Valve Tenders

Description: Kit Of Spares For Triple Valve Stabilising Valve Comprising Of 04 Items Etc.

Description: CATEGORY: ROUGH M/CD FORGING FOR SEALING RING (HW-287.54. A/HW-287.54) -- ITEM AS PER DRG. 31050509995 REV. 00 WI , ROUGH M/CD FORGING FOR ANGLE RING (HW-278.47) - - ITEM AS PER DRG. HW-278.47. F WITH MATL. HW19386 REV , ROUGH M/CD FORGING FOR VALVE CONE (HW- 278.95) -- SIZE OD-220 MM & TH. 40 MM WITH MATL. HW19386 REV. 0 , ROUGH MACHINED FORGING FOR ANGLE RING (HW-169.13) -- ITEM AS PER DRG. 21050109009. F WITH MATL. HW193

Description: Stabilising Valve For Ep Brake Unit

Description: Disposable Type Respirator With Valve 3 M Brand Or Venus Or Msn As Per Is: 9473/2002 Amndt.1.

Description: Rate Contracte For A Period Of 1 Year For Valves

Details: The Contractor Shall Provide Maintenance And Repair Services For The Chilled Water System At The Whiteriver Indian Health Service Hospital (wrsu), 200 West Hospital Drive. The Chilled Water System Includes Two Chillers, Two Cooling Tower, Valves, Motors, Variable Speed Drives, Pumps, And Piping. This Scope Of Work Includes All Chilled Water System Components From The Chillers To The Air-handling Units (ahu), But Excludes Each Ahu Coil. The Point Of Demarcation Shall Be The Ahu Coil Isolation Valves On The Coil Side. includes Performing Chilled Water System Minor And Major Scheduled Maintenance, Associated Repairs Identified During Scheduled Maintenance, Calibrations, Water Treatment, Troubleshooting, Unscheduled Repairs, Testing, And Inspections To Include Completing Required Documentation. see Attachments For More Information.

Description: Contract notice - General guideline, standard regulation, open procedure (construction work) Lot 2.5 - Compressed air technology and pre-ventilation, filtration, supply and installation of: - 1 pre-ventilation blower as a rotary piston blower 450 M³/h at 250 Mbar - 1 thermal mass flow measurement - ... MoreLot 2.5 - Compressed air technology and pre-ventilation, filtration, supply and installation of: - 1 pre-ventilation blower as a rotary piston blower 450 M³/h at 250 Mbar - 1 thermal mass flow measurement - 2 piston compressor systems with integrated working pressure reservoir 150 L/min at 8 bar - Compressed air preparation consisting of a coalescence filter, refrigeration dryer and adsorption dryer - 17 valve islands in wall cabinets - Aeration system for approx. 280 m² inlet channel - Approx. 750 m polyamide control air line - approx. 300 m stainless steel line with press fittings - approx. 150 m welded stainless steel line and the associated - functional test/commissioning/trial operation - engineering project management lot 2.5 - compressed air technology and pre-ventilation, filtration delivery and installation of: - 1 pre-ventilation blower as rotary piston blower 450 M³/h at 250 Mbar - 1 thermal mass flow measurement - 2 piston compressor systems with integrated working pressure storage 150 L/min at 8 bar - compressed air preparation consisting of coalescence filter, refrigeration dryer and adsorption dryer - 17 valve islands in wall cabinets - aeration system for approx. 280 m² inlet channel - approx. 750 m polyamide control air line - approx. 300 m stainless steel line with press fittings - approx. 150 m Welded stainless steel pipe and associated - functional testing/commissioning/trial operation - engineering project management

Description: CATEGORY: Supply and replacement of Canopy , Labour Charge for Canopy fixing , Supply and replacement of engine oil , Supply and replacement of Oil Filter , Supply and replacement of Fuel Filter , Supply and top up of Coolant , Supply and fixing of Wheel covers plates , Supply and replacement of thermostat , Supply and replacement of Mufflers , Supply and replacement of Oil filter , Complete checking and Supply and fix of damage Wiring Harness. , Supply and replacement of Starter Relay , Complete cleaning checking of Air locking system complete cleaning checking , Checking and replacement of all drives belts water pump belt tension , Checking and replacement of Brake Valve , Supply and replacement of Side Mirror Rod , Over hauling clutch master and slave cylinder, replacement of clutch fluid and clutch plate , Dismanteling of Bonnet for Denting and Painting and refitting complete , Repair to Hand brake lever, cleaning and refitting complete , Taking down all wheel and rotate the all tyres and complete re fixing properly

Description: Scrap Stainless Steel Cut Up Parts Of Cond. Wagons To Be Sold Without Bogie And Excluded Fittings As Per Crse/ Bsp Letter No. Mech. /hq/ 003/007 /4016 Dt. 12.11.2018 [excluded Fittings-coupler Body, Knuckle, Knuckle Pin, Draft Gear, Yoke ,bogie End Pull Rod, Brake Cylinder Complete With Piston Rod And Suspension Bracket, Yoke Pin,ctrb, Wheel Sets And Roller Bearing, Bogies, Icf Trolley Bvzi, Distributor Valve.] & Front Follower Of Draft Gear Vide Pcme/bsp's Letter Mech/hq/010/010/warranty Dtd. 09.06.2020. Remark: 1. Wagons May Be Grounded For Clearing Of Track. 2.wagon Component Must Be Cutup Before Lifting By The Purchaser, So That Component Can Not Be Re-used. 3. Boxnr Wagons Having Stainless Steel (irs M44) Side Body, End Body & Floor Are Upgraded & Rehabilated Version Of Boxn Wagons. 4. Weight Is As Per The Challan Provided By The Stock Holder And It Is For Reference Only. 5. To Be Sold On "as Is Where Is Basis"

Description: CATEGORY: Stationary Valve Regulated Lead Acid Batteries (V2) as per IS 15549 (Q3)