Vehicle Tenders

Details: Sources Sought Announcement contracting Office Address: department Of Defense Education Activity (dodea), Facilities Procurement Branch, The Mark Center, 4800 Mark Center Drive, Alexandria, Virginia 22350. introduction: the Department Of Defense Education Activity (dodea) Is Issuing This Request For Information (rfi) As A Means Of Conducting Market Research To Identify Parties Having An Interest In And The Resources To Support This Requirement For The Dodea Facilities Asset Management Program (fam). This Rfi Is An Opportunity For Industry To Assist In Further Refining Dodea’s Potential Contracting Approaches For Fam. The Intent Is For Industry To Share Their Experiences With Similar Efforts And To Provide Comments And Suggestions On The Candidate Concepts And Objectives In This Rfi. The Government Plans To Use The Information Provided By Industry To Develop A Comprehensive Procurement Strategy And A Fam Solicitation. Any Information Used Will Be On A Non-attribution Basis. This Will Be An 8(a) Competitive Award. dodea Operates A Diverse And Geographically Dispersed School District For 68,000 Military Connected Students In 7 States And 11 Countries And Territories. Dodea’s Goal Is To Provide An Exemplary Education That Inspires And Prepares All Students For Success In A Dynamic, Global Environment. One Of The Prerequisites For Meeting This Goal Is To Ensure That All Schools Meet The Dodea Standard For Providing Safe, Secure, And Well-managed Environments That Focus On Student Achievement. Dodea Supports Its Field Facility Organizations By Providing Standardized Tools And Consistent Performance Metrics To Assist Them In Their Management Of Facility Assets. requirement Description: maintenance Services Are Required To Maintain A Safe, Healthy, And Sanitary School Environment For All Faculty And Students Within Dodea. The Government Seeks To Provide A Full-service Contract To Support All Operational, Management, And Preventative Maintenance To Ensure That Dodea School Assets Are Managed In Accordance With The Objectives And Standards Outlined Within This Performance Work Statement (pws). Therefore, This Requirement Calls For Continuous Effort On The Part Of The Contractor To Ensure That The Safety And Functionality Of All Dodea Facilities Are Maintained Throughout The Life Of The Contract. scope Of Work. The Contractor Shall Provide All Management, Personnel, Labor, Equipment, Tools, Vehicles, Materials, Supervision, Subcontracts, Transportation, Other Items/services Necessary To Perform All Operations, Inspections, Technical Support, And Facility Management Support Tasks And Functions For All Dodea Facilities As Defined In The Pws. The Contractor Shall Conduct Building And Facility Surveys, Condition Assessments, Data Collection, Reporting, And Database Management (planning, Documenting, Tracking, And Reporting Data/findings). Work Shall Be Performed And Documentation Shall Be Maintained To The Standards Set Forth In This Contract, The Asbestos Hazard Emergency Response (ahera), And All Other Applicable Codes And Regulations To Ensure Full Compliance With Applicable Codes And Standards. The Contractor Will Be Required To Provide And Manage A Full-service Fam Program For All Dodea Installations. The Major Elements Of The Services Required Include: 1. Asbestos Hazard Emergency Response (ahera) Inspections And Reports 2. Facility Condition Assessment (fca) Reports (no Remediation Services) 3. Facility Utilization Survey (fus) Drawings And Database Monitoring/updates 4. Real Property Inventory (rpi) Reports, Reconciliation, Tech Support/database Management, Mitigation And Tracking. 5. Database Management, Maintain A Database For All Data Collected Under This Contract. 6. Transition-in/out. period Of Performance: base Year Plus Four (4) One (1) Year Option Periods. place Of Performance: dodea Has Approximately 700 Buildings That Accounts For Approximately 20m Gross Square Feet In The Continental United States And Outside The Continental United States. Dodea Requires Field Assessments On A Region Per Year Which Is About One Third Of The Portfolio Inventory. sources Sought: the Anticipated North American Industry Classification System Code (naics) For This Requirement Is 541620 – Environmental Consulting Services, With The Corresponding Size Standard Of $19.0 M. This Sources Sought Synopsis Is Requesting Responses To The Following Criteria From All Sources That Can Provide The Required Services Under The Naics Code. If An Alternative Naics Code Is More Appropriate, Please Provide Recommended Codes With Description And Rationale In Your Response. the Responder Is To Provide Answers To The Following Questions: • Do You Have An Accounting System? Date Of Last Audit? Who Performed? Determined Adequate/inadequate? • Are You Interested In: Prime Contract? Teaming To Include Joint Venture? Subcontractor Opportunities? • Please Provide A Listing Of All Active Government-wide Ordering Contracts Currently Held By Your Company That May Accommodate The Scope Of This Requirement. Provide The Contract Number, The Name Of The Contractor, And The Current Period Of Performance Of The Contract. • Include Additional Details That Are Not Already Requested Based On The Constraints Of The Information Request. • Provide Relevant Details Of The Same Or Similar Service Offered Or Made To The Government Entities In The Last Three (3) Years. Relevant Details To Dodea’s Proposed Acquisition Should Include, But Not Be Limited To: o Information Regarding The Size And Length Of The Effort; o Ability To Perform As A Prime Or Subcontractor; o Customary Practices (warranty, Financing, Discounts, Contract Types, Etc.) Under Which The Sale Of The Service(s) Is Made; o Any Security Details; the Responder Is Invited To Provide Information And Recommendations For Fashioning This Proposed Acquisition. Recommendation Areas May Include: • Information Regarding Performance Requirements - What To Evaluate, How To Evaluate, And The Performance Standards With Acceptable Quality Levels That Are Similar To Those Utilized In Similar Efforts. • What Is A Recommended Type Of Contract For This Type Of Service Broken Out By Clin (e.g. Ffp, Fpif Cpif)? • Anticipated Contract Terms & Conditions, Incentives, Variations In Delivery Schedule, Price And/or Cost Proposal Support • Evaluation Criteria submission Details: interested Parties Are Directed To Respond To This Rfi With A White Paper In Microsoft Word For Office Or Compatible Format And Shall Not Exceed 25 Pages. Pages Shall Have A One (1) Inch Margin On All Sides. Font Type Shall Be Times New Roman 12 Point And Include The Following: 1) Company Information (name, Physical/mailing Address, Unique Entity It, Cage Code, Phone No., Website Address); 2) Company Point Of Contact (name Of Primary/alternate Pocs, Title, E-mail, Phone No.); 3) Description Of Principle Business Activity; 4) Naics Recommendation For This Procurement; 5) Business Size And Status; 6) Tailored Capability Statements Addressing The Particulars Of This Effort, With Appropriate Documentation Supporting Claims Of Organizational Staff Capability. If Significant Subcontracting Or Teaming Is Anticipated To Deliver Technical Capability, Address The Administrative And Management Structure Of Such Arrangements And Response To The Questions Above. vendors Who Wish To Respond To This Sources Sought Should Send Responses Via Email Nlt 1:00 Pm Eastern Standard Time (est) January 13, 2025 To Ms. Emani Gray At Emani.gray@dodea.edu. Interested Vendors Should Submit A Response That Demonstrates The Ability To Meet The Requirement As Listed In The Requirement Description Paragraph Above. disclaimer: this Sources Sought Is For Informational Purposes Only. This Is Not A Request For Proposal. It Does Not Constitute A Solicitation And Shall Not Be Construed As A Commitment By The Government. Responses In Any Form Are Not Offers And The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. No Funds Are Available To Pay For Preparation Of Responses To This Announcement. Any Information Submitted By Respondents To This Technical Description Is Strictly Voluntary. proprietary Information And Trade Secrets, If Any, Must Be Clearly Marked On All Materials. All Information Received That Is Marked Proprietary Will Be Handled Accordingly. Please Be Advised That All Submissions Become Government Property And Will Not Be Returned.all Government And Contractor Personal Reviewing Responses Will Have Signed Non- Disclosure Agreements And Understand Their Responsibility For Proper Use And Protection From Unauthorized Disclosure Of Proprietary Information As Described 41 Usc 423. The Government Shall Not Be Held Liable For Any Damages Incurred If Proprietary Information Is Not Properly Identified.

Details: Description u.s. Customs And Border Protection (cbp) Is Seeking Information From Interested Vendors That Could Provide Specific Forensic Auditing Support In Automation Of The Forensic Auditing Process And Forensic, Analytical, And Training Consulting Service Requirements For Trade Regulatory Audit Directorate (tra). Project Scope Shall Include Professional Consulting Services Supporting All Work Processes Necessary For The Successful Creation, Modification, Implementation, Monitoring, And Management For Tra’s Forensic Support; Improved Analytics And Automation; And Forensic Training And Transformation For Tra Personnel To Obtain And Deploy These Mission Critical Capabilities. The Four (4) Key Task Areas Are: Forensic Enforcement, Improved Analytics, Process Automation, And Forensic Training & Transformation. the Attached Draft Statement Of Work (sow) Describes The Requirements For The Contractor Who Shall Provide All Support Services Outlined In The Draft Sow. Should The Government Prioritize And Fund This Work In The Future, The Government Will Further Define Specific Tasks And Deliverables In A Subsequent Formal Solicitation. this Is A Request For Information/sources Sought Announcement. It Is For Informational Purposes Only. A Solicitation Is Not Being Issued. This Request For Information (rfi) From Industry Will Allow The Government To Identify Interested Sources Capable Of Meeting All Requirements. The Information Sought Will Be Used For Planning Purposes Only. this Is Not A Request For Proposal (rfp). The Government Will Not Award A Contract On The Basis Of This Rfi. The Government Will Not Pay For Any Information Submitted By Respondents. All Proprietary Or Sensitive Corporate Information Shall Be Clearly Marked. this Rfi In No Way Obligates Or Commits The Government To Acquire Any Product Or Service. There Shall Be No Basis For Claims Against The Government As A Result Of Information Submitted In Response To This Rfi. background u.s. Customs And Border Protection (cbp) Plays A Critical Role In Defending America’s Economic Security By Enforcing Current Trade Laws And Implementing New Measures To Protecting American Industry And Creating Jobs By Leveling The Playing Field For American Businesses. Cbp Remains The Agency That Collects The Second Largest Amount Of Revenue For The Federal Government And Is Committed To Its Dual Role Of Trade Facilitation And Revenue Protection. Our Trade Operations Are Focused On Creating A Level Playing Field For American Businesses, Protecting Consumers And Reducing Trade Costs. the Office Of Trade (ot) Consolidates The Trade Policy, Program Development, And Compliance Measurement Functions Of Cbp Into One Office. Ot Provides Uniformity And Clarity For The development Of Cbp’s National Strategy To Facilitate Legitimate Trade And Manages The Design And Implementation Of Results-driven Strategic Initiatives For Trade Compliance And Enforcement. Ot Also Directs National Enforcement Responses Through Effective Targeting Of Goods Crossing The Border As Well As Strict, Swift Punitive Actions Against Companies Participating In Predatory Trade Practices. Through Coordination With International Partners And Other U.s. Government Agencies, Ot Directs The Enforcement Of Intellectual Property Rights, The Identification Of Risks To Detect And Prevent The Importation Of Contaminated Agricultural Or Food Products, And The Enforcement Of Free Trade Agreement Eligibility. ot Provides The Legal Tools To Promote Facilitation And Compliance With Customs, Trade, And Border Security Requirements Through The Issuance Of All Cbp Regulations, Legally Binding Rulings And Decisions, Informed Compliance Publications, And Structured Programs For External Cbp Training And Outreach Concerning International Trade Laws. Ot Implements A Risk-based Audit Program To Respond To Allegations Of Commercial Fraud And To Conduct Corporate Reviews Of Internal Controls To Ensure Importers Comply With Trade Laws And Regulations. tra Directorate Is Comprised Of Field-based Operations And Headquarters-based Operations. The Field-based Operations Are Primarily Focused On The Execution Of The National Annual Audit Plan Within Each Of The Twelve (12) Field Offices. The Headquarters-based Operations Include Various Planning, Policy, Oversight, Special Projects, And Resource Management Activities Within Three (3) Headquarters Divisions. requested Information cbp Seeks Information From Vendors That Can Provide Commercially Available Capabilities And Services To Satisfy The Attached The Attached Draft Sow Requirements. Citing Two (2) Examples, Please Describe Your Capabilities And Experience Meeting Requirements Similar In Scope And Complexity To The Requirements Of The Attached Draft Sow. In Addition To A Description Of Capabilities And Experience, Cbp Seeks Responses To The Following Questions: what Is Your Experience Level And Expertise Supporting Complex Federal Forensic Investigations Involving Trade-based Money Laundering, Illegal Narcotics Trafficking, And Import/export Trade-based Crimes? what Forensic Experience Do You Have With Federal Import Trade-based Knowledge For Global Industries Involved In Us Cross-border Trade? what Specific Foreign Countries’ Trade Processes, Legal Frameworks, And Foreign Forensic Programs Do You Have Expertise With Specific Countries? in Which Specific Us Trade Priority Issues Do You Have Forensic Auditing Experience? in Which Specific Emerging Trade Issues Like Forced Labor, Green Trade Do You Have Forensic Auditing Experience? what Resources Would You Be Able To Provide That Have Data Analytic Experience With Federal Law Enforcement, Or Federal Forensic Auditing Experience? is Your Existing Familiarity Or Expertise Level With Cbp Auditing Standards? what Is Your Existing Familiarity Or Expertise With Federally Held Data Use To Support Forensic Audit Investigations? what Is Your Existing Familiarity Or Expertise With Commercial Data Sets Related To Import/export Domain Data And Cbp Domain Data? what Is Your Existing Familiarity Or Expertise With Commercially Available Entity Data And Linking Information Such As A Business Name, Address Or Other Identifier To Import/export Cryptocurrency Activity? what Is Your Existing Experience Developing, Documenting, And Tracking Chain Of Custody Of Evidentiary Documentation To Support Forensic Audit Investigations? what Is Your Existing Experience Training Audit Specialists In Conducting Highly Complex Forensic Audit Investigations, Developing Evidence, Link Analysis, Acquiring New Data Sets, Integrating, And Interpreting Data Patterns, While Aligning Research And Audit Investigative Efforts In Support Of Protecting U.s. National Economic Interests? note: “existing” Is Defined As Resources Currently On Staff In Your Company. response Format And Limits interested Parties Should Submit A Written Response, No More Than Eight (8) Pages In Length Using One (1) Inch Margins With Times New Roman Font Size 12, That: demonstrates The Respondent’s Ability To Meet Or Exceed The Attached Draft Sow Requirements; addresses Each Of The Questions; provides The Company Name, Company Physical/mailing Address, Point Of Contact (poc) Name, Poc Phone Number, Poc E-mail, Business Size, Unique Entity Identifier (uei), And Available Contracting Vehicles; cost/price Estimates; any Other Pertinent Information Such As Assumptions Made Relating To The Ability To Satisfy Specific Requirements Or Questions Regarding Ambiguous Or Poorly Defined Requirements; And all Responses Shall Be Submitted Electronically (adobe Pdf Format). Responding To This Rfi Is Not A Pre-requisite To Bid On A Subsequent Rfp. If A Rfp Is Issued, Responses May Include Links To Available Product Demonstration Websites Or Videos. responses Are Due No Later Than 10am Et, Wednesday, January 15, 2025. Responses Shall Be Submitted Via E-mail To The Contracting Officer, Jared.a.tritle@cbp.dhs.gov . summary this Is Only A Request For Information (rfi). The Information Derived From This Rfi Will Assist Cbp In Identifying Sources That Can Satisfy The Requirements Of The Attached Draft Sow. The Information And Specifications Provided In The Rfi Are Subject To Change And Are Not Binding On The Government. Cbp Has Not Made A Commitment To Procure Any Of The Items Presented, And Release Of This Rfi Should Not Be Construed As A Commitment Or Authorization To Incur Cost For Which Reimbursement Would Be Required Or Sought. All Submissions Become Government Property And Will Not Be Returned.

Details: Description Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-231 Bidding December 10, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Seven (7) Months Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 1 1 Lot Various Materials For Smart City Command Center 15,500,000.00 22 Unit 16 Port Poe Switch - 16 Port Poe Switch - Cpu Core Count 1 Cpu Nominal Frequency 800 Mhz Size Of Ram 256 Mb Storage Size 16 Mb Storage Type Flash Mtbf Approximately 200'000 Hours At 25c Cooling Type Passive Poe-out Ports Ether1-ether16 Poe Out 802.3af/at Max Out Per Port Output (input 18-30 V) 1.1 A Max Out Per Port Output (input 30-57 V) 0.6 A Max Total Out (a) 2.8a (18v-30v) & 1.4a (48v-57v) X2 10/100/1000 Ethernet Ports 16 Number Of 1g Ethernet Ports With Poe-out 16 Sfp+ Ports 2 Certification Ce, Eac, Rohs Ip Ip54 Warranty ：1 Year 88 Unit Adjustable Stainless Steel Strapping Band - Adjustable Stainless Steel Strapping Band - Material: Stainless Steel 304 Width: 1/2 Inch Thickness: 0.5 Mm Length: 30 Meters 44 Unit Cable Loop Holder - Cable Loop Holder - Galvanized Steel Pole Mountable 4 Branches At Least 400mmx400mm 1 Box Cat6 Utp Pure Copper Outdoor Cable - Cat6 Utp Pure Copper Outdoor Cable - Cat6 Utp Pure Copper Outdoor Cable 40 Unit Cctv Channel License - Cctv Channel License - Single Anpr Camera Connection For Use With Central Software Warranty ：perpetual Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 1 Of 12 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-231 Bidding December 10, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Seven (7) Months Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 40 Unit Cctv Lpr Camera - Cctv Lpr Camera - Camera Image Sensor 1/1.8″ Progressive Scan Cmos Max. Resolution 2688 × 1520 Min. Illumination Color: 0.001 Lux @ (f1.2, Agc On) Shutter Time 1/25 S To 1/100,000 S Day & Night Ir Cut Filter Lens Focal Length & Fov 2.8-12 Mm: Horizontal: 113.5° To 39°, Vertical: 58.4° To 22.7°, Diagonal: 141.3° To 44.3° Aperture 2.8-12 Mm: F1.38, 8-32 Mm: F1.7, 10-50 Mm: F1.7 Illuminator Built-in Supplement Light Type Ir Light Built-in Supplement Light Range Up To 40 M Ir Wavelength 850 Nm Video Main Stream 50 Hz: 25 Fps (2688 × 1520, 1920 × 1080, 1280 × 760, 704 × 576, 352 × 288) 60 Hz: 30 Fps (2688 × 1520, 1920 × 1080, 1280 × 760, 704 × 576, 352 × 288) Sub-stream 50 Hz: 25 Fps (1920 × 1080, 1280 × 760, 704 × 576, 352 × 288) 60 Hz: 30 Fps (1920 × 1080, 1280 × 760, 704 × 576, 352 × 288) Video Compression H.264 And H.265 Encoding Main Stream: H.265/h.264/mjpeg Sub-stream: H.265/h.264/mjpeg Video Bit Rate 32 Kbps To 16 Mbps Protocols Tcp/ip,icmp,http,https,ftp,sftp,dhcp,dns,ddns,rtp,rtsp,rtcp,ntp,smtp,snmp,igmp,qos,ipv4/ipv6,udp,ssl/tls,isup,arp,802.1x Simultaneous Live View Up To 6 Channels Road Traffic And Vehicle Detection Coverage Up To 3 Lane(s) Smart Function Traffic Flow Detection：average Speed, Traffic Flow, Queuing Length, And Traffic Status Incident Detection: Congestion, Stopped Vehicle, Lane Change, Wrong-way Driving, Speeding, Low-speed Driving Capture Speed Range 5 To 120 Km/h Blocklist And Allowlist Max. 50000 Records Warranty ：2 Years Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 2 Of 12 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-231 Bidding December 10, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Seven (7) Months Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 5 Unit Cctv Nvr - Cctv Nvr - Supports Redundant Power Supply To Improve The System Stability Supports Hdd Hot Swap With Raid0, Raid1, Raid5, Raid 6, And Raid10 Storage Scheme Configurable. Either Normal Or Hot Spare Working Mode Is Configurable To Constitute An N+1 Hot Spare System. Supports Some Specialist Cameras, Including People Counting Camera/anpr (automatic Number Plate Recognition) Camera/fisheye Camera Supports Video Analytic Functions Such As Vehicle Detection, License Plate Recognition --video & Audio Input -ip Video Input 128-ch -incoming/outgoing Bandwidth 576 Mbps/512 Mbps -incoming/outgoing Bandwidth (raid Mode) 576 Mbps/512 Mbps -tls Outgoing Bandwidth 128 Mbps, Or 64 Mbps (when Raid Is Enabled) --video & Audio Output -protocol Hikvision, Acti, Arecont, Axis, Bosch, Brickcom, Canon, Hunt, Onvif (version 2.5), Panasonic, Pelco, Rtsp, Samsung, Sony, Vivotek, Zavio --video & Audio Output -hdmi Output Two Independent Hdmi Outputs Of 4k Resolution. Resolution: 4k (4096 × 2160), 4k (3840 × 2160)/30hz, 2k (2560 × 1440)/60hz, 1080p (1920 × 1080)/60hz, Uxga (1600 × 1200)/60hz, Sxga (1280 × 1024)/60hz, 720p (1280 × 720)/60hz, Xga (1024 × 768)/60hz -vga Output 1-ch. Resolution: 1080p (1920 × 1080)/60hz, Uxga (1600 × 1200)/60hz, Sxga (1280 × 1024)/60hz, 720p (1280 × 720)/60hz, Xga (1024 × 768)/60hz --video & Audio Decoding -decoding Format H.265, H.265+, H.264, H.264+, Mpeg4, Mjpeg (for Hikvision Ip Camera Only) -video Resolution 32 Mp/24 Mp/12 Mp/8 Mp/7 Mp/6 Mp/5 Mp/4 Mp/3 Mp/1080p/uxga/720p/vga/4cif/dcif/2cif/cif/qcif *: 32 Mp And 24 Mp Is Only Available For Channel 1 To 4 When Ultra Hd Resolution Mode Is Enabled -synchronous Playback Up To 16 Channels -capability 1-ch@32 Mp (8160 × 3616, 30 Fps)/5-ch@8 Mp(30 Fps)/10-ch@4 Mp(30fps)/20-ch@1080p(30 Fps)/40-ch@720p(30 Fps) *: The Length Or Width Of Camera Resolution (each Track) Cannot Exceed 4096 Pixels --hdd -interface 16 Sata Interfaces Supporting Hot-plug -capacity Up To 10 Tb For Each Hdd -storage Extension 1 × Esata Interface, 2 × Mini Sas Interface (optional) --raid Raid Type Raid0, Raid1, Raid5, Raid 6, And Raid10 --network Management -protocol Ipv6, Https, Upnp, Snmp, Ntp, Sadp, Smtp, Nfs, Iscsi, Pppoe, Ddns Network Interface 4, Rj45 10m/100m/1000m Self-adaptive Ethernet Interface --external Interface -usb Interface Front Panel: 2 × Usb 2.0; Rear Panel: 2 × Usb 3.0 Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 3 Of 12 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-231 Bidding December 10, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Seven (7) Months Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) -alarm Input/output 16/8 --general -power Supply 100 To 240 Vac, 50 To 60hz, 5 A -fan Redundant Dual Ball Bearing Fan; Speed Adjustable -consumption (without Hdd) ≤ 140w -warranty ：2 Years 1. Responsibility Of The Supplier 1.1 Supply And Delivery Of Ict Equipment 1.2 Inventory Of The Items Deliverd With The Following Details 1.2.1 Brand 1.2.2 Model 1.2.3 Serial Number 1.2.4 Quantity 1.3 The Bidder Must Ensure That All Components Delivered Will Be Brand New 1.4 All Equipment Provided Must Be Compatible And Working With The Cctv System As A Whole 1.5 Materials And Equipment Delivery Within 90 Days 1.6 Cctv Contractor Should Have Manufacture Authorization And Certification. 1.7 Contractor Must Have A Valid Iso 9001:2015 Certificate 1.8 All Equipment Provided Must Be Capable/compatible To Interconnect With The Existing Systems Located At The Smart City Command Center (sc3) To Be Viewable And Configurable In The Sc3. 80 Unit Cctv Nvr Surveillance Hard Drive - Designed And Built To Handle Heavy Surveillance Workloads Advanced Vibration Management Capacity 10tb Interface Sata 6 Gb/s Max. Sustained Transfer Rate Od (mb/s) 250mb/s Cache (mb) 256 Tarnish Resistant Yes Mtbf 1,500,000 Hr Warranty ：2 Years 15 Set Command Center Desktop Computer - Minimum Specifications: Operating System: Microsoft Windows 11 Pro 64bit Processor: Intel Core I5 14600k Turbo Frequency 5.3ghz 14 Cores/20 Threads, 24mb Cache, Socket Lga1700 Cpu Air Cooler: Twin Tower Cpu Air Cooler, With 6x6mm Sintered Copper Heatpipes, With 2x140mm Fans Motherboard: B760 Chipset, Lga1700 Socket, Ddr5 4xdimm Matx Form Factor Ram: Ddr5 5600mhz, 32gb (dual 2x16gb) Memory Modules Gpu: Rtx 4070, 12gb Gddr6/gddr6x Ssd: 512gb Capacity R/w 560/520 Mb/s 3d Tlc Ssd 2.5 Inch Form Factor Hdd: Capacity 2tb, 7200 Rpm, 256mb Cache, 3.5 Inch Form Factor Power Supply: 1000 Watts, 80 Plus Gold Certified, Fully Modular, With 120mm Smart Hydraulic Bearing (hyb) Fan, With Active Pfc, Mtbf: >100,000 Hours Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 4 Of 12 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-231 Bidding December 10, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Seven (7) Months Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) Case: Tempered Glass Mid Tower Atx Case With At Least 3 Fans Monitor: 2 Units, 24 Inches, Resolution: Fhd 1920 X1080, Aspect Ratio:16:9, Brightness: 250cd, Color Gamut Ntsc 72%, Refresh Rate: 100hz, Response Time: 5ms(gtg), Connectivity: 1x Hdmi 1x Displayport Keyboard: Usb Connectivity, With Backlight, Rubber Dome, Usb Connectivity, Multi-key Anti-ghosting, Polling Rate: 1000hz, Cable Type: Attached, Braided, Cable Length: 5.9ft Mouse: Usb Connectivity, Optical Sensor, Mouse Button Durability: 30m L/r Click, Cable: 1.8m Tangle Free Rubber, Dpi: 12,400 Dpi Ups: Max Configurable Power (watts) 650 Watts / 1.2kva, At Least 3 Universal Socket Warranty ：2 Years 2 Unit Command Center Field Laptop - Command Center Field Laptop - Intel Core I7-13700hx Processor (30 Mb Smart Cache, 2.1 Ghz Performance-core With Turbo Boost Max Technology 3.0 Up To 5.0 Ghz, Overclock Capable) 1x 16gb Of Ddr5 4800mhz System Memory, Upgradable To 32 Gb Using Two Sodimm Modules 2x 512gb Nvme Ssd; Total Of 1tb 16 Display With Ips (in-plane Switching) Technology, Wqxga 2560 X 1600, High-brightness (500 Nits) Nvidia® Geforce Rtx 4060 With 8 Gb Of Dedicated Vram Warranty ：2 Years 2 Unit Command Center Printer - Command Center Printer - A3 Wi-fi Duplex All-in-one Ink Tank Printer Print Speed Of Up To 25.0 Ipm Prints Up To A3+ (for Simplex) Automatic Duplex Printing Ultra-high Page Yield Of 7,500 Pages (black) And 6,000 Pages (colour) Wi-fi, Wi-fi Direct, Ethernet Printer Type: Print, Scan, Copy, Fax With Adf Minimum Ink Droplet Volume: 3.8 Pl Print Direction: Bi-directional Printing Nozzle Configuration:800 X 1 Nozzles Black, 256 X 1 Nozzles Per Colour (cyan, Magenta, Yellow) Maximum Resolution: 4800 X 2400 Dpi Automatic 2-sided Printing: Yes (up To A3) Print Speed: Photo Default - 10 X 15 Cm / 4 X 6 " *1: Approx. 43 Sec Per Photo (border) / 52 Sec Per Photo (borderless)*2 Draft, A4 (black / Colour): Up To 32.0 Ppm / 22.0 Ppm *2 Iso 24734, A4 Simplex (black / Colour): Up To 25.0 Ipm / 12.0 Ipm *2 Iso 24734, A4 Duplex (black / Colour): Up To 16.0 Ipm / 9.0 Ipm *2 Iso 24734, A3 Simplex (black / Colour): Up To 13.5 Ipm / 6.0 Ipm *2 Iso 24734, A3 Duplex (black / Colour): Up To 10.0 Ipm / 5.0 Ipm *2 Warranty ：1 Year Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 5 Of 12 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-231 Bidding December 10, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Seven (7) Months Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 1 Unit Command Center Video Wall Controller - Command Center Video Wall Controller - Interface Alarm In Alarm Out 8-ch Alarm Out 8-ch Alarm In Serial Interface Rs-232 (rj45) × 1, Rs-485 × 1 Usb Interface Usb 2.0 × 2 Network Interface Rj45 × 2, 10 M/100 M/1000 Mbps Self-adaptive Ethernet Interface Optic Interface × 2 100 Base-fx/1000 Base-x Supports Optoelectronic Self-adaptation Video Walls 1 Video Wall Size <= 8 Layers Per Screen 1080p × 3 Or 4k × 1.5 Layers Layers Per Screen × Output Interface(s) Split Window Yes Scene Auto-switch Delay 3s Auto-switching Plans Support 256 Auto-switching Plans Max. Input Resolution 4k Audio Encoding Format G722.1, G711u, G711a, Aac-lc Video Output Interface Type Hdmi 1.4 Video Output Interface(s) 8 Video Decoding Resolution Up To 32 Mp Warranty：2 Years 8 Unit Command Center Video Wall Display - Command Center Video Wall Display - Display Panel Diagonal Size Class 55 Measured 54.6 Resolution 3,840 X 2,160 (16:9) Brightness (typ.) 700 Nit Orientation Landscape/portrait Haze 25% Contrast Ratio (typ.) 4,000:1 Type Va Active Display Area 1,209.6 (h) X 680.4 (v) Pixel Pitch (mm) 0.315 X 0.315 Color Gamut Ntsc 72% Operation Hour 24/7 Connectivity / Sound Input Video Dp 1.2 (1), Hdmi 2.0 (3) Audio N/a Usb Usb 2.0 X 2 Tuner N/a Output Audio Stereo Mini Jack Wifi / Bt O/o External Control Rs232c (in/out), Rj45 Speaker 10w 2ch Mechanical Spec Dimension (mm / In.) With Heavy Duty Full Motion Tv Wall Mount Warranty ：3 Year 44 Unit Din Rail Mount - Din Rail Mount - 35mm At Least 7.5mm Depth Aluminum 22 Unit Electrical Box Enclosure - Electrical Box Enclosure - Electricalbox Panel Box Metal Enclosure(ip66, Nema 4 & 12) 300x250x150 Mm W/ 2 Fans And Fan Filter With Pole Mount Bracket X1 Molded Case Circuit Breaker Mccb30a 220v 2 Pole Din Rail Mount Type X1 Residual Current Circuit Breaker 63a 220v With Grounding/earthing 2 Pole Din Rail Mount Type X1 Grounding Bus Bar With Insulator X1 Din Rail Mount Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 6 Of 12 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-231 Bidding December 10, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Seven (7) Months Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 40 Roll Fiber Optic Connectivity - Fiber Optic Connectivity - Fiber Optic Connectivity 2.0 Kms 4 Core Fiber Optic Cable Maintenance Of Outside And Inside Plant Equipment To Smart City Command Center For 1 Year 1 Unit Fiber Optic Fusion Equipment - Fiber Optic Fusion Equipment - Fiber Alignment Core/cladding Motor Number 6 Motors Splicing Time 5s Heating Mode 15s, Can Be Customized According To The External Environment Fiber Type Single-mode Fiber (smf/g.652), Bif/g.657); Suitable For Single Mode, Multi-mode, Bare Fiber, Tail Fiber, Drop Cable, Jumper, Invisible Fiber Fusion; The Cladding Diameter 80-150μm Splicing Loss 0.02db（sm）、0.01db（mm）0.04db（ds/nzds） Splicing Mode Automatic Focusing Core Alignment, Conventional/high Precision Welding Splicing Way Automatic, Semi-automatic Opm Wavelength: 850nm、1300nm、1310nm、1490nm、1550nm、1625nm、980nm、1270nm、1577nm、1650nm/measurement Range: -50+26dbm Absolute Error: <0.3db (-50dbm ~+3dbm Range) Battery Capacity 7800mah Large Capacity Lithium Battery Charging Time ≤3.5; It Can Continuously Weld And Heat About 260 Cores Magnification 320x (x Or Y Axis Single Display) 200x (x And Y Axis Dual Display) Fiber Diameter Coating Diameter: 80-150μm/coating Diameter: 100-1000μm Cutting Length Coating Layer 250μm Below: 8-16mm/coating Layer 250-1000μm: 16mm Heat Shrink Tube 60mm、50mm、40mm、25mm Tensile Testing Standard 2n Display 5 Inch Tft Color Display Screen Return Loss Better Than 60 Db Product Protection Waterproof, Dustproof And Fall Proof Warranty ：1 Year 44 Unit Fiber Patch Cord Single-mode 9/125 Sc/upc To Lc/upc - Fiber Patch Cord Single-mode 9/125 Sc/upc To Lc/upc - Fiber Patch Cord Single-mode 9/125 Sc/upcto Lc/upc3 Meter 44 Unit Fiber Patch Cord Single-mode Sc/upc To Sc/upc - Fiber Patch Cord Single-mode Sc/upc To Sc/upc - Fiber Patch Cord Single-mode Sc/upcto Sc/upc3 Meter 45 Unit Gigabit Rj-45 Surge Protector Arrester - Gigabit Rj-45 Surge Protector Arrester - Protects Your Ethernet Device From The Damage Of Lightning & Surge Gigabit 10/100/1000 Specification: Connectors: Rj-45 Material: Shielded Aluminum Alloy 44 Unit Grounding Bus Bar With Insulator - Grounding Bus Bar With Insulator - Grounding Bus Bar With Insulatorat Least 8 Way At Least 8x12mm² 2 Roll Grounding Cable Pure Copper Wire - Grounding Cable 4mm Pure Copper Wire Round Solid 100m Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 7 Of 12 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-231 Bidding December 10, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Seven (7) Months Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 22 Unit Grounding Rod And Clamp Copper Plated - Grounding Rod And Clamp Copper Plated - "grounding Rod Full Set - (1pc Grounding Rod + 1 Pc Grounding Clamp) Size: Approximately 50cm Length X 0.9cm Diameter" 22 Unit Heavy Duty Surface Type Extension Outlet 4 Gang - Heavy Duty Surface Type Extension Outlet 4 Gang - Heavy Duty Surface Type Extension Outlet 4 Gang 15 Amperes Capacity/ Maximum 3,750watts 1 Lot Installation, Integrations And Configuration Of Outside Plant Equipment - Installation, Integrations And Configuration Of Outside Plant Equipment - Installation, Integrations And Configuration Of All Outside Plant Project Equipment In Outside Project Sites Outside Of The Smart City Command Center 1 Lot Installation, System Integrations And Configuration Of All Inside Plant Project Equipment - Installation, System Integrations And Configuration Of All Inside Plant Project Equipment In The Smart City Command Center Such As The Hikcentral Camera License, Integration To Existing Hikcentral Software And Integration Of Existing Cctv Cameras Into New Nvr 22 Unit Iot Box Panelbox Metal Enclosure (ip66,nema4 & 12) 500x300x200mm W/ 2 Fans And Fan Filter With Pole Mount Bracket X1 Heavy Duty Surface Type Extension Outlet 4 Gang Terminal Block Distribution 2 Input 4 Output Push-in Type 40 Unit Lpr Camera Arm Mount - Gi Pipe Extension Arm 1.5-3 Meters 40 Unit Lpr Camera Memory Card - Product Capacity Covering 128g The Storage Mediumis Tlc Particles Long Reading And Writing Times, Which Can Meet More Than 1000 Cycles Optimized For Long Time On-board Video Recording, Offering More Stable Reading And Writing Experience Operating Voltage 2.7v~3.6v Compatibility Sd 6.1 Working Life 1,000 Cycles Storage Medium Tlc Speed Class Write/read Speed 64gb：up To 35/100mb/s 128gb：up To 70/100mb/s256gb：up To 90/100mb/s Durability 10,000 Insertion/removal Cycles Uhs-i Sdr104 Type Sdxc 40 Unit Lpr Camera Vertical Pole Mount - Vertical Pole Mounting Bracket Installed On The Cross Bar Galvanized Steel Sheet And Steel Material With Surface Spray Treatment Can Be Used For New Bullet Camera Outdoor Greycolo Must Be Compatible With Cctv Camera 22 Roll Metal Flexible Conduit 1 Inch - Metal Flexible Conduit 1 Inch 30 Meters Per Roll 44 Unit Molded Case Circuit Breaker Mccb 30a - Molded Case Circuit Breaker Mccb 30a 220v 2 Pole Din Rail Mount Type 22 Unit Molded Case Circuit Breaker Mccb 63a - Molded Case Circuit Breaker Mccb 63a 220v 2 Pole Din Rail Mount Type 22 Unit Poe Switch Power Supply - Power Supply 48v 2a 96w With Us Plug Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 8 Of 12 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-231 Bidding December 10, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Seven (7) Months Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 22 Unit Residual Current Circuit Breaker 63a 220v - Residual Current Circuit Breaker 63a 220v With Grounding/earthing 2 Pole Din Railmount Type 44 Unit Sfp+ Module Lc Connector Type - Gigabit Single-mode Wdm Bi-directional Sfp Module Spec: Lc Connector, Tx:1550nm/rx:1310nm, Single-mode, 20 Km 7 Roll Solidwire Awg#12 - Solidwire Awg#12 75m Per Roll Use For Termination Inside Iot Box 7 Roll Solidwire Awg#16 - Solid Wire Awg#16 75m Per Roll Use For Termination Inside Iot Box 66 Unit Terminal Block Distribution 2 Input 4 Output - Terminal Block Distribution 2 Input 4 Output Push-in Type This Is A Lot Bidding, Partial Bids Are Not Allowed Please Indicate Brands Of Offers And Attach Complete Technical Brochures In The Eligibility And Technical Proposal Please Indicate Unit Prices Of Offers In The Financial Proposal Bidders Must Possess Valid Mayor's/business Permit With A Relevant Line Of Business For Use Of Cmo Mitd Under Pr No. 1 Please Refer To Attached Terms Of Reference In The Associated Components Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature

Details: Contact Information|4|n711.9|bm4|7176054385|derek.j.ford5.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Report (combo)|n/a|tbd|n00104|tbd|tbd|see Schedule|tbd|n/a|n/a|tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| equal Opportunity (sep 2016)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (may 2024)|13|334412|750|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||| a. Electronic Submission Of Any Quotes, Representations, And Any Necessary Certifications Shall Be Accomplished Via An Email Directed To Derek.j.ford5.civ@us.navy.mil. b. General Requirements: Mil-std Packaging, Government Source Inspection, Fob Source, Cav Reporting. c. This Rfq Is For Repair. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractor's Written Acceptance Prior To Execution. Verify Nomenclature, Part Number, And Nsn Prior To Responding. d. Only A Firm-fixed (ffp), Not-to-exceed (nte) Or Estimated (est) Price For The Repair Of The Subject Item(s) Will Be Accepted. Quotes Limited To Test And Evaluation (t&e) Will Not Be Accepted. The Quoted Price Must Be For The Repairof The Item(s). e. Must Adhere To Iuid Requirements Of Dfars 252.211-7003 f. The Ultimate Awardee Of The Proposed Contract Action Must Be An Authorized Repair Source. Award Of The Proposed Contract Action Will Not Be Delayed While An Unauthorized Source Seeks To Obtain Authorization. g. The Government Is Requesting A Repair Turnaround Time (rtat) Of: ## ______ Days After Receipt Of Asset. repair Turnaround Time (rtat) Definition: The Resultant Contractual Delivery Requirement Is Measured From Asset Return To The Date Of Asset Acceptance Under The Terms Of The Contract. For Purposes Of This Section, Return Is Defined As Physical Receipt Of The f-condition Asset At The Contractor's Facility As Reflected In The Action Date Entry In The Commercial Asset Visibility (cav) System. In Accordance With The Cav Statement Of Work, The Contractor Is Required To Accurately Report All Transactions By The End Of The fifth Regular Business Day After Receipt And The Action Date Entered In Cav Must Be Dated To Reflect The Actual Date Of Physical Receipt. The Contractor Must Obtain Final Inspection And Acceptance By The Government For All Assets Within The Rtats Established In this Contract. please Note Freight Is Handled By Navy Cav Or Proxy Cav As Stated In Navsupwssfa24 Or Navsupwssfa25. throughput Constraint: Contractor Must Provide A Throughput Constraint For Eachnsn(s). Total Assets To Be Repaired Monthly After Initial Delivery Commences: _____/month (contractor Is To Fill In #). A Throughput Of "0" (zero) Per Monthreflects No Throughput constraint. induction Expiration Date: 365 Days After Contract Award Date. Any Asset Received After This Date In Days Is Not Authorized For Repair Without Bi-lateral Agreement Between The Contractor And Navsup Wss Contracting Officer. h. Important Note: reconciliation Price Reduction: any Asset(s) For Which The Contractor Does Not Meet The Required Rtat Will Incur A Price Reduction Per Unit/per Month The Contractor Is Late. However, Any Delay Determined To Be Excusable (e.g. Government Delay) Will Not Result In A Price Reduction. If The contractor Does Not Meet The Required Rtat Due To Inexcusable Contractor Delay, The Contracting Officer Will Implement The Aforementioned Price Reduction Via A "reconciliation Modification" At The End Of The Contract Performance. Price Reductions Made pursuant To This Section Shall Not Limit Other Remedies Available To The Government For Failure To Meet Required Rtats, Including But Not Limited To The Government's Right To Terminate For Default. in Reference To The Above Important Note, The Contractor Provides The Followingprice Reduction Amount Per Unit/per Month The Contractor Does Not Meet The Rtat: $___________, Up To A Maximum Of: $__________. (vendor Is To Fill In Amount) i. Your Quote Must Include The Following Information For Justification Purposes: - Repair Unit Price ________________ - Total Price________________ - Repair Turnaround Time (rtat) _____________ Days - New Unit Price ______________ note: If You Are Not Quoting The Government's Requested Repair Turnaround Time (rtat) Or Sooner, You Must Provide Your Company's Capacity Constraints Below: ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ - T&e Fee/price (if Asset Is Determined Br/ber): If An Item Is Determined Br, And The Contractor Provides Documentation That Costs Were Incurred During Evaluation And Determination Of Br/ber, The Contracting Officer Will Negotiate A Reduced Contract Price, Not-to exceed (nte) $___________associated With The Repair Effort To Reflect The Br Status Of The Equipment. - The T&e Fee (if Asset Is Determined Br/ber) Was Determined Based On: ____________________________________________________________________ ____________________________________________________________________ - Award To Cage:________ - Inspection & Acceptance Cage, If Not The Same As Award To Cage: _________ - Facility/subcontractor Cage (where The Asset Should Be Shipped To), If Not Same As Award To Cage. __________ - Facility/subcontractor Or Packaging Facility Cage (where The Asset Will Be Shipped From), If Not The Same As Award To Cage. ________ - Cost Breakdown Requested, Including Profit Rate (if Feasible). - Quote Expiration Date _______________________ (min Of 90 Days Is Requested). - Delivery Vehicle (if Delivery Order Requested) (if Your Company Has A Currentboa/idiq, For Example) Accelerated Delivery Is Encouraged And Accepted Before The Delivery Date(s) Listed In The Schedule. ^^ \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Repair And The Contract Quality Requirements For The Printed Circuit Boa . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Printed Circuit Boa Repaired Under This Contract/purchase Order Shall Meet The Operational And Functional Requirements As Represented By The Cage Code(s) And Reference Number(s) Listed Below. All Repair Work Shall be Performed In Accordance With The Contractors Repair/overhaul Standard Practices, Manuals And Directives Including But Not Limited To Drawings, Technical Orders, Manufacturing Operations, Tooling Instructions, Approved Repair Standards And Any Other contractor Or Government Approved Documents Developed To Provide Technical Repair Procedures. cage___ref. No. ;53711 8566237-2; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 4.4 Inspection/testing Repaired Items - The Contractor Shall Perform All Inspection And Testing Requirements As Specified In The Original Manufacturer's Specifications And Drawings. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.3 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer.

Details: Works Contract for the execution of 1)Improvement estimate for replacement of deteriorated 6no 8mtr PSC pole at loc FI/19, 20&49 and FII/2,4&5 in Simon Nagar SS II 250 KVA under Asaripallam Section.2)Improvement estimate for replacement of deteriorated 5no 8mtr PSC pole at various locations under Asaripallam Section. 3)Eos to 1no LTCT SC to The Principal Commissioner of Income Tax at Door No.329 in Guest House SS I 500 KVA and proposed 1no 250 KVA DT under Asaripallam Section. 4)Eos to 1no TYSY to Tmy.Ramani Kannan under Asaripallam Section. 5)Improvement estimate for replacement of 6nos damaged 8mts PSC pole at loc.FI/10 in TKM SS V & FII/1 in TKM SS VIII, FI/10 in Pambanvilai SS I, FII/12 in Thoppoor SS II, FII/12,13 in Ottayalkudy under Asaripallam Section. 6)Improvement estimate for replacement of 7nos damaged 8mts PSC pole at loc.FI/8,9 in Thoppoor SS IV, FII/14,15 in Vembanoor SS VII, FI/13 in Paruthivilai Channelkarai SS under Asaripallam Section.7)Improvement estimate for replacement of deteriorated 4no 9mtr PSC pole at loc. FII/2 in Thammathukonam SS IV & FI/9 in Asaripallam SS I, FI/7 in Charlespuram SS I, FI/2 in Vembanoor SS IV under Asaripallam Section. 8)Improvement estimate for replacement of deteriorated 6no 8mtr PSc in various locations under Asaripallam section.9)Improvement estimate for strengthening of conddctor from ACSR 7/2.11 to AAAC 7/2.50 at Keezhaperuvilai SS 250KVA under Parvathipuram Section. 10)Improvement estimate for replacement of aged conductor from ACSR 7/2.11 to AAAC 7/2.50 at Kottavilai SS 250 KVA under Parvathipuram Section. 11)Estimate proposed for 1no 63KVA DT to avoid overloading of North Kannakurichi SS 100 KVA in KV Kallukatti Feeder under Rajakamangalam Section. 12)Estimate for proposed 1nos Erumbukadu SS 25KVA DT under Rajakamangalam Section. 13)Estimate for proposed 2nos 25KVA DT to avoid overloading of Sreekrishnapuram SS II 100 KVA in Kallukatti Feeder under Rajakamangalam Section. 14)Eos to 11No Additional Street light SC no:R6-952 of The President, Village Panchayat, Melasankarankuzhi in Pambanvilai under Asaripallam Section. 15)Eos to 13Nos new street light SC to The President, Village Panchayat, Melasankarankuzhi in Pambanvilai under Asaripallam Section. 16)Eos to 13Nos new street light SC to The President, Village Panchayat, Melasankarankuzhi in Pambanvilai SS I 100KVA under Asaripallam Section. 17)Eos to 16nos new street light sc to The President, Village Panchayat, Melasankarankuzhi in Thoppoor SS I 100KVA under Asaripallam Section. 18)Eos to 7nos additional street light SC NO:R7-474 of The President, Village Panchayat, Melasankarankuzhi in Thoppoor SS IV 100KVA under Asaripallam Section. 19)Eos to 4nos additional street light SC NO:V7-123 of The President, Village Panchayat, Melasankarankuzhi in Vembanoor SS I 100KVA under Asaripallam Section. 20)Eos to 4nos additional street light SC NO:V2-323 of The President, Village Panchayat, Kelasankarankuzhi in Parappuvilai SS I 100KVA under Asaripallam Section. 21)Eos to 7nos additional street light SC NO:R8-631 of The President, Village Panchayat, Melasankarankuzhi in Pambanvilai SS VI 100KVA under Asaripallam Section. 22)Eos to 7nos additional street light SC NO:R2-529 of The President, Village Panchayat, Melasankarankuzhi in Pambanvilai SS VI 100KVA under Asaripallam Section. 23)Eos to 3nos additional street light SC NO:R6-951 of The President, Village Panchayat, Kelasankarankuzhi in Parappuvilai Chanelkarai SS III 100KVA under Asaripallam Section. 24)Eos to 6nos additional street light SC NO:V2-838 of The President, Village Panchayat, Kelasankarankuzhi in Vembanoor SS VIII 100KVA under Asaripallam Section.25)Eos to 1no non domestic to M/S Amzes trading Private limited under parvathipuram Section. 26)Eos to 1no new street light of 8 loc in Iswarya Garden to The Commissioner, Nagercoil Corporation under PVM Section. 27)Eos to 1no new street light of 7 loc in Iswarya garden to The Commissioner, Nagercoil Corporation under PVM Section. 28)Eos to 1no new st.light of 5 locs in Antony Street to The Commissioner, Nagercoil Corporation under PVM Section. 29)Eos to 1no new st.light of 4 loc in Thendral Nagar to The Commissioner, Nagercoil Corporation under PVM Section. 30)Eos to 1no Sc connection to Vijaya Chandra Suthakar under PVM Section.31)Improvement estimate for replacement of aged conductor from ACSR 7/2.11 to AAAC 7/2.50 at Vimal Nager SS 250KVA under PVM Section. 32)DCW estimate for 1no 9mtr PSC pole as per request of Thiru.Ganapathy at Kattayvilai under PVM Section. 33)DCW estimate for shifting of 1no 9mtr RCC pole as per request of Thiru.Kuttalam at Ramavarmpuram under PVM Section. 34)DCW estimate as per request to Thiru Freedahelan under PVM Section.35)DCW estimate for shifting of 1no 8mtr PSC as per the request of Tmy.Geetha under PVM Section. 36)DCW estimate fro shifting of 1no 9mtr PSC pole as per request of Thiru.Rajan at Pallivilai under PVM Section. 37)DCW estimate for deviation of LT line as per request of Tmy.Kasal Inba Lyla at Elathaiyadi under PVM Section. 38)DCW estimate for shifting of 1no 9mtr RCC pole as per request of Thiru.Chandran at Pallivilai under PVM Section. 39)DCW estimate for shifting of 1no 8mtr PSC as per the request of Tmy.Sobana Kumari under PVM Section. 40)Eos to 1no TYSY to Thiru.Edwin Jose at lake view colony under PVM Section. 41)Eos to 1no TYSY to Thiru.Suresh Raj at Ulavurkonam under PVM Section.42)Eos to 1no ND PAL SC 114-012-1493, The Correspondent, The Pineer School MS Road under PVM Section. 43)DCW estimate as per request to Thiru Commissioner under PVM Section. 44)DCW estimate as per request to Thiru Agens Sooriya Raja under PVM Section. 45)DCW estimate for shifting of 1no 8mtr PSC pole as per request of Thiru.Vijaya Kumar under PVM Section. 46)DCW estimate for shifting of 1no 8mtr PSC pole as per request of Thiru.SelvaRaj Christopher under PVM Section. 47)DCW estimate for shifting of 1no 9mtr and 1no 8mtr PSC pole and deviation of HT line as per request of Thiru.M.Thurai Pandian at Iswrya Garden under Parvathpuram Section. 48)DCW estimate for shifting of LT line as per request of The President VP, ward 6 Kaniyakulam under PVM Section. 49)DCW estimate for shifting of 1no 9mtr PSC pole Thiru.Selvan at Kesavathiruppapuram under PVM section. 50)DCW estimate for shifting of 1no 8mtr PSC pole as per request of The President. VP Kaniyakulam under PVM Section. 51)Estimate for 1no TYSY SC to Thiru.Maria Jose at SS Nagar Under PVM Section. 52)Estimate for 1no TYSY SC to Thiru.Jegan Under PVM Section. 53)Eos to 1no TYSY SC to Tmy.Jemila Rani at Balaji Nagar under PVM Section. 54)Estimate for 1no TYSY SC to Thiru.Prabhu Under PVM Section. 55)DCW estimate for rectification of Nagammal Mill SS/25KVA Distribution Transformer Structure 1no 9mtr PSC pole and 1no 8mtr PSC pole due to dashing of Private vehicle TN 74AV4777 on 09.05.24 undder Parvathipuram Section. 56)Improvement estimate for strengthening of condductor from ACSR 7/2.11 to AAAC 7/2.50 at Keezhaperuvilai SS 250KVA under Parvathipuram Section. 57)Improvement estimate for replacement of aged conductor from ACSR 7/2.11 to AAAC 7/2.50 at Kottavilai SS 250 KVA under Parvathipuram. Section. 58)Eos to 1no TYSY SC to Thiru.Anand at Goldden Nager under Parvathipuram Section. 59)Eos to 1no TYSY SC to Thiru.Gopalakrishnan at Kaniyakulam under Parvathipuram Section.60)Eos to 1no IIIA1 S to Thiru.Tamil Sekvan at Railway Nagar, Pallivilai under Parvathipuram Section. 61)DCW estimate for shifting of 2nos 8mtr PSC pole and 1no fabricated pole 36 feet at loc no A,D,E in Rajeev Gandhi SS 100KVA as per request of Thiru.Jacob Parama Sigamony near Franklin Hospital under Parvathipuram Section. 62)Natural calamity to be replacement of 10 nos 8mtr PSC poles and line materials with ACSR 7/2.59 sq mm & 2nos 8m PSC stud pole at Pillayarvilai SS II 100 KVA DT due to fal on coconut tree under Rajakkamangalam Section.63)Natural calamity estimate for the replacement of damaged 4nos 8mtr PSC pole at loc no :FI/16,17 of Vadalivilai SS I 100KVA and loc no: FI/42,44 of Poochivilagam Ss I 100 KVA due to fallan of Coconut tree over LT line under Eathamozhy Section. 64) Natural Callamity estimate for the replacement of damaged 5nos 8mtr PSC pole at Loc no FII/22,23,24,26,30 in Amachiyarvilai SS II 63KVA due to fallen of coconut tree over LT Line under Eathamozhy Section. 65)DCW estimate to S.Kalanvathi, Kayankulam under PVM Section. 66) DCW estimate for Freeda Helen Dom under Parvathipuram Section. 67)DCW estimate for deviation of LT at loc noc A to D in Kayamkulam SS Ii 100KVA as per the request of Thiru.Siddhuvar Near four way road under Parvathypuram Section. 68)Eos to 1no TYSY SC to Tmy.P.W.Jebamalar at SS Nagar under PVM Section. 69)Natural Calamity estimate for the replacement of damaged 1no double pole ABSwitch near Panchayat Office of 11 KV kaliyankadu feeder under Parvathipuram Section. 70)Natural calamity estimate for replacement of damaged 1no 9mtr PSC pole at loc no:FI/4 of Peruvilai SS II 100KVA due to heavy rain on 16/10/2023 under Parvathypuram Section. 71)DCW estimate for shifting of 1no RSJ 36" at loc ETY-298 and dismantling of LT 8mtr PSC pole at loc FII-5 as per the request of the Assistant Engineer, Highways, Nagercoil in the Road widening at Eathamozhy main road at Eathamozhy SS IV 250 KVA in Eathamozhy Feeder under Eathamozhy Section. 72)Estimate for new street light service connection in kumarapuram area as per the request of the Executive Officer, Aralvaimozhy TP under Aralvaimozhy Section. 73) Eos to 1No Tariff V new LTCT service to Tmy.Viaishnavathi Kaliyankadu under Parvathipuram Section. 74)Eos to 1no Tariff III B service to Thiru.Robin Xavier at Chanthavilai Road under Thovalai Section. 75) Capital estimate for mew street light service connection IIA in Sc No.125-003-1815 as per request of The commissioner, Nagercoil Corporation at poochivilagam SS II 63KVA under Eathamozhy Section. 76)Capital estimate for mew street light service connection IIA in Sc No.125-003- as per request of The commissioner, Nagercoil Corporation at poochivilagam SS I 100KVA under Eathamozhy Section. 77) Capital estimate for mew street light service connection IIA in Sc No.125-002-380 as per request of The commissioner, Nagercoil Corporation at poochivilagam SS II 63KVA under Eathamozhy Section. 78) Eos to 1no IIIA indl new service connection to Thiru.Nivas at Melasoorankudy proposed new 25KVA DT under Eathamozhy section.in Kanyakumari Electricity Distribution Circle.

Details: Description Republic Of The Philippines Department Of Health Caraga Regional Hospital Surigao City Ooooooooo @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Bids And Awards Committee Invitation To Bid Ib No. 2024-12-19 (107) Supply And Delivery Of Various Catering Services Under Single-year Framework Agreement ( Early Procurement Activity ) Approved Budget For The Contract: Php 9,729,000.00 ========================================================= 1. The Caraga Regional Hospital (crh), Through The Fy2025 Internally Generated Fund (igf) Intends To Apply The Sum Of Being The Approved Budget For The Contract (abc) Of Nine Million Seven Hundred Twenty Nine Thousand Pesos Only ( Php 9,729,000.00 ) As To Payment Under The Contract For Supply And Delivery Of Various Catering Services Under Single-year Framework Agreement (early Procurement Activity). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening And Items Below Are Subject For A Competitive Bidding As Framework Agreement List. Item No. Description Qty Unit Of Measure Unit Cost Total Cost Lot 1 Catering Services At Crh Venue 1 Lot 5,005,000.00 5,005,000.00 Bid Amount Shall Not Exceed To The Abc Of Its Unit Cost Of Per Meal/snack A. Meals 7,000 Pax 450.00 I. Rice Ii. One (1) Vegetable Or Noodles/canton Iii. Meat (2) ( Pork Or Beef Or Chicken) Iv. Seafood (1) V. Soup (1) Vi. Dessert (1) Vii. Drinks (1) B. Snacks ( Am And Pm ) 14,000 Pax 130.00 I. Preferably Nutrient Dense Total 5,005,000.00 Specifications Requirements The Bidder Shall Comply The Following Terms And Conditions: 1. Has A Track Record Of At Least One (1) Year Experience In Catering Services 2. Has Adequate And Appropriate Equipment For The Different Types Of Occasions Such As Tables And Chairs, Table Cloths, Table Napkins, Food Warmers, Water Dispensers, Plates, Cups And Saucers, Spoons And Forks, Table Knives, Etc. Which Shall Be Green Environment Friendly. 3. Has The Capacity To Cater Of At Least 300 Participants At A Time 4. Amenable To Catering 7,000 Participants Within The Duration Of The Contract. 5. Complies With The Sanitation Requirements Such As Sanitary Permits And Licenses, Health Certificates Of Food Handlers Who Practice Proper Hand Washing, Wearing Of Gloves, Masks, Hairnets. 6. Has Readily Available Transport Vehicles For Proper Handling / Transport Of Foods 7. Implements Proper Sanitation, Cleanliness And Waste (leftovers And Used Utensil) Disposal Collection After Activities Provides Trash Bins Or Trash Bags 8. Capable Of Decorating Mess Hall, Preparing Complete Table Set-up And Implementing Proper Table Skirting 9. Has An Adequate Number Of Personnel Who Are Trained For Food Preparation, Hall Arrangement, Table Setting And Serving 10. All Serving Staffs Have Appropriate / Standard Attires They Shall Wear During Catering 11. Open For New Suggestions To Improve Delivery Of Services 12. Has The Required Standard Catering Equipment To Maintain Food Freshness And Quality 13. Can Provide Any Of The Following Free Flowing Beverages During The Entire Activity; A. Water And Coffee Accompanied By Sugar, Creamer, And Artificial Sweeteners, Or B. Water And Tea, Or C. Water And Hot Choco Or Alike 14. Capable Of Catering Food In The Form Of Buffet Or Set/packed Meals In Recyclable Or Biodegradable Food Packaging , Depending On The Requirement Of The End-user 15. Can Provide Buffer Equivalent To At Least 10% Of The Total Quantity Per Order 16. Shall Submit Menu Options Once Contract Is Awarded, If There Are New Menu To Be Offered, The Caterer Shall Submit The Updated Menu. 17. In Case Of Spoilage, The Caterer Should Be Amenable To: A. Replace Spoiled Food Immediately B. The Total Cost Of The Spoiled Food Will Be Deducted From The Total Contract Price. C. Outright Cancellation Of Contract, Depending On The Gravity Of The Intervention. 18. In Case Of Food Poisoning The Following Will Be Acted Upon: A. Outright Cancellation Of The Contract B. The Caterer Shall Shoulder The Expenses In The Hospitalization / Medical Treatment Of Those Persons Affected. 19. The Caterer Shall Prepare And Provide The Following Meals Referring To The Call-off Being Served: 20. In The Event That The End-user Or The Host Team Will Request For An Additional Menu, This Will Be Deducted To The Contract. 21. The Crh ( Procuring Entity ) Shall Notify The Caterer The Activity To Be Conducted In The Preceding Month, Every 20th Day Of The Month. 22. A Call-off Will Be Served To The Caterer 7 Calendar Days Before The Actual Date Of The Said Activity. 23. Every Successful Call-off / Activity Shall Be Processed For Payment. Lot 2 Catering Services With Venue And Accomodation 1 Lot 4,724,000.00 4,724,000.00 Bid Amount Shall Not Exceed To The Abc Of Its Unit Cost Of Per Meal/snack A. Meals 4,915 Pax 600.00 I. Rice Ii. One (1) Vegetable Or Noodles/canton Iii. Meat (2) ( Pork Or Beef Or Chicken) Iv. Seafood (1) V. Soup (1) Vi. Dessert (1) Vii. Drinks (1) B. Snacks ( Am And Pm ) 9,830 Pax 150.00 I. Preferably Nutrient Dense C. Room Accomodation 120 Days 2,500.00 Total 4,724,000.00 Specification Requirements The Bidder Shall Comply The Following Terms And Conditions: 1. Has A Track Record Of At Least One (1) Year Experience In Catering Services 2. Has Adequate And Appropriate Equipment For The Different Types Of Occasions Such As Tables And Chairs, Table Cloths, Table Napkins, Food Warmers, Water Dispensers, Plates, Cups And Saucers, Spoons And Forks, Table Knives, Etc. Which Shall Be Green Environment Friendly. 3. Has An Existing Venue That Can Accommodate At Least 300 Participants At A Time. In The Event That The Venue For The Requested Date For The Activity Is Not Available, The Caterer/bidder Must Ensure That They Can Provide An Alternate Venue Within Surigao City. 4. Amenable To Catering 4,915 Participants Within The Duration Of The Contract. 5. Has An Existing Hotels Or Inns Within Surigao City, And Is Amenable To Provide 120 Days Of Accommodation For 2 To 3 Pax Per Room Upon Request Within The Contract Duration. 6. Complies With The Sanitation Requirements Such As Sanitary Permits And Licenses, Health Certificates Of Food Handlers Who Practice Proper Hand Washing, Wearing Of Gloves, Masks, Hairnets. 7. Has Readily Available Transport Vehicles For Proper Handling / Transport Of Foods 8. Implements Proper Sanitation, Cleanliness And Waste (leftovers And Used Utensil) Disposal Collection After Activities Provides Trash Bins Or Trash Bags 9. Capable Of Decorating Mess Hall, Preparing Complete Table Set-up And Implementing Proper Table Skirting 10. Has An Adequate Number Of Personnel Who Are Trained For Food Preparation, Hall Arrangement, Table Setting And Serving 11. All Serving Staffs Have Appropriate / Standard Attires They Shall Wear During Catering 12. Open For New Suggestions To Improve Delivery Of Services 13. Has The Required Standard Catering Equipment To Maintain Food Freshness And Quality 14. Can Provide Any Of The Following Free Flowing Beverages During The Entire Activity; A. Water And Coffee Accompanied By Sugar, Creamer, And Artificial Sweeteners, Or B. Water And Tea, Or C. Water And Hot Choco Or Alike 15. Capable Of Catering Food In The Form Of Buffet Or Set/packed Meals In Recyclable Or Biodegradable Food Packaging , Depending On The Requirement Of The End-user 16. Can Provide Buffer Equivalent To At Least 10% Of The Total Quantity Per Order 17. Shall Submit Menu Options Once Contract Is Awarded, If There Are New Menu To Be Offered, The Caterer Shall Submit The Updated Menu. 18. In Case Of Spoilage, The Caterer Should Be Amenable To: A. Replace Spoiled Food Immediately B. The Total Cost Of The Spoiled Food Will Be Deducted From The Total Contract Price. C. Outright Cancellation Of Contract, Depending On The Gravity Of The Intervention. 19. In Case Of Food Poisoning The Following Will Be Acted Upon: A. Outright Cancellation Of The Contract B. The Caterer Shall Shoulder The Expenses In The Hospitalization / Medical Treatment Of Those Persons Affected. 20 In The Event That The End-user Or The Host Team Will Request For An Additional Menu, This Will Be Deducted To The Contract. 21. The Crh ( Procuring Entity ) Shall Notify The Caterer The Activity To Be Conducted In The Preceding Month, Every 20th Day Of The Month. 22. A Call-off Will Be Served To The Caterer 7 Calendar Days Before The Actual Date Of The Said Activity. 23. Every Successful Call-off / Activity Shall Be Processed For Payment. Technical Specification / Terms Of Reference Are Hereby Posted In Philgeps And Form An Integral Part Of This Invitation To Bid. 2. The Crh Now Invites Bids For The Procurement Of The Above-captioned Project. Delivery Of The Goods Is Required Within The Period Specified Under Section Vi (schedule Of Requirements). Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. Section 23.4.1.3.(ra 9184). The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty Five Percent ( 25% ) Of The Abc. Slcc Must Be Within 2 Years From The Submission Of Bids. (based On The Completion Date). The Single Largest Completed Contract (slcc) Must Pertain To Catering Services Or A Similar Nature Of Work, As Determined And Defined By The Bids And Awards Committee ( Bac ). For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: A. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And B. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Nondiscretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee (bac) Secretariat, Caraga Regional Hospital, Surigao City And Inspect The Bidding Documents At The Address Given Above During 8:00 Am – 5:00 Pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 22, 2024 To December 19, 2024 On Or Before 10:00 A.m. From The Address Above And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Specified Below: Bidding Schedule Pre-bidding Conference December 02, 2024 At 9:00 A.m.. Via Zoom Platform Link: Join Zoom Meeting Https://us06web.zoom.us/j/89915700307?pwd=iy4bgwzakhnybsxl2ap3e56ttj6kdx.1 Meeting Id: 899 1570 0307 Passcode: 477381 Deadline Of Submission Of Bids December 19, 2024 At 10:00 A.m... Via Online And Submit Your Bidding Documents To This Email Address: Crhbac2020@gmail.com. Please Be Advised That Failure To Submit Bidding Documents To The Designated Official Email Address Will Result In Automatic Rejection And Disqualification. Opening Of Bids December 19, 2024 At 2:00 P.m. Via Zoom Platform Link: Join Zoom Meeting: Https://us06web.zoom.us/j/84378286084?pwd=wbmirbag9xt0zepdbcvvjcg4zqmiij.1 Meeting Id: 843 7828 6084 Passcode: 417249 Complete Philippine Bidding Documents Link For The Complete Sets Of Philippine Bidding Documents (pbds): Https://drive.google.com/drive/folders/1mwrnzxmtn4lhjjrcliuscyefvhs-swbz?usp=sharing Amount Of Bidding Documents: Lot 1 : Catering Services At Crh Venue - Php 10,000.00 Lot 2 : Catering Services With Venue And Accommodation : Php 5,000.00 Bidders Who Wish To Participate In All Categories Will Be Required To Pay The Amount Of Php 10,000.00 Only It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Following Phlippine Bidding Documents Can Be Accessed In The Philgeps And All Form And Part Of This Invitation To Bid, To Wit: A. Technical Specification / Terms Of Reference/ List Of Items B. Instruction To Bidders: B.1. Documents To Be Submitted (checklist- This Will Be Discussed During The Pre-bid Conference) B.2. Memorandum Of Undertaking – Provision Thereof Is Strictly Implemented C. Guidelines On The Conduct Of The Electronic Submission And Receipt Of Bids By The Procuring Entity – Caraga Regional Hospital (crh) D. Philippine Bidding Documents E. Framework Agreement Guidelines F. Framework Agreement Lists F. Other Documents Essential Documents Required By This Procuring Entity And Ra 9184 6. The Crh Will Hold A Pre-bid Conference On The Above-mentioned Date, Time And Venue, Which Shall Be Opened To Prospective Bidders. The Pre-bidding Conference And Opening Of Bids Shall Be Conducted Through Videoconferencing, Webinar Or Virtual. Please Send Your Intent To Participate To Our Email Address As Provided Below. 7. Bids Must Be Duly Received By The Bac Secretariat At Via Designated Email On Or Before December 19, 2024 At 10:00 O’clock In The Morning. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On December 19, 2024 At 2:00 O’clock In The Afternoon At The Bac Conference Room, Beside Procurement Office, Caraga Regional Hospital, Rizal Street, Surigao City As Virtual / Electronic Bidding Via Zoom Platform. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above. Late Bids Shall Not Be Accepted Under Any Circumstances May It Cause. 8. Furthermore, The Standard Philippine Bidding Document (pbd) Is Form And Part Of This Invitation In Accordance To Ra 9184 And Other Applicable Laws, Rules And Policy. 9. The Crh Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. The Opening And Receipt Of Bids Is Strictly Implemented Through Electronic Submission. Given The Covid-19 Pandemic, Procurement Activity Has Been Expedient And One Of This Is The Conduct Of Electronic Submission Of Bids. The Crh Thru The Bids And Awards Committee (bac) Has Submitted Certification, Certified By The Highest Official Managing The Information Technology, Describing The Electronic System Or Procedure To Be Used By The Crh For The Electronic Submission And Receipts Of Bids And A Statement That The Same Is Compliant With The Gppb Resolution No. 12-2020 Requirements. 11. Bidding Documents Shall Be Emailed To This Email Address, With Activated Password To: Crhbac2020@gmail.com. You May Deposit On Line For The Payment Of The Bidding Documents To This Account Below: Bank Name: Land Bank Of The Philippines Account Name: Caraga Regional Hospital-trust Fund Account Number: 0982 -1288 – 70 12. Furthermore Deposit Slip Shall Be Submitted Via Email To: Crhprocurement.bac@gmail.com 13. The Procuring Entity Will No Longer Accept Nor Entertain Any Form Of Bids Submission Except Electronic. Failure To Comply Electronic Submission Will Be Immediately Disqualified. Guideline On The Electronic Submission Is Hereby Attached. 14. Join The Caraga Regional Hospital Supplier Network By Filling Out The Registry Form From This Link : Https://bit.ly/crh_suppliersregistry 15. For Further Information, Please Inquire To: Bac Secretariat Caraga Regional Hospital. Rizal Street, Surigao City Tel. Nos. (086) 826-1575 Local 194 Direct Line: (086) 826-9058 Mobile Nos. 09850508783 (smart/tnt) 09539212832 (globe/tm) E-mail Address: Crhprocurement.bac@gmail.com Approved By: (sgd) Atty. Ma. Flordelin T. Ensomo, Cpa Attorney Iv Chairman, Bids And Awards Committee

Details: Sources Sought Notice project Description: Pavilions, Protection Walls And Cultural Interpretation Panels For Lake Isabella anticipated Posting Date: 19 Dec 2024 sources Sought Number: W9123825s0010 sam Posting Title: Pavilions, Protection Walls And Cultural Interpretation For Isabella, California sam Posting Description: this Sources Sought Notice Is Being Issued For Market Research Purposes To Determine The Availability, Capability, And Interest Of Small Business Firms For A Potential Government Requirement. No Solicitation Is Available; Requests For A Solicitation Will Go Unanswered. No Award Will Be Made From This Notice. Responses Will Be Used To Determine Potential Acquisition Strategies, Understand Current Market Capabilities, And To Gain Knowledge Of Potential Sources. background: the U.s. Army Corps Of Engineers, Sacramento District (usace), Began Construction On The Isabella Dam Safety Modification Project (project) In 2018. Usace Is Authorized To Complete Work On The Isabella Dam And Auxiliary Dam Under The Flood Control Act Of 1944, Public Law 78-534, Chapter 665, Section 110, Page 901. In March 2021, Project Team Members Were Made Aware Of A Request From The Construction Contractor To Delineate And Open A New Borrow Area For Additional Construction Materials. under Section 106 Of The National Historic Preservation Act (nhpa), Usace Determined That Ground Disturbance In The Borrow Area Would Result In An Adverse Effect To Historic Properties. Use Of The Borrow Area Would Destroy Contributing Elements To An Archaeological Site And The Tübatulabal Cultural Landscape District. Both The Site And District Held Special Importance For The Tübatulabal Tribe As Physical Remnants Of Their Ancestors’ Presence On The Landscape, As Well As Contemporary Sources Of Tribal Identity And Connection To The Traditionally Used Cultural Landscape. Usace Determined Both Properties Eligible For Listing In The National Register Of Historic Places. in Accordance With A Programmatic Agreement Executed To Guide Project Compliance With Section 106 Of The Nhpa, Usace Consulted With The California State Historic Preservation Officer (shpo), Sequoia National Forest (snf), The Advisory Council On Historic Preservation (achp), And Interested Tribes, Receiving Concurrence In The Determinations Of Eligibility (doe) And Finding Of Effect (foe) And Approval Of The Supplemental Treatment Plan Outlining Potential Mitigation Measures In August Of 2021. general Scope: the United States Army Corps Of Engineers (usace) Sacramento District (spk) Anticipates A Potential Requirement To Construct Pavilions, Protection Walls And Prepare Cultural Interpretation Panels For Lake Isabella. prepare An Artistic Rendering, Fabricate, And Install Seventeen (17) Panels Approximately 36” X 24” On The History And Culture Of The Tübatulabal Tribe On A Pre-existing Concrete Sitting Wall Adjacent To The Boat Ramp At French Gulch Boat Launch. Usace Will Provide The Media (text And Images) On The Panels. Fabricate And Install One (1) Pre-engineered Shade Structure Approximately 8’ X 8’ Next To The Boat Ramp At French Gulch. prepare An Artistic Rendering, Fabricate, And Install One (1) Panoramic Interpretive Panel Approximately 48” X 24” That Depicts An Image Of The Viewshed With Tübatulabal Place Names In English And Paka’anil, As Well As Three Stories Of Significance To The Tribe, At The Auxiliary Dam Recreation Site. Usace Will Provide The Names And Points Of Interest. Fabricate, And Install One (1) Interpretive Panel Approximately 36” X 24” Describing Changes To The Kern River Valley Over Time. Design And Construct A Rock Sitting Wall Approximately 15’ X 3’ X 3’ To Serve As A Base For The Interpretive Panels At Auxiliary Dam Recreation Site. Wall Shall Be Constructed Out Of Natural Stone And Pigmented Mortar. Wall Shall Be Curved Approximately 90 Degrees With A Radius Of Approximately 5 Feet. Fabricate And Install One (1) Pre-engineered Shade Structure Approximately 12’ X 12’, Covering The Rock And Interpretive Panels At Auxiliary Dam. install A Boulder Line Along The Eastern Edge Of The Turnaround At The End Of Old Isabella Road Recreation Site. Boulders Shall Be Of An Appropriate Size And Spacing To Prevent Vehicles From Exiting The Turnaround And Encroaching On The Cultural Resource. the Potential Requirement May Result In A Firm-fixed-price Contract Solicited Approximately January/february 2025. If Solicited, The Government Intends To Award The Anticipated Requirement Approximately March/april 2025. the Government Estimates That Construction Of The Potential Requirement Can Be Completed Within 365 Calendar Days From Receipt Of Notice To Proceed. If Market Conditions Indicate This Estimate May Be Unrealistic, Respondents Are Encouraged To Provide Specific Information (such As Known Equipment Lead Times Or Other Timeline Concerns) For Government Consideration When Responding To This Sources Sought Notice. in Accordance With Federal Acquisition Regulation (far) 36.204(e), The Government Currently Estimates The Magnitude Of Construction For The Potential Project Is $500,000.00 To $1,000,000.00. the North American Industrial Classification System (naics) Code For The Potential Requirement Is Anticipated To Be 236220, Commercial And Institutional Building Construction. The Small Business Size Standard For The Naics, As Established By The U.s. Small Business Administration, Is $45,000,000 Annual Revenue. The Product Service Code For The Potential Requirement Is Anticipated To Be Y1qa, Construction Of Restoration Of Real Property (public Or Private). if There Is A Reasonable Expectation That At Least Two (2) Responsible Small Business Concerns Under This Naics Can Provide The Anticipated Services At Fair Market Prices, The Contracting Officer Is Required To Set The Acquisition Aside For Small Business Concerns. If Competition Is Set-aside For Small Businesses, Far 52.219-14, Limitations On Subcontracting, Requires That General Construction Small Business Contractors Self-perform At Least Fifteen Percent (15%) Of The Cost Of The Contract, Not Including The Cost Of Materials. If No Set Aside Is Made, The Requirement Is Competed With Full And Open Competition, And The Awarded Contractor Is Not A Small Business, The Contractor Will Be Required To Self-perform The Percent Of Work Identified In The Solicitation Under Far 52.236-1,performance Of Work By The Contractor. contractors With The Skill, Capabilities, Workload Capacity, And Ability To Obtain Bonding To Complete The Project Described Above (either Through Self-performance And/or Subcontractor Management) Are Invited To Provide Capability Statements To The Primary Point Of Contact Listed Below. Other Than Small Businesses Are Also Encouraged To Submit Capability Statements. capability Statement: responses Must Be Limited To Ten (10) 8.5 X 11-inch Pages With A Minimum Font Size Of Point 10. please Provide The Following Information: 1) Company Name, System For Award Management Unique Entity Identification Number (sam Ueid) Or Employer Identification Number(ein), Address, Point Of Contact Name, Contact Phone Number, Contact E-mail Address, And Statement Identifying Whether The Company Employs Union Or Non-union Workers. 2) Experience And Capability To Complete Contracts Of Similar Magnitude And Complexity To The Potential Requirement, Including At Least Three (3) Examples Of Comparable Work Performed Within The Past Three (3) Years. Each Example Should Include A Brief Description Of The Project, Description Of The Work Performed (identification Of Self-performance And/or Subcontractor Management), Customer Name, Customer Satisfaction, Timeliness Of Performance, Dollar Value Of The Project, And Whether There Were Any Challenges Experienced During The Project (delays, Investigations, Health And Safety Issues, Labor Shortages, Management/organizational Issues, Etc.). The Government Is Looking For A Construction Contractor However, This Requirement Involves Elements Of Graphic Design. Therefore, Please Provide Experience With Projects That Include Elements Of Graphic Design Work. 3) Business Size And Socioeconomic Type For The Applicable Naics (ex: Woman-owned Small Business, Serviced-disabled Veteran-owned Small Business (sdvosb), Veteran-owned Small Business (vosb), Certified Historically Underutilized Business Zone (hubzone), 8(a) Participant, Small Business, Or Other Than Small Business (large Business)). 4) Bonding Capability (in The Form Of A Surety Letter). . please Submit All Capabilities Statements, Information, Brochures, And/or Marketing Material As One (1) Document, Limited To The Page Maximum Above. responses Will Not Be Considered An Offer, Proposal, Or Bid For Any Solicitation That May Result From This Notice. Moreover, Responses Will Not Restrict The Government To An Acquisition Approach. This Notice Is For Information And Planning Purposes Only. Respondents Will Not Be Notified Of The Results Of Any Review Conducted Or The Capability Statements Received. please Provide Responses And/or Questions By E-mail To The Contract Specialist, Jessica Padilla, At (jessica.padilla@usace.army.mil) By 8:00 A.m. (pt) Monday, 10 January 2025. please Include The Sources Sought Notice Number, ‘w9123825s0010’ In The E-mail Subject Line.

Details: Contact Information|4|n711.17|cj8|717-605-1318|taylor.r.arroyo2.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| higher-level Contract Quality Requirement|6|x|||||| inspection And Acceptance Of Supplies|26|x||||||||||||x|||||||||||||| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Report (combo)|n/a|tbd|n00104|tbd|tbd|see Schedule|tbd|n/a|n/a|tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| equal Opportunity (sep 2016)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (may 2024)|13|334412|750|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||| the Purpose Of This Amendment Is To Clarify Required Quote Format Of Ffp (firm-fixed Price) Pricing. All Other Terms And Conditions Remain Unchanged. a. Electronic Submission Of Any Quotes, Representations, And Any Necessary Certifications Shall Be Accomplished Via An Email Directed To Taylor.r.arroyo2.civ@us.navy.mil. b. General Requirements: Mil-std Packaging, Government Source Inspection, Fob Source, Cav Reporting. c. This Rfq Is For Repair. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractor's Written Acceptance Prior To Execution. Verify Nomenclature, Part Number, And Nsn Prior To Responding. d. Only A Firm-fixed (ffp), Not-to-exceed (nte) Or Estimated (est) Price For The Repair Of The Subject Item(s) Will Be Accepted. Quotes Limited To Test And Evaluation (t&e) Will Not Be Accepted. The Quoted Price Must Be For The Repair Ofthe Item(s). e. Must Adhere To Iuid Requirements Of Dfars 252.211-7003 f. The Ultimate Awardee Of The Proposed Contract Action Must Be An Authorized Repair Source. Award Of The Proposed Contract Action Will Not Be Delayed While An Unauthorized Source Seeks To Obtain Authorization. g. The Government Is Requesting A Repair Turnaround Time (rtat) Of: ## ______ Days After Receipt Of Asset. repair Turnaround Time (rtat) Definition: The Resultant Contractual Delivery Requirement Is Measured From Asset Return To The Date Of Asset Acceptance Under The Terms Of The Contract. For Purposes Of This Section, Return Is Defined As Physical Receipt Of The f-condition Asset At The Contractor's Facility As Reflected In The Action Date Entry In The Commercial Asset Visibility (cav) System. Inaccordance With The Cav Statement Of Work, The Contractor Is Required To Accurately Report All Transactions By The End Of The F fifth Regular Business Day Afterreceipt And The Action Date Entered In Cav Must Be Dated To Reflect The Actual Date Of Physical Receipt. The Contractor Must Obtain Final Inspection And Acceptance By The Government For All Assets Within The Rtats Established In this Contract. please Note Freight Is Handled By Navy Cav Or Proxy Cav As Stated In Navsupwssfa24 Or Navsupwssfa25. throughput Constraint: Contractor Must Provide A Throughput Constraint For Eachnsn(s). Total Assets To Be Repaired Monthly After Initial Delivery Commences: _____/month (contractor Is To Fill In #). A Throughput Of "0" (zero) Per Month Reflects No Throughput constraint. induction Expiration Date: 365 Days After Contract Award Date. Any Asset Received After This Date In Days Is Not Authorized For Repair Without Bi-lateral Agreement Between The Contractor And Navsup Wss Contracting Officer. h. Important Note: reconciliation Price Reduction: any Asset(s) For Which The Contractor Does Not Meet The Required Rtat Will Incur A Price Reduction Per Unit/per Month The Contractor Is Late. However, Any Delay Determined To Be Excusable (e.g. Government Delay) Will Not Result In A Price Reduction. If The contractor Does Not Meet The Required Rtat Due To Inexcusable Contractor Delay, The Contracting Officer Will Implement The Aforementioned Price Reduction Via A "reconciliation Modification" At The End Of The Contract Performance. Price Reductions Made Pursuant To this Section Shall Not Limit Other Remedies Available To The Government For Failure To Meet Required Rtats, Including But Not Limited To The Government's Right To Terminate For Default. in Reference To The Above Important Note, The Contractor Provides The Followingprice Reduction Amount Per Unit/per Month The Contractor Does Not Meet The Rtat: $___________, Up To A Maximum Of: $__________. (vendor Is To Fill In Amount) i. Your Quote Must Include The Following Information For Justification Purposes: - Repair Unit Price ________________ - Total Price________________ - Repair Turnaround Time (rtat) _____________ Days - New Unit Price ______________ note: If You Are Not Quoting The Government's Requested Repair Turnaround Time (rtat) Or Sooner, You Must Provide Your Company's Capacity Constraints Below: ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ - T&e Fee/price (if Asset Is Determined Br/ber): If An Item Is Determined Br, And The Contractor Provides Documentation That Costs Were Incurred During Evaluation And Determination Of Br/ber, The Contracting Officer Will Negotiate A Reduced Contract Price, Not-to exceed (nte) $___________associated With The Repair Effort To Reflect The Br Status Of The Equipment. - The T&e Fee (if Asset Is Determined Br/ber) Was Determined Based On: ____________________________________________________________________ ____________________________________________________________________ - Award To Cage:________ - Inspection & Acceptance Cage, If Not The Same As Award To Cage: _________ - Facility/subcontractor Cage (where The Asset Should Be Shipped To), If Not Same As Award To Cage. __________ - Facility/subcontractor Or Packaging Facility Cage (where The Asset Will Be Shipped From), If Not The Same As Award To Cage. ________ - Cost Breakdown Requested, Including Profit Rate (if Feasible). - Quote Expiration Date _______________________ (min Of 90 Days Is Requested). - Delivery Vehicle (if Delivery Order Requested) (if Your Company Has A Currentboa/idiq, For Example) Accelerated Delivery Is Encouraged And Accepted Before The Delivery Date(s) Listed In The Schedule. ^^ only A Firm-fixed Price (ffp) For The Repair Of The Subject Item(s) Will Be Accepted. Quotes Limited To Test And Evaluation (t&e) Will Not Be Accepted. The Quoted Price Must Be For The Repair Of The Item(s). please Consider The Following When Providing Price: include Repair Price With All Costs Associated With Receipt And Complete Repairof Material That May Be In Incomplete Condition, Missing Hardware, Damaged, Handling Damage, Missing Parts, And Wear Damage. important Note: Any Asset For Which The Contractor Does Not Meet The Required Rtat Will Incur A Price Reduction Per Unit/per Month The Contractor Is Late - Any Delay Determined To Be Excusable (e.g. Government Delay) Will Not Result In Aprice Reduction. If A Price Reduction Is Required Due To Unexcusable Contractordelay, The Contracting Officer Will Implement The Aforementioned Price Reduction Via A "reconciliation Modification" At The End Of The Contract Performance. Price Reductions Made Pursuant To This Section Shall not Limit Other Remedies Available To The Government For Failure To Meet Required Rtats, Including But Notlimited To The Government's Right To Terminate For Default. in Reference To The Above Important Note, The Contractor Provides The Followingprice Reduction Amount Per Unit Per Month The Contractor Does Not Meet The Rtat: $__________, Up To A Maximum Of: $_________. \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Repair And The Contract Quality Requirements For The Circuit Card Assemb . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Circuit Card Assemb Repaired Under This Contract/purchase Order Shall Meet The Operational And Functional Requirements As Represented By The Cage Code(s) And Reference Number(s) Listed Below. All Repair Work Shall be Performed In Accordance With The Contractors Repair/overhaul Standard Practices, Manuals And Directives Including But Not Limited To Drawings, Technical Orders, Manufacturing Operations, Tooling Instructions, Approved Repair Standards And Any Other contractor Or Government Approved Documents Developed To Provide Technical Repair Procedures. cage___ref. No. ;16786 K939020926; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 3.4 Soldering - The Requirements For Soldered Electrical And Electronic Assemblies Shall Conform To Ipc J-std-001, Class ;3; . 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 4.4 Inspection/testing Repaired Items - The Contractor Shall Perform All Inspection And Testing Requirements As Specified In The Original Manufacturer's Specifications And Drawings. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.3 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer.

Details: Contact Information|4|n711.17|cj8|717-605-1318|taylor.r.arroyo2.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| inspection And Acceptance Of Supplies|26|x||||||||||||x|||||||||||||| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving (combo)|n/a|tbd|n00104|tbd|tbd|see Schedule|tbd|n/a|n/a|tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| equal Opportunity (sep 2016)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (may 2024)|13|334290|800|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||| the Purpose Of This Amendment Is To Clarify Required Quote Format Of Ffp (firm-fixed Price) Pricing. All Other Terms And Conditions Remain Unchanged. a. Electronic Submission Of Any Quotes, Representations, And Any Necessary Certifications Shall Be Accomplished Via An Email Directed To Taylor.r.arroyo2.civ@us.navy.mil. b. General Requirements: Mil-std Packaging, Government Source Inspection, Fob Source, Cav Reporting. c. This Rfq Is For Repair. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractor's Written Acceptance Prior To Execution. Verify Nomenclature, Part Number, And Nsn Prior To Responding. d. Only A Firm-fixed (ffp), Not-to-exceed (nte) Or Estimated (est) Price For The Repair Of The Subject Item(s) Will Be Accepted. Quotes Limited To Test And Evaluation (t&e) Will Not Be Accepted. The Quoted Price Must Be For The Repair Ofthe Item(s). e. Must Adhere To Iuid Requirements Of Dfars 252.211-7003 f. The Ultimate Awardee Of The Proposed Contract Action Must Be An Authorized Repair Source. Award Of The Proposed Contract Action Will Not Be Delayed While An Unauthorized Source Seeks To Obtain Authorization. g. The Government Is Requesting A Repair Turnaround Time (rtat) Of: ## ______ Days After Receipt Of Asset. repair Turnaround Time (rtat) Definition: The Resultant Contractual Delivery Requirement Is Measured From Asset Return To The Date Of Asset Acceptance Under The Terms Of The Contract. For Purposes Of This Section, Return Is Defined As Physical Receipt Of The f-condition Asset At The Contractor's Facility As Reflected In The Action Date Entry In The Commercial Asset Visibility (cav) System. Inaccordance With The Cav Statement Of Work, The Contractor Is Required To Accurately Report All Transactions By The End Of The F fifth Regular Business Day Afterreceipt And The Action Date Entered In Cav Must Be Dated To Reflect The Actual Date Of Physical Receipt. The Contractor Must Obtain Final Inspection And Acceptance By The Government For All Assets Within The Rtats Established In this Contract. please Note Freight Is Handled By Navy Cav Or Proxy Cav As Stated In Navsupwssfa24 Or Navsupwssfa25. throughput Constraint: Contractor Must Provide A Throughput Constraint For Eachnsn(s). Total Assets To Be Repaired Monthly After Initial Delivery Commences: _____/month (contractor Is To Fill In #). A Throughput Of "0" (zero) Per Month Reflects No Throughput constraint. induction Expiration Date: 365 Days After Contract Award Date. Any Asset Received After This Date In Days Is Not Authorized For Repair Without Bi-lateral Agreement Between The Contractor And Navsup Wss Contracting Officer. h. Important Note: reconciliation Price Reduction: any Asset(s) For Which The Contractor Does Not Meet The Required Rtat Will Incur A Price Reduction Per Unit/per Month The Contractor Is Late. However, Any Delay Determined To Be Excusable (e.g. Government Delay) Will Not Result In A Price Reduction. If The contractor Does Not Meet The Required Rtat Due To Inexcusable Contractor Delay, The Contracting Officer Will Implement The Aforementioned Price Reduction Via A "reconciliation Modification" At The End Of The Contract Performance. Price Reductions Made Pursuant To this Section Shall Not Limit Other Remedies Available To The Government For Failure To Meet Required Rtats, Including But Not Limited To The Government's Right To Terminate For Default. in Reference To The Above Important Note, The Contractor Provides The Followingprice Reduction Amount Per Unit/per Month The Contractor Does Not Meet The Rtat: $___________, Up To A Maximum Of: $__________. (vendor Is To Fill In Amount) i. Your Quote Must Include The Following Information For Justification Purposes: - Repair Unit Price ________________ - Total Price________________ - Repair Turnaround Time (rtat) _____________ Days - New Unit Price ______________ note: If You Are Not Quoting The Government's Requested Repair Turnaround Time (rtat) Or Sooner, You Must Provide Your Company's Capacity Constraints Below: ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ - T&e Fee/price (if Asset Is Determined Br/ber): If An Item Is Determined Br, And The Contractor Provides Documentation That Costs Were Incurred During Evaluation And Determination Of Br/ber, The Contracting Officer Will Negotiate A Reduced Contract Price, Not-to exceed (nte) $___________associated With The Repair Effort To Reflect The Br Status Of The Equipment. - The T&e Fee (if Asset Is Determined Br/ber) Was Determined Based On: ____________________________________________________________________ ____________________________________________________________________ - Award To Cage:________ - Inspection & Acceptance Cage, If Not The Same As Award To Cage: _________ - Facility/subcontractor Cage (where The Asset Should Be Shipped To), If Not Same As Award To Cage. __________ - Facility/subcontractor Or Packaging Facility Cage (where The Asset Will Be Shipped From), If Not The Same As Award To Cage. ________ - Cost Breakdown Requested, Including Profit Rate (if Feasible). - Quote Expiration Date _______________________ (min Of 90 Days Is Requested). - Delivery Vehicle (if Delivery Order Requested) (if Your Company Has A Currentboa/idiq, For Example) Accelerated Delivery Is Encouraged And Accepted Before The Delivery Date(s) Listed In The Schedule. ^^ only A Firm-fixed Price (ffp) For The Repair Of The Subject Item(s) Will Be Accepted. Quotes Limited To Test And Evaluation (t&e) Will Not Be Accepted. The Quoted Price Must Be For The Repair Of The Item(s). please Consider The Following When Providing Price: include Repair Price With All Costs Associated With Receipt And Complete Repair Of Material That May Be In Incomplete Condition, Missing Hardware, Damaged, Handling Damage, Missing Parts, And Wear Damage. important Note: Any Asset For Which The Contractor Does Not Meet The Required Rtat Will Incur A Price Reduction Per Unit/per Month The Contractor Is Late - Any Delay Determined To Be Excusable (e.g. Government Delay) Will Not Result In A Price Reduction. If A price Reduction Is Required Due To Unexcusable Contractor Delay, The Contracting Officer Will Implement The Aforementioned Price Reduction Via A "reconciliation Modification" At The End Of The Contract Performance. Price Reductions Made Pursuant To This Section shall Not Limit Other Remedies Available To The Government For Failure To Meet Required Rtats, Including But Not Limited To The Government's Right To Terminate For Default. in Reference To The Above Important Note, The Contractor Provides The Following Price Reduction Amount Per Unit Per Month The Contractor Does Not Meet The Rtat: $__________, Up To A Maximum Of: $_________. \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Repair And The Contract Quality Requirements For The Panel,control,elect . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Panel,control,elect Repaired Under This Contract/purchase Order Shall Meet The Operational And Functional Requirements As Represented By The Cage Code(s) And Reference Number(s) Listed Below. All Repair Work Shall be Performed In Accordance With The Contractors Repair/overhaul Standard Practices, Manuals And Directives Including But Not Limited To Drawings, Technical Orders, Manufacturing Operations, Tooling Instructions, Approved Repair Standards And Any Other contractor Or Government Approved Documents Developed To Provide Technical Repair Procedures. cage___ref. No. ;16786 K633320301; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 4.4 Inspection/testing Repaired Items - The Contractor Shall Perform All Inspection And Testing Requirements As Specified In The Original Manufacturer's Specifications And Drawings. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.3 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer.

Details: Description Republic Of The Philippines Local Government Unit Of General Santos City Bids And Awards Committee Goods And Consultancy Services City Hall, General Santos City Total Description Of Articles Item No. Ra1. Catering: 1 Snack With Venue Activity Title: Lcat Vawc Regular And Special Meeting Activity Date: February 2025 Snack Menu: Any Snack Variety 2 Courses With Softdrinks/bottled Water Inclusion: Projector, At Least 2 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser 7,000.00 Ra2. Catering: 1 Snack With Venue Activity Title: Lcat Vawc Sub Committee Regular And Special Meeting Activity Date: March 2025 Snack Menu: Any Snack Variety 2 Courses With Softdrinks/bottled Water Inclusion: Projector, At Least 2 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser 15,000.00 Ra3. Catering: 1 Snack With Venue Activity Title: Lcpc Regular And Special Meeting Activity Date: February 2025 Snack Menu: Any Snack Variety 2 Courses With Softdrinks/bottled Water Inclusion: Projector, At Least 2 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser 8,000.00 Ra4. Catering: 1 Snack With Venue Activity Title: Social Development Committee (sdc) Regular And Special Meeting Activity Date: March 2025 Snack Menu: Any Snack Variety 2 Courses With Softdrinks/bottled Water Inclusion: Projector, At Least 2 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser 7,000.00 Page 2 Of 6 25cb Gsc 026(r) Total Description Of Articles Item No. Rb1. Catering: 1 Meal Only With Venue Activity Title: Hr Mechanisms Program Activity Date: January 16, 2025, February 26, 2025, March 13, 2025, March 27, 2025 (15pax Per Dtae) Meal Menu: Soup/appetizer, 2 Main Courses, Rice, Dessert, Bottled Water/softdrinks Inclusion: Projector, At Least 2 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser Requirements: Hotel Or Suite *within 5kms From City Hall And Within Fare Of P18.00 Only *clean And Ready For Use Following The Layout Provided By User *with Adequate Airconditioning Units *with Clear Sound System With At Least 3 Microphones (1 Wireless With Batteries That Can Least 8 Hours Activity) *with Available Personnel To Respond To Needs Until The End Of The Activity Catering Should Be *with Enough Food For The Booked Number Of Participants *free Flowing Coffee And Water Note: 1.no Pork And Creamdory 2.date Of Activity Is Tentative And Will Depend On The Results Of The Bidding Process And Availability Of The Resource Persons And Venue. 3. Control Number: 66319 18,000.00 Rc1. Catering: 2 Meals And 1 Snack With Venue Activity Title: Meeting With Department Heads /agency Heads / Dpmt With Stakeholders / Various Meetings Activity Date: (january 10,2025) Tentative Meal Menu: Soup/appetizer, 2 Main Courses, Rice, Dessert, Bottled Water And Softdrinks Snack Menu: Any Snack Variety With Softdrinks /bottled Water Inclusion: Projector, At Least 2 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser Final Billing / Full Payment After Event Item Code 63260 55,000.00 Rd1. Catering: 1 Snack With Venue Activity Title: Cso/pcac Coordination Meeting Activity Date: January 30, 2025 (tentative) Snack Menu: Any Snack Variety 2 Courses With Softdrinks/bottled Water Requirements: Must Be In The Central Business District Of The City Must Have A Parking Area That Can Accommodate Up To 20 Vehicles Fully Airconditioned Venue Non Pork Menu Inclusions: Projector, At Least 4 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser 10,000.00 Page 3 Of 6 25cb Gsc 026(r) Total Description Of Articles Item No. Re1. Catering: 1 Snack With Venue Activity Title: Orientation For Job Order Workers Activity Date: January 6, 2025 (am & Pm) January 13, 2025 (am & Pm) January 20, 2025 (am & Pm) February 3, 2025 (am & Pm) February 10, 2025 (am & Pm) February 17, 2025 (am & Pm) February 24, 2025 (am & Pm) March 7, 2025 (am & Pm) Am Snack Menu: Clubhouse Sandwich And Canned Juice Pm Snack Menu: Spaghetti With Bread And Softdrinks Venue Should Be *within 5kms From City Hall And Within Fare Of P18.00 Only *can Accomodate At Least 55 Persons Including The Resource Speakers *clean And Ready For Use Following The Layout Provided By User *with Adequate Airconditioning Units *with Clear Sound System With At Least 3 Microphones (1 Wireless With Batteries That Can Last 8 Hours Activity) *with Available Personnel To Respond To Needs Until The End Of The Activity Catering Should Be *with Enough Food For The Booked Number Of Participants *free Flowing Coffee And Water Note: 1. No Creamdory 2. Must Be Delivered On Time 3. Must Be Served With Disposable Plates And Utensils 4. Date Of Activity Is Tentative And Will Depend On The Results Of The Bidding Process And Availability Of The Attendees. 5. Control #: 65073 180,000.00 Rf1. Catering: 1 Snack With Venue Activity Title: Internship Completion Ceremony 2025 Activity Date: March 12, 2025 Pm Snack Menu: Baked Spaghetti With Garlic Chicken And Softdrinks Requirements: Venue That Can Cater Maximum Of 400 Pax *with At Least 3 Available Personnel To Respond To Needs Until The End Of The Activity Catering Should Be *with Enough Food For The Booked Number Of Participants Note: Date Of Activity Is Tentative And Will Depend On The Results Of The Bidding Process And Availability Of The Venue And Attendees Control #: 65264 80,000.00 Rg1. Catering: 1 Snack With Venue Activity Title: City Fisheries Aquatic Resources Management Council Meetings Tentative Date: Jan 31, Feb 28 & March 28, 2025 Snack Menu: Any Snack Variety 2 Courses With Softdrinks/bottled Water Inclusion: Projector, At Least 2 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser (control No. 68267) 18,000.00 Page 4 Of 6 25cb Gsc 026(r) *25cb Gsc 026(r)* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production Total Description Of Articles Item No. The Local Government Unit Of General Santos City Now Invites Bids For The Supplies And Delivery Of Catering Services With Venue (rebid). Delivery Of The Goods Is Required On The Day Of Activity. Bidders Should Have Completed, Within 3 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders) Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non Discretionary "pass/fail" Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. Prospective Bidders May Obtain Further Information From Local Government Unit Of General Santos City And Inspect The Bidding Documents At The Address Given Below During Monday To Friday, 8:00 Am To 5:00 Pm Except On Holidays. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders Starting January 9, 2025 12:00 Noon From The Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 500.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Either In Person, By Facsimile, Or Through Electronic Means. The Local Government Unit Of General Santos Will Hold A Pre Bid Conference On None/not Required At Bids And Awards Committee Office 4th Floor, Left Wing, City Action Investment Center, General Santos City, Which Shall Be Open To Prospective Bidders. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before January 16, 2025 12:00 Pm. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of Acceptable Forms And In The Amount Stated In Itb Clause 14. Bid Opening Shall Be On January 16, 2025 2:00 Pm At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders Representatives Who Choose To Attend The Activity. Page 5 Of 6 25cb Gsc 026(r) *25cb Gsc 026(r)* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production The Local Government Unit Of General Santos City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: _______________________________ Atty. Francisco M. Gacal Chairperson, Bac Goods And Consulting Services