007(1)b Aluminum Framed Glass Door (swing Type) Sq.m. 11.76 1005(1) Residential Casement (steel) Sq.m. 6.30 1008(1)c Aluminum Glass Windows (awning Type) 1.08 Sq.m. 1003(17) Carpentry And Joinery Works (doors Jambs) L.s. 1.00 1004(2) Finishing Hardware (lockset & Hinges) L.s. 1.00 1051(1)a Railing L.s. 1.00 1027(1) Cement Plaster Finish Sq.m. 602.14 1016(1)a Waterproofing(cement-base) Sq.m. 133.82 1003(1)a1 Ceiling (4.5mm, Metal Frame, Fiber Cement Board) Sq.m. 199.28 1018(1) Glazed Tiles And Trims Sq.m. 27.59 1018(2) Unglazed Tiles Sq.m. 155.60 1032(1)a Painting Works(masonry/concrete) Sq.m. 968.19 1032(1)b Painting Works (wood) Sq.m. 20.27 1032(1)c Painting Works (steel) Sq.m. 211.81 1014(1)a2 Pre-painted Metal Sheets(above 0.427mm, Corrugated, Long Span) Sq.m. 113.76 1013(2)a Fabricated Metal Roofing Accessory (gauge 26(0.551mm), Ridge/hip Rolls) L.m. 15.80 1013(2)b Fabricated Metal Roofing Accessory (gauge 26(0.551mm), Flashing) L.m. 14.40 1047(8)a Structural Steel (trusses) Kg 2,152.48 1047(8)b Structural Steel (purlins) Kg 1,281.42 1047(5)a Metal Structure Accessories (bolts And Rods) Kg 5.68 1047(5)d Metal Structure Accessories (steel Plates) Kg. 101.74 1047(5)b Metal Structure Accessories (sagrods) Kg 23.43 1001(8) Sewer Lines Works L.s. 1.00 1001(9) Storm Drainage And Downspout L.s. 1.00 1002(4) Plumbing Fixtures L.s. 1.00 1002(24) Cold Water Lines L.s. 1.00 1001(6) Catch Basin L.s. 1.00 Total Cost (part C) Carried To Summary Php Part D Electrical 1100(10) Conduits, Boxes & Fittings(conduit Works/conduit Rough-in) L.s. 1.00 1101(33) Wires And Wiring Devices L.s. 1.00 1102(1) Panelboard With Main & Branch Breakers L.s. 1.00 1103(1) Lighting Fixtures L.s. 1.00 Total Cost (part D) Carried To Summary Php Part E Mechanical 1200(1) Ventilating Equipment L.s. 1.00 Total Cost (part E) Carried To Summary Php

Details: Description Wpfo-2025-01-84; Supply And Delivery Of Agricultural Supplies And Equipment For The Implementation Of Dilp Project Re: "retail Of Agricultural Supplies Project"- Green Boulevard Movement -bugallon Items: "rice Seeds 40kl/sack Variety: 160; 40 Kls/sack" "urea 46-0-0 (n-p-k) 1 Sack/50kg" "14-14-14 (n-p-k)/ 50kg" "ammonium Sulfate 21-0-0+24 (n-p-k+s)/ 50kg" "insecticide 1 Bottle = 1 Liter" "insecticide 1 Bottle = ½ Liter" "pesticide 1 Bottle = 1 Liter" "pesticide 1 Bottle = ½ Liter" "molluscicide 1box=10sachet" "herbicide 1bottle=1liter" "herbicide 1 Bottle = ½ Liter" "knapsack Sprayer (stainless) 18 Liters/11kg" "knapsack Sprayer (stainless) 16 Liters/9.6kg" "grass Cutter 4 Strokes; Heavy Duty" "water Pump (diesel Engine) 7 Hp, Heavy Duty" "shovel Steel Handle; Durable, Us Tempered" "harvest Sickle Stainless Steel; 30cm Plastic Handle " "sickle (tabas) 13 Inches Blade Actual 22 Inches; Heavy Duty" "boots Adult-sized; Over-the-knee; Rubber; Waterproof" "agricultural Gloves Heavy Duty Cut Resistance" "plastic Watering Pail Capacity;10 Liters" "buri Hat Farmer Buri Hat Native" "fan Belt (tractor) Tractor B Type" "lubricant/gear Oil (tractor) Small, 100 Ml"

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 24b00135 (re-avertisement) : Doh - Fy 2024 Health Care Facilities Enhancement Program (hfep): Other Health Care Facilities - Military Hospital Camp Melchor F. Dela Cruz Station Hospital 1. The Dpwh Regional Office Ii, Through The Ra 11975 (gaa Fy 2024) Intends To Apply The Sum Of ₱9,950,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 24b00135: Doh - Fy 2024 Health Care Facilities Enhancement Program (hfep): Other Health Care Facilities - Military Hospital Camp Melchor F. Dela Cruz Station Hospital. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Doh - Fy 2024 Health Care Facilities Enhancement Program (hfep): Other Health Care Facilities - Military Hospital Camp Melchor F. Dela Cruz Station Hospital Contract Id No. : 24b00135 Location : Barangay Upi, Gamu, Isabela Brief Project Description : Construction Of Camp Melchor F. Dela Cruz Station Hospital: Structural Works (removal Of Trees, Excavation, Embankment, Grave Fill, Steel Works, Structural Concrete, Plumbing Works (construction Of Catch Basin And Septic Tank, Installation Of Sewer Line Works, Waterline Works, And Storm Drainage), Finishing Works (masonry, Plastering, Painting Works, Ceiling Works, Waterproofing, Tile Works, Stainless Steel Railing, Doors And Windows) Scope Of Works : Other General Requirements • Permits And Clearances • Project Billboard / Signboard • Occupational Safety And Health Program • Mobilization / Demobilization Earthworks • Trees (furnishing And Transplanting) • Individual Removal Of Trees 150 Mm - 300 Mm Dia. • Structure Excavation (common Soil) • Embankment (from Structure Excavation & Borrow) • Gravel Fill Plain And Reinforced Concrete Works • Structural Concrete, 3000 Psi, Class A, 28 Days • Reinforcing Steel (deformed) Grade (40 & 60) • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Catch Basin • Sewer Line Works • Storm Drainage And Downspout • Septic Vault (chb/ Concrete) • Sanitary/plumbing Fixtures • Cold Water Lines • Ceiling • Carpentry And Joinery Works • Finishing Hardware • Aluminum Framed Glass Doors (swing Type) • Aluminum Glass Windows, (sliding, Awning & Fixed) Type • Doors, (wood Panel) • Fabricated Metal Roofing Accessory, 0.60 Mm, (flashing) • Fabricated Metal Roofing Accessory, Gauge 24 (0.701 Mm), Gutters • Prepainted Metal Sheets (rib Type, Long Span,0.6mm Thk) • Waterproofing Cement-base • Unglazed Tiles • Granite Tiles • Vinyl Tiles (anti-bacterial) • Floor Finishes • Non -slip Finish • Cement Plaster Finish • Painting Works, (masonry/concrete & Steel) • Reflective Insulation • Pvc Doors And Frames • Chb Non-load Bearing (including Reinforcing Steel) (100 Mm & 150mm) • Metal Structure Accessories, (turnbuckle, Bolts And Rods, Sagrods, Cross Bracing & Steel Plates) • Structural Steel • Structural Steel Purlins • Stainless Steel Railing Electrical Works • Conduits, Boxes & Fittings (conduit Works/conduit Rough-in) • Wires And Wiring Devices • Panelboard With Main & Branch Breakers • Generator Single Or Three Phase Stand-by • Lighting Fixtures • Pole Mounted Power Transformer (oisc) With Complete Accessories, Single Or Three Phase, Pole Type Or Flatform • Reinforced Concrete Pedestal / Pole Mechanical Works • Ventilating System • Fire Alarm System Approved Budget For The Contract (abc) : ₱9,950,000.00 Contract Duration : 99 Calendar Days Inclusive Of 8 Unworkable/rainy Days, 20 Sundays And Holidays 2. The Major Category Of Work For The Project Is Bicwoplc - Buildings: Construction-without Piles-low Rise-concrete Frame(1 To 5 Storey ). 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Small B. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 09 - 30, 2025, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Ten Thousand Pesos Only (₱10,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On January 16, 2025, 10:00 Am At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before January 30, 2025 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On January 30, 2025, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: January 09-15, 2025 Conspicuous Place (procurement Bulletin Board): January 09-15, 2025

Details: Description Particulars: 6 Pcs Diving Gears (set) •dive Bags For Dive Gears •bcd (backplate 3 Sets) And Jacket Type 3 Sets ) •weight Belts •weights/led For Bcd (5 Pcs For 3 Sets) •regulators •masks •snorkel •fins •wetsuit •air Tanks •booties •dive Flag •dive Buoy •banger •diving Torch/underwater Flashlight 3 Pcs Underwater Camera With Complete Accessories (filter, Bags And Case) Specifications: 120mp Hi-speed Image Sensor For Improved Low Light Performance And Noise Reduction Dual Quad Core Truepic™ Viii Image Processor F2.0 High Speed Lens 4k And High Speed Video Field Sensor System W/ Gps, Manometer, Compass & Temperature Sensor Waterproof, Shockproof, Freezeproof, Crushproof Dimension: W: 4.43 In H: 2.6 In D: 1.23 In / W: 113 Mm H: 66 Mm D: 31.9 Mm Weight: Approx. 250 G 2 Pcs Underwater Camera With Complete Accessories (filter, Bags And Case) Specifications: 120 Megapixel Full-frame Cmos Sensor 4k/120p Recording Capability 5-axis In-body Image Stabilization New Dynamic Active Steady Shot Stabilization 15 Stops Of Dynamic Range S-log3, S-gamut3, S-cinetone Recording And Built-in User Luts 10-bit 4:2:2 Internal Recording Ai Autofocus Processor With Af Subject Tracking Ai Autoframing For People Made From Recycled Materials No Mechanical Shutter (for Photography) Low Light Autofocus Down To -6 Ev Size: 121 X 72 X 52mm Weight: 1.1 Lbs 2 Pcs Underwater Camera With Complete Accessories (with Case And Stick) Specifications: Dimensions 2.0 By 2.8 By 1.3 Inches Weight 5.6 Oz Type Action Camera Sensor Resolution 27 Mp Sensor Type Cmos Sensor Size Type 1/1.9 Memory Card Slots 1 Memory Card Format Microsdxc Battery Type Gopro Enduro (1,900mah) Minimum Iso 100 Maximum Iso 6400 Stabilization Digital Display Size 2.3 Inches Touch Screen Connectivity Wi-fi, Bluetooth, Usb-c Maximum Waterproof Depth 33 Feet Video Resolution 5.3k Hdmi Output None Flat Profile 5 Pcs Dive Computer Specifications: Lens Material Sapphire Crystal Bezel Material Stainless Steel Case Material Fiber-reinforced Polymer Quickfit Watch Band Compatible (20 Mm) Strap Material Silicone Physical Size 43 X 43 X 14.15 Mm Color Display Display Size 1.2” (30.4 Mm) Diameter Display Resolution 240 X 240 Pixels Display Type Sunlight-visible, Transflective Memory-in-pixel (mip) Weight Silicone Band: 60 G Case Only: 41 G Battery Life Smartwatch: Up To 7 Days Memory/history: 32 Gb 1 Pcs Portable Heavy Duty Dive Compressor Twin Valve 5 Pcs Laptop With Windows Operating System And Complete Accessories Specifications: Strix G15 G513qr-hf343w(eclipse Gray) - Amd Ryzen 7 5800h (8-core/16-thread, 20mb Cache, Up To 4.4 Ghz Max Boost Processor | 16gb Ddr4 Memory | 1tb Pcie 3.0 Nvme M.2 Ssd | 15.6"" Fhd 1920x1080 300hz | Nvidia Geforce Rtx3070 8gb Vram | 802.11ax Wifi + Bt | Windows 11 4 Pcs Gps Specifications: Advanced Gps Handheld Touchscreen Unit Battery: Up To 18 Hours Of Battery Life In Gps Mode. Also Can Be Powered With Traditional Aa Batteries Dimensions: 8.76cm X 18.30cm X 3.27cm Display Size: 6.48cm X 10.80cm (5” Diagonal) Display Resolution: 480 X 800 Pixels Display Type: Wvga Transflective, Dual Orientation Weight: 397g With Included Lithium-ion Battery Pack Battery Life: Gps Mode – Up To 18 Hours | Expedition Mode: Up To 330 Hours Water Rating: Ipx7 High-sensitivity Receiver Interface: High Speed Micro Usb And Nmea 0183 Compatible Memory: 32gb (user Space Varies Based On Included Mapping) 10 Pcs Fiber Transect Tape (50m) 10 Pcs Underwater Slates (notebook Size) With Pencil And Carabiner 1 Pcs First Aid Kit (including Medical Oxygen Regulator And Tank) With Bag 1 Pcs Specialize Toolkit For Scuba Equipment Set 1 Pcs Repair Kit (silicon Spray, Silicone Grease, O-ring, Mouth Piece, Fins Strap And Etc.) 6 Pcs Crates For Diving Equipment's 2 Pcs Waterproof Pelican Case For Camera And Projector Specifications: Trolley Wheel Bag Exterior :23 X 14 X 11.50 Inches Interior : 20.08x 11.42x 9.45inches Including :wavefoam And Pluck Foam"

Details: Description Please Quote Your Best Price Supply And Delivery Of Advocacy Jacket Abc: Php 182,500.00 Detailed Technical Specifications: Item No.1 Jacket (48 Pcs X P 2,500/pc) Reversible Color: Navy Blue Fabric: Waterproof And Breathable Hyvent 2l Shell Fabric Allows Sweaty Vapor To Escape From Within, And Shrughs Off Heinous Weather On The Outside. Description: With Embroidered Valenzuela City Logo With Diameter Of 2” And With Zipper In Front With City Health Office Text At The Back (embroidered Too) 5” In Height Sizes: S - 2 M – 12 L – 15 Xl – 15 Xxl – 3 Xxxl -1 Delivery Place: Tala Warehouse Delivery Date: 15 -35 Calendar Days Upon Receipt Of Approved Sample. Item No. 2 Advocacy Jacket (25 Pcs X P2,500.00/pc) Color: Black And Gray Fabric: Wataerproof And Breathable Hyvent 2l Shell Fabric Allows Sweaty Vapor To Escape From Within, And Shrughs Off Heinous Weather On The Outside. Description: Embroidered Marikina City Health Office Logo On Gray Colored (side) Jacket; Logo Diameter – 2 Inches In Diameter, Button On Sleeves, Zipper In Front Sizes: S-2 M-2 L-7 Xl-8 2xl- 6 Delivery Place: Pasig Warehouse Delivery Date: 30 To 60 Calendar Days Upon Receipt Of Approved Sample. Please Download The Attached Request For Quotation. Please Submit Your Quotation Inside A "sealed Envelope" To The Doh-mmchd, Bac Office With An Address Of Blk 6, Brgy. Road, Welfareville Compound, Brgy. Addition Hills, Mandaluyong City Submission Of Rfq Through Email Quotation Will Not Be Entertained.

Details: Description Supply And Delivery Of Multiparameter Water Quality Sonde Specifications: With 7 Interchangeable Smart Ports (and Auxillary Port) Communications: Computer Interface, Mobile App Bluetooth Wireles Technology, Usb Data Memory: 512mb Or Higher Data Logger With Rugged Mobile Device (waterproof) And Laptop (core I7-1165g7/8gb Ddr4 3200mhz/512gb M.2 Nvme Pcie Ssd/intel Iris Xe Graphics/15.6" Fhd/windows 11 64bit/ms Office 2021/webcam/ Wifi/bt/lan/sim Slot/msd Slot/audio Port/usb Port With Software For Data Processing And Acquisition) Or Higher Sensor Specifications (range) Conductivity: 0-200 Ms/cm Temperature: -5 To 50°c Depth: 0-250m Optical Dissolved Oxygen: 0 To 50 Mg/l Ph: 0-14 Turbidity: 0-4000 Fnu Ammonium-nh4: 0-200 Mg/l-n Nitrate-no3: 0-200 Mg/l-n With Built-in Gps Coordinates With Standard Solutions For Calibration With Certificate Of Calibration From The Manufacturer With 50m Extendable Cord With Titanium Connector (20m, 10m, 10m, 10m) With Travelling Hard Case For Equipment Protection 5 Years Warranty On Parts Including Sensors Lifetime Free Service Warranty Preventive Maintenance And Calibration Should Be Served By A Certified Service Engineer Twice A Year For 5 Years With Pm Kits Training On The Use, Care And Maintenance Of The Equipment For 15 Pax Note: Place Of Delivery - Ffrdc, Butong, Batangas Delivery Period: 45 Days Upon Receipt Of Ntp

Details: Description Invitation To Bid The City Of Bayawan, Through Its Bids And Awards Committee (bac), Invites Suppliers / Manufacturers / Distributors / Contractors To Bid For The Hereunder Projects: Lot No. Iii Bar And Rebar 7 9 Length Deformed Steel Bar, 10mm Ø X 6m, Grade 33 8 3 Length Deformed Steel Bar, 12mm Ø X 6m, Grade 33 9 53 Length Deformed Steel Bar, 16mm Ø X 6m, Grade 40 10 7 Length Round Bar, Plain, 16mm Dia X 6.0m 11 2 Length Angle Bar, 4.5mm X 25mm X 25mm X 6m Lot No. Iv Construction Supplies And Materials 12 2 Pail Asphalt Cement, Grade 60/70/d (5 Gal/pail) 13 9 Piece Reinforced Concrete Culvert Pipe, .10m Thick X .90m Dia X 1.0m Length 14 4 Kilo Tie Wire, # 16 15 1 Box Blind Rivets, 3mm Dia. X 9mm Long (1000 Pcs/box) 16 1 Kilo Nylon, # 100 17 1 Piece Cutting Disc, 14" X 7mm Masonry/concrete 18 20 Meter Sack Cloth, 3.0m Width (m) Blue 19 6 Piece Road Side Panel Form(0.20m X 3.0m) T: 2.6mm, (see Attached Detail) 20 8 Kilo Welding Rod, E6013, 1/8"ø (kg) (matchless Quality, Iso 9001, 2000 Certified) 21 1 Length Gi Pipe, 40mm Dia X 6m Sched 40 Wt=3.70mm Outside Dia= 48.30 4.069kg/m Heavy Gauge 22 21 Length Pipe, Pvc, 82.55mm Outside Dia X T=3.75mm X L=3.0m, S-1000, Orange 23 2 Sheet Steel Plate, G.i., Gauge # 18 X 1.20m X 2.40m Lot No. V Paints, Tools And Supplies 24 1 Gallon Enamel Paint, Flatwall, White 25 4 Can Acrylic Spray Paint, Flat Black(400cc/can) 26 2 Can Acrylic Spray Paint, Maroon(400cc/can) 27 2 Can Acrylic Spray Paint, Yellow(400cc/can) 28 2 Can Acrylic Spray Paint, Blue(400cc/can) 29 2 Can Acrylic Spray Paint, Red(400cc/can) 30 2 Can Acrylic Spray Paint, Green(400cc/can) 31 2 Can Acrylic Spray Paint, Brown(400cc/can) 32 2 Gallon Epoxy Primer , Gray With Catalyst 33 1 Can Lacquer Thinner (3.75 Lit/can), 34 2 Piece Paint Roller W/ Handle, 175mm 35 2 Piece Paint Brush, 100mm (4"), Hair Type 36 2 Piece Paint Brush, 50mm (2") Hair Type Lot No. Vi Personal Protective Equipment 37 1 Piece Hard Hat, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, White 38 2 Piece Hard Hat, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, Blue 39 4 Piece Hard Hat, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, Yellow 40 10 Pair Gloves, Working, Rubber & Cloth Combination, Good Quality 41 2 Pair Rain Boots, Worker/construction Boots, Waterproof Pvc Non Slip, High Cut, Good Quality Size: 8 42 2 Pair Rain Boots, Worker/construction Boots, Waterproof Pvc Non Slip, High Cut, Good Quality Size: 9 43 2 Pair Rain Boots, Worker/construction Boots, Waterproof Pvc Non Slip, High Cut, Good Quality Size: 10 44 2 Piece "vest, Reflectorized, Safety, Green " 45 2 Piece Vest, Reflectorized, Safety, Orange *** Nothing Follows *** Bid Documents Shall Be Available At The Bac Office, New City Hall, Lgu Bayawan City Upon Payment Of Prescribed Non-refundable Fee In The Amount Of Php 500.00 Bidders Shall Drop Their Technical And Financial Proposals In The Bid Box At The Bac Office, Bayawan City On Or Before The Deadline Of Submission Of Bids As Shown Below. All Particulars Relative To Eligibility Process, Opening And Evaluation Of Bids, Postqualification And Award Of Contract Shall Be Governed By The Applicable Provisions Of Ra. 9184. The City Of Bayawan Reserves The Right To Reject Any Or All Bids, To Waive Any Defects Or Formality Therein And To Accept Bids Considered Responsive And Most Advantageous To The Government. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule Issuance Of Bid Documents January 6, 2025 To January 27, 2024@ 5:00 P.m. Pre-bid Conference January 14, 2025@ 9:00 Am Deadline/opening Of Bids January 28, 2025@ 9:00 Am Post Qualification February 4, 2025@ 9:00 Am Awarding Of Bids February 11, 2024@ 9:00 Am Approved: (sgd)virginia D. Sadiasa City Civil Registrar Bac Chairman

Details: Description Lot No. Unit Quantity Specifications Approved Budget For Contract Price Of Bid Documents Delivery Period 1 Set 100 Supply, Delivery And Installation Of 300w High-power Solar Lights With 6-meter Hot-dip Treated Poles For Farmers Intended For Tdif 2024 Supplemental Budget 7,281,554.00 10,000.00 Goods Must Be Delivered Within 30 Calendar Days After The Receipt Of The Notice To Proceed (ntp) 2024-12-9095 Materials: Aluminum Led Qty: 300 Pcs Led Light Chip Smd3030 Led Power 300w Input Voltage: Dc 12.8v Lighting Control + Time Control, Mppt Batteries: 12.8v 42ah Lifepo4 Solar Panels: 18v 70w Mono Lighting Effect: 170lm/w Luminous Flux (im):10000-12000lm Cloudy And Rainy Days: 3-5 Days Charge Effective Sunshine For 6-7 Hours Installation Height: 6-10m Installation Space: 25-35m Diameter Of Lamp Pole: 76-105mm Condition Temperature: -20-20-65° C Work Humidity:> 95% Color Rendering Index: 80ra Controller Efficiency: ≥0.90 Lens Angle: 80*140 Work Time: 0-12h Waterproof: Ip65 Short Current: > 5ma Gw: 22kg Nw:19kg Lamp Size: 1250*359*55mm Packing Size: 1350*409*205mm Certifies: Ce, Rohs, Iso9001 Warranty: 5 Years Specification Parameter (treated Pole) Total Height: 6 Meters Single Arm Hot-dip Treated Pole Main: 60*166*3.0 Thickness Flange: 280*280*14cm Lamp Arm: 2*1.6m*60 Tube Internal And External Integrated Hot-dip Galvanizing *** Nothing Follows *** Delivery Area Basilan 2 Set 66 Supply, Delivery And Installation Of 300w High-power Solar Lights With 6-meter Hot-dip Treated Poles For Farmers Intended For Tdif 2024 Supplemental Budget 4,805,826.00 5,000.00 Goods Must Be Delivered Within 30 Calendar Days After The Receipt Of The Notice To Proceed (ntp 2024-12-9094 Materials: Aluminum Led Qty: 300 Pcs Led Light Chip Smd3030 Led Power 300w Input Voltage: Dc 12.8v Lighting Control + Time Control, Mppt Batteries: 12.8v 42ah Lifepo4 Solar Panels: 18v 70w Mono Lighting Effect: 170lm/w Luminous Flux (im):10000-12000lm Cloudy And Rainy Days: 3-5 Days Charge Effective Sunshine For 6-7 Hours Installation Height: 6-10m Installation Space: 25-35m Diameter Of Lamp Pole: 76-105mm Condition Temperature: -20-20-65° C Work Humidity:> 95% Color Rendering Index: 80ra Controller Efficiency: ≥0.90 Lens Angle: 80*140 Work Time: 0-12h Waterproof: Ip65 Short Current: > 5ma Gw: 22kg Nw:19kg Lamp Size: 1250*359*55mm Packing Size: 1350*409*205mm Certifies: Ce, Rohs, Iso9001 Warranty: 5 Years Specification Parameter (treated Pole) Total Height: 6 Meters Single Arm Hot-dip Treated Pole Main: 60*166*3.0 Thickness Flange: 280*280*14cm Lamp Arm: 2*1.6m*60 Tube Internal And External Integrated Hot-dip Galvanizing *** Nothing Follows *** Delivery Area Maguindanao Del Sur 3 Set 100 Supply, Delivery And Installation Of 300w High-power Solar Lights With 6-meter Hot-dip Treated Poles For Farmers Intended For Tdif 2024 Supplemental Budget 7,281,554.00 10,000.00 Goods Must Be Delivered Within 30 Calendar Days After The Receipt Of The Notice To Proceed (ntp 2024-12-9092 Materials: Aluminum Led Qty: 300 Pcs Led Light Chip Smd3030 Led Power 300w Input Voltage: Dc 12.8v Lighting Control + Time Control, Mppt Batteries: 12.8v 42ah Lifepo4 Solar Panels: 18v 70w Mono Lighting Effect: 170lm/w Luminous Flux (im):10000-12000lm Cloudy And Rainy Days: 3-5 Days Charge Effective Sunshine For 6-7 Hours Installation Height: 6-10m Installation Space: 25-35m Diameter Of Lamp Pole: 76-105mm Condition Temperature: -20-20-65° C Work Humidity:> 95% Color Rendering Index: 80ra Controller Efficiency: ≥0.90 Lens Angle: 80*140 Work Time: 0-12h Waterproof: Ip65 Short Current: > 5ma Gw: 22kg Nw:19kg Lamp Size: 1250*359*55mm Packing Size: 1350*409*205mm Certifies: Ce, Rohs, Iso9001 Warranty: 5 Years Specification Parameter (treated Pole) Total Height: 6 Meters Single Arm Hot-dip Treated Pole Main: 60*166*3.0 Thickness Flange: 280*280*14cm Lamp Arm: 2*1.6m*60 Tube Internal And External Integrated Hot-dip Galvanizing *** Nothing Follows *** Delivery Area Maguindanao Del Sur 4 Set 132 Supply, Delivery And Installation Of 300w High-power Solar Lights With 6-meter Hot-dip Treated Poles For Farmers Intended For Tdif 2024 Supplemental Budget 9,611,651.00 10,000.00 Goods Must Be Delivered Within 30 Calendar Days After The Receipt Of The Notice To Proceed (ntp 2024-12-9091 Materials: Aluminum Led Qty: 300 Pcs Led Light Chip Smd3030 Led Power 300w Input Voltage: Dc 12.8v Lighting Control + Time Control, Mppt Batteries: 12.8v 42ah Lifepo4 Solar Panels: 18v 70w Mono Lighting Effect: 170lm/w Luminous Flux (im):10000-12000lm Cloudy And Rainy Days: 3-5 Days Charge Effective Sunshine For 6-7 Hours Installation Height: 6-10m Installation Space: 25-35m Diameter Of Lamp Pole: 76-105mm Condition Temperature: -20-20-65° C Work Humidity:> 95% Color Rendering Index: 80ra Controller Efficiency: ≥0.90 Lens Angle: 80*140 Work Time: 0-12h Waterproof: Ip65 Short Current: > 5ma Gw: 22kg Nw:19kg Lamp Size: 1250*359*55mm Packing Size: 1350*409*205mm Certifies: Ce, Rohs, Iso9001 Warranty: 5 Years Specification Parameter (treated Pole) Total Height: 6 Meters Single Arm Hot-dip Treated Pole Main: 60*166*3.0 Thickness Flange: 280*280*14cm Lamp Arm: 2*1.6m*60 Tube Internal And External Integrated Hot-dip Galvanizing *** Nothing Follows *** Delivery Area Cotabato City Maguindanao Del Norte Maguindanao Del Sur