Valve Tenders

Description: Cond. & U/s Ferrous Scrap In Corroded Nature Such As Head Stock, Foot Steps, Berth Frame, Roller Shutters, Corroded/ Dinged/ Damaged Wagon Door, Zinc Coated Fs Sheets, Base Plates, Ms/gi Sheets In Full/cut/damaged/rusted/corroded/crushed Condition, Wagon Floor Sheet, Coach Door ,sliding Door Of Various Sorts & Sizes, Battery Boxes, Battery Box Door, Collapsible Gate, Punches Plate/ Sheet/ Screen, Corroded Shear Cutups, Galvanised Sheets Rusted Condition, Roof Light/tube Light Fitting With/without Ballast, Fl Housing, Tl Patti, Crushed Drums, Cfl Frame, Regulator Box, Ms Gutter, Corroded Fabrication Scrap, Carriage Fan Body Cover/end Shield/ Guard/ Blade, Pedestal Fan Guard, Air Brake Pipes, Corr. Barrels/paint Drums, Silent Block, Anchor Block, Wires, Chains, Boxes, Hoop Iron, Lamps, Wall Protector, Trough Sheets, Air Filter, Clips, Panels, Corroded Gi Pipes With/without Valves, Gi Duct, Ci Covers, Corroded/ Damaged/ Dinged Condition Coach/wagon Cutup Parts, Sheets, Equalizing Stay, Brake Anchor, Pre Cooling Outer Enclose, Corroded Round/square Pipes, Pipe Wrench In Corroded Condition, Commode Chutes, Pins, Rivets, Bolts, Nuts, Small Iron Pieces, Wire Rope/safety Rope With/without Aluminium Sling, Box Type Fitting, Antenna Mounting Pipes, Shell Of Window Ac Of Various Sorts, Dust Bin, Hood, Grs Box, M.s Pipes Of Various Sizes, Card Rack, Bond, Hs Lamp, Battery Charger Core With Iron Stand Or Frame, Iron Core, Fl Patti & Fitting Of All Types And Sorts And Sizes, Fire Extinguisher Without Cap, Fan Down Rod, Ferrous Ac Template, Train Information Display System, Packing Strips, Battery Tray, Trough Floor Sheets, Radiator Bracket, Empty Charger Without Nfs Attachments (ferrous) And Any Other Ferrous Items Of Highly Corroded Nature Released From Carriage/wagon/loco Rolling Stocks, Galvanized Sheets Of Sorts & Sizes, Sand Pipe, Fl Fitting, Rolling Shutter And All The Above Items Are Of Various Sorts And Sizes In Full/cut/broken And With/without Wooden/glass/ Rubber/ Fs End Fittings With /without Minor Non Ferrous Attachments If Any In As Is Where Is Condition. Pl.no. 98090800. Custodian: Cdms-rsf-gsd-per. Location: A Row Bin 12 Note: 1) Cutting Permitted To Heavy Nature Items Only. 2) Loading By Crane Is Also Permitted.3) If Any Non-ferrous Materials Found Should Be Handed Over To Custodian.

Details: Description Republic Of The Philippines City Of Bais -o0o- Bids And Awards Committee Invitation To Apply For Eligibility And To Bid The City Government Of Bais Invites Interested Bidders To Apply For Eligibility And To Bid For Various Improvement Of Operation Center, City Disaster Risk Reduction Management Office, Viz: Item Approved Budget For The Contract (abc) Pr No. 717-24 Php 1,065,020.00 1 15 Lgth Angle 40mm X 40mm X 5mm Thk X 6.0m Lgth 2 15 Lgth Angle 50mm X 50mm X 5mm Thk X 6.0m Lgth 3 20 Lgth Pipe, Gi, Nps 50mm Ø (2" Ø) X 6.0m Lgth S40 4 8 Lgth Steel Plate, Galvanize, 4' X 8' Gauge 14 5 50 Pcs Stainless Steel Bolt Nut Flat And Lock Washer Set, M10 X 70mm 6 50 Pcs Stainless Steel Bolt Nut Flat And Lock Washer Set, M6 X 60mm 7 50 Pcs Stainless Steel Bolt Nut Flat And Lock Washer Set, M6 X 20mm 8 50 Pcs Bolt Expansion Screw Shell Anchor Expansion Bolt, M8 X 70mm 9 10 Pcs Grinding Disc For Metal, Depressed Center, Aluminum-oxide, 100 Mm Ø 10 75 Kilo Welding Electrode, 1/8" Ø, E6013 11 8 Can Roofing Sealant, High Grade, 1/2l/can 12 8 Set Marine Epoxy, 1/2l/can 13 4 Roll Galvanized Cyclone Wire Ga8, 5 Feet X 6m (2 Inch Opening) 14 50 Meter Chain Hot Dipped Galvanized, Heavy Duty 8mm 15 10 Pcs Laminated Padlock 40mm/50mm Keyed Pad Lock Security Lock Solid Anti-theft, Made Up Of Multiple Layers Of Laminated Steel 16 20 Pcs Hacksaw Carbon Steel Blade Hd (12") 17 800 Pcs Chb 4" 18 100 Bags Portland Cement 19 30 Cu.m. Fine Aggregate (sand), 4.75mm Ø Max Size 20 150 Lgth Deformed Bar, 10mm Diameter X 6.0m Length 21 20 Kilo Gi Tie Wire, #16 22 200 Pcs Polished Tile, 600mm X 600mm Beige 23 10 Sheet Marine Plywood, 4' X 8', 1/2" Thk 24 10 Sheet Marine Plywood, 4' X 8', 1/4" Thk 25 20 Pair Soft Close Drawer Guide Heavy Duty, 18 Inch 26 6 Pcs Tile Cutter Wheel (dry) 100mm Ø 27 4 Pack Tile Grout (2 Kilo/pack) Beige 28 8 Gallon Paint, Flat Wall Enamel, Alkyd-based 29 10 Can Paint Thinner (3l/can) 30 10 Gallon Paint, Acrylic Semi-gloss, Water-based Paint (white Wash/tulle White) 31 10 Gallon Paint, Acrylic Semi-gloss, Water-based Paint (white) 32 8 Gallon Paint, Single Complonent Zinc Phosphate, Anti-corrosive Metal Primer 33 10 Gallon Paint, Odourless Qde, Water-based (suede/light Tan) 34 10 Gallon Paint, Quick Dry Enamel, Alkyd-based (red) 35 10 Gallon Paint, Quick Dry Enamel, Alkyd-based (orange) 36 10 Gallon Paint, Quick Dry Enamel, Alkyd-based (yellow) 37 10 Gallon Paint, Quick Dry Enamel, Alkyd-based (white) 38 8 Can Acrytex Primer 39 8 Can Acrytex Cast 40 8 Can Acrytex Reducer 41 10 Pcs Paint Brush, 2" 42 10 Pcs Paint Brush, 4" 43 8 Set Paint Roller 7-inch With Pan 44 100 Pcs Sand Paper Waterproof # 120 45 100 Pcs Sand Paper Waterproof # 160 46 75 Box Acoustic Foam Panels Self-adhesive Fireproof Sound Proof Treatment Wall, 300mm X 300mm X 8mm, Polyester Fiber, 0.9 Sound Absorption, (12 Pcs/box) 47 20 Pcs Rubber Cement, (360cc/bottle) 48 15 Pcs All Purpose Silicon Sealant (black) 49 5 Rolls Tw Copper Wire # 10 Awg (5.5 Mm²) 50 3 Rolls Tw Copper Wire # 12 Awg (3.5 Mm²) 51 4 Rolls Tw Copper Wire # 14 Awg (2.0 Mm²) 52 10 Pcs Utility Box, 2" X 4" 53 15 Pcs Junction Box W/ Cover & Screws 54 6 Rolls Flexible Hose Pvc, 1/2" X 100m 55 10 Pcs Circuit Breaker W/ Inclosure, 30a 56 10 Pcs Circuit Breaker W/ Inclosure, 20a 57 15 Pcs Led Exit Signage Emergency Acrylic 3 Watts Clear Aluminum Box, Overcharge Protection, Led Charging Indicaton, Automatic Switch Ni-cd 1.2v Battery And Charger, Pmma (polymethyl Methacrylate) Board 58 20 Pcs Led Parlamp E27, 12w-15w, 180 - 265v, Daylight 59 20 Pcs Led Bulb E27, 12w-15w, 180 - 265v, Daylight 60 10 Rolls Electrical Vinyl Tape, Flame Retardant, Professional Grade, 3/4" X 66' X 0.007", 600v @ 80° C Rating 61 4 Pcs Gate Valve, Brass, 1 1/2" Heavy Duty, 150psi 62 4 Pcs Gate Valve, Brass, 1" Heavy Duty, 150psi 63 40 Pcs. Stainless Heavyduty Flexible Hose, 16" Length (1/2" X 1/2") 64 10 Set Stainless (304) Shower Set; With Shower Head Set, With Hose And Holder And Two Way Faucet 65 20 Set Toilet Flush Set Fittings Dual Button Flush Valve Toilet Inlet Valve Toilet Fittings 66 20 Pcs. Stainless (304) One Way Angle Valve (1/2" X 1/2") 67 20 Pcs. Stainless (304) Two Way Angle Valve (1/2" X 1/2" X 1/2") 68 20 Pcs. Stainless (304) Bidet Toilet Sprayer And Hose 69 20 Pcs. Stainless (304) Urinal Flush Valve 70 10 Pcs. Floor Drain, Anti-clogging, 4" X 4" Stainless (304) 71 20 Lgth Ppr Pipe Pn20, 20mm Ø Nominal X 4.0m 72 10 Pcs. Ppr Elbow Pn20, 20mm Ø 73 6 Pcs. Ppr Elbow Pn20, 25mm Ø 74 10 Pcs. Ppr Coupling Pn20, 20mm Ø 75 20 Pcs. Ppr Coupling Pn20, 25mm Ø 76 20 Pcs Ppr Tee Pn20, 20mm Ø 77 10 Pcs Ppr Tee Pn20, 25mm Ø 78 8 Pcs. Ppr Coupling Reducer Pn20, 25mm X 20mm 79 30 Pcs. Ppr Threaded Female Elbow W/ Brass Pn20, 20mm 80 10 Pcs. Ppr Threaded Female Tee W/ Brass Pn20, 20mm 81 10 Pcs. Ppr Threaded Female Adapter Coupling W/ Brass Pn20, 20mm 82 10 Pcs. Ppr Threaded Male Adapter Coupling W/ Brass Pn20, 20mm 83 10 Pcs. Ppr Threaded Female Adapter Coupling W/ Brass Pn20, 25mm 84 10 Pcs. Ppr Threaded Male Adapter Coupling W/ Brass Pn20, 25mm 85 15 Pcs. Ppr Threaded Male Union Pn20, 25mm 86 15 Pcs. Ppr Threaded Male Union Pn20, 20mm 87 15 Pcs. Ppr Threaded Female Union Pn20, 25mm 88 15 Pcs. Ppr Threaded Female Union Pn20, 20mm 89 10 Pcs. Ppr Gate Valve Pn20, 25mm 90 10 Pcs. Ppr Gate Valve Pn20, 20mm 91 10 Lgth Sanitary Pipe Pvc, S-1000, 100mmø X 3.0 92 10 Lgth Sanitary Pipe Pvc, S-1000, 50mmø X 3.0 93 4 Pcs Sanitary Tee Pvc, S-1000, 100mmø 94 2 Pcs Sanitary Elbow Pvc, S-1000, 100mmø 95 4 Pcs Sanitary Wye Pvc, S-1000, 100mmø 96 5 Pcs Sanitary Coupling Pvc, S-1000, 100mmø 97 6 Pcs Sanitary Clean-out Pvc, S-1000, 100mmø 98 10 Pcs Sanitary Tee Pvc, S-1000, 50mmø 99 10 Pcs Sanitary Elbow Pvc, S-1000, 50mmø 100 10 Pcs Sanitary Coupling Pvc, S-1000, 50mmø 101 4 Can Pvc Pipe Cement, 400cc 102 20 Pcs Teflon Tape Pipe Thread Seal Tape, 1" X 10m The Approved Budget For The Contract Is To Be Taken From Improvement Of Operation Center (res. No. 485 Series 2024 Ordinance No. 36). Partial Bids Are Allowed, However, Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. In Order To Qualify, Bidders Should Conform To The Eligibility Criteria As Prescribed Under Sec. 23 And 25 Of The Revised Irr-a Of R.a. 9184. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary "pass/fail" Criteria As Specified In The Revised Irr-a Of R.a. 9184. As Such Non-submission Of Any Of The Required Documents Will Result In The Disqualification Of The Bidder. Due To Covid-19 Pandemic And Quarantine Regulations Of Every Provinces, Presence Of The Bidders Is Not Necessary. The Bids And Awards Committee (bac) Allows The Submission Of Bids Through Electronic Means And Submission Through Courier Services. The Following Documents Are Required For Submission: A. Eligibility Documents Including Technical Documents (1st Envelope): 1. Registration Certificate From Dti For Sole Proprietorship, Sec For Corporation Or Cda For Cooperative. 2. Valid And Current Mayor's Permit Where The Principal Place Of Business Of The Bidder Is Located. 3. Bir Registration Certificate With Taxpayer’s Identification Number. 4. Statement Of The Bidder Of All Its Ongoing And Completed Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid, Within The Relevant Period Where Applicable. The Statement Shall Be Supported With A Copy Of The Contracts/purchase Or Job Orders; And End-users Acceptance Or Delivery Receipt Duly Acknowledged. The Bidder Must Have Completed Within A Period Of Five (5) Years From The Date Of Submission And Receipt Of Bids, A Single Contract That Is Similar To The Contract To Be Bid Whose Value Must Be At Least Fifty (50%) Percent Of The Abc. However, In The Case Of Expendable Supplies, Said Single Contract Must Be At Least Twenty Five (25%) Percent Of The Abc, Or; The Bidder Should Have Completed At Least Two (2) Similar Contracts And The Aggregate Contract Amounts Should Be Equivalent To At Least The Percentage Of The Abc As Required Above. 5. Certificate Of Product Registration (cpr) From Food And Drug Administration (fda). (for Medicine Only)* 6. Certificate Of Good Manufacturing Practice From Fda. (for Medicine Only)* 7. Batch Release Certificate From Fda. (for Medicine Only)* 8. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/dealer Of The Product(s)/item(s). (for Medicine Only)* 9. License To Operate (fda). (for Medicine Or Medical Supplies/equipment)* 10. Certificate Of Accreditation From Bureau Of Local Government Finance (blgf) (for Accountable Forms Only)* 11. Audited Financial Statements, Showing, Among Others, The Bidder's Total And Current Assets And Liabilities, Stamped "received" By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission. 12. The Bidder's Updated Computation For Its Net Financial Contracting Capacity (nfcc) Bearing The Date Thereof Must At Least Be Equal To The Abc To Be Bid, Or A Commitment From A Universal Or Commercial Bank To Extend A Credit Line In Favor Of The Bidder If Awarded The Contract To Be Bid (cl) Must At Least Be Equal To Ten Percent (10%) Of The Abc To Be Bid.* 13. Valid Joint Venture Agreement (jva), In Case Venture Is Already In Existence. 14. All Bids Must Be Accompanied By Bid Security In Any Or Combination Of The Acceptable Forms (below):* Form Of Bid Security Amount Of Bid Security A) Cash, Cashier's/manager's Check, Bank Draft/guarantee Confirmed By A Universal Or Commercial Bank. Two Percent (2%) B) Irrevocable Letter Of Credit Issued By A Universal Or Commercial Bank; Provided, However, That It Shall Be Confirmed Or Authenticated By A Commercial Or Universal Bank'; If Issued By A Foreign Bank. C) Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security. Five Percent (5%) D) Bid Securing Declaration Prospective Bidder May Also Submit Bid Securities In The Form Of Cashier's/manager's Check, Bank Draft/guarantee, Or Irrevocable Letter Of Credit From Other Banks Certified By The Bsp As Authorized To Issue Financial Statement. Bids And Bid Securities Shall Be Valid For A Reasonable Period As Determined By The Head Of The Procuring Entity, But In No Case Shall Exceed 120 Calendar Days From The Date Of The Opening Of Bids. 15. Production/delivery Schedule.* 16. Manpower Requirements* 17. After-sales Service/parts (if Applicable) 18. Sworn Statement By The Prospective Bidder Or Its Duly Authorized Representative As To The Following: A) It Is Not Blacklisted Or Barred From Bidding By The Gop Or Any Of Its Agencies; Office Corporations, Or Lgu's, Including Foreign Government/foreign Or International Financing Institutions Whose Blacklisting Rules Have Been Recognized By The Gppb; B) Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statement And Information Provided Therein Are True And Correct; C) It Is Authorizing The Head Of Procuring Entity Or The Duly Authorized Representative/s To Verify All Documents Submitted; D) Authority Of The Signatory; E) Affidavit Of Disclosure Of No Relationship; F) Certification On Bidder's Responsibilities; G) It Comply With Existing Labor Laws And Standards, In The Case Of Procurement Of Services; H) It Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Activity, And I) In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. 19. Technical Specifications With Brochures, If Applicable.* 20. Certificate Of Philgeps Registration* 21. Tax Clearance* 22. Latest Income And Business Tax Returns (quarterly/monthly); (optional/required Upon Post-qualification)** Note:*required Documents To Be Submitted By Pre-qualified Suppliers/bidders Per Bac Resolution No. 74-g Dated July 30, 2019. **optional Submission During The Opening Of Bids But Mandatory Requirement Upon Post-qualification Per Bac Resolution No. 58-d Dated August 4, 2020. B. Financial Documents: (2nd Envelope) (a) Bid Prices In The Bill Of Quantities Failure To Submit The Above Requirements On Time Or A Finding Against The Veracity Of Such Shall Be Ground For The Forfeiture Of The Bid Security And Disqualify The Bidder For Award. Performance Security And Warranty Shall Be Governed By The Provisions Of Secs. 39 And 62, Respectively, Of The Revised Irr-a Of R.a. 9184. Bid Documents Can Be Obtained Upon Payment Of Non-refundable Fee Equivalent To The Total Amount Of The Abc Of The Items In Which Interested Bidders Intend To Bid, In Accordance With The Guidelines On The Sale Of Bidding Documents, Appendix 25 Of The Revised Irr Of R.a. 9184: Approved Budget For The Contract (abc) Maximum Cost Of Bidding Documents (in Philippine Peso) 500,000 And Below 500.00 More Than 500,000 Up To 1 Million 1,000.00 More Than 1 Million Up To 5 Million 5,000.00 More Than 5 Million Up To 10 Million 10,000.00 More Than 10 Million Up To 50 Million 25,000.00 More Than 50 Million Up To 500 Million 50,000.00 More Than 500 Million 75,000.00 Bid Documents Can Be Obtained At The Bac Secretariat, Office Of The Bids And Awards Committee, This City, Tel. No. (035) 402-8047, Anytime During Office Hours; And Can Also Be Inquired For Further Information Or Particulars. All Other Particulars Relative To The Procurement Process Shall Be Governed By The Revised Implementing Rules And Regulations Of R.a. 9184 Otherwise Known As The Government Procurement Reform Act. Pre-bid Conference Will Be On January 14, 2025, 1:30 P.m. At The City Budget Office, 2nd Floor, City Hall Annex Building, This City. Eligibility Requirements Including Technical Documents And Financial Documents Shall Be Submitted Together Each In Separate Sealed Envelopes Duly Marked As Such On January 28, 2025 At The City Budget Office, 2nd Floor, City Hall Annex Building, This City, At 1:30 Pm At Which Date, Place, And Time Said Envelopes Shall Be Opened In The Presence Of The Members Of The Bac, The Attending Bidders, The Observers, Or Their Duly Authorized Representative. Late And Unsealed Bids Shall Not Be Accepted. The City Government Of Bais Reserves The Right To Accept Or Reject Any Bid, And To Annul The Bidding Process And Reject All Bids At Anytime Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. (sgd.) Atty. Romela Mae L. Napao City Administrator Chair, Bids And Awards Committee

Details: This Is A Sources Sought Announcement Only. It Is Neither A Solicitation Announcement Nor A Request For Proposals Or Quotes And Does Not Obligate The Government To Award A Contract. Requests For A Solicitation Will Not Receive A Response. Responses To This Sources Sought Must Be In Writing. The Purpose Of This Sources Sought Announcement Is For Market Research To Make Appropriate Acquisition Decisions And To Gain Knowledge Of Potential Qualified Service-disabled Veteran Owned Small Businesses, Veteran Owned Small Businesses, 8(a), Hubzone And Other Small Businesses Interested And Capable Of Providing The Services Described Below. Documentation Of Technical Expertise Must Be Presented In Sufficient Detail For The Government To Determine That Your Company Possesses The Necessary Functional Area Expertise And Experience To Compete For This Acquisition. Responses To This Notice Shall Include The Following: (a) Company Name (b) Address (c) Point Of Contact (d) Phone, Fax, And Email (e) Unique Entity Id (f) Cage Code (g) Tax Id Number (h) Type Of Small Business, E.g. Services Disabled Veteran Owned Small Business, Veteran-owned Small Business, 8(a), Hubzone, Women Owned Small Business, Small Disadvantaged Business, Or Small Business Hubzone Business And (i) Must Provide A Capability Statement That Addresses The Organizations Qualifications And Ability To Perform As A Contractor For The Work Described Below. the Southern Arizona Va Health Care System (savahcs) Located At: 3601 S. 6th Ave, Tucson, Az 85723 Is Seeking A Potential Qualified Contractor To Establish Full Maintenance Service For The Equipment And Systems Listed Below. important Information: The Government Is Not Obligated To Nor Will It Pay For Or Reimburse Any Costs Associated With Responding To This Sources Sought Synopsis Request. This Notice Shall Not Be Construed As A Commitment By The Government To Issue A Solicitation Or Ultimately Award A Contract, Nor Does It Restrict The Government To A Particular Acquisition Approach. The Government Will In No Way Be Bound To This Information If Any Solicitation Is Issued. The Va Is Mandated By Public Law 109-461 To Consider A Total Set-aside For Service-disabled Veteran Owned Small Business Set Aside. However, If Response By Service-disabled Veteran Owned Small Business Firms Proves Inadequate, An Alternate Set-aside Or Full And Open Competition May Be Determined. No Sub-contracting Opportunity Is Anticipated. The North American Classification System (naics) Code For This Acquisition Is 333922 (500 Employees). notice To Potential Offerors: All Offerors Who Provide Goods Or Services To The United States Federal Government Must Be Registered In The System For Award Management (sam) At Www.sam.gov. Additionally, All Service-disabled Veteran Owned Businesses Or Veteran Owned Businesses Who Respond To A Solicitation On This Project Must Be Registered With The U.s. Small Business Administration Located At Https://veterans.certify.sba.gov All Interested Offerors Should Submit Information By E-mail To William.cornick@va.gov. All Information Submissions To Be Marked Attn: William Cornick, Contract Specialist And Should Be Received No Later Than 4:30 Pm Pst On January 23, 2025. service: the Contractor Will Provide The Following: preventive Maintenance Services To Include Inspect, Clean, Adjust, Calibrate, And Lubricate Pneumatic Tube System all Maintenance Will Be Performed In Accordance With Translogic Maintenance And Service Manual blower Units verify Shifter Valve Assembly Properly Positions To All 4 Positions. Check For Cleanliness For The Position Board And Housing. Inspect Sifter And Air Discs Assemblies. check Shifter Valve Motor For Noise And Vibration, Overheating, And Output. check Screen Box For Cleanliness And Possible Leaks. verify Controls And Indicators Are Functioning Normally. check Blower Hose For Leaks, Tight Connections, And Hose Clamp Failures. check External Silencer For Air Leaks And Tight Connections. inspect Enclosed Blower Air Intake And Side Access Weldment For Cleanliness, Tightness, And Damage. check Spare Valve Assembly For Proper Operation And External Damage. transfer Units verify Transfer Units, Motor, Brake, And Position Sensors Properly Position Transition Tube To All Ports. inspect Sealing Ring, Guide Channel (1x2) And Rear Bearing/seal (1x6 And 1x4) For Adequate Lubrication And Operational Condition. verify Operation Of Carrier Sensor. listen For Excessive Or Unusual Noise During Movements. check For Damaged Wiring And Components. inspect Flangette Bearing Unit For Smooth Operation Or Excessive Play. vacuum Bypass Assemblies verify Solenoid Actuates Valve Seal When Transfer Unit S Transition Tube Is Turning. examine Rubber Seal And Flap For Cracking, Deterioration, And Assure Proper Operation. check For Damaged Writing Or Component. is Stations test Dispatcher Motor, Brake And Position Sensors For Proper Operation And Accurate Positioning, test Side Plate Motor, Brake And Position Sensors For Proper Operation And Accurate Positioning. clean And Inspect Carrier Sensor And Verify Proper Operation, verify Proper Operation Of The Full Bin Sensor. inspect Slide Plate And Dispatcher Seals For Proper Operation And Physical Integrity. verify All Controls And Indicators Function Properly. check For Damaged Wiring Or Components. inspect Frame And Housing For Cleanliness And Physical Integrity. systems Will Receive Annual Maintenance, With The Service Technicians Having Two Visits Per Year To Distribute Workload. Month Of Preventive Maintenance Services To Be Established With Vendor Post Contract Award. system: pneumatic Tube System, To Include Blowers, Transfer Units, And Is Stations, At Southern Arizona Va Healthcare System. location: savahcs (tucson, Az) Performance: planned Maintenance Will Be Scheduled With A Contact Person As Assigned By The Contracting Officer S Representative (cor), Point Of Contact (poc) Or Designee. Before Doing Any Work, The Service Representative Will Report To Healthcare Technology Management (htm) To Log In And Obtain A Contractor Identification Badge, Sign A Log Maintained By Htm Service And After The Work Is Done, Sign Out. This Log Will State The Nature Of The Visit And The Time And Place Of The Visit. Htm Service Can Be Contacted At (520) 792-1450 Ext. 1-6679. failure To Carry Out The Above Procedures Will Be Considered As A Failure To Document The Service Visit And Will Constitute A Failure To Perform. normal Duty Hours Are 8:00 A.m. Through 4:30 P.m., Monday Through Friday, Not Including Federal Holidays. When Contact With Htm Is Required Outside Of Normal Duty Hours, The Utility System Repair Operator (usro) May Be Contacted As An Alternate. The Hospital Operator At Extension "0" Can Contact The Usro Operator Via Radio. at The Completion Of The Service Call, The Service Representative Will Submit A Complete Service Report To Htm, As Described In Section 5, Documentation. Documentation: service Reports Will Be Provided For All Preventive Maintenance Activities At The End Of Each Scheduled Visit, No Exceptions. Response To Service Requests: the Contractor Must Respond To Requests For Emergency Service In The Following Manner: a Competent Service Representative Adequately Equipped With Tools, Test Instruments And Repair Parts Will Arrive At The Savahcs Within The Designated Response Time. the Competent Service Representative Will Be Prepared To Begin Work Immediately To Resolve The Complaint As Expressed By The Cor, Poc Or Designee When Service Was Requested. Work Needed To Resolve The Complaint Will Continue Without Interruption Until The Problem Is Resolved. the Service Representative Will Come Equipped With All The Service/technical Manuals Needed To Perform The Work. the Service Representative May Contact Va Staff By Phone Before Arrival At The Savahcs. Such Contacts, However, Will Not Serve To Alter The Requirements For Arrival On-site Except When The Request For Service Is Withdrawn By Biomedical Engineering. the Designated Response Time For This Contract Is 24 Hours From The Time Of The Request For Service. If Repeated Requests Are Made Before The Arrival Of Contractor S Repairer, The First Request Will Determine The Required Time Of Arrival. all Requests For Repair Service Will Be Considered Requests For Emergency Service Unless A Statement To The Contrary Is Made By The Cor, Poc Or Designee. Such Statements Will Be Documented On The Service Report. Government Repairs: Government Employees Will Work On Contract Equipment Only With Authorization Of The Contractor Or Following The Failure Of The Contractor To Respond. The Government Is Not Obligated To Perform Any Work On Contract Equipment.

Details: Description . Sjn 959 Foton Ambulance Brcc 1 Pc Power Relay 2 Pcs Battery Terminal 1 Pc Penetraiting Oil 1 M Royal Cord 2 Pcs High Amp Terminal 2 Pcs Wiper Blade Wurth 2 Pcs Wurth Diesel Treatment Battery Charge 1 Set Aircon Discharge Hose Assy Freon 1 Pc Sanden Oil Labor 10 M Autotune #18 1 L Wurth Coolant 2 Pcs Brake & Parts Cleaner B3 A797 Mitsubishi L300 Ambulance 1 Set Cylinder Block Kiner 4 Pcs Cylinder Piston 1 Set Piston Ring Std 1 Set Engine Valves 1 Set Overhouling Gasket Machine Chop Cylinder Resurface 1 Set Valves Seal 2 Pcs Thread Locker 6 Pcs Brake & Parts Cleaner 1 Pc Penetraiting Oil 1 Pc Genuine Timing Belt 1 Pc Timing Belt Tensioner 1 Pc Timing Belt Bearing 1 Pc Clutch Pressure Plate 1 Pc Clutch Disk 1 Pc Clutch Releasing Bearing 8 L Castrol Crb Turbo Max 1 Pc Stp Oil Additivies 2 Pcs Main Drive Belt 4 Liters Castrol Transmax Transmission Oil 1 Pc Oil Filter 1 Pc Air Intake Element 1 Pc Fuel Filter 1 Set Injection Pump Reconditon/calbration Labor Aar 1794 Isuzu Bucket Truck 1 Box Auto Wire #16 20 Pcs Electrical Tape 50 Pcs Shrinking Tube 1 Set Fabricated Harness Railings 1 Pc Dielectric Grease Upper Control Box Cover Repair Wire Harness Cover Repair 4 Pcs Brake & Parts Cleaner 2 Plastic Cable Ties Labor 2 Pcs Enamel Paint Primer 2 Pcs Enamel Paint All Weather Yellow

Details: Description Province Of Zambales I B A Project Reference Number/purchase Request No.. Prmmh-2024-883 (tf) President Ramon Magsaysay Memorial Hospital (prmmh) Location Of The Project: Request For Quotation Date: January 3, 2025 Rfq No.: 04-2025 Name Of Company: Address: Business Permit No.: Tin No. Please Quote Your Best Offer For The Item/s Described Below, Subject To The Terms And Conditions Provided At The Dorsal Portion Of This Request For Quotation. Submit Your Quotations Duly Signed By You Or Your Duly Representative Not Later Than Seven (7) Days. Open Quotation May Be Submitted, Manually Or Through Facsimile Or Email At The Address And Contact Numbers Indicated Below. Noime P. Ballesteros Oic-pgso Bac Vice Chairman Goods & Consulting Services After Having Carefully Read And Accepted The Terms And Conditions, I/we Submit Our Quotation/s For The Item/s As Follows: Item Description Quantity Approved Offer Price Compliance Remarks Budget Of With Technical The Specifications (qty) Contract (please Check) Estimate Yes No Unit Cost Total Cost Qty Unit Price Total Price Various Materials For Use In The Upgrading Of Water Line: Location: Dietary Section, Laboratory Section And Or Section(including Drinking Fountains; Water Line Connection At Ms2, Payward Extension,function Hall Corrigidor, Opd Triage And Mab Lobby) Of The Prmmh, Iba, Zambales. Water Distribution Pipe Line: 1 Pvc Blue Pipe, 1/2"ø 25 Pcs. 150.00 3,750.00 2 Pvc Blue Pipe, 3/4"ø 25 Pcs. 210.00 5,250.00 3 Pvc Blue Pipe, 1"ø 25 Pcs. 300.00 7,500.00 4 Pvc Coupling Reducer,1"x 3/4" 22 Pcs. 30.00 660.00 5 Pvc Coupling Reducer, 1"x1/2" 10 Pcs. 30.00 300.00 6 Pvc Coupling, 1/2" 16 Pcs. 15.00 240.00 7 Pvc Coupling, 3/4" 16 Pcs. 22.00 352.00 8 Pvc Coupling, 1" 13 Pcs. 24.00 312.00 9 Pvc Tee, 1/2" 7 Pcs. 22.00 154.00 10 Pvc Tee, 3/4" 8 Pcs. 36.00 288.00 11 Pvc Tee, 1" 6 Pcs. 42.00 252.00 12 Pvc Tee Reducer, 1"x3/4" 15 Pcs. 48.00 720.00 13 Pvc Tee Reducer, 1"x1/2" 15 Pcs. 48.00 720.00 14 Pvc Tee, 1/2" X 3/4" 15 Pcs. 30.00 450.00 15 Pvc Elbow, 1/2" 30 Pcs. 21.00 630.00 16 Pvc Elbow, 3/4" 30 Pcs. 24.00 720.00 17 Pvc Elbow, 1" 30 Pcs. 42.00 1,260.00 18 Pvc Female Threaded Adaptor,1/2" 12 Pcs. 18.00 216.00 19 Pvc Female Threaded Adaptor, 3/4" 10 Pcs. 24.00 240.00 20 Pvc Female Threaded Adaptor, 1" 8 Pcs. 36.00 288.00 21 Pvc Male Threaded Adaptor, 1/2" 12 Pcs. 18.00 216.00 22 Pvc Male Threaded Adaptor, 3/4" 10 Pcs. 24.00 240.00 23 Pvc Male Threaded Adaptor, 1" 15 Pcs. 36.00 540.00 24 Pvc Gate Valve, 1/2" 7 Pcs. 102.00 714.00 25 Pvc Gate Valve, 3/4" 7 Pcs. 120.00 840.00 26 Pvc Gate Valve, 1" 7 Pcs. 240.00 1,680.00 27 Pvc Union Patente, 1/2" 5 Pcs. 66.00 330.00 28 Pvc Union Patente, 3/4" 5 Pcs. 96.00 480.00 29 Pvc Union Patente, 1" 5 Pcs. 156.00 780.00 30 G.i Ball Valve, 1" 2 Pcs. 1,320.00 2,640.00 31 G.i Gate Valve, 1" 5 Pcs. 1,320.00 6,600.00 32 G.i Nipple, 1/2" X 4" 8 Pcs. 34.00 272.00 33 G.i Nipple, 1/2" X 5" 8 Pcs. 36.00 288.00 34 G.i Nipple, 1/2" X 6" 1 Pc. 42.00 42.00 35 G.i Nipple, 1/2" X 7" 10 Pcs. 46.00 460.00 36 G.i Nipple, 1/2" X 8" 1 Pc. 48.00 48.00 37 G.i Nipple, 1/2" X 10" 10 Pcs. 52.00 520.00 38 G.i Nipple, 1/2" X 12" 1 Pc. 54.00 54.00 39 G.i Elbow, 1/2" 2 Pcs. 60.00 120.00 40 G.i Coupling, 1/2" 1 Pc. 48.00 48.00 41 G.i Coupling Reducer, 1/2" X 1" 5 Pcs. 90.00 450.00 42 Teflon Tape, 1/2" 20 Pcs. 22.00 440.00 43 Pvc Pipe Solvent Cement,400cc 2 Pcs. 300.00 600.00 44 Hacksaw Frame W/ Blade 1 Pc. 672.00 672.00 45 Concrete Cutting Disc, 4" 2 Pcs. 420.00 840.00 46 Metal Clamp U Shape, 1" W/ Screw 60 Pcs. 18.00 1,080.00 47 Metal Clamp,3/4" W/ Screw 60 Pcs. 24.00 1,440.00 48 Metal Clamp, 1/2" W/ Screw 60 Pcs. 18.00 1,080.00 49 Pvc Clamp, 3/4" 1 Pc. 180.00 180.00 50 Pvc Clamp, 1/2" 2 Pcs. 144.00 288.00 51 Hdpe Pipe Sdr11,1"øx100m (blue) 5 Pcs. 8,160.00 40,800.00 52 Pvc Pipe Cutter 1 Pc. 600.00 600.00 53 Water Meter 3 Pcs. 1,800.00 5,400.00 Compression Fittings For Pe Pipes: 54 Compression Tee, 90°, 1" 12 Pcs. 274.00 3,288.00 55 Compression Male Tee, 1" 5 Pcs. 274.00 1,370.00 56 Compression Female Tee, 1" 5 Pcs. 274.00 1,370.00 57 Compression Tee Reducer,1" X 3/4" 10 Pcs. 238.00 2,380.00 58 Compression Elbow, 1" 15 Pcs. 154.00 2,310.00 59 Compression Male Elbow, 1" 5 Pcs. 154.00 770.00 60 Compression Female Elbow 5 Pcs. 166.00 830.00 61 Compression Coupling, 1" 15 Pcs. 130.00 1,950.00 62 Compression Coupling Reducer, 1" X 3/4" 10 Pcs. 214.00 2,140.00 63 Compression Female Adapter, 1" 8 Pcs. 166.00 1,328.00 64 Compression Male Adapter, 1" 8 Pcs. 166.00 1,328.00 65 Compression End Cap, 1" 4 Pcs. 63.00 252.00 Xxxxxxxxxxxxxxxxxxxxxxx Grand Total: 114,400.00 Zone V, Ground Floor, Capitol Building, Iba, Zambales, Philippines 2201 0953-430-4258 *marianet_ppdo@yahoo.com *jja121276@hotmail.com Signature Over Printed Name Contact Numbers (landline And/or Cellphone No.)/e-mail Address Terms And Conditions: 1 Bidders Shall Provide Correct And Accurate Information Required In This Form. 2 Bidders May Quote For Any Or All The Items. 3 Price Quotation/s Must Be Valid For A Period Of Thirty (30) Calendar Days From The Date Of Submission. 4 Price Quotation/s, To Be Denominated In Philippine Peso Shall Include All Taxes, Duties And/or Levies Payable. 5 Quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. 6 Award Of Contract Shall Be Made To The Lowest Quotation (for Goods And Infrastructure) Or, The Highest Rated Offer (for Consulting Services) Which Complies With The Minimum Technical Specifications And Other Terms And Conditions Stated Herein. 7 Any Interlineations, Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initiated By You Or Any Of Your Duty Authorized Representative/s. 8 The Item/s Shall Be Delivered Within Fifteen (15) Calendar Days From Receipt Of Notice To Proceed. 9 The Provincial Government Of Zambales Shall Have The Right To Inspect And/or Test The Goods To Confirm Their Conformity To The Technical Specifications. 10 Liquidated Damages Equivalent To One Tenth Of One Percent (0.001%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. The Provincial Government Of Zambales Shall Rescind The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. Prepared By: (sgd.) Jean A. Bringas

Details: Lot Sa001 - Heavy Electrical Cable, Lot Sa002 - Mixed Electrical Cable, Lot Sa003 - Mixed Electrical Cable, Lot Sa004 - Heavy Electrical Cable, Lot Sa005 - Mixed Contaminated Non Ferrous Stainless Steel (8 Off), Lot Sa006 - Various Mixed Stainless Steel Flow Meters (3 Off), Lot Sa007 - Contaminated Non Magnetic Stainless Steel Shafts (3 Off), Lot Sa008 - Mixed Contaminated Stainless Steel Ball Valves (2 Off), Lot Sa009 - Mixed Contaminated Magnetic Stainless Steel (5 Off), Lot Sa010 - Video Tec Camera (4 Off), Lot Sa011 - Mixed Contaminated Non Ferrous Stainless Steel (1 Off), Lot Sa012 - Various Types And Sizes Stainless Steel (23 Off), Lot Sa013 - Stainless Steel Pipes 304 (46 Off),

Details: Description Engine Specs And Accessories: No Of Cylinder: 4 Valves Per Cylinder: 4 Valve Configuration: Dohc Fuel Supply System: Crdi Compression Ratio: 15.0:1- 17.0:1 Engine: 3.0l Diesel Engine, 4 Cylinder 16 Valve Dohc Transmission: Manual Steering Type: Electronic/ Hydraulic Power Steering Gear: Type Rack & Pinion Turning Radius: 4.5-5.5m Tire Type And Size: Radial Alloy Wheel Size 13-16 Inch Fuel Type: Diesel Horse Power: 154-174 Hp Torque: 250-350 Nm Engine Displacement: 2872-2982cc No Of Doors: 4 Fuel Tank Capacity: 60-80 Liters Width: 1590-1695mm Front Tread: 1380-1470mm Rear Tread: 1420-1465mm Wheel Base: 2150-2570mm Length: 3964-4695mm Front Suspension: Double Wishbone Rear Suspension: Coil Spring/ Leaf Spring Anti-lock Braking System: Equipped Driver Airbag: Equipped Passenger Airbag: Equipped Crash Sensor: Side Impact Beam Engine Check Warming: Equipped Rear View Mirror: Equipped Air Conditioner: Equipped Accessory Power Outlet: Equipped Low Fuel Warming Light: Equipped Adjustable Seats: Equipped Cup Holders-front: Equipped Cd Player: Equipped Fmam/radio: Equipped Integrated 2din Audio: Equipped Usb & Auxiliary Input: Equipped Bluetooth Connectivity: Equipped Fabric Upholstery: Equipped Digital Odometer: Equipped Tach Meter: Equipped Electronic Multi Tripmeter: Equipped Engine Immobilizer: Equipped Smart Access Card Entry: Equipped Anti-theft Device: Equipped Medical Supplies Specifically Needs To Be Included: 1. Dashboard Camera (night Vision) 2. X-type Collapsible Stretcher (ferno) 3. Spine Board With Bracket (sure Guard) 4. Oxygen Cylinder Tank (20lbs) W/ Therapy Set 5. Jump Off Kit W/ Content 6. Manual Resuscitator For Adults, Pediatric And Infant (my Blue O2) 7. Minor Surgical Kit (secheron) 8. Heavy Duty Flashlight 9. Heavy Duty Stethoscope 1 Pediatric And 1 For Adult ( Littmann Classic Iii) 10. Fire Extinguisher 11. Portable Oxygen Tank 5 Pounds 12. Folding Stretcher 13. Scoop Stretcher 14. Folding Stair Chair 15. Automated External Defibrillator W/ Monitor (zoll E-series) 16. Nebulizer (omron) 17. Portable Suction Machine (medx) 18. Aneroid Sphygmomanometer (baxter) 19. Non-contact Thermometer (omron) 20. Blood-glucose Meter W/ Strips (one Touch) 21. Laryngoscope (beurer) 22. Immobilization Devices 23. Sterile Delivery Kit 24. Digital Clock 25. Air Purifier (imarfler) 26. Garbage Container 27. Sharps Container 28. Ked 29. Spider Strap 30. Rigid Splint 31. Mandible Splint 32. Rechargeable Flash Light 33. Raptor Sheer Cutter Additional Specification And Scope Of Works: 1. Installation Of Non-porous Partition With 10mm Thick Of Acrylic Glass Sliding Window. 2. Installation Of Adequate And Stable Wall Wide Medical Cabinet. 3. Installation Of Overhead Grab Rail On The Ceiling Of The Top Of The Patient Stretcher. 4. Installation Of Overhead Grab Rail On The Ceiling Of The Crew Seats. 5. Installation Of (2) Two Overhead Lighting With Low Light Option, 6. Installation Of Storage And Holder For Medical Oxygen Tank, Fire-extinguisher, Automated External Defibrillator W/ Monitor, Portable Suction Machine, Spine-board. 7. Installation Of Emergency Led Top Light W/ Siren And Both Side And Rear Blinkers Including “public Address System” 8. Installation Of Adequate Doctor’s And Crew’s Seats W/ Seat Belts. 9. Installation Of 2000 Watts Power Source Thru Inverter From 12v Dc To 220v Ac. 10. Ambulance Logo, Font, Back And Side Text For Sticker Decal Requirements Based On Doh-standard. 11. Installation Of Marine Plywood Non-slip Matting, Coin Design. 12. Installation Of Reverse Back-up Camera. 13. Installation Of Iv Hook And Examining Tight Mounted On The Head Side Of The Patient. 14. Installation Of Bump Approach. 15. Installation Of Dashboard Blinker. 16. Installation Of 5 Convenient Outlets Ac 220 Volts. 17. Installation Of Intercom System. 18. Installation Of Window Curtain And Tint (medium). 19. Installation Of Canopy Exhaust Fan. 20. Installation Of External Canopy Led Bars On Both Sides, Front Grill And Back. (green And Red Light) With 3-years Lto Registration 1-year Gsis Comprehensive Insurance Coverage 3-year Warranty Or 150,000 Kms Whichever Comes First Basic Warranty Coverage Must Have Service Center Within Region X & Region Xi Must Be An Authorized Dealer Of The Brand Offered

Description: CATEGORY: Fab Belt for JCB 3DX Super , Element Filter 125 Micron for JCB 3DX Super , Cap Side Shift Stabilizer for JCB 3DX Super , Roof Moulding for JCB 3DX Super , Light Number Plate for JCB 3DX Super , Strut Gas Door for JCB 3DX Super , Nut Lock for JCB 3DX Super , Stud Ball for JCB 3DX Super , Catch Window Lock Back for JCB 3DX Super , Door Tinted Glass Lower for JCB 3DX Super , Latch Assembly inner right hand for JCB 3DX Super , Adhesive for JCB 3DX Super , Strap Check for JCB 3DX Super , Handle Assembly Side Window for JCB 3DX Super , Seat Operator for JCB 3DX Super , Fan Face for JCB 3DX Super , Bush for JCB 3DX Super , Bolt for JCB 3DX Super , Nut Lock 3 by 8 inch UNF for JCB 3DX Super , Pivot Pin for JCB 3DX Super , Liner Bearing for JCB 3DX Super , Nipple Grease for JCB 3DX Super , Bolt M 10x110 for JCB 3DX Super , Nut Lock M 10 for JCB 3DX Super , Pin Pivot for JCB 3DX Super , Seal Pivot Pin for JCB 3DX Super , Cover Battery for JCB 3DX Super , Mat Rubber for JCB 3DX Super , Cover Dust Battery for JCB 3DX Super , Arm wiper blade assembly for JCB 3DX Super , Throttle Hand Knob for JCB 3DX Super , Throttle Cable Assembly for JCB 3DX Super , Spring for JCB 3DX Super , Hose Union for JCB 3DX Super , Adaptor for JCB 3DX Super , Adaptor Tee for JCB 3DX Super , Tube Inner for JCB 3DX Super , Air Element Main for JCB 3DX Super , Air Element Safety for JCB 3DX Super , Plug Air Vent for JCB 3DX Super , Drain Valve Assembly for BD80 A12 Dozer , Cap Assembly for BD80 A12 Dozer , Knob for BD80 A12 Dozer , Hose for BD80 A12 Dozer , Tube Assy for BD80 A12 Dozer , Terminal for BD80 A12 Dozer , Cable Assembly for BD80 A12 Dozer , Lamp Assembly for BD80 A12 Dozer , Smart Alarm for BD80 A12 Dozer , Water Temp Gauge for BD80 A12 Dozer , TACHO Hours Mtr for BD80 A12 Dozer , Key for BD80 A12 Dozer , Cap for BD80 A12 Dozer , Stainer for BD80 A12 Dozer , Universal Join Assy for BD80 A12 Dozer , Screen for BD80 A12 Dozer , Band Assy for BD80 A12 Dozer , Gauge Oil for BD80 A12 Dozer , Magnet for BD80 A12 Dozer , Element Filter for BD80 A12 Dozer , Bolt Shoe for BD80 A12 Dozer , Nut Shoe for BD80 A12 Dozer , PIN Master for BD80 A12 Dozer , Rest Arm for BD80 A12 Dozer , Seat Assembly for BD80 A12 Dozer , Bolt Joint for BD80 A12 Dozer , Swatch Starting for BD80 A12 Dozer

Details: Description Itb No.108.24- 1 Lot Supply Of Liquefied Petroleum Gas (lpg) Including Installation Of 6 Units 250 Kgs Cylinder Tank With Total Volume Of 1,500 Kgs For The Period Of One (1) Year (january 01-december 31, 2025 Project Description Supply Of Liquefied Petroleum Gas (lpg) Including Installation Of 6 Units- 250 Kilograms Cylinder With A Total Volume Of 1,500 Kgs. Projected Volume- 29,700 Kilograms Annual Budget Ceiling: Php 2,524,500.00 Price Per Kilogram- Php 85.00 Period Of Contract And Delivery- January 1, 2025- December 31, 2025 Scope Of Works Equipment And Installation- The Supplier Shall Install Equipment With No Cost At Phc’s Premises To Be Used Only For Storing, Handling And Dispensing Lpg Purchased From The Supplier: Product Quality- Lpg Supply Shall Meet Marketing Specifications Under Bureau Of Philippine Standards. Supplier Shall Provide Test And Quality Inspection Certificate During Deliveries. Density Shall Be 0.525 To 0.55 @ 15 Deg C. Deliveries- Shall Be Made By Truck. Supplier Shall Provide Calibration Certificate For Its Metering Device. Delivery Receipts Signed/acknowledged By Phc Or Its Authorized Representatives Shall Be Sufficient Proof Of Delivery. Compliance And Permitry- The Supplier Shall Apply For The Necessary Permit. Product Quality- Lpg Supply Shall Meet Marketing Specifications Under Bureau Of Philippine Standards Technical Service- The Supplier Shall Provide As Part Of Their Offer The Following Services Free Of Charge: Engineering Audit Of The Lpg Facility- Inspection To Be Facilitated For Any Repairs And Improvement Needed On The Lpg Tank Farm. Semi-annual Preventive Maintenance Of Lpg Facility-to Ensure The Lpg Tank Facility Is In Good Condition. Emergency Call-24/7- Provide A Special Service In Case Phc Experience Unsafe Conditions On Their Lpg Facility. Annual Comprehensive Leak Testing From Lpg Facility And Pipelines Going To The Equipment. Lpg Safety Trainings And Seminars- Lpg Product Knowledge, Safety And Training And Emergency Response On Lpg Leaks. Tank Requalification Shall Be Provided If The Due Date Falls During The Contract Period. Repairs And Assistance Shall Be Provided For Any Findings Related To Lpg Facility. Safety Audit On Lpg Tank Facility And Lpg Piping System And Equipment And Come Up With A Recommendation Fitted Compliant With The Code. Dismantle Any Obstruction Prior To Installation Works. Installation Of The Following Brandnew Equipment And Accessories (based On The 2019 Revised Fire Code Of The Philippines Standards) Description Specifications 1. 120 Ag Lpg Tank With Overfill Protection Device (made In Mexico, U.s. Or Equivalent) Brandnew 250 Kgs. Capacity 2. Central Panel (made In Italy, U.s. Or Equivalent) Power Supply: 230vca 50-60hz Absorption: 10 Va Alarm Level: 10-20% L.e.l 3. Siren (made In Italy, U.s. Or Equivalent) Power Supply: 230vca 50-60hz/12v Absorption: 15va Sound Intensity: 115db 4. Explosion Proof Gas Leak Detector (made In Italy, U.s. Or Equivalent) Power Supply: 12vdc Absorption: 1w Output: 4-20ma Measuring Range: 0-20% L.e.l Sensor: Catalyctic 5. Ball Valve (made In Italy, U.s. Or Equivalent) Csa-ul-fm Certified 6. High Pressure (hp) Regulator (made In Italy, U.s. Or Equivalent) Capacity: 10,700,000 Btu/hr Outlet Pressure Range: 5-20 Psig 7. Automatic Solenoid Shut Off Valve N.o. (made In Italy, U.s. Or Equivalent) Power Supply: 230vca 50-60hz Closing Time: Less Than 1 Sec Max Pressure: 550 Mbar/ 6 Bar 8. Installation Of Lpg Pipe Line From Lpg Tank Farm Up To Tapping Point Connection 9. Installation Of Required Signage

Description: CATEGORY: EWC with Low level flushing , Geyser of 15 ltrs capacity , CP Angle Valve 15 mm for geyser , 15 Amp three plug top , CPVC Pipe 20 mm for geyser , PVC waste pipe 32mm dia for wash hand basin , Switch Socket combination 15 Amp with gang box , 10 mm dia TMT bar , MS Binding wire , Self tapping screw 2 inch , Self tapping screw 1 inch , Black screw 1 inch , Tower bolt 4 inch , Steel Aldrop 300 mm , Nut and Bolt 08 x 75 mm , Water staging top plate of size 1000 x 1000 mm with 2 mm thick MS sheet , One vitreous china squatting pan , Female thread elbow 20 mm , Female thread socket 20 mm , PVC Elbow 110mm , PVC P Trap 110mm , PVC or CPVC Solvent , Sockage pit cover of size 2000 x 3000 mm , PVC 110 mm Cowl , Peg Stay with four pegs of ISI marked , PVC U Clip 20 mm ISI Marked , CP Grating doom 100 mm dia , CPVC 20 mm Union , CPVC 20 mm Socket , CPVC 20 mm Tee , CPVC 20 mm Elbow , PVC Pipe 110mm , PVC Socket 110mm , PVC Tee 110mm , LED Tube Light of 20 W , Switch Socket combination 5 Amp with gang box , PVC Ceiling Rose , PVC square box , Switch Piano Type 5 Amp , PVC switch board of size 300mm x 250mm with laminated sheet , Insulation tape 19mm wide , PVC capping casing 32mm 3 Mtrs long , Black screw , PVC insulated and unsheathed multistranded cable of copper conductor , PVC insulated and unsheathed multistranded cable of copper conductor of size 1 sq mm , PVC insulated and unsheathed multistranded cable of copper conductor of size 2 pt 5 sq mm , MCB Distribution Box 6 Ways , MCB 32 Amp DP , MCB 16 Amp SP , Main switch 32 AMP , Wall mounting fan of 450 mm with pull cord control for speed , PVC insulated and sheathed cable of aluminium conductor of size 16 Sqmm 2 core , Angle Holder , LED Bulb 18 Watt , Almn Pop Rivets 2 inch long , LED panel ceiling light 2 ft x2 ft , PBS Roll 15 Mtrs long , Luke for PBS Roll , Flashing Tape 100 mm width and 10 Mtrs long in each roll , Paint OG Colour , Paint Dark Brown Colour , Paint Black Colour , Paint Sand Colour , Vetrified floor tiles of size 600x600x10mm thick , White Cement , LED Tube Light of 36 W 4 ft long with fitting , Ceiling fan 1200 sweep with fan hooks and fan regulator , Paint Green Colour , Thinner , Distemper , Yellow Stainer , Paint Brush 150 mm , Paint Brush 100 mm , Puff panel of size 3000 x 1000 mm and 40 mm thick , Puff panel Door of size 900 x 2100 mm and 40 mm thick of panel with almn choukhat and all complete fittings , PVC Door 3 x 7 feet alongwith suitable fixing arrangement , Mini Fan Regulator or Speed controller 100w , MCB 32 Amp SP , MCB 40 Amp DP , Window Glass of size 600 x 600 mm 5mm , Cement board panel of size 4 x 2 ft