Valve Tenders

Details: Description Item No. Item & Description Quantity Unit Concrete & Masonry Works 1 Porland Cement Type 1 185 Bags 2 Washed Sand 16 Cu.m. 3 Gravel 3/4" 7 Cu.m. 4 16mm X 6.0m Rsb (grade 40) 37 Pcs 5 10mm X 6.0m Rsb (grade 33) 200 Pcs 6 12mm X 6.0m Rsb (grade 33) 130 Pcs 7 # 16 Tie Wire 39 Kls 8 Chb #4 1726 Pcs 9 Coco Lumber 2" X 2" X 10" 30 Pcs 10 Coco Lumber 2" X 3" X 10" 40 Pcs 11 Cw Nails 4" 6 Kls 12 Cw Nails 2-1/2" 4 Kls 13 Cw Nails 1" 3 Kls 14 Nylon String 3 Roll 15 1/2" X 4" X 8" Marine Plywood 6 Roll 16 Bamboe Poles 30 Pcs 17 Plastic Binders 2 Rolls Steel Works & Roofing Works 18 Welding Rod 80 Kls 19 1.2mm X 2" X 3" C-purlins 32 Pcs 20 3/16" X 1" X 1" Angle Bar 14 Pcs 21 3/16" X 1" Flat Bar 23 Pcs 22 1/4" X 3" X 3" Angle Bar 16 Pcs 23 3/16" X 2" X 2" Angle Bar 13 Pcs 24 Prepainted Long Span Roofing 0.4mm X 9.4m (blue) 12 Pcs 25 Pre-painted Fascia Cover (white) 18 Pcs 26 Pre-painted End Flashing (blue) 10 Pcs 27 Tekscrew 2" 900 Pcs 28 Tek Screw Adaptor 6 Pcs 29 Steel Brush 3 Pcs 30 Epoxy Metal Primer (gray) 6 Pcs 31 Epoxy Reducer 2 Pcs 32 Cut Off Disc 14" 5 Pcs 33 Cutting Disc 4" 20 Pcs Painting Works 34 Flat Wall Latex 11 Gal 35 Semi Gloss Latex 22 Gal 36 Skim Coat 8 Bag 37 Sand Paper 50 Pcs 38 Pain Brush 2 1/2" 4 Pcs 39 Baby Rollers W/pan 4 Pcs Doors And Windows 40 Loose Pin Hinges 2" X 4" 2 Pcs 41 Door Knob Heavy Duty 3 Pcs 42 0.6m X 2.1m Pvc Door With Louver 1 Set 43 0.9m X 2.1m Wooden Panel Door With W/2" X 5" Door Jamb 2 Set 44 1/4" Thk Glass Sliding Window On Aluminum Frame 143 Sqft Tile Works (2nd Floor) 45 60cm X 60cm Glazed Tiles (multi Purpose Area & Office 148 Pcs 46 60cm X 60cm Glazed Tiles (wall) 16 Pcs 47 60cm X 60cm Non-skid Tiles (cr Floor) 8 Pcs 48 Tiles Adhesive 11 Bag 49 Grout 5 Kls Electrical Works 50 Panel Board (60a-main, 1-20a, 3-30a) 1 Set 51 Flexible Hose 3/4 1 Roll 52 Led 12w Watts Bulb W/ Receptacle 6 Pcs 53 2.0mm² Tth Wire 1 Roll 54 3.5mm² Tth Wire 1 Roll 55 5.5mm² Tth Wire 40 I.m. 56 8.0mm² Tth Wire 40 I.m. 57 Electrical Tape (big) 3 Rolls 58 Double Conv. Outlet (flush Type) 4 Pcs 59 1-gang Switch (flush Type) 3 Pcs 60 2-gang Switch (flush Type) 1 Pcs 61 Junction Box 4" X 4" W/ Cover 6 Pcs 62 Utility Box 2" X 4" Pvc 8 Pcs 63 1/2" Pvc Electrical Conduit Elbow (orange) 10 Pcs 64 1/2" Pvc Electrical Pipe (orange) 15 Pcs Plumbing Works 65 Water Closet W/ Fittings 1 Set 66 Lavatory W/ Fittings 1 Set 67 Stainless Floor Drain 4" X 4" 1 Pcs 68 4" Pvc Pipe S-900 5 Pcs 69 4" Pvc Elbow 90° 4 Pcs 70 4" Pvc Elbow 45° 3 Pcs 71 4" Pvc Wye 1 Pcs 72 4" Pvc Tee 8 Pcs 73 4" Pvc Clean Out 2 Pcs 74 2" Pvc Pipe S-900 5 Pcs 75 2" Pvc Elbow 90° 4 Pcs 76 2" Pvc Tee 5 Pcs 77 2" Pvc Wye 3 Pcs 78 2" Pvc P-trap 1 Pcs 79 1/2" Diameter Pvc Blue 8 Pcs 80 1/2" Pvc Ball Valve 1 Pcs 81 1/2" Pvc Elbow 90° 5 Pcs 82 1/2" Pvc Tee 12 Pcs 83 Solvent Cement 400cc 2 Cans 84 Teflon Tape 3 Pcs

Details: Description Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-201 Bidding November 12, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Sixty (60) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 1 1 Unit Passenger Van 2,500,000.00 Passenger Van - Dimension And Weight Overall Dimensions (mm): 5,265 X 1,950 X 1,190 Wheelbase (mm): 3,210 Seating Capacity: 12 Engine: Engine Type 4 Cylinders, In-line Type 16-valve Dohc Engine Displacement (cc): 2,755 Maximum Output (ps/rpm): 176 Ps / 3,400 Rpm Maximum Torque: (nm/rpm) 420 Nm / 1,600 -2,400 Rpm Fuel Type: Diesel Fuel Capacity (l): 70 Transmission: Automatic Power Transmission: 6-speed A/t Interior Steering Column: Manual Tilt And Telescopic Adjustable Steering Wheel Material: 4-spoke, Urethane Steering Wheel Switch: Audio, Telephone, Cruise Control, Voice, Mid Audio System Type: 8inches Display Audio Audio System Function Apple Carplay + Android Auto / Tuner / Usb / Bt Exterior Headlamps: Bi-beam Multi-reflector Halogen With Integrated Turn Lamp Front Foglamps: With Function Power Window: With (driver/front Passenger Auto Up-down) Power Door Lock: With Power Outer Mirrors: Adjust + Retract Steering Wheel Switch: Audio, Telephone, Cruise Control, Voice, Mid Chassis Front Brake/ Rear Brake: Ventilated Discs / Drum Tires: 235 / 65r16c Wheels (size): 7j X 16inches Wheels Alloy Wheel Safety And Security Seatbelts Rear: 2 Pt. Nr (10 Pcs.) Vehicle Security System: Alarm With Immobilizer Camera: With Reverse Camera Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, December 06, 2024 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 1 Of 2 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-201 Bidding November 12, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Sixty (60) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) Others Antenna: Short Pole Meter Gauge: Analog Air Conditioning: Dual, Manual Controls With Rear Vents Speakers: 6 Speakers Shift Level And Knob: Urethane Dash-mounted Steering Type: Variable Power Steering Srs Driver Passenger: With Vehicle Stability: With Brake Assist Hill Start Assist: With Anti Lock Break System: With Color: White Pearl Lto Registration: C/o Supplier Free Items Floor Mat Tint Set Of Tools Early Warning Device Umbrella Free Labor On Its 1st 1000 Kms And 5000 Kms Check Up Three (3) Years Or 100,000 Kms Warranty (whichever Comes First) Please Indicate Brand Of Offer And Attach Complete Technical Brochure In The Eligibility And Technical Proposal Bidders Must Possess Valid Mayor's/business Permit With A Relevant Line Of Business In The Sale Of Motor Vehicles For Use Of Cmo Ewss Under Pr No. 1 Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, December 06, 2024 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 2 Of 2

Description: Public tender Vob/a Air conditioning systems (DIN 18 379); 410 Wastewater, water, gas system Wastewater systems - New construction of a pipe network for condensate drainage from air conditioning units made of PVC-u, total pipe length ... Multi-room air conditioning systems (DIN 18 379); 410 Wastewater, water and gas systems Wastewater systems - New construction of a pipe network for condensate drainage from air conditioning units made of PVC-U, total pipe length approx. 35 m, nominal widths DN 25 to DN 50 - Outdoors with pipe heating, approx. 15 m - Free outlet on roof surface - 2 x fire protection partitions for PVC-U pipes 50 mm Water systems - No water systems are planned 420 Heat supply systems Heat generation systems - 1 x electric wall convector 1500 W as frost protection heating in the technical room 430 Air conditioning systems Ventilation systems - Radial fan for exhaust air DN 100 with motorized control flap, insert volume flow controller - Air filter box EPM1 Ø100mm - Duct smoke detector - Ventilation duct for duct-bound air conditioning of the radome via a precision climate cabinet made of steel, duct parts approx. 27 m², molded parts approx. 12 m² - ventilation pipes for fresh air for radome air conditioning, approx. 6 m spiral-seam pipe Ø100 mm - thermal insulation completely made of flexible elastomer foam 19 mm, approx. 40 m² - 2 ventilation grilles 500x400 mm for floor installation, 2 weather protection grilles Ø100 mm for facade partial air conditioning systems - precision air conditioning unit for radome air conditioning with high requirements for temperature accuracy and dehumidification, nominal cooling/heating output 10.7 kW/7.5 kW, electric heating, cooling via condenser - two split air conditioning units each with nominal cooling/heating output 6.8/7.5 kW as a redundancy circuit - each outdoor unit heated with mounting system and condensate collection tray - refrigerant piping made of copper pipe, total line length approx. 110 m, nominal diameters Ad 10 mm Up to Ad 28 mm, including diffusion-tight thermal insulation, approx. 21 m plus sheet metal cladding in the outdoor area - 6 shut-off valves nominal widths Ad 10 mm up to Ad 28 mm - 6 pieces of fire protection partition for refrigerant lines

Details: This Is A Sources Sought Notice Only. This Is Not A Solicitation Or A Request For Quotation (rfq) And No Contract Or Purchase Order Will Be Awarded From This Notice. There Is No Solicitation, Specifications Or Drawings Available At This Time. military Sealift Command (msc) Is Seeking Eligible Businesses For The Regular Overhaul And Dry Docking (roh/dd) Of The Usns Kanawha (t-ao 196) Commencing On Or About 15 March 2025 For A Period Of One Hundred One (101) Calendar Days. The Usns Kanawha Has An Overall Length Of 677 Ft 6 In, A Beam Of 97 Ft 6 In And A Draft Of 36ft. Work Is To Be Performed At The Contractor’s Facility On Or About The Above-mentioned Dates. Area Of Consideration Is East/gulf Coast. The Estimated Issue Date Of The Solicitation Is On Or About 15 August 2024. major Work Items Associated With This Availability Include: General Services For Ship, Clean And Gas Free Tanks, Voids, Weather Deck Non Skid Renewal, Tao187-csi-tank Deck Overhead Preservation, Tank Repairs From Abs Inspections, Cargo Tank Preservation, Tao187-swi-clean And Gas Free Tanks Voids Cofferdams And Spaces (single Hull Only), Ssdg Engine Service - Bergen (80k Hrs) (scsi), Replace Afff Weather Deck Piping - Zone 3, Heavy Oil Equipment Removal (talt 0852), Lifeboat And Davit Service And Inspection (5 Yr) (ccsi), Drydocking And Undocking The Vessel (2.5 Yr) (ccsi), Propeller Maintenance And Hub Replacement, Overhauling Sea Valves (5 Yr) (ccsi), Underwater Hull Cleaning And Painting - Spot Blast (5 Yr) (ccsi), Freeboard Preservation (2.5 Yr) (ccsi), Unrep Station No 6 Steel Repairs, Hp Air Flask Inspection And Preservation (15 Yr) (csi) after Issuance, Solicitation And Supporting Documents Will Be Made Available On The Sam Website Https://www.sam.gov, As Well As The Piee Module. All Small Businesses, Service-disabled Veteran-owned Small Businesses, Certified Hubzone And Certified 8(a) Small Businesses Are Encouraged To Respond. The Government Will Determine Whether A Set-aside Acquisition In Lieu Of Full And Open Competition Is In The Government’s Best Interest. This Office Anticipates Award Of A Contract On Or About 14 January 2025. The Appropriate Naics Code Is 336611. This Is A Market Research Tool Used To Determine The Availability And Adequacy Of Potential Small Business Sources Prior To Determining The Method Of Acquisition And Issuance Of An Award. The Government Is Not Obligated To And Will Not Pay For Any Information Received From Potential Sources As A Result Of This Sources Sought. It Is Requested That Interested Businesses Submit To The Contracting Office A Brief Capabilities Package Demonstrating Ability To Provide The Requested Items. This Document Shall Provide At A Minimum The Following: company Profile To Include Number Of Employees, Office Location(s), Duns Number, Cage Code And A Statement Regarding Small Business Designation the Facility Where The Work Will Be Performed partnership, Teaming, Joint-ventures Or Mentor Agreements With Any Large Businesses. submission Of A Capabilities Statement Is Not A Prerequisite To Any Future Offerings But Participation Will Assist The Government In Tailoring The Requirement To Be Consistent With Industry. responses Are Due No Later Than 05 July 2024 At 4:00 Pm Eastern Standard Time. Responses Shall Be Sent Via Email Directly To Marcin.krauze.civ@us.navy.mil. Mailed Submissions Of The Capabilities Package Will Not Be Accepted.

Details: Advertisement For Bids St. Bernard Parish Government Department Of Public Works State Of Louisiana Project No.: Dwrlf-3002 Sealed Bids Will Be Received Until The Hour Of 2:00 P.m., On Thursday, December 12, 2024, At The St. Bernard Parish Government Department Of Public Works, 1125 E. St. Bernard Highway, Chalmette, Louisiana, And Opened At 2:00 P.m., At Which Time They Will Be Publicly Read, For Furnishing All Supervision, Labor, Materials, Equipment, Etc., And Performing All Work Necessary For: St. Bernard Dwrlf Project 3.2 – High Service Water Pump Project No.: Dwrlf-3002 To Be A Valid Delivery, Sealed Bids Must Be Delivered Electronic By Central Bidding Or By Hand To St. Bernard Parish Government Department Of Public Works, 1125 E. St Bernard Highway, Chalmette, Louisiana During The Normal Business Hours Of 8:30 A.m. To 4:30 P.m. Monday Through Friday On Or Before 2:00 P.m., Thursday, December 12, 2024. Sealed Bids Delivered To Any Other St. Bernard Parish Government Location Or Other Room Number Prior To The Bid Receipt Deadline Will Not Be Considered. This Project Consists Of Furnishing All Supervision, Labor, Equipment, And Materials Necessary To Install A New High Service Water Distribution Pump Along With Associated Valves, Ductile Iron Piping & Fittings, Electrical Controls, And Site Paving. Each Bid Must Be Accompanied By A Certified Check, Cashier's Check Or Bid Bond Acceptable To The Owner In The Amount Equal To At Least Five Percent (5%) Of The Total Amount Bid And Payable Without Condition To The Owner As A Guarantee That The Bidder, If Awarded The Contract, Will Promptly Execute A Contract In Accordance With All Terms And Conditions Of The Contract Documents. A Pre-bid Conference Will Be Held On Monday, December 2, 2024 At 2:00 P.m., At The St. Bernard Parish Government Department Of Public Works, 1125 E. St Bernard Highway, Chalmette, Louisiana. All Bidders And Sub-contractors Are Encouraged To Attend. The Drawings And Specifications Are On File And Open For Inspection At The St. Bernard Parish Government Department Of Public Works, 1125 E. St Bernard Highway, Chalmette, Louisiana, And May Be Secured From The Office Of Gis Engineering, Llc, 935 Gravier Street, Suite 600, (504) 367-4988, By Only Licensed Contractors Upon Payment Of $100.00 Cost Per Set. Questions About This Procedure Shall Be Directed To The Architect/engineer. Bids May Also Be Viewed And Submitted Online At Www.centralauctionhouse.com. Equal Opportunity In Employment: All Qualified Applicants Will Receive Consideration For Employment Without Regard For Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Genetics, Disability Or Veteran Status. Bidders On This Work Will Be Required To Comply With The President’s Executive Order No. 11246, As Amended. The Requirements For Bidders And Contractors Under This Order Are Explained In The Specifications. St. Bernard Parish Government Is An Equal Opportunity Employer. St. Bernard Parish Government Also Encourages All Small And Minority-owned Firms And Women’s Business Enterprises (dbe’s, Including Mbe’s, Wbe’s And Sbe’s) To Apply. /s/hillary J. Nunez, Jr. Hillary J. Nunez, Jr. Director Department Of Public Works

Details: Description 1 Unit Ambulance Dimension & Height: Overall Dimension (mm) 5265 X 1950 X 1990, Wheel Base (mm) 3210, Seating Capacity 15. Engine: Engine(cc)type 4 Cyclinder, In-line Type 16-valve Dohc, Engine Displacement(ps/rpm) 2,755, Maximum Output (ps/rpm) 176ps/3,400 Rpm, Maximum Torque(nm/rpm) 420 Nm/1,400- 2,600 Rpm, Fuel Type Diesel, Fuel Capacity(l) 70. Transmission: Transmission Manual, Power Transmission 6-speed Manual. Exterior Head Lamps Bi-beam Multi-reflector Halogen With Intergrated Turn Lamp, Front Foglamps Headlamp Intergrated, Function: Power Window With (driver/front Passenger Auto Up-down) Power Door Lock 1, Power Outer Mirrors Adjust + Retract, Chassis: Front Brake/rear Brake Ventilated Discs/ Drum, Tires 215/70 R16c, Wheels(size) 7.1 X 16", Wheels Steel With Full Cap. Safety And Security: Seatbelts Rear 2 Pt. Nr (12pcs), Alarm With Immobilizer. Others: Antenna Short Pole, Meter Gauge Analog, Airconditioning Dual, Front Manual Control, Audio 2-din Cd/ Tuner/mp3/aux/usb/bt, Speakers 4, Steering Wheel 4-spoke, Urethane With Chromes Loop, Steering Column Manual Tilt And Teloscopic Adjustable, Shift Level Knob Urethane Dash-mounted, Power Steering Variable Power Steering, With Srs Driver Passenger, With Anti Lock Break System. Ambulance Equipment: Installed Toplight W/ Siren- Tbd4126 Red/blue, Construct Medical Floor Mounted Cabinet 3 Layer, Installed Fully Collapsible Stretcher W/ Locking Mechanism. Consumables: Oxygen Tank W/ Content 20 Lbs, Wall Mounted Bp Apparatus, First Aid Kit, Oxygen Tank Regulator, Ambubag Combination Adult And Pedia, Minor Surgical Kit, Flash Light Led, Battery, Spineboard Holder. Others: Installed: Fire Extinguisher, Florescent Lamp. I.v. Hook W/ Strap, Single Oxygen Tank Holder, Vinyl Sticker (4 Side Ambulance Name) Checkered Matting, Stainless Bumper Approach, Stainless Lamp Approach, 2 Seater W/ Storage W/ Seatbelt But W/ Backrest, 3 Seater W/ Storage, Seatbelt & Backrest, Acrylic Divider, Tint (black) Lto Registration, Insurance & Tpl. Procurement Of Ambulance Vehicle For Mddrmo Pb 2024-42 1. The Local Government Of Dinalupihan, Through The Local Government Unit Operating Budget 2024 Intends To Apply The Sum Of Two Million Four Hundred Thousand Pesos Only (php2,400,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of Ambulance Vehicle For Mdrrmo. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Of Dinalupihan Now Invites Bids For Procurement Of Ambulance Vehicle For Mdrrmo. Delivery Is Upon Availability Of Unit Including Accessories Stated On Specification Or Maximum Of Thirty Days (30) Days. The Prospective Bidder Must Have Completed, Within The Period Specified In The Invitation To Bid, An Slcc That Is Similar To The Contract To Be Bid, And Whose Value, Adjusted To Current Prices Using The Philippine Statistics Authority (psa) Consumer Price Indices, Must Be At Least Fifty Percent (50%) Of The Abc. 38 Refer To Appendix 9 For The Guidelines In The Determination Of Eligibility Of Foreign Suppliers, Contractors, And Consultants To Participate In Government Procurement Projects. The 2016 Revised Implementing Rules And Regulations 61 However, In The Case Of Expendable Supplies, Said Slcc Must Be At Least Twenty Five Percent (25%) Of The Abc. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 5. Prospective Bidders May Bring Letter Of Intent To Obtain And Acquire Bidding Documents At Municipal Accounting Office, 2nd Flr. Municipal Building, San Ramon, Dinalupihan, Bataan From Eight O’clock In The Morning Until Four O’clock In The Afternoon. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 21, 2024 And Payment Of A Nonrefundable Fee In The Amount Of Five Thousand Pesos (php5,000.00). 6. Pre-bid Conference Will Be Held On November 28, 2024 At 10:00 In The Morning At Bac Office 2nd Floor Municipal Bldg, Dinalupihan, Bataan. 7. Bids Must Be Duly Received By The Bac Secretariat To The Address Below On Or Before December 10, 2024 At 10:00 In The Morning. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be On December 10, 2024 At 10:00 In The Morning At Bac Office 2nd Floor Municipal Bldg, Dinalupihan, Bataan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. All Necessary Documents Must Be Submitted On Date/time As Stated On The Bidding Documents. The Lgu Of Dinalupihan Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Emilia V. Carpio Bac Chairman San Ramon, Dinalupihan, Bataan Tel. No. (047) 240-9040

Details: Description Invitation To Apply For Eligibility And To Bid The Bids & Award Committee Of The Municipality Of Caibiran, Biliran Is Inviting All Interested Bidders On Its Forthcoming Public Bidding For: Project Title : Purchase Of Recue Equipment Location : Mdrrmo, Lgu Of Caibiran, Biliran Delivery Period : 20 W.d. Abc : P500,000.00 Source Of Funds : 70% Drrmf 2024 All Particulars Relative To Eligibility Statement And Screening, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provision Of R.a 9184 And Its Revised Implementing Rules And Regulations (rirr) Item No. Unit Item Description Quantity 1 Unit K12 Rescue Saw 1 Specifications: • 95cc/6-horsepoer 2 Cycle Engine • Active Filtration • Smart Carb Carburetor • Decompression Relief Valve • Starter Unit • Enclosed Transmission 2 Unit Chipping Hammer 2 Specifications: • Impact Energy: 28.8 J • Continuous Power Input: 1,510 W • Impacts Per Minute: 1,450 W 3 Unit Chainsaw 4 Specifications: • Power Source: Gas • Powerhead Weight: 10.1 Lbs • Guide Bar Length: 18 In. • Oilomatic Chain: .325” Rm3 • Engine Power: 3.0 Bhp • Fuel Capacity: 15.9oz • Displacement: 45.4 Cc 4 Lot Collapsible Emergency-rescue Tent 2 Specifications: • Width: 4 Meters • Length 5 Meters • Wall Height: 2.5 Meters • Top Height: 3.5 Meters • Fabric: 600d Oxford Out Cover, 210d Pvc • Inner Layer, Removable 0.45mm Pvc - With Full (4) Windows With Outer Cover - With One (1) Door With Outer Cover And 5 Pcs Rescue Carabiner 20 Specification: • D-shape • Stainless Steel 6 Pcs Rescue Pulley (single) 8 Specifications: • Rope Compatibility: 7- 13 Mm Diameter • Sheave Diameter: 38 Mm • Weight: 144 G • Mbs: 2 X 18 Kn = 36 Kn • Wll: 2 X 4 Kn = 8 Kn • With Certifications 7 Pcs Rescue Pulley (double) 8 Specifications: • Rope Compatibility: 7 -13 Mm Diameter • Sheave Diameter: 38 Mm • Weight: 254 G • Mbs 4 X 9 Kn - 36 Kn • Wll: 4 X 4 Kn – 16 Kn • With Certifications 8 Pcs Rescue 8 Descender 5 Specifications: • Stainless Steel Schedule Of Activities: (1st Posting) Advertisement : November 14, 2024 To November 21, 2024 Bid Evaluation : November 25, 2024 (9:00 Am At The Office Of The Bac Chairman, Municipal Hall Caibiran, Biliran) 1. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Aon-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. 2. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 15, 2024 Until November 22, 2024, Upon Payment Of The Applicable Fee From The Municipal Treasurer, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos. [p500.00] 3. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) Or To The Associated Components Of The Invitation To Bid Provided That Bidders Shall Pay The Applicable Fee Not Later Than The Submission Of Their Bids 4. Bids Must Be Duly Received Together With Official Receipt (o.r.) Issued By The Mun. Treasurer To The Bac Secretary Or To The Bac Chairman On Or Before November 25, 2024 At 9:00 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In The Itb. 5. Bid Evaluation Shall Be On November 25, 2024 At Exactly 9:00 Am At The Office Of The Bac Chairman, Municipal Hall, Caibiran, Biliran. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 6. The Lgu Caibiran Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 7. Checklist Of Eligibility Requirements For Goods Is Hereto Attached: First Envelope (technical Proposal) Note: All Document To Be Submitted To The Bac Must Be Alphabetically Tabbed According To The Technical Proposal (1st Envelope) & Financial Proposal (2nd Envelope) Eligibility Requirements: Class A Documents 1. Philgeps Platinum Registration In Lieu Of Class A Eligibility Documents Under Section 23.1 (a) & 24.1 (a) All Bidders Shall Upload & Maintain In Philgeps A Current & Updated File Of The Following Class A Eligibility Documents: A. Dti/sec/cda Registration B. Mayors Business Permit Or Its Equivalent Documents C. Tax Clearance Per Executive Order 398 Series 2005 As Finally Reviewed & Stamp Approved By The Bir D. Audited Financial Statement 2. Statement Of On-going Contracts 3. Statement Of Single Largest Completed Contract (slcc) 4. Nfcc Computation Of Committed Line Of Credit Class B Documents 1. Jva Or Notarized Statement From The Partners That They Will Enter Into Joint Ventures If Awarded The Contract. 2. Bid Security (form Of Bid Security) 3. Production Delivery Schedule 4. Manpower Requirement 5. After Sales Service/parts, If Applicable 6. Omnibus Sworn Statement In The Prescribed Form Note: Any Missing, Incomplete Or Potentially Insufficient Document In The Above-mentioned Checklist Is A Ground For Outright Rejection Of The Bid. Second Envelope (financial Proposal) 1. Financial Bid Form (include Bid Prices & Bill Of Quantities, As Well As Applicable Price Schedule) 2. Certification If Claiming Preference As Domestic Bidder 3. Other Documents Required In The Bidding Documents Note: Any Missing, Incomplete Or Potentially Insufficient Document In The Above-mentioned Checklist Is A Ground For Outright Rejection Of The Bid 2024philgeps131

Details: Description Section I. Invitation To Bid Reference No.: Da8-infra-2025-01 (pr No. Bt-25-infra-39835-0006) 1. The Department Of Agriculture-regional Field Office No. 8, Through The Rice-2025 Current Fund Intends To Apply The Sum Of Six Million Nine Hundred Twenty-nine Thousand Four Hundred Ninety-five Pesos And 09/100 Only (p6,929,495.09) Being The Approved Budget For The Contract (abc) To Payment For The “supply Of Labor And Materials For The Construction Of Binongto-an Solar Powered Irrigation System (spis) Located At Brgy. Binongto-an, Tanauan, Leyte.” Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture-regional Field Office No. 8, Undertakes The Bidding Of This Procurement Project As “short-of-award.” Hence, The Notice Of Award To The Winning Bidder Shall Be Issued After Enactment By The Congress Of The General Appropriation Act (gaa) For 2025. 3. The Department Of Regional Field Office Viii Now Invites Bid For The Above Procurement Project. Completion Of Works Is Required Within One Hundred Two (102) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii: Instruction To Bidders Qty Unit Desription Estimated Total Cost Supply Of Labor And Materials For The Construction Of Binongto-an Solar Powered Irrigation System (spis) Located At Brgy. Binongto-an, Tanauan, Leyte 6,929,495.00 Scope Of Work: 60.93 Cu.m. Levelling Course 30 L.m 6" Diameter Hdpe Pipe 87 L.m 1" Diameter Galvanized Iron Pipes 56 L.m 1.5" Diameter Galvanized Iron Pipes 6 L.m 3" Diameter Galvanized Iron Pipes 1 L.s Doors And Frame 2 Cu.m. Removal Of Structure And Obstruction 1 L.s Fabricated Metal Roofing Accessories 1 L.s Prepainted Metal Sheets (corrugated) 28 Sq.m. Cement Plaster Finish 28 Sq.m. Painting Works 68 Sq.m. Masonry Works 1 L.s Structural Steel Roof Framing 1 L.s Valves And Pipe Fittings 12.86 Cu.m. Concrete Class "a" ( W/ Forms ) 7.75 Cu.m. Concrete Class "a" ( W/o Forms ) 66.4 Cu.m. Concrete Class "b" ( W/ Forms ) 52.83 Cu.m. Concrete Class "b" ( W/o Forms ) 6 L.m Rc Pipe Culvert (610 Mm Diameter) 350 Sq.m. Clearing And Grubbing 276.2 Cu.m. Structure Excavation 116.75 Cu.m. Embankment Fill (from Structure Excavation) 10391 Kgs. Reinforcing Bars 1 Lot Provision Of Concrete Project Marker 2 Each Project Billboard/signboard 1 L.s Occupational Health And Safety Program 1 Lot Mobilization & Demobilization 1 L.s Construction Of Camp And Other Temporary Facilities 1 L.s Aluminum Solar Frames 1 Assem Lightning Arrester (including Accessories And Wires) 86 L.m 3" Cyclone Wire 86 L.m 2 Strands Barbed Wire 1 Assem Trashrack 48 Pc Solar Modules (including Wiring) Specifications: Peak Power : 550 Watts, Minimum Cell Type: Monocrystalline Efficiency: At Least 21% Mechanical Performance 5400 Pa Positive Load, Minimum 2400 Pa Negative Load, Minimum Should Pass The Following International Electrotechnical Commission (iec) Or Tuv Certification Equivalent Iec 61215 (mechanical Load, Climate, And Electrical Test) Iec 61701 (salt Mist Corrosion Test) Iec 61730 (pv Module Safety) Potential Induced Degradation (pid) Resistance Manufactured In Iso 9001 Certified Factories 1 Set Pump Set (solar Pump And Inverter/controller With Wiring) Specifications: 1. Solar Pump Built In Motor Power: 18500 Watts, Minimum Tota Dynamic Head (tdh): 15 Meters, Minimum Type: Submersible Pump Discharge, Cu.m Per Day: 1200 Cu.m Per Day, Minimum With Return Valve Material: Stainless Steel Insulation Class: F Enclosure Class: Iec 34-5 Iso 5199 2. Inverter/controller Power: 22000 Watts, Minimum With Dry Run Protection Frequency: Variable Protected Against Reverse Polarity,overload, And Overtemperature Integrated Mppt (maximum Power Point Tracking) Ac/dc Compatible Enclosure Class: Ip65 Accessories: Level Switch/float Switch Discharge Meter Terms And Conditions: A During The Opening Of Bids, Bidders Shall: 1 Submit Certificate Of Project Site Inspection Issued By Farmer’s Association Or Barangay Officials Or Affidavit Of Site Inspection; 2 Submit Certificate Of Compliance To The Attached Drawings Duly Signed By The Bidder’s Authorized Representative And Signed And Sealed By A Licensed Agricultural Engineer/ Agricultural And Biosystems Engineer; B All Participating Bidder Must Comply With Section B Of Dpwh D.o. No. 197 Series Of 2016, Particularly In The Computation Ocm & Profit Of The Bid Amount. Use 12% For Vat Mark-up C During Post-qualification Evaluation 1 In Case Of Recomputed Bid, Bidder Shall Submit Its Revised Cost Estimates 2 Submit Pert/cpm And S-curve 3 Construction Methods 4 Manpower Schedule 5 Major Equipment Schedule 6 Provide Contractor's All Risk Insurance (cari) 7 Submit Plans, Design, And Specification Signed And Sealed By A Licensed Agricultural Engineer/ Agricultural And Biosystems Engineer; D Winning Bidder Shall: 1 Commence Construction Works Within Seven (7) Days Upon Receipt Of Notice To Proceed (ntp); 2 Complete The Construction Within 102 Calendar Days; 3 Provide Necessary Tools For The Satisfactory Completion Of The Project; 4 Assume Full Responsibility From The Time Project Construction Commences Up To The Final Acceptance By Darfo 8 And Shall Be Held Responsible For Any Damage In Part Or In Whole Except Those Occasioned By Force Majeure; 5 Assign A Project Engineer (either Licensed Agricultural Engineer Or Civil Engineer) That Will Oversee The Daily Construction Activities On Site; 6 Comply With The Quality Control Program (qcp) Schedule Of Minimum Testing Requirements Of The End-user; 7 Submit Material Test Report Or Its Equivalent Standard Certificate For Aggregate (sand & Gravel), And Cement 8 Submit Material Test Result From Accredited Testing Laboratory For Concrete, And Reinforcing Bar With Geotagged Photos 9 Attend Pre-construction Meeting. 10 In Case Of Time Extension Due To Unworkable Weather Condition, Submit The Request With Pag-asa Weather Report And On-site Weather Chart Within The Succeeding Month. 11 Secure And Facilitate The Necessary Permits Required For The Project Implementation. 12 Strictly Observe Construction Safety Rules And Health Program Approved By Department Of Labor And Employment (dole) During Project Implementation. E Any Delay In The Project Completion Shall Be Subjected To Liquidated Damages Equivalent To At Least 1/10 Of 1% Of The Cost Of The Unperformed Portion Of The Works For Everyday Of Delay F Be Paid Through Partial Billing Based On Validated/verified Statement Of Work Accomplishment (swa) With Geo-tagged Photos On Major Works (before, During, And After) And Inspection Report By The Da-rfo8 Inspectorate Team. 1 At Least 30% Of The Physical Accomplishment; 2 At Least 50% Of The Physical Accomplishment; 3 At Least 75% Of The Physical Accomplishment, And; 4 100% Of The Physical Accomplishment, Testing And Acceptance Of The Project G Advance Payment (maximum Of 15%) Will Be Granted Upon Submission Of The Following Requirements: 1 Advance Payment Bond By The Bidder 2 On-site Evaluation Report By The Da Project Engineer H Winning Bidder Shall Submit A Snapshot Of A Business Bank Account (preferably Landbank) To Effect Payment. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 5. Interested Bidders May Obtain Further Information From Department Of Agriculture – Regional Field Office 8 And Inspect The Bidding Documents At The Address Given Below During Office Hours, From 8:00 Am To 5:00 Pm 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 09 To December 3, 2024 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents Amounting To Ten Thousand Pesos Only (p10,000.00), Pursuant To The Latest Guidelines Issued By The Gppb. 7. The Department Of Agriculture-rfo 8 Will Hold A Pre-bid Conference On November 19, 2024, 9:00 Am At Bac Office, Da-rfo8, Kanhuraw Hill, Tacloban City Through Face To Face Or Videoconferencing/webcasting Via Google Meet, Which Shall Be Open To Prospective Bidders. 8. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before December 03, 2024, 9:00 Am (bac-secretariat Time). Late Bids Shall Not Be Accepted. 9. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 10. Bid Opening Shall Be On December 03, 2024, 9:00 Am (bac-secretariat Time) At Da8 Bac Office, 4th Floor Green Bldg., Kanhuraw Hill, Tacloban City Through Face To Face Or Videoconferencing/webcasting Via Google Meet. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 11. The Department Of Agriculture-rfo 8 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Da Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 13. For Further Information, Please Refer To: Martins A. Alde Head, Bac-secretariat Department Of Agriculture, Regional Field Office-8 Kanhuraw Hill, Tacloban City Darfo8.bacsec@gmail.com Landline No. (53)832-0834 Mobile No. 09061694318 Easternvisayas.da.gov.ph 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph Or Easternvisayas.da.gov.ph Approved By: (sgd.) Larry U. Sultan Chairman, Bids And Awards Committee

Details: Description General Requirements -installation Of Project Billboard. -occupational Safety And Health Program. -mobilization And Demobilization. Demolition/ Removal Works -demolition Of Existing Cr Wall In Birthing Room -lnclosure Of Existing Door At Birthing Room Cr -removal Of Existing Sink In Birthing Room -removal Of Existing Windows In Birthing Room -demolition Of Wall In Birthing Room For Door Installation -demolition Of Wall In Ward Room For Door Installation -removal Of Existing Windows In Ward Room -demolition Of Exisiting Pwd Cr Structure Excavation -column Footing -wall Footing Carpentry Works -800 X 2100mm Fabricated Double Swing Door With Glass Panel And 50mm X 150mm Door Jamb And Complete Accessories. -800 X 2100mm Flush Type Solid Core Door With Door Jamb And Complete Accessories. -600mm X 2100mm Pvc Door With Louver With Door Jamb And Complete Accessories. -700 X 2100mm Flush Type Solid Core Door With Door With Door Jamb And Complete Accessories . -1400 X 2100mm Fabricated Double Swing Door With Glass Panel Kick Plates. -700 X 2100mm Sliding Wooden Door. -600mm X 600mm Awning Type Window With Analok Frame. -2-panels 1200mm X 1550mm Sliding Window (analok Frame W/ 6mm Bronze Glass). -0.8m X 1.7m Fabricated Janitor's Cabinet. Plumbing Works -waste Pipe -soil Pipe -water Pipe -placenta Pit -installation Of Lavatory -installation Of Sink And Faucets -installation Of Water Closets -installation Of Sink With Stand -installation Of Handheld Bidets -installation Of Grab Bars Gravel Bedding -column Footing -wall Footing -slab Steel Reinforcement -placenta Pit - Pwd Cr -mop Sink - Column -storage Room - Column Footing -ward Room Cr - Wall Footing - Door Entrance - Slab Steel Works -fabrication And Installation Of Steel Girt. -installation Of Channel Rafter. -installation Of C-purlins. -installation Of Steel Corbel. Masonry Works -placenta Pit -mop Sink -storage Room -ward Room Cr -door Entrance -ward Room -pwd Cr -waiting Area Roofing Works -installation Of Pwd Cr Roof. -installation Of Waiting Area Roof. -sealing Of Leaks On Health Center Roof Painting Works -steel Girt -channel Rafter -c- Purlins -steel Corbel Concrete Work, Formwork & Scaffolding -placenta Pit -mop Sink -pwd Cr Floor Drywall Partition -pwd Comfort Room Drywall Partition -installation Of Dry Wall Partition 1 As Shown In The Plan. -installation Of Dry Wall Partition 2 As Shown In The Plan. -installation Of Dry Wall Partition 3 As Shown In The Plan. -installation Of Dry Wall Partition 4 As Shown In The Plan. -installation Of Dry Wall Partition 5 As Shown In The Plan. Tile Works -installation Of 600mm X 600mm Unglazed Pwd Cr Floor Tiles. -installation Of 600mm X 600mm Glazed Pwd Cr Wall Tiles. -installation Of 600mm X 600mm Glazed Waiting Area Floor Tiles. Electrical Works -installation Of Additional Lightings , Switches ,convenience Outlet. -relocate Affected Switches And Convenience Outlet. -installation Ofaircon Outlets,wirings And Circuit Breaker. -replacement Of Existing Electrical Panelboard To A 12 Branches Electrical Panelboard. -replacement Of Existing Service Entrance Conductor To A 30.0mm2 Thhn Stranded Copper Wire. -install Secondary Rack With 2 Spool. -install Service Entrance Cap 25mm Diameter. I. Project Billboard (q = 2.00 Each) Includes 4' X 8' Tarpaulin, 8' X 8' Tarpaulin, 2"x3"x 14" Coco Lumber, 2"x3"x10" Coco Lumber, 2"x2"x8" Coco Lumber, Assorted Sizes C.w. Nails. Ii. Occupational Safety And Health Program (q = 1.00 L.s) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe. Iii. Mobilization / Demobilization (q = 1.00 Lot) Iv.demolition/ Removal Works (q = 62.33 Sq.m) Includes Demolition Of Existing Cr Wall In Birthing Room, Inclosure Of Existing Door At Birthing Room Cr, Removal Of Existing Sink In Birthing Room, Removal Of Existing Windows In Birthing Room, Demolition Of Wall In Birthing Room For Door Installation, Demolition Of Wall In Ward Room For Doorinstallation, Removal Of Existing Windows In Ward Room, Demolition Of Wall In Supply & Strorage Office, Demolition Of Exisiting Pwd Cr. V.structure Excavation (q = 13.98 Cu.m.) Vi.gravel Bedding (q = 1.00 Sq.m) Includes Gravel Bedding(w/ 5% Shrinkage Factor) Vi . Steel Reinforcement (q = 594.35 Kg.) Includes 12mm Dia. Dsb X 6m, 10mm Dia. Dsb X 6m, No. 16 G.i. Tie Wire. Viii. Masonry Works (q = 68.24 Sq.m.) Includes 100mm Thk. Chb (350psi), Portland Cement, Washed Sand. Ix. Concrete Work, Formwork & Scaffolding (q = 2.34 Cu.m.) Includes Portland Cement, Washed Sand, Washed Gravel, 1/4" X 4' X 8' Thk. Marine Plywood, 2" X 2" X 10' Coco Lumber, 2" X 3" X 10' Coco Lumber, Assorted Sizes C.w. Nails X. Ceiling Works (q = 3.61 Sq.m.) Includes 4.5mm 4' X 8' Thk Fiber Cement Board, Metal Furring Double, 19mm X 50mm X 0.5mm Thk., 25mm X 25mm Wall Angle 3m, W-clip, Blind Rivets (1000pcs/box),1-1/2" Concrete Nails . Xi. Drywall Partition (q = 47.00 Sq.m.) Includes 4.5mm 4' X 8' Thk Fiber Cement Board, 0.5mm Thk. 2" X 3" X 3m Metal Studs, 0.5mm Thk. 2" X 3" X 3m Metal Track, 1 1/2" Metal Screw (900pcs/pck), Blind Rivets (1000pcs/box). Xii. Carpentry Works A. Janitor's Cabinet (q = 5.76 Bd.ft.) Includes 3/4" Thk. 1.2m X 2.4m Marine Plywood, 4" Stainless Steel T-bar Pull Handle, Concealed Full Overlay Hinges, 1" Finishing Nails, Wood Glue. B. Doors And Windows (q = 19.00 Set) Includes 1500 X 2100mm Fabricated Double Swing Door With Glass Panel And 50mm X 100mm Door Jamb And Complete Accessories; 800 X 2100mm Flush Type Solid Core Door With Door Jamb And Complete Accessories; 900mm X 2100mm Pvc Door With Louver With Door Jamb And Complete Accessories; 700 X 2100mm Flush Type Solid Core Door With Door With Door Jamb And Complete Accessories; 1400 X 2100mm Fabricated Double Swing Door With Glass Panel Kick Plates; 700 X 2100mm Sliding Wooden Door; 600mm X 600mm Awning Type Window With Analok Frame; 500mm X 1150mm Fix Glass Window (analok Frame W/ 6mm Bronze Glass); 2-panels 1200mm X 1550mm Sliding Window (analok Frame W/ 6mm Bronze Glass). Xiii. Plumbing Works (q = 1.00 Lot) Includes Water Closet + Lavatory, Standard Size W/complete Fittings & Accessories; Lavatory, 350mm-heavy Duty/american Standard; Sink With Stand (1000 X 500 X 800mm); Handheld Bidet With Complete Accessories; Faucet; Grab Bar Vertical Wall Support 32mm Dia. Ss304; Grab Bar 32mm Dia. X 800mm Ss304; Grab Bar 32mm Dia. X 600mm Ss304; Stainless Steel Two-way Angle Valve 1/2"x 1/2"; Stainless Steel One-way Angle Valve 1/2"x1/2"; 1/2"dia. G.i. Pipe; 1/2" X 1/2" X 36" Stainless Steel Flexible Water Hose; 1/2"dia. Pvc Coupling; 1/2"dia. Pvc Elbow; 1/2"dia. Pvc Tee; 1/2"dia. X 6" G.i. Nipple; 2"dia. X 3m Sanitary Pvc Pipe S-1000; 2"dia. P-trap With Plug And Sealing Ring; 2"dia. Pvc Wye; 2"dia. Pvc Clean Out W/ Plug And Sealing Ring; 2"dia. Pvc Elbow; 4"dia. X 3m Sanitary Pvc Pipe S-1000; 4"dia. Pvc Wye; 4"dia. Pvc Elbow; 4"dia. Pvc Clean Out W/ Plug And Sealing Ring; 4"dia. Pvc P - Trap W/ Plug & Sealing Ring; Teflon Tape; Pvc Solvent Cement. Xiv. Steel Works ( Q = 271.92 Kg.) Includes 25mm X 25mm X 4mm Thk. Angle Bar, 38mm X 38mm X 4mm Thk. Angle Bar, 50mm X 50mm X 4mm Thk. Angle Bar, 50mm X 75mm X 1.2mm Thk. C - Purlins,50mm X 100mm X 1.2mm Thk. C- Purlin, 10mmdia. Deformed Steel Bar, 12mm Dia. Deformed Steel Bar, 16mm Dia. Heavy Duty Grip Anchor Expansion Bolt, 16mm Dia. Full Threaded Rod, 16mm Dia. Hexagonal Flange Nut, Welding Rod (6011), 4" Grinding Disc, 4" Cutting Disc. Xv. Painting Works ( Q = 72.46 Sq.m.) Includes Red Oxide Metal Primer, Flatwall Enamel, Quick Dry Enamel, Paint Thinner, Plasolux Glazing Putty, Skimcoat, Concrete Primer, Masonry Putty, Gloss Latex, Acrytex Cast, Acrytex Reducer, 2" Paint Brush, 4" Paint Brush, 4" Paint Roller, 4" Paint Roller Foam,paint Tub, Assorted Sand Paper. Xvi. Roofing Works ( Q = 5.76 Sq.m.) Includes Pre-painted Metal Roofing Sheet Ga. 26 Long Span (rib Type), 4.5mm 4' X 8' Thk Fiber Cement Board, Blind Rivets (1000pcs/pck), Vulcaseal Sealant 1liter. Xvii. Tile Works ( Q = 11.04 Sq.m.) Includes 600 X 600 Mm Unglazed Tile, 600 X 600 Mm Glazed Tile, Portland Cement, Washed Sand, Tile Grout, 2kg/bag, Tile Adhesive, Heavy Duty (25 Kg), Tile Trim (2.5m) Steel. Xviii. Electrical Works (q = 1.00 Lot) Includes Electric Wire ,3.5mm2 Thhn Stranded Copper Wire; Electric Wire ,5.5mm2 Thhn Stranded Copper Wire; Electric Wire ,8.0mm2 Thhn Stranded Copper Wire; Electric Wire, 30.0mm 2 Thhn Stranded Copper Wire; Electrical Pvc 15mm; Junction Box 4x4";utility Box 2x4"; Single Gang Switch With Led Indicator 230vac; Two Gang Switch With Led Indicator 230vac; Ts Led Tube Batten Type Daylight 9w; Ceiling Socket 4 1/2 230v; Led Bulb 9w ,230v; 2 Gang Convenience Outlet; 15at Circuit Breaker 2 Pole, Plug In Type, 230v; 20at Circuit Breaker 2 Pole , Plug In Type ,230v; 30at Circuit Breaker 2 Pole , Plug In Type ,230v; Electrical Panelboard 12 Branches Plug In Type, 230v 2pole; 100 At Circuit Breaker , 2 Pole ,plug In Type, 230v; Service Entrance Cap 25mm Dia.; Secondary Rack 2 Spool Heavy Duty; Electrical Tape; Solvent Cement 100cc; Grounding Rod 5/8" X4.75 Ft. With Clamp.

Details: Description Invitation To Bid For The Procurement Of Various Technical & Scientific Equipment 1. The Department Of Agriculture-regional Field Office 7, Will Conduct A Public Bidding Through Early Procurement Activities (epa) Of National Expenditure Plan (nep) For Fiscal Year 2025 (gaa 2025) And Intends To Apply The Sum Of Eight Hundred Thousand Pesos (₱800,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of Various Technical & Scientific Equipment. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture – Rfo 7 Is Conducting This Procurement Through The Early Procurement Activity (epa) For National Expenditure Plan (nep) For Fiscal Year 2025 (gaa 2025) To Ensure The Timely Delivery Of Goods, Implementation Of Infrastructure Projects And Rendition Of Consultancy Services Where The Procuring Entity (pe) Is Encouraged To Start Procurement Activity Short Of Award. 3. Epa Shall Refer To The Conduct Of Procurement Activities, From Posting Of The Procurement Opportunity, If Required, Until Recommendation Of The Bids And Awards Committee (bac) To The Hope As To The Award Of The Contract, For Goods To Be Delivered, Infrastructure Projects To Be Implemented And Consulting Services To Be Rendered In The Following Fiscal Year (i.e., Fy 2021), Pending Approval Of Their Respective Funding Sources. The Bidders, Therefore, Are Herewith Informed Of The Following: A. Interested Bidders Are Invited/requested To Submit Their Bid Proposals Based On Indicative Budget (i.e. Subject To Final Approval) Through This Invitation To Bid, Together With The Bidding Documents; B. The Pe Will Evaluate The Bid Proposals And Determine The Winning Bidder. The Financial Bid Proposal Of The Winning Bidder Will Be Contract Price/amount Which Is Considered Fixed Price. However, The Notice Of Award (noa) Will Only Be Issued Upon The Approval Of The Budget (i.e., Short Of Award); And C. Would There Be A Delay In The Award As Affected By The Possible Delay In The Budget Approval, The Bid Validity As Specified In The Bidding Documents (which Is A Maximum Of 120 Calendar Days), The Winning Bidder May Be Requested To Extend The Bid Validity Accordingly (that Is, Changing The Expiration Of The Original Bid Security). In Case Of The Bidder’s Refusal To Extend The Bid Validity, The Bid Submitted By Said Bidder Will Be Rejected. 4. The Department Of Agriculture-regional Field Office 7 Now Invites Bids For The Procurement Of Various Technical & Scientific Equipment With The Following Details/specifications: 1) 1 Unit Laboratory Oven Dual Door @ 500,000.00 (forced Air Convection, At Least 749l Capacity) (please See Section Vii – Technical Specifications At Pages 31-32 Of Pbds For The Detailed Specifications) 2) 1 Unit Aluminum Pressure Cooker @ 70,000.00 • Heavy Duty • Non-electric • Capacity: At Least 41.5 Quarts (39.27 Liters) • Cast Aluminum Construction Throughout • Phenolic/stay-cool Bakelite Top Handle • Geared Steam Gauge • 2 Automatic Venting Features (the Safety Control Valve & Overpressure Plug) • Pressure Regulator Weight With Settings Of 5, 10 And 15 Psi • Double Thickness Edges For Additional Protection On Points Of Heaviest Wear • Smooth, Easy To Clean Satin Finish 3) 1 Unit Compound Microscope With Built-in Camera And Laptop @ 230,000.00 (please See Section Vii – Technical Specifications At Pages 31-32 Of Pbds For The Detailed Specifications) Delivery Of The Goods Is Required Within 90 Calendar Days From The Receipt Of Approved Notice To Proceed (ntp). Bidders Should Have Completed, Within Five Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 5. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non- Discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 6. Prospective Bidders May Obtain Further Information From Department Of Agriculture- Regional Field Office 7- Bac 2 Secretariat Through The Contact Details Given Below And Inspect The Bidding Documents As Posted On The Philippine Government Electronic Procurement System (philgeps). 7. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 21, 2024 From The Given Address Below And Upon Payment Of Non-refundable Bid Document Fee The Amount Of One Thousand Pesos (₱1,000.00) (based On Appendix 8 - Guidelines On The Sale Of Bidding Documents Of The 2016 Revised Irr Of 9184 Updated As Of January 31, 2023. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Which Will Be Presented In Person, By Facsimile, Or Through Electronic Means. 8. The Department Of Agriculture-regional Field Office 7, Will Hold A Pre-bid Conference On November 29, 2024 -2:00 P.m. At Da Conference Room, Da Complex, Highway Maguikay, Mandaue City, Which Shall Be Open To Prospective Bidders. Electronic Pre-bidding May Not Available For This Procurement Opportunity. 9. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before December 11, 2024 - 10:00 A.m. Late Bids Shall Not Be Accepted. 10. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 11. Bid Opening Shall Be On December 11, 2024 - 10:00 A.m. At Da-rfo 7 Conference Room, Da Complex, Highway Maguikay, Mandaue City. Bids Will Be Opened In The Presence Of The Bidders Or Bidder’s Authorized Representatives Who Choose To Attend The Activity. Electronic Bidding May Not Available For This Procurement Opportunity. 12. The Department Of Agriculture Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 13. The Department Of Agriculture Regional Field Office 7 (da-rfo 7) Reserves The Right To Reject Any And All Bids, Annul The Bidding Process, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 14. For Further Information, Please Refer To: Bac 2 / Procurement Section Department Of Agriculture Regional Field Office-7 Telefax No. 032-2682698 Or 032-345-3483 November 21, 2024 (sgd.) Rtd Wilberto O. Castillo, Ph.d. Bac Chairperson