Waterproofing Tenders

Details: Description Item Number Description Qty Unit Estimated Budget 1 Base Radio Vhf 2 Units 33,490.00 2 Portable Radio Vhf & Waterproof 4 Units 28,200.00 3 Magnetic Mount 1 Unit 1,500.00 2 Mobile Antenna Larsen Po150 1 Unit 4,685.00 Xxxxxxxxxx Total: Php 67,875.00

Details: Description Request For Quotation (rfq) Supply And Delivery Of Ppe (monitoring Shoes) For Emb Xii Rfq No. 2025-01-0002 1. The Department Of Environment And Natural Resources – Environmental Management Bureau Xii (denr-emb Xii) Hereinafter Referred To As The “purchaser” Now Requests For Submission Of Price Quotations For The Procurement Of The Aforesaid Items Described In The Technical Specifications. No. Description Qty Unit Abc 1. Monitoring Shoes 25 Piece ₱ 200,000.00 Specs: Upper: Durable And Waterproof Leather/textile/mesh Treated With Material For Water And Stain Resistance. Midsole: Lightweight Midsole For Superior Cushioning And High Energy Return. Outsole: Non-marking Grip Rubber Outsole For Advanced Traction On Various Surfaces. Lug Patterns Designed For Enhanced Grip And Stability Waterproofing: Seam-sealed Construction For Full Waterproof Protection Breathable Membranes For All-weather Comfort. Fit And Comfort: Padded Collar And Tongue For Added Comfort. Lace-up Closure System For Secure Fit, Removable Contoured Insole For Customizable Support. * * * Nothing Follows * * * 2. A Set Of Technical Requirements Are Provided In Attachment/s. Item/s Listed Under The Purchaser’s Terms Of Reference/s Must Be Complied With On A Pass-fail Basis. Failure To Meet Any One Of The Requirements May Result In Rejection Of The Quotation. The Approved Budget For This Contract Is P200,000.00 3. Bidding Procedures Will Be Conducted In Accordance With The Provisions Of The Implementing Rules And Regulations (irr) Of Republic Act 9184. 4. It Is The Intent Of The Purchaser To Evaluate The Bid/quotation On A Lot Basis And Award Will Be Made To The Bid/quotation Or Combination Of Quotations Resulting In The Lowest Evaluated Quotation Meeting The Purchaser’s Technical Specifications. 5. Quotations Must Be Delivered At The Address Below Not Later Than 12:00 Pm, January 27, 2025 Environmental Management Bureau Xii Prime Regional Center, Brgy. Carpenter Hill City Of Koronadal, South Cotabato 6. Prices Must Be Quoted In Philippine Peso And Must Include The Unit Price And Total Price, Inclusive Of All Taxes To Be Paid And Other Incidental Cost To The Delivery Site/s If The Contract Is Awarded. Bid/quotation Submission Maybe Typewritten And Must Be Placed In A Sealed Envelope Full Board Meals And Accommodation For The Conduct Of Training/workshop On Ecological Solid Waste Management For Enmos And Eswms Personnel At Kidapawan City With Rfq No. 2025-01-0001. The Emb Xii Is Implementing A Sealed Envelope Procedure Of Bid/proposal/quotation Submission. Sealed Bids Must Be Forwarded To Our Records Management Section For Recording Purposes And Compliance To Emb Memorandum Dated January 12, 2018. Late Bids Shall Be Automatically Disqualified. 7. Bids/quotations Shall Be Valid For Sixty (60) Calendar Days From The Deadline Of Submission Of Bids. 8. The Delivery Period Shall Be Within Thirty (30) Calendar Days From Receipt Of The Purchase Order (po) And/or Job Order (jo). The Supplier Must Inform The Purchaser At Least Three (3) Days Before The Date Of Delivery. The Delivery Will Be Made Only During Working Days And Hours. 9. Delivery Sites: See Delivery Sites Enumerated In The Quotation Form Environmental Management Bureau Xii Prime Regional Center, Brgy. Carpenter Hill City Of Koronadal, South Cotabato 10. The Applicable Rate For Late Deliveries Is One Tenth (1/10) Of One (1) Percent Of The Cost Of The Unperformed Portion Of The Contract For Every Day Of Delay. The Maximum Deduction Shall Be Ten Percent (10%) Of The Amount Of Contract. Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Contract Amount, The Purchaser Shall Rescind The Contract Without Prejudice To Other Courses Of Action And Remedies Open To It. 11. The Purchaser Reserves The Right To Accept Or Reject Any Quotation, And To Annul The Bidding/shopping Process Or Reject All Quotations At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder/bidders. The Purchaser Also Reserves The Right To Waive Minor Deviations/defects Or Infirmities Therein. A Minor Deviation/defect Or Infirmity Is One That Does Not Materially Affect The Overall Functionality Of The Material And The Capability Of The Supplier To Perform The Contract. 12. Participating Service Provider/s Must Abide By The Existing Health, Safety, Environment, Quality And Other Related Laws And Procedures As Prescribed By The Philippine Government. 13. The Prospective Bidder Shall Submit The Following: A) Quotation Form B) Technical Specifications C) Proof Of Philgeps Registration Engr. Rashid P. Abdullah Chairperson, Bids And Awards Committee   Other Requirements 1. Quotation Submission Requirements - Supplier Must Submit A Duly Accomplished And Signed Price Quotation, And Supplier’s Line By Line Technical Specifications Compliance. - Supplier’s Must Accomplish/fill All Required Pages To Facilitate Documentation - Supplier Must Be Philgeps Registered. - Business Permit/license Permit - Failure To Follow The Above Requirements May Result To Outright Rejection Of Submitted Quotation/s. 2. Evaluation And Awarding Of Quotation - The Purchaser Will Evaluate And Compare The Offers, Which Have Been Determined As Responsive Pursuant To The Completeness Of The Purchaser Requirements - Compliance To The Technical Specifications - Awards Shall Be Made To The Lowest Evaluated And Responsive Quotation. - Submission Of Requirements Containing False Information Or Falsified Documents That Contain False Information Or Concealment Of Such Information In Order To Influence The Outcome Of Eligibility Screening Or Any Other Stage Of The Procurement Process May Result To Blacklisting Guidelines As Provided In The Irr Of Ra 9184. 3. Terms Of Payment - 100% Of The Contract Price Will Be Paid Upon Verification/inspection And Acceptance Of The Services In Compliance To Existing Government Auditing And Accounting Procedures. Quotation Form Date: _____________________ Rfq No. ____________________ Attention: Bids And Awards Committee Environmental Management Bureau Xii Prime Regional Center, Brgy. Carpenter Hill City Of Koronadal, South Cotabato 1) Having Examined The Subject Request For Quotation (rfq) Including The Technical Specifications, We, The Undersigned Offer To Supply And Deliver The Following: No. Description Delivery Site Quantity/uom Unit Price Total Price 1. Monitoring Shoes 25/piece Specs: Upper: Durable And Waterproof Leather/textile/mesh Treated With Material For Water And Stain Resistance. Midsole: Lightweight Midsole For Superior Cushioning And High Energy Return. Outsole: Non-marking Grip Rubber Outsole For Advanced Traction On Various Surfaces. Lug Patterns Designed For Enhanced Grip And Stability Waterproofing: Seam-sealed Construction For Full Waterproof Protection Breathable Membranes For All-weather Comfort. Fit And Comfort: Padded Collar And Tongue For Added Comfort. Lace-up Closure System For Secure Fit, Removable Contoured Insole For Customizable Support. * * * Nothing Follows * * * 2) We Undertake, If Our Quotation Or Bid Is Accepted, To Deliver The Above Goods Within The Thirty (30)-day Delivery Period From Receipt Purchase Order (po) Or Job Order (jo). 3) We Agree To Abide By This Quotation/bid For A Period Of Sixty (60) Days After The Deadline Of Submission Specified In The Rfq. 4) We Understand That Payment For Items Delivered Will Be Made To The Winning Supplier After The Inspection And Acceptance Of Goods Delivered.

Details: Guar Gum - Oil, Boot Ankle Leather Direct Vulcanized Sole, Boot Multipurpose, Boot Brush, Boot High Ankle Leather Dvs, Boot Crampon In Pairs Mountain Climbing Boot, Waterproof Boot Boot Combat Rubber In Pairs, Boots Ankle Leather Printed Grain For General Purpose - Jss Specification, Boot Ankle Textile (jungle Boot), Direct Injected Pu Sole, Boot Ankle Textile Jungle Boot Direct Moulded Pu Sole In Pairs

Details: Description Invitation To Bid Lgu-el Salvador City, Misamis Oriental Through Its Bac, Invites Interested Bidders To Apply For Eligibility And If Found Eligible To Bid For The Contract: 1. Invitation To Bid No. : 2025-01-016 Project Id No. : 25-003-20% Name Of Project : Establishment Of Centralized Water System With Reservoir (infra) Location : Molugan, El Salvador City, Misamis Oriental Brief Description : Establishment Of Centralized Water System With Reservoir With The Following Scope Of Works: Deep Well Drilling; Pump And Accessories; Pumphouse/electrical Room; Water Sampling; Pump Testing And Water Testing; Layout And Structure Excavation; Structural Concrete; Reinforcing Steel Bars; Forms And Scaffoldings; Provision Of Pipes; Waterproofing; Railings And Ladder; Project Billboard; Construction Safety And Health; Mobilization And Demobilization; Temporary Facilities/bunkhouse. Estimated Budget Cost : ₱3,692,370.22 Source Of Fund : 20% Of Local Development Fund Cy 2025 Contract Duration/s : Ninety (90) Calendar Days Bidding Documents Fee : ₱ 5,000.00 Bidders Must Purchase Bid Documents And Should Have Experienced In Undertaking Similar Projects With An Amount Of At Least Fifty Percent (50%) Of The Proposed Project For Bidding. The Eligibility Check As Well As The Preliminary Examination Of Bids Shall Use Non-discretionary Pass/fail Criteria. Time And Deadlines For Procurement Activities: Issuance Of Bid Documents - From: January 23, 2025 To February 11, 2025 During Office Hours Pre-bid Conference - January 30, 2025 @ 10:00 A.m. Submission Of Bids - Deadline: February 13, 2025 @ 9:00 A.m. Opening Of Bids - February 13, 2025 @ 9:00 A.m. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person Or Through Electronics Means. Bids Must Be Accompanied By A Bid Security, In The Amount And Acceptable Form As Stated In Section 27.2 Of The Revised Irr. Prospective Bidders Shall Submit Their Duly Accomplished Forms As Specified In The Bds In Two (2) Separate Sealed Envelopes To The Bac Chairperson. The First Envelope Shall Contain The Technical Component Of The Bid Including The Eligibility Requirements. The Second Envelope Shall Contain The Financial Component Of The Bid. The Bac Will Accept Partial Bid And Contract Will Be Awarded To The Lowest Calculated Responsive Bid (lcrb) As Determined In The Bid Evaluation And Post-qualification. The Lgu – El Salvador City Reserves The Right To Accept And Reject Any Bid Annul The Bidding Process Any Time Before Contract Award And Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Incurred In The Preparation Of Their Bids. For Further Information, Please Refer To: Ms. Nancy A. Macalaguing Bac Secretariat 3rd Floor, Bac Bidding Room, Executive Building, El Salvador City Hall, Poblacion, El Salvador City, Misamis Oriental Cellphone No.: 0997-308-5718 / 0938-074-3696 [sgd] Nolly Adrian B. Gabule Bac Chairperson Pay Item No. Description Unit Quantity (1) (2) (3) (4) Drilling I Deep Well Drilling Meter 100.00 Ii Pump And Accessories Lump Sum 1.00 Iii Pump House/electrical Room Square Meter 2.25 Iv Water Sampling Set 2.00 V Pump And Water Testing Hour 48.00 Reservoir Vi Layout And Structure Excavation Cubic Meter 19.98 Vii Structural Concrete Cubic Meter 18.09 Viii Reinforcing Steel Bars Kilogram 2,547.20 Ix Forms And Scaffoldings Lot 1.00 X Provision Of Pipes Lot 1.00 Xi Waterproofing Coat 2.00 Xii Railings And Ladder Lot 1.00 General Requirement Xiii Project Billboard Lump Sum 1.00 Xiv Construction Safety And Health Lump Sum 1.00 Xv Mobilization And Demobilization Lump Sum 1.00 Xvi Temporary Facilities/bunkhouse Lump Sum 1.00 X-x-x-x-x-x-x-x X-x-x-x-x-x-x-x

Details: Description Invitation To Bid Lgu-el Salvador City, Misamis Oriental Through Its Bac, Invites Interested Bidders To Apply For Eligibility And If Found Eligible To Bid For The Contract: 1. Invitation To Bid No. : 2025-01-017 Project Id No. : 25-004-20% Name Of Project : Establishment Of Centralized Water System With Reservoir (infra) Location : Bolobolo, El Salvador City, Misamis Oriental Brief Description : Establishment Of Centralized Water System With Reservoir With The Following Scope Of Works: Deep Well Drilling; Pump And Accessories; Pumphouse/electrical Room; Water Sampling; Pump Testing And Water Testing; Layout And Structure Excavation; Structural Concrete; Reinforcing Steel Bars; Forms And Scaffoldings; Provision Of Pipes; Waterproofing; Railings And Ladder; Project Billboard; Construction Safety And Health; Mobilization And Demobilization; Temporary Facilities/bunkhouse. Estimated Budget Cost : ₱ 3,692,370.22 Source Of Fund : 20% Local Development Fund Cy 2025 Contract Duration/s : Ninety (90) Calendar Days Bidding Documents Fee : ₱ 5,000.00 Bidders Must Purchase Bid Documents And Should Have Experienced In Undertaking Similar Projects With An Amount Of At Least Fifty Percent (50%) Of The Proposed Project For Bidding. The Eligibility Check As Well As The Preliminary Examination Of Bids Shall Use Non-discretionary Pass/fail Criteria. Time And Deadlines For Procurement Activities: Issuance Of Bid Documents - From: January 23, 2025 To February 11, 2025 During Office Hours Pre-bid Conference - January 30, 2025 @ 10:00 A.m. Submission Of Bids - Deadline: February 13, 2025 @ 9:00 A.m. Opening Of Bids - February 13, 2025 @ 9:00 A.m. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person Or Through Electronics Means. Bids Must Be Accompanied By A Bid Security, In The Amount And Acceptable Form As Stated In Section 27.2 Of The Revised Irr. Prospective Bidders Shall Submit Their Duly Accomplished Forms As Specified In The Bds In Two (2) Separate Sealed Envelopes To The Bac Chairperson. The First Envelope Shall Contain The Technical Component Of The Bid Including The Eligibility Requirements. The Second Envelope Shall Contain The Financial Component Of The Bid. The Bac Will Accept Partial Bid And Contract Will Be Awarded To The Lowest Calculated Responsive Bid (lcrb) As Determined In The Bid Evaluation And Post-qualification. The Lgu – El Salvador City Reserves The Right To Accept And Reject Any Bid Annul The Bidding Process Any Time Before Contract Award And Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Incurred In The Preparation Of Their Bids. For Further Information, Please Refer To: Ms. Nancy A. Macalaguing Bac Secretariat 3rd Floor, Bac Bidding Room, Executive Building, El Salvador City Hall, Poblacion, El Salvador City, Misamis Oriental Cellphone No.: 0997-308-5718 / 0938-074-3696 [sgd] Nolly Adrian B. Gabule Bac Chairperson Pay Item No. Description Unit Quantity (1) (2) (3) (4) Drilling I Deep Well Drilling Meter 100.00 Ii Pump And Accessories Lump Sum 1.00 Iii Pump House/electrical Room Square Meter 2.25 Iv Water Sampling Set 2.00 V Pump And Water Testing Hour 48.00 Reservoir Vi Layout And Structure Excavation Cubic Meter 19.98 Vii Structural Concrete Cubic Meter 18.09 Viii Reinforcing Steel Bars Kilogram 2,547.20 Ix Forms And Scaffoldings Lot 1.00 X Provision Of Pipes Lot 1.00 Xi Waterproofing Coat 2.00 Xii Railings And Ladder Lot 1.00 General Requirement Xiii Project Billboard Lump Sum 1.00 Xiv Construction Safety And Health Lump Sum 1.00 Xv Mobilization And Demobilization Lump Sum 1.00 Xvi Temporary Facilities/bunkhouse Lump Sum 1.00 X-x-x-x-x-x-x-x X-x-x-x-x-x-x-x

Description: CATEGORY: Tool Kit Set , Palm Sized Digital Multimeter , Clamp Meter , Plastic Heat Gun , Screw Driver Machine , Electrical Cutter , Long Range Torch , Ladder , HT Gloves , 6 MM Drill Bit , 10 MM Drill Bit , Screw Driver Bit , T Handle Socket Range , Allen Key Set , Electric Tape , Slide Wrench , Spanner Set , Wire Stripper , Electric Plier , Screw Driver Set , Hammer Cross Peen , Electrical Wire Cutter , Line Tester , Nose Plier , Hacksaw Blades , 1 MM Wire , 1.5 MM Wire , 6Amp 3 Pin Top , 16Amp 3 Pin Top , Fuel Deilvery Pump , Waterproof Rain Coat , Shock Proof Shoes Size 9 , Shock Proof Shoes Size 8 , Safety Helmet for Industrial Use , Industrial Safety Protective Equipment , Crimping Tool , Electric High Pressure Tank Washer , Adjustable Wrench , PPR Cutter , 14 Inch Type Pipe Wrench , 16 Inch Type Pipe Wrench , Hammer Drill Machine , T Handle Allen Key Set , Sledge Hammer with Fibreglass Handle , Python Flat and Pointed Construction , T Handle Spanner Socket Wrench Set , TDS Water Meter , Nose Plier Set , Ring Spanner Set , Level Surface , Professional Cutter , 2 in 1 Long Screw Driver , Rough File , Flat File , Drill Bits 13 MM , Drill Bits 16 MM , Compact Welding Machine , Safety Glass and Nylon Gloves , Portable Gas Torch Gun , Plumbing Gloves , Oil Can for Mechanical Use , Diamond Coated Core Hole Saw Drill Bit , Wood Hole Saw Cutting Set , Pipe Threader Plumbing Tool Kit , Stainless Steel Drain Pipe Cleaning Spring Stick , Carry Tool Kit Box , Silicon Caulking Gun , Circlip Plier , First Aid Kit , Pipe Swaging Tool

Details: H4 8115-000108 Box Rigid 152.5 X 101.5 X 76 Mm X 1.12 mm , H4 8040-000047 Tape Adhesive W-proof W 40mm X l 65 , H5 1080000001 Ec Net Pin For Sandy Soil , H4 8040-000048 Tape Adhesive Transparent Waterproof wid , H1 5350-000018 Abrasive Paper Glass Is Grit 120 size O

Details: Continuing A Legacy Of Outstanding Public Architecture, The General Services Administration (gsa) Seeks To Commission Our Nation’s Most Talented Architects, Landscape Architects, Interior Designers, Engineers And Construction Professionals To Design And Construct Federal Facilities Of Outstanding Quality And Value. These Projects Are To Demonstrate The Value Of True Integrated Design That Balances Aesthetics, Functionality, Cost, Constructability, Durability And Reliability; Create Environmentally Responsible And Superior Workplaces For Federal Employees And Give Contemporary Form And Meaning To Our Democratic Values. in This Context, Gsa Announces An Opportunity For Design And Construction Excellence In Public Architecture For Performance Of Architectural Engineering Design And Construction Services In Accordance With Gsa Quality Standards And Requirements. As Required By Law, Regulation Or Executive Order, All Facilities Will Meet Performance Targets And Security Requirements. gsa Intends To Award A Design-build (db) Contract For The Repair Or Replacement Of The Plaza And Structural Support System Of The Howard M. Metzenbaum U.s. Courthouse (metzenbaum) In Cleveland, Oh, Pursuant To The Federal Acquisition Regulation (far) Two-phase Design-build Selection Procedures (far 36.3). The Project Includes Design-build Services. this Project Will Take Place At The Howard M. Metzenbaum U.s. Courthouse In Cleveland, Oh. The Metzenbaum Courthouse, Built Between 1903 And 1910, Is A Five-story Structure Designed In The Neoclassical Style. It Is One Of The Most Significant Structures In Cleveland’s Downtown Cityscape And Is Listed In The National Register Of Historic Places. The Facade Is Clad With Granite And Remains Essentially The Same As When It Was Originally Constructed. Between 2002 And 2005, The Courthouse Was Modernized For The Primary Use Of The Bankruptcy Courts After The District Courts Relocated To The Newly Constructed Stokes Courthouse. the Metzenbaum U.s. Courthouse Is Located At The Center Of Cleveland Ohio’s Public Square. This Prominent Location Adds To The Building’s Status As A Cleveland Landmark. The Building Is Surrounded On Three Sides By A Plaza That Addresses The Public Square. The Plaza Is Heavily Trafficked By Pedestrians And Supports Two Priceless Daniel Chester French Statues That Are Part Of The Gsa’s Public Art Collection. the Plaza’s Concrete, Waterproofing Membrane, And Most Of Its Supporting Steel Framing Was Last Replaced In 1972, And The Top Slab Was Replaced In 1987. Shoring Was Installed Over A Decade Ago To Support The Sidewalk Vault Structurally And To Prevent The Public Sidewalk From Collapsing. Maintenance And Repairs Are No Longer Sufficient For Preventing Water Leaks Through The Plaza. the Plaza’s Concrete Structural Slab Is Failing. Widespread Deterioration Under The Plaza’s Structural Slab Ranges From Small Spalls To Large Areas Of Complete Delamination. The Damage Has Gone Beyond Concrete And Reinforcing Deterioration To Significant Loss Of Structural Steel Sections. The Steel Can Be Restored In Some Areas But Will Have To Be Replaced In Others. The Elevator Lift That Serves The Mail Screening Room In The Basement Must Remain Operational During The Project And Will Be Used By The Construction Contractor For Vertical Conveyance. Refurbishment Of The Lift Will Be Required After The Plaza Work Is Completed. the Foundation Wall’s Lack Of Waterproofing Allows Moisture And Water To Infiltrate Through Several Cracks. Waterproofing That Was Applied In Previous Slab Replacement Projects Only Goes Down A Few Feet Below Grade And Has Worn Away. The Remainder Of The Foundation Wall Has No Waterproofing. The Wall Moisture Has Corroded The Full Height Of The Vertical Steel Channels At The Inside Face Of The Wall That Are Likely A Key Part Of The Wall’s Strength. the Two Significant Daniel Chester French Statues Are Located On The South Elevation Of The Building. The Statues Are Supported By Both The Building Exterior Wall And The Sidewalk Slab. Movement And Deterioration Of The Sidewalk Slab Create A Risk Of Cracking In The Statues. The Original Clay Tile Floor Slab Supporting The Base Of The Statues Has Fallen Away, Leaving Only Unreinforced Cement Topping Between The Steel Beams And The Statue Base. A New Support System Needs To Be Installed To Isolate The Statues From The Sidewalk Slab. this Project Seeks Design Build Services For The Improvements Necessary To Repair Or Replace The Plaza And Its Structural Support System For The Safety Of Tenants And Visitors And Long Term Stabilization Of The Property. this Project Will Utilize The Design-build (db) Delivery Method, With The Db Contract Procured By Competitive Negotiation Using A Two-phase Design-build Selection Procedure (far 36.3). A Single Db Contract Will Be Issued For A Design Concept Submission, Design Development Phase And Construction Documents Phase Services, As Well As All Construction Work. For This Contract Award Process, Gsa Will Issue A Solicitation Consisting Of Phase I And Phase Ii, Respectively. the Purpose Of Phase I (the Request For Qualifications) Is To Select The Most Highly Qualified Offerors From Phase I To Participate In Phase Ii (the Request For Proposals). At The Conclusion Of Phase I, Gsa Will Invite The Short-listed Offerors To Submit Phase Ii Proposals. Phase Ii Proposals Will Require Submission Of Technical And Price Proposals, Which Are Evaluated Separately In Accordance With Far Part 15. Potential Offerors Are Hereby Placed On Notice That Gsa Will Publicly Announce The Names Of The Phase I “short-list” On Sam.gov. the Technical Evaluation Factors For Phase I Are As Follows: technical Qualifications a. Subfactor 1.a: Experience Of The General Contractor And A/e 40 Points b. Subfactor 1.b: Past Performance Of The General Contractor And A/e 15 Points approach To Design Build 20 Points lead Designer 25 Points total Points = 100 the Maximum Number Of Shortlisted Offers Advancing To Phase Ii Will Be Three (3). the Technical Evaluation Factors For Phase Ii Are As Follows: 1. Quality Of Design Concept 40 Points 2. Qualifications, Experience And Past Performance Of Key Personnel 20 Points 3. Management And Technical Approach 20 Points 4. Sustainability 15 Points 5. Small Business Utilization 5 Points Total Points = 100 in Consideration Of The Preparation Of A Phase Ii Technical Proposal, Gsa Will Pay A Stipend Of $52,500.00 To Each Of The Phase Ii Offerors Who Satisfy The Terms Of The Request For Proposals, But Are Not Selected For Award Of The Resulting Contract. at The Conclusion Of Phase Ii, Gsa Intends To Award A Contract To A Single Offeror For All Design And Construction Services. this Contract Will Be A Full And Open Procurement, Available To Both Large And Small Business Firms. As Part Of The Phase Ii Proposal, Large Business Offerors Will Be Required To Submit An Acceptable Small Business Subcontracting Plan In Accordance With Far Part 19.7. the Request For Qualifications Will Be Issued Electronically On Or About January 29, 2025. A Pre-proposal Meeting Will Be Held On Or About February 12, 2025 In Cleveland, Oh At 1:00pm Est. Prospective Attendees Are To Register Their Company With The Gsa Contracting Officer, Anna Vanko, Via Email At Anna.vanko@gsa.gov For All Individuals Planning To Attend. A. Call In Reservations Will Not Be Accepted. This Meeting Is Intended To Review The Scope Of The Project And The Submittal Requirements For Phase I. Please Note, Contractors Will Be Required To Wear A Hardhat For A Portion Of The Walk-through. Hardhats Must Be Provided By The Offeror; Gsa Is Unable To Provide Hardhats For Those Participating. An Additional Site Visit And Pre-proposal Conference Will Be Scheduled During The Phase Ii Portion As Well. award Is Anticipated In March Of 2026 With Substantial Completion Anticipated In Winter 2029/2030. the Estimated Cost Range Is Between $18,000,000 And $28,000,000. this Is A Negotiated, Best Value Procurement. The Contractor Is To Provide All Management, Supervision, Manpower, Equipment And Supplies Necessary For This Project. The Proposed Contract Is Being Solicited As Full And Open Competition. The Request For Proposal Is Planned To Be Issued In January 2025. In Addition To The Construction Opportunity Reflected Herein, Gsa Is Seeking Suppliers And Manufacturers That Are Interested In Supplying Low Embodied Carbon Asphalt, Concrete (and Cement), Glass And Steel Materials For The Project. Suppliers And Manufacturers Of Materials Meeting Gsa’s Inflation Reduction Act Low Embodied Carbon Asphalt, Concrete (and Cement), Glass And Steel Requirements May Submit An Expression Of Interest To The Contact Below No Later Than March 4, 2025. expressions Of Interest Should Indicate Materials Available And Global Warming Potential Values Reflected In Materials’ Environmental Product Declarations. Submission Of An Expression Of Interest Grants Gsa Your Permission To Publish Your Firm’s Contact Information And Offerings For Use By Potential Offerors On Gsa Construction Requirements. Supplier And Manufacturer Contact Information Will Be Published In An Informational Amendment Issued By Gsa And, Potentially, In Other Fora. by Participating In The Competition, Offerors Consent To Unrestricted Gsa Use Of Supplier Names And The Gwp Values Associated With Supplier Materials. Such Information May Be Disclosed Publicly Or Used To Inform Other Low Embodied Carbon Procurement Activities. Technical Solutions, Supplier Pricing, And Supplier-offeror Terms And Conditions Will Not Be Shared. Any Objection Shall Be Transmitted To The Contracting Officer By The Due Date For Offers And Shall Adhere To 41 C.f.r. § 105-60.601. market Research Resources For Identifying Qualifying Materials May Include, But Are Not Limited To, Astm International’s Epd Page, Building Transparency’s Embodied Carbon In Construction Calculator (ec3), Icc Evaluation Service’s Epd Directory, Epd International Ab’s Epd Library, The National Asphalt Paving Association’s Emerald Eco-label Epd Tool, The National Ready Mixed Concrete Association’s Concrete Epds Page, Nsf's Search For Epds Tool, And Ul’s Spot Product Catalog. note: The Information Provided Herein Is For Informational Purposes Only And Does Not Indicate Or Imply Federal Endorsement Of Any Organization, Business, Material Or Product. The Government Makes No Representation Or Warranty Concerning The Quality, Performance, Availability Or Suitability Of Any Organization, Business, Material Or Product

Details: Description Item No. Qty Unit Name And Description Of The Article/s Approved Budget Contract Per Item Brand / Model Unit Price Total Amount 1 1300 Piece Amusement Sticker 3"x5" Inches Size With Border, 3m Reflectorized Sticker, 12 Mil Heavy Duty Thickness, High Gloss Vinyl Outdoor Sticker, Waterproof And Heat Resistant With Security Ink Feature And Water Marks 130,000.00 *** Nothing Follows *** Total Approved Budget For The Contract 130,000.00

Details: Description Item No. Qty Unit Name And Description Of The Article/s Approved Budget Contract Per Item Brand / Model Unit Price Total Amount 1 3200 Piece Business Plate Sticker 1"x2" Inches Size With Border, 3m Reflectorized Sticker, 12 Mil Heavy Thickness, High Gloss Vinyl Ouitdoor Sticker, Waterproof And Heat Resistant With Security Ink Feature And Water Marks 89,600.00 *** Nothing Follows *** Total Approved Budget For The Contract 89,600.00