Valve Tenders

Details: Revised Bid Document for Augmentation of water Supply Scheme Bomb Block Dera Baba Nanak, Distt. Gurdaspur, Under Head PIDB.) Supplying and laying of uPVC pipes, valves and specials for Distribution System, Dismantling and restoration of Interlocking Road, Providing & Installing Water connection, Enviornments complete in all respects.

Details: .Providing and laying 100mm dia DI Water Supply line and making connections of existing water supply line and providing and fixing CID Joints and Sluice Valves in Sec-26 Commercial Belt Bhiwani and all other works contingent thereto. A/c Rs.1,99,322/-

Details: Description Supply And Delivery Of Electrical And Plumbing Materials For The Use Of The General Services Office For The Maintenance Of Pgin Building And Facilities 1 2 Pcs Impeller 2 10 Rolls Teflon Tape 1/2 3 10 Rolls Teflon Tape 3/4 4 2 Pcs Faucet 5 2 Pcs Lavatory Faucet 6 2 Pcs Extended Mono Faucet 7 2 Pcs Water Filter Cartridge 8 2 Pcs Check Valve (hd)1" 9 1 Can Vulca Seal (1 Ltr) 10 1 Can Solvent Cement 400cc 11 1 Set Marine Epoxy (1/2 Ltr) 12 2 Pcs Ball Valve 1/2 13 2 Pcs Chemical Hose Breided, 3/4", 50m 14 7 Pcs Orange Pipe, 1/2 15 12 Pcs Elbow Blue, 1/2 16 6 Pcs Orange Short Elbow 1/2 17 15 Pcs Junction Box With Cover 18 20 Pcs Pvc Connector, 1/2 19 30 Pcs Metal Clamp, 1/2 20 5 Pcs Amco Box 21 5 Pcs Plate 3-gang With Co 22 100 Pcs Screw 1 1/2 23 10 Pcs Receptacle 4" 24 7 Pcs Street Lamp 25 8 Pcs Led Bulb 25w 26 7 Pcs Surface Switch 27 2 Pcs Nema 3r, 2 Pole 28 2 Pairs Circuit Breaker, 20 Amp, Bolt-on 29 20 Set Flourescent Lamp, 18w,led 30 1 Pack Tox With Screw 31 2 Gals Latex Paint X-x-x-x-x

Details: Description 1.) 1 Pc. - Sleeve Type Coupling For 8"ø Steel Pipe, Stainless Steel Tension Bolts, Nuts And Plain Washer 2.) 4 Pcs. - 8"ø Steel Ring Flange 3.) 1 Pc. - 8"ø Butterfly Valve Wheel Type 4.) 2 Pcs. - 12" Steel Ring Flange 5.) 1 Pc. - 12" Sleeve Type Coupling For Steel Pipe, Stainless Steel Tension Bolts Nuts & Plain Washer 6.) 46 Pcs. - 16mm X 150mm Stainless Tension Bolts Nuts And Washer 7.) 1 Pc. -12" Check Valve W/ Counter Weight 8.) 5 Boxes - Welding Rod 6011 (20kg/box) Instructions/ Notes To Bidders: 1. Please Indicate The Following Information In Your Bid: A) Company Name, Address, Tel/fax Nos.; B)philgeps Registration Certificate No. And Date Of Validity; C) Bidder’s Offer ( Technical Specification/brand) Per Item; D) Unit & Total Price; E) Name Of Bidder’s Authorized Representative; And F) Signature And Date. 2. Bids/ Quotations May Be Submitted Thru Fax, Email, Or Directly To The Bac Secretariat Office On Or Before The Deadline Of Submission Of Bids. 3. Suppliers Are Required To Submit The Following Prior To The Notification By The Bac Of The Award: A) Valid And Current Mayor’s/ Business Permit (2024); B) Valid And Current Philgeps Registration Certificate/ Number; And C) *omnibus Sworn Statement (*to Be Submitted After The Award). 4.) Bids Should Be Valid For 45 Days Counted From The Deadline Of Submission. 5.) Warranty Shall Be For A Period Of Six (6) Months For Supplies & Materials, One (1) Year For Equipment From Date Of Acceptance By The Procuring Entity. 6.) Delivery Period: 30 Calendar Days. 7.) Term Of Payment: 30 Calendar Days. 8.) The Total Price Quoted Above Is Subject To Withholding Tax.

Details: Description The Barangay Local Government Unit Of San Miguel, Arakan, Cotabato Is Inviting Interested Suppliers To Submit Price Quotations For The Following Works: Lot/ Item Number Description Quantity Unit 1 Water Meter 90 Pcs 2 Gate Valve # 1/2 90 Pcs 3 Nipple 1/2 X 4 90 Pcs 4 Nipple 1/2 X 6 90 Pcs 5 Check Valve 1/2 90 Pcs 6 P.e. Male Adaptor, 1/2 90 Pcs 7 G.i. Coupling, 1/2 90 Pcs 8 P.e. Female Adaptor, 1/2 90 Pcs This Supply & Delivery Of Materials For Installation Of Water Meters, San Miguel, Arakan, Cotabato Has An Approved Budget For The Contract (abc) Of Two Hundred Thirty-two Thousand, Two Hundred Pesos (php 232,200.00) Only: Canvass Forms Can Be Obtained From Bac Secretariat, Barangay San Miguel, Arakan, Cotabato Starting January 3, 2025. The Deadline For Submission Of Sealed Canvass Is On January 14, 2025 At 12:00 P.m. Interested Parties Should Submit Their Sealed Canvass To The Bac Chairman, Bids And Awards Committee, Blgu – San Miguel, Arakan, Cotabato. All Contractors Are Required To Submit Business Permit & Philgeps. The Barangay Bids And Awards Committee Of Blgu- San Miguel, Arakan, Cotabato Reserves The Right To Reject Any Or All Canvasses, To Declare The Canvass A Failure, Or Waive Any Information Or To Award Such Canvass To The Supplier Whose Price Quotation Is Considered Most Advantageous To The Government. For Further Information, Please Refer To: Ms. Ronamae R. Canoy Bac Secretariat Blgu – San Miguel, Arakan, Cotabato Cel. No. 09502247161 Sanmiguelarakan2025.blgu.gov.ph@gmail.com (sgd.) Lolita R. Ruben Bac Chairman

Details: Description 32 Unit Power Sprayer 1. 4-5 Hp Gasoline Engine 2. Pressure: 175 Psi Max 3. With Pressure Relief Valve And Pressure Gauge 4. With Stainless Boom And Adjustable Nozzle 5. Cut Off Valve, Gun Type With Stainless Boom And Adjustable Nozzle 6. Discharge Hose: Pressurized, (250 Psi Max) 8.5 Mm (inside Diameter Or Compatible To The Pump), 100m Length 7. Suction Hose: 25mm Diameter With Stainless End Fittings' Other Requirements: A. Valid Amtec Test Report B. Valid Permit To Operate Issued By Bafe And Certificate Of Namdac Accreditation Issued By Pcaf; Certificate Of Conformity Of The Engine C. Certificate Of Company Owned/affiliated/authorized Service Ceter Within The Region And Service Center Must Have A Permit To Operate Issued By Bafe D. Notarized Affidavit Of Undertaking After Sales Service That Supplier Must Render Within 72 Hours Upon Receipt Of Notice From The Recipients/procuring Entity E. Certificate Of Availability Spare Parts Of The Brand/model Being Offered Within The Region To Be Issued By The Distributor/manufacturer/company Owned/affiliated/authorized Service Center F. Notarized Certificate Of Stock Allocation To Be Submitted During Bid Opening Issued By The Distributor/importer Specifying The Name Of Project To Da Rfo 1 G. Certificate To Conduct On-site Technical Briefing For Operators On Operation, Maintenance, And/or Repair Of The Supplied Goods By The Supplier H. With Metal Plate Bearing The Name, Address And Contact Number Of Supplier (embossed/engraved) I. With Spray Painted Da Logo (6" X 6"), Labelled With "rfo1-amia" Below The Da Logo J. With Heavy Duty Polyethylene Tarpaulin (trapal) Enough To Cover The Delivered Items K. 1 Unit Delivered Shall Be Subjected To Acceptance Testing

Details: Description 60 Piece Led Bulb, 12 Watts 20 Piece Ceiling Receptacle, 2x2 5 Piece Extension Wire, 3 Gang, 7m 60 Piece Moulding Electrical Wire Pipe, 3/4", 2.5m 30 Piece Surface Type Utility Box 30 Piece Plate, 2 Gang, Wide 20 Piece Switch, Wide Series 40 Piece Universal Outlet, Wide Series 2 Roll Flexible Hose, 3/4", 50m 2 Box Thhn Wire #12, 75m 100 Piece Electrical Nail, 3/4" 20 Piece Electrical Tape 14 Piece Circuit Breaker, Plug-in (15,20,30,60amp) 10 Pack Multipurpose Grab Adhesive, 100g 1 Piece Ladder, 5 Steps 30 Piece Teflon Tape 5 Piece Ppr Male Adapter, 1/2" 5 Piece Ppr Female Adapter, 1/2" 20 Piece Ppr Coupling, 1/2" 5 Piece Ppr Gate Valve, 1/2" 5 Piece Ppr Ball Valve, 1/2" 20 Piece Ppr Tee, 1/2" 5 Can Ppr Pipe Cement, 200cc 25 Piece Ppr Pipe, 1/2", 4.5m 5 Piece Ppr Threaded Plug, 1/2" 5 Piece Ppr Cap, 1/2" 3 Piece Pressure Gauge, 0-100psi 3 Piece Pressure Switch 1 Piece Goulds Impeller, 2k61 1 Piece Goulds Guide Vane, 3k67 3 Piece Mechanical Water Seal, 5/8" 2 Piece 6203 Double Sealed Ball Bearing 2 Piece 161-193 Mfd 110v Starting Capacitor 4 Piece Leather Cup, 2"

Details: Notice Of Sources Sought. requesting: 1. Written Notification By Qualified And Interested Vendors 2. Market Research Quote For The Services Requested In The Attached Statement Of Work ***please See Attachment For Full Statement Of Work**** statement Of Work replacement Chillers, Hq0448516562 for The Defense Finance And Accounting Service Events (rome, New York) 1.0. Purpose: The Purpose Of This Contract Is To Replace Three (3) Existing Air-cooled, Rtaa Packaged Chiller Units With New Hermetic Rotary Refrigeration Machines To Provide Chilled Water Cooling To Meet The Comfort Cooling Needs Of The Facility. The Work To Be Performed Under This Contract And In Accordance With This Statement Of Work (sow) Shall Consist Of Furnishing, All Necessary Plant, Labor, Tools, Transportation, Supplies, Supervision, Equipment, Materials, And Incidentals Necessary For Providing All Work Shown In This Sow, And All Applicable Codes, Regulations, Standards, Meet Ashrae 90.1-2001 Efficiency Guidelines, And Criteria In Effect At The Date Of Solicitation. 2.0 Scope: The John S. Mccain National Defense Authorization Act (ndaa) Section 889 Applies To All Components Of This Requirement. The Contractor Shall Provide Labor, Service, Supervision, Personnel, Parts, Tools, Materials, Equipment, Installation, Programming, Hardware, Software, Licensing, And Other Items And Services As Needed For The Completion Of Av Support. The Contractor Shall Provide Project Management Of The Services Identified In This Pws. The Contractor Shall Provide Travel Expenses For All Contractor Personnel. 3.0 General Requirements: The Contractor Shall Provide All Necessary Personnel, Equipment, Supplies, Transportation, Tools, Materials, Supervision, And Other Non-personal Services For Comprehensive Removal, Replacement Of Three (3) Rtaa Chillers At The Defense Finance And Accounting Service (dfas) Rome, New York As Detailed In This Statement Of Work (sow) 3.1 Chiller #1. 130 Tons: Remove Existing Model: Rttaa 1304 Yt01 A3c0 B. Serial #: U99j01971., Outdoor Air-cooled Chiller, With Freeze Protection, And Provide, New, For Comfort Cooling, 130 Tons., Rtaa Hermetic Rotary Compressor Refrigeration Air Cooled Chiller, High Efficiency With Applicable Low Ambient Operation, Freeze Protection, System Control Integration To The Existing Building Automation System Communication Interface (bas), And New 20amp, 120v Duplex Weathertight Outlet. New Exterior Chilled Water Piping (supply & Return) As Well As New Line Gauges, Vibration Eliminator, Vent, Thermometer, Water Strainer, Gate Valve, Valve Pressure Gage, New Insulation With Aluminum Shielding And Proper Piping Supports. Existing Chiller Concrete Pad Dimensions Are Approximate: 103” W X 286” L. Contractor Shall Verify All Rtaa Specifications And Dimensions. 3.2 Chiller #2. 90 Tons: Remove Existing Model: Rtaa 0904 Yt01 A3d0 Bf. Serial #: U99j01996., Outdoor Air-cooled Chiller, With Freeze Protection, And Provide New, For Comfort Cooling, 90 Tons., Rtaa Hermetic Rotary Compressor Refrigeration Air Cooled Chiller, High Efficiency With Applicable Low Ambient Operation, Freeze Protection, System Control Integration To The Existing Building Automation System Communication Interface (bas), And New 20amp, 120v Duplex Weathertight Outlet. New Exterior Chilled Water Piping (supply & Return) As Well As New Line Gauges, Vibration Eliminator, Vent, Thermometer, Water Strainer, Gate Valve, Valve Pressure Gage, New Insulation With Aluminum Shielding And Proper Piping Supports. Existing Chiller Concrete Pad Dimensions Are Approximate: 100” W X 216” L. Contractor Shall Verify All Rtaa Specifications And Dimensions. 3.3 Chiller #5. 80 Tons: Remove Existing Model: Rtaa 0804 Yt01 A3c0 B., Serial #: U07m06563., Outdoor Air-cooled Chiller, With Freeze Protection, And Provide New, For Comfort Cooling, 80 Tons., Rtaa Hermetic Rotary Compressor Refrigeration Air Cooled Chiller, High Efficiency With Applicable Low Ambient Operation, Freeze Protection, System Control Integration To The Existing Building Automation System Communication Interface (bas), And New 20amp, 120v Duplex Weathertight Outlet. New Exterior Chilled Water Piping (supply & Return) As Well As New Line Gauges, Vibration Eliminator, Vent, Thermometer, Water Strainer, Gate Valve, Valve Pressure Gage, New Insulation With Aluminum Shielding And Proper Piping Supports. Existing Chiller Concrete Pad Dimensions Are Approximate: 108” W X 240” L. Contractor Shall Verify All Rtaa Specifications And Dimensions. 3.4 Description Of Services: Contractor Shall Remove Existing Intellipak Air-cooled Units, Located On The Exterior Of Building 1. Contractor Will Coordinate With Dfas Cor For Required System Down Time. Chilled Water Systems Are Glycol Treated, Contractor Is Responsible For Drained, Reclaimed And Reintroduced Into The System. Glycol Must Be Tested (glycol Percentage Based On Its Refractive Index) Upon Removal And Documented For Owner Review; Reintroduced System Glycol Will Be At The Same Recorded/tested Level. All Systems Will Be Left In Working Condition Without Leaks. Remove Existing Supply And Return Exterior Chilled Water Piping Up To And Including The Isolation Valves. Remove, Retain, And Re-install System Control Integration To The Existing Building Automation System (bas) Tracer Es., Control Wiring And Materials For Communication From The Chiller To The Bas Monitoring Office. Contractor Shall Update Tracer Es With New Chiller Unit Image, Data, Graphics, And Set Points. Install New From Factory New Rtaa 80, 90, And 130 Ton, Air Cooled Chiller With Correct Voltage Design For The Building. Provide Necessary Electrical Wiring, Conduit, Connections, And Materials Resulting In A Durable And Reliable Power Supply To The New Units. New Chillers Will Be Equipped With Vibration/noise Dampening Features And Be Placed On Current Contract Pads Per Manufactures Specifications. Provide And Install New Exterior Chilled Water Supply/return Lines. For Each Unit, Provide And Install Two New Isolation Valves (butterfly Valves). Provide And Install Two New ¾ Inch Ball Valve Equipped Test/bleed Ports, One In Supply And One In Return. Provide And Install One New Y Strainer In New Supply Line. Install New Piping Support Brackets For Supply And Return Lines; Install New Piping Insulation With Aluminum Exterior Shielding, Insulation Will Be Applied To Isolation Valve, Test Ports, And Y Strainer As Well. Exterior Of Supply And Return Chilled Water piping Will Be Marked With Industry Standard Uv/weather Resistant Markings To Identify “chilled Water Supply” And “chilled Water Return” a.) Contractor Shall Be Responsible For On-site Coordination Of All Staging And Deliveries Of Their Product, To Include Access To And Operation Of Any Equipment Need For Unloading And Movement Of Materials Or Product. b.) Start Up, Training, And Manuals: The Contractor Shall Provide, Schedule, And Arrange For Factory Certified Start-up. Contractor Will Provide Operational, And Maintenance Training As Recommended By The Manufacture, To Train Government Technicians And Provide All Operating, Maintenance, And Parts Manuals Instructions To Include Parts Listing Of Equipment And Other Materials Installed. c.) The Contractor Shall Conduct A Minimum Two (2) Hours Training For On-site Staff Upon Installation Of The Equipment To The End-user At The Government Site. d.) The Contractor Shall Provide Documentation Of Unit Start-up Commissioning And All Recorded Readings. 4.0 Qualifications: The Work For This Project Shall Be Executed In The Best And Most Workmanlike Manner, By Qualified, Trained And Certified Efficient Mechanics/tradesmen, Skilled In Their Respective Trades. Only Certified Journeymen In Each Respective Trade, Or Apprentices Under The Direct Supervision Of Certified Journeymen, Shall Be Permitted To Install And/or Supervise Installation For This Project. Individual Trade Work For This Project Shall Be Performed And Quality Maintained By The Applicable Trade Only. The Contractor Shall Assure That All Trades Coordinate Their Work With That Of Other Trades. The Contractor Shall Coordinate And Perform All Operations In A Manner That Will Result In A Professional And Expeditiously Completed Project. The Work Shall Be In Strict Accordance With Prevailing Industry Standards And Manufacturer’s Instructions. Work And Materials Shall Comply With This Sow And The Editions In Effect At The Time Of This Solicitation For All Applicable Criteria, Regulations, Guidelines, And Codes, All Of Which Are Made A Part Thereof. 5.0 Disposal Of Materials And Cleanup: The Contractor Shall Clean Up After Each Work Period And Dispose Of All Debris At The Close Of Each Day. The Contractor Shall Protect All Structures, Utilities, Vegetation, Sidewalks And Vehicles From Damage At All Times. The Contractor Shall Replace All Damaged Materials With New Materials To The Satisfaction Of The Government, At No Additional Cost To The Government. Removal/disposal Of Obsolete Chiller Unit; The Contractor Will Take Custody Of The Removed Chiller, Piping, And Isolation Valves To Include Any Oil, R-22 Refrigerant And Any Equipment And Materials From The Demolition. Removed Oil And Refrigerant Will Be Disposed Of At A Waste Or Recycle Location Adhering To Epa, Federal, State, City, County And Local Codes By The Contractor. 6.0 Place Of Performance: Defense Finance And Accounting Service-rome, 325 Brooks Rd, Rome, New York, 13441., Bldg 1. 7.0 Period Of Performance: Installation, Set Up, And Start-up Commissioning Of The New Chiller Unit; Removal And Proper Disposal Of The Obsolete Chiller Unit; And Training Of The End User Shall Be Completed Within One Hundred And Forty-nine (149) Days Upon The Award Of Contract. 8.0 Normal Hours Of Operation: Work Hours Shall Be Monday Through Friday 0800- 1600 Hours, Except For Us Federal Holidays. The Contractor Shall Have Prior Writing Approval From The Cor To Work Outside Of These Guidelines To Coordinate With The Site Installation Law Enforcement Personnel. 8.1 Installation Access: All Contractors Arriving At The Installation Access Point Shall Be Preannounced And Be Cleared Prior To Accessing The Installation. A Map And Directions To The Installation Will Be Provided By The Cor. The Contractors Shall Preregister Their Arrival At The Following Website: Defense Biometric Identification, Dbids Https://dbids- Global-enroll.dmdc.mil/preenrollui/#/landing-page. Upon Arrival, The Cor Will Meet Contractor Personnel At The Vehicle Control Center (vcc). Preregistered Contracting Personnel Will Enter The Vcc. Contractor Personnel Shall Bring Their Preregister Letter Or Qrc Scan Code And Valid Photo Identification For Badging. After Badging Has Been Completed, Contractor Vehicles Will Be Searched, And Badges Will Be Scanned Prior To Entry On The Installation. Each Time When Processing Onto The Installation, All Contractor Vehicles Shall Be Searched, And All Badges Shall Be Scanned By Installation Security Forces. 8.2 Visitor Adjudication Matrix: Contractor Personnel Containing Any Of The Following Offenses Shall Not Be Permitted Access To The Installation.

Details: Description 73 Bags Portland Cement 4 Cu.m. Fine Sand 8 Cu.m. Gravel 73 Bags Water Proofing Compound 50 Pcs 12mmѳ Deformed Bar 42 Pcs 10mmѳ Deformed Bar 8 Kgs Tie Wire Ga16 23 Pcs M. Plywood 1/4"x4x8 400 Bd.ft. 2"x2" Form Lumber 11 Kgs Cwn, Assorted Sizes 1 Roll Collapsable Tent, 6ft Width 2 Pcs Gi Pipe 4"ѳ X 0.60m, Sch.40 2 Pcs Gi Pipe 4"ѳ X 0.30m,sch.40 4 Pcs Gi Elbow 4", Heavy Duty 3 Pcs Gi Pipe 4"ѳ X 0.20m, Sch.40 1 Pc End Cap 4"ѳ, Heavy Duty 1 Set Control Box & It's Accessories 2 Pcs Pipe Wrench 36 Inches, Hd 1 Set Marine Epoxy, A & B 2 Pcs Pe Male Adaptor 3/4"ø 1 Pc Brass Ball Valve 3/4"ø 1 Pc Brass Ball Valve 1/2"ø 10 Pcs Gi Tee 3/4"ѳ 1 Roll Sdr 11 3/4 Hdpe Pipes 2 Pcs Pe Coupler Reducer 3/4x1/2 5 Pcs Hacksaw Blade 1 Pc Saddle Clamp 2"фx3/4"ф 2 Pcs Gi Nipple 3/4"фx4" 2 Pcs Gi Nipple 3/4"фx10" 2 Pcs Gi Bushing Reducer 3/4x1/2 2 Pcs Pe Male Adaptor 1/2

Details: Description 15 Unit Angle Valve (2 Way, 1/2 X 1/2) 328.13 5 Unit Bidet For All Crs 742.00 5 Unit Float Ball #1 1,465.28 5 Unit Float Ball #1/2 808.50 5 Unit Float Ball #3/4 1,202.25 10 Piece Float Switch 516.08 15 Unit Flush Toilet Water Tank Push Button 1,707.82 15 Unit Gate Valve # 1 1,065.75 10 Unit Lavatory Bottle Trap (stainless) 661.50 15 Unit Multi Faucet 310.80 20 Piece Ordinary Faucet, Plastic 152.77 10 Piece Ppr Caupling (#1) 28.35 10 Piece Ppr Caupling (#1/2) 12.07 10 Piece Ppr Elbow 45° (#1) 39.90 10 Piece Ppr Elbow Female Adopter (#1) 398.65 10 Piece Ppr Elbow Female Adopter (#1/2) 131.25 10 Piece Ppr Elbow Female Adopter (#3/4) 191.45 10 Piece Ppr Elbow Male Adopter (#1) 481.60 10 Piece Pressure Gauge 191.63 10 Piece Pressure Switch 1,160.78 7 Piece Safety Glasses, Anti-fog, Clear Lens 600.00 15 Piece Tape Lone (#1/2) 25.90 20 Piece Tape Lone (#3/4) 40.95 20 Piece Urinal Push Out 645.75 15 Set Water Meter Set 3,625.00 4 Set Water Pump (jet Pump) 1hp 220v In/out 1'' 7,500.00 4 Piece Water Pump Pressure Switch 1,600.00