Valve Tenders

Details: Description Invitation To Bid The City Of Bayawan, Through Its Bids And Awards Committee (bac), Invites Suppliers / Manufacturers / Distributors / Contractors To Bid For The Hereunder Projects: Lot No. I Tarpaulin Printing 1 4 Lot "labor And Materials ( Tarpaulin Printing ) 4 Sets - 2' X 4' (signage)" Lot No. Iii Sand & Gravel 4 7 Cu.m. Sand, Washed, Mixing/screened 5 8 Cu.m. Gravel, Mixing, Crushed, Screened & Washed, Max. Size 38mm Dia Lot No. V Construction Supplies/materials 16 72 Kg/s Tie Wire, # 16 17 3 Kg/s Nylon, #100 18 5 L.m. Mesh Wire, 3mm Eyehole X 0.90m Width (m) 19 15 Pc/s Blade, Hacksaw, 12mm X 300mm, 18tpi, (excellent Quality) 20 5 Kg/s Nails, Concrete, 75mm 21 6 Kilo/s Nails, Umbrella/roofing, 62mm 22 2 Box/es Nails, Common Wire, 100mm (25kgs/box) 23 1 Box/es Nails, Common Wire, 75mm (25kgs/bx) 24 1 Box/es Nails, Common Wire, 62mm (25kgs/box) 25 1 Box/es Nails, Common Wire, 38mm (25kgs/box) 26 3 Box/es Rod/electrode, Welding, E6013, 1/8" (bx)) (matchless Quality, Iso 9001, 2000 Certified, 20 Kg/box) 27 6 Pc/s Drill Bit, Masonry, 1/8" Dia 28 9 Pc/s Drill Bit, 1/8" Dia, For Steel 29 3 Pc/s Drill Bit, 3/16" Dia, For Steel 30 3 Pc/s Drill Bit, 1/4" Dia, For Steel 31 3 Pc/s Drill Bit, 3/8" Dia, For Steel 32 3 Pc/s Drill Bit, Masonry, 3/16" Dia 33 3 Pc/s Drill Bit, Masonry, 1/4" Dia 34 3 Pc/s Drill Bit, Masonry, 3/8" Dia 35 13 Pc/s Cutting Disc, Masonry/concrete, 100mm 36 10 Pc/s Cutting Disc, 100mm Dia, For Metal 38 5 Can/s Silicon Sealant, (300ml/can), For Polycarbonate 39 2 Can/s Sealant, Elastomeric/roof (1 Lit/can) 40 2 Can/s Solvent Cement, Pvc (500 Cc/can) 41 2 Roll/s Sack Cloth, 2.40m Width (100m/roll), Blue 42 10 Can/s Epoxy All Purpose (a And B), 1/4 Lit/can, Non Conductive, All Purpose Adhesive 43 50 Set/s Lag Screw, 6mm Dia. X 32mm With Expansion Shield 44 200 Set/s Bolt, Fine Threaded, 3.5mm X 25mm, With Nut And Washer 45 1 Sheet/s Steel Plate, G.i., Gauge # 16 X 1.2m X 2.4m 46 20 Pc/s Tiles, Granite, Polished, 0.60m X 0.60m, Color: Jet Black 47 65 Pc/s Tiles, Floor, Ceramic, 40cm X 40cm Non Skid 48 14 Pc/s Staircase Nosing, Brass Ochre (2m/length) 49 6 Pack/s Tile Grout (2kg/pk), Light Beige 50 1 Can/s Acrylic Spray Paint, Flat Black(400cc/can) 51 1 Lit/s Paint, Enamel, Quick Dry (lit), Red 52 10 Gal/s Paint, Rubberized (gal), Chlorinated, Floor Coating, Marking Yellow Or Equivalent 53 5 Gal/s Paint, Rubberized (gal), Chlorinated, Floor Coating, Black 54 12 Gal/s Paint, Rubberized (gal), Chlorinated, Floor Coating, White Or Equivalent 56 1 Gal/s Paint, Epoxy, Silver Finish With Aluminum With Catalyst 57 15 Gal/s Paint, Epoxy, Enamel, Black (gal) 58 4 Gal/s Enamel Paint, Silver Finish Aluminum (gal) 59 3 Can/s Thinner, Lacquer (3.75lit/can) 60 11 Gal/s Reducer/thinner, Epoxy Paint (gal) 61 8 Gal/s Adcoat Rust Converter And Primer 62 6 Gal/s Liquid Tile Paint, Primer White Acrylic Solvent-based Primer 63 6 Gal/s Liquid Tile, Topcoat Gloss White 64 4 Gal/s Liquid Tile, Top Coat Clear 65 5 Can/s Liquid Tile, Solvent Based-tinting Color Venetial Red, 1/4lit Per Can 66 5 Can/s Liquid Tile, Solvent Based-tinting Color Thalo Blue, 1/4lit Per Can 67 5 Can/s Liquid Tile, Solvent Based-tinting Color Thalo Green, 1/4lit Per Can 68 5 Can/s Liquid Tile, Solvent Based-tinting Color Hanza Yellow, 1/4lit Per Can 69 5 Can/s Liquid Tile, Solvent Based-tinting Color Lamp Black, 1/4lit Per Can 70 5 Gal/s Liquid Tile, Reducer Clear Liquid 71 10 Gal/s Plexibond, Cementitious Waterproofing System, Acrylic 72 10 Pc/s Sand Paper, #80, 225mm X 275mm 73 10 Pc/s Sand Paper, #100, 225mm X 275mm 74 10 Pc/s Sand Paper, #120, 225mm X 275mm 75 10 Pc/s Sand Paper, # 180, 225mm X 275mm 76 14 Pc/s Paint Roller W/ Handle, 100mm 77 150 Meter/s Service Drop Wire, # 4 Awg (m) 78 5 Pc/s Service Grip, # 2 79 4 Pc/s Service Grip, Dead End Performed Type, Size # 4awg 80 1 Length/s Pipe, Pvc, 40mm Dia X 3m, W/ Entrance Cap, Clip Type 81 70 Meter/s Thw Wire, # 4 (22mm2), Black (m) 82 70 Meter/s Thw Wire, # 4 (22mm2), White (m) 83 40 Meter/s Thw Wire, # 6 (14mm2), Stranded(m), Green 84 1 Roll/s Thw Wire, # 10 (5.5mm2), Stranded (150m/bx), Black 85 1 Roll/s Thw Wire, # 10 (5.5mm2), Stranded (150m/bx), White 86 1 Roll/s Thw Wire, # 10 (5.5mm2), Stranded (150m/bx), Green 87 6 Roll/box Thw Wire, # 12 (3.5mm2), Stranded (150m/roll/bx), Black 90 1 Length/s Pipe, G.i. 65mm Ø X 6m, Wt=5.20mm , Outside Dia= 73.00, 8.694kg/m, Heavy Gauge 92 1 Pc/s Circuit Breaker, 100a, 2 Pole, Bolt-on, Single Phase W/ Casing, Outdoor Type 93 1 Pc/s Circuit Breaker, 30a, 2 Pole, Bolt-on 94 3 Pc/s Circuit Breaker, 20a, 2 Pole, Bolt-on, Single Phase W/ Casing, Outdoor Type 95 4 Roll/s Royal Cord, # 14 Awg, 2 Wire (75m/roll) 96 7 Length/s Pipe, Pvc, Electrical, 40mm Dia X 3m, Thickwall, Orange 97 200 Length/s Pipe, Pvc, Electrical, 25mm Dia X 3m, Thickwall, Orange 98 150 Length/s Pipe, Pvc, Electrical, 20mm Dia X 3m, Thickwall, Orange 99 3 Pack/s C-clamp/clip, Pvc, 20mm Dia, W/ Concrete Nails (100's/pk) 100 6 Pack/s C-clamp/clip, Pvc, 25mm Dia W/ Concrete Nails (100pcs/pk) 101 3 Pack/s Pipe Connector, Pvc, Electrical, 20mm Dia (100's/pk)) 102 3 Pack/s Pipe Connector, Pvc, Electrical, 25mm Dia (100pcs/pk) 103 10 Pc/s Connector, Split Bolt, # 6 (14mm2), Burndy 104 3 Set/s Magnetic Contactor, 40a 220-240vac Coil W/ Metal. Enclosure 105 2 Pc/s Photo Control (photo Switch), 220v, 6a, Operating Illumination: Turn-on At 31.5 Lux, Turn-off At 125 Lux 106 2 Unit/s Timer, Time Switch, 24hr Back Up 107 50 Roll/s Tape, Electrical, Vinyl, .177mm X 3/4"/19mm X 16m, Flame Retardant, 600v 108 5 Roll/s Tape, Electrical, Rubber, 18mm X 5m, Self Fusing Ethylene Propylene Rubber 109 5 Roll/s Tape, Electrical, Waterproof, 600v 111 29 Set/s Recessed Ground Lamps, Ip67 1w, Ac85-265v Dc 12v (1 Side), Natural White (4000k), 42mm X 70mm 113 8 Set/s Metal Hallide Flood Light Fixture 250w Set With Tubular Metal Hallide Bulb (firefly), Warm White, Model: Flh 121/s/250/fhimh 250dl/t 114 10 Set/s Solar Blinker Arrow Signage Warning Lights, Direction Signs, Size: Length:47"; Height:42", Arrow Sign, Size: Length: 47"; Height:16", Solar Panel Size: 10" X7", Led Color: Red, Ip Grade: Ip54 119 18 Set/s Lamp Post, Steel Tapered, Single Arm,t-6-30' Sb Bracket Type, W/ Base Plate, Anchor Bolt, Nut & Washer, Electroplated Silver Finish, Amco 120 6 Set/s Lamp Post, Steel Tapered, Double Arm, T-6-30' Db Double Arm, Bracket Type, W/ Base Plate, Anchor Bolt, Nut & Washer, Electroplated Silver Finish 122 32 Pc/s Led Fountain Lights, Rgb With Stainless Steel Toughed Glass Cover, Ac 220; Dc 12-24v Dmx 512 Built In Control With Decoder, 9x3w Led Rgb Color Changing 2700-6500k Ip68 Water Proof Grade Junction Box 124 5 Roll Cable Wire; 5c X 16 Twg/1.025mm Premium Multi-conductor Royal Cable Wire (75m/roll) 126 32 Set/s Fountain Nozzle, 1.0" Dn40 Female Thread Flower Column Style Fountain Nozzle Sprinkler Spray Head, Brass 127 1 Unit/s 37.5 Kva Ditribution Transformer, 7620/13200vy - 240/480 Volts Oisc, W/ 2-2½, Taps Above And N.v., Fuse Link, Fuse Cut-out And Accessories 128 2 Meter/s Fuse, Cut-out, 100a, 25kv, Ab Chance 129 1 Set/s Transformer Cluster Hanger, With Complete Accessories 130 1 Pc/s Clamp, Hot Line, #2 - #4/0 Acsr 131 3 Set/s Pull Box, Metal Enclosure, 900mm X 200mm X 150mm, With Cover 132 50 Pc/s Screw, Lag Screw, 10mm Dia X 50mm, W/ Plain Washer And Expansion Shield 133 200 Pc/s Bolt With Nut And Washer, (fine Thread) 3.5mm Dia X 25mm 134 200 Pc/s Bolt With Nut And Washer, (fine Thread) 4.5mm Dia X 25mm 135 5 Pack/s Ubolt Galvanized/ U Bolt With Nut And Washer Inches For Gi Pipe Screw Depot, 1/4 For 3", 1/4" Dia, 10 Pcs Per Pack 139 30 Gal/s Concrete Epoxy, With Low Viscosity For Construction 140 22 Length/s Pipe, Upvc, 20mm Outside Dia, Wt=1.8min, L=3.0m, Blue 141 12 Pc/s Tee, Upvc, 20mm Inside Dia, Blue 142 14 Pc/s Elbow, Upvc, 20mm Inside Dia X 90 Deg. Bend, Plain, Blue 143 4 Pc/s Tee Reducer, Upvc,32mm X 20mm Nominal Dia, Blue 144 3 Pc/s Tee, Upvc, 25mm Inside Dia, Plain, Blue 145 4 Pc/s Adaptor, Upvc, Male, 20mm Dia., Nominal Size, Blue 146 8 Pc/s Adaptor, Upvc, Female, 20mm Dia Nominal Size, Blue 147 4 Pc/s Ball Valve, Pvc, 20mm Outside Dia 148 10 Length/s Pipe, Upvc, 32mm Outside Dia, Wt=2.0min, L=3.0m, Blue 149 1 Pc/s Gate Valve, 25mm Dia, Brass/bronze 150 1 Pc/s Check Valve, 25mm Dia, Brass/bronze 151 2 Pc/s Adaptor, Upvc, Male, 25mm Dia., Nominal Size, Blue 152 8 Length/s Pipe, Upvc, 50mm Outside Dia, Wt=2.30min, L=3.0m, Blue 153 2 Pc/s Elbow, Upvc, 50mm Outside Dia X 90 Deg. Bend, Plain, Blue 154 2 Pc/s Elbow, Upvc, 50mm Outside Dia X 45 Deg. Bend, Plain, Blue 155 2 Pc/s Adaptor, Upvc, Female, 50mm Outside Dia., Blue 156 3 Pc/s Gate Valve, 40mm Dia, Brass/bronze 157 5 Pc/s Check Valve, Horizontal Swing 40mm Dia, Brass/bronze 158 6 Length/s Pipe, Upvc, 50mm Outside Dia, Wt=2.30min, L=3.0m, Blue 159 2 Pc/s Tee, Upvc, 32mm Inside Dia, Blue 160 2 Pc/s Adaptor, Upvc, Female, 50mm Outside Dia., Blue 161 4 Pc/s Elbow, Upvc, 50mm Outside Dia X 90 Deg. Bend, Plain, Blue 162 2 Pc/s Elbow, Upvc, 50mm Outside Dia X 45 Deg. Bend, Plain, Blue 163 4 Length/s Pipe, Pvc, 57.15mm Outside Dia X T=2.54mm X L=3.0m, S-1000, Orange 164 2 Pc/s Elbow, Pvc, 57.15mm Inside Dia X 90 Deg. Bend, S-1000, Orange 165 2 Pc/s Elbow, Pvc, 57.15mm Inside Dia X 45deg Bend, S-1000, Orange 166 8 Length/s Pipe, Pvc, 82.55mm Outside Dia X T=3.75mm X L=3.0m, S-1000, Orange 167 2 Pc/s Pvc Tee, Inside Dia: 82.55mm, S-1000, Orange 168 2 Pc/s Floor Drain, 150mm X 150mm Dia, Stainless 169 8 Length/s Pipe, Pvc, 107.10mm Outside Dia X T=3.81mm X L=3.0m, S-1000, Orange 170 2 Pc/s Elbow, Pvc, 107.10mm Inside Dia X 90 Deg. Bend, S-1000, Orange 171 2 Pc/s Pvc Elbow, Inside Dia: 107.10mm X 45 Deg Bend, S-1000, Orange 172 1 Pc/s Gate Valve, 100mm Dia, Brass/bronze 173 1 Pc/s Gate Valve, 80mm Dia, Brass/bronze, Threaded Type 174 3322.536611 Sq.ft. Brass Metal Etching Engraved Marker 175 5 Pc/s Hat, Hard, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, Brown 176 20 Pc/s Hat, Hard, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, Yellow 177 20 Pc/s Vest, Reflectorized, Safety, Orange 178 20 Pair/s Raincoat, Jacket W/ Hood & Pants, Size: X-large With Reflectorized Strips 179 15 Pc/s Plastic Road Barriers 180 20 Pc/s Spectacles, Safety Goggles, Clear 181 8 Pair/s Gloves, Welding Leathear Long, 16', Ce Certified En 12477 182 5 Roll/s Caution Tape, Yellow, 3" X 50' 183 5 Roll/s Danger Tape, Red, 3" X 50' 184 15 Pc/s Traffic Cones 28" Tall, 14" X 14" Base With Reflective Collars Lot No. Vi Road Stud Installation 137 1 Set/s Solar Road Stud Installation Machine, Equipped With Running Wheel, Accurate Hole Position With Good Hole Forming Quality, 5.0hp, 220v With 3900w 50/60hz, 570rmp; Height: 800mm; Weight: 200kgs; Pure Copper Self-priming Pump, Manual Electric Starter, Free Adjustment Depth And Bearing Seat Assembly Complete With Coring Bit And Other Accessories ** ** ** Nothing Follows ** ** ** Bid Documents Shall Be Available At The Bac Office, New City Hall, Lgu Bayawan City Upon Payment Of Prescribed Non-refundable Fee In The Amount Of Php 5,000.00 Bidders Shall Drop Their Technical And Financial Proposals In The Bid Box At The Bac Office, Bayawan City On Or Before The Deadline Of Submission Of Bids As Shown Below. All Particulars Relative To Eligibility Process, Opening And Evaluation Of Bids, Postqualification And Award Of Contract Shall Be Governed By The Applicable Provisions Of Ra. 9184. The City Of Bayawan Reserves The Right To Reject Any Or All Bids, To Waive Any Defects Or Formality Therein And To Accept Bids Considered Responsive And Most Advantageous To The Government. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule Issuance Of Bid Documents December 17, 2024 To January 6, 2025 @ 5:00 Pm Pre-bid Conference December 26, 2024 @ 9:00 Am Deadline/opeing Of Bids January 7, 2025 @ 9:00 Am Post Qualification January 14, 2025 @ 9:00 Am Awarding Of Bids January 21, 2025 @ 9:00 Am Approved: (sgd)virginia D. Sadiasa City Civil Registrar Bac Chairman Received By: Name:___________________________ Date:___________________________ Geps Publication : Geps December 17, 2024 Newspaper : None

Description: CATEGORY: 14 4320 000007 43 4320 00007 WASHER THRUST WASHER THRUST OLITE Drg No IMPD 1144 A Spec No CQAE 4320 1327 d , 43 5305 015936 SCREW CH HD 4 point 75 MM 3 16 BSW 11MM LONG , 43 4320 000014 GLAND TOP BOTTOM PACKLESS Drg No IMPD 1151 D Spec No CQAE 4320 1327 d , W1 4320 000025 43 4320 000025 CAP SPIGOT TERMINAL Drg No IMPD 1162 B Spec No CQAE 4320 1327 d , 43 4320 000022 BUSH OILITE BOTTOM Drg No IMPD 1159B IMGA 0092 H and ccnnected drgs Spec No CQAE 4320 1327 d , X3 IXC GL SK 1477 TOMMY BAR 9 point 5 X 125MM LONG STEEL ST 58 , X3 IXC GL 500 4055 18 X3 4320 000414 STARTING ROPE 7 point 5X1150MM LONG NYLON CORD , X3 IXC GL SK 2241 X3 IXC GL SK 2211 SPANNER TUBULAR 17 AF 115 MM LONG , X3 3020 001210 INSERT FLEXIBLE COUPLING , 4930000458 SK 6946 X3 IXC GL SK 6946 GUN GREASE PUSH TYPE CAPACITY 150 CC , 43 4320 000028 WASHER LEATHER Drg No IMPD 1165 Spec No CQAE 4320 1392 e , W1 4320 000893 43 4320 000893 SPANNER FOR SPINDLE NUT , 5315000191 X3 5315 005791 PIN COTTER SPLIT 3 point 2MM DIA X 25MM LONG , 43 3040 000027 TERMINAL SPIGOT FOR 22 MM Drg No IMPD 0970 D Spec No CQAE 3040 1479 b , 43 4320 000028 TERMINAL SOCKET FOR 22MM Drg No IMPD 0972 A Spec No CQAE 3040 1479 b , 43 3040 000014 SHAFT ASSEMBLY FLEXIBLE 22X2440MM 8 FT Drg No IMSA 0161 E and connected drawings Spec No CQAE 3040 1479 b , 43 3040 000008 SHAFT ASSEMBLY FLEXIBLE 17 point 5MM X 7320MM 24FT Drg No IMSA 0161 E and connected drawings Spec No CQAE 3040 1478 b , 43 3040 000006 SHAFT ASSEMBLY FLEXIBLE 17 point 5MM X 2440MM 8 FT Drg No IMSA 0161 E and connected drawings Spec No CQAE 3040 1478 b , WA 6645 43 WA 6645 EXTRACTOR FDE BALL BEARING OUTER Drg No IMSA 0163 A , LV MT7 3110 000111 LV6 MT7 3110 000111 BEARING BALL SKF 6205 Spec No CQAE 4320 1392 e , W1 4820 008739 43 4820 003739 VALVE STOP LIFT CHECK 50 point 8 2 INCH FULL WAY Drg No IMSA 0431 IM 0625 A and connected drawings , 4730005837 43 4730 005837 STAINER SUCTION HOSE FRAME TYPE Drg No IM 0624 , W1 4720 000114 43 4720 000114 NOZZLE BRANCH PIPE FIRE HOSE 31 point 75MM 11 by 4 IN Drg No lM 0256 D connected drawings , W1 4320 000887 43 4320 000887 BRANCH PIPE 50 point 8MM 2 Inch Drg No lM 0256 D connected drawings , 43 4730 005838 ADOPTOR STRAIGHT PIPE TO HOSE ROD ANTI TWISTER , 5140000145 X3 5140 000145 TOOL BOX PRTABE SIZE 257 X 115 X 300 MM HEIGHT X 1MM THICK , 43 3040 000007 SHAFT ASSEMBLY FLEXIBLE 17 point 5X4880MM 16 FT , 43 4320 000003 Pump Water Centrifugal 38 pt 1mm 10920 LPH 15 pt 2M Head 1 1 by 2 in 2400 GPH 50ft Head Flexible Shaft Driven Drg No IMGA 0092 G IMGA 0092 H Spec No CQAE 4320 1327 d , 5310015548 X3 5310 015548 NUT PLAIN HEXAGON STEEL 5.5M 16X1 point 5 ZINC PLATED , 432000026 43 4320 000026 NUT COUPLING CASING END Drg No IMGA 0092 H IMPD 1163 A and connected drgs Spec No CQAE 4320 1327 d , 4320 00027 43 4320 000027 NIPPLE COUPLING CASING END Drg No IMPD1164 A , 5340009268 X3 5340 009268 MOUNT RESILIENT DUNLOP 31 406 1 MN 40 , W1 WA 1534 HOSE UNION FEMALE 2 IN BSP Spec No IND GS 1201IND TC 2462 e , 43 2815 004330 ASSEMBLY PACKING BOX Drg No IMSA 0309

Description: This Is A Sources Sought Notice For Informational Purposes Only. this Is Not A Request For Offers Or Proposals. It Does Not Constitute A Solicitation And Shall Not Be Construed As A Commitment By The Government. Responses In Any Form Are Not Offers And The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. the 439th Contracting Flight Located At Westover Air Reserve Base (warb), Chicopee, Ma Is Seeking Capabilities Packages Of Potential Sources To Supply And Deliver A Mini-compact Excavator. 439 Ce/cer Requests The Purchase Of A Mini-compact Excavator. The Vendor Shall Furnish All Equipment And Materials Unless Otherwise Specified. No Alteration, Additions, Or Deletions Shall Be Made To Salient Feature List For The Mini-compact Excavator, salient Features Include: base Civil Engineering Requires A Reliable And Efficient Compact Excavator To Support Our Construction And Landscaping Operations. The Existing Excavator Is No Longer Serviceable, And A Replacement Is Necessary To Ensure Continuous Productivity And Efficiency. objectives: The Objectives Of This Procurement Are To: acquire A Reliable Compact Excavator: Purchase A Compact Excavator That Meets The Specifications And Requirements Outlined Below, Ensuring Reliable And Efficient Operation. meet Operational Requirements: Provide An Excavator That Can Perform A Variety Of Tasks, Including E.g., Digging, Trenching, Lifting, Etc. ensure Operator Safety And Comfort: Acquire An Excavator That Provides A Safe And Comfortable Working Environment For Operators, Including Air-conditioned/heated Enclosed Cab, Ergonomic Controls, Etc. comply With Safety And Regulatory Requirements: Ensure The Excavator Meets Or Exceeds All Applicable Safety And Regulatory Standards key Performance Requirements: The Compact Excavator Must Meet The Following Key Performance Requirements: engine Power: The Excavator Must Have A Minimum Of 42.6 Hp, Turbocharged 1.8l, Tier 4 Diesel Engine With Non-dpf Auto Idle. transmission: The Excavator Must Have An Auto-shift, Two-speed Travel Transmission. hydraulic System: The Excavator Must Have Auxiliary Hydraulics With Selectable flow And Arm-mounted flush Face Quick Couplers. cab And Operator Station: The Excavator Must Have A Canopy, Retractable Seat Belt, And Vinyl Suspension Seat. The Cab Must Also Have An Instrument Panel, Hydraulic Joystick Controls, Keyless Start, And A Lift Eye. safety Features: The Excavator Must Have roll-overprotective Structure (rops) That Meets The Requirements Of Iso 12117-2: 2008 a Tip-overprotective Structure (tops) That Meets The Requirements Of Iso 12117: 2000, falling Object Protective Structure (fops) That Meets The Requirements Of Iso 10262. attachments: The Excavator Must Be Compatible With The Following Attachments: hydraulic Long Arm hydraulic Clamp (thumb) - Long Arm - Class Iv With Diverter Valve bucket- 24'' Standard Duty Trenching Diggingbucket equipment Requirements: The Compact Excavator Must Come With The Following Standard Equipment: led Work Lights: Led Work Lights To Provide Adequate Illumination For Nighttime Operations. control Console Locks: The Excavator Must Have Control Console Locks To Prevent Unauthorized Use. display: Display With Touch Display, Radio, And Bluetooth. travel Motion Alarm: Travel Motion Alarm To Alert Operators Of Potential Hazards. enclosed Cab: Enclosed Cab With Auto Hvac. deliverables: The Successful Vendor Must Provide The Following Deliverables: compact Excavator: A Compact Excavator That Meets The Specifications And Requirements Outlined Above. operator Training: Operator Training And Support To Ensure The Excavator Is Properly Operated And Maintained. warranty And Support: A Comprehensive Warranty And Support Package, Including Any Maintenance Or Repair Services Offered. The Following Timeframe For Repairs Shall Apply: Minor Repairs Replacement Of Worn Or Damaged Parts): 7-10 Business Days. Major Repairs (e.g., Engine, Transmission Or Hydraulic System Repairs): 30 Business Days. delivery And Installation: Delivery And Installation Of The Excavator, Including Any Necessary Setup And Testing. special Requirements: Our Intent Is To Award This Project As A 100% Small Business Set Aside. Contract Type Will Be Firm-fixed Price. The Anticipated Performance Time Is 90 Aro. The Naics Code Assigned To This Acquisition Is 333120 With A Size Standard Of 1250 Employees. all Interested Vendors Are Highly Encouraged To Submit A Capability Package To The Primary Point Of Contact Rosalie.connelly.1@us.af.mil Or Kyle.kalagher.1@us.af.mil Via Email, By 2:00pm Est On Friday, 14 February 2025. the Following Information Should Be Inlcuded In Response: (a) Business Name, Address, Cage Code, Size Classification Based On Naics Size Standard, Socioeconomic Classification (i.e. Hubzone, 8(a), Sdvosb, Wosb Etc.), And A Point Of Contact; (b) A Positive Statement Of Your Intention To Submit An Offer For This Solicitation As A Vendor; (c) Evidence Of Your Experience Performing Work Similar In Type And Scope Of Work In This Announcement Within The Last Five Years. The Evidence Should Include Contract Numbers, Project Titles, Dollar Amounts And Point Of Contacts With Telephone Numbers. there Is No Solicitation At This Time. Funds Are Not Presently Available. This Is A Request For Information Only And Any Information Provided Is Voluntary. Telephone Inquiries Will Not Be Accepted. If A Solicitation Is Issued, It Will Be Announced At A Later Date. All Interested Parties Must Respond To The Solicitation Announcement Separately From The Response To This Notice And Are Responsible For Monitoring Sam.gov Website For The Posting Of Any Solicitation Or Subsequent Updates. note: Vendors That Are Debarred, Suspended, Or Proposed For Debarment Are Excluded From Receiving Contracts. Agencies Also Shall Not Consent To Subcontract With Such Contractors. Proposals Prepared By Debarred, Suspended, Or Otherwise Ineligible Vendors Are At The Risk And Expense Of The Vendor. all Prospective Vendors Must Be Registered In The System For Award Management (sam) System, In Order To Be Eligible For An Award.

Description: 829921690010 srph346350-vacutainer Needle With Visibility Of Blood Entry 21g For Multi-sample Colle ction Should Have The Following Specifications: 1). The Designing Of The Needles Should Be Such Th at It Can Able To Minimize The Pre- Analytical Variability Throughout The Specimen Collection And H andling Process To Ensure Reliable Results And Should Be Suitable For Faster Procedures. 2). The needles Should Be Suitable For Closed- System Blood Collection I.e Drawing Blood Directly From T he Vein Into Vacuum Collection Tubes To Prevent Exposure Of Atmosphere. 3). The Needles Should B e Suitable For Multi- Sample Collection.4). Needles Should Be Sterile, Double-ended With A Sleeve C overed Safety Valve For Use With Vacutainer Tube Holder And Vacuum Blood Collection Tubes. 5). S ize Of The Needle Should Be 21g X 1 Inch (gauge: 21g, Length: 1 Inch./25 Mm).6) Needle Design Should provide Instant Confirmation Of Needle Placement, Through Visual Flashback Indication.7). There S hould Be A Chamber Or Similar Arrangement At The Needle Junction For Easy Visual Confirmation Of blood Flow Entry.8). Needle Should Have Low-angle Bevel Design And Should Be Coated With Silico ne/ Similar Low Friction Lubricant Coating To Ensure Gentle And Smooth Vein Entry (for Smooth Pai nless Pricking To The Patients 9). The Firm Should Provide Certificate Of Compliance Report For Eve ry Batch And Material Used For Making The Needle And Sterilization Of The Needle Should Comply W ith Iso Standards.10). The Product Should Be Bis/iso/ce/us Fda Certified And Should Produce The Ce rtificate While Quoting In The Tender.11). The Firm Should Supply Suitable Needle Holders Along Wit h The Needle Supply And Also Should Submit Adequate Sampling Material For Checking Suitability & for Validation, Verification Of Productunit:no ] consignee Acms/drug Stores/rh/pgt, Sr Kerala 1000.00 Numbers

Description: 829921690010 srph346350-vacutainer Needle With Visibility Of Blood Entry 21g For Multi-sample Colle ction Should Have The Following Specifications: 1). The Designing Of The Needles Should Be Such Th at It Can Able To Minimize The Pre- Analytical Variability Throughout The Specimen Collection And H andling Process To Ensure Reliable Results And Should Be Suitable For Faster Procedures. 2). The needles Should Be Suitable For Closed- System Blood Collection I.e Drawing Blood Directly From T he Vein Into Vacuum Collection Tubes To Prevent Exposure Of Atmosphere. 3). The Needles Should B e Suitable For Multi- Sample Collection.4). Needles Should Be Sterile, Double-ended With A Sleeve C overed Safety Valve For Use With Vacutainer Tube Holder And Vacuum Blood Collection Tubes. 5). S ize Of The Needle Should Be 21g X 1 Inch (gauge: 21g, Length: 1 Inch./25 Mm).6) Needle Design Should provide Instant Confirmation Of Needle Placement, Through Visual Flashback Indication.7). There S hould Be A Chamber Or Similar Arrangement At The Needle Junction For Easy Visual Confirmation Of blood Flow Entry.8). Needle Should Have Low-angle Bevel Design And Should Be Coated With Silico ne/ Similar Low Friction Lubricant Coating To Ensure Gentle And Smooth Vein Entry (for Smooth Pai nless Pricking To The Patients 9). The Firm Should Provide Certificate Of Compliance Report For Eve ry Batch And Material Used For Making The Needle And Sterilization Of The Needle Should Comply W ith Iso Standards.10). The Product Should Be Bis/iso/ce/us Fda Certified And Should Produce The Ce rtificate While Quoting In The Tender.11). The Firm Should Supply Suitable Needle Holders Along Wit h The Needle Supply And Also Should Submit Adequate Sampling Material For Checking Suitability & for Validation, Verification Of Productunit:no ] consignee Acms/drug Stores/rh/pgt, Sr Kerala 1000.00 Numbers

Details: Description Request For Proposal The Bureau Of Fisheries And Aquatic Resources Regional Office No. 5 (bfar Ro 5), Fabrica, Bula, Camarines Sur Is Requesting From Prospective Suppliers To Submit Written Proposal For The Supply And Delivery Of Feeds, Prophylaxis, And Hatchery Materials. Quantity Unit Item Description Unit Cost Total Cost 4 Box Artemia Cysts, 18-24hrs Ep, 90-95% Hr, 12cans/box@ 16oz./can, Super Tiny Nauplii 46,800.00 187,200.00 5 Kg. Oxytetracycline 3,100.00 15,500.00 5 Plastic Can Polytase, 200grms/can 2,800.00 14,000.00 1 Bag Edta, 25kgs/bag 40,000.00 40,000.00 2000 Piece Air Control Valve, L Type 30.00 60,000.00 10 Pack Japonicus #0, 1kg/pack 1,200.00 12,000.00 5 Pail Brine Shrimp Flakes, 5 Kgs Capacity 5,000.00 25,000.00 5 Piece Skeletonema Bag 600.00 3,000.00 5 Kg. Rubber Band, Hd 300.00 1,500.00 5000 Piece Pe Plastic Bag, 14” X 22” 8.00 40,000.00 Conditions: To Be Delivered Within Thirty (30) Calendar Days Upon Receipt Of The Purchase Order By The Supplier At Bfar-mshrl, Mercedes, Camarines Norte. Together With The Written Proposal, The Participating Prospective Suppliers Shall Also Submit The Following Requirements: 1. Mayor’s/business Permit 2. Philgeps Registration No. 3. Omnibus Sworn Statement 4. Income/business Tax Return (for Abcs Above 500k) The Approved Budget For The Contract (abc) Is Three Hundred Ninety Eight Thousand Two Hundred Pesos (php398,200.00) Only. All Written Proposals Shall Be Submitted To The Office Of The Bac Secretariat, Bfar 5, Fabrica, Bula, Camarines Sur Before 1:00 O’clock In The Afternoon Of February 10, 2025, Which Shall Be Opened And Evaluated By The Bac Thereafter At The Office Of The Bac Secretariat At The Same Address. This Requisition Is Made Thru Alternative Mode Of Procurement Under Rule Xvi Of The 2016 Revised Irr Of Ra 9184, Specifically Small-value Procurement Under Section 53.9, As Per Prior Recommendation Of The Bids And Awards Committee. For Inquiries, You May Contact Ms. Aries C. Tang @ 09161135185 Or You May Visit The Office Of The Bac Secretariat At The Bfar 5, Fabrica, Bula, Camarines Sur. Bfar Ro 5 Reserves The Right To Reject Any Bid, To Waive Any Part Thereof, Waive Any Defect Contained Therein And Accept The Offer Most Advantageous To The Interest Of The Government. Joelle M. Benavidez Bac Chairman

Details: The Purpose Of This Synopsis Is To Provide Notice Of Naval Information Warfare Center (niwc) Atlantic's Intent To Award A Firm-fixed-price Purchase Order On A Noncompetitive Basis To Climax Portable For 1 Climax 105215 Flange Facer, Model Ff8200 Id Chuck Hyd Turning Arm C-weight Metal 1ea2 Hp 93724 Laptop, Model Hp1000 208-230v Controls Pendant C050 H050 1ea. The Government Intends To Negotiate Solely With Climax Portable Under The Authority Of Far 13.106-1(b). A Request For Information Was Posted To The Government Point Of Entry On 9/18/2024 Until 10/9/2024 For The Following Requirement For The Flange Facer And Hpu Of Armored Military Vehicles. Machine Performance Rangesid Mounting Range45 - 120 Inches (1143.0 - 3048.0 Mm)facing Diameter Range 45 - 120 Inches (1143.0 - 3048.0 Mm)milling Diameter Range 45 - 120 Inches (1143.0 - 3048.0 Mm)grinding Diameter Range 45 - 120 Inches (1143.0 - 3048.0 Mm)swing Diameter @ Minimum With Feedbox On End Of Arm84.7 Inches (2151.4 Mm)radial Tool Slide Travel 12 Inches (304.8 Mm)axial Tool Head Travel 4 Inches (101.6 Mm)depth Required Inside Bore For Id Chuck (± 0.25 Inches (± 6.4 Mm) Is Travel Of Leveling Foot)12.13 ± 0.25 Inches (308.1 ± 6.4 Mm)feed Rate 0.002 - 0.040 In/rev (0.051 - 1.016 Mm/rev)rotational Drive Systemdrive Type Hydraulic Drive Withpinion And Internal Ring Gearpinion Gear To Ring Gear Reduction 7.429:1single Point Turning Speed Range:2.8 - 14 Rpmmilling & Grinding Speed Ranges (with 150:1 Reducer):0.002 - 0.374 Rpmpower Input Requirements10 Gpm@1200 Psi 37.9 L/min @ 8273 Kpatesting Data - Flatness At 82 Inch (2083 Mm) Diameter: 0.0068 Inches (0.17 Mm)on A Dedicated Fixture Made Of A-36 Steel In A Controlled Environment With Single Point Machine, After Warm-up.tool Configurationssingle-point Machining Only1. Base Packagerotary Table, Tool Kit, Operator's Manual 2. Feed Assemblypneumatic Feed Assembly W/ Remote Air Control 3. Drive Motor Assemblyhydraulic Drive Assy W/ Feed Conditioning Unit - Does Not Include Motor(hydraulic Drive System Includes: Hyd Motormount, Hoses, Fittings, Rotary Union, Feed Trip Valve,cam, And Feed Pneumatic Conditioning Unit.)4. Hydraulic Motor For Rotary Table Drive (if Hydraulic Drive Isselected In Step 3). Rated At 10 Gpm, 1200 Psi18.7 Cu In (306.4 Cu Cm), 2.8 - 14 Rpm 5. Turning Arm Assemblyturning Arm Assembly With Single Point Tool Head 6. Counterweight Assemblycounterweight Assembly 7. Chuck Assemblyid Chuck Assembly 8. Shipping Containermetal Container For Id Mount Machinehydraulic Power Units For Single Pointinghorsepower 10 Hpgpm Flow / Hz 10 Gpm @ 60 Hz 8.36 Gpm @ 50 Hzspeedto Be Rated For 15gpm (56.7 L/min) Max Continuous Use, 20 Gpm (75.7 L/min) Max Intermittent Use. Intermittent Is Defined As 10% Of Each Minuteoperating Range-10°f ( –23°c) - 200°f (93°c)oil Temperature Range50°f (10°c) - 190°f (88°c)cordset/hose Length 50 Ft (15m)hydraulic Quick Disconnect Couplingsiso 16028control Functions System Start, E-stop, Jog, And Remote Speed Dial Controloperator Pendant Accessory Needed Functions:-remote Pendant-3 Axis Pendant Control-hydraulic Locking Feature-built-in System Relief Valve And System Pressure Gauge-osha Compliant-speed Control Allowing The Operator To Set Repeatable Speed Settings And Easily Make Small Speed Adjustments When Needed.-soft Start/stop Control Ensuring Smooth Starting And Stopping On Large Machines, Preventing Damage To The Drive And Feed.-controlled Deceleration Preventing Over-pressurization Of The Hydraulic System Allowing The Operator To Decelerate The Machine Tool In A Safe And Controlled Manner, Especially When The "emergency Stop" Is Used.-controlled Motion Of The Machine Tool Minimizing Sudden Speed Changes Preventing Rapid Acceleration When A Cutting On Uneven Surfaces-replaceable Cordset With Quick Connectors At Both Ends Of The Cable.-magnetic Back Allowing For Convenient Positioning Of The Pendant And Preventing Pendant From Falling.-ergonomic Pistol Grip For Ease Of Use.*laptop Is Custom Built For Oem And Cannot Be Bought From Hp Commercially. Must Purchase Through Climax To Ensure Form Fit Function With Machinery The Naics Code Is 333517and The Small Business Size Standard Is 500 Employees. This Notice Is Not A Request For Competitive Quotes; However, Any Responsible Source Believing That It Can Fulfill The Requirement May Submit A Capability Statement, Proposal, Or Quotation. Responses To The Pre-solicitation Notice Can Be Submitted Via The Navwar E-commerce Website At Navwar E-commerce Central (navy.mil) By 31 January 2025. Questions Concerning This Notice Should Be Directed To William Faulconer At William.a.faulconer.civ@us.navy.mil. All Responses Received By 31 January 2025 Will Be Considered By The Government For The Purpose Of Determining Whether To Conduct A Competitive Procurement. A Determination By The Government Not To Compete The Proposed Purchase Order Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government.

Description: Synopsis pr: Fd2030-25-00008 1. Estimated Issue Date And Estimated Closing/response Date: issue: 11 Feb 2025 closes: 13 Mar 2025 2. Rfp# Sprta1-25-r-0089 3. Service/spare/repair/oh: Spares 4. Amc: 3/c 5. Nomenclature/noun: Valve, Solenoid 6. Nsn: 4810-01-340-6457 7. Pn: 13c13602e01 8. History: 30 Aug 2024, 9 Each, Tactair Fluid Controls Inc (70236) 26 Feb 2024, 2 Each, Tactair Fluid Controls Inc (70236) 9. Description/function: 4.2" Lg X 4.7" Hi X 3.3" Wi, 3 Lb. Steel, Copper, Aluminum And Various. Controls Bleed Air Flow To Ram Air Ejector Which Acts As A Jetpump To Draw Ram Air Across Primary/secondary F16 Heat Exchanger. 10. Total Line Item Quantity: L/i 0001 83 Each (range: 21-125) 11. Application (engine Or Aircraft): F-16 12. Destination: L/i 0001 Ship To Sw3211 13. Required Delivery: L/i 0001 Ship To Sw3211, On Or Before 14 Apr 2027 14. Qualification Requirements: Do Not Exist. 15. Export Control Requirements: No 16. Uid: Note To Contractor: Uid Requirements Will Apply. 17. Qualified Sources: Tactair Fluid Controls Inc. (cage 70236) 18. Set-aside: This Acquisition Will Not Be Set Aside. 19. Mandatory Language: the Government Does Not Own The Data Or The Rights To The Data Needed To Manufacture This Item. Firms Interested In Participating In This Procurement Are Encouraged To Contact The Oem, To Inquire About The Data Or Rights To The Data. in Accordance With Far 5.207(c) (16) (i), All Responsible Sources May Submit A Bid, Proposal, Or Quotation Which Shall Be Considered By The Agency. foreign Owned Firms Are Advised To Contact The Contracting Officer Or Program Manager Before Submitting A Proposal To Determine Whether There Are Restrictions On Receiving An Award. it Is Suggested That Small Business Firms Or Others Interested In Subcontracting Opportunities In Connection With The Described Procurement Make Contract With The Firms(s) Listed. this Acquisition Involves Technology That Has A Military Or Space Application. The Extent Of Foreign Participation Has Not Yet Been Determined. Nothing In This Notice Contradicts Other Restrictions, Identified In The Synopsis Notice Or Solicitation, Regarding Eligible Sources (e.g., If This Is A Small Business Set Aside, Foreign Sources May Not Participate As Potential Prime Contractors But Could, If Otherwise Eligible, Participate As Subcontractors). based Upon Market Research, The Government Is Not Using The Policies Contained In Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify To The Contracting Officer Their Interest And Capability To Satisfy The Government's Requirement With A Commercial Item Within15 Days Of This Notice. government's Obligation Under This Contract Is Contingent Upon The Availability Of Appropriated Funds From Which Payment For Contract Purposes Can Be Made. No Legal Liability On The Part Of The Government For Any Payment May Arise Until Funds Are Made Available To The Contracting Officer For This Contract And Until The Contractor Receives Notice Of Such Availability, To Be Confirmed In Writing By The Contracting Officer electronic Procedures Will Be Used For This Solicitation. Hardcopies Of The Solicitation Will Not Be Sent From This Office. The Solicitation Will Be Available For Download Only At Www.sam.gov. authority: 10 U.s.c. 2304(c) (1), Justification: Supplies (or Services) Required Are Available From Only One Or A Limited Number Of Responsible Source(s) And No Other Type Of Supplies Or Services Will Satisfy Agency Requirements. The Proposed Contract Action Is For Supplies And Services For Which The Government Intends To Solicit And Negotiate With Only One, Or A Limited Number Of Sources Under The Authority Of Far 6.302. this Notice Of Intent Is Not A Request For Competition. However, All Proposals Received Within 45 Days (30 Days If Award Is Issued Under An Existing Basic Ordering Agreement) After Date Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. note: While Price Will Be A Significant Factor In The Evaluation Of Offers, The Final Contract Award Decision May Be Based Upon A Combination Of Price And Past Performance Factors As Detailed In The Solicitation. note: An Ombudsman Has Been Appointed To Hear Concerns From Offerors Or Potential Offerors During The Proposal Development Phase Of This Acquisition. The Purpose Of The Ombudsman Is Not To Diminish The Authority Of The Program Director Or Contracting Officer, But To Communicate Contractor Concerns, Issues, Disagreements And Recommendations To The Appropriate Government Personnel. When Requested, The Ombudsman Will Maintain Strict Confidentiality As To The Source Of The Concern. The Ombudsman Does Not Participate In The Evaluation Of Proposals Or In The Source Selection Process. Interested Parties Are Invited To Call The Ombudsman At (405) 855-3556. Do Not Call This Number For Solicitation Requests. request For Written Quotation Will Be Issued. Only Written Or Faxed Request Received Directly From The Requestors Are Acceptable. The Anticipated Award Date Will Be 90 Days After The Issuance Of This Notice. 20. Buyer Name And Email Address: Questions Concerning This Synopsis Or Subsequent Solicitation Can Be Directed To The Buyer Kristian Hollingshead At Kristian.hollingshead.1@us.af.mil.

Description: CATEGORY: Rear inner bearing Bolero , Rear outer bearing Bolero , Clutch plate Tata 1512 , Rear hub oil seal Bolero , Front hub inner bearing Bolero , Front hub outer bearing Bolero , Pressure plate with release Bearing Tata 1512 , Front hub oil seal Bolero , Rear shocker assy Tata Safari , Flasher unit 8 pin 12 volt Bolero , Brake Mcylinder Bolero , Rear main leaf Bolero , Centre bolt Bolero , U bolt Bolero , shackle pin leaf Bolero , Front brake caliper assy Bolero , Brake pipe rear l MGypsy , Speedometer cable assy MGypsy , Fuel pump motor Denso MGypsy , Fuel return vacuum valve MGypsy , Rear seat complete MGypsy Soft Top , Buffer pad LH RH SML Truck , Fuel filter 1 Ltr SML Truck , Steering bush SML Truck , Rear bearing Part No U 497 Tata sumo Gold , Axle seal Tata sumo Gold , Head light assy LS Tata sumo Gold , Exhaust brake pipe Tata 5Xton , Judgment rod Tata 5 xton , Steering gear box oil seal Tata 1212 TC , Front shock absorber LR Tata 5xton , Jumping rod bush kit force Ambulance , Engine oil filter New Holland Tractor , Hydraulic oil filter New Holland Tractor , Fuel filter set New Holland Tractor , Cabin rubber buffer pad Tata LPTA 715 , Helmet MCycle , Air filter Ashok Leyland , Front differential oil seal MandM scorpio , Air filter MandM scorpio , Oil filter MandM scorpio , Disc pad front MandM scorpio , Turbo charger Tata Sumo , Split bulb 24 Volts , Wheel stud with nut MandM scorpio S10 , Steering oil seal Scorpio10 , Throttle body MGypsy MPFI , Throttle body packing , Steering oil seal Tata 713 LPTA , Idle speed motor actuator MGypsy MPFI , TPS sensor MGypsy MPFI , Propeller shaft centre bearing Force Ambulance , Steering gear box oil seal Tata 715 LPT , Front hub with bearing Scorpio S10 , U J Cross MGypsy , Disc pad front Scorpio N , Oil seal front Tata 110 133 12 , Axle oil seal Tata 1212TC 4x4 , Check nut lock washer front Tata 1212 4x4 , Check nut lock washer rear Tata 1212 4x4 , Check nut Tata 1212 4X4 , Steering gear box oil seal Tata 1613 , Kit shoe hold down Tata sumo , Flasher unit 12 volts SML 3500 , Emery paper cloth type fine , Cold patch solution , Bulb 67 No 12 volt , Bulb 2441 24 volt , Bulb 67 No 24 Volt , Head light relay 12 volt , Flasher unit 24Volts Tata , Pull and push switch , Head light bulb 24 volt , U bolt washer , Bulb 1141 12 volt , Wheel cylinder rear Brake Scorpio S10 , Nut bolt TVS 10 12 14 16 18 20 22 No , Grease nipple big , Grease nipple small , Welding rod 10 SWG , Welding rod 08 SWG , Tube less puncher kit , Horn 12 volt Minda , Horn 24 volt Minda , M seal , Paint red , Rim paint , Brake adjuster kit Scorpio , Paint green , Ana bond , Red oxide primer , White paint , Paint black , Clamp small , Side mirror L R side Tata , Banjo bolt 19 Nos , Solution SR 505 , Steel screw 1 inch Chinese , Head light bulb 12 volt , Retro reflective tape yellow , Retro reflective tape red , Retro reflective tape white , Silicon tube , Flexible pipe rubber 19 No dia , Flexible pipe rubber 22 No dia , N C Thinner , Dash board polish , Fuse Small 10 15 20 25 , Alloy wheel Scorpio , Oil seal front SML 4X2 , Oil seal rear Tata Sumo , King pin Lower Tata 1212 4x4 , Oil seal front Tata 1613 , Oil seal rear Tata 1613 In out , Oil seal rear Tata 1212 In out , Spring washer 12 17 No , Fog light assy , Fog light bulb 12V , Fog light bulb 24V , T monogram , Araldite , Split pin various size , Banjo washer 12 14 17 Nos , Shocker assy Force Ambulance , UJ cross Scorpio

Details: Description Supply And Delivery Of Materials For The Rehabilitation/renovation Of Daycare/lactation Room Of Court Of Appeals Amp-014-25 (svp) Sir/madam: Please Quote Your Best Proposal For The Item/s Described Below Using The Price Quotation Form (see Annex "a"), Subject To Terms And Conditions Stated Herein. Lot No.: 1 Item Description: Supply And Delivery Of Materials For The Rehabilitation/renovation Of Daycare Center/lactation Room Of The Court Of Appeals Approved Budget For The Contract: ₱115,719.00 *the Abc Is Understood To Be The Ceiling Price; Offers Must Not Exceed The Abc Provided. The Quotation Duly Signed By You Or Your Duly Authorized Representative, Accompanied By Required Forms, Shall Be Submitted Not Later Than February 13, 2025; 11:00 Am At The Address Indicated Below: Atty. Joshua Felino Julian F. Dulce Secretariat, Bids And Awards Committee (bac) 3rd Floor, Centennial Building Court Of Appeals Ma. Orosa St., Ermita, Manila Bacsecretariat.ca@judiciary.gov.ph Only One (1) Set Of Documents Shall Be Required. To Protect The Integrity Of The Quotation, Bidders Are Encouraged To Submit Their Documents In A Sealed Envelope Or In A Compressed Archived Password-protected Envelope In Case Of Electronic Submission. The Sealed Envelope Shall Contain The Name Of The Contract To Be Bid In Capital Letters And Bear The Name And Address Of The Supplier In Capital Letters. The Price Quotation Form (annex “a”) Shall Be Submitted On Or Before The Deadline For Submission And Receipt Of Quotation, Either Manually At The Office Of Bac Secretariat, Ground Floor, Annex Vi Building, Court Of Appeals, Ermita, Manila Or Electronically To Bacsecretariat.ca@judiciary.gov.ph. The Eligibility Requirements May Be Submitted Together With The Price Quotation Form, Or Not Later Than Two (2) Days From Receipt Of Notice From The Bac Secretariat Requiring The Submission Thereof. In Case Of Modification, It Must Be Done Before The Deadline For The Submission And Receipt Of Quotations And Labelled As A “modification”. The Time Stamped Or Indicated In The Latest Proposal Received Shall Be The Official Time Of Submission. The Bac Shall Assume No Responsibility For The Misplacement Of The Contents Of The Improperly Sealed Or Marked Bid, Or Submission Of Corrupted Files, Or For Its Premature Opening. Late Submission Of Quotations Shall Not Be Accepted And Considered. Atty. Arnel D. Macapagal Assistant Clerk Of Court Chairperson, Bids And Awards Committee Requirements/instructions No. Eligibility Requirements Instruction 1 Price Quotation Form (annex “a”) Must Indicate The Unit And Total Price. Must Indicate The Required Information. Must Be Duly Signed By The Authorized Representative. 2 Mayor’s Permit For The Year 2025 Must Be Valid For The Year 2025. A Recently Expired Mayor’s Permit Together With The Official Receipt As Proof That The Prospective Bidder Has Applied For Renewal Within The Period Prescribed By The Concerned Local Government Unit Shall Be Accepted. 3 Philgeps Registration Number Submit Proof Of Registration (picture Or Screenshot Of Philgeps Registration On The Website) 4 Omnibus Sworn Statement (oss) (annex “b”) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Special Power Of Attorney In Case Of Sole Proprietorship; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Ensure That There Are Eleven (11) Declarations. Indicate Required Information. Attach Competent Evidence Of Identification (valid Government-issued Id. The Use Of Cedula Is Not Acceptable). Must Be Duly Notarized And Signed. 5 Statement Of Compliance With The Must Be Duly Signed And Dated Technical Specifications By The Authorized Representative. Terms And Conditions: 1. Bidders Shall Provide Correct And Accurate Information Required In This Form. 2. Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By You Or Any Of Your Duly Authorized Representative/s. 3. Price Quotations/s Must Be Valid For A Period Of Forty-five (45) Calendar Days From The Deadline Of Submission. 4. Quotations Exceeding The Abc Or Submitted Beyond The Deadline Shall Be Rejected. 5. Price Quotation/s — To Be Denominated In Philippine Peso — Shall Include All Taxes, Duties, And/or Applicable Discounts, If Any. 6. Award Of Contract Shall Be Made To The Lowest Quotation Which Complies With The Technical Specifications, Requirements And Other Terms And Conditions Stated Herein. 7. In Case Two Or More Bidders Are Determined To Have Submitted The Lowest Calculated And Responsive Quotation, The Court Of Appeals Shall Adopt And Employ “draw Lots” As The Tiebreaking Method To Finally Determine The Winning Bidder In Accordance With Gppb Circular No. 06-2005. 8. The Item/s Shall Be Delivered According To The Accepted Offer Of The Bidder. 9. The Court Of Appeals May Cancel Or Terminate The Contract At Any Time Under Any Of The Grounds Provided Under Ra No. 9184 And Its 2016 Revised Irr. 10. The Rfq, Purchase Order (contract), And Other Related Documents To The Above Stated Procurement Project Shall Be Deemed To Form Part Of The Contract. 11. The Notice Of Award, Letter Order, And Notice To Proceed Are Deemed Received As Of The Date Of Their Transmittal To The Winning Bidder’s Official Email Address. Hence, The Relevant Periods Under Ra No. 9184 And Its Irr, And The Rfq Shall Commence From Receipt Thereof. 12. Liquidated Damages Equivalent To One-tenth Of One Percent (0.1%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. The Court Of Appeals May Terminate The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. 13. Payment Shall Be Made After Delivery And Only Upon The Submission Of The Required Supporting Documents, I.e. Delivery Receipt And Sales Invoice Or Official Receipt, By The Supplier, Contractor, Or Consultant Within Thirty (30) Calendar Days. In Case Of Accounts Maintained In Banks Other Than Landbank Of The Philippines, Bank Transfer Fees Shall Be Chargeable Against The Creditor’s Account. 14. For Payment Purposes, The Awarded Service Provider, Supplier, Or Consultant Is Required To Submit A Certified Copy Of Its Tax Clearance Certificate And Bir Certificate Of Registration Or Bir Form 2303 In Accordance With Relevant Revenue Regulations. Annex "a" Price Quotation Form Date: _____________ The Chairperson, Bids And Awards Committee Court Of Appeals Ma. Orosa St., Ermita, Manila Sir: Having Examined The Request For Quotation No. Amp-014-25 (svp) The Receipt Of Which Is Hereby Duly Acknowledged, The Undersigned Offers The “supply And Delivery Of Materials For Rehabilitation/renovation Of Daycare Center/lactation Room Of The Court Of Appeals”, In Conformity With The Said Request For Quotation For The Sums Stated Hereunder: Lot No. Item Description Qty Unit Price Total Price 1 Colored Plain Sheet, 4’ X 8’ Gauge 22 (green) 5 Pcs. Marine Plywood, ¼” X 4’ X 8’ 5 Pcs. Angle Bar 2” X 2” X ¼” X 20ft 4 Pcs. Spray Bottle (2 Liters) 1 Pc. Wood Treatment / Preservative 8 Qtrs. Adhesive Sealant 2 Qtrs. Welding Rod 6013 Special, 2.5 5 Kls Semi-gloss Latex, White 5 Tins Flat Latex 2 Tins Roof Guard, Baguio Green 3 Tins Quick Drying Enamel, White 2 Gal. Acry-color, Latex, Thalo Blue 2 Qtrs. Acry-color, Latex, Thalo Green 2 Qtrs. Roller Brush #7” 3 Pcs. Baby Roller, Cotton 3 Pcs. Sanding Paper # 120 10 Pcs. Sanding Paper # 220 10pcs. Paint Brush #1½”, White Hair 4 Pcs. Camiseta Rug, White 5 Kls. Flatwall Enamel 2 Gals. Ppr Pipe, ½” 2 Pcs. Ppr Elbow 3 Pcs. Ppr Female Coupling, ½” 1 Pc. Pvc Elbow, 2” (orange) 2 Pcs. Ball Valve, ½” 1 Pc. Tee Reducer, ¾” X ½” 1 Pc. Pvc Elbow 45 Degrees X 2” 2 Pcs. Pvc Y, 2” (orange) 1 Pc. Pvc Cement (solvent 400 Cc) 1 Can One Piece Toilet Bowl W/ Complete Fittings 2 Sets Bidet 2 Sets Lavatory Sink W/ Complete Fittings 2 Sets Dual Angle Valve, ½” X ½” 2 Pcs Angle Valve, ½” X ½” 1 Pc Total Price In Figures: Total Price In Words: ____________________________________________________________________________ _________________________ Signature Over Printed Name _________________________ Position/designation _________________________ Office Telephone/mobile Nos. _________________________ Email Address Statement Of Compliance With The Technical Specifications After Having Carefully Read And Accepted The Above-mentioned Instructions And Terms And Conditions, I/we Submit Our Quotations For The Items/s As Follows: Technical Specifications Must Comply With The Following Minimum Requirements: Supply And Delivery Of Materials For Rehabilitation/renovation Of Daycare Center/lactation Room Of The Court Of Appeals I. Approved Budget For The Contract: The Approved Budget For The Contract Is One Hundred Fifteen Thousand Seven Hundred Nineteen Pesos (php115,719.00) Inclusive Of All Applicable Taxes And Charges. Ii. Requirements: The Supplier Shall Supply And Deliver The Following Requirements; Item No. Item Description Qty 1 Colored Plain Sheet, 4’ X 8’ Gauge 22 (green) 5 Pcs. Marine Plywood, ¼” X 4’ X 8’ 5 Pcs. Angle Bar 2” X 2” X ¼” X 20ft 4 Pcs. Spray Bottle (2 Liters) 1 Pc. Wood Treatment / Preservative 8 Qtrs. Adhesive Sealant 2 Qtrs. Welding Rod 6013 Special, 2.5 5 Kls Semi-gloss Latex, White 5 Tins Flat Latex 2 Tins Roof Guard, Baguio Green 3 Tins Quick Drying Enamel, White 2 Gal. Acry-color, Latex, Thalo Blue 2 Qtrs. Acry-color, Latex, Thalo Green 2 Qtrs. Roller Brush #7” 3 Pcs. Baby Roller, Cotton 3 Pcs. Sanding Paper # 120 10 Pcs. Sanding Paper # 220 10pcs. Paint Brush #1½”, White Hair 4 Pcs. Camiseta Rug, White 5 Kls. Flatwall Enamel 2 Gals. Ppr Pipe, ½” 2 Pcs. Ppr Elbow 3 Pcs. Ppr Female Coupling, ½” 1 Pc. Pvc Elbow, 2” (orange) 2 Pcs. Ball Valve, ½” 1 Pc. Tee Reducer, ¾” X ½” 1 Pc. Pvc Elbow 45 Degrees X 2” 2 Pcs. Pvc Y, 2” (orange) 1 Pc. Pvc Cement (solvent 400 Cc) 1 Can One Piece Toilet Bowl W/ Complete Fittings 2 Sets Bidet 2 Sets Lavatory Sink W/ Complete Fittings 2 Sets Dual Angle Valve, ½” X ½” 2 Pcs Angle Valve, ½” X ½” 1 Pc Iii. Terms Of Payment: Payment Shall Be Made After Delivery And Only Upon The Submission Of The Required Supporting Documents, I.e. Delivery Receipt And Sales Invoice Or Official Receipt, By The Supplier, Contractor, Or Consultant Within Thirty (30) Calendar Days. In Case Of Accounts Maintained In Banks Other Than Landbank Of The Philippines, Bank Transfer Fees Shall Be Chargeable Against The Creditor’s Account. Payment Details: Banking Institution: ________________________________________________ Account Number: __________________________________________________ Account Name (should Be The Exact Account Name As Registered In The Bank): ________________________________________________________________ Bank Branch: _____________________________________________________ Iv. Delivery Address: Court Of Appeals, Ma. Orosa St., Ermita, Manila V. Delivery Requirements: The Items Must Be Delivered Within Fifteen (15) Calendar Days Upon Receipt Of Purchase Order. By Affixing My Signature Below, I Am Confirming Our Compliance With The Technical Specifications/terms Of Reference Stated Above. I Further Certify That Such Compliance Is True And Correct; Otherwise, If Found To Be False Either During The Bid Evaluation Or Post-qualification, The Same Shall Give Rise To Automatic Disqualification Of Our Bid. We Undertake, If Our Quotation Is Accepted, To Perform The Services/deliver The Goods In Accordance With The Schedule Of Requirements And Technical Specifications. We Further Undertake To Submit Our Bir Certificate Of Registration (form 2303) And Tax Clearance Certificate Prior To Final Settlement Of Our Contract, And We Understand That Non-submission Thereof Shall Constitute Sufficient Ground For The Court Of Appeals To Hold The Payment For Any Goods Delivered Or Services Rendered By Our Company. Until A Formal Contract Is Prepared And Executed, This Quotation, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Or Any Quotation You May Receive. Date Company Name Authorized Representative Name/signature Address Official Contact Number ________________________ Email Address Annex “b” Omnibus Sworn Statement (revised) Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity; 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code; 11. [name Of Bidder] Hereby Assigns The Following Contact Number/s And E-mail Address/es As The Official Telephone/fax Number And Contact Reference Of The Company Where The Ps Bac And Ps Notices May Be Transmitted. Telephone No/s.: ________________________________ Fax No/s.: ________________________________ E-mail Add/s.: ________________________________ Mobile No.: ________________________________ It Is Understood That Notices/s Transmitted In Any Of The Above-stated Telephone/fax Numbers And/or E-mail Address/es Are Deemed Received As Of Its Transmittal And The Reckoning Period For The Reglementary Periods Stated In The Bidding Documents And The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 Shall Commence From Receipt Thereof. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Known To Me, And Known To Be The Same Person/s In The Exhibited [insert Type Of Government Identification Card Used*], With His/her Photograph And Signature Appearing Thereon, With No.________________________ Issued On ______________________ At ____________________. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission ___________ Notary Public For ______ Until _______ Roll Of Attorney's No. _____________ Ptr No. _______ [date Issued], [place Issued] Ibp No. _______ [date Issued], [place Issued] Doc. No. ______ Page No. ______ Book No. _____ Series Of _____.