Ups Tenders

Details: Description Item No. Specification Statement Of Compliance “comply” Or “not Comply” 1 Supply, Delivery, Installation, Testing And Commissioning Of Supervisory Control And Data Acquisition (scada) System For Koronadal Public Market Water Supply System A. General 1. Scope A. The Scope Of Work Shall Be To Supply, Install, Test And Commission The Supervisory Control And Data Acquisition (scada) System For Koronadal Public Market. All The Required Parameters Shall Be Transmitted To City Of Koronadal Water District Main Office As The Central Command Center. B. The Scada System, In General, Performs The Following Tasks But Not Limited For Specified Parameters: I. Monitoring Functions Ii. Controlling Functions Iii. Graphical Displaying Functions Iv. Reporting Functions V. Alarming Functions Vi. Trending Functions Vii. Data Storage Viii. Other Related Functions That May Be Required By The Ckwd Not Stated Herein. 2. Conditions A. The System And Instruments Should Be Brand-new Specifically The Programmable Automation Controllers, Sensors, Variable Frequency Drives (vfd), Pumps, Motors, Electromagnetic Flowmeters, And Scada Software. B. The Supplier Shall Furnish All Labor, Materials, Tools, Equipment, Transport, Supplies And Other Services To Complete The Scada System And Shall Be Responsible For The Proper Installation Of The Supplied Equipment And Software. C. The Supplier Shall Install The Equipment And System Within One Hundred Twenty Days (120) Days After Signing Of Notice To Proceed (ntp). The 15-day Time Frame Shall Be Allotted In Order To Check The Proper Alignment Of The Pump/ Motor Assembly And Make Necessary Corrections Of Both Mechanical And Electrical Failures Found During Installation And Construction. The Supplier Shall Inform The Ckwd Measures And Proper Procedures On Its Operation To Guarantee A Smooth And Proper Function Of The Newly Installed Units And System. D. Field-testing Shall Be Made Once The Mounted Equipment Is Ready For Operation And When Both The Ckwd And Supplier Have Finished Their Scopes Of Work On The Installed Unit. During The Installation And Commissioning Of The Scada System, The Supplier Is Required To Assign A Technician Responsible For Overseeing The Commissioning Process. All Associated Costs, Including Transportation, Accommodation, Allowances, And Other Incidental Expenses, Shall Be Covered By The Supplier. E. The Supplier Shall Be Liable For Any Damages To Materials, Electro-mechanical Equipment’s Such As But Not Limited To Pumps And Motors, Variable Frequency Drive (vfd), Flowmeter, Level And Other Electro-mechanical Devices During Testing And Commissioning Of The Scada Project And Shall Be Required To Replace Immediately To Any Incur Defects Without Cost To Ckwd. All Incidental Expenses Including The Pulling Out And Transporting Of The Unit Shall Be Borne By The Supplier. F. In Accordance With The Electricity Safety Regulations, Supplier Is Strictly Prohibited From Connecting, Or Allowing To Remain Connected, Any Wiring Or Equipment In Unsafe Conditions To An Electrical Installation Or Power Supply. Additionally, To Control Hazardous Energy Sources, Standard Regulations Require That Machinery And Equipment Be Isolated From Their Energy Sources And Secured With A Lockout Or Tagout System Before Any Servicing Or Maintenance Is Performed. G. The Supplier Shall Provide A Comprehensive Warranty Covering All Parts And Labor For A Minimum Period Of One Year From The Date Of Delivery And Installation Of The Equipment And System. H. In Case Of Any Malfunction, Defect, Or Failure Of The Equipment And System During The Warranty Period, The Supplier Shall Offer Repair Services At No Additional Cost To The Buyer. I. The Supplier Must Respond To A Warranty Repair Request Within 24 Hours Of Notification By The Buyer. The Supplier Is Required To Complete The Repair Or Provide A Replacement Within A Maximum Lead Time Of 1 Week From The Time Of Notification. This Includes The Time For Diagnostics, Shipping Of Parts, And On-site Or Off-site Repair As Necessary. J. If The Repair Cannot Be Completed Within The 1-week Lead Time, The Supplier Must Provide A Temporary Replacement Of Equivalent Specifications At No Extra Cost To The Buyer, Until The Original Equipment Is Repaired And Returned To Full Working Condition. K. The Supplier Is Required To Maintain High Standards Of Housekeeping Throughout The Entire Project Duration. They Shall Be Fully Responsible For Managing And Securing Their Own Materials, Equipment, And Tools To Prevent Any Potential Accidents Or Safety Hazards In The Workplace. L. All Equipment/ Materials Must Be Brand New. 3. Location The Assembly Shall Be Installed At Koronadal Public Market, Purok Kaunlaran, Brgy. Zone I, City Of Koronadal. 4. List Of Major Components Item No. Item Quantity 4.a Programmable Logic Controller 1 4.b Human Machine Interface (hmi) 1 4.c Scada Software 1 4.d Workstation Pc 1 4.e Ethernet Switch 2 4.f Un-interruptible Power Supply 1 4.g Monitor 55" 1 4.h Wireless Antena (tx/rx) With Pole 2 4.i Variable Frequency Drive 2 4.j Pumps & Motors 2 4.k Water Level Monitoring Transmitter 4 4.l Electromagnetic Flowmeter 1 4.m Power Meter 1 4.n Fabricated Coated Panels W/ Complete Assembly 1 4.o Surge Protection Device 1 4.p Butterfly Valve With Actuators 2 4.q Pressure Transmitter 2 5. Major Components Specifications It Shall Meet The Following Operating Requirements: Description Specifications 5.a Programmable Logic Controller Digital Input 28 24 Vdc/vac Inputs, Up To 6 High Speed Counter Channels Relay Output 20 Relay Output Power Supply 24 Vdc Communication Embedded Usb Programming Port, Ethernet Port, Non-isolated Rs232/485 Serial Port Plug-in Ports 5 Plug-in Ports, Up To 4 Expansion Modules 5.b Human Machine Interface (hmi) Display 10.4 In. Display, Aluminum Panel With Resistive Touch Resolution 800x600 Or Higher Case Zinc-coated Skin Pass Steel Power Supply 24vdc (9 - 32vdc) Isolated Interface Ethernet: 2x Gigabit Ethernet (rj45), Usb: 2x Usb 3.0 (type-a / Host) Serial: 1x Rs232/422/485 (db9m) Isolated Operating Temperature 0° - 50°c Approvals Ce, Culus Listed, Ukca, Atex, Kc, Rcm 5.c Scada Software Scada Should Support Unlimited Displays, Unlimited Web Clients And Tags To Accommodate Future Integration With Our Pumping Stations. For Future Expansion, Scada System Shall Have Dual Monitor Capability To Provide Enhanced Visibility And Operational Efficiency. Data Logging To Odbc-compliant Database Such As Microsoft Sql Server Or Historian. 5.d Workstation Pc Cpu At Least 12th Gen Or Higher Intel Core I5 Storage (os) 256gb M.2 Gen 4 Nvme Ssd Storage (data) 2x1 Tb 7200 Rpm Hdd Or Higher Raid 0, 1, 5 Support Operating System Windows 10 Pro Or 11 Pro Memory 8gb Non-ecc Ddr5 Or Higher Display Output 2 X Displayport 1.4a Hbr2 Ports Ethernet Port Rj45 (1 Gbe) Ethernet Port Chassis/form Factor Tower 5.e Ethernet Switch Type Managed Switch Rj45 Ports Minimum 5x10/100baset Operating Temp -20 ~60 Deg. C Vlans Supported Secure Connectivity With Ssh And Https Supported 5.f Un-interruptible Power Supply Supplied Scada Product Must Have The Capacity/facility To Contain Battery-backed Memory For The Duration Of At Least One (1) Day Dedicated For The Plc's Programming And Configuration. System Must Be Able To Send Alerts For Power Outages. An Industrial Type Uninterruptible Power Supply (ups) Must Be Present For Plc Back-up For At Least Fifteen (15) Minutes. It Must Also Support Local And Remote Firmware Upgrade. 5.g Monitor Size: At Least 55" Mounting: Wall Mounted, Inclusive Of Installation 5.h Wireless Antenna (tx/rx) With Pole (communication Complete Set) Power Supply 24v, 0.3a Gigabit Poe Adapter Max. Power Consumption 7w Power Method Passive Poe Gain 23 Dbi Networking Interface (1) 10/100/1000 Ethernet Port Wind Survivability 200 Km/h Security Wpa2 Long-range Point-to-point (ptp) Link Mode 5.i Variable Frequency Drive Motor Power, Hp [kw] 1 Step Higher For 10hp Motor Ac Voltage Range 380v – 500v Voltage % Tolerance +10%, -15% Supply Number Of Phase 3 Phase Total Harmonic Current Distortion (thdi) 30 – 45% Prospective Short Circuit Current (kaic Rating) 65ka Nominal Current 52a Enclosure Rating Ip55 Local Control Panel W/mobile Phone Bluetooth Connectivity And Clear Display Vfd Features Motor Pre-heating Function Built-in Pid Control Built-in Safe Torque Off (sto) Function Full-text Diagnostic Display Dtc Control For Precise Torque Control And Enhance Energy Efficiency Removable Memory Unit For Faster Drive Replacement Digital Variable Frequency Drive That Is Scada Ready And Has Integrated Emc Filter. Complete Protection Against Over/under Voltage, Thermal Overcurrent, Lock Rotor, Ground Fault, Under Current, Definite Time Overcurrent. Digital Monitoring Of Voltage, Current, Frequency, Energy, Kw, And Fault History The Vfd Will Be Controlled Via Fieldbus. Status Updates, Diagnostic Faults, And Alarms Will Be Visible On Both The Hmi And Scada System. 5.j Pumps & Motors Number Of Pump And Motor 2 Units Pump Type Vertical In-line Maximum System Pressure 120 Psi Actual Calculated Flow 3.5 Liters Per Second Maximum Flow 5.0 Liters Per Second Mains Supply 230v Resulting Head Of Pump 35 Meters Head (maximum) 50 Meters Manifold Sizes (inlet And Outlet) 100 Mm Pump Parts In Contact With The Pump Liquid Made Of Stainless Steel Pump Bases And Heads Made Of Cast Iron; Other Vital Parts Are Made Of Stainless Steel Motor Rating 5 Hp, 230v, 3 Phase, 60 Hz 5.k Water Level Monitoring Transmitter Principle Radar Sensor Range Up To 8 Meters Output 4-20ma Beam Angle 8° Operating Voltage 12 - 35 V Dc Protection Rating Ip66 Or Higher Maintenance-free Operation Due To Non-contact 80 Ghz Radar Technology 5.l Electromagnetic Flowmeter Sensor Size Mm (in): 150 (6) Environment Protection Rating: Ip67/nema 6 Accuracy: ±0.2% Qmax (m3/hr): 700 Or Higher Qnominal (m3/hr): 600 Or Higher Qtransitional (m3/hr): 5 Qmin (m3/hr): 3.5 Or Lower Cable: 20 Meters (capable Upto 100m Or Higher) Flange Type Connection: Pn16 Lining Material: Elastomer Flange Material: Carbon Steel Housing Material: Carbon Steel Measurements: Direct/inverse Flow Transmitter Transmitter Mounting: Remote Power Supply: 85 To 265 V Ac Current Output: 4 To 20 Ma Security: Read-only Switch And Ultra-secure Service Password Digital Outputs: Three (3) Configurable Pulse/frequency And Alarm Outputs Fit-and-flow Data Storage Inside The Flow Meter Which Eliminates The Need To Match Sensor When Replace Self-calibrating Capabilities 5.m Power Meter Data Port Ethernet Interface Modbus Tcp Or Its Equivalent Supply Voltage 95-240v Ac; 110-340v Dc Digital Input 1 Or Higher Digital Output 1 Or Higher Degree Of Protection Ip65 Or Higher 5.n Fabricated Coated Panels W/ Complete Assembly Shall Provide Newly Fabricated Powder Coated Panels With A Complete Set Of Wiring Consumables For Network And Monitoring Of All Required Parameters. - Programmable Logic Controller - Human Machine Interface (hmi) - Io Modules - Circuit Breaker Protection - Power Meter - Surge Protection Device - Uninterruptible Power Supply - Exhaust Fan Shall Be Installed Inside The Control House And Shall Be Properly Ventilated 5.o Surge Protection Device Protection Performance Maximum Of 30 Microsecond Radius Of Protection 72 Meters Minimum 5.p Butterfly Valve With Actuators Size In (mm) 6” (150) Butterfly Valve Body Material Cast Iron Butterfly Disc Stainless Steel 304 Or 316 5.q Pressure Transmitter Measuring Range 0 To 16 Bar G (0 To 232 Psi G) Or 0 To 25 Bar G (0 To 363 Psi G) Current Output Signal 4-20 Ma Degree Of Protection Ip65 Or Higher 6. List Of Human Machine Interface (hmi) Alarms Item No. Alarm Descriptions 6.a Under Voltage 6.b Over Voltage 6.c Over Current 6.d Water Level Reservoir (cistern) Low Level 6.e Water Level Reservoir (cistern) High Level 6.f Water Level Right Building Low Level 6.g Water Level Right Building High Level 6.h Water Level Left Building Low Level 6.i Water Level Left Building High Level 6.j Discharge Line High Pressure 6.k Discharge Line Low Pressure 6.l Low/high Flowrate 6.m Submersible Motor Tripped 6.n Motor Control Panel High Temperature 6.o Motorized Valve (on/off Status) 6.p Vfd Alarms 7. System Architecture 8. Personnel Requirements The Contractor Shall Provide The Minimum Number Of Personnel For The Project, As Detailed In The Table Below. These Roles And Responsibilities Ensure Thorough Coverage Of All Project Aspects. Quantity Description 1 Project Engineer (pee) 2 Technical Engineers (electronics And Communications Engineer) 2 Technical Engineers (registered Electrical Engineer) To Ensure Qualified Personnel, All Professionals Must Have A Valid Unexpired Prc License. 9. Schedule Of Payment The Contract Duration Is One Hundred Twenty (120 Cd) Calendar Days Starting Upon Receipt Of Notice To Proceed. All Reports And Related Documents Must Be Submitted To The City Of Koronadal Water District Project Engineer And Should Be Officially Acknowledge Monthly. The Following Are The Schedule Of Payments: Payment Description Percentage Of Contract Price Remarks First Payment Upon Completion Of Item Orders 10% Must Submit Certification That All Components Are Ordered, Attached Proof Of Order From Suppliers Second Payment Upon Delivery Of All Items At Ckwd Facility 30% Must Compile And Submit All The Delivery Receipt Acknowledge By Ckwd Personnel Third Payment Upon Reaching 40% Of Project Accomplishment 30% Must Submit Certification That The Project Reached 40% Of Its Completion And Approved By The Ckwd Project Engineer Final Payment Upon Project Completion And Acceptance 30% With 5% Retention Upon Completion Total 100% B. Additional Requirements (compliance Upon Submission Of Bid) 1. Must Submit Original Catalog / Brochure For Vfd, Pump And Motor, Flowmeter, And Valve (please Specify Offered Product). 2. The Manufacturer Should Have Iso 9001:2015 Certificate Or Any Proof Of Renewal If Expired. 3. Minimum Manufacturer's Warranty Of One (1) Year. 4. Certification On Compliance To The Following: A. Reports: Indicate All The Fault Alarms From Vfd, Pressure, Flow, Level, And Other Protective Devices To Command Center. B. Trends And Data Logging: That Ckwd Will Provide The List Of Variables To Be Included In The Trend And Shall Be Logged Continuously In The Hard Drive For Historical Trending With Reference To The Monitoring Requirements. C. After Sales Service: After The Final Acceptance, The Contractor Shall Conduct A Monthly Site Visit Within The Warranty Period. The Contractor Shall Have 24/7 Availability Of Technical Engineers Within Mindanao Island. Must Submit Notarized Statement Of Undertaking Stipulating Availability Of Skilled Personnel Within Mindanao. D. Site Visit: The Bidder Shall Conduct A Site Visit/survey On Or Before The Pre-bid Conference Schedule To Ensure That They Know The Status/set Up Of The Project Site. Must Submit Certification Signed By Ckwd Project Engineer In-charge. E. Warranty: All Components Shall Be Guaranteed Against Defects In Workmanship And Materials For A Period Of One (1) Year From The Date Of Project Completion. Defective Components Or Parts Discovered Within The Warranty Period Shall Be Replaced Without Charge Or Additional Cost To Ckwd. 5. Bidders Qualifications: A. Must Submit Certification Or Any Document That The Bidder Has A Regional Presence Or A Regional Service/support Partner/center Within Mindanao. B. Bidder Must Be An Authorized Distributor From Manufacturer. Must Submit Certificate Of Distributorship. C. Bidder Must Have A Pcab License. D. Bidder Must Have An Experience Of Having Completed At Least Three (3) Contracts That Is Similar To The Contract To Be Bid. (indicate In The Form Of Statement Of All On-going Government & Private Contracts Including Contract Awarded But Not Yet Started.) E. Bidder Must Have Been In The Business For At Least Five (5) Years Of Providing Scada System Solution And Services In Government Or Private Sectors. Must Submit Dti Or Sec Registration. C. Additional Requirements (compliance Upon Delivery) 1. The Supplier’s Technical Representative Shall Be Present During Installation And Commissioning For Final Testing. 2. Must Submit Comprehensive Documentation, Including But Not Limited To Operation Manuals, Datasheets, And Manufacturers’ Certificates For All Electrical And Mechanical Components. 3. Trainings/transfer Of Technology: The Winning Bidder Shall Provide Inhouse Training On The Following Working Subject Matters: A. Plc And Scada Software Programming B. Installation C. Configuration D. Calibration E. Troubleshooting/operations And Maintenance All Associated Costs, Including Transportation, Accommodation, Allowances, And Other Incidental Expenses, Shall Be Covered By The Supplier.

Details: This Is Not A Request For Proposal. This Is A Request For Standard Form (sf) 330 Architect-engineer Qualifications Packages Only. All Information Needed To Submit Sf 330 Documents Is Contained Herein. No Solicitation Package, Technical Information, Or Bidder/plan Holder List Will Be Issued. The Government Will Not Pay, Nor Reimburse, Any Costs Associated With Responding To This Request. The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. 1. General Information Veterans Health Administration (vha) Program Contracting Activity Central (pcac) Is Seeking Sources And Intends To Award A Firm Fixed Price Design Contract For Architect-engineering (a-e) Services For The Development Of Complete Construction Documents, Which Include Working Drawings, Specifications, And Reports, And Construction Period Services For Project #676-336 Fire Station Design-tomah Va Medical Center. The A-e Services Contract That Is Anticipated To Be Awarded Will Be Procured In Accordance With The Selection Of Architects And Engineers Statute [formerly Known As The Brooks Architect Engineer Act], Federal Acquisition Regulation (far) Subpart 36.6 Architectural And Engineering Services, Va Acquisition Regulation (vaar) 836.6, And Va Acquisition Manual (vaam) M836.6 Architect-engineer Services. In Accordance With Far 36.209, Construction Contracts With Architect-engineer Firms, No Contract For The Construction Of A Project Shall Be Awarded To The Firm That Designed The Project Or Its Subsidiaries Or Affiliates, Except With The Approval Of The Head Of The Agency Or Authorized Representative. 2. Project Information This Project Is A 100% Set-aside For Service-disabled Veteran-owned Small Business (sdvosb) Concerns. The Naics Code For This Procurement Is 541330 Engineering Services And The Annual Small Business Size Standard Is $25.5m. A Full Design Team Is Required To Complete This Project. The Va Expects To Award The Anticipated A-e Contract By Late March 2025. The Anticipated Period Of Performance For Completion Of Design Is 160 Calendar Days After Notice Of Award (noa). The Vaar Magnitude Of Construction Is Between $5,000,000 And $10,000,000. Please Note That The 160-calendar-day Period Of Performance For The Design Completion Begins With The Issuance Of The Noa And That A Notice To Proceed (ntp) Will Not Be Issued For The Completion Of A Design Project. 3. A-e Selection Process Firms Submitting Sf 330s In Response To This Announcement, Not Later Than The Closing Date And Time Specified Herein And In Accordance With Submission Requirements, Will Be Considered For Evaluation. The Selection Will Be Made As Follows: Sf 330s Will Be Evaluated In Accordance With The Primary Selection Criteria As Stated In This Pre-solicitation Notice. These Evaluations Will Determine The Most Highly Qualified Firms For This Particular Requirement. In Accordance With Far 36.602-3(c), At Least Three Of The Most Highly Qualified Firms Will Then Be Notified Of The Government S Intent To Hold Discussions. All Firms Not Invited To Participate In Discussions Will Be Notified At This Time. In Accordance With Far 36.607(b), Any Requested Debriefings Of Successful And Unsuccessful Firms Will Be Held After Final Selection Has Taken Place And Will Be Conducted, To The Extent Practicable, In Accordance With 15.503, 15.506(b) Through (f), And 15.507(c). Note That 15.506(d)(2) Through (d)(5) Do Not Apply To Architect-engineer Contracts. Discussions Will Be Held With The Most Highly Qualified Firms In The Form Of Written Responses. The Firms Invited To Participate In Discussions Will Be Notified By Email And Provided Further Instructions, Including Any Questions Or Topics To Address. Following The Completion Of Discussions, The Firms Will Be Evaluated And Ranked Based On The Primary And (if Necessary) Secondary Selection Criteria. The Final Evaluation And Ranking Will Consider The Sf 330 Submission For Each Firm, As Well As Additional Information Obtained Via Discussions. The Highest Rated Firm Will Be Selected To Receive The Solicitation And Engage In Negotiations. The Solicitation Will Be Issued To The Highest Rated Firm As A Request For Fee Proposal (rfp). All Sow Attachments And Site-specific Documentation Will Be Provided To The Highest Rated Firm With The Rfp. A Site Visit Will Be Authorized During The Negotiation Process. An Award Will Then Be Made As Long As The Negotiation Of Rates And Hours Leads To A Fair And Reasonable Determination Of The Final Contract Price. If Negotiations With The Highest Rated Firm Are Unsuccessful, The Firm Will Be Notified That Negotiations Have Been Terminated. Negotiations Will Then Be Initiated With The Next Highest Rated Firm, And So On Until Award Can Be Made. 4. Selection Criteria: Firms Responding To This Notice Will Be Evaluated And Ranked Using The Primary And Secondary Selection Criteria Listed Below. The Factors Are Listed In Descending Order Of Importance. The Evaluation Will Consider How Each Factor Is Addressed And How It Is Formatted To Coincide With The Selection Criteria. Primary Selection Criteria: Professional Qualifications: Professional Qualifications Necessary For Satisfactory Performance Of Required Service. The A-e Shall Demonstrate They Are Able To Sign And Stamp Each Drawing By Individuals Licensed In Any State In The United States For The Key Positions Listed Below. Provide Professional License Numbers And/or Proof Of Licensure. The Evaluation Shall Consider The Specific Experience (minimum Of Five Years) And Qualifications (i.e., Education, Training, Registration, Certifications, Overall Relevant Experience, And Longevity With The Firm As Full-time Employees) Of Personnel Proposed For Assignment To The Project. The Lead Designer In Each Discipline Must Be Registered But Does Not Have To Be Registered In The Particular State Where The Project Is Located. Disciplines Requiring A Florida License Include Civil/structural And Hazardous Material Abatement/industrial Hygiene. A Resume For Each Of These Key Positions Must Be Provided In Section E Of The Sf330. Key Positions And Disciplines Required For This Project Include, But Are Not Limited To: Architect (leed Certification/us Green Build Council Certification) Cost Estimator Civil Engineer Electrical Engineer Environmental Engineer Fire Protection Engineer Mechanical Engineer Plumbing Engineer Project Manager Quality Assurance Manager Structural Engineer Physical Security Specialists Commissioning Agent Offeror Must Include The Following Statement Of Sdvosb Compliance When Submitting The Personnel Proposed To Perform The Work Under This Requirement: I, [signatory Authority], Of [company Name], Certify That The Sdvosb Prime Contractor Will Not Pay More Than 50% Of The Amount Paid By The Government To The Prime For Contract Performance To Firms That Are Not Certified Sdvosbs Listed In The Sba Certification Database In Compliance With Vaar 852.219-73. The Information Provided In Sections C Through E Of The Sf 330 Will Be Used To Evaluate This Factor. Do Not Include This Information In Section H Unless It Is Pertinent To Support The Information Listed In The Other Sections. Specialized Experience And Technical Competence: Specialized Experience And Technical Competence In The Design And Construction Period Services Shall Be Provided For Network Infrastructure Installation, Renovations, Or Upgrades. Projects Experience Should Include Upgrading Large Scale (multi-building With Multiple Generational Oit Systems) Fiber Optics, Data Cable, Structured Cabling, Electrical Distribution Design, Electrical Upgrades, Uninterruptable Power Systems (ups), Electrical Bonding, Building Management Systems/building Automation Systems (bms/bas), Hvac, It Room Renovations/expansion/relocations, Data Centers/server Rooms Reconfiguration, And Physical Security Upgrades, Duct Bank And Direct Boring Operations. Other Specialized Experience To Provide Should Include Experience In Critical Path Scheduling, Fire Protection, Construction Infection Control Protocols, Energy Conservation, Transition, And Sustainable Design Practices. Submissions Shall Include No More And No Less Than Five (5) Recent And Relevant Government And Private Experience Projects Similar In Size, Scope, And Complexity, And Experience With The Type Of Projects/competence Above. Relevant Is Defined As Those Task Requirements Identified In The Statement Of Work. Recent Is Defined As Services Provided Within The Past Five (5) Years. Include The Following For Each Submitted Project: Project Title And Location Detailed Narrative Describing The Scope Of Services Provided, Including The Type Of Work Performed By The Offeror And Its Role In The Project (i.e., Prime Contractor, Teaming Partner, Or Subcontractor) Project Owner, Owner S Point Of Contact Including Telephone Number And Email Address. Services & Deliverables Provided Under The Contract/task Order. Period Of Performance, Including Start And Completion Dates Total Dollar Value Of The Project Ae Cost Estimate Vs. Actual Construction Cost Contract Number Associated With The Project. The Information Provided In Section F Of The Sf 330 Will Be Used To Evaluate Relevant Specialized Experience And Technical Competence. Any Projects Submitted By An Offeror That Exceed The Limit Will Not Be Considered During The Evaluation. The Information Provided In Section G Of The Sf 330 Will Be Used To Evaluate The Prior Experience Of The Prime Firm And Any Key Subcontractors Working Together On The Provided Relevant Projects. The Offeror Must Include Narratives Of How The Firm Addresses Each Of The Following Topics In Section H. Simply Restating This List In Section H Will Not Be Sufficient. The Management Approaches. The Coordination Of Disciplines And Subcontractors Quality Control Procedures, And Familiarity With Va Design Guides/manuals, Master Specifications, And Other Applicable Standards. Capacity: The Evaluation Will Consider The Firm S Ability To Meet The Schedule Of The Overall Project, As Well As The Available Capacity Of Key Disciplines To Perform The Work In The Required Time. Provide The Available Capacity Of Key Disciplines By Providing Current Project Workload, Inclusive Of All Projects Awarded By The Va, Any Federal Agency, And Private Sector, During The Previous Twelve (12) Months Or Any Active Projects At Pcac. Include The Full Potential Value Of Any Current Indefinite Delivery Contracts The Prime Firm Has Been Awarded From Any Source. Offeror Shall Clearly State Their Available Capacity Presenting Workload Percentages For The Key Disciplines And/or Team Members. Also, The Offeror Must Provide The Award Date, Completion Percentages, And Expected Completion Date For The Va Projects Awarded In The Previous Twelve (12) Months Or Active At Pcac. The Information For This Factor Must Be Provided In Section H Of The Sf 330. Please Ensure The Capacity Applies Toward The Proposed Team/personnel Provided In The Sf 330. Past Performance: Past Performance Will Be Evaluated On Contracts With Government Agencies And Private Industry In Terms Of Cost Control, Quality Of Work, And Compliance With Performance Schedules. Past Performance Will Be Evaluated For All Projects Provided In Section F. The Contractor Performance Assessment Reporting System (cpars) Database Will Be Reviewed To Evaluate The Projects That Have A Va Cpars Entry. Va Cpars Are Not Required To Be Submitted With The Sf330 Submission. The Contract Number For The Project Must Be Submitted For Each Project Provided In Section F So Cpars Can Be Reviewed In The Database. Please Note We Are Unable To Review Any Cpars From Other Federal Agencies Outside Of The Va. For Any Project That Does Not Have Va Cpars Data Available, A Past Performance Questionnaire (ppq) Is Required To Be Submitted With The Sf330. If The Firm (prime Or Subcontractor) Was Not The Prime Contractor On Any Project Submitted In The Sf330, A Ppq Must Be Submitted Listing Their Specific Role (key Disciplines) As A Subcontractor. The Ppq Should Be Rated And Signed By The Evaluator. In The Event That A Firm Does Not Receive A Completed Ppq Requested From An Evaluator Prior To The Time For Submission, The Firm Shall Submit The Partially Completed Ppq With Section 1 And The Evaluator Information In Section 2 Completed. Ensure A Poc Is Listed With The Project Title/contract Number. The Va Will Make Reasonable Attempts To Contact The Poc Upon Submission For Ppq Completion. The Government May Consider Additional Performance Related Information Regarding The Firm, To Include Customer Inquiries, Government Databases, Publicly Available Sources, And Additional Projects In Cpars. The Government Reserves The Right To Contact Any Poc Listed On A Cpars Report Or Ppq. If Appropriate, The Record Of Significant Claims Against The Firm Because Of Improper Or Incomplete Architectural And Engineering Services May Be Evaluated. Failure To Provide Requested Data, Accessible Points Of Contact, Or Valid Phone Numbers Will Result In A Firm Being Considered Less Qualified. The Information For This Factor Must Be Provided In Section H Of The Sf 330. For Ppqs, Please Utilize The Attached Ppq Document. Completed Ppqs Should Be Incorporated Into The Sf 330. Ppqs Should Not Be Submitted To Vha Pcac Directly. Any Ppqs Will Not Be Counted Towards The Page Limitation For This Submission. However, Any Narratives Provided For Past Performance In Section H Will Be Counted Toward The Page Limit. Knowledge Of Locality: Demonstrate And Describe Experience In The Local Area And The Specific Knowledge Of Certain Local Conditions Or Project Site Features The Experience Provided. This Description May Include (if Applicable): Any Prime Firm Or Subcontractor Experience Within The Visn Or At The Vamc State Or Local Construction Codes, Laws, Or Regulations Climate And Seismic Related Conditions Or Features The Information For This Factor Must Be Provided In Section H Of The Sf 330. Note That The Intent Of This Factor Is To Showcase A Firm S Understanding Of The Site And Locality, And Not Where The Firm Is Located, How Far Away The Firm/branch Office Is From The Site, And How They Would Travel To The Site. Information Related To The Firm S Location Shall Instead Be Provided In Section H Under Secondary Selection Criterion Factor 1, Geographic Location. See Below. Experience In Construction Period Services: Experience In Construction Period Services Must Be Demonstrated Via Project Experience. These May Be The Same Projects Identified Above In Factor 1; However, The Firm Shall Clearly Delineate The Types Of Construction Period Services Performed For Each. Refer To The Statement Of Work For Review Timeline Expectations. Project Descriptions Must Include Experience With: Solicitation Support Services, Professional Field Inspections During The Construction Period Coordination With Commissioning Requirements Review Of Construction Submittals Support In Answering Requests For Information During The Construction Period. Support Of Construction Contract Changes To Include Drafting Statements Of Work And Cost Estimates. Attendance At Weekly Conference Calls Providing Minutes Of Meetings Between The Ae, Va, And Contractors Pre-final Inspection Site Visits Generation Of Punch-list Reports, And Production Of As-built Documentation. The Firm Shall Provide A Detailed Description Of Projects Worked That Illustrate Experience In These Areas. Projects Must Be Within The Last Ten (10) Years. In Addition, The Firm Must Include A Description Of Experience Addressing Unforeseen Conditions And Emergent Situations, Conducting Situation Evaluations, And Making Midcourse Corrections. Include Description On How The Firm Can Be Proactive Or Responsive In These Situations. The Information For This Factor Must Be Provided In Section H Of The Sf 330. Secondary Selection Criterion*: Geographic Location. Location Of The Firm, As Measured By The Driving Distance (miles) Between The Offeror S Principal Business Location And The Tomah Va Medical Center 500 E Veterans Street, Tomah, Wi. 54660. . Determination Of The Mileage Will Be Based On Google Maps (https://www.google.com/maps/dir/). *the Secondary Selection Criterion Is Used As A Tiebreaker, If Necessary, In Ranking The Most Highly Qualified Firms Following The Completion Of Discussions. The Secondary Selection Criterion Will Not Be Applied When Determining A Firm S Sf 330 Submission Highly Qualified Or Not Highly Qualified. 5. Submission Requirements: The Below Information Contains The Instructions And Format That Must Be Followed For The Submission Of The Sf 330 Statement Of Qualifications: Submit One (1) Sf 330 Statement Of Qualifications To Contract Specialist Johnna Mcgraw At Johnna.mcgraw@va.gov . This Must Include Parts I And Ii And Any Applicable Attachments. The Submission Must Include The Sf 330, Architect-engineer Qualifications (form Is Available Online At Https://www.gsa.gov/reference/forms/architectengineer-qualifications). The Sf 330 Submission Is Due By January 10th 2025 At 1pm Est. The Sf 330 Must Be Submitted In One Email And Have A File Size No Larger Than 5 Mb. No Hard Copies Will Be Accepted. The Subject Line Of The Email Must Read: Sf 330 Submission Fire Station Design- Tomah Wi. The Sf 330 Submission Must Not Exceed A Total Of 50 Pages. This Includes Title Page, Table Of Contents, And Any Other Relevant Information. Any Pages Submitted By An Offeror That Exceed The Limit Will Not Be Considered During The Evaluation. Each Page Must Be In Arial Size 12 Font, Single Spaced. Part Ii Of The Sf 330 And Any Cpars Or Ppqs Will Not Count Toward The Page Limitation. A Ppq Obtained For Another Sf 330 Submission May Be Submitted For This Project. However, If Significant Portions Of The Project Have Been Completed Since The Ppq Was Filled Out, A New Ppq Should Be Submitted To Accurately Assess The Project. Firms Must Include The Following Information In Section B Of The Sf 330 Submission: 1) Sam Unique Entity Identifier 2) Tax Id Number 3) Cage Code 4) Primary Point Of Contact S Email Address And Phone Number. All Questions Must Be Submitted To Johnna Mcgraw With The Subject Line Sf 330 Questions Fire Station Design-tomah Wi. The Cutoff For Question Submission Is 1:00 Pm Est On December 16th, 2024. Questions Will Be Answered Through Modification To The Pre-sol Notice Posted To Contract Opportunities At Sam.gov. This Procurement Is A 100% Set-aside For Sdvosb Concerns. Offers Received From Other Than Sdvosbs Will Not Be Considered. Offerors Must Be Certified As Sdvosbs By The U.s. Small Business Administration (sba) And Visible In The Veteran Small Business Certification (vetcert) Database (https://veterans.certify.sba.gov/) At The Time Of Sf 330 Submission, Written Response Submission, And Award. Failure To Be Certified In The Vetcert Database At These Times Will Result In The Offeror Being Deemed Ineligible For Award. All Joint Ventures Must Be Sba Certified At The Time Of Sf 330 Submission, Written Response Submission, And Award And Must Submit Agreements That Comply With 13 Cfr 128.402 Prior To Contract Award. All Prime Firms Must Meet The Naics Code Requirement Specified In This Notice. The Contracting Officer Will Verify The Naics Code In Vetcert. Failure To Meet The Naics Code Requirement May Result In The Rejection Of The Sf 330 Submission. Sf 330 Submissions Received After The Date And Time Specified Will Not Be Considered. Late Proposal Rules Per Far 15.208 Will Be Followed For Late Submittals. Firms Not Providing The Required Information May Not Be Evaluated. All Information Must Be Included In The Sf 330 Submission Package. It Is The Offeror S Responsibility To Check The Contract Opportunities Website At Sam.gov For Any Revisions To This Announcement Prior To Submitting Their Sf 330.

Details: Sources Sought sources Sought Notice this Sources Sought Notice Is For Informational And Planning Purposes Only And Shall Not Be Construed As A Solicitation Or As An Obligation Or Commitment By The Government. This Notice Is Intended Strictly For Market Research. This Is A Sources Sought Request Only. This Is Not A Solicitation For Proposals, Proposal Abstracts, Or Quotations. the Department Of Veterans Affairs Visn 10 Network Contracting Office 10, Serving Indiana, Michigan, And Ohio Va Medical Centers, Is Conducting A Market Survey To Help Determine The Availability And Technical Capability Of Qualified Service-disabled Veteran-owned Small Businesses, Veteran-owned Small Businesses, Small Businesses, And/or Hubzone Small Businesses Capable Of Serving The Needs Identified Below. This Sources Sought Notice Is For Open Market As Well As Federal Supply Schedule Services. the Purpose Of This Notice Is To Gain Knowledge Of Potential Qualified Sources And Their Size Classification/socioeconomic Status (service-disabled Veteran Owned Small Business, Veteran Owned Small Business, Women Owned Small Business, Hub Zone, 8(a), Small Business, Or Large Business), Relative To Naics 621320. Responses To This Notice Will Be Used By The Government To Make Appropriate Acquisition Decisions. A Solicitation Is Not Currently Available. If A Solicitation Is Issued, It Will Be Announced On The System For Award Management (sam) Federal Business Opportunities Website Https://sam.gov/content/home At A Later Date, And All Interested Parties Must Respond To That Solicitation Announcement Separately From The Responses To This Announcement. your Responses To The Information Requested Will Assist The Government In Determining The Appropriate Acquisition Method, Including Whether A Set-aside Is Possible. please Note That This Is Not A Request For Proposal; No Solicitation Exists At This Time. project Requirments: background the Visn 10 Va Medical Facilities Have A Need To Purchase Nonpersonal Services To Provide Optical Dispensing For The Va Medical Centers (vamc), Community Based Outpatient Clinics (cbocs), And Other Clinics Located Through The State Of Ohio And Its Surrounding States. the Visn 10 Va Medical Facilities Are Seeking To Procure Optical Dispensing Services That Can Meet Or Exceed Our Required Specifications. As A Result Of This Sources Sought And Market Research, A Solicitation Will Be Publicly Posted To Sam.gov As Well As Sent To Interested Vendors Regarding This Requirement. The Goal Of This Sources Sought Is To Establish If There May Be Any Small Business Vendors That Can Satisfy This Requirement. Please Advise If You Can Provide The Service. Please Submit All Information To Contract Specialist Thomas Bellamy Via E-mail At Thomas.bellamy@va.gov No Later Than 3:00 P.m. Eastern Daylight Time On Tuesday, January 28, 2025. anticipated Period Of Performance: March 26, 2025, Through March 25, 2026, With One (1) Option Year. the Intended Delivery Period Is To Be Determined. confidentiality Of Information in Accordance With Far 52.227-14(b), The Contractor Shall Guarantee Strict Confidentiality Of The Information/data That It Is Provided By The Government During The Performance Of The Contract. The Government Has Determined That The Information/data That The Contractor Will Be Provided During The Performance Of The Contract Is Of A Sensitive Nature And Cannot Be Disclosed In Any Manner. the Contractor, In Whole Or In Part, Can Only Make Disclosure Of The Information/data, After The Contractor Receives Prior Written Approval From The Contracting Officer. Whenever The Contractor Is Uncertain With Regard To The Proper Handling Of Information/data Under The Contract, The Contractor Shall Obtain A Written Determination From The Contracting Officer. interested Firms Responding To This Sources Sought Notice Must Adhere To The Following: (a) Provide A Capability Statement Demonstrating Relevant Experience, Skills, And Ability To Fulfill The Government's Requirements For The Above. The Capability Statement Should Contain Sufficient Detail For The Government To Make An Informed Decision Regarding Your Capabilities; However, The Statement Should Not Exceed 10 Pages. (b) The Capability Statement Must Identify The Responder's Business Type And Size. (c) The Capability Statement Must Provide Company Name And Address, Point Of Contact, Phone/fax/email And Naics Code(s). (d) All Capability Statements Must Be Submitted To Contract Specialist Thomas Bellamy Via E-mail At Thomas.bellamy@va.gov No Later Than 3:00 P.m. Eastern Daylight Time On Tuesday, January 28, 2025. this Notice Is Not A Request For Proposals. This Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. The Government Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. Any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization S Qualifications To Perform The Work. Respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. After A Review Of The Responses Received, A Pre-solicitation Synopsis And Solicitation May Be Published In Sam. However, Responses To This Notice Will Not Be Considered Adequate Responses To A Solicitation. confidentiality: No Proprietary, Classified, Confidential, Or Sensitive Information Should Be Included In Your Response. The Government Reserves The Right To Use Any Non-proprietary Technical Information In Any Resultant Solicitation(s). a Determination By The Government To Proceed With The Acquisition As A Set-aside Is Within The Discretion Of The Government. If Capability Statements Are Not Received From At Least Two Responsible Businesses By The Response Date Or If The Government Determines That No Small Business Concerns Are Capable Of Performing This Requirement Based Upon An Evaluation Of The Capability Statements Submitted, The Government May Proceed With A Full And Open Competition. ohio Optical Dispensing Services part 1 general Information general: this Is A Nonpersonal Services Contract To Provide Optical Dispensing Services For The Va Medical Centers (vamcs), Community Based Outpatient Clinics (cbocs), And Other Clinics Located Through The State Of Ohio And Its Surrounding States. The Government Shall Not Exercise Any Supervision Or Control Over The Personnel Performing The Services Described Herein. Such Personnel Shall Be Accountable Solely To The Contractor Who, In Turn, Is Responsible To The Government. description Of Services/introduction: the Contractor Shall Provide All Personnel, Equipment, Supplies, Off-site Facilities, Transportation, Tools, Materials, Supervision, And Other Items And Nonpersonal Services Necessary To Fitting, Ordering, Adjusting, Conducting Minor Repairs, And Education For Dispensing Eyeglasses To Veterans In The Ohio Va Service Area, As Defined In This Performance Work Statement (pws), Except For Those Items Specified As Government-furnished Property And Services. The Government Will Provide Spaces For Performance, And Others Will Be Furnished By The Contractor (within 10 Miles And No Greater Than A 20-minute Drive From The Servicing Va Facility Address). background: the Veterans Integrated Service Network (visn) 10 Prosthetics Program Fabricates Eyeglasses For The Visn 10 Vamcs And Their Supporting Cbocs And Clinics. While The Eyeglasses Are Manufactured At The Visn 10/12 Optical Lab, Visn 10 Requires On-site Dispensing Services Or, Where There Is A Lack Of Clinic Space, Requires Off-site Dispensing Services. These Dispensaries Will Serve Various Functions. The Contractor Shall Provide All Labor, Equipment, Materials, Supplies, And Supervision Necessary For Eyeglass Dispensary Services, To Include Functions Such As Fitting, Ordering, Adjusting, Dispensing, Repairing (minor), And Education Of Veterans. 1.3 Scope Summary: the Government Intends To Enter Into One (or More) Indefinite Delivery Indefinite Quantity Contract(s) That Clearly Outline The Contractor S Obligations Regarding Ordering And Dispensing Eyewear To Veterans Within The Framework Of Established Va Guidelines And Practices. visn 10 Anticipates Awarding One (1) (or More) Firm-fixed Price Contract(s). The Awarded Contract(s) Will Contain One (1) Base Period And Two (2) Option Periods (see Price Schedule For Performance Periods). the Sites Covered By This Requirement Shall Include Vamcs, Cbocs, And Clinics, As Detailed In Section 1.5.5 Below. 1.4 Period Of Performance: to Be Determined. 1.5 General Information: 1.5.1 Quality Control: the Contractor Shall Develop And Maintain An Effective Performance Monitoring Plan To Ensure Services Are Performed In Accordance With This Pws. The Contractor Shall Develop And Implement Procedures To Identify, Prevent, And Ensure Non-recurrence Of Defective Services. 1.5.2 Quality Assurance: the Government Shall Evaluate The Contractor S Performance Under This Contract In Accordance With The Quality Assurance Surveillance Plan (qasp). This Plan Is Primarily Focused On What The Government Must Do To Ensure That The Contractor Has Performed In Accordance With The Performance Standards. It Defines How The Performance Standards Will Be Applied, The Frequency Of Surveillance, And The Minimum Acceptable Defect Rates. 1.5.3 Recognized Holidays: new Year S Day Labor Day martin Luther King Jr. S Birthday Columbus Day president S Day Veteran S Day memorial Day Thanksgiving Day juneteenth Independence Day Christmas Day independence Day **and Any Other Day Declared By The President Of The United States As A Federal Holiday** 1.5.4 Hours Of Operation: the Schedule Of Days And Hours Of Operation Shall Be Mutually Agreed Upon Between Contractor And Government. Section 4.0.3 Of This Pws Establishes The Minimum Number Of Days Of Operation Per Week At Each Location; The Contractor Shall Provide These Services On Weekdays. On The Days The Contractor Provides Optician Services, Said Services Shall Be Available During The Same Hours The Site (i.e., Vamc, Cboc, Or Clinic) Is In Operation Or Open For Appointments. For Those Sites Where Optician Services Are Provided Five Days Per Week, Monday Through Friday, If The Contracting Officer S Representative (cor) Determines The Volume Of Optical Orders Warrants Additional Coverage, The Contractor Shall Be Responsible For Providing Optician Services On Saturdays As Well. For Locations That Are Open Fewer Than Five Days Per Week, The Contractor Shall Establish Consistent Days And Hours Of Operation. Additionally, During The Weekdays In Which An Optician Is Not On-site, The Contractor Shall Make An Alternative Ordering Location Available To Veterans. The Contractor Is Not Responsible For Conducting Business On The Recognized Holidays Listed In Section 1.5.3, Or When The Government Facility Is Closed Due To Local Or National Emergencies, Administrative Closures, Or Similar Government-directed Facility Closures Or Moves. The Contractor Must At All Times Maintain An Adequate Workforce For The Uninterrupted Performance Of All Tasks Defined Within This Pws When The Government Facility Is Not Closed For The Reasons Discussed In This Section. An Adequate Workforce Includes Operating Hours As Well As Staffing Levels To Support Workload Demand. When Hiring Personnel, The Contractor Shall Keep In Mind That The Stability And Continuity Of The Workforce Are Essential To Successful Performance. 1.5.5 Place Of Performance: the Work To Be Performed Under This Contract Will Be Performed At/nearby*: chillicothe Vamc 17273 State Route 104, Chillicothe, Oh 45601 athens Cboc 510 West Union Street, Athens, Oh 45701 cambridge Cboc 2146 Southgate Pkwy., Cambridge, Oh 43725 lancaster Cboc 1550 Sheridan Drive, Suite 100, Lancaster, Oh 43130 portsmouth Cboc 840 Gallia Street, Portsmouth, Oh 45662 marietta Cboc 418 Colgate Drive, Marietta, Oh 45750 wilmington Outreach Clinic 448 West Main Street, Wilmington, Oh 45177 â  â  cincinnati Vamc 2929 Highland Avenue, Cincinnati, Oh 45220 bellevue Cboc 103 Landmark Drive, Suite 300, Bellevue, Ky 41073 florence Cboc 7310 Turfway Road, Suite 540, Florence, Ky 41042 hamilton Cboc 1755-c South Eire Highway, Hamilton, Oh 45011 lawrenceburg Cboc 1600 Flossie Drive, Greendale, In 47025 clermont County Cboc 4600 Beechwood Road, Cincinnati, Oh 45244 georgetown Cboc 474 Home Street, Georgetown, Oh 45121 â  â  louis Stokes Cleveland Vamc 10701 E. Boulevard, Cleveland, Oh 44106 akron Cboc 55 W. Waterloo, Akron, Oh 44319 canton Cboc 733 Market Avenue South, Canton, Oh 44702 new Philadelphia Cboc 1260 Monroe Avenue - Suite 1a, New Philadelphia, Oh 44663 lake County Va Cboc 35000 Kaiser Court, Willoughby, Oh 44094 east Liverpool/calcutta Cboc 15655 State Route 170 - Suite A, Calcutta, Oh 43920 lorain Cboc 5275 North Abbe Road, Elyria, Oh 44035 sandusky Cboc 1912 Hayes Avenue, Sandusky, Oh 44870 mansfield Cboc 1025 South Trimble Road, Mansfield, Oh 44906 youngstown Cboc 1815 Belmont Avenue, Youngstown, Oh 44505 parma Cboc 8787 Brookpark Road, Parma, Oh 44141 ravenna Cboc 6751 N. Chestnut St, Ravenna, Oh 44266 warren Cboc 1460 Tod Ave Nw, Warren, Oh 44485 chalmers P. Wylie Ambulatory Care Center (acc) 420 N. James Road, Columbus, Oh 43219 newark Cboc 1855 W. Main Street, Newark, Oh 43055 grove City Cboc 5775 N. Meadows Drive, Grove City, Oh 43123 zanesville Cboc 2800 Maple Avenue, Zanesville, Oh 43701 marion Cboc 1203 Delaware Avenue, Marion, Oh 43224 â  dayton Vamc 4100 W. Third Street, Dayton, Oh 45428 lima Cboc 1303 Bellefontaine Avenue, Lima, Oh 45804 richmond Cboc 1010 N. J Street, Richmond, In 47374 springfield Cboc 512 South Burnett Road, Springfield, Oh 45505 middletown Cboc 4337 North Union Road, Middletown, Oh 45005 *these Locations May Change Throughout The Life Of The Contract As The Needs Of The Va Change. This Contract Covers Any Site Moves Or Government-furnished Space Changes Deemed Fair And Reasonable By The Administrative Contracting Officer (co). 1.5.6 Type Of Contract: the Government Intends To Award One (or More) Indefinite Delivery Indefinite Quantity Contract(s). 1.5.7 Security Requirement And Background Checks: the Contractor Shall Be Given Beneficiary Information That May Include The Veteran S Name, Residential Address, Telephone Number, And Social Security Number. Beneficiary Information Is Confidential And Is Protected Under The Privacy Act Of 1974 And The Healthcare Insurance Portability And Accountability Act Of 1996 (hipaa). Any Individual Making Unauthorized Disclosures May Be Criminally Liable For Violations Under The Acts. The Contractor Shall Not Use Or Further Disclose Beneficiary Information In A Manner That Would Violate The Federal Privacy And Confidentiality Statutes. The Contractor Shall Receive Privacy Training Before Performance Begins On This Contract And Annually Thereafter Through The Va S Training Management System (tms). Completion Certificates Shall Be Faxed To The Cor. Any Electronic Communication That Includes Hipaa Information Shall Be Done Through Pki Encrypted E-mail. once Tms Training Is Completed And Training Certificates For The Required Information Security And Privacy Training Courses Are Provided To The Cor, And The Visn 10 Unified Access Request Form Has Been Submitted By The Cor, The Contractor May Be Granted Access To The Veterans Health Information System Technology Architecture (vista) And/or Previous Prescription Data Needed For Prescriptions, Troubleshooting Fitting, Etc. The Appropriate Access Is Determined By The Cor. the Contractor Shall Maintain Positive Control Over Any Government-issued Items, Including But Not Limited To The Following: keys government Computers sample Eyeglass Frames fax Machines (where Applicable) all Items And Government Areas Shall Be Secured When Not In Use. 1.5.8 Special Qualifications: vendor Will Be Qualified To Educate And Assist The Veterans In The Proper Choice, Use, And Care Of Their Eyewear. In Addition To Frame Selection, The Vendor Will Be Responsible For All Measurements And Fitting Of Eyewear. Appropriate State Licensure/certifications Will Be Required If Deemed Necessary By The State Where The Vamc, Cboc, Or Clinic Is Located. Vendor Shall Provide Appropriate Professional Business License(s) Within The State Or States Required Per Each Facility Serviced. Vendor Shall Also Comply With Any Other Federal, State, And Local Law Applicable To The Industry. 1.5.9 Post Award Conference/periodic Progress Meetings: the Contractor Agrees To Attend Any Post Award Conference Convened By The Contracting Activity, In Accordance With Federal Acquisition Regulation Subpart 42.5. The Co, Cor, And Other Government Personnel, As Appropriate, May Meet Periodically With The Contractor To Review The Contractor's Performance. At These Meetings, The Co Will Apprise The Contractor Of How The Government Views The Contractor's Performance And The Contractor Will Apprise The Government Of Problems, If Any, Being Experienced. Appropriate Action Shall Be Taken To Resolve Outstanding Issues. These Meetings Shall Be Attended At No Additional Cost To The Government. 1.5.10 Contracting Officer S Representative (cor): the Cor Will Be Identified By Separate Letter. The Cor Monitors All Technical Aspects Of The Contract And Assists In Contract Administration. The Co Will Issue A Letter Of Delegation To The Cor And A Copy Will Be Provided To The Contractor. This Delegation Will State The Responsibilities And Limitations Of The Cor. The Cor Is Not Authorized To Change Any Of The Terms And Conditions Of The Contract. 1.5.11 Key Personnel: the Follow Personnel Are Considered Key Personnel By The Government: contracting Officer contracting Officer S Representative a Prosthetics And Sensory Aids Service (psas) Representative Will Be Located At Each Of The Vamc Facilities. The Contact Information For The Psas Representative Will Be Provided To The Contractor Upon Contract Award. A Psas Representative Has The Exclusive Responsibility For Determining Eligibility And Necessity For Va Prosthetic Goods And Services (e.g., Eyeglasses). The Psas Representative Also Coordinates And Resolves Problems Related To Such Goods And Services. Any Matter That Cannot Be Resolved By A Psas Representative Will Be Referred To The Cor. Any Matter Than Cannot Be Resolved By A Cor Will Be Referred To The Co. the Contractor Shall Provide A Contract Manager Who Shall Be Responsible For The Performance Of The Work. The Name Of This Person And An Alternate Who Shall Act For The Contractor When The Manager Is Absent Shall Be Designated In Writing To The Co. The Contract Manager Or Alternate Shall Have Full Authority To Act For The Contractor On All Contract Matters Relating To Daily Operation Of This Contract. The Contract Manager Or Alternate Shall Be Available During Regular Working Hours, Monday Through Friday (and Saturday, If Applicable At The Location) Except On The Recognized Holidays Listed In Section 1.5.3 Or When The Government Facility Is Closed Due To Local Or National Emergencies, Administrative Closures, Or Similar Government-directed Facility Closures Or Moves. 1.5.12 Identification Of Contractor Employees: all Contract Personnel Attending Meetings, Answering Government Telephones, And Working In Other Situations Where Their Contractor Status Is Not Obvious To Third Parties Are Required To Identify Themselves As Such To Avoid Creating An Impression In The Minds Of Members Of The Public That They Are Government Officials. They Must Also Ensure That All Documents Or Reports Produced By Contractors Are Suitably Marked As Contractor Products Or That Contractor Participation Is Appropriately Disclosed. All Contract Personnel Shall Wear Identification On The Outside Of Their Attire While Under Performance Under This Contract. The Identification Tag Shall Indicate That He Or She Is A Contractor And Include His Or Her First And Last Name. These May Be Either Government (contractor Personal Identity Verification) Or Contractor-issued Identification Tags. 1.5.13 Contractor Required Dress Code: all Employees Involved In The Performance Under This Contract Shall Dress In Accordance With The Policies Of The Vamc, Cboc, And/or Clinics At Which They Perform Under The Contract. part 2 definitions & Acronyms 2.0 Definitions And Acronyms 2.0.1 Definitions: acceptable Quality Level (aql). The Aql Expresses The Allowable Variation From The Standard That Will Result In An Acceptable Level Of Quality (100% Unless Otherwise Stated) That Is The Maximum Allowable Error Rate Or Variation From The Standard. contractor. A Supplier Or Vendor Awarded A Contract To Provide Specific Supplies Or Service To The Government. The Term Used In This Contract Refers To The Prime. contracting Officer. A Person With Authority To Enter Into, Administer, And/or Terminate Contracts, And Make Related Determinations And Findings On Behalf Of The Government. The Co Is The Only Individual Who Can Legally Bind The Government. contracting Officer S Representative (cor). An Employee Of The U.s. Government Appointed By The Co To Administer The Contract. Such Appointment Shall Be In Writing And Shall State The Scope Of Authority And Limitations. This Individual Has Authority To Provide Technical Direction To The Contractor As Long As That Direction Is Within The Scope Of The Contract, Does Not Constitute A Change, And Has No Funding Implications. This Individual Does Not Have Authority To Change The Terms And Conditions Of The Contract. dispensed: Prosthetic Devices Will Be Considered Dispensed When The Veteran Has Been Contacted For Pick-up Or The Device Has Been Mailed. If The Contractor Is Unable To Make Contact With The Veteran On The First Attempt, The Contractor Shall Make A Documented Second Attempt Within Five (5) Business Days. After Two Failed Attempts To Reach The Veteran Via Telephone, The Contractor Shall Send A Letter To The Veteran Informing Him Or Her The Eyeglasses Are Ready For Pickup. defective Service. A Service Output That Does Not Meet The Standard Of Performance Associated With The Performance Work Statement. key Personnel. Contractor Personnel That Are Evaluated In A Source Selection Process And That May Be Required To Be Used In The Performance Of A Contract By The Key Personnel Listed In The Pws. When Key Personnel Are Used As An Evaluation Factor In Best Value Procurement, An Offer Can Be Rejected If It Does Not Have A Firm Commitment From The Persons That Are Listed In The Proposal. quality Assurance. The Government Procedures To Verify That Services Being Performed By The Contractor Are Performed According To Acceptable Standards. quality Assurance Surveillance Plan (qasp). An Organized Written Document Specifying The Surveillance Methodology To Be Utilized By The Government For Surveillance Of Contractor Performance. quality Control. All Necessary Measures Taken By The Contractor To Assure That The Quality Of An End Product Or Service Shall Meet Contract Requirements. shipped. For Items Shipped Directly To Veterans By The Va, Items Will Be Considered Shipped When The Contractor Receives The Shipping Manifest From The Va. For Items Shipped Directly To Veterans By The Contractor (i.e., Upgraded Eyeglasses), Items Will Be Considered Shipped When The Items Are Mailed Via The Postal/package Carrier (e.g., United Parcel Service (ups), Fedex, Or United States Postal Service (usps)). subcontractor. One That Enters Into A Contract With A Prime Contractor. The Government Does Not Have Privity Of Contract With The Subcontractor. workday. The Number Of Hours Per Day The Contractor Provides Services In Accordance With The Contract. work Week. Monday Through Friday, Unless Otherwise Specified. 2.0.2 Acronyms/abbreviations: acc Ambulatory Care Center aql Acceptable Quality Level aus Acquisition And Utilization Specialist cboc Community Based Outpatient Clinic co Contracting Officer cor Contracting Officer S Representative hipaa Health Insurance Portability And Accountability Act Of 1996 psas Prosthetics And Sensory Aids Service pws Performance Work Statement qa Quality Assurance qasp Quality Assurance Surveillance Plan qc Quality Control roe Remote Order Entry tms Training Management System vamc Veterans Affairs Medical Center visn Veterans Integrated Service Network vista Veterans Health Information System Technology Architecture part 3 contractor-furnished Items And Services 3.0 Contractor-furnished Items And Responsibilities: 3.0.1 Services: the Contractor Shall: provide All Labor (complying With Service Contract Act Wage Determinations), Equipment, Materials, Supplies, And Supervision. ensure All Of The Vendor S Employees Possess The Appropriate State Licensure/certifications Deemed Necessary By The Applicable State Law. provide Documentation Showing Initial Employee Orientation And On-going Training, Which Demonstrates The Employee S Knowledge, Experience, And Competence Are Appropriate For His/her Assigned Responsibilities. The Vendor Shall Document Assessment Of Employee Competency. As A Part Of The Employee S Initial Orientation, The Vendor Shall Provide An Orientation On The Va And On The Requirements Of This Contract. Training Topics Shall Cover All Aspects Of The Services Provided Under This Contract, Including Patient Confidentiality, Patient Safety And Risk Assessment, Hipaa, Remote Order Entry (roe), Vista, Communicating Safe Use And Care Of Equipment To Patients And Caregivers, And Infection Control Procedures. The Vendor Assures All Personnel Comply With All Current And Future Va Requirements Such As Safety, Ethics, And Hipaa, Required Of Business Associates, Which May Also Include Tms Training Assignments. ensure A High Degree Of Professionalism And Understanding Are Demonstrated When The Vendor S Employees Interact With Patients. The Vendor S Employees Are Expected To Be Discreet And Tactful And Demonstrate Concern, Compassion, And Patience. Some Patients Have Physical Disabilities Or Chronic Illnesses That Influence Their Behavior And Lifestyle. Verbal Or Physical Abuse, Or Unprofessional Behavior Or Conduct Toward A Patient And/or Caregiver, Will Not Be Tolerated. The Va Reserves The Right To Request The Removal Of Any Employee From Performance Of Services Under This Contract If His/her Behavior And/or Level Of Services Provided Are Not In Strict Accordance With The Requirements Of This Contract. ensure Vendor S Employees Provide Superior Customer Service And Answer All Patient Or Va Staff Inquiries No Later Than 5:00 P.m. The Following Business Day. make Employee Records, Including But Not Limited To Training Documentation, Available For Review By The Cor. This Request May Be Made During Visits To The Vendor S Facility, Or The Vendor May Be Requested To Submit The Documentation To The Cor S Location. The Vendor Shall Provide A List To The Cor That Identifies Employee S Location And The Type Of Services He/she Provides. The Initial List Shall Be Submitted 10 Days Prior To Performance Beginning Under The Contract. allow The Government To Perform Unannounced Site Visits To Any Vendor Facilities Or Off-site Locations At The Government S Discretion. ensure Professional Business Certifications/licensure Within The State(s) Required Per Each Facility Serviced. All Applicable Documentation Shall Be Provided To The Cor Prior To Each Employee Initiating Work In Accordance With The Contract And Annually Thereafter. 3.0.2 Materials: unless Provided By The Government At A Government Facility, The Contractor Shall Provide The Following: Furniture; A Lensometer; And Basic Tools And Materials For Adjusting And Completing Simple Repairs (e.g., To Nose Pads Or Screws, And Adjustments) To Eyeglasses At All Dispensing Locations Appropriate To The Size Of The Location And Estimated Quantity Of Customers. The Contractor Is Responsible For Display Boards, Equipment, And Tools Required For The Display Of Frames. The Government Will Provide Fax Machine And/or Printers At All Government Facilities Where Required (including To Any Location Without Roe Capabilities). The Contractor Is Responsible For Providing Fax Machines And/or Printers At All Off-site Locations. 3.0.3 Facilities: the Contractor Will Be Responsible For Providing Spaces/facilities To Perform Under The Contract For The Following Locations (within 10 Miles And No Greater Than A 20-minute Drive From The Servicing Va Facility Address): main Vamc location chillicothe athens Oh chillicothe cambridge Oh chillicothe lancaster Oh chillicothe marietta Oh chillicothe portsmouth Oh cincinnati greendale In cincinnati florence Ky cincinnati bellevue Ky cincinnati clermont Oh cincinnati hamilton Oh cincinnati georgetown Oh cleveland new Philadelphia Oh cleveland sandusky Oh cleveland east Liverpool Oh cleveland warren Oh cleveland ravenna Oh cleveland lorain Oh cleveland mansfield Oh columbus newark Oh columbus grove City Oh columbus marion Oh columbus zanesville Oh dayton lima Oh dayton richmond In dayton springfield Oh dayton middletown Oh *these Locations May Change Throughout The Life Of The Contract As The Needs Of The Va Change. This Contract Covers Any Site Moves Or Government-furnished Space Changes Deemed Fair And Reasonable By The Administrative Contracting Officer. **if Adequate Off-site Location Coverage Is Not Available, Vendor Is Responsible For Working With Cor To Determine Space And Needs Required To Perform Services On-site At Va Location. part 4 government-furnished Items And Services 4.0 Government-furnished Items And Responsibilities: 4.0.1 Equipment: the Government Will Supply The Following Equipment For Use Under The Contract: government Computer For Each Location sample Eyeglass Frames For Each Location fax Machines (as Needed) 4.0.2 Materials: the Government Shall Supply The Following Materials For Use Under The Contract: frame Selection Kit For Each Location 4.0.3 Facilities: the Va Will Provide Space At The Following Locations. Each Government-provided Space Listed Below Will Include Lights, Telephone, Climate Control, Desk, Office Chair, Patient Chair, Adequate Storage, Computer, And Secured Area. location estimate Of Total Number Of Eyeglasses For Ordering Period # 1 (base Year) minimum Required Days Of Operation Per Week akron Cboc 2,587 5 Daysâ  canton Cboc 2,587 5 Daysâ  lorain Cboc 1,360 2 Daysâ  mansfield Cboc 1,587 2 Daysâ  parma Cboc 2,668 5 Daysâ  youngstown Cboc 2,342 5 Daysâ  vamc Chillicothe 7,901* 5 Daysâ  vamc Cincinnati 9,730* 5 Daysâ  vamc Cleveland 9,168* 5 Daysâ  vamc Columbus 13,188* 5 Daysâ  vamc Dayton 10,390* 5 Daysâ  lake County Cboc 1,639 5 Daysâ  grove City Cboc 907 2 Daysâ  total Estimate For Ordering Period # 1 (base Year) 66,054 *denotes Locations Where Off-site Volume Was Included In Estimates **these Locations And Days Of Operation Requirements May Change Throughout The Life Of The Contract As The Needs Of The Va Change. This Contract Covers Any Site Moves Or Government-furnished Space Changes Deemed Fair And Reasonable By The Administrative Contracting Officer. part 5 specific Tasks 5.0 Specific Tasks: 5.0.1 Specific Task # 1: the Contractor Shall Provide The Following Services When Fitting For Or Dispensing Eyeglasses: vendor Shall Fit The Veteran With The Proper Frame Style For The Veteran And His/her Prescription. vendor Shall Determine The Pupillary Distance, Segment Height, And/or Optical Center Height. vendor Shall Troubleshoot Any Optical Issues Before Sending The Veteran Back To The Eye Clinic. vendor Shall Fit And Adjust Glasses For The Veteran. vendor Shall Perform Minor Repairs On Glasses (i.e., Adjust Nose Pads And Screws And Make Other Minor Adjustments). vendor Shall Educate Veterans On The Advantages And Disadvantages Of Different Segment Styles. vendor Shall Only Use Va Sample Frames As Sample/trial Frames. Sample Frames Shall Not To Be Sold Or Issued To Veterans Or Used For Repairs. vendor Shall Wash/sanitize Hands And All Sample Frames And Surfaces Used Between Each Patient With Va-approved Sanitizer As Part Of Infection Control Requirements. vendor Shall Be Required To Obtain Access To The Va S Roe And Enter Prescription And Patient Measurements Into The System. Vendor Shall Ensure That All Information Needed To Fabricate The Eyewear Is Included In The Roe. vendor Shall Be Required To Maintain A High Level Of Accuracy When Entering Orders Into Roe. Frequent Optician Errors Shall Be Addressed By The Vendor And Additional Training Shall Be Documented. vendor Shall Use The Va S Roe Unless It Is Not Available. For Off-site Vendors, The Off-site Vendor Shall Fax Orders To An On-site Vendor Location For Order Entry. Every Faxed Order Shall Include A Cover Sheet, Location, And Account Number If Not Using The Roe System. in The Event Roe Is Not Operational, The Vendor Shall Fax Orders To The Visnâ 10/12 Optical Lab Only On A Contingency Basis And Only With The Approval Of The Visn 10 Acquisition And Utilization Specialist (aus) Program Manager And/or Cor. vendor Shall Be Required To Obtain Access To Vista And Add A Comment To Veteran S Electronic Consult Indicating When The Veteran Ordered Glasses. as The Va S Electronic Health Record Program, Cerner, Is Implemented At Care Sites, Vendor Shall Be Required To Undergo Required Training To Gain Appropriate Access And Knowledge Of The System. During Training, The Optical Shop Hours May Be Reduced In Order To Fulfill Requirements For Go-live. once The Cerner System Is Implemented, The Vendor Shall Be Required To Maintain Appropriate Access And Follow Outlined Procedures To Ensure Accurate Eyeglass Processing. vendor May Not Batch Orders For More Than One Day. vendor Shall Respond To All Voicemail, My Healthevet Messages From Veterans, And Inquiries From Veterans, Family Members, Or Va Staff No Later Than 5:00 P.m. The Following Business Day. vendor Shall Offer A Retail Selection Of Frames, Lenses, And Add-on Options For Veteran To Choose From At Their Own Expense. if A Veteran Is Eligible For Eyewear, He/she Should Choose From The Collection Provided From The Visn 10/12 Optical Lab. Vendor Shall Not Attempt To Upgrade Eyewear By Soliciting Add-ons; The Add-ons Must Solely Be At The Request Of The Veteran And May Be Provided By The Vendor. Any Add-on Orders And Agreements Are Between The Veteran And The Vendor, And The Vendor Will Manufacture/supply The Upgraded Eyewear. vendor Awarded This Contract Must Enter Into An Agreement With The Veteran Canteen Service For Sale Of Goods On Government Property. This Agreement Will Include A Commission Payment On Retail Sales To The Veteran Canteen Service. This Refers To The Eyeglasses Sold To The Veteran That Are Not Part Of The Va Benefits. The Agreement With The Veteran Canteen Service Is A Requirement For Any Goods Sold At Va Facilities. vendor Shall Ensure That The Dispensary Is Open And Staffed During The Same Hours As The Servicing Eye Clinic, And For The Minimum Number Of Days Per Week Established In Section 4.0.3 Of This Pws. Vendor Shall Also Ensure Vendor Is Capable Of Providing Services To Patients Commensurate With The Government-provided Estimates. Each Site Should Be Staffed With The Appropriate Number Of Qualified Personnel To Provide Adequate Services To The Estimated Number Of Customers As Provided By The Government For Each Site. Dispensing Sites That Have Two Or More Personnel Shall Be Open During Lunch Period. Locations That Have One Personnel May Be Closed To Meet Legal Requirements For Lunch And Breaks. 5.0.2 Specific Task # 2: the Contractor Shall Conduct The Ordering, Delivery, And Inspection Functions Of The Eyeglasses In Accordance With The Following: the Visn 10/12 Optical Lab Will Ship All Completed Eyeglasses To The Appropriate Location And Include Packing Slips For Verification. If Discrepancies Are Found, The Vendor Must Notify The Visnâ 10/12 Optical Lab Within 24 Hours After Discovery Of The Discrepancy. the Va Reserves The Right To Ship Completed Eyeglasses Directly To The Veteran. Contractor Will Be Paid The Lower Rate When Eyeglasses Are Shipped Directly To The Veteran. vendor Will Notify The Veteran When Glasses Are Ready For Pick Up, No Later Than The Next Business Day After Delivery To The Dispensary. vendor Will Fit And Adjust On Site (preferred Method) Or Mail Glasses To The Veteran S Home If The Veteran Requests Them To Be Mailed. Vendor Will Be Responsible For All Shipping/mailing Costs Associated With Eyeglasses That Are Not Shipped Directly To The Veteran By The Va. The Vendor Shall Have A Confirmation Of Delivery (i.e., Ups, Fedex With Tracking Number, Or Usps-certified Mail (no Signature Required)). Regardless Of The Dispensing Method Chosen By The Veteran, The Vendor Will Document The Dispensing Date Or If Mailed, The Shipping Date In Vista Or Comparable Va Software Program. The Vendor Is Responsible For Tracking All Packages Until Delivery. any Packages Left In Status Other Than Delivered Are The Responsibility Of The Vendor To Resolve Within Seven (7) Business Days Of The Expected Delivery Date. vendor Will Provide The Local Prosthetic Service With A Copy Of The Visn 10/12 Optical Lab Invoice And An Invoice For Dispensing Fees. The Dispensing Fee Invoice Shall Be In Excel Format. The Invoice Must Be Typed And At Minimum, List The Veteran S Last Name, First Name, The Last Four Of His/her Social Security Number, Consult Number And The Date The Eyeglasses Were Dispensed To The Veteran Or Shipped. This Will Be Done For Each Individual Pair Of Eyeglasses Dispensed To The Veteran Or Shipped. vendor Is Responsible For Shipments Sent To The Visn 10/12 Optical Lab Including Patient Owned Frames. All Shipments Will Be Sent Via A Carrier That Can Be Tracked And Must Include A Packing Slip With Patient S Name, Last 4, Optical Shop Account Number, And A Detailed Description Of Items In The Shipment. vendor Shall Ensure That All Information Needed To Fabricate The Eyewear Is Included On The Order Form Sent To The Visn 10/12 Optical Lab No Later Than 5:00â p.m. The Following Workday. vendor Will Bring Any Quality Issues To The Attention Of The Visn 10 Aus Program Manager And/or Cor Within 24 Hours Of Receipt Of The Eyewear. vendor Will Receive The Prescription Consult From The Optometrist And Enter The Prescription And Patient Measurements Into The Roe System (where Available). Vendor Shall Ensure That All Information Needed To Fabricate The Eyeglasses Is Included In The Roe System. The Visn 10/12 Optical Lab Has Access To The Roe System. vendor Shall Use The Va S Roe System Unless It Is Not Available. Vendor S Third Party, Off-site Locations May Not Have Access To The Roe System. In Those Cases, The Third Party/off-site Vendor Shall Send Orders To The On-site Vendor S Location Of Choice And The On-site Vendor Will Be Responsible For Entering Into The Roe System. roe System Will Allow The Optician To View The Status Of The Eyeglasses, Including Whether They Have Been Dispensed Or Shipped. Vendor Can Enter Notes, Including But Not Limited To Special Instructions To The Lab Using The Roe System. 5.0.3 Specific Task # 3: the Contractor Shall Provide To The Cor Or Designee The Following Monthly Reports, Submitted Via Email, No Later Than Five (5) Business Days Following The End Of The Previous Month: patient Satisfaction Survey: A Survey Which The Contractor Is Required To Develop And Update As Needed. The Survey Will Be Approved By The Government Prior To Use. Contractor Shall Ensure A Minimum Of 50 Patients Per Month Complete The Survey At Each Location (vamc, Cbocs, And Clinics). timeliness Report: Measure Turnaround Times From Point Of Initial Contact (fitting) To Eyeglasses Being Dispensed. The Report Will Include At A Minimum The Following: the Location, Date Of Fitting, Optical Lab Order Date, Receipt Date From Optical Lab, And Date Dispensed/mailed To Patient. quality Report: Evaluate Any Issues With Eyeglass Frames, Lenses And Document The Findings, Recommendations And Actions Taken (this Report Addresses Common Problems With Eyeglasses Received From The Lab). part 6 attachment/technical Exhibit Listing 6.0 Attachment/technical Exhibit List 6.0.1 Attachment/technical Exhibit List Performance Requirements Summary: performance Requirements Summary performance Objective standard required Adherence Level the Contractor Shall Provide Services When Fitting For Or Dispensing Eyeglasses. all Customers Serviced (see Section 5.0.1 Of Pws) 100% the Contractor Shall Order, Accept Delivery, And Inspect All Eyeglasses Upon Receipt. all Orders (see Section 5.0.2 Of Pws) 98% the Contractor Shall Provide All Reports To The Government As Required. all Reports Received Within Five Business Days Of The End Of The Previous Month (see Section 5.0.3 Of Pws) 95% the Contractor Shall Provide All Completed Orders To The Optical Lab No Later Than 5:00 P.m. The Following Business Day. all Orders (see Section 5.0.2 Of Pws) 99% the Contractor Shall Respond To All Voicemails, My Healthevet Messages, And Inquiries From Veterans, Family Members, Or Va Staff No Later Than 5:00 P.m. The Following Business Day. all Customers Serviced (see Section 5.0.1 Of Pws) 100% the Contractor Shall Monitor Staff Compliance To Ensure Limited Optician Errors. all Orders (see Section 5.0.1 Of Pws) no More Than Two (2) Optician Errors Per Optician, Per Calendar Month disclaimer this Sources Sought Notice Is Issued Solely For Information And Planning Purposes Only And Does Not Constitute A Solicitation. All Information Received In Response To This Sources Sought Notice That Is Marked As Proprietary Will Be Handled Accordingly. Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Associated With Responding To This Sources Sought Notice.

Details: This Item Is Set To Be Awarded Sole Source 56100_tab_0125_753 item 1: Steering Actuator, Overhaul 1. Scope 1.1 Intent. This Work Item Describes The Requirements For The Contractor To Overhaul The Rotary Vane Steering Actuator Assembly For The Starboard Steering System. 1.2 Government-furnished Property. mti item Description nsn/pn qty n actuator Overhaul Kit nsn: 2530-01-699-0680 pn: Rrm000445315 2 Ea. n hydraulic Coupling Kit nsn: 2530-01-699-0654 pn: Rrm000444570 2 Ea. 2. References coast Guard Drawings coast Guard Drawing 750-wmsl_100_44, Rev K, Unit 3320 Struct - Inner Bottom 2nd Deck Fr 89-98 (asc100332) coast Guard Drawing 750-wmsl-243-003, Rev B, Shipping & Unshipping Of Propulsion Shafting (asc243004) coast Guard Drawing 750-wmsl-556-004, Rev E, Steering Gear Hydraulic Diagram (asc556003) coast Guard Drawing 750-wmsl-556-022, Rev H, Steering Gear And Stern Gate Hydraulic Piping - Unit 3330 (asc556333-hy) coast Guard Drawing 750-wmsl-561-001, Rev D, Steering Gear Foundation (asc561001) coast Guard Drawing 750-wmsl-562-002, Rev C, Rudder (asc562002) coast Guard Drawing 750-wmsl-562-003, Rev D, Rudder Support System (asc562003) coast Guard Publications coast Guard Technical Publication (tp) 7182a, Swbs 561, Jan 2022, Steering Machinery Subsystem – Operation & Maintenance Manual coast Guard Technical Publication (tp) 7193, Swbs 561, Jan 2022, Steering System Operations And Maintenance Manual surface Forces Logistics Center Standard Specification 0000 (sflc Std Spec 0000), 2022, General Requirements surface Forces Logistics Center Standard Specification 0740 (sflc Std Spec 0740), 2022, Welding And Allied Processes surface Forces Logistics Center Standard Specification 3041 (sflc Std Spec 3041), 2022, Shipboard Electrical Cable Test surface Forces Logistics Center Standard Specification 5000 (sflc Std Spec 5000), 2022, Auxiliary Machine Systems surface Forces Logistics Center Standard Specification 6310 (sflc Std Spec 6310), 2022, Requirements For Preservation Of Ship Structures other References international Standard Organization (iso) 4406, 2021, Hydraulic Fluid Power - Fluids - Method For Coding Level Of Contamination By Solid Particles kongsberg Maintenance Manual Dmn000278736, Rev C, Kongsberg Steering Gear Type Sr And Sv mil-std-419, Sept 2021, Cleaning And Protecting Piping Tubing, And Fittings For Hydraulic Power Transmission Equipment 3. Requirements 3.1 General. 3.1.1 Cir. none. 3.1.2 Tech Rep. The Contractor Must Provide The Services Of Tech Reps In Accordance With The Following Subparagraphs. 3.1.2.1 The Contractor Must Provide The Services Of An Oem Authorized/ Licensed Tech Rep For The Kongsberg Steering Actuator To Accomplish The Following On Site: provide Manufacturer's Proprietary Information, Software, And Tools Pertinent To The Equipment/system. assist With Proper Repair Methods And Ensure Compliance With Manufacturer's Procedures And Standards During Disassembly, Inspection, Repair, Modification, Calibration, And Reassembly Of The Equipment/system. perform All Actual Repair Work On The Actuator. 3.1.2.1.1 Ensure The Tech Rep Is An Oem Certified Representative For The System/equipment Stated Above And Demonstrated On Their Résumé. 3.1.2.2 Tech Rep. The Contractor Must Provide The Services Of A Qualified Technical Representative Who Is Familiar With The Wmsl Steering System Hydraulic Power Units To Accomplish The Following On Site: advise On Manufacturer's Proprietary System Information. ensure Compliance With Manufacturer's Procedures And Standards During System Disassembly, Inspection, Repair, Modification, Calibration, And Reassembly Of The Equipment/system As Applicable. 3.1.2.2.1 Ensure The Tech Rep Has Experience With The System/equipment Stated Above And Demonstrated On Their Résumé. 3.1.2.2.2 Submit The Name And Résumé Of The Tech Rep To The Cor At The Arrival Conference. 3.1.3 Protective Measures. The Contractor Must Furnish And Install All Protective Measures In Accordance With Sflc Std Spec 0000, Paragraph 3.3.3 (vessel Component, Space, And Equipment Protection). 3.1.3.1 Protection Of Fine Surfaces. The Contractor Must Protect All Fine Surfaces In Accordance With Sflc Std. Spec 5000. 3.1.3.2 Hydraulic System Contamination Protection. The Contractor Must Maintain Existing Hydraulic Cleanliness In Accordance With Sflc Std. Spec 5000. 3.1.3.3 Maintain The Strictest Standards Of Cleanliness In Accordance With Mil-std-419 While Hydraulic System Is Open. Work On The Steering Hydraulics Is Not Permitted While Any Blasting, Grinding, Welding, Etc. Is Being Performed In, Or Adjacent To, The Steering Gear Space. 3.1.3.4 Hatch Opening Must Be Covered And Roped Off To Prevent A Falling Hazard To Personnel When Not In Use. note plastic Bags May Be Used Only When Arrangement Or Configuration Prevents The Use Of The Other Sealing Methods Specified Above. 3.1.4 Interferences. The Contractor Must Handle All Interferences In Accordance With Sflc Std Spec 0000, Paragraph 3.3.5 (interferences). Known Interferences Include, But Are Not Limited To The Following: access Plate (berp) Located Above The Port And Starboard Steering Actuator. piping electrical Wires padeye Plate Covers rudder Support Covers hydraulic Oil (approx. 560 Gals.) overhead ventilation Ducts insulation pipe Hangers/brackets note coast Guard Personnel Will Operate All Shipboard Machinery And Equipment. 3.2 Operational Test, Initial. Prior To Commencement Of Work, The Contractor Must, Under The Direction Of The Oem Tech Rep, Witness Coast Guard Personnel Perform An Initial Operational Test Of All Items Or Shipboard Devices To Be Disturbed, Used, Repaired, Or Altered, To Demonstrate Existing Operational Condition. Perform The Following Inspections. Use Data Sheet No. 1 (section 4 Of This Wi) To Record Results For Starboard Actuator Only. Submit A Cfr. 3.2.1 Verify That All Rudder Angle Indicators (manual Indicator On Actuator, Mcms Indicator, Local Indicator, And Remote Indicators On Bridge) Must Be Within A 2-degree Tolerance Throughout Range Of Motion. warning special Care Should Be Taken Not To Hold The Rudder Hard Over For More Than A Few Seconds At A Time To Avoid Overheating The System. 3.2.2 Starboard Steering Gear: In The Presence Of The Coast Guard Inspector, Place The 1a Hpu Online, With The Controller Set To ‘remote’, Cycle The Rudder From Zero To Port (hard-over), From Port To Starboard (hard-over), From Starboard To Port (hard-over) And From Port To Zero. On The Port To Starboard And Starboard To Port Transitions, Record The Time From 30 Degrees On One Side To 30 Degrees On The Other Side (speed Should Be 3 Degrees/second Or 20 (+/-1) Seconds Total). With The Rudder At Zero Degrees And The Hpu Running, Inspect All Hoses, Fittings And Seals For Leakage. 3.2.3 Set The Steering Controller To “local”. Using The Pushbuttons Operators On The Pump, Cycle The Rudder From Zero To 15 Degrees Port, From 15 Degrees Port To 15 Degrees Starboard And From 15 Degrees Starboard To Zero. It Is Not Necessary To Record Times On This Evolution – This Portion Of The Test Only Demonstrates That Local Control Can Be Achieved. Record The Result As Sat Or Unsat. 3.2.4 Switch To 1b Hpu And Perform The Same Tests To Complete The Starboard Steering Gear System Test. note the Cutter Is Currently Outfitted With Recessed Padeyes As Located On Cg Drawings 750-wmsl_100_44 And 750-wmsl-243-003 And Are In Place In The Hull Above Each Propeller And Rudder. Padeye Numbers Are 22, 23, 24, And 25 As Identified On Coast Guard Drawing 750-wmsl-243-003. access Covers For The Recessed Padeyes Are Not Required To Be Reinstalled. each Rudder Weighs Approximately 12,000 Lbs. 3.3 Rudder Support. The Contractor Must Ensure The Rudder Has Been Supported In Place To Allow Repairs Of The Steering Actuator Assembly. Coast Guard Divers Will Remove Metal Plate Covers To Access The Recessed Padeyes Above Each Rudder. The Contractor Must Pull Test All Existing Recessed Padeyes To 150% Of Their Maximum Expected Working Load For 10 Minutes. In No Case May A Padeye’s “expected Working Load” (a) Exceed The Tabulated Maximum Working Load For The Padeye’s Size Or (b) Exceed The Structure’s (that Padeye Is Attached To) Ability To Carry The Load. At Conclusion Of The Pull Test, Visually Inspect Each Padeye For Damage. note the Centerline Of The Rudder Post Is Located Forward Of Frame 96, Above The Stern Gate Utility Room And Forward Of An Inaccessible Void. If Additional Padeyes Are Necessary, It May Be Necessary To Clean And Gas Free These Spaces. 3.4 Hydraulic Reservoir Inspection. The Contractor Must Take Oil Samples For Testing Of Existing Oil From Each Reservoir And Send Out For Analysis. Label And Retain One Extra Oil Sample From Each System For Back-up Testing If Necessary. Drain All 2135 Th Hydraulic Oil From The Hpu Actuators And Reservoirs (approximately 550 Gallons Total), And Dispose Of In Accordance With All State, Local And Federal Regulations. Provide Cfr With Test Results. For Steering Gear Hydraulic System Details, See Coast Guard Drawings 750-wmsl-556-004 And 750-wmsl-556-022. 3.4.1 Remove Access Covers From Reservoirs And Storage Tanks. Take Samples Of Any Heavy Sludge Or Particulate Matter In The Tanks. Remove All Sludge And Debris And Wipe Down With Lint Free Rags. If Any Metallic Debris (metal Filings, Shavings, Babbitt) Is Present, Notify The Coast Guard Inspector Immediately. 3.4.2 When All Tanks Are Thoroughly Clean, And Just Prior To Closure Ensure All Foreign Objects Have Been Removed (e.g. Rags, Caps, Towels, Plugs). Contractor Must Present These Areas To The Coast Guard Inspector, Then Close In The Presence Of The Coast Guard Inspector. Install New Gaskets. 3.5 Steering Actuator Disassembly And Inspection. The Contractor Must, Under The Direction Of Or Performed By The Oem Tech Rep Support, Overhaul The Starboard Steering Actuators In Accordance With Oem Procedures. Rudder Foundation, Rudder Stock, And Rudder Support System Are Shown On Cg Dwgs 750-wmsl-561-001 And 750-wmsl-562-003. At A Minimum, The Contractor Must Renew The Following Parts: piston Seals hp Seals And Backing Strips lp Seals bearing Shells o-rings 3.5.1 Collect And Dispose Of All Drained Fluids In Accordance With All Federal, State, And Local Regulations. 3.5.2 Prior To Disassembly, Wipe Down The Exterior Of The Actuator Assembly And The General Area Near The Actuator To Remove Dirt And Contaminants. Maintain A Clean Environment When Working Around Open Hydraulic Equipment. 3.5.3 Actuator Internal Inspection. Inspect The Interior Of The Actuators (including, But Not Limited To, The Piston, Piston Dividers, Upper And Lower Housings, Hydraulic Coupling, Rotor, And Rudder Stock) For Any Indications Of Wear Or Damage. Submit A Cfr Documenting The Existing Condition Of The Actuators. 3.5.4 During Final Installation Of The Actuator, Ensure The Rudder And Rudder Stool Are Aligned, And The Actuator And Helm Are Set At 0 Degrees. warning foreign Materials Present A High Risk Of Severe Damage To Steering Gear System. Extra Precautions Are Required To Ensure Cleanliness Of The Hydraulic System. note suction Strainers Are Located Inside The Service Tanks. 3.6 Filters And Strainers, Renew. The Contractor Must Renew The Return, Charge, And Servo Filters On Each Of The Starboard Hpu’s. Close Up Filter Housings And Torque Fasteners In Accordance With Chapter 5.3 Of Cg Tech Pub 7182a. Renew The Suction Strainers And Reservoir Filter Breather On Each Hpu. 3.7 Manifold And Valve Inspection And Testing. The Contractor Must Clean, Inspect And Test The Hydraulic Manifold And Valves (i.e. Control, Relief, And Locking Valves) For The Starboard System. Clean And Visually Inspect All Parts For Defects, Deterioration, Dirt, Scale, Rust, Grease, And Foreign Material. Submit A Cfr. note hydraulic Hoses Life Is 12 Years 3.8 Hose Inspection. The Contractor Must Visually Inspect The Condition Of All Flexible Hoses Identified In Tables 1 And 2 And Submit A Cfr With The Following Information. Hoses That Require Renewal Will Be Subject To A Change Request. hose Physical Condition service Life Dates (date For Required Hose Renewal; If Not Specified, Add 12 Years To Installation Date) table 1 – Stbd Steering Gear (compartment: 2-94-1-e) hose Serial # length (in.) size (in.) part Number fitting #1 fitting #2 test Pressure (psi) sg-f-001 20 1 f20606-16-16-16c-20.00 female Jic female Jic 200 sg-f-002 26 1/2 f20606-8-8-8c-26.00 female Jic female Jic 375 sg-f-003 49 2 2651-32 female Jic male Cpv 5000 sg-f-004 35 2 2651-32 male Cpv male Cpv 5000 sg-f-005 31.5 3/4 f20606-12-12-12c-31.50 female Jic female Jic 200 sg-f-006 43 2 2651-32 male Cpv male Cpv 5000 sg-f-007 43 2 2651-32 male Cpv male Cpv 5000 sg-f-008 26.5 3/4 f2060606-12-12-12c-26.50 female Jic female Jic 200 sg-f-009 32 1/2 f2060606-8-8-8c-32.00 female Jic female Jic 375 table 2 – Port Steering Gear (compartment: 2-94-2-e) hose Serial # length (in.) size (in.) part Number fitting #1 fitting #2 test Pressure (psi) sg-f-011 20 1 f20606-16-16-16c-20.00 female Jic female Jic 200 sg-f-012 26 1/2 f20606-8-8-8c-26.00 female Jic female Jic 375 sg-f-013 31.5 3/4 f20606-12-12-12c-31.50 female Jic female Jic 200 sg-f-014 49 2 2651-32 female Jic male Cpv 5000 sg-f-015 35 2 2651-32 male Cpv male Cpv 5000 sg-f-016 26.5 3/4 f2060606-12-12-12c-26.50 female Jic female Jic 200 sg-f-017 43 2 2651-32 male Cpv male Cpv 5000 sg-f-018 43 2 2651-32 male Cpv male Cpv 5000 sg-f-019 32 1/2 f2060606-8-8-8c-32.00 female Jic female Jic 200 3.9 Hydraulic Oil Refilling. The Contractor Must Refill The Reservoirs With Hydraulic Oil Per Mil-h-17672, Symbol 2135, In Accordance With Cg Tech Pub 7182a. The Contractor Must Filter New Hydraulic Oil In Accordance With Sflc Std Spec 5000, Paragraph C2.1.2 Prior To Entry Into The Cutter’s Tanks Or System. Cleanliness Of Oil Must Be Iso 4406 Cleanliness Code Of 17/14 Or Better. note coast Guard Personnel Will Operate All Shipboard Machinery And Equipment. if Covered By A Separate Work Item, Final Testing Of The Steering System Is Only Required To Be Performed Once During This Availability. 3.10 Operational Test, Post Repairs. After Completion Of Work And In The Presence Of The Coast Guard Inspector, The Contractor Must Thoroughly Test And Demonstrate The Equipment Listed Below To Be In Satisfactory Operating Condition. Use Data Sheet No. 2 (section 4 Of This Wi) To Record Results For Starboard Actuator Only. Submit A Cfr. 3.10.1 Verify That The Rudders Operate Throughout Their Full Range With No Indications Of Binding And Appear Smooth During Operation. 3.10.2 All Rudder Angle Indicators (manual Indicator On Actuator, Mcms Indicator, Local Indicator, And Remote Indicators On Bridge) Must Be Within A 2-degree Tolerance Throughout Range Of Motion. 3.10.3 The Contractor Must Perform The Initial Startup Procedures In Accordance With Coast Guard Tp 7182, Paragraph 7-2. Upon Completion, Verify That The Relief Valves Are Properly Set In Accordance With Table 3. table 3 – Relief Valves service Description set Point (psig) pump Main System Relief Valve 1530 ± 25 relief Valve (charge) 217 ± 25 relief Valve (servo) 1450 ± 25 cross-line Relief Valve 1580 ± 25 warning special Care Should Be Taken Not To Hold The Rudder Hard Over For More Than A Few Seconds At A Time To Avoid Overheating The System. 3.10.4 Starting With The Starboard Steering Gear, And In The Presence Of The Coast Guard Inspector, Place The 1a Hpu Online, With The Controller Set To ‘remote’, Cycle The Rudder From Zero To Port (hard-over), From Port To Starboard (hard-over), From Starboard To Port (hard-over) And From Port To Zero. On The Port To Starboard And Starboard To Port Transitions, Record The Time From 30 Degrees On One Side To 30 Degrees On The Other Side (speed Should Be 3 Degrees/second Or 20 (+/-1) Seconds Total). With The Rudder At Zero Degrees And The Hpu Running, Inspect All Hoses, Fittings And Seals For Leakage. 3.10.5 Set The Steering Controller To “local”. Using The Pushbuttons Operators On The Pump, Cycle The Rudder From Zero To 15 Degrees Port, From 15 Degrees Port To 15 Degrees Starboard And From 15 Degrees Starboard To Zero. It Is Not Necessary To Record Times On This Evolution – This Portion Of The Test Only Demonstrates That Local Control Can Be Achieved. Record The Result As Sat Or Unsat. 3.10.6 Switch To 1b Hpu And Perform The Same Tests To Complete The Starboard Steering Gear System Test. 3.10.7 The Contractor Must Perform The Internal Leakage Test Per Paragraph 7.10 Of The Kongsberg Maintenance Manual Dmn000278736 For Both Port And Starboard Actuators. Measure The Total Leakage During Each Separate Segment Of Testing (port To Starboard Hard-over, Hard-over Starboard, Starboard To Port Hard-over, And Hard-over Port) And Submit The Results Via Cfr. 3.11 Oil Sample Analysis. The Contractor Must Take Oil Samples For Testing Of Existing Oil From Each Reservoir And Send Out For Analysis To Demonstrate Cleanliness Has Been Maintained. Submit A Cfr With The Oil Sample Analysis Report. 3.12 Touch-up Preservation. The Contractor Must Prepare And Coat All New And Disturbed Surfaces To Match Existing Adjacent Surfaces In Accordance With Sflc Std Spec 6310, Paragraph 3.1.13 (touch-ups And Minor Coating Repairs.) 4.0 Place Of Performance- Cgc Hamilton In Charleston Sc. 5.0 Period Of Performance- 17 Feb 2025 – 28 Feb 25 6.0 Points Of Contact. Uscg-sflc-lre Pl Asset Management: Cwo Matthew Temple, Matthew.temple@uscg.mil, 510-460-8195

Details: Description Republic Of The Philippines Department Of Health Western Visayas Sanitarium And General Hospital Santa Barbara, Iloilo Invitation To Bid For Supply, Delivery And Installation Of Various Hospital Equipment Ib No. 2024-12-018-g The Western Visayas Sanitarium, Through Its Bids And Awards Committee (bac), Invites Suppliers/manufacturers/distributors To Apply For Eligibility And To Bid For The Hereunder Project: Name Of Project : Supply, Delivery And Installation Of Various Hospital Equipment Location : Western Visayas Sanitarium And General Hospital, Inangayan, Santa Barbara, Iloilo Approved Budget For : Php 34,665,000.00 The Contract (abc) Fund Source : Caf No. 2024-133-gf Delivery Period : Within Ninety (90) Working Days After Receipt Of The Notice To Proceed Line Items Abc: Php 34,665,000.00 Lot 1 No. Description Unit Of Measure Quantity Approved Budget Cost (php) 1 Electrical Machine. Brand New. Product Specifications: Combination Of Electrotherapy And Ultrasound; With 3 Independent Channels And Body Diagram Installed; Power Supply: Ac 100- 240 V, Number Of Channels: 3 Independent (2 For Electrotherapy, 1 For Ultrasound) Electrotherapy; Ten& Ems, Ultrasound Functions; Electrode Pads For Tens & Ems; Us Probe Head: Large And Small. Warranty -1 Year From Delivery And Installation. Unit 1 290,000.00 2 Hand Dynanometer. Brand New. Product Specifications: Hydraulic Adjustable Handle. Strength Can Be Viewed In Pounds Or Kilogram. Can Measure Up To 90kg (200lbs.). Durable Metal Gauge. Warranty –at Least 6 Months Upon Delivery And Installation. Unit 1 55,000.00 3 Parallel Bars. Brand New. Product Specifications: Adjustable And Foldable. Stainless Steel Bars And Steel Base. Height Adjust Within 26''-40''. Width -24''-36". Length Ranges: 7-10 Feet. Warranty -at Least 6 Months Upon Delivery And Installation Unit 1 50,000.00 4 Pulley System. Brand New. Product Specifications: Single Handle/dual Tower. Chest And Floor Height Mounted Handle. Easily Adjustable Handles. Wheelchair Accessible. Warranty –at Least 1 Year Upon Delivery And Installation. Unit 1 150,000.00 5 Pbx, Smart Hybrid. Brand New. Product Specifications: Designed For Telemedicine Use. Genuine And High Quality Brand. Pabx Built-in Extensions 16 Analog. At Least 2 Card Slots And 2 Slots Trunk Extension Card Switch System. Ability To Equip Sub-frame Ns-320; 12-32 Trunk Extensions. Sub-frame To Extend Pbx Ns300. Port Connected To The Main Frame. Dimensions: 40-45 X 35-36 X 86-90 Cms. Warranty –at Least 6 Months From Delivery And Installation * Unit 1 100,000.00 6 Uninterrupted Power Supply. Brand New. Products Specifications: Designed For Telemedicine Operation. 3000va. Output Power Capacity-3000va, Mount: 3u Rack Mountable. Nominal Output Voltage -230v. Dimensions: 20-22 X 19-20 X 5-6 Inches. Warranty –at Least 6 Months Upon Delivery And Installation. * Unit 1 400,000.00 7 Medical Waste Shredder. Brand New. Product Specifications: 20hp Motor Slow-speed And High Torque Dual Shaft Shredders, 5/16″ Wide Cutters, With Bearing Protection And Cleaning Fitters. Features: Efficiently Shred Syringes, Face Masks, Boxed Medical Waste, Pill Bottles, Etc., Available With A Split Cutting Chamber That Allows For Two Different Shred Widths Within One Shredder, The Manner Of In Feed And Output Are Also Divided. Includes Training And Certification, Warranty 1 Year Upon Installation Unit 1 350,000.00 8 Portable Multi-parameter Analyzer Flow Water Quality Testing. Brand New. Product Specifications: Measures Water Quality Parameter For Ph/ec/ise/do/temp. Mv/orp/px/resistivity/tds/sal./do Saturation. Features: Portable Device, Color High Contrast Lcd Touchscreen, Data Storage1000 Sets For Each Parameter, Support For Usb Communication, Ip65 Waterproof, Includes All Necessary Accessories And Consumables, Includes Training And Certification For Use, Warranty For 1 Year Upon Installation Unit 1 200,000.00 9 Water Purification System. Brand New. Product Specifications: 6000 Gdp Reverse Osmosis Machine. Up To 1200 Containers Per Day. Double U.s. Membrane. 2 Tanks 1000ltrs. For Raw & Product Water. At Least 28 Stages Of Water Filtration. To Include Piping Line From Water Station To Specified Areas Within The Health Facility. To Include Necessary. Building/structure For The Water Station. Service Warranty 1 Year After Delivery And Installation. To Include Service And User Training. Including Consumables: 50 Gallons Round Containers, 50 Gallons Slim Containers, 1 Sack Industrial Salt. * Unit 1 350,000.00 10 Anesthesia Machine With Cardiac Monitor. Brand New. Product Specifications: Main Gas Supply -oxygen, Air. Pin Index Supply System: Oxygen, Air. Ventilatior: With At Least Six (6) Ventilation Modes. Machine Must Be Able To Ventilate Patient Using The Preset Settings Provided By The End-user Even Presence Of Driving Gas Is Temporarily Unavailable. Ventilator Must Be Enclosed With Metal Casing To Prevent Entry Of Foreign Items Including Fluid. Ceramic Type Of Inspiratory And Expiratory Valve. Ventilator Must Have High Pressure Valve That Ensures Release Of Excess Pressure When Required. Ventilator Must Be Functional When Machine Is Connected Either Through Direct Power Supply Or Back Up Battery. Breathing System: The Volume Of The Compact Breathing System And Co2 Absorber Must Be 1.7l Excluding Hoses And Breathing Bag. Volume Of Co2 Absorber Reusable Canister Must Be 1.5l. With Bypass Valve Located In Breathing System Allowing Continuous Machine Operation While Changing Co2 Absorber. With Fresh-gas Decoupling Valve That Prevents Direct Entry Of Pressure In The Patient Airway When Pressing The O2 Flush Button, Peep And Pressure Limitation. With Breathing System That Can Be Detached From The Main Unit Without Tools Required. Breathing System Should Be Separated From The Main Unit With Mounting That Can Be Positioned From Any Direction Without Moving The Entire Anesthesia Machine. With Ceramic Type Of Inspiratory And Expiratory Valve. With Sample Gas Return Port. With Pup Off Pressure Release Valve Located At The Apl Valve. With Moisture Reduction System. Hot Steam Sterilization Can Be Carried Out At 134 ° C (273.2 ° F). With Heated Breathing System. Anesthesia Gas Supply Module: Range Of Fresh Gas Flow Indicators: 0.0 To 12.0 L/min. O2 Flush (bypass): At 87 Psi (6 Kpa X 100): Max. 75 L/min At 41 Psi (2.8 Kpa X 100): Min. 25 L/min. With Metering Valve And Dual Flow Tubes For Fresh-gas. With Integrated O2 Monitoring Located In The Screen. Vaporizer: With Two (2) Selectatec Vaporizer Mounting. With One (1) Unit Sevoflurane And One (1) Unit Isoflurane Vaporizer. Vaporizer Must Have No Cloth Component Which Allows Item To Be Functional Immediately Even Transporting It In An Upside Down Position. Oxygen Sensor: With Oxygen Sensor That Measures Percentage Of Oxygen. Flow Sensor: With Constant Temperature Hot-wire Anemometer Flow Sensor. Must Be Located Within The Anesthesia Unit Distal To The Patient Area. Flow Sensor Must Be Reusable. Auxillary Low Flow Oxygen: With Integrated Low Flow Oxygen Supply For Mask And Nasal Cannula Application. Writing Table/drawers/mounting: With At Least 3 Drawers As Storage For Other Accessories. With A Retractable Writing Table That Can Hold At Least 10kgs. Advanced And Safety Features: Functional Even The Battery Is Completely Discharged, All Pneumatic Functions Continue To Be Available (apl Valve, Breathing Pressure Gauge, Cylinder And Pipeline Gauges, Fresh Gas And Agent Delivery, And O2, Air, Flow Meters).manual Or Spontaneous Ventilation Can Be Maintained During Power Failure And Discharged Of Battery. In Case Of No Power And Totally Discharged Battery, Machine Must Be Shifted Automatically From Ventilator Mode To Manual Mode Without Any Switch Or Button Required. Start-up Time Must Be Less Than 15 Seconds. Power Input Data: Power Supply: Rating Non-configurable 100 To 240 Vac, 50/60 Hz, 145 Va. Battery Operation Time: Up To 2 Hours, Minimum Of 45 Minutes. Parameters: Minimum Tidal Volume (vt) Required: 20 Ml. Breathing Frequency (rate): 4 To 60 Bpm (1/min). Inspiratory Pressure: Peep + 5 To 65 Cmh2o. Inspiratory Flow (inspflow): 10 To 75 L/min In Volume And Pressure Control Modes, 10 To 85 L/min In Pressure Support And Simv/ps Modes. Inspiration Pause: 0 To 50 %. Simv Inspiratory Time: 0.3 - 4.0 Sec. Positive End Expiratory Pressure: (peep) 0 To 20 Cmh2o. Inspiration/expiration Ratio: (ti:te) 4:1 To 1:4. Pressure Limiting: 70 Cmh2o. Range Of Fresh Gas Flow Indicators: 0.0 To 12.0 L/min. Pressure Support Level: Peep + 3 To 20 Cmh2o. Min. Frequency For Apnoe-ventilation: (freq. Min.) 3 To 20 Bpm And “off”. Trigger Level: 2 To 15 L/min. Standard Accessories: One (1) Unit O2 Regulator, One (1) Unit Air Regulator, O2, Air Fittings And Hose Clamps, One (1) Unit Adult Anesthesia Circuit With 2l Bag. Biolight M12 Patient Monitor (basic Configuration). Technical Specification: Display/waveforms: Screen Size Display: Not Less Than 12" Color Tft Screen. Screen Navigation: Touch Screen With Quick Volume And Brightness Adjustment. Support Quick Key, Able To Access Specific Functions Or Perform Operations Easily And Quickly. No. Of Waveforms: At Least 7 Waveforms (using Standard Screen Display). Battery: Internal Battery Duration Must Be: ≥ At Least 240 (built In Battery). Can Upgrade Lithium Battery, Battery Power Supply ≥480 Min. Ecg: Ecg Leads: 3/5 Leads, Display Sensitivity: ×0.25, ×0.5, ×1, ×2, ×4,auto Gain, Must Have A Smart Lead Off Feature, Must Have An Ecg Calibration Feature, Must Have An St Segment Analysis And Monitoring. Heart Rate Range Must Be: Adu: 10 To 300 Bpm, Ped/neo: 10 To 350 Bpm, Must Have Two (2) Hr Averaging Method. With Ecg Multi-lead Synchronous Analysis Function, Analysis Of Multiple Cardiac Leads At The Same Time, Can Be Accurately Monitored In The Case Of Individual Lead Interference, With Intelligent Lead Fall Monitoring Function. St-segment Analysis Can Show The St Graphic, Which Help Indicates The St Alarm Status More Faster. Nibp: Nibp Measurements Must Comply With The American National Standard For Electronic Or Automated Sphygmomanometers: - (ansi/aami/iso 81060-2:2009, Ansi/aami Sp10:2002) In Relation To Mean Error And Standard Deviation. Measurement Mode： Manual, Auto, Stat, And Sequence. Sequence Mode Could Support 5 Different Modes. Maximum Measuring Interval In Auto Mode Must. Must Have An Overpressure Protection For Nibp. Temperature: Must Have Dual-channel Body Temperature Monitoring With Difference Display Measurements. Must Support Skin And/or Oral/rectal. If More Than One Temperature Probe Is Used, The Monitor Will Be Capable Of Calculating And Displaying A Delta Reading. Measuring Range: 0～50 ℃. Spo2: Must Be Used In Low Pi (perfusion Index). Resp: Detection Method: Respiratory Rate And Respiratory Waveform Must Be Monitored By Pulse Wave. Trends: Trend Data For All Parameters In Tabular And Graphic Formats Must Be: 180h. Stored Nibp Measurements Must Be: Up To 2400 Groups. Stored Alarm Events Must Be: 3000 Groups And Associated Waveform. Holographic Waveform Must Be 72 Hours. Printer/recorder: Must Support 3-channel Recorder To Realize Thermal Printing; Support Network Printing Function. Network Capability: The Ip Address Of Each Patient Monitor Shall Be User Configurable. Features: -the Monitor Must Provide Electronic Early Warning Scor （ews, Glasgow Coma Scale (gcs), And Oxycrg Screen. -oxycrg Screen Shows Two Trend Curves And A Compression Waveform, Support To Review 48 Hours Trend Curve And Compression Waveform On The Oxycrg Review Screen. -accessories Storage Box, Help Manage Accessories And Prevent Accessories Missing Or Broken Problem. -user Shall Be Able To Freeze The Waveforms On The Screen And Then Review It To Carefully Observe The Patient During This Time. -up To 4 Timers Shall Be Able To Be Configured On Monitor Display To Count Up Or Down The Required Time In Minute And Second With Audio Alarm To Alert User. - The Monitor Shall Provide Following Specific Working Modes: Standby, Intubation, Night, Privacy, And Demo Modes. Accessories Included: 3/5 Lead Ecg Cable, 3/5 Lead Ecg Lead Wires, Adult Spo2 Sensor, Pediatric Spo2 Sensor, Temperature Probe Skin, Temperature Probe Oral/rectal, Nibp Cuff Adult, Nibp Cuff Pedia, Wall Mount / Trolley, One (1) Unit Pediatric Anesthesia Circuit With 1l Bag, Two (2) Units Power Adapter. Includes Avr Machine For Anesthesia Machine. Warranty -2 Years From Delivery, Installation, And Training/orientation. Unit 1 3,300,000.00 11 Cardiac Monitor With Capnograph. Brand New. Product Specifications: Display/waveforms: Screen Size Display: Not Less Than 12" Color Tft Screen. Screen Navigation: Touch Screen With Quickly Volume And Brightness Adjustment By Gestures Operate. Support Quick Key, Can Easily And Quickly Access Some Functions Or Perform Operations. No. Of Waveforms: At Least 7 Waveforms (using Standard Screen Display). Size Must Be: At Least 175mm X 320mm X262mm. With Auto Speech Recognition Module Implements The Voice Interaction With The Patient Monitor. Battery: Internal Battery Duration Must Be: ≥ At Least 240 (built In Battery). Can Up-grade Lithium Battery Power Supply ≥480min. Ecg: 5 Leads Display Sensitivity: ×0.25, ×0.5, ×1, ×2, ×4, Auto Gain. Must Have A Smart Lead Off Feature, Must Have An Ecg Calibration Feature, Must Have An St Segment Analysis And Monitoring. Heart Rate Range Must Be: Adu: 15 To 300 Bpm, Ped/neo: 10 To 350 Bpm. Must Have Two (2) Hr Averaging Method. With Ecg Multi-lead Synchronous Analysis Function, Analysis Of Multiple Cardiac Leads At The Same Time, Can Be Accurately Monitored In The Case Of Individual Lead Interference, With Intelligent Lead Fall Monitoring Function. St-segment Analysis Can Show The St Graphic, Which Help Indicates The St Alarm Status More Faster. Nibp: Nibp Measurements Must Comply With The American. National Standard For Electronic Or Automated. Sphygmomanometers: - (ansi/aami/iso 81060-2:2009, Ansi/aami. Sp10:2002) In Relation To Mean Error And Standard Deviation. Measurement Mode： Manual，auto, Stat, And Sequence，sequence Mode Could Support 5 Different Modes. Maximum Measuring Interval In Auto Mode Must. Must Have A Dual Overpressure Protection For Nibp. Temperature: Must Have Dual-channel Body Temperature Monitoring With Difference Display Measurements. Must Support Skin Or Oral If More Than One Temperature Probe Is Used, The Monitor Will Be Capable Of Calculating And Displaying A Delta Reading. Measuring Range: 0～50 ℃. Spo2: Must Be Used In Low Pi (perfusion Index). Resp: Detection Method: Respiratory Rate And Respiratory Waveform Must Be Monitored By Pulse Wave. Ibp: Support 2-channel Ibp Measurement Range: -50mmhg～+350mmhg. Types Of Measuring Blood Vessels: Arterial Pressure (art), Pulmonary Artery Pressure (pa), Central Venous Pressure (cvp), Right Atrial Pressure (rap), Left Atrial Pressure (lap), Intracranial Pressure (icp); Pulmonary Artery Wedge Pressure (pawp); Cerebral Perfusion Pressure (cpp). The Monitor Will Calculate The Ppv Based On Any Arterial Pressure Value Between Heartbeats. Etco2: Measuring Range: Etco 2 0 To 150 Mmhg. Fico: 3 To 50 Mmhg. Awrr: 0 To 150 Rpm (mainstream). Trends: Trend Data For All Parameters In Tabular And Graphic Formats Must Be: 180h. Stored Nibp Measurements Must Be: Up To 2400 Groups. Stored Alarm Events Must Be: 3000 Groups And Associated Waveform. Holographic Waveform Must Be 72 Hours Printer/recorder: Must Support 3-channel Recorder To Realize Thermal Printing; Support Network Printing Function Network Capability: The Ip Address Of Each Patient Monitor Shall Be User Configurable. The Upper/lower Limits Of Alarms Can Be Configured Via Networking From The Central. The Alarms At Bedside Can Be Paused Or Muted Via Networking From The Central. Features: -the Monitor Must Provide Electronic Early Warning Scor （ews）, Glasgow Coma Scale (gcs ), And Oxycrg Screen. -oxycrg Screen Shows Two Trend Curves And A Compression Waveform, Support To Review 48 Hours Trend Curve And Compression Waveform On The Oxycrg Review Screen -accessories Storage Box, Help Manage Accessories And Prevent Accessories Missing Or Broken Problem -all-in-one Monitoring Adult, Children, And Newborn Patients. -user Shall Be Able To Freeze The Waveforms On The Screen And Then Review It To Carefully Observe The Patient During This Time. -up To 4 Timers Shall Be Able To Be Configured On Monitor Display To Count Up Or Down The Required Time In Minute And Second With Audio Alarm To Alert User. - The Monitor Shall Provide Following Specific Working Modes: Standby, Intubation, Night, Privacy, And Demo Modes. Warranty -1 Year From Delivery And Installation. Unit 2 500,000.00 12 Ceasarian Instrument Set. Brand New. Product Specifications: Made Of Heavy Duty Stainless Steel. Includes The Following Items: 1 Pc. Scalpel Handle #3 With Measure 125mm, 1 Pc. Scalpel Handle #4 135mm, 1 Pc. Tc Metzenbaum Scissors Cvd 180mm, 1 Pc. Lexer Scissors Narr Str 165mm, 1 Pc. Mayo-lexer Scissors Cvd 165mm, 1 Pc. Lister Bandage Scissors Hvy 180mm, 1 Pc. Standard Forceps Serr 160mm, 1 Pc. Standard Tissue Forceps 1x2 160mm, 5 Pcs. Lorna Towel Clamp Non-perf 130mm, 6 Pcs. Halsted-mosquito Forceps Delstr125mm, 6 Pcs. Halsted-mosquito Forceps Del Cvd125mm, 2 Pcs. Kelly Forceps Del Str 140mm, 6 Pcs Moynihan Hemostatic Forceps, Crv, 150mm, 1 Pc. Tc Mayo-hegar Ndlholderhvyserr150mm, 1 Pc. Tc Hegar Needle Holder Hvy-serr 205mm, 1 Pc. Us-army Retrac.26x15/43x15-23x15/40x15, 1 Pc. Richardson-eastman Bt471rbt472r, 6 Pcs. Boys-allis Forceps 5x6 155mm, 2 Pcs. Kidney Tray Stainless Steel 250mm, 1 Pc. Bottom For 3/4 Container Height:135 Mm, 1 Pc. Primeline Pro 3/4 Lid Red, 1 Pc. 3/4 Size Perf Basket 406x253x76mm, 1 Pc. Silicone Basket Liner 3/4 Size, 1 Pc.mayo Safety Pin F/ring-hdl Inst 140mm, 1 Pc. Ident. Label Up To 13 Letters Red. Warranty –at Least Eat 1 Year From Delivery. Set 2 1,520,000.00 13 Chemical Analyzer. Brand New. Product Specifications: Combined Instrument With Two Complementary Technologies: Raman Spectroscopy And Colorimetric Detection Confirmatory Testing: One Instrument Capable Of Confirmatory Testing Using Two Technologies Including 1) Swgdrug Category A Technique For Presumptive Testing, And 2) Swgdrug Category C Technique For Confirmatory Testing Safety Of Features For Measuring Energetic Samples: Trace Detection Testing For Energetics Without Need For Opening The Container Nor Inducing Laser Light To The Sample, Scan Delay Timer: 15 Sec – 10 Min Sample Size: Able To Detect / Identify Samples From 1 Microgram Traces To Large Bulk Samples Materials Covered: Common Raman Substances, Explosives, Narcotics, Cwas, Tics, Tims, Precursors, Common Chemicals, Fluorescent Materials Not Covered By 785nm Raman: E.g. Colored Materials, Heroin, Colored Mdma Pills, Oils, Npss, Etc., Low Concentration Materials Not Covered By Any Raman Instruments: Lsd, Thc, Magic Mushrooms, Gunpowder, Etc. Raman Excitation Wavelength: 1064nm Minimizes Fluorescence Effects: Allows For Direct Analysis Of Colored/impure Chemicals Through Colored Packaging. Spectral Wavelength Range 200 – 2500 Cm-1 Portability Power: Small Handheld Device, Optimized For One Handed Operation. , 18.5cm-20cm (l) X 15cm-20cm (w) X 7.9cm-10cm (h), 3.65lbs-5lbs (1.65 Kg-2.27kg)., Quantity 2 Lithium Ion Rechargeable Batteries With Battery Life Of More Than 6 Hours Per Charge Per Battery. Cr123a Rechargable Batteries Can Be Used. Including Spare 2 Lithium-ion Battery. Ruggedness Decontamination: Us Mil-std 810g Designed Rugged., Ip 68 Rated For Use In Varying Environmental Conditions And For Complete Decontamination. Operational Temperature Range: Unit Can Be Operated In -20°c To +50°c Temperatures., Withstands Temperature Fluctuations And Humidity Fluctuations. Rapid Start-up Rapid Results: 60 Seconds From Power On To Analysis., Analysis Results In Less Than One Minute. Operational Mode Options: Raman Analysis And Colorimetric Analysis Oraman: • Auto-collect Adjusts Raman Settings Automatically Optimizes Use For Routine Operations • Advanced User Adjustable Raman Settings For Advanced Operators And Custom Library Build: • Laser Power Level 30-490 Mw Adjustable In 5 Mw Increments Exposure Time 5ms To 30s In Increments • Custom Applications Optimize Raman Analysis Parameters Specific To Material Type Ocolorimetrics: • Pouches Including Both Swipes And Colorimetric Chemicals In One Pouch • Pouches For Explosives And Narcotics • General Pouches For Detecting A Wide Range Of Explosives Or Narcotics • Specific Pouches For One Explosive/narcotic Substance Or Substance Group Easy Raman Operation: • Scans In Direct Contact And Through Translucent Plastic Or Glass Containers. • Universal Sample Holder For Analysis Of Samples In Varying Forms And Packaging. • Smartphone Like Touch-screen Interface Or Large Button Activation. • User Prompted Step-by-step Onscreen Analysis Activation. • Typically, 4 Button Presses To Receive Analysis Result. • Onboard System Status Monitoring And Calibration. Reduces Down-time And Necessity For Re-calibration At A Service Depot Analytical Performance: • Liquids, Solids, Powders, Pastes, Gels, Invisible Traces. • Colored Substances And Substances Found In Colored Translucent Packaging. These Types Of Substances Are Most Often Encountered In Real-world Samples. • Comparative Spectral Analysis Overlay Easily Performed Onboard. • User Adjustable Focus Ensures Analysis Of Material And Not The Packaging. • 4c Software Automatically Monitors Results For Combinations Of Precursors Used In Threat, Drug Manufacturing, And Other Recipes. Users Receive Onscreen Alert To Potential Threat Or Clandestine Drug Manufacturing Activity. Library: Raman: • Over 12,000 Substances. • Resq Library Includes The Latest Explosives, Precursors, Cwas, Tics/tims, Narcotics And Psychotropic Drugs, Steroids, Cutting Agents, Pharmaceuticals, Diluents And Pesticides. • Easily Expandable To Add Emerging Threats And Other Substances. • Fleet Management And Library Transfer To Units In The Field. • 4c Library With Explosive, Drug Manufacturing And Other Types Of Threat Manufacturing Recipes. • Library Updates Provided More Than Once A Year Colorimetrics: • General Narcotics Pouches: Multi Drug Test Incl. Fentanyl, Special Opiate Pouch, Cannabinoids • General Explosives Pouches: Chlorates/perchlorates, General Explosives • Specific Pouches: Cocaine, Ephedrine, Heroin, Ketamine, Lsd, Meth/mdma, Mushrooms, Opiates, Pcp, Thc, Ghb Evidence Documentation Traceability: • Onboard 5mp Camera Captures Image Of Sample And Surroundings, As Well As Colorimetric Swab. • Image(s) Stored Along With Analysis Results In Tamper-resistant File. All Analysis Results Are Traceable And Include Unique Date, Time And Serial Number Stamp. • Ability To Activate Password Protect Operator Log-in. Record Of User Associated Activity Stored Onboard And Cannot Be Deleted. Data Access And Transfer Reporting: • View Results In Real Time On Cell Phone Or Tablet, Computer Or Laptop (pc, Ios, Android, Linux) Via Wifi (can Be Disabled). • Exportable Data In Numerous File Formats. • Data Access And Transfer On Computer Or Laptop Via Usb And Wifi (can Be Disabled). • Easy Report Generation. Customer Support Package: • 24/7/ 365 Days Reachback Service For The Life Of The Unit. • Library Updates Provided For The Life Of The Unit. • Software Updates Provided For The Life Of The Unit. • Support: Online, Phone, Email, And In Some Cases Text Message For The Life Of The Unit Cql Complete Package: • Rugged Shipping Case With Custom Foam Insert. • Qty 2 Rechargeable Lithium-ion Batteries. • Cr123a Battery Cartridge (does Not Include Cr123a Batteries). • External Battery Charger. • Ac Power Supply. • Adjustable Base Adaptor. • Universal Sample Holder. • Certified Benzonitrile Performance Verification And Calibration Standard. • Flash Drive Containing User Manual And Supporting Documentation. • Quick Start Guide. • Usb-c To Usb-a Data Transfer Cable. • 1064nm Laser Test Card. • Including Hand Strap And Wrist Strap. . Training: • Comprehensive Onsite Training For An Unlimited Number Of Users. Add-on Accessories And Software: • Periscope Adaptor. • Vial Holder. • Bottle Adaptor. • Integrated Quickdetect Automated Colorimetrics • Detect Trace Quantities Of Non-visible Residues Left On Surfaces: • Explosives And Explosive Precursors • Narcotics Standard Requirements: • Bidder’s Certificate That Will Provide Manual In English Language (2 Copies Of Operator's/user's Manual And 2 Copies Of Service/technical And Maintenance Manual) Upon Delivery. • Brochure/sales Literature. Training Requirements: • Bidder’s Certificate That Will Conduct Free Technical Training And Product Demo For The End-user/s And In-house Biomed On Equipment Operation And On Maintenance Of Equipment. • After Sales Service: Bidder’s Certificate That Parts Shall Be Available At The Authorized Philippine Service Center/s For A Period Of Five (5) Years After The Warranty Period. • Certification From Local Distributor On The Availability Of Service Technicians And/or Biomedical Engineers In Case Of Equipment Breakdown. Preventive Maintenance - • Bidder’s Certificate Free Quarterly Preventive Maintenance During The Warranty Period With Preventive Maintenance Plan. Warranty Certificate: • Warranty Certificate Minimum Of Five (5) Years For Service And Three (3) Years For Parts. The Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Testing And Commissioning. • Calibration: With Certificate Of Calibration Upon Delivery. The Bidder Must Be Iso 9001 And The Manufacturer Should Be Iso 13485 Certified Unit 1 6,900,000.00 14 Common Bile Duct Exploration Supplement Set. Brand New. Product Specifications: Made Of Heavy Duty Stainless Steel. Includes The Following Items: 1 Pc. Randall Kidney-stone Frcpsslt-cvd225mm, 1 Pc. Randall Kidney-stone Forceps Cvd225mm, 1 Pc. Randall Kidney-stone Frcpshvy-cvd225mm, 1 Pc. Randall Kidney-stone Frcps U-cvd225mm, 1 Pc. Bakes Bile-duct Dilator 1mm, Bakes Bile-duct Dilator 2mm, 1 Pc. Bakes Bile-duct Dilator 3mm, 1 Pc. Bakes Bile-duct Dilator 4mm, 1 Pc. Bakes Bile-duct Dilator 5mm, 1 Pc. Bakes Bile-duct Dilator 6mm, 1 Pc. Bakes Bile-duct Dilator 7mm, 1 Pc. Bakes Bile-duct Dilator 8mm, 1 Pc. Bakes Bile-duct Dilator 9mm, 1 Pc. Bakes Bile-duct Dilator 1mm, 1 Pc. Randall Kidney-stone Forcepscvd190mm, 1 Pc. Randall Kidney-stone Fcpshvy-cvd190mm, 1 Pc. Bottom For 1/2 Container Height:135mm, 1 Pc. Prime Line Pro 1/2 Lid Green, 1 Pc. 1/2 Size Perf Basket 243x253x76mm, 1 Pc. Identification Label Green. Set 1 590,000.00 15 Defibrillator. Brand New. Product Specifications: General Features: 7-10 Inch Lcd Display, Maximum Of 3 Waveforms. High Contrast Display Mode For Bright Environments. Ambulance-ready, Rugged Casting: Ip44, Impact Test Of 0.75m. Output Energy: 1-360j. Charge Times Of <3s T O200j, <7s To 360j. Auto-volt With Smart Charging. Lithium-ion Battery Supports To 6 Hours Monitoring/200 Shocks @360j/ 4.5 Hours Pacing, With Built-in Led Power Level Indicator. Lightweight At 4-5kg., Full Configuration, Main Unit. Automatically Switch Defibrillator Energy, Cpr Prompts, And Alarm Limits Depending On Patient Type. Display Ecg During Aed Mode. Ecg Recovery Within 2.5s Or Less. Contact Status Can Be Checked Through Paddle And Monitor, Impedance Value Can Be Checked In Monitor. Auto-testing Includes Maximum Energy Discharge Test. Parameters: 3/5 Lead Ecg, Pacer. Includes: Thermal Recorder, External Paddle Kits, Ecg Cable And Lead Wires, Ecg Electrode, Multifunction Electrode Pad. Printer Paper, Electrode Gel, Power Cord, Lithium-ion Battery. Unit 5 1,500,000.00 16 Dish Sterilizer. Brand New. Product Specifications: − High Light Led Display, − With Special Boiler Temperature Drainage Settings, − Washing (non-recycling) Parameters Can Be Set Free And With Control Memory Function, − Can Meet Different Washing Demand, − Self - Research Internal Water Softener, − Double Construction Design For Top Cover, − Power: 380v/50hz, − Basket Dimension : 500x500mm, − Washing Ability : At Least 60 Basket / H, − Rinse Water Quantity : 3 L/h, − Inlet Height :400-430mm, − Machine Dimension : 800-850x800-820x1450-1500mm, − Rated Power : 14.75kw, − Gross Weight : 140-150, − Net Weight : 100-110, − Packing Size : 890-900x900-910x1630-1700mm. Warranty Period- Within 1 Year Upon Delivery And Installation To Cover Parts (excluding Wearable Parts) And Service With Preventive Maintenance Every 6 Months Within 2 Years Period. Provides Orientation And Training To End-user Representative.* Unit 1 500,000.00 17 Electrocardiography Machine (ecg) Brand New. Product Specifications. High Resolution Lcd Touch Screen, 320-330x240-250vivid Waveform Display. 12 Leads Ecg Resolution Thermal Printer. Built-in Rechargeable Li-ion Battery, Ac/dc Power Supply. Anti-defibrillator And Pace Maker Detection. Complete Digital Filtering, Resisting Baseline Drift, Automatic Baseline Adjustment. Automatic Ecg Measurement And Interpretation. Large Patient Data Storage; 150 Cases, Equipped With Usb Port For Data Transfer. Three (30 Printing Formats (auto, Manual And Rhythm) Selectable. 1/2/3 Channel Ecg Waveform And Rhythm Leads Record Out. Lead Status Diagram Display. Unit 4 200,000.00 18 Electrosurgical Dessicator Machine. Brand New. Product Specifications: Use For Removal Of Lesions, Warts, Skin Tags, And Other Blemishes Easily With Minimally-invasive Treatment. For Superficial Treatments, Safe To Use Around The Eye And Nose Area. Includes Re-usable Pen And Tips. Unit Specifications: Depth:4-5 Inches, Width:8-9 Inches, Height:7-8 Inches, Weight:6-8 Pounds, Output Power -low At 0-20watts (1/10 Watt Increments Up To 10 Watts), High At 0-35 Watts, Bipolar: 0-35 Watts. Offers Hand-or-foot Activated Operation. Autoclavable, Reusable Hand Control Pencil With Power Adjustment Buttons. Pencils Are Designed With Non-spinning Hex Collar For Multi-positional Fall-safe Blade Locking. Equipped With Mobile Stand. Includes Consumables.warranty-6 Months From Delivery And Installation. Set 1 100,000.00 19 Fetal Maternal Monitoring System: Brand New. Product Specifications: Foldable Screen. Probe Rack And Wall Mounting Rack. Handle For Easy Carrying. User-friendly Gui With 3 Display Modes. Four (4) Optional Color Background. Capable Of 24 Hours Ctg Storage. Fast Print For Store Traces. "smart Notes" Annotation. Signals Overlap Verification. Real-time And Offline Data Transmission To Pc. 10-12 Inch Color Touch Screen. Excellent Algorithm. 12-crystal And 1 Mhz Water-proof Transducer For Accurate Detection. Configuration: Dual-fhr, Toco, Fm, Afm, Mecg, Nibp, Mspo2, Temp. Includes: 3 Each Belt, 1 Each Event Marker, 1 Bottle Ultrasound Gel, 1 Ea. Fhr Transducer, Purple, 1 Each Transducer, Yellow, 1 Each Spo2 Sensor, Adult, 1 Each Temperature Probe, Skin, 1 Each Toco Probe, 1 Each Nibp Cuff, Adult, 1 Each Nibp Tube, Adult. Unit 3 1,110,000.00 20 Infusion Pump. Brand New. Product Specifications: Mechanism: Peristaltic Pump, Operating Mode: Flow Rate Mode, Drip Rate Mode(optional), Preset Volume: 1-9999 Ml, Flow Rate Range: 1 – 600 Ml/h, Increment: 1, 10, 100 (ml/h), Accuracy: ± 5%, Kvo Rate: 1 Ml/h, Bolus Rate: 600 Ml/h, Drop Rate Range: 1 – 400 Drop/min With Optional Drip Sensor, Screen: 2.7 Inches B/w Lcd, Information: Flow Rate, Preset Volume, Accumulated Infusion Volume, Completion, Occlusion, Air Bubble, Bed No, Ac Power Indicator, Battery Capacity, Battery Charge Indicator, Iv Set, Etc., Status Indicator: Stop, Run, Bolus, Kvo, Alarm Type: Air Bubble, Finish, Occlusion, No Ac Power, Low Battery, Battery Empty, Reminder To Operate, Communication Error (err1), Operation Error (err2), Drops Error (err3), Handle Open (err4), Air Bubble Level: 1-3 Levels Adjustable, Universal Compatibility, Turn On/off, Occlusion Alarm Pressure Range: 3 Levels: 60kpa, 100kpa, 140kpa (±20kpa), Battery Type: Lithium Polymer, Battery Life: Up To 4 Hours Continuous Operation 25 Ml/h Flow Rate, With Delivery And Installation, Provision Of Trainings Of Staff With Certificates, And Manual. Unit 4 320,000.00 21 Laboratory Oven. Brand New. Product Specifications: Working Temperature Range At Least 5 Above Ambient Temperature To +300 °c; Setting Accuracy Temperature Up To 99.9 °c: 0.1 / From 100 °c: 0.5; Setting Temperature Range +20 To +300°c; Temperature Sensor 1 Pt100 Sensor Din Class A In 4-wire-circuit. Control Cockpit Single Display. Adaptive Multifunctional Digital Pid-microprocessor Controller With High-definition Tft-colour Display; Timer Digital Backwards Counter With Target Time Setting, Adjustable From 1 Minute To 99 Days; Adjustable Parameters: Temperature (celsius Or Fahrenheit), Air Flap Position, Programme Time; Ventilation: Natural Convection, Vent Connection With Restrictor Flap; Works Calibration Certificate : Calibration At +160°c; Door Fully Insulated Stainless Steel Door With 2-point Locking (compression Door Lock); Internals 1 Stainless Steel Grid(s), Electro Polished; Stainless Steel Interior; Interior Easy-to-clean Interior, Made Of Stainless Steel, Reinforced By Deep Drawn Ribbing With Integrated And Protected Large-area Heating On Four Sides; Volume 32 L; Dimensions W(a) X H(b) X D(c): 400 X 320 X 250 Mm; Max. Number Of Internals: 3; Max. Loading Of Chamber 60 Kg; Max. Loading Per Internal 20 Kg; With Free Power Back-up System, With Free Installation And Demonstration. Unit 1 130,000.00 22 Newborn Hearing Screening Test Equipment. Brand New. Product Specifications: • Capable Of Screening And Diagnostic Testing With Te And / Or Dpoae. • Fast Automatic Test With Pass / Refer And Graphical Test Result Display. • Direct Evaluation Via Value And Bar Diagram. • Up To 12 Frequencies Displayed Within The Device, Dp Up To 12 Khz. • 5 Dp / 2 Te Protocols With User Customizable Parameters (diagnostic Version). • High Noise Immunity For Operation In Normal Clinical Environment. • Lightweight, Small Ear Probe. • Environmentally Friendly Due To Long Life, Rechargeable Battery. • Bluetooth Communication To Optional Printer And Pc • Evaluation Of Results In Pc. Screener With At Least 4 Frequency Dpoae Testing Protocols. • Qualified Protocols Built Into The Device. • 4 Dpoae Test Frequencies Reported. • Integration To State Tracking Systems, Hi-track Or Oz. Diagnostic With Up To 12 Frequency Dpoae Testing Protocols. • 1.5 To 12 Khz Frequency Range With Up To 12 Test Frequencies Reported. • Customizable Test Protocols Teoae Available As An Upgradeable Option. Measurement Type: Distortion Product Otoacoustic Emissions (dpoae) Transient Evoked Otoacoustic Emissions (teoae). Frequency Range: Screener Version: Dpoae: 2.0 Khz To 5.0 Khz Teoae: 1.5 Khz To 4.0 Khz. Diagnostic Version: Dpoae: 1.5 Khz To 12.0 Khz Teoae: 0.7 Khz To 4.0 Khz. Stimulus Intensity Range: Dpoae: 40 Db Spl To 70 Db Spl Teoae: 83 Db Spl Peak Equivalent (±3 Db). Microphone System Noise: -20 Db Spl @ 2 Khz (1 Hz Bandwidth)/ -13 Db Spl @ 1 Khz (1 Hz Bandwidth). Dimensions And Weight (unit): 2.5 To 3” W X 1.2 To 1.8” D X 5.5 To 6.5” H 6.2 To 6.8 Oz. Power Supply: Lithium-ion Rechargeable. Battery Life: 1000 Tests Per Charge, Minimum 15 Hours On-time. Connectors/ Communications: Integrated Usb Communication Capability For Battery Charging And Communication With Pc-based Database Programs Or An Optional Printer. Hdmi Connector For Connection To The Micro-probe. Integrated Bluetooth Class 2 + Edr With Spp. Protocol For Communication With Optional Printer. Standard Accessories: Micro-probe, Box Of Single Use Ear Tip And Ear Tip Remover, Package Of Probe Tubes, Micro-usb Power Supply For Charging Lithium Ion-battery, Pc Database Software With Manual, Micro B To A Usb Cable For Pc Communicator/charging, Protective Carrying Case, Data Management Tool That Provides The Ability To Transfer Patient. Oae Test Data From The Testing Device To A Pc For The Purposes Of Viewing, Archiving, Managing And Printing Oae Reports. Using The Database Also Gives You The Means To Create Letter Sized, Detailed Reports That Can Be Easily Filed Or Faxed. You Can Also Create A “paperless” Office By Saving The Test Results As A Pdf For Electronic Filing Or Email. Dpoae: 40 Db Spl To 70 Db Spl Teoae: 83 Db Spl Peak Equivalent (±3 Db). Includes Ups. Warranty –at Least 1 Year After Delivery And Installation. Unit 1 1,000,000.00 23 Operating Room Lights. Brand New. Product Specifications: Dual Head- Ceiling Type. Major Operating Room Light Multi-color. Merging Of Light Fields, Light Intensity Control. Comfortable Display Of Key-pad On Major Lighting Head. Back Light Key Pad Display. Depth And Merging Light Field Should Be Operated At The Sterilizable Handle. Cool Light Temperature Increasing In Head Area: 0.5 ºc. 360° Continuous Rotation Around All Major Joints. Anti-bacterial Coating Head. - Light Head Diameter: 66cm. Ideal Laminar Flow Ceiling System. With Endo Mode: Must Be Color Green Light. Main Light Head. Electronic Light Intensity Control At Lamp Head. - Light Intensity At 1 Meter Distance: 160,000 Lux. Colour Rendering Index Ra At Kelvin: 98 (for Better Quality Image Of Skin, Blood And Tissues). Colour Rendering Index R9 At Kelvin: 99 (for Better Quality Image Of Skin, Blood And Tissues). Focusable Light Field Size: 19-30 Cm. Colour Temperature: 3,750, 4,000, 4,250, 4,500, 4,750 K. - Adjusting The Shadow Activating Via The Touch Panel. - Maximum Of Four Groups Of Lenses Are Dimmed Simultaneously. Shadow Management System. Number Of Led’s: 99 On Lamp Head. Life Span Of Leds: > 60,000 H. Working Distance: 70-160 Cm. Light Intensity Control (standard): 5% - 100%. Outstanding Depth Illumination: 70, 100, 130 Cm. Laser Pointer On Head (main Light Head Only). Lf-index Leenemann: 26. Lf-index Oostlander: 28. Input Voltage: Single Phase 110 ~ 230 Vac Free Volt. Total Power Consumption: 82 - 92watts. Adjustable Brakes At The Horizontal Arm. Light Head Weights: 18.5 Kg. Protection Type Lamp Head: Iec60529. - Aluminum Housing. Satellite Head. Electronic Light Intensity Control At Lamp Head. - Light Intensity At 1 Meter Distance: 140,000 Lux. Colour Rendering Index Ra At Kelvin: 98 (for Better Quality Image Of Skin, Blood And Tissues). Colour Rendering Index R9 At Kelvin: 99 (for Better Quality Image Of Skin, Blood And Tissues). Focusable Light Field Size: 18-30 Cm. Colour Temperature: 3,750, 4,000, 4,250, 4,500, 4,750 K. Number Of Led’s: 69 On Lamp Head. Life Span Of Leds: > 60,000 H. Working Distance: 70-160 Cm. Light Intensity Control (standard): 5% - 100%. Outstanding Depth Illumination: 70, 100, 130 Cm. Input Voltage: Single Phase 110 ~ 230 Vac Free Volt. Total Power Consumption: 82-92 Watts. Adjustable Brakes At The Horizontal Arm. Light Head Weights: 17.9 Kg Minimum. - Aluminum Housing. Protection Type Lamp Head: Iec60529. Standard Accessories: - Sterilized Handle: 2 Pcs/ Lamp Head, - Ceiling Anchorage Ring With Screws, - Spring Arm, - Ceiling Cover, Including Installation Of Brackets To Embed Overhead Ceiling- User Manual, - Ups. Warranty Of Two (2) Years For Parts And Labor With Free Preventive Maintenance Every Quarter Within Warranty Period Five (5) Years Warranty For Led Bulb Only. Unit 1 2,500,000.00 24 Operating Room Table (motorized). Brand New. Product Specifications: Total Length: 2000-2100 Mm. Width Including Side Rails: 600-630 Mm. Mattress Width: 550-570 Mm. Total Weight: 200-210 Kg. Safe Working Load (swl): Up To 250 Kg. Height Adjustment Range: From 595 Up To 1005 Mm. Castors: Four Ø 120-125 Mm Central Locking Twin Castors. Head Section: -58° ... +37°, 135 Mm. Back Section: -10° ... +70°. Leg Section: -80° ... +10°. Lateral Tilt: 20° / 20°. Trendelenburg/anti-trendelenburg: 30° / 20°. Sliding Tabletop For C-arm Function: 300-320 Mm. Flex / Reflex: 220° / 120°. Electrical System: 24 Vdc, Battery Operated, 100 - 240 Vac, 50/60 Hz. Controls: Hand Control And Integrated Control Panel On The Column. Memory Positions: Four Programmable Positions. Visco-elastic Mattresses. Radio Lucent Tabletop For X-ray. Accessories For General Surgery: 1. Arm Rest, 2. Anesthesia Frame With Clamp And, 3. Attachment Clamp. Transport And Storage Conditions: Temperature 7 10° C + 50° C. Relative Humidity 10 %, 85 %. Air Pressure 700 Hpa, 1060 Hpa. Operating Condition: Temperature +10° C, + 40° C. Relative Humidity 30 %, 75 %. Air Pressure 700 Hpa 1060 Hpa. Side Rail Accessories: 25 X 10mm. Warranty-1 Year From Delivery And Installation. Certificate Of Parts Available In The Next 5 Years. Includes Training To End-user. Includes Product Manual. Unit 2 5,500,000.00 25 Radiant Warmer With Phototherapy Units. Brand New. Product Specifications: Fixed Height Radiant Warmer, Mounted On A Column. The Unit Is Supported By A T-shaped Sturdy And Stable Wheeled Base. Bases Is Provided With A Minimum Three (3) Anti-static Swivel Casters. At Least Two (2) Of The Casters Are Equipped With Brakes. The Base Is Equipped With A Side Handle/rail For Easy Positioning. The Design Of The Base Is Suitable To Be Fitted Over Standard Cradles, Cribs, And Bassinets. Overhead Radiant Heater At A Fixed Height Of 1.80-2.0m. Radiant Heating Is Achieved By Quartz/ceramic Elements, Placed In A Parabolic Reflector. The Radiator Is Equipped With A Safety Grid. The Unit Support Three (3) Modes: Pre-heating, Manual And Servo Mode. The Unit Allows For Instant Switching Been The Different Operating Modes. The Minimum Skin Temperature Setting Range Is 32°c To 37°c. The Resolution Of The Temperature Is: ± 0.5°c Or Better. In Manual And Pre-heating Modes Heating Settings Allow For A Range Of 0 – 100%. Led Spotlight(s) For Examination Are Integrated In The Overhead Radiant Heater, The Angle Of The Overhead Light Is Adjustable. Warm-up Time < 30 Min To 25°c. Power Requirements: 1 Ph, 100 - 240 Volts - 50/60 Hz 900 To 1300va (with Ups And Avr). Display Features: The Display Panel Is Integrated In The Column For Visualizing Working Parameters And Alarms. The Display Indicates: - The Current Active Mode: Pre-heating, Manual Or Servo, - The Current Heating Power In Percentages, - The Current Pre-set Temperature, - The Current Actual Skin Temperature, - The Current Air Temperature. The Unit Is Equipped With A Self-check Feature. Alarm And Safety Features: Alarms Are Audible And Visible. Alarms Indicating: - Sensor Disconnection Or Malfunction. - Power Failure. - Skin Temperature, After Stabilizing, Varying Beyond 0.5° To 1°c From Set-point. - 10 To 15 Minutes After Manual Mode Has Been Engaged An Audible Alarm Will Sound. In Addition, The Unit Will Either Reduce Or Cut The Power To The Heater. In Skin Mode, When The Temperature Exceeds 39°c, The Unit Will Cut The Power To The Heater. Supplied With: Instructions For Assembly, Use And Maintenance In English: 1 X Installed And 2 X Spare Reusable Skin Temperature Sensors, Including Connection Cable And Plug. 1 X Spare Quartz/ceramic Heating Element Or The Same With Installed Heating Element. 2 X Spare Examination Light Bulbs. 1 X Set Of Spare Fuses, If Applicable. Accessories: A Durable Light Weight Cradle/crib And Mattress. Oxygen Regulator Including A Pressure Gauge, Flow Meter, Humidifier Bottle And All Required Tubing. Integrated Weighing Scale. Electrically Operated, Slow Suction Unit Including A Vacuum Regulator, Vacuum Gauge And Autoclavable Collection Jar. Electrical Height Adjustment. T-piece Resuscitator. Integrated Phototherapy Unit. Led Phototherapy Unit 36cm: 620-2800μw/c㎡. Led Phototherapy Unit 50cm: 400-1620μw/c㎡. Estimated Life Span: Eight Years. Includes Avr. Unit 3 600,000.00 26 Refrigerator (biological). Brand New. Product Specifications: External Dimension: W = 700-750 Mm D = 730-750 Mm H = 2000-2100 Mm. Inside Dimension: Useful Space On Top W = 600-620 Mm D = 550-570 Mm H = 500-550 Mm. Useful Space At The Bottom W = 590-610 Mm D = 540-560 Mm H = 500-550 Mm. Capacity: 600 L Temperature Range: Top 2°c To 20°c Bottom 2°c To 20°c. Optional: Other Temperature Ranges. Housing Galvanized Sheet Steel With High Quality White Coating, Antibacterial Coated. With 4 Feet, Height Adjustable. Optional: Set Of 4 Casters, 2 With Brakes. Interior Space Inner Case Of Galvanized Sheet Steel With High Quality White Coating, Antibacterial Coated. Cleaning Friendly By Rounded Corners, Slippery Surface In The Interior, Meets Highest Hygiene Requirements Insulation High Density Foamed-in-place Polyurethane, With A Thickness Of 60 Mm. Cfc-free. Circulation Air Cooling For Rapid And Uniform Temperature Control, Reducing Temperature Gradients To A Minimum. When The Door Is ""open"" The Circulating Fan Is Switched Off Automatically By A Micro Switch In Order To Prevent Warmer Ambient Air Being Drawn In. Door 2 Pcs. Three-layer Thermally Insulating Glass Door (arranged On Above The Other), Supplied As Standard With Right Hand Hinge, Also Available With Left Hand Hinge At No Extra Cost. Grease Resistant Magnetic Seal. Optional: With Door Lock. Interior Fittings 4 Pcs. Grating-type Shelves (dim.: 530x550 Mm), White Coated. Interior Lighting With Automatic On/off Micro Switch. Optional: Stainless Steel Shelves Or Stainless-steel Drawer Compartments, With 3 Lengthwise Dividers With Telescopic-type Guides On Rollers With Stops, Drawer Dimensions: 500x480x77 Mm (wxdxh) Usable With Between The Lengthwise Dividers: 106 Mm (lengthwise Dividers Easily Removable). Working Range 1 From 2°c To 20°c (assuming The Ambient Temperature Is Approximately 4°c Above The Set Point). Temperature Accuracy +/- 1,8°c After Stabilization (with 50% Of Loading). Acoustics Signal When The Set Value Is Undercut Or Exceeded Potential-free Connection Socket For Extern Alarm Refrigerating Unit 2 Pcs. Fully Hermetically Sealed, Forced Ventilation, Fitted On Vibration – Absorbing Mounts (ambient Temperature Max. 32°c), Low Noise (48dba/1m), Energy Saving Compressor With High Quality Vaporization System. Refrigerant: R 290 Or Equivalent Defrost Automatically With Thermal And Time Limit. Condensate Evaporation In Heated Tray. During The Defrost Period, The Temperature Inside The Cabinet (only The Air Temperature – Not The Stored Goods) Will Arise For A Short Time. Electrical Date: Power Supply220-230 V/50 Hz/single Phase Optional: 60 Hz. Power Input 2x 0,20 Kw. Fuse 16a. Power Cable: 2x 1,5 M. Packing Details (palletized) Dimensions: Approx. 85x98x224 Cm. Net Weight: 150-170 Kg. Gross Weight: 180-200 Kg. Include Avr. Unit 1 100,000.00 27 Rigid Video Procto-sigmoidoscope. Brand New. Product Specifications: Plastic Obturator. Video Camera. Stainless Steel Tube. Handle Of Polyacetal (delrin), Usb Male Connector. Analogue To Digital Converter Nozzle For Gas. Instrumentation Channel. Silicone Washer. Includes Universal Fiber Optic Light Source Machine And Tube Connector From The Proctoscope To The Light Source Machine. Warranty -6 Months From Delivery And Installation. Set 1 50,000.00 28 Stretcher, Transport Type. Brand New. Product Specifications: Hydraulic Stretcher. Numbers Of Function: Five-function. Certification: Ce, Fda, Iso13485. Size: 2000-2100 Mm (l)*770-800mm (w)*600-610/900-920mm (h). Height:600mm-930mm. Lowest Position-floor To Platform-580mm. Highest Position-floor To Platform-905mm. Side Rail Height Above Mattress Platform-340 To 360mm. Maximum Back Rest-0-80 Degrees. Maximum Knee Rest-0-30 Degrees. Maximum Trendelenburg Reverse Tr-0-16 Degrees. Mattress Size -1850-1880 X 650-670 X 80-90mm. Loading Capacity -up To 200 Kg. Side Rails: Collapsible Aluminum Alloy Side Rails. Bed Platform: X-ray Transparent. Specification: Ce, Fda, Iso. Other Features: 1. Central Brake System: Equipped With Four Brake Pedals On All Sides Of The Bed Make The Brakes At The Optimal Position Effectively. 2. Multi-function Instrument Support: The Instrument Support Can Put The Monitor And Can Also Be Used As A Headboard To Prevent Accidental Slippage Of The Patient. 3. Push Handle: Reducing The Workload And Preventing The Injuries. 4. High Quality Mattress: The European Standard Waterproof Cloth With The Smooth Surface Of The Mattress, Easy To Clean And Not Misplaced. 5. Large Diameter Wheel: Using The Imported 8-inch Silent Caster Make It Flexible And Durable. 6. The Fifth Wheel: The Fifth Wheel Can Provide A Smaller Radius Of Gyration. The Telescopic Collapse Design Can Slide Smoothly Even On The Rough Surface Or Obstacles Such As The Elevator Sill, Reducing Effectively The Damage Caused By Transport To Patients. 7. Plastic Coated Side Rails: The Side Rails With Stainless Steel Column Guardrail Covers Almost Entire Length Of Bed. 8. High-strength Carbon Steel Structure And Spray Procedure: The High Quality Carbon Steel And Robot Welding Guarantee The Mechanical Strength. The Spray Surface Treatment Is Easy To Clean And Guarantees A Longer Life. 9. Rapid Lifting Hydraulics: The Imported Dual-pressure Lifting System Can Be Used To Quickly Lift The Bed Or The Push Handle For 2 Seconds In An Emergency, And The Bed Will Automatically Locate The Height To Form A Special Body Position Of The Patient. 10. X-ray Imaging: Equipped With X-ray Material Bed Surface And X Ray Cassette Holder, The Whole Body Can Be X-rayed. 11. With Oxygen Cylinder Holder. Warranty -1 Year From Delivery And Installation. Unit 18 5,400,000.00 29 Suction Machine. (heavy Duty). Brand New. Product Specifications: Floor, Standing Type. Oil-less Piston Suction Motor. Double Anti-overflow Protection (mechanical Float And Electronic Sensor). Flow Rate: 40-50 Liter Per Minute. Water Displacement. Vacuum -700-800mmhg. Includes 2x3 Liters Polycarbonate Collection Jar. Attach/detach Abs Plastic Cover Jar. Anti-bacterial And Hydrophobic Filter. Patented Anti-vibration System. Dimensions: 300-400mm X 380-420mm X 800-850mm (lxwxh). Weight -15-25 Kg. Equipped With Foot Switch. Power -250w. Power Requirement -ac 200, 50-60hz. Silicone Hose. Operation And Service Manual Included. Warranty Of 6 Months From Delivery And Installation. Includes Orientation And Training Of End-user Staff. Unit 2 600,000.00 30 Syringe Pump. Brand New. Product Specifications: With Delivery And Installation, Provision Of Trainings Of Staff With Certificates, And Manual.  Applicable Syringes (universal Compatibility To Various Brands): 10ml, 20ml, 30ml, 50ml/60ml, Accuracy: ±2% (mechanical ±1%).  Flow Rate: 10ml: 0.1 Ml/h -300ml/h, 20ml: 0.1 Ml/h -600ml/h, 30ml: 0.1 Ml/h -900ml/h, 50ml: 0.1 Ml/h -1500ml/h.  Bolus Rate: 10ml: 100-300ml/h (default 300ml), 20ml: 100-600ml/h (default 600ml), 30ml: 100-900ml/h (default 900ml), 50ml: 100-1500ml/h (default 1500ml).  Purge Rate: 10ml: 300ml, 20ml: 600ml, 30ml: 900ml, 50 Ml: 1500ml.  Volume To Be Infused: 0.1ml~1000ml.  Injection Increment: 0.1ml.  Infusion Mode: Rate Mode, Time Mode.  Time Mode: Volume Limit: 0.1~999.9ml. Pre-set Time: 1min To 99h99min. Remaining Time: **h **min.  Occlusion Pressure: 3 Adjustable Occlusion Pressure Settings: Low, Middle And High.  Alarm Function: Infusion Completion, Near Completion, Empty, Occlusion, Low Battery, Syringe Disengaged, Incorrect Installation Of Syringe Plunger, No Ac Power Supply, Low Battery, Battery Exhausted, Malfunction Etc.  Battery: Rechargeable Lithium Polymer Battery, 7.4v, 2100mah, Can Operate For More Than 3 Hours After Fully Charged At 25ml/h. Unit 5 300,000.00 Total 34,665,000.00 Note: Winning Bidder Shall Conduct Product Demonstration/end-user’s Training Of The Actual Unit And Issue Training Certificate To The End-user And Medical Equipment Technician Of Wvsgh. The Bidder’s Single Largest Completed Contract Similar To The Contract To Be Bid Should Have Been Completed Within 3 Years From The Date Of The Deadline Of Submission And Receipt Of Bids, Award For This Contract Should Have Been Awarded By A Hospital Or Health Facility And Not By Another Supplier, Except For Line Items With Asterisk (*) Which Have Been Awarded By A Non-health Facility. Likewise, The Contract Price Of The Slcc Should Be At Least 50% Of The Sum Of The Abc Of The Line Items Joined. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184. The Complete Schedule Of Activities Is As Follows: Bac Activities Schedule Availability Of Bidding Documents December 12, 2024 At 8:00 Am To 4:00 Pm And Up To Before 9:00 Am Of January 7, 2025, At The Procurement/bac Office, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Pre Bid Conference December 20, 2024 (thursday), 9:00 Am At The 3rd Floor, Im Conference Room, New Building, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Opening Of Bids January 7, 2025 (tuesday), 9:00 Am At The 3rd Floor, Im Conference Room, New Building, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Bid Documents May Be Acquired By Interested Bidders On The Dates And Address Above And Upon Payment Of Applicable Fee For The Bidding Documents In The Amount Of: Php 25,000.00 Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bac/procurement Office On Or Before 9:00 Am Of January 7, 2025. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Wvs.doh.gov.ph , Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Western Visayas Sanitarium And General Hospital Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Mr. Jasond Rex A. Huyaban/jessie H. Jarbadan Bac Secretariat Western Visayas Sanitarium And General Hospital Sta. Barbara, Iloilo Tel. No.: (033) 332-4778 Loc. 119 Email: Wvsbac.procurement@gmail.com Website: Wvs.doh.gov.ph Renia Grace G. Salapare, Md, Fpafp, Mpa Bac Chairperson

Details: This Request For Information (rfi)/sources Sought disclaimer this Rfi Is Issued Solely For Information And Planning Purposes Only And Does Not Constitute A Solicitation. All Information Received In Response To This Rfi That Is Marked As Proprietary Will Be Handled Accordingly. Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Associated With Responding To This Rfi. the Submission Of Pricing, Capabilities For Planning Purposes, And Other Market Information Is Highly Encouraged And Allowed Under This Rfi In Accordance With (iaw) Far Part 15.201(e). sources Sought Description this Is Not A Solicitation Announcement. This Is A Rfi/sources Sought Only. The Purpose Of This Sources Sought/rfi Is To Gain Knowledge Of Potential Qualified Sources And Their Size Classification Relative To Naics 561621. Responses To This Sources Sought Will Be Used By The Government To Make Appropriate Acquisition Decisions. After Review Of The Responses To This Sources Sought, A Solicitation Announcement May Be Published. Responses To This Sources Sought Synopsis Are Not Considered Adequate Responses For A Solicitation Announcement. the Department Of Veterans Affairs (va), Visn 15 Network Contracting Office, Is Seeking Sources That Can Provide The Following: contractor Shall Provide The Maintenance Of The Va Police Security System And Repair The Security System As Required By The Statement Of Work (sow) At The Va Medical Center, St. Louis, Missouri (herein After Referred To As Vamc). the Vamc St. Louis Has Two Divisions Located As Follows: John Cochran Division (jc), 915 North Grand Blvd., St. Louis, Mo 63106 And Jefferson Barracks Division (jb), #1 Jefferson Barracks Drive, St. Louis, Mo 63125. it Is The Responsibility Of The Interested Source To Demonstrate To The Government That The Interested Parties Can Provide The Supplies/services That Fulfill The Brand Name. if You Are Interested And Are Capable Of Providing The Sought-out Services, Please Provide The Requested Information As Well As The Information Indicated Below. Response To This Notice Should Include Company Name, Address, Point Of Contact, Size Of Business Pursuant To The Following Questions: please Indicate The Size Status And Representations Of Your Business, Such As But Not Limited To: Service Disabled Veteran Owned Small Business (sdvosb), Veteran Owned Small Business (vosb), Hubzone, Woman Owned Small Business (wosb), Large Business, Etc.)? is Your Company Considered Small Under The Naics Code Identified Under This Rfi? are You The Manufacturer, Distributor, Or An Equivalent Solution To The Items Being Referenced Above? if You Re A Small Business And You Are An Authorized Distributor/reseller For The Items Identified Above Or An Equivalent Solution, Do You Alter; Assemble; Modify; The Items Requested In Any Way? If You Do, State How And What Is Altered; Assembled; Modified? does Your Company Have An Fss Contract With Gsa, Va Nac, Nasa Sewp, Or Any Other Federal Contract, That Can Be Utilized To Procure The Requirement Listed Above? If So, Please Provide The Contract Number. please Submit Your Capabilities That Show Clear, Compelling, And Convincing Evidence That You Can Meet The Requirement Described Above. please Provide Your Uei Number. responses To This Notice Shall Be Submitted Via Email To James Hogue At James.hogue@va.gov. Telephone Responses Shall Not Be Accepted. Responses Must Be Received No Later Than Wednesday, February 5th At 1700 Cst. If A Solicitation Is Issued It Shall Be Announced At A Later Date, And All Interested Parties Must Respond To That Solicitation Announcement Separately From The Responses To This Sources Sought. Responses To This Sources Sought Notice Are Not A Request To Be Added To A Prospective Bidders List Or To Receive A Copy Of The Solicitation. statement Of Work security System Maintenance i. Description this Service Contract Requires The Furnishing Of All Labor, Material, Equipment, Supervision, Management, Tools, Transportation, And Supplies For The Complete Maintenance And Corrective Maintenance Services To The Security System At The John Cochran (jc) Division And Jefferson Barracks (jb) Division Of The Va Medical Center (vamc), St. Louis, Missouri. a. Contractor Shall Furnish All Labor For Normal, Routine And Emergency Maintenance, 24 Hours Per Day, 365 Days A Year. b. The Contractor Is Responsible For Providing Field Updates To As-built Drawings And Associated Documentation As Tests And Maintenance Is Performed. The As-built Drawings Will Be Provided By The Vamc For The Entire Security Alarm System For The Equipment Listed In Table Nos. 1 Through 31 Of This Document. c. All Material Used In The Course Of Normal, Routine And Emergency Corrective Maintenance, Testing And Inspections Are Included; Except See Vandalism, Paragraph Iii. All Parts Shall Be Of Current Manufacturer And Shall Have Full Versatility/compatibility With Presently Installed Equipment. All Replacement Parts For Access Control Must Be Fips 201 Compliant. Stl Va Is Currently Using A 75-bit Card For The Va Piv Credential. d. Any Material Provided Outside This Contract For Adds, Moves, Changes, Act Of God, Etc., Will Be Provided To The Vamc At The Contractor S Preferred Customer Rate For Labor And Materials. e. In Addition; The Contractor Is Required To Provide The Below Listed Administrative Duties For The St Louis Medical Center: (1) Create C*cure Reports Requested By The Various Services. Update Schedules Of Reports And Report Parameters. Update Reports As Equipment Is Added Or Deleted. Approximately 3 Hours Per Month. (2) Add And Delete C*cure Operators As Needed. Minimal Amount Of Time (maybe Once Every Three Months) (3) Manage Active Directory To Include Adding And Deleting Users And Resetting Passwords. Minimal Amount Of Time (maybe Once Every Three Months) (4) Maintain Cisco Equipment For Campus Interconnection. (5) Provide Preventative Maintenance On Access Control, Video And Intercom System To Reduce Downtime Of Same. Minimum Of 16 Hours Per Week. (6) Will Be Required To Maintain A Bench Stock Of Spare Parts Provided By The Va Medical Center To Be Used In Emergency Situations (7) Will Be Required To Maintain Four Client Pcs And Four Servers, Including Keyboards, Mice And Speakers. (8) As New Buildings Come Online Under The Jb And Jc Major Construction Projects The Contractor Will Be Responsible For The Initial Entry Of All The Security Related Hardware (to Include Istars, Card Readers, Receivers, Relays, Duress Buttons Etc.) In The Master Application Server And The Satellite Server. In Addition; The Contractor Will Be Responsible For Adding All The New Video Surveillance Equipment Into The March Networks System ii. Quality Control: all Employees Of Vendor And Subcontractors Working On Site Shall Comply With Va Security Management Program And Obtain Permission Of The Va Police, Be Identified By Project And Employer, And Restricted From Unauthorized Access. All Contractors Who Work On Site Must Have A Photo Id Badge Issued By The Va Police. Applicants For An Id Badge Will Be Required To Provide Personal Data And Undergo A Background Check. contractor S Service Technicians Used To Meet The Requirements Of A-e Below Shall Reside Within A 1.25-hour Radius Of The Spot Located Directly Between The Two Locations: a. Contractor Shall Be Capable Of Providing At Least Six (6) Employees Factory Trained And Certified In The Software House Ccure 9000, And No Less Than Three (2) Employees Who Have Successfully Passed The Software House Ccure 9000 Advanced Integrator Certification. b. Contractor Must Have One (1) Or More Software House Ccure 9000 Enterprise Architecture Certified Technicians, Competent In The Commissioning, Programming And Maintenance Of A Ccure 9000 Mas/sas Configuration. c. Contractor Shall Be Capable Of Providing At Least Six (6) Employees Who Are Factory Trained And Certified In The March Networks R5 Platforms. d. Contractor Shall Have At Least One Employee Who Is Factory Certified In The Stentofon Alphacom Intercom System. e. The Contractor Shall Have At Least Two Employees Who Are Factory Certified On The Salto Locking Computer Software Program, And The Associated Hardware Installed. f. The Contractor Shall Insure That They Have At Least One Certified Technician Available 24/7 365 Days A Year That Lives Within A 1.25 Hours Radius Of Both The Jc And Jb Campus . iii. General Maintenance Requirements: system Components: the System Includes Components Of The System, Both Audio And Visual, Including But Not Limited To Motion Detectors, Wiring, Circuitry, Duress Buttons, Electronic Cameras, Monitors, Nvr S, Switches, Alarms, Card Readers, Computers, Boards, Intercoms, Equipment For Data Transmission And Storage And Other Items Described Herein At The Jc And Jb Divisions Of The Va Medical Center. all Components And Accessories Of The System Will Be Covered Under This Service Contract. all Systems Shall Be Left Functional At The Close Of Each Workday. a. Network all Devices Supported As Part Of This Contract Reside On The Security Network. This Includes But Is Not Limited To Fiber Optics Converters, Switches, Ups S, Csu/dsu S And All Other Devices To Make A Complete And Working, Full Gigabit Backbone, Security Network. The Network Includes The Link Between Campus Dedicated To Use By The Security Systems. b. Access Control System the Access Control System Is A Ccure 9000. this Includes, But Is Not Limited To: Access Control Panel, Panel Power Supplies, Lock Power Supplies, Card Reader, Request To Exit Devices, Door Position Switches And Electronic Locking Hardware. electronic Locking Hardware Including Maglocks, Electric Strikes, Electrified Locksets, Delayed Egress Hardware, Electric Latch Retraction, And Electric Trim Devices. the System Is Used To Monitor Certain Alarms. Devices To Monitor These Alarms Include Wireless Receivers, Transmitters, Specialized Contacts And Motion Detectors. the Contractor Will Be Required To Keep The Ccure 9000 System Properly Licensed And Under A Software Support Agreement With The Factory, Maintaining At Least The Current Level Of Licensure. A Copy Of The License Details Is Available Upon Request. The System Includes A Configuration Of One Mas And Two Sas S Both With Bidi Interface. This Will Require License Renewal On An Annual Basis. c. Cctv System: coverage Of The March Network Cctv System Shall Be Part Of This Agreement. This Includes The Network Video Recorders (nvrs), Encoders, Wireless Transmission Equipment, Ethernet Transmission And Extenders, Switches, Camera Power Supplies, And Camera. cameras Consist Of Indoor, And Outdoor, Fixed And Ptz, As Well As Analog And Ip. d. Intercom there Are Four Different Intercom Systems In Use That Will Be Covered Under This Maintenance Agreement. A Bogen Intercom System Covering Seven Doors At Jc, Six Aiphone Door Intercom Systems (total For Both Campuses), A Stentofon All Ip Intercom System With Six Intercom Stations, And Six Emergency Phone Intercom Stations. e. Security Servers And Workstations multiple Pcs And Servers Make Up The Security System. These Include Three High Availability Enterprise Servers Built And Tuned Specifically For Operation With Ccure 9000. These Servers Include Raid Redundancy, Dual Power Supplies And All Required Windows Server And Sql Licensing. Two High End Workstations Are Used For The Dispatch Function And Are Each Capable Of Driving Up To Eight High Resolution Large Format Monitors. Two Badging Workstations With Associated Cameras And Pvc Card Printers Are Also A Part Of The System. As A Part Of The Servers And Workstations, Lcd/led/plasma Monitors Are In Use. Of Particular Note Are The Eight Large Format Monitors; Five At Jc And Four At Jb. the Contractor Will Be Responsible For Providing Their Own Service Workstations As Desired; However, At A Minimum, At Least One Service Workstation Shall Be Provided For The Jb Campus (this Workstation To Remain The Property Of The Contractor). g. Stand Alone Locking System a Salto Hotel Style Access Control System Is Used In The Fisher House Bldg.#59 And The Domiciliary Bldg.#3 At The Jb Campus. Salto Readers Are Battery Operated And Requires To Be Monitored And Batteries Need To Be Replaced Approximately At The 2/3 Of The Rated Duty Cycle. Full Support Of The System Must Be Included. i. As-builts (record) Drawings: After Contract Award, The Contractor Will Be Provided With The Vamc As-built Drawings For The Entire Security Alarm System For The Equipment Listed In Table Nos. 1 Through 28. Engineering Service Will Provide The Initial Computer Disk Of As-built Drawings For The Contractor To Maintain And Update. These Drawings Are Not Completely Accurate. The Contractor Is Responsible For Providing Field Updates To The Drawings As Tests And Maintenance Is Performed. Up To Date As-builts Shall Be Submitted Every Four (4) Months On Autocad Version 12 To The Contracting Officer Representative (cor). ii. Maintenance Manuals: Maintenance Manuals Shall Be Provided And Include Original Manufacturer S Catalog Cuts On All Equipment Installed, Internal Wiring Diagrams Showing Points Of Connection, Terminal Points Wiring Color Code And Tag Notation, As Well As Instructions For Troubleshooting The System In The Event Of A Malfunction. In Addition To The Operating And Maintenance Manuals, A Complete Materials List Of Systems, Including The Address And Phone Numbers Of The Local Supplier Of Each Item Shall Be Provided. The Maintenance Manuals Shall Be Submitted To The Cor Every Four (4) Months Along With The As-builts. iii. Vandalism: Vandalism Is Defined As Renewals Or Corrective Maintenance Necessitated By Reasons Of Negligence Of Misuse Of The Equipment By Persons Other Than The Contractor, His Representatives And Employees, Or By Reason Of Any Other Cause Beyond The Control Of The Contractor, Except Normal Wear And Tear. Claims For Additional compensation For Repair Of Vandalism Will Be Considered Upon Presentation Of Satisfactory Evidence That Vandalism Has Occurred. During Normal Working Hours, The Contractor Shall Contact The Cor Or His Designee And Have Them Verify The Damage Prior To Repair Of Vandalism. During Off-duty Hours, The Contractor Shall Contact Police Service To Verify That The Damage Will Be Noted On The Service Ticket As Repair Of Vandalism. All Parts Replaced Due To Vandalism Shall Be Returned To The Government. If The Contractor Is Called To Make Corrective Maintenance Identified As Vandalism And So Noted, Billing Will Be For Time Spent At The Vamc Only. Travel Time And Expenses Will Be Charged. iv. Acts Of God. Corrective Maintenance Necessitated By Reason Of Acts Of God Will Be Processed In The Same Manner As For Vandalism. v. Malfunctions: All Malfunctions Located During Inspection/maintenance And Repair Shall Be Reported To The Cor. The Report Shall Include A Narrative Of Malfunction And The Recommended Method Of Correction. The Government Requires Problems To Be Corrected Within Twenty-four (24) Hours Of Being Identified In Addition To The Required Documentation. vi. Report Of Services 1. During Normal Working Hours, 8:00 To 4:30 P.m., Monday Through Friday, The Contractor Shall Report To Va Police Operations Center At The Jc Division And The Officer S Work Area Bldg. #1 Jb Division To Sign In And Out. Contractor Shall Then Notify The Cor, Police Service As To The Repair Being Made Or Maintenance Performed. Contractor Shall Also Notify Them Before Leaving, And Advise The Cor On The Status Of System. 2. During Off-duty Hours, 4:30 P.m. Through 8:00 A.m., Monday Through Friday, Holidays And Weekends, The Contractor Shall Report To The Va Police Operations Center At Jc Division And Va Police Officer S Work Area, Bldg. #1 At Jb Division To Sign In And Out. Contractor Shall Then Notify Police Service (on-duty Supervisor) As To The Repair Being Made Or Maintenance Performed. Contractor Shall Also Notify Police Service (on-duty Supervisor) Before Leaving, And Advise Supervisor On The Status Of System. 3. Failure Of The Contractor To Report Before And After Performing A Repair Or Maintenance Work Shall Be Cause For The Va To Withhold Monthly Payments. iv. Maintenance/corrective Maintenance: a. Maintenance Services: Maintenance Is To Be Provided To All Equipment And Components Listed Herein: 1. The Contractor Shall Make Thorough Technical Inspections Of Equipment And Perform Necessary Maintenance In Accordance With Manufacturer S Recommendations And Commercial Practices Governing Maintenance For This Type Of Equipment. 2. All Equipment Including All Components And Accessories Shall Be Cleaned, Inspected, Adjusted, Calibrated, And Tested Prior To The Inspection Scheduled For Sixty (60) Days From Date Of Contract Award. 3. After The Initial Servicing Sixty (60) Days From Contract Award, All Equipment Will Be Cleaned, Inspected, Calibrated And Tested Once Every Twelve (12) Months, With The Exception Of The Pan Tilt Zoom Cameras Which Will Be Cleaned, Inspected, Calibrated And Tested Once Every Six (6) Months. Prior To The Commencement Of Work, The Contractor Shall Submit To The Cor, A Preventive Maintenance Schedule For All Devices Along With Procedures. b. Inspection: 1. Va Medical Center Representatives (police Service) And A Representative Of The Contractor Will Jointly Inspect The Security System And All Components To Verify That All Systems Have Been Properly Maintained And Are Functioning In The Manner For Which They Are Intended. This Inspection Will Take Place In The First Month Of Performance Of This Contract And The Anniversary Month In Subsequent Years. The Contractor Shall Demonstrate At This Time That All Components Of The System Are Functioning Properly And State The Type Of Preventive Maintenance That Has Been Performed On The Equipment. 2. Within Ten (10) Calendar Days After Inspection Conclusion, The Contractor Shall Submit A Written Report (original And One Copy) To The Cor Citing The Components Inspected, Working Condition And Preventive Maintenance Performed To Date. The Report Will Be Completed In Accordance With The Provisions Of Paragraph Iv, Subparagraph D., Reporting. 3. When A Problem Has Been Identified As Caused By Lack Of Training Or System Knowledge Of The Vamc Staff, Contractor Shall Furnish Appropriate Information In Writing Or Verbally To Educate User Or Users As To Appropriate Procedures To Follow To Prevent Reoccurrence. Training For User Error And Technical Advice That Is Provided By Phone, Correspondence Or Personal Instructions Are Considered Part Of This Service Contract. 4. Reprogramming Of Software Due To Memory Loss, Software, And Firmware Updates Are Considered Part Of This Contract. 5. Time Spent By Service Contractor In Travel And Diagnostic Time For Assessing Cause Of System Failure Or Problem Is Considered Part Of This Service Contract. Once It Is Determined That The Problem Is Outside The Contract, Time And Material Spent To Repair Or Replace Components Of System Are Considered Additional Billable Items. A Quick And Accurate Diagnosis Is In Everyone S Best Interest. Proper Authorization Will Be Required. No Work Can Proceed Until A Purchase Order (p.o.) Number Is Issued. 6. If Door, Hardware, Or Other Component That Is Not Part Of Security System Needs Adjustment Or Replacement, Contractor Shall Have To State Corrective Action Needed To The Cor. The Necessary Security System Corrective Maintenance Shall Be Accomplished After Medical Center Personnel Have Completed Their Repair Work (diagnostic Time Is Part Of The Contract). 7. Assistance At The Head End Equipment Will Be Provided By The Va Police Supervisor While Preventive Maintenance Is Being Provided By The Contractor. Assistance Of The Va Police Supervisor Must Be Prearranged And Coordinated By The Contractor. c. Response To Calls For Repair Service 1. Emergency Corrective Maintenance: A Repair Person Shall Be On The Premises And Provide Corrective Maintenance /trouble Shooting Initiated Within Two (2) Hours After Receipt Of An Emergency Call. 2. The Alarms For The Following Facilities/areas Have Been Assigned A Security Classification Of Critical/highly Sensitive. Trouble Alarms In Either Of These Categories Require A Two (2) Hour Response Time As Specified In C.1. jc Division (a) Methadone Dispensing Area Bell Street Clinic (b) Agent Cashier Area Room B102f Bldg. 1 (c) Canteen Safe Area Room C303 Bldg. 1 (d) Bldg. 3, Irm Area 1st Floor Bldg. 3 (e) Inpatient Pharmacy Room B405 Bldg. 1 (f) Pharmacy Cache 2nd Floor Bldg. 1 (g) Emergency Room Doors Er Bldg. 1 (h) More Than 3 Istar Failures Bldg. #1 (patient Care Areas) (i) C*cure Computer Failure Room C106 Bldg. 1 jb Division (a) Pharmacy Outpatient Room 1c22 Bldg. 55 (b) Pharmacy Cache Room 1c35 Bldg. 55 (c) Agent Cashier Room 1b105 Bldg. 55 (e) Canteen Retail Office Section Room G010 Bldg. 24 (f) Pharmacy Bldg. 55 (g) Mental Health Sally Port Doors Wards N1, N3 West Bldg. 51 (h) C*cure Computer Failure Room 1e08 Bldg. 1 (i) Failure Of The Mas Or Sas Room 1e11a Bldg.1 3. Non-emergency (routine) Corrective Maintenance: All Other Areas Not Classified As Critical/highly Sensitive When Reported, Shall Be Considered Non-emergency (routine) corrective Maintenance. A Repair Person Shall Be On The Premises And Initiate Repair/trouble Shooting Within One (1) Working Day After Receipt Of A Routine Maintenance Call. In No Instance Should Any Component Remain In A Fault/non-operational Status Exceeding Two (2) Working Days. 4. Failure Of The Contractor To Respond To The Requirements Of Emergency Call Back Period Within Two (2) Hours And To Non-emergency Corrective Maintenance Within One (1) Working Day, May Be Cause For Termination Of This Contract For Cause When Two (2) Occasions Of Non-compliance Occur. 5. If This Contract Is Terminated Because Of Contractor S Failure To Provide Services In Accordance With Contract Requirements, Payment Will Be Made For The Contractor S Services That Have Been Provided Through The Termination Date. No Payment Will Be Made For Any Scheduled Maintenance Services That Have Not Been Provided By The Contractor Prior To Termination Of This Contract. d. Reporting 1. At The Completion Of Each Test, Repair And Maintenance Service, The Contractor Shall Provide A Verbal Report To The Cor Or His Designee On Duty Of Any Devices Or Systems That Were Found Not To Operate Properly Before Leaving The Medical Center. This Includes Location, Problems That The Malfunctioning Device May Cause, And Date When Corrective Maintenance Will Be Completed. 2. Written Reports: On Completion Of Each Inspection And Maintenance Service, The Contractor Shall Furnish A Written Report, Within Ten (10) Calendar Days Of Completion Of The Maintenance Or Inspection. Report Shall Be Legible And Provide, As A Minimum, The Following Information: date Of Service location Of Service exact Component type Of Service service Performed (t-test, C-clean, A-adjust, Cal-calibrate, L-lubricate). final Condition Of Device (wp-working Properly, Mal-malfunctioning, Etc.) inspector Or Inspectors Initials 3. Failure Of The Contractor To Report Before And After Performing A Repair Or Maintenance Work Shall Be Cause For The Va To Withhold Monthly Payments. 4. Statement Of Power Related Problems By The Contractor Shall Be Substantiated By Documentation Utilizing The Appropriate Power Recording Equipment. The Contractor Must Also Present Information From The Manufacturer That The Recorded Conditions Would Cause Problems With The Equipment Before It Is Determined That Corrective Maintenance Is Not Covered By The Contract. e. Acceptance By Contractor: Contractor Shall Accept The Existing Security System, All Accessories And Components, Listed Herein, In Its Present Condition And Shall Maintain Such System In Strict Conformance With The Specification Requirements. The Following List Of Components Is Intended As A Guide To The Equipment Covered Under This Contract. Note That These Quantities May Be In Error By As Much As + Or 10%. The Specific Location Of Each Device Is Listed In Table Nos.1 Through 28 Of This Document. v. Emergency Calls: Contractor Shall Be Required To Have An Answering Service To Relay And Dispatch Emergency Calls. No Separate Phone Numbers Or Beeper Numbers Other Than The Main Company Number Will Be Accepted For Service Requirements. vi. Quality And Performance Standards: All Performance Under This Contract Must Be Of High Standards And Must Conform To Good Trade Practices. All Service Under This Contract Shall Be Rendered Promptly And Efficiently Upon Receipt Of An Official Order. All Work To Be Performed Under This Contract Is Subject To Inspection By The Va To Insure Compliance With All Terms And Conditions Of This Contract. vii. List Of Tables: See Section D Attachments. table No. Description 1 John Cochran Building #1 2 John Cochran Building #2, 2a, 2b 3 John Cochran Building #3 4 John Cochran Building #4 5 John Cochran Building #6 6 John Cochran Building #7 7 John Cochran Building #5t 8 John Cochran Building #1t 9 Jefferson Barracks Building #1 10 Jefferson Barracks Building #24 11 Jefferson Barracks Building #23 12 Jefferson Barracks Building #51 13 Jefferson Barracks Building #52 14 Jefferson Barracks Building #53 15 Jefferson Barracks Building #18 16 Jefferson Barracks Building #3 17 Jefferson Barracks Building #3t 18 Jefferson Barracks Building #56 19 Jefferson Barracks Building #25 20 Jefferson Barracks Building #75 21 Jefferson Barracks Building #55 22 Jefferson Barracks Building #54 23 Jefferson Barracks Building #57 24 Jefferson Barracks Building #58 25 Jefferson Barracks Building #60t 26 Jefferson Barracks Building #60 27 Jefferson Barracks Building #55 28 Jefferson Barracks Fisher House #59 29 Jefferson Barracks Building #2

Details: Description Republic Of The Philippines Province Of Surigao Del Norte Municipality Of Gigaquit Invitation To Bid For Supply & Delivery Of Common Use Supplies And Equipment For The First Quarter 2025. 1. The Municipality Of Gigaquit, Through The General Fund Intends To Apply The Sum Of One Million Six Hundred Thirty Three Thousand Seven Hundred Seventy Nine Pesos & 10/100 (php 1,633,779.10) Being The Abc To Payments Under The Contract For Supply & Delivery Of Common Use Supplies And Equipment For The First Quarter 2025. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Lot No. 1 Abc Php 495,960.10 – Various Common Use Office Supplies Item No. Quantity Unit Of Issue Item Description 1. 5 Roll Masking Tape 1" 2. 50 Pc Garbage Bag Medium Black 3. 2 Pc Airfreshener Lemon 4. 1 Pack Photopaper 5. 1,162 Pc Mailing Envelope Long Ordinary 6. 1 Pc Scissor 7. 10 Pad Sticky Note Fluorescent Color 8. 4 Pc Ruler # 12" 9. 10 Pcs Bookbinding Long 10. 45 Bot Alcohol 11. 20 Pcs Voucher Binder 12. 19 Pc Signpen Blue 13. 9 Box Paper Fastener 14. 12 Pc Ballpen (green) 15. 8 Box Plastic Paper Fastener Long 16. 26 Pc Whiteboard Marker Black 17. 16 Pc Marker Permanent (black) 18. 18 Bot Elmer's Glue 240g 19. 120 Pc Pencil 20. 10 Pc Stamp Pad 21. 90 Pc Signpen Liquid Gel Black 22. 9 Bot Stamp Pad Ink 23. 1,152 Pc Ballpen (black) 24. 96 Pc Ballpen (red) 25. 9 Pc Calculator 26. 265 Pc Correction Tape, Roller Type 27. 481 Pc Brown Envelope Long 28. 2 Unit Calculator (scientific) 29. 14 Pc Brown Envelope A4 30. 1 Box Brown Envelope, Legal Size 31. 12 Pc Scotch Tape #1 32. 1 Pack Folder W/ Tab, Legal Size 33. 1 Pc Packaging Tape 34. 8 Ream Bondpaper A3 35. 12 Pc Folder Brown Long 36. 177 Ream Bondpaper Long Us 37. 18 Bot Air Freshener 300ml Big 38. 295 Ream Bondpaper A4 39. 24 Bot Dishwashing Liquid Soap 500ml 40. 4 Pc Dishwashing Soap 41. 15 Pc Dustpan, Heavy Duty 42. 4 Pack Battery (aaa) 43. 9 Pc Doormat/rug Rubber 44. 13 Pack Energizer Battery (aa) 45. 12 Pack Energizer Triple A 4 Battery 46. 4 Box Assorted Stabilo Marker/highlighter 47. 3 Pc Eraser For Whiteboard 48. 2 Gal Alcohol Ethyl 68%-72% Gallon 49. 732 Pc Folder White Long Size 50. 8 Can Airfreshener, Aerosol, 280ml,500ml/150g Min 51. 44 Pc Pentel Penblack Fineand Broad 52. 3 Pc Cutter For General Purpose, Plastic Molded Body 53. 8 Pc File Folder/stand File Box 54. 5 Box Gun Tacker Staple Wire 55. 12 Bot Insect Spray Baygon 350ml Water Based 56. 2 Pc Gun Tacker Tools Heavy Duty 57. 24 Pc Plain Window Curtains (non-ring) 58. 21 Pad Photopaper Glossy A4 59. 6 Box Push Pins 60. 17 Pc Stapler W/ Staple Remover (heavy Duty) 61. 7 Pc Sponge 62. 47 Box Staple Wire # 35 63. 1 Box Thumbtacks No. 111 64. 6 Pc Ruler 65. 8 Pc Trashcan (medium) 66. 5 Box Rubber Bond #18 67. 9 Bot Toilet Bowl Cleaner 1l 68. 23 Pc Record Book/logbook 500p 69. 5 Pc Toilet Tissue Paper, 2 Plys Sheets, 150 Pulls 70. 8 Pair Paper Scissors 71. 19 Box Paper Clip (48mm) 72. 21 Ream Us Bondpaper Short 73. 5 Pad Notepad, Stick On 3x3 74. 5 Ream Ordinary Bondpaper Short 75. 8 Bot Multipurpose Glue (200g/bottle) 76. 2 Ream Dtr W/ Accomplishment 77. 2 Ream Accomplishment Report Form 78. 1 Box Green Expanded Folder (legal Size) 79. 1 Box Ordinary Folder (legal Size) 80. 5 Pc File Box Organizer 81. 1 Pc Wall Clock 82. 25 Box Paper Clip (55mm) 83. 139 Pc Ballpen Blue 84. 1 Pack Safeguard Soap Bar 85. 89 Pc Tissue Paper 86. 1 Pc Laundry Powder Detergent 87. 2 Pc Floor Mat 88. 2 Roll Tape Transparent 24mm 89. 7 Roll Tape Double Sided 90. 5 Unit Calculator, Compact, Electronic, 12 Digits 91. 2 Pc Table Name Plate 92. 1 Pc Megaboxplastic Drawer (5-6 Layers) 93. 1 Pc Kitchen Organizer 94. 3 Pack Special Paper, Beige Or Off-white Color 95. 1 Pc Whiteboard (2'x3') 96. 2 Pack Battery, Dry Cell, Aaa, 1.5 Volts, Alkaline 97. 15 Pc Broom, Soft (tambo) 98. 1 Box Carbon Film, Pe, Black Sie 216mm X 330mm 99. 2 Pc Clearbook, 20 Transparent Pockets, Legal 100. 1 Box Clip, Backfold, All Metal, Clamping: 19mm 101. 1 Box Clip, Backfold, All Metal, Clamping: 25mm 102. 1 Box Clip, Backfold, All Metal, Clamping: 32mm 103. 1 Box Clip, Backfold, All Metal, Clamping: 50mm 104. 10 Box Data File Box, With Closed Ends 105. 3 Pack Folder, Tagboard, Legal Size 106. 1 Jar Glue, All Purpose , 200 Grams 107. 1 Set Marker, Flourescent, 3 Assorted Colors 108. 10 Pad Notepad, Stick On 76mmx76mm, 3"x3 109. 3 Pc Puncher, Heavy Duty With Two Hole 110. 4 Pc Ruler, Plastic 450mm (18") 111. 5 Stub Staple Wire, Standard 26/6 112. 1 Stub Cash Box 113. 3 Pc Tape Dispenser, Table Top, 24mm 114. 10 Pc Tape, Transparent, 24mm 115. 13 Bot Disinfectant Spray 116. 10 Box Ballpoint Pen, Black 117. 5 Pc Plastic Envelope Long 118. 16 Roll Scotch Tape 2" 119. 245 Pc Vellum Paper, A4 120. 2 Pc Plastic Ring Binding, A4 121. 2 Box Board Pin 122. 1 Bot Muriatic Acid (500ml) 123. 16 Bot Toilet Bleach Cleaner 1l 124. 1 Pc Toilet Brush 125. 3 Pc Hand Soap Liquid 126. 2 Pc Broomstick Lanot 127. 2 Pc Garbage Bin 128. 2 Unit Foldable Table Dimension: 180x60x74 Cm High Density Polythylene Board Lightweight Steel Frame 129. 15 Unit Monoblockchair Durable Polypropylene Material 130. 5 Ream Vellum Board (size A4/100pcs/ream 131. 1 Unit Filing Cabinet 132. 265 Pc Folder A4 133. 130 Pack Vinyl Sticker Paper Glossy Type/water Proof 134. 1 Pc Floor Mop 135. 3 Gal Zonrox 136. 4 Liter Zonrox Original 1l 137. 24 Pc Sign Pen (black) Fine 0.4 Mm 138. 9 Pc Airfreshener 139. 10 Box Index Tabs With Alphabetical Print Insert (clear) 140. 20 Pack Construction Paper (assorted Colors) 20pcs/pack A4 Size 141. 100 Pc Pvc Binding Cover Acetate A4 Size 200 Microns 0.2 Mm Thick 142. 48 Pc Drinking Glass 143. 279 Pc Brown Envelope Short 144. 11 Pc Albatross With Holder 145. 6 Bot Mr. Muscle Glass Cleaner 750 Ml 146. 3 Pc Kitchen Towel 2ply/70 Pulls 147. 2 Doz Powder Detergent 148. 5 Pc Binder Long (black) 149. 1 Pc Kaldero 150. 1 Set Stainless Steel Kitchen Laddle Set 151. 2 Doz Cup (white) 152. 2 Doz Saucer (white) 153. 2 Doz Spoon 154. 2 Doz Fork 155. 15 Pc White Ceramic Soup Bowl (small) 156. 2 Pc White Ceramic Soup Bowl (big) 157. 1 Set Kitchen Knife Set 158. 2 Unit Executive Chair (big) 159. 1 Pc Pegasus Plastofoil Carbon Paper 160. 1 Pc Book Binder Long (red) 161. 12 Pc Book Binder Long (blue) 162. 5 Pc Book Binder Long (green) 163. 1 Pc Tissue 10 Rolls 3 Ply 164. 500 Pc Customized Index Card (leyson) 165. 8 Box Full Strip Staples No. 35 26/6 166. 5 Pc Magazine File Organizer (long) 167. 3 Pc Customized Rubber Stamp 168. 10 Pc Plastic Tray (rectangular) 169. 7 Pc File Organizer Tray Long (steel) 170. 1 Pc White Board 171. 5 Box Ballpen Black Hbwmatrix Og-5 (black), 50pcs/box 172. 23 Pc Highlighter Pen (green & Yellow) 173. 25 Pc Plastic Folder Thick (green) Long 174. 25 Pc Plastic Folder Thick (green) A4 175. 2 Pc File Folder Clear Book Long 27 Holes 176. 5 Pc Masking Tape 2" 177. 1 Box Permanent Marker Black 178. 7 Pc Double Sided Tape Big 179. 2 Pc 3 Tier Document Tray Filing Rack 180. 6 Pc Document File Organizer 181. 1 Pc Whiteboard 60cm X 90cm 182. 6 Roll Double Sided Tape 1-1/2 183. 86 Pc Fabric Conditioner 184. 2 Can Floor Red Dye Wax @ 2kls 185. 125 Pc Folder White Short 186. 5 Bag Garbage Bag (big) Xl 187. 2 Bag Garbage Bag(small) For Trash Can 188. 13 Bar Laundry Soap Bar White 189. 41 Pc Laundry Powder 190. 1 Doz Plate Ceramic 191. 1 Doz Glass 192. 1 Doz Stainless Spoon 193. 1 Doz Stainless Fork 194. 1 Box Fastener Metal 195. 2 Pc Magazine File Box (8.5"width) 196. 2 Box Binder Clip Big 197. 2 Box Binder Clip Small 198. 1 Pc Cotton 199. 6 Pc Curtain 200. 3 Box Data File Box 201. 20 Pc Expanded Envelope Long 202. 15 Pc Expanded Envelope Plastic With Handle Long 203. 25 Pc Envelope, Expanding,kraftboard (legal Size) 204. 1 Box Envelope, Mailing White With Window 205. 25 Pc Envelope, Expanding, Plastic (legal Size) 206. 1 Box Fastener,metal, 70mm Between Prongs 207. 1 Pack Folder, Tagboard, A4 Size 208. 1 Pack Folder, L-type, Plastic For A4 Size 209. 1 Pack Folder, L-type, Plastic For Longsize 210. 1 Set Fork And Spoon 211. 1 Bdle Garbage Bag 15 X 15 X 32 212. 5 Pc Marking Pen For Whiteboard 213. 1 Pc Mop Handle, Hd, Screw Type 214. 2 Pad Notepad, Stick On (2"x3") 215. 2 Pad Notepad, Stick On (3"x4") 216. 10 Pack Paper Board A4 217. 1 Pc Scouring Pad 218. 1 Box Staple Wire Small 219. 5 Box Bottled Water 220. 200 Pc Coffee 221. 10 Roll Garbage Bag Black Small 222. 5 Roll Garbage Bag Black Medium 223. 5 Roll Garbage Bag Black Large 224. 5 Pc Liquid Detergent Soap 2.5l 225. 2 Gal Alcohol Ethyl Red 226. 3 Gal Body Wash (kmatic) 227. 3 Gal Shampoo (verdon) 5l 228. 100 Meter Garden Hose 229. 5 Pack Photo Sticker Paper (a4) 230. 5 Doz Transparent Envelope (long) 231. 1 Pc Expanding File Envelope With Handle (long) 232. 2 Pc Record Book (200 Pages) 233. 4 Pack Sticky Note (2x3") 234. 1 Pc Ruler Flexible (24") 235. 2 Pc Scissor (7 1/2") 236. 2 Box Binder Clip (1 5/8") 237. 5 Pc Magazine Box/stand File Box 238. 1 Pc Glue Gun 239. 1 Pc Desk File Organizer 240. 1 Pc Pentelpen Broad Red 241. 1 Pc Pentelpen Broad Blue 242. 1 Pc Whiteboard 3 X 5 243. 20 Pouch Detergent Powder 244. 1 Bdle Cartolina Assorted Color 245. 2 Pc Mophandle 246. 3 Pc Mophead 247. 2 Pad Notepad 248. 1 Bdle Ring Binder 32mm 249. 2 Pack Tape Transparent 48mm Lot No. 1 Abc Php 1,137,819.00 – Various Common Use Equipment 1. 1 Pc Usb 32g 2. 1 Unit Laptop With 1tb External Drive 3. 1 Set Desktop Computer Set 4. 2 Pc Sharp Photocopier Toner 5. 1 Unit Printer Epson L5290 6. 1 Unit Printer, Epson 7. 1 Unit Computer Set 8. 1 Unit Television 36" 9. 9 Unit Mouse, Optical, Usb Connection Type 10. 3 Cart Toner Cart, Hp Laser Jet 79a, Black 11. 3 Cart Toner Cart, Hp Laser Jet 12a, Black 12. 5 Set Brother Ink, Black, Cyan, Magenta, Yellow 13. 12 Pc Ribbon Cart, Black 14. 2 Pc Flash Drive Kingston Data Traveler (128gb) 15. 1 Unit Desktop Computer Set With Printer 16. 1 Pc Tp Link Wifi Wireless Adapter 17. 1 Unit Epson Maintenance Box For Epson L15150 18. 1 Bot Epson Printer Ink 008 Black 19. 1 Bot Epson Printer Ink 008 Cyan 20. 1 Bot Epson Printer Ink 008 Magenta 21. 1 Bot Epson Printer Ink 008 Yellow 22. 6 Pc Flash Drive (16gb) 23. 3 Pc Toner Hp Laserjet Printer 85a 24. 3 Pc Ink Brother Printer Dcp-t720dw Black 25. 3 Pc Ink Brother Printer Dcp-t720dw Cyan 26. 3 Pc Ink Brother Printer Dcp-t720dw Magenta 27. 3 Pc Ink Brother Printer Dcp-t720dw Yellow 28. 2 Pc Computer Mouse 29. 1 Unit Computer Keyboard 30. 3 Bot Epson Ink L3110#003 Black 31. 1 Set Computer Desktop W/ Printer And Table 32. 1 Set Com. Ink Brother Dcp-1710 W Bt5000c Cyan 33. 1 Set Com. Ink Brother Dcp-1710 W Bt5000d60 Black Cyan 34. 1 Set Com. Ink Brother Dcp-1710 W Bt5000m Magenta 35. 1 Set Com. Ink Brother Dcp-1710 W Bt5000y Yellow 36. 2 Bot 500ml Universal Ink (black) 37. 1 Bot 500ml Universal Ink (yellow) 38. 6 Pc Epson 664, Black 39. 4 Pc Epson 664, Cyan 40. 4 Pc Epson 664, Magenta 41. 4 Pc Epson 664, Yellow 42. 2 Bot Printer Ink, Epson Black 43. 2 Bot Printer Ink, Epson Cyan 44. 2 Bot Printer Ink, Epson Magenta 45. 2 Bot Printer Ink, Epson Yellow 46. 2 Bot Printer Ink, Brother Black 47. 2 Bot Printer Ink, Brother Cyan 48. 2 Bot Printer Ink, Brother Magenta 49. 2 Bot Printer Ink, Brother Yellow 50. 2 Pc Epson 003 Printer Ink (black) 51. 1 Pc Computer Stand 52. 1 Set Interactive Screen (hik Vision) 53. 3 Bot Epson L360 Ink (black) 54. 2 Set Epson L360 Ink (magenta, Cyan, 55. 2 Bot Hp Gt52 Ink (cyan) 56. 2 Bot Hp Gt52 Ink (magenta) 57. 2 Bot Hp Gt52 Ink (yellow) 58. 2 Bot Hp Gt52 Ink (black) 59. 4 Pc Epson L3210 (003) Black Ink Bottle 60. 4 Pc Epson L3210 (003) Cyan Ink Bottle 61. 4 Pc Epson L3210 (003) Magenta Ink Bottle 62. 4 Pc Epson L3210 (003) Yellow Ink Bottle 63. 4 Pc Bk Bt6000bk 64. 3 Pc Cbt5000c 65. 3 Pc Canon Printer Cartridge 811 66. 3 Pc Canon Printer Cartridge 810 67. 3 Pc Keyboard 68. 3 Pc M Bt5000m 69. 2 Pc Ups 70. 3 Pc Y Bt500y 71. 1 Set Ink Epson Set (003) 72. 1 Pc Ink Epson (black) 73. 1 Pc Ink Epson (magenta) 74. 1 Pc Ink Epson (cyan) 75. 1 Pc Ink Epson (yellow) 76. 1 Set Brother (cyan) 77. 1 Pc Wifi Adaptor 78. 2 Pc Rice Cooker 79. 2 Pc Flash Drive 64gb 80. 1 Bot Bt 5000m Ink Magenta (brother) 81. 1 Bot Bt 5000c Ink Cyan (brother) 82. 1 Bot Bt 5000y Ink Yellow (brother) 83. 1 Bot Bt 5000bk Ink Black (brother) 84. 1 Liter Universal Ink, Black 85. 1 Liter Universal Ink, Cyan 86. 1 Liter Universal Ink, Magenta 87. 1 Liter Universal Ink, Yellow 88. 1 Bot 003 Ink (epson), Magenta, 65ml 89. 1 Bot 003 Ink (epson), Cyan, 65ml 90. 1 Bot 003 Ink (epson), Yellow, 65ml 91. 1 Bot 003 Ink (epson), Black , 65ml 92. 1 Unit Office Desk High Quality With Drawer 93. 1 Unit Office Chair High Quality 94. 7 Bot Ink Brother Dcp-t&10w-bt 5000c (cyan) 95. 7 Bot Ink Brother Dcp-t&10w-bt 5000m (magenta) 96. 7 Bot Ink Brother Dcp-t&10w-bt 5000 (yellow) 97. 7 Bot Ink Brother Dcp-t&10w-bt 5000 Bk (black) 98. 1 Pc Usb Drive 99. 2 Set Computer Ink Epson L-210 Colored @4 100. 1 Unit Computer Monitor Brancd: Acer Display Size: 120hz Aspect Ration: 16:9 Frameless Resolution Lfhd 1080 P 101. 3 Unit Avr With Standby Power For Computer 102. 1 Set Com. Ink Brother Dcp-1710w-bt5000c Cyan 103. 1 Set Com. Ink Brother Dcp-1710w-bt5000d60 Black 104. 1 Set Com. Ink Brother Dcp-1710w-bt5000m Magenta 105. 1 Set Com. Ink Brother Dcp-1710w-bt5000y Yellow 106. 1 Pc External Hard Drive 107. 1 Unit Paper Trimmer/cutting Machine 108. 1 Unit Projector With Screen 109. 1 Unit Water Dispenser Specs: Dimension: 310 X 990 Mm Water Volume Cold: 3l Water Volume Hot: 1.25l Faucet Operations: Push Button With Child Lock For Hot Water Faucet With Chiller Compartment 110. 2 Unit Wifi Wireless Adapter 111. 12 Bot Epson L3110 Ink Black 112. 10 Bot Epson L3110 Ink Cyan 113. 10 Bot Epson L3110 Ink Yellow 114. 10 Bot Epson L3110 Ink Magenta 115. 1 Pc Hard Drive 1tb 116. 1 Unit Lapto (gaming Type) Brand: Acer Cpu: I5-14700hx Gpu: Nvidia Geforce Rtx 4060 Display: 16"wqxga, Ips Display 165hz Ram: 16gb Storage: Ssd 512gb Nvme 117. 2 Unit Mechanical Keyboard 118. 1 Unit 3 In 1 Printer 119. 1 Pc Ladder 120. 1 Unit Tv Monitor 55" 121. 1 Pc Hdmi Wire Cble 122. 1 Unit Epson Printer Wf-7210 123. 2 Set Epson Ink 008 124. 1 Set Epson Ink 252 125. 1 Set Printer Ink Set-epson 003 126. 1 Set 1 Unit Computer Set With Printer 127. 2 Bot Ink Cart, Epson Black 128. 2 Bot Ink Cart, Epson Cyan 129. 2 Bot Ink Cart, Epson Magenta 130. 2 Bot Ink Cart, Epson Yellow 2. The Municipality Of Gigaquit Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 30 Calendar Days After Receipt Of Notice To Proceed. Bidders Should Have Completed, Within One (1) Month From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Municipality Of Gigaquit And Inspect The Bidding Documents At The Address Given Below During From 9:00 A.m. To 4:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 23, 2025 To January 29, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through In Person. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before 10:00am Of January 30, 2025. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be On 10:00am Of January 30, 2025 At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The Municipality Of Gigaquit Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Jerson P. Jabay Municipal Planning & Development Coordinator Chairperson, Bids And Awards Committee Office Of The Bids And Awards Committee/secretariat 2nd Floor, Municipal Hall, Gigaquit, Surigao Del Norte 8409 Phone #: 094-8388-9739 11. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.gigaquit.ph [if Applicable] For Online Bid Submission: Www.gigaquit.ph January 23, 2025 Date Of Issue Jerson P. Jabay Bac Chairperson

Details: Sources Sought Notice sources Sought: This Is Not A Solicitation For A Proposal, Proposal Abstract, Or Quote. The Purpose Of This Notice Is To Obtain Information Regarding Qualified Business Sources. The Responses To The Information Requested Will Assist The Government In Determining The Appropriate Acquisition Method. statement Of Work (sow) the Contractor Shall Render Genetic Testing Laboratory Services In Accordance With This Statement Of Work To Support The Health Science Research Department At Durham Va Medical Center Under The Direction Of Dr. Deepak Voora, Executive Director Of National Pharmacogenomics Program At Va Central Office, For The Study/iir Titled, Reducing Veterans' Risk Of Atherosclerotic Cardiovascular Disease Through Pharmacogenomics Informed Statin Prescribing Funded By The Va Durham Healthcare System And Delivered To The Indianapolis Va Health Care System. description: Genomic Medicine Research Has Many Complexities Requiring Specialized Services, Skills, And Expertise, Including Complex Laboratory Analyses Requiring Specialized Equipment And Expertise In The Generation And Interpretation Of Genomic Data; Large Complex Genomic Datasets With Particular Storage, Privacy, And Information Security Requirements; Clinical Expertise In How Genomic Medicine Interventions Might Inform Health Care And Impact Health Outcomes; And Sensitivity To The Ethical, Psychosocial, Legal, And Regulatory Considerations Of Genomic Medicine Research. background: This Research Grant Proposes A Single Center, Randomized Clinical Trial Of Precision Statin Prescribing Versus Usual Care To Be Conducted At The Indianapolis Va Health Care System. Four-hundred And Ten (410) Veteran Patients Who Are At Risk For Cardiovascular Events And Have A Class I Indication For Statin Therapy, But Are Not Currently Prescribed One, Will Be Recruited And Randomly Allocated To Receive Either 1) Genetic Test Report That Provides An Assessment Of Their Risk For Cardiovascular Disease Events Based On A Polygenic Risk Score (prs) For Coronary Artery Disease And Their Risk Of Statin Associated Musculoskeletal Symptoms Based On Slco1b1 Genetic Testing Or 2) Usual Care. Specimens For Genetic Testing Will Be Collected Via Saliva Kit Administered With The Assistance Of Research Staff And Shipped Using A Common Carrier Delivery Service And Standard Chain Of Custody. description Of Work: The Contractor S Laboratory Services Shall Be In Accordance With Clinical Laboratory Improvement Amendments (clia) And Be A College Of American Pathologists (cap) Certified Clinical Diagnostic Genetic Testing Laboratory In Order To Successfully Perform The Required Genetic Testing For This Study. the Performing Laboratory Will Perform Dna Testing For A Prs For Cad And Slco1b1 Based Dna Sequencing, Pcr, Or Array-based Technologies, Analysis, Interpretation, And Reporting For This Study. the Certification And Accreditation (c&a) Requirements Do Not Apply, And That A Security Accreditation Package Is Not Required. primary Contractor Duties Include, But Are Not Limited To: specimen Accessioning, Extraction, And Test Management dna Sequencing And/or Genotyping For polygenic Risk Score (prs) For Coronary Artery Disease Cad genome Wide Genotyping/sequencing whole Genome Imputation variant Calling sample Qc genetic Variant Qc ancestry Specific Prs Calculation For Cad prs Interpretation And Report In Pdf Format slco1b1 Genetic Testing genotyping/sequencing variant Calling sample/variant Qc Star Allele Diplotype And Phenotype Interpretation Based On The Clinical Pharmacogenetics Implementation Consortium (cpic) Guidelines. reporting In Pdf Format each Laboratory Tests Unit Shall Include: saliva Swab Dna Collection Kit genome-wide Genotyping With Illumina Iscan Microarray Technology whole Genome Imputation variant Calling sample Qc (call Rate, Nominal Coverage, Heterozygosity Rate) genetic Variant Qc (genotype Probability) ancestry Specific Prs Calculation For Cad Prs cad Prs Reporting In Pdf Format slco1b1 Testing And Reporting In Pdf Format deliverables: Specific Items To Be Delivered To The Va Investigators, Include, But Are Not Limited To: human Specimen Sample Collection Supplies And Shipping Materials, Compliant With All Current Federal Regulations. clinical Polygenic Risk Score And Slco1b1 Report For Participants Randomized To The Genetic Testing Arm Of The Study. a Required Total Of An Estimated 68 Tests Per Year For Three (3) Years. other Pertinent Information: the Contractor Shall Provide Services For Both Components Of Necessary Testing: 1. Polygenic Risk Score For Coronary Artery Disease And 2. Slco1b1 Genetic Testing. the Contractor Shall Provide An Existing Ldt That They Have Available For The Purposes In This Statement Of Work, As Va Does Not Have An Ldt For These Purposes. The Vendor Shall Have An Existing Ldt As The Va Will Use The Ldt Within One Month Of The Contract Being Awarded. the Contractor Shall Not Work In Conjunction With Another Laboratory For The Polygenic Risk Score Or The Genetic Testing For Slco1b1 As Subcontracting Out And Shipping Samples From One Contractor S Laboratory To Another Is Not Within Best Interest Of The Va S Need At This Time. the Contractor S Services Shall Be Available Readily To Render To Va, In House, At Time Of Contract Award. timeframe: The Estimated Beginning And Ending Dates During Which The Contractor Is Required To Perform Work For Va Durham Are 1/13/2025 To 1/12/2026 With The Option To Renew Yearly Through 1/13/2028. va Information And Information System Security And Privacy Language 1. General. This Entire Section Applies To All Acquisitions Requiring Any Information Security And Privacy Language. Contractors, Contractor Personnel, Subcontractors And Subcontractor Personnel Will Be Subject To The Same Federal Laws, Regulations, Standards, Va Directives And Handbooks, As Va Personnel Regarding Information And Information System Security And Privacy. 2. Va Information Custodial Language. This Entire Section Applies To All Acquisitions Requiring Any Information Security And Privacy Language. a. The Government Shall Receive Unlimited Rights To Data/intellectual Property First Produced And Delivered In The Performance Of This Contract Or Order (hereinafter Contract ) Unless Expressly Stated Otherwise In This Contract. This Includes All Rights To Source Code And All Documentation Created In Support Thereof. The Primary Clause Used To Define Government And Contractor Data Rights Is Far 52.227-14 Rights In Data General. The Primary Clause Used To Define Computer Software License (not Data/intellectual Property First Produced Under This Contractor Or Order) Is Far 52.227-19, Commercial Computer Software License. b. Information Made Available To The Contractor By Va For The Performance Or Administration Of This Contract Will Be Used Only For The Purposes Specified In The Service Agreement, Sow, Pws, Pd, And/or Contract. The Contractor Shall Not Use Va Information In Any Other Manner Without Prior Written Approval From A Va Contracting Officer (co). The Primary Clause Used To Define Government And Contractor Data Rights Is Far 52.227-14 Rights In Data General. c. Va Information Will Not Be Co-mingled With Any Other Data On The Contractor S Information Systems Or Media Storage Systems. The Contractor Shall Ensure Compliance With Federal And Va Requirements Related To Data Protection, Data Encryption, Physical Data Segregation, Logical Data Segregation, Classification Requirements And Media Sanitization. d. Va Reserves The Right To Conduct Scheduled Or Unscheduled Audits, Assessments, Or Investigations Of Contractor Information Technology (it) Resources To Ensure Information Security Is Compliant With Federal And Va Requirements. The Contractor Shall Provide All Necessary Access To Records (including Electronic And Documentary Materials Related To The Contracts And Subcontracts) And Support (including Access To Contractor And Subcontractor Staff Associated With The Contract) To Va, Va's Office Inspector General (oig), And/or Government Accountability Office (gao) Staff During Periodic Control Assessments, Audits, Or Investigations. e. The Contractor May Only Use Va Information Within The Terms Of The Contract And Applicable Federal Law, Regulations, And Va Policies. If New Federal Information Security Laws, Regulations Or Va Policies Become Applicable After Execution Of The Contract, The Parties Agree To Negotiate Contract Modification And Adjustment Necessary To Implement The New Laws, Regulations, And/or Policies. f. The Contractor Shall Not Make Copies Of Va Information Except As Specifically Authorized And Necessary To Perform The Terms Of The Contract. If Copies Are Made For Restoration Purposes, After The Restoration Is Complete, The Copies Shall Be Destroyed In Accordance With Va Directive 6500, Va Cybersecurity Program And Va Information Security Knowledge Service. g. If A Veterans Health Administration (vha) Contract Is Terminated For Default Or Cause With A Business Associate, The Related Local Business Associate Agreement (baa) Shall Also Be Terminated And Actions Taken In Accordance With Vha Directive 1605.05, Business Associate Agreements. If There Is An Executed National Baa Associated With The Contract, Va Will Determine What Actions Are Appropriate And Notify The Contactor. h. The Contractor Shall Store And Transmit Va Sensitive Information In An Encrypted Form, Using Va-approved Encryption Tools Which Are, At A Minimum, Federal Information Processing Standards (fips) 140-2, Security Requirements For Cryptographic Modules (or Its Successor) Validated And In Conformance With Va Information Security Knowledge Service Requirements. The Contractor Shall Transmit Va Sensitive Information Using Va Approved Transport Layer Security (tls) Configured With Fips Based Cipher Suites In Conformance With National Institute Of Standards And Technology (nist) 800-52, Guidelines For The Selection, Configuration And Use Of Transport Layer Security (tls) Implementations. the Contractor S Firewall And Web Services Security Controls, As Applicable, Shall Meet Or Exceed Va S Minimum Requirements. j. Except For Uses And Disclosures Of Va Information Authorized By This Contract For Performance Of The Contract, The Contractor May Use And Disclose Va Information Only In Two Situations: (i) In Response To A Qualifying Order Of A Court Of Competent Jurisdiction After Notification To Va Co (ii) With Written Approval From The Va Co. The Contractor Shall Refer All Requests For, Demands For Production Of Or Inquiries About, Va Information And Information Systems To The Va Co For Response. k. Notwithstanding The Provision Above, The Contractor Shall Not Release Va Records Protected By Title 38 U.s.c. § 5705, Confidentiality Of Medical Qualityassurance Records And/or Title 38 U.s.c. § 7332, Confidentiality Of Certain Medical Records Pertaining To Drug Addiction, Sickle Cell Anemia, Alcoholism Or Alcohol Abuse Or Infection With Human Immunodeficiency Virus (hiv). If The Contractor Is In Receipt Of A Court Order Or Other Requests For The Above Mentioned Information, The Contractor Shall Immediately Refer Such Court Order Or Other Requests To The Va Co For Response. l. Information Made Available To The Contractor By Va For The Performance Or Administration Of This Contract Or Information Developed By The Contractor In Performance Or Administration Of The Contract Will Be Protected And Secured In Accordance With Va Directive 6500 And Identity And Access Management (iam) Security Processes Specified In The Va Information Security Knowledge Service. m. Any Data Destruction Done On Behalf Of Va By A Contractor Shall Be Done In Accordance With National Archives And Records Administration (nara) Requirements As Outlined In Va Directive 6300, Records And Information Management, Va Handbook 6300.1, Records Management Procedures, And Applicable Va Records Control Schedules. n. The Contractor Shall Provide Its Plan For Destruction Of All Va Data In Its Possession According To Va Directive 6500 And Nist 800-88, Guidelines For Media Sanitization Prior To Termination Or Completion Of This Contract. If Directed By The Cor/co, The Contractor Shall Return All Federal Records To Va For Disposition. o. Any Media, Such As Paper, Magnetic Tape, Magnetic Disks, Solid State Devices Or Optical Discs That Is Used To Store, Process, Or Access Va Information That Cannot Be Destroyed Shall Be Returned To Va.the Contractor Shall Hold The Appropriate Material Until Otherwise Directed By The Contracting Officer S Representative (cor) Or Co. Items Shall Be Returned Securely Via Va-approved Methods. Va Sensitive Information Must Be Transmitted Utilizing Va-approved Encryption Tools Which Are Validated Under Fips 140-2 (or Its Successor) And Nist 800-52. If Mailed, The Contractor Shall Send Via A Trackable Method (usps, Ups, Fedex, Etc.) And Immediately Provide The Cor/co With The Tracking Information. Self-certification By The Contractor That The Data Destruction Requirements Above Have Been Met Shall Be Sent To The Cor/co Within 30 Business Days Of Termination Of The Contract. p. All Electronic Storage Media (hard Drives, Optical Disks, Cds, Back-up Tapes, Etc.) Used To Store, Process Or Access Va Information Will Not Be Returned To The Contractor At The End Of Lease, Loan, Or Trade-in. Exceptions To This Paragraph Will Only Be Granted With The Written Approval Of The Va Co. 3. Access To Va Information And Va Information Systems. This Section Applies When Any Person Requires Access To Information Made Available To The Contractor By Va For The Performance Or Administration Of This Contract Or Information Developed By The Contractor In Performance Or Administration Of The Contract. a. A Contractor/subcontractor Shall Request Logical (technical) Or Physical Access To Va Information And Va Information Systems For Their Employees And Subcontractors Only To The Extent Necessary To Perform The Services Specified In The Solicitation Or Contract. This Includes Indirect Entities, Both Affiliate Of Contractor/subcontractor And Agent Of Contractor/subcontractor. b. Contractors And Subcontractors Shall Sign The Va Information Security Rule Of Behavior (rob) Before Access Is Provided To Va Information And Information Systems (see Section 4, Training, Below). The Rob Contains The Minimum User Compliance Requirements And Does Not Supersede Any Policies Of Va Facilities Or Other Agency Components Which Provide Higher Levels Of Protection To Va S Information Or Information Systems. Users Who Require Privileged Access Shall Complete The Va Elevated Privilege Access Request Processes Before Privileged Access Is Granted. c. All Contractors And Subcontractors Working With Va Information Are Subject To The Same Security Investigative And Clearance Requirements As Those Of Va Appointees Or Employees Who Have Access To The Same Types Of Information. The Level And Process Of Background Security Investigations For Contractors Shall Be In Accordance With Va Directive And Handbook 0710, Personnel Suitability And Security Program. The Office Of Human Resources And Administration/operations, Security And Preparedness (hra/osp) Is Responsible For These Policies And Procedures. Contract Personnel Who Require Access To Classified Information Or Information Systems Shall Have An Appropriate Security Clearance. Verification Of A Security Clearance Shall Be Processed Through The Special Security Officer Located In Hra/osp. Contractors Shall Conform To All Requirements Stated In The National Industrial Security Program Operating Manual (nispom). d. All Contractors And Subcontractors Shall Comply With Conditions Specified In Vaar 852.204-71(d); Contractor Operations Required To Be In United States. All Contractors And Subcontractors Working With Va Information Must Be Permanently Located Within A Jurisdiction Subject To The Law Of The United States Or Its Territories To The Maximum Extent Feasible. If Services Are Proposed To Be Performed Abroad The Contractor Must State Where All Non-u.s. Services Are Provided. The Contractor Shall Deliver To Va A Detailed Plan Specifically Addressing Communications, Personnel Control, Data Protection And Potential Legal Issues. The Plan Shall Be Approved By The Cor/co In Writing Prior To Access Being Granted. e. The Contractor Shall Notify The Cor/co In Writing Immediately (no Later Than 24 Hours) After Personnel Separation Or Occurrence Of Other Causes. Causes May Include The Following: (1) Contractor/subcontractor Personnel No Longer Has A Need For Access To Va Information Or Va Information Systems. (2) Contractor/subcontractor Personnel Are Terminated, Suspended, Or Otherwise Has Their Work On A Va Project Discontinued For Any Reason. (3) Contractor Believes Their Own Personnel Or Subcontractor Personnel May Pose A Threat To Their Company S Working Environment Or To Any Companyowned Property. This Includes Contractor-owned Assets, Buildings, Confidential Data, Customers, Employees, Networks, Systems, Trade Secrets And/or Va Data. (4) Any Previously Undisclosed Changes To Contractor/subcontractor Background History Are Brought To Light, Including But Not Limited To Changes To Background Investigation Or Employee Record. (5) Contractor/subcontractor Personnel Have Their Authorization To Work In The United States Revoked. (6) Agreement By Which Contractor Provides Products And Services To Va Has Either Been Fulfilled Or Terminated, Such That Va Can Cut Off Electronic And/or Physical Access For Contractor Personnel. f. In Such Cases Of Contract Fulfillment, Termination, Or Other Causes; The Contractor Shall Take The Necessary Measures To Immediately Revoke Access To Va Network, Property, Information, And Information Systems (logical And Physical) By Contractor/subcontractor Personnel. These Measures Include (but Are Not Limited To): Removing And Then Securing Personal Identity Verification (piv) Badges And Piv Interoperable (piv-i) Access Badges, Va-issued Photo Badges, Credentials For Va Facilities And Devices, Va-issued Laptops, And Authentication Tokens. Contractors Shall Notify The Appropriate Va Cor/co Immediately To Initiate Access Removal. g. Contractors/subcontractors Who No Longer Require Va Accesses Will Return Vaissued Property To Va. This Property Includes (but Is Not Limited To): Documents, Electronic Equipment, Keys, And Parking Passes. Piv And Piv-i Access Badges Shall Be Returned To The Nearest Va Piv Badge Issuance Office. Once They Have Had Access To Va Information, Information Systems, Networks And Va Property In Their Possessions Removed, Contractors Shall Notify The Appropriate Va Cor/co. 4. Training. This Entire Section Applies To All Acquisitions Which Include Section 3. a. All Contractors And Subcontractors Requiring Access To Va Information And Va Information Systems Shall Successfully Complete The Following Before Being Granted Access To Va Information And Its Systems: (1) Va Privacy And Information Security Awareness And Rules Of Behavior Course (talent Management System (tms) #10176) Initially And Annually Thereafter. (2) Sign And Acknowledge (electronically Through Tms #10176) Understanding Of And Responsibilities For Compliance With The Organizational Rules Of Behavior, Relating To Access To Va Information And Information Systems Initially And Annually Thereafter; And (3) Successfully Complete Any Additional Cyber Security Or Privacy Training, As required For Va Personnel With Equivalent Information System Or Information Access [to Be Defined By The Va Program Official And Provided To The Va Co For Inclusion In The Solicitation Document I.e., Any Rolebased Information Security Training]. b. The Contractor Shall Provide To The Cor/co A Copy Of The Training Certificates And Certification Of Signing The Organizational Rules Of Behavior For Each Applicable Employee Within Five Days Of The Initiation Of The Contract And Annually Thereafter, As Required. c. Failure To Complete The Mandatory Annual Training Is Grounds For Suspension Or Termination Of All Physical Or Electronic Access Privileges And Removal From Work On The Contract Until Such Time As The Required Training Is Complete. 5. Security Incident Investigation. This Entire Section Applies To All Acquisitions Requiring Any Information Security And Privacy Language. a. The Contractor, Subcontractor, Their Employees, Or Business Associates Shall Immediately (within One Hour) Report Suspected Security / Privacy Incidents To The Va Oit S Enterprise Service Desk (esd) By Calling (855) 673-4357 (tty: 711). The Esd Is Oit S 24/7/365 Single Point Of Contact For It-related Issues. After Reporting To The Esd, The Contractor, Subcontractor, Their Employees, Or Business Associates Shall, Within One Hour, Provide The Cor/co The Incident Number Received From The Esd. b. To The Extent Known By The Contractor/subcontractor, The Contractor/ Subcontractor's Notice To Va Shall Identify The Information Involved And The Circumstances Surrounding The Incident, Including The Following: (1) The Date And Time (or Approximation Of) The Security Incident Occurred. (2) The Names Of Individuals Involved (when Applicable). (3) The Physical And Logical (if Applicable) Location Of The Incident. (4) Why The Security Incident Took Place (i.e., Catalyst For The Failure). (5) The Amount Of Data Belonging To Va Believed To Have Been Compromised. (6) The Remediation Measures The Contractor Is Taking To Ensure No Future Incidents Of A Similar Nature. c. After The Contractor Has Provided The Initial Detailed Incident Summary To Va, They Will Continue To Provide Written Updates On Any New And Relevant Circumstances Or Facts They Discover. The Contractor, Subcontractor, And Their Employes Shall Fully Cooperate With Va Or Third-party Entity Performing An Independent Risk Analysis On Behalf Of Va. Failure To Cooperate May Be Deemed A Material Breach And Grounds For Contract Termination. d. Va It Contractors Shall Follow Va Handbook 6500, Risk Management Framework For Va Information Systems Va Information Security Program, And Va Information Security Knowledge Service Guidance For Implementing An Incident Response Plan Or Integrating With An Existing Va Implementation. e. In Instances Of Theft Or Break-in Or Other Criminal Activity, The Contractor/subcontractor Must Concurrently Report The Incident To The Appropriate Law Enforcement Entity (or Entities) Of Jurisdiction, Including The Va Oig, And The Va Office Of Security And Law Enforcement. The Contractor, Its Employees, And Its Subcontractors And Their Employees Shall Cooperate With Va And Any Law Enforcement Authority Responsible For The Investigation And Prosecution Of Any Possible Criminal Law Violation(s) Associated With Any Incident. The Contractor/subcontractor Shall Cooperate With Va In Any Civil Litigation To Recover Va Information, Obtain Monetary Or Other Compensation From A Third Party For Damages Arising From Any Incident, Or Obtain Injunctive Relief Against Any Third Party Arising From, Or Related To, The Incident. f. The Contractor Shall Comply With Va Handbook 6500.2, Management Of Breaches Involving Sensitive Personal Information, Which Establishes The Breach Management Policies And Assigns Responsibilities For The Oversight, Management And Reporting Procedures Associated With Managing Of Breaches. g. With Respect To Unsecured Protected Health Information (phi), The Contractor Is Deemed To Have Discovered A Data Breach When The Contractor Knew Or Should Have Known Of Breach Of Such Information. When A Business Associate Is Part Of Vha Contract, Notification To The Covered Entity (vha) Shall Be Made In Accordance With The Executed Baa. h. If The Contractor Or Any Of Its Agents Fails To Protect Va Sensitive Personal Information Or Otherwise Engages In Conduct Which Results In A Data Breach Involving Any Va Sensitive Personal Information The Contractor/subcontractor Processes Or Maintains Under The Contract; The Contractor Shall Pay Liquidated Damages To The Va As Set Forth In Clause 852.211-76, Liquidated Damages Reimbursement For Data Breach Costs 6. Information System Design And Development. This Entire Section Applies To Information Systems, Systems, Major Applications, Minor Applications, Enclaves, And Platform Information Technologies (to Include The Subcomponents Of Each) Designed Or Developed For Or On Behalf Of Va By Any Non-va Entity. a. Information Systems Designed Or Developed On Behalf Of Va At Non-va Facilities Shall Comply With All Applicable Federal Law, Regulations, And Va Policies. This Includes Standards For The Protection Of Electronic Protected Health Information (phi), Outlined In 45 C.f.r. Part 164, Subpart C And Information And System Security Categorization Level Designations In Accordance With Fips 199, Standards For Security Categorization Of Federal Information And Information Systems And Fips 200, Minimum Security Requirements For Federal Information Systems. Baseline Security Controls Shall Be Implemented Commensurate With The Fips 199 System Security Categorization (reference Va Handbook 6500 And Va Trusted Internet Connections (tic) Architecture). b. Contracted New Developments Require Creation, Testing, Evaluation, And Authorization In Compliance With Va Assessment And Authorization (a&a) Processes In Va Handbook 6500 And Va Information Security Knowledge Service To Obtain An Authority To Operate (ato). Va Directive 6517, Risk Management Framework For Cloud Computing Services, Provides The Security And Privacy Requirements For Cloud Environments. c. Va It Contractors, Subcontractors And Third-party Service Providers Shall Address And/or Integrate Applicable Va Handbook 6500, Va Handbook 6517, Risk Management Framework For Cloud Computing Services And Information Security Knowledge Service Specifications In Delivered It Systems/solutions, Products And/or Services. If Systems/solutions, Products And/or Services Do Not Directly Match Va Security Requirements, The Contractor Shall Work Though The Cor/co To Identify The Va Organization Responsible For Governance Or Resolution. Contractors Shall Comply With Far 39.1, Specifically The Prohibitions Referenced. d. The Contractor (including Producers And Resellers) Shall Comply With Office Of Management And Budget (omb) M-22-18 And M-23-16 When Using Third-party Software On Va Information Systems Or Otherwise Affecting The Va Information. This Includes New Software Purchases And Software Renewals For Software Developed Or Modified By Major Version Change After The Issuance Date Of M22-18 (september 14, 2022). The Term Software Includes Firmware, Operating Systems, Applications And Application Services (e.g., Cloud-based Software), As Well As Products Containing Software. The Contractor Shall Provide A Self Attestation That Secure Software Development Practices Are Utilized As Outlined By Executive Order (eo)14028 And Nist Guidance. A Third-party Assessment Provided By Either A Certified Federal Risk And Authorization Management Program (fedramp) Third Party Assessor Organization (3pao) Or One Approved By The Agency Will Be Acceptable In Lieu Of A Software Producer's Self Attestation. e. The Contractor Shall Ensure All Delivered Applications, Systems And Information Systems Are Compliant With Homeland Security Presidential Directive (hspd) 12 And Va Identity And Access Management (iam) Enterprise Identity Management Requirements As Set Forth In Omb M-19-17, M-05-24, Fips 201-3, Personal Identity Verification (piv) Of Federal Employees And Contractors (or Its Successor), M-21-31 And Supporting Nist Guidance. This Applies To Commercial Off-the-shelf (cots) Product(s) That The Contractor Did Not Develop, All Software Configurations And All Customizations. f. The Contractor Shall Ensure All Contractor Delivered Applications And Systems Provide User Authentication Services Compliant With Va Handbook 6500, Va Information Security Knowledge Service, Iam Enterprise Requirements And Nist 800-63, Digital Identity Guidelines, For Direct, Assertion-based Authentication And/or Trust-based Authentication, As Determined By The Design And Integration Patterns. Direct Authentication At A Minimum Must Include Public Key Infrastructure (pki) Based Authentication Supportive Of Piv And/or Common Access Card (cac), As Determined By The Business Need And Compliance With Va Information Security Knowledge Service Specifications. g. The Contractor Shall Use Va Authorized Technical Security Baseline Configurations And Certify To The Cor That Applications Are Fully Functional And Operate Correctly As Intended On Systems In Compliance With Va Baselines Prior To Acceptance Or Connection Into An Authorized Va Computing Environment. If The Defense Information Systems Agency (disa) Has Created A Security Technical Implementation Guide (stig) For The Technology, The Contractor May Configure To Comply With That Stig. If Va Determines A New Or Updated Va Configuration Baseline Needs To Be Created, The Contractor Shall Provide Required Technical Support To Develop The Configuration Settings. Far 39.1 Requires The Population Of Operating Systems And Applications Includes All Listed On The Nist National Checklist Program Checklist Repository. h. The Standard Installation, Operation, Maintenance, Updating And Patching Of Software Shall Not Alter The Configuration Settings From Va Approved Baseline Configuration. Software Developed For Va Must Be Compatible With Va Enterprise Installer Services And Install To The Default Program Files Directory With Silently Install And Uninstall. The Contractor Shall Perform Testing Of All Updates And Patching Prior To Implementation On Va Systems. i. Applications Designed For Normal End Users Will Run In The Standard User Context Without Elevated System Administration Privileges. j. The Contractor-delivered Solutions Shall Reside On Va Approved Operating Systems. Exceptions To This Will Only Be Granted With The Written Approval Of The Cor/co. k. The Contractor Shall Design, Develop, And Implement Security And Privacy Controls In Accordance With The Provisions Of Va Security System Development Life Cycle Outlined In Nist 800-37, Risk Management Framework For Information Systems And Organizations: A System Life Cycle Approach For Security And Privacy, Va Directive And Handbook 6500, And Va Handbook 6517. l. The Contractor Shall Comply With The Privacy Act Of1974 (the Act), Far 52.224-2 Privacy Act, And Va Rules And Regulations Issued Under The Act In The Design, Development, Or Operation Of Any System Of Records On Individuals To Accomplish A Va Function. m. The Contractor Shall Ensure The Security Of All Procured Or Developed Information Systems, Systems, Major Applications, Minor Applications, Enclaves And Platform Information Technologies, Including Their Subcomponents (hereinafter Referred To As Information Systems ) Throughout The Life Of This Contract And Any Extension, Warranty, Or Maintenance Periods. This Includes Security Configurations, Workarounds, Patches, Hotfixes, Upgrades, Replacements And Any Physical Components Which May Be Necessary To Remediate All Security Vulnerabilities Published Or Known To The Contractor Anywhere In The Information Systems (including Systems, Operating Systems, Products, Hardware, Software, Applications And Firmware). The Contractor Shall Ensure Security Fixes Do Not Negatively Impact The Information Systems. n. When The Contractor Is Responsible For Operations Or Maintenance Of The Systems, The Contractor Shall Apply The Security Fixes Within The Timeframe Specified By The Associated Controls On The Va Information Security Knowledge Service. When Security Fixes Involve Installing Third Party Patches (such As Microsoft Os Patches Or Adobe Acrobat), The Contractor Shall Provide Written Notice To The Va Cor/co That The Patch Has Been Validated As To Not Affecting The Systems Within 10 Business Days. 7. Information System Hosting, Operation, Maintenance Or Use. this Entire Section Applies To Information Systems, Systems, Major Applications, Minor Applications, Enclaves, And Platform Information Technologies (cloud And Noncloud) Hosted, Operated, Maintained, Or Used On Behalf Of Va At Non-va Facilities. a. The Contractor Shall Comply With All Federal Laws, Regulations, And Va Policies For Information Systems (cloud And Non-cloud) That Are Hosted, Operated, Maintained, Or Used On Behalf Of Va At Non-va Facilities. Security Controls For Collecting, Processing, Transmitting, And Storing Of Va Sensitive Information, Must Be In Place. The Controls Will Be Tested By Va Or A Va Sanctioned 3paoand Approved By Va Prior To Hosting, Operation, Maintenance Or Use Of The Information System Or Systems By Or On Behalf Of Va. This Includes Conducting Compliance Risk Assessments, Security Architecture Analysis, Routine Vulnerability Scanning, System Patching, Change Management Procedures And The Completion Of An Acceptable Contingency Plan For Each System. The Contractor S Security Control Procedures Shall Be The Same As Procedures Used To Secure Va-operated Information Systems. b. Outsourcing (contractor Facility, Equipment, Or Staff) Of Systems Or Network Operations, Telecommunications Services Or Other Managed Services Require Assessment And Authorization (a&a) Of The Contractor S Systems In Accordance With Va Handbook 6500 As Specified In Va Information Security Knowledge Service. Major Changes To The A&a Package May Require Reviewing And Updating All The Documentation Associated With The Change. The Contractor S Cloud Computing Systems Shall Comply With Fedramp And Va Directive 6517 Requirements. c. The Contractor Shall Return All Electronic Storage Media (hard Drives, Optical Disks, Cds, Back-up Tapes, Etc.) On Non-va Leased Or Non-va Owned It Equipment Used To Store, Process Or Access Va Information To Va In Accordance With A&a Package Requirements. This Applies When The Contract Is Terminated Or Completed And Prior To Disposal Of Media. The Contractor Shall Provide Its Plan For Destruction Of All Va Data In Its Possession According To Va Information Security Knowledge Service Requirements And Nist 800-88. The Contractor Shall Send A Self-certification That The Data Destruction Requirements Above Have Been Met To The Cor/co Within 30 Business Days Of Termination Of The Contract. d. All External Internet Connections To Va Network Involving Va Information Must Be In Accordance With Va Trusted Internet Connection (tic) Reference Architecture And Va Directive And Handbook 6513, Secure External Connections And Reviewed And Approved By Va Prior To Implementation. Government-owned Contractor-operated Systems, Third Party Or Business Partner Networks Require A Memorandum Of Understanding (mou) And Interconnection Security Agreements (isa). e. Contractor Procedures Shall Be Subject To Periodic, Announced, Or Unannounced Assessments By Va Officials, The Oig Or A 3pao. The Physical Security Aspects Associated With Contractor Activities Are Also Subject To Such Assessments. The Contractor Shall Report, In Writing, Any Deficiencies Noted During The Above Assessment To The Va Cor/co. The Contractor Shall Use Va S Defined Processes To Document Planned Remedial Actions That Address Identified Deficiencies In Information Security Policies, Procedures, And Practices. The Contractor Shall Correct Security Deficiencies Within The Timeframes Specified In The Va Information Security Knowledge Service. f. All Major Information System Changes Which Occur In The Production Environment Shall Be Reviewed By The Va To Determine The Impact On Privacy And Security Of The System. Based On The Review Results, Updates To The Authority To Operate (ato) Documentation And Parameters May Be Required To Remain In Compliance With Va Handbook 6500 And Va Information Security Knowledge Service Requirements. g. The Contractor Shall Conduct An Annual Privacy And Security Self-assessment On All Information Systems And Outsourced Services As Required. Copies Of The Assessment Shall Be Provided To The Cor/co. The Va/government Reserves The Right To Conduct Assessment Using Government Personnel Or A Third-party If Deemed Necessary. The Contractor Shall Correct Or Mitigate Any Weaknesses Discovered During The Assessment. h. Va Prohibits The Installation And Use Of Personally Owned Or Contractor-owned Equipment Or Software On Va Information Systems. If Non-va Owned Equipment Must Be Used To Fulfill The Requirements Of A Contract, It Must Be Stated In The Service Agreement, Sow, Pws, Pd Or Contract. All Security Controls Required For Government Furnished Equipment Must Be Utilized In Va Approved Other Equipment (oe). Configuration Changes To The Contractor Oe, Must Be Funded By The Owner Of The Equipment. All Remote Systems Must Use A Va-approved Antivirus Software And A Personal (host-based Or Enclave Based) Firewall With A Va-approved Configuration. The Contractor Shall Ensure Software On Oe Is Kept Current With All Critical Updates And Patches. Owners Of Approved Oe Are Responsible For Providing And Maintaining The Anti-virus Software And The Firewall On The Non-va Owned Oe. Approved Contractor Oe Will Be Subject To Technical Inspection At Any Time. i. The Contractor Shall Notify The Cor/co Within One Hour Of Disclosure Or Successful Exploits Of Any Vulnerability Which Can Compromise The Confidentiality, Integrity, Or Availability Of The Information Systems. The System Or Effected Component(s) Need(s) To Be Isolated From The Network. A Forensic Analysis Needs To Be Conducted Jointly With Va. Such Issues Will Be Remediated As Quickly As Practicable, But In No Event Longer Than The Timeframe Specified By Va Information Security Knowledge Service. If Sensitive Personal Information Is Compromised Reference Va Handbook 6500.2 And Section 5, Security Incident Investigation. j. For Cases Wherein The Contractor Discovers Material Defects Or Vulnerabilities Impacting Products And Services They Provide To Va, The Contractor Shall Develop And Implement Policies And Procedures For Disclosure To Va, As Well As Remediation. The Contractor Shall, Within 30 Business Days Of Discovery, Document A Summary Of These Vulnerabilities Or Defects. The Documentation Will Include A Description Of The Potential Impact Of Each Vulnerability And Material Defect, Compensating Security Controls, Mitigations, Recommended Corrective Actions, Fbonotice Cause Analysis And/or Workarounds (i.e., Monitoring). Should There Exist Any Backdoors In The Products Or Services They Provide To Va (referring To Methods For Bypassing Computer Authentication), The Contractor Shall Provide the Va Co/co Written Assurance They Have Permanently Remediated These Backdoors. k. All Other Vulnerabilities, Including Those Discovered Through Routine Scans Or Other Assessments, Will Be Remediated Based On Risk, In Accordance With The Remediation Timelines Specified By The Va Information Security Knowledge Service And/or The Applicable Timeframe Mandated By Cybersecurity & Infrastructure Security Agency (cisa) Binding Operational Directive (bod) 22-01 And Bod 19-02 For Internet-accessible Systems. Exceptions To This Paragraph Will Only Be Granted With The Approval Of The Cor/co. 8. Security And Privacy Controls Compliance Testing, Assessment and Auditing. This Entire Section Applies Whenever Section 6 Or 7 Is Included. a. Should Va Request It, The Contractor Shall Provide A Copy Of Their (corporation S, Sole Proprietorship S, Partnership S, Limited Liability Company (llc), Or Other Business Structure Entity S) Policies, Procedures, Evidence And Independent Report Summaries Related To Specified Cybersecurity Frameworks (international Organization For Standardization (iso), Nist Cybersecurity Framework (csf), Etc.). Va Or Its Third-party/partner Designee (if Applicable) Are Further Entitled To Perform Their Own Audits And Security/penetration Tests Of The Contractor S It Or Systems And Controls, To Ascertain Whether The Contractor Is Complying With The Information Security, Network Or System Requirements Mandated In The Agreement Between Va And The Contractor. b. Any Audits Or Tests Of The Contractor Or Third-party Designees/partner Va Elects To Carry Out Will Commence Within 30 Business Days Of Va Notification. Such Audits, Tests And Assessments May Include The Following: (a): Security/penetration Tests Which Both Sides Agree Will Not Unduly Impact Contractor Operations; (b): Interviews With Pertinent Stakeholders And Practitioners; (c): Document Review; And (d): Technical Inspections Of Networks And Systems The Contractor Uses To Destroy, Maintain, Receive, Retain, Or Use Va Information. c. As Part Of These Audits, Tests And Assessments, The Contractor Shall Provide All Information Requested By Va. This Information Includes, But Is Not Limited To, The Following: Equipment Lists, Network Or Infrastructure Diagrams, Relevant Policy Documents, System Logs Or Details On Information Systems Accessing, Transporting, Or Processing Va Data. d. The Contractor And At Its Own Expense, Shall Comply With Any Recommendations Resulting From Va Audits, Inspections And Tests. Va Further Retains The Right To View Any Related Security Reports The Contractor Has Generated As Part Of Its Own Security Assessment. The Contractor Shall Also Notify Va Of The Existence Of Any Such Security Reports Or Other Related Assessments, Upon Completion And Validation. e. Va Appointed Auditors Or Other Government Agency Partners May Be Granted Access To Such Documentation On A Need-to-know Basis And Coordinated Through The Cor/co. The Contractor Shall Comply With Recommendations Which Result From These Regulatory Assessments On The Part Of Va Regulators And Associated Government Agency Partners. 9. Product Integrity, Authenticity, Provenance, Anti-counterfeit And Anti-tampering. This Entire Section Applies When The Acquisition Involves Any Product (application, Hardware, Or Software) Or When Section 6 Or 7 Is Included. a. The Contractor Shall Comply With Code Of Federal Regulations (cfr) Title 15 Part 7, Securing The Information And Communications Technology And Services (icts) Supply Chain , Which Prohibits Icts Transactions From Foreign Adversaries. Icts Transactions Are Defined As Any Acquisition, Importation, Transfer, Installation, Dealing In Or Use Of Any Information And Communications Technology Or Service, Including Ongoing Activities, Such As Managed Services, Data Transmission, Software Updates, Repairs Or The Platforming Or Data Hosting Of Applications For Consumer Download. b. When Contracting Terms Require The Contractor To Procure Equipment, The Contractor Shall Purchase Or Acquire The Equipment From An Original Equipment Manufacturer (oem) Or An Authorized Reseller Of The Oem. The Contractor Shall Attest That Equipment Procured From An Oem Or Authorized Reseller Or Distributor Are Authentic. If Procurement Is Unavailable From An Oem Or Authorized Reseller, The Contractor Shall Submit In Writing, Details Of The Circumstances Prohibiting This From Happening And Procure A Product Waiver From The Va Cor/co. c. All Contractors Shall Establish, Implement, And Provide Documentation For Risk Management Practices For Supply Chain Delivery Of Hardware, Software (to Include Patches) And Firmware Provided Under This Agreement. Documentation Will Include Chain Of Custody Practices, Inventory Management Program, Information Protection Practices, Integrity Management Program For Sub-supplier Provided Components, And Replacement Parts Requests. The Contractor Shall Make Spare Parts Available. All Contractor(s) Shall Specify How Digital Delivery For Procured Products, Including Patches, Will Be Validated And Monitored To Ensure Consistent Delivery. The Contractor Shall Apply Encryption Technology To Protect Procured Products Throughout The Delivery Process. d. If A Contractor Provides Software Or Patches To Va, The Contractor Shall Publish Or Provide A Hash Conforming To The Fips Security Requirements For Cryptographic Modules (fips 140-2 Or Successor). e. The Contractor Shall Provide A Software Bill Of Materials (sbom) For Procured (to Include Licensed Products) And Consist Of A List Of Components And Associated Metadata Which Make Up The Product. Sboms Must Be Generated In One Of The Data Formats Defined In The National Telecommunications And Information Administration (ntia) Report The Minimum Elements For A Software Bill Of Materials (sbom). f. Contractors Shall Use Or Arrange For The Use Of Trusted Channels To Ship Procured Products, Such As U.s. Registered Mail And/or Tamper-evident Packaging For Physical Deliveries. g. Throughout The Delivery Process, The Contractor Shall Demonstrate A Capability For Detecting Unauthorized Access (tampering). h. The Contractor Shall Demonstrate Chain-of-custody Documentation For Procured Products And Require Tamper-evident Packaging For The Delivery Of This Hardware. summary: this Is A Sources Sought Notice And Not A Request For Quotes. This Request Is Solely For The Purpose Of Conducting Market Research To Enhance Vha S Understanding Of The Market S Offered Products, Services, And Capabilities. The Government Will Not Pay Any Costs For Responses Submitted In Response To This Sources Sought. this Sources Sought Notice Provides An Opportunity For Respondents To Submit Their Notice Of Ability, And Their Available Products And Services In Response To The Requirement. Vendors Are Being Invited To Submit Information Relative To Their Potential Of Fulfilling This Requirement In The Form Of A Capability Response That Addresses The Specific Requirement Identified In This Sources Sought. this Sources Sought Is To Facilitate The Contracting Officer S Review Of The Market Base, For Acquisition Planning, Size Determination, And Procurement Strategy. response Commitment: i. Response: all Potential Sources Are Invited To Submit, In Writing, A Capability Statement With Sufficient Information To Substantiate Your Business Is Reasonably Capable Of Performing The Work. The Capability Statement Must Clearly Demonstrate A Business S Ability To Fulfill The Requirement. The Burden Of Proof Rests With The Contractor; Therefore, Written Responses Must Provide Clear And Unambiguous Evidence To Substantiate Capabilities Appropriate To Satisfy This Need. a. Capability Statement With General Understanding Of The Industry And Current Knowledge And Subcontract Networks That Would Be Used To Support The Requirement As Identified Herein. Subcontractors Will Need The Security Requirements Listed In This Sources Sought. Submittals Furnished Will Not Be Returned To The Sender. No Debriefs Will Be Conducted. Eligibility In Participating In A Future Acquisition Does Not Depend Upon A Response To This Notice. responses Shall Provide Administrative Information, And Shall Include The Following As A Minimum: Company Name, Sam Uei Number, Company Mailing Address, Phone Number, Fax Number, Name And Title Of Designated Point Of Contact And E-mail Of Designated Point Of Contact. company Business Size And Status (i.e., Large Business, Small Business, Service-disabled Veteran Owned Small Business, Women-owned Small Business, Etc.), The Number Of Years In Business. b. Proprietary Information Is Neither Requested Nor Desired. If Such Information Is Submitted, It Must Clearly Be Marked "proprietary" On Every Sheet Containing Such Information, And The Proprietary Information Must Be Segregated To The Maximum Extent Practicable From Other Portions Of The Response (e.g., Use An Attachment Or Exhibit). submit Responses Email Only To Karly.gabrysiak@va.gov ii. Timeline: a. This Request Will Close On 01/06/2025 At 8am Est. notes: 1. This Sources Sought Is For Planning Purposes Only, And Does Not Constitute A Commitment, Implied Or Otherwise, That A Procurement Action Will Follow. The Department Of Veterans Affairs Will Use The Information Submitted In Response To This Notice At Its Discretion And Will Not Provide Comments To Any Submission; However, The Department Of Veterans Affairs Reserves The Right To Contact Any Respondent To This Notice For The Sole Purpose Of Enhancing The Department Of Veteran Affairs Understanding Of The Notice Submission. 2. The Content Of Any Responses To This Notice May Be Reflected In Any Subsequent Solicitation, Except For Content Marked Or Designated As Business Confidential Or Proprietary Which Will Be Fully Protected From Release Outside The Government. the Department Of Veteran Affairs Contracting Office Point Of Contact: name: Karly Gabrysiak title: Contract Specialist e-mail Address: Karly.gabrysiak@va.gov

Details: Description Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-231 Bidding December 10, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Seven (7) Months Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 1 1 Lot Various Materials For Smart City Command Center 15,500,000.00 22 Unit 16 Port Poe Switch - 16 Port Poe Switch - Cpu Core Count 1 Cpu Nominal Frequency 800 Mhz Size Of Ram 256 Mb Storage Size 16 Mb Storage Type Flash Mtbf Approximately 200'000 Hours At 25c Cooling Type Passive Poe-out Ports Ether1-ether16 Poe Out 802.3af/at Max Out Per Port Output (input 18-30 V) 1.1 A Max Out Per Port Output (input 30-57 V) 0.6 A Max Total Out (a) 2.8a (18v-30v) & 1.4a (48v-57v) X2 10/100/1000 Ethernet Ports 16 Number Of 1g Ethernet Ports With Poe-out 16 Sfp+ Ports 2 Certification Ce, Eac, Rohs Ip Ip54 Warranty ：1 Year 88 Unit Adjustable Stainless Steel Strapping Band - Adjustable Stainless Steel Strapping Band - Material: Stainless Steel 304 Width: 1/2 Inch Thickness: 0.5 Mm Length: 30 Meters 44 Unit Cable Loop Holder - Cable Loop Holder - Galvanized Steel Pole Mountable 4 Branches At Least 400mmx400mm 1 Box Cat6 Utp Pure Copper Outdoor Cable - Cat6 Utp Pure Copper Outdoor Cable - Cat6 Utp Pure Copper Outdoor Cable 40 Unit Cctv Channel License - Cctv Channel License - Single Anpr Camera Connection For Use With Central Software Warranty ：perpetual Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 1 Of 12 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-231 Bidding December 10, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Seven (7) Months Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 40 Unit Cctv Lpr Camera - Cctv Lpr Camera - Camera Image Sensor 1/1.8″ Progressive Scan Cmos Max. Resolution 2688 × 1520 Min. Illumination Color: 0.001 Lux @ (f1.2, Agc On) Shutter Time 1/25 S To 1/100,000 S Day & Night Ir Cut Filter Lens Focal Length & Fov 2.8-12 Mm: Horizontal: 113.5° To 39°, Vertical: 58.4° To 22.7°, Diagonal: 141.3° To 44.3° Aperture 2.8-12 Mm: F1.38, 8-32 Mm: F1.7, 10-50 Mm: F1.7 Illuminator Built-in Supplement Light Type Ir Light Built-in Supplement Light Range Up To 40 M Ir Wavelength 850 Nm Video Main Stream 50 Hz: 25 Fps (2688 × 1520, 1920 × 1080, 1280 × 760, 704 × 576, 352 × 288) 60 Hz: 30 Fps (2688 × 1520, 1920 × 1080, 1280 × 760, 704 × 576, 352 × 288) Sub-stream 50 Hz: 25 Fps (1920 × 1080, 1280 × 760, 704 × 576, 352 × 288) 60 Hz: 30 Fps (1920 × 1080, 1280 × 760, 704 × 576, 352 × 288) Video Compression H.264 And H.265 Encoding Main Stream: H.265/h.264/mjpeg Sub-stream: H.265/h.264/mjpeg Video Bit Rate 32 Kbps To 16 Mbps Protocols Tcp/ip,icmp,http,https,ftp,sftp,dhcp,dns,ddns,rtp,rtsp,rtcp,ntp,smtp,snmp,igmp,qos,ipv4/ipv6,udp,ssl/tls,isup,arp,802.1x Simultaneous Live View Up To 6 Channels Road Traffic And Vehicle Detection Coverage Up To 3 Lane(s) Smart Function Traffic Flow Detection：average Speed, Traffic Flow, Queuing Length, And Traffic Status Incident Detection: Congestion, Stopped Vehicle, Lane Change, Wrong-way Driving, Speeding, Low-speed Driving Capture Speed Range 5 To 120 Km/h Blocklist And Allowlist Max. 50000 Records Warranty ：2 Years Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 2 Of 12 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-231 Bidding December 10, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Seven (7) Months Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 5 Unit Cctv Nvr - Cctv Nvr - Supports Redundant Power Supply To Improve The System Stability Supports Hdd Hot Swap With Raid0, Raid1, Raid5, Raid 6, And Raid10 Storage Scheme Configurable. Either Normal Or Hot Spare Working Mode Is Configurable To Constitute An N+1 Hot Spare System. Supports Some Specialist Cameras, Including People Counting Camera/anpr (automatic Number Plate Recognition) Camera/fisheye Camera Supports Video Analytic Functions Such As Vehicle Detection, License Plate Recognition --video & Audio Input -ip Video Input 128-ch -incoming/outgoing Bandwidth 576 Mbps/512 Mbps -incoming/outgoing Bandwidth (raid Mode) 576 Mbps/512 Mbps -tls Outgoing Bandwidth 128 Mbps, Or 64 Mbps (when Raid Is Enabled) --video & Audio Output -protocol Hikvision, Acti, Arecont, Axis, Bosch, Brickcom, Canon, Hunt, Onvif (version 2.5), Panasonic, Pelco, Rtsp, Samsung, Sony, Vivotek, Zavio --video & Audio Output -hdmi Output Two Independent Hdmi Outputs Of 4k Resolution. Resolution: 4k (4096 × 2160), 4k (3840 × 2160)/30hz, 2k (2560 × 1440)/60hz, 1080p (1920 × 1080)/60hz, Uxga (1600 × 1200)/60hz, Sxga (1280 × 1024)/60hz, 720p (1280 × 720)/60hz, Xga (1024 × 768)/60hz -vga Output 1-ch. Resolution: 1080p (1920 × 1080)/60hz, Uxga (1600 × 1200)/60hz, Sxga (1280 × 1024)/60hz, 720p (1280 × 720)/60hz, Xga (1024 × 768)/60hz --video & Audio Decoding -decoding Format H.265, H.265+, H.264, H.264+, Mpeg4, Mjpeg (for Hikvision Ip Camera Only) -video Resolution 32 Mp/24 Mp/12 Mp/8 Mp/7 Mp/6 Mp/5 Mp/4 Mp/3 Mp/1080p/uxga/720p/vga/4cif/dcif/2cif/cif/qcif *: 32 Mp And 24 Mp Is Only Available For Channel 1 To 4 When Ultra Hd Resolution Mode Is Enabled -synchronous Playback Up To 16 Channels -capability 1-ch@32 Mp (8160 × 3616, 30 Fps)/5-ch@8 Mp(30 Fps)/10-ch@4 Mp(30fps)/20-ch@1080p(30 Fps)/40-ch@720p(30 Fps) *: The Length Or Width Of Camera Resolution (each Track) Cannot Exceed 4096 Pixels --hdd -interface 16 Sata Interfaces Supporting Hot-plug -capacity Up To 10 Tb For Each Hdd -storage Extension 1 × Esata Interface, 2 × Mini Sas Interface (optional) --raid Raid Type Raid0, Raid1, Raid5, Raid 6, And Raid10 --network Management -protocol Ipv6, Https, Upnp, Snmp, Ntp, Sadp, Smtp, Nfs, Iscsi, Pppoe, Ddns Network Interface 4, Rj45 10m/100m/1000m Self-adaptive Ethernet Interface --external Interface -usb Interface Front Panel: 2 × Usb 2.0; Rear Panel: 2 × Usb 3.0 Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 3 Of 12 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-231 Bidding December 10, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Seven (7) Months Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) -alarm Input/output 16/8 --general -power Supply 100 To 240 Vac, 50 To 60hz, 5 A -fan Redundant Dual Ball Bearing Fan; Speed Adjustable -consumption (without Hdd) ≤ 140w -warranty ：2 Years 1. Responsibility Of The Supplier 1.1 Supply And Delivery Of Ict Equipment 1.2 Inventory Of The Items Deliverd With The Following Details 1.2.1 Brand 1.2.2 Model 1.2.3 Serial Number 1.2.4 Quantity 1.3 The Bidder Must Ensure That All Components Delivered Will Be Brand New 1.4 All Equipment Provided Must Be Compatible And Working With The Cctv System As A Whole 1.5 Materials And Equipment Delivery Within 90 Days 1.6 Cctv Contractor Should Have Manufacture Authorization And Certification. 1.7 Contractor Must Have A Valid Iso 9001:2015 Certificate 1.8 All Equipment Provided Must Be Capable/compatible To Interconnect With The Existing Systems Located At The Smart City Command Center (sc3) To Be Viewable And Configurable In The Sc3. 80 Unit Cctv Nvr Surveillance Hard Drive - Designed And Built To Handle Heavy Surveillance Workloads Advanced Vibration Management Capacity 10tb Interface Sata 6 Gb/s Max. Sustained Transfer Rate Od (mb/s) 250mb/s Cache (mb) 256 Tarnish Resistant Yes Mtbf 1,500,000 Hr Warranty ：2 Years 15 Set Command Center Desktop Computer - Minimum Specifications: Operating System: Microsoft Windows 11 Pro 64bit Processor: Intel Core I5 14600k Turbo Frequency 5.3ghz 14 Cores/20 Threads, 24mb Cache, Socket Lga1700 Cpu Air Cooler: Twin Tower Cpu Air Cooler, With 6x6mm Sintered Copper Heatpipes, With 2x140mm Fans Motherboard: B760 Chipset, Lga1700 Socket, Ddr5 4xdimm Matx Form Factor Ram: Ddr5 5600mhz, 32gb (dual 2x16gb) Memory Modules Gpu: Rtx 4070, 12gb Gddr6/gddr6x Ssd: 512gb Capacity R/w 560/520 Mb/s 3d Tlc Ssd 2.5 Inch Form Factor Hdd: Capacity 2tb, 7200 Rpm, 256mb Cache, 3.5 Inch Form Factor Power Supply: 1000 Watts, 80 Plus Gold Certified, Fully Modular, With 120mm Smart Hydraulic Bearing (hyb) Fan, With Active Pfc, Mtbf: >100,000 Hours Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 4 Of 12 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-231 Bidding December 10, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Seven (7) Months Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) Case: Tempered Glass Mid Tower Atx Case With At Least 3 Fans Monitor: 2 Units, 24 Inches, Resolution: Fhd 1920 X1080, Aspect Ratio:16:9, Brightness: 250cd, Color Gamut Ntsc 72%, Refresh Rate: 100hz, Response Time: 5ms(gtg), Connectivity: 1x Hdmi 1x Displayport Keyboard: Usb Connectivity, With Backlight, Rubber Dome, Usb Connectivity, Multi-key Anti-ghosting, Polling Rate: 1000hz, Cable Type: Attached, Braided, Cable Length: 5.9ft Mouse: Usb Connectivity, Optical Sensor, Mouse Button Durability: 30m L/r Click, Cable: 1.8m Tangle Free Rubber, Dpi: 12,400 Dpi Ups: Max Configurable Power (watts) 650 Watts / 1.2kva, At Least 3 Universal Socket Warranty ：2 Years 2 Unit Command Center Field Laptop - Command Center Field Laptop - Intel Core I7-13700hx Processor (30 Mb Smart Cache, 2.1 Ghz Performance-core With Turbo Boost Max Technology 3.0 Up To 5.0 Ghz, Overclock Capable) 1x 16gb Of Ddr5 4800mhz System Memory, Upgradable To 32 Gb Using Two Sodimm Modules 2x 512gb Nvme Ssd; Total Of 1tb 16 Display With Ips (in-plane Switching) Technology, Wqxga 2560 X 1600, High-brightness (500 Nits) Nvidia® Geforce Rtx 4060 With 8 Gb Of Dedicated Vram Warranty ：2 Years 2 Unit Command Center Printer - Command Center Printer - A3 Wi-fi Duplex All-in-one Ink Tank Printer Print Speed Of Up To 25.0 Ipm Prints Up To A3+ (for Simplex) Automatic Duplex Printing Ultra-high Page Yield Of 7,500 Pages (black) And 6,000 Pages (colour) Wi-fi, Wi-fi Direct, Ethernet Printer Type: Print, Scan, Copy, Fax With Adf Minimum Ink Droplet Volume: 3.8 Pl Print Direction: Bi-directional Printing Nozzle Configuration:800 X 1 Nozzles Black, 256 X 1 Nozzles Per Colour (cyan, Magenta, Yellow) Maximum Resolution: 4800 X 2400 Dpi Automatic 2-sided Printing: Yes (up To A3) Print Speed: Photo Default - 10 X 15 Cm / 4 X 6 " *1: Approx. 43 Sec Per Photo (border) / 52 Sec Per Photo (borderless)*2 Draft, A4 (black / Colour): Up To 32.0 Ppm / 22.0 Ppm *2 Iso 24734, A4 Simplex (black / Colour): Up To 25.0 Ipm / 12.0 Ipm *2 Iso 24734, A4 Duplex (black / Colour): Up To 16.0 Ipm / 9.0 Ipm *2 Iso 24734, A3 Simplex (black / Colour): Up To 13.5 Ipm / 6.0 Ipm *2 Iso 24734, A3 Duplex (black / Colour): Up To 10.0 Ipm / 5.0 Ipm *2 Warranty ：1 Year Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 5 Of 12 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-231 Bidding December 10, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Seven (7) Months Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 1 Unit Command Center Video Wall Controller - Command Center Video Wall Controller - Interface Alarm In Alarm Out 8-ch Alarm Out 8-ch Alarm In Serial Interface Rs-232 (rj45) × 1, Rs-485 × 1 Usb Interface Usb 2.0 × 2 Network Interface Rj45 × 2, 10 M/100 M/1000 Mbps Self-adaptive Ethernet Interface Optic Interface × 2 100 Base-fx/1000 Base-x Supports Optoelectronic Self-adaptation Video Walls 1 Video Wall Size <= 8 Layers Per Screen 1080p × 3 Or 4k × 1.5 Layers Layers Per Screen × Output Interface(s) Split Window Yes Scene Auto-switch Delay 3s Auto-switching Plans Support 256 Auto-switching Plans Max. Input Resolution 4k Audio Encoding Format G722.1, G711u, G711a, Aac-lc Video Output Interface Type Hdmi 1.4 Video Output Interface(s) 8 Video Decoding Resolution Up To 32 Mp Warranty：2 Years 8 Unit Command Center Video Wall Display - Command Center Video Wall Display - Display Panel Diagonal Size Class 55 Measured 54.6 Resolution 3,840 X 2,160 (16:9) Brightness (typ.) 700 Nit Orientation Landscape/portrait Haze 25% Contrast Ratio (typ.) 4,000:1 Type Va Active Display Area 1,209.6 (h) X 680.4 (v) Pixel Pitch (mm) 0.315 X 0.315 Color Gamut Ntsc 72% Operation Hour 24/7 Connectivity / Sound Input Video Dp 1.2 (1), Hdmi 2.0 (3) Audio N/a Usb Usb 2.0 X 2 Tuner N/a Output Audio Stereo Mini Jack Wifi / Bt O/o External Control Rs232c (in/out), Rj45 Speaker 10w 2ch Mechanical Spec Dimension (mm / In.) With Heavy Duty Full Motion Tv Wall Mount Warranty ：3 Year 44 Unit Din Rail Mount - Din Rail Mount - 35mm At Least 7.5mm Depth Aluminum 22 Unit Electrical Box Enclosure - Electrical Box Enclosure - Electricalbox Panel Box Metal Enclosure(ip66, Nema 4 & 12) 300x250x150 Mm W/ 2 Fans And Fan Filter With Pole Mount Bracket X1 Molded Case Circuit Breaker Mccb30a 220v 2 Pole Din Rail Mount Type X1 Residual Current Circuit Breaker 63a 220v With Grounding/earthing 2 Pole Din Rail Mount Type X1 Grounding Bus Bar With Insulator X1 Din Rail Mount Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 6 Of 12 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-231 Bidding December 10, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Seven (7) Months Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 40 Roll Fiber Optic Connectivity - Fiber Optic Connectivity - Fiber Optic Connectivity 2.0 Kms 4 Core Fiber Optic Cable Maintenance Of Outside And Inside Plant Equipment To Smart City Command Center For 1 Year 1 Unit Fiber Optic Fusion Equipment - Fiber Optic Fusion Equipment - Fiber Alignment Core/cladding Motor Number 6 Motors Splicing Time 5s Heating Mode 15s, Can Be Customized According To The External Environment Fiber Type Single-mode Fiber (smf/g.652), Bif/g.657); Suitable For Single Mode, Multi-mode, Bare Fiber, Tail Fiber, Drop Cable, Jumper, Invisible Fiber Fusion; The Cladding Diameter 80-150μm Splicing Loss 0.02db（sm）、0.01db（mm）0.04db（ds/nzds） Splicing Mode Automatic Focusing Core Alignment, Conventional/high Precision Welding Splicing Way Automatic, Semi-automatic Opm Wavelength: 850nm、1300nm、1310nm、1490nm、1550nm、1625nm、980nm、1270nm、1577nm、1650nm/measurement Range: -50+26dbm Absolute Error: <0.3db (-50dbm ~+3dbm Range) Battery Capacity 7800mah Large Capacity Lithium Battery Charging Time ≤3.5; It Can Continuously Weld And Heat About 260 Cores Magnification 320x (x Or Y Axis Single Display) 200x (x And Y Axis Dual Display) Fiber Diameter Coating Diameter: 80-150μm/coating Diameter: 100-1000μm Cutting Length Coating Layer 250μm Below: 8-16mm/coating Layer 250-1000μm: 16mm Heat Shrink Tube 60mm、50mm、40mm、25mm Tensile Testing Standard 2n Display 5 Inch Tft Color Display Screen Return Loss Better Than 60 Db Product Protection Waterproof, Dustproof And Fall Proof Warranty ：1 Year 44 Unit Fiber Patch Cord Single-mode 9/125 Sc/upc To Lc/upc - Fiber Patch Cord Single-mode 9/125 Sc/upc To Lc/upc - Fiber Patch Cord Single-mode 9/125 Sc/upcto Lc/upc3 Meter 44 Unit Fiber Patch Cord Single-mode Sc/upc To Sc/upc - Fiber Patch Cord Single-mode Sc/upc To Sc/upc - Fiber Patch Cord Single-mode Sc/upcto Sc/upc3 Meter 45 Unit Gigabit Rj-45 Surge Protector Arrester - Gigabit Rj-45 Surge Protector Arrester - Protects Your Ethernet Device From The Damage Of Lightning & Surge Gigabit 10/100/1000 Specification: Connectors: Rj-45 Material: Shielded Aluminum Alloy 44 Unit Grounding Bus Bar With Insulator - Grounding Bus Bar With Insulator - Grounding Bus Bar With Insulatorat Least 8 Way At Least 8x12mm² 2 Roll Grounding Cable Pure Copper Wire - Grounding Cable 4mm Pure Copper Wire Round Solid 100m Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 7 Of 12 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-231 Bidding December 10, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Seven (7) Months Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 22 Unit Grounding Rod And Clamp Copper Plated - Grounding Rod And Clamp Copper Plated - "grounding Rod Full Set - (1pc Grounding Rod + 1 Pc Grounding Clamp) Size: Approximately 50cm Length X 0.9cm Diameter" 22 Unit Heavy Duty Surface Type Extension Outlet 4 Gang - Heavy Duty Surface Type Extension Outlet 4 Gang - Heavy Duty Surface Type Extension Outlet 4 Gang 15 Amperes Capacity/ Maximum 3,750watts 1 Lot Installation, Integrations And Configuration Of Outside Plant Equipment - Installation, Integrations And Configuration Of Outside Plant Equipment - Installation, Integrations And Configuration Of All Outside Plant Project Equipment In Outside Project Sites Outside Of The Smart City Command Center 1 Lot Installation, System Integrations And Configuration Of All Inside Plant Project Equipment - Installation, System Integrations And Configuration Of All Inside Plant Project Equipment In The Smart City Command Center Such As The Hikcentral Camera License, Integration To Existing Hikcentral Software And Integration Of Existing Cctv Cameras Into New Nvr 22 Unit Iot Box Panelbox Metal Enclosure (ip66,nema4 & 12) 500x300x200mm W/ 2 Fans And Fan Filter With Pole Mount Bracket X1 Heavy Duty Surface Type Extension Outlet 4 Gang Terminal Block Distribution 2 Input 4 Output Push-in Type 40 Unit Lpr Camera Arm Mount - Gi Pipe Extension Arm 1.5-3 Meters 40 Unit Lpr Camera Memory Card - Product Capacity Covering 128g The Storage Mediumis Tlc Particles Long Reading And Writing Times, Which Can Meet More Than 1000 Cycles Optimized For Long Time On-board Video Recording, Offering More Stable Reading And Writing Experience Operating Voltage 2.7v~3.6v Compatibility Sd 6.1 Working Life 1,000 Cycles Storage Medium Tlc Speed Class Write/read Speed 64gb：up To 35/100mb/s 128gb：up To 70/100mb/s256gb：up To 90/100mb/s Durability 10,000 Insertion/removal Cycles Uhs-i Sdr104 Type Sdxc 40 Unit Lpr Camera Vertical Pole Mount - Vertical Pole Mounting Bracket Installed On The Cross Bar Galvanized Steel Sheet And Steel Material With Surface Spray Treatment Can Be Used For New Bullet Camera Outdoor Greycolo Must Be Compatible With Cctv Camera 22 Roll Metal Flexible Conduit 1 Inch - Metal Flexible Conduit 1 Inch 30 Meters Per Roll 44 Unit Molded Case Circuit Breaker Mccb 30a - Molded Case Circuit Breaker Mccb 30a 220v 2 Pole Din Rail Mount Type 22 Unit Molded Case Circuit Breaker Mccb 63a - Molded Case Circuit Breaker Mccb 63a 220v 2 Pole Din Rail Mount Type 22 Unit Poe Switch Power Supply - Power Supply 48v 2a 96w With Us Plug Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 8 Of 12 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-231 Bidding December 10, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Seven (7) Months Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 22 Unit Residual Current Circuit Breaker 63a 220v - Residual Current Circuit Breaker 63a 220v With Grounding/earthing 2 Pole Din Railmount Type 44 Unit Sfp+ Module Lc Connector Type - Gigabit Single-mode Wdm Bi-directional Sfp Module Spec: Lc Connector, Tx:1550nm/rx:1310nm, Single-mode, 20 Km 7 Roll Solidwire Awg#12 - Solidwire Awg#12 75m Per Roll Use For Termination Inside Iot Box 7 Roll Solidwire Awg#16 - Solid Wire Awg#16 75m Per Roll Use For Termination Inside Iot Box 66 Unit Terminal Block Distribution 2 Input 4 Output - Terminal Block Distribution 2 Input 4 Output Push-in Type This Is A Lot Bidding, Partial Bids Are Not Allowed Please Indicate Brands Of Offers And Attach Complete Technical Brochures In The Eligibility And Technical Proposal Please Indicate Unit Prices Of Offers In The Financial Proposal Bidders Must Possess Valid Mayor's/business Permit With A Relevant Line Of Business For Use Of Cmo Mitd Under Pr No. 1 Please Refer To Attached Terms Of Reference In The Associated Components Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature

Details: Description Invitation To Bid For The Supply And Delivery Of Various Common-used Office Supplies 1. The Department Of Agriculture - Regional Field Office 1 (da-rfo 1), Through The Gaa Fy 2025 Intends To Apply The Sum Of Six Million Two Hundred Ninety-four Thousand One Hundred Twenty-two Pesos And Fifty Centavos (php6,294,122.50) Being The Approved Budget For The Contract (abc) To Payment Under The Contract For The Supply And Delivery Of Various Common-used Office Supplies With Project Identification Number Da-rfo 1-2025-goods-033. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Da-rfo 1 Now Invites Bids For The Above-mentioned Procurement Project With The Following Details And Minimum Specifications, To Wit: Item No. Specifications Qty. Unit Unit Cost Total Cost 1 Automatic Voltage Regulator (avr), 3000w 4 Unit 5,500.00 22,000.00 2 Battery Charger For Aa & Aaa, With Aa Rechargeable Battery 54 Pc 1,700.00 91,800.00 3 Battery, Aa, Alkaline, 4pcs/pack 132 Pack 90.00 11,880.00 4 Battery, Aa, Rechargeable 2pcs/pack (2450 Mah) 63 Pack 700.00 44,100.00 5 Battery, Aaa, Alkaline 4pcs/pack 141 Pack 120.00 16,920.00 6 Battery, Aaa, Rechargeable 2pcs/pack (800 Mah) 9 Pack 500.00 4,500.00 7 Cfl Bulb 18 Watts 59 Pc 200.00 11,800.00 8 Extension Outlet 4 Gang W/ Switch (1.5m) 18 Unit 950.00 17,100.00 9 Flashlight, Rechargeable 5 Pc 400.00 2,000.00 10 Laser Pointer Presenter 7 Pc 800.00 5,600.00 11 Led, Lightbulb (daylight 9 Watt) 70 Pc 200.00 14,000.00 12 Tape, Electrical, 19mm X 16mm 32 Pc 60.00 1,920.00 13 Universal Extension Wheel (10m) 12 Unit 2,200.00 26,400.00 14 Universal Outlet Extension Cord, 6 Gang W/ Switch, 2-3 Meters Cord Length 17 Unit 1,200.00 20,400.00 15 Alcohol (500ml, Isoprophyl 70%) 343 Bot 110.00 37,730.00 16 Alcohol (gal, Isoprophyl 70%) 46 Gal 600.00 27,600.00 17 Ballpen, 0.5mm, Fine Black 4193 Pc 10.00 41,930.00 18 Ballpen, 0.5mm, Fine Blue 2616 Pc 10.00 26,160.00 19 Ballpen, 0.5mm, Fine Red 139 Pc 10.00 1,390.00 20 Ballpen, 0.7mm, Fine, Black 1188 Pc 12.00 14,256.00 21 Ballpen, 0.7mm, Fine, Blue 1142 Pc 12.00 13,704.00 22 Ballpen, 0.7mm, Fine, Red 50 Pc 12.00 600.00 23 Ballpen, Bp-s Fine, Black 679 Pc 25.00 16,975.00 24 Ballpen, Bp-s Fine, Blue 406 Pc 25.00 10,150.00 25 Ballpen, Bp-s Fine, Red 174 Pc 25.00 4,350.00 26 Bank Envelope (11 X 7 Inch) 75 Pc 3.50 262.50 27 Bond Paper, (11"x17") Tabloid Size, Subs 24 / 80 Gsm 20 Ream 550.00 11,000.00 28 Bond Paper, (8.5x11) Letter, Subs 20 / 70 Gsm 78 Ream 280.00 21,840.00 29 Bond Paper, (8.5x11) Letter, Subs 24 / 80 Gsm 49 Ream 320.00 15,680.00 30 Bond Paper, (8.5x13) Legal, Subs 20 / 70 Gsm 686 Ream 300.00 205,800.00 31 Bond Paper, (8.5x13) Legal, Subs 24 / 80 Gsm 490 Ream 350.00 171,500.00 32 Bond Paper, A3, Subs. 20 / 70 Gsm 50 Ream 465.00 23,250.00 33 Bond Paper, A3, Subs. 24 / 80 Gsm 20 Ream 530.00 10,600.00 34 Bond Paper, A4, Subs 20 / 70 Gsm 904 Ream 290.00 262,160.00 35 Bond Paper, A4, Subs 24 / 80 Gsm 558 Ream 330.00 184,140.00 36 Book Ends, Metal 5 Pair 200.00 1,000.00 37 Carbon Paper, Long 2 Pack 195.00 390.00 38 Cartolina, White, 20pcs/pack 15 Pack 90.00 1,350.00 39 Certificate Holder, A4 Size W/ Plastic Cover 623 Pc 50.00 31,150.00 40 Clear Folder, Morocco Long, Blue 30 Book 22.00 660.00 41 Clear Folder, Morocco Short, Blue 10 Book 20.00 200.00 42 Clearbook Refil, 20 Holes, 10pcs/pack 10 Pack 50.00 500.00 43 Clip Board, Data Board. 8.5"x11" 22 Pc 90.00 1,980.00 44 Clip Board, Data Board. 8.5"x13" 148 Pc 100.00 14,800.00 45 Clip, Bulldog 2" 344 Pc 8.00 2,752.00 46 Clip, Bulldog 3'' 324 Pc 15.00 4,860.00 47 Colored Paper 8 1/2 X 11" 10's/pack 22 Pack 30.00 660.00 48 Colored Paper, A4, Light Blue 37 Ream 200.00 7,400.00 49 Columnar Notebook, 10 Cols 10 Pad 35.00 350.00 50 Columnar Notebook, 12 Cols 18 Pad 35.00 630.00 51 Construction Paper (assorted) 10 Sheets Per Pack 40 Pack 30.00 1,200.00 52 Corkboard, 2x3 Ft 2 Pc 900.00 1,800.00 53 Corkboard, 3ft X 4 Ft 1 Pc 2,000.00 2,000.00 54 Correction Pen 70 Pc 20.00 1,400.00 55 Correction Tape 5mm X 8m 562 Pc 30.00 16,860.00 56 Cotton (500 Grams) 1 Roll 150.00 150.00 57 Crayons, 8 Colors 12 Pack 20.00 240.00 58 Cutter Blade, Big 12 Box 30.00 360.00 59 Cutter, Heavy Duty 46 Pc 100.00 4,600.00 60 Dating And Stamping Machine, Self Inking (dated 2024 And Up) 42 Pc 500.00 21,000.00 61 Envelope, Ordinary, Long Brown 1525 Pc 4.00 6,100.00 62 Envelope, Ordinary, Short Brown 243 Pc 3.00 729.00 63 Eraser (for Pencil) 161 Pc 15.00 2,415.00 64 Expanding Envelope, Kraft, Legal Size 335 Pc 15.00 5,025.00 65 Expanding Envelope, Hard Plastic With Garter (pvc Type), Legal Size 76 Pc 90.00 6,840.00 66 Expanding Envelope, Plastic Long (thick) 230 Pc 35.00 8,050.00 67 Expanding Envelope, Plastic Long With Handle 355 Pc 90.00 31,950.00 68 File Box W/ Cover (blue) 233 Pc 410.00 95,530.00 69 File Box W/ Cover (red) 136 Pc 410.00 55,760.00 70 File Rack, 3 Layers, Heavy Duty 24 Pc 500.00 12,000.00 71 Film Index (with Sign Here Note) 219 Pack 55.00 12,045.00 72 Film Index Rainbow Color 158 Pack 45.00 7,110.00 73 Folder Expanding, Legal Size (green, Glossy) 1574 Pc 18.00 28,332.00 74 Folder Expanding, Short (green, Glossy) 50 Pc 15.00 750.00 75 Folder Long Ordinary, Kraft, Thick 1196 Pc 6.00 7,176.00 76 Folder Long Ordinary, White, Thick 3869 Pc 6.00 23,214.00 77 Folder Plastic Clear W/ Slide (a4) (thick Plastic) 66 Pc 35.00 2,310.00 78 Folder Plastic Clear W/ Slide (legal) (thick Plastic) 178 Pc 40.00 7,120.00 79 Folder, Morocco, Legal (blue) Not Glossy 140 Pc 25.00 3,500.00 80 Folder, Morocco, Legal (green) Not Glossy 92 Pc 25.00 2,300.00 81 Folder, Morocco, Short (blue) Not Glossy 107 Pc 18.00 1,926.00 82 Folder, Morocco, Short (green) Not Glossy 35 Pc 18.00 630.00 83 Glue Gun Heavy Duty Big 8 Pc 360.00 2,880.00 84 Glue Stick, Big 102 Pc 12.00 1,224.00 85 Glue, Multi-purpose 240 Grams 12 Bot 150.00 1,800.00 86 Highlighter, Blue 55 Pc 40.00 2,200.00 87 Highlighter, Green 95 Pc 40.00 3,800.00 88 Highlighter, Orange 83 Pc 40.00 3,320.00 89 Highlighter, Pink 78 Pc 40.00 3,120.00 90 Highlighter, Yellow 91 Pc 40.00 3,640.00 91 I.d. Holder W/ Lace 4"x6" 100 Pc 45.00 4,500.00 92 Illustration Board, 1 Whole 15 Pc 70.00 1,050.00 93 Index Card (3"x5") 50s/pack 24 Pack 45.00 1,080.00 94 Laminating Film A4 Size 100pcs/pack 250 Mic 34 Pack 1,200.00 40,800.00 95 Lead, For Mechanical Pencil 0.5mm 12pc/tube 2 Tube 30.00 60.00 96 Lever Arch File, Blue, File Top, Size: Approx. (11 X 13.5 X 2.5 Inches) 20 Pc 195.00 3,900.00 97 Lever Arch File, Blue, Landscape, Size: Approx. (11 X 13.5 X 2.5 Inches) 40 Pc 195.00 7,800.00 98 Lever Arch File, Blue, Size: Approx. (15.5 X 9.5 X 3 Inches) 45 Pc 195.00 8,775.00 99 Magazine File Box (5"x9"x15-3/4") 60 Pc 110.00 6,600.00 100 Mailing Envelope, White, 500pcs/box 18 B0x 290.00 5,220.00 101 Manila Paper 1 Whole 276 Sheet 5.00 1,380.00 102 Marker Permanent Ink Refill 30ml, Black (pilot) 36 Bot 110.00 3,960.00 103 Marker Permanent Ink Refill 30ml, Blue (pilot) 32 Bot 110.00 3,520.00 104 Notebook (80 Leaves) 1040 Pc 45.00 46,800.00 105 Official Record Book (300 Pages) Aprox. Size: (8.5 X 11) 73 Book 250.00 18,250.00 106 Official Record Book (500 Pages) Aprox. Size: (8.5 X 11) 100 Book 280.00 28,000.00 107 Paper Cutter With Board, Wood Base, 12x15 3 Unit 1,200.00 3,600.00 108 Paper Cutter,steel Base W/ Ruler & Presser 15'x12' 1 Unit 2,000.00 2,000.00 109 Paper Fastener (plastic) 100 Box 40.00 4,000.00 110 Paper Fastener, (metal) 207 Box 70.00 14,490.00 111 Paper, Ruled Pad, 90 Leaves (yellow Pad) 35 Pad 45.00 1,575.00 112 Parchment Paper, Long, 10sheets/pack (cream) 48 Pack 35.00 1,680.00 113 Parchment Paper, Short, 10sheets/pack (cream) 58 Pack 30.00 1,740.00 114 Paste With Applicator, 200 Grams 4 Jar 80.00 320.00 115 Pencil With Eraser No.2 (12pcs/box) 212 Box 72.00 15,264.00 116 Pencil, Mechanical, 0.5mm Lead 56 Pc 47.75 2,674.00 117 Permanent Marker (black) (bullet Type) (super Color Marker) 225 Pc 45.00 10,125.00 118 Permanent Marker (black) (chisel Type) (super Color Marker) 174 Pc 55.00 9,570.00 119 Permanent Marker (blue) (bullet Type) (super Color Marker) 195 Pc 45.00 8,775.00 120 Permanent Marker (blue) (chisel Type) (super Color Marker) 117 Pc 55.00 6,435.00 121 Permanent Marker (red) (bullet Type) (super Color Marker) 57 Pc 45.00 2,565.00 122 Permanent Marker (red) (chisel Type) (super Color Marker) 70 Pc 55.00 3,850.00 123 Philippine National Flag, Size: 90cm X 150cm 12 Pc 102.00 1,224.00 124 Photo Paper, Glossy, A4, 20pcs/pack 67 Pack 150.00 10,050.00 125 Plastic Twine, One Kilo Per Roll 18 Roll 80.00 1,440.00 126 Puncher, Heavy Duty, 2 Holes 12 Unit 200.00 2,400.00 127 Push Pin, Hammer Head Type, Assorted Colors, 100s/box 13 Box 50.00 650.00 128 Ring Binder, 1" 5 Pc 45.00 225.00 129 Ring Binder, 1/2 " 5 Pc 20.00 100.00 130 Rotary Pencil Sharpener 2 Pc 300.00 600.00 131 Rubber Band, Large Size 15 Box 150.00 2,250.00 132 Ruler Metal 12 Inch 9 Pc 50.00 450.00 133 Ruler Plastic 12 Inch 5 Pc 20.00 100.00 134 Scissors Heavy Duty Big 8" (stainless) 63 Pair 120.00 7,560.00 135 Screw Fastener 3" 438 Pc 10.00 4,380.00 136 Screw Fastener 4" 357 Pc 12.00 4,284.00 137 Sign Pen V5, Black 415 Pc 55.00 22,825.00 138 Sign Pen V5, Blue 387 Pc 55.00 21,285.00 139 Sign Pen V5, Green 55 Pc 55.00 3,025.00 140 Sign Pen, 1.0mm, Black 177 Pc 75.00 13,275.00 141 Sign Pen, 1.0mm, Blue 146 Pc 75.00 10,950.00 142 Sign Pen, Black Pentel Gel Type 0.5 539 Pc 95.00 51,205.00 143 Sign Pen, Blue Pentel Gel Type 0.5 400 Pc 95.00 38,000.00 144 Specialty Board, Cream, 8.5x11, 10pcs/pack (b-board) 673 Pack 35.00 23,555.00 145 Specialty Board, Cream, 8.5x13, 10pcs/pack (b-board) 648 Pack 40.00 25,920.00 146 Specialty Board, White, 8.5x11, 10pcs/pack (b-board) 225 Pack 35.00 7,875.00 147 Specialty Board, White, 8.5x13, 10pcs/pack (b-board) 408 Pack 40.00 16,320.00 148 Stamp Pad Ink Black 50ml 13 Pc 45.00 585.00 149 Stamp Pad Ink Red 50ml 4 Pc 45.00 180.00 150 Stamp Pad Ink Violet 50ml 23 Pc 45.00 1,035.00 151 Stamp Pad Standard Size Black 7 Pc 40.00 280.00 152 Stamp Pad Standard Size Violet 4 Pc 40.00 160.00 153 Staple Wire #35 297 Box 40.00 11,880.00 154 Stapler, #35 Heavy Duty With Staple Remover 57 Unit 400.00 22,800.00 155 Stapler, Long Reach Heavy Duty 3 Unit 500.00 1,500.00 156 Sticker Paper (high Gloss, Inkjet Friendly 10sheets/pack) A4size 75 Pack 95.00 7,125.00 157 Sticker Paper (high Gloss, Inkjet Friendly 10sheets/pack), Long 123 Pack 100.00 12,300.00 158 Sticker Paper (high Gloss, Inkjet Friendly 10sheets/pack), Short 55 Pack 90.00 4,950.00 159 Sticky Notes (2"x1.5") 100 Sheets/pad 126 Pad 25.00 3,150.00 160 Sticky Notes (2"x2"), 100 Sheets/pad 141 Pad 30.00 4,230.00 161 Sticky Notes (3"x2"), 100 Sheets/pad 127 Pad 40.00 5,080.00 162 Sticky Notes (3"x3"), 100 Sheets/pad 222 Pad 40.00 8,880.00 163 Sticky Notes (3"x4), 100 Sheets/pad 158 Pad 50.00 7,900.00 164 Sticky Notes (3"x5"), 100 Sheets/pad 215 Pad 50.00 10,750.00 165 Super Glue / Shoe Glue 3 Grams 6 Pc 50.00 300.00 166 Super Permanent Marker, Fine Black (industrial) (sharpie) 35 Pc 90.00 3,150.00 167 Tape Dispenser, Heavy Duty (1") 9 Pc 150.00 1,350.00 168 Tape Double Sided Thin 24mm White 95 Pc 40.00 3,800.00 169 Tape Double Sided Adhesive W/ Foam Green, 2" 94 Roll 230.00 21,620.00 170 Tape Double Sided Adhesive W/ Foam Green, 1" 84 Roll 150.00 12,600.00 171 Tape Duct, Color Blue 2" 62 Roll 110.00 6,820.00 172 Tape Duct, Color Grey 2" 78 Roll 110.00 8,580.00 173 Tape, Masking, 1/2" 47 Roll 21.00 987.00 174 Tape, Masking, 24mm, 1", 100m 95 Roll 35.00 3,325.00 175 Tape, Masking, 48mm, 2", 100m 301 Roll 70.00 21,070.00 176 Tape, Packaging, 48mm, 2", 100m 88 Roll 55.00 4,840.00 177 Tape, Transparent, 24mm, 1", 100m 170 Roll 30.00 5,100.00 178 Tape, Transparent, 48mm, 2", 100m 126 Roll 52.00 6,552.00 179 Tracing Paper, Per Cut, 20x30, 8085 Thick 2 Pc 20.00 40.00 180 Whiteboard, 3ft X 4ft 7 Pc 2,000.00 14,000.00 181 Whiteboard, 5ft X 3ft 6 Pc 2,800.00 16,800.00 182 Air Freshener, 280ml (lemon Fresh) 163 Can 240.00 39,120.00 183 Air Freshener, Scented Gel, 180 Grams 98 Pc 220.00 21,560.00 184 Bathroom Cleaner (approx. 900ml) 29 Bot 300.00 8,700.00 185 Bathroom Soap, 90 Grams 16 Pc 50.00 800.00 186 Bleach Colored 1 Ltr 62 Bot 130.00 8,060.00 187 Bleach White 1 Ltr 63 Bot 100.00 6,300.00 188 Broom, Ceiling, Bamboo 23 Pc 170.00 3,910.00 189 Broom, Soft 5 Pc 170.00 850.00 190 Broom, Stick 14 Pc 40.00 560.00 191 Car Freshener 42 Grams, Organic Canister, Assorted Scent 63 Can 240.00 15,120.00 192 Detergent Bar, Long 12 Bar 80.00 960.00 193 Detergent Powder, W/ Fabric Conditioner 1kg 43 Pack 150.00 6,450.00 194 Dishwashing Liquid (250ml) 402 Bot 70.00 28,140.00 195 Disinfectant Spray, 170g 89 Can 280.00 24,920.00 196 Door Mat, Cloth Rectangle 105 Pc 60.00 6,300.00 197 Dust Pan, Plastic Big 2 Pc 80.00 160.00 198 Fabric Conditioner 800 Ml 14 Bot 250.00 3,500.00 199 Face Towel (cotton), Good Morning 159 Pc 30.00 4,770.00 200 Floor Mop With Bucket (360degrees Rotating Micro Fiber Head) 3 Set 1,500.00 4,500.00 201 Furniture Cleaner, 300ml 32 Can 300.00 9,600.00 202 Garbage Bag, Black, Gusseted Type Thick Plastic, 10's/roll, (small) 55 Roll 70.00 3,850.00 203 Garbage Bag, Black, Thick Plastic, 10's/pack, (large), Heavy Duty 145 Pack 100.00 14,500.00 204 Garbage Bag, Black, Thick Plastic, 10's/pack, (xl) Heavy Duty 37 Pack 130.00 4,810.00 205 Garbage Bag, Black, Thick Plastic, 10's/pack, (xxl) Heavy Duty 239 Pack 150.00 35,850.00 206 Garbage Bag, Black, Thick Platic, 10's/pack, (medium), Heavy Duty 168 Pack 80.00 13,440.00 207 Glass Cleaner, Big Sprayer Type 7 Bot 197.00 1,379.00 208 Glass Squeezer W/ Handle 1 Pc 125.00 125.00 209 Hand Sanitizing Gel, 60ml 15 Bot 60.00 900.00 210 Insecticide Spray (aerosol) 400ml 73 Can 350.00 25,550.00 211 Laundry Brush 4 Pc 30.00 120.00 212 Laundry Gloves (medium) 1 Pc 200.00 200.00 213 Liquid Handwash (antibacterial) 400ml 123 Bot 140.00 17,220.00 214 Microfiber, Cleaning Cloth 35cm X 35cm 47 Pc 60.00 2,820.00 215 Mop W/ Squeezer (squeez Mop) 26 Pc 350.00 9,100.00 216 Pail W/ Cover (16l) 18 Pc 200.00 3,600.00 217 Paper Towel, Interfold 144 Pack 120.00 17,280.00 218 Push Brush (floor Brush) 20 Pc 130.00 2,600.00 219 Scrub Sponge, Heavy Duty 116 Pc 60.00 6,960.00 220 Scrubbing Pads, Heavy Duty 25 Pc 40.00 1,000.00 221 Table Napkin, Pre Folded 13 Pack 100.00 1,300.00 222 Tissue Paper, 2-ply, 12 Rolls/pack 422 Pack 180.00 75,960.00 223 Tissue Paper, 3-ply, @ 4rolls/pack 213 Pack 160.00 34,080.00 224 Toilet Bowl Brush W/ Box 57 Pc 92.00 5,244.00 225 Toilet Bowl Pump 2 Pc 60.00 120.00 226 Toilet Deodorant Cake, 50 Grams 108 Pc 50.00 5,400.00 227 Trash Bin, Plastic W/ Cover, 11l Capacity 6 Pc 150.00 900.00 228 Trash Bin, Plastic W/ Cover, 25l Capacity 1 Pc 250.00 250.00 229 White Facial Tissue (200mmx200mm)2ply 210 Box 110.00 23,100.00 230 Cd Rewritable, 700mb 80min. W/ Case 603 Pc 50.00 30,150.00 231 Dvd-rewritable W/ Case 6 Pc 90.00 540.00 232 External Hard Drive (1 Tb) Usb 3.0 27 Unit 4,700.00 126,900.00 233 External Hard Drive, Ssd (1 Tb) Usb 3.0/type C 15 Unit 6,000.00 90,000.00 234 Flash Drive , Usb 16gb, Plug In Play 3 Pc 490.00 1,470.00 235 Flash Drive, 32gb Ultra Usb Driver (otg); Micro-usb & Usb Connectors 42 Pc 1,300.00 54,600.00 236 Flash Drive, Usb 32 Gb 31 Pc 1,000.00 31,000.00 237 Flash Drive, Usb 64 Gb 119 Pc 1,500.00 178,500.00 238 Hdmi Cable, 10m 5 Pc 600.00 3,000.00 239 Hdmi Cable, 5m 3 Pc 300.00 900.00 240 Keyboard, Usb Type 36 Pc 450.00 16,200.00 241 Keyboard, Wireless 5 Pc 600.00 3,000.00 242 Microsd Memory Card, 32gb 1 Pc 1,000.00 1,000.00 243 Microsd Memory Card, 64gb 2 Pc 1,800.00 3,600.00 244 Mouse Optical, (usb) 15 Pc 300.00 4,500.00 245 Mouse For Laptop, Optical 50 Pc 440.00 22,000.00 246 Mouse Optical, Wireless 21 Pc 630.00 13,230.00 247 Mouse Pad 119 Pc 30.00 3,570.00 248 Powerbank 10000mah 5 Pc 1,500.00 7,500.00 249 Powerbank 20000mah 50 Pc 2,500.00 125,000.00 250 Uninterruptible Power Supply (ups), 500va - 600va 12 Pc 4,500.00 54,000.00 251 Usb Hub, 3.0, 4 Port 5 Pc 500.00 2,500.00 252 Usb Lan Wireless Adapter 8 Unit 1,000.00 8,000.00 253 Wireless Usb Presenter 2 Unit 2,200.00 4,400.00 254 Ink Brother, Bt5000m, Magenta 36 Bottle 490.00 17,640.00 255 Ink Brother, Bt5000m, Yellow 36 Bottle 490.00 17,640.00 256 Ink Brother, Bt5000m, Cyan 41 Bottle 490.00 20,090.00 257 Ink Brother, Bt6000m, Black 30 Bottle 490.00 14,700.00 258 Ink Cartridge, Canon Cl-36, Colored (for Canon Mobile Printer) 13 Cart 1,600.00 20,800.00 259 Ink Cartridge, Canon Cl-811 Colored 3 Cart 2,000.00 6,000.00 260 Ink Cartridge, Canon Pg-35, Black (for Canon Mobile Printer) 10 Cart 1,100.00 11,000.00 261 Ink Cartridge, Canon Pg-810 (canon) 3 Cart 1,900.00 5,700.00 262 Ink Cartridge, Hp62, Black (hp Office Jet 200 Mobile Printer) 5 Cart 1,500.00 7,500.00 263 Ink Cartridge, Hp62, Tricolor (hp Office Jet 200 Mobile Printer) 5 Cart 1,800.00 9,000.00 264 Ink, Hp Gt 51 Black 2 Bottle 400.00 800.00 265 Ink, Hp Gt 52 Cyan 2 Bottle 400.00 800.00 266 Ink, Hp Gt 52 Magenta 2 Bottle 400.00 800.00 267 Ink, Hp Gt 52 Yellow 2 Bottle 400.00 800.00 268 Ink Epson T6731 Black (epson) 6 Bottle 800.00 4,800.00 269 Ink Epson T6732 Cyan (epson) 6 Bottle 800.00 4,800.00 270 Ink Epson T6733 Magenta (epson) 6 Bottle 800.00 4,800.00 271 Ink Epson T6734 Yellow (epson) 6 Bottle 800.00 4,800.00 272 Ink Epson T6735, Light Cyan (epson) 3 Bottle 800.00 2,400.00 273 Ink Epson T6736, Light Magenta (epson) 3 Bottle 800.00 2,400.00 274 Ink Epson, T6641, Black 70ml 22 Bottle 450.00 9,900.00 275 Ink Epson, T6642, Cyan 70ml 9 Bottle 450.00 4,050.00 276 Ink Epson, T6643, Magenta 70ml 13 Bottle 450.00 5,850.00 277 Ink Epson, T6644, Yellow 70ml 14 Bottle 450.00 6,300.00 278 Ink Epson, 001, Black 179 Bottle 700.00 125,300.00 279 Ink Epson, 001, Cyan 138 Bottle 600.00 82,800.00 280 Ink Epson, 001, Magenta 138 Bottle 600.00 82,800.00 281 Ink Epson, 001, Yellow 137 Bottle 600.00 82,200.00 282 Ink Epson, 003, Black 679 Bottle 500.00 339,500.00 283 Ink Epson, 003, Cyan 465 Bottle 500.00 232500 284 Ink Epson, 003, Magenta 483 Bottle 500.00 241,500.00 285 Ink Epson, 003, Yellow 451 Bottle 500.00 225500 286 Ink Epson, 008, Black 37 Bottle 1,200.00 44,400.00 287 Ink Epson, 008, Cyan 28 Bottle 900.00 25,200.00 288 Ink Epson, 008, Magenta 29 Bottle 900.00 26,100.00 289 Ink Epson, 008, Yellow 29 Bottle 900.00 26,100.00 290 Toner Cartridge, Fuji Xerox S1810/s2010/s2220/s2420 (ct201911) 3 Cart 5,400.00 16,200.00 291 Toner Cartridge, Fuji Xerox S2011/s2320/s2520 (ct202384) 1 Cart 5,400.00 5,400.00 292 Toner Cartridge, Hp Laserjet P1102, Ce285a (85a) 25 Cart 5,000.00 125,000.00 293 Toner Cartridge, Kyocera (tk 1175) Monochrome 4 Cart 9,500.00 38,000.00 294 Toner Cartridge, Sharp Ar-6026n (mx-238ft) 5 Cart 9,500.00 47,500.00 295 Toner Cartridge, Lexmark (mx321) 2 Cart 10,000.00 20,000.00 296 Hp Color Laserjet Toner 206a, Black 7 Cart 9,500.00 66,500.00 297 Hp Color Laserjet Toner 206a, Cyan 1 Cart 9,500.00 9,500.00 298 Hp Color Laserjet Toner 206a, Magenta 1 Cart 9,500.00 9,500.00 299 Hp Color Laserjet Toner 206a, Yellow 1 Cart 9,500.00 9,500.00 300 Ink Brother Btd60bk 8 Bottle 510.00 4,080.00 301 Certificate Holder, Legal Size W/ Plastic Cover 400 Pc 60.00 24,000.00 302 Specialty Board, Cream, A4 8.2x11.7, 10pcs/pack (b-board) 300 Pack 30.00 9,000.00 303 Specialty Board, White, A4 8.2x11.7, 10pcs/pack (b-board) 105 Pack 30.00 3,150.00 304 Ink Cartridge, Hp 682, Black 3 Cart 550.00 1,650.00 305 Ink Cartridge, Hp 682, Tri-color 3 Cart 550.00 1,650.00 306 Index Card (5"x8") 50s/pack 3 Pack 65.00 195.00 307 Screw Fastener 1" 200 Pc 7.00 1,400.00 308 Screw Fastener 2" 198 Pc 8.00 1,584.00 309 Plastic Fastener (5 Pcs/pack) Double Lock 220 Pack 25.00 5,500.00 310 Notebook, A6 Size, 200 Pages 115 Pc 60.00 6,900.00 311 Notebook, A7 Size, 200 Pages 100 Pc 50.00 5,000.00 312 Usb 3.1 Otg Flashdrive, Type C, 128 Gb 51 Pc 3,000.00 153,000.00 313 Notebook, A5 Size, Soft Leather Cover, 200 Sheets 80 Pc 200.00 16,000.00 314 Gel Ink Sign Pen, 0.4 100 Pc 90.00 9,000.00 315 Gel Ink Sign Pen, 0.3 100 Pc 90.00 9,000.00 316 Toner Cartridge, Fujifilm Apeos 2150 Nda 5 Cart 3,500.00 17,500.00 317 Whiteboard 2ft X 2 Ft 2 Piece 2,000.00 4,000.00 318 Clamp - Stapler Remover 5 Pcs 30.00 150.00 319 Portable Bluetooth/wireless Speaker With Trolley (free Microphone) 1 Unit 6,695.00 6,695.00 320 Dishwashing Liquid Diy Kit, Lemon Scent (for 15-16 Liters Output) 25 Set 400.00 10,000.00 321 Fabric Conditioner Diy Kit, Sunrise Fresh Scent (for 20 Liters Output) 25 Set 450.00 11,250.00 322 Liquid Handsoap Diy Kit, Antibac Scent (for 15-16 Liters Output) 25 Set 400.00 10,000.00 323 Sack For 50kls Capacity (size: 64cm X 104cm) 76 Pc 15.00 1,140.00 324 Printer Ribbon, Epson Lq 310 2 Cart 250.00 500.00 325 Stackable Storage Box With Cover And Wheels (155l) 3 Pcs 1,100.00 3,300.00 Total 6,294,122.50 Delivery Schedule: Delivery Schedule: Sixty (60) Working Days From Receipt Of Ntp Drop-off Point: Da-rfo 1, City Of San Fernando, La Union Delivery Of The Goods Is Required Within Sixty (60) Working Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm, Monday To Friday. Department Of Agriculture Regional Field Office 1 Aguila Rd., Sevilla, City Of San Fernando, La Union 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From January 7-27, 2025 From The Address Given And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php10,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Da-rfo 1 Will Hold A Pre-bid Conference On 14 January 2025, 3:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Above On Or Before 27 January 2025, 3:00 Pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 27 January 2025, 3:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union. Bids Will Be Opened In The Presence Of The Bidders Or Their Authorized Representatives. 10. Additional Instructions To Bidders: A. The Bidders Or Their Duly Authorized Representatives May Attend The Bid Opening; B. In Case A Representative Will Be Attending The Bid Opening, A Special Power Of Attorney (spa), Secretary’s Certificate, Board Resolution Or Any Other Forms Of Authorization (notarized), As The Case May Be, Together With The Company-issued Identification Card Or Any Valid Id Must Be Presented Upon Submission Of The Bid Proposal At The Bac Secretariat. The Name/title Of The Project Must Be Indicated In The Authorization Or Spa. C. Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. Bidders Shall Submit Their Bids With Proper Index Tabbing Using The Forms Specified In The Bidding Documents In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously; The First Component Which Is The Technical Eligibility Requirements Must Be Soft-bound, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Second Component Being The Financial Eligibility Requirements Can Be Fastened In A Folder, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Technical And Financial Requirement Each In Separate Envelopes, Shall Be Enclosed In A Mother Envelope With The Same Sealing And Markings. Non-compliance With Index Tabbings Shall Not Be A Ground For Outright Disqualification Or Declaration Of Ineligibility. The Improper Index Tabbings Must Be Duly Acknowledged By The Bidder/representative And Be Subject To The Bid Evaluation And Post-qualification Of The Technical Working Group (twg) As To Their Substance. D. All Documents In The Financial Requirements Envelope Must Be Duly Signed And/or Initialed By The Bidder/authorized Representative On Each And Every Page Thereof. 11. The Da-rfo 1 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And Section 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Dennis I. Tactac, Abe Chairperson, Bids And Awards Committee Department Of Agriculture - Regional Field Office 1 Aguila Road, Sevilla, City Of San Fernando, La Union Tel. No. :(072) 242/1045-46, Ext. 07 E-mail Add: Bacsec@ilocos.da.gov.ph 13. For Downloading Of Bidding Documents, You May Visit The Following Websites: Da-rfo 1 Website: Https://ilocos.da.gov.ph/ Philgeps Website: Https://www.philgeps.gov.ph/ January 6, 2025 Approved: (sgd.) Gilbert D. Rabara, Dvm Vice-chairperson, Bids And Awards Committee Invitation To Bid Identification No. Da-rfo 1-2025-goods-033