Valve Tenders

Details: Description Republika Ng Pilipinas Department Of Education Region Xi Davao City Request For Quotation Date: November 27, 2024 Pr No.: 00271 Please Quote Your Lowest Price On The Item/s Listed Below, Subject To The General Conditions On The Last Page, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative Not Later Than In The Return Envelope Attached Herewith. Aris B. Juanillo Bac Vice Chairperson Qty Unit Item Description Abc Unit Cost Total 2 Units Floor Mounted Type Aircon ₱150,000.00 4 Hp, Floor Standing Inverter Full High Density Filter 20m Long Wind With 4-way Auto Swing Auto Shutter Hidden Display & Touch Control Anti Corrosion Treatment Cooling: 29,500kj/hw Or 36,400 Kj/hw Easy Monitoring And Inverter Pcb Self Diagnosis 5-year Warranty On Compressor 5-star Energy Efficiency Rating Control Method: Electronic Expansion Valves (eev) Net Dimensions (wxhxd) (mm) 610 X 1850 X 400 Mm With Free Labor/installation, Materials And Complete Wiring 5 Units Split Type Aircon ₱70,000.00 2.5hp, Digital Inverter Boost Fast Cooling Triple Protector Plus, Auto Clean R32 Refrigerant, Eco Mode 10-yeart Warranty On Compressor With Free Labor/installation, Materials And Complete Wiring Total ₱650,000.00 Rneap Purpose: Procurement Of Airconditioning Units To Be Used In Rneap Emerald Hall And Dormitories. Mode Of Procurement: Small Value Please Attach The Following Documents: 1) Mayor's/business Permit 2) Philgeps Registration Number 3) Omnibus Sworn Statement 4) Businnes/income Tax Return 5) Tax Clearance Note: * This Rfq Should Be Submitted Manually To Deped Regional Office Xi With Wet Ink/fresh Signature And Date By The Bidder "* Attach Complete Documents And Sealed In The Envelope With Written Pr Number Outside Of It Upon Submission On Or Before December 09, 2024" Pls Contact : Aida P. Placencia (082) 224-0749 Warranty : Price Validity : After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item/s At Prices Noted Above. _____________________________________ Printed Name And Signature Signature Over Printed Name Of The Canvasser Tel. No. / Cellphone No. E-mail Address Pr Date Deliberated: November 15, 2024 Date:_______________________ Rfq Date Prepared : November 27, 2024 Pu/jls

Details: Description 1 Bags Cement 135.0 315.65 42,612.75 2 Cum Sand 9.0 963.00 8,699.50 3 Sqm Gravel 5.0 1284.00 6,420.00 4 Pcs Concrete Hollow Block - 4" 939.0 20.33 19,089.87 5 Pcs 12 Mmø Def Bar (grade 60) 93.0 224.70 20,897.10 6 Pcs 10 Mmø Def Bar (grade 40) 100.0 224.70 22,470.00 7 Kg Gi Tie Wire # 16 18.6 85.60 1,592.16 8 Pcs Phenolic Board 7.0 1605.00 11,235.00 9 Kgs Assorted Nails 15.0 96.30 1444.50 10 Bd Ft Lumber For Formworks ( 2"x 3" And 2"x 2") 1101.5 37.45 41250.47 11 Pcs Metal Furring (jeamaxx G.24) 7.0 235.40 1,647.80 12 Pcs Carrying Channel (jeamaxx G.24) 19.0 235.40 4,472.60 13 Pcs Double U-clip (jeamaxx) 200.0 10.70 2,140.00 14 Pcs Wall Angle (jeamaxx G.24) 23.0 65.27 1,501.21 15 Pcs 1/4" Thick Cement Board (hardiflex) 18.0 513.60 9,244.80 16 Boxes Blind Rivets 1/8" Dia. X 1/2" (150 Pcs Per Box) 5.0 171.20 856.00 17 Pcs Drill Bits 10.0 10.70 107.00 18 Set Exterior Sliding Glass Windows (1.2 X 1.2 ) 2.0 5350.00 10,700.00 19 Set Exterior Sliding Glass Windows (1.6 X 1.2) 3.0 5885.00 17,655.00 20 Set Exterior Kitchen Sliding Glass Windows (2.2 X 0.6) 1.0 5350.00 5,350.00 21 Set Exterior T&b Awning Windows (0.6 X 0.6) 1.0 3210.00 3,210.00 22 Set Interior Sliding Window (1.2 X 0.5) 1.0 2675.00 2,675.00 23 Set Matwood Solid Panel Doors (2.1 X 0.9 ) 2.0 6420.00 12,840.00 24 Set Matwood Panel Type Doors (2.1 X 0.8)) 1.0 5885.00 5,885.00 25 Set Cr Door - Painted Flush Door (0.6 X 2.1) 1.0 3745.00 3,745.00 26 Pcs White Floor Tiles (60x60 ) 164.0 167.99 27,550.36 27 Pcs Cr Floor Tiles (30 X 30) 32.0 85.60 2,739.20 28 Bags Tile Adhesive 7.0 449.40 3,145.80 29 Bags White Cement 1.0 963.00 963.00 30 Gallons Flat Latex (boysen) 7.0 963.00 6,741.00 31 Gallons Semi Gloss Latex 2nd And Final Coating (boysen) 4.0 963.00 3,852.00 32 Bags Skim Coat 10.0 588.50 5,885.00 33 Roll Joint Connection Tape 3.0 440.84 1,322.52 34 Pcs # 7 Paint Roller 3.0 64.20 192.60 35 Pcs # 2 Paint Brush 5.0 21.40 107.00 36 Pcs Sand Paper 10.0 10.70 107.00 37 Gallons Flat Wall Enamel (boysen) 10.0 834.60 8,346.00 38 Gallons Quick Dry Enamel (boysen) 5.0 802.50 4,012.50 39 Gallons Laquer Thinner (boysen) 1.0 511.46 511.46 40 Gallons Paint Thinner (boysen) 1.0 511.46 511.46 41 Pcs 4''ø Upvc Pipe (neltex-orange) 4.0 770.40 3,081.60 42 Pcs 2''ø Upvc Pipe (neltex-orange) 4.0 321.00 1,284.00 43 Pcs 1/2''ø Upvc Pipe (neltex-blue) 8.0 85.60 684.80 44 Pcs 4''ø Upvc Clean Out (neltex) 2.0 107.00 214.00 45 Pcs 2''ø Upvc P-trap (neltex) 3.0 139.10 417.30 46 Pcs 4'' Ø Upvc Wye (neltex) 3.0 224.70 674.10 47 Pcs 4'' X 2 Ø Upvc Wye (neltex) 3.0 181.90 545.70 48 Pcs 2'' Ø Upvc Tee (neltex) 1.0 64.20 64.20 49 Pcs 1/2'' Ø Upvc Tee (neltex) 9.0 21.40 192.60 50 Pcs 4''ø Upvc Elbow 1/8 Bend (neltex) 3.0 96.30 288.90 51 Pcs 2''ø Upvc Elbow 1/8 Bend (neltex) 3.0 37.45 112.35 52 Pcs 2''ø Upvc Elbow 1/4 Bend (neltex) 7.0 128.40 898.80 53 Pcs 1/2''ø Upvc Elbow 1/4 Bend (neltex) 11.0 16.05 176.55 54 Pcs 1/2''ø Upvc Male Adapter (neltex) 4.0 16.05 64.20 55 Pcs Teflon Tape 10.0 11.77 117.70 56 Can Pvc Cement / 400cc 5.0 192.60 963.00 57 Pcs 4" Floor Drain S/s (pozzi Ys-d101) #div/0! 0.00 58 Pcs Stainless Sink ( Franke Ssx-110-45) 2.0 63.13 126.26 59 Pcs Goose Neck Faucet (kasch Lj-5001c Cold Tap Wall Kitchen Faucet 304 Ss) 2.0 2675.00 5,350.00 60 Pcs Faucet (kasch Lj-5003, Wall Faucet 304 Ss) 1.0 390.55 390.55 61 Pcs Check Valve 1.0 254.66 254.66 62 Pcs Gate Valve 3.0 201.16 603.48 63 Unit Water Closet(amstd Pck Winplus Ii Fl Premier Suite P2398-05 White) 2.0 321.00 642.00 64 Unit Lavatory (amstd/lav W/ped-newton White 1h W/ Bracket Set) - 1.0 4815.00 4,815.00 65 Pcs Stainless Bidet 1.0 3959.00 3,959.00 66 Set Tissue Holder And Hand Towel Rod 1.0 535.00 535.00 67 Mtrs 20mmø Liquidtight Flexible Metal Conduit With Fitting 1.0 267.50 267.50 68 Boxes 3.5 Mm² Thhn (phelps Dodge) 150.0 37.45 5,617.50 69 Boxes 2.0 Mm² Thhn (phelps Dodge) 0.5 6707.83 3,353.92 70 Pcs 2 Gang Convenience Outlet Universal 1.0 4060.65 4,060.65 71 Pcs 2 Gang Switch 6.0 342.40 2,054.40 72 Pcs 1x18w Philips Fs 13804 Glass Recessed White W/ 9w Ess Ledbulb E27 3.0 161.57 484.71 73 Set Panel Board 15.0 267.50 4,012.50 74 Pcs 125at/225af (mpb) 1.0 1455.20 1,455.20 75 Pcs 20at/50af 2.0 342.40 684.80 76 Pcs Electrical Tape 1.0 342.40 342.40 77 Pcs Utility Box 10.0 27.82 278.20 78 Pcs Junction Box 9.0 37.45 337.05 79 Lms Hi Rib Metal Roof (1220mm Width,0.5mm Thck) 4.0 42.80 171.20 80 Pcs C-purlins 6m Legnth (2" X 3") 105.0 577.80 60,669.00 81 Pcs Ga 22 Gutter 4' Length 24.0 335.98 8,063.52 82 18mm Hardiflex Senepa 17.0 374.50 6,366.50 83 Pcs 2" X 4" X 1.2mm Thck Tubular Rafter 24.0 955.51 22,932.24 84 Pcs Ga 22 Pre Painted Flashing And Gutter 4' Length 30.0 955.51 28,665.30 Grand Total 500,000.00

Details: Description 80 Alcohol 70 % Solution Bottle 1 Alcohol , Ethyl Gallon 4 Asepto Syringe 4 Autoclave Indicator X Roll 4 Activated Glutaraldehyde Solution 4 Alcohol 70% / Gallon 4 Arm Sling, Adult X Piece 4 Arm Sling, Pedia X Piece 2 Adhesiive Tape, Surgical Plaster 3mmx 1mmx Roll 3 Bp Aneroid 100 Blood Transfusion Set 4 Bleaching Solution X Gallon 20 Hand Soap, Fresh Melon 2 Bp Cloth Cuff, Adult 2 Bp Cloth Cuff, Pedia 2 Bp Rubber Cuff, Adult 2 Bp Rubber Cuff, Pedia 1 Bag Valve Mask, Adult 1 Bag Valve Mask, Pedia 2 Bp Rubber Vault, Adult 2 Bp Rubber Vault, Pedia 1 Cautery Pen With Cautery Tip 4 Cold Compress 2 Cord Clamp X 100 X Box 12 Chromic Atraumatic 1.0 X Piece 12 Chromic Double Arm 2.0 X Piece 12 Chromic Atraumatic 3.0 X Piece 12 Chromic Atraumatic 4.0 X Piece 12 Chromic Atraumatic 5.0 X Piece 5 Cotton 2.0 X Roll, Skin 5 Cotton 400g X Roll 1 Cutting Needles, Assorted X Dozen 20 Catheter, Straight Assorted Sizes/ Pack 30 Clean Gloves, Unsterile Ss / Box 30 Clean Gloves, Unsterile Sm / Box 1 C-collar, Adult 10 Cotton Pledget, Wooden X Box 30 Digital Thermometer 30 `disposable Surgical Head Cap X Pack 30 Disposable Surgical Mask X Pack 80 Disposable Razor X Piece 1 Disinfectant X Gallon 15 Disinfectant Spray 400g X Bottle 2 Disposable Surgical Blade # 10 X Box 2 Disposable Surgical Blade # 12 X Box 2 Disposable Surgical Blade # 15 12 Ecg Paper 50 X 30mm X 10 30 Ecg Electrode X Piece 25 Elastic Bandage 2x5 X Roll X Piece 20 Elastic Bandage 3x5 X Roll X Piece 20 Elastic Bandage 4x5 X Roll X Piece 10 Et Tube Id 2.5 X Piece 10 Et Tube Id 3.0 X Piece 10 Et Tube Id 5.5 X Piece 10 Et Tube Id 6.0 X Piece 10 Et Tube Id 6.5 X Piece 10 Et Tube Id 7.0 X Piece 40 Et Tube Id 7.5 X Piece 15 Et Tube Id 8.0 X Piece 12 Foley Catheter F 10 X Piece 10 Foley Catheter F 12 X Piece 10 Foley Catheter F 14 X Piece 50 Foley Catheter F 16 X Piece 20 Foley Catheter F 18 X Piece 15 Feather Blade X Piece 2 Formalin X Liter 10 Gauze Surgical 36 X 100 Yards X Roll 20 Gloves, Sterile 6.5 X Box 20 Gloves, Sterile 7.0 X Box 20 Gloves, Sterile 7.5 X Box 2 Glucometer With Strip 120 Heplock 10 Hot Water Bag X Piece 200 Iv Catheter G 18 X Piece 300 Iv Catheter G 20x Piece 500 Iv Catheter G 22 X Piece 500 Iv Catheter G 24 X Piece 200 Iv Catheter G 26x Piece 2 Kidney Basin, Stainless X Piece 2 Kelly Pad 18 Ky Jelly, 50g X Tube 70 Lidocaine, 2% 500 Macroset 400 Microset 100 Nebulization Kit, Adult W/ Mask 100 Nebulization Kit, Pedia W/ Mask 50 Ngt F 8x Piece 20 Ngt F 10x Piece 20 Ngt F 12x Piece 20 Ngt F 14x Piece 50 Ngt F 16x Piece 30 Ngt F 18x Piece 4 Non Rebreather Mask, Adult 4 Non Rebreather Mask, Pedia 150 Oxygen Cannula, Adult 150 Oxygen Cannula, Pedia 28 Oxygen Canula, Neonate 75 Oxygen Mask, Adult 70 Oxygen Mask, Pedia 40 Oxygen Mask, Neonate 4 Oxygen, Gauge 4 Pulse Oxymeter 50 Plaster, Micropore 1" X 12 X 12mm 4 Povidone Iodine X Gallon 1 Round Neddles , Assorted X Dozen 11 Rubber Suction 2 Rubber Sheet 30 Syringe 1 Ml X 100 X Box 40 Syringe 3 Ml X 100 X Box 40 Syringe 5 Ml X 100 X Box 30 Syringe 10 Ml X 100 X Box 1 Insulin Syringe X 100 X Box 18 Suction Set, F 25 20 Suctiom Cath F8 8 Suctiom Cath F12 10 Suctiom Cath F14 30 Suctiom Cath F16 1 Surgical Clamps, Assorted X Dozen 1 Surgical Scissors, Assorted X Dozen 12 Silk, Surgical With Needle 1.0 X Piece, Round 12 Silk, Surgical With Needle 2.0 X Piece, Round 12 Silk, Surgical With Needle 3.0 X Piece, Round 12 Silk, Surgical With Needle 4.0 X Piece, Round 12 Silk, Surgical With Needle 5.0 X Piece, Round 12 Silk, Surgical With Needle 1.0 X Piece, Cutting 24 Silk, Surgical With Needle 2.0 X Piece, Cutting 12 Silk, Surgical With Needle 3.0 X Piece, Cutting 12 Silk, Surgical With Needle 4.0 X Piece, Cutting 12 Silk, Surgical With Needle 5.0 X Piece, Cutting 4 Sphymomanometer, Table Tap 4 Stethoscope 1 Silk, Braided, Assorted X Box 12 1 Silk, Surgical, Assorted X Box X12 50 Spinal Needle, G25 20 Spinal Needle, G23 50 Soluset 1 Tympanic Thermometer X Piece 5 Triangular Bandage, Medium X Piece 5 Triangular Bandage, Large X Piece 3 Togue Depressor, Woodedn Pack 120 Urine Bag X 2l 12 Vycril 1.0 24 Vycril 2.0 12 Vycril 3.0 12 Vycril 4.0 12 Vycril 5.0 28 Wee Bag 650 Oxygen Refill 4 Expanded Nbs Kit X-ray Supplies 10 X-ray Film 14x17x100’s 10 X-ray Film 14x14x100’s 7 X-ray Film 11x14x100’s 7 X-ray Film 10x12x100’s 7 X-ray Film 8x10x100’s 8 X-ray Envelope 14x17 8 X-ray Envelope 14x14 1 X-ray Envelope 11x14 3 X-ray Envelope 10x12 7 X-ray Envelope 8x10 4 X-ray Fixer Solution Powder 12 X-ray Developer Powder 12 Tissue Double Ply X 12 Roll 15 Face Mask 3 Ply 50’s (local) 12 Garbage Bag (medium) 12 Alcohol 70%, 500ml 6 Disinfectant Spray, 400g 1 Disinfectant (gal,) 11 Latex Examination Gloves, Medium 12 Hand Soap Fresh Melon 6 Detergent Powder 1 Red Light Bulb Dental Supplies 6 Universal Bonding Agent 25 Alcohol,70%,500ml 5 Cotton Roll,400g 12 Denfill Light Curing Composite,flowable 30 Dental Anesthesia,box 1 Dental Bur, Finishing Straight Long/pack 1 Dental Bur,inverted Cone Meduim/pack 1 Dental Bur, Round(small)/pack 10 Dental Proximal Bur 18 Explorer 10 Dental Needle Gauge 30,box,short 6 Dental Needle Gauge 27,box Long 20 Disinfectant Spray, 454ml 8 Disposable Bib Towel,100pcs/pack 30 Disposable Facemask,50's/box 2500 Disposable Paper Cups,6 Oz 3 Disposable Prophy Brush,100pcs/pack 5 Disposable Saliva Ejector Tips,100pcs/pack 7 Etchant Flowable 30 Examination Gloves,medium/box 1 Highspeed Handpiece,2 Hole 10 Bib Holder 15 Mouth Mirror 5 Light Cured Cav-liner,flowable 1 Lowspeed Handpiece Contrangle 1 Polishing Inverted Cone (whitestone)/pack 1 Polishing Round Bur (whitestone)pack 2 Scaler Handpiece, Woodpecker 5 Straight Bur,tapered 1 Surgical Gauze Roll,28x24 Mesh 30 Tissue Paper,12/bale 3 Aspirating Dental Syringe 1 Flexible Dental Elevators,set(3pcs) 4 Dental Plugger 5 Dental Spoon Excavator,small 2 Low And High Speed Lubricant,330ml 10 Cleansing Wipes,80 Sheets/pack 1 Dental Surgical Scissor,curve

Description: BOQ ITEMS: 8 mm thick square edge PVC False Ceiling Detail Specification as per Annexure A, 12 point 5 mm thick tapered edge gypsum moisture resistant board False Ceiling Detail Specification as per Annexure A, Dismantling tile work in floors ,roofs,Wall Detail Specification as per Annexure A, Demolishing brick work manually and by mechanical means Detail Specification as per Annexure A, Brick work with common burnt clay modular bricks I isto 4 Cement Coarse sand Detail Specification as per Annexure A, Plain Cement Concrete 1 isto 4 isto 8 Cement Coarse sand stone ballast Detail Specification as per Annexure A, Rein forced Cement Concrete M20 Grade Cement Coarse sand stone grit 20 mm Detail Specification as per Annexure A, Steel reinforcement for RCC Work Detail Specification as per Annexure A, Vitrified tiles in Wall floor Double Charge Detail Specification as per Annexure A, Vitrified tiles in floor mat and anti skid Detail Specification as per Annexure A, 18 mm thick gang saw cut mirror polished premoulded and prepolished granite Detail Specification as per Annexure A, aluminium work for partitions with extruded built up Detail Specification as per Annexure A, aluminium work for doors window ventilators with extruded built up Detail Specification as per Annexure A, 5 mm glass pan glazing in aluminium door window ventilator shutters and partitions Detail Specification as per Annexure A, 12 mm thick prelaminated particle board flat pressed three layer Detail Specification as per Annexure A, 12 mm thick frameless toughened glass door shutter Detail Specification as per Annexure A, 12 mm thick frameless toughened glass for Fix Partition Detail Specification as per Annexure A, partition upto ceiling height consisting of GI frame and required board Detail Specification as per Annexure A, aluminium American Handle 200 mm Long Detail Specification as per Annexure A, SS Handle 600 mm Long Set Inside and Outside for Toughned Glass Door Detail Specification as per Annexure A, stainless steel Toughned Glass Door Lock Detail Specification as per Annexure A, aluminium die cast body tubular type universal hydraulic door closer Detail Specification as per Annexure A, lock with 6 levers for aluminium Door Detail Specification as per Annexure A, aluminium tower bolts Detail Specification as per Annexure A, Cleaning of Tile by Sand paper scraper or Scraping machine using necessary Floor Cleaner Chemical Detail Specification as per Annexure A, Fiber Glass Molded Gratings over Drain with Frame Detail Specification as per Annexure A, 14 mm thick Thick WPC Panel in Reception area over alumimium Base Pipe Frame with Specialied Clip Detail Specification as per Annexure A, Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster Detail Specification as per Annexure A, 12 or 15 mm cement plaster of mix 1 isto 4 Detail Specification as per Annexure A, Removing dry or oil bound distemper water proofing cement paint Detail Specification as per Annexure A, white cement based putty of average thickness 1 mm Detail Specification as per Annexure A, acrylic distemper ready mixed having VOC content less than 50 gram per litre Detail Specification as per Annexure A, Finishing walls with Acrylic Smooth exterior paint Detail Specification as per Annexure A, Removing dry or Enamel Paint and the like by scrapping sand papering Detail Specification as per Annexure A, Painting with synthetic enamel paint Detail Specification as per Annexure A, Fly proof stainless steel grade 304 wire gauge Detail Specification as per Annexure A, GI chicken wire mesh 24 gauge and 12 mm mesh and 300 mm width Detail Specification as per Annexure A, Disposal of building rubbish malba similar unserviceable dismantled or waste materials Detail Specification as per Annexure A, Chipping of unsound or weak concrete material from slabs beams columns Detail Specification as per Annexure A, Cleaning of reinforcement from rust from the reinforcing bars Detail Specification as per Annexure A, bonding coat of approved adhesive on chipped portion of RCC Detail Specification as per Annexure A, Shotcreting RCC columns beams and slab Detail Specification as per Annexure A, Applying anticorrosive coating with brush to reinforcement Detail Specification as per Annexure A, two coats of SIKA LATEX POWER coating Detail Specification as per Annexure A, anti skid Ceramic glazed floor tiles Detail Specification as per Annexure A, ceramic glazed wall tiles Detail Specification as per Annexure A, Window Roller blinds Curtain Made of Febric material Detail Specification as per Annexure A, Glue based Frosted sheet over Glass Detail Specification as per Annexure A, Wiring for light Fan and for all with Switch 1 point 5 sqmm Detail Specification as per Annexure A, Rewiring for light point and for all with Switch 1 point 5 sqmm Detail Specification as per Annexure A, Wiring for group controlled looped light point for all with Switch 1 point 5 sqmm Detail Specification as per Annexure A, 2 by 1 point 5 sqmm fire alarm armoured cable 600 by 1000V rated with annealed copper Detail Specification as per Annexure A, 25 A modular socket outlet and 25 A modular SP MCB Detail Specification as per Annexure A, FRLS PVC insulated copper conductor single core cable Detail Specification as per Annexure A, led lights in false ceiling 36 wattts 600 by 600 Detail Specification as per Annexure A, Extension of Ceiling Fan Rod including Supply of Rod and Changing Detail Specification as per Annexure A, 400 or 450 mm sweep wall bracket fan including Hanging Bracket Detail Specification as per Annexure A, 1200 mm Ceiling Fan With Fan Regulator Detail Specification as per Annexure A, white vitreous china pedestal type water closet European type WC pan Detail Specification as per Annexure A, wash basin with 15 mm CP brass pillar taps Swan Neck Tap Detail Specification as per Annexure A, white vitreous china pedestal for wash basin Detail Specification as per Annexure A, CPVC pipes having thermal stability for hot and cold 20 mm Detail Specification as per Annexure A, CP Brass or SS Ablution health faucet assembly with 1 m long 15 mm Detail Specification as per Annexure A, CP brass angle valve for basin and points 15 mm Detail Specification as per Annexure A, CP Brass extension nipple 15 by 50 mm Detail Specification as per Annexure A, CP brass long Single Lever body bib cock 15 mm Detail Specification as per Annexure A, PVC connection pipe with brass unions 45 mm long 15 mm nominal bore Detail Specification as per Annexure A, PTMT liquid soap container 109 mm wide 125 mm high and 112 mm Detail Specification as per Annexure A, PTMT towel ring trapezoidal shape 215 mm long 200 mm Detail Specification as per Annexure A, 600 by 450 mm beveled edge mirror of superior glass Detail Specification as per Annexure A, PVC waste pipe for sink or wash basin 32 mm Detail Specification as per Annexure A, UPVC Pipe Type B class including PVC Pipe Fitting Specification as per Annexure A, Nahani Trap 110 by 75 or 110 mm Detail Specification as per Annexure A, Stainless Steel Round Jali size as N trape Detail Specification as per Annexure A, brick masonry gully chamber 50 by 45 by 60 cm internal size Detail Specification as per Annexure A

Details: Description Republic Of The Philippines City Of Lapu-lapu 6015 Bids And Awards Committee Invitation To Bid For The Procurement Of One (1) Unit Patient Transport Vehicle The City Of Lapu-lapu Through The Capital Outlay Funds 9998-1-07-06-010-24s1 Intends To Apply The Sum Of Two Million Pesos (₱ 2,000,000.00 ) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of One (1) Unit Patient Transport Vehicle Under P. R No. 24-10-1509. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The City Of Lapu-lapu Through The Bids And Awards Committee (bac) Now Invites Bids For The Abovementioned Procurement Project. Ldrrmo Item No. Qty. Unit Of Issue Item Description 1. 1 Unit Rescue Ambulance / Patient Transport Vehicle Hi-roof Engine Model: In-line 4- Cylinder, 16 Valves, Variable Turbocharger Transmission: 5-speed M/t (dash-mounted) Displacement: 2,400 Cc - 2,500 Cc Max Power: 125-129ps/3,2000rpm Fuel System: Common Rail Direct Injection Fuel Tank Capacity: 65 Liters Suspension: Front-torsion Bar With Front Stabilizer/rear-leaf Spring Steering System: Power Steering Wheelbase: 2,900 - 2950 Mm Minimum Turning Radius: 5.2m Seat Material: Fabric Safety Features: Dual Srs Airbags, With Load Sensing Valves (lvs), Seat Belt, Seat Belt Reminder (driver), High Mount Stop Lamp Warranty: 3 Years Warranty Or 100,000 Km Whichever Comes First - Vehicle Only Patient Transport Vehicle (ptv) Kit Features: -collapsible Stretcher -fire Extinguisher -spine Board -iv Hook -wall-mounted Bp Apparatus -first Aid Kit -ambubag - Pedia & Adult -stethoscope -fluorescent/ Dome Light -top Light W/ Pa System -aluminum Flooring -power Outlet & Power Inverter -oxygen Tank W/ Content -oxygen Regulator -aluminum Medicine Cabinet -divider W/ Sliding Window (separating The Driver & Rear Passenger) - Overhead Grabrail - Stainless Read Guard (for Stretcher) - Three-seated Side Passenger Seat & One-seated W/ Compartment & Seatbelt - Ambulance Stickers Inclusions: 3 Years Lto Registration, 1 Year Gsis Insurance - Compre & Ctpl, Ewd & Tint Terms & Conditions: - Delivery: Terms Required In Purchase Order/ Contract And Availability Of Lto Registration. The City Of Lapu-lapu Now Invites Bids For The Above Procurement Project. Delivery Of The Vehicle Is Required Within Sixty (60) Calendar Days Upon Receipt Of Notice Of Award/purchase Order. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Prospective Bidders May Obtain Further Information From The City Of Lapu-lapu Through The Bids And Awards Committee, Located At The 2/f City General Services Office, City Hall, Pusok, Lapu-lapu City And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m To 4:00 P.m. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From November 28, 2024 (from 8 A.m. To 5 P.m.) Until On Or Before 12 Noon Of December 17, 2024 From Bac Office Located At The 2/floor Of The City General Services Office, City Hall, Pusok, Lapu-lapu City And Upon Payment Of A Non-refundable Fee For The Bidding Documents, Pursuant To The Standard Rates Set On R.a.9184 In The Amount Of ₱ 5,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fee For The Bidding Documents During The Period Provided In The Preceding Paragraph. The City Of Lapu-lapu/ Bac Will Hold A Pre-bid Conference On December 5, 2024 (1:30 P.m.) At Bac Conference Room Located At 2/floor City General Services Office, Pusok, Lapu-lapu City, Which Shall Be Open To Prospective Bidders. Bids Must Be Duly Received By The Bac Secretariat At The Given Address Above On Or Before 12 Noon Of December 17, 2024. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. Bid Opening Shall Be On December 17, 2024 (1:30 P.m.) At Bac Conference Office, Located At 2/floor City General Services Office, Pusok, Lapu-lapu City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. The City Of Lapu-lapu /bac Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: You May Visit The Following: Vanessa Jeanne A. Dela Serna Philgeps: ______ Website: _______ Bac Secretariat 3 Conspicuous Place: City General Service Office Ceo Bulletin: ____ Cgso:____ Market:____ Telephone Number: 340-5735 Ronaldo D. Malacora Officer-in-charge- Cgso Bac Chairperson 28th Day Of November, 2024 (philgeps’ Posting Date)

Details: Description Municipality Of Infanta Infanta, Pangasinan Request For Quotation Rfq No. 2024-11-243 Date: November 28, 2024 The Municipality Of Infanta, Pangasinan Through Its Bids And Awards Committee (bac) Will Undertake Negotiated Procurement - Section 53.9 - Small Value Procurement For The Procurement Of 1 Unit Motorcycle For The Office Of The Municipal Assessor, Lgu-infanta, Pangasinan With An Approved Budget For The Contract Of Ninety Eight Thousand Two Hundred Pesos And 80/100 Centavos Only (php 98,200.00). Please Quote Your Best Price On The Item(s) Listed Below, Subject To The Terms And Conditions Stated Below And Submit Your Sealed Quotation Not Later Than December 4, 2024 At 10:30 A.m. Through The Address Below Subject To The Terms And Conditions Provided In This Rfq: Bids And Awards Committee Local Government Unit Infanta, Pangasinan Attn: Mrs. Teresa M. Arconcil Bac Secretariat Contact Number: 09176201991 Email Address: Infantabacoffice2019@gmail.com Justino M. Madarang Municipal Agriculturist/bac Chairman Terms And Conditions: 1. Only The Suppliers Registered At The Philippine Government Electronic Procurement System (philgeps) Shall Be Allowed To Submit The Quotation. 2. All Entries Must Be Typewritten/printed Legibly In The Bid Form. Failure To Use This Form Will Result To Disqualification Of Your Bid. 3. Bidders Shall Provide Correct And Accurate Information Required In This Form. 4. Bidders May Quote For Any Or All The Items. 5. Any Interlineations, Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By You Or Your Duly Authorized Representative/s. 6. Late Submission Of Quotation Shall Not Be Accepted. 7. Bids Exceeding The Abc For Each Item/lot Shall Be Disqualified. 8. Award Of Contract Shall Be Made To The Lowest Calculated And Responsive Bidder Which Complies With The Specifications And Other Terms And Conditions As Stated Herein. 9. The Lowest Calculated And Responsive Bidder And Shall Be Informed Immediately. 10. In Case Of Two Or More Bidders Are Determined To Have Submitted The Lowest Calculated Quotation/lowest Calculated And Responsive Quotation, The Psa Shall Adopt And Employ “draw Lots” As The Tie-breaking Method To Finally Determine The Single Winning Provider In Accordance With Gppb Circular 06-2005. 11.the Item/s Shall Be Delivered According To The Requirements Specified In The Technical Specifications. 12. The Municipality Of Infanta, Pangasinan Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Technical Specifications. 13. Attach The Following Documentary Requirements: A. Mayor’s/business Permit, Dti, Tax Clearance B. Philgeps Registration Number/certificate C. Omnibus Sworn Statement 14. The Municipality Of Infanta, Pangasinan-bac Reserves The Right To Reject Any Or All Bid Proposals, Or Declares The Bidding A Failure, Or Not To Award The Contract, And Makes No Assurance That A Contract Shall Be Entered Into As A Result Of This Invitation. 15. Liquidated Damages Equivalent To One Tenth Of One Percent (0.1%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. The Municipality Of Infanta, Pangasinan Shall Rescind The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies To It. Municipality Of Infanta Infanta, Pangasinan Page 2 Bid Form Important Notes/instructions 1. Make Sure To Read The Terms And Conditions Stated In The Request For Quotation Before Filling Out This Form. 2. Use This Form For Your Quotation. Additional Bidder’s Proposal Can Also Be Attached To This Form. 3. Ensure To Indicate The Price For The Whole Lot And The Unit Price Per Unit. 4. Ensure To Fill-up The Total Amount In Words. 5. Ensure To Check The “compliance With Technical Specifications” Column. 6. Submit Your Bid In Any Of The Following: A. Sealed In An Envelope, Or B. Email To Infantabacoffice2019@gmail.com Only 7. Failure To Follow These Instructions Will Result To The Disqualification Of Your Entire Quotation/bid. Item No. Items/ And Specification/s (minimum) Quantity Unit Unit Price (in Peso) Please Indicate Your Offer/price Here) Total Amount (vat Inclusive) Compliance With Technical Specifications (please Check) Yes No 1 Motorcycle - Displacement-150 Cc, Fuel Tank-10.3 L, 1 Unit ( ) ( ) Cylinder-1,engine-4-stroke, Ohc Air Cooled, Exhaust Pipes-single, Drive Type-chain Drive, Rpm Max. Torque-5000 Rpm, Fuel Consumption-44.6 Kmpl , Max. Power 11 Hp,no. Of Stroke-4,bore X Stroke-57.30x57.86 Mm, Cooling System-air Cooled,valve Config-ohc Max. Torque-11.60 Nm, Rpm At Maximum Power-7500 Rpm Total Amount In Figures Delivery Period 15 Days State Number Of Days ( ) ( ) Warranty 1 Year State Number Of Months / Years ( ) ( ) Price Validity 60 Days State Number Of Days/ Weeks/ Months/ Years ( ) ( ) Total Amount In Words: Other Requirements: After Having Carefully Read And Accepted Your Terms And Conditions. I/we Quote You On The Item At Prices Noted Above. Printed Name Of Authorized Representative/signature _____________________________________ Position: ________________________________________________________________________ Name Of Company _______________________________________________________________ Tin # _________________________________________________________________________ Address: _______________________________________________________________________ Contact Number: ___________________ Email Address: ________________________date:_________________

Details: Description Invitation To Bid For The Supply And Delivery Of One (1) Unit Van (customized) For Mobility Purposes And Immediate Response During Disaster And Calamilities In The City Of Alaminos, Pangasinan 1. The City Government Of Alaminos, Pangasinan Through The 5% Cdrrm Fund Intends To Apply The Sum Of One Million Three Hundred Fifty Thousand Pesos (php 1,350,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Supply And Delivery Of One (1) Unit Van (customized) For Mobility Purposes And Immediate Response During Disaster And Calamilities In The City Of Alaminos, Pangasinan. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Quantity Unit Of Measure Item Description 1 Unit Van (customized) Specifications: Displacement: 1898cc Transmission: 6-speed Manual Transmission Number Of Cylinders: 4 Number Of Valve: 16 Drive Type: 4x2 Power: 148hp Torque: 350n-m Rpm At Max Power: 3600rpm Rpm At Max Torque: 1800 – 2600rpm Fuel Type: Diesel Fuel Tank Capacity: 76l Weight: 2700kg Wheel & Tires: 15” Steel Tires With Spare Wheel Ground Clearance: 195mm Audio System: Single Din, Bluetooth, Aux-in And Usb Seat: Twelve Capacity, Foldable Bench Vinyl Seats Airconditioning: Manual, Three Dial Type Switch: With Rear Airconditioning System Body: Passenger Van Body: Sliding Lockable Rear Side Windows: 70/30 Full Opening Lockable Rear Door Accessories: Blinker, Search Light And Tow Hook Inclusions: 3 Years Lto Registration Free Pms Labor For 1500km And 5000km Standard Tint Standard Tools Matting Warranty: 3 Years Or 100,000kms (which Comes First) 3 Months Against Inherent Defects Of The Body 2. The City Government Of Alaminos, Pangasinan Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Thirty (30) Calendar Days Upon Receipt Of The Notice To Proceed. Bidders Should Have Completed Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, Otherwise Known As The “government Procurement Reform Act”. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Law Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Interested Bidders May Obtain Further Information From The City Government Of Alaminos, Pangasinan And Inspect The Bidding Documents At The Address Given Below During 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 3-23, 2024 From The Given Address And Website Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents In The Amount Of Five Thousand Pesos (php 5,000.00) At The Bac Secretariat, City Engineering Office, City Of Alaminos, Pangasinan. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The City Government Of Alaminos, Pangasinan Will Hold A Pre-bid Conference On December 11, 2024, 10:00 A.m. At The Bac Office, City Hall Building, City Of Alaminos, Pangasinan Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat On Or Before December 23, 2024, 9:30 A.m. At The City Budget Office, City Hall Building, City Of Alaminos, Pangasinan. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Late Bids Shall Not Be Accepted. Bid Opening Shall Be On December 23, 2024, 10:00 A.m. At The Bac Office, City Hall Building, City Of Alaminos, Pangasinan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 8. The City Government Of Alaminos, Pangasinan Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra No. 9184 & Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 9. For Further Information, Please Refer To: Rolever C. Bernabe / Engr. Wilson C. Rosario Head – Bac Secretariat / Member – Bac Secretariat City General Services Office / City Engineering Office Alaminos City Hall Building Quezon Avenue, Poblacion, City Of Alaminos, Pangasinan (075) 696-1559 / (075)551-3034 Bacseretariat12020@gmail.com Www.alaminoscity.gov.ph Rowena F. Ruiz City Budget Officer Chairperson - Bids And Awards Committee

Details: Description University Of The Philippines Baguio Governor Pack Road, Baguio City, Benguet, Car Vat Reg. Tin: 000-864-006-00007 Telephone No. 074-442-3484 Email Address: Spmo.upbaguio@up.edu.ph Request For Quotation (rfq) Procurement Project: Supply And Delivery Of Various Construction And Hardware Materials For The Repair Of Cac Comfort Rooms Purchase Request No.: 24089 Approved Budget For The Contract: ₱ 52,470.00 Date: 02 December, 2024 Rfq No.: 24-105 Mop: Svp Instructions: 1. Accomplish This Rfq Correctly And Completely. Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By The Bidder Or Any Of Your Duly Authorized Representative/s. 2. Bidder Must Possess Documentary Requirements Such As A Valid Business Permit, Philgeps Registration Certificate, And (for An Approved Budget For The Contract [abc] Above ₱50,000 Except For Shopping As An Alternative Method Of Procurement) A Notarized Omnibus Sworn Statement. These Shall Be Submitted During The Evaluation Of The Offer As Per Appendix A Of Annex "h" Of The Revised Irr Of Ra 9184. Quotations Exceeding The Abc Shall Be Rejected.* In Addition: 2a. For Corporations & Cooperatives: A Notarized Secretary's Certificate Or Notarized Board Resolution; 2b. For Sole Proprietorship: A Notarized Special Power Of Attorney If The Oss Affiant Is Other Than The Sole Proprietor. 3. Warranty**, If Appropriate, Shall Be Six (6) Months For Supplies And Materials, One (1) Year For Equipment From The Date Of Acceptance Of The Procuring Entity. "4. Please Submit Through Email To Spmo.upbaguio@up.edu.ph And Cc: Bac.upbaguio@up.edu.ph With The Subject Heading “rfq No.24-105” Or Physically In An Envelope, Preferably Sealed, At The Supply And Property Management Office, Up Baguio Not Later Than 5:00 Pm On 06 December 2024." 5. Price Validity Shall Be For A Period Of 90 Calendar Days. 6. If Applicable, Bidders Shall Indicate The Brand And Model Number Of The Item/s Being Offered. 7. Failure To Follow These Instructions Will Disqualify Your Entire Quotation. Please Quote Your Lowest Government Price (including Vat) On The Item/s Listed Below, And State The Time Of Which You Can Make Delivery. The Information Stated Below Shall Be The Basis For The Evaluation And Calculation Of Your Quotation. Canvassed By: Colter Chogsayan Mary Anne R. Rivera Head, Spmo Item No. General Description Compliance With Technical Specifications (pls. Check) Brand (n/a If Not Applicable) Unit Of Mea-sure (ex. Pc, Lot, Kl) Qty Unit Price Total Price Quoted Unit Price* Total Quoted Price Yes No Supply And Delivery Of Various Construction And Hardware Materials For The Repair Of Cac Comfort Rooms ₱52,470.00 ₱52,470.00 1 18 Watts Led Panel Light, Round, Recessed Set 12 2 1 Litter Body Filler With Hardener Pcs 4 3 1 Litter Marine Epoxy A & B Pcs 3 4 Plastic P-trap With Flexible Hose 1 1/2" Set 3 5 Latex Primer Paint Gal 3 6 Semi Gloss Latex Paint (white) Gal 3 7 Flat Enamel Paint (white) Gal 3 8 Semi Gloss Enamel Paint (white) Gal 3 9 Angle Valve 1/2" Stainless, 1/2" To 1/2" Single Out Way Pcs 15 10 Stainless Flexible Hose, (lavatory Fixture) 1/2" X 1/2" X 16" Pcs 15 11 C.r Toilet Bowl Water Tank Fittings, Double Push Botton, 1/2" Inlet Set 15 12 Hose Bib Faucet (brass), 1/2" Pcs 6 13 8" Exhaust Fan 26watts Set 6 14 Long Neck Lavatory Faucet, 1/2" Pcs 4 15 Lavatory Faucet, 1/2" Pcs 2 16 4' X 8' X 1/4" Ordinary Plywood Pcs 5 17 1" Common Nail Kgs 1.5 18 3" Common Nail Kgs 3 19 4" Common Nail Kgs 3 20 Tile Grout (white) Pack 3 21 Teflon Tape 1/2" Big Roll 20 Contract Award: Per Lot Delivery Period: Within 30 Calendar Days Upon Receipt Of P.o *indicating A Price/amount Under "quoted Unit Price" Shall Mean That Bidder Will Comply With The Technical Specification Of The Item Even Without A Check On The Compliance Column; Otherwise, Bidder Must Provide A Counter-offer. Reminders: A. A Recently Expired Mayor’s/business Permit Together With The Official Receipt As Proof That The Prospective Bidder Has Applied For Renewal Within The Period Prescribed By The Concerned Local Government Unit. However, A Copy Of Your Mayor's Or Business Permit Shall Be Required To Be Submitted After Award Of Contract But Before Payment. B. Procuring Entities Already Maintaining An Updated File Of Any Of The Bidder’s Above-mentioned Requirements, Whether Through The Philgeps Certificate Of Registration And Membership Or Its Own Records, May No Longer Require Re-submission Of Specific Documentary Requirements. ꙳꙳꙳ Nothing Follows ꙳꙳꙳ Total: ₱ 52,470.00 Total Quoted Amount In Words: After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Items At Prices Noted Above. Name Of The Company: Tel. No. : Address: Fax No. : Name Of Representative: Email Address: Position: Signature: Date:

Details: Description Supply And Delivery Of 4 Units Four-wheel Drive Tractor Abc: P16,400,000.00 A. Prime Mover - Rated Power: 67.14 Kw Hp, Minimum - No Of Cylinder: 4 Cylinder - Stroke And Cycle: 4 Stroke Cycle - Cooling System: Water-cooled - Fuel Injection System: Direct Injection - Fuel Ignition/fuel: Diesel B. Performance/classification - Hitch Category: Category 2&3 - Hydraulic Lift: 15 Kn, Minimum - Pto Power: 85% Of The Engine's Maximum Power, Minimum - Specific Fuel Consumption @ Max. Pto Power: 280g/kw-hr, Maximum -aspiration Method: Turbocharged -steering System: Hydraulic Power/full Hydrostatic -transmission System: 8f/2r, With Differential Lock -brake System: Hydraulic/mechanical -no. Of Drive: 4 Wheel Drive -noise Level: 90db (a), Maximum C. Accessories - With Roll Over Protective Structure (rops), Seatbelt, Canopy, Three-point Linkage: Category 1, Pto Casing/cover -with Set Of Heavy Duty Tools: A. One (1) Set Of Open Wrench (size:6-32mm, Minimum) B. (for Items B, Which Ever Is Compatible To The Offered Units) One (1) Set Allen Type Wrench (for Star And Hexagon) / One (1) Piece Each Or Combination Of Philips And Flat Screw Driver C. One (1) Pair Of Mechanical Pliers D. One (1) Piece Adjustable Wrench (size:12, Minimum) E. One (1) Piece Grease Gun (100cc, Minimum) F. One (1) Piece Tire Wrench (compatible To The Offered Units, At Least 2 Different Sizes) G. One (1) Piece Hydraulic Jack" -with Heavy-duty Toolbox That Can Accommodate All Of The Abovementioned Items Except Hydraulic Jack And Tire Wrench. -with Original Equipment Manufacturer (oem) Manual -with Slow Moving Emblem At The Back Of The Tractor -with Early Warning Device -hydraulic Control Valve: Auxillary Or Integral D. Implement Disc Plow: -width Of Cut:1,100mm, Minimum -no. Of Disc/blade: 4 -average Depth Of Tillage: 190 Mm, Minimum -actual Field Capacity: 0.4 Ha/hr, Minimum -diameter: 26 Inches -field Efficiency: 85%, Minimum -fuel Consumption: 11l/hr, Maximum Harrow: -average Width Of Tillage: 1700 Mm, Minimum -no. Of Disc/blade: 20, Minimum -actual Field Capacity: 1 Ha/hr, Minimum -diameter Of Blade: 24 Inches, Minimum -field Efficiency: 90%, Minimum Trailer: -capacity: 5 Tons, Minimum -tire: 7.5x16, 8pr, Pneumatic, Must Be Manufactured Not Earlier Than Year 2024 -dimension: 10 Ft X 6ft X 2ft (lxwxh) -rim: Ring-lock Type -tow Bar Is Parallel To The Ground When Attach To Tractor Hitch With Tailgate -with Leaf Spring Suspension Corn Seeder With Fertilizer Applicator -effective Field Capacity: 0.75ha/hr, Minimum -seeding Rate: 20 Kg/ha, Minimum -mechanism: Pneumatic -no. Of Rows: 4 Rows, Minimum -with Adjustable Hill/row Spacing And Depth Hill Spacing At Least 15-30 Cm Row Spacing :70+- 10 Cm -missing Hills: 8%, Maximum -with Replaceable Seed Plates: 2 Sets, Minimum E. Warranty: -1 Year Warranty On Parts And Services And Two (2) Years On The Engine F. Other Requirements: -with Da Logo (all Weather Type Sticker (vinyl Sticker), 10 Inches In Diameter) -with Amtec Test Result For Tractor Alone -with Amtec Test Result For Disc Plow Coupled With Tractor -with Amtec Test Result For Disc Harrow Coupled With Tractor - With Amtec Test Result For Corn Seeder With Fertilizer Applicator Coupled With Tractor -with Certificate Of Conformity For Tractor -with Namdac Certificate -with Pto Certificate By Bafe -materials And Other Components Shall Be All Brand New -shall Provide Diesel Fuel (at Least Half Of Tank Capacity) And Engine Oil In Every Units -specification Should Be Signed And Sealed By An Abe With Valid Prc Id And Ptr -bidder Should Have Service Center (owned And Managed) Within Region12 -the Technicians Of The Mfaddies And Or Its Accredited Service Center Must Have A Tesda National Certificate Ii(ncii) Relevant To The Job Or An In House Training. -no Reported Major Breakdown For Products Under Warranty In The Last 72 Hours Upon Receipt Of Complaint/s -control Instructions And Label Of The Machine & Engine Should Be In English -must Conduct Training In Operations And Maintenance On Recipient/s D. Warranty -one (1) Year For Machine And Two (2) Years For The Engine Delivery Period: 45 Calendar Days Delivery Sites: Da Tupi Res, Tupi, South Cotabato Note: All Units Shall Be Inspected @ Da-tupi Res, Including The Conduct Of Acceptance Testing & Operations And Maintenance Training To The Recipient. Units Must Be Delivered To The Recipients (see Annex A) After The Conduct Of Operation And Maintenance Training. Cost Of Bidding Documents: P25,000.00 1. During Buying Of Bidding Document: Must Submit Letter Of Intent (loi) And Present The Following Eligibility Document: A. Certificate Of Registration From Philgeps (platinum Membership) B. Registration Certificate From Sec/dti/cda C. Mayor/business Permit D. Tax Clearance 2. In Case Of Representative: Must Submit A Copy Of Board Resolution Or Secretary’s Certificate/special Power Of Attorney Whichever Is Applicable Coupled With Specimen Signa Ture.

Details: Description 96 Bags Portland Cement 6 Cu.m Crushed Gravel 20 Pcs 12mm ? Rsb 55 Pcs 10mm ? Rsb 13 Kgs #16 Gi Tie Wire 37 Pcs Cutting Disc #4 (steel) 30 Pcs 2 X 2 X 10 Gl (forms) 10 Pcs 1/4 X 4 X 8 Plywood (forms) 15 Kgs Cwn Assorted 3 Rolls #90 Dolphin Nylon 505 Pcs Chb 4 7 Cu.m Washed Sand 28 Pcs 10mm ? Rsb 1 Kg Concrete Nail 19 Pcs 2 X 3 X 2mm Tubular Pipe (rafter & Girt) 20 Pcs 2 X 3 X 1.5mm C-purlins 5 Pcs 2 Gi Pipe Schd 40 75 Lm Pre-painted Corr Span (7.00m) 1,200 Pcs Tek Screw 10 Kgs Welding Rod Spl 1 Pc Cutting Disc #14 (steel) 4 Pcs Pre-painted End Flushing 12 Pcs Pre-painted Bended Fascia 9 Boxes Blind Rivets 1/8 X 3/4 60 Pcs Drill Bit 1/8 1 Gal Vulcaseal 25 Pcs 1/4 X 1 Flat Bar (fascia Frame) 6 Pcs 12mm ? Plain Round Bar (sag Rod) 2 Rolls Wire Mesh 2 Rolls Mosquito Net 70 Pcs 2 X 2 X 8 Gl (studs) 70 Pcs 1/2 X 2 X 8 Kd Edging 80 Pcs Metal Furring 20 Pcs 1/4 X4 X 8 Hardiflex 1 Box Black Screw 3 Sets Flush Door W/ Jamb (0.80m X 2.10m) 5 Pairs Lp Hinges 3 Sets Door Knob 152 Pcs Ceramic Tiles (0.60m X0.60m) 18 Bags Tile Adhesive 1 Cu.m Washed Sand (bistay) 4 Pcs Cutting Disc #4 (mason) 2 Pcs Stair Nosing 4 Packs Tile Grout 8 Pcs Down Reccessed 9w Led 2 Rolls Thhn/thwn Wire # 14 2 Rolls Thhn/thwn Wire # 12 2 Rolls Flexible Hose 1/2 20 Pcs 1/2 Pvc Pipe 4 Sets Tumbler Switch 2 Gang 8 Sets Convenience Outlet 3 Gang 5 Rolls Electrical Tape 1 Can Solvent 20 Pcs Pvc Elbow 1/2? Long 20 Pcs Pvc Adaptor 1/2? W/ Locknut & Bushing 20 Pcs Pvc Junction Box W/ Cover 15 Pcs Pvc Utility Box 1 Pc Pvc Pipe 11/2? X 10 Orange 1 Pc Entrance Cap 11/2 2 Pcs Pvc Elbow 11/2 2 Pcs Pvc Adaptor 11/2? W/ Locknut & Bushing Panel Board; 3phase 230v Bolt-on Type W/ 150 Amps Main Circuit Breaker 1 Set 3phase 230v And Branches 2 Pcs 2 Set - 2p 15at 2 Pcs 2 Set - 2p 20at 2 Pcs 2 Set - 2p 30at 1 Pc Pull Box 10 X 10 X 6 W/ Cover 6 Pcs Pvc Pipe 1/2?x 10 Eslon Blue 12 Pcs Pvc Elbow 1/2 12 Pcs Pvc Adaptor 1/2 10 Pcs Pvc Tee 1/2 2 Pcs Gate Valve 1/2? Kitz 5 Pcs Pvc Pipe 2? X 10 Orange 8 Pcs Pvc Elbow 2? X 90? 8 Pcs Pvc Elbow 2? X 45? 2 Pcs Pvc P-trap 2 2 Pcs Pvc Wye 2 2 Pcs Pvc Tee 2 3 Rolls Teflon Tape 3/4 1 Can Solvent Cement 400cc 4 Tins Flat Latex Paint (boysen) 4 Tins Semi Gloss Latex (boysen) 4 Quarts Acry Color (raw-sienna) 4 Gals Qde 15 Pcs Roller Brush #6 15 Pcs Baby Roller 4 (cotton) 15 Pcs Paint Brush 2 10 Pcs Paint Tray 5 Mtrs Sand Paper #100 1 Gal Polituff W/ Hardener 3 Bags Skim Coat 15 Pcs Masking Tape 3 Pairs Putty Knife 10 Pcs 1 X 1 X 8 Kd