Valve Tenders

Details: Description Supply And Delivery Of Atomic Absoption Spectrophotometer (aas) And Total Organic Carbon/ Particulate Organic Carbon Analyzer (toc/poc) Atomic Absorption Spectrophotometer (aas) With Complete Accessories Aas Main Unit Optics Wavelength Range: At Least 185 - 900nm Monochromator: Aberation-corrected Czerny-turner Mounting Or Equivalent Number Of Grating Grooves: At Least 1800 Lines/mm Focal Length: At Least 300 Mm Grating Area: At Least 40 X 40 Mm Bandwidth: 0.2, 0.7, 1.3, 2.0l Nm (4-step Automatic Switching) Or Better Detector: Photomultiplier Tube Optics: Double Beam Background Correction: Self-reversal And Dueterium Or Equivalent Number Of Hollow Cathode Lamps: 6-lamp Turrent Or Better, And Capable Of 2 Lamps Simultaneously Lit (1 For Measurement And 1 For Warming Up For Next Measurement) Graphite Furnace Analyzer Heating Temperature Range: Ambient To At Least 3,000oc Setting Heating Condition: Maximum 20 Stages Heating Mode: Ramp Or Step Inner Gas Type: Dual Automatic Switching Type Or Equivalent Inner Gas Flow Rate: At Least 0 To 1.5 L/min With Cooling Water Flow Rate Monitor With Gas Pressure Monitor With Overcurrent Protection Unit With Furnace Block Cooling Check Flame Type: Air-cooled Premix Type Or Equivalent Burner Head: Titanium 10 Cm Slot Or Equivalent Nebulizer: Pt-ir Capillary, Ptfe Orifice, Ceramic Impact (capable Of Handling Hydrofluoric Acid) Or Equivalent Chamber: Engineering Plastic Or Equivalent Burner Atomizer: Manual Adjustment For Lateral Or Vertical, Automatic Position For Burner Height Angle Adjusment: Adjustable Burner Angle From 0 To 90o Type: Air-acetylene Flame And Nitrous Oxide-acetylene Flame Flow Rate Control: Automatic Fuel Gas Flow Rate Setting Of (0.1l/min Step) And Automatic Search Of Optimum Gas Flow Rate With Automatic Fuel Gas Leak Detector With Prevention Of Wrong Burner Head Use With Drain Tank Level Monitor With Flame Monitor With Gas Pressure Monitor With Automatic Flame Extinction Upon Power Outrage Or Sudden Power Interruption With Automatic Flame Extinction Via Vibration Sensor With Internal Fan Stop Sensor Autosampler Function: Capable To Perform Zero-point Calibration, Auto Diagnosis, Auto Rinse, Auto Mixing, And Random Access Compatibility: Flame And Furnace Measurement Sample Vial: At Least 2 Ml Reagent Vial: At Least 20 Ml Nozzle Rinse: Solvent Rinse Discharge Method Sampling Function: Dilution Function, Reagent Addition Function Syringe: At Least 250 Microliter Injection Volume: At Least 2 To 90 Microliter Repeatability: 1% Rsd For 20 Microliter Position: Minimum Of 8 Positions For Reagent And 60 Positions For Sample Software Can Perform Extrapolation Of Calibration Curve Range. If The Sample Concentration Exceeds The Calibration Curve, Additional Measurements Can Be Performed On Standard Solutions To Re-calculate The Concentration Real-time Drying And Ashing Progress Display During Furnace Measurement Capable To Set-up Sample Dilution And Spike-and-recovery Test With Overlay Function For Size And Shape Comparison Of Peak Profiles Training On The Use, Care And Maintenance Of The Equipment Other Accessories A. Complete Pc System Specification: Processor: Core I7-12700 (2.1ghz) Memory: 8gb Ddr4 3200 Storage: 1tb+256gb Ssd Display: 23.8" Ka242y (f02aka242y) Operating System: Win 11 Graphics Card: Gt1030 2gb Software: Office H&s Connectivity: Wifi/ Bt With Wireless Keyboard And Mouse B. Printer Specification: Resolution: At Least 720 X 720 Dpi Print Speed: Up To 9.0 Ipm For Black And 4.8 Ipm For Color Paper Feed Method: Friction Feed Number Of Paper Trays: 1 Paper Hold Capacity: Up To 50 Sheets Of Plain Paper (75gsm) Paper Size: A4, Letter, And Legal Interface: 2.0 Usb With 1 Set Of Refill (black, Cyan, Magenta, And Yellow Ink Bottle) C. One Set Of Standards (500 Ml) Mercury, Copper, Lead, Manganese, Cadmium, And Arsenic D. Hollow Cathode Lamp Mercury, Copper, Lead, Manganese, Cadmium, And Arsenic E. Regulator Acetylene And Argon F. Gas Cylinder, Uhp 1 Cylinder Acetylene Gas 3 Cylinders Argon Gas G. Water Circulator Circulation Method: Closed Loop Circulation Temperature Setting Range: At Least -20 To 30oc Temperature Control Accuracy: ± 2oc Or Better Pump Max Flow: 12 - 14 L/min Temperature Control: Refrigerator On-off Control Temperature Display: Digital Display Coolant: R407c Or Equivalent Cooling Capacity: At Least 1200w At Liquid Temperature 10oc H. Air Compressor During Flame Analysis Note: Warranty: Five (5) Year On Parts, Calibration, Service, Andpreventive Maintenance Service With Pm Kits Place Of Delivery - Nfrdi Quezon City Delivery Period: 30 To 45 Days Upon Receipt Of Ntp "total Organic Carbon / Particulate Organic Carbon System" Measurement Method: 680°c Combustion Catalytic Oxidation – Non Dispersive Infrared Detection (ndir) Method Operation Method: Pc Controlled Toc "measured Items: Tc, Ic, Toc (=tc-ic), Npoc (non-purgeable Organic Carbon, Toc Measurement Via Acidification And Sparging)" Applicable Samples: Aqueous Sample (optional Solid/gas Samples) Measurement Range: Tc: 0 To 30,000 Mg/l; Ic: 0 To 35,000 Mg/l (option); Tn: 0 To 10,000 Mg/l; Poc: 0 To 500 Mg/l Detection Limit: Tc, Ic: 4 Μg/l, Tn: 5 Μg/l Reproducibility: Tc, Ic, Npoc: Cv 1.5 % Max. Or ±4 Μg/l Max Measuring Time: Tc : Approx. 3 Mins; Ic : Approx. 3 Mins Sample Injection: Automatic Injection Using A Syringe Pump And Slide Type Injection Mechanism Sample Injection Volume: 10 To 2,000 Μl Variable Ic Removal: Automatic Addition Of Acid And Sparging Sample Dilution: Dilution Rate Of 2x To 50x (automatic Sample Dilution By Syringe Pump); Dilution Accuracy: ±2 % Max. (2x To 20x); ±5 % Max. (21x To 50x) "display And Operations: Operation By Color Lcd Screen And Keyboard" "carrier Gas: High-purity Air (co, Co2, Hc Content: Each 1 Ppm Max., Dew Point: -50 °c Max.); Supply Pressure: 200±10 Kpa (additional Use Of Optional Carrier Gas Regulator: 300 To 600 Kpa)" Gas Consumption: 150 Ml/min (230 To 250 Ml/min During Sparging) (variable Flow Rate) Power Supply: 100 To 240 V Ac, 600 Va Ambient Temp Range: 5 To 35°c Dimensions: W340 X D660 X H480 Mm Weight: Approx. 35 Kg "asi-l Autosampler: 24 Ml Vials, Capacity: 24 Ml X 93 Samples Can Be Added During Continuous Measurement. Includes: 100 Pcs Of 24ml Vials With Cap And Septum, 2sets Magnetic Stirrer With Stir Bars" Inclusive Of: "complete Standard Accessories/ Consumables (as Spare): Halogen Scrubber Carbon Dioxide Absorber Combustion Tube Standard Catalyst Quartz Wool (1g)" Toc-l Software "complete Computer Set (dell Desktop) Intel Core I5, Windows 10 Pro, 16gb Ram, 1tb Hdd + 256gb Ssd" Printer (epson Or Hp Continuous Colored Ink Printer) Microsoft Office With License Complete Gas Line Installation For Air (with Regulator, On/off Valve) Avr, 3 Kva 1 Tank Of Synthetic Air (for Initial Use) Suspended Sample Kit For Toc And Autosampler, 2 Pcs. Each High-salt Sample Combustion Kit High Suspension Kit Standard, Potassium Hydrogen Phthalate (khp) "solid Sample Combustion Unit Capable Of Toc And Poc Measurements In Solid Samples Tc Oxidation Method: Combustion Catalytic Oxidation (tc Furnace Temperature: 900 °c) Maximum Sample Amount: 1 G Carrier Gas: 99.9 % O2 At 500 Ml/min Features: Measurement Of Maximum 1 G Samples With Up To30 Mg Carbon Content Reduces Weighing Errors, And Errors Due To Uneven Distribution Of The Sample Carbon Content. Measurement Of Inorganic Carbon (carbonate) In Solid Samples. Measurement Of Aqueous Samples Containing Large Quantities Of Suspended Substances. " "tnm-l Tn (total Nitrogen) Unit Measurement Method: Chemiluminescence Measured Items: Tn (total Nitrogen) Measurement Range: 0 To 10,000 Mg/l Detection Limit: 5μg/l (cph, Csn) Reproducibility: Cv 3 % Max. Measuring Time: Approx 4 Min" Synthetic Air Generator (as Alternative From Using Synthetic Air Tank) "warranty: One (1) Year On Parts Five (5) Years Preventive Maintenance Service And Pm Kit (once A Year For 5 Years)" "training: 1. Includes On-site Training On Basic Instrument Principles, Operation, Maintenance, And Troubleshooting By Chemist/engineers Of The Company 2. Includes Follow-up Trainings And Assistance On The Operation. 3. Training On Toc Principles, Operation, Maintenance And Troubleshooting For Two (2) Pax." Note: Warranty: Five (5) Year On Parts, Calibration, Service, Andpreventive Maintenance Service With Pm Kits Place Of Delivery - Ffrdc, Butong, Taal, Batangas Delivery Period: 45 Days Upon Receipt Of Ntp

Details: Description The Dr. Jose Fabella Memorial Hospital Hereby Invites Interested Suppliers To Submit Quotation For The Supply And Delivery Of: Particular Qty. Unit Cost Total Cost Cold Packs 5 Pcs ₱1,000.00 ₱5,000.00 • Reusable Cold Gel Pack • Durable Construction Resistant To Puncture • Standard Size Gel Pack 27cm X 16.5cm Parafin Wax Container 1 Set 20,000.00 20,000.00 • 6 Lb (4 Liter) Container With Oversized Tank Accommodates A Man Size 12 ½ Foot • Lightweight And Portable • Operating Temperature 125-134°f, 110 V • Kit Includes Container, Washable Terry Cloth And Mitt And • Bottie, 65 Hand/foot Plastic Liners And (6) 1lb Wax Blocks Portable Infrared Radiation Lamp 1 Pc 15,000.00 15,000.00 • Deep Focused Infrared Warmth With 150w • Adjustable Angle That Can Be Positioned Up To 40 Degrees Backward • Have An On And Off Switch At The Back Of Infrared Lamp • Has A Cord Storage Holder At The Back Of The Appliance • Cord Length: 180cm; Voltage: 220 Or 250v • Insulation: Class Ii (double Isolation) • Frequency: 50hz • Type Of Lamps: Par 38e, 150w + Prismatic Rings For More Focus • Dimension: 22cm H X 13cm W X 18.5cm D • A Box Dimension: 24cm H X 28.8cm W X 62.4cm D • Product Weight: 1 Kg; F-box Weight 1 Kg • F-box Dimension: 22.5cm H X 14cm W X 20.4cm D • A-box Weight: 6.4kg • Iec Certified: Complies To Iec 60335 Wall Standing Mirrors 1 Pc 4,500.00 4,500.00 • 34.4 Cm W X 1.6 Cm D X 154.4 Cm • Any Color • 28 Mm Thick, Polystyrene Plastic Frame With 3 Mm Thick, Normal Mirror And 3mm Thick Mdf Back Board Stretchable Resistance Band • Light (green): 600mm X 50mm X 0.35mm (5-10lbs) 1 Roll 5,000.00 5,000.00 • Medium (blue): 600mm X 50mm X 0.50mm (10-20lbs) 1 Roll 5,000.00 5,000.00 • Heavy (yellow): 600mm X 50mm X 0.70mm (20-30lbs) 1 Roll 7,000.00 7,000.00 • Extra Heavy: 600mm X 50mm X 1.10mm (40-48lbs) 1 Roll 9,000.00 9,000.00 Stretchable Resistance Tube • High Quality Latex Band Pre-formed Into A Loop • Material: Thermoplastic Elastomer • Resistance Tube Features A Double Layer Of Rubber At The Ends For Comfortable Grip • Resistance Tube Length: 140cm • Handle Width: 11cm Light 1 Pc 5,000.00 5,000.00 Medium 1 Pc 7,000.00 7,000.00 Heavy 1 Pc 9,000.00 9,000.00 Pulse Oximeter 1 Pc 3,000.00 3,000.00 • Monochrome Led Display • Measurement Accuracy: +2% Within The Range Of 70%-99% • Measurement Value <70% Accuracy • Charging Method: Usb Type C • Aa Battery • Power Consumption: Less Than 20mah • Usage: With Bottom, Automatic Testing • Automatic Shutdown: Finger Disengagement • Lightweight, Small, Easy To Use And Convenient To Carry Dumbells • Made Of Iron Material Covered With Neoprene • Hex Shaped Heads Design • Weights: 1 Lb 1 Pair 1,000.00 1,000.00 2 Lbs 1 Pair 1,300.00 1,300.00 3 Lbs 1 Pair 1,500.00 1,500.00 4 Lbs 1 Pair 1,700.00 1,700.00 5 Lbs 1 Pair 2,000.00 2,000.00 Ankle Weights • Made Of Oxford Cloth Materials Filled With Iron Sand • With 2 Velcro Straps On Both Sides With Heavy Duty Nylon And Adjustable Straps That Fits On The Ankle • Weights: 0.5kg 1 Pair 1,500.00 1,500.00 1 Kg 1 Pair 1,800.00 1,800.00 2 Kg 1 Pair 2,300.00 2,300.00 3kg 1 Pair 2,500.00 2,500.00 4kg 1 Pair 3,000.00 3,000.00 Inflatable Vestibular Ball 2 Pcs 5,000.00 10,000.00 • 75 Cm / 29.5-inch Size • Bearing Capacity Support Up To 330 Lbs • 3 Mm Thickened Abs Ball (anti-burst System) • Free Of Bpa And Heavy Metals • Assorted Color • With Foot Pump Included Inflatable Rubber Ball For Kids 2 Pcs 5,000.00 10,000.00 • Mini Inflatable Ball With Design For Kids • Small Flexible Enough To Grasp With One Hand Yet Big Enough To Hold With 2 Hands • Bouncy, Thick, Durable Pimpled Rubber • Nontoxic, Harmless Plastic • Diameter Approx.: 5–6-inch Diameter Wobble Board 1 Pc 6,000.00 6,000.00 • Made Of Molded Plastic With A Specially Designed Tactile Surface On The Top And Anti-skid Surface On The Bottom • 40cm L X 10cm H • 20mm Palm Touch With Surface Non-slip Sandpaper Handle Design Both Sides For Easy Gripping • With Curve Button Support In 360 Degrees Direction • Weight Limit For Each Board Is 300 Lbs. Yoga Mat 2 Pcs 5,000.00 10,000.00 • Lightweight And Durable Yet Cushioned And Strong • Washable And Easy To Clean • Size: 68 In L X 24 In W Rubber Mat Flooring / Play Mat For Kids 5 Packs 10,000.00 50,000.00 • Puzzle Interlocking • Made From Soft And Durable High-quality Foam • Epe Non-toxic Material • Feature: Anti-slip, Shock Absorbing And Soft • Dimension: 60 Cm By 60cm • Bright With Different Color Puzzle Mats • Lightweight And Easy To Install And Detach • 4 Pieces Per Pack Kinesiology Tape 5 Pcs 4,000.00 20,000.00 • 2 Inches Width • Sweat Resistant And Water Resistant And Air Permeable Allowing It To Be Worn For Days • Can Be Stretch By 30-40% • Assorted Color • Materials: Cotton, Spandex, Acrylic • Pressure Sensitive Adhesive, Hypoallergenic Hole Peg Board 1 Set 3,000.00 3,000.00 • Stacking Peg Board Set Includes 100 Pegs Of 10 Different Colors And One Board • Natural Solid Rubber-wood, Non-toxic, Smooth Finish, Coated With Soft Child Safe Water-based Paints • Sizes: Chess Board 8.5 Cm X 8.5cm X 3.35 Cm • Peg Height: 2 Cm Hand Grip Exerciser 1 Pc 2,000.00 2,000.00 • Metal Exerciser With Soft Eva Grips • Grip Tension Rating Of 33 Lbs • Product Size: 3.5 In W X 5 In H X 1 In D Finger Strengthener Exerciser • Trumpet Format • Size: 3.5 In X 5 In X 1 In • Material: Abs Composite Material • Latex Free Trp Grip • Steel Spring Component Light 1 Pc 2,000.00 2,000.00 Medium 1 Pc 2,200.00 2,200.00 Bp Apparatus And Stethoscope 1 Pc 25,000.00 25,000.00 • Mercury-free Sphygmomanometer • Adjustable Height And Position • Pressure Range: 0-300 Mmhg • Calibrated • Wheel Stand, With 5 Casters • With Lockable And Static Feature • With Complete Accessories: Nylon Velcro Cuff With Different Sizes (33-47 Cm For Obese Adult, 25-35cm For Regular Adult, 18-26cm For Child, 12-19cm For Infant And 6-11cm For Newborn, Inflator Valve, Air Control Bulb • Basket (attached To The Stand) For The Accessories • At Least 1 Year Warranty On Service And Parts Bicycle Ergometer 1 Pc 47,000.00 47,000.00 • For Upper And Lower Extremities • Foldable Bike Ergo Exerciser Used In Arms And Legs • With Anti-slip Pedal And Non-slip Bike Foot And Adjustable Resistance Gauge • With Or Without Lcd • Materials Used: Abs Pp Steel • Size: 48.5 Cm X 36 Cm X 33 Cm • Maximum Load Capacity: 100 Kg Product Weight Approx.: 2.4 Kgs Total ₱300,300.00 Quotation Must Be Submitted To The Bac Secretariat Office, New Dr. Jose Fabella Memorial Hospital, Tayuman St., Manila On Or Before January 7, 2025. To Submit Together With Quotation The Following Documents: 1. Philgeps Registration Certificate 2. Mayors Permit 3. Omnibus Sworn Statement For Details, Please Contact The Bac Secretariat At Bacfabella@yahoo.com / Fabella.procurement @ Gmail.com (tel. No. 88 66 7960 - 74). The Djfmh Reserves The Right To Accept Or Reject Any Or All Quotation, To Waive Any Defects Found Therein And To Accept Such Quotations As May Be Consider Advantageous To The Government. The Djfmh-bac Assumes No Obligation To Compensate Or Indemnify The Bidders For Any Expenses Or Losses That Maybe Incurred In The Preparation Of Quotations Nor Does It Guarantee That An Award Will Be Made. Maria Lu D. Andal, Md Chair, Bids And Awards Committee For Infrastructure, Goods Non-medical, Consulting Services, Non-medical Equipment, Services

Details: Description Quantity Unit Of Issue Item Description Stock No. General Requirements 3 Lot Mobilization/ Temporary Structures, Utilities And Services/demobilization/standard Billboard/material Testing 3 Lot Safety And Health 3 Lot Hauling Cost Sub-total Two Seater Toilet Earthworks 1.00 28.17 Sq.m Clearing And Grubbing 1.01 11.16 Cu.m Structural Excavation 1.02 11.1 Cu.m Backfilling And Compaction 1.03 2.01 Cu.m Gravel Bedding G-1 1.04 2.82 Cu.m Select Fill 1.06 28.17 Sq.m Soil Poisoning 1.05 Sub-total Concreting Works 2.00 7.17 Cu.m Wall Footing 66 Bag Portland Cement 2.01 7.5 Cu.m Crushed Gravel 1" 2.05 3.75 Cu.m Washed Sand 2.03 2.1 Cu.m Column 21 Bag Portland Cement 2.01 2.25 Cu.m Crushed Gravel 3/4" 2.02 1.5 Cu.m Washed Sand 2.03 1.08 Cu.m Beams 12 Bag Portland Cement 2.01 1.5 Cu.m Crushed Gravel 3/4" 2.02 0.75 Cu.m Washed Sand 2.03 2.85 Cu.m Slab On Grade 27 Bag Portland Cement 2.01 3 Cu.m Crushed Gravel 1" 2.05 1.5 Cu.m Washed Sand 2.03 0.51 Cu.m Handwashing 6 Bag Portland Cement 2.01 0.75 Cu.m Crushed Gravel 3/4" 2.02 0.75 Cu.m Washed Sand 2.03 Sub-total Rebar Works 3.00 268.5 Kg Wall Footing 301.29 Kg Column 120.42 Kg Beam 108.81 Kg Slab On Grade 19.83 Kg Handwashing 818.82 Kg Deformed Round Bars, Grade 40 3.01 18 Kg G.i. Tie Wire 3.02 Sub-total Formworks 4.00 41.76 Sq.m Column 213.3 Bd.ft Coco Lumber 4.01 6 Pc Plywood Ordinary, 1/4" X 4' X 8' 4.02 3 Kg Cwn, Assorted 4.04 9.99 Sq.m Beams 51.3 Bd.ft Coco Lumber 4.01 3 Pc Plywood Ordinary, 1/4" X 4' X 8' 4.02 3 Kg Cwn, Assorted 4.04 5.16 Sq.m Handwashing 27 Bd.ft Coco Lumber 4.01 3 Pc Plywood Ordinary, 1/4" X 4' X 8' 4.02 3 Kg Cwn, Assorted 4.04 Sub-total Masonry Works 5.00 72.33 Sq.m Masonry Wall 906 Pc Chb 6" Thk 5.05 24 Bag Portland Cement 5.02 6 Cu.m Washed Sand 5.03 96 Kg 10mm X 6m Rsb 5.06 3 Kg G.i. Tie Wire 5.07 144.63 Sq.m Plastering 45 Bag Portland Cement 5.02 6 Cu.m Washed Sand 5.03 Sub-total Doors And Windows 6.00 D-3 Flush Door 0.70 X 2.10 On 150 Mm 6 Set Wooden Jamb Complete With Accessories 6.05 Sub-total Steel Works 7.00 272.13 Kg Lc 75 X 38 X 15 X 2.0mm 7.03 27.9 Kg L 50 X 50 X 6mm 7.14 6 Pc B.i. Pipe 75mmø Sch 40 7.37 6 Pc Tubular 50mm X 100mm X 1.5mm 7.29 15 Pc 50mm X 75mm X 1.2mm Tubular Pipe 6 Kg D12mm Rsb (grade 40) 0.45 Pc Steel Plate 1.20m X 2.40m X 6mm 7.27 12 Pc Anchor Bolt With Nuts And Washers, 12mmø X 50mm X 300mm 7.34 24 Pc Anchor Bolt With Nuts And Washers, 16mmø X 100mm 7.33 159 Pc 10mmø Bolt With Nuts And Washers 7.35 9 Kg Welding Rod 7.46 Sub-total Roofing Works 8.00 25.65 M Long-span Roofing, Corrugated, Pre-painted, 220mm X 0.4mm Thk 8.16 6 Pc Flashing Ga 26, 24"x28' 8.13 207 Pc Teckscrew 2-1/2" 8.35 6 L Roof Sealant 8.36 19.89 Sq.m Polycarbonate Sheets Twin Wall 6mm Thick Including Accessories 8.16 Sub-total Carpentry Works 9.00 19.05 Sq.m Ceiling 84 Bd.ft Rough Lumber, Sun Dried, Tanguile 9.13 9 Pc Plywood, Marine 1/4" X 4' X 8' 9.06 3 Kg Finishing Nails 9.22 3 Kg Common Wire Nails 9.23 12 Pc Fascia Board, Fiber Cement 10" X 12" 9.19 3 Pc Ceiling Vent 1" X 12" X 4' With Screen 9.15 Sub-total Electrical Works 10.00 Roughing-ins 15 Pc Electrical Conduit Upvc, 15mmø 10.01 3 Pc Junction Box, 4" X 4" G.i. 10.16 6 Pc Utility Box, 2" X 4" G.i. 10.17 0 Wires & Fixtures 144 M 3.5 Mm2 Thw Wire, Stranded 10.11 9 Pc Single Switch With Plate 10.23 9 Pc Ceiling Receptacle 3-1/2"ø 10.33 9 Set Incandescent Bulb 50w 10.53 3 Pc Electrical Tape 10.58 Sub-total Plumbing Works 11.00 6 Set Water Closet 1.6gpf With Accessories 11.62 6 Set Water Closet Flange 11.61 9 Pc Faucet, Plain Bibb, Brass 1/2"ø 11.59 15 Pc S.s Floor Drain 4' X 4" 11.65 3 Set S.s Grab Rail 1-1/2"ø 11.68 3 Pc Gate Valve, 1/2"ø 11.44 15 Pc Pp-r Pipe 1/2"ø 11.06 15 Pc Pp-r Elbow 90o X 1/2"ø 11.21 9 Pc Pp-r Tee, 1/2"ø 11.15 3 Pc Pp-r Coupting Reducer, 1/2" X 3/4" Ø 11.24 15 Pc Pp-r Adaptor Female Thread 1/2"ø 11.77 3 Roll Teflon Tape 11.66 Sub-total Sanitary Works 12.00 6 Pc Upvc Sanitary Pipe 4"ø 12.09 15 Pc Upvc Sanitary Pipe 2"ø 12.07 9 Pc Upvc Elbow 90o X 2"ø 12.11 9 Pc Upvc Tee 2" X 2" 12.17 9 Pc Upvc Elbow 90o X 4"ø 12.13 15 Pc Upvc P-trap 2" 12.30 3 Can Brass Cleanout 4" X 4" 12.28 3 Lot Pvc Cement 12.33 3 Septic Vault (1.50 M X 2.00 M X 1.80 M) Sub-total Painting Works 13.00 102.33 Sq.m Concrete Surfaces 1.5 Gal Neutralizer 13.18 3 Gal Latex, Flat 13.01 3 Gal Latex, Semi Gloss 13.02 3 Qrt Acri Color 13.20 59.37 Sq.m Wood Surfaces 1.5 Gal Enamel, Flatwall 13.04 1.5 Gal Enamel, Semi Gloss 13.05 1.5 Gal Paint Thinner 13.16 Sub-total Tile Works 14.00 42.3 Sq.m Wall 1092 Pc Glazed Wall Tiles 20cm X 20 Cm 14.04 9 Bag Tile Adhesive 25 Kg/bag 14.16 12 Pc Tile Tnm 6mm 14.13 6 Bag Tile Grout 5 Kg/bag 14.15 11.25 Sq.m Flooring 291 Pc Unglazed Floor Tiles 20cm X 20cm 14.01 3 Bag Tile Adhesive 25 Kg/bag 14.16 3 Bag Tile Grout 5kg/bag 14.15 7.5 Sq.m Handwashing 195 Pc Unglazed Floor Tiles 20cm X 20cm 14.01 3 Bag Tile Adhesive 25 Kg/bag 14.16 3 Bag Tile Grout 5kg/bag 14.15 Sub-total

Description: File Number: W8476-256986/a Notice Of Proposed Procurement The Department Of National Defence Has A Requirement For The Items Detailed Below. The Delivery Is Requested At 25cfsd Montreal And 7cfsd Edmonton By March 4th , 2025. Item 1, Gsin: 5325, Nsn: 5325 33 205 9306 Ring, Retaining P/n Requested: 2004780 Nscm/cage: 0848b Quantity: 30 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 2, Gsin: 5325, Nsn: 5325 33 205 9306 Ring, Retaining P/n Requested: 2004780 Nscm/cage: 0848b Quantity: 30 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 3, Gsin: 5360, Nsn: 5360 33 202 1304 Spring, Helical, Extension P/n Requested: 2007800 Nscm/cage / Cof/cage: 0848b Quantity: 30 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 4, Gsin: 5360, Nsn: 5360 33 202 1304 Spring, Helical, Extension P/n Requested: 2007800 Nscm/cage / Cof/cage: 0848b Quantity: 30 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 5, Gsin: 5330, Nsn: 5330 12 175 2642 Seal Plain P/n Requested: Babsl60x80x7/7,5-72nbr/902 Nscm/cage / Cof/cage: D2480 Quantity: 15 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 6, Gsin: 5330, Nsn: 5330 12 175 2642 Seal Plain P/n Requested: Babsl60x80x7/7,5-72nbr/902 Nscm/cage / Cof/cage: D2480 Quantity: 15 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 7, Gsin: 3110, Nsn: 3110 12 164 8047 Bearing, Roller, Tapered P/n Requested: 32009-xa Nscm/cage / Cof/cage: D2456 Quantity: 20 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 8, Gsin: 3110, Nsn: 3110 12 164 8047 Bearing, Roller, Tapered P/n Requested: 32009-xa Nscm/cage / Cof/cage: D2456 Quantity: 20 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 9, Gsin: 2530, Nsn: 2530 99 780 7800 Steering Wheel P/n Requested: 294745-003 Nscm/cage / Cof/cage: U1607 Quantity: 2 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 10, Gsin: 2530, Nsn: 2530 99 780 7800 Steering Wheel P/n Requested: 294745-003 Nscm/cage / Cof/cage: U1607 Quantity: 2 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 11, Gsin: 4730, Nsn: 4730 12 395 7588 Elbow, Tube P/n Requested: Wee10lromdcf Nscm/cage / Cof/cage: D8134 Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 12, Gsin: 4730, Nsn: 4730 12 395 7588 Elbow, Tube P/n Requested: Wee10lromdcf Nscm/cage / Cof/cage: D8134 Quantity: 10 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 13, Gsin: 4730, Nsn: 4730 33 107 9371 Adapter, Straight, Tube To Boss P/n Requested: 4730700014 Nscm/cage / Cof/cage: 0125b Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 14, Gsin: 4730, Nsn: 4730 33 107 9371 Adapter, Straight, Tube To Boss P/n Requested: 4730700014 Nscm/cage / Cof/cage: 0125b Quantity: 10 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 15, Gsin: 5330, Nsn: 5330 33 218 0038 Gasket P/n Requested: 4065545 Nscm/cage / Cof/cage: 0848b Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 16, Gsin: 5330, Nsn: 5330 33 218 0038 Gasket P/n Requested: 4065545 Nscm/cage / Cof/cage: 0848b Quantity: 10 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 17, Gsin: 4730, Nsn: 4730 12 363 3125 Reducer, Tube P/n Requested: Red12/06zla3c Nscm/cage / Cof/cage: D8134 Quantity: 8 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 18, Gsin: 4730, Nsn: 4730 12 363 3125 Reducer, Tube P/n Requested: Red12/06zla3c Nscm/cage / Cof/cage: D8134 Quantity: 8 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 19, Gsin: 5330, Nsn: 5330 15 121 0511 Packing, Preformed P/n Requested: 5-612 N674-70 Nscm/cage / Cof/cage: A3958 Quantity: 25 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 20, Gsin: 5330, Nsn: 5330 15 121 0511 Packing, Preformed P/n Requested: 5-612 N674-70 Nscm/cage / Cof/cage: A3958 Quantity: 25 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 21, Gsin: 4730, Nsn: 4730 12 397 0740 Adapter, Straight, Tube To Boss P/n Requested: Ge12lr1/4cfx Nscm/cage / Cof/cage: D8134 Quantity: 12 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 22, Gsin: 4730, Nsn: 4730 12 397 0740 Adapter, Straight, Tube To Boss P/n Requested: Ge12lr1/4cfx Nscm/cage / Cof/cage: D8134 Quantity: 12 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 23, Gsin: 4820, Nsn: 4820 15 201 5924 Valve, Regulating, Fluid Pressure P/n Requested: Vcf35c B Viton Nscm/cage / Cof/cage: A4752 Quantity: 5 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 24, Gsin: 4820, Nsn: 4820 15 201 5924 Valve, Regulating, Fluid Pressure P/n Requested: Vcf35c B Viton Nscm/cage / Cof/cage: A4752 Quantity: 5 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 25, Gsin: 5930, Nsn: 5930 14 585 6465 Pedal Switch (foot) P/n Requested: Xpem110 Nscm/cage / Cof/cage: Fas02 Quantity: 5 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 26, Gsin: 5930, Nsn: 5930 14 585 6465 Pedal Switch (foot) P/n Requested: Xpem110 Nscm/cage / Cof/cage: Fas02 Quantity: 5 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 27, Gsin: 5930, Nsn: 5930 33 218 9773 Switch Thermostatic P/n Requested: 36030 Nscm/cage / Cof/cage: 1971b Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 28, Gsin: 5930, Nsn: 5930 33 218 9773 Switch Thermostatic P/n Requested: 36030 Nscm/cage / Cof/cage: 1971b Quantity: 10 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 29, Gsin: 5820, Nsn: 5820 37 545 1937 Control-converter P/n Requested: Ddr-30g-24 Nscm/cage / Cof/cage: S8116 Quantity: 5 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 30, Gsin: 5820, Nsn: 5820 37 545 1937 Control-converter P/n Requested: Ddr-30g-24 Nscm/cage / Cof/cage: S8116 Quantity: 5 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 31, Gsin: 5920, Nsn: 5920 33 219 4072 Fuse Holder Extractor Post P/n Requested: P.616 Nscm/cage / Cof/cage: 8816b Quantity: 2 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 32, Gsin: 5920, Nsn: 5920 33 219 4072 Fuse Holder Extractor Post P/n Requested: P.616 Nscm/cage / Cof/cage: 8816b Quantity: 2 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 33, Gsin: 1680, Nsn: 1680 01 669 8259 Lever, Control P/n Requested: 1007185 Nscm/cage / Cof/cage: 7k7f9 Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 34, Gsin: 1680, Nsn: 1680 01 669 8259 Lever, Control P/n Requested: 1007185 Nscm/cage / Cof/cage: 7k7f9 Quantity: 10 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 35, Gsin: 4730, Nsn: 4730 33 205 3376 Fitting, Lubrification P/n Requested: 2009319 Nscm/cage / Cof/cage: 0848b Quantity: 25 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 36, Gsin: 4730, Nsn: 4730 33 205 3376 Fitting, Lubrification P/n Requested: 2009319 Nscm/cage / Cof/cage: 0848b Quantity: 25 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 37, Gsin: 5306, Nsn: 5306 33 217 5746 Bolt, Internal Wrenching P/n Requested: 412396 16 Nscm/cage / Cof/cage: 551bb Quantity: 30 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 38, Gsin: 5306, Nsn: 5306 33 217 5746 Bolt, Internal Wrenching P/n Requested: 412396 16 Nscm/cage / Cof/cage: 551bb Quantity: 30 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 39, Gsin: 5325, Nsn: 5325 33 205 9306 Pin, Cotter P/n Requested: 0602254 Nscm/cage / Cof/cage: 0848b Quantity: 30 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 40, Gsin: 5325, Nsn: 5325 33 205 9306 Pin, Cotter P/n Requested: 0602254 Nscm/cage / Cof/cage: 0848b Quantity: 30 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 41, Gsin: 5305, Nsn: 5305 12 370 7996 Setscrew P/n Requested: Iso4026-m10x40-45h Nscm/cage / Cof/cage: I9008 Quantity: 30 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 42, Gsin: 5305, Nsn: 5305 12 370 7996 Setscrew P/n Requested: Iso4026-m10x40-45h Nscm/cage / Cof/cage: I9008 Quantity: 30 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 43, Gsin: 5310, Nsn: 5310 12 188 6493 Nut, Plain, Castellated, Hexagon P/n Requested: Din979-m24x1,5-05-znphrf Nscm/cage / Cof/cage: D8286 Quantity: 40 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 44, Gsin: 5310, Nsn: 5310 12 188 6493 Nut, Plain, Castellated, Hexagon P/n Requested: Din979-m24x1,5-05-znphrf Nscm/cage / Cof/cage: D8286 Quantity: 40 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 45, Gsin: 2530, Nsn: 2530 33 000 0734 Cap, Grease P/n Requested: 3499 Nscm/cage / Cof/cage: 1974b Quantity: 20 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 46, Gsin: 2530, Nsn: 2530 33 000 0734 Cap, Grease P/n Requested: 3499 Nscm/cage / Cof/cage: 1974b Quantity: 20 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 47, Gsin: 5310, Nsn: 5310 33 205 6966 Washer, Finishing P/n Requested: 0201969 Nscm/cage / Cof/cage: 0848b Quantity: 40 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 48, Gsin: 5310, Nsn: 5310 33 205 6966 Washer, Finishing P/n Requested: 0201969 Nscm/cage / Cof/cage: 0848b Quantity: 40 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 49, Gsin: 3120, Nsn: 3120 12 177 8991 Bearing, Washer, Thrust P/n Requested: Paw32p10 Nscm/cage / Cof/cage: D4871 Quantity: 20 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 50, Gsin: 3120, Nsn: 3120 12 177 8991 Bearing, Washer, Thrust P/n Requested: Paw32p10 Nscm/cage / Cof/cage: D4871 Quantity: 20 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 51, Gsin: 4320, Nsn: 4320 14 547 1429 Governor, Pump, Pressure Regulating P/n Requested: Olsa40152b0001 Nscm/cage / Cof/cage: F1606 Quantity: 5 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 52, Gsin: 4320, Nsn: 4320 14 547 1429 Governor, Pump, Pressure Regulating P/n Requested: Olsa40152b0001 Nscm/cage / Cof/cage: F1606 Quantity: 5 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 53, Gsin: 4730, Nsn: 4730 12 130 6681 Tee, Tube P/n Requested: T6l Nscm/cage / Cof/cage: D8134 Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 54, Gsin: 4730, Nsn: 4730 12 130 6681 Tee, Tube P/n Requested: T6l Nscm/cage / Cof/cage: D8134 Quantity: 10 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 55, Gsin: 4730, Nsn: 4730 12 185 2661 Tee Tube P/n Requested: Evl6l0md Nscm/cage / Cof/cage: D8134 Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 56, Gsin: 4730, Nsn: 4730 12 185 2661 Tee Tube P/n Requested: Evl6l0md Nscm/cage / Cof/cage: D8134 Quantity: 10 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 57, Gsin: 4730, Nsn: 4730 12 375 7616 Adapter, Straight, Tube To Boss P/n Requested: Ge10lredomdcf Nscm/cage / Cof/cage: D8134 Quantity: 25 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 58, Gsin: 4730, Nsn: 4730 12 375 7616 Adapter, Straight, Tube To Boss P/n Requested: Ge10lredomdcf Nscm/cage / Cof/cage: D8134 Quantity: 25 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 59, Gsin: 4730, Nsn: 4730 12 383 8749 Adapter, Straight, Tube To Boss P/n Requested: Ge06lredomdcf Nscm/cage / Cof/cage: D8134 Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 60, Gsin: 4730, Nsn: 4730 12 383 8749 Adapter, Straight, Tube To Boss P/n Requested: Ge06lredomdcf Nscm/cage / Cof/cage: D8134 Quantity: 10 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 61, Gsin: 4730, Nsn: 4730 01 692 0371 Tee, Tube P/n Requested: Wh10lromdcf Nscm/cage / Cof/cage: 30780 Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 62, Gsin: 4730, Nsn: 4730 01 692 0371 Tee, Tube P/n Requested: Wh10lromdcf Nscm/cage / Cof/cage: 30780 Quantity: 10 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 63, Gsin: 4730, Nsn: 4730 14 446 4289 Adapter, Straight, Tube To Boss P/n Requested: Ri1x1/2 Nscm/cage / Cof/cage: F0271 Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 64, Gsin: 4730, Nsn: 4730 14 446 4289 Adapter, Straight, Tube To Boss P/n Requested: Ri1x1/2 Nscm/cage / Cof/cage: F0271 Quantity: 10 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 65, Gsin: 4730, Nsn: 4730 12 131 3965 Nipple, Tube P/n Requested: G10l Nscm/cage / Cof/cage: D8134 Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 66, Gsin: 4730, Nsn: 4730 12 131 3965 Nipple, Tube P/n Requested: G10l Nscm/cage / Cof/cage: D8134 Quantity: 10 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 67, Gsin: 4730, Nsn: 4730 12 143 0160 Elbow Tube P/n Requested: Wsv15l Nscm/cage / Cof/cage: D8134 Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 68, Gsin: 4730, Nsn: 4730 12 143 0160 Elbow Tube P/n Requested: Wsv15l Nscm/cage / Cof/cage: D8134 Quantity: 10 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 69, Gsin: 4730, Nsn: 4730 01 556 0240 Union, Tube P/n Requested: Sv10lomdcf Nscm/cage / Cof/cage: 30780 Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 70, Gsin: 4730, Nsn: 4730 01 556 0240 Union, Tube P/n Requested: Sv10lomdcf Nscm/cage / Cof/cage: 30780 Quantity: 10 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 71, Gsin: 4730, Nsn: 4730 12 383 0939 Adapter, Straight, Tube To Boss P/n Requested: Sv12lomdcf Nscm/cage / Cof/cage: D8134 Quantity: 8 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 72, Gsin: 4730, Nsn: 4730 12 383 0939 Adapter, Straight, Tube To Boss P/n Requested: Sv12lomdcf Nscm/cage / Cof/cage: D8134 Quantity: 8 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 73, Gsin: 4730, Nsn: 4730 12 182 3200 Adapter, Straight, Tube To Boss P/n Requested: Evge12lred Nscm/cage / Cof/cage: D8134 Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 74, Gsin: 4730, Nsn: 4730 12 182 3200 Adapter, Straight, Tube To Boss P/n Requested: Evge12lred Nscm/cage / Cof/cage: D8134 Quantity: 10 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 75, Gsin: 4730, Nsn: 4730 12 371 3068 Elbow, Tube P/n Requested: Ew12lomdcf Nscm/cage / Cof/cage: D8134 Quantity: 12 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 76, Gsin: 4730, Nsn: 4730 12 371 3068 Elbow, Tube P/n Requested: Ew12lomdcf Nscm/cage / Cof/cage: D8134 Quantity: 12 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 77, Gsin: 4730, Nsn: 4730 14 566 4961 Adapter, Straight, Tube To Boss P/n Requested: Ege10lredcf Nscm/cage / Cof/cage: Faqb2 Quantity: 12 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 78, Gsin: 4730, Nsn: 4730 14 566 4961 Adapter, Straight, Tube To Boss P/n Requested: Ege10lredcf Nscm/cage / Cof/cage: Faqb2 Quantity: 12 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 79, Gsin: 4730, Nsn: 4730 14 563 7624 Coupling Tube P/n Requested: Gz12lcf Nscm/cage / Cof/cage: C5018 Quantity: 8 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 80, Gsin: 4730, Nsn: 4730 14 563 7624 Coupling Tube P/n Requested: Gz12lcf Nscm/cage / Cof/cage: C5018 Quantity: 8 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 81, Gsin: 4730, Nsn: 4730 14 553 1150 Adapter, Straight, Tube To Boss P/n Requested: Ge12lr1-2edomdcf Nscm/cage / Cof/cage: Faqb2 Quantity: 12 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 82, Gsin: 4730, Nsn: 4730 14 553 1150 Adapter, Straight, Tube To Boss P/n Requested: Ge12lr1-2edomdcf Nscm/cage / Cof/cage: Faqb2 Quantity: 12 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 83, Gsin: 4730, Nsn: 4730 12 145 5655 Adapter, Straight, Tube To Boss P/n Requested: Ri3/4x3/8 Nscm/cage / Cof/cage: D8134 Quantity: 8 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 84, Gsin: 4730, Nsn: 4730 12 145 5655 Adapter, Straight, Tube To Boss P/n Requested: Ri3/4x3/8 Nscm/cage / Cof/cage: D8134 Quantity: 8 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 85, Gsin: 4730, Nsn: 4730 12 145 4376 Nipple, Tube P/n Requested: Sv6l Nscm/cage / Cof/cage: D8134 Quantity: 12 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 86, Gsin: 4730, Nsn: 4730 12 145 4376 Nipple, Tube P/n Requested: Sv6l Nscm/cage / Cof/cage: D8134 Quantity: 12 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 87, Gsin: 4730, Nsn: 4730 12 375 7584 Tee, Tube P/n Requested: T10lcfx Nscm/cage / Cof/cage: D8134 Quantity: 8 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 88, Gsin: 4730, Nsn: 4730 12 375 7584 Tee, Tube P/n Requested: T10lcfx Nscm/cage / Cof/cage: D8134 Quantity: 8 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 89, Gsin: 4310, Nsn: 4310 33 211 7744 Diaphragm, Pump, Special Shaped P/n Requested: 4008308 Nscm/cage / Cof/cage: 0848b Quantity: 3 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 90, Gsin: 4310, Nsn: 4310 33 211 7744 Diaphragm, Pump, Special Shaped P/n Requested: 4008308 Nscm/cage / Cof/cage: 0848b Quantity: 3 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 91, Gsin: 5930, Nsn: 5930 12 374 3592 Switch, Pressure P/n Requested: Pk6522 Nscm/cage / Cof/cage: C2241 Quantity: 5 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 92, Gsin: 5930, Nsn: 5930 12 374 3592 Switch, Pressure P/n Requested: Pk6522 Nscm/cage / Cof/cage: C2241 Quantity: 5 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 93, Gsin: 6350, Nsn: 6350 12 408 3672 Horn, Signal P/n Requested: 3al002952-811 Nscm/cage / Cof/cage: C6222 Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 94, Gsin: 6350, Nsn: 6350 12 408 3672 Horn, Signal P/n Requested: 3al002952-811 Nscm/cage / Cof/cage: C6222 Quantity: 10 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 95, Gsin: 5925, Nsn: 5925 14 578 5902 Circuit Breaker P/n Requested: A9f94325 Nscm/cage / Cof/cage: Fas02 Quantity: 5 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 96, Gsin: 5925, Nsn: 5925 14 578 5902 Circuit Breaker P/n Requested: A9f94325 Nscm/cage / Cof/cage: Fas02 Quantity: 5 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 97, Gsin: 2920, Nsn: 2920 33 107 4046 Switch, Lock, Ignition P/n Requested: 40130 Nscm/cage / Cof/cage: 1971b Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 98, Gsin: 2920, Nsn: 2920 33 107 4046 Switch, Lock, Ignition P/n Requested: 40130 Nscm/cage / Cof/cage: 1971b Quantity: 10 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 99, Gsin: 5945, Nsn: 5945 33 204 7493 Retainer Electrical Relay P/n Requested: 3032294 Nscm/cage / Cof/cage: 0848b Quantity: 5 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 100, Gsin: 5945, Nsn: 5945 33 204 7493 Retainer Electrical Relay P/n Requested: 3032294 Nscm/cage / Cof/cage: 0848b Quantity: 5 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 101, Gsin: 5999, Nsn: 5999 99 225 5376 Contact, Electrical P/n Requested: Zbe-101 Nscm/cage / Cof/cage: K1674 Quantity: 8 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 102, Gsin: 5999, Nsn: 5999 99 225 5376 Contact, Electrical P/n Requested: Zbe-101 Nscm/cage / Cof/cage: K1674 Quantity: 8 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 103, Gsin: 5999, Nsn: 5999 01 548 3551 Block-assembly P/n Requested: Zb4bz101 Nscm/cage / Cof/cage: 3wag4 Quantity: 8 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 104, Gsin: 5999, Nsn: 5999 01 548 3551 Block-assembly P/n Requested: Zb4bz101 Nscm/cage / Cof/cage: 3wag4 Quantity: 8 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 105, Gsin: 6210, Nsn: 6210 14 596 0263 Light, Indicator P/n Requested: Zb4bvj4 Nscm/cage / Cof/cage: Fas02 Quantity: 8 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 106, Gsin: 6210, Nsn: 6210 14 596 0263 Light, Indicator P/n Requested: Zb4bvj4 Nscm/cage / Cof/cage: Fas02 Quantity: 8 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 107, Gsin: 5895, Nsn: 5895 01 690 4142 Joystick, Data Entry P/n Requested: Xd4pa22 Nscm/cage / Cof/cage: 56365 Quantity: 12 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 108, Gsin: 5895, Nsn: 5895 01 690 4142 Joystick, Data Entry P/n Requested: Xd4pa22 Nscm/cage / Cof/cage: 56365 Quantity: 12 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 109, Gsin: 5895, Nsn: 5895 33 212 1970 Joystick, Data Entry P/n Requested: 6065089 Nscm/cage / Cof/cage: 0848b Quantity: 9 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 110, Gsin: 5895, Nsn: 5895 33 212 1970 Joystick, Data Entry P/n Requested: 6065089 Nscm/cage / Cof/cage: 0848b Quantity: 9 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 111, Gsin: 5930, Nsn: 5930 01 483 8558 Switch, Push P/n Requested: Zbe-102 Nscm/cage / Cof/cage: 51917 Quantity: 8 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 112, Gsin: 5930, Nsn: 5930 01 483 8558 Switch, Push P/n Requested: Zbe-102 Nscm/cage / Cof/cage: 51917 Quantity: 8 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 113, Gsin: 5975, Nsn: 5975 12 407 4752 Locknut, Electrical Conduit P/n Requested: Gmm216/7pa Nscm/cage / Cof/cage: D1129 Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 114, Gsin: 5975, Nsn: 5975 12 407 4752 Locknut, Electrical Conduit P/n Requested: Gmm216/7pa Nscm/cage / Cof/cage: D1129 Quantity: 10 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 115, Gsin: 3120, Nsn: 3120 14 501 0474 Bearing, Sleeve P/n Requested: Paf 40260 P10 Nscm/cage / Cof/cage: F0563 Quantity: 20 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 116, Gsin: 3120, Nsn: 3120 14 501 0474 Bearing, Sleeve P/n Requested: Paf 40260 P10 Nscm/cage / Cof/cage: F0563 Quantity: 20 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 117, Gsin: 5305, Nsn: 5305 33 204 7454 Hexagonal Screw P/n Requested: 0464246 Nscm/cage / Cof/cage: 0848b Quantity: 50 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 118, Gsin: 5305, Nsn: 5305 33 204 7454 Hexagonal Screw P/n Requested: 0464246 Nscm/cage / Cof/cage: 0848b Quantity: 50 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 119, Gsin: 5365, Nsn: 5365 33 207 7402 Spacer, Ring P/n Requested: 5002448 Nscm/cage / Cof/cage: 0848b Quantity: 30 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 120, Gsin: 5365, Nsn: 5365 33 207 7402 Spacer, Ring P/n Requested: 5002448 Nscm/cage / Cof/cage: 0848b Quantity: 30 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 121, Gsin: 3120, Nsn: 3120 12 174 9457 Bearing Sleeve P/n Requested: Pap1015p10 Nscm/cage / Cof/cage: D8092 Quantity: 20 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 122, Gsin: 3120, Nsn: 3120 12 174 9457 Bearing Sleeve P/n Requested: Pap1015p10 Nscm/cage / Cof/cage: D8092 Quantity: 20 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 123, Gsin: 5331, Nsn: 5331 12 389 2854 O-ring P/n Requested: V1 2394 P5008 Nscm/cage / Cof/cage: D1333 Quantity: 15 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 124, Gsin: 5331, Nsn: 5331 12 389 2854 O-ring P/n Requested: V1 2394 P5008 Nscm/cage / Cof/cage: D1333 Quantity: 15 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 125, Gsin: 3110, Nsn: 3110 12 145 5232 Bearing, Ball, Annular P/n Requested: 6002-2rsr Nscm/cage / Cof/cage: Cm647 Quantity: 20 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 126, Gsin: 3110, Nsn: 3110 12 145 5232 Bearing, Ball, Annular P/n Requested: 6002-2rsr Nscm/cage / Cof/cage: Cm647 Quantity: 20 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 127, Gsin: 5340, Nsn: 5340 43 001 2428 Catch, Clamping P/n Requested: Zb-06 Nscm/cage / Cof/cage: 1983h Quantity: 7 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 128, Gsin: 5340, Nsn: 5340 43 001 2428 Catch, Clamping P/n Requested: Zb-06 Nscm/cage / Cof/cage: 1983h Quantity: 7 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 129, Gsin: 9390, Nsn: 9390 12 383 9036 Nonmetalic Special Shaped Section P/n Requested: 209-0206 Nscm/cage / Cof/cage: D4291 Quantity: 30 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 130, Gsin: 9390, Nsn: 9390 12 383 9036 Nonmetalic Special Shaped Section P/n Requested: 209-0206 Nscm/cage / Cof/cage: D4291 Quantity: 30 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Item 131, Gsin: 4730, Nsn: 4730 14 553 1089 Adapter, Straight, Pipe To Tube P/n Requested: Ge06lr1-4edomdcf Nscm/cage / Cof/cage: Faqb2 Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 132, Gsin: 4730, Nsn: 4730 14 553 1089 Adapter, Straight, Pipe To Tube P/n Requested: Ge06lr1-4edomdcf Nscm/cage / Cof/cage: Faqb2 Quantity: 10 Unit Of Issue: Each To Be Delivered To 7cfsd Edmonton, Alberta Bidders Proposing An Equivalent Or A Substitute Product Must Indicate The Brand Name And Model And/or Part Number And The Nscm/cage They Are Offering. The Crown Retains The Rights To Negotiate With Suppliers On Any Procurement. Documents May Be Submitted In Either Official Language Of Canada. Debriefings: Bidders May Request A Debriefing On The Results Of The Bid Solicitation Process. Bidders Should Make The Request To The Contracting Authority Within Fifteen (15) Working Days From Receipt Of The Results Of The Bid Solicitation Process. The Debriefing May Be Provided In Writing, By Telephone Or In Person. Electronic Submission Of Bids: This Requirement Uses Electronic Receipt Of Bids By E-mail Only. For Details, Please Review The Section Entitled Electronic Submission Of Bids In The Solicitation Document. Bids Must Be Submitted By E-mail Only To: Dlp53bidsreceiving.daat53receptiondessoumissions@forces.gc.ca

Description: Contact Information|4|n731.46|n00383|n/a|amanda.m.sweeney4.civ@us.navy.mil| Item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| Higher-level Contract Quality Requirement|8|x|||||||| Time Of Delivery (june 1997)|20||||||||||||||||||||| Stop-work Order (aug 1989)|1|| Wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Report Combo|inspection Site Source Final Acceptance Site Source|tbd|n00383|tbd|tbd|see Schedule |tbd||||||||| Navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| Value Engineering (jun 2020)|3|||| Equal Opportunity (sep 2016)|2||| Integrity Of Unit Prices (nov 2021)|1|| Equal Opportuity For Workers With Disabilities (jun 2020)|2||| Transportation Of Supplies By Sea (jan 2023)|2||| Buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| Limitation Of Liability--high-value Items (feb 1997)|1|| Offeror Representations And Certifications--commercial Products And Commercialservices (may 2024))|3|||| Alternate A, Annual Representations And Certifications (nov 2023)|13|||||||||||||| Buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| Buy American--balance Of Payments Program (feb 2024)|1|| Royalty Information (apr 1984)|1|| Annual Representations And Certifications (may 2024)|12|332439|1250||||||||||| Facsimile Proposals (oct 1997)|1|| Notice Of Priority Rating For National Defense, Emergency Preparedness, Andenergy Program Use (apr 2008))|2||a8c| Evaluation--commercial Products And Commercial Services (nov 2021)|4||||| 1. This Amendment Hereby Increases The Qty Of This Solicitation By Qty 36; From Qty 150 To 186. 2. All Other Terms And Conditions Remain Unchanged. \ This Rfp Is For A Sares Buy And Will Be Using Competitive Procedures. This Requirement Will Be Awarded To The Offeror With The Lowest Price Technically Acceptable (lpta) Quote. The Small Business Administration Representative At Navsup Wss Has Reviewed This Requirement And Determined That A Set-aside Recommendation Was Not Applicable For This Procurement. This Contract/delivery Order/purchase Order/modification Is Issued By The Government When Deposited In The Mail, Transmitted By Facsimile Or Sent By Any Electronic Commerce Method, Including Email. The Government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To Issue This Contract/delivery Order/purchase Order/modification. \ 1. Scope 1.1 Pre-award / Post Award Requirements: Due To The Critical Use Of This Item And Its Quality History, A Pre-award Survey And Post-award Conference May Be Required For All New Manufacturers. For All Previous Sources, A Post-award Conference May Be Recommended. 1.2 Container Shell Material Is ;plastic; . 1.3 Manufacturing Process Is ;rotomolding; . 1.4 When Discrepancies Exist Between These Requirements And Those On Current Manufacturer's Drawings,contact Code ;buyer On Page 1 Of Contract; Or Code N241.10 1.5 Articles To Be Furnished Hereunder Shall Be Manufactured, Tested And Inspected In Accordance With ;hardigg Industries, Inc.; Drawing Number ( ;11214; ) ;18334-0100; , Revision ;latest; And All Details And Specifications Referenced Therein. 1.6 Unless Expressly Provided For Elsewhere In This Clause, Equipment Such As Fixtures, Jigs, Dies, Patterns, Mylars, Special Tooling, Test Equipment, Or Any Other Manufacturing Aid Required For The Manufacture And/or Testing Of The Subject Item(s) Will Not Be Provided By The Government Or Any Other Source And Is The Sole Responsibility Of The Contractor. The Foregoing Applies Notwithstanding Any Reference To Such Equipment Or The Furnishing Thereof That May Be Contained In Any Drawing Or Referenced Specification. 1.7 If Mil-std-454 Is Referenced In The Drawings Or In The Specification, The Contractor Is Expected To Show Compliance With Ipc/eiaj-std-001c. 2. Applicable Documents Drawing Data=18334-0100 |11214| | |d| | | | 3. Requirements 3.1 One Third (1/3) Unit Of Desiccant (mil-d-3464, Type Ii Nondusting) Per Cubic Foot Of Container Interior Volume Shall Be Placed In Desiccant Holder Of Each Container At Time Of Shipment. 3.2 Reference To Cadmium Plating Shall Be Deleted And The Following Substituted: "finish Shall Be Electrodeposited Alkaline Zinc-nickel Alloy In Accordance With Astm B 841 Class 1, Type B, Grade 3." All Containers Must Be Affixed With A Nameplate That Includes A Unique Identification (uid) Marking As Referenced In The Drawing Package Drawing ;(80132) 15930; And Iaw Mil-std-130 Latest Revision. The Contractor Shall Contact Navicp Code ;0771.13; Or Code 0771.10 For The Alphanumeric Sequential Serial Number Group That Makes Up Part Of The Uid. The Uidwill Be Included On The Nameplate In Data Matrix Format. When A First Article Is Required, The Contractor Shall Submit A Paper Copy Of The Drawings (size 11" X 17"), Contracts And Approved Ecp's Eco's, Deviations Waivers, And Modifications In The Records Recepticle Or Inside The Container Submitted For The First Article. Contact Code ;contact Buyer On Page 1 Of Contract; Or Code N241.10 To Arrange For First Article Test Location 4. Quality Assurance 4.1 The Tests To Be Performed Under The First Article Approval Clause (far 52.209-4) Of The Contract Are Listed Below. 4.1.1 Dimensional Test (special) ;iaw Drawing (11214) 18334-0100 And Subdrawings Is Applicable; 4.1.2 Requirements Of: ;iaw Drawing (11214) 18334-0100 And Subdrawings Is Applicable; 4.1.3 Form: ;applies; 4.1.4 Fit: ;applies, Use Actual Item; 4.1.5 Function ;applies; 4.1.6 Compliance With Drawing ( ;11214; ) ;18334-0100; , Revision ;latest; And Specifications Referenced Therein. 4.2 In Addition To The Above Tests, The First Article(s) To Be Delivered Hereunder Shall Also Be Subjected To Those Tests Which Will Demonstrate That The Article(s) Comply With Contract Requirements Requirements. 4.3 The Contractor Shall Be Responsible For Providing The Necessary Parts And Repair Of The First Article Sample(s) During Testing. 4.4 The Cost Of The Government Testing Effort Set Forth In This Solicitation Is Estimated To Be $ ;10,000; For The First Article Testing. This Cost Factor Will Be Added, For Solicitation Purposes, To The Price Of All Offerors For Whom The Government Will Require Such Testing. 4.5 Disposition Of Fat Samples 4.5.1 ;zero; Sample(s) Shall Not Be Returned To The Contractor Because They Shall Be Destroyed During Testing. 4.5.2 ;all; Unless Otherwise Provided For In The Contract, Sample(s) Shall Be Returned To The Contractor And May Be Considered As Production Items Under The Contract Provided The Sample(s) Can Be Refurbished To Ready For Issue Condition And Provided The Sample(s) Have Inspection Approval From The Cognizant Dcmc Qar. Sample(s) May Be Shipped As Production Items Only After All Other Units Required Under The Contract Have Been Produced And Are Ready For Shipment. ;n/a; Sample(s) Shall Be Returned To The Contractor But Shall Not Be Considered As Production Due. 4.6 Test Sample Coating Instructions 4.6.1 Samples Are To Be Unpainted. Corrosive Areas Are To Be Coated With A Light Preservative.this Paragraph Does Not Apply To Shipping Containers. 4.7 Fat Approval Criteria 4.7.1 Far 52.209-4 Applies (a) The Contractors Shall Deliver ;one (1); ; Unit(s) Of The Following Cage ( ;11214; ; ) Part Number ;18334-0100; ; , Revision ;latest; ; Within ;120; ; Calendar Days From The Date Of This Contract To The Government At ;contact Buyer On Page 1 Of Contract; ; Marking Of Test Sample(s) Shipping Container Shall Be As Follows, Citing This Contract Number: "for First Article Testing. Not Rfi Material. Do Not Take Up In Stock Contract Number:____________" For First Article Test, The Shipping Documentation Shall Contain This Contract Number And Lot/item Identification. The Characteristics That The First Article Must Meet And The Testing Requirements Are Specified Elsewhere In This Contract. (b) Upon Shipment Of First Article Sample(s), Two (2) Copies Of The Material Inspection And Receiving Report (dd Form 250) Bearing The Qar's Signature And Indication Of Preliminary Inspection Shall Be Forwarded To The Navicp- Philadelphia Code Cited In Block 10.a Of Sf33, With Duplicate Copies To Navicp Code 072 And To The Designated Test Facility. The Envelopes Shall Be Clearly Marked: "do Not Open In Mail Room". Within ;90; ; Days After Receipt Of The Samples, The Test Site Shall Complete Testing/evaluation And Submit Two (2) Copies Of Their Test Report With Conclusions And Recommendations To The Navicp Code Cited In Block 10.a Of The Sf33. (c) Within ;30; ; Calendar Days After The Government Receives The First Article, The Contracting Officer Shall Notify The Contractor, In Writing, Of The Approval, Conditional Approval, Or Disapproval Of The First Article. The Notice Of Approval, Conditional Approval, Or Disapproval Shall Not Relieve The Contractor From Complying With All Requirements Of The Specifications And All Other Terms And Conditions Of This Contract. A Notice Of Conditional Approval Shall State Any Further Action Required Of The Contractor. A Notice Of Disapproval Shall Cite Reasons For Disapproval. (d) If The First Article Is Disapproved, The Contractor, Upon Government Request, Shall Submit An Additional First Article For Testing. After Each Request, The Contractor Shall Make Any Necessary Changes, Modifications, Or Repairs To The First Article Or Select Another First Article For Testing. All Costs Related To These Tests Are To Be Borne By The Contractor, Including Any And All Costs For Additional Tests Following A Disapproval. The Contractor Shall Furnish Any Additional First Article To The Government Under The Terms And Conditions And Within The Time Specified By The Government. The Government Shall Act On This First Article Within The Time Limit Specified In Paragraph (b) Above. The Government Reserves The Right To Require An Equitable Adjustment Of The Contract Price For Any Extension Of The Delivery Schedule Or For Any Additional Costs To The Government Related To These Tests. (e) If The Contractor Fails To Deliver Any First Article On Time, Or The Contracting Officer Disapproves Any First Article, The Contractor Shall Be Deemed To Have Failed To Make Delivery Within The Meaning Of The Default Clause Of This Contract (f) Unless Otherwise Provided In The Contract, The Contractor - (1) May Deliver The Approved First Article As Part Of The Contract Quantity, Provided It Meets All Contract Requirements For Acceptance And Was Not Consumed Or Destroyed In Testing: And (2) Shall Remove And Dispose Of Any First Article From The Government Test Facility At The Contractors Expense. (g) If The Government Does Not Act Within The Time Specified In Paragraph (b) Or (c) Above The Contracting Officer Shall, Upon Timely Written Request From The Contractor, Equitably Adjust Under The Changes Clause Of This Contract The Delivery Or Performance Dates And/or The Contract Price, And Any Other Contractual Term Affected By The Delay. (h) The Contractor Is Responsible For Providing Operating And Maintenance Instructions, Spare Parts Support, And Repair Of The First Article During Any First Article Test. (i) Before First Article Approval, The Acquisition Of Materials Or Components For, Or The Commencement Of Production Of, The Balance Of The Contract Quantity Is At The Sole Risk Of The Contractor. Before First Article Approval, The Costs Thereof Shall Not Be Allocable To This Contract For (1) Progress Payments, Or (2) Termination Settlements If The Contract Is Terminated For The Convenience Of The Government (j) The Contractor Shall Produce Both The First Article And The Production Quantity At The Same Facility And Shall Submit A Certification To This Effect With Each First Article. (k) The Contractor Shall Provide Specific Written Notification To The Procuring Contracting Officer Informing Him/her Of The Shipment Of Any Article(s) Furnished In Accordance With This Clause. Such Notification Must Be Addressed To The Attention Of The Navicp Code Specified In Block 10.a Of The Sf33, With Copies To Navicp Code 072 And To The Testing Activity. Failure To Provide Such Notification Shall Excuse The Government From Any Delay In Performing First Article Testing And Informing The Contractor Of The Results Thereof. (l) Fourteen (14) Days Prior To Shipment Of First Article Samples, The Contractor Shall Notify The Designated Test Facility In Writing Of The Anticipated Shipping Date, With An Information Copy To The Pco, Navicp Philadelphia, Attn: (cite Code Found In Block 10.a Of The Sf33). The Contractor Shall Also Arrange For Preliminary Inspection Of Test Samples By The Dcmc/qar. 4.8 Alternate Offers - Waiver Of First Article Approval Requirements. (the Following Provisions Supersede Any Waiver Of First Article Approval Requirements Terms Set Forth In Clause 52.209-3 Or 52.209-4 As Appropriate) (a) Unless Otherwise Specified In The Solicitation, The Naval Inventory Control Point Reserves The Right To Waive The First Article Approval Requirements Specified Herein For Offerors Who Have Previously Furnished Identical Production Articles Accepted By The Government Or The Original Equipment Manufacturer/prime Manufacturer. An Offeror Requesting Waiver Of First Article Requirements Shall Submit Evidence With Its Offer Establishing That: (i) The Last Production Unit Was Delivered Within Three (3) Years Of The Issue Date Of This Solicitation, And (ii) The Production Location To Be Used For This Requirement Is The Same As Used For The Previous Production Run Additionally, The Offeror Shall Submit A Certification, To Be Executed By The Officer Or Employee For The Offer, Stating That: (i) The Articles To Be Provided Will Be Produced Using The Same Facilities, Processes, Sequences Of Operations And Approved Subcontractors As Those Previously Delivered And Accepted By The Government Or The Original Equipment Manufacturer/prime Manufacturer, And (ii) The Previous Production Units Were Manufactured Without Material Review Board Disposition Or Waiver/deviation Request Or Rejection Of Pre-production Samples For Cause. (note: This Certification Concerns A Matter Within The Jurisdiction Of An Agency Of The United States And The Making Of A False, Fictitious, Or Fraudulent Certification May Render The Maker Subject To Prosecution Under Title 18, United States Code, Section 1001.) (b) Offerors Requesting Waiver Of First Article Approval Requirements Under The Provisions Of This Clause Are Cautioned To Submit Two Prices For Articles Required Herein - One That Is Based On Compliance With The First Article Approval Requirements And One That Is Based On A Waiver Of Such Requirements. Where An Offeror Submits Only One Price And Fails To Clearly State That The Price Is Based On Waiver Of The First Article Approval Requirements It Will Be Deemed To Be Based On Compliance With The First Article Approval Requirements (c) In The Event Of The First Article Approval Requirement Is Granted, The Delivery Schedule For The Production Items Shall Be Reduced By The Number Of Days Designated For Delivery Of First Article Test Unit Plus The Number Of Calendar Days Indicated For The Government Notification Of Conditional Approval Or Approval. These Requirements Are Specified In The Quality Assurance Section Of This Solicitation. If The Offeror Is Unable To Meet The Desired Schedule, He Shall Insert Below The Alternate Delivery Schedule He Offers To The Government. Offeror's Proposed Alternate Delivery Schedule (based On Waiver Of First Article Approval Requirements) Within Days: Item No. _______________ Quantity:_______ After Date Of Contract:__________ Sampling Per Ansi/asq Z1.4, Sample Plan S-2aql 1.0 (13 Pcs) Accept 0, Reject 1.one (1) Rejection Will Require 100% Of The Shipment To Be Tested. A Lot Shall Consist Of Any Scheduled Shipment Quantity Under Contract. Representative Sampling Shall Be Used, I.e. The Samples Are To Be Selected At Random Throughout The Lot.remove Either The Vortex Or Breather Valve And Install A Suitable Airtight Fitting.draw A Vacuum On The Sample Container(s) To .025+/- 0.01 Psig.stabilize Vacuum Within Tolerance For A Minimum Of 15 Minutes, Then Disconnect The Vacuum Input And Test Monitor The Container For 15 Minutes.the Vacuum Should Hold Within +/- 0.05 Psig At The End Of The 15 Minutes For The Container To Pass. Testing Specifications For Cases: Drop Test:fed-std-101c. Method 5007.1 Paragraph 6.3,procedure -a- Level -a-. Procedure A Falling Dart Impact: Ata 300, Category I,general Requirements For Category I & Ii Reusable Containers Vibration (loose Cargo): Fed-std-101c, Method Of 5019 Vibration (sweep):ata300, (jan 15th/96),which States In Appendix Ii, B4 Simulated Method 506.4, Procedure Ii Of 4.1.2 Fed-std-101c Method 5009.1, Section 6.7.1. All Costs And Responsibilities Related To The First Article Test Submission Container Shipment To And From The First Article Test Facility Are To Be Borne By The Contractor. 4.9 100% Production Leak Test. Each Container Shall Be Prepared For Testing By Sealing All Breathing Devices And Inserting Suitable Pressurized Fittings And Gauges. The Container Shall Be Closed And Sealed In A Normal Manner. Each Container, Uninstrumented And Without Dummy Load, Shall Then Be Subjected To A Single 18 Inch Flat Drop. The Pneumatic-pressure Technique Of Method 5008 Of Federal Test Method Standard No. 101c Shall Be Used To Detect Leakage. An Initial Setting Equal To 0.5 + 0.1 - 0 Psig Shall Be Used. After Stabilization, Pressure Shall Be Monitored For Thirty Minutes. Any Loss In Pressure Over A 30 Minute Period That Exceeds 25% Of The Stabilized Pressure Shall Be Cause For Rejection; Tests Shall Be Conducted To Ascertain Sources Of Leaks And Corrective Action Taken. Any Deformation Of The Container Shell While Pressurized Which Is Greater Than Three-quarters Of An Inch Beyond Its Point At Ambient Pressure Shall Also Be Cause For Rejection. Warning Container May Explode Or Fasteners May Fail During Test. Use Protective Barriers To Avoid Injury To Personnel. 4.10 100% Production Leak Tests. Each Container Shall Be Prepared For Testing By Sealing All Breathing Devices And Inserting Pressurizing Fittings And Gauges. The Container Shall Be Closed And Sealed In A Normal Manner. The Pneumatic - Pressure Technique Of Method 5009 Of Federal Test Method Standard No. 101c Shall Be Used To Detect Leakage. An Initial Pressure Setting Equal To 0.25 + 0.1-0 Psig Shall Be Used. After Stabilization, Pressure Shall Be Monitored For Thirty Minutes. Any Loss In Pressure In Excess Of 0.05 Psig (adjusted For Changes In Temperature And Barometric Pressure) Shall Be Cause For Rejection. Any Deformation Of The Container Shell, While Pressurized, Which Is Greater Than Three Quarters Of An Inch Beyond Its Point At Ambient Pressure Shall Also Be Cause For Rejection. 5. Packaging- Mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes - Not Applicable

Details: The Department Of Veterans Affairs, Networking Contracting Office (nco 01) Located In providence, Ri Intends To Enter Into A Sole Source Procurement, Pursuant To The Authority Of Far 6.302-1, With Airgas Usa, Llc., For The Following Requirement: statement Of Work lease Of Medical Gas Cylinders this Statement Of Work Describes The Requirements For The Lease, Delivery, Removal, And Filling Of Both Leased And Government Owned Cylinders For Vha Medical Facilities. Base +4 Years scope Of Work: Providence Va Medical Center Leases Various Medical Gas Cylinders And Needs To Establish A Committed Source For The Leased Cylinders And Supply Services For Medical And Specialty Gases. The Contractor Shall Provide All Labor, Personnel, Equipment, Tools, Materials, Supervision And Other Items And Services Necessary To Perform The Following. base +4 Years lease Of Medical Gas Cylinders: Large Cylinders, Small Cylinders And High-pressured Cylinders. delivery Of Full Cylinders, Clean And Ready For Immediate Patient Use. removal Of Empty Cylinders To Refill At Their Facility. 1. Equipment all Cylinders Leased By The Contractor Shall Be Fda Approved For Use, In Good Condition, And Fully Operational. the Providence Va Medical Center Shall Provide A Suitable Location For The Drop Off For New Cylinders And The Collection Of Used Cylinders. Through The Duration Of The Contract The Contractor Shall Be Liable For The Integrity, Suitability And Safety Of Contractor Owned Tanks. the Contractor Shall Provide All Tools And Equipment Necessary To Properly And Safely Perform The Services Set Forth Within This Statement Of Work. This Shall Include, But Is Not Limited, To All Personal Protective Equipment (ppe) Which May Be Required For The Work To Be Completed In A Safe Manner. The Contractor Shall Provide Any Equipment Necessary For Proper Infection Control Measures. 2. Salient Characteristics the Contractor Shall Provide A Fully Functional System That Meets The Following Characteristics: compressed Gas Cylinders Responsible For Protecting Compressed Gas Quality And Stability, From Fill Through To Point Of Use. ergonomic User-friendly Cylinder And Valves For Small, Medium, And Mobile Gas Needs. 2. Areas To Be Serviced department Of Veterans Affairs providence Va Medical Center 830 Chalkstone Ave providence, Ri 02908 3. Delivery delivery Of Requested Items Shall Be Delivered By The Vendor Within Seven (7) Business Day. (specific Delivery Time Per Negotiated Solicitation/contract Within These Defined Time Periods Or By Special Request Per Negotiated Fss Contract) After Receipt Of Request. cylinders Delivered Must Be Clean, In Good Working Condition, And Available For Immediate Patient Use. contractor Shall Call Requesting Service When Dropping Off New Cylinders And Removing Empty Cylinders. an Employee Will Accompany The Contractor To The Oxygen Storage Area. the Employee Will Verify The Replacement Of New And Removal Of Empty Cylinders. 4. Training the Contractor Shall Provide Onsite General Overview Technical Training For Clinical And Logistics Staff As Requested. Training Shall Include A Technical Overview Of The Mechanics, And General Operations Of Leased Cylinders. Training Shall Cover Detailed Instruction Regarding The Preventative Maintenance, Troubleshooting, And General Maintenance Of The Equipment. 5. Inspection And Acceptance the Contractor Shall Conduct A Joint Inspection With An Employee From The Requesting Service Upon Delivery Of Cylinders. 6. Warranty the Warranty Shall Include All Travel And Shipping Costs Associated With Any Warranty Repair. 7. Task Frequency And Instructions cylinders Will Be Filled As Needed. empty Cylinder Quantity Being Returned To The Contractor Should Equal The Number Of Cylinders Being Delivered By The Contractor. cylinders Delivered Will Be Filled To The Maximum Functional Capacity. 8. Special Work Requirements the Contractor Shall Comply With Any And All Infection Control Risk Assessment Requirements Deemed Appropriate By The Providence Va Medical Center During All Portions Of The Work Set Forth In The Scope Of Work. the Contractor Must Comply With Security, Privacy, And Safety Issues In Accordance With Va Standards, Policies, And Directives Set Forth At All Times While Providing The Work Outlined In The Scope Of Work. 9. Property Damage the Contractor Shall Take All Necessary Precautions To Prevent Damage To Any Government Property. The Contractor Shall Report Any Damages Immediately And Shall Be Assessed Current Replacement Costs For Property Damaged By The Contractor Unless Corrective Action Is Taken. Any Damaged Material (e.g. Trees, Shrubs, Lawn/turf, Curbs, Gutters, Sidewalks, Etc.) Will Be Replaced In A Timely Manner Or Corrected By The Contractor With Like Materials, At No Extra Cost To The Government, Upon Approval Of The Contracting Officer. 10. Attachments none. 11. Identification, Parking, Smoking, Cellular Phone Use And Va Regulations the Contractor's Employees Shall Wear Visible Identification At All Times While On The Premises Of The Va Property. It Is The Responsibility Of The Contractor To Park In The Appropriate Desig Nated Park Ing Areas. Information On Parking Is Available From The Va Police-security Service. The Va Will Not Invalidate Or Make Reimbursement For Parking Viola Tions Of The Con Tractor Under Any Con Ditions. Smoking Is Prohibited Inside Any Buildings At The Va. Cellular Phones And Two-way Radios Are Not To Be Used Within Six Feet Of Any Medical Equipment. Posses Sion Of Weapons Is Prohibited. Enclosed Containers, Including Tool Kits, Shall Be Sub Ject To Search. Violations Of Va Regulations May Result In A Citation Answer Able In The United States (federal) Dis Trict Court, Not A Local District State, Or Municipal Court. 12. Compliance With Osha Bloodborne Pathogens Standard The Contractor Shall Comply With The Federal Osha Blood Borne Pathogens Standard. The Contractor Shall: A. Have Methods By Which All Employees Are Educated As To Risks Associated With Blood Borne Pathogens. B. Have Policies And Procedures Which Reduce The Risk Of Employee Exposure To Blood Borne Pathogens. C. Have Mechanisms For Employee Counseling And Treatment Following Exposure To Blood Borne Pathogens. D. Provide Appropriate Personal Protective Equipment/clothing Such As Gloves, Gowns, Masks, Protective Eyewear, And Mouthpieces For The Employee During Performance Of The Contract. the Naics Code For This Requirement Is 325120. airgas Usa, Llc Is The Only Contractor Capable Of Satisfying The Statement Of Work Because They Are The Sole Provider Of The Specialty, Medical Air Gas Rental Cylinders. this Notice Of Intent Is Not A Solicitation Nor Is It A Request For Proposal. However, All responsible Sources May Submit A Capability Statement Demonstrating The Ability To provide The Requested Services, In Writing By Friday, January 17, 2025 At 5 Pm Est Time. Responses Should Be Sent To Rosangela Pereira At Rosangela.pereira@va.gov. information Submitted In Response To This Notice Will Be Used Solely To Determine Whether competitive Procedures Could Be Used For This Acquisition. A Determination Not To Open the Requirement To Competition Based Upon Responses To This Notice Is Solely Within The discretion Of The Government.

Details: Description 4 Pcs. "alarm Clock, Digital, Overall Dimensions: 13.5 X 8 X 4.5 Cm (approx.) Material: Plastic (pe/abs) Illuminated Lcd Digital Display: Time (12/24), Calendar (mm/dd), Temperature, Alarm Status (on/off), Snooze Display Size: 10 X 5 Cm (minimum), Time Can Be Read 30 Ft Day Time. Runs On Aaa Battery Which Come Together With The Item Smooth Surface, No Sharp Edges, Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting." 100 Pcs. "apron, Polyester-cotton , Bib Apron, Sleeveless Adjustable Neck Loop Material : Polyester - Cotton Fabric Dimension : 70 To 60 Cm (minimum) With 2 Or 3 Pockets Uni-color, Dark No Sharp Edges And Loose Threads" 20 Pcs. "baskets, Laundry 3 - Bag Laundry Sorter, With Wheels Bag: Polyester, Rectangular Shape, Detachable From Frame With Metal Handle And Hanging Hook Bag Dimensions : Rectangular 22 X 15 X 8 Inch (minimum) Frame Material : Corrosion Resistant Steel, Sturdy No Wobble Frame Overall Dimensions : Rectangular, 31 X 30 X15 Inch (minimum) With Four Casters, 2 Inch Diameter (minimum) Smooth Surface, No Sharp Edges" 3 Pcs. "bed, Queen Bed Set, Queen Size (60 X 75 Inch) Rectangular 1) Frame: Knock-down Type, All Steel, Powder Coated Including Head Board, Bare Weight: 20 Kg (minimum) No Wobble And Noise 2) Comes With Fabric Covered Foam 6 Inches Thick Foam Density: 29 -33 Kg/cu.m. 3) No Sharp Edges" 4 Pcs. "bed, Single Size (w36 X L75 Inch) Rectangular 1) Frame: Knock-down Type, All Steel, Powder Coated Including Head Board, Bare Weight: 13 Kg (minimum) No Wobble And Noise 2) Comes With Fabric Covered Foam 6 Inches Thick Foam Density: 29 -33 Kg/cu.m. 3) No Sharp Edges" 4 Pcs. "board, Ironing Type: Foldable Type Ironing Board Body Shape : Standard Material : 25 Mm Tubing Approx., 0.8 Mm Thickness Board Size: 32 Inches (minimum ) Body Size :120 Cm X 30 Cm X 5 Cm Color : Any Comes With Box No Sharp Edges" 40 Pcs. "boots, Safety, Plastic Upper Material: Elastic Pvc Sizes: 7 Inches - 5pcs 8 Inches - 5pcs 9 Inches - 5pcs 10 Inches -5pcs 11 Inches - 5pcs Height: 13 To 14 Inches Plain Toe Type Of Boots: Unisex Rain Boots With Rugged Tractor Lug Outsole Packed With Carton Box Per Size" 20 Pcs. "brush, For Housekeeping Brush, Floor Scrubbing, Angled Long Handle Bristle Material : Plastic, Stiff Handle Material : Metal Tubular Corrosion Reistant, Overall Length : 120 Cm. (minimum) Bristle Length : 5 Cm (=/- 1cm) Scrubbing Surface : 25 X 6 Cm (+/-1 Cm) No Sharp Edges" 20 Pcs. "water Bucket Bucket Material : Hard Plastic, Round Body Capacity : 10 To 12 Liters Handle Material : Steel Smooth And Glossy Surface, No Sharp Edges" 4 Pcs. "caddy, Toilet Carrying Caddy For Toilet Cleaning Supplies Holds Spray Bottles And Other Cleaning Supplies, No. Of Compartments: 3 (minimum) Material :plastic Tray Depth: 11 Cm (approx.) Overall Dimension: 36 X 26 Cm (approx.) Smooth Surface, No Sharp Edges" 4 Pcs. "carpet Sweeper, Cordless Electric Motorized Single Brush Roll (removable) Body Material : Hard Plastic ,(abs) Or Its Equivalent, Any Color Equipped With Rechargeable Battery (16 Minutes Run Time On Carpet), Removable Dirt Box Sweep Width : 8 Inches (minimum) Capacity (volume) : 0.35 Lit.(minimum) Handle: Metal, Powder- Coated, With Plastic/rubber Grip, Swivel Steering Assembled Height: 44 Inches (minimum) Comes With Battery Charger 220/240vac, 50/60hz With Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) No Sharp Edges Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting" 4 Pcs. "housekeeping Cart Trolley Equipped With Three-shelves With Steel/laminated Panels Single Door, Top Layer With Divider, Bag Holder, And 4 Wheels Cart Frame: Steel, Powder Coated Wheels: 2non-swivel 2 Swivel, 6 Inch Diameter, Non-markings Overall Dimensions : Rectangular 90 X 48 X 1010 Cm (minimum) Comes With Accessory Linen Bag Smooth Surface, No Sharp Edges" 20 Pcs. "caution Sign, A Shape-2 Panel Self Standing, With D-handle, Collapsible For Easy Storage Material : High Impact Plastic, Panel Dimension : Rectangular (lxw) 55-65 Cm X 25 X 61 0m (minimum), Panel Depth : 2 Cm (minimum) Color : Yellow Print Description : ""caution: Wet Floor"" On One Side ""cleaning In Progress On The Other Side, Both Messages Provided With Graphics Printed In Black. Font Size: 100 -120 Mm X 50 -70 Mm, Arial Smooth Surface, No Sharp Edges" 40 Pcs. "lint Free Cleaning Cloths Material : Cotton Dimensions : Rectangular 16 X 26 Inch" 4 Pcs. "coffee Maker, Electric Material: Metal, Plastic, Glass Capacity: 6 Cups (minimum) Detachable Tank, With Water Level Indicator Non-stick Warming Plate : Removable And Washable Filter Non-drip Valve : Lighted On/off Switch Power Supply: 220 V -240 V Ac 50/60 Hz , 500w Minimum Comes With A Heat Resistant Glass Pitcher With A 1 Meter (minimum) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, Safety Guide. 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines." 20 Pcs. "dust Pan, Upright Standing Material: Plastic Overall Length: 65 Cm (minimum) Pan: Round Back, 24 X 26 X 9 Cm (minimum) Smooth Surface, No Sharp Edges" 20 Pcs. "anti-static Duster Duster Material : Polypropylene Micro Fiber Duster: Length : 30 Cm (minimum), Overall Length: 50 Cm (minimum) Handle Material : Hard Plastic, No Sharp Edges" 12 Pcs. "stand Fan, Electric Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 1 Year Warranty Parts And Service" 10 Pcs. "fire Extinguisher (with Contents) 1.for Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2.portable Type 3.capacity : 5 - 6 Kgs 4.rechargeable Cylinder Metal 5.working Pressure Of Cylinder : 400 Psi 6.brass Valve With Pressure Gage 7.with Rubberized Hose And Aluminum Nozzle Attached 8.with Squeeze Lever To Discharge And Safety Pin 10.painted With Metal Primer And Red Enamel Paint 11.includes With User's Guide In English That Contains: A. Operating Procedure On How To Use The Equipment B. Safety Precaution When Using The Equipment 12.1 Year Warranty Parts And Service 13.the Item Must Be Branded And Have Good Quality" 20 Pcs. "flashlight Led 1,000 Lumens (minimum), Color : White , Battery: Rechargeable, At Least 3,500 Mah , Can Be Used Also With 3 X Aaa Batteries; Body: Aluminum Alloy, No Sharp Edges Dimensions : 5 Inches X 1 Inch Diameter (minimum) Operating Duration Of Battery When Fully Charged : At Least 2 Hours; Includes 220/240vac, 50/60hz Power Adapter /charger And User's Manual In English Which Includes: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures Branded, With 1 Year Warranty " 4 Pcs. "clothes Flat Iron, Electric Material : Metal /plasic Body, Heat-resistant Plastic Handle, Aluminum Sole Overall Dimension : (l X W X H) 25 Cm X 12 Cm X 12 Cm (minimum) Power Rating : 220/240 Vac, 50/60 Hz; 1000 Watts (minimum) Equipped With Light Indicator, Variable Temperature Control, Overheat Protection, Power Cord And Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges, Comes With English Manual That Contains : Users Guide, List Of Parts, Maintenance Guide, Safety Guide. The Item Must Be Branded, With Dti-bps Certification 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines." 40 Pcs. "foam, Scrubbing 1. Material: Cellulose And A Scouring Pad On One Side 2. Dimension: Length : 140 - 180 Mm ; Width : 80 - 100 Mm ; Thickness : 12 - 20 Mm 3. The Item Must Be Of Good Quality" 8 Pcs. "garbage Receptacles 1.bucket / Tub Material : Hard Plastic, (ps) Polystyrene 2.bucket / Tub Color : Any Color 3.capacity (gallons) : 3 Gal. (minimum) Comes With A Cover 4.the Item Must Have Good Quality" 100 Pcs. "gloves, Rubber 1.heavy-duty Latex-free Vinyl Rubber Gloves 2.thickness : 4 Mil 3.color : Any Color 4.size : Medium 5.other Features: Acid/solvent Resistant. 6.the Item Must Be Of Good Quality" 60 Pcs. "safety Goggles, Clear Polycarbonate - One Piece Lens With 180° Panoramic View, Non-fog Size/dimension: L 17 - 18.5 Cm X W 8 Cm X D 5-7.5 Cm High Impact Resistant, Ansi ""z87"" Compliant Firm And Comfortable Seal Around Forehead, Cheeks, Nose And Temples Protects Against Splash, Chemicals, Dust Adjustable Head Strap Shall Bear Mark Z87 Embossed Or Engraved Or Etched On The Item. Smooth Surface, No Sharp Edges" 8 Pcs. "electric Hairdryer, With Concentrator Nozzle Two Heat Setting And 1 Speed (minimum) Rating : 220/240 Vac, 1200 W (minimum) Body Length Including Nozzle: 20 Cm Folding Handle Design, With Hanging Ring Smooth Surface, No Sharp Edges Branded, Brand Name And Electric Rating Permanently Mark On The Item, With Dti-bps Certification With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. With Service Centers Located In Major Cities In The Philippines. 1 Year Warranty(parts & Service)" 8 Pcs. "water Hose Material: Pvc Fiber Reinforced, Three (3) Layers; Any Color; Hose Length: 50 Feet; Hose Diameter: 5/8 Inches; Pressure Capacity: 200 Pounds Per Square Inch (minimum); Fitted With Male And Female Brass Couplers (nh, 11.5 Tpi) For Spray Nozzle No Sharp Edges" 8 Pcs. "electric Kettle Cordless (with Pouring Spout), Hinged Lid, Detachable From And Can Rotate On Its Corded Base Material : Round Stainless Body, Plastic Handle, Lid And Base Capacity : 1.5 To 2 Liter Automatic Shut - Off, With Power Indicator Light Power Rating: 220//240vac, 50/60hz, 1000 -1600 Watts Base With A 50 Cm (minimum) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges; Dti-bps Certified Comes With English Manual That Contains: Operation Procedure, Maintenance And Safety Guide. The Item Must Be Branded, Brand Name And Electrical Ratings Permanently Mark On The Item." 20 Pcs. "3 - Bag Laundry Sorter, With Wheels Bag: Polyester, Rectangular Shape, Detachable From Frame With Metal Handle And Hanging Hook Bag Dimensions : Rectangular 22 X 15 X 8 Inch (minimum) Frame Material : Corrosion Resistant Steel, Sturdy No Wobble Frame Overall Dimensions : Rectangular, 31 X 30 X15 Inch (minimum) With Four Casters, 2 Inch Diameter (minimum) Smooth Surface, No Sharp Edges" 8 Pcs. "emergency Light, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 "" Dome Reflector Power Rating: 220 -240 Vac , 50/60 Hz 20-24 Hours Charge Time Dimensions: Rectangular 27 X 7 X 27 Cm (approx.) Sooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures The Item Must Be Branded, Brand Name And Electrical Ratings Permanently Mark On The Item" 4 Pcs. "wall Mirror With Frame Flat Glass Mirror, 2 Mm Thick (minimum), Clear With No Distortion Frame: Wood Or Plastic Commercial Finish Rectangular Shape, 3600 Sq.cm (minimum) Includes Mounting Accessories Smooth Surface, No Sharp Edges" 21 Pcs. "mop, Handle And Mop Head Set, Refillable Head Handle: Aluminum Or Anti-rust Coated Steel, With Hard/stiff Plastic Mop Head Holder, Clip Type With Tightening Knob Overall Handle Dimension: 130 X 19 Cm (minimum) Mop Head: Cotton Thread/yarn, Sewn Tailband, L 34 X 16 X 4 Cm (minimum), White Handle: Plated Steel Tube Or Wood, Length : 40 (minimum), No Sharp Edges" 4 Pcs. "electric Floor Polisher With Accessories Material: Stainless Steel, Aluminum Alloy Handle: Stainless Tube, Adjustable Height 1 Meter Long (approximate), With Dual Switch Lever Size/capacity :13 Inch (minimum) Diameter Power Supply: 220/240 Vac, 50/60 Hz. Power: 1/3 Hp (minimum) Rotation Speed : 160 Rpm (minimum) Heavy Duty (royal) Power Cord Length : 12 Meters (minimum) With Type A Plug (or Providing 10a Plug Adapter Is An Option) With Pair Of Rubber Wheels, Smooth Surface, No Sharp Edges Comes With Pad Holder, 2 Pcs - Polishing Brush And 3 Pcs - Floor Polishing Pads Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures Branded, Brand Name And Electric Rating Permanently Mark On The Item, With 1 Year Warranty Parts And Service The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market." 4 Pcs. "shelving, Open, Knockdown Type, Adjustable Shelves Metal Powder Coated Frame Number Of Shelves : 5 Overall Dimensions : 85 X 30 X 180 Cm(minimum) Sturdy Connection, No Wobble Smooth Surface, No Sharp Edges" 40 Pcs. "dish Sponge, Cellulose, Non-scratch Dimensions : 5 X 3 X 1 Inch (minimum) Branded" 23 Pcs. "barber/salon Spray Gun Material: Hdpe Transparent Plastic Capacity: 300 Ml.(minimum) Trigger Type Sprayer Dimension: Diameter :7 Cm. X Height: 16.3 Cm (minimum) Rotating Nozzle To Adjust Spray Patterns Smooth Surface, No Sharp Edges Must Be Branded" 8 Pcs. "squeegee, Short Handle Head/blade Material: Stainless, Rubber Handle: Plastic Or Stainless Steel Blade Length: 25 - 30 Cm Overall Length (handle And Head) 20 - 32 Cm No Sharp Edges " 8 Pcs. "mop Bucket With Squeezer/wringer And Wheels Hand Lever To Squeeze, Made Of Metal, With Hand Grip Material : Hard Plastic, (ps) Polystyrene Or Its Equivalent Capacity : 30 L (minimum) Overall Dimension (excluding Handle: ( L X W X H ) 40 X 27 X 57 Cm (minimum) Color : Yellow With 3 Inches Non-marking Rubber Casters ""caution"" Printed In Black On Both Sides Of The Mop Bucket Smooth Surface, No Sharp Edges" 4 Pcs. "step Ladder Material: Aluminum U Channel Capacity: 250 Lbs (minimum) Type: Flatform Type Number Of Step: 6 (including Top Step) Reach Height: 6 To 8 Feet(minimum) Width: 15 Inches Minimum Spread: 4 Feet (minimum) Twin Steps With Gripped Treads To Prevent Slipping Step Braces On Top And Bottom Step Heavy Duty Aluminum Foot Bracket With Slip-resistant Foot Pad With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, Branded" 4 Pcs. "electric Vacuum Cleaner, Wet And Dry Function, Sucks Even Screws, With 4 Swivel Caster Wheels Material : Hard Plastic, (abs) Or Rust Proof Body Equivalent Power Supply : 220/240vac, 50/60hz, 1000 Watts (minimum) Auto Shut Off Tank Capacity : 20 Liters (minimum) Equipped With Complete Accessories I.e., Detachable Vacuum Hose Assembly (flexible Non-kink), Extension Tubes/wands, Carpet (long Square) Brush Nozzle, Wet And Dry Floor Brush Nozzle, Crevice Nozzle, Hepa Filter, Sponge Filter/washable Cloth Bag. Comes With 4 Meters (minimum) Heavy Duty (royal) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. The Item Must Be Branded, Brand Name And Electric Rating Permanently Mark On The Item. 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market." 4 Pcs. "washer, Laundry 1. Front Load Electric Washer, Laundry 2. Electronic Control, Digital Indicator Display , Transparent Glass Door 3. Body Material : Steel, Powder Coated, Any Color 4. Dimensions (wxdxh): 590 Mm (minimum) X 490 Mm (minimum) X 820 Mm (minimum) 5. Drum Material : Stainless Steel 6. Capacity : 8 Kg (minimum) 7. Spin Speed : 1200 Rpm (minimum) 8. Power Rating: 220 /240vac, 50/60 Hz. 9. Comes With A 1 Meter (minimum) Heavy Duty Power Cord With Male Plug To Adapt Type A Outlet (or Providing 20a Plug Adapter Is An Option) 10. Smooth Surface, No Sharp Edges 11. With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 9.includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures 12.the Item Must Be Branded, Dti-bps Certified, 1 Year Warranty Parts And Service 13. With Service Centers Located In Major Cities In The Philippines. 14.the Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market." 8 Pcs. "white Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform. Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) Wih Plastic Corner Caps Comes With Metal Tray For Marker And Eraser The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels Overall Height From Floor: 210 To 214cm Smooth Surface, No Sharp Edges"

Details: Description The Municipality Of Sibonga Through The General Fund Fy 2024 Intends To Apply The Sum Of Two Hundred Twenty-five Million Pesos Only (225,000,000.00), Construction/expansion Of Sibonga Water System (level Iii) In Barangay Lamacan, Poblacion, Lindogon, Simala, Sabang, Guimbangco-an, Candaguit, Abugon, Mangyan, Tubod, Bahay, Bagacay & Magcagong, Sibonga, Cebu, Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Each Lot. Bid Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. Work Description Quantity Unit 1. General Requirements 1.1. Mobilization/demobilization 1 Unit 1.2. Contractors Field Office 20 Months 1.3. Signages & Barricades 1 Unit 1.4. Material Testing 1 Unit 1.5. Permits & Clearance (nwrb, Ecc & Dpwh Permits) 1 Unit 1.6. Project Billboards 2 Units 1.7. Construction Health & Safety 20 Months 2. Source Development 2.1. System 1 Spring Development (lamacan) 1 Lot 2.2. System 2 (well Drilling Including Submersible Pump At Simala) 1 Lot 2.3. System 4 (well Drilling Including Submersible Pump At Abugon) 1 Lot 2.4. System 4 (well Drilling Including Submersible Pump At Sabang) 1 Lot 2.5. System 5 (well Drilling Including Submersible Pump At Bagacay) 1 Lot 2.6. System 5 (well Drilling Including Submersible Pump At Bahay) 1 Lot 3. Construction Pipes 3.1. System 1: Pipe Laying/jointing 3.1.1. Hardrock Excavation 4,364 Cu.m 3.1.2. Sand Bedding 138 Cu.m 3.1.3. 8” Pe Pipe Sdr 13.6 4,021.65 Lm 3.1.4. 6” Pe Pipe Sdr 13.6 273.54 Lm 3.1.5. 4” Pe Pipe Sdr 13.6 2,761.74 Lm 3.1.6. 3” Pe Pipe Sdr 17 4,338.11 Lm 3.1.7. 2” Pe Pipe Sdr 17 7,207.7 Lm 3.1.8. Pipe Fittings 82 Units 3.1.9. Thrust Block 5 Cu.m 3.1.10. Disinfection 18,603 Lm 3.1.11. Backfilling 3,077 Cu.m 3.1.12. Hydrotesting 18,603 Lm 3.1.13. Transporting/disposing Of Unused Materials 1,287 Cu.m 3.2. System 2: Pipe Laying/jointing 3.2.1. Hardrock Excavation 2,402 Cu.m 3.2.2. Sand Bedding 77 Cu.m 3.2.3. 6” Pe Pipe Sdr 13.6 2,918.37 Lm 3.2.4. 4” Pe Pipe Sdr 13.6 984.33 Lm 3.2.5. 3” Pe Pipe Sdr 17 5,787.26 Lm 3.2.6. 2” Pe Pipe Sdr 17 702.27 Lm 3.2.7. Pipe Fittings 24 Unit 3.2.8. Thrust Block 3 Cu.m 3.2.9. Disinfection 10,393 Lm 3.2.10. Backfilling 1,703 Cu.m 3.2.11. Hydrotesting 10,393 Cu.m 3.2.12. Transporting/disposing Of Unused Materials 699 Cu.m 3.3. System 4: Pipe Laying/jointing 3.3.1. Hardrock Excavation 6,020 Cu.m 3.3.2. Sand Bedding 163 Cu.m 3.3.3. 8” Pe Pipe Sdr 13.6 1,745.31 Lm 3.3.4. 6” Pe Pipe Sdr 13.6 7,941.85 Lm 3.3.5. 4” Pe Pipe Sdr 13.6 3,536.96 Lm 3.3.6. 3” Pe Pipe Sdr 17 3,914.56 Lm 3.3.7. 2” Pe Pipe Sdr 17 1,369.37 Lm 3.3.8. Pipe Fittings 81 Units 3.3.9. Thrust Block 5 Cu.m 3.3.10. Disinfection 18,509 Lm 3.3.11. Backfilling 4,267 Cu.m 3.1.12. Hydrotesting 18,509 Lm 3.1.13. Transporting/disposing Of Unused Materials 1,987 Cu.m 3.4. System 5: Pipe Laying/jointing 3.4.1. Hardrock Excavation 8,998 Cu.m 3.4.2. Sand Bedding 240 Cu.m 3.4.3. 6” Pe Pipe Sdr 13.6 13,745.34 Lm 3.4.4. 4” Pe Pipe Sdr 13.6 7,287.47 Lm 3.4.5. 3” Pe Pipe Sdr 17 3,303.80 Lm 3.4.6. 2” Pe Pipe Sdr 17 2,774.65 Lm 3.4.7. Pipe Fittings 49 Unit 3.4.8. Thrust Block 7 Cu.m 3.4.9. Disinfection 27,112 Lm 3.4.10. Backfilling 6,466 Cu.m 3.4.11. Hydrotesting 27,112 Cu.m 3.4.12. Transporting/disposing Of Unused Materials 2,532 Cu.m 4. Assemblies 4.1. Stub-out 4.1.1. System 1 A. 25mm Dia. 3 Set B. 50mm Dia. 8 Set 4.1.2. System 2 A. 25mm Dia. 3 Set B. 50mm Dia. 5 Set 4.1.3. System 4 A. 25mm Dia. 5 Set B. 50mm Dia. 8 Set 4.1.4. System 5 A. 25mm Dia. 3 Set B. 50mm Dia. 8 Set 4.2. 25mm Air Release Valve 4.2.1. System 1 2 Set 4.2.2. System 2 2 Set 4.2.3. System 4 8 Set 4.2.4. System 5 3 Set 4.3. Blow-off 4.3.1. System 1 150mm Dia. 1 Set 4.3.2 System 2 100mm Dia. 2 Set 75mm Dia. 3 Set 4.3.3 System 4 200mm Dia. 1 Set 150mm Dia. 2 Set 50mm Dia. 3 Set 4.3.4 System 5 150mm Dia. 2 Set 100mm Dia. 2 Set 75mm Dia. 2 Set 50mm Dia. 2 Set 4.4. Fire Hydrant 4.4.1. System 1 1 Set 4.4.2. System 2 1 Set 4.4.3. System 5 1 Set 4.5. Flow Meter / Discharge Assembly 4.5.1. System 1 1 Set 4.5.2. System 2 1 Set 4.5.3. System 4 2 Set 4.5.4. System 5 2 Set 5. Concrete Works 5.1. Reservoir 5.1.1. System 1 200 Cubic Meters 200 Cu.m 5.1.2. System 2 150 Cubic Meters 150 Cu.m 5.1.3. System 4 250 Cubic Meters 250 Cu.m 50 Cubic Meters 50 Cu.m 5.1.4. System 5 250 Cubic Meters 270 Cu.m 50 Cubic Meters 50 Cu.m 5.2. Chlorinator House Incl. Equipment 5.2.1. System 1 1 Set 5.2.2. System 2 1 Set 5.2.3. System 4 1 Set 5.2.4. System 5 1 Set 5.3. Pump Control House 5.3.1. System 2 1 Set 5.3.2. System 4 2 Set 5.3.3. System 5 2 Set 5.4. Demolition And Restoration Of Pavement 5.4.1. System 1 1 Set 5.4.2. System 2 1 Set 5.4.3. System 4 1 Set 5.4.4. System 5 1 Set 6. Power Supply; Transformer With Complete Accessories 6.1. System 2 1 Lot 6.2. System 4 2 Lot 6.3. System 5 2 Lot The Municipality Of Sibonga Now Invites Bids For The Abovementioned Procurement Project. Completion Of The Works Is Required Within Six Hundred (600) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Interested Bidders May Obtain Further Information From The Municipality Of Sibonga And Inspect The Bidding Documents Or One May Call The Secretariat At (032) 486-0551 From Monday To Friday 8:00 A.m To 5:00 P.m. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 9 – February 4, 2025 At Municipality Of Sibonga, Poblacion, Sibonga, Cebu And Upon Payment Of A Nonrefundable Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb In The Amount Of Php. 50,000.00 To The Municipal Treasurer’s Office. The Municipality Of Sibonga Will Hold A Pre-bid Conference On January 20, 2025 (10:00 A.m) At Multi-purpose Building, Bac Office, Poblacion, Sibonga, Cebu Which Shall Be Open To Prospective. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Municipality Of Sibonga, Multi-purpose Building, Bac Office, Poblacion, Sibonga, Cebu On Or Before February 4, 2025 (10:00 A.m). Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. Bid Opening Shall Be On February 4, 2025 (10:00 A.m) At Multipurpose Building, Bac Office, Poblacion, Sibonga, Cebu. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. The Municipality Of Sibonga Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.

Details: Description Invitation To Bid 1. The Provincial Government Of Misamis Oriental, Through The Lgsf-sbdp Intends To Apply The Sum Of Twenty Nine Million Nine Hundred Ninety Nine Thousand Five Hundred Sixty Seven And 18/100 (php 29,999,567.18) Being The Approved Budget For The Contract Abc To Payments Under The Contract For Water Supply And Sanitation Projects-construction Of Bulk Water Supply Project In The Barangay Of Samay , San Juan, Linabu, And Blanco, Municipality Of Balingasag, Province Of Misamis Oriental, Under Purchase No. 3498-24 Dated December 18, 2024. Description Of Works Part I. Other General Requirements B.5 Project Billboard/signboard B.7(1) Occupational Safety And Health Program B.9 Mobilization/demobilization Part Ii. Civil, Mechanical, Electrical And Sanitary/ Plumbing Works Part A. Construction Of Intake Box 900(1)c1 Structural Concrete, Class “a” (28 Days) 902(1)a1 Reinforcing Steel (deformed) Grade 40 903(2) Formworks And Falseworks 1047 Metal Structures Part B. Construc Tion Of Ground Reservoir 803(1)a Structure Excavation 804(1)a Embankment (from Structure Excavation) 804(4) Gravel Fill 900(1)c1 Structural Concrete, Class “a” (28 Days) 902(1)a1 Reinforcing Steel (deformed) Grade 40 903(2) Formworks And Falseworks 1046(2)a1 Chb Non-load Bearing (including Reinforcing Steel, 100mm) 1027(1) Cement Plaster Finish 1032(1)a Painting Works (masonry/ Concrete) Part C. Construction Of Holding Tank 803(1)a Structure Excavation 804(4) Gravel Fill 900(1)c1 Structural Concrete, Class “a” ( 28 Days) 902(1)a1 Reinforcing Steel (deformed) Grade 40 903(2) Formworks And Falseworks 1046(2)a1 Chb Non-load Bearing (including Reinforcing Steel, 100mm) 1027(1) Cement Plaster Finish 1032(1)a Painting Works (masonry/concrete) Part D. Construction Of Pressure Breaker Tank 803(1)a Structure Excavation 804(4) Gravel Fill 900(1)c1 Structural Concrete, Class “a” (28 Days) 902(1)a1 Reinforcing Steel (deformed) Grade 40 903(2) Formworks And Falseworks 1046(2)a1 Chb Non-load Bearing (including Reinforcing Steel, 100mm) 1027(1) Cement Plaster Finish Part E. Construction Of Filtration Facility 803(1)a Structure Excavation 804(1)a Embankment (from Structure Excavation) 804(4) Gravel Fill 900(1)c1 Structural Concrete, Class “a” ( 28 Days) 902(1)a1 Reinforcing Steel (deformed) Grade 40 903(2) Formworks And Falseworks 1046(2)a1 Chb Non-load Bearing (including Reinforcing Steel, 100mm) 1027(1) Cement Plaster Finish 1014(1)b1 Prepainted Metal Sheets Corrugated Type Long Span 1047(1) Structural Steel 1032(1)c Painting Works (steel) 1100 Conduit , Boxes And Fittings 1101 Wires And Wiring Devices 1102 Power Load Center, Switch Gear & Panel Boards 1103 Lighting Fixtures Part F. Water Supply 1002(1)g Galvanized Iron Pipes With Fittings 1201(12) Valves And Pipes Fittings 1600(2) Pipeline Trench Excavation 1601(1) Fill And Backfill 1602(5) Polyethylene (pe) Plastic Pipes Spl-1 Filtration System With Complete Accessories Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Misamis Oriental Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 283 Calendar Days Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instruction To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From Bids And Awards Committee Thru The Bac Secretariat At The Procurement Unit, Capitol Building, Cagayan De Oro City And Inspect The Bidding Documents At The Address Given Below During [8:00am-5:00 Pm]. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On [january 10, 2025 To January 30, 2025; 8:00-3:00 Pm] From The Given Address And Website(s) Below Bids And Awards Committee Thru The Bac Secretariat At The Procurement Unit, Capitol Building, Cagayan De Oro City And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of [php25,000.00]. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment. 6. The Provincial Government Of Misamis Oriental Will Hold A Pre-bid Conference On January 16, 2025;10:30am At The Bids And Awards Committee Office, 2nd Floor Capitol Building, Cagayan De Oro City, Which Be Open To Prospective Bidders 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Bids And Awards Committee Office, Conference Room, 2nd Floor, Capitol Building, Cagayan De Oro City On Or Before January 30, 2025;10:00am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 30, 2025; 10:30am At The Given Address Bids And Awards Committee Office, Conference Room, 2nd Floor, Capitol Building, Cagayan De Oro City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Provincial Government Of Misamis Oriental Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Ms. Jacquiline M. Noble Head, Bac Secretariat C/o Procurement Unit Capitol Building Cagayan De Oro City. Bacmisamisoriental@gmail.com Www.misamisoriental.gov.ph Filemon R. Aguilar, Jr. Bac, Chairman

Details: This Is A Sources Sought Notice Only And Is Not A Request For Proposal Or Invitation For Bid. naval Facilities Engineering Systems Command Northwest (navfac) Northwest Is Seeking Responses From Construction Firms Capable Of Performing A Design-bid-build (dbb) Construction Of A New Type Iii Pressurized Hydrant Fueling System To Support The Increased Fuel Distribution Requirements Of The P-8a Poseidon And Other Large Frame Aircraft At Naval Air Station Whidbey Island, Wa (naswi). this Contract Will Consist Of Constructing A New Aircraft Direct Fueling Hydrant System With Outlets Supporting Moveable Pantographs And Piping In Accordance With Military Petroleum Fuel Facilities Standards. The Project Will Provide An Aircraft Hydrant Fueling System With Fourteen Fueling Stations, Hydrant Loop Piping, And Pumphouse Located On The South End Of The Nas Whidbey Island (naswi) Airfield Parking Apron. The Pumphouse For The Hydrant System Will Be Located In, And Tie Into, The Existing Fuel Farm At Naswi. It Will Provide Five 600-gpm Pumps, Filter Separators, A Jockey Pump And All Related Piping, Piping Supports, Valves, And Appurtenances. The Pump House Will Contain Pump Room, Control Room, Fire Sprinkler Room, Restroom And Mechanical Room, Along With Cross Connect Fuel Transfer Piping, Emergency Shut-offs, Emergency Shower And Eyewash, Hv Ac, Fire Sprinklers, Alarms, Bridge Crane, Pump Controls, Grounding And Lightning Protection, Pump Control Systems, Emergency Fuel Shut-offs, Communications And Data Infrastructure, Leak Detection Panels And Environmental Management Control Systems Equipment. the Scope Also Includes A Pantograph Flushing Station To Maintain The Pantographs Used By The Hydrant System And Modifications To The Existing Fuel Infrastructure To Allow Rejection And Return Of Off-spec Fuel. Upgrades To Site Utilities Will Encompass Electrical, Mechanical, And Water Systems. Electrical Improvements Include Underground Connections To Tanks And Hydrant System Light Poles, The Installation Of A New Transformer, And A Standby Generator. Mechanical Enhancements Will Involve The Installation Of A Water And Fire Supply Line To The New Fuel Facility, Stormwater Infrastructure To Manage Increased Impervious Surfaces, And Demolition To Support Operational Requirements. This Project Includes Work Restrictions For Dewatering Of Ground/storm Water Requiring Containment And Disposal, And Flight Line Work Phasing. this Project Is An Integral Component Of The Fuel System Supporting The Shift From The P-3 To P-8a Aircraft Stationed Now At Naswi. An Efficient Fuel Delivery System Is Required At Naswi To Provide For The Training And Operational Fuel Support Needs Of Fleet Carrier Based Squadrons, Expeditionary Squadrons, Reserve Expeditionary Squadrons And The Fleet Replacement Squadron For Ea-18g Electronic Attack Aircraft, And Squadrons Of P-8a Patrol And Reconnaissance Aircraft Currently Assigned, And One Logistics Support Squadron And Transient Aircraft That Transit Through Naswi In Support Of Local And Other Department Of Defense Mission At Naval Air Station Whidbey Island, Wa. the Primary North American Industry Classification System (naics) Code Is 237120, Oil And Gas Pipeline And Related Structures Construction. The Small Business Size Standard Is $45m. The Planned Period Of Performance Will Be For 730 Days From Contract Award. this Project Is A Large-scale Federal Construction Project Within The United States Where The Total Estimated Cost To The Government Is $35 Million Or More And Requires The Use Of Project Labor Agreements (plas). Reference Is Made To: Far Subpart 22.5 Use Of Pla For Federal Construction Projects; Provision, Far 52.222-33 Notice Of Requirement For Pla; And To Clause, Far 52.222-34 Pla. A Request For Information (rfi)/sources Sought For The Pla Was Previously Posted To Sam.gov On August 29, 2024 Under N4425524rf016. interested Firms Are Requested To Return A Completed Response Form (attached) That Addresses The Following Criteria: type Of Business: State Whether Your Firm Is A Large Or Small Business. If A Small Business, State Whether Small, Hubzone, Small Disadvantaged, Service-disabled Veteran-owned, And/or Woman-owned. See Far Part 19 Small Business Programs For Descriptions. bonding Capability: Provide Your Firm’s Bonding Capabilities. It Is Anticipated That The Firm Awarded A Contract Under This Proposed Project Will Need A Minimum Bonding Capacity Of $45 Million. project Location: Provide Your Firm’s Likelihood To Provide A Proposal For This Project Specifically At Naval Air Station Whidbey Island (naswi) On A Scale Of 1 To 10, With 1 Being The Least Likely And 10 Being Most Likely. Provide A Statement Listing Any Past Projects At Naswi, Or A Statement Indicating No Projects Have Been Performed By Your Firm At This Location. project Experience: Provide Up To Five (5) Example Projects Which Best Demonstrate The Company’s Experience Relative To The Types Of Work Covered By This Requirement. Example Projects Are To Be Representative Of Naics 237120, And The Description Above, And Be Similar In Size, Scope, And Complexity To This Requirement. Example Projects Should Be Substantially Complete Within The Past Ten (10) Years And May Include Federal, State Or Local Government, And/or Commercial Projects. Submission Of More Than Five (5) Example Projects Is Not Requested. List Each Project By A Brief Paragraph Listing The Project Title, Location, Cost, Completion Date And How Each Project Reflects Experience In The Required Services. Again, Each Project Shall Be One Paragraph In Length. the Intent Of This Notice Is To Identify Potential Offerors For Market Research Purposes And To Determine Technical Capabilities, Bonding Capacity And Potential Set-aside Opportunities. Any Interested Firm, Including Potential Joint Ventures (jv), May Participate And Are Invited To Respond To This Sources Sought By Completing And Returning The Response Form Provided With The Announcement. respondents Will Not Be Notified Of The Results Of The Sources Sought. This Is Not A Solicitation For Proposals And No Contract Will Be Awarded From This Announcement. No Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Announcement. There Is No Bid Package Or Solicitation. No Presentations Will Be Scheduled, And Contractor Responses Will Be Provided In Writing Via E-mail As Described In This Notice. All Information Provided Will Be Held In A Confidential Manner. please Respond No Later Than 12:00 P.m. Pacific Standard Time, 25 January 2025 By Submitting An E-mail With An Attached Electronic Copy Of Your Response To: kathleen.b.maurer.civ@us.navy.mil; And jodus.d.hortin.civ@us.navy.mil; And emily.m.slate.civ@us.navy.mil please Name The Subject Line Of Your E-mail As “(insert Company Name) – P273 Bulk Fuel Storage Hydrant System – N4425525r1506”. Emails Can Be No Larger Than 5 Mb In Size. If More Than 5 Megabytes Are Needed, More Than One Email May Be Sent.