Valve Tenders

Details: Description Lot I - Airconditioning & Refrigeration Supplies 297,115.00 1 1 Tank Acetylene With Tank (new) 2 10 Length Angle Bar, 3/16" X 1/2" X 6m 3 10 Pcs Box, Surface Utility Box 4 10 Pcs Breaker, Circuit Breaker, Rail Type, 20a, With Plastic Enclosure 5 10 Pcs Breaker, Circuit Breaker, Rail Type, 30a, With Plastic Enclosure 6 10 Pcs Capacitor, Running Capacitor 40µf, 400vac 7 10 Pcs Capacitor, Starting Capacitor 100µf, 250vac 8 10 Unit Condensate Removal Pump (drain Pump), For Split Type Air Conditioning Unit, 3m Maximum Discharge Head, Capacity 400cc, Ac 220v-240v, 50/60hz, Temp. Range: 0°-50°c Max, Dimension: 18cm (l) X 12cm (w) X 14cm (h), Drain Pipe Size: Ø4.3mm X Ø6.5mm (5/32") 9 100 Pcs Expansion Bolt 3/8" X 2" 10 10 Pcs Filter Drier 1/4 (flare Type) 11 2 Roll Flexible Hose 1/2" X 100m 12 2 Set Full Body Safety Harness, Constructions Adjustable Belt With Hook, Heavy Duty 13 10 Pcs Magnetic Contactor, 30a, Single Phase, 450vac 14 1 Tank Nitrogen With Tank (new) 15 10 Pcs Outlet, 1-gang Aircon Outlet 250v/20a, Wide Series 16 50 Pcs Pipe, Red Orange Electrical Upvc Conduit Pipe 1/2" 17 2 Set Pressure Washer Pump Head W/ Accessories 18 3 Roll Pressure Washer Hose 10meters 19 5 Pcs Potential Relay A4d3 20 1 Tank Refrigerant, Freon Gas 600a 21 1 Tank Refrigerant, Freon Gas R-22 22 1 Tank Refrigerant, Freon Gas R-32 23 1 Tank Refrigerant, Freon Gas R410 (11.3kg) 24 2 Pck Access Valve 1/4" (10s) 25 10 Length Rubber Insulation 7/8" X 3/8" X 6' 26 20 Length Rubber Insulation 5/8" X 1/2" X 6' 27 2 Bottle Rugby 350ml 28 5 Roll Tape, Aero Tape (insulation Tape), 3mm Thickness, 50mm Width, 30ft Long 29 20 Pcs Tape, Electrical Tape (big) 60 Mtrs 30 3 Box Wire, Thhn Wire 2.0mm² (150m) 31 3 Box Wire, Thhn Wire 5.5mm² (150m) 32 4 Box Wire, Thwn Wire 3.5 (150m) Total For Lot I Lot Ii - Generator Set Supplies 421,200.00 1 10 Units Battery Set, Generator Battery 4d-n150l, 12v, 150ah 2 6 Units Battery Set, Generator Battery (38b19l) 12v 36ah Cca 310a 3 2 Units Battery Set, 17 Plates, 12 Volts, 100 Ah For 150 & 110kva Genset 4 10 Pail Coolant (genset) 5 2 Pcs Filter, Fuel Filter (150kva Genset) 21-1105020-937 6 2 Pcs Filter, Fuel Filter (110kva Genset) Primary-551329 7 2 Pcs Filter, Fuel Filter (110kva Genset) Secondary-553004 8 4 Pcs Filter, Fuel Filter 3329289 (fs1000) 350kva & 500kva Genset 9 2 Pcs Filter, Oil Filter (150kva Genset) L3000-1012020 Jx1023a1 Yjx-6331 10 2 Pcs Filter, Oil Filter (110kva Genset) 558615 11 2 Pcs Filter, Oil Filter 3401544 (lf9009) 350kva Genset 12 2 Pcs Filter, Oil Filter 3889310, 500kva Genset 13 2 Pcs Filter, Coolant Filter 4058965 (wf20761) 350kva & 500kva Genset Total For Lot Ii Lot Iii - Transport 125,520.00 1 1 Unit Battery, 11 Plates Battery, 12 Volts,d31l, N70zz1, Maintenance Free, L-300 Van 2 1 Unit Battery, 11 Plates Battery, 12 Volts, 380ln3, 70ah, Maintenance Free, Toyota Hiace 3 2 Unit Oil Filter Cup Remover/wrench 4 4 Pcs Filter, Oil Filter Vic C-306, (l-300 Van) 5 4 Pcs Filter, Oil Filter C-111, (commuter) 6 5 Pcs Filter, Air Filter Element 87139-06080 7 5 Pcs Filter, Air Filter Element 17801-31160 8 5 Unit Tire, Tubeless 225/70 R16 (8 Ply), Toyota Commuter Ambulance Total For Lot Iii Grand Total For Lot I, Ii & Iii 843,835.00 Documentary Requirements To Be Submitted Together With The Rfq. (non Submission Of Documentary Requirements Will Be Automatically Disqualified) • Mayor's / Business Permit • Philgeps Registration Number • Omnibus Sworn Statement • Income/business Tax Return • Delivery Period: Twenty (20) Working Days Purpose: Use For Repair And Maintenance Of Wvsgh Facilities.

Details: Description A. Concrete Works 2.1 Foundation/footing Cement Bags 120 Sand M3 15 Gravel M3 25 1.2 Beam Cement Bags 220 Sand M3 25 Gravel M3 35 1.3 Colunm Cement Bags 115 Sand M3 15 Gravel M3 25 1.4 On-grade Slab Cement Bags 250 Sand M3 25 Gravel M3 45 1.5 Stairs Cement Bags 99 Sand M3 15 Gravel M3 36 2. Reinforcement Foundation.wallforms 16mmx6m Deformed Bars Lenght 70 10mmx 6m Deformed Bars Lenght 50 #16 Tie Wire Kgs 13 2.2 Beam 16mmx6m Deformed Bars Lenght 350 12mmx6m Deformed Bars Lenght 70 10mmx6m Deformed Bars Lenght 200 #16 Tie Wire Kgs 45 2.3 Colunm 16mmx6m Deformed Bars Lenght 100 10mmx6m Deformed Bars Lenght 130 #16 Tie Wire Kgs 14 2.4 On-grade Slab 10mmx6m Defored Bars Lenght 510 #16 Tie Wire Kgs 70 2.5 Wall 10mmx6m Deformed Bars Lenght 220 #16 Tie Wire Kgs 15 2.6 Stairs 16mmx6m Deformed Bars Lenght 40 12mmx6m Deformed Bars Lenght 20 # 16 Tie Wire Kgs 5 2"x2"x12" Coco Lumber Pcs 600 1/2/" X4" X8' Ordinary Plywood Shts 90 #2.5 Cw Nails Kgs 20 #1 Fininshing Nails Kgs 10 #4 Cw Nails Kgs 30 4. Masonry Chb Pcs 10,000 Sand(mortar & Plaster) M3 15 Cement (mortar & Plaster ) Bags 325 B. Doors And Windows Double Swing Glass Window 2x2.10 Set 2 Solid Panel Door 1.80x2.10 Set 1 Solid Panel Doors 0.90x2.10 Set 2 Solid Panel Doors 0.70x2.10 Set 2 Fixed Window Glass Set 2 Fixed Window Glass Set 8 Awning Glass Window Set 2 C. Floor Tiles Ceramic Tiles Floor 60x60 Pcs 700 Tile Adhesive Bags 30 Tile Grout/white Cement Kgs 110 Cement Bags 30 D. Painting Works Wall Flat Latex Gals 45 Paint Brush #4 Pcs 10 Roller Paint 8' With Tray Pcs 10 E. Railings 2" G.i Pipe Schedule 40 Lenght 4 1" G.i Pipe Schedule 40 Lenght 11 F. Ceiling Wall Angle V-type 0.4mmx5m Lenght 95 Double Furring 0.4mmx50mmx5m Lenght 155 Carrying Channel 0.8mmx5m Lenght 120 Double Furring Clip Pcs 250 Panhead Screw 1/2 #6 Pcs 1000 Fiber Cement Board 4.5mm(siera Board) Pcs 140 Fibcem Screw 3/4 #7 Pcs 5000 G. Plumming 1/2" Dia G.i Pipe Lenght 20 1/2 " Dia G.i Union Pcs 20 1/2" Dia Gi.i Elbow Pcs 30 1/2"dia Gii Coupling Pcs 12 1/2" Dia G.i Tee Pcs 15 Gate Valve Pcs 4 4"dia Pvc Pipe Lenght 20 4 "dia Pvc Elbow 90 Degree Pcs 15 4" Dia Pvc Elbow 45 Degree Pcs 15 4"dia Pvc Wye Pcs 20 4"dia Pvc Clean Out W/ Plug Pcs 20 4 " Dia Coupling Pcs 15 4" X2" Dia Pvc Reducer Tee Pcs 15 3" Dia Pvc Pipe Lenght 15 3" Dia Pvc Elbow 90 Degree Pcs 50 3"dia Pvc Tee Pcs 20 3"dia Pvc Coupling Pcs 20 2"dia Pvc Pipe Lenght 8 2" Dia Pvc Elbow 90 Degree Pcs 20 2" Dia Pvc Tee Pcs 22 4" X2" Dia Pvc Reducer Wye Pcs 9 2" Dia Coupling Pcs 10 Pvc Solvent 400cc Cans 20 Teflon Tape 3/4 Rolls 20 H. Electrical 3.5m2 Thw 600v Mts 500 Pvc Pipe 1/2" Dia S 40 Lenght 30 Flexible Hose Mtrs 200 Entrance Cap 3/4 Pcs 2 Utility Box 2/4 Pcs 40 Junction Box 4x4 Pcs 40 Electrical Tape 3m Rolls 26 Box Type 1x 140 W Flourescent Lamp Set 15 18 W Energy Savings Lamp W/ Socket Set 4 Convenience Outlet (2 Gang( Flush Type Set 10 One Gang Switch ( Flush Type W/ Neon Light) Set 10 Three Gang Switch (flush W/ Neon Light) Set 10 Panel Board ( Main: 30at/50af 230 V 2p 60) Assy 10

Details: Description Item No. Item & Description Quantity Unit Concrete & Masonry Works 1 Porland Cement Type 1 185 Bags 2 Washed Sand 16 Cu.m. 3 Gravel 3/4" 7 Cu.m. 4 16mm X 6.0m Rsb (grade 40) 37 Pcs 5 10mm X 6.0m Rsb (grade 33) 200 Pcs 6 12mm X 6.0m Rsb (grade 33) 130 Pcs 7 # 16 Tie Wire 39 Kls 8 Chb #4 1726 Pcs 9 Coco Lumber 2" X 2" X 10" 30 Pcs 10 Coco Lumber 2" X 3" X 10" 40 Pcs 11 Cw Nails 4" 6 Kls 12 Cw Nails 2-1/2" 4 Kls 13 Cw Nails 1" 3 Kls 14 Nylon String 3 Roll 15 1/2" X 4" X 8" Marine Plywood 6 Roll 16 Bamboe Poles 30 Pcs 17 Plastic Binders 2 Rolls Steel Works & Roofing Works 18 Welding Rod 80 Kls 19 1.2mm X 2" X 3" C-purlins 32 Pcs 20 3/16" X 1" X 1" Angle Bar 14 Pcs 21 3/16" X 1" Flat Bar 23 Pcs 22 1/4" X 3" X 3" Angle Bar 16 Pcs 23 3/16" X 2" X 2" Angle Bar 13 Pcs 24 Prepainted Long Span Roofing 0.4mm X 9.4m (blue) 12 Pcs 25 Pre-painted Fascia Cover (white) 18 Pcs 26 Pre-painted End Flashing (blue) 10 Pcs 27 Tekscrew 2" 900 Pcs 28 Tek Screw Adaptor 6 Pcs 29 Steel Brush 3 Pcs 30 Epoxy Metal Primer (gray) 6 Pcs 31 Epoxy Reducer 2 Pcs 32 Cut Off Disc 14" 5 Pcs 33 Cutting Disc 4" 20 Pcs Painting Works 34 Flat Wall Latex 11 Gal 35 Semi Gloss Latex 22 Gal 36 Skim Coat 8 Bag 37 Sand Paper 50 Pcs 38 Pain Brush 2 1/2" 4 Pcs 39 Baby Rollers W/pan 4 Pcs Doors And Windows 40 Loose Pin Hinges 2" X 4" 2 Pcs 41 Door Knob Heavy Duty 3 Pcs 42 0.6m X 2.1m Pvc Door With Louver 1 Set 43 0.9m X 2.1m Wooden Panel Door With W/2" X 5" Door Jamb 2 Set 44 1/4" Thk Glass Sliding Window On Aluminum Frame 143 Sqft Tile Works (2nd Floor) 45 60cm X 60cm Glazed Tiles (multi Purpose Area & Office 148 Pcs 46 60cm X 60cm Glazed Tiles (wall) 16 Pcs 47 60cm X 60cm Non-skid Tiles (cr Floor) 8 Pcs 48 Tiles Adhesive 11 Bag 49 Grout 5 Kls Electrical Works 50 Panel Board (60a-main, 1-20a, 3-30a) 1 Set 51 Flexible Hose 3/4 1 Roll 52 Led 12w Watts Bulb W/ Receptacle 6 Pcs 53 2.0mm² Tth Wire 1 Roll 54 3.5mm² Tth Wire 1 Roll 55 5.5mm² Tth Wire 40 I.m. 56 8.0mm² Tth Wire 40 I.m. 57 Electrical Tape (big) 3 Rolls 58 Double Conv. Outlet (flush Type) 4 Pcs 59 1-gang Switch (flush Type) 3 Pcs 60 2-gang Switch (flush Type) 1 Pcs 61 Junction Box 4" X 4" W/ Cover 6 Pcs 62 Utility Box 2" X 4" Pvc 8 Pcs 63 1/2" Pvc Electrical Conduit Elbow (orange) 10 Pcs 64 1/2" Pvc Electrical Pipe (orange) 15 Pcs Plumbing Works 65 Water Closet W/ Fittings 1 Set 66 Lavatory W/ Fittings 1 Set 67 Stainless Floor Drain 4" X 4" 1 Pcs 68 4" Pvc Pipe S-900 5 Pcs 69 4" Pvc Elbow 90° 4 Pcs 70 4" Pvc Elbow 45° 3 Pcs 71 4" Pvc Wye 1 Pcs 72 4" Pvc Tee 8 Pcs 73 4" Pvc Clean Out 2 Pcs 74 2" Pvc Pipe S-900 5 Pcs 75 2" Pvc Elbow 90° 4 Pcs 76 2" Pvc Tee 5 Pcs 77 2" Pvc Wye 3 Pcs 78 2" Pvc P-trap 1 Pcs 79 1/2" Diameter Pvc Blue 8 Pcs 80 1/2" Pvc Ball Valve 1 Pcs 81 1/2" Pvc Elbow 90° 5 Pcs 82 1/2" Pvc Tee 12 Pcs 83 Solvent Cement 400cc 2 Cans 84 Teflon Tape 3 Pcs

Details: Description Supply And Delivery Of 4 Units Four-wheel Drive Tractor Abc: P19,600,000.00 A. Prime Mover - Rated Power: 67.14 Kw Hp, Minimum - No Of Cylinder: 4 Cylinder - Stroke And Cycle: 4 Stroke Cycle - Cooling System: Water-cooled - Fuel Injection System: Direct Injection - Fuel Ignition/fuel: Diesel B. Performance/classification - Hitch Category: Category 2&3 - Hydraulic Lift: 15 Kn, Minimum - Pto Power: 85% Of The Engine's Maximum Power, Minimum - Specific Fuel Consumption @ Max. Pto Power: 280g/kw-hr, Maximum - Aspiration Method: Turbocharged - Steering System: Hydraulic Power/full Hydrostatic - Steering System: Hydraulic Power/full Hydrostatic - Transmission System: 8f/2r, With Differential Lock - Brake System: Hydraulic/mechanical - No. Of Drive: 4 Wheel Drive - Noise Level: 90db (a), Maximum C. Accessories - With Roll Over Protective Structure (rops), Seatbelt, Canopy, Three-point Linkage: Category 1, Pto Casing/cover - With Set Of Heavy Duty Tools: A. One (1) Set Of Open Wrench (size:6-32mm, Minimum) B. (for Items B, Which Ever Is Compatible To The Offered Units) One (1) Set Allen Type Wrench (for Star And Hexagon) / One (1) Piece Each Or Combination Of Philips And Flat Screw Driver C. One (1) Pair Of Mechanical Pliers D. One (1) Piece Adjustable Wrench (size:12, Minimum) E. One (1) Piece Grease Gun (100cc, Minimum) F. One (1) Piece Tire Wrench (compatible To The Offered Units, At Least 2 Different Sizes) G. One (1) Piece Hydraulic Jack - With Heavy-duty Toolbox That Can Accommodate All Of The Abovementioned Items Except Hydraulic Jack And Tire Wrench. - With Original Equipment Manufacturer (oem) Manual - With Slow Moving Emblem At The Back Of The Tractor - With Early Warning Device - Hydraulic Control Valve: Auxillary Or Integral D. Implement Disc Plow: - Width Of Cut:1,100mm, Minimum - No. Of Disc/blade: 4 - Average Depth Of Tillage: 190 Mm, Minimum - Actual Field Capacity: 0.4 Ha/hr, Minimum - Diameter: 26 Inches - Field Efficiency: 85%, Minimum - Fuel Consumption: 11l/hr, Maximum Harrow: - Average Width Of Tillage: 1700 Mm ,minimum - No. Of Disc/blade: 20, Minimum - Actual Field Capacity: 1 Ha/hr, Minimum - Diameter Of Blade: 24 Inches, Minimum - Field Efficiency: 90%, Minimum Trailer: - Capacity: 5 Tons, Minimum - Tire: 7.5x16, 8pr, Pneumatic, Must Be Manufactured Not Earlier Than Year 2024 - Dimension: 10 Ft X 6ft X 2ft (lxwxh) - Rim: Ring-lock Type - Tow Bar Is Parallel To The Ground When Attach To Tractor Hitch With Tailgate - With Leaf Spring Suspension Corn Seeder With Fertilizer Applicator - Effective Field Capacity: 0.75ha/hr, Minimum - Seeding Rate: 20 Kg/ha, Minimum - Mechanism: Pneumatic - No. Of Rows : 4 Rows, Minimum - With Adjustable Hill/row Spacing And Depth Hill Spacing At Least 15-30 Cm Row Spacing :70+- 10 Cm - Missing Hills: 8%, Maximum - With Replaceable Seed Plates: 2 Sets, Minimum E. Warranty: 1 Year Warranty On Parts And Services And Two (2) Years On The Engine F. Other Requirements: - With Da Logo (all Weather Type Sticker (vinyl Sticker), 10 Inches In Diameter) - With Amtec Test Result For Tractor Alone - With Amtec Test Result For Disc Plow Coupled With Tractor - With Amtec Test Result For Disc Harrow Coupled With Tractor - With Amtec Test Result For Corn Seeder With Fertilizer Apllicator Coupled With Tractor - With Certificate Of Conformity For Tractor - With Namdac Certificate - With Pto Certificate By Bafe - Materials And Other Components Shall Be All Brand New - Shall Provide Diesel Fuel (at Least Half Of Tank Capacity) And Engine Oil In Every Units - Specification Should Be Signed And Sealed By An Abe With Valid Prc Id And Ptr - Bidder Should Have Service Center (owned And Managed) Within Region12 - The Technicians Of The Mfaddies And Or Its Accredited Service Center Must Have A Tesda National Certificate Ii(ncii) Relevant To The Job Or An In House Training. - No Reported Major Breakdown For Products Under Warranty In The Last 72 Hours Upon Receipt Of Complaint/s - Control Instructions And Label Of The Machine & Engine Should Be In English - Must Conduct Training In Operations And Maintenance On Recipient/s D. Warranty - One (1) Year For Machine And Two (2) Years For The Engine Delivery Period: 45 Calendar Days Delivery Sites: Da Tupi Res, Tupi, South Cotabato Note: All Units Shall Be Inspected @ Da-tupi Res, Including The Conduct Of Acceptance Testing & Operations And Maintenance Training To The Recipient. Units Must Be Delivered To The Recipients (see Annex A) After The Conduct Of Operation And Maintenance Training. Cost Of Bidding Documents: P25,000.00 1. During Buying Of Bidding Document: Must Submit Letter Of Intent (loi) And Present The Following Eligibility Document: A. Certificate Of Registration From Philgeps (platinum Membership) B. Registration Certificate From Sec/dti/cda C. Mayor/business Permit D. Tax Clearance 2. In Case Of Representative: Must Submit A Copy Of Board Resolution Or Secretary’s Certificate/special Power Of Attorney Whichever Is Applicable Coupled With Specimen Signature.

Details: This Is A Sources Sought Notice Only. This Is Not A Solicitation Or A Request For Quotation (rfq) And No Contract Or Purchase Order Will Be Awarded From This Notice. There Is No Solicitation, Specifications Or Drawings Available At This Time. military Sealift Command (msc) Is Seeking Eligible Businesses For The Regular Overhaul And Dry Docking (roh/dd) Of The Usns Kanawha (t-ao 196) Commencing On Or About 15 March 2025 For A Period Of One Hundred One (101) Calendar Days. The Usns Kanawha Has An Overall Length Of 677 Ft 6 In, A Beam Of 97 Ft 6 In And A Draft Of 36ft. Work Is To Be Performed At The Contractor’s Facility On Or About The Above-mentioned Dates. Area Of Consideration Is East/gulf Coast. The Estimated Issue Date Of The Solicitation Is On Or About 15 August 2024. major Work Items Associated With This Availability Include: General Services For Ship, Clean And Gas Free Tanks, Voids, Weather Deck Non Skid Renewal, Tao187-csi-tank Deck Overhead Preservation, Tank Repairs From Abs Inspections, Cargo Tank Preservation, Tao187-swi-clean And Gas Free Tanks Voids Cofferdams And Spaces (single Hull Only), Ssdg Engine Service - Bergen (80k Hrs) (scsi), Replace Afff Weather Deck Piping - Zone 3, Heavy Oil Equipment Removal (talt 0852), Lifeboat And Davit Service And Inspection (5 Yr) (ccsi), Drydocking And Undocking The Vessel (2.5 Yr) (ccsi), Propeller Maintenance And Hub Replacement, Overhauling Sea Valves (5 Yr) (ccsi), Underwater Hull Cleaning And Painting - Spot Blast (5 Yr) (ccsi), Freeboard Preservation (2.5 Yr) (ccsi), Unrep Station No 6 Steel Repairs, Hp Air Flask Inspection And Preservation (15 Yr) (csi) after Issuance, Solicitation And Supporting Documents Will Be Made Available On The Sam Website Https://www.sam.gov, As Well As The Piee Module. All Small Businesses, Service-disabled Veteran-owned Small Businesses, Certified Hubzone And Certified 8(a) Small Businesses Are Encouraged To Respond. The Government Will Determine Whether A Set-aside Acquisition In Lieu Of Full And Open Competition Is In The Government’s Best Interest. This Office Anticipates Award Of A Contract On Or About 14 January 2025. The Appropriate Naics Code Is 336611. This Is A Market Research Tool Used To Determine The Availability And Adequacy Of Potential Small Business Sources Prior To Determining The Method Of Acquisition And Issuance Of An Award. The Government Is Not Obligated To And Will Not Pay For Any Information Received From Potential Sources As A Result Of This Sources Sought. It Is Requested That Interested Businesses Submit To The Contracting Office A Brief Capabilities Package Demonstrating Ability To Provide The Requested Items. This Document Shall Provide At A Minimum The Following: company Profile To Include Number Of Employees, Office Location(s), Duns Number, Cage Code And A Statement Regarding Small Business Designation the Facility Where The Work Will Be Performed partnership, Teaming, Joint-ventures Or Mentor Agreements With Any Large Businesses. submission Of A Capabilities Statement Is Not A Prerequisite To Any Future Offerings But Participation Will Assist The Government In Tailoring The Requirement To Be Consistent With Industry. responses Are Due No Later Than 05 July 2024 At 4:00 Pm Eastern Standard Time. Responses Shall Be Sent Via Email Directly To Marcin.krauze.civ@us.navy.mil. Mailed Submissions Of The Capabilities Package Will Not Be Accepted.

Details: Advertisement For Bids St. Bernard Parish Government Department Of Public Works State Of Louisiana Project No.: Dwrlf-3002 Sealed Bids Will Be Received Until The Hour Of 2:00 P.m., On Thursday, December 12, 2024, At The St. Bernard Parish Government Department Of Public Works, 1125 E. St. Bernard Highway, Chalmette, Louisiana, And Opened At 2:00 P.m., At Which Time They Will Be Publicly Read, For Furnishing All Supervision, Labor, Materials, Equipment, Etc., And Performing All Work Necessary For: St. Bernard Dwrlf Project 3.2 – High Service Water Pump Project No.: Dwrlf-3002 To Be A Valid Delivery, Sealed Bids Must Be Delivered Electronic By Central Bidding Or By Hand To St. Bernard Parish Government Department Of Public Works, 1125 E. St Bernard Highway, Chalmette, Louisiana During The Normal Business Hours Of 8:30 A.m. To 4:30 P.m. Monday Through Friday On Or Before 2:00 P.m., Thursday, December 12, 2024. Sealed Bids Delivered To Any Other St. Bernard Parish Government Location Or Other Room Number Prior To The Bid Receipt Deadline Will Not Be Considered. This Project Consists Of Furnishing All Supervision, Labor, Equipment, And Materials Necessary To Install A New High Service Water Distribution Pump Along With Associated Valves, Ductile Iron Piping & Fittings, Electrical Controls, And Site Paving. Each Bid Must Be Accompanied By A Certified Check, Cashier's Check Or Bid Bond Acceptable To The Owner In The Amount Equal To At Least Five Percent (5%) Of The Total Amount Bid And Payable Without Condition To The Owner As A Guarantee That The Bidder, If Awarded The Contract, Will Promptly Execute A Contract In Accordance With All Terms And Conditions Of The Contract Documents. A Pre-bid Conference Will Be Held On Monday, December 2, 2024 At 2:00 P.m., At The St. Bernard Parish Government Department Of Public Works, 1125 E. St Bernard Highway, Chalmette, Louisiana. All Bidders And Sub-contractors Are Encouraged To Attend. The Drawings And Specifications Are On File And Open For Inspection At The St. Bernard Parish Government Department Of Public Works, 1125 E. St Bernard Highway, Chalmette, Louisiana, And May Be Secured From The Office Of Gis Engineering, Llc, 935 Gravier Street, Suite 600, (504) 367-4988, By Only Licensed Contractors Upon Payment Of $100.00 Cost Per Set. Questions About This Procedure Shall Be Directed To The Architect/engineer. Bids May Also Be Viewed And Submitted Online At Www.centralauctionhouse.com. Equal Opportunity In Employment: All Qualified Applicants Will Receive Consideration For Employment Without Regard For Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Genetics, Disability Or Veteran Status. Bidders On This Work Will Be Required To Comply With The President’s Executive Order No. 11246, As Amended. The Requirements For Bidders And Contractors Under This Order Are Explained In The Specifications. St. Bernard Parish Government Is An Equal Opportunity Employer. St. Bernard Parish Government Also Encourages All Small And Minority-owned Firms And Women’s Business Enterprises (dbe’s, Including Mbe’s, Wbe’s And Sbe’s) To Apply. /s/hillary J. Nunez, Jr. Hillary J. Nunez, Jr. Director Department Of Public Works

Details: Description 1 Unit Ambulance Dimension & Height: Overall Dimension (mm) 5265 X 1950 X 1990, Wheel Base (mm) 3210, Seating Capacity 15. Engine: Engine(cc)type 4 Cyclinder, In-line Type 16-valve Dohc, Engine Displacement(ps/rpm) 2,755, Maximum Output (ps/rpm) 176ps/3,400 Rpm, Maximum Torque(nm/rpm) 420 Nm/1,400- 2,600 Rpm, Fuel Type Diesel, Fuel Capacity(l) 70. Transmission: Transmission Manual, Power Transmission 6-speed Manual. Exterior Head Lamps Bi-beam Multi-reflector Halogen With Intergrated Turn Lamp, Front Foglamps Headlamp Intergrated, Function: Power Window With (driver/front Passenger Auto Up-down) Power Door Lock 1, Power Outer Mirrors Adjust + Retract, Chassis: Front Brake/rear Brake Ventilated Discs/ Drum, Tires 215/70 R16c, Wheels(size) 7.1 X 16", Wheels Steel With Full Cap. Safety And Security: Seatbelts Rear 2 Pt. Nr (12pcs), Alarm With Immobilizer. Others: Antenna Short Pole, Meter Gauge Analog, Airconditioning Dual, Front Manual Control, Audio 2-din Cd/ Tuner/mp3/aux/usb/bt, Speakers 4, Steering Wheel 4-spoke, Urethane With Chromes Loop, Steering Column Manual Tilt And Teloscopic Adjustable, Shift Level Knob Urethane Dash-mounted, Power Steering Variable Power Steering, With Srs Driver Passenger, With Anti Lock Break System. Ambulance Equipment: Installed Toplight W/ Siren- Tbd4126 Red/blue, Construct Medical Floor Mounted Cabinet 3 Layer, Installed Fully Collapsible Stretcher W/ Locking Mechanism. Consumables: Oxygen Tank W/ Content 20 Lbs, Wall Mounted Bp Apparatus, First Aid Kit, Oxygen Tank Regulator, Ambubag Combination Adult And Pedia, Minor Surgical Kit, Flash Light Led, Battery, Spineboard Holder. Others: Installed: Fire Extinguisher, Florescent Lamp. I.v. Hook W/ Strap, Single Oxygen Tank Holder, Vinyl Sticker (4 Side Ambulance Name) Checkered Matting, Stainless Bumper Approach, Stainless Lamp Approach, 2 Seater W/ Storage W/ Seatbelt But W/ Backrest, 3 Seater W/ Storage, Seatbelt & Backrest, Acrylic Divider, Tint (black) Lto Registration, Insurance & Tpl. Procurement Of Ambulance Vehicle For Mddrmo Pb 2024-42 1. The Local Government Of Dinalupihan, Through The Local Government Unit Operating Budget 2024 Intends To Apply The Sum Of Two Million Four Hundred Thousand Pesos Only (php2,400,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of Ambulance Vehicle For Mdrrmo. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Of Dinalupihan Now Invites Bids For Procurement Of Ambulance Vehicle For Mdrrmo. Delivery Is Upon Availability Of Unit Including Accessories Stated On Specification Or Maximum Of Thirty Days (30) Days. The Prospective Bidder Must Have Completed, Within The Period Specified In The Invitation To Bid, An Slcc That Is Similar To The Contract To Be Bid, And Whose Value, Adjusted To Current Prices Using The Philippine Statistics Authority (psa) Consumer Price Indices, Must Be At Least Fifty Percent (50%) Of The Abc. 38 Refer To Appendix 9 For The Guidelines In The Determination Of Eligibility Of Foreign Suppliers, Contractors, And Consultants To Participate In Government Procurement Projects. The 2016 Revised Implementing Rules And Regulations 61 However, In The Case Of Expendable Supplies, Said Slcc Must Be At Least Twenty Five Percent (25%) Of The Abc. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 5. Prospective Bidders May Bring Letter Of Intent To Obtain And Acquire Bidding Documents At Municipal Accounting Office, 2nd Flr. Municipal Building, San Ramon, Dinalupihan, Bataan From Eight O’clock In The Morning Until Four O’clock In The Afternoon. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 21, 2024 And Payment Of A Nonrefundable Fee In The Amount Of Five Thousand Pesos (php5,000.00). 6. Pre-bid Conference Will Be Held On November 28, 2024 At 10:00 In The Morning At Bac Office 2nd Floor Municipal Bldg, Dinalupihan, Bataan. 7. Bids Must Be Duly Received By The Bac Secretariat To The Address Below On Or Before December 10, 2024 At 10:00 In The Morning. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be On December 10, 2024 At 10:00 In The Morning At Bac Office 2nd Floor Municipal Bldg, Dinalupihan, Bataan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. All Necessary Documents Must Be Submitted On Date/time As Stated On The Bidding Documents. The Lgu Of Dinalupihan Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Emilia V. Carpio Bac Chairman San Ramon, Dinalupihan, Bataan Tel. No. (047) 240-9040

Details: Description Invitation To Apply For Eligibility And To Bid The Bids & Award Committee Of The Municipality Of Caibiran, Biliran Is Inviting All Interested Bidders On Its Forthcoming Public Bidding For: Project Title : Purchase Of Recue Equipment Location : Mdrrmo, Lgu Of Caibiran, Biliran Delivery Period : 20 W.d. Abc : P500,000.00 Source Of Funds : 70% Drrmf 2024 All Particulars Relative To Eligibility Statement And Screening, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provision Of R.a 9184 And Its Revised Implementing Rules And Regulations (rirr) Item No. Unit Item Description Quantity 1 Unit K12 Rescue Saw 1 Specifications: • 95cc/6-horsepoer 2 Cycle Engine • Active Filtration • Smart Carb Carburetor • Decompression Relief Valve • Starter Unit • Enclosed Transmission 2 Unit Chipping Hammer 2 Specifications: • Impact Energy: 28.8 J • Continuous Power Input: 1,510 W • Impacts Per Minute: 1,450 W 3 Unit Chainsaw 4 Specifications: • Power Source: Gas • Powerhead Weight: 10.1 Lbs • Guide Bar Length: 18 In. • Oilomatic Chain: .325” Rm3 • Engine Power: 3.0 Bhp • Fuel Capacity: 15.9oz • Displacement: 45.4 Cc 4 Lot Collapsible Emergency-rescue Tent 2 Specifications: • Width: 4 Meters • Length 5 Meters • Wall Height: 2.5 Meters • Top Height: 3.5 Meters • Fabric: 600d Oxford Out Cover, 210d Pvc • Inner Layer, Removable 0.45mm Pvc - With Full (4) Windows With Outer Cover - With One (1) Door With Outer Cover And 5 Pcs Rescue Carabiner 20 Specification: • D-shape • Stainless Steel 6 Pcs Rescue Pulley (single) 8 Specifications: • Rope Compatibility: 7- 13 Mm Diameter • Sheave Diameter: 38 Mm • Weight: 144 G • Mbs: 2 X 18 Kn = 36 Kn • Wll: 2 X 4 Kn = 8 Kn • With Certifications 7 Pcs Rescue Pulley (double) 8 Specifications: • Rope Compatibility: 7 -13 Mm Diameter • Sheave Diameter: 38 Mm • Weight: 254 G • Mbs 4 X 9 Kn - 36 Kn • Wll: 4 X 4 Kn – 16 Kn • With Certifications 8 Pcs Rescue 8 Descender 5 Specifications: • Stainless Steel Schedule Of Activities: (1st Posting) Advertisement : November 14, 2024 To November 21, 2024 Bid Evaluation : November 25, 2024 (9:00 Am At The Office Of The Bac Chairman, Municipal Hall Caibiran, Biliran) 1. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Aon-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. 2. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 15, 2024 Until November 22, 2024, Upon Payment Of The Applicable Fee From The Municipal Treasurer, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos. [p500.00] 3. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) Or To The Associated Components Of The Invitation To Bid Provided That Bidders Shall Pay The Applicable Fee Not Later Than The Submission Of Their Bids 4. Bids Must Be Duly Received Together With Official Receipt (o.r.) Issued By The Mun. Treasurer To The Bac Secretary Or To The Bac Chairman On Or Before November 25, 2024 At 9:00 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In The Itb. 5. Bid Evaluation Shall Be On November 25, 2024 At Exactly 9:00 Am At The Office Of The Bac Chairman, Municipal Hall, Caibiran, Biliran. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 6. The Lgu Caibiran Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 7. Checklist Of Eligibility Requirements For Goods Is Hereto Attached: First Envelope (technical Proposal) Note: All Document To Be Submitted To The Bac Must Be Alphabetically Tabbed According To The Technical Proposal (1st Envelope) & Financial Proposal (2nd Envelope) Eligibility Requirements: Class A Documents 1. Philgeps Platinum Registration In Lieu Of Class A Eligibility Documents Under Section 23.1 (a) & 24.1 (a) All Bidders Shall Upload & Maintain In Philgeps A Current & Updated File Of The Following Class A Eligibility Documents: A. Dti/sec/cda Registration B. Mayors Business Permit Or Its Equivalent Documents C. Tax Clearance Per Executive Order 398 Series 2005 As Finally Reviewed & Stamp Approved By The Bir D. Audited Financial Statement 2. Statement Of On-going Contracts 3. Statement Of Single Largest Completed Contract (slcc) 4. Nfcc Computation Of Committed Line Of Credit Class B Documents 1. Jva Or Notarized Statement From The Partners That They Will Enter Into Joint Ventures If Awarded The Contract. 2. Bid Security (form Of Bid Security) 3. Production Delivery Schedule 4. Manpower Requirement 5. After Sales Service/parts, If Applicable 6. Omnibus Sworn Statement In The Prescribed Form Note: Any Missing, Incomplete Or Potentially Insufficient Document In The Above-mentioned Checklist Is A Ground For Outright Rejection Of The Bid. Second Envelope (financial Proposal) 1. Financial Bid Form (include Bid Prices & Bill Of Quantities, As Well As Applicable Price Schedule) 2. Certification If Claiming Preference As Domestic Bidder 3. Other Documents Required In The Bidding Documents Note: Any Missing, Incomplete Or Potentially Insufficient Document In The Above-mentioned Checklist Is A Ground For Outright Rejection Of The Bid 2024philgeps131

Details: Description Section I. Invitation To Bid Reference No.: Da8-infra-2025-01 (pr No. Bt-25-infra-39835-0006) 1. The Department Of Agriculture-regional Field Office No. 8, Through The Rice-2025 Current Fund Intends To Apply The Sum Of Six Million Nine Hundred Twenty-nine Thousand Four Hundred Ninety-five Pesos And 09/100 Only (p6,929,495.09) Being The Approved Budget For The Contract (abc) To Payment For The “supply Of Labor And Materials For The Construction Of Binongto-an Solar Powered Irrigation System (spis) Located At Brgy. Binongto-an, Tanauan, Leyte.” Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture-regional Field Office No. 8, Undertakes The Bidding Of This Procurement Project As “short-of-award.” Hence, The Notice Of Award To The Winning Bidder Shall Be Issued After Enactment By The Congress Of The General Appropriation Act (gaa) For 2025. 3. The Department Of Regional Field Office Viii Now Invites Bid For The Above Procurement Project. Completion Of Works Is Required Within One Hundred Two (102) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii: Instruction To Bidders Qty Unit Desription Estimated Total Cost Supply Of Labor And Materials For The Construction Of Binongto-an Solar Powered Irrigation System (spis) Located At Brgy. Binongto-an, Tanauan, Leyte 6,929,495.00 Scope Of Work: 60.93 Cu.m. Levelling Course 30 L.m 6" Diameter Hdpe Pipe 87 L.m 1" Diameter Galvanized Iron Pipes 56 L.m 1.5" Diameter Galvanized Iron Pipes 6 L.m 3" Diameter Galvanized Iron Pipes 1 L.s Doors And Frame 2 Cu.m. Removal Of Structure And Obstruction 1 L.s Fabricated Metal Roofing Accessories 1 L.s Prepainted Metal Sheets (corrugated) 28 Sq.m. Cement Plaster Finish 28 Sq.m. Painting Works 68 Sq.m. Masonry Works 1 L.s Structural Steel Roof Framing 1 L.s Valves And Pipe Fittings 12.86 Cu.m. Concrete Class "a" ( W/ Forms ) 7.75 Cu.m. Concrete Class "a" ( W/o Forms ) 66.4 Cu.m. Concrete Class "b" ( W/ Forms ) 52.83 Cu.m. Concrete Class "b" ( W/o Forms ) 6 L.m Rc Pipe Culvert (610 Mm Diameter) 350 Sq.m. Clearing And Grubbing 276.2 Cu.m. Structure Excavation 116.75 Cu.m. Embankment Fill (from Structure Excavation) 10391 Kgs. Reinforcing Bars 1 Lot Provision Of Concrete Project Marker 2 Each Project Billboard/signboard 1 L.s Occupational Health And Safety Program 1 Lot Mobilization & Demobilization 1 L.s Construction Of Camp And Other Temporary Facilities 1 L.s Aluminum Solar Frames 1 Assem Lightning Arrester (including Accessories And Wires) 86 L.m 3" Cyclone Wire 86 L.m 2 Strands Barbed Wire 1 Assem Trashrack 48 Pc Solar Modules (including Wiring) Specifications: Peak Power : 550 Watts, Minimum Cell Type: Monocrystalline Efficiency: At Least 21% Mechanical Performance 5400 Pa Positive Load, Minimum 2400 Pa Negative Load, Minimum Should Pass The Following International Electrotechnical Commission (iec) Or Tuv Certification Equivalent Iec 61215 (mechanical Load, Climate, And Electrical Test) Iec 61701 (salt Mist Corrosion Test) Iec 61730 (pv Module Safety) Potential Induced Degradation (pid) Resistance Manufactured In Iso 9001 Certified Factories 1 Set Pump Set (solar Pump And Inverter/controller With Wiring) Specifications: 1. Solar Pump Built In Motor Power: 18500 Watts, Minimum Tota Dynamic Head (tdh): 15 Meters, Minimum Type: Submersible Pump Discharge, Cu.m Per Day: 1200 Cu.m Per Day, Minimum With Return Valve Material: Stainless Steel Insulation Class: F Enclosure Class: Iec 34-5 Iso 5199 2. Inverter/controller Power: 22000 Watts, Minimum With Dry Run Protection Frequency: Variable Protected Against Reverse Polarity,overload, And Overtemperature Integrated Mppt (maximum Power Point Tracking) Ac/dc Compatible Enclosure Class: Ip65 Accessories: Level Switch/float Switch Discharge Meter Terms And Conditions: A During The Opening Of Bids, Bidders Shall: 1 Submit Certificate Of Project Site Inspection Issued By Farmer’s Association Or Barangay Officials Or Affidavit Of Site Inspection; 2 Submit Certificate Of Compliance To The Attached Drawings Duly Signed By The Bidder’s Authorized Representative And Signed And Sealed By A Licensed Agricultural Engineer/ Agricultural And Biosystems Engineer; B All Participating Bidder Must Comply With Section B Of Dpwh D.o. No. 197 Series Of 2016, Particularly In The Computation Ocm & Profit Of The Bid Amount. Use 12% For Vat Mark-up C During Post-qualification Evaluation 1 In Case Of Recomputed Bid, Bidder Shall Submit Its Revised Cost Estimates 2 Submit Pert/cpm And S-curve 3 Construction Methods 4 Manpower Schedule 5 Major Equipment Schedule 6 Provide Contractor's All Risk Insurance (cari) 7 Submit Plans, Design, And Specification Signed And Sealed By A Licensed Agricultural Engineer/ Agricultural And Biosystems Engineer; D Winning Bidder Shall: 1 Commence Construction Works Within Seven (7) Days Upon Receipt Of Notice To Proceed (ntp); 2 Complete The Construction Within 102 Calendar Days; 3 Provide Necessary Tools For The Satisfactory Completion Of The Project; 4 Assume Full Responsibility From The Time Project Construction Commences Up To The Final Acceptance By Darfo 8 And Shall Be Held Responsible For Any Damage In Part Or In Whole Except Those Occasioned By Force Majeure; 5 Assign A Project Engineer (either Licensed Agricultural Engineer Or Civil Engineer) That Will Oversee The Daily Construction Activities On Site; 6 Comply With The Quality Control Program (qcp) Schedule Of Minimum Testing Requirements Of The End-user; 7 Submit Material Test Report Or Its Equivalent Standard Certificate For Aggregate (sand & Gravel), And Cement 8 Submit Material Test Result From Accredited Testing Laboratory For Concrete, And Reinforcing Bar With Geotagged Photos 9 Attend Pre-construction Meeting. 10 In Case Of Time Extension Due To Unworkable Weather Condition, Submit The Request With Pag-asa Weather Report And On-site Weather Chart Within The Succeeding Month. 11 Secure And Facilitate The Necessary Permits Required For The Project Implementation. 12 Strictly Observe Construction Safety Rules And Health Program Approved By Department Of Labor And Employment (dole) During Project Implementation. E Any Delay In The Project Completion Shall Be Subjected To Liquidated Damages Equivalent To At Least 1/10 Of 1% Of The Cost Of The Unperformed Portion Of The Works For Everyday Of Delay F Be Paid Through Partial Billing Based On Validated/verified Statement Of Work Accomplishment (swa) With Geo-tagged Photos On Major Works (before, During, And After) And Inspection Report By The Da-rfo8 Inspectorate Team. 1 At Least 30% Of The Physical Accomplishment; 2 At Least 50% Of The Physical Accomplishment; 3 At Least 75% Of The Physical Accomplishment, And; 4 100% Of The Physical Accomplishment, Testing And Acceptance Of The Project G Advance Payment (maximum Of 15%) Will Be Granted Upon Submission Of The Following Requirements: 1 Advance Payment Bond By The Bidder 2 On-site Evaluation Report By The Da Project Engineer H Winning Bidder Shall Submit A Snapshot Of A Business Bank Account (preferably Landbank) To Effect Payment. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 5. Interested Bidders May Obtain Further Information From Department Of Agriculture – Regional Field Office 8 And Inspect The Bidding Documents At The Address Given Below During Office Hours, From 8:00 Am To 5:00 Pm 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 09 To December 3, 2024 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents Amounting To Ten Thousand Pesos Only (p10,000.00), Pursuant To The Latest Guidelines Issued By The Gppb. 7. The Department Of Agriculture-rfo 8 Will Hold A Pre-bid Conference On November 19, 2024, 9:00 Am At Bac Office, Da-rfo8, Kanhuraw Hill, Tacloban City Through Face To Face Or Videoconferencing/webcasting Via Google Meet, Which Shall Be Open To Prospective Bidders. 8. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before December 03, 2024, 9:00 Am (bac-secretariat Time). Late Bids Shall Not Be Accepted. 9. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 10. Bid Opening Shall Be On December 03, 2024, 9:00 Am (bac-secretariat Time) At Da8 Bac Office, 4th Floor Green Bldg., Kanhuraw Hill, Tacloban City Through Face To Face Or Videoconferencing/webcasting Via Google Meet. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 11. The Department Of Agriculture-rfo 8 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Da Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 13. For Further Information, Please Refer To: Martins A. Alde Head, Bac-secretariat Department Of Agriculture, Regional Field Office-8 Kanhuraw Hill, Tacloban City Darfo8.bacsec@gmail.com Landline No. (53)832-0834 Mobile No. 09061694318 Easternvisayas.da.gov.ph 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph Or Easternvisayas.da.gov.ph Approved By: (sgd.) Larry U. Sultan Chairman, Bids And Awards Committee

Description: Public tender VOB/A expansion of the streets at Klippelgarten and "Klosterhofstrasse in Sulzbach (Taunus) including flood protection wall, drinking water supply and sewer channel 2. 3. 2. 30. Soil excavation, trench channel, T ... Further expansion of the streets at Klippelgarten and "Klosterhofstrasse in Sulzbach (Taunus) including flood protection wall, drinking water supply and sewer channel 2. 3. 2. 30. Soil excavation, trench channel, depth up to 4.00 m 530 m³ 2. 3. 2. 180. Removal, recycling of excavated soil, uncontaminated, homogeneous area B2 - B4 (bkl. 2-5 VOB 2012), 1150 tonnes 2. 3. 2. 190. Allowance for excavation Bm-f3 recycling/disposal, 1150 tonnes. 2. 3. 2. 150. Install filling material, embedding pipes Dn 1600, 200 m³ 2. 3. 3. 60. Reinforced concrete pipes Dn 1600, 37.50 m 2. 3. 3. 100. Throttle shaft 1 piece 2. 3. 3. 110. Connection to union collector, slip shaft 1 piece 2. 3. 3. 120. Alpheus throttle device, delivery and installation 1 piece 2. 4. 1. 10. Soil excavation, trench channel, depth up to 4.00 m, 900 m³ 2. 4. 1. 30. Coarse chipping, grain size 0/45-0/63, 100 m³ 2. 4. 1. 40. Trench shoring, 1350 M² 2. 4. 1. 170. Install filling material, embedding pipes Dn 300-600, 210 M³ 2. 4. 1. 190. Backfilling canal trench Material: Stone earth 'up to 3.00 M 450 M³ 2. 4. 1. 200. Removal, recycling of excavated soil, uncontaminated, homogeneous area B2 - B4 (bkl. 2-5 Vob 2012) 1550 To. 2. 4. 1. 210. Allowance for excavation Bm-f3 recycling/disposal 1550 To. 2. 4. 2. 10. Pp - sewer pipe Dn/od 315, 90 M 2. 4. 2. 30. Pp - sewer pipe Dn/od 400, 115 M 2. 4. 2. 50. Pp - sewer pipe Dn/od 500, 50 M Shaft structures Dn 1000, 8 sewer house connections, 21 drinking water pipes 3. 3. 1. 20. Soil excavation, trench for drinking water supply, depth up to 1.75 m, 415 m³ 3. 3. 1. 120. Pipeline zone, 185 m³ 3. 3. 1. 130. Backfilling of drinking water trench, with materials to be delivered from the supplier, 150 m³ 3. 3. 1. 220. Removal, recycling Excavated soil, uncontaminated, homogeneous area B2 - B4 (bkl. 2-5 Vob 2012), 700 tons 3. 3. 1. 230. Allowance for excavation Bm-f3 recycling/disposal, 700 tons. 3. 4. 1. 30. Pe 100 - pipe Dn 100, 370 M 3. 4. 1. 110. Ductile fittings, 350 Kg 3. 5. 1. 10. Pe-100 pressure pipe Da 40 / earthworks, 80 M 3. 5. 1. 20. Pe-100 pressure pipe Da 63 / earthworks, 20 M 3. 5. 1. 30. Removal, recycling of excavated soil, uncontaminated, homogeneous range B2 - B4 (bkl. 2-5 Vob 2012), 230 To. 3. 5. 1. 40. Allowance for excavation Bm-f3 recycling/disposal, 230 To. 3. 5. 1. 120. Valve drilling fitting for Da 125 Pehd, 19 pieces 3. 5. 1. 150. Water meter shaft delivery, installation 1 meter, 10 pieces 3. 5. 1. 310. Drinking fountain Twb, 1 piece flood protection 04.03.03.1 Soil excavation construction pit, depth up to 2.50 m 800 M3 04.03.03.6 Soil, excavation pit backfill, choice of, 210 M3 04.03.04.1 Removal, recycling of soil excavation, uncontaminated, homogeneous area B2 - B4 (bkl. 2-5 Vob 2012), 650 T 04.03.04.2 Allowance for excavation Bm-f3 recycling/disposal, 650 T 04.04.01.1 Shoring for excavations, T up to 2.50 m, 600 m2 04.05.01.6 Open GW-section, pump output 20 l/s, 1500 h 04.07.01.5 Sb-prefabricated part made of C 35/45, 120 m3 04.07.01.6 Sb-prefabricated part made of C 35/45 Ramp access to allotments, 15 m3 04.07.01.8 Installing B500a / B500b reinforcing steel, 35 T 04.07.01.15 Wall plate, height 80 cm, width 99 cm, 20 pieces 04.07.01.16 Wall plate, height 105 cm, width 99 cm, 16 pieces Road construction 5. 2. 4. 40. Traffic area up to 60 cm removal / disposal Bm-0*, 1380 m² 5. 2. 4. 50. Traffic area up to 65 cm removal / disposal Bm-0*, 80 m² 5. 2. 4. 60. Traffic area up to 60 cm removal / disposal Bm-0*, 420 m² 5. 2. 4. 70. Allowance for interim soil storage for sampling according to Laga, 760 m³ 5. 2. 4. 80. Allowance for soil disposal, Bm-f3* / Avv 17 01 07, 1400 tonnes 5. 2. 4. 110. Allowance for disposal of tar-containing rubble up to 400 mg/kg / Avv 17 03 01*, 300 tonnes 5. 2. 6. Road drainage Road drain, 19 pieces 5. 2. 7. 20. "Create gravel base layer, Bk1.0 to Bk100*0/32, 1450 M² 5. 2. 7. 40. Frost protection layer D 26 cm roadway, 390 M² 5. 2. 8. 150. Drainage channel three-row, trough shape, B=0.50 M, 265 M 5. 2.10. 20. Paving from concrete blocks, St.100/200/100*mf, O.front., bedding 0/5*sz 22*joint 0/2, elbow joint, 1440 M² 5. 3. 3. 30. Remove traffic area up to 34 cm / Disposal Bm-0*, 405 M² 5. 3. 4. Street drainage 5. 3. 4. 30. Kg-pipes Dn 150 / Earthworks Up to 2.00 m average depth, 55 M 5. 3. 7. 20. Paving made of concrete blocks, manufacturer st. 100/200/100*mf, O.front., bedding 0/5*sz 22*joint 0/2, elbow connection, 515 M²