Vehicle Tenders

Details: The subject of the Public Contract is the installation of the Etcs mobile part, including all tangible and intangible parts necessary for its full functionality and integration into the Customer's 9 locomotives, including the design and implementation of a suitable technical and structural solution, securing the necessary approval, and securing all the documentation necessary for the registration of the vehicle in the register Railway Vehicles, Its Operation And Maintenance Or Other Similar Documents Relating To Each Of The Locomotives. Further details are provided in the tender documentation published here on the tenderer's profile.

Details: Overview this Is A Request For Information (rfi) Only. The Defender Mobile Situational Awareness Toolkit (dmsat) Provides A Defender-enhanced Mobile Common Operating Picture (cop). Dmsat Provides Mobile Patrols, Whether Mounted Or On Foot, A View Into The Positioning Of Themselves And Other Defender Elements Overlayed On A Terrain Map, As Well As A Means Of Communication. Dmsat Is One Of Three Lines Of Effort For The Larger Defender Multi-domain Command, Control, And Communications (dmdc3) Initiative. Dmsat’s Fixed And Mobile Capability Is Intended To Deliver Multi-domain Situational Awareness For Defenders At The Edge. Dmsat Consists Of Command Post And Mobile End User Devices That Connect Defenders To Each Other, Their Leadership, Other Base Responders, And Joint/coalition Forces. Dmsat Enables Leadership To Execute Command And Control With An Enhanced Understanding Of Rapidly Evolving Situations, The Environment, And Their Forces. description this Is A Request For Information (rfi) Only. Dmsat Aims To Enhance The Situational Awareness And Communication Capabilities For Users. This Is Accomplished Through A Hardware, Software, And Cloud Service Infrastructure. The Tactical Assault Kit (tak) User Interface Software Is The Primary Software User Interface For Dmsat. Tak Is A Government-owned And -maintained Situational Awareness Software Suite With A Variety Of Plug-ins To Expand On Operational Capacity And Use Cases Of The Software. Tak Software Development Is Managed By The Tak Product Center (tpc), And Updated Versions Are Released Approximately Once A Quarter. The User Interface Can Be Viewed In A Series Of Configurations On Mobile End-user Devices (euds), Laptop Orientation, And Static Computing Capabilities. Mobile Euds Allow For The Remote Access, Management, And Sharing Of Data Across The Dmsat Network. The Dmsat Network Can Be Expanded With Outside Systems For Data Sharing Purposes, Due To The Open Interface Standards And Common Data Languages Upon Which Tak Was Developed. The Modular Approach To Dmsat Allows Users To Interact With The Tak User Interface With The Appropriate Hardware That Fits Operational Needs In An Effective And Cybersecure Manner. disclaimers: We Will Use This Rfi To Inform Our Market Research, Acquisition Strategy, And To Help The Government Promote Competition For This Requirement By Identifying Potential Sources And Gauging Interest From Industry. The Government Is Interested In Hearing From All Potential And Interested Businesses Who Have The Capability To Provide The Products And Perform The Services Addressed Within This Rfi. respondents Shall Provide An Unclassified Response To The Rfi. Respondents Shall Indicate Whether Their Responses Contain Any Proprietary Information, And It Must Have The Appropriate Markings If The Respondents Wish For The Responses To Be Handled As Such. The Government Shall Not Be Held Liable For Any Damages Incurred If Proprietary Information Is Not Properly Identified. Please Be Advised That All Submissions Will Become Government Property And Will Not Be Returned. this Rfi Does Not Constitute A Request For Quotes (rfq) Or Request For Proposal (rfps), Nor Does It Promise To Issue An Rfq Or Rfp In The Future. The Government Does Not Intend To Award A Contract Based Upon Your Response To This Request. This Rfi Is Intended To Conduct Market Research And Capture Feedback Relating To Aflcmc/hbum’s Dmsat Program. Therefore, This Notification Is For Planning Purposes Only And Shall Not Be Construed As An Obligation On Behalf Of The Government To Acquire Any Products Or Services. Moreover, The Government Is Not Seeking Proposals At This Time And Will Not Accept Unsolicited Proposals. responders Are Advised That The Government Will Not Pay For Any Information Or Administrative Costs Incurred In Response To This Rfi. All Costs Associated With Responding To This Rfi Will Be Solely At The Responder’s Expense. None Of This Cost Shall Be Expensed On Any Government Contract. By Not Responding To This Rfi, You Are Not Precluded From Participating In Any Future Rfq Or Rfp That May Be Issued. As Such, Any Submission In Response To This Rfi Is Strictly Voluntary. to Access The Cui Srd, Please Request Access Via Sam.gov Or Send An Email Requesting Access To Mr. Andrew C. St. Maurice, Andrew.st_maurice@us.af.mil, And Capt Joshua C. Renick, Joshua.renick.1@us.af.mil. rfi Submission Details: in Your Response To This Rfi, At A Minimum, Please Include The Following Information: 1. Name Of Your Business, Physical And Mailing Addresses, Phone Number, And E-mail Of Designated Points Of Contact. 1.1. Sam Registration Status (active, Inactive, Not Registered) And Expiration Date. 1.2. Unique Entity Id And Cage Code. 1.3. Small Business Or Socio-economic Status, If Any (i.e., Small Business, Small, Disadvantaged Business, 8(a) Small Business, Service-disabled Veteran-owned Small Business, Hubzone Small Business, Woman-owned Small Business, And Economically Disadvantaged Women-owned Small Business). 1.4. Please Share A Price List Of The Commercial Items That May Be Included In Your Solution. 2. Are Your Services, And The Commercial Items Included In Your Potential Solution, Currently Available On A Gsa Multiple Award Schedule (mas), Idiq Contract, Or Another Contract Vehicle? If Yes, Then Please Provide The Relevant Gsa Mas Number/special Item Number (sin) Or Contract Number, Along With A Copy Of The Award And Any Other Pertinent Supporting Documents. 3. Please Identify And Describe, In Detail, Your Company’s Experience With Working On, Deploying, And Supporting Tak-based Solutions For A Previous U.s. Government Contract. In Your Response, Please Identify: 3.1. What Software Version Numbers And Platforms Were Used? 3.2. Has Your Company Integrated Systems To Tak? If So, Then Please Describe Which Tak Products Were Involved In The Integration And Describe The Nature Of The Connected Systems. 4. Does Your Company Currently Have Any Tak-based Services Or Products In Production? If So, Then Please Describe. Who Are The Current Customers Using This Service Or Product? 5. What Hosting Environments (on-premises, Cloud, Hybrid, Etc.) Has Your Company Deployed Tak Within? If Cloud-hosted, Then At What Dod Cloud Computing Impact Level? What Infrastructure Was Utilized In This Tak Network? 6. What Experience Does Your Company Have With Network Engineering? Please Identify If Your Company Has Provided Network Engineering Services To The Department Of Defense (dod), To Include Relevant Contract Numbers. 7. What Experience Does Your Company Have With Cyber Engineering? Please Identify If Your Company Has Provided Cyber Engineering Services To The Dod, To Include Relevant Contract Numbers. 8. To What Extent Has Your Company Deployed And/or Maintained Systems In A Cloud Environment? Please Identify The Cloud Service Provider(s). 9. Has Your Company Assisted In Preparation Of An Authority To Operate (ato)? Please Describe The Support Your Company Provided In Obtaining The Ato. 10. Has Your Company Had Any Prior Or Current Experience Working With Law Enforcement Or Air Force Security Forces? If So, Then Please Describe The Experiences, To Include The Following. 10.1. Any User Training Curriculum Your Company Has Created. Did Your Company Teach This Curriculum? In What Style Did You Teach This Curriculum? 11. Does Your Company Have Experience In Establishing And Managing Help Desk Support Services? If Yes, Then Please Provide Details Of Your Company’s Experience With This Subject. 12. Please Describe Your Company’s Experience With Managing And Tracking The Hardware’s End-of-life (eol) And Replacement, And With Maintaining Strong Supplier Relationships. 13. Please Describe Your Company’s Experience With Performing Enterprise-widetesting And Deployment Of Software Updates. Please Describe Your Test Approach And Methodologies, From Early Code Development Through Final Product Or User Acceptance, As Well As The Methods For Deploying Your Software. 14. Does Your Company Have Logistical Experience In The Transportation Of Materials Via Milair? If So, Then Please Provide Details Regarding Your Company’s Experience With This Subject. 15. Does Your Company Have Experience In Managing Logistics For Packaging, Handling, Support, And Transportation (phs&t) Of Materials, For Both Conus And Oconus? If Yes, Then Please Provide Details Or Specific Examples Regarding Your Company’s Experience With This Subject. 16. Does Your Company Have Logistical Experience In Developing And Managing Disposition Plans For Government Materials? If Yes, Then Please Provide Details Or Specific Examples Regarding Your Company’s Experience With This Subject. 17. Given The Information Provided In This Rfi Package, Please Provide A Rough Timeline Of Activities That Will Need To Be Completed Prior To Fielding To The First Base.

Description: Contact Information|4|n711.13|bh5|717-605-2462|rachael.l.costanzo.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| wide Area Workflow Payment Instructions (jan 2023)|16|combo|n/a|to Be Determined (tbd)|n00104|tbd|tbd|w25g1u & W62g2t|tbd|||tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| equal Opportunity (sep 2016)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (may 2024)|13|335312|1,250|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| subject Amendment Is Hereby Incorporated To Extend The Closing Date To 07 Jan 2025. All Other Terms And Conditions Remain Unchanged. subject Amendment Is Hereby Incorporated To Extend The Closing Date To 23 Dec 2024. All Other Terms And Conditions Remain Unchanged. Accelerated Delivery Is Encouraged And Accepted Before The Delivery Date(s) Listed In The Schedule. ^^ only A Firm-fixed Price (ffp) For The Repair Of The Subject Item(s) Will Be Accepted. Quotes Limited To Test And Evaluation (t&e) Will Not Be Accepted. The Quoted Price Must Be For The Repair Of The Item(s). evaluation Factors: evaluation Utilizing Simplified Acquisition Procedures the Government Will Issue An Order Resulting From This Request For Quotation To The Responsible Offeror Whose Quotation Results In The Best Value To The Government, Considering Both Price And A Non-price Factors. The Following Factors Will Be Used To Evaluate quotations: 1) Price. 2) Past Performance. The Offeror's Past Performance On Related Contracts Will Be Evaluated To Determine, As Appropriate, Successful Performance Of Contract Requirements, Quality And Timeliness Of Delivery Of Goods And Services, Cost Management, Communications between Contracting Parties, Proactive Management, And Customer Satisfaction. 3) Supplier Performance Risk As Described In Dfars 252.204-7024. (end Of Provision) quotes Shall Be Received No Later Than The Date Specified In The Solicitation In Order To Be Considered. please Consider The Following When Providing Price: include Repair Price With All Costs Associated With Receipt And Complete Repair Of Material That May Be In Incomplete Condition, Missing Hardware, Damaged, Handling Damage, Missing Parts, And Wear Damage. a. Electronic Submission Of Any Quotes, Representations, And Any Necessary Certifications Shall Be Accomplished Via An Email Directed To Rachael.l.costanzo.civ@us.navy.mil. b. General Requirements: Mil-std Packaging, Government Source Inspection, Fob Source, Cav Reporting. c. This Rfq Is For Repair. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractor's Written Acceptance Prior To Execution. Verify Nomenclature, Part Number, And Nsn Prior To Responding. d. Only A Firm-fixed (ffp), Not-to-exceed (nte) Or Estimated (est) Price For The Repair Of The Subject Item(s) Will Be Accepted. Quotes Limited To Test And Evaluation (t&e) Will Not Be Accepted. The Quoted Price Must Be For The Repair Of The Item(s). e. Must Adhere To Iuid Requirements Of Dfars 252.211-7003 f. The Ultimate Awardee Of The Proposed Contract Action Must Be An Authorized Repair Source. Award Of The Proposed Contract Action Will Not Be Delayed While An Unauthorized Source Seeks To Obtain Authorization. g. The Government Is Requesting A Repair Turnaround Time (rtat) Of: 88 Days After Receipt Of Asset. Repair Turnaround Time (rtat) Definition: The Resultant Contractual Delivery Requirement Is Measured From Asset Return To The Date Of Asset Acceptance Under The Terms Of The Contract. For Purposes Of This Section, Return Is Defined As Physical Receipt Of The f-condition Asset At The Contractor's Facility As Reflected In The Action Date Entry In The Commercial Asset Visibility (cav) System. In Accordance With The Cav Statement Of Work, The Contractor Is Required To Accurately Report All Transactions By The End Of The fifth Regular Business Day After Receipt And The Action Date Entered In Cav Must Be Dated To Reflect The Actual Date Of Physical Receipt. The Contractor Must Obtain Final Inspection And Acceptance By The Government For All Assets Within The Rtats Established In this Contract. please Note Freight Is Handled By Navy Cav Or Proxy Cav As Stated In Navsupwssfa24 Or Navsupwssfa25. throughput Constraint: Contractor Must Provide A Throughput Constraint For Each Nsn(s). Total Assets To Be Repaired Monthly After Initial Delivery Commences: _____/month (contractor Is To Fill In #). A Throughput Of "0" (zero) Per Month Reflects No Throughput constraint. induction Expiration Date: 365 Days After Contract Award Date. Any Asset Received After This Date In Days Is Not Authorized For Repair Without Bi-lateral Agreement Between The Contractor And Navsup Wss Contracting Officer. h. Important Note: reconciliation Price Reduction: any Asset(s) For Which The Contractor Does Not Meet The Required Rtat Will Incur A Price Reduction Per Unit/per Month The Contractor Is Late. However, Any Delay Determined To Be Excusable (e.g. Government Delay) Will Not Result In A Price Reduction. If The contractor Does Not Meet The Required Rtat Due To Inexcusable Contractor Delay, The Contracting Officer Will Implement The Aforementioned Price Reduction Via A "reconciliation Modification" At The End Of The Contract Performance. Price Reductions Made Pursuant To This Section Shall Not Limit Other Remedies Available To The Government For Failure To Meet Required Rtats, Including But Not Limited To The Government's Right To Terminate For Default. in Reference To The Above Important Note, The Contractor Provides The Following Price Reduction Amount Per Unit/per Month The Contractor Does Not Meet The Rtat: $___________, Up To A Maximum Of: $__________. (vendor Is To Fill In Amount) i. Your Quote Must Include The Following Information For Justification Purposes: - Repair Unit Price ________________ - Total Price________________ - Repair Turnaround Time (rtat) _____________ Days - New Unit Price ______________ note: If You Are Not Quoting The Government's Requested Repair Turnaround Time (rtat) Or Sooner, You Must Provide Your Company's Capacity Constraints Below: ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ - T&e Fee/price (if Asset Is Determined Br/ber): If An Item Is Determined Br, And The Contractor Provides Documentation That Costs Were Incurred During Evaluation And Determination Of Br/ber, The Contracting Officer Will Negotiate A Reduced Contract Price, Not-to exceed (nte) $___________associated With The Repair Effort To Reflect The Br Status Of The Equipment. - The T&e Fee (if Asset Is Determined Br/ber) Was Determined Based On: ____________________________________________________________________ ____________________________________________________________________ - Award To Cage:________ - Inspection & Acceptance Cage, If Not The Same As Award To Cage: _________ - Facility/subcontractor Cage (where The Asset Should Be Shipped To), If Not Same As Award To Cage. __________ - Facility/subcontractor Or Packaging Facility Cage (where The Asset Will Be Shipped From), If Not The Same As Award To Cage. ________ - Cost Breakdown Requested, Including Profit Rate (if Feasible). - Quote Expiration Date _______________________ (min Of 90 Days Is Requested). - Delivery Vehicle (if Delivery Order Requested) (if Your Company Has A Current Boa/idiq, For Example) \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Repair And The Contract Quality Requirements For The Controller Assembly . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Controller Assembly Repaired Under This Contract/purchase Order Shall Meet The Operational And Functional Requirements As Represented By The Cage Code(s) And Reference Number(s) Listed Below. All Repair Work Shall be Performed In Accordance With The Contractors Repair/overhaul Standard Practices, Manuals And Directives Including But Not Limited To Drawings, Technical Orders, Manufacturing Operations, Tooling Instructions, Approved Repair Standards And Any Other contractor Or Government Approved Documents Developed To Provide Technical Repair Procedures. cage___ref. No. ;1u7m4 8240795-001 00724 8240795-001; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 4.4 Inspection/testing Repaired Items - The Contractor Shall Perform All Inspection And Testing Requirements As Specified In The Original Manufacturer's Specifications And Drawings. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.3 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer.

Description: Contact Information|4|n713.30|haa|717-605-1308 |joshua.j.eshleman.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| higher-level Contract Quality Requirement (navicp Review Feb 1991)(feb 1999)|1|iso9001| inspection Of Supplies--fixed-price (aug 1996)|2||| wide Area Workflow Payment Instructions (jan 2023)|16|combo - Invoice And Receiving Report||tbd|n00104 |tbd|tbd|see Schedule|tbd|||tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| equal Opportunity (sep 2016)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (may 2024)|13|333415|1250|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| this Procurement Action Is Issued Pursuant To Emergency Acquisition Flexibilities (eaf/sepa) Iaw Far 13.201(g) And Far Subpart 18.2". Casrep Accelerated Delivery Is Encouraged And Accepted At No Additional Cost To Government. all Freight Is Fob Origin. this Rfq Is For A Buy/new Manufacture. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractor?s Written Acceptance Prior To Execution. Verify Nomenclature, Part Number, And Nsn Prior To Responding. government Source Inspection And Acceptance Are Required. Unit Price:__________ Firm Total Price:__________ Firm Procurement Turnaround Time (ptat) :__________ Awardee Cage: __________ Inspection & Acceptance Cage, If Not At Source:__________ Delivery Vehicle (if Delivery Order Requested) (if Your Company Has A Current Boa/idiq, For Example):__________ if You Are Not The Manufacturer Of The Material You Are Offering, You Must State Who The Manufacturer Is (name & Cage Code) And Be Able To Provide Traceability Information If Requested Prior To Receiving An Award. by Submitting A Quotation Or Offer, The Contractor Agrees That, When The Contractor Is Not The Manufacturer Of The Item, It Is Confirming That It Currently Has Or Will Obtain Before Award And Shall Retain Documented Evidence (supply Chain Traceability documentation) That The Item Is From The Approved Manufacturer And Conforms To The Technical Requirements. The Retention Period Is Five Years After Final Payment Under This Contract. at A Minimum, The Supply Chain Traceability Documentation For The Item Shall Include: Basic Item Description, Part Number And/or National Stock Number, Manufacturing Source, Manufacturing Sources Commercial And Government Entity (cage) Code, And Clear identification Of The Name And Location Of All Supply Chain Intermediaries Between The Manufacturer To The Contractor To Item(s) Acceptance By The Government. The Documentation Should Also Include, Where Available, The Manufacturer's Batch Identification For The time(s), Such As Date Codes Lot Codes, Or Serial Numbers As Date Codes Lot Codes, Or Serial Numbers. navsupwss Poc: Joshua.j.eshleman.civ@us.navy.mil \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The Compressor, Refgrnt . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 2.2 Order Of Precedence - In The Event Of A Conflict Between The Text Of This Contract/purchase Order And The References And/or Drawings Cited Herein, The Text Of This Contract/purchase Order Shall Take Precedence. Nothing In This Contract/purchase Order, however, Shall Supersede Applicable Laws And Regulations Unless A Specific Exemption Has Been Obtained. document Ref Data=mil-std-129 | | |r |190927|a| |02| document Ref Data=iso9001 | | | |010417|a| | | 3. Requirements 3.1 Cage Code/reference Number Items - The Compressor, Refgrnt Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;66935 377-05300-000 9d672 377-05300-000; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-129; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Spcc Contracting Officer Has Been Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Or A Detailed Description Of The Change, Explaining The Reason Therefore. If Finished Detail Drawings Are Not Available, Shop Drawings Inthe Form Used By The Manufacturer will Be Acceptable For Government Evaluation. When Notifying The Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change/minor Design Change - If The Manufacturer's Part Number Or Item Design Indicated Thereon Has Changed, But Form, Fit And Function Of The Item Is Not Affected Thereby, And The Design Change Meets The Criteria For Minor, By Not effecting Form, Fit, Function, Reliability Or Safety , Supply The Item And Advise Spcc Immediately Of The New Part Number, Furnishing A Detail Drawing And/or A Detailed Description Of The Change, As Applicable. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 3.4 Mercury Free - The Material Supplied Under This Contract/purchase Order Is Intended For Use On Submarines/surface Ships And Therefore Shall Contain No Metallic Mercury And Shall Be Free From Mercury Contamination. Mercury Contamination Of The Material will Be Cause For Rejection. If The Inclusion Of Metallic Mercury Is Required As A Functional Part Of The Material Furnished Under This Contract, The Contractor Shall Obtain Written Approval From The Procurement Contracting Officer Before Proceeding With Manufacture. The contractor's Request Shall Explain In Detail The Requirements For Mercury, Identify Specifically The Parts To Contain Mercury, And Explain The Method Of Protection Against Mercury Escape. Such A Request Will Be Forwarded Directly To The Procurement Contracting officer With A Copy To The Applicable Government Inspector. Upon Approval By The Contracting Officer, The Vendor Will Provide A "warning Plate" Stating That Metallic Mercury Is A Functional Part Of The Item And Will Include Name And Location Of That Part. The Use Of Mercury, Mercury Compounds, Or Mercury-bearing Instruments And/or Equipment In A Manner Which Might Cause Contamination In The Manufacture, Assembly, Or Test Of Material On This Contract Is Prohibited. The Most Probable Causes Of contamination Are Direct-connected Manometers, Mercury Vacuum Pumps, Mercury Seals, Or The Handling Of Mercury In The Immediate Vicinity. Mercury Switches, Mercury In Glass Thermometers, Standard Cells And Other Items Containing Mercury May Be Used If They Are located So As Not To Constitute A Contamination Hazard. If External Contamination By Metallic Mercury Occurs Or Is Suspected, The Following Test May Be Used To Determine Whether Contamination By Metallic Mercury Exists Or Whether Corrective Cleaning Measures Have Been Effective. Enclose The Equipment In A polyethylene Bag Or Close-fitting Airtight Container For Eight Hours At Room Temperature (70 Degrees F Minimum).sample The Trapped Air And If Mercury Vapor Concentration Is 0.01 Mg/cu Meter Or More, The Material Is Mercury Contaminated Insofar As The requirements Of This Contract Are Concerned. These Requirements Shall Be Included In Any Subcontract Or Purchase Order Hereunder And The Contractor Shall Insure Subcontractor Compliance With These Requirements. Technical Questions Pertaining To These Requirements Shall Be Referred To The Procurement Contracting Officer Via The Cognizant Administrative Contracting Officer. For Background, The Following Information Is Provided: Mercury Is Corrosive To Gold, Silver, Nickel, Stainless Steels, Aluminum And Copper Alloys. Stainless Steels, Nickel, And Copper Alloys Are Widely Used In Reactor Plants And Other Submarine/surface Ship Systems. Accidental Trapping Of Mercury In A component Could Cause Serious Damage To Vital Parts. Mercury Is Also Toxic If Inhaled, Ingested, Or Absorbed Through The Skin. It Is Evident That Grave Consequences Could Result From Small Amounts Of Mercury Vapor Present In An Unreplenished Submarine/surface ship Atmosphere. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Quality System Requirements - The Supplier Shall Provide And Maintain A Quality System Acceptable To The Government. The Quality System Requirements Shall Be In Accordance With Iso 9001. 4.2.1 ;suppliers Currently Using And Maintaining Inspection System Requirements To mil-i-45208 Are Granted Permission To Utilize Mil-i-45208 If Desired.; 4.3 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.4 Records Of Inspection - (this Requirement Is Not Applicable To Government Purchase Orders) Records Of All Inspection Work Performed By The Contractor, As Referenced Elsewhere In This Contract, Shall Be Kept Complete And Available To The Government During the Performance Of The Contract And For A Period Of Four Years After Final Delivery Of Supplies. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer. 6.3 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161.

Details: Defense Supply Center Richmond (dscr) Building 59c Interior Fence this Is A Solicitation For Construction Prepared In Accordance With The Format In Far Part 36, As Supplemented With Additional Information Included In This Notice. The Solicitation Number Sp4703-25-q-0014 Is Issued As A Request For Quote (rfq). The Resulting Contract Will Be A Firm-fixed Price Award With An Expected Period Of Performance Of 120 Days After Issuance Of The Notice To Proceed (ntp). objectives: To Install Fencing Inside Dscr Building 59 C Bay. background Area In 59c Bay Is Needed To Store Electric Vehicles Before Being Put Into Service Along With A Storage Area For The Engineer Section. specific Requirements use 1 5/8” Top Rail And Bottom Rail, 3” Terminal And Gate Posts (4” For The Cantilever Gate) With Covers. Line Posts Should Be No Less Than 2 1/2” In Diameter. All Posts Will Be Plated To The Existing Concrete. The Fencing Should Be 8’ Tall Using 9 Gauge Metal Fencing. within 59c Bay, Two Cages Will Be Erected. The Cage On The East Side Of The Space Will Have One Double 8’ Walk Thru Gate Primarily Centered Within The Space. On The West Side Of The Space, We Need One Single 8’ Walk Thru Gate And Then One 10’ Cantilever Rolling Gate. Drawings Available On The Last Two Pages. see Attached Sf1442 And Statement Of Work(sow) For Full Requirement Details. this Acquisition Is Set-aside For 100% Small Businesses. the North American Industry Classification System (naics) Code Is 236220 (open Storage Facilities). the Small Business Size Standard Is $45m. department Of Labor Wage Determination Based On Location Of The Service Provided (chesterfield County, Va). partial Proposals Will Not Be Accepted. for An Offer To Be Considered For Award, The Contractor Must Be Within A Commutable Driving Distance To The Dscr Facility. A 120-mile Radius From Dscr Is Defined As The Commutable Radius. award Will Be Made To The Lowest Priced, Technically Acceptable (lpta) Offeror That Meets The Requirements Stated In The Statement Of Work And The Solicitation. Also Refer To Clauses And Provisions Includes In This Notice. Past Performance Will Be Considered A Part Of Technical Acceptability, And The Contracting Officer Will Pull Contractor Data From Cpars And Sprs. the Contractor Must Be Registered In The System For Award Management (sam) Prior To Award. If Not Already Registered In Sam, Go To The Sam Website Www.sam.gov To Register Prior To Submitting Your Quote. all Inquiries Must Be Submitted No Later Than 12/20/24 Cob. Acceptable Method Of Quote Or Inquiries Submission Is Email To Robert.moragues@dla.mil. questions Are Due On 12/20/24, End Of Day. Submit Questions Via Email To Robert.moragues@dla.mil. quotes Are Due On January 06, 2025, End Of Day. Submit Quotes Via Email To Robert.moragues@dla.mil. a Site Visit Is Scheduled On Location At Defense Supply Center Richmond(dscr) On 12/18/24 @ 1000. Persons Interested In Attending Must Pre-register Through The Link Below. Processing By The Security Office Can Take Up To 5 Business Days; Interested Parties Are Advised That A Minimum Of 3 Business Days Is Typically Required. When Following The Link Below, You Will Be Prompted To Enter A Sponsor For The Site Visit. The Project Manager Will Serve As The Sponsor For The Site Visit. The Project Manager For This Requirement Is Bradley Zimny<bradley.zimny@dla.mil). Site Visit Meeting Location Is Marked With A Red Dot On P.44 Of The Attached Sow. access To Defense Supply Center Richmond Is Dictated By The Language At The Following Location: https://www.dla.mil/aviation/installation/visitors-and-id-office/ the Points Of Contact (poc) For This Solicitation Are Robert “lee” Moragues (robert.moragues@dla.mil). reference Attachment 1 - Statement Of Work (sow) For Additional Work Scope And Details. period Of Performance: 120 Days From Ntp ******************************************************************************************************************* additional Dscr Visitor Information a New System Was Implemented On 3 January 2023 To Screen Visitors And Contractors For Installation Access At Dscr.the New System Is Designed To Increase Efficiencies, Enhance The Protection Of Personal Information During The Vetting Process And Eliminate The Use Of Hard Copy Dla Form 1815s. The New Screening System Will Require Visitors And Contractors To Pre-enroll In Dbids (defense Biometric Identification System). To Begin The Process, Visitors And Contractors Will Complete Registration Through The Preenrollment Website: Https://dbids-global-enroll.dmdc.mil. upon Entry Of Their Information, Visiting Personnel Will Be Provided An Electronic Form To Download, Which Will Have An Individualized Barcode And Alpha Numeric Code. The Codes Will Be Electronically Sent To The Visiting Person’s Sponsor. Once In Receipt Of The Barcode, The Sponsor Will Email Security And Emergency Services And Provide The Barcode And Sponsorship Information. Once The Visitor/contractor Is Vetted And Approved For Installation Access, Security & Emergency Services Will Notify The Sponsor That The Visitor/contractor Can Go To The Dscr Visitor Center To Obtain His/her Pass. At The Visitor Center, The Visitor Provides The Barcode And Code Provided Earlier In The Process And Completes The Credentialing Process.

Details: Sources Sought Notice sources Sought Notice *= Required Field sources Sought Notice page 1 Of 4 page 1 Of 4 this Is A Sources Sought Notice Only. The Purpose Of This Sources Sought Notice Is To Obtain Information Regarding The Availability And Capability Of All Qualified Sources To Perform A Potential Requirement, And To Gain Knowledge Of Potential Qualified Service-disabled Veteran Owned Small Business (sdvosb), Veteran Owned Small Business (vosb), Small Business Manufacturers, And Other Small Businesses, Interested And Capable Of Providing Items Requested, As Well As Any Large Business Interested And Capable. This Request For Information/sources Sought Notice In Support Of The Portland Va Medical Centers, Is For Market Research Purposes And Planning Purposes Only And Is Not To Be Construed As A Commitment By The Government. The Government Will Not Pay For Information Solicited. Respondents Will Not Be Notified Of The Results Of The Evaluation. Results Will Be Used To Determine Set-aside. the Intended Contract Is A Firm-fixed Price Supply Purchase. the Sba Non-manufacturer Rule Is Applicable, And A Waiver Will Not Be Sought For This Potential Acquisition. potential Contractors Shall Provide, At A Minimum, The Following Information: 1) Company Name, Address, And Point Of Contact, Phone Number, E-mail Address, And Sam.gov Uei Number/code. 2) Anticipated North American Industry Classification System (naics) Code Is 339113. The Largest A Firm Can Be And Still Qualify As A Small Business For Federal Government Programs Is No More Than 800 Employees. Please Indicate Whether You Are A Small Business, Sdvosb, Vosb, Small Business Manufacturer, Other Small Business, Or Large Business, And Whether You Are The Manufacturer Of The Items Listed Below. 3) The Government Is Not Obligated To Nor Will It Pay For Or Reimburse Any Costs Associated With Responding To This Sources Sought Notice. This Notice Shall Not Be Construed As A Commitment By The Government To Issue A Solicitation Or Ultimately Award A Contract, Nor Does It Restrict The Government To A Particular Acquisition Approach. The Government Will In No Way Be Bound To This Information If Any Solicitation Is Issued. Notice To Potential Offerors: All Offerors Who Provide Goods Or Services To The United States Federal Government Must Be Registered In The System Award Management (sam Located On The Web At Www.sam.gov). It Is Desirable That Any Offeror To Have Completed Their Business Online Representations And Certifications Application In The System For Award Management (sam). 4) Any Service-disabled Veteran Owned Businesses Or Veteran Owned Businesses Who Respond To A Solicitation On This Project Must Be Registered With The Small Business Administration Vetcert Registry Located At Https://veterans.certify.sba.gov. 5) If Not A Manufacturer, Only Authorized Representatives/providers/distributors Of The Manufacturer Will Be Considered. Equipment Must Be New, No Used Or Refurbished Equipment Accepted. Please Provide A Proof Of Authorized Dealer Or Reseller Letter From Manufacturer. 6) If You Are The Manufacturer, Do You Have Any Designated Or Authorized Distributors? If So, Please Provide Their Name, Telephone, Point Of Contact And Size Status (if Available). 7) This Is A Brand Name Or Equal Requirement. As Such, The Salient Characteristics Reflect The Physical, Functional, Or Performance Characteristics That Equal Products Must Meet To Satisfy The Government S Needs. To Be Considered For Any Potential Solicitation, Offers Of Equal Products, Including Equal Products Of The Brand Name Manufacturer, Must: (a) Meet The Salient Physical, Functional, Or Performance Characteristic Of The Brand Name Item And Those Specified In This Sources Sought; Clearly Identify The Item By Brand Name, If Any And Make/model Number. (b) Include Descriptive Literature Such As Illustrations, Drawings, Or A Clear Reference To Descriptive Data Or Information Available That Identifies That The Equal Item Meets Or Exceeds The Salient Characteristics Required By The Government. (c) Identify The Manufacturer Name (oem) And Manufacturer Part Number, As Well As Any Warranty Information. (d) Please Provide A Courtesy Quote In Response To This Request To Evaluate Price Reasonableness For Any Set-aside Determination, And Any Applicable Contract Vehicle Information. it Is The Intent Of The Va To Use The Information Gathered For Market Research Purposes Only. If A Formal Solicitation Is Released, It Will Be Posted Via The Contracting Opportunities Website Located At Beta.sam.gov. Or Gsa Ebuy. description Of The Requirement: the Department Of Veterans Affairs Is Looking To Obtain Information On Vendors Who Can Provide The Products As Outlined Below. This Is An Unrestricted/open Market Brand Name Or Equal To Request For Information/sources Sought Notice. delivery: portland Va Medical Center community Living Center 1601 E 4th Plain Blvd vancouver, Wa 98661 items: Brand Name Or Equal To Hillrom Centrella item # description/part Number* qty Price Extended Amount 1 centrella Bed With Pro Surface cnt 255 3 2 centrella Smart+ Bed With Max Air Surface And Blower cnt 355 8 3 bed Base cnt Base 11 4 nurse Call In Siderail 11 5 accessory Outlet 11 6 patient Helper Bracket 11 7 osi Patient Helper Sleeve 11 8 pro Surface For 36 Inch Frame 3 9 safeview With Illumiguide 3 10 second Lcd Touchscreen 3 â  Subtotal (products) â  salient Characteristics max Air Feature Powered Air Mattress Operates Continuously To Decrease Localized Heat And Moisture Buildup. Allows For Continuous Full-body Pressure Redistribution For Patients 70 To 500 Pounds, Automatically Adjusts The Air System To Accommodate Changes Weight Distribution. ability To Override And Increase Firmness For Patient Transfers Or Adjust Patient Position. ability To Adjust For Patient Comfort, With 2 Zones, Which Can Be Adjusted Separately. gci Touchscreen Located On The Outside Of The Head Rails For Quick Caregiver Access To Patient And Bed Status As Well As Other Bed Controls. Approximate Size 4x5 Inches bed Exit Silence Exit Alarm Settings To Include Silence, Auto Reset, And Visual And Audible Safety Prompts. brake Not Set Alarm Spoken Verbal Safety Alert To Caution Caregiver And Patient In A Non-alarming Manner. one Button Chair One Button Control To Convert A Flatbed Into A Cardiac Chair. battery Backup - 12 Volt, 7 Mil Amp Hour Batteries X 2 digital Angle Indicator Digital Angle Indicator Gives The Specific Reading Of The Angle Of Bed If Trendelenburg Or Reverse Trendelenburg Positioning Is Needed. 18 Degrees Is The Maximum Achievable Angle. built In Line And Cord Mgmt - Cutouts For Electrical Cord Or Monitor Cable Management For Use During Transporting. Located Within The Head And Footboards. 4 Iv Pole Sockets - Sized For Standard Hospital Iv Poles. 2-4 Bag Capacity. integrated Restraint Holders - Sized For Standard Belt Restraints. lockout Controls Ability To Lock Controls. drainage Bag Holder Ability To Hold Up To 20 Pounds. smart Bed Ready (sidecom Req) - Up To 32 Patients Safety And Bed Matrices To Be Transmitted To Caregiver Devices (such As Smart Phones, Vocera, Etc) And/or Vista Or Cerner Emr wi-fi Module enhanced 3-mode Bed Exit - Includes Silence, Auto Reset And Visual And Audible Safety Prompts. motion Activated Nightlight stand Assist - Height Adjust Buttons To Aid In Safely Lifting The Patient Onto Their Feet advanced Slideguardâ® Feature - Reduces Patient Migration In Bed When The Head Of The Bed Is Raised foley Position Limit - Monitors And Alerts If A Foley Bag Is Touching The Floor patient Hob Angle Display - Digital Head Of Bed Angle Indicator Gives The Specific Reading Of The Angle Of The Head trend/rev Trendelenburg Ranges From 0-18 Degrees. dampened Emergency Cpr - Ability To Quickly And Safely Lower The Head Section To A Flat Position In Case Of A Code. Ability To Access From Both Sides Of The Bed. patient Storage In Siderail - Sized To Hold Items Such As Smart Phone, Reading Glasses, Books/magazines. integrated Urinal Holders Ability To Hold Any Sized Urine Collection Bottle That Is Filled. flexafoot Powered Bed Extend Powered Bed Length Extension. steer Caster Font Left Caster Can Be Locked For Steering 36 Inch Frame Width in-bed Scale Ability To Weight Up To 500 Pounds usb Charger 2nd Lcd Touchscreen patient Pendant - Moveable Bed Control That Allows The Patient Easy Access To Adjust The Bed S Head And Foot Sections. Approx. Size Is 3 X 5 . removable Iv Pole verbal Alerts Verbal Safety Alerts Such As Brake Not Set, Your Care Team Has Been Called, Please Don T Get Up, Etc. Able To Set 6 Different Languages. additional Information Sought: warranty Please Describe The Offered Warranty. place Of Manufacture Please Provide The Place Of Manufacture. if Your Business Is Interested And Capable, Please Send The Capability Statement Outlined Above, And A Courtesy Market Research Quote To Maureen.sundstrom@va.gov By 3:00pm Pst On January 10, 2025. No Phone Calls, Please. again, This Is Not A Request For Quote, And No Solicitation Is Available At This Time.

Details: Good day Please provide price information (estimated costs) for repairing the passenger information system from the vehicle Sa136-005. The SIP system failure is manifested by the lack of timetables displayed on all internal and external boards despite the efficiency of the individual elements included in the passenger information system. The ARI in the driver's cabins works properly. Sometimes the SIP regains efficiency only to lose it again after an unspecified time. In the information please provide: - Date and time of implementation - Payment deadline - Guarantee Best regards Andrzej Fiłka

Description: Contact Information|4|n711.17|ahf|717-605-1318|taylor.r.arroyo2.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| inspection And Acceptance Of Supplies|26|x||||||||||||x|||||||||||||| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Report (combo)|n/a|tbd|n00104|tbd|tbd|q98644|tbd|n/a|n/a|tbd|||||| note For Contractor/administrative Contracting Officer|3|||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| equal Opportunity (sep 2016)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| notice Of Total Small Business Set-aside (oct 2020)(deviation 2020-o0008)|1|| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (may 2024)|13|334412|750|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||| solicitation Due Date Was Mistakenly Extended From 23 Dec 2024 To 28 Jan 2025 Per Amendment 0001. Due To System Limitations Solicitation Close Date Could Not Be Reverted To Original Close Date Therefore Solicitation Close Date Is Hereby Extended To 02 Jan 2025.all Other Terms And Conditions Remain Unchanged. the Purpose Of This Amendment Is To Notate The Extension Of The Offer Due Datefrom 23 Dec 2024 To 28 Jan 2025. All Other Terms And Conditions Remainunchanged. a. Electronic Submission Of Any Quotes, Representations, And Any Necessary Certifications Shall Be Accomplished Via An Email Directed To Taylor.r.arroyo2.civ@us.navy.mil. b. General Requirements: Mil-std Packaging, Government Source Inspection, Fob Source, Cav Reporting. c. This Rfq Is For Repair. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractor's Written Acceptance Prior To Execution. Verify Nomenclature, Part Number, And Nsn Prior To Responding. d. Only A Firm-fixed (ffp), Not-to-exceed (nte) Or Estimated (est) Price For The Repair Of The Subject Item(s) Will Be Accepted. Quotes Limited To Test And Evaluation (t&e) Will Not Be Accepted. The Quoted Price Must Be For The Repairof The Item(s). e. Must Adhere To Iuid Requirements Of Dfars 252.211-7003 f. The Ultimate Awardee Of The Proposed Contract Action Must Be An Authorizedrepair Source. Award Of The Proposed Contract Action Will Not Be Delayed Whilean Unauthorized Source Seeks To Obtain Authorization. g. The Government Is Requesting A Repair Turnaround Time (rtat) Of: ## ______days After Receipt Of Asset. repair Turnaround Time (rtat) Definition: The Resultant Contractual Delivery R Equirement Is Measured From Asset Return To The Date Of Asset Acceptance Underthe Terms Of The Contract. For Purposes Of This Section, Return Is Defined Asphysical Receipt Of The f-condition Asset At The Contractor's Facility As Reflected In The Action Date Entry In The Commercial Asset Visibility (cav) System. In Accordance With The Cav Statement Of Work, The Contractor Is Required Toaccurately Report All Transactions By The End Of The fifth Regular Business Day After Receipt And The Action Date Entered In Cav Must Be Dated To Reflect The Actual Date Of Physical Receipt. The Contractor Must Obtain Final Inspection And Acceptance By The Government For All Assets Within The Rtats Establishedin this Contract. please Note Freight Is Handled By Navy Cav Or Proxy Cav As Stated In Navsupwssfa24 Or Navsupwssfa25. throughput Constraint: Contractor Must Provide A Throughput Constraint For Each Nsn(s). Total Assets To Be Repaired Monthly After Initial Delivery Commences: _____/month (contractor Is To Fill In #). A Throughput Of "0" (zero) Per Month Reflects No Throughput constraint. induction Expiration Date: 365 Days After Contract Award Date. Any Asset Received After This Date In Days Is Not Authorized For Repair Without Bi-lateral Agreement Between The Contractor And Navsup Wss Contracting Officer. h. Important Note: reconciliation Price Reduction: any Asset(s) For Which The Contractor Does Not Meet The Required Rtat Will Incur A Price Reduction Per Unit/per Month The Contractor Is Late. However, Any Delay Determined To Be Excusable (e.g. Government Delay) Will Not Result In A Price Reduction. If The contractor Does Not Meet The Required Rtat Due To Inexcusable Contractor Delay, The Contracting Officer Will Implement The Aforementioned Price Reduction Via A "reconciliation Modification" At The End Of The Contract Performance. Price Reductions Made Pursuant To This Section Shall Notlimit Other Remedies Available To The Government For Failure To Meet Required Rtats, Including But Not Limited To The Government's Right To Terminate For Default. in Reference To The Above Important Note, The Contractor Provides The Following Price Reduction Amount Per Unit/per Month The Contractor Does Not Meet The Rtat: $___________, Up To A Maximum Of: $__________. (vendor Is To Fill In Amount) i. Your Quote Must Include The Following Information For Justification Purposes: - Repair Unit Price ________________ - Total Price________________ - Repair Turnaround Time (rtat) _____________ Days - New Unit Price ______________ note: If You Are Not Quoting The Government's Requested Repair Turnaround Time (rtat) Or Sooner, You Must Provide Your Company's Capacity Constraints Below: ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ - T&e Fee/price (if Asset Is Determined Br/ber): If An Item Is Determined Br, And The Contractor Provides Documentation That Costs Were Incurred During Evaluation And Determination Of Br/ber, The Contracting Officer Will Negotiate A Reduced Contract Price, Not-to Exceed (nte) $___________associated With The Repair Effort To Reflect The Br Status Of The Equipment. - The T&e Fee (if Asset Is Determined Br/ber) Was Determined Based On: ____________________________________________________________________ ____________________________________________________________________ - Award To Cage:________ - Inspection & Acceptance Cage, If Not The Same As Award To Cage: _________ - Facility/subcontractor Cage (where The Asset Should Be Shipped To), If Not Same As Award To Cage. __________ - Facility/subcontractor Or Packaging Facility Cage (where The Asset Will Be Shipped From), If Not The Same As Award To Cage. ________ - Cost Breakdown Requested, Including Profit Rate (if Feasible). - Quote Expiration Date _______________________ (min Of 90 Days Is Requested). - Delivery Vehicle (if Delivery Order Requested) (if Your Company Has A Currentboa/idiq, For Example) Accelerated Delivery Is Encouraged And Accepted Before The Delivery Date(s) Listed In The Schedule. ^^ only A Firm-fixed Price (ffp) For The Repair Of The Subject Item(s) Will Be Accepted. Quotes Limited To Test And Evaluation (t&e) Will Not Be Accepted. The Quoted Price Must Be For The Repair Of The Item(s). please Consider The Following When Providing Price: include Repair Price With All Costs Associated With Receipt And Complete Repair Of Material That May Be In Incomplete Condition, Missing Hardware, Damaged, Handling Damage, Missing Parts, And Wear Damage. important Note: Any Asset For Which The Contractor Does Not Meet The Required Rtat Will Incur A Price Reduction Per Unit/per Month The Contractor Is Late - Any Delay Determined To Be Excusable (e.g. Government Delay) Will Not Result I N A Price Reduction. If A price Reduction Is Required Due To Unexcusable Cont Ractor Delay, The Contracting Officer Will Implement The Aforementioned Price Reduction Via A "reconciliation Modification" At The End Of The Contract Performance. Price Reductions Made Pursuant To This Section shall Not Limit Other Remedies Available To The Government For Failure To Meet Required Rtats, Including But Not Limited To The Government's Right To Terminate For Default. in Reference To The Above Important Note, The Contractor Provides The Following Price Reduction Amount Per Unit Per Month The Contractor Does Not Meet The Rtat: $__________, Up To A Maximum Of: $_________. \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Repair And The Contract Quality Requirements For The Kit, Cca,ntds-e,pci . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Kit, Cca,ntds-e,pci Repaired Under This Contract/purchase Order Shall Meet The Operational And Functional Requirements As Represented By The Cage Code(s) And Reference Number(s) Listed Below. All Repair Work Shall be Performed In Accordance With The Contractors Repair/overhaul Standard Practices, Manuals And Directives Including But Not Limited To Drawings, Technical Orders, Manufacturing Operations, Tooling Instructions, Approved Repair Standards And Any Other contractor Or Government Approved Documents Developed To Provide Technical Repair Procedures. cage___ref. No. ;53711 7611606; 3.1.1 ;functional Item Number 7611606 Identifies The Current Approved Item Of Supply As Sabtech (cage 0psr7) Part Number Se-04102-10 Or Se-04102-00 With Adtech Global Bracket Kit 76107-opt1 With Any Additional Requirements On The Design Control Document.; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 4.4 Inspection/testing Repaired Items - The Contractor Shall Perform All Inspection And Testing Requirements As Specified In The Original Manufacturer's Specifications And Drawings. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.3 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer.

Details: Polregio Sa Invites Contractors with experience in the subject of the order to submit price information for replacement bus transport on the Słupsk - Lębork section from 1 February to 8 March 2025. This Inquiry does not constitute an offer within the meaning of the Civil Code. In the Attachments tab you will find: - Agreement Template, Including the Conditions That Must Be Met by the Carrier - GDPR Information Clause - Timetable for replacement transport provided by a vehicle with a minimum of 20 seats (1 Bus for 1 Train). Two journeys a day from Lębork to Słupsk Departure at 11:36 pm and return to Lębork at 2:10 am. Number of road kilometres to be completed a maximum of 6480 (one journey is 81 road km).

Details: The Order Includes The Provision Of On-demand Traffic “emil Taunusstein” In Area Operations, Hereinafter Referred To As “odv”. In Terms Of Approval, This Corresponds To Regular Scheduled Traffic In Accordance With Section 44 Pbefg. This Involves A Demand-oriented, Timetable-independent Transport Of People By The Operator Using Passenger Cars Ordered In Advance By The Passengers And Without A Fixed Route Between Certain Entry And Exit Points In The Operating Area Determined By The Client. Operation Of All Virtual Stopping Points In The Control Area: Https://www.google.com/maps/d/0/viewer?mid=1lfx6h_jur7lubull1dfs4ayhsolmkps&femb=1&ll=50.1583023410848%2c8.1966926373&z=13 The Order Includes. . Driving Staff, Disposition And Depot, The Procurement And Maintenance Of The Vehicles, As Well As The Provision Of The Necessary Software. Passengers' Travel Requests Are To Be Served As Promptly And Efficiently As Possible. The Waiting Times Should Be As Short As Possible. Travel Requests Are Booked Via The App (see On-demand Software). In Addition, The Operator Also Accepts Travel Requests By Telephone During Operating Hours. The Requirements For The On-demand Software Can Be Seen In The Appendix “http://ausscription.igdb.de/rtv/20240105_funktionalitaeten_odv_software.pdf”. The Odv Is Operated At The Following Times: Monday To Thursday: 5:30 A.m. - 10:30 P.m. Friday: 5:30 A.m. - 12:30 A.m. Saturday: 7:30 A.m. - 12:30 A.m. Sunday And Public Holidays: 8:30 A.m. - 22 :30 P.m. During Operating Hours, One To Two Vehicles Are In Use At The Same Time. From The Distribution Of The Service Time In The System “http://ausschreib.igdb.de/rtv/20240103_mindestsoll_betriebsstunden_odv_2025.pdf” There Is An Expected Total Of 9,058 Operating Hours In A Standard Year (250 Days Monday To Friday, 52 Saturdays And 63 Sundays And Public Holidays). , Of Which 4,875 Are In Daytime Traffic And 4,183 Are In Late-night And Weekend Traffic. Requirements For The Vehicles: The Vehicle Fleet Consists Of At Least Three Battery-electric Minibuses Or Minivans With A Maximum Of Nine Seats (including Driver's Seat) Per Vehicle. In Each Vehicle There Are At Least Five And Up To Seven Passenger Seats In The Passenger Compartment. The Front Rows Of Seats In The Passenger Compartment Have A Maximum Of Two Seats And Only The Last Row Of Seats Has Up To Three Seats, So That It Is Possible To Climb Through To The Rear Without Folding Down The Seats. Passenger Seats Are Not Counted Or Used As Passenger Seats. At Least Two Of The Vehicles Have A Barrier-free Parking Space For Wheelchairs With Devices To Properly Secure Passengers. If The Wheelchair Space Is Used, The Number Of Additional Passenger Seats In The Vehicle May Be Temporarily Reduced To Three. All Vehicles Have A Step On The Side Door To Make It Easier For Passengers To Get In. The Common Conditions Of Carriage Of The Rhein-main-verkehrsverbund (gb-rmv) Apply On-demand Transport In The Rhine-main Transport Association Https://www.rmv.de/c/de/fahrkarten/infos-regelen/on-demand-verkehre-befoerderung-und-tarif.