Vehicle Tenders

Details: Rlp Procurement Summary Gsa Public Buildings Service u.s. Government general Services Administration (gsa) Seeks To Lease The Following Space: state: Nm city: Albuquerque delineated Area: North – Starting At The Intersection Of Hwy 556 ((tramway Blvd Ne) And Hwy 423 (paseo Del norte Ne) Heading West On Hwy 423 To The intersection Of Hwy 423 And Ventura St. Ne heading North To The Intersection Of Ventura st. Ne And Alameda Blvd Ne, Merging Into hwy 528 (heading West To The Intersection Of hwy 528 And Hwy 45 west – Starting At The Intersection Of Hwy 528 and Hwy 45 Heading South On Hwy 45, merging Into Hwy 314 Towards The Intersection of Hwy 314 And Hwy 6. south – Starting At The Intersection Of Hwy 314 and Hwy 6 Heading East On Hwy 6 To The intersection Of Hwy 6 And Hwy 47 Heading north On Hwy 47 To The Intersection Of Hwy 47 and Hwy 40 Heading East To The Intersection Of hwy 40 And Hwy 556 Heading North To The intersection Of Hwy 556 And Hwy 423 east – Starting At The Intersection Of Hwy 556 and Hwy 423 Heading North On Hwy 556 To The intersection Of Hwy 556 And Hwy 423. minimum Sq. Ft. (aboa): 2,600 maximum Sq. Ft. (aboa): 3,050 space Type: Warehouse parking Spaces (total): 0 parking Spaces (surface): 0 parking Spaces (structured): 0 parking Spaces (reserved): 0 09/2020 full Term: 10 Years firm Term: 8 Years option Term: Not Required additional Requirements: -storage Locations That Provide Ceiling Height allowance Of 6’8” Clearance Minimum - Floor Load Capable Of Storing 4 Davs With An approximate Weight Of 10,500 Lbs. Per Vehicle -the Leased Space May Not Be Located adjacent To Major Transportation Routes. -the Building Should Be Located In An Area Of the City With A Low Threat Level. offered Space Must Meet Government Requirements For Fire Safety, Accessibility, seismic, And Sustainability Standards Per The Terms Of The Lease. A Fully Serviced lease Is Required. Offered Space Shall Not Be In The 100-year Flood Plain. entities Are Advised To Familiarize Themselves With The Telecommunications prohibitions Outlined Under Section 889 Of The Fy19 National Defense authorization Act (ndaa), As Implemented By The Federal Acquisition regulation (far). ). For More Information, Visit: Https://acquisition.gov/far- case-2019-009/889_part_b. offers Due: January 3, 2025 occupancy (estimated): N/a send Offers To: government Contact Information lease Contracting Officer Carson Melom-lemos project Manager Cynthia Kirby note: Entities Not Currently Registered In The System For Award Management (sam) Are Advised To Start The Registration Process As Soon As Possible.

Details: This Is A Modification To The Special Notice Entitled "80jsc025cldpacquisitionupdate2024dec” Which Was Posted On Dec 20, 2024. You Are Notified That The Following Changes Are Made: the Due Date For Responses Isextended.all Questions/comments Must Be Submitted Electronically Via Email To Rogelio Curiel At Rogelio.curiel-1@nasa.gov No Later Than 5:00pm Est On Jan 10, 2025. the Next Acquisition Briefing Is Tentatively Planned The Week Of Jan 20, 2025 (additional Details Are Forthcoming And Will Be Posted On Sam.gov). ************* End Of Modification ************* this Is A Special Notice And Does Not Constitute A Commitment, Implied Or Otherwise, That The National Aeronautics And Space Administration (nasa) Will Take Action In This Matter. background: as Nasa Plans For The Retirement Of The International Space Station At The End Of The Decade, The Ability Of Private Industry To Take On The Task Of Providing Routine Utilization Of Low-earth Orbit (leo) And Maintaining A Continuous U.s. Presence In Space Is Of Vital Importance To Both Nasa And U.s. Goals. in A Multiphase Strategy, The Lyndon B. Johnson Space Center’s (jsc) Commercial Low-earth Orbit Development Program (cldp) Is Helping To Spur The Development Of New Low-earth Orbit Space Destinations And Supporting Systems From Private Industry. These Systems May Include End-to-end Services Such As The In-orbit Destination, Visiting Vehicles, And Supporting Launch Vehicles And Ground Systems. nasa Is Currently Developing Requirements For Commercial Leo Destination (cld) Capabilities To Safely Support Operations Of Nasa Astronauts And Spaceflight Participants In Leo On A Commercially Owned And Operated Space System. See The Links Here For Additional Information: Https://www.nasa.gov/leo-economy/low-earth-orbit-economy/ And Nasa's Low Earth Orbit Microgravity Strategy. purpose: nasa’s Cldp Is Providing An Industry Update Per The Attached Presentation Slides To Communicate The Cld’s Phase 2 Acquisition Strategy. Industry Is Invited To Provide Input In The Form Of Written Questions And/or Comments To Support Nasa’s Evolving Acquisition Strategy And Enable Nasa To Refine And Mature The Phase 2 Acquisition Strategy. All Questions/comments Must Be Submitted Electronically Via Email To Rogelio Curiel At Rogelio.curiel-1@nasa.gov No Later Than 5:00pm Est On Jan 7, 2025. Please Reference "80jsc025cldpacquisitionupdate2024dec" In Any Response. Telephone Questions Will Not Be Accepted. Nasa Expects To Provide Additional Information In The Form Of Questions And Answers; Therefore Interested Parties Should Note That Any Questions Submitted And Their Corresponding Answers Will Be Posted On This Website On A Non-attributable Basis. nasa Plans To Provide Additional Opportunities To Communicate To Industry And Intends To Hold Future Acquisition Strategy Briefings. The Next Acquisition Briefing Is Tentatively Planned The Week Of Jan 13, 2025 (additional Details Are Forthcoming And Will Be Posted On Sam.gov). no Solicitation Exists; Therefore, Do Not Request A Copy Of The Solicitation. If A Solicitation Is Released, It Will Be Synopsized On Sam.gov. Interested Firms Are Responsible For Monitoring This Website For The Release Of Any Solicitation Or Synopsis.

Details: The U.s. Government Currently Occupies Retail And Related Space In A Building Under Lease That Will Be Expiring. The Government Is Considering Alternate Space If Economically Advantageous. In Making This Determination, The Government Will Consider, Among Other Things, Theavailability Of Alternate Space That Potentially Can Satisfy The Government’s Requirements, As Well As Costs Likely To Be Incurred Through Relocating, Such As Physical Move Costs, Replication Of Tenant Improvements And Telecommunication Infrastructure, And Non-productive Agency Downtime. the Government Requires Afull-service Lease For: a Minimum Of 3170 Rentable Square Feet (rsf) And A Maximum Of 3893 Rsf Of Retail Office Space For A U.s. Armed Forces Career Center lease Term Not To Exceed Five (5) Years With Government Terminationrights located Within A Defined Delineated Area In American Fork, Ut. undesignated On-site Parking For Up To Seven (7) Government Vehicles Must Be Provided On A 24 Hours 7 Day A Week Basis offered Space Must Meet Government Requirements Per The Terms Of The Government Lease. interested Respondents May Include Building Owners And Representatives With The Exclusive Right To Represent Building Owners. representatives Of Building Owners Must Include With Their Response To This Advertisement, The Following: exclusivity Agreement, representation Letter, listing Contract Or Other Executed Agreement Granting The Exclusive Right To Represent The Building Owner responses Are Due No Later Than 3:30/pm Pdt On 01/08/2025. Submissions Must Be Made Electronically (by Email) To The Following Point Of Contact:

Details: ***sources Sought Amendment 001*** the Purpose Of This Sources Sought Amendment Is To Post Responses To Vendor Questions. All Other Information Remains Unchanged Including The Response Date. *** this Is A Request For Information (rfi) Only. This Rfi Is A Request For Informational Purposes Only And Does Not Constitute An Invitation For Bid (ifb), Request For Quotation (rfq), Or Request For Proposal (rfp). This Rfi Does Not Constitute A Commitment By The U.s. Army To Procure Products Or Services. The Government Does Not Intend To Award A Contract On The Basis Of This Rfi Or Otherwise Pay For The Information Solicited. Information Submitted In Response To This Rfi Is Submitted At No Cost To The Government And Will Not Be Returned. Any Exchange Of Information Shall Be Consistent With Procurement Integrity Requirements, And All Appropriate Proprietary Claims Will Be Protected To Prevent Improper Disclosure. your Response To This Rfi Is Voluntary And Will Be Treated Only As Information For The Government To Consider. No Funds Have Been Authorized, Appropriated, Or Received For This Effort. The Army May Use The Information Provided To Develop Its Acquisition Strategy. If A Solicitation Is Released For The Supplies Or Services Described Herein, It Will Be Synopsized On Sam.gov. It Is The Responsibility Of The Potential Offerors To Monitor This Site For Additional Information Pertaining To This Potential Requirement. the Us Government Is Conducting Market Research For The Rapid Development, Deployment, And Continued Support Of The Us Army Mobile Low, Slow, Small Unmanned Aircraft System (uas) Integrated Defeat System (m-lids). Current M-lids Systems Consist Of Coyote Missiles With Launchers, A 30 Mm Cannon, A .50 Caliber Gun, An M240 7.62mm Crew Served Weapon, An Electronic Warfare (ew) System, An Electro-optical/infrared (eo/ir) Camera And A Ku-band Radio Frequency System (kurfs) Radar Under The Control Of A Forward Area Air Defense Command And Control (faad C2) System Mounted On A M-atv Vehicle. Future Variants Will Be Configured On A Single Vehicle Such As Stryker. All Variants Will Be Capable Of Identifying And Defeating Group 1 Through Group 3 Uas Threats. The System Shall Be Capable Of Integrating Additional Sensors And Effectors. background: The Us Army Has A Need To Develop, Produce, And Maintain Countermeasures Against Enemy-armed And Intelligence Gathering Uas's Operating At Various Speeds And Altitudes Which Are Targeting Both Us And Their Allies’ Interests At Home And Abroad. interested Firms Who Believe They Can Provide The Below Described Efforts Are Invited To Indicate Their Interest By Providing The Following Information To The Contract Specialist Listed Below: 1. Company Name, Company Address, Overnight Delivery Address (if Different From Mailing Address, Cage Code, Point Of Contact, E-mail Address, Telephone Number, Fax Number. 2. Business Size (i.e. Large, Small Disadvantaged, Veteran Owned, Woman Owned, Etc.) 3. Affirmation Of Cleared Personnel And Facilities. 4. A Description Of The Company's Expertise In Providing Manufacturing Expertise And Producing Hardware As Described Below. 5. The Company's Experience In Meeting Contractual Due Dates For Similar Type Efforts. 6. Naics Code 334511 all Responses Shall Be Unclassified. all Assumptions, Including Any Assumed Government Support, Shall Be Clearly Identified. All Proprietary And Restricted Information Shall Be Clearly Marked. interested Sources Shall Have Sufficient Logistics, Engineering, And Other Expertise To Provide All Facets Of Development, Production, And Support For The Army’s M-lids System With The Aid Of A Partial Level Ii Technical Data Package (tdp) That Is In The Format Of The Developing Contractor. Portions Of The Technical Data Are Proprietary, And Portions Are In Contractor Format. The Government Will Not Provide A Tdp In Response To This Posting. the Interested Source Shall Be Capable Of Providing Coverage, Starting Approximately January 2026, For The Following At Contract Award: 1) Maintenance And Repair For Us Army Outside The Continental United States (oconus) And Continental United States (conus) M-lids Systems Of All Variants. 2) Personnel Capable Of Maintaining And Repairing Systems To Meet The Programs Operational Availability Requirements To Multiple Conus And Oconus Sites. 3) Training For Operators And Maintainers. 4) Obtaining Spare And Repair Parts And Providing Them To Conus And Oconus Sites. The Interested Source Shall Be Capable Of Maintaining And Repairing More Than 30 Systems. the Interested Source Shall Have Sufficient Engineering Expertise To Support The Integration Of The Overall System As Well As Provide Development Activities For The Counter-uas (c-uas) And Counter-improvised Explosive Device (c-ied) Electronic Warfare Systems (without A Tdp) In Accordance With United States Government (usg) Requirements. The Development Activities Will Include Both Hardware And Software Capabilities. The Interested Source Shall Possess Or Have Access To A Facility Capable Of Testing Capability At The System And Component Level. The Interested Source Shall Have The Capability Of Identifying Obsolescence In The Components And Provide The Usg With Proposed Replacements Or Redesigns. The Interested Source Shall Provide The Usg With Solutions To Allow The M-lids System To Be Exportable. the Interested Source Shall Have The Capability To Produce, Integrate And Perform Acceptance Test Of The M-lids System Iaw Usg Requirements. The Interested Source’s Production Facility Shall Have Iso 9001 Certification. Naics Code For This Requirement Is 334511. The Estimated Production Requirement Is 70 Systems Over Five Years. this Procurement Requires The Interested Source To Operate As A Us Corporation With A Secure Manufacturing Facility Approved To The Secret Level By The Defense Security Service (dss). Further, The Defense Contract Management Agency (dcma) Will Be Asked To Conduct A Pre-award Survey Of The Firm's Facility To Determine The Capability To Successfully Fulfill The Requirements Of This Contract And To Minimize Risk To The Product Manager, Counter Unmanned Aircraft System (pdm Cuas) Office. this Rfi Will Close 30 Days From The Date Of Posting. All Questions And Responses Should Be Directed To The Contracting Officer/contracts Specialist.

Details: 12/12/2024 Update: An Sf 30 Solicitation Amendment Has Been Issued To Extend The Closing Date From December 18, 2024 At 12:00 Pm Pst, To January 2, 2025 At 12:00 Pm Pst. The Amendment Document Is Available In The Attachments Below. Please Review, Sign, And Include It With Your Complete Quote Package Before The Solicitation Closes On January 2, 2025, At 12:00 Pm Pst. Additionally, The Original “drawings” Document Has Been Updated With A Revised Version, Which Is Also Attached Below. Be Sure To Review The Updated Document. 12/10/2024 Update The Contractor Questions And Answers Have Been Posted Under The Attachments Secion Of This Solicitation Announcement. The Solicitation Drawings Will Be Updated, And The Solicitation Close Date Will Be Extended, That Solicitation/ Amendement Documentation Should Be Posted On Or Around 12/12/2024. -------------------- project Title: Carolyn Creek Trail Bridge (gaoa) the Contractor Shall Furnish All Materials, Labor, Equipment, Tools, Transportation, Supervision, Expertise, And Other Necessary Incidentals, Except As Otherwise Provided, To Successfully Complete This Project. background:this Project Consists Of Design (taking The Government Drawings To A Fabricator And Having Them Do Shop Drawings), Purchasing, Delivering, And Installing A 27-foot Span Glulam Timber Trail Bridge With Metal Railing. The Site Is Roughly One Mile Up A Hiking Trail With A 10% Grade (approx.) With Two Switchbacks And May Require The Use Of A Helicopter For Transport. In This Case, The Contractor Would Be Responsible For Coordinating The Weight Of The Various Bridge Components With The Available Helicopter. The Site Is Not Accessible By A Vehicle And The Topography Around The Existing Bridge Is Very Steep. Existing Rock/ Stacked Abutments Will Remain In Place And Be Used As Abutments For The New Bridge. A Staging Area (approx. 3,200 Sf) Will Be Made Available For Bridge Materials At The Roads End Trailhead At The End Of Lamoille Canyon Road, Which Is Where The Trail To The Site Begins. set-aside: Total Small Business Set-aside (far 19.5) magnitude: Between $100,000 And $250,000 (far 36.204(c)) the Magnitude Is Between $100,000 To $250,000. In Accordance With Far 36.204, For Construction Contracts, We Are Obligated To State The Magnitude Of A Project Using Specific Price Ranges, Both In Terms Of Its Physical Characteristics And Estimated Price Range. However, It's Crucial To Understand That These Price Ranges Are Broad Categories And Selecting One Does Not Imply That Our Budget Is At The Higher End Of That Range. The Intent Is To Give A General Sense Of The Project's Scale Without Revealing The Government's Precise Estimate. For Instance, If We Categorize A Project As Being "between $1,000,000 And $5,000,000," It Doesn't Mean Our Budget Is Close To $5,000,000. It Simply Means The Estimated Cost Falls Within That Bracket. The Actual Value Could Be Anywhere Within That Range. We Hope This Clarifies The Approach Outlined By Far 36.204. location:the Project Is Located On A Hiking Trail With No Vehicle Access. directions: 1. From Elko, Nv, Drive Southeast On Nv-227 For 20 Miles Toward Lamoille, Nv. 2. Turn Right (south) Onto Nf-660 (lamoille Canyon Road) And Drive 11.7 Miles To The Road’s End Parking Lot. 3. Hike 1.4 Miles On The Island Lake Trail To The Project Site. bridge Coordinates: 40.616571, -115.376915 period Of Performance: • Start Date: 07/14/2025 • Completion Date: 09/12/2025 • Notice To Proceed: 05/15/2025 • All Construction Work Must Be Completed No Later Than 09/12/2025. site Visit: Not Applicable contractor Questions Deadline: • Date: 12/04/2024 • Time: 12:00 Pm Pst • Submit Questions Using The Provided “contractor Questions And Answers Template.” • Send All Questions To Elizabeth.ratcliff@usda.gov Only. • Do Not Contact Anyone Else Regarding This Solicitation. request For Proposal (rfp) Close Date: • Date/time: January 2, 2025, At 12:00 Pm Pst • All Proposals Must Be Emailed To Elizabeth.ratcliff@usda.gov. No Mail Submissions (e.g., Usps, Ups) Will Be Accepted. quote Submission Instructions: 1. Ensure That You Fill Out And Return The 41 Page"rfq 1240lt25q0003" Document With Your Quote Documents. 2. Ensure That You Fill Out And Return The"j.4 - Contractor Experience Questionare"document With Your Quote Documents. 3. Ensure You Provide A "technical Capability/approach" Statement With Your Quote Documents. This Is Not An Attachment, And Must Be Drafed By The Offeror. 4. Do Not Split The Solicitation Documents. 5. Re-review The Entire 41-page Document, Including All Attachments, And Additional Documents Prior To Submission. pages To Review And Complete: • Page 2: Offer Section. Fill Out All Highlighted Sections Legibly. Use Adobe Acrobat To Complete The Document Electronically Rather Than Handwriting, As Handwritten Entries May Be Difficult To Read And Cause Issues Entering The Quote Data Into Our Contracting System. • Page 5: Enter Unit Price, Total Item Amount, And Total Amount For All Line Items. • Page 25: Complete The “foreign And Domestic Construction Materials Price Comparison” If Applicable. • Page 28: Complete Far 52.204-8 Annual Representations And Certifications (may 2024) By Selecting One Of The Highlighted Boxes. • Page 33: Complete Far 52.204-24 Representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment (nov 2021) By Marking The #1 And #2 Highlighted Boxes With The Appropriate Representation Statement. • Page 36: "review L.2 Quote Preparation Instructions" For Detailed Submission Guidelines. ensure All Required Sections Are Completed Before Submitting Your Proposal. Proposals Not Meeting The Above Requirements May Be Considered Non-compliant.

Description: This Request For Information (rfi)/ Sources Sought Is Issued Solely For Information And Planning Purposes Only And Does Not Constitute A Solicitation. notice this Rfi Does Not Constitute A Request For Quotation (rfq) Or A Promise To Issue An Rfq In The Future. Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Responders Are Advised That The Government Will Not Pay For Any Information Or Administrative Costs Incurred In Response To This Rfi. It Is The Responsibility Of The Responders To Monitor This Site For Additional Information Pertaining To This Requirement. Responses Or Questions Concerning The Composition And Requirements To The Rfi Will Not Be Returned. all Capable Contractors Are Welcome To Respond To This Notice And Shall Provide A Brief Capability Statement That Covers The Information In The Performance Work Statement. The Capability Statement Shall Be Limited To 10 Pages And No More Than 5mb. The Government Will Not Review Any Other Information Or Attachments Included, That Are More Than The 10-page Limit. The Government Will Not Review Generic Marketing Materials That Do Not Address The Information Contained Herein Or The Attached Documents. general your Response Must Address Capabilities Specific To The Services Required In The Performance Work Statement And Must Include The Following: request Company Information To Include: company Name sam Cage/ Unique Entity Id Under Which The Company Is Registered In Sam.gov/vetbiz.gov company Address point Of Contact Name telephone Number email Address socioeconomic Data company Business Size Status And Representations Of Your Business general Pricing Of Your Products/solution. Pricing Will Be Used For The Purpose Of Market Research Only. names And Types Of Current Federal Contracts And/or Contract Vehicles That Can Be Utilized For The Scope Of The Requirements. this Is Not A Request For Quotes Or Proposals. Department Of Veterans Affairs Anticipates The Award Of A One Year Firm Fixed Price Contract. Contract To Begin Date Is On March 1, 2025. The Naics Code Is 541380. all Interested Parties Shall Respond No Later Than 1/08/2025 3:00pm Est. Submit Responses To Via Email To Charles.willis@va.gov. Telephone Responses Will Not Be Accepted. statement Of Work background all Department Of Veterans Affairs (va) S Pathology And Laboratory Medicine Service Laboratories That Perform Testing On Patients Must Meet The Clinical Laboratory Improvement Act 1988 And Amendments (clia)1988 Requirements To: ensure Reliability Of Patient Testing In The Laboratory, And meet Accreditation Requirements both The Regulations In The Clinical Laboratory Improvement Amendments Of 1988 (clia) And All Laboratory Accreditation Agencies Require Clinical Laboratories To Verify Performance Characteristics Of Quantitative Test Systems. Laboratories Must Verify Performance Claims When Introducing An Unmodified, Us Food And Drug Administration Cleared Or Approved Test System, And They Must Comply With Requirements For Periodic Calibration And Calibration Verification For Existing Test Systems. They Must Also Periodically Verify The Analytical Measurement Range Of Many Quantitative Test Systems. external Linearity And Calibration Verification Program: As An Enhancement To The Internal Quality Control Program, To Ensure Reliability Of Patient Testing In The Laboratory, And To Maintain Accreditation Requirements, The Laboratory Must Subscribe To An External Linearity And Calibration Program That Meets Clia 88 Requirements For All Analytes For Which Linearity And Calibration Verifications Is Available. continuing Education Programs: As An Continuing Education Requirement, Pathologist Are Required To Obtain Maintain Continuing Medical Education Hours Per Year. b. Scope the Overall Purpose Of This Requirement Is To Obtain A Contractor To Provide A Linearity And Calibration Verification Program For The Washington Dc Va Medical Center S Pathology And Laboratory Medicine Service To Meet Its Accreditation Requirements. This Contractor Must Also Be Able To Provide Continuing Education Programs To Meet The Required Medication Education Hours For Pathologist. c. Requirements the Calibration Verification And Linearity Program Should Provide Specimen Kits For All Tests. the Contractor To Provide An Established Event Calendar And/or Shipping Table That Identifies The Dates Of Each Shipment. the Contractor To Provide A Formal Evaluation Report For All Tests Submitted.

Purchaser Name: Motor Vehicle Administration | Background And On-hold Music

Purchaser Name: Motor Vehicle Administration | Microfleece, Lightweight Jackets

Details: Introduction network Contracting Office 20 (nco20), Supporting White City Va Medical Center, Is Seeking Potential Sources For An Upcoming Requirement For A Construction Contractor That Shall Provide Services Needed To Complete The Alteration, Modification, And Partial Renovation Of Buildings 217a And 218a For Outpatient Mental Health Services At The White City Va Medical Center (wcvamc) As Described Below. This Notice Is A Market Research Tool And Has Not Been Set-aside For Any Small Business Category, However The Notice Is Issued To Determine Appropriate Set-aside Categories. Responses To This Notice, In Conjunction With Other Government Market Research Resources, Will Be Used By The Contracting Officer To Determine The Applicable Socio-economic Set-aside For The Procurement. failure To Respond To This Notice Will Not Impact Consideration Of Construction Services Companies (or Joint Ventures) Which Otherwise Meet Set-aside Requirements And Submit Responses To The Follow-up Public Announcement. Once The Appropriate Set-aside Is Determined, A Separate Public Announcement Requesting Offers/proposals Will Be Publicized On Contract Opportunities In Accordance With Far 36.213-2. general Project Description And Naics the Contractor Shall Provide All Construction Services Needed To Complete The Alteration, Modification, And Partial Renovation Of Buildings 217a And 218a For Outpatient Mental Health Services To Address Infrastructure Deficiencies And Improve The Resiliency And Capacity Of Utility Infrastructure. The Scope Of Work Includes Architectural, Mechanical, Electrical, Plumbing, Life Safety, And Structural Renovations For These Buildings, Covering An Area Of Approximately 11,500 Square Feet. The Goal Of The Project Is To Renovate The Space For Outpatient Mental Health To Comply With New Design Guidelines And Accommodate Expansion Needs. the Work Will Entail General Construction, Alterations, Site Improvements Such As Roads And Walks, Grading, Drainage, The Removal Of Existing Structures, And Other Necessary Tasks As Detailed In The Project Drawings, Specifications, And Reports. the Contractor Is Responsible For Fully Preparing The Site For Building Operations. This Includes The Demolition And Removal Of Existing Structures, Furnishing Labor And Materials, And Performing All Work Required For The White City Va Medical Center Renovation Of Spaces B217a And B218a For Mental Health Services, As Specified In The Drawings And Specifications In Accordance With The Buy American Act Far 52.225-2 And If Covered Under Any Authorized Trade Agreements Per Far 52.225-5. it Is Important To Note That The Medical Center Operates 24 Hours A Day, 7 Days A Week. Therefore, Any Service Interruptions Or Disruptions To Normal Operations Must Be Planned And Coordinated With The Contracting Officer S Representative (cor) Through Separate Action Plans To Ensure Uninterrupted Operation. before Beginning Construction, The Contractor Must Install A Construction Fence Around The Specified Construction Area. This Fence Should Be A Minimum Of Six Feet In Height. If Detailed Drawings Are Unavailable, The Contractor Should Assume A Fully Fenced Project Site. The Fence Should Include Vehicle Gates And Man Gates As Needed For Access, With Appropriate Hardware, Including Hasps And Padlocks. There Must Be A Minimum Of One Vehicle Gate That Is 12 Feet Wide And One-man Gate That Is 3 Feet Wide. All Man Gates Must Be Self-closing And Self-latching, Equipped With A Programmable Keypad. The Fence Fabric Should Be Securely Fastened To Terminal Posts With Tension Bands And To Line Posts, As Well As Top And Bottom Rails With Tie Wires, Spaced No More Than 15 Inches Apart. The Bottom Of The Fence Must Extend One Inch Above Grade, And The Fence Should Be Removed When Directed By The Cor. any Removal, Cutting, Alteration, Replacement, Patching, And Repair Of Existing Work Necessary For The Installation Of New Work Must Be Conducted As Required. Unless Otherwise Specified, Do Not Cut, Alter, Or Remove Any Structural Elements, And Seek Approval Before Disturbing Ducts, Plumbing, Steam, Gas, Or Electrical Work. Any Existing Work Identified As Defective Prior To Alteration Or Extension Must Be Reported To The Contracting Officer Before Any Disturbance Occurs. this Requirement Is Being Sought Under North American Industry Classification System Code 236220. Any Interested Party Who Believe They Can Complete This Requirement Under These Or Any Other Naics Codes Are Invited To Respond And Provide Detail As To The Naics They Can Compete This Project Under And A Brief Description As To The Reasoning. Responses Will Be Used To Research Which Code In Conjunction With Other Government Market Research Resources, Will Be Used By The Contracting Officer To Determine The Naics Code Under Which This Project Will Be Procured. information Sought The Government Requests A Letter Of Interest (or Similar Document) With Responses To The Following: 1. State Your Business Name (as It Appears In Sam.gov ), Office Location Where These Services Will Be Performed From, Sam Uei Number, Naics Code Under Which You Will Perform And Socio-economic Status Of The Firm (i.e. Verified Sdvosb, Wosb, Sb, Large Business). 2. Provide A Brief Narrative And List Sample Projects/references Completed On Your Company S Experience Providing Services Similar To Those Described. 3. What Would Be The Expected Make-up Of The Company S Team In Terms Of Socio-economic Categories And Estimated Percentage Of Work To Be Completed By Your Company And Each Subcontractor? if The Procurement Is Set-aside For Any Category Of Small Business, Generally Fifty Percent Of More Of The Work Would Need To Be Performed By The Contractor Or A Similarly Situated Subcontractor In Terms Of Percentage Of Cost. For Instance, If Set-aside For Service-disabled Veteran-owned Small Business (sdvosb), 85% Or More Of The Contract Would Need To Be Performed By Verified Sdvosbs No Other Small Business Categories Would Count Towards The Percentage. If Set-aside For Small Business, 85% Of The Contract Would Be Required To Be Performed By Small Businesses Which Would Include Performance By A Verified Sdvosb Because They Are Also A Small Business. If The Procurement Is Not Set-aside And Reaches Certain Dollar Thresholds, The Government Would Negotiate An Acceptable Subcontracting Plan To Utilize Small Business Concerns. 4. A Brief Statement Of Overall Interest In The Project If In Conjunction With Ongoing Projects. 5. Any Additional Capabilities Statements Or Other Documentation That You Feel Will Assist The Government In Performing Market Research And Determining The Appropriate Set-aside. Submission Instructions Interested Parties Are Requested To Submit The Requested Information Not Later Than January 8, 2025 To Alan Perez Via Email To Alan.perez@va.gov. Please Include Project 692-22-105 - Sources Sought Response In The Title Of The Email. The Response Burden To This Notice Is Expected To Be Light; Lengthy Responses Are Not Expected But No Maximum Page Count Is Assigned. If Sending Larger Responses And The Need To Send Multiple Emails Appending To The Email Subject 1 Of N As Appropriate. Please Contact Alan Perez At The Email Above With Any Questions.

Details: Description Invitation To Bid For The Supply/delivery Of 1,500 Liters Ultra Diesel Engine Oil, 20 Gals. Coolant, 300 Liters Super Hydraulic Oil Iso Vg68, 64 Kgs. Grease, Lithium Ep2 & 1,000 Liters 2t Oil Use For The Corrective & Preventive Maintenance Of Heavy Equipment & Service Vehicles 1. The Dpwh Samar 1st District Engineering Office, Through Sub-allotment Advice Nos. Sr2024-11-020905 Issued On November 21, 2024 Intends To Apply The Sum Of One Million Nine Hundred Forty Four Thousand Three Hundred Eight Pesos & 16/100 (p1,944,308.16) Only, Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Purchase Of Various Motor Vehicle Lubricants & Oil Under Contract Id No. 24gij019. Bids Received In Excess Of The Abc Shall Automatically Rejected At Bid Opening. 2. The Dpwh Samar 1st District Engineering Office Now Invites Bids For The Above Procurement Project. Supply/delivery Of The Goods Is Required To Start Within Thirty (30) Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project Equivalent To At Fifty Percent (50%) Of The Abc. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instruction To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Bac For Goods Secretariat And Inspect The Bidding Documents At The Address Given Below During Monday To Friday At 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 19, 2024 To January 7, 2025 From The Given Address And Website/s Below & Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only (php. 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented In Person. 6. The Department Of Public Works And Highways, Samar 1st District Engineering Office, Calbayog City, Samar And/or Through Livestreaming Via Youtube Page Https://www.youtube.com/channel/ucqd9pwlefppb7qxqvsgbfyg Will Hold A Pre-bid Conference On December 26, 2024 @3:00pm At Conference Room, Dpwh Samar 1st District Engineering Office, Calbayog City, Samar, Which Shall Open To Prospective Bidders. Page 1 Of 2 Contract Id No. 24gij019 Ib 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be On January 7, 2025 At 9:00 Am At Conference Room, 2nd Floor, Dpwh-samar 1st District Engineering Office, Brgy. San Policarpo, Calbayog City, Samar And/or Through Livestreaming Via Youtube Page Https://www.youtube.com/channel/ucqd9pwlefppb7qxqvsgbfyg. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. Late Bids Shall Not Be Accepted. 9. The Dpwh-samar 1st District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Bac Chairperson: Bac Secretariat Head: Raymond Jay R. Panlilio Anna Melissa M. Ignacio Assistant District Engineer Procurement Staff Office Address: Dpwh-samar 1st Deo, Calbayog City Address: Dpwh-samar 1st Deo, Calbayog City Telephone No. (055)2091473 Local 68011 Tel. Nos (055)2091473; 2094627 Local 68010 Email Address: Lazana.albert@dpwh.gov.ph Email Address: Ignacio.anna_melissa@dpwh.gov.ph 11. You May Visit The Following Websites For Downloading Of Bidding Documents: Philippine Government Electronic Procurement System (philgeps) @ Https://notices.philgeps.gov.ph/ And Department Of Public Works & Highways (dpwh) Website @ Https://www.dpwh.gov.ph/dpwh/business/procurement/gs/advertisement Approved By: Noted By: Raymond Jay R. Panlilio Raulito F. Yangzon Bac Chairperson Oic-district Engineer Date Of Issue: December 16, 2024