Valve Tenders

Valve Tenders

Southern Railway - SR Tender

Goods
Machinery and Tools
Ireps
India
Details: Description :flash Back Arrestor (dry Type) For Torch End Of Acetylene/lpg Lines To Prevent Flash Backs In Oxy F uel System Conforming To En 730/iso 5175-1/is 11006 Standards With Flame Arrestor (fa) And Non Return Valve (nrv) Working Pressure: 1.5 Bar For Acetylene/5.0 Bar For Lpg. End Connections G 3/8" Lh To En 560/iso 3253 St andards. Make: Messer (cg-91 Fuel) Or Esab (fr-18) Or Gce (fr-20t Fuel) Or Weldstar Or Witt Only. Note:1) Of fers Of Oems Or Their Authorized Dealers Enclosing Valid Authorized Dealership Certificate Only Will Be Considered . 2) The Suppliers Shall Send Test Certificate From Govt. Authorized Test House. In Case Of International Brand, The test Certificate From Reputed Institute Like Bam, Germany Is Mandatory. 3) The Suppliers Should Have Equipmen ts For Testing Of Flash Back Arrestors And Calibration. (product Catalogue To Be Attached During Quote For Referen ce) [ Warranty Period: 12 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ]
Closing Date5 Feb 2025
Tender AmountINR 500 K (USD 5.7 K)
This is an estimated amount, exact amount may vary.

BARANGAY CALUMPIT LOBO, BATANGAS Tender

Civil And Construction...+2Construction Material, Machinery and Tools
Corrigendum : Closing Date Modified
Philippines
Details: Description Concreting Works: A. Materials Cost Cement Sand Gravel 3/4" Crushed Sahara Cement D.b. 12mm X 6.0m D.b. 10mm X 6.0m G.i. Wire #16 Formworks & Scaffolding: Cocolumber 2" X 2" X 12' Cocolumber 2" X 2" X 10' Cocolumber 2" X 2" X 8' Plywood 1/4" X 4' X 8' (ordinary) C.w. Nails (assorted) G.i. Elbow 1 1/2" G.i. Nipple 1 1/4" X 12" G.i. Pipe 1 1/2" X 1" G.i. Gate Valve 1 1/2" G.i. End Cap 1 1/2" Teplon Tape P.e. Pipe 1" X 150.0m (sdr-11) P.e. Pipe 3/4" X 150.0m (sdr-ii) P.e. Pipe Coupling 1" P.e. Coupling 3/4" X 150.0m (sdr-ii) P.e. Reducer 1" To 3/4" X 150.0 (sdr-ii)
Closing Date14 Jan 2025
Tender AmountPHP 430 K (USD 7.3 K)

MINDANAO STATE UNIVERSITY MAGUINDANAO Tender

Machinery and Tools
Philippines
Details: Description Item No. Description Qty Unit 1 16 Mm Drip Tape Barb Tee Joint 100 Cp 2 16 Mm Drip Tape Elbow 100 Pc 3 16 Mm End Cap 200 Pc 4 16 Mm Union Coupling 100 Pc 5 Drill Bit 10 Mm 6 Pc 6 Drill Bit 8 Mm 6 Pc 7 Drill Bit 9 Mm 6 Pc 8 Drip Off Take Valve For 16mm Drip Hose Tape 300 Pc 9 Drip Rubber Ring/gasket 16 Mm 200 Pc 10 Drip Tape (1000 M Per Roll) 4 Roll 11 Dripper (500 Pcs Per Pack) 4 Pack 12 Filter 1in 4 Pc 13 Pe Coupling 1in 40 Pc 14 Pe End Cap 1 In 20 Pc 15 Pe Water Hose 1in 20 Roll 16 Teflon Tape 40 Pc 17 Water Pump Set (water Pump,inlet Hose, And Outlet Hose) 2 Set 18 Water Tank 2000 L (with 1 In Adapter) 4 Pc
Closing Date20 Jan 2025
Tender AmountPHP 641.3 K (USD 10.9 K)

BACUAG WATER DISTRICT Tender

Machinery and Tools
Corrigendum : Tender Amount Updated
Philippines
Details: Description 1. Brass Ball Valve 1/2 Dia With Lockwing - 275 Pcs 2. Gi Coupling Std Sch 40 1/2 Dia - 260 Pcs 3. Gi Elbow Std Sch 40 1/2 Dia X 90 - 200 Pcs 4. Gi Straight Elbow Std 40 1/2 Dia X 90 - 270 Pcs 5. Teflon Tape 1/2 X .075mm X 10m - 500 Pcs 6. Gi Nipple Std Sch 40 1/2 X 4 - 275 Pcs 7. Gi Nipple Std Sch 40 1/2 X 2 - 275 Pcs 8. Gi Nipple Stand Pipe Std Sch 40 1/2 Dia X 12 - 150 Pcs 9. Gi Tee 1/2 Std Sch 40 - 250 Pcs 10. Brass Faucet 1/2 Plainbib - 260 Pcs 11. Male Thread Adaptor 1/2 Dia Coupling - 300 Pcs 12. G.i Plug 1/2 Dia Sch. 40 - 50 Pcs 13. Pe Coupling 1/2 Dia (compression) - 50 Pcs
Closing Date14 Jan 2025
Tender AmountPHP 170.5 K (USD 2.9 K)

Northern Coalfields Limited - NCL Tender

Goods
Machinery and Tools...+1Automobiles and Auto Parts
GEM
India
Details: CATEGORY: CAGE BLOCK, PART NO. 20592D420 , BOLT FITTED, PART NO. 92404013 , PULLEY 79 MM ROPE, PART NO. 68502E2782 , OIL SEAL, PART NO. 95604016 , VALVE, SOLENOID, PART NO. 96329304 , DUMP LINK ASSEMBLY, PART NO. MP200725 , CLEVIS, DRAG HITCH, WELDED, PART NO. MP215714 , FUSE, PART NO. 1557882 , FUSE, PART NO. 1557872 , SURGE SUPPRESSORS, PART NO. 12687211 , BRUSH HOLDER, PART NO. 62038537 , BRUSH HOLDER WITH SPRING, PART NO. 62026122 , BRUSH HOLDER, PART NO. 62024712 , BLOWER MOTOR, PART NO. 62029133 , FUSE, PART NO. 1557854 , BLOWER HOUSING, PART NO. 62009504 , CONTACTOR, PART NO. 1557856 , SPRING CLIP, PART NO. 62003498 , BRUSH HOLDER STUD-RH, PART NO. 15038805 , BRUSH HOLDER STUD-LH, PART NO. 15038806 , BATTERY, PART NO. 1557903 , BHLDR SPRING, PART NO. 15038810 , BRUSH HOLDER STUD INSULATOR, PART NO. 62010841 , BRUSH HOLDER SPRING-7, PART NO. 62023744 , BHLDR SPRING 7.5, PART NO. 62030080 , WEDGE, SOCKET, PART NO. B00088702
Closing Date30 Jan 2025
Tender AmountINR 7.9 Million (USD 92.5 K)

VETERANS AFFAIRS, DEPARTMENT OF USA Tender

Solid Waste Management...+1Chemical Products
United States
Description: This Is A Sources Sought Announcement Only. It Is Neither A Solicitation Announcement Nor A Request For Proposals Or Quotes And Does Not Obligate The Government To Award A Contract. Responses To This Source Sought Notice Must Be In Writing. The Purpose Of This Sources Sought Announcement Is For Market Research To Make Appropriate Acquisition Decisions And To Gain Knowledge Of Potential Businesses Interested And Capable Of Providing The Services Described Below. the Va San Diego Requires The Purchase And Installation Of A Waster Purification System. The Va San Diego Is 3350 La Jolla Village Dr San Diego, Ca 92161 And Is The Expected Place Of Delivery. The Prospective Contractor Must Be Brand Name Or Equal Parts To Specifications Provided In The Salient Characteristic Document. items And Description: healthcare Ro4 Assembly, Aami⮠St108 Compliant System. supplied With 185-gallon Storage Tank, W/30 Gpm Distribution Pump, Alarm Panel, Uv Assembly, Endotoxin Filter Assembly. kit, Di Divert-to-drain, 3-valve Bypass Res, ¾ Header, 2-tank Polish System 1" Blend Valve Assembly installation, Commissioning, & Training decommission & Removal Of The Existing Ro Water System If You Are Interested And Are Capable Of Providing The Required Service(s) Please Provide The Following Information. (1) Company Name, Address, Point Of Contact (2) Size Status And Representations Of Your Business, Such As But Not Limited To: Service Disabled Veteran Owned Small Business (sdvosb), Veteran Owned Small Business (vosb), Hubzone, Woman Owned Small Business (wosb), Large Business, Etc. (3) Is Your Company Considered Small Under The Naics Code 333310? (4) Does Your Company Have An Fss Contract With Gsa Or The Nac Or Are You A Contract Holder With Any Other Federal Contract? If So, Please Provide The Contract Type And Number. (5) If You Are An Fss Gsa/nac Or Other Federal Contract Holder, Are The Referenced Items/solutions Available On Your Schedule/contract? (6) Please Provide General Pricing For Your Products/solutions For Market Research Purposes. (7) Please Submit A Capability Statement That Addresses Qualifications And Verifies Ability To Perform Work Described Above. the Government Is Not Obligated To Nor Will It Pay For Or Reimburse Any Costs Associated With Responding To This Sources Sought Announcement. This Notice Shall Not Be Construed As A Commitment By The Government To Issue A Solicitation Or Ultimately Award A Contract, Nor Does It Restrict The Government To A Particular Acquisition Approach. The Government Will In No Way Be Bound To This Information If Any Solicitation Is Issued. The Va Is Mandated By Public Law 109-461 To Consider A Total Set-aside For Service Disabled Veteran Owned Small Businesses. However, If There Are Insufficient Service Disabled Veteran Owned Small Business Responses, An Alternate Set-aside Or Full And Open Competition May Be Determined. No Sub-contracting Opportunity Is Anticipated. The North American Classification System (naics) Code For This Acquisition Is 333310 ($1,000 Employees). responses To This Notice Shall Be Submitted Via Email To Ismael.vicente@va.gov . Telephone Responses Will Not Be Accepted. Responses Must Be Received No Later Than 01/31/2025 16:00 Pst. items Being Offered Must Be In Compliance With The Buy American Act. after Review Of The Responses To This Sources Sought Announcement, A Solicitation May Be Published On The Beta.sam.gov Or Gsa Ebuy Websites. Responses To This Sources Sought Announcement Will Not Be Considered Adequate Responses To The Solicitation. All Interested Offerors Must Respond To The Solicitation In Addition To Responding To This Sources Sought Announcement. Prospective Bidders Must Be Authorized Re-sellers In Order To Participate In The Solicitation Process. notice To Potential Offerors: All Offerors Who Provide Goods Or Services To The United States Federal Government Must Be Registered In The System For Award Management (sam) At Www.sam.gov. Additionally, All Service Disabled Veteran Owned Small Businesses Or Veteran Owned Small Businesses Must Be Registered With The Department Of Veterans Affairs Center For Veteran the Buy American Act Applies To This Procurement ;(baa) (41 U.s.c. §⧠8301 8305) Is The Primary Law Addressing Domestic Content Preferences In Federal Procurement. It Provides A Preference For The Purchase Of Domestic Supplies (or Domestic End Products) And Domestic Construction Materials. The Implementing Regulations For The Baa In The Federal Acquisition Regulation (far) Provide A Two-part Test For Determining If An End Product (that Does Not Consist Wholly Or Predominantly Of Iron Or Steel Or A Combination Of Both) Qualifies As A Domestic End Product: (i) The End Product Must Be Manufactured In The U.s.; And (ii) Effective October 25, 2022 More Than 60 Percent Of The Cost Of Its Components Must Be Mined, Produced, Or Manufactured In The U.s.1 The Domestic Content Threshold Increased To 60 Percent On October 25, 2022, Further Increases To 65 Percent In Calendar Year 2024, And 75 Percent In Calendar Year 2029. In The Event No Domestic Products Can Meet The New Thresholds Or The Cost To Acquire Them Would Be Unreasonable, There Is A 55 Percent Fallback Threshold In Effect From October 25, 2022 Through December 31, 2029. For End Products Consisting Wholly Or Predominantly Of Iron Or Steel Or A Combination Of Both, The Cost Of Domestic Components Must Be 95 Percent To Qualify As A Domestic End Product. 2 The Far Provides Similar Standards For Domestic Construction Materials.
Closing Date31 Jan 2025
Tender AmountRefer Documents 

Eastern Railway - ER Tender

Works
Machinery and Tools...+2Electrical Goods and Equipments, Electrical and Electronics
Ireps
India
Details: Description:- Supply Of Energy Efficient Bore Well Submersible Pump-motor Set Of Pump Discharge capacity Approx. 1.00 Lps ( Approx. 850 Gph ) And Discharge Head 54 Mtrs. ( Approx. 177 Feet ) complete With Water Cooled And Water Lubricated Copper Wire Wound Squirrel Cage Induction Motor suitable For 1 Phase, 240 Volt, 50 Hz Power Supply System With Stainless Steel Coupling And All Other accessories Such As Suitable Length 3 Core Flat Copper Conductor Cable Of Size 1.5 Sq.mm, 1100 Volt grade ( Motor To Starter Panel ), Total 30 Mtrs. Length 40 Mm. Dia Heavy Gauge Gi Column Pipe, One non-return Valve, Two Pairs Erection Clamps Etc. Alongwith One Control Panel Consisting With Mcb, single Phase Dol Starter, Voltmeter, Ammeter, Water Level Indicator, Led Indications Etc.including installation, Testing And Commissioning. ( Make Of Pump-motor Set - Ksb / Texmo / Cri / Kirloskar / crompton / Calama ) ( Make Of Gi Column Pipe - Tata / Jindal / Bansal ) ( Make Of Copper Conductor cable - Anchor / Kdk / Havells / Finolex / Gloster / Kei / Polycab / Rr Kabel )
Closing Date24 Jan 2025
Tender AmountINR 2.4 Million (USD 28.7 K)

Rizal Medical Center Tender

Machinery and Tools
Philippines
Details: Description Mechanical Supplies - Coil Cleaner - Condensate Pump For Aircon (10m High Head) - Refrigerant 32 10 Kg - Welding Torch With Igniter - Pressure Gauge For Ref Aircon / 410a - Gauge Hose (2 Meters Long) - Rugs - Torch Gas (mapgas) 14.1oz Biomedical Supplies - Incandescent Bulb (100 Watts), Branded - Spiral Tubing For Bp Apparatus (standard Size) Length: 3.25m Outer Diameter: 7.3mm Inner Diameter: 4.0mm - Laryngoscope Bulb Standard Thread Size Led Illumination (2.5 V) - Latex Inflation Bag, 22 Cm, To 34 Cm Single Tubing (for Bp Apparatus - Latex Inflation Bag, 22 Cm To 34 Cm, Double Tubing (for Bp Apparatus) - Bp Cuff, Clothes Cloth, With Velcro, Adult Size (22 Cm To 34 Cm Upper Arm Size) - Rubber Valve With Bulb (for Bp Apparatus) - Male And Female Connector (for Bp Apparatus Universal) Motorpool Supplies - Car Battery, 12v 3sm, Maintenance Free - Car Battery, 12v 1sm, Maintenance Free - Tire, 195/50/r16 84v, 2024 Manufacturing Date
Closing Date13 Jan 2025
Tender AmountPHP 447.8 K (USD 7.6 K)

Balayan Water District Tender

Electrical Goods and Equipments...+2Machinery and Tools, Electrical and Electronics
Philippines
Details: Description Please Quote Your Lowest Price On The Item(s) Listed Below And Submit Your Quotation Through This Email Address: Bac.balayanwaterdistrict@gmail.com, Duly Signed By Your Representative Not Later Than 1:00pm Of February 10, 2025, Or In A Sealed Envelope To The Bids And Awards Committee (bac) Of Balayan Water District With A Mailing Address Listed Below, And Will Be Opened/evaluated On The Same Day At 2:00pm. Submersible Cable For 25 Hp Submersible Motor Double Jacketed 3w (no.1) - 50 Lm Manual Transfer Switch 300 Amperes 3ph - 1 Set Riser Pipe 4" X 10' Length, High Grade W/ Heavy Duty Coupling - 10 Pcs Sleeve Type Coupling With Harness Set 4" - 1 Pc Flow Meter 4" W/ Complete Accessories- 1 Set Check Valve- 1 Pc Mechanical Tee 4" Ci Fj Bng- 1 Pc Gi Elbow 4" X 45' High Grade- 2 Pcs H.d.p.e. Tubing, Sdr 13.5,50 Meters /roll, 100mm Dia. (4")- 1 Roll Mechanical Tee 4 × 4 - 1 Pc
Closing Date10 Feb 2025
Tender AmountPHP 393.8 K (USD 6.7 K)

Public Health Engineering Department - PHED Tender

Goods
Hiring of Vehicles
Eprocure
India
Details: 2 No. Providing potable water supply to shortage inaccessible various zones in the Jurisdiction of PHE SUB Division Handwara/Ramhall through 2 No. of Water Tankers/Tippers mounted with Water Tank of capacity of minimum 8000Ltr to 10000 Ltr mounted with motor to fill the tanker (The POL suction pipe, delivery pipe, Gate valves incl, fuel, lubricants maintenance is to be arranged by the firm/contractor himself etc the ODO meter shall be functional with GPS tracker complete Job F.Y 2024-25.
Closing Date20 Jan 2025
Tender AmountINR 600 K (USD 6.9 K)
7171-7180 of 7886 archived Tenders