Valve Tenders

Description: CATEGORY: WATER FINDING PASTE AQUADIS 100GMbyTIN , OIL PASTE OLEODIS , GI CHAIN 5MM , SEAL WIRE GALVANISED THK 4MM , ROPE SAMPLING COTTON 20MX5MM , SPLY 3by4inch CS SMLS PIPE API 5L , SPLY 1inch CS SMLS PIPE API 5L G , SPLY 2inch CS SMLS PIPE API 5L G , Supply 0.75inch SORF flange 150class , Supply of 1inch SORF flange 150class , Supply of 2inch SORF flange 150class , Supply of 24inch SORF flange 150class , 1inch WNRF flange 150class Sch. 80 , 2inch WNRF flange 150class Sch. 40 , 24inch WNRF flange 150class Sch.STD , 0.75inch BLRF flange 150class , 1inch BLRF flange 150class , 2inch BLRF flange 150class , 24inch BLRF flange 150class , 2inch 90 Deg. elbow Sch. 80 SML , 10inch 90 Deg.elbow WPBW Sch.40 , 12inch 90 Deg. elbow WPBW STD. , Wrap coating 4 mm Thick , Safety Harnes System , Barbed wire , Hot dipped galvanized concert. , 50x6mm GI Flat. , SS Hand railing , MS Grill , MS Chequared plate , Galvalume sheeting. , GSKT SPW 50MM class150 316 GRF , GSKT SPW 80MM class150 304 GRF , GSKT SPW 100MM class150 304 GRF , GSKT SPW 150MM class150 316L GRF , GSKT SPW 200MM class150 304 GRF , GSKT SPW 250MM class150 316 GRF , GSKT SPW 300MM class150 304 GRF , GSKT SPW 600MM class150 304 GRF , GSKT FLAT ASB 1.6X1.5MT , STUD WbyNUT A193 B16 5by8IN , STUD WbyNUT A193 B16 3by4IN , COTTON WASTE , LEAD SEAL SQUARE , SUPPLY OF STRUCTURAL STEEL , FLEXIBLE BRAIDED CU 20X3MM , 1by2x3inch STUD WITH 2 NUTS , 1by2x3.5inch STUD WITH 2 NUTS , 5by8x3.5inch STUD WITH 2 NUTS , 5by8x4inch STUD WITH 2 NUTS , 5by8x7inch STUD WITH 2 NUTS , 5by8x8inch STUD WITH 2 NUTS , 3by4x4inch STUD WITH 2 NUTS , 3by4x4.5inch STUD WITH 2 NUTS , 3by4x5inch STUD WITH 2 NUTS , 7by8x120MM STUD WITH 2 NUTS , 7by8x140MM STUD WITH 2 NUTS , 7by8x6inch STUD WITH 2 NUTS , 1inchx155 MM LONG STUD WITH 2 NUT , AUDCO VALVE SEALENT , PAD LOCKS , 2inch 3 inch REDUCERS , 3inch 4inch REDUCERS , ANCHOR FASTNER 12X25 , SHELLAC , TEFLON TAPE , MS SOCKET 1by2inch , NIPPLE 1by2X9 , NIPPLE 1by2X3 , NIPPLE 1by2X6 , PAINT REMOVER , WEDGE ANCHOR 10X100 , THERMOMETER 4X12inch STAMP 12 OD , THERMOMETER 4X120X12 STAMP , THERMOMETER BC 21by2X120X4

Details: Rfq Type Goods Goods Recreational Equipment Reference Number Gg12500491 Title Recreation Supply Description 13 Each X Handball - Balls 7 Each X Boxing Gloves Specification* Deliver At Koornhoop Street Westridge Mitchell's Plain Contact Person Fezile Mjiba Contact Number 021 444 3524 Email Fezile.mjiba@capetown.gov.za Specifications "the Bladders Made Of Plastic Must Be A Fully Equivalent Substitute For A Leather Casing Or Rubber Bladder In Every Respect Must - Have A High Tensile And Breaking Strength (approximately 95kg/cm2 - Be Soft And Supple To The Touch - Have Fault-free And Resistant Grains And Seams Which Exclude All Risk Of Injury And Do Not Fray Or Split. - The Ball Shall Consist Of At Least 32 Panels. - Fully Synthetic Sewing Threads Shall Be Used. - The Bladders Are Made Of Latex Or A Similar, Equivalent Material With A Stretching Capacity Of At Least 600%. - The Valve System Of The Bladder Must Be Simple And Effective To Use." E Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" * Deliver At Koornhoop Street Westridge Mitchell's Plain Contact Person Fezile Mjiba Contact Number 021 444 3524 Email Fezile.mjiba@capetown.gov.za Specifications "the Bladders Made Of Plastic Must Be A Fully Equivalent Substitute For A Leather Casing Or Rubber Bladder In Every Respect Must - Have A High Tensile And Breaking Strength (approximately 95kg/cm2 - Be Soft And Supple To The Touch - Have Fault-free And Resistant Grains And Seams Which Exclude All Risk Of Injury And Do Not Fray Or Split. - The Ball Shall Consist Of At Least 32 Panels. - Fully Synthetic Sewing Threads Shall Be Used. - The Bladders Are Made Of Latex Or A Similar, Equivalent Material With A Stretching Capacity Of At Least 600%. - The Valve System Of The Bladder Must Be Simple And Effective To Use." E Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" Delivery Date2025/04/30 Delivery Tocs - Amenities And Recreation Cses Delivery Address0 Koornhoop Street, Westridge Mitchell's Plain Contact Personfezile Mjiba Telephone Number0214443524 Cell Number Closing Date2025/01/30 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgg1.quotations@capetown.gov.za Buyer Detailss.manuel Buyer Phone0214009231 Attachments No Attachments Note On 1 August 2018 The City Of Cape Town Went Live With E-procurement Which Was Piloted With 3 Commodities Clothing, Building Hardware And Is&t. No Manual Submissions Will Be Accepted For These Commodities And Suppliers Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Description 1.the Local Government Unit Of The Municipality Of Magsaysay, Through The Local Government Support Fund- Financial Assistance (lgsf-fa) To Local Government Units Under The Fy 2023 General Appropriations Act Or Republic Act (ra) No. 11936 Intends To Apply The Sum Of Five Million Pesos Only (p 5,000,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Purchase Of Vehicle – 1 Unit Disaster Equipment/ Vehicle For Disaster Response And Rescue Activities – Fire Truck (2nd Call) In Barangay Poblacion, Magsaysay, Occidental Mindoro With Contract Identification Number Of Itb-2024-044. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2.the Local Government Unit Of The Municipality Of Magsaysay Now Invites Bids For The Purchase Of Vehicle – 1-unit Disaster Equipment/ Vehicle For Disaster Response And Rescue Activities – Fire Truck: Brand New 2000 Liters Stainless Steel P.t.o. Fire Truck 6-wheeler Unit Equipped W/ Side P.t.o. Driven Rear Mounted 1000 L.p.m. Fire Pump Unit Specifications: *engine: Japan Made Blue Power Diesel Engine With Manual Transmission (euro 4) - Engine Capacity: 2,999cc With Four Cylinder Diesel Engine *chassis: Brand New 6-wheeler Chassis With Large Carrier Type *differential: 5 Stud Heavy Duty 6-wheeler Heavy Duty Large Carrier Differential *water Tank: 2,000 Liters Water Capacity Oval Shape Imported Stainless Steel Water Tank - Water Level Indicator: Manual Type Water Level Indicator With Special Plastic Tubing With Aluminum Frame With Fittings *fire Pump: 1000 Liters Per Min (l.p.m.) Side Power Take Off Driven European Made ( Euro Standard )fire Pump -manufactured With High Quality Light Alloy Aluminum -single Stage Bronze Blower -complying With En (european) Iso 9001:2015 Certification -thermal Expulsion System (to Avoid Overheating) And Mechanical Stuffing Impermeability -self-priming With Automatic Suction System -vacuum Pump Made Of Etial 171 Aluminum Alloy -bronze (rg5 Gin 1705) Bearing Material -manually Controlled Electromagnetic Clutch For Vacuum Engaging -automatic Relieve System By Danfoss Pressure Transmitter -discharge Capacity Of 1000 Lpm - Gauges: 2023 Modern Design Pressure And Compound Gauges With Lcd Monitor System *power Take Off: Brand New Single Output Euro Grade Side P.t.o. (power Take Off) -p.t.o. Rpm Increaser: Equipped With Brand New Euro Grade 1/2.8 Rpm Increaser -european Made P.t.o. (class A) Side P.t.o. With R.p.m. Increaser -complying With En (european) Iso 14001:2015 Certification *equipped With Brand New Original Euro Grade Class A Power Take Off (p.t.o.) Drive Shafts *pump Connection: Stainless Steel Piping System -discharge Valve: 2 Sets Brand New Class A European-grade 2½” Anodized Aluminum Discharge Outlet Valves -suction Inlet: 1 Set Brand New Brass Suction Inlet -tank To Pump Valve: 1 Set Brand New 3” Japan-grade Tank To Pump Ball Valve *body (superstructure): Custom Fire Truck Superstructure “ Fire Tanker Style Body” -roll Up: 1 Set Imported Euro-grade Aluminum Roller Shutter § Designed For Pump Protection And Equipment Storage § Anodized Coating And High Quality Aluminum § Pipe-type Spring Locking For Opening And Closing The Roller Shutter § Specially Designed Aluminum Tumblers With Locking System § Plastic Cording For Water And Dust Proofing -crew Bench: Brand New Semi Open Type Compartment With Roof With Seating For 4 Men § Lined With High Quality Aluminum Checkered Plate Panels § Installed With Cushion For Seats With Plastic Protection -air Conditioning: Brand New Aircon Assembly For Front Cab Included -access Stairs: 2 Sets Custom Made Stainless Steel Access Stairs At The Middle Portion *fire Turret: Brand New Adjustable Nozzle Heart Shape Japan Grade Imported Fire Turret -made Out Of Bronze Bc6 (c83600), Which Is Ideal For Corrosive Environment -cast Ball Joints Fitted With Stainless Steel Ball Bearings And Lubricated With A Grease Mouth -stainless Steel Levers And Pvc Handles -2.5" Outlet Diamater With Angel Of Rotation At 85° Elevation Angle And 40° Depression Angle -capable Of 360° Rotation Adjustable Movement And 1 Types Of Water Output (adjustable) *painting: Imported Hipic High Quality Poly Urethane Paint “fire Red” Color *manufacturer And Supplier Iso Standard Minimum Requirement: -local Company Bidder And Supplier Manufacturer Must Have Iso 9001:2015 For Quality Management Standard For Supply, Delivery And Manufacture Of Fire And Rescue Vehicles. -local Registered Company Bidder And Supplier Must Be Registered In Trading, Sales And Supply Business For Fire Trucks For At Least Minimum Of 15 Years Or More To Assure Top Quality Experience & Training In Service And Maintenance With Specialized Equipments In The Industry. Delivery Of The Goods Is Required Within One Hundred Twenty (120) Calendar Days. Bidders Should Have Completed, Within 10 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3.bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184. 4.interested Bidders May Obtain Further Information From Local Government Unit Of The Municipality Of Magsaysay And Inspect The Bidding Documents At The Address Given Below During Office Hours (8:00 Am To 5:00 Pm). 5.a Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 16, 2024 – January 06, 2025 From Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only (p 5,000.00) Only. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented In Person. 6.the Local Government Unit Of Magsaysay Will Hold A Pre-bid Conference On December 23, 2024 (10:00 Am) At The Office Of The Bids And Awards Committee, 2nd Floor, Municipal Building, Jp Laurel Street, Poblacion, Magsaysay, Occidental Mindoro Which Shall Be Open To Prospective Bidders. 7.bids Must Be Duly Received By The Bac Secretariat On Or January 06, 2025 (09:30 Am) Through Manual Submission At The Office Address As Indicated Below. Late Bids Shall Not Be Accepted. 8.all Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9.bid Opening Shall Be On January 06, 2025 (10:00 Am) At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10.the Local Government Unit Of The Municipality Of Magsaysay Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.

Details: Description 1 1 Lot Aircon Maintenance For Pag-ibig Fund Tacloban Branch And Tacloban Housing, Legal Officer And Coa Rviii For The Y2025: Quarterly Maintenance Tacloban Branch *three (3) Unit-3 Tonner Acu's Pn:116-071-20-062, Pn:116-071-20-063 And Pn:116-071-22-139 *four (4) Units- Wall Mounted Acu's Obh-sn70130068, Admin:sn70130068, Ms-11:sn70120067 And Ossco-poea-pn: 116-071-16-003 *two (2) Units- Wall Mlounted Acu's Borongan Mso - Sn540l031800538270130293 Borongan Mso - Sn540k814590538270130114 Tacloban Housing, Legal Officer And Coa Rviii *six (6) Units-2.5hp, Ceiling Mounted Services: A. General Cleaning Once Every Quarter To Include The Following: - Condenser And Evaporator Coils - Air Handling Blower And Condensing Units - Inner And Outer Casing/enclosure To Remove Stains -check System Leaks, -check Field Wiring, -check Unit For Electrical Service Line Expansion Valve (package Type), Thermostat Control Switches, -lubrication Of All Moving Parts And Bearing, -check Up Operating Pressure B. Free Labor For Every Replacement Of Parts But Said Parts Should Be Procured By Hdmf. C. Trouble Shooting Of Units That Are Not Functioning Properly Within 24hrs From Request. - Must Submit Updated Legal Documents/documentary Requirements (if Expired) For Y2025 Based On The Attached Annex A (nos 1 To 4) *abc = Php210,000.00 X-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x

Details: Description 6 Pcs. Butterfly Valve 4" (100mm) Mechanical Type With Hand Lever Resilient Seated With Epdm Set Cast Iron Body With Double Sided Profile Stainless Steel Shaft Made Of 316 Materials With Multiple Bearing & Shaft Retainer Stainless Steel Sealing Made Of 316 Materials Mirror Polished & Low Torque German Technology 10 Pcs. Coupling 4" (100mm) Black Iron Type Schedule 80 Npt Threaded Interested Suppliers Must Submit The Following Certified True Copy Of Eligibility Requirements: 1. Formal Quotation With Approval Of Sales Manager & President Of Company. 2. Submit Certified True Copy Of The Following Documents: 2.1 Latest Bir Tax Registration Certificate 2.2 Latest Bir Income Tax Return With Proof Of Remittance/payment. 2.3 Latest Bir Tax Clearance Certificate W/ Proof Of Payment. 2.4 Mayors Permit For Cy 2025 With Proof Of Payment. 2.5 Updated Dti / Sec Registration Certificate. 2.6 Updated Philgeps Certificate With Platinum Membership 2.7 Duly Sign & Notarized Omnibus Sworn Statement 2.8 Duly Sign & Notarized Certificate Of Authority For The Representative Of Company. 2.9 Latest Certificate Of Dealership/distributorship For Suppliers 3.0 Brochure / Images Of The Above Items Stating Specifications. Terms & Conditions: 1.) Deadline For Submission Of Quotations And Supporting Documents On January 8, 2024 @ 10:00 Am Cut-off Time Via Electronic Mail And Express Mail Only. 2.) Delivery Period/term – Within 3 Days From Date Of Purchase Order 3.) Delivery Term - Inclusive Of Delivery Charge And Handling, Fob Alcala, Pang. 4.) Price Quoted Are Subject To Deduction Of 5% Vat & 6% Ewt (for Goods) 5.) Goods To Be Supply Is Subject To Inspection/acceptance, Awd Reserves The Right To Cancel, Reject Or Rebid The Items Which Do Not Conform With The Specifications. 6.) Incomplete / Invalid Eligibility Requirements Including Incomplete Specifications And Information Shall Be A Grounds For Technical Disqualification / Rejection Of Quotation. 7.) All Bids/quotations In Excess Of The Abc Will Be Rejected.

Details: Description I. Direct Cost A. Material Cost A.1 Supply And Installation Of Overhead Water Tank 1 Set/s Stainless Cylindrical Water Tank @ /set (horizontal Type), 2500l Capacity Bestank Or Approved Equal 2 Pc/s Gi Pipe, 1-1/2" Dia. S-40 @ /pc 6 Pc/s Angle Bar, 1-1/2 X 1-1/2 X 1/4 @ /pc 6 Kg/s E6013 Welding Rod, Wipweld @ /kg 5 Pc/s Hacksaw Blade @ /pc 4 Pc/s Cutting Disc, 4" Dia. @ /pc 3 Pc/s Grinding Disc, 4" Dia. @ /pc 1 Gal Metal Primer, Red Oxide @ /gal 4 Bottles Paint Thinner @ /bottle 39 Meter/s Pe Pipe. 3/4, Sdr (moldex) @ /meter 18 Meter/s Pe Pipe, 1" Dia. (moldex) @ /meter 2 Pc/s Gate Valve, 3/4, Hd @ /pc 3 Pc/s Pe Tee, 3/4" @ /pc 8 Pc/s Pe Elbow, 3/4 @ /pc 2 Pc/s Pe Red Socket 3/4 X 1/2 @ /pc 12 Pc/s Teflon Tape, 3/4 @ /pc 1 Pc/s Gi Cap, 1" Dia. @ /pc 4 Pc/s Compression Coupling, 3/4" Dia. @ /pc 2 Pc/s Gi Tee, 1/2" @ /pc A.2 Supply And Installation Of Airconditioning Unit 1 Unit/s 2hp - Spilt-type Inverter Type @ Airconditioning Unit Including 25ft Copper Piping, Insulation, Electrical Outlet, Wiring And Drainline 1 Pc/s Angle Bar, 1-1/2 X 1-1/2 X 1/4 @ /pc 1 Kg/s E6013 Welding Rod, Wipweld @ /kg 1 Pc/s Hacksaw Blade @ /pc 1 Pc/s Grinding Disc, 4" Dia. @ /pc

Details: Description 1) 1 Unit Radiator (stock-4033-3 Rows) 2) 1 Set Overhauling Gasket 3) 2 Set/s Piston Ring 4) 3 Pc/s Oil Filter (element) 5) 3 Pc/s Fuel Filter ( Element) 6) 2 Set/s Brake Master 7) 2 Set/s Brake Shoe (front-vk65-h0708r090) 8) 2 Set/s Brake Shoe ( Rear-vk65-h1101r136) 9) 12 Pc/s Brake Rubber Cap-(8s,4l) 10) 3 Liter/s Brake Fluid 11) 2 Pc/s Fan Belt (3450-13x112011) 12) 4 Liter/s Grease 13) 1 Pc Grease Gun 14) 22 Liter/s Engine Oil 15) 5 Liter/s Transmission Gear Oil 16) 5 Liter/s Differential Gear Oil (c140) 17) 1 Set Clutch Master-(primary) 18) 1 Set Clutch Master-(secondary 7/8) 19) 2 Set/s Feed Pump 20) 6 Pc/s Oil Seal (outer, Inner) 21) 2 Pack/s Silicon 22) 8 Pc/s Hose Clip (2 1/2) 23) 1 Set Air Cleaner/filter 24) 5 Gallon/s Coolant 25) 1 Set Valve Seal 26) 5 Liter/s Gear Oil (690) 27) 5 Liter/s Gear Oil (c140) 28) 6 Liter/s Engine Oil For Diesel 29) 6 Liter/s Engine Oil For Gas Engine 30) 10 Meter/s Automotive Wire-white 31) 10 Meter/s Automotive Wire-black 32) 10 Meter/s Automotive Wire-blue #14 33) 10 Meter/s Automotive Wire-red #14 34) 50 Pc/s Automotive Fuse (blade)

Details: Description Specifications: Brand New Fx 4x2 M/t Engine: Model: 2gd-ftv (low) Type: 2.4l Diesel, 4-cylinder, 16-valve Dohc Variable Nozzle Turbo With Front Mounted Intercooler Displacement: 2393 Cc Maximum Output: 147/3,400 Hp/rpm Maximum Torque: 343/1,400-2,800 Nm/rpm Transmission: 5-speed M/t Fuel System: Fuel Injection W/common Rail Chassis: Suspension: Front-double Wishbone; Rear-leaf Spring Rigid Axle Brakes: Front-ventilated Discs; Rear-leading-trailing Drums Steering System: Rack And Pinion With Power Assist Tire/wheels: 205/70 R15 Steel Drivertrain: 4x2 Dimension And Weight: Overall Length X Width X Height: Mm-5,490 X 1,800 X 2,014/5,200 X 1,800 X 1,690 Wheelbase: Mm-3,805 Tread: Front/rear Mm-1,510/1,510 Exterior: Headlamps: Multi-reflector Halogen Bumper: Resin Front Grille: Resin Outside Rear View Mirror: Resin Interior: Seats: Front-driver: Sliding/reclining With Headrest; Passenger: Reclining With Headrest Rear- 2 Row Split/space-up Seats Seat Material: Front: Vinyl; Rear- Vinyl Steering Wheel: Urethane Meter Gauges: Analog Inside Rear View Mirror: Day And Night Instrument Panel And Center Cluster: Black Shift Knob: Urethane Sunvisor: Driver (with Ticket Holder) & Passenger Function: Airconditioning System: Rear-manual; Rear-optional Audio System: 2-din Cd/tuner/mp3/usb With Auxillary Input, 2 Speakers Safety: Srs Airbags: Driver (w/ Knee) & Front Passenger Displacement: Front-3 Point Elr X 2 Pretensioner Force Limiter Inclusions: Blinker Stickers ( Brgy. Logo, "barangay Tanglaw" & " Rescue Vehicle" Built-in Mega-phone

Details: Description Comfort Room 135 Pcs 4" Chb Non Load Bearing 12 Bags Portland Cement 2 Load Fine Sand/aggregate Mix 1 Pc Hardwood Door With Frame And Accessories 1 Pc 0.4*0.6 Aluminum Awning Window 1 Set Water Closet W/ Fittings 1 Pc Urinal W/ Fittings 2 Pcs 4" Pvc Pipes 1 Pc 2" Pvc Pipes 1 Pc 4" X 2" Wye Reducer 1 Pc 4" Clean Out Plug 6 Pcs 1/2" Ppr Pipe 4 Pcs 1/2" Ppr Elbow 1 Pc 1/2" Gate Valve 1 Pc 1/2" Stainless Faucet 1 Pc 4" X 4" Stainless Floor Drain 7 Pcs 2" X 4" X 2.0 Mm Thk Tubular Bars 1 L.s. Electrical Lightning And Wirings 60 Pcs Wall 60 X 60 Tiles 15 Pcs Floor 60 X 60 Tiles 6 Bags Tile Adhesive 1 Set Lavatory W/ Cabinet Ceiling 10 Pcs 2" X 4" 10' Wood 6 Kgs Assorted Nails 4 Pcs 1/2" Fiber Cement Board Stair And Receiving Area 24 Pcs 300 X 600 Mm Tiles 6 Pcs Stair Trim 120 Pcs 60 X 600 Mm Floor Tiles 27 Bags Tile Adhesive 4 Pcs Tile Cutter Blade Painting 2 Ltrs Masonry Neutralizer 2 Pails Permacoat Flat Latex 2 Pails Acrytex Cast 4 Pails Permacoat Latex Flat (colored) 4 Sets Roller Brush With Pan 4 Pcs Paint Brush Assorted Sizes Others 1 Set Narra Door (entrance) 2.1 X 1.0 1 Set Door Knob Set Waterproofing 3 Pails Buildrite Sapal 2 In 1 Elastomeric Waterproofing 2 Sets Roller Brush With Pan

Details: Description Corazon Locsin Montelibano Memorial Regional Hospital, Through Its Bids And Awards Committee, Intends To Procure Mms Supply (pr#2025-01-0050), Which Will Be Undertaken, In Accordance With Section 53.9 Of The Revised Implementing Rules And Regulations Of Republic Act No. 9184. Please Quote Your Best Offer For The Item/s Described Herein, Subject To The Terms And Conditions Provided. Kindly Submit Your Quotation/proposal Duty Signed By You Thru Your Duly Authorized Representative Or Courier On Sealed Envelope Not Later Than 28 January, 2025. Copies Of The Following Document Are Required Along With Your Quotation/proposal: 1. Mayor’s/business Permit 2. Philgeps Reg. Number 3. Pcab License (infra.) 4. Income/business Tax Return (for Abc’s Above P500k) 5. Omnibus Sworn Statement Sealed Quotation Will Be Submitted Manually At The Address And Contact Numbers Indicated Below Or Thru Email. **payment Terms Would Be 30 Days After The Completion Of Delivery. Subject To Tax. For Any Clarification, You May Contact Ms. Mary Ann June Araneta At Telephone No. (034) 703 1350 Local 828 / (0923 1227 457 Or Email Address At Clmmrh.procurement@yahoo.com. P.r. # 2025-01-0050 Total Estimated Cost: Php 155,400.00 1 Armoured Tracheal Tube (size 8.5) Made Of Pvc W/ Low-pressure Cuff, Blue Pilot Balloon, Valve For Luer And Luer Lock Syringe, Graduated And Radiopaque Body, Blue-mounted Connector For Fiberoptic Intubation 6,600.00 3 Pc 2 Endotracheal Tube (8.5, Cuffed W/ Inflatable Balloon) 1,400.00 5 Pc 3 Endobronchial (blocker), Fr. 7 46,000.00 2 Set 4 Brochial Blockers Fr.5 33,800.00 2 Pc 5 Brochial Blockers Fr.7 33,800.00 2 Pc 6 Brochial Blockers Fr.9 33,800.00 2 Pc