Vehicle Tenders

Details: The Los Angeles District, U.s. Army Corps Of Engineers Is Seeking To Lease A One Or Two Suites With A Total Of 552 Net/usable To A Maximum Of 950 Gross/rentable Square Feet (gross Square Feet To Include Any Common Area Factor), Of Existing Class A Or B Retail Space, In The City Of Florence Or Area Of San Tan Valley Arizona And Within The Defined Delineated Area (da) Boundaries Below: Zip Codes 85132 And 85143 the Government’s Desire Is For Afull-service Lease Of Retail Space For An Armed Forces Career Center For A Term Not To Exceed Five (5) Years With Government Terminationrights. offered Space Must Meet Government Requirements Per The Terms Of The Government Lease.interested Respondents May Include Building Owners And Representatives With The Exclusive Right To Represent Building Owners. Representatives Of Building Owners Must Include The Exclusivity Agreement, Representation Letter, Listing Contract Or Other Executed Agreement Granting The Exclusive Right To Represent The Building Owner With Their Response To This Advertisement. adequate Mass Transit (buses, Trains, Rail Cars) For The Public Within Three Walking Blocks Is Highly Desired. required --spaces Must Offer Both A Primary And A Secondary Point Of Ingress/egress. --lighted, Non-exclusive Or Reserved On-site Parking For (02) Marked Government Owned Vehicles Must Be Provided For On 24 Hours 7 Days A Week Basis. Additional Lighted Parking Must Be Available During Business Hours, Weekends And Holidays, For Approximately (02) Employee Vehicles And Visitors/recruit Candidate Parking. --must Use The Government Lease. --the Military Services Shall Have The Right To Use Space Beyond Normal Working Hours And, If Required, On Saturdays, Sundays, And Federal Holidays. This Includes The Use Of Elevators, Lights, Toilet Facilities, And, If Necessary, Heating And Air Conditioning. --armed Forces Recruiting Facilities Are Only Located In Defined Geographical Areas That Contain Businesses And Other Establishments That Are Of A Compatible Nature. Under No Circumstances Will Be These Facilities To Be In Areas Where Sexually Oriented Businesses, Bars, Nightclubs, Liquor Stores, Smoke Shops, Marijuana Dispensaries Etc. Or Other Business That Produce Injurious Odors Detectable With The Leased Spaces. Placement Near These Establishments Can Hamper Overall Production Of The Office Or Cause Concern For The Safety Of The Personnel Stationed There And Their Visitors. proposals Are Due No Later Than 5:00 Pm (mst) On January 17, 2025. responses Must Include At A Minimum: - *initialed (not Signed) Draft Lease Document - *initialed Copy Of The General Clauses 3517b - *initialed Copy Of The Janitorial Specifications - *completed, Signed And Dated Proposal To Lease Space Form, - As-built Floor Plan Drawing - Site Plan Showing Location And Available Parking - Digital Photo Of Street View Of Property *these Documents Are In The Attached Request For Lease Proposal Document notice:the Following Information Is Provided For Situational Awareness And Is Not Required To Respond To This Source Sought. All Contractors Must Be Registered In The System For Award Management (www.sam.gov) Prior To Award Of A Contract. All Proposed Contractors Are Highly Encouraged To Review Far Clause 52.232-33 Payments By Electronic Funds Transfer – System For Award Management, Which Indicates “all Payments By The Government Under This Contract Shall Be Made By Electronic Funds Transfer (eft).” Those Not Currently Registered Can Obtain Registration By Going To The Website Http://www.sam.gov. Please Begin The Registration Process Immediately In Order To Avoid Delay Of The Contract Award Should Your Proposal Be Selected. contact interested Parties May Contact Mr. Greg Boniface At The U.s. Army Corps Of Engineers, Arizona/nevada Branch, Real Estate Office, 3636 N Central Ave, Ste 900, Phoenix, Az 85012-1939; (602) 361-8309; Gregory.f.boniface@usace.army.mil, No Later Than 5:00 Pm(mst) On January 17th, 2025.

Details: Project Number Dgs A 0963 0067 P ... Project Number Dgs A 0963 0067 Phase 1 Project Title Combined Support Maintenance Shop Csms East Facility Improvements Project Location Bldg 10 102 Clement Avenue Fort Indiantown Gap Annville Pa 17003 This Project Is Advertising For Professional Selections For Design And Or Engineering Services Brief Description The Scope Of Work Includes But Is Not Limited To Renovations And Repairs To Bldg 10 102 The Combined Support Maintenance Shop East Csms E Which Serves As One Of Two Csms S Within The Pa Army National Guard S Complement These Facilities Are Responsible For Higher Levels Of Maintenance Supporting Military Equipment And Vehicles The Csms East Was Constructed In 1948 And Is A 59 800 Sf Steel Masonry Structure W Administrative Maintenance Restrooms And General Purpose Type Spaces The Facility Is Over 70 Years Old Components Of The Facility Are Deteriorating And In Need Of Repair Replacement Upgrade The Pa Department Of Military And Veterans Affairs Requires A Complete Final Design Package Including Construction Documents Suitable For Public Bidding Services Include But Are Not Limited To Planning Assessment Evaluation Of The Existing Facility And Proposed Repairs Upgrades Construction Estimates And Detailed Technical Specifications And Drawings Estimated Construction Cost 2 700 000 00 B Application Due Date Thursday January 16 2025 At 4 30 P M B The Department Of General Services Capital Programs And The Bureau Of Diversity Inclusion And Small Business Opportunities Identified This Procurement As Eligible For The Setting Of Small Diverse Business Sdb And Or Veteran Business Enterprise Vbe Participation Goals Applicants Must Agree To Meet All Sdb And Vbe Participation Goals In Full Or Demonstrate That They Have Made Good Faith Efforts To Meet The Goals Refer To The Project Trimble Unity Construct Previously E Builder Solicitation Folder For Instructions Regarding Small Div...

Details: This Request For Quote (rfq) Is For Mowing And Maintenance Services At Cecil M. Harden Lake In Rockville, In 47872. The Contractor Will Provide All Necessary Management, Personnel, Materials, Supplies, Tools, Equipment, Fuel, And Vehicles, Except As Otherwise Provided Herein, Required To Perform Mowing And Maintenance Services At The Cecil M. Harden Lake Project Recreation Areas, As Specified And In Strict Accordance With All Terms, Conditions, General, Specific And Technical Provisions, Drawings, Attachments, Exhibits, Etc., Contained Herein Or Incorporated By Reference. The Performance And Responsibility Of The Contractor Shall Include All Planning, Programming, Administration, Management, Supervision, Communications, And Inspection necessary To Assure That All Services Are Conducted In Accordance With The Contract Requirements And All Applicable Federal, State, And Local Laws And Regulations. The Contractor Is Required To Attend A Pre-performance Meeting To Be Scheduled By The Technical Point Of Contact (tpoc). included With This Solicitation Are 5 Numbered Attachments That Correspond To The Exhibit Table Within The Solicitation. Please Review All 5 Attachments For Additional Information About The Scope Of Work, How To Submit Questions Related To This Solicitation To The Government Through Projnet, And How To Submit Your Quotes Before The Deadline On 06 January 2025 At 1 Pm Est. Please Fill Out The Separate Price Breakout Schedule (pbs) And Include The Pbs With Your Quote. Failure To Include A Completed Pbs With Your Quote Will Be Considered An Incomplete Offeror And Will Not Be Included For Evaluation. 1 Firm Fixed Price Contract Will Be Awarded Based Off Lowest Total Price To The Government. ****************************************************** w912qr25qa001-0001: Amendment Added To Fix The Incorrect Solicitation Closing Date In The Special Instructions. Updated Special Instructions Page Included With The Amendment That Shows The Correct Offeror Due Date As 06 January 2025 @ 1 Pm Est. All Quotes Must Acknowledge All Amendments To Be An Acceptable Quote. No Other Changes To This Solicitation Have Been Made With This Amendment.

Details: Description Republic Of The Philippines Batangas State University Alangilan, Batangas City Request For Quotation Tree Cutting, Stump Removal And Tree Trimming 1. The Batangas State University (batstateu) Through The Bids And Awards Committee Invites Interested Firms/supplier To Submit Quotation For The Project "tree Cutting, Stump Removal And Tree Trimming" With An Approved Budget For The Contract (abc) Three Hundred Forty Thousand Pesos Only (php 340,000.00). Quotation Received In Excess Of The Abc Shall Be Automatically Rejected At The Opening. Item No. Qty Description 1. 1 Lot Tree Cutting, Stump Removal And Tree Trimming 1. Tree-cutting (trimming, Pruning, Cutting Of Branches) 2. Excavation And Stump Removal 3. Board Footing/lumbering (slicing Of Cut Trunks, Dimensions Will Be Based On The Common Sizes Used In Construction) 4. Hauling And Disposal Of Tree Debris. Requirements: Denr Licensed Chainsaws And Vehicles. Note: Kindly Indicate The Brand On Your Quotation. 2. Philgeps Registration Certificate And Other Business Permits Shall Be Attached Upon Submission Of The Quotation. 3. The Quotation Must Be Submitted (can Also Be Send Thru Fax And Email At The Contact Details Listed Below) Or To The Alangilan Campus Alangilan, Batangas City And Shall Be Received By The Committee On Or Before 5:00 Pm Of January 03, 2025. E-mail : Procurementquotation.alangilan@g.batstate-u.edu.ph 4. The Bsu Reserves The Right To Reject Any Or All Quotations And/or Proposals And Waive Any Formalities/ Informalities Therein And To Accept Such Bids It May Consider As Most Advantageous To The Agency And To The Government. Batstateu Neither Assumes Any Obligation For Whatsoever Losses That May Be Incurred In The Preparation Of Bids, Nor Does It Guarantee That An Award Will Be Made. Engr. Nomer M. Sarmiento Head, Procurement Office Alangilan Campus Alangilan, Batangas City (043) 425 - 0139 Loc.2130

Details: The Purpose Of Solicitation Amendment He125425re002_0003 (amd3) Is To: 1) Update The 52.212-1 Addendum Under The "page, Size And Format" Paragraph To State, "the Staffing And Vehicle Approach, As Well As The Past Performance Volumes Of The Proposal Are To Be Submitted In Accordance With The Chart Provided Under Proposal Content And Format Instructions;" And 2) Provide An Updated Attachment X2 Personnel To Add "dispatcher" And "sto Assistant" Labor Categories To The "personnel List" Tab. ------------------------------------------------------------------------------------------------------------------ the Purpose Of Solicitation Amendment He125425re002_0002 (amd2) Is To: extend The Proposal Due Date To Friday, 10 January 2025. ------------------------------------------------------------------------------------------------------------------ the Purpose Of Solicitation Amendment He125425re002_0001 (amd1) Is To: a. Include Two (2) Attachments Referenced In The Solicitation, #18 And #37 In The List Of Attachments Table On Page 53. b. The Following Four (4) Revisions To 52.212-1 Addendum Instructions To Offerors On Page 71 Of The Solicitation: (1) Instructions For Submitting Attachment X6, "non-disclosure Agreement" Have Been Revised To "please Provide The Company's Name And Point Of Contact To Include Name, Title, Address, Email, Phone Number, Company's Unique Entity Identifier/id, Cage/nato Cage Code In The Body Of The Email." (2) Under The Submission Of Offers, To Revise The Proposal Due Date For This Solicitation From Monday, 16 December To Extended Date Of Friday, 20 December 2024. (3) Table On Page 72 Containing Proposal Content And Instructions Has Been Revised At The Fourth Row Pertaining To Document Volume I, To Include Pdf As Additional Format To Submit Copies Of All Certified Subcontractor Agreements Along With The Excel Attachment X2 "personnel." (4) Removal Of Any Reference/addendums To Paragraphs (d), (e), (g), (h), And (i) Of Far 52.212-1. Those Paragraphs Are Therefore Unchanged, Andare Applicable As Written In Their Subject Clause Far 52.212-1. c. One (1) Revision To The 52.212-2 Addendum Under Factor 1, Subfactor 1: To Correct Due Date For Offeror's Proposed Personnel's Required Credentials From 01 August 2024 To 01 August 2025. d. To Post Questions & Answers Received For This Solicitation. ----------------------------------------------------------------------------------------------- the Department Of Defense Education Activity (dodea) Is Requiring Studenttransportation Daily Commute (dc) And Special Education (sped) Transportation Services In Support Of Dodea-pacific West District Schools Located On The Island Of Guam. the Government Intends To Award A Single Firm-fixed Price (ffp), Indefinite Delivery/indefinite Quantity (idiq) Contract(s) To The Offeror's Proposal That Represents The Best Value To The Government. This Acquisition Will Be Conducted In Accordance With Far Parts 12 And 15, Utilizing The Best Value Tradeoff Approach As Outlined In Far Subpart 15.101-1. In Addition, Any Potential Awardee Will Need To Be Deemed Responsible In Accordance With Requirements Of Far Part 9. the Requirement Consists Of Servicing 3 School Zones On The Island: 1. Mccool Schools Zone – Covers The South Region Of Guam. There Are Two (2) Schools: Mccool Elementary And Mccool Middle, Requiring Approximately Twelve (12) Bus Routes. 2. Andersen Schools Zone – Covers The North Side Of The Island. There Are Another Two (2) Schools (andersen Elementary And Andersen Middle), Requiring Approximately Eleven (11) Bus Routes. 3.guam High School Zone – Encompasses Both North And South Regions Of Theisland, Requiring Approximately Twelve (12) Bus Routes. refer To Subject Solicitation And Its Attachments For Specific Details.

Details: Description Item No. Description Quantity Unit Part A - Facilitie For The Engineers A.1.1 (6) Provision Of Combined Field Office, Laboratory And Living Quarters Building For The Engineers (rental Basis) 12.00 Month A.1.1 (11) Provision Of Furnitures/fixtures, Equipment & Appliances For The Field Office For The Engineer 1.00 Lump Sum A.1.2 (2) Provision Of 4x4 Pick Up Type Service Vehicle For The Engineer On Bare Rental Basis 12.00 Month Part B - Other General Requirments B.4 (10) Miscellaneous Survey And Staking 1.00 Lump Sum B.5 Project Billboard 2.00 Each B.7(2) Occupational Safety And Health Program 1.00 Lot B.9 Mobilization/demobilization 1.00 Lump Sum Part C - Earthworks 100(1) Clearing & Grubbing (with Stripping) 10,620.00 Sq.m. 101(3)b2 Removal Of Exisiting Concrete Pavement (0.20m Thk) 5,440.00 Sq.m. 102(2) Surplus Common Excavation 39,825.00 Cu.m. 102(3)a Surplus Rock Excavation (soft) 10,000.00 Cu.m. 102(3)b Surplus Rock Excavation (hard) - Blasting 4,454.00 Cu.m. 103(1)a Structure Excavation (common Soil) 852.00 Cu.m. 103(6)a Pipe Culvert And Drain Excavation 91.00 Cu.m. 104(1)a Embankment (from Excavation) 8,032.00 Cu.m. 105(1)a Subgrade Preparation 10,620.00 Sq.m. Part D - Subbase And Base Course 200 Aggregate Subbase Course 3,186.00 Cu.m. Part E - Surface Cources 300(1) Gravel Surface Course 531.00 Cu.m. 311(1)a.2 Pcc Pavement (plain)-conventional Method, 200mm Thk. 8,097.75 Sq.m. Part G - Drainage And Slope Protection Structures 500(1)b3 Reinforced Concrete Pipe Culverts, 910mm Dia. 50.00 Ln.m. 502(3)a3 Catch Basins 5.00 Ea. 506 Stone Masonry 1,846.00 Cu.m. Equipment Needed (minimum): 1 Unit Backhoe (0.80 Cu.m.) 4 Units Transit Mixer 1 Unit Concrete Screeder (5.5 Hp) 1 Unit Backhoe W/ Breaker (0.80 Cu.m.) 1 Unit Backhoe, Wheel Mounted (26 Cu.m.) 1 Unit Concrete Vibrator 1 Unit Bulldozer W/ Ripper, Dx175 1 Unit Water Truck (16000l) 1 Unit Plate Compactor (5 Hp) 1 Unit Bulldozer, Dx175 1 Unit Boom Truck 1 Unit Bar Bender, Three Phase 1 Unit Motorized Road Grader, G710a 1 Unit One Bagger Mixer 1 Unit Bar Cutter, Single Phase 1 Unit Vibratory Roller (10m.t.), Sd100dc 1 Unit Pneumatic Drilling Machine 1 Unit Payloder (1.5 Cu.m.), Lx80-2c 1 Unit Rtk W/ Complete Accessories 1 Unit Cargo Truck (9-10 Mt.) 1 Unit Air Compressor 3 Units Dump Truck (12 Cu.yd) 1 Unit Concrete Saw, 14''ø Blade

Details: Description Item No. Description Quantity Unit Part A - Facilitie For The Engineers A.1.1 (6) Provision Of Combined Field Office, Laboratory And Living Quarters Building For The Engineers (rental Basis) 12.00 Month A.1.1 (11) Provision Of Furnitures/fixtures, Equipment & Appliances For The Field Office For The Engineer 1.00 Lump Sum A.1.2 (2) Provision Of 4x4 Pick Up Type Service Vehicle For The Engineer On Bare Rental Basis 12.00 Month Part B - Other General Requirments B.4 (10) Miscellaneous Survey And Staking 1.00 Lump Sum B.5 Project Billboard 2.00 Each B.7(2) Occupational Safety And Health Program 1.00 Lot B.9 Mobilization/demobilization 1.00 Lump Sum Part C - Earthworks 100(1) Clearing & Grubbing (with Stripping) 13,968.00 Sq.m. 101(3)b2 Removal Of Exisiting Concrete Pavement (0.20m Thk) 5,440.00 Sq.m. 102(2) Surplus Common Excavation 52,380.00 Cu.m. 102(3)a Surplus Rock Excavation (soft) 10,000.00 Cu.m. 102(3)b Surplus Rock Excavation (hard) - Blasting 2,227.00 Cu.m. 103(1)a Structure Excavation (common Soil) 1,110.00 Cu.m. 103(6)a Pipe Culvert And Drain Excavation 145.20 Cu.m. 104(1)a Embankment (from Excavation) 8,032.00 Cu.m. 105(1)a Subgrade Preparation 13,968.00 Sq.m. Part D - Subbase And Base Course 200 Aggregate Subbase Course 4,190.40 Cu.m. Part E - Surface Cources 300(1) Gravel Surface Course 698.40 Cu.m. 311(1)a.2 Pcc Pavement (plain)-conventional Method, 200mm Thk. 10,650.60 Sq.m. Part G - Drainage And Slope Protection Structures 500(1)b3 Reinforced Concrete Pipe Culverts, 910mm Dia. 80.00 Ln.m. 502(3)a3 Catch Basins 8.00 Ea. 506 Stone Masonry 2,405.00 Cu.m. Equipment Needed (minimum): 1 Unit Backhoe (0.80 Cu.m.) 4 Units Transit Mixer 1 Unit Concrete Screeder (5.5 Hp) 1 Unit Backhoe W/ Breaker (0.80 Cu.m.) 1 Unit Backhoe, Wheel Mounted (26 Cu.m.) 1 Unit Concrete Vibrator 1 Unit Bulldozer W/ Ripper, Dx175 1 Unit Water Truck (16000l) 1 Unit Plate Compactor (5 Hp) 1 Unit Bulldozer, Dx175 1 Unit Boom Truck 1 Unit Bar Bender, Three Phase 1 Unit Motorized Road Grader, G710a 1 Unit One Bagger Mixer 1 Unit Bar Cutter, Single Phase 1 Unit Vibratory Roller (10m.t.), Sd100dc 1 Unit Pneumatic Drilling Machine 1 Unit Payloder (1.5 Cu.m.), Lx80-2c 1 Unit Rtk W/ Complete Accessories 1 Unit Cargo Truck (9-10 Mt.) 1 Unit Air Compressor 3 Units Dump Truck (12 Cu.yd) 1 Unit Concrete Saw, 14''ø Blade

Details: This Is A Sources Sought Synopsis Announcement, A Market Survey For Information To Be Used For Preliminary Planning Purposes. The Information Received Will Be Used Within The Navy To Facilitate The Decision Making Process And Will Not Be Disclosed Outside Of The Agency. The Intent Of This Sources Sought Synopsis Is To Identify Potential Qualified Small Businesses, U.s. Small Business Administration (sba) Certified 8(a) Businesses, Sba Certified Hubzone Small Businesses, Women-owned Small Businesses, And/or Service-disabled Veteran-owned Small Businesses. this Sources Sought Synopsis Is One Facet In The Government’s Overall Market Research In Regards To Whether The Proposed Solicitation Will Be Issued As A Competitive Set-aside Or As Full And Open (unrestricted). No Procurement Strategy Will Be Determined Based Solely On The Information Received In Response To This Sources Sought Synopsis. no Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Announcement Or Any Follow-up Information Requests. This Notice Does Not Constitute A Request For Proposal And Is Not To Be Construed As A Commitment By The Government For Any Purpose Other Than Market Research. Respondents Will Not Be Notified Of The Results Of This Market Research. naval Facilities Engineering Systems Command (navfac) Southwest Is Seeking Small Business, Sba Certified 8(a) Business, Sba Certified Hubzone Small Business, Women-owned Small Business, And/or Service-disabled Veteran-owned Small Business Sources With Current And Relevant Experience, Personnel, And Capability To Perform A Multiple Award Construction Contract For New Construction, Repair, And Renovation Of Commercial And Institutional Buildings Using Acm At Various Government Installations Located In California, Nevada, Arizona, Colorado, Utah, And New Mexico. However, It Is Anticipated That Most Projects Will Be Performed In The State Of California. the North American Industry Classification System (naics) Code Is 236220 (commercial And Institutional Building Construction) With A Small Business Size Standard Of $45 Million. Task Orders Issued Under The Proposed Multiple Award Contract(s) Will Be Performed At Various Government Installations Within The Area Of Responsibility (aor) Of Naval Facilities Engineering Systems Command Southwest Including, But Not Limited To, California, Arizona, Nevada, Utah, Colorado, And New Mexico. However, It Is Anticipated That Most Projects Will Be Performed In The State Of California. The Proposed Contract(s) Will Be For One (1) Base Period Of Two (2) Years And Three (3) Option Periods Of One (1) Year, Resulting In The Contract Performance Period Maximum Of Five (5) Years. The Estimated Total Contract Price For The Base Period And One Option Period For All Contracts Combined Is $1,500,000,000. The Task Order Range Is Estimated Between $15,000,000 And $150,000,000. projects Will Be Design-build For New Construction, Repair, And Renovation Of Commercial And Institutional Buildings Using Alternate Construction Methods (acm). Examples Of Acm May Include, But Are Not Limited To: Modular Units, Pre-fabricated And Pre-engineered Structures, Tension Fabric Structures, Tilt-up Walls, And Interior Modular Systems. Projects May Include, But Are Not Limited To: Airport Building, Office/administrative Building, Communications Facility, Vehicle Maintenance Facility, Armories, Parking Garage (paved Parking Lots Will Not Be Considered Relevant), Barracks Facility, Prison Facility, Fire Station, Dining Facility, Hospital/medical Facilities, Warehouse Facility, School Facility, Child Care Facility, And/or Retail Facility. For This Announcement, New Construction And/or Repair Of Single Family Homes Will Not Be Considered Relevant. interested Sources Are Invited To Respond To This Sources Sought Announcement By Using The Form Provided Under Separate File Titled “sources Sought Information Form”. The Following Information Shall Be Provided: 1) Contractor Information: Provide Your Firm’s Contact Information, Including Uei Number And Cage Code. 2) Type Of Business: Identify Whether Your Firm Is A Small Business, Sba Certified 8(a), Sba Certified Hubzone, Service-disabled Veteran-owned, And/or Women-owned Small Business Concern. For More Information On The Definitions Or Requirements For These Small Business Programs, Refer To Http://www.sba.gov/. 3) Bonding Capacity: Provide Your Surety’s Name, Your Maximum Bonding Capacity Per Project, And Your Aggregate Maximum Bonding Capacity. 4) Locations: Identify The Locations In Which You Are Willing And Capable To Work. 5) Experience: Submit A Minimum Of Three (3) And Maximum Of Five (5) Recent Specific Government Or Commercial Projects Your Firm Has Performed To Demonstrate Your Experience In The Construction, Repair, Or Renovation Of Commercial And Institutional Buildings Using Acm And Design-build As Indicated In This Announcement. A Specific Project Is A Single Project Or A Single Task Order Under An Indefinite Quantity Contract Or On-call Type Contract. “recent” Is Defined As Having Been 100% Completed Within The Seven (7) Years Prior To The Sources Sought Synopsis Issuance Date. All Projects Shall Have A Minimum Construction Cost Of $15,000,000. Projects Which Do Not Meet These Requirements May Not Be Considered Relevant. additional Submission Requirements: at Least One (1) Relevant Project With A Construction Cost Of $50,000,000 Or Above. at Least One (1) Relevant Project Demonstrating Experience With The New Construction Or Repair Of An Aircraft Hangar Or Vehicle Maintenance Facility. for Each Of The Projects Submitted For Experience Evaluation, Provide The Following: title And Location award And Completion Dates contract Or Subcontract Value type Of Work For Overall Project And Type Of Work Your Firm Performed current Customer Information Including Point Of Contact, Phone Number And Email Address whether The Work Was Performed As A Prime Or Subcontractor type Of Contract (design-build – See Sources Sought Information Form) narrative Project Description To Include Acm Components Used, Subcontractors/vendors Used And Acm’s Effect On The Project’s Cost And Schedule for Design-build Projects, Identify The Name And Address Of The A-e Firm Used To Provide Design Or Specify If Design Was Performed In-house. Identify Your Working Relationship With The Design Firm (i.e., Number Of Years Working Together). 6) Safety: Submit Osha Days Away From Work, Restricted Duty, Or Transfer (dart) Rates And Total Case Rate (tcr) For Each Of Calendar Years 2019, 2020, 2021, 2022 And 2023. For Any Dart Rate Of 3.0 Or Greater Or Any Tcr Of 4.5 Or Greater, Provide An Explanation To Address The Extenuating Circumstances That Affected The Rate And Any Corrective Actions Taken. Instructions For Calculating The Dart Rate And Tcr Can Be Found At Http://www.bls.gov/iif/osheval.htm. For Joint Ventures Or Mentor-protégé Agreements (mpa), Provide The Required Information For Each Entity In The Joint Venture Or Mpa. Navfac May Make An Acquisition Strategy Determination That Excludes Contractors That Do Not Submit The Required Information Or Contractors With Unexplained High Dart Or Tcr Rates From The Pool Of Sufficiently Qualified Contractors. in Sections Where Recent Experience Is Requested, All Experience Will Be Evaluated For Market Research Purposes Only. Firms Are Advised That While Experience Older Than Seven (7) Years Or Not Yet 100% Complete May Demonstrate Capability To Perform The Scope Of Work, It May Not Indicate That The Firm Could Be Competitive During A Future Solicitation Where Only The Most Recent Seven (7) Years Of Experience Will Be Accepted. Navfac May Make An Acquisition Strategy Determination Based On The Likelihood That A Sufficient Pool Of Qualified Contractors Will Be Competitive On A Future Solicitation. responses To This Sources Sought Announcement Are Due No Later Than 2:00 P.m. (pacific Standard Time) On January 8, 2024. Please Email Your Response, In A Pdf Format, To Shane.k.mahelona.civ@us.navy.mil. All Navfac Southwest Solicitations Are Posted On The Website At Https://sam.gov And Begin With “n62473.”

Details: Rfq Type Goods Goods Tools & Machinery Reference Number Gd12500507 Title Ged 1525 Comprehensive Tool Troley Description 2 Each X Ged 1525 Comprehensive Tool Troley 1 Each X Ctek Lithium Xs 12v-5a Battery Charger Specification* Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Allocation Of Preference Points *nb The Municipal Bidding Document 6.1 (mbd 6.1) Has Been Amended, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission. In Order To Qualify For Preference Points, It Is The Responsibility Of The Bidder To Submit A Duly Completed Mbd 6.1 Form (bidders Must Indicate How They Claim Points For Each Specific Goal). Submit Documentary Proof Of Updated Bbbee Certificate/sworn Affidavit And/or Cipc Certificate With Each Rfq Submission To Validate Specific Goals. (if A Bidder Is Registered And Active On The City#s Supplier Database And Has Submitted The Bbbee Certificate/ Sworn Affidavit/ Cipc Certificate, The Submission Of Said Documents Is Not Necessary). It Is Therefore Incumbent On Suppliers To Ensure That Documents Are Kept Updated. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times*** Please Supply. 1525- Gedore Or Eq Tool Assortment 155 Pieces D ## Ideal For The Professional Workshop. ##rigid Sheetmetal Structure. ##five Standard And Two Deep Easy-slide Drawers Incorporating Extra Strong Ball Bearing Slider Mechanisms. ##central Drawer Locking Mechanism. ##two Swivel Castors (one With Safety Brake) For Maximum Mobility And Safety. ##handle For Easy Manoeuvrability. ##load Capacity Of 300kg. ##load Capacity Per Drawer 35kg. ##blue And Grey Powder Coated. ##drawer Latch Incorporated Into Each Drawer. ##l=758 X W=602 X H=914mm. 661325 1525 Comprehesive - With Tools 1525 1b 6-24 Spanners (18) 60cp-250 Shifting Spanner C19 8-32 Sockets (24) No.50/20.8 Spark Plug Skt 1987 Sliding T-bar In19 5-19 Sockets (10) Tx19 E10-24 Sockets (8) 1990/75mm Extension 1990/125mm Extension 1990/250mm Extension Itx19 T20-t50 Sockets (7) No.20 4-13 Sockets (11) 2093z/94 Rev. Ratchet 2098 Driving Handle 1993-u10t Rev. Ratchet 1997/375mm 1995 Universal Joint 8000/a21 Circlip Pliers 8000/j21 Circlip Pliers 8000/a2 Circlip Pliers 8000/j2 Circlip Pliers 137/250 Vice Grip 145/250 Universal Pliers 8132/200jc Telephone Pliers 8250/200jc Combination Pliers 8316-200 Jc Side Cutters 42/88m Allen Key Set 43tx/09 Torx® Allen Key Set 2150 4-150 6.5 6.5-200 8 2153 5.5 2160 Ph1 Ph2 Ph3 2161 Ph2 400 8 X 10 Flare Nut Spanner 400 11 X 13 Flare Nut Spanner 400 12 X 14 Flare Nut Spanner 400 17 X 19 Flare Nut Spanner 400 22 X 24 Flare Nut Spanner 26r Tubular Box Spanners - 8x9 10x11 12x13 14x15 26rs/2 Stepped Tommy Bar 403 Hacksaw 9000.00 Digital Vernier No.702/21m Feeler- Gauge Set 9100.00 Utility Knife 9534.05 Tape Measure 267/40 Recoil Free- Hammer 8601/500g Ball Pein- Hammer 106 Chisel <(>&<)> Punch- Set (6-piece) 95/200 Flat Chisel * Please Supply Ctek Lithium Xs 12v-5a Battery Charger Or Eq Specifications Additional Information Delivery <(>&<)> Warranty Faqs Ambient Temperature -20° C To +50° C Type Of Charger 8-step, Fully Automatic Charging Cycle Charging Voltage 14.4 (normal) / 14.7 (agm) / 15.8 (recond) / 13.6 (supply) Vdc Type Of Battery 12 V Lead-acid Batteries Charging Current 10 A Max Input Voltage 230 V @ 50 Hz The Lithium Xs Is Specially Designed For Lithium (12v Lifepo4) Batteries. With Up To 5a Of Charge Current Available, It Can Charge L Ifepo4 Batteries From 5ah To 60ah And Maintain Up To 120ah. It's Easy To Use#just Connect It And Charging Starts Immediately. There's No Need To Disconnect Your Battery, And Any Low Voltage Protection Electronics Will Be Reset Automatically. The Lithium Xs Is A 'connect And Forget' Charger With 8 Charging Steps, A Testing Sequence That Tells You If The Battery Can Take And Retain The Charge, A Unique Maximization Step To Restore Full Capacity, And Patented Maintenance Charging For Maximum Performance, Even After Months Of Inactivity. Features Reverse Polarity Protection Splashproof And Dustproof (ip65) Delivery Date2025/02/28 Delivery Tosupport Services Suse Delivery Address0000 Suse, Cape Town Contact Person M Devajee Telephone Number0822247058 Cell Number Closing Date2025/01/15 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgd1.quotations@capetown.gov.za Buyer Detailsa.filby Buyer Phone0214009269 Attachments No Attachments Note This Commodity Has Gone Live For Only Quoting On The E-procurement Portal. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Description: Public tender Vob/a drilling work (DIN 18 301); work to expand boreholes (DIN 18 302); construction of groundwater measuring points on the site of the Major-Karl-Plagge barracks. Soil contamination with Pfas was detected in the area of a fire training house and in the area of the fire station. Additional tests are to be carried out to check whether the pollutants have already reached the groundwater approx. 15 to 20 meters below the ground. The area on which the construction site is located is fenced in and partially sealed off by buildings and driveways. Other uses will take place on the site while the work is taking place. As part of the current investigation phase, the installation of two groundwater measuring points on the barracks site is planned (single measuring points). 4-hour short pumping tests are to be carried out at the groundwater measuring points to be set up. The site of the Major Karl Plagge barracks is a military security area. Personnel and vehicles must be registered to enter the site. Daily working hours are limited to 7 a.m. to 4 p.m. The current list of services includes drilling and expansion work, rinsing and carrying out the pumping tests. Creating 2 single measuring points, final depth approx. 25 m U. Gok. Carrying out two 4-hour short pumping tests. A DVGW certificate in accordance with DVGW worksheet W 120 is to be submitted with the offer.