Valve Tenders

Details: Description Supply And Delivery Of 4 Units Four-wheel Drive Tractor Abc: P16,400,000.00 A. Prime Mover - Rated Power: 67.14 Kw Hp, Minimum - No Of Cylinder: 4 Cylinder - Stroke And Cycle: 4 Stroke Cycle - Cooling System: Water-cooled - Fuel Injection System: Direct Injection - Fuel Ignition/fuel: Diesel B. Performance/classification - Hitch Category: Category 2&3 - Hydraulic Lift: 15 Kn, Minimum - Pto Power: 85% Of The Engine's Maximum Power, Minimum - Specific Fuel Consumption @ Max. Pto Power: 280g/kw-hr, Maximum -aspiration Method: Turbocharged -steering System: Hydraulic Power/full Hydrostatic -transmission System: 8f/2r, With Differential Lock -brake System: Hydraulic/mechanical -no. Of Drive: 4 Wheel Drive -noise Level: 90db (a), Maximum C. Accessories - With Roll Over Protective Structure (rops), Seatbelt, Canopy, Three-point Linkage: Category 1, Pto Casing/cover -with Set Of Heavy Duty Tools: A. One (1) Set Of Open Wrench (size:6-32mm, Minimum) B. (for Items B, Which Ever Is Compatible To The Offered Units) One (1) Set Allen Type Wrench (for Star And Hexagon) / One (1) Piece Each Or Combination Of Philips And Flat Screw Driver C. One (1) Pair Of Mechanical Pliers D. One (1) Piece Adjustable Wrench (size:12, Minimum) E. One (1) Piece Grease Gun (100cc, Minimum) F. One (1) Piece Tire Wrench (compatible To The Offered Units, At Least 2 Different Sizes) G. One (1) Piece Hydraulic Jack" -with Heavy-duty Toolbox That Can Accommodate All Of The Abovementioned Items Except Hydraulic Jack And Tire Wrench. -with Original Equipment Manufacturer (oem) Manual -with Slow Moving Emblem At The Back Of The Tractor -with Early Warning Device -hydraulic Control Valve: Auxillary Or Integral D. Implement Disc Plow: -width Of Cut:1,100mm, Minimum -no. Of Disc/blade: 4 -average Depth Of Tillage: 190 Mm, Minimum -actual Field Capacity: 0.4 Ha/hr, Minimum -diameter: 26 Inches -field Efficiency: 85%, Minimum -fuel Consumption: 11l/hr, Maximum Harrow: -average Width Of Tillage: 1700 Mm, Minimum -no. Of Disc/blade: 20, Minimum -actual Field Capacity: 1 Ha/hr, Minimum -diameter Of Blade: 24 Inches, Minimum -field Efficiency: 90%, Minimum Trailer: -capacity: 5 Tons, Minimum -tire: 7.5x16, 8pr, Pneumatic, Must Be Manufactured Not Earlier Than Year 2024 -dimension: 10 Ft X 6ft X 2ft (lxwxh) -rim: Ring-lock Type -tow Bar Is Parallel To The Ground When Attach To Tractor Hitch With Tailgate -with Leaf Spring Suspension Corn Seeder With Fertilizer Applicator -effective Field Capacity: 0.75ha/hr, Minimum -seeding Rate: 20 Kg/ha, Minimum -mechanism: Pneumatic -no. Of Rows: 4 Rows, Minimum -with Adjustable Hill/row Spacing And Depth Hill Spacing At Least 15-30 Cm Row Spacing :70+- 10 Cm -missing Hills: 8%, Maximum -with Replaceable Seed Plates: 2 Sets, Minimum E. Warranty: -1 Year Warranty On Parts And Services And Two (2) Years On The Engine F. Other Requirements: -with Da Logo (all Weather Type Sticker (vinyl Sticker), 10 Inches In Diameter) -with Amtec Test Result For Tractor Alone -with Amtec Test Result For Disc Plow Coupled With Tractor -with Amtec Test Result For Disc Harrow Coupled With Tractor - With Amtec Test Result For Corn Seeder With Fertilizer Applicator Coupled With Tractor -with Certificate Of Conformity For Tractor -with Namdac Certificate -with Pto Certificate By Bafe -materials And Other Components Shall Be All Brand New -shall Provide Diesel Fuel (at Least Half Of Tank Capacity) And Engine Oil In Every Units -specification Should Be Signed And Sealed By An Abe With Valid Prc Id And Ptr -bidder Should Have Service Center (owned And Managed) Within Region12 -the Technicians Of The Mfaddies And Or Its Accredited Service Center Must Have A Tesda National Certificate Ii(ncii) Relevant To The Job Or An In House Training. -no Reported Major Breakdown For Products Under Warranty In The Last 72 Hours Upon Receipt Of Complaint/s -control Instructions And Label Of The Machine & Engine Should Be In English -must Conduct Training In Operations And Maintenance On Recipient/s D. Warranty -one (1) Year For Machine And Two (2) Years For The Engine Delivery Period: 45 Calendar Days Delivery Sites: Da Tupi Res, Tupi, South Cotabato Note: All Units Shall Be Inspected @ Da-tupi Res, Including The Conduct Of Acceptance Testing & Operations And Maintenance Training To The Recipient. Units Must Be Delivered To The Recipients (see Annex A) After The Conduct Of Operation And Maintenance Training. Cost Of Bidding Documents: P25,000.00 1. During Buying Of Bidding Document: Must Submit Letter Of Intent (loi) And Present The Following Eligibility Document: A. Certificate Of Registration From Philgeps (platinum Membership) B. Registration Certificate From Sec/dti/cda C. Mayor/business Permit D. Tax Clearance 2. In Case Of Representative: Must Submit A Copy Of Board Resolution Or Secretary’s Certificate/special Power Of Attorney Whichever Is Applicable Coupled With Specimen Signa Ture.

Details: Description Supply And Delivery Of 4 Units Four-wheel Drive Tractor Abc: P1,000,000.00 A. Prime Mover - Rated Power: 67.14 Kw Hp, Minimum - No Of Cylinder: 4 Cylinder - Stroke And Cycle: 4 Stroke Cycle - Cooling System: Water-cooled - Fuel Injection System: Direct Injection - Fuel Ignition/fuel: Diesel B. Performance/classification - Hitch Category: Category 2&3 - Hydraulic Lift: 15 Kn, Minimum - Pto Power: 85% Of The Engine's Maximum Power, Minimum - Specific Fuel Consumption @ Max. Pto Power: 280g/kw-hr, Maximum -aspiration Method: Turbocharged -steering System: Hydraulic Power/full Hydrostatic -transmission System: 8f/2r, With Differential Lock -brake System: Hydraulic/mechanical -no. Of Drive: 4 Wheel Drive -noise Level: 90db (a), Maximum C. Accessories - With Roll Over Protective Structure (rops), Seatbelt, Canopy, Three-point Linkage: Category 1, Pto Casing/cover -with Set Of Heavy Duty Tools: A. One (1) Set Of Open Wrench (size:6-32mm, Minimum) B. (for Items B, Which Ever Is Compatible To The Offered Units) One (1) Set Allen Type Wrench (for Star And Hexagon) / One (1) Piece Each Or Combination Of Philips And Flat Screw Driver C. One (1) Pair Of Mechanical Pliers D. One (1) Piece Adjustable Wrench (size:12, Minimum) E. One (1) Piece Grease Gun (100cc, Minimum) F. One (1) Piece Tire Wrench (compatible To The Offered Units, At Least 2 Different Sizes) G. One (1) Piece Hydraulic Jack" -with Heavy-duty Toolbox That Can Accommodate All Of The Abovementioned Items Except Hydraulic Jack And Tire Wrench. -with Original Equipment Manufacturer (oem) Manual -with Slow Moving Emblem At The Back Of The Tractor -with Early Warning Device -hydraulic Control Valve: Auxillary Or Integral D. Implement Disc Plow: -width Of Cut:1,100mm, Minimum -no. Of Disc/blade: 4 -average Depth Of Tillage: 190 Mm, Minimum -actual Field Capacity: 0.4 Ha/hr, Minimum -diameter: 26 Inches -field Efficiency: 85%, Minimum -fuel Consumption: 11l/hr, Maximum Harrow: -average Width Of Tillage: 1700 Mm, Minimum -no. Of Disc/blade: 20, Minimum -actual Field Capacity: 1 Ha/hr, Minimum -diameter Of Blade: 24 Inches, Minimum -field Efficiency: 90%, Minimum Trailer: -capacity: 5 Tons, Minimum -tire: 7.5x16, 8pr, Pneumatic, Must Be Manufactured Not Earlier Than Year 2024 -dimension: 10 Ft X 6ft X 2ft (lxwxh) -rim: Ring-lock Type -tow Bar Is Parallel To The Ground When Attach To Tractor Hitch With Tailgate -with Leaf Spring Suspension Corn Seeder With Fertilizer Applicator -effective Field Capacity: 0.75ha/hr, Minimum -seeding Rate: 20 Kg/ha, Minimum -mechanism: Pneumatic -no. Of Rows: 4 Rows, Minimum -with Adjustable Hill/row Spacing And Depth Hill Spacing At Least 15-30 Cm Row Spacing :70+- 10 Cm -missing Hills: 8%, Maximum -with Replaceable Seed Plates: 2 Sets, Minimum E. Warranty: -1 Year Warranty On Parts And Services And Two (2) Years On The Engine F. Other Requirements: -with Da Logo (all Weather Type Sticker (vinyl Sticker), 10 Inches In Diameter) -with Amtec Test Result For Tractor Alone -with Amtec Test Result For Disc Plow Coupled With Tractor -with Amtec Test Result For Disc Harrow Coupled With Tractor - With Amtec Test Result For Corn Seeder With Fertilizer Applicator Coupled With Tractor -with Certificate Of Conformity For Tractor -with Namdac Certificate -with Pto Certificate By Bafe -materials And Other Components Shall Be All Brand New -shall Provide Diesel Fuel (at Least Half Of Tank Capacity) And Engine Oil In Every Units -specification Should Be Signed And Sealed By An Abe With Valid Prc Id And Ptr -bidder Should Have Service Center (owned And Managed) Within Region12 -the Technicians Of The Mfaddies And Or Its Accredited Service Center Must Have A Tesda National Certificate Ii(ncii) Relevant To The Job Or An In House Training. -no Reported Major Breakdown For Products Under Warranty In The Last 72 Hours Upon Receipt Of Complaint/s -control Instructions And Label Of The Machine & Engine Should Be In English -must Conduct Training In Operations And Maintenance On Recipient/s D. Warranty -one (1) Year For Machine And Two (2) Years For The Engine Delivery Period: 45 Calendar Days Delivery Sites: Da Tupi Res, Tupi, South Cotabato Note: All Units Shall Be Inspected @ Da-tupi Res, Including The Conduct Of Acceptance Testing & Operations And Maintenance Training To The Recipient. Units Must Be Delivered To The Recipients (see Annex A) After The Conduct Of Operation And Maintenance Training. Cost Of Bidding Documents: P25,000.00 1. During Buying Of Bidding Document: Must Submit Letter Of Intent (loi) And Present The Following Eligibility Document: A. Certificate Of Registration From Philgeps (platinum Membership) B. Registration Certificate From Sec/dti/cda C. Mayor/business Permit D. Tax Clearance 2. In Case Of Representative: Must Submit A Copy Of Board Resolution Or Secretary’s Certificate/special Power Of Attorney Whichever Is Applicable Coupled With Specimen Signature.

Details: Description Abc Bidder Lot/item No. Qty. Uom Item Description Unit Price Total Unit Price Total (php) (php) (php) (php) 7 Unit Pvc Reducer Coupling 75mm (63f)*63f Glue 175.93 1,231.51 25 Len Pvc Pipe 75 Glued 6 3206.07 80,151.75 4 Unit Pvc 90 Deg Elbow 75mm Glue 657.64 2,630.56 5 Unit Pvc Tee 75 Glue 90 Deg 701.81 3,509.05 5 Unit Pvc Reducer Coupling 63m(50f)*50f Glue 152.14 760.70 2 Unit Pvc Male Adaptor 63*75*2m Glue 254.43 508.86 4 Unit Pvc 90 Deg Elbow 63mm Glue 272.38 1,089.52 2 Unit Plastic Cap 2 128.34 256.68 47 Len Pvc Pipe 50 Glued 6 825.86 38,815.42 10 Unit Pvc 90 Deg Elbow 50mm Glue 189.72 1,897.20 10 Unit Pvc Tee 50 Glue 90 Deg 184.3 1,843.00 20 Unit Pvc Female Adaptor 50*1.1/2 Socket Glue F 203 4,060.00 20 Unit Plastic Bushing 1.1/2m*1f 53.58 1,071.60 20 Unit Pe Female Adaptor 32*1 100.8 2,016.00 9 Len Hdpe Pipe Sdr 17 32mm*60m 3600 32,400.00 7 Unit Pe Coupling 32mm 145 1,015.00 20 Unit Pe End Plug 32mm 102 2,040.00 10 Unit Pvc Male Adaptor 50*63*1.1/2 Glue 219.56 2,195.60 10 Unit Plastic Bushing 2m*1.1/2f 102.06 1,020.60 5 Unit Pvc Tee 50 Glue 90 Deg 250.55 1,252.75 5 Unit Pvc Union 50 With O-ring Glue 568.27 2,841.35 5 Unit 2" Aquanet Plus Ac Bsp Angle P.r.v 9,900.00 49,500.00 15 Unit Pvc 90 Deg Elbow 50mm Glue 199.71 2,995.65 47 Unit Pe Ball Valve With Single Union 32mm 350 16,450.00 2 Len Meridor Pipe 50mm 2,400.00 4,800.00 267 Unit Pvc Start Conn. Barb 16 W/ Seal 22 5,874.00 14 Roll Blank Dripline 16012 400m 14,650.19 205,102.66 167 Unit Pe Barb Coupling 16 Conn. 9.12 1,523.04 267 Unit Endline Double 0 16/17 5.6 1,495.20 1040 Unit Barb/barb Connector 4/6.5 1.26 1,310.40 1040 Unit Pvc Tube 4*7 1.7meter 40.88 42,515.20 1040 Unit Metal Rod 8mm 120cm Length 278.36 289,494.40 1040 Unit Adapter Fit 4*6.5 Tube/rod 4.5mm 4.73 4,919.20 1040 Unit Spn Lr Stic Stub 035l/h Head Only 64.68 67,267.20 9 Roll Wire #22 3,000.00 27,000.00 4 Roll Blank Dripline 16012 400m 14,650.19 58,600.76 5 Can Weld-on Cement 717 Low Voc Pvc Pl. P1000g 3,000.00 15,000.00 2 Can Weld-on Primer P68 Low Voc Pvc Pl. P1000g 3,000.00 6,000.00 25 Roll Narrow Teflon 80 2,000.00 1 Unit Water Pump Max. Lift 80m ; Max Suction 7m; Outlet/inlet Dia : 50mm ; Max Flow 30cbm/h 15,000.00 15,000.00 *****nothing Follow***** Total 999,454.86 Purpose:to Be Used For Payment Of Labor For The Installation Of Rubber Nursery Expansion Irrigation System In Aroman, North Cotabato. Delivery Period: 20 Calendar Dyas Delivery Site: Da-prri Experimental Station Aroman Carmen, North Cotabato Warranty: Price Validity:

Details: Description Farm Equipment To Be Delivered To Zigzag Kalayaan Mpc, Cervantes, Ilocos Sur 1 Unit Rice Harvester Specifications: Dimensions Structural Type: Normal Self-propelled Crawler Type Overall Length: 4120mm Overall Width: 1850mm Overall Height: 2,150mm Weight: 1,550kg Engine Type: Water-cooled 4-cycled 4-cylinder Vertical Diesel Engine (with Turbo Charger) Displacement Output/rotation Speed: 24.49kw (32.84hp) Fuel: Diesel Fuel Tank Capacity: 60l Battery: 12v Harvest Width: 2000-2200mm Travelling Section Crawler Center Distance: 940mm Width X Ground Contact Length: 400 X 1330mm Minimum Ground Clearance: 300mm Speed Shift System: Hydrostatic Variable Speed (hst) Number Of Speeds: Stepless Forward And Backward Reaper Section Reel Diameter X Width: 800 X 1420mm Speed Shift System: Constant Rotation Up/down Control: Hydraulic System Blade Width: 1448mm Reaping Width: 1600mm Reaping Height Range: -2 To 715 (cutting Blade Edge) Mm Thresher Section Thresher System: Axial Flow System (threshing Tooth System) Threshing Drum Threshing Tooth Type: Tooth Diameter X Width: 545 X 1520mm Rotation Speed: 630rpm Sorting System: Shaking Grain Outlet Hopper Capacity: 130l Number Of Units, Take-out System: 2/bagging Heavy Duty Trailer (must Be Compatible With The Rice Harvester) Length: 299.72cm-438cm Width: 150cm - 190.5cm Height: 50cm Weight Carrying Capacity: 2 Tons Bed Plate: Checkered Plate 2mm Flooring: 3/16in Thick With 5in Channel Bar Tire: Brand New 700 X 15 Rim X 6 Stud With Amtec Test Result With Operator's Manual And Maintenance Schedule Warranty: At Least One (1) Year On Parts And Services Upon Acceptance Of The Units By The Darpo With The Following Tools: Hydraulic Jack 5t, Pressure Gauge, Grease Gun 18", Flat Srewdriver 12", Star Screwdriver 12", Four Way Wheel Wrench 16", 17", 19" & 21" 4 Units Mini Tiller/cultivator Power: 7.5hp Diesel Engine Engine: 4 Stroke Air-cooled Direct Injection Fuel Capacity: 3.6l Borex Strike: 88 X 70mm Displacement: 406mm Speed: 3,000 To 3,600 Rpm Lubricating Capacity: 1.6l Net Weight: 45kg Cagewheel Height: 16in Width: 15in Weight: 20k Cultivator Width: 19in Length: 14in Tail Guide Height: 19in Width: 9in Single Plow Height: 17in Width: 9in Rubber Tire: 400 X 7 Brand New Accessories: 2 Pcs Rotary Shaft, Side Disc, Back Rod, Tool Kit (open Wrench 10" - 17") Warranty: At Least One (1) Year On Parts And Services Upon Acceptance Of The Units By The Darpo With Amtec Test Result Free Operator's Training 4 Units 12hp Air-cooled Diesel Engine Water Pump, 2" X 2" Intake Type: Centrifugal Pump Suction Port: 50 Discharge Port: 50 Max Suction Head: 8m Total Head: 18m Max Flow Rate: 520l/min Starting System: Recoil Starter Fuel: Diesel Fuel Tank Capacity: 2.5l Displacement: 0.211l Max Output: 3.35kw Ignition: Direct Fuel Injection Shaft Rotation: Clockwise From Flywheel Weight: 40.5kg Accessories: 2" X 2" (2" Inlet And Outlet), Engine Tool Kit (10" - 17" Open Wrench, 2 Pcs 48" V-belts, 1 Pc V Engine Pulley 5", Foot Valve 2") With Amtec Test Result Warranty: At Least One (1) Year On Parts And Services Upon Acceptance Of The Units By The Darpo 4 Units Submersible Pump 3hp For Irrigation Continues Rating Input: 3hp Suction And Discharge Diameter: 3" Submersion Depth: 5m Min. Suction Level: 50mm Net Weight: 7.5kg - 18.2kg Power Supply Cord: 10m Pump Body: Stainless Motor Body: Cast Iron, Copper Wire Motor Warranty: At Least Three (3) Months On Parts And Services Upon Acceptance Of The Units By The Darpo With Amtec Test Result Provide Operation And Maintenance Training On Site For Proper Equipment Operation, Provide A Reflectorized Dar And Bagong Pilipinas Logos Place Of Delivery: Zigzag Kalayaan Mpc, Libang, Cervantes, Ilocos Sur Delivery Period: Within 30 Days After Notice Of Award

Details: Description Item Description Abc Unit Quantity 1 Bacterial /viral Filter (bacterial Filtration Efficiency:99.999+%) 2,375,100.00 Piece 8,700.00 2 Chamber Kits (kits Includes Single Heated Circuit, Elbow, Chamber) 17,202,000.00 Kit 1,830.00 3 Humidifier (adult/neonate) 3,598,560.00 Piece 3,024.00 4 Resuscitator Bag With Mask (adult) 5,300,736.00 Kit 2,688.00 5 Resuscitator Bag With Mask (pedia) 1,017,552.00 Kit 516.00 6 Resuscitator Bag With Mask (neonate) 1,301,520.00 Kit 660.00 7 Ventilator Tubing (adult) 5,677,360.00 Set 4,240.00 8 Ventilator Tubing (pedia) 428,480.00 Set 320.00 9 Ventilator Tubing (neonate) 1,124,760.00 Set 840.00 Additional Specifications (pr# 2024-08-0933) • Chamber Kit  Must Be Compatible With The Hospital Owned Fisher & Paykel And Comen Machine • Resuscitator Bag Adult  Body Weight: >40kg  Stroke Volume: 600-800ml  Resuscitator Volume: 1500-1650ml  Dimension (lxd): 212x131mm  Resuscitator Weight: 600g  Pressure Limiting Value: 40-60cmh2o  Dead Space (patient Value): 7ml  Inspiratory Resistance: <5cmh2o (50l/min)  Expiratory Resistance: <5cmh2o (50l/min)  Bag Reservoir Volume: 2000ml  Materials: 100% Latex Free  % Latex Free • Resuscitator Bag Neonate/infant  Body Weight: <10 Kg  Stroke Volume: 240ml  Resuscitator Volume: 280ml  Dimension (lxd): 135x75mm  Resuscitator Weight: At Least 350g  Pressure Limiting Value: 30-40cmh2o  Dead Space (patient Value): 7ml  Inspiratory Resistance: <5cmh2o (50l/min)  Expiratory Resistance: <5cmh2o (50l/min)  Bag Reservoir Volume: 1600ml  Materials: 100% Latex Free • Resuscitator Bag Pedia - Body Weight: >10 Kg – 40kg - Stroke Volume: 400ml - Resuscitator Volume: 600ml - Dimension (lxd): 146x100mm - Resuscitator Weight: 410g - Pressure Limiting Value: 40cmh2o - Dead Space (patient Value): 7ml - Inspiratory Resistance: <5cmh2o (@ 50l/min) - Expiratory Resistance: <5cmh2o (@ 50l/min) - Bag Reservoir Volume: 1600ml - Materials: 100% Latex Free • Ventilator Tubing Adult - Dual Limb At Least 118cm Length, Disposable - Exhalation Valve W/ Tubing - Proximal Airway Pressure Line Tubing - Circuit Hanger - Inline Neb Kit - Extra Tubing With At Least 36 Cm For Humidifier • Ventilator Tubing Neonate - Dual Limb 60cm Length With Water Trap, Disposable - With Adapters - Proximal Line - Extra Tubing With At Least 36 Cm For Humidifier - • Ventilator Tubing Pedia - Dual Limb 108cm Length, Disposable - Water Trap 70ml Capacity - Proximal Airway Line Tubing - Circuit Hanger - Extra 36cm Tubing For Humidifier Terms Of Reference (p.r. No: 2024-08-0933) • Items No. 1 To 3 – Lot Bid • Items No. 4 To 6 – Lot Bid • Items No. 7 To 9 – Lot Bid • Mode Of Delivery: *within Twenty (20) Calendar Days Upon Receipt Of The Call-off. • The Authorized Representative Should Notify The Materials Management Section Personnel At Least One (1) Day Before The Delivery Arrives For Proper Warehousing Management. • A Copy Of Purchase Order (po) Must Be Presented During Delivery To Ascertain Which Specific Po The Item(s) Corresponds To, Especially In Cases Where Bidders Are Awarded With Multiple Contracts. • All Items To Be Delivered Must Be Securely Packaged In Crdboard Boxes, Particularly Loose Items, To Safeguard The Contents Against Damage, Maintain Sterility And Cleanliness, And Display Essential Information Such As Manufacturing Date, Expiration Date, Temperature Requirements, And Lot Number. • All Medical Supplies To Be Delivered Must Have A Minimum Expiration Period Of 2 Years From Date Of Delivery. If The Expiration Period Is Less Than 2 Years, Guarantee Letter Is Required Stating That The Supplier Shall Replace These Items Within 3 Months Prior To The Expiration Date. • For Items Lacking An Expiration Date, A Certification From The Manufacturer Should Be Provided, Indicating The Products Shelf Life Starting From The Manufacturing Date. • All Supplies To Be Delivered Must Strictly Adhere To The Specified Requirements And Brand. Any Items Found Not Conforming To Any Of The Requirements During Inspection Will Be Rejected, Unless Accompanied By A Letter Granting Prior Approval For A Change In Specification Or Brand. • A Safety Data Sheet (sds), Consisting Of 16 Sections And Updated Within 5 Years Must Be Provided During Delivery. If No Changes Have Been Made, A Certification Letter Should Accompany The Sds To Substantiate This Claim. This Requirement Applies Only To Supplies For Which A Safety Data Sheet Is Necessary. Total Abc 38,026,068.00

Details: Description Bleach Detergent Liquid, 1 Liter 30 Bottle Dishwashing Liquid, 495ml 30 Bottle Fabric Conditioner, 900ml Min 30 Bottle Glass Cleaner, 500ml 30 Bottle Hand Soap, Liquid, 500ml (safeguard) 30 Bottle All Purpose Cleaner , 450 Ml Bottle 30 Bottle Facial Tissue, 2 Or 3-ply 200 Box Jumbo Toilet Paper Roll Dispenser Single Roll Jumbo Tissue Dispenser Large Capacity Stylish Wall Mount Punch Free For Bathrooms For Toilets (1k) 15 Unit Jumbo Toilet Paper Roll 120 Roll Rubber Band, Elastics Flat, Big, 350g/box 10 Box Air Freshener, Aerosol, 300ml Min 30 Can Air Freshener, Aerosol, Disinfectant Spray, 400g Min 30 Can Furniture Polish With Cleansing Conditioner Rainshower 300ml 20 Can Multi-insect Killer Odorless - 500 Ml 30 Can Muriatic Acid, 4-liter Galon 30 Gal Battery, Dry Cell, Aa, 2 Pieces Per Blister Pack 30 Pack Detergent Powder Soap, 40g Min 200 Pack Sando Bag, White Plastic, Xxl 30 Pack Bathroom Deodorizer, 100g, Assorted 30 Pcs Coil Mat Soft Rubber Absorbent Indoor/outdoor Plain Disinfectant Cushion 30 Pcs Dishwashing Sponge 20 Pcs Extension Wire, Multiple Sockets, 10 Meters 15 Pcs Extension Wire, Multiple Sockets, 5 Meters 15 Pcs Hand Soap, Bar, 135g Min 25 Pcs Toilet Brush With 1-meter Long Handle 10 Pcs Trash Can With Cover, 10 Liter Size 20 Pcs Trash Bag - Black - L 40 Roll Trash Bag - Black - Medium 40 Roll Trash Bag - Black - Xl 40 Roll Trash Bag - Black - Xxl 40 Roll 18.00mm Paper Cutter With Spare Blade- Knife 20 Pcs Mini Soft Broom (small Walis Tambo) 10 Pcs 3-gang Exterior Wall Mount Outlet 30 Pcs Surface Type Utility Box/amco Box.w/screw&tox 30 Pcs Canned Car Airfreshener 180-grams 50 Pcs Car Interior Cleaner,250 Ml Spray Bottle 25 Pcs Car Exterior Cleaner,250 Ml Spray Bottle 25 Pcs App Reference No. _______________________ Item Description (refer To Description / Particulars In The Attached Purchase Request Form) Approved Budget Of The Contract (abc) Per Qty Quotation/offer Price Compliance Quantity (required) (refer To Pw) Remarks (brand, Availability, Etc.) Car Protectant Spray,250 Ml Spray Bottle (armor All) 25 Unit Stainless 3-way Valve 1/2 Inch Diam. Pipe 25 Pcs Kitchen Faucet (stainless Steel Standing Curved Type) 25 Set Hose For High Pressure Pump Car Washer 30 Mtr Universal Plug Adapter 30 Pcs 1-quart Canned Epoxy 10 Pair Flat Cord For Extension & Speaker Wire, #16 50 Mtr Heavy Duty Rubber Plug W/ Clamp, 15amp 125v 50 Pcs 7-watts Led Bulb 200 Pcs Padlock (65mm Wide Size) 15 Pcs 3.0mm Drill Bit (heavy Duty For Steel) 25 Pcs 3.0mm Drill Bit (heavy Duty For Concrete) 25 Pcs Rivets (3.0 Mm X 3/4inch Long) 5 Box Riveter 3 Pcs Presenter Wireless Laser Pointer Remote Controller For Mac Win 3 Unit Spray Paint (clear,preferrably Samurai Paint) 30 Can Spray Paint (white,preferrably Samurai Paint) 30 Can Spray Paint (mint Green,preferrably Samurai Paint) 30 Can Hose Fitting (water Tanker) 3inch 5 Pcs Solignum All Around Clear Paintable 1 Gallon Wood Preservatives Anti 10 Gal Toeing Rope, 5.00 Meter By 10.00 Tons 2 Length Wd-40, 250 Ml 30 Can Screw Driver Set 3 Set Double-sided Tape Installation Tape Heavy Duty 5m Roll Tape 30 Roll Car Floor Matting Set For 7-seater Vehicle 3 Set Car Floor Matting Set For Utility Van 3 Set Mouse Pad 20 Pcs Door Latch Lock ,4.0 Inch 30 Set Door Safety Hasp Lock, 5.0 Inch 30 Set Hand Truck Push Cart ,2-wheeled 3 Unit Hand Truck Push Cart,trolley ,4 Wheeled 3 Unit Alcohol,500 Ml Bottle 30 Bottle Alcohol,1-galon Bottle 30 Gal

Details: Description Phividec Industrial Authority Invitation To Bid For Procurement Of Motor Vehicles 1. The Phividec Industrial Authority, Through The Corporate Operating Budget For Cy 2024 Intends To Apply The Sum Of Three Million Four Hundred Thousand Pesos (php3,400,000.00) Being The Abc To Payments Under The Contract For Procurement Of Motor Vehicles (gsd-sep-24-824) As Follows: Item Qty Unit Unit Cost Total Motor Vehicles 1. Passenger Van • Engine Displacement Not Exceeding 2500 Cc For Gasoline Or 3000 Cc For Diesel Or Afv • Number Of Cylinders: 4 • Drivetrain: Rear Wheel Drive • Number Of Seats: At Least 10 1 Unit 1,400,000.00 1,400,000.00 2. Pick Up Truck • Engine Displacement Not Exceeding 2500 Cc For Gasoline Or 3000 Cc For Diesel Or Afv • Engine Type: 4-cylinder 16 Valve • Drive Type: 4x4 • Seating Capacity: 5 Seats 1 Unit 2,000,000 2,000,000.00 Total 3,400,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Phividec Industrial Authority Now Invites Bids For The Above Procurement Project. Delivery Of Goods Is Within 30-60 Days After Receipt Of Notice To Proceed (ntp). Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Bids And Awards Committee Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours 8:00a.m. To 5:00p.m From Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 07, 2024 To November 27, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents In The Amount Of Php5,000.00, Pursuant To The Latest Guidelines Issued By The Gppb. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. A Bidder Is Allowed To Pay The Applicable Fee Online, Using The Account Details Below: Account Name: Phividec Industrial Authority Account Number: 3532-0013-81 (current Account) Branch: Land Bank Of The Philippines – Puerto Branch, Cagayan De Oro City Note: 1. Bidder Must Present A Proof Of Payment/transaction To The Bac Secretariat. 2. Payments Are Subject To 1-3 Days Confirmation, Prior To Issuance Of Official Receipt. 6. The Phividec Industrial Authority Will Hold A Pre-bid Conference On November 15, 2024 @ 1:30 P.m. At The Phividec Industrial Authority Board Room, 2/f Administration Building, Mct Complex, Tagoloan, Misamis Oriental And/or Through Videoconferencing/webcasting Via Zoom (meeting 851 5100 0398 Passcode: 631019), Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before November 27, 2024, 8:30 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On November 27, 2024, 1:30 Pm At The Phividec-ia Board Room, 2/f Administration Building, Mct Complex, Tagoloan, Misamis Oriental And/or Via Zoom (meeting Id: 889 5192 6218, Passcode: 594612). Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Phividec Industrial Authority Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Ms. Maria Theresa G. Labo Head, Bac Secretariat Phividec Industrial Authority Mct Complex, Tagoloan, Misamis Oriental Mobile Number: 09672072925 Website: Www.piamo.gov.ph Email Address: Procurement@piamo.gov.ph 1. You May Visit The Following Websites For The Downloading Of Bidding Documents: A. Philgeps Website - Www.philgeps.gov.ph B. Phividec-ia Website Www.piamo.gov.ph November 07, 2024 Signed Mr. Edilberto E. Mugot, Jr. Bac Chairperson

Details: Description Morong Water District Zamora Extension, Poblacion, Morong, Bataan Tin # : 275-087- 677-000 Purchase Request November 4, 2024 Department: Operation And Maintenace Division Pr No. Date: Section: Repair And Maintenance Item Quantity Unit Of Issue Item Description Estimated Estimated No. Unit Cost Cost 01 200 Pcs Volumetric Water Meter 1⁄2” (sample Is Required) · Volumetric Piston Working Principal, Direct Reading · Liquid-filled Register · Material Of Meter Body: Brass Grade Cw617n · Meter Body Length Without Tailpieces: 115mm · Weight: Meter Only (approximate): 0.90kg · Meter Register Display Ð Number Of Black Wheels: 4 Counters Ð Number Of Red Wheels: 4 Counters · Guaranteed Flow Rate: Ð Maximum Flow Rate (qs ±2%): 3.125 M3/h Ð Permanent Flow Rate (qp ±2%): 2.500 M3/h Ð Minimum Flow Rate (qmin ±5%): 0.015 M3/h · Measurement Range: R160 · Meter Accuracy Class: Class 2 · Head Loss: 0.63 Bar · Maximum Admissible Working Temperature (mat): 50 Degrees Celsius · Maximum Admissible Working Pressure (map): 16 Bars · Smallest Reading Resolution: 0.0005 Cu.m. Other Features: · With Built In Bow Strainer · Amr Ready · Network Mounting: Any Position · Tamper Proof · Iso 4064-1:2014/iso 4064-4:2014 Compliant (certificate Should Be In Accordance To The Country Of Origin.) · Anti-magnetic Shield · Inclusion Of Non-return Valve And Non-reversible Equipment · With Calibration Certificate Or Certificate Of Quality · Comes W/ 2 Years Manufacturer's Warranty (manufacturer Should Indicate The Date Of Tender & Warranty Period Issued To The End-user & Address Of The Manufacturer W/ Contact Number Address To Water District.) Grand Total 430,000.00 Purpose: For Nrw Reduction Program – Change Of Water Meter Requested By: Cash Availability: Approved By: Signature: Printed Name: Jayfee C. Torres Donna Marie B. Dacula Minerva De Leon Vidad Designation: Water Sewerage Maintenance Man C Accounting Processor A General Manager Request For Quotation Date: November 20, 2024 Rfq No.: 2024- 015 Name Of Company: Morong Bataan Water District Address: Burgos St. Poblacion Morong Bataan Business Permit No.: Tin: 275-087-677-000 Philgeps Registration No.: Please Quote Your Best Offer For The Item/s Described Below, Subject To The Terms And Conditions Provided On This Page, Stating The Shortest Time Of Delivery. Bidder Or Supplier Must Submit Their Quotation Duly Signed By You Or Your Duly Representative Not Later Than November 28, 2024 1:00 Pm And Shall Enclose Their Original Eligibility And Technical Documents (see Supporting Documents) In One Sealed Envelope Marked “original – Technical Component”, And The Original Of Their Financial Or Quotation In Another Sealed Envelope Marked “original – Financial Component”, Sealing Them All In An Outer Envelope Marked “original Bid” Or “original Quotation”. Eligibility Documents: Mayor’s Permit/business Permit, Annual Income Tax Return/business Tax Return, Tax Clearance Certificate, Philgeps Certificate Of Registration Sealed Quotations May Be Submitted At The Address Indicated Below. Morong Water District Burgos St. Poblacion Morong Bataan Procurement Officer Terms And Conditions: Bidders Shall Provide Correct And Accurate Information Required In This Form. Bidders May Quote For Any Or All The Items. Warranty Must Be 12 Months (1 Year) Or More Against Factory Defects. Price Quotation/s Must Be Valid For A Period Of (30) Thirty Calendar Days From The Date Of Submission. Price Quotation/s, To Be Denominated In Philippine Peso Shall Include All Taxes, Duties And/or Levies Payable. Terms Of Payment Within Three Hundred Sixty (360) Calendar Days From Date Of Acceptance/completion. Quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. Award Of Contract Shall Be Made To The Lowest Quotation (for Goods And Infrastructure) Or, The Highest Rated Offer (for Consulting Services) Which Complies With The Minimum Technical Specifications And Other Terms And Conditions Stated Herein. All Entries Must Be Typewritten. Any Interlineations, Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By You Or Any Of Your Duly Authorized Representative/s. Morong Water District Burgos St. Poblacion Morong Bataan The Delivery Schedule For All Items/contract Duration Shall Be Within Seven (7) Calendar Days Reckoned From The Date Of Receipt Of Purchase Order (po) Or Notice To Proceed (ntp). With Three (3) Years Warranty From Manufacturer Issued Directly To Morong Bataan Water District. The Morong Bataan Water District Reserves The Right To Post Qualify Any Supplier And/or Reject Any Or All Submitted Quotations. Liquidated Damages Equivalent To One Tenth Of One Percent (0.001%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. The Mwd Shall Rescind The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. Dimance D. Capalao Bac Chairman

Details: Description Combine Harvester Dimension: Length (mm)-5350, Width(mm)-2545, Height (mm) 2800 3,300 Kg Four-stroke, Water-cooled, Turbocharger 65 Kw (2400 R/min), Diesel 60l Capacity Starting Method: Electric Start Battery: 12v Header Width (mm): 2,300 Header Type (/) Rotary Cutter Reel Type (/) Eccentric Finger Reel Diameter (mm): ɸ900 Track (/) 550 X 90 X 56 Ground Contact Pressure Of Crawler (kpa) ≤20 Track Gauge (mm) 1,250 Travel Speed L (m/s) 1.29 Travel Speed M (m/s) 1.68 Travel Speed H (m/s) 2.41 Speed Shift System (/) 38 Cc Hst Threshing System: Diameter X Length (mm) ɸ620 X 2,050 Cleaning System: Width X Length (mm) 840 X 1,700, Upper Sieve Structure (/) Two-stage Design Grain Output: Capacity In Tank (m3) 0.6; 3/bagging One (1) Year Warranty For Services And Parts Except Consumables Upon Final Acceptance. The Unit Shall Include Brochures Which Include But Not Limited To Manual, Warranty Booklet, Operations Manual For Accessories And Operations And Maintenance Manuals In English. Free First Change Oil The Vehicle Must Have 20 Liters Of Fuel In The Tank Upon Delivery The Bidder Must Provide After Sales Support To The Procuring Entity The Bidder Must Provide After Sales Warranty To The Procuring Entity Four-wheel Tractor With Implements Engine Power @speed (hp) 45@2400 4 Cylinders, Inline, Vertical, Water-cooled Engine 70 Fuel Tank Capacity (l) 12v Battery Dry Air Cleaner Gears Shuttle 8f + 8r Dual Clutch Mechanical Disc Brake Pin Type, Mechanical Differential Lock Direction Of Turning: Clockwise, Viewed From Tractor Rear Diameter Of Pto: Shaft (mm) 35 Pto Speed (rpm) 540/760 3 Point Hitch: Category Ii & I Control System: Position, Draft, Float Rear Auxiliary Remote Valves 2 Groups >=1191 >=1324 Lifting Capacity (kg) Hydraulic Power Steering Dimension (mm) Canopy: 3650*1572*2650 Ground Clearance (mm): 440 Tires (f/r): 8-18/13.6-24 R-1t, Other Size Optional Wheel Base (mm) 1845 Wheel Track (f/r) (mm): 1200-1500/1200-1500 1200-1500/1200-1500 One (1) Year Warranty For Services And Parts Except Consumables Upon Final Acceptance. Free First Change Oil The Unit Shall Include Brochures Which Include But Not Limited To Manual, Warranty Booklet, Operations Manual For Accessories And Operations And Maintenance Manuals In English. The Vehicle Must Have 20 Liters Of Fuel In The Tank Upon Delivery The Bidder Must Provide After Sales Support To The Procuring Entity The Bidder Must Provide After Sales Warranty To The Procuring Entity

Details: Description Item No. Qty. Unit Particulars Abc Qty*abc 1 125 Unit "knapsack Sprayer, 2 In 1, 1. Classification Lever And Battery Operated 2. Design And Performance - All Valves And Vale Seals Shall Be Corrosion Resistant - Flow Rate: 1.4 Lpm, Maximum -mean Operating Pressure: 100 Kpa (14.5 Jpsi), Minimum -tank Capacity: 16l - Minimum -tank Gross Weight: Maximum Of 22 Kg -with At Least Two (nozzle) Tips - Provided With 50mm Wide Adjustable Strap With Pads - Lance Length: 100cm Minimum 3. Tank: -plastic 4. With Brand Name/trademark Label 5. With 8"" Da Logo-(banner Program)-(year), All--weather Sticker 6. Shall Be Amtec Tested If Lever-operated Knapsack Sprayer 7. With Delivery And Testing " ₱2,200.00 ₱275,000.00 2 125 Pcs Steel Shovel, Pointed Tip, 102cm Length, 30cm Shovel Head Length, 30cm Shovel Head Width, 12cm Handle Width ₱300.00 ₱37,500.00 3 125 Pcs Fork Spade, Steel, 4 Prongs Steel Handle, 100 Cm Length, Finch Fork Length ₱400.00 ₱50,000.00 4 5 Pcs Bolo, Rubber Handle (5-7 Inches Length), River, 18-19 Inches Length (blade To Handle) ₱10,000.00 ₱50,000.00 5 125 Pcs Long Stem Compost Soil Thermometer, Celcius (0-100), 20 Inches Stem Length, 3 Inches Lens Diameter, Rustproof Stainless Steel Probe ₱400.00 ₱50,000.00 6 1 Unit "portable Digital Grain Moisture Meter 1. Classification Portable Digital Grain Moisture Meter, Electrical Resistance Method 2. Design And Performance - Useful For Measuring Moisture Content Of Grains - Measurement Range For Grains: 6.3% ∼35.0% - Automatic Temperature Compensation - Average Data Available -battery Replacement Sign Appears -large Digital Lcd Display For Easy Reading - 'ce' Mark Obtained - Operating Temperature: -10°c To +40°c - Resolution: 0.1% - Accuracy:±0.5% - Power Source: 1.5v X 4 Aa Batteries - Dimensions: 164mm (l) X 94mm (w) X 40mm (h) - Weight: Approx. 1.5 Kg 3. Material -durable Plastic Casing 4. With Brand Name / Trademark Label 5. With 8"" Da Logo - (banner Program) - (year), All - Weather Sticker 6. Shall Be Amtec Tested If Required For Grain Moisture Meters 7. With Delivery And Testing" ₱20,000.00 ₱20,000.00 Total Abc ₱482,500.00