Valve Tenders

Details: Description Combine Harvester Dimension: Length (mm)-5350, Width(mm)-2545, Height (mm) 2800 3,300 Kg Four-stroke, Water-cooled, Turbocharger 65 Kw (2400 R/min), Diesel 60l Capacity Starting Method: Electric Start Battery: 12v Header Width (mm): 2,300 Header Type (/) Rotary Cutter Reel Type (/) Eccentric Finger Reel Diameter (mm): ɸ900 Track (/) 550 X 90 X 56 Ground Contact Pressure Of Crawler (kpa) ≤20 Track Gauge (mm) 1,250 Travel Speed L (m/s) 1.29 Travel Speed M (m/s) 1.68 Travel Speed H (m/s) 2.41 Speed Shift System (/) 38 Cc Hst Threshing System: Diameter X Length (mm) ɸ620 X 2,050 Cleaning System: Width X Length (mm) 840 X 1,700, Upper Sieve Structure (/) Two-stage Design Grain Output: Capacity In Tank (m3) 0.6; 3/bagging One (1) Year Warranty For Services And Parts Except Consumables Upon Final Acceptance. The Unit Shall Include Brochures Which Include But Not Limited To Manual, Warranty Booklet, Operations Manual For Accessories And Operations And Maintenance Manuals In English. Free First Change Oil The Vehicle Must Have 20 Liters Of Fuel In The Tank Upon Delivery The Bidder Must Provide After Sales Support To The Procuring Entity The Bidder Must Provide After Sales Warranty To The Procuring Entity Four-wheel Tractor With Implements Engine Power @speed (hp) 45@2400 4 Cylinders, Inline, Vertical, Water-cooled Engine 70 Fuel Tank Capacity (l) 12v Battery Dry Air Cleaner Gears Shuttle 8f + 8r Dual Clutch Mechanical Disc Brake Pin Type, Mechanical Differential Lock Direction Of Turning: Clockwise, Viewed From Tractor Rear Diameter Of Pto: Shaft (mm) 35 Pto Speed (rpm) 540/760 3 Point Hitch: Category Ii & I Control System: Position, Draft, Float Rear Auxiliary Remote Valves 2 Groups >=1191 >=1324 Lifting Capacity (kg) Hydraulic Power Steering Dimension (mm) Canopy: 3650*1572*2650 Ground Clearance (mm): 440 Tires (f/r): 8-18/13.6-24 R-1t, Other Size Optional Wheel Base (mm) 1845 Wheel Track (f/r) (mm): 1200-1500/1200-1500 1200-1500/1200-1500 One (1) Year Warranty For Services And Parts Except Consumables Upon Final Acceptance. Free First Change Oil The Unit Shall Include Brochures Which Include But Not Limited To Manual, Warranty Booklet, Operations Manual For Accessories And Operations And Maintenance Manuals In English. The Vehicle Must Have 20 Liters Of Fuel In The Tank Upon Delivery The Bidder Must Provide After Sales Support To The Procuring Entity The Bidder Must Provide After Sales Warranty To The Procuring Entity

Details: Description Item No. Qty. Unit Particulars Abc Qty*abc 1 125 Unit "knapsack Sprayer, 2 In 1, 1. Classification Lever And Battery Operated 2. Design And Performance - All Valves And Vale Seals Shall Be Corrosion Resistant - Flow Rate: 1.4 Lpm, Maximum -mean Operating Pressure: 100 Kpa (14.5 Jpsi), Minimum -tank Capacity: 16l - Minimum -tank Gross Weight: Maximum Of 22 Kg -with At Least Two (nozzle) Tips - Provided With 50mm Wide Adjustable Strap With Pads - Lance Length: 100cm Minimum 3. Tank: -plastic 4. With Brand Name/trademark Label 5. With 8"" Da Logo-(banner Program)-(year), All--weather Sticker 6. Shall Be Amtec Tested If Lever-operated Knapsack Sprayer 7. With Delivery And Testing " ₱2,200.00 ₱275,000.00 2 125 Pcs Steel Shovel, Pointed Tip, 102cm Length, 30cm Shovel Head Length, 30cm Shovel Head Width, 12cm Handle Width ₱300.00 ₱37,500.00 3 125 Pcs Fork Spade, Steel, 4 Prongs Steel Handle, 100 Cm Length, Finch Fork Length ₱400.00 ₱50,000.00 4 5 Pcs Bolo, Rubber Handle (5-7 Inches Length), River, 18-19 Inches Length (blade To Handle) ₱10,000.00 ₱50,000.00 5 125 Pcs Long Stem Compost Soil Thermometer, Celcius (0-100), 20 Inches Stem Length, 3 Inches Lens Diameter, Rustproof Stainless Steel Probe ₱400.00 ₱50,000.00 6 1 Unit "portable Digital Grain Moisture Meter 1. Classification Portable Digital Grain Moisture Meter, Electrical Resistance Method 2. Design And Performance - Useful For Measuring Moisture Content Of Grains - Measurement Range For Grains: 6.3% ∼35.0% - Automatic Temperature Compensation - Average Data Available -battery Replacement Sign Appears -large Digital Lcd Display For Easy Reading - 'ce' Mark Obtained - Operating Temperature: -10°c To +40°c - Resolution: 0.1% - Accuracy:±0.5% - Power Source: 1.5v X 4 Aa Batteries - Dimensions: 164mm (l) X 94mm (w) X 40mm (h) - Weight: Approx. 1.5 Kg 3. Material -durable Plastic Casing 4. With Brand Name / Trademark Label 5. With 8"" Da Logo - (banner Program) - (year), All - Weather Sticker 6. Shall Be Amtec Tested If Required For Grain Moisture Meters 7. With Delivery And Testing" ₱20,000.00 ₱20,000.00 Total Abc ₱482,500.00

Details: Description Bids And Awards Committee Iloilo Provincial Government Procurement Of Medical Supplies Bid No. Pho-24-1613-b Philippine Bidding Documents Sixth Edition July 2020 Table Of Contents Section I. Invitation To Bid……………………………………………………..3 Section Ii. Instructions To Bidders………………………………………..…...5 1. Scope Of Bid ………………………………………………………………………. 5 2. Funding Information………………………………………………………………. 5 3. Bidding Requirements ……………………………………………………………. 5 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 5 5. Eligible Bidders…………………………………………………………………… 5 6. Origin Of Goods ………………………………………………………………….. 6 7. Subcontracts ……………………………………………………………………… 7 8. Pre-bid Conference ………………………………………………………………. 7 9. Clarification And Amendment Of Bidding Documents …………………………… 7 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 7 11. Documents Comprising The Bid: Financial Component …………………………... 7 12. Bid Prices …………………………………………………………………………. 8 13. Bid And Payment Currencies ……………………………………………………… 8 14. Bid Security ………………………………………………………………………. 8 15. Sealing And Marking Of Bids ……………………………………………………… 9 16. Deadline For Submission Of Bids …………………………………………………. 9 17. Opening And Preliminary Examination Of Bids ………………………………….. 9 18. Domestic Preference ……………………………………………………………… 9 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 9 20. Post-qualification ………………………………………………………………… 10 21. Signing Of The Contract …………………………………………………………… 10 Section Iii. Bid Data Sheet …………………………………………………..11 Section Iv. General Conditions Of Contract ……………………...………..12 1. Scope Of Contract ………………………………………………………………… 12 2. Advance Payment And Terms Of Payment ……………………………………….. 12 3. Performance Security ……………………………………………………………. 12 4. Inspection And Tests ……………………………………………………………… 12 5. Warranty …………………………………………………………………………. 13 6. Liability Of The Supplier ………………………………………………………….. 13 Section V. Special Conditions Of Contract ………………………………….14 Section Vi. Schedule Of Requirements ……………………………………....16 Section Vii. Technical Specifications …………………………………………19 Section Viii. Checklist Of Technical And Financial Documents …………..23 Section I. Invitation To Bid Procurement Of Medical Supplies Bid No. Pho-24-1613-b 1. The Iloilo Provincial Government Through The Pdrrm Quick Response Fund 2024 Intends To Apply The Sum Of One Million Seven Hundred Forty-seven Thousand Nine Hundred Sixty-five Pesos (php1,747,965.00) Being The Abc To Payments Under The Contract For The Procurement Of Medical Supplies. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 14 Days Upon Receipt Of The Notice To Proceed (ntp). Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat Of The Iloilo Provincial Government And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 13, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Iloilo Provincial Government Will Hold A Pre-bid Conference On November 20, 2024 9:00 A.m. At 5th Floor, Bac Secretariat Office, Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City And/or Through Video Conferencing Or Webcasting, Upon Request At Least Three (3) Days Before The Pre-bid Conference, Via Zoom Or Other Videoconferencing Portals, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The 5th Floor, Bac Secretariat Office, Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City On Or Before December 4, 2024 At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 4, 2024 At 9:01 A.m. At The 5th Floor, Bac Secretariat Office, Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. A. The Participating Bidder/supplier Or Its Authorized Representative Must Indicate In Any Of The Eligibility Documents, An Email Address Or A Working Fax Number. The Absence Of Which Shall Be A Ground For Disqualification. Notice To The Bidder/supplier Through The Use Of Either Of These Means (email/fax) Is Considered Sufficient Notice. The Date Of Filing Of Reconsideration And All Communications With The Bac Shall Be Its (bac) Date Of Receipt. B. The Bidder(s)/awardee(s) Or Its Authorized Representative Must Conform To The Notice Of Award Within Three (3) Calendar Days From Receipt Of Such Notice And The Winning Bidder Shall Post The Required Performance Security And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award In Accordance With Section 37.2.1 Of The Revised Irr Of R.a. No. 9184. C. The Bidder/supplier Must Have No Pending Unaccepted Notice To Proceed Three (3) Days From The Date Of Acceptance And Signing Of The Purchase Order. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. D. The Bidder/supplier Must Have No Notice Of Award Pending Its Conformity Three (3) Days From The Date Of Its Receipt Of The Notice Of Award. Otherwise, It Shall Be Aground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. E. The Bidder/supplier Shall Submit A List Of All Its Ongoing And Completed Projects With The Iloilo Provincial Government Indicating The Delivery Periods And Accomplishments Of Such Projects. F. The Bidder/supplier At The Time Of The Bidding Must Have No Pending Unposted Performance Or Warranty Security, As The Case May Be, Beyond The Period Allowed In The Notice Of Award. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. G. When An Occurrence Of A Tie Among Bidders Takes Place, I.e., Two Or More Of The Bidders Are Determined And Declared As The Lowest Calculated And Responsive Bidder (lcrb), The Winning Bidder Shall Be Determined By Draw Lots Upon Notice To The Bidders Concerned And/or Their Authorized Representatives In Accordance With The Relevant Circulars Issued By The Government Procurement Policy Board (gppb). 11. The Iloilo Provincial Government Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Bac Secretariat Head 5th Floor, Bids And Awards Committee Iloilo Provincial Capitol Email Address: Ipg_bacs@yahoo.com/bac@iloilo.gov.ph Website: Iloilo.gov.ph Telephone Number: (033) 336-0736 13. You May Visit The Following Websites For Downloading Of Bidding Documents: Ipg.gov.ph And/or Philgeps.com November 10, 2024 Atty. Dennis T. Ventilacion Chairman, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Iloilo Provincial Government Wishes To Receive Bids For The Purchase Of Medical Supplies With Bid No. Pho-24-1613-b. The Procurement Project (referred To Herein As “project”) Is Composed Of Ninety-five (95) Items, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2024 In The Amount Of One Million Seven Hundred Forty-seven Thousand Nine Hundred Sixty-five Pesos (php1,747,965.00). 2.2. The Source Of Funding Is: Lgus, The Annual Or Supplemental Budget, As Approved By The Sanggunian. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. B. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. C. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: [select Either Failure Or Monopoly Of Bidding Based On Market Research Conducted] I. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And Ii. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time At Its Physical Address As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Complete Bid - One Project Having Several Items That Shall Be Awarded As One Contract In Case Of Complete Bid. Line Bidding/partial Bidding - One Project Having Several Items, Which Shall Be Awarded As Separate Contracts Per Item 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Refers To The Contracts To Be Bid Or The Object Of The Contract; B. Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed. 12 The Price Of The Goods Shall Be Quoted Ddp [provincial Health Office Supply Room, Iloilo Sports Complex, La Paz, Iloilo City] Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Five Percent (5%) Of Abc, If Bid Security Is In Surety Bond. 15 Bidders Shall Prepare An Original Of The First (eligibility And Technical) And Second (financial) Envelopes. In Addition, Bidders Shall Submit Separate Copies Of The First And Second Envelopes (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. 19.3 No Further Instructions. 20.2 For The Procurement Of Drugs And Medicines And Medical Equipment/supplies, The Bidder Shall Submit The Following: A. Certificate Of Product Registration From Food And Drug Administration (fda) For Easy Validation During The Post-qualification; B. Certificate If Good Manufacturing Practice From Fda, For Easy Validation During The Post-qualification; C. Batch Release Certificate From Fda, For Easy Validation During The Post-qualification; D. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/ Dealer Of The Products / Items For Easy Validation During The Post-qualification; E. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license: S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer); F. License To Operate (lto) Issued By Fda, If Applicable; G. After-sales Services/parts, If Applicable; H. Manpower Requirements, If Applicable. 21.2 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Iv (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 6.1. In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 6.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines, State:] “the Delivery Terms Applicable To This Contract Are Delivered To The Provincial Health Office Supply Room, Iloilo Sports Complex, La Paz, Iloilo City. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The Authorized Employee/official Of The Iloilo Provincial Government. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. 2.2 Partial Payment Is Not Allowed. 4 The Inspections And Tests That Will Be Conducted Are Through Physical Inspection. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Glucometer Set With Strips And Lancet 80 80 2 Strip, Compatible With Glucometer, 50 Pcs 300 300 3 Lancet, Compatible With Glucometer, 50 Pcs 300 300 4 Fine Insulin Syringe, 1 Cc, 100’s 5 5 5 Cotton, 150 Balls/pack 10 10 6 Alcohol, 70% Isopropyl, 500 Ml. 50 50 7 Elastic Bandage, 2 Inches X 5 Yards 100 100 8 Elastic Bandage, 3 Inches X 5 Yards 100 100 9 Elastic Bandage, 4 Inches X 5 Yards 100 100 10 Elastic Bandage, 6 Inches X 5 Yards 100 100 11 Elastic Cohesive Bandage, 1 Inch X 5 Yards 100 100 12 Elastic Cohesive Bandage, 2 Inches X 5 Yards 100 100 13 Elastic Cohesive Bandage, 3 Inches X 5 Yards 100 100 14 Elastic Cohesive Bandage, 4 Inches X 5 Yards 100 100 15 Emergency Bandage, 4 Inches, 5 Yards 20 20 16 Emergency Bandage, 6 Inches, 5 Yards 20 20 17 Nitrile Examination Gloves, Small, 100's 10 10 18 Nitrile Examination Gloves, Medium, 100's 10 10 19 Nitrile Examination Gloves, Large, 100's 10 10 20 Face Mask, 3-ply, 50's 10 10 21 Povidone Iodine, 1 Gallon 1 1 22 Povidone Iodine, Dry Powder Spray 2.5%, 55 Grams 10 10 23 Plaster Tape, White, 12 Rolls Per Box, ½” 2 2 24 Bp Apparatus, Aneroid 10 10 25 Stethoscope, Adult 10 10 26 Gauze Sterile Pads, 4’’ X 4’’ - 8 Ply, 100's 50 50 27 Gauze Swab Non-sterile, 4” X 4” - 8 Ply, 100’s 100 100 28 Pulse Oximeter, Handheld 3 3 29 Pulse Oximeter, Fingertip 20 20 30 Padded Splint With Bag 2 2 31 Pelvic Binder 5 5 32 Soft Led Pupil Gauge Penlight 20 20 33 Head Lamp 5 5 34 Disposable Three-legged Atomizing Cup With Random Color, 6ml 100 100 35 Nasal Cannula, Pedia 100 100 36 Nasal Cannula, Adult 100 100 37 Iv Cannula, Gauge 18, 100's 1 1 38 Iv Cannula, Gauge 20, 100's 1 1 39 Iv Cannula, Gauge 22, 100's 1 1 40 Iv Cannula, Gauge 24, 100's 1 1 41 Heplock, 100's 1 1 42 Iv Fluids, Pnss, 1 Liter 15 15 43 Iv Fluids, D5lr, 1 Liter 15 15 44 Iv Fluids, D5h2o, 1 Liter 15 15 45 Sterile Water, 50 Cc 30 30 46 Syringe, 3 Cc, 100's 1 1 47 Syringe, 5 Cc, 100's 1 1 48 Syringe, 10 Cc, 100's 1 1 49 Bandage Scissors 10 10 50 Tourniquet 30 30 51 Portable Oxygen Tank With Pen-type Regulator, Aluminum Tank, Toggle Valve, Size D, (10 Lbs./2.9l) 3 3 52 Oropharyngeal Airway Adjuncts Set 5 5 53 Nasopharyngeal Air Adjuncts Set 5 5 54 Spider Strap 5 5 55 Non-contact Thermometer 5 5 56 Neck Brace 10 10 57 Cold Spray, 3.5 Ounce 20 20 58 Oxygen Mask, Neonate 100 100 59 Oxygen Mask, Adult 100 100 60 Oxygen Mask, Pedia 100 100 61 Non-rebreather Mask, Adult 40 40 62 Non-rebreather Mask, Pedia 40 40 63 Bag Valve Mask, Pedia 2 2 64 Bag Valve Mask, Newborn 2 2 65 Bag Valve Mask, Adult 2 2 66 Nebulizer Kit, Portable 5 5 67 Sam Splint, 36 X 4.25 Inches 15 15 68 Sterile Bun Sheet, 40" X 90" 20 20 69 Military Portable Stretcher 5 5 70 Gauze Roll, Conforming, 3" X 4.1 Yards, 12 Rolls 20 20 71 Gauze Roll, Conforming, 4" X 4.1 Yards, 12 Rolls 20 20 72 Gauze Roll, Conforming, 2" X 4.1 Yards, 12 Rolls 20 20 73 Combat Gauze Pads, 4.5” X 4.1 Yards 10 10 74 Ecg Electrodes, Pedia, Wet Gel, 100's 2 2 75 Ecg Electrodes, Adult, Solid Gel, 100's 2 2 76 Ecg Printing Paper, 50mm X 30m, 3 Rolls/box 2 2 77 Menthol + Methyl Salicylate + Eucalyptus Oil, 210 Ml. 20 20 78 Thermal Blanket, 160 X 210 Cm 40 40 79 Portable Manual Suction 2 2 80 Aed Battery Pack, Compatible With Mindray Machine 2 2 81 Defibrillator Pads, Pedia, Compatible With Lifepack Machine 2 2 82 Defibrillator Pads, Adult, Compatible With Lifepack Machine 2 2 83 Defibrillator Pads, Pedia, Compatible With Mindray Machine 2 2 84 Defibrillator Pads, Adult, Compatible With Mindray Machine 2 2 85 Inflatable Air Splint 5 5 86 Traction Splint 2 2 87 Supraglottic Airways Set 2 2 88 Head Immobilizer 1 1 89 Vacuum Mat 2 2 90 Triangular Bandage, 40" X 40" X 56" 200 200 91 Sterile Occlusive Dressing 15 15 92 Plastic Strips, 12's 44 44 93 Kn95mask, 10's 95 95 94 Plaster Adhesive, 2.5 Cm X 5 M 20 20 95 Multi-purpose Emergency Backpack 3 3 _________________________________ Signature Over Printed Name Section Vii. Technical Specifications Bid No.: Pho-24-1613-b Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Glucometer Set With Strips And Lancet 2 Strip, Compatible With Glucometer, 50 Pcs 3 Lancet, Compatible With Glucometer, 50 Pcs 4 Fine Insulin Syringe, 1 Cc, 100s 5 Cotton, 150 Balls/pack 6 Alcohol, 70% Isopropyl, 500 Ml. 7 Elastic Bandage, 2 Inches X 5 Yards 8 Elastic Bandage, 3 Inches X 5 Yards 9 Elastic Bandage, 4 Inches X 5 Yards 10 Elastic Bandage, 6 Inches X 5 Yards 11 Elastic Cohesive Bandage, 1 Inch X 5 Yards 12 Elastic Cohesive Bandage, 2 Inches X 5 Yards 13 Elastic Cohesive Bandage, 3 Inches X 5 Yards 14 Elastic Cohesive Bandage, 4 Inches X 5 Yards 15 Emergency Bandage, 4 Inches, 5 Yards 16 Emergency Bandage, 6 Inches, 5 Yards 17 Nitrile Examination Gloves, Small, 100's 18 Nitrile Examination Gloves, Medium, 100's 19 Nitrile Examination Gloves, Large, 100's 20 Face Mask, 3-ply, 50's 21 Povidone Iodine, 1 Gallon 22 Povidone Iodine, Dry Powder Spray 2.5%, 55 Grams 23 Plaster Tape, White, 12 Rolls Per Box, ½” 24 Bp Apparatus, Aneroid 25 Stethoscope, Adult 26 Gauze Sterile Pads, 4” X 4” – 8ply, 100's 27 Gauze Swab Non-sterile, 4” X 4” - 8ply, 100's 28 Pulse Oximeter, Handheld 29 Pulse Oximeter, Fingertip 30 Padded Splint With Bag 31 Pelvic Binder 32 Soft Led Pupil Gauge Penlight 33 Head Lamp 34 Disposable Three-legged Atomizing Cup With Random Color, 6ml 35 Nasal Cannula, Pedia 36 Nasal Cannula, Adult 37 Iv Cannula, Gauge 18, 100's 38 Iv Cannula, Gauge 20, 100's 39 Iv Cannula, Gauge 22, 100's 40 Iv Cannula, Gauge 24, 100's 41 Heplock, 100's 42 Iv Fluids, Pnss, 1 Liter 43 Iv Fluids, D5lr, 1 Liter 44 Iv Fluids, D5h2o, 1 Liter 45 Sterile Water, 50 Cc 46 Syringe, 3 Cc, 100's 47 Syringe, 5 Cc, 100's 48 Syringe, 10 Cc, 100's 49 Bandage Scissors 50 Tourniquet 51 Portable Oxygen Tank With Pen-type Regulator, Aluminum Tank, Toggle Valve, Size D, (10 Lbs./2.9l) 52 Oropharyngeal Airway Adjuncts Set 53 Nasopharyngeal Air Adjuncts Set 54 Spider Strap 55 Non-contact Thermometer 56 Neck Brace 57 Cold Spray, 3.5 Ounce 58 Oxygen Mask, Neonate 59 Oxygen Mask, Adult 60 Oxygen Mask, Pedia 61 Non-rebreather Mask, Adult 62 Non-rebreather Mask, Pedia 63 Bag Valve Mask, Pedia 64 Bag Valve Mask, Newborn 65 Bag Valve Mask, Adult 66 Nebulizer Kit, Portable 67 Sam Splint, 36 X 4.25 Inches 68 Sterile Bun Sheet, 40" X 90" 69 Military Portable Stretcher 70 Gauze Roll, Conforming, 3" X 4.1 Yards, 12 Rolls 71 Gauze Roll, Conforming, 4" X 4.1 Yards, 12 Rolls 72 Gauze Roll, Conforming, 2" X 4.1 Yards, 12 Rolls 73 Combat Gauze Pads, 4.5” X 4.1 Yards 74 Ecg Electrodes, Pedia, Wet Gel, 100's 75 Ecg Electrodes, Adult, Solid Gel, 100's 76 Ecg Printing Paper, 50mm X 30m, 3 Rolls/box 77 Menthol + Methyl Salicylate + Eucalyptus Oil, 210 Ml. 78 Thermal Blanket, 160 X 210 Cm 79 Portable Manual Suction 80 Aed Battery Pack, Compatible With Mindray Machine 81 Defibrillator Pads, Pedia, Compatible With Lifepack Machine 82 Defibrillator Pads, Adult, Compatible With Lifepack Machine 83 Defibrillator Pads, Pedia, Compatible With Mindray Machine 84 Defibrillator Pads, Adult, Compatible With Mindray Machine 85 Inflatable Air Splint 86 Traction Splint 87 Supraglottic Airways Set 88 Head Immobilizer 89 Vacuum Mat 90 Triangular Bandage, 40" X 40" X 56" 91 Sterile Occlusive Dressing 92 Plastic Strips, 12's 93 Kn95mask, 10's 94 Plaster Adhesive, 2.5 Cm X 5 M 95 Multi-purpose Emergency Backpack -dimension:420 X 310 X 570mm (at Least) - Weight: At Least 3.4kg -capacity: At Least 74 L -color: Red/black -with Two Removable Bags Terms And Conditions 1. For Items With Expiration, Expiry Date Should Be Minimum Of 20 Months From The Date Of Notice To Proceed 2. Items Must Be Delivered At The Provincial Health Office Supply Room, Iloilo Sports Complex, La Paz, Iloilo City 3. Lot Bidding __________________________________ Signature Over Printed Name Section Viii. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages);or ⬜ (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document, And ⬜ (c) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And ⬜ (d) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (i) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (j) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (k) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc); Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (l) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (m) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (n) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (o) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (p) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.

Details: Description Invitation To Re-bid The Iligan City Government Bids And Awards Committee (bac), Through General Fund – 20% / Dev. Fund, Intend To Apply The Sum Of P 1,240,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Procurement Of 75hp Submersible Pump And Motor With Project No. Cb(b)-24-103 (icws). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Procurement Of 75hp Submersible Pump And Motor All 316 Stainless Steel Submersible Deep Well Borehole Pump, Alsl316 Stainless Steel Impeller, Alsl316 Stainless Steel Pump Bowl, Alsl329 Stainless Steel Pump Shaft, Built-in Alsl316 Stainless Steel Non-return Check Valve With The Following Specifications: Pump Specification: No. Of Stages: Three (3) Stages Frequency: 60hz Specific Speed: 3450rpm Design Flow: 700 Usgpm (158.97cu.m/hr.) Tdh: 85-105 Meters (278-344ft.) Min Efficiency: 84.8% Discharge Size: 6” Dia. Npt Motor Specification: Rewindable Submersible Motor Horsepower: 75hp Volts: 460vac Motor Diameter: 8” Fla: 232 Amperes Sf: 1.16 Sfla: 142 Amperes Motor Eff @ Fla: 82% Phase: 3 Phase Frequency: 60hz The Windings Of The Starter Are Made Of A Special Waterproof Wire Of Pure Electrolytic Copper Sheathed With Special Non-hydroscopic Thermoplastic Material For Easy Rewinding. Note: The Supplier Must Be A Main Distributor Of Pump With Technical Staff To Address The After Sales Services. Accessories (splicing Kit 82-a3 3set, Rubber Tape 2 Rolls And Electrical Tape 2 Rolls) Approved Budget For The Contract (abc) : P 1,240,000.00 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within Ten (10) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1. Issuance Of Bid Documents: November 5 – November 26, 2024 – 8:00 A.m. At Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. 2. Pre-bid Conference: November 12, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 3. Submission Of Bids: November 26, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4. Opening Of Bids: November 26, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: November 5, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-103 (icws)

Details: Description Supply Of Laboratory Equipment For The Project Entitled Project 2: Establishment Of Pharmaceutical Sciences Service For Clinical Research (107-198) (1) Freeze Dryer General Specifications ● Chamber Maximum Capacity: 8l ● Condenser Maximum Capacity: 10l ● Sublimation Rate: 2-4 L/ Day ● Set Temperature Range: -60°c To -90°c ● Pressure Range: 0.01 To 10 Torr ● Compressor: 1/2 Hp ● Defrost Type: Manual ● Dimensions: Width - 390-410 Mm, Depth - 520 - 540 Mm, Height - 405 - 425 Mm ● Maximum Weight: 65 Kg ● Power Supply: 230 V, 50/60 Hz ● Allows Automatic Or Manual Process Control ● Temperature, Vacuum, And Timer Can Be Controlled ● Automatic Rapid Integrated Hot Gas Defrost Function For Quick Next Cycle Turn-around ● Homogeneous Temperature Distribution Across All Shelves In Dry Chamber Made Of Stainless Steel ● Backlight Lcd Display Indicates Temperature And Vacuum ● Ce Certified And Unique Serial Number For Tracing ● Controller: Jog-dial-switch (turn + Push) And Touch Button Inclusions: ● Accessories ○ T-type Manifold, 12 Ports With Handle Valve And Silicone Stopper ○ Dry Chamber, Acrylic, 8 Ports With Vacuum Handle And Silicone Stopper ○ Shelves, 3 Stages, Stainless Steel For Dry Chamber ○ Vacuum Handle Valve ○ 40 Ml, 80 Ml, 200 Ml Flasks With Silicone Flask Tops ○ Glass Tube Adapters ● Vacuum Pump ○ 1/3 Hp ○ 1450 Rpm Motor Ration ○ 84 L/min Max Flow Rate ○ 670 Mmhg Max Vacuum Terms And Conditions: 1. Delivery Of Sixty (60) To Ninety (90) Days After Po Awarding 2. Basic Documented Verification Of The Equipment Functionality 3. All Parts Of The Equipment And Its Accessories Must Be Identified By Part Number Or Accessory Number 4. Installation, Calibration, And Initial Operation Of The Equipment Done By Qualified Service Engineer As Part Of The Bid Price 5. Operations And Service Manual Must Be Provided 6. Standard Operating Procedures (eg. Cleaning, Routine Maintenance, Etc.) If Available 7. Local Training Of At Least 2 End-user (personnel) At The College Of Pharmacy Or The Supplier’s Laboratory To Operate, Troubleshoot, And Maintain Equipment 8. Warranty, Parts, And Preventive Maintenance For Two (2) Years Or More 9. Certification/guarantee On Availability Of Parts, Accessories, Supplies For The Next 10 Years Or More 10. Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Installation, Testing And Commissioning 11. Bi-annual Preventive Maintenance From The Distributor's Qualified Technician During The Warranty Period 12. Availability Of Trained Service Engineers To Respond, Troubleshoot, And Repair Unit Within 48 Hours Of A Reported Incident Even After The Warranty Period. 13. Bid Price Must Include Value-added Tax Of 12 Percent And Delivery Fee. (1) Homogenizer General Specifications: ● Capable Of Of Mixing, Dispersing, Emulsifying, And Milling ● Mixing Components Should Be Interchangeable Without Any Tools ● Mixing Capacity Range: 1-30 L ● Machine Dimensions: Length - 400 - 500 Mm, Width - 390 - 500 Mm, Height - 1160 - 1260 Mm ● Maximum Weight: 30 Kg ● Motor: 1 Hp Ac ● Power Supply: Single Phase, 220v, 50/60hz ● Speed Range: 0-6000 Rpm ● Motor Height Adjustment: Electrical ● Material: Medical Grade Ss316l Material For All Wetted Parts ● Rotor/stator “v” Design, Double Vortex 65 Mm ● Machine Base: Corrosion Resistant Aluminum Base With Height-adjustable Non-slip Rubber Feet ● Must Have Emergency Stop/ Turn Off Button Inclusions: 1. Explosion Proof Motor, Cable Or Remote Panel Control 2. Vessel Clamp 3. Aluminium H Stand With Electrical Lifting 4. Attachments A. High Flow Mixer 83 Mm B. Rotor Stator Sv 45mm C. Rotor Stator Sv 65mm D. Dispersing Blade 63 Mm E. Vessel Clamp 5. Water Bath Circulator A. Temp Range: 5 To 95 Celsius B. For Both Cooling & Heating C. Hose & Fittings Included D. Able To Monitor Jacket Temperature 6. 1l Ss Jacketed Vessel A. Material Wetted Part Ss316l B. Non-wetted Part Ss304 7. 5l Ss Jacketed Vessel A. Working Capacity 5 Liters B. Tank Flat Top C. Dish Bottom D. Material Wetted Part Ss316l E. Non-wetted Part Ss304 F. Thickness Body 3mm G. Jacket 3mm H. Discharge By Manual Tilting I. Design Temperature 150 Celsius J. Included Pt100 Temp Sensor For Product K. Temp Controller Module 8. 10l Ss Jacketed Vessel A. Working Capacity 10 Liters B. Tank Flat Top C. Dish Bottom D. Material Wetted Part Ss316l E. Non-wetted Part Ss304 F. Thickness Body 3mm G. Jacket 3mm H. Discharge By Manual Tilting I. Design Temperature 150 Celsius J. Included Pt100 Temp Sensor For Product K. Temp Controller Module 9. Piston Type Volumetric Filling Machine With Filling Nozzle A. Suitable For Semi-viscous And Viscous Semi-solids B. Contact Parts Ss316l C. Non-contact Parts Ss304 D. Dosage Capacity Range: 20 Ml To 250 Ml Terms And Conditions: 1. Delivery And Installation Of One-hundred Eighty (180) To Two-hundred Ten (210) Days After Awarding Of Purchase Order (po). 2. With Factory Acceptance Tests (fat) And Site Acceptance Tests (sat), Design Qualification (dq), Installation Qualification (iq), Operational Qualification (oq), And Performance Qualification (pq) Documentation And Tools As Part Of The Bid Price 3. All Parts Of The Equipment And Its Accessories Must Be Identified By Part Number Or Accessory Number 4. Qualified Service Engineers Must Perform Factory Acceptance Tests (fat) And Site Acceptance Tests (sat), Design Qualification (dq), Installation Qualification (iq), Operational Qualification (oq), And Performance Qualification (pq) With Documentation And Reports As Part Of The Bid Price 5. Operations And Service Manual Must Be Provided 6. Standard Operating Procedures (eg. Cleaning, Routine Maintenance, Etc.) If Available 7. Local Training Of At Least 5 End-users With Certificate At The Compounding And Product Development Gmp Compliant Facility At The College Of Pharmacy 8. Warranty, Parts, And Preventive Maintenance For Two (2) Years Or More 9. Certification/guarantee On Availability Of Parts, Accessories, Supplies For The Next 10 Years Or More 10. Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Installation, Testing And Commissioning 11. Bi-annual Preventive Maintenance From The Distributor's Qualified Technician During The Warranty Period 12. Availability Of Trained Service Engineers To Respond, Troubleshoot, And Repair Unit Within 48 Hours Of A Reported Incident Even After The Warranty Period 13. Bid Price Must Include Value-added Tax Of 12 Percent And Delivery Fee (1) Mixer General Specifications Of Mixer: ● Can Mix The Material And The Binder Into A Wet, Soft Mass, Uniformly Cut Into Wet Granules, And Then Dry The Granules ● Must Include A Granulator And Fluid Bed Dryer Attached By A Line Or Sizer ● Must Be Certified By Supplier As Good Manufacturing Practice Model ● Granulator ○ Voltage: 220 V ○ Dimensions: Length - 700 - 1100 Mm, Width - 400 - 600 Mm, Height - 900 - 1300 Mm ○ Container Volume Range: 5-10l ○ Output Range: 2-8 Kg ○ Maximum Speed Range: 800 Rpm ○ Maximum Cutting Speed: 3000 Rpm ○ Power Requirement Range: 3-10 Kw ○ Contact Parts: Ss316l, Non-contact Parts: Ss304 ○ Compressed Air Requirement Range ■ Pressure Range - 0.4 - 0.6 Mpa ■ Air Flow Rate - 0.1 - 0.2 M3/min ○ Must Have Built In Electric Heating System ● Fluid Bed Dryer ○ Voltage: 220 V ○ Dimensions: Length - 900 - 1200 Mm, Width - 700 - 1500 Mm, Height - 1900 - 2200 Mm ○ Container Volume Range: 5-10l ○ Processing Capacity Range: 1.5 - 4.8kg ○ Total Power Requirement Range: 10-20 Kw ○ Contact Parts: Ss316l, Non-contact Parts: Ss304 ○ Compressed Air Requirement Range ■ Pressure Range - 0.4 - 0.8 Mpa ■ Air Flow Rate - 0.1 - 0.3 M3/min ○ Must Be Upgradable To Have Granulation And Spraying/coating Capabilities ○ Must Have Built In Electric Heating System ○ Must Have Explosion Duct Inclusions For Both Mixer And Fluid Bed Dryer: ● Must Have Complete Validation Document Protocols And Reports ● Must Include Equipment Manuals ● Must Have Safety Features Such As, But Not Limited To, Emergency Stop And Safety Interlock Features ● Must Include Programmable Logic Controllers (plcs) And Human Machine Interface (hmi) For Operational Controls ● Must Include Printer For Process Parameters Terms And Conditions: 1. Delivery And Installation Of One-hundred Eighty (180) To Two-hundred Ten (210) Days After Awarding Of Purchase Order (po). 2. Must Include Factory Acceptance Tests (fat) And Site Acceptance Tests (sat), Design Qualification (dq), Installation Qualification (iq), Operational Qualification (oq), And Performance Qualification (pq) Documentation And Tools As Part Of The Bid Price 3. All Parts Of The Equipment And Its Accessories Must Be Identified By Part Number Or Accessory Number 4. Qualified Service Engineers Must Perform Factory Acceptance Tests (fat) And Site Acceptance Tests (sat), Design Qualification (dq), Installation Qualification (iq), Operational Qualification (oq), And Performance Qualification (pq) With Documentation And Reports As Part Of The Bid Price 5. Operations And Service Manual Must Be Provided 6. Standard Operating Procedures (eg. Cleaning, Routine Maintenance, Etc.) If Available 7. Local Training Of At Least 5 End-user With Certificate At The Compounding And Product Development Gmp Compliant Facility At The College Of Pharmacy 8. Warranty, Parts, And Preventive Maintenance For Two (2) Years Or More 9. Certification/guarantee On Availability Of Parts, Accessories, Supplies For The Next 10 Years Or More 10. Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Installation, Testing And Commissioning 11. Bi-annual Preventive Maintenance From The Distributor's Qualified Technician During The Warranty Period 12. Availability Of Trained Service Engineers To Respond, Troubleshoot, And Repair Unit Within 48 Hours Of A Reported Incident Even After The Warranty Period Bid Price Must Include Value-added Tax Of 12 Percent And Delivery Fee

Details: Description Items For Bidding - Medical Surgical Supplies For Cy 2025 (epa) Description Quantity Unit Unit Cost Total Cost 1 Glutaraldehyde, Solvents, Tensides, Corrosion Inhibitor With 28 Days Lifespan Once Open 25 Gal 2,000.00 50,000.00 2 Propanol, Benzalkonium Chloride 60 Bot 2,600.00 156,000.00 3 Way Stopcock 1300 Pcs 15.00 19,500.00 3 Way Stopcock With Extension Tube 10cm-20 Cm, Sterile 500 Pcs 380.00 190,000.00 Abdominal Binder, Size L & Xl 300 Pcs 100.00 30,000.00 Absorbable Hemostat, 10cm² Contain 100mg Collagen Of Bovine Origin, 3 Cm X5 Cm 25 Pcs 560.00 14,000.00 Air Way Size #1 50 Pcs 40.00 2,000.00 Air Way Size #2 100 Pcs 40.00 4,000.00 Air Way Size #3 50 Pcs 40.00 2,000.00 Air Way Size 0 (60mm) 30 Pcs 40.00 1,200.00 Air Way Size 00 (50mm) 30 Pcs 40.00 1,200.00 Alcohol Swab 10000 Pcs 2.50 25,000.00 Alcohol, Isopropyl, 70%, 500ml 1000 Bot 95.00 95,000.00 Alcohol, Isoprophyl, 70%,3.75l 500 Gal 800.00 400,000.00 Arm Sling, Adult, Made In 100% Comfortable Cotton *double Ply* Detachable Buckle* Adjustable Strap 150 Pcs 250.00 37,500.00 Arm Sling, Upper Extension Sling, Pedia, Medium 100 Pcs 250.00 25,000.00 Autoclave Indicator, Size: 1" X 50 Meters 50 Roll 320.00 16,000.00 Autoclave Indicator, Size: 3/4" (18mm) X 10 Yards 25 Roll 800.00 20,000.00 Bag Valve Mask, Disposable Pedia, Self-inflating Bag, One-way Valve, Mask, And With Oxygen Reservoir. 50 Pcs 1,000.00 50,000.00 Bag Valve Mask, Disposable, Adult, Self-inflating Bag, One-way Valve, Mask, And With Oxygen Reservoir. 200 Pcs 1,000.00 200,000.00 Bag Valve Mask, Disposable, Neonate 5 Pcs 1,000.00 5,000.00 Bandage , Elastic 2"x5" 10 Pcs 25.00 250.00 Bandage , Elastic 3"x5" 200 Pcs 25.00 5,000.00 Bandage , Elastic 4"x5" 750 Pcs 25.00 18,750.00 Bandage , Elastic 6" X 5" 500 Pcs 35.00 17,500.00 Bedpan, Plastic, Adult 10 Pcs 100.00 1,000.00 Blood Lancet, Ultrafine, G.30, 100's 200 Box 280.00 56,000.00 Blood Transfusion Set 1000 Pcs 58.00 58,000.00 Bp Inflation Bag With Cuff, Children - Bp Cuff Size: 22-36 Cm/ 22-48cm 15 Set 400.00 6,000.00 Bp Inflation Bag With Cuff, Adult Standard 50 Set 400.00 20,000.00 Bp Rubber Pump 10 Pcs 240.00 2,400.00 Breathing Circuit, Anesthesia, Adult, 72'' Expanding Tubing, 3l Latex Bag, 1 Filter And Gas Sampling Elbow 100 Set 980.00 98,000.00 Breathing Circuit, Anesthesia, Pedia, 62'' Expanding Tubing, 1l Latex Bag, 1 Filter And Gas Sampling Elbow 50 Set 980.00 49,000.00 Breathing Circuit, Disposable, Neonate With Connector And Water Traps 10 Set 950.00 9,500.00 Brush, Surgical, Disposable 1000 Pcs 65.00 65,000.00 Cadaver Bag, Adult, With Zipper, 230cmx90cm 100 Pcs 500.00 50,000.00 Cautery Ground Pad, Adult 50 Pcs 300.00 15,000.00 Cautery Ground Pad, Neonate 10 Pcs 200.00 2,000.00 Cautery Ground Pad, Pedia 25 Pcs 250.00 6,250.00 Cautery Pen, Compatible With Valleylab 500 Pcs 400.00 200,000.00 Cervical Collar , Hard Case, Pedia, Adjustible Size 5 Pcs 300.00 1,500.00 Cervical Collar, Hard Case , Adult, Adjustible Size 20 Pcs 250.00 5,000.00 Chest Catheter Fr. 20,radiopaque 5 Pcs 750.00 3,750.00 Chest Catheter Fr. 22,radiopaque 5 Pcs 750.00 3,750.00 Chest Catheter Fr. 28,radiopaque 5 Pcs 750.00 3,750.00 Chest Catheter Fr. 32,radiopaque 10 Pcs 750.00 7,500.00 Chest Catheter Fr. 36,radiopaque 50 Pcs 750.00 37,500.00 Chest Tubing With 1.5l Bottle, Disposable, Set (compact Chest Drainage System) 150 Set 900.00 135,000.00 Closed Suction Tube F 14 (c0vid Use) 50 Pcs 1,600.00 80,000.00 Closed Suction Tube F 16 (covid Use) 5 Pcs 1,600.00 8,000.00 Colostomy Bag 40mm 50 Pcs 560.00 28,000.00 Colostomy Bag 60mm 100 Pcs 560.00 56,000.00 Cord Clamp, Disposable, Umbilical 30 Box 380.00 11,400.00 Cotton Applicator 6", Individually Packed , Sterile, 100's/box 100 Pack 185.00 18,500.00 Cotton Balls , 300 Pcs. / Pack 1000 Pack 95.00 95,000.00 Delivery Room Gloves, Non-powdered, Size 7.5, Elbow Length 300 Pairs 410.00 123,000.00 Delivery Room Gloves, Sterile, Non-powdered, Size 7, Elbow Length 300 Pairs 370.00 111,000.00 Disinfectant Spray, Antibacterial, 12 Oz. (340g) Ethanol 60% 300 Can 565.00 169,500.00 Disposable Laparotomy Pack For C/s, Sterile 50 Pack 2,000.00 100,000.00 Dressing Pack, Sterile With Expiry Date 2000 Pack 105.00 210,000.00 Ecg Electrodes , Adult 5000 Pcs 13.00 65,000.00 Ecg Electrodes , Neonate 200 Pcs 11.00 2,200.00 Ecg Electrodes , Pediatric 2000 Pcs 11.00 22,000.00 Ecg Paper 80 Mmx 20 Mm 300 Roll 245.00 73,500.00 Endotracheal Tube Holder , Adult 150 Pcs 250.00 37,500.00 Endotracheal Tube With Cuff Size 5.5 20 Pcs 50.00 1,000.00 Endotracheal Tube With Cuff Size 6.0 20 Pcs 50.00 1,000.00 Endotracheal Tube With Cuff Size 6.5 35 Pcs 55.00 1,925.00 Endotracheal Tube With Cuff Size 7.0 50 Pcs 55.00 2,750.00 Endotracheal Tube With Cuff Size 7.5 150 Pcs 55.00 8,250.00 Endotracheal Tube With Cuff Size 8.0 150 Pcs 55.00 8,250.00 Endotracheal Tube With Soft Cuff Size 5.0 20 Pcs 50.00 1,000.00 Endotracheal Tube Without Soft Cuff Size 2.0 50 Pcs 55.00 2,750.00 Endotracheal Tube Without Soft Cuff Size 2.5 50 Pcs 55.00 2,750.00 Endotracheal Tube Without Soft Cuff Size 3.0 50 Pcs 55.00 2,750.00 Endotracheal Tube Without Soft Cuff Size 3.5 50 Pcs 55.00 2,750.00 Endotracheal Tube Without Soft Cuff Size 4.0 20 Pcs 50.00 1,000.00 Endotracheal Tube Without Soft Cuff Size 4.5 20 Pcs 50.00 1,000.00 Epidural Set, Touhy Bevel, Diameter 1.30 X 80 Mm, (18 G), Ø 0.85 X Ø 0.45 X 1000 Mm (20g), With Filter 50 Set 2,000.00 100,000.00 Extension Tubing , With 3 Needle Free Connections 500 Pcs 380.00 190,000.00 Extension Tubing , With Needle Free Connections 500 Pcs 104.00 52,000.00 Face Mask, With Earloop, 50's/box 1000 Box 100.00 100,000.00 Fiber Optic Bulb For Laryngoscope 10 Pcs 3,200.00 32,000.00 Foley Bag Catheter, 2 Way, Fr.10 20 Pcs 40.00 800.00 Foley Bag Catheter, 2 Way, Fr.12 50 Pcs 40.00 2,000.00 Foley Bag Catheter, 2 Way, Fr.14 500 Pad 40.00 20,000.00 Foley Bag Catheter, 2 Way, Fr.16 1030 Pcs 50.00 51,500.00 Foley Bag Catheter, 2 Way, Fr.18 250 Pcs 40.00 10,000.00 Foley Bag Catheter, 2 Way, Fr.22 100 Pcs 40.00 4,000.00 Foley Bag Catheter, 2 Way, Fr.24 100 Pcs 40.00 4,000.00 Foley Bag Catheter, 2 Way, Fr.5 25 Pcs 40.00 1,000.00 Foley Bag Catheter, 2 Way, Fr.8 25 Pcs 40.00 1,000.00 Foley Bag Catheter, 3 Way, Fr.16 50 100.00 5,000.00 Foley Bag Catheter, 3 Way, Fr.22 50 Pcs 100.00 5,000.00 Foley Bag Catheter, 3 Way, Fr.24 100 Pcs 100.00 10,000.00 Foley Bag Catheter, 3-way, Fr. 18 50 Bot 100.00 5,000.00 Gauze, Absorbent, 36x100yrds 24 X 28mesh 350 Roll 1,300.00 455,000.00 Gel Ultrasound 10 Gal 800.00 8,000.00 Gloves, Orthopedic, Sterile, Size 7 , Powder Free 50 Pairs 50.00 2,500.00 Gloves, Non-sterile, Nitrile, Large 20000 Pairs 9.00 180,000.00 Gloves, Non-sterile, Nitrile, Medium 30500 Pairs 9.00 274,500.00 Gloves, Non-sterile, Nitrile, Small 30000 Pairs 9.00 270,000.00 Gloves, Orthopedic, Sterile, Size 7 1/2, Powder Free 200 Pairs 50.00 10,000.00 Gloves, Sterile #6 , Powder Free Latex 5000 Pairs 22.00 110,000.00 Gloves, Sterile #6.5,powder Free, Latex 14500 Pairs 22.00 319,000.00 Gloves, Sterile #7 1/2, Powder Free , Latex 13500 Pairs 22.00 297,000.00 Gloves, Sterile #7, Powder Free, Latex 10000 Pairs 22.00 220,000.00 Gloves, Sterile #8, Powder Free, Latex 500 Pairs 22.00 11,000.00 Gluco Strip, Plus Test Strips With Free Lancet, Pricking Pen And Glucometer In Every 50 Packs, 50 Strip/pack 1000 Pack 1,100.00 1,100,000.00 Heat- Sealing Sterilization Pouch W/ Indicator 100mmx100m 10 Roll 1,200.00 12,000.00 Heat- Sealing Sterilization Pouch W/ Indicator 150mmx100m 5 Roll 1,700.00 8,500.00 Heat- Sealing Sterilization Pouch W/ Indicator 8"x100's, Sps 3 Roll 2,500.00 7,500.00 Hot Water Bag-rubber Medium 100 Pcs 100.00 10,000.00 Hydrogen Peroxide, 10 Vol, 120 Cc/bot. 500 Bot 50.00 25,000.00 I.v. Macroset With Airvent, 3-way Port, Needleless 5000 Pcs 100.00 500,000.00 I.v. Microset With Airvent, 3-way Port, Needleless 1500 Pcs 115.00 172,500.00 Ice Bag 6" 50 Pcs 80.00 4,000.00 Infusomat Space Line (macroset), Type Iv-injection-neutrapur, Luer Lock, Good Quality 250 Pcs 795.00 198,750.00 Injection Pad, 36mm Defries B100 500 Pcs 30.00 15,000.00 "intravenous Cannula G18, With Safetouch Wing Cath Without Injection Port 18gx1-1/4"" (32mm) " 5000 Pcs 100.00 500,000.00 "intravenous Cannula G20, With Safetouch Wing Cath Without Injection Port 20gx1-1/4"" (32mm) " 10000 Pcs 100.00 1,000,000.00 "intravenous Cannula G22, With Safetouch Wing Cath Without Injection Port 22gx1"" (25mm) " 5000 Pcs 100.00 500,000.00 "intravenous Cannula G24, With Safetouch Wing Cath Without Injection Port 24gx3/4"" (19mm) " 10000 Pcs 100.00 1,000,000.00 "intravenous Cannula G26, With Safetouch Wing Cath Without Injection Port 26gx3/4"" (19mm) " 3000 Pcs 100.00 300,000.00 Intubating Stylet Fr 10, 3.3mm Guide Wire) 100 Pcs 150.00 15,000.00 Intubating Stylet Fr 12, ( Guide Wire) 50 Pcs 150.00 7,500.00 Intubating Stylet Fr 14 ,4.6mm (guide Wire) 200 Pcs 150.00 30,000.00 Intubating Stylet Fr 6, 2.0mm (guide Wire) 50 Pcs 188.00 9,400.00 Iv Splint -neonate 350 Pcs 50.00 17,500.00 Iv Splint -pedia 500 Pcs 50.00 25,000.00 Iv Splint-adult 500 Pcs 70.00 35,000.00 Iv Start Pack 1500 Pcs 90.00 135,000.00 Iv Transparent Dressing, With Delivery Frame System, Breathable, Hypoallergenic, Waterproof, Impermeable To Bacteria And Viruses, Best For Neonates, 6x7cm, 100 Pcs Per Box 300 Pcs 40.00 12,000.00 Iv Transparent Dressing, With Delivery Frame System, Breathable, Hypoallergenic, Waterproof, Impermeable To Bacteria And Viruses, With Sterile Soft Cloth Tape Strips, Latex Free Best For Pediatric, 5cm X 5.7cm, 100 Pcs Per Box 150 Pcs 55.00 8,250.00 Jackson Pratt (suction Reservoir Cup), 100ml 100 Pcs 1,000.00 100,000.00 Kn95, Medical Grade, 5 Layers 1500 Pcs 8.00 12,000.00 Lubricating Gel, 150gm 80 Tube 150.00 12,000.00 Mesh, Premiline 5 Pcs 2,470.00 12,350.00 Mini Spike, Dispensing Pin 50 Pcs 150.00 7,500.00 Mortar And Pestle, Ceramic 5 Pcs 300.00 1,500.00 Mucus Extractor 150 Pcs 100.00 15,000.00 N95 Mask 10000 Pcs 90.00 900,000.00 Nebulizer Tubing Kit 3000 Pcs 50.00 150,000.00 Needle, Disposable Im G.18 10000 Pcs 2.50 25,000.00 Needle, Disposable Im G.23 500 Pcs 2.50 1,250.00 Needle, Disposable Im G.26 1000 Pcs 2.50 2,500.00 Needle, Pen For Insulin Pen 250 Pcs 18.00 4,500.00 Needleless Heplock, Polyprolene Body, Safetouch Plug 5000 Pcs 92.00 460,000.00 Oxygen Cannula Pedia 500 Pcs 30.00 15,000.00 Oxygen Cannula, Adult 1500 Pcs 30.00 45,000.00 Oxygen Cannula, Neonate 300 Pcs 30.00 9,000.00 Oxygen Mask, Adult W/ Tubing Disposable 500 Pcs 45.00 22,500.00 Oxygen Mask, Adult, Non-rebreather 300 Pcs 85.00 25,500.00 Paper Sterilizer 90x90 Cm 2000 Roll 25.00 50,000.00 Patient's Kit 1000 Set 350.00 350,000.00 Penrose Drain, Cigarette ,sterile, Size 1/2" 50 Pcs 30.00 1,500.00 Penrose Drain, Cigarette ,sterile, Size 1/4" 30 30.00 900.00 Plaster Of Paris ,4 Inches 50 Pcs 90.00 4,500.00 Plaster Of Paris ,6 Inches 50 Pcs 90.00 4,500.00 Plaster, Adhesive, Universal Surgical Tape, Assorted Size 500 Tube 3,500.00 1,750,000.00 Plaster, Paper Tape, Hypoallergenic, Non-latex, Non-woven With Strong Adhesion, 1/2 Inch Width And 10 Yards In Length, 24pcs Per Box 2000 Roll 55.00 110,000.00 Povidone Iodine, Cleanser 7.5%, 3.785 Ltrs 100 Gal 1,350.00 135,000.00 Povidone, Iodine Antiseptic Solution 10%. 3.785 Ltrs/gal 100 Gal 1,350.00 135,000.00 Razor, Disposable 1500 Pcs 20.00 30,000.00 Reinforce Skin Closures, 1/4" X 4', 6mmx100mm, Sterile 50 Pcs 130.00 6,500.00 Shoe Cover 1000 Pcs 2.50 2,500.00 Sodasorb 3 Pail 15,000.00 45,000.00 Solution Administration Set, Soluset, 150cc, Sterile 250 Pcs 150.00 37,500.00 Spinal Needle # 25 500 Pcs 93.00 46,500.00 Spinal Needle # 26 50 Pcs 93.00 4,650.00 Suction Catheter Fr.10 100 Pcs 18.00 1,800.00 Suction Catheter Fr.12 100 Pcs 18.00 1,800.00 Suction Catheter Fr.14 1000 Pcs 18.00 18,000.00 Suction Catheter Fr.16 1000 Pcs 18.00 18,000.00 Suction Catheter Fr.18 1000 Pcs 18.00 18,000.00 Suction Catheter Fr.5 300 Pcs 18.00 5,400.00 Suction Catheter Fr.8 3000 Pcs 18.00 54,000.00 Suction Set Pool Drain 1000 Pcs 275.00 275,000.00 Surgical Blade #10 1000 Pcs 5.00 5,000.00 Surgical Blade #11 500 Pcs 5.00 2,500.00 Surgical Blade #15 100 Pcs 5.00 500.00 Surgical Blade #20 500 Pcs 5.00 2,500.00 Surgical Cap, 100 Pcs/pack (bouffant) 10000 Pcs 1.20 12,000.00 Surgical Stapler/ Skin Stapler (for Every 10 Staplers Plus 1 Remover) 20 Pcs 500.00 10,000.00 Suture, Chromic 2- 0, With Round Needle 480 Pcs 120.00 57,600.00 Suture, Chromic Catgut 0, With Round Needle 150 Pcs 120.00 18,000.00 Suture, Chromic 3-0 , 75 Cm, Needle Size 26mm, With Round Bodied Needle 250 Pcs 110.00 27,500.00 Suture, Chromic 4-0 With Round Bodied 50 Pcs 110.00 5,500.00 Suture, Polyamide 3-0 , 45cm, Needle Size 26mm, With Cutting Needle 200 Pcs 200.00 40,000.00 Suture, Polyamide, 4-0 With Cutting Needle 100 Pcs 188.00 18,800.00 Suture, Polygactin 2-0, Round, 150 Pcs 340.00 51,000.00 Suture, Polygactin 6-0, 45cm, Needle Size11mm, With Reverse Cutting Needle 30 Pcs 518.00 15,540.00 Suture, Polygactin 6-0, 70cm, Needle Size 17mm, Round Needle 62 Pcs 518.00 32,116.00 Suture, Polygactin 910 Plus 0, 36", Needle Size 36mm, Round, 1000 Pcs 470.00 470,000.00 Suture, Polygactin 910 Plus 4-0,70cm, Needle Size 22mm, Atr Round Needle 200 Pcs 370.00 74,000.00 Suture, Polygactin 910, Plus 3.0 Atr, Round Needle (intestinal) 27", Needle Size 24mm 200 Pcs 410.00 82,000.00 Suture, Polyprolene 2-0,blue Monofilament, Round 32 300.00 9,600.00 Suture, Polyprolene 0,blue Monofilament, Round 12 370.00 4,440.00 Suture, Polyprolene 3-0, 75 Cm, Needle Size 17mm, Blue Monofilament, Round 270 Pcs 300.00 81,000.00 Suture, Polyprolene 3-0, Blue Monofilament, Cutting 30 Pcs 560.00 16,800.00 Suture, Polyprolene 4-0, 75 Cm, Round Needle, Size 17 Mm, Blue Monofilament 32 Pcs 1,150.00 36,800.00 Suture, Polyprolene 5-0, Cutting Needle 12 Pcs 560.00 6,720.00 Suture, Polyprolene 6-0, 60 Cm, Cutting Needle, Size 9.3 Mm, Blue Monofilament 12 Pcs 560.00 6,720.00 Suture, Polyprolene 6-0, 60 Cm, Round Needle, Size 9.3 Mm, Blue Monofilament 12 Pcs 560.00 6,720.00 Suture, Silk 0, Braided, 15x60m, Black, W/o Needle 60 Pcs 175.00 10,500.00 Suture, Silk 1-0, Round, 75cm, Needle Size 40mm, Round Bodied Needle 12 Set 125.00 1,500.00 Suture, Silk 2-0, Braided , 15x60cm, W/o Needle 200 Pcs 175.00 35,000.00 Suture, Silk 2-0, Round, 75cm, Needle Size 40mm, Round Bodied Needle 32 Pcs 125.00 4,000.00 Suture, Silk 3-0 , 75cm, Needle Size 26mm, W/ Round Needle 100 Pcs 110.00 11,000.00 Suture, Silk 4-0, 75cm, Needle Size 22mm, Cutting Needle 60 Pcs 110.00 6,600.00 Suture, Silk 4-0, 75cm, Needle Size 22mm, Round Needle 100 Pcs 110.00 11,000.00 Suture, Silk 4-0, W/ Out Needle 60 Pcs 115.00 6,900.00 Syringe, Asepto,60 Ml. 300 Pcs 45.00 13,500.00 Syringe, Disposable 20cc 5000 Pcs 20.00 100,000.00 Syringe, Disposable 50cc 3000 Pcs 20.00 60,000.00 Syringe, Disposable, 10cc 50000 Pcs 12.00 600,000.00 Syringe, Disposable, 1cc 3000 Pcs 10.00 30,000.00 Syringe, Disposable, 3cc 50000 Pcs 8.00 400,000.00 Syringe, Disposable, 5cc 3000 Pcs 9.00 27,000.00 Syringe, Insulin 20000 Pcs 10.00 200,000.00 Thermometer 3000 100.00 300,000.00 Tongue Depressor, Wooden, Individually Packed, Sterile 5000 Pcs 1.00 5,000.00 Tracheostomy Holder 50 Pcs 2,000.00 100,000.00 Tracheostomy Tube, With Inner Cannula, Size 6 5 Pcs 3,500.00 17,500.00 Tracheostomy Tube, With Inner Cannula, Size 7 5 Pcs 3,500.00 17,500.00 Tracheostomy Tube, With Inner Cannula, Size 7.5 5 Pcs 3,500.00 17,500.00 Tracheostomy Tube, With Inner Cannula, Size 8 5 Pcs 3,500.00 17,500.00 T-tube, Drainage, Silicone Fr. 14 20 Pcs 300.00 6,000.00 T-tube, Drainage, Silicone Fr. 16 50 Pcs 300.00 15,000.00 T-tube, Drainage, Silicone Fr. 18 50 Pcs 300.00 15,000.00 Tube, Ngt Fr. 10, Nasogastric 10 Pcs 15.00 150.00 Tube, Ngt Fr. 12, Nasogastric 30 Pcs 15.00 450.00 Tube, Ngt Fr. 14, Nasogastric 50 Pcs 15.00 750.00 Tube, Ngt Fr. 16, Nasogastric 300 Pcs 15.00 4,500.00 Tube, Ngt Fr. 18, Nasogastric 300 Pcs 15.00 4,500.00 Tube, Ngt Fr. 5, Nasogastric 300 Pcs 15.00 4,500.00 Tube, Ngt Fr. 8, Nasogastric 500 Pcs 15.00 7,500.00 Underpads (adult) 60x90 Cm, 80g 10000 Pcs 30.00 300,000.00 Urinal, Male, Plastic 200 Pcs 90.00 18,000.00 Urine Bag, 1000-2000 Ml Capacity 500 Pcs 35.00 17,500.00 Urine Collector 500 Pcs 5.00 2,500.00 Volumetric Set Space Line (compatible For Bbraun Machine) 100 Pcs 865.00 86,500.00 Wadding Sheet Size 4 X 5 150 Roll 40.00 6,000.00 Wadding Sheet Size 6 X 5 150 Roll 40.00 6,000.00 Wristlet Newborn Pink 1000 Pcs 3.00 3,000.00 Wristlet Newborn Blue 500 Pcs 3.00 1,500.00 Wristlet, Adult, Blue 2500 Pcs 4.00 10,000.00 Wristlet, Adult, Pink 1500 Pcs 4.00 6,000.00 Wristlet, Pedia, Blue 200 Pcs 3.00 600.00 Wristlet, Pedia, Pink 300 Pcs 3.00 900.00 Yankauer Suction Set, Connecting With Handle 25 Pcs 175.00 4,375.00

Details: Description Project : Repair And Improvement Of The Comfort Room And Office Of The Board Member - Darab Location: Darco Compound, Elliptical Rd. Quezon City Duration: 15c.d. Item No. Items & Description Unit Qty Unit Price Total Price I Demolition & Removal Works 16.74 Sq.m Demolition Of Existing Comfort Room Ceiling Chipping Of Existing Comfort Room Tiles Removal Of All Plumbing Fixtures Ii Tile Works 24.43 Sq.m Homogeneous Porcelain Wall Tiles 30cm X 60cm (white Color)(cr Wall) 75 Pcs Textured Porcelain Tiles 30cm X 30cm (marble White Color)(cr Flooring)(non-skid) 29 Pcs Tile Adhesive 25kg Per Bag 5 Bags Grout 5kg Per Bag 2 Bags Portland Cement 40kg Per Bag 5 Bags Sand(bistay) 2 Cu.m Water Proofing Compound 908g Per Bag 5 Bag Tile Spacer (200 Pcs Per Pack) 4 Packs Wooden Pvc Vinyl Tiles 910mm X 150mm X 2mm (narra Ply Textured) Acrylic Flooring Adhesive 5kg Per Gallon 3 Gallons Labor Iii Painting Works 10 Sq.m Flat Latex Paint Primer (white) 4l 6 Gallons Semi-gloss Latex Top Coat (white) 4l 6 Gallons Flat Wall Enamel (white)4l 2 Gallons Wall Putty 4l 2 Gallons Roller Brush 7” 5 Pcs Baby Roller 4” 8 Pcs Paint Brush 1” 6 Pcs Paint Brush 1-1/2” 6 Pcs Paint Brush 4” 3 Pcs Sandpaper #100 Waterproof 15 Pcs Sand Paper #120 Waterproof 20 Pcs Sand Paper #240 Waterproof 30 Pcs Paint Thinner 4l 2 Gallons Lacquer Thinner 4l 2 Gallons Labor Iv Plumbing Works 1 Lot Water Closet With Complete Fixture & Accessories 1 Set Over The Counter Lavatory Set (ceramic)(white) With Faucet (stainless), Complete Fitting & Accessories 1 Set Stainless Floor Drain 4” 1 Pc Pvc Solvent Cement 400cc 1 Can Joining Epoxy A And B 4l 1 Can White Latex Adhesive Caulk 2 Pcs Elastomeric Sealant 1l 1 Can Teflon Tape (19mm X 15m X 0.2mm) 3 Pcs Ceramic Tissue Holder 1 Pc Bidet Stainless 1 Pc Angle Valve (3-way W/ Control Each, ½”dia X ½”dia) 1 Pc P-trap For Lavatory 2” 1 Pc Tail Piece 1-1/4” 1 Pc Stainless Steel Door Lock Set 2 Pcs Labor V Electrical Works 2 Gang Switch (universal) 1 Pc 15watts Round Pin Light Led 6” Diameter 1 Pc Electrical Tape 0.16mm X 19mm X 16m 1 Pc Insulation Tape 0.16 X 19mmx 16m 1 Pc Pvc Junction Box (2” X 4”) 4 Pcs 2-gang Convenience Outlet (ordinary) 3 Pc Thhn/thwn-2(3.5mm2 Stranded) 25 L.m Utility Knife Cutter (25 X 140mm) 2 Pcs Flexible Hose ½ 50m Per Roll 1 Roll Labor Vi Ceiling Works 2.31 Sq.m Metal Furring (ga 24/0.60mm) 2 Pcs Carrying Channel (ga 24/0.60mm) 2 Pcs Double U-clip 7 Pcs Wall Angle (ga 24) 3 Pcs Blind Rivets 1/8”dia X ½” (150pcs Per Box) 1 Box Gypsum Board (12mm) 2 Roll Gypsum Mesh Tape 45m Per Roll 1 Roll Gypsum Black Screws 1” (100 Pcs Per Box) 1 Box Ceiling Exhaust Fan 8” 1 Set Drill Bit 6mm Ø 5pcs/set 1 Set Labor Total: Abc: Mode Of Procurement: End User: Payment Mode: Php 163,593.35 Small Value Procurement (section 53.10) Darab Bm Iii Government Terms The Submitted Price Quotations Should Be Subject To The Terms And Conditions Of This Rfq (see Annex “a”) Supplier/bidder’s Company Name Tin Address Contact No. Email Add Supplier/bidder’s Name/authorized Representative Signature Over Printed Name Date Request For Quotation (rfq) – Small Value Procurement (section 53.10) A. Eligibility Requirements 1. Completely Filled-up And Duly Signed Quotation Must Be Submitted At The Procurement Division, Dar Central Office, Ground Floor Elliptical Road, Diliman, Quezon City Or Through Darco.bacsecretariat.b@dar.gov.ph. 2. Quotation Shall Be Submitted With The Following Requirements, To Wit: A. Copy Of Valid Mayor’s/business Permit B. Copy Of Philgeps Registration Number/ Philgeps Platinum C. Income/business Tax Return D. Philippine Contractors Accreditation Board (pcab) License E. Joint Venture Agreement, If Applicable F. Omnibus Sworn Statement G. In Case The Owner Is Not The Signatory Of Price Quotation Form I. Special Power Of Authority - For Single Proprietorship Ii. Secretary’s Certificate - For Corporation/partnership/joint Venture

Details: Description Supply And Delivery Of 4 Units Four-wheel Drive Tractor Abc: P19,600,000.00 A. Prime Mover - Rated Power: 67.14 Kw Hp, Minimum - No Of Cylinder: 4 Cylinder - Stroke And Cycle: 4 Stroke Cycle - Cooling System: Water-cooled - Fuel Injection System: Direct Injection - Fuel Ignition/fuel: Diesel B. Performance/classification - Hitch Category: Category 2&3 - Hydraulic Lift: 15 Kn, Minimum - Pto Power: 85% Of The Engine's Maximum Power, Minimum - Specific Fuel Consumption @ Max. Pto Power: 280g/kw-hr, Maximum - Aspiration Method: Turbocharged - Steering System: Hydraulic Power/full Hydrostatic - Steering System: Hydraulic Power/full Hydrostatic - Transmission System: 8f/2r, With Differential Lock - Brake System: Hydraulic/mechanical - No. Of Drive: 4 Wheel Drive - Noise Level: 90db (a), Maximum C. Accessories - With Roll Over Protective Structure (rops), Seatbelt, Canopy, Three-point Linkage: Category 1, Pto Casing/cover - With Set Of Heavy Duty Tools: A. One (1) Set Of Open Wrench (size:6-32mm, Minimum) B. (for Items B, Which Ever Is Compatible To The Offered Units) One (1) Set Allen Type Wrench (for Star And Hexagon) / One (1) Piece Each Or Combination Of Philips And Flat Screw Driver C. One (1) Pair Of Mechanical Pliers D. One (1) Piece Adjustable Wrench (size:12, Minimum) E. One (1) Piece Grease Gun (100cc, Minimum) F. One (1) Piece Tire Wrench (compatible To The Offered Units, At Least 2 Different Sizes) G. One (1) Piece Hydraulic Jack - With Heavy-duty Toolbox That Can Accommodate All Of The Abovementioned Items Except Hydraulic Jack And Tire Wrench. - With Original Equipment Manufacturer (oem) Manual - With Slow Moving Emblem At The Back Of The Tractor - With Early Warning Device - Hydraulic Control Valve: Auxillary Or Integral D. Implement Disc Plow: - Width Of Cut:1,100mm, Minimum - No. Of Disc/blade: 4 - Average Depth Of Tillage: 190 Mm, Minimum - Actual Field Capacity: 0.4 Ha/hr, Minimum - Diameter: 26 Inches - Field Efficiency: 85%, Minimum - Fuel Consumption: 11l/hr, Maximum Harrow: - Average Width Of Tillage: 1700 Mm ,minimum - No. Of Disc/blade: 20, Minimum - Actual Field Capacity: 1 Ha/hr, Minimum - Diameter Of Blade: 24 Inches, Minimum - Field Efficiency: 90%, Minimum Trailer: - Capacity: 5 Tons, Minimum - Tire: 7.5x16, 8pr, Pneumatic, Must Be Manufactured Not Earlier Than Year 2024 - Dimension: 10 Ft X 6ft X 2ft (lxwxh) - Rim: Ring-lock Type - Tow Bar Is Parallel To The Ground When Attach To Tractor Hitch With Tailgate - With Leaf Spring Suspension Corn Seeder With Fertilizer Applicator - Effective Field Capacity: 0.75ha/hr, Minimum - Seeding Rate: 20 Kg/ha, Minimum - Mechanism: Pneumatic - No. Of Rows : 4 Rows, Minimum - With Adjustable Hill/row Spacing And Depth Hill Spacing At Least 15-30 Cm Row Spacing :70+- 10 Cm - Missing Hills: 8%, Maximum - With Replaceable Seed Plates: 2 Sets, Minimum E. Warranty: 1 Year Warranty On Parts And Services And Two (2) Years On The Engine F. Other Requirements: - With Da Logo (all Weather Type Sticker (vinyl Sticker), 10 Inches In Diameter) - With Amtec Test Result For Tractor Alone - With Amtec Test Result For Disc Plow Coupled With Tractor - With Amtec Test Result For Disc Harrow Coupled With Tractor - With Amtec Test Result For Corn Seeder With Fertilizer Apllicator Coupled With Tractor - With Certificate Of Conformity For Tractor - With Namdac Certificate - With Pto Certificate By Bafe - Materials And Other Components Shall Be All Brand New - Shall Provide Diesel Fuel (at Least Half Of Tank Capacity) And Engine Oil In Every Units - Specification Should Be Signed And Sealed By An Abe With Valid Prc Id And Ptr - Bidder Should Have Service Center (owned And Managed) Within Region12 - The Technicians Of The Mfaddies And Or Its Accredited Service Center Must Have A Tesda National Certificate Ii(ncii) Relevant To The Job Or An In House Training. - No Reported Major Breakdown For Products Under Warranty In The Last 72 Hours Upon Receipt Of Complaint/s - Control Instructions And Label Of The Machine & Engine Should Be In English - Must Conduct Training In Operations And Maintenance On Recipient/s D. Warranty - One (1) Year For Machine And Two (2) Years For The Engine Delivery Period: 45 Calendar Days Delivery Sites: Da Tupi Res, Tupi, South Cotabato Note: All Units Shall Be Inspected @ Da-tupi Res, Including The Conduct Of Acceptance Testing & Operations And Maintenance Training To The Recipient. Units Must Be Delivered To The Recipients (see Annex A) After The Conduct Of Operation And Maintenance Training. Cost Of Bidding Documents: P25,000.00 1. During Buying Of Bidding Document: Must Submit Letter Of Intent (loi) And Present The Following Eligibility Document: A. Certificate Of Registration From Philgeps (platinum Membership) B. Registration Certificate From Sec/dti/cda C. Mayor/business Permit D. Tax Clearance 2. In Case Of Representative: Must Submit A Copy Of Board Resolution Or Secretary’s Certificate/special Power Of Attorney Whichever Is Applicable Coupled With Specimen Signature.

Details: Description Lot I - Airconditioning & Refrigeration Supplies 297,115.00 1 1 Tank Acetylene With Tank (new) 2 10 Length Angle Bar, 3/16" X 1/2" X 6m 3 10 Pcs Box, Surface Utility Box 4 10 Pcs Breaker, Circuit Breaker, Rail Type, 20a, With Plastic Enclosure 5 10 Pcs Breaker, Circuit Breaker, Rail Type, 30a, With Plastic Enclosure 6 10 Pcs Capacitor, Running Capacitor 40µf, 400vac 7 10 Pcs Capacitor, Starting Capacitor 100µf, 250vac 8 10 Unit Condensate Removal Pump (drain Pump), For Split Type Air Conditioning Unit, 3m Maximum Discharge Head, Capacity 400cc, Ac 220v-240v, 50/60hz, Temp. Range: 0°-50°c Max, Dimension: 18cm (l) X 12cm (w) X 14cm (h), Drain Pipe Size: Ø4.3mm X Ø6.5mm (5/32") 9 100 Pcs Expansion Bolt 3/8" X 2" 10 10 Pcs Filter Drier 1/4 (flare Type) 11 2 Roll Flexible Hose 1/2" X 100m 12 2 Set Full Body Safety Harness, Constructions Adjustable Belt With Hook, Heavy Duty 13 10 Pcs Magnetic Contactor, 30a, Single Phase, 450vac 14 1 Tank Nitrogen With Tank (new) 15 10 Pcs Outlet, 1-gang Aircon Outlet 250v/20a, Wide Series 16 50 Pcs Pipe, Red Orange Electrical Upvc Conduit Pipe 1/2" 17 2 Set Pressure Washer Pump Head W/ Accessories 18 3 Roll Pressure Washer Hose 10meters 19 5 Pcs Potential Relay A4d3 20 1 Tank Refrigerant, Freon Gas 600a 21 1 Tank Refrigerant, Freon Gas R-22 22 1 Tank Refrigerant, Freon Gas R-32 23 1 Tank Refrigerant, Freon Gas R410 (11.3kg) 24 2 Pck Access Valve 1/4" (10s) 25 10 Length Rubber Insulation 7/8" X 3/8" X 6' 26 20 Length Rubber Insulation 5/8" X 1/2" X 6' 27 2 Bottle Rugby 350ml 28 5 Roll Tape, Aero Tape (insulation Tape), 3mm Thickness, 50mm Width, 30ft Long 29 20 Pcs Tape, Electrical Tape (big) 60 Mtrs 30 3 Box Wire, Thhn Wire 2.0mm² (150m) 31 3 Box Wire, Thhn Wire 5.5mm² (150m) 32 4 Box Wire, Thwn Wire 3.5 (150m) Total For Lot I Lot Ii - Generator Set Supplies 421,200.00 1 10 Units Battery Set, Generator Battery 4d-n150l, 12v, 150ah 2 6 Units Battery Set, Generator Battery (38b19l) 12v 36ah Cca 310a 3 2 Units Battery Set, 17 Plates, 12 Volts, 100 Ah For 150 & 110kva Genset 4 10 Pail Coolant (genset) 5 2 Pcs Filter, Fuel Filter (150kva Genset) 21-1105020-937 6 2 Pcs Filter, Fuel Filter (110kva Genset) Primary-551329 7 2 Pcs Filter, Fuel Filter (110kva Genset) Secondary-553004 8 4 Pcs Filter, Fuel Filter 3329289 (fs1000) 350kva & 500kva Genset 9 2 Pcs Filter, Oil Filter (150kva Genset) L3000-1012020 Jx1023a1 Yjx-6331 10 2 Pcs Filter, Oil Filter (110kva Genset) 558615 11 2 Pcs Filter, Oil Filter 3401544 (lf9009) 350kva Genset 12 2 Pcs Filter, Oil Filter 3889310, 500kva Genset 13 2 Pcs Filter, Coolant Filter 4058965 (wf20761) 350kva & 500kva Genset Total For Lot Ii Lot Iii - Transport 125,520.00 1 1 Unit Battery, 11 Plates Battery, 12 Volts,d31l, N70zz1, Maintenance Free, L-300 Van 2 1 Unit Battery, 11 Plates Battery, 12 Volts, 380ln3, 70ah, Maintenance Free, Toyota Hiace 3 2 Unit Oil Filter Cup Remover/wrench 4 4 Pcs Filter, Oil Filter Vic C-306, (l-300 Van) 5 4 Pcs Filter, Oil Filter C-111, (commuter) 6 5 Pcs Filter, Air Filter Element 87139-06080 7 5 Pcs Filter, Air Filter Element 17801-31160 8 5 Unit Tire, Tubeless 225/70 R16 (8 Ply), Toyota Commuter Ambulance Total For Lot Iii Grand Total For Lot I, Ii & Iii 843,835.00 Documentary Requirements To Be Submitted Together With The Rfq. (non Submission Of Documentary Requirements Will Be Automatically Disqualified) • Mayor's / Business Permit • Philgeps Registration Number • Omnibus Sworn Statement • Income/business Tax Return • Delivery Period: Twenty (20) Working Days Purpose: Use For Repair And Maintenance Of Wvsgh Facilities.

Details: Description Republic Of The Philippines Province Of Zamboanga Sibugay Municipality Of Roseller T. Lim Invitation To Bid November 07, 2024 To All Interested Bidders: Notice Is Hereby Served That Sealed Bid Be Received For Public Bidding Under The Harmonious Procurement Process In The Office Of The Bids And Awards Committee On December 02, 2024 At Exactly 1:30 Pm For The Following Articles Stated Below; Items & Description Quantity Unit L300 Van With Rescue Amenities And Accessories 1.00 Unit Specifications: 2.2l Diesel 5-speed Manual Fb-type, Utility Van Engine: Type: 2.2l 4 In-line 16-valve Dohc W/ Turbocharged Intercooler System Fuel System: Electronic Crdi (common Rail Direct Injection) Transmission: 5mt Drive: Fr Suspension: Front: Independent Wishbone And Coil Spring Rear: Semi-elliptic Leaf Spring Brakes: Front: Vented Disc Rear: Drums Steering: Gear Type: Ball & Nut Gear Type W/ Power Steering Steering Wheel: 2-spoke Polypropylene Wheels & Tires: 185r14c - 8pr Warranty: Three (3) Years/1,000 Kms. Purpose: Purchase Of Rescue Vehicle For Ldrrm Office R. T. Lim, Zamboanga Sibugay The Tender Document Forms Are Available In The Office Of The Bac/bac Secretariat Effective On November 08, 2024 Office Hours. The Total Estimated Amount Of The Above Stated Supplies Equivalent To One Million Five Hundred Thousand Pesos Only (php1,500,000.00). Please Be Reminded That The Bac Have The Right To Rejecte Any Or All Bids And Accept Only Those Bids Most Advantageous To The Lgu. Engr. Albert Dela Peña Bac Chairman Republic Of The Philippines Province Of Zamboanga Sibugay Municipality Of Roseller T. Lim Invitation To Bid For The Procurement Of Ldrrm Office Rescue Vehicle, R. T. Lim, Zamboanga Sibugay 1. The Local Government Unit Of Roseller T. Lim, Zamboanga Sibugay, Through The Trust Funds For Cy 2024 Intends To Apply The Sum Of One Million Five Hundred Thousand Pesos (php1,500,000.00) Being The Abc To Payments Under The Contract For Procurement Of Rescue Vehicle For Ldrrm Office, R.t. Lim, Zamboanga Sibugay. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Unit Of Roseller T. Lim, Zamboanga Sibugay Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Thirty (30) Calendar Days. Bidders Should Have Completed, Within Two (2) Years Period From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee (bac) Office Of The Local Government Unit Of Roseller T. Lim, Zamboanga Sibugay And Inspect The Bidding Documents At The Address Given Below During Office Hours 7:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 11, 2024 From The Given Address And Website(s) Below Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Five Hundred Pesos (php1,500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees It Will Be Presented In Person Only. 6. The Local Government Unit Of Roseller T. Lim, Zamboanga Sibugay Will Hold A Pre-bid Conference On November 18, 2024, 10:00 Am At The Municipal Engineering Office, R. T. Lim, Zamboanga, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Open Competitive Bidding (i) Manual Submission At The Office Address Indicated Below, On Or Before December 02, 2024 At Exactly 1:30pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 02, 2024 At Exactly 1:30pm At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Local Government Unit Of Roseller T. Lim, Zamboanga Sibugay Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Engr. Albert Dela Peña Chairman – Bids And Awards Committee Municipal Site, Roseller T. Lim, Zamboanga Sibugay Cp #09067752477 Email Address:rosemarie3ig@gmail.com 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: [indicate Websites] [if Applicable] For Online Bid Submission: [indicate Website] Engr. Albert Dela Peña Bac Chairperson