Ups Tenders

Details: Deadline for submitting a file: three reviews per year, in April, September and December until closing on December 15, 2026. Entrepreneur profile: SMEs and ETIs with plans to establish pilot and/or production sites Industrial, intended to market innovative products and the pooling of pre-industrial capacities for the benefit of start-ups. Candidate projects must present a total expenditure base of an amount greater than 5 million euros. Grant: The assistance will be provided in the form of grants and recoverable advances, distributed according to a ratio of 60% grants and 40% recoverable advances. > More information and application.

Details: Description Republic Of The Philippines Department Of Health Caraga Regional Hospital Surigao City Ooooooooo @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Bids And Awards Committee Invitation To Bid Ib No. 2024-02-11 (125) Supply And Delivery Of One (1) Unit 14-l Low Temperature Plasma Sterilizer Approved Budget For The Contract: Php 2,500,000.00 ========================================================= 1. The Caraga Regional Hospital (crh), Through The Fy2024 Internally Generated Fund (igf) Intends To Apply The Sum Of Being The Approved Budget For The Contract (abc) Of Two Million Five Hundred Thousand Pesos Only ( Php 2,500,000.00 ) As To Payment Under The Contract For Supply And Delivery Of One (1) Unit 14-l Low Temperature Plasma Sterilizer. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening And Items Below Are Subject For A Competitive Bidding As Framework Agreement List. Item No. Description Qty Unit Of Measure Unit Cost Total Cost 1 14-l Low Temperature Plasma Sterilizer 1 Unit 2,500,000.00 2,500,000.00 Technical Specification And Terms Of Reference Inclusions: • Cart (1 Piece) • Sealer (1 Piece) • Filter Replacement Kit (5 Kits) • Consumables Good For 1 Year • Tyvek Roll (2 Rolls) • Sterload Sterilant Cassette (4 Boxes) • Ups (1 Unit) • Auto Clave Machine 20 Liter (1 Unit) Specifications: Size: 433 X 614 X 437 (w X D X H, Unit: Mm) Chamber: 264 X 410 X 125 (w X D X H, Unit: Mm) Diagonal Length (chamber): 47 Cm Vacuum Pump: Pump Built-in Type Capacity: 14 Liter Weight: 67 Kg Input: 100-120 / 220-240 Vac, 50/60 Hz Power: 1kva Class: Class Llb (rule 15, Annex Ix Of Mmd 93/42/eec) Temperature: 50-60 °c Cycle Time: 7 Minutes 14 Minutes 36 Minutes Preventive Maintenance: 4 Years On Preventive Maintenance (annual) Delivery: 30 Calendar Days From Receipt Of The Notice To Proceed Terms Of Payment: Payment Shall Be Made Upon Complete Delivery. Necessary Documents Are Required In Compliance With Auditing Rules And Regulations. Post-qualification: The Bidder Shall Comply The Post-qualifications Requirements Set By The Procuring Entity Specially During Product Demonstration On A Given Schedule. Failure To Comply Shall Be Ground From Post-disqualification. The Procuring Entity Shall Require The Bidder To A Product Demo At Caraga Regional Hospital Vicinity. Additionally, The Procuring Entity May Have Preferences Regarding How This Hospital Can Find Reliable And Easily Accessible Procedures During The Post-qualification Phase. Consequently, During This Phase, The Bidder Must Always Be Ready To Comply With Any Requirements Or Standards Made By The Procuring Entity. Warranty: 5 Years Minimum Warranty For Parts And Service. Technical Specification And Terms Of Reference Are Hereby Posted In Philgeps And Form An Integral Part Of This Invitation To Bid. 2. The Crh Now Invites Bids For The Procurement Of The Above-captioned Project. Delivery Of The Goods Is Required Within The Period Specified Under Section Vi (schedule Of Requirements). Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. Section 23.4.1.3.(ra 9184). The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. Slcc Must Be Within 2 Years From The Submission Of Bids. (based On The Completion Date). The Single Largest Completed Contract (slcc) Shall Be The Same Or Similar In Nature, As Determined And Defined By The Bids And Awards Committee ( Bac ). For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: A. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And B. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Nondiscretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee (bac) Secretariat, Caraga Regional Hospital, Surigao City And Inspect The Bidding Documents At The Address Given Above During 8:00 Am – 5:00 Pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 28, 2024 To February 11, 2025 On Or Before 10:00 A.m. From The Address Above And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Specified Below: Bidding Schedule Pre-bidding Conference January 21, 2025 At 9:00 A.m. Via Zoom Platform Link: Join Zoom Meeting Https://us06web.zoom.us/j/83382945759?pwd=vahlitmo89wmkxot0ntur4kht0ngf8.1 Meeting Id: 833 8294 5759 Passcode: 561013 Deadline Of Submission Of Bids February 11, 2025 At 10:00 A.m... Via Online And Submit Your Bidding Documents To This Email Address: Crhbac2020@gmail.com. Please Be Advised That Failure To Submit Bidding Documents To The Designated Official Email Address Will Result In Automatic Rejection And Disqualification. Opening Of Bids February 11, 2025 At 2:00 P.m. Via Zoom Platform Link: Join Zoom Meeting Https://us06web.zoom.us/j/83797983054?pwd=uapq8doiekuo2hac7obmfbspznw1gw.1 Meeting Id: 837 9798 3054 Passcode: 753299 Complete Philippine Bidding Documents Please Click The Link Below For The Complete Pbd: Https://drive.google.com/drive/folders/19holpnwwnhvgwfbs263_cgg3upev4wrv?usp=sharing Bidding Documents Php 5,000.00 It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Following Phlippine Bidding Documents Can Be Accessed In The Philgeps And All Form And Part Of This Invitation To Bid, To Wit: A. Technical Specification / Terms Of Reference/ List Of Items B. Instruction To Bidders: B.1. Documents To Be Submitted (checklist- This Will Be Discussed During The Pre-bid Conference) B.2. Memorandum Of Undertaking – Provision Thereof Is Strictly Implemented C. Guidelines On The Conduct Of The Electronic Submission And Receipt Of Bids By The Procuring Entity – Caraga Regional Hospital (crh) D. Philippine Bidding Documents 6. The Crh Will Hold A Pre-bid Conference On The Above-mentioned Date, Time And Venue, Which Shall Be Opened To Prospective Bidders. The Pre-bidding Conference And Opening Of Bids Shall Be Conducted Through Videoconferencing, Webinar Or Virtual. Please Send Your Intent To Participate To Our Email Address As Provided Below. 7. Bids Must Be Duly Received By The Bac Secretariat At Via Designated Email On Or Before February 11, 2025 At 10:00 O’clock In The Morning. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On February 11, 2025 At 2:00 O’clock In The Afternoon At The Bac Conference Room, Beside Procurement Office, Caraga Regional Hospital, Rizal Street, Surigao City As Virtual / Electronic Bidding Via Zoom Platform. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above. Late Bids Shall Not Be Accepted Under Any Circumstances May It Cause. 8. Furthermore, The Standard Philippine Bidding Document (pbd) Is Form And Part Of This Invitation In Accordance To Ra 9184 And Other Applicable Laws, Rules And Policy. 9. The Crh Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. The Opening And Receipt Of Bids Is Strictly Implemented Through Electronic Submission. Given The Covid-19 Pandemic, Procurement Activity Has Been Expedient And One Of This Is The Conduct Of Electronic Submission Of Bids. The Crh Thru The Bids And Awards Committee (bac) Has Submitted Certification, Certified By The Highest Official Managing The Information Technology, Describing The Electronic System Or Procedure To Be Used By The Crh For The Electronic Submission And Receipts Of Bids And A Statement That The Same Is Compliant With The Gppb Resolution No. 12-2020 Requirements. 11. Bidding Documents Shall Be Emailed To This Email Address, With Activated Password To: Crhbac2020@gmail.com. You May Deposit On Line For The Payment Of The Bidding Documents To This Account Below: Bank Name: Land Bank Of The Philippines Account Name: Caraga Regional Hospital-trust Fund Account Number: 0982 -1288 – 70 12. Furthermore Deposit Slip Shall Be Submitted Via Email To: Crhprocurement.bac@gmail.com 13. The Procuring Entity Will No Longer Accept Nor Entertain Any Form Of Bids Submission Except Electronic. Failure To Comply Electronic Submission Will Be Immediately Disqualified. Guideline On The Electronic Submission Is Hereby Attached. 14. Join The Caraga Regional Hospital Supplier Network By Filling Out The Registry Form From This Link : Https://bit.ly/crh_suppliersregistry 15. For Further Information, Please Inquire To: Bac Secretariat Caraga Regional Hospital. Rizal Street, Surigao City Tel. Nos. (086) 826-1575 Local 194 (086) 826-9058 Mobile Nos: Globe: 0953-9212-832 / Smart: 0985-0508-783 E-mail Address: Crhprocurement.bac@gmail.com Fb Page: Caraga Regional Hospital – Bids And Awards Committee Approved By: (sgd) Fermarie C. Dulpina, Rmt, Mpa, Jd Chief Health Program Officer Chairman, Bids And Awards Committee

Details: The Medical Readiness Contracting Office West (mrco) Is Issuing This Sources Sought Notice To Find Potential Sources To Provide A Cost-per-test (cpt) Agreement Or Reagent Rental Agreement To Include Reagents, Molecular Pcr Instrument/equipment, Consumables, Maintenance Support And Instrument Warranties To Conduct Molecular Genetic And Infectious Disease Testing For The Brooke Army Medical Center (bamc) Department Of Pathology And Area Laboratory Services – Molecular Laboratory, Fort Sam Houston, Texas. A Base Period Of Performance From 01 October 2025 Through 30 September 2030 Will Be Required For This Action. this Is Not A Solicitation Announcement – This Is A Sources Sought Notice And Is Issued Solely For Information And Planning Purposes – It Does Not Constitute A Request For Quote (rfq) Or A Promise To Issue An Rfq In The Future. Solicitations Are Not Available At This Time And Requests For A Solicitation Will Not Receive A Response. This Notice Does Not Constitute A Commitment By The United States Government To Contract For Any Supply Or Service Whatsoever. All Information Submitted In Response To This Announcement Is Voluntary; The United States Government Will Not Pay For Information Requested Nor Will It Compensate Any Respondent For Any Cost Incurred In Developing Information Provided To The United States Government. Not Responding To This Sources Sought Notice Does Not Preclude Participation In Any Future Rfq, Should One Be Issued. It Is The Responsibility Of The Potential Offerors To Monitor This Site For Additional Information Pertaining To This Requirement. the Government Will Use Responses To This Notice In Formulating Its Acquisition Strategy. If The Government Does Not Receive Sufficient Information In Response To This Notice To Verify The Potential For Competition Exists, It Is Possible That A Sole-source Contract, Supported By A Justification And Approval Document, Will Be Issued To Support The Government's Requirement. Mrco-w Is Seeking The Following Information (please Answer Paragraph Below With Your Response): company Name, Cage Code, And Point Of Contact Information (including Phone Number And Email Address), And Socio-economic Category(ies) As Related To Naics 325413 (in-vitro Diagnostic Substance Manufacturing), Such As 8(a), Hubzone, Women-owned, Service-disabled Veteran-owned, Small, Or Other-than-small. capability Statement (limited To Ten Pages), Describing How Your Company Meets The Below Objectives, Providing Additional Proof (such As Fda Approval) Where Appropriate: our Customer, The Department Of Pathology, Molecular Laboratory At Bamc Requires The Following Instrument/equipment, Reagents, Supplies, And Service: requirements Of Services To Be Provided: basic Requirements: Molecular Pcr Testing Equipment, Reagents, Consumables, Maintenance Support And instrument Warranties Used In Support Of Detection Of The Test Menu Below. The System(s) Must Fit As A Table-top Accessed Set And Cannot Be “stand Alone”. test Menu And Special Requirements For Awarded Contractor: Listed Testing Requirements Must Be Capable Of Completion In Under 4.5 Hours From Start Time. Proposal Should Include Automated Molecular Processing For: hla-dq2/hla Dq8 (gluten-sensitive Enteropathy/celiac Disease) all Relevant Alleles apolipoprotein E (apoe/alzheimer’s Disease) gene Variants 2, 3, And 4 haemochromatosis (hfe Gene) h63d, C282y, S65c, And E168x *dermatomycoses Testing Must Be Performed As A Panel To Include Testing For At Least 80% Of The Following Dermatophytes, Yeasts, And Molds: trichophyton Equinum trichophyton Tonsurans trichophyton Interdigitale trichophyton Mentagrophytes t. Interdigitale /mentagrophytes trichophyton Quinckeanum trichophyton Schoenleinii trichophyton Simii t. Quinckeanum /schoenleinii /simii trichophyton Benhamiae (white Fr.) trichophyton Benhamiae (yellow) t. Bullosum /benhamiae (afr.) t. Concentricum /erinaceid trichophyton Erinaceid t. Verrucosum /eriotrephon trichophyton Rubrum trichophyton Violaceum epidermophyton Floccosum nannizzia Fulva nannizzia Gypsea nannizzia Incurvate nannizzia Persicolor microsporum Canis microsporum Ferrugineum microsporum Audouinii m. Canis /audouinii candida Parapsilosis candida Guilliermondii candida Albicans fusarium Solani fusarium Oxysporum scopulariopsis Brevicaulis method Performance/comparison Shall Be At The Expense Of The Vendor, Shall Include Linearity Material And Reagents, And Be Consistent With Current Clsi Standards And Related Documents, Cap Standards And Federal Regulations, For The Following: correlation Studies For Each Analyte. A Minimum Of 20 Samples, Spanning The Reportable Range, Shall Be Run By The Present And The New Contracted Method. Vendor Shall Analyze Numbers And Provide Statistical Data To Accept The New Method. Statistics Shall Consist Of At Least Mean, Bias, Slope, Y-intercept, Correlation Coefficient, And Meet Current Standards Defined By Clsi. linearity Analysis Shall Be Performed On New Contracted Instrument(s) For Each Analyte To Determine Reportable Range With Data Reduction In Accordance With Clsi Guidelines. precision Study Shall Be Performed Utilizing Normal And Abnormal Control Material. This Should Consist Of A Within Run Precision Study Of 10 Normal And 10 Abnormal Controls And A Day-to-day Precision Study Of Normal And Abnormal Controls. sensitivity: Sensitivity May Be Validated Concurrently With The Linearity Verifications. specificity Studies: Adverse Effects For Increased Bilirubin, Hemolysis, Lipemia, Or Other Interrupting Substances Including Blood Container Are Evaluated For Interfering Substances For Each Method Performed. reference Range: Determine A Reference Range For Each Test Following Clsi Guideline C-23a. Samples Used For The Reference Range Study Must Be Representative Of The Patient Population Being Tested. Reference Range Assessment Must Be Performed For Each Lab. One Of The Following Protocols Should Be Used: if The Suggested Manufacturer's Range Is Not Appropriate For The Patient Population, A Reference Range Must Be Established And May Require Additional Reference Individuals. if A Laboratory Is Currently Using The Proposed Instrument/reagent System, The "in-use" Reference Range Can Be Transferred To The "new" System If A Method Comparison Study Between The Two Systems Proves To Be Acceptable. If Comparison Studies Are Not Acceptable, Then An Alternate Test Must Be Provided. analytical Measurement Range Validation Studies Must Be Performed By Vendor For Applicable Analytes, all Technical Procedures Must Be Provided Electronically By Vendor In Clsi Format, Using Software Compatible With Each Laboratory's Computer System, For Local Modification (editable) To Meet Cap Requirements. carryover Studies Must Be Performed, As Applicable, As Part Of The Initial Evaluation Of The Instrument. Vendor Shall Provide Interpretation Of Raw Data For Each Instrument Installed And Validate No Carryover Exists Within The Test Platforms. vendor Must Provide All Reagents, Calibrators, And Controls Needed Along With Technical Assistance To Perform Correlation Studies From A Single Lot At No Additional Cost For New Test Methods Or Changes In Test Menus. (i.e., Vendor Is To Provide All Manpower And Reagents/supplies To Do Correlation Studies). vendor Must Provide Hands-on Training To Staff Onsite Prior To Or During Instrument Integration At The Facility. Expert/advanced User Training Should Be Offered At Vendor/manufacturer Site At A Minimum Of Two (2) Staff Per Instrument. analytical Systems: ability To Manage Testing Workflow Of Hospital Laboratory. Instruments Must Be Able To Perform Testing For All Described Testing Requirements Simultaneously. analyzer(s) Must Be Capable Of Completing Hybridization In One Hour Or Less And Resulting A Sample In Under 4.5 Hours (from Time Of Dna Isolation). integrated Modules (if Applicable) Must Only Require One System Control Center (computer And Screen) To Simplify Operations. instruments Must Have Load On The Fly Capabilities For Reagents, Samples, Bulk Solutions, And Consumables. Quantity Of Consumables And Reagents Must Be Monitored By The System Software. analyzers Must Either Utilize Disposable Pipette Tips Or Demonstrate Clinically Insignificant Carryover. vendor Must Have Commonality Across All Analyzer Platforms For The Following: software reagents consumables methodology analyzers Must Feature Error-proof Reagent And Commodity Design With Built In Safeguards To Prevent Reagent Mix-ups, Probe Crashes And Unnecessary Downtime. calibration Of Analyzer(s) Must Be Easy And Of Minimal Frequency. Calibrations Must Only Be Required When Qc Is Out Of Range Or New Lot Numbers Of Reagent Are Put Into Use. Calibrators Should Be Liquid And Ready To Use With No Reconstitution Or Prep Required Prior To Use. List Any Calibrators That Require Preparation And The Required Process. analyzers Must Be Capable Of Determining The Quality Of The Sample, And Be Able To Detect Clots, Low Or Insufficient Volumes, Aspiration Issues Such As Bubbles, And Other Applicable Liquid Level Sensing Capabilities. Please Describe How Analyzer Detects. quality Control Frequency Not To Exceed Once/24 Hours/instrument Platform. chosen Analyzer(s) Must Have Minimal Daily, Weekly, And Monthly Maintenance Downtime. Please Provide Total Maintenance Times, Including Washes And Wait Time, For Daily, Weekly, And Monthly Maintenance. Please Include Any Hands On, Automated Non-maintenance Activities. vendor To Provide Average Number Of Service Calls Per Year Per Analyzer, Provide Access To A 24/7 On-call Support System, And Perform Preventive Maintenance As Required. analyzer Must Accommodate Multiple Tube Sizes/vial Sizes Simultaneously. vendor Must Provide Btu Output For Both Analytics And Automation Systems. meet Space Limitations. Selected Design Must Maintain Walkways And Clearances Around Track And Instruments. lis Connectivity Must Be Supported/available And Should Have Approved Use For Windows 10 Or Greater (more Recent). reagents And Supplies: vendor Must Describe Kit Size Options Available For Applicable Tests. vendor Reagents Should Be 99% Liquid Ready To Use From Storage, Requiring No Reconstitution Or Mixing. List All Reagents That Are Not Liquid, Ready To Use For Consideration. vendor Calibrators Must Be At Least 95% Liquid Ready To Use From Storage, Requiring No Reconstitution Or Mixing. List All Assay Calibrators That Are Not Liquid, Ready To Use For Consideration. quality Of Reagents, Supplies And Disposables: The Contractor Shall Assure That All Supplies Provided/ordered For Use On Their Equipment Will Be Of The Quality Necessary To Produce A Quality Product. The Reagent Quality Must Be High Enough To Satisfy Proficiency Testing Standards Of The College Of American Pathologists (cap) And The Joint Commission. In The Event That Supplies Are Found To Be Defective And Unsuitable For Use With The Contractor's Equipment Or The Contractor Has Failed To Comply With The Requirements Herein, The Contractor Is Required To Deliver The Supplies Within 24 Hours Of Receipt Of The Verbal Order. vendor Must Provide 5 Years Of Fda Field Action Notifications.

Details: Description Invitation To Bid For The Supply, Delivery, Subscription, Installation, And Configuration Of Various Ict Equipment And Network Softwares 1. The Department Of Agriculture - Regional Field Office 1 (da-rfo 1), Through The Gaa Fy 2025 Intends To Apply The Sum Of Sixteen Million Four Hundred Thirty-two Thousand Pesos (php16,432,000.00) With Project Identification Number Da-rfo 1-2025-goods-032 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Each Lot, To Wit: Project Title Abc (php) Lot 1: Supply And Delivery Of Various Ict Equipment 7,912,000.00 Lot 2: Supply, Delivery And Subscription Of Various Ict Software 2,900,000.00 Lot 3: Supply, Delivery, Installation And Configuration Of Various Ict Network Equipment 4,620,000.00 Lot 4: Supply, Delivery, Installation And Configuration Of 100-port Data And Voice Structured Cabling With Fiber Optic Cable Backbones 1,000,000.00 Total 16,432,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening. 2. The Da-rfo 1 Now Invites Bids For The Above-mentioned Procurement Project With The Following Details And Minimum Specifications, To Wit: Lot No. Particulars/descriptions Quantity Unit Cost Total Cost 1 Supply And Delivery Of Ict Equipment For Office Productivity Of Da-rfo 1 Employees 1 Lot 7,912,000.00 7,912,000.00 1) Laptop (high End, Branded) Processor: 13th Gen, 10 Cores, 16 Threads, 24mb Smart Cache, Up To 4.90 Ghz Max Turbo Frequency, 45w Base Power, Maximum Turbopower 105w Display: 15.6inch Fhd (1920x1080), 144hz, Ips-level Memory: 16gb Ddr5-5200 Max 64gb 2 Slots Storage: 1tb M.2 Ssd Slot (nvme Pcie Gen4) Graphics: 4608 Cuda Cores With Boost Clock 1230 - 2175 Mhz, 8gb Gddr6 Webcam: Hd Type (30fps@720p) Communication: Gb Lan 802.11 Ax Wi-fi 6 + Bluetooth V5.2 1x Type-c (usb3.2 Gen1 / Dp) 2x Type-a Usb3.2 Gen1 1x Type-a Usb2.0 Battery: 3-cell 53.5 Battery (whr) Ac Adapter: 200w Adapter Operating System: Licensed Windows 11 4 Units 2) Desktop Computer (high End, Branded) Lga1700 14th Generation Processor Family 20 Mb L3 Cache, 10 Cores, 16 Threads 16gb Ddr4 3200 512gb Nvme Gen 4 Ssd + 1tb Hdd 7200rpm Dedicated 6gb Ddr6 Graphics Card With Wi-fi And Bluetooth With Wireless Keyboard And Mouse Combo With 23.8 Inches Monitor Native 1920 X 1080 With Licensed Windows 11 Os Installed 10 Units 3) Laptop (regular, Branded) 13th Generation Mobile Processor 16gb 4800mhz Ddr5 512 Gb Nvme Ssd 15.6" Full Hd Wireless Ieee 802.11 A/b/g/n+ac+ax Capable 2x Usb Gen 3.2 Ports 1x Usb 3.2 Type C Port Built-in Webcam And Microphone Rechargeable Built-in Li-ion Battery With Licensed Windows 11 Os Installed 19 Units 4) Desktop Computer (regular, Branded) Lga1700 14th Generation Processor Family 8 Gb Memory Ddr5 Memory 512 Gb Nvme Ssd Gen. 4 23.8 Inch Full Hd Native 1920 X 1080 With Mouse And Keyboard With Licensed Windows 11 Os Installed With Lan, Wifi And Bluetooth Vga/dvi-d, Hdmi Or Display Port 14 Units 5) Printer 3-in-1 W/ Adf, A3 Color Printer 800 Nozzles Black, 256 Nozzles Per Color (cmy) Can Print Up To A3+ Size Paper Wifi, Wifi Direct And Ethernet Connection 4800 X 2400 Dpi Hi-speed Usb 2.0 Connectivity Duplex Printing Capable, Up To A3 Scan And Copy Thru Adf Scan And Copy Thru Glass Bed Bi-directional Printing Up To 25 Ipm Printing Speed With Consumables 100-240v Voltage, 50-60hz Frequency 10 Units 6) Portable Printer Print Speed Up To 14ppm With Built-in Battery Colour Lcd Panel Wifi And Wifi Direct Connectivity Bi-directional/uni-directional Printing Hi-speed Usb 2.0 Connectivity 14 Units 7) Multi-function Printer (for Pvc Id Card) Friction Feed Pvc Id Card Printing Enabled Micropiezo Printhead Bi-directional Printing 1.5pl Minimum Ink Droplet Size Maximum Print Resolution Of 5760 X 1440 Dpi With Variable-sized Droplet Technology Usb 2.0 Connection Wireless Capable Esc/p-r, Esc/p Raster Language With Bundled Consumables With Additional 1 Set Extra Consumables 3 Units 8) Multi-function Printer Printer Type: Print, Scan, Copy And Fax Maximum Resolution: 4800 X 1200 Dpi Print Speeds Up To 15.5ipm For Black And 8.5ipm For Colour Auto-duplex Printing Adf Capability Ethernet & Wi-fi Direct Colour Touch Lcd Screen Usb 2.0 Connectivity 15 Units 9) 3-in-1 Network Printer/ Scanner/ Photocopier Printer Type: Print/copy/scan/fax Precisioncore Printhead Bi-directional Printing 4800 X 1200 Dpi Maximum Resolution 2-sided Printing Capable 600 X 600dpi Copy Resolution Friction Paper Feed Front And Rear Tray With Lcd Screen Network: Ethernet, Wi-fi Ieee 802.11b/g/n, Wi-fi Direct Usb 2.0 Connection Ac 220-240v 50-60hz Up To A3 And A3+ Paper Size Cassette Capacity Of 250 Sheets For A4 (80gsm) Rear Capacity Of 20 Sheets For A3+ (80gsm) Up To 5.0 Ipm Scan Speed @200dpi With Bundled Consumables With Additional 1 Extra Set Of Consumables With 1 Piece Maintenance Box 10 Units 10) Dot Matrix Printer Impact Dot Matrix 9-pin Wide Carriage Up To 496cpi Prints Up To 6-part Forms 15,000 Power On Hours Mtbf Usb 2.0, Bi-directional Parallel Supported Bi-direction With Logic Seeking 200 Million Strokes/wire Printhead Life 2 Units 11) Flatbed Scanner Minimum Technical Specifications: Colour Scanner A4 Sheet-fed, 3-pass Duplex Scanner Led Light Source 1,200 X1,200 Dpi Output Resolution 215.9 X 3,048 Mm Maximum Document Size Supports 50 Gsm – 120 Gsm Paper Thickness 50 Sheets Adf Capacity Scan Speed Up To 25ppm/10ipm (300 Dpi) 24 Units 12) Portable Document Scanner A4 Sheet-fed, Simplex Colour Scanner Optical Resolution: 600 X 600 Dpi Output Resolution: 50 – 1,200 Dpi 216 X 1,828.8 Mm Maximum Document Size Contact Image Sensors (cis) Compact Size And Footprint Powered Via Usb, Ac Adapter Or Built-in Battery Scan Speed Up To 4.0sec Per Sheet (on Battery) Usb 2.0, Wi-fi And Wi-fi A/p Mode Connectivity 20 Units 13) Projector (indoor) Native Resolution Full Hd (1080p) Large Screen Projection Up To 391" 3000 Lumens Of Colour And White Brightness Comes With Android Tv™2 Dongle And Chromecast Built-in™ 5w Speaker (with Enclosure) Life (normal / Eco): 6,000 / 12,000 Hours (normal / Eco) F-number: 1.44 Focal Length: 16.4mm Zoom Ratio: 1.0 – 1.35 (digital Zoom) Throw Ratio: 1.19 – 1.61 Usb Type A: 1 (for 2a Power Supply, Firmware Update And Copy Osd Settings) Usb Type B: 1 (for Firmware Update And Copy Osd Settings) Hdmi: 1 (hdcp 1.4) 10 Units 14) Dslr Camera 24.2mp Aps-c Cmos Sensor Dual Pixel Cmos Af Ii 4k30 Video, 4k60 With Crop; Hdr-pq 23 Fps E. Shutter, 15 Fps Mech. Shutter 2.36m-dot Oled Evf 1.04m-dot Vari-angle Touchscreen Lcd Multi-function Shoe, Wi-fi And Bluetooth 18-45mm F/4.5-6.3 Is Stm Lens Lithium-ion Battery Pack Charger For Battery Pack 8 Units 15) Portable Audio System (branded) Digital Wireless Microphone Included Output Power: At Least 1100 Watts 30hz-20khz (-6db) Dynamic Frequency Range With 3.5mm Audio Cable Input Bluetooth Connection Usb Playback Guitar And Microphone Input True Wireless Stereo Using Bluetooth Connection With Rca Output Microphone Specifications: Frequency: 2404 - 2478mhz Encryption: Aes - 128 Working Range: 30m (100ft) Latency: < 12ms Frequency / Channel Selection: Adaptive Channel Selection Frequency Response: 50hz - 15khz Dynamic Range: 100db@ 1k Hz Signal -to -noise: 59dba Thd: < 1% @ 94db Spl, 200 - 10khz Microphone Rechargeable Battery: 600mah, 3.7v Li-ion Battery Dongle Battery: 700mah 3.7v Li-ion Battery Playtime Of Microphone: Up To 20 Hours Playtime Of Dongle: Up To 12 Hours Microphone Battery Charge Time: < 2.5h In Off Mode Dongle Battery Charge Time: < 2.5h In Off Mode Microphone Head: 16mm Ecm Transmitting Power: < 10dbm Receiver Maximum Output Level: < 1v Rms 6 Units 16) Handheld Gps Receiver 2.2" Transflective, 65k Color Tft Display Type 240 X 320 Pixels Display Resolution 25 Hrs Battery Life Ipx7 Water Rating High-sensitivity Receiver 2 Aa Nimh Or Lithium Rechargeable Batteries And Charger Included 30 Units 2 Supply, Delivery And Subscription To Various Ict Software 1 Lot 2,900,000.00 2,900,000.00 1) Graphic Design Platform 1tb Of Cloud Storage 1000 Brand Kits 100m+ Photos, Videos, Graphics, Audio Ai-generated Writing And Designs Unlimited Premium Templates Ai Admin Controls Edit, Comment, And Collaborate In Real-time With Online Customer Support 3-year Subscription *1 Account = 3 Users 5 Units 2) Cad Modeling Software Civil-infrastructure/engineering Design And Documentation Software Supports Computer-aided Design And Building Information Modeling Site And Survey Workflows Drainage Design And Analysis Plan Production And Documentation Intersection Design Corridor, Geotechnical And Terrain Modeling Commercial New Single User With Electronic-license Delivery (eld) 1 Year Subscription 2 Units 3) Cad And Drafting Software With Specialized Toolsets Commercial New Single User 2d Crafting, Drawing & Annotation 3d Modeling & Visualization Architecture, Mechanical, Map 3d, Electrical, Plant 3d And Raster Design Toolsets Commercial New Single User With Electronic-license Delivery (eld) 3 Year Subscription 2 Units 4) Cad And Drafting Software With Specialized Toolsets Commercial New Single User 2d Crafting, Drawing & Annotation 3d Modeling & Visualization Architecture, Mechanical, Map 3d, Electrical, Plant 3d And Raster Design Toolsets Commercial New Single User With Electronic-license Delivery (eld) 1 Year Subscription 2 Units 5) Office Productivity Software On Premise - Open License Graphical User Interface/keyboard Driven Menu System Support In Inserting And Editing 3d Models Support To Scalable Vector Graphics (svg) With Filters Live Preview While Formatting With Built-in Language Translator Support For Touch-enabled Devices, Digital Pens And Mouse For Drawing Shapes, Writing Out Complex Math Problems And Highlighting Text. With Accessibility Checker With Support For International Standards 45 Units 3 Supply, Delivery, Installation And Configuration Of Ict Network Equipment Of Da-rfo 1 1 Lot 4,620,000.00 4,620,000.00 1) Network Firewall Subscription At Least 3yrs Throughput Ngfw, Ips & Threat Protection: 1.6, 2.6 & 1 Gbps Concurrent Ssl-vpn Users: 500 2.2 Gbps Application Control Throughput Capwap Throughput (http 64k): 15gbps Heat Dissipation: At Least 100.6 Btu/h 80plus Compliant Power Supply Efficiency Rating Ports: 2 Ge Rj45 Wan, 4 Ge Rj45 Or Sfp Shared Ports, 1 Console And Usb Port Concurrent Tcp Sessions: 1.5million 10,000 Firewall Policies Throughput Ipsec Vpn: 11.5 Gbps Compliance Fcc Part 15b, Class A, Ce, Rcm, Vcci,ul/cul, Cb, Bsmi Ac Power Supply 100–240v Ac, 50/60 Hz Form Factor (supports Eia/non-eia Standards) Rack Mount, 1 Ru With Complete Accessories & Compatible With Existing Network Setup. 1 Unit 2) Network Switch (access) 10/1g Uplink Ports Forwarding And Switching Rate: 261.9 Mbps & 176 Gbps Per Hour Mean Time Between Failures: At Least 503,400 Jumbo Frames Capacity: 9198 Bytes Flash And Dram: 4gb And 2 Gb Entries Of Flexible Netflow: 16,000 Flows On 24 Or 48 Port Gigabit Ethernet Models Bandwidth Stacking: At Least 80 Gbps Mac Addresses Total And Ipv4 Routes: At Least 16,000 And 11,000 Routing Entries For Ipv4 & Ipv6: 3,000 & 1,500 Qos Scale & Acl Entries: 1000 With Complete Accessories & Compatible With Existing Devices. 1 Unit 3) Wireless Lan Controller (bundled With 6-ap & Licenses) Fixed Service Port: Auto-negotiation 10/100/1000base-t, Auto Mdi/mdix Crossover Standard Rj45 & Usb Port Management Port 40w Max. Power Consumption 200,000 Hours Mean Time Between Failure (mtbf) At The Standard Temperature 2048 Maximum Number Of Configurable Access Points Default Number Of Manageable Access Point Of 32 448 Maximum Number Of Manageable Access Point Wlan Service: 2048 Maximum Wlan Id At Least 32,768 Mac Address Entries 4096 Of Virtual Lans Ipv4 Address Pools: 2,000 Ipv4 Addresses: 24,576 Ipv6 Address Pools: 256 Ipv6 Addresses: 2,048 Ieee 802.11 Protocols: 802.11, 802.11b, 802.11a, 802.11g, 802.11d, 802.11h, 802.11w, 802.11k, 802.11v, 802.11r, 802.11i, 802.11e, 802.11n, 802.11ac, And 802.11ax Ieee 802.11 Security And Encryption: Multi-ssid Mode,ssid Hiding Ieee 802.11i-compliant Psk Authentication, Wpa And Wpa2,wpa3: Wpa3-personal (sae), Wpa3-enterprise (ccmp, 128-bit), And Wpa3-enterprise (gcmp, 192-bit),wep (wep/wep128), Tkip, Ccmp, Anti-arp Spoofing User Access Management: Console Port Login, Telnet Login, Ssh Login, And Ftp Upload Maximum Number Of Stas Supported By The Built-in Portal Server:1,500 Number Of Acl Entries:65,536 Entries With Six (6) Compatible Wireless Access Point With Six (6) Licenses Included Bundled With Training And Certification With Complete Accessories. 1 Unit 4) Network Attached Storage (nas) 64 Bit Cpu Architecture Cpu Frequency: 2.6 / 3.1 Ghz System Memory 2gb Ddr4 Ecc Drive Bays: At Least 4 Compatible Drive Type: 3.5" Sata Hdd & 2.5 Sata Ssd External Ports: 2 Rj-45 1 Gbe Lan Ports, 1 Usb 3.2 Gen 1 Port Pcie Expansion: 1 X Gen3 X 2 Network Upgrade Slot System Fan: 40mm X 40mm X 3pcs 28.5 Db(a) Noise Level Power Supply Unit : 100 Watts Power Consumption: 37.93 Watts (access), 13.43 Watts (hdd Hibernation) Rohs Compliant Bundled With At Least 4 Hdd (16tb) With Complete Required Accessories 2 Units 5) Ups 10kva (rack-mounted) Capacity: 10kva Rackmounted With Battery Input: Voltage: 200-240v +/- 10% Voltage Range: 176-3000v +/- 10% (full Load) Frequency: 56hz - 64hz Battery: 16 X 12v/9ah Output Voltage: 220-240v +/- 10% Frequency: 50hz-60hz +/- 5% Transfer Time: 0 (ac To Battery), 0ms (inverse To Bypass) True Double Conversion Microprocessor Control Technology Ensures High Reliability Input Power Factor Correction Output Power Factor 0.8 Waveform (batt Mode): Pure Sine Wave With Complete Accessories And Warranty. 4 Units 6) Wireless Access Point Max Throughput Up To 400mbps At 2.4g, Up To 867 Mbps At 5g 1.267 Gbps Ofdm: Bpsk@6/9mbps, Qpsk@12/18mbps, 16-qam@24mbps, 64-qam@48/54mbps Protocol: Concurrent 802.11ac Wave2, Wave1, 802.11a/b/g/n Spatial Streams: 2.4g 2x2mimo 5g 2x2mimo Antenna: Internal Antennas（2.4g: 2dbi，5g: 2dbi） Operating Bands: 802.11b/g/n: 2.4g ~ 2.4835ghz, 802.11a/n/ac: 5g：5.150～5.250ghz，5.725～5.850ghz 11b: -91dbm (1mbps), -88dbm (5mbps), -85dbm (11mbps) 11a/g: -89dbm (6mbps), -80dbm (24mbps), -76dbm (36mbps), -71dbm (54mbps) 11n: -83dbm@mcs0, -65dbm@mcs7, -83dbm@mcs8, -65dbm@mcs15 11ac Ht20: -83dbm (mcs0), -57dbm (mcs9) 11ac Ht40: -79dbm (mcs0), -57dbm (mcs9) 20 Units 7) Unmanaged Switch Ports:16 X 10/100base-x Poe+ Ports, 2 X 10/100/1000base-t Ports With 2-port Gigabit Rackmount Poe Switch Layer Type: Unmanaged Switching Capacity:7.2 Gbps Forwarding Rate:5.36 Mpps Mac Address Table:8000 Fan: Fanless Port Surge:6kv 4 Units 8) Ups 1kva Available Capacity : 1kva / 600w Line Interactive Switching Ups 2 X 12v7ah Battery Input Power : 190~240va (50~60hz) Output Power : 220~230va (50~60hz) 24 Units 9) Drone (quadcopter) Gimbal:3-axis Flight Control System: Gnss Support Gps, Beidou, Galileo Maximum Operating Distance:9.3 Miles / 15 Km Battery Capacity:5000 Mah / 77 Wh Charging Temperature 41 To 104°f / 5 To 40°c Maximum Ascent Speed 17.9 Mph / 8 M/s Maximum Descent Speed 13.4 Mph / 6 M/s Maximum Wind Resistance 26.8 Mph / 12 M/s Flight Ceiling 3.7 Miles / 6000 M Image Sensor:4/3″-type Cmos Sensor Resolution Effective: 20 Megapixel (5280 X 3956) Focal Length: 24mm (35mm Equivalent) Field Of View: 84° Maximum Aperture: F/2.8 Minimum Aperture: F/11 Minimum Focus Distance:3.3′/1 M Rotor Configuration: 4 Operating Temperature:14 To 104°f/-10 To 40°c With Complete Accessories, Controller Device, Bag And Extra Batteries And Propeller. Bundled With Formal Drone Pilot And Safety Training, Drone Pilot License & Rpas Certifications Acquisition. 1 Unit 4 100-port Data And Voice Structured Cabling With Fiber Optic Cable Backbones 1 Lot 1,000,000.00 1,000,000.00 Managed Switch Bandwidth Stacking: At Least 80 Gbps Entries Of Flexible Netflow: 32,000 On 24 Or 48 Port Multigigabit Models Stacking Switch Capacity & Forwarding Rate: 256 Gbps & 190 Mbps Jumbo Frames Capacity: 9198 Bytes Flash And Dram: 4gb And 2 Gb Forwarding And Switching: At Least 130.95 Mbps And 176 Gbps Per Hour Mean Time Between Failures: At Least 346,270 Mac Addresses Total And Ipv4 Routes: At Least 16,000 And 11,000 Routing Entries For Ipv4 & Ipv6: 3,000 & 1,500 Sfp Transceiver Module Hot Pluggable Sfp Msa Compliant To Maximize Uptime And Simplify Maintenance Modal Bandwidth Min :400 At Least 1804 Ft. Operating Distance Stackwise Cables Support 16 Gbps Speeds In Both Directions, Yielding A Traffic Total Of 32 Gbps Bandwidth Bidirectionally Cable Length:1.6 Ft Conductor: Copper Network Server Rack Cabinet Minimum Technical Specifications: Capacity: 22u With Exhaust Fans And Power Distribution Cables, I/o Ports And Accessories 1 Lot Roughing-in Materials For Horizontal And Backbone Distribution 1 Lot Roughing-in Materials For Fiber Backbone Distribution 1 Lot Mobilization / Demobilization 1 Lot Testing And Commissioning 1 Lot Preparation, Documentation Of As-built Plan Drawings And Turn-over Of Network Design And Diagram 1 Lot Cables, I/o Ports And Accessories 1 Lot Grand Total 16,432,000.00 All Equipment With 1 Year Warranty On Parts & Services. Drop Off Point: Da Rfo I, City Of San Fernando, La Union Delivery Schedule: 90 Calendar Days From Receipt Of Notice To Proceed (ntp). Delivery Of The Goods Is Required Within 90 Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm, Monday To Friday. Department Of Agriculture Regional Field Office 1 Aguila Rd., Sevilla, City Of San Fernando, La Union 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From January 7-27, 2025 From The Address Given And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Following Amounts: Project Title Bid Docs Fee Lot 1: Supply And Delivery Of Various Ict Equipment 10,000.00 Lot 2: Supply, Delivery And Subscription Of Various Ict Software 5,000.00 Lot 3: Supply, Delivery, Installation And Configuration Of Various Ict Network Equipment 5,000.00 Lot 4: Supply, Delivery, Installation And Configuration Of 100-port Data And Voice Structured Cabling With Fiber Optic Cable Backbones 1,000.00 The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. Note: For Lot Procurement, The Maximum Fee For The Bidding Documents For Each Lot Shall Be Based On Its Abc, In Accordance With The Guidelines Issued By The Gppb; Provided That The Total Fees For The Bidding Documents Of All Lots Shall Not Exceed The Maximum Fee Prescribed In The Guidelines For The Sum Of The Abc Of All Lots. 6. The Da-rfo 1 Will Hold A Pre-bid Conference On 14 January 2025, 1:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Above On Or Before 27 January 2025, 1:00 Pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 27 January 2025, 1:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union. Bids Will Be Opened In The Presence Of The Bidders Or Their Authorized Representatives. 10. Additional Instructions To Bidders: A. The Bidders Or Their Duly Authorized Representatives May Attend The Bid Opening; B. In Case A Representative Will Be Attending The Bid Opening, A Special Power Of Attorney (spa), Secretary’s Certificate, Board Resolution Or Any Other Forms Of Authorization (notarized), As The Case May Be, Together With The Company-issued Identification Card Or Any Valid Id Must Be Presented Upon Submission Of The Bid Proposal At The Bac Secretariat. The Name/title Of The Project Must Be Indicated In The Authorization Or Spa. C. Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. Bidders Shall Submit Their Bids With Proper Index Tabbing Using The Forms Specified In The Bidding Documents In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously; The First Component Which Is The Technical Eligibility Requirements Must Be Soft-bound, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Second Component Being The Financial Eligibility Requirements Can Be Fastened In A Folder, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Technical And Financial Requirement Each In Separate Envelopes, Shall Be Enclosed In A Mother Envelope With The Same Sealing And Markings. Non-compliance With Index Tabbings Shall Not Be A Ground For Outright Disqualification Or Declaration Of Ineligibility. The Improper Index Tabbings Must Be Duly Acknowledged By The Bidder/representative And Be Subject To The Bid Evaluation And Post-qualification Of The Technical Working Group (twg) As To Their Substance. D. All Documents In The Financial Requirements Envelope Must Be Duly Signed And/or Initialed By The Bidder/authorized Representative On Each And Every Page Thereof. 11. The Da-rfo 1 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And Section 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Dennis I. Tactac, Abe Chairperson, Bids And Awards Committee Department Of Agriculture - Regional Field Office 1 Aguila Road, Sevilla, City Of San Fernando, La Union Tel. No. :(072) 242/1045-46, Ext. 07 E-mail Add: Bacsec@ilocos.da.gov.ph 13. For Downloading Of Bidding Documents, You May Visit The Following Websites: Da-rfo 1 Website: Https://ilocos.da.gov.ph/ Philgeps Website: Https://www.philgeps.gov.ph/ January 6, 2025 Approved: (sgd.) Gilbert D. Rabara, Dvm Vice-chairperson, Bids And Awards Committee Invitation To Bid Identification No. Da-rfo 1-2025-goods-032

Details: Description Republic Of The Philippines Batangas State University Batangas City Request For Quotation "procurement Of Future Server Upgrade Of Internet And Pipeline Of Shared Storage System In The University" 1. The Batangas State University (batstate U) Through The Bids And Awards Committee Invites Interested Firms/supplier To Submit Quotation For The Project "procurement Of Future Server Upgrade Of Internet And Pipeline Of Shared Storage System In The University" With An Approved Budget For The Contract (abc) Three Million Two Hundred Eighty-six Pesos And Sixty Centavos Only (php 3,000,286.60). Quotation Received In Excess Of The Abc Shall Be Automatically Rejected At The Opening. Item No. Qty Description Total 1 1 Unit Apc Extended Run - Power Array Cabinet With Metered Rack Pdu The Apc® Symmetra Lx Extended Run Tower With 9 Sybt5 Provides Fast Serviceability And Reduced Maintenance Requirements Via Self-diagnosing, Field-replaceable Modules. Its Modular Design Increases Adaptability With An Open Architecture Configurable To Any It Environment And Can Be Deployed As A Nonstandby And Migrate To A Standby (ups) System. With Hot-swappable Batteries, Ensures Clean, Uninterrupted Power To Protected Equipment While Batteries Are Being Replaced And It Delivers Higher Availability Through Redundant Batteries. Battery Modules Connected In Parallel; Hot-swappable Batteries; Modular Design; Plug-and-play External Batteries; Stackable External Battery Frames; User-replaceable Batteries. Technical Specifications General Device Type Power Array Cabinet - External Battery Enclosure Type Plug-in Module Color Black Power Device Supported Battery Technology Lead Acid Input Voltage Ac 208 V Battery Quantity 9 (supported) 9 Technology Lead Acid Voltage Provided 120 V Miscellaneous Compliant Standards Csa, Ul 1778 956,502.60 Page 1 Of 5 Item No. Qty Description Total Manufacturer Warranty Service & Support Limited Warranty - 2 Years Environmental Parameters Min Operating Temperature 32 °f Max Operating Temperature 104 °f Humidity Range Operating 0 - 95% Dimensions & Weight Width 19 In Depth 28.6 In Height 23.7 In Weight 769.41 Lbs Compatibility Information Designed For P/n: Isxcr1sy16k16p5, Isxt216md1ri, Sya12k16i, Sya12k16ich, Sya12k16ixr, Sya12k16ixrch, Sya12k16p, Sya12k16pxr, Sya12k16rmi, Sya12k16rmich, Sya12k16rmp, Sya16k16i, Sya16k16ich, Sya16k16ixr, Sya16k16ixrch, Sya16k16p, Sya16k16pxr, Sya16k16rmi, Sya16k16rmich, Sya16k16rmp, Sya4k8i, Sya4k8p, Sya4k8rmi, Sya4k8rmp, Sya8k16i, Sya8k16ich, Sya8k16ixr, Sya8k16p, Sya8k16px798, Sya8k16pxr, Sya8k16pxrx798, Sya8k16rmi, Sya8k16rmich, Sya8k16rmp, Sya8k8i, Sya8k8p, Sya8k8px798, Sya8k8rmi, Sya8k8rmp, Sya8k8rmpnx424, Syaf16krmich Netshelter Metered Rack Pdu, 0u, 1ph, 3.3kw 208v 16a Or 3.7kw 230v 16a, 18 C13 And 2 C19 Outlets, C20 Inlet (10 Units) Key Features Output Connections: - (2) Iec 60320 C19 - (18) Iec 60320 C13 Nominal Output Voltage: 100v, 200v, 208v, 230v Nominal Input Voltage: 200v, 208v, 230v Input Connections: Iec 60320 C20 Technical Specifications Output Overload Protection: No Maximum Total Current Draw: 16 Input Input Frequency: 50/60 Hz Acceptable Input Voltage: 100 - 240vac Load Capacity: 3300va Maximum Input Current: 20a Regulatory Derated Input Current (north America): 16a Physical Maximum Height: 902mm, 90.2cm Maximum Width: 56mm, 5.6cm Maximum Depth: 44mm, 4.4cm Page 2 Of 5 Item No. Qty Description Total Net Weight: 2.93kg Shipping Weight: 4.19kg Shipping Height: 1124mm, 112.4cm Shipping Width: 162mm, 16.2cm Shipping Depth: 107mm, 10.7cm Color: Black Environmental Operating Temperature: -5 - 60 °c Operating Relative Humidity: 5 - 95 % Operating Elevation: 0 - 3048meters Storage Temperature: -25 - 65 °c Storage Relative Humidity: 5 - 95 % Storage Elevation: 0 - 15240meters Conformance Approvals: Csa C22.2 No 60950, Iec 60950, Meti Denan, Ul 60950-1, Vde Standard Warranty: 2 Years Repair Or Replace Sustainable Offer Status Rohs: Compliant Pep: Available In Documentation Tab Eoli: Available In Documentation Tab 2 6 Unit Apc8841 Metered Pdu (rackmount) Rack Pdu 2g, Metered-by-outlet, Zerou, 30a, 200/208v, (21) C13 & (3) C19 375,984.00 3 1 Piece Aluminum Telescopic Ladder Telescopic Ladder Size 5.0 M Weight 17.7 Kg Dimensions (wxh Cm) Closed 48 X 90 Open A Position 48 X 250 Straight Position 48 X 500 11,800.00 4 6 Unit Base Station Antenna Tri-radio Wifi 5 Ap With 12 Spatial Streams And A Selectable Beamforming Antenna, Designed For High-density Applications At Large Venues. Wifi 5 (5 Ghz Only) 12 Spatial Streams 465+ M² (5,000+ Ft²) Open Space Coverage 1,500+ Connected Devices Powered Using Poe++ (1) Gbe And (1) 10 Gbe Uplink Versatile Wall And Pole Mounting Phased Array Antenna System With Software-adjustable Coverage (50° Or 90°) Weatherproof (outdoor Exposed) 510,000.00 5 20 Unit Battery Module (sybt5) Sybt5 Apc Symmetra Lx 4kva Battery Module 720,000.00 6 20 Unit Lot 4: Ethernet Cards Network Adapter The Equipment Shall Be Brand New And Free From Defects Device Type: Network Adapter Form Factor: Plug-in Card - Low Profile Interface (bus) Type: Pci Express 3.0 Pci Specification Revision: Pcie 3.0 Ports: 10gb Ethernet X 2 Connectivity Technology: Wired Cabling Type: Ethernet 10gbase-t Data Link Protocol: 10 Gigabit Ethernet, Fibre Channel Over Ethernet (fcoe), Iscsi 336,000.00 Page 3 Of 5 Item No. Qty Description Total Data Transfer Rate: 10 Gbps "capacity: Qos Virtual Ports: Up To 64 Vlan Tags: Up To 4096" Network / Transport Protocol: Tcp/ip, Udp/ip, Ipsec, Iscsi, Smb, Nfs, Sctp Remote Management Protocol: Snmp, Dmi 2.0 "features: Mac Address Filtering, Ipv6 Support, Quality Of Service (qos), Virtual Machine Device Queues (vmdq), Ipv4 Support, Single Root I/o Virtualization (sr-iov), Tcp Segmentation Offload (tso), Pxe 2.0 Support, Extended Message-signaled Interrupts (msi-x), Virtual Extensible Lan (vxlan), Network Virtualization Using Generic Routing Encapsulation (nvgre), Intel Flow Director, Flexible Port Partitioning (fpp), Multi-mode I/o Virtualization Operations, Vlan Filtering, Intelligent Offloads" Compliant Standards: Ieee 802.1q, Ieee 802.1qbg Interfaces: 2 X 10gbase-t - Rj-45 Included Accessories: Low-profile Bracket Compliant Standards: Plug And Play, Rohs "os Required: Linux Kernel 2.6 Or Later Microsoft Windows Server 2008 R2 X64, Microsoft Windows Server 2012 X64, Microsoft Windows Server 2012 R2 X64, Windows 7/8/8.1/10 X64 Vmware Esxi 5.5 Or Later Red Hat Enterprise Linux 6.7 Or Later Suse Linux Enterprise Server 11 Or Later Freebsd 10.2 Or Later" 7 30 Unit Sfp-10g-t Compatible Taa 100/1000/10000base-tx Sfp+ Transceiver (copper, 30m, Rj-45) Technical Specifications Compatible Oem: Dell® Compatible With Oem Part Number(s): Sfp-10g- T Transceiver Type: Tx Reach: 30m Connector: Rj45 Form Type: Sfp+ Wavelength: N/a Media: Copper Speed Description: 10-gigabit Environment: 0 To 70c Speed: 100/1000/10000base Dom: Non:dom Physical Specifications Product Shipping Dimension(hxwxd): 1.2 In. X 2.75 In. X 4.75 In. Product Shipping Weight(lb): 0.4 Miscellaneous Country Of Origin: Usa/uk Eccn: 5a991 Hts-harmonized Code (uk): 85176200 Hts-harmonized Code (us): 8517.62.0090 Taa Compliant: Yes Unspsc Code: 43201553 Upc Code: 821455820278 What's In The Box: 1x Transceiver 90,000.00 Page 4 Of 5 Item No. Qty Description Total Note: Kindly Indicate The Brand On Your Quotation. 2. Philgeps Registration Certificate And Other Business Permits Shall Be Attached Upon Submission Of The Quotation. 3. The Quotation Must Be Submitted (can Also Be Send Thru Fax And Email At The Contact Details Listed Below) Or To The Rizal Avenue Extension, Batangas City And Shall Be Received By The Committee On Or Before 5:00 Pm Of January 13, 2025. E-mail : Procurement.central.external@g.batstate-u.edu.ph 4. The Bsu Reserves The Right To Reject Any Or All Quotations And/or Proposals And Waive Any Formalities/informalities Therein And To Accept Such Bids It May Consider As Most Advantageous To The Agency And To The Government. Batstate U Neither Assumes Any Obligation For Whatsoever Losses That May Be Incurred In The Preparation Of Bids, Nor Does It Guarantee That An Award Will Be Made. Mr. Jonas Erik L Ebora Assistant Director, Procurement Rizal Avenue Extension, Batangas City 980-0385 Loc. 1230

Details: 5. Project Number (if Applicable) code 7. Administered By 2. Amendment/modification Number code 6. Issued By 8. Name And Address Of Contractor 4. Requisition/purchase Req. Number 3. Effective Date 9a. Amendment Of Solicitation Number 9b. Dated page Of Pages 10a. Modification Of Contract/order Number 10b. Dated bpa No. 1. Contract Id Code facility Code code offers Must Acknowledge Receipt Of This Amendment Prior To The Hour And Date Specified In The Solicitation Or As Amended, By One Of The Following Methods: the Above Numbered Solicitation Is Amended As Set Forth In Item 14. The Hour And Date Specified For Receipt Of Offers e. Important: is Extended, (a) By Completing Items 8 And 15, And Returning __________ Copies Of The Amendment; (b) By Acknowledging Receipt Of This Amendment On Each Copy Of The offer Submitted; Or (c) By Separate Letter Or Electronic Communication Which Includes A Reference To The Solicitation And Amendment Numbers. Failure Of Your acknowledgment To Be Received At The Place Designated For The Receipt Of Offers Prior To The Hour And Date Specified May is Not Extended. 12. Accounting And Appropriation Data (rev. 11/2016) is Required To Sign This Document And Return ___________ Copies To The Issuing Office. is Not, a. This Change Order Is Issued Pursuant To: (specify Authority) The Changes Set Forth In Item 14 Are Made In The Contract Order No. In Item 10a. 15c. Date Signed b. The Above Numbered Contract/order Is Modified To Reflect The Administrative Changes set Forth In Item 14, Pursuant To The Authority Of Far 43.103(b). result In Rejection Of Your Offer. If By Virtue Of This Amendment You Desire To Change An Offer Already Submitted, Such Change May Be Made By Letter or Electronic Communication, Provided Each Letter Or Electronic Communication Makes Reference To The Solicitation And This Amendment, And Is Received Prior To the Opening Hour And Date Specified. c. This Supplemental Agreement Is Entered Into Pursuant To Authority Of: d. Other contractor 16c. Date Signed 14. Description Of Amendment/modification 16b. United States Of America except As Provided Herein, All Terms And Conditions Of The Document Referenced In Item 9a Or 10a, As Heretofore Changed, Remains Unchanged And In Full Force And Effect. 15a. Name And Title Of Signer 16a. Name And Title Of Contracting Officer 15b. Contractor/offeror standard Form 30 previous Edition Not Usable prescribed By Gsa - Far (48 Cfr) 53.243 (type Or Print) (type Or Print) (organized By Ucf Section Headings, Including Solicitation/contract Subject Matter Where Feasible.) (number, Street, County, State And Zip Code) (if Other Than Item 6) (specify Type Of Modification And Authority) (such As Changes In Paying Office, Appropriation Date, Etc.) (if Required) (see Item 11) (see Item 13) (x) check one 13. This Item Applies Only To Modifications Of Contracts/orders, it Modifies The Contract/order No. As Described In Item 14. 11. This Item Only Applies To Amendments Of Solicitations amendment Of Solicitation/modification Of Contract (signature Of Person Authorized To Sign) (signature Of Contracting Officer) 1 5 0001 01-02-2025 544-25-2-4075-0004 none 36c247 department Of Veterans Affairs visn 7 Network Contracting Activity central Alabama Healthcare System 215 Perry Hill Road montgomery Al 36109 36c247 department Of Veterans Affairs visn 7 Network Contracting Activity 215 Perry Hill Road montgomery Al 36109 to All Offerors/bidders 36c24725q0195 x x x x 1 this Amendment To Solicitation 36c24725q0195 Is To Do The Following: (1) Add Additional Language To The Scope Of Work (2) Provide Responses To The Request For Information (rfi) Received Prior To Due Date (see Attached). *all Other Terms And Conditions Remain Unchanged. quentin Deloney contracting Officer, Nco-07 page 5 Of 5 request For Information 36c24725q0195 facility Mover And Event Set-up Services *any Questions Received That Have Not Been Answered In This Amendment Have Already Been Addressed In The Posted Solicitation. scope Of Work Is Amended To Add The Following: The Contractor Shall Furnish All Contract Oversight, Management; Supervisory And Technically Trained Personnel; Uniforms; Equipment, Materials, And Supplies Necessary To Provide Commercial Office Moving And Relocation Services For Cavhcs. This Includes, But Is Not Limited To The Following, Providing All Labor, Materials, And Equipment Necessary To Accomplish The Work As Stated Herein, E.g., Excess Property Pickup; Furniture Installation; Systems Furniture Installation, Breakdown And Repair; Routine Moving Services Activities; Special Event Set-ups And Breakdown; Special Furniture Cleaning And Repair; Special Moving Activities; Place Furnishing In Designated Storage Areas In An Organized Manner; And Special Handling Moving Activities. Contractor Shall Furnish All Vehicles, Insurance, Drivers, Supervision, Maintenance, Equipment, And Operating Supplies/services Required For The Safe Transport Of The Property And Performing All Services Necessary To Provide Moving And Relocation Services. 1. Confirm There Are 6 Locations With 4 Being In Alabama And 2 In Ga. That Will Need To Be covered. -9 Possible Work Locations; 3 Georgia Locations; 6 Alabama Locations -215 Perry Hill Road, Montgomery, Al 36109-3725 (main Work Site) -8105 Veterans Way, Montgomery, Al 36117-3879 -2400 Hospital Road, Tuskegee, Al 36083 (main Work Site) -3753 Ross Clark Circle, Suite 4, Dothan, Al 36303-2291 -159 Whetstone Street, Monroeville, Al 36460-2625 -301 Andrews Ave, Fort Rucker, Al 36362-5107 -6635 Bass Road, Fort Moore, Ga 31905-5602 -2100 Comer Avenue, Plaza G, Columbus, Ga 31904-8725 -6910 River Road, Columbus, Ga 61904-2316 2. In The Previous Notification We Seen 2 Locations Located On A Military Base That Were Not Listed On the Solicitation. Will They Be Covered? -past Solicitations/contract Awards Will Not Be Addressed 3. Will The Us Veterans Affairs Be Assisting In Obtaining Military Passes To Gain Access To The bases? - When Delivering To Those Locations, Contractor Must Meet All Requirements By The Base To Gain Access. A Va Representative Will Be Onsite, But This Does Not Mean Any Of The Requirements Will Be Waived. Contractor Will Know At Least A Week In Advance Of Any Deliveries Going To The Base. 4. You Stated Work Is To Be Performed Mon- Fri. But Days Can Be Changed And On Calls Can Bedone. Please Clarify? -please Read The Solicitation In Its Entirety. Solicitation States As Needed Schedule Updates Shall Be Coordinated With And Approved By The Cor. Such Changes Will Be Coordinated In A Manner Both Parties Can Agree On. 5. Will There Be A Set Schedule Confirmed At The Beginning Of The Contract For The Duration Of the Contract? - No Set Schedule But Schedule Will Be Reasonable And Agreed Upon By Va And Contractor. 6. If No Set Schedule, When Will We Be Notified Services Are Needed? -a Week In Advance 7. Will The Va Be Able To Add Days On Through The Week With Last Minute Notices? -yes, As Long As The Hours Do Not Exceed The 860 Hours Allotted For The Year. 8. Is The Price Schedule 860 Hours? -please Read The Solicitation In Its Entirety. The Base And Each Option Year Is Allotted 860 Hours. 9. Is 860 Hours Guaranteed For The Year? -no; 860 Hours Worth Of Work Are Not Guaranteed To Be Used Each Year. 10. Are You Guaranteeing 8-hour Workdays? -no 11. Are We Working 1-2 Hours, 4-5 Hours, Or Full 8-hour Days? - Contractor Should Plan For Between 4 To 8-hour Days. 12. Will Items Be Left On The Truck From The Prior Day, Overnight, To Be Delivered The Following day? - The Government Does Not Expect Items To Be Left On Trucks. Contractor Is Responsible For Loading And Unloading Mover Vehicles, Therefore, It Is At The Contractor S Discretion And Cost To Store Any Items During Moving Activities And Should Be With The Approval And Proper Notification Being Made To The Cor. 13. Can You Clarify Excess Pickup? Are We Expected To Move Medical And It Equipment? Could You Give Examples Of Oversized Items? - This Could Be Cubical Panels, White/glass Boards, Desks, Etc.. Examples Of Oversized Equipment May Include Pews, Conference Room Tables, Desks, And Storage Cabinets. 14. Confirm That You Are Aware That There Are 6-8 Services Added On That Were Not There In The previous Years? Therefore, This Will Drive The Hourly Rate Up Tremendously. -previous Contract Awards; Solicitations; Or Occurrences Will Not Be Addressed. Only Clarifications On The Information Presented In The Current Solicitation Will Be Made. 15. Our Hourly Rate Are To Include Pricing For Equipment, Labor, Fuel, Miles, Etc..? -hourly Rate In Proposals Should Be All Inclusive. 16. Under Specialty Furniture Cleaning And Repair. Can You Clarify The Repair Service Needed? - Re-attaching Doors To Furniture; Replacing Missing Screws/nuts On Furniture; Replacing Arms On Task Chairs; Or Glides On Tables/chairs. 17. If A Repair Is Performed Who Takes The Liability Of That Item Breaking Again? - If A Repaired Item Breaks Due To The Repair Being Negligent, The Contractor Will Be Held Liable. 18. Will We Be Moving Equipment That Is Still Covered Under The Warranty? - Yes, Some Items May Be Under Warranty Such As Desk And Chairs. 19. Will We Be Mounting Items On Walls? Provide Examples? - Not On A Regular Basis. For Example, Some Workstations Mount To The Wall And Other Furniture Must Anchored To The Wall To Prevent Tilting. 20. Who Will Be Responsible For Holes In The Wall And Where Does That Fall Under The Lease agreements Of These Buildings And Who Will Be Responsible? 21. Could You Provide More Details On The Specific Tasks Involved In The Relocation, Moving, And Event Set-up Services - Please Read The Solicitation In Its Entirety 22. What Is The Expected Volume Of Items (e.g., Office Furniture, Equipment) To Be Moved And Set Up? - Unpredictable; As Needed Basis 23. Are There Any Special Handling Requirements (e.g., Fragile Or High-value Items)? -please Read The Solicitation In Its Entirety. 24. Can You Confirm If This Will Be A Firm-fixed-price Contract? -yes 25. Will The 860 Hours Be Paid Regardless Of Whether They Are Utilized? -no; Only Hours Worked Will Be Payable 26. Will This Be An On-call Contract, Or Will There Be A Confirmed Schedule? - For On Lease Properties, Movers Will Not Be Mounting Anything To The Wall. For The Two Main Campuses (central Alabama Veterans Health Care System East Campus 2400 Hospital Road, Tuskegee, Al 36083 And Central Alabama Veterans Health Care System West Campus 215 Perry Hill Road, Montgomery, Al 36109-3725) Cor Will Work With Maintenance To Repair Holes In The Wall From Furniture Removal. The Movers Are Not Expected To Paint Or Patch Unless The Movers Have Damaged Walls Or Doors Due To Negligence And/or Accident. 27. Are There Any Penalties For Delays Or Failure To Meet Performance Standards? -yes, Unsatisfactory Ratings; Opt-out Of Exercising Options; And Possible Termination For Cause 29. Are There Specific Quality Assurance Standards That Need To Be Adhered To? - Please See Attached Quality Assurance Plan Posted On Page 89.

Details: Description Terms Of Reference Procurement Of A Service Provider For The Preventive Maintenance And General Cleaning Of Philracom’s Air Conditioning System I. Project Description And Objective The Project Aims To Ensure That All The Air Conditioners Of Philracom Are Properly Maintained And Can Continuously Provide A Comfortable Interior Environment, Not Only To The Employees But Also To The Clients. This Will Be Achieved By Acquiring The Services Of A Reputable And Competent Service Provider Who Has The Capacity, Experience, And Expertise To Maintain And Recommend Replacement Of Parts And Accessories, If Necessary, Of Various Brands Of Air Conditioners. Ii. Approved Budget For The Contract (abc) And Fund Source Philracom Has Allocated An Approved Budget For The Contract In The Amount Of One Hundred Thousand Pesos (php 100,000.00), Inclusive Of All The Applicable Government Taxes And Charges, And Professional Fees. Fund For This Project Shall Be Sourced From The General Fund. Iii. Qualifications Of The Service Provider A. The Service Provider Must Have The Required Experience And Expertise To Carry Out The Preventive Maintenance Services. B. The Service Provider Must Be In The Business Of Air-conditioning Preventive Maintenance Services For At Least Three (3) Years (dti Registration, Business Permit). C. The Service Provider Must Have At Least Five (5) Government Agency Clients. D. The Service Provider Must Be Registered With The Philippine Government Electronic Procurement System (philgeps). Iv. General Requirements A. The Service Provider Shall Be Responsible For The Maintenance And Cleaning Twenty-six (26) Air-conditioning Units (types Varying From Window-type, Split-type, Floor-mounted, And Portable) Installed At Two Locations: 1. Philippine Racing Commission (philracom) Central Office, 4th Floor, Electra House Bldg., Esteban St., Legaspi Village, Makati City: Aircon Type Brand Capacity Location 1 Floor Mounted Koppel 3tr Board Room 2 Floor Mounted Koppel 3tr Hallway 3 Floor Mounted Samsung 3tr Fad 4 Floor Mounted Everest 3tr Rld 5 Wall Mounted Everest 3hp Legal 6 Wall Mounted Carrier 2.5hp Studbook 7 Wall Mounted Carrier 1.5hp Coa 8 Wall Mounted Condura 1.5hp Legal 9 Wall Mounted Lg 1.0hp Cashier 10 Wall Mounted Koppel 1.5hp Board Secretary 11 Window Type Kolin 2.5hp Budget 12 Window Type Kolin 2.0hp Chairman's Office 13 Window Type Kolin 2.0hp Oed 14 Window Type Kolin 0.75hp Accounting 15 Window Type Kolin 0.75hp Commissioner 1 16 Window Type Kolin 0.75hp Commissioner 2 17 Window Type Kolin 0.75hp Commissioner 3 18 Window Type Kolin 0.75hp Commissioner 4 19 Window Type Kolin 0.75hp Commissioner 5 20 Window Type Kolin 0.75hp Commissioner 6 21 Window Type Hitachi 1.0hp Rld 22 Portable Aircon Dowell 2.0hp Fid 2. Equine And Laboratory Diagnostic Section (elds), C.b. Contemprato Bldg., Sugar Road, Carmona, Cavite Aircon Type Brand Capacity Location 1 Wall Mounted Samsung 2.0hp Carmona, Cavite 2 Wall Mounted Carrier 1.0hp Carmona, Cavite 3 Window Type Gree 2.0hp Carmona, Cavite 4 Window Type Gree 2.0hp Carmona, Cavite B. The Semi-annual Preventive Maintenance And Cleaning Must Be Completed Based On The Following Schedule: 1. 1st Preventive Maintenance And Cleaning A. 01-10 April 2025 - Philracom Central Office, Makati B. 05-15 April 2025 - Elds Office, Cavite 2. 2nd Preventive Maintenance And Cleaning A. 01-10 October 2025 - Philracom Central Office, Makati B. 05-15 October 2025 - Elds Office, Cavite C. The Service Provider Shall Recommend Major Repairs And Parts Replacements, If Necessary. V. Scope Of Work A. The Service Provider Shall Provide Semi-annual Preventive Maintenance And Cleaning Of The Air-conditioning Units, Which Shall Include The Following: 1. General Cleaning Of All Air-conditioning Units Including All Internal Components; 2. Shutting Off The Unit; 3. Removal Of Air Filters For Cleaning And Recommendation For Replacement, If Necessary; 4. Inspection And Cleaning Of The Following Parts: - Coiling Coils (using Power Spray) - Fan Blades - Condenser Coil (with Pressure Washer) - Drain Line (by Flushing) - Blower Assembly - All Other Internal Components Of The Units 5. Greasing Of Motor Bearing And Other Moving Parts Requiring Lubrication; 6. Technical Audit Of Equipment Condition Including Freon Charging And Actual Electrical Reading Operation Of The Units; 7. Drying Of Internal Components Using Compressed Air; 8. General Service And Inspection Of All The Components Of The Air-conditioning System; 9. Assembly And Start-up; 10. Check-up And Repair Of Undesirable Noise And Vibration Of The Unit; 11. Observation Of The Compressor Performance And Recommendation Of Repair/replacement, If Necessary; 12. Check-up Of All Moving Parts Such As Fan Motor Bearing/bushing And Shafting Evaporator Blowers And Blade, And Recommendation Of Repair/replacement Of Parts, If Necessary; 13. Inspection Of All Components Of The System Including Electrical Control And Implementation Of Required Adjustment/s, Recommendation Of Repair/replacement Of Parts As May Be Necessary; 14. Check-up Of All Refrigerant Lines In The Air-conditioning System And Replenishment Of The Same, If Necessary; 15. Check-up And Repair Of Equipment Corrosion, Derust, Which Includes Preparation With Primer And Repainting Of Affected Parts; 16. Recommendation On The Repair And Replacement Of Unit And Parts That Should Be Undertaken And Submission Of Complete Item Specifications And Price Quotation That May Be Used As Reference (cost Of Labor And Materials) Within Two (2) Days Upon Detection Of Defects For The Internal Parts; And 17. Cleaning Of The Working Area And Cleaning Of The Site. 18. Submission Of Pms Report To Property & Supply Section For Every Conduct Of Pms. A Detailed Report May Be Requested For Further Explanation Of Any Findings During Preventive Maintenance. B. The Service Provider Shall Submit A Preventive Maintenance Report To Philracom, Through The Property And Supply Section. A Detailed Report May Be Requested By Philracom For Further Explanation Of Any Findings During Preventive Maintenance. C. The Service Provider Shall Also Provide Technical Support Services, Which Shall Include: 1. Availability Of Service Provider’s Technical Personnel Throughout The Period Of The Contract (24/7) And Their Official Contact Numbers I.e. Office Telephone And Mobile Phone Numbers, To Reply To All Queries On Various Issues, Requests Or Inquiries That Require Urgent Over-the-phone Support. 2. Technical Support In Situations That Require The Presence Of The Personnel Of The Service Provider At The Site As Urgently Needed To Perform Critical Activities Such As Check-ups, Troubleshooting, Minor Repairs, Assessing And/or Solving Problems Related To The Air-conditioning Unit/s. 3. Providing On-site Technical Support Within Twenty-four (24) Hours Upon Receipt Of The Request To Address Critical Issues Being Escalated By Philracom. 4. Submission Of Clear And Detailed Service Report, Including Findings And Recommendations, After Rendering On-site Technical Support. Vi. Duration Of Contract The Contract Duration Shall Be For A Period Of Twelve (12) Months From 01 April 2025 To 31 March 2026. Vii. Duties And Responsibilities Of The Service Provider A. The Service Provider Shall Conduct The Semi-annual Preventive Maintenance, Check-up And Related Minor Repairs According To Schedule To Ensure Reliable Operation Of The Air-conditioning Units During The Period Coverage. B. The Service Provider Shall Provide Qualified Technicians, Supervision, Tools And Equipment Necessary To Conduct The Regular Preventive Maintenance Check-up And Related Corrective Repairs. C. The Service Provider Shall Undertake Minor Adjustments And Repairs As Required In The Manufacturer’s Periodic Schedule. Labor And Supplies, At No Cost To Philracom. D. The Service Provider Shall Submit A Service Report To Philracom Or A Site Representative Upon Completion Of Work And Before Leaving The Site. Detailed Incident Report May Also Be Requested For Further Information Needed. E. In Case Of Major Repair, The Service Provider Will Submit A Quotation Of Materials And Spare Parts Needed, Including The Scope Of Work To Be Done (applicable Only If The Unit Is No Longer Under Warranty). F. The Service Provider Shall Dispatch The Technicians For A Request For Service Assistance, Which Must Be Done Within 24 Hours Upon Receipt Of The Complaint/report/request. G. The Service Provider Shall Designate A Head Office-based Personnel Who Will Be Responsible For Managing And Providing Administrative Support Services. 24/7 Support Thru Phone And Email, Including Regular Holidays, Special Holidays And Government-announced Holidays. On-call Support Services Must Also Be Provided In Situations That Require The Presence Of Personnel, As Urgently Needed To Perform Critical Activities. Response Time Is Within 4 Hours From Receipt Of The Call. Viii. Duties And Responsibilities Of Philracom A. The Philracom, Through The Supply And Property Management Unit, Shall Closely Monitor The Implementation Of The Preventive Maintenance Activity In Accordance With The Specifications And Conditions Of The Contract. B. During Each Scheduled Preventive Maintenance, An Authorized Representative Of Philracom Shall Be Available To Supervise The Procedures And Ensure That Office Properties, Such As Computers And Other Equipment Are Secured. Ix. Mode Of Procurement The Service Shall Be Undertaken Through Negotiated Procurement - Small Value Procurement, As Stated In Sec. 53.9 Of The Implementing Rules And Regulations Of Ra 9184 (government Procurement Reform Act) X. Payment A. Payment Shall Be Processed After Completion Of Every Scheduled Preventive Maintenance And Cleaning Of The Air-conditioning Units As Stated Above. B. Payment Shall Be Made Within Fifteen (15) Days After The Service Provider Submits A Billing Statement And Service Report, And The Supply And Property Management Unit Issues An Inspection And Acceptance Report. Xi. Penal Clauses A. Liquidated Damages If The Service Provider Fails To Deliver Any Or All Of The Goods And/or To Perform The Services Within The Period Specified In This Contract, The Procuring Entity (philracom) Shall, Without Prejudice To Its Other Remedies Under This Contract And Under The Applicable Law, Deduct From The Contract Price As Liquidated Damages, The Applicable Rate Of One-tenth (1/10) Of One Percent (1%) Of The Cost Of Unperformed Portion Of Every Day Of Delay. The Maximum Deduction Shall Be Ten Percent (10%) Of The Amount Of The Contract. Once The Maximum Is Reached, The Procuring Entity Reserves The Right To Rescind The Contract, Without Prejudice To Other Courses Of Action And Remedies Available To It Under The Law. The Damages Herein Provided Are Fixed And The Philracom Shall Not Be Required To Adduce Proof Thereof. B. Other Costs Should The Philracom Be Constrained To File A Suit To Obtain Relief Against The Service Provider, The Latter Shall Be Liable To Pay An Amount Equivalent To Twenty Percent (20%) Of The Amount Claimed In The Complaint As Attorney’s Fees, Aside From The Costs Of Litigation And Other Expenses, Which The Philracom Is Entitled To Recover From The Service Provider; Provided, However, That Any Action Brought By The Service Provider For Whatever Cause Arising From The Contract, Should It Be Adjudged Not To Be Entitled To The Relief Sought, The Philracom As The Prevailing Party Shall Be Entitled To Such Reasonable Attorney’s Fees, Costs Of Litigation And Other Costs It May Have Incurred By Reason Of Such Action. C. Indemnity The Service Provider Shall Defend, Indemnify, And Hold Harmless The Philracom Against All Claims, Losses, Liabilities, And Damages, And Pay All Claims, Judgments, Awards, Costs, And Expenses Arising Out Of Or In Connection With The Service Provider’s Acts Of Omissions, Unless Such Claims Are Due Solely To The Negligence Of The Philracom. Costs Inclusive Of Expert Witness Fees And Other Legal Expenses Shall Be Charged Against The Account Of The Service Provider. D. Other Costs The Service Provider Shall Not Be Liable For Failure Or Delay In Performing Obligations Set Forth In The Contract If Such Failure Or Delay Is Due To Any Cause Reasonably Beyond The Control Of The Service Provider. Xii. Right To Accept Or Reject Quotation And/or Annul The Procurement Process Philracom Reserves The Right To Accept Or Reject Any Quotation, To Annul The Procurement Process, Or Not To Award The Contract Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Xiii. Conformance With The Existing Laws The Procurement Process For This Undertaking Shall Be Executed In Accordance With Republic Act 9184, Otherwise Known As The Government Procurement Reform Act, And Its Revised Implementing Rules And Regulations.

Details: Description Item No. Unit Item Description Quantity 1 Pcs Albatros 29 2 Gal Alcohol 68%-72% 1 Gallon 5 3 Bottle Alcohol 68%-72% 500ml 3 4 Pcs Air Freshener Spray 13 5 Bottle Bleach 1l 33 6 Pcs Arch File 3 Inch Long 7 7 Pcs Ballpen (black) 691 8 Pcs Ballpen (blue) 167 9 Pcs Ballpen (red) 38 10 Pcs Ballpen (green) 3 11 Pack Battery Aa 4pcs/pack 34 12 Pack Battery Aaa 4pcs/pack 20 13 Pcs Big Stapler (heavy Duty) 6 14 Box Spring Clip 2inch 6 15 Pcs Binder Spring 2 Inches 15 16 Pcs Binder Spring 1.5 Inches 9 17 Pcs Binder Spring 1 Inch 9 18 Ream Binder Clips 19mm Box 11 19 Pcs Binder Clips 25mm Box 10 20 Pcs Binder Clips 32mm Box 10 21 Pcs Binder Clips 42mm Box 17 22 Box Bond Paper (a4) 214 23 Box Bond Paper (long) 205 24 Box Bond Paper (short) 133 25 Box Bond Paper (legal) 8.5x14 19 26 Ream Bond Paper (a3) 6 27 Ream Box Filer 20 28 Ream Broom 23 29 Pcs Broomstick 15 30 Pcs Broom And Dust Pan Set 4 31 Bottle Brother Black Btd60 8 32 Bottle Brother Cyan Bt5000 7 33 Bottle Brother Magenta Bt5000 10 34 Bottle Brother Yellow Bt5000 7 35 Bottle Brother T700w (black) 2 36 Bottle Brother T700w (yellow) 1 37 Bottle Brother T700w (cyan) 1 38 Bottle Brother T700w (magenta) 1 39 Bottle Brother D60 (black) 5 40 Bottle Brother 5000 (yellow) 2 41 Bottle Brother 5000 (magenta) 2 42 Bottle Brother 5000 (cyan) 2 43 Pack Carbon Paper (permafilm) 10’s 3 44 Set Cartolina (assorted) 10pcs/set 2 45 Pcs Calculator 14 46 Pcs Cleaner, Toilet And Urinal 12 47 Pcs Combo Strip 1 Inch 40 48 Pcs Combo Strips 1.5 Inches 25 49 Pcs Combo Strips 2 Inches 13 50 Set Plastic Rings Comb (8mm) 100’s 41 51 Set Plastic Rings Comb (10mm) 100’s 41 52 Set Plastic Rings Comb (12mm) 100’s 41 53 Set Plastic Rings Comb (14mm) 100’s 41 54 Set Plastic Rings Comb (16mm) 100’s 1 55 Pcs Computer Mouse Wireless 8 56 Pcs Computer Mouse With Wire 2 57 Pcs Computer Keyboard (usb) 5 58 Box Continuous Paper 11x14 Box 2 Ply 2 59 Box Continuous Paper 9 ¾ X 11 ¾ 4 60 Pcs Correction Pen 22 61 Pcs Correction Tape 97 62 Pcs Correction Fluid (brush Type) 63 Pcs Cutter Heavy Duty 3 64 Pcs Desk Organizer 10 65 Pcs Document Tray 2 Tiers 8 66 Pcs Document Tray 3 Tiers 8 67 Pcs Documents Storage Box (large) 10 68 Pcs Duct Tape 15 69 Pcs Dust Pan 15 70 Pack Electrical Tape (big) 24 71 Pcs Engineering Field Book 10 72 Bottle Epson Black T001 15 73 Bottle Epson Cyan T001 12 74 Bottle Epson Magenta T001 12 75 Bottle Epson Yellow T001 12 76 Bottle Epson Black T003 89 77 Bottle Epson Cyan T003 51 78 Bottle Epson Magenta T003 53 79 Bottle Epson Yellow T003 65 80 Bottle Epson Black 664 16 81 Bottle Epson Cyan 664 8 82 Bottle Epson Yellow 664 10 83 Bottle Epson Magenta 664 10 84 Bottle Epson Black 008 2 85 Bottle Epson Cyan 008 2 86 Bottle Epson Yellow 008 2 87 Pcs Envelope Brown Long 113 88 Pcs Envelope Brown Short 146 89 Pcs Envelope Orange 15 90 Pcs Envelope Transparent 15 91 Pcs Envelope White Mailing (long) 984 92 Pcs Expanded Envelope Long 167 93 Pcs Envelope With Handle And Lock Long Plastic 6 94 Pcs External Drive (ssd) 1tb 8 95 Boxes Face Mask 3 96 Pcs Feather Duster 7 97 Pcs Flourescent Tube Light Bulb 3 98 Pcs Brown Folder (long) 307 99 Pcs Brown Folder ( Short) 164 100 Pcs White Folder (long) 455 101 Pcs White Folder (short) 202 102 Pcs Expanded (long) 30 103 Dozen Fabric Conditioner (sachet) 70 104 Pcs Garbage Bin/trash Can 11 105 Packs Garbage Bag (m) 27 106 Packs Garbage Bag (xl) 38 107 Pcs Glue All Purpose 32 108 Pcs Highlighter Pen Blue 9 109 Pcs Highlighter Pen Orange 12 110 Pcs Highlighter Pen Pink 16 111 Pcs Highlighter Pen Violet 5 112 Pcs Highlighter Pen Yellow-green 47 113 Bottle Hp Ink Cartridge 690 (tricolor) 1 114 Bottle Hp Ink Cartridge 680 (black) 1 115 Ream Index Card (5x8) 25 116 Pcs Insecticide 2 117 Rolls Laminating Film 1 118 Pack Laminating Sheets (a4 Size) 3 119 Pcs Led Bulb 10 Watts 39 120 Pcs Led Bulb 15 Watts 17 121 Pcs Long Plastic Envelope With Handle And Lock 15 122 Gal Disinfectant 4 123 Bottle Disinfectant Spray 510g 9 124 Pcs Manila Paper 76 125 Pcs Micro Sd Card 128gb 3 126 Pcs Notebook (regular) 45 127 Ream Paper Payroll A3 2 128 Box Paper Clips (big) 30 129 Box Paper Clips (small) 59 130 Box Plastic Paper Fastener (long) 10 131 Box Plastic Paper Fastener (short) 22 132 Pcs Paper Cutter (b3) 1 133 Pcs Plastic Ring Comb 3 134 Ream Pvc Cover A4 5 135 Ream Pvc Cover Long 3 136 Ream Pvc Cover Short 1 137 Pcs Pen Holder 7 138 Pcs Pencil Lead With Eraser 125 139 Pcs Permanent Marker Fine (black) 61 140 Pcs Permanent Marker Fine (blue) 20 141 Pcs Permanent Marker Fine (red) 4 142 Pcs Permanent Marker Broad (black) 38 143 Pcs Whiteboard Marker (black) 42 144 Pcs Whiteboard Marker (blue) 7 145 Pcs Permanent Marker Refill Ink 2 146 Pcs Whiteboard Marker Refill Ink 2 147 Packs Photo Paper Long 12 148 Packs Photo Paper A4 7 149 Packs Plastic Key Tags 20 150 Pcs Puncher 14 151 Box Push Pin 19 152 Pcs Rain Coat 27 153 Pcs Rain Boots 1 154 Pcs Record Book 200 Leaves 35 155 Pcs Record Book 300 Leaves 11 156 Pcs Record Book 500 Leaves Medium 33 157 Pcs Record Book 500 Leaves Wide 25 158 Box Rubber Bond (big) 5 159 Pcs Rugs 32 160 Set Ruler (transparent) 12pcs/set 11 161 Pack Scissors 8” 33 162 Pcs Scissors Big 6 163 Pcs Sign Pen (black) 178 164 Pcs Pencil Sharpener 9 165 Pcs Pencil Sharpener Mounted 11 166 Sachet Detergent Powder 48 167 Pcs Detergent Bar 33 168 Pcs Dishwashing Soap 7 169 Pcs Dishwashing Paste 40 170 Pcs Dishwashing Liquid 2 171 Pcs Soap Hand (bar) Big 25 172 Pcs Soap Hand (bar) Regular 4 173 Pcs Soap Hand (bar) Small 12 174 Bottle Hand Washing Liquid 18 175 Packs Special Paper A4 120 Gsm 48 176 Packs Special Paper Long 120 Gsm 48 177 Packs Special Paper A4 200 Gsm 20 178 Packs Special Paper Short 200 Gsm 10 179 Packs Special Paper Long 200 Gsm 33 180 Pcs Stamp Pad No. 2 10 181 Pcs Stamp Pad Ink (violet) 7 182 Pcs Stamp Pad Ink ( Black) 1 183 Pcs Stamp Pad Ink (blue) 5 184 Pcs Staedtler Eraser 2 185 Pcs Stamp (received) 3 186 Pcs Stapler With Remover 20 187 Box Staple Wire #35 38 188 Box Staple Wire #35 Copper 33 189 Box Staple Remover (pinch Claw) 23 190 Pcs Staple Gun Tacker 2 191 Pcs Staple Gun Tucker Wire 3 192 Packs Sticker Paper Long 100s 29 193 Packs Sticker Paper Long 100s 29 194 Packs Sticky Notes 3x3 31 195 Packs Sticky Notes 3x2 26 196 Pcs Sticky Notes 3x4 25 197 Pcs Scotch Tape 1 Inch 65 198 Pcs Scotch Tape 2 Inch 19 199 Pcs Masking Tape 24mm 32 200 Pcs Masking Tape 48mm 47 201 Pcs Double Sided Tape 1” 38 202 Pcs Packaging Tape 48mm 24 203 Rolls Steel (10 Mtrs) 2 204 Box Tissue Paper 66 205 Pcs Facial Tissue 13 206 Pcs Table Name Plates 11 207 Pack Tape Dispenser 7 208 Pcs Transparent Index Tab 2 209 Pcs Tornado Mop (360) 15 210 Pcs Usb Flash Drive (32gb) 5 211 Pcs Usb Flash Drive (16gb) 3 212 Pcs Whiteboard Eraser 3 213 Pcs Wifi Adapter 3 214 Pcs Window Glass Cleaner 10 215 Pcs Glass Cleaner Spray 3 216 Pcs Wireless Keyboard And Mouse 3 217 Pcs Yellow Paper 15 218 Pcs Long Expanded Plastic Envelope 12 219 Pcs Pail (big) 3 220 Pcs Dipper (big) 4 221 Pcs White Board 1 222 Pcs External Drive (ssd) 2tb 1 223 Pcs Ups 2 224 Pcs Computer Mouse Usb W/ Wire 1 225 Pcs Pen Organizer 2 226 Pcs Steel Grinding Disc 4” 4 227 Kl Cwn 3” 5 228 Kl Cwn 4” 5 229 Kl Tie Wire 6 230 Gal Enamel Paint (black) 2 231 Gal Red Lead 2 232 Pcs Paint Brush 2” 5 233 Pcs Cutting Disc 6 234 Set Welding Gloves 1 235 Box Welding Rod 6011 1 236 Set Safety Gloves 15 237 Pcs Mop 8 238 Unit Comb Binding Machine 1 239 Pcs Drum Kit Mb760/mb770 2 240 Pcs Cover Pan With Broom 1 241 Pcs Date Stamp Received 1

Details: Description Republic Of The Philippines Department Of Health Caraga Regional Hospital Surigao City Ooooooooo @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Bids And Awards Committee Invitation To Bid Ib No. 2024-02-06 (124) Supply And Delivery Of One (1) Lot Of One (1) Unit Console-type Ultrasound Machine And One (1) Unit Of Portable Ultrasound Machine Approved Budget For The Contract: Php 21,500,000.00 ========================================================= 1. The Caraga Regional Hospital (crh), Through The Fy2024 Internally Generated Fund (igf) Intends To Apply The Sum Of Being The Approved Budget For The Contract (abc) Of Twenty One Million Five Hundred Thousand Pesos Only ( Php 21,500,000.00 ) As To Payment Under The Contract For Supply And Delivery Of One (1) Lot Of One (1) Unit Console-type Ultrasound Machine And One (1) Unit Of Portable Ultrasound Machine. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening And Items Below Are Subject For A Competitive Bidding As Framework Agreement List. This Is A Lot Bid. Item No. Description Qty Unit Of Measure Unit Cost Total Cost 1 One (1) Lot Of One (1) Unit Console-type Ultrasound Machine And One (1) Unit Of Portable Ultrasound Machine 1 Lot 21,500,000.00 21,500,000.00 Technical Specifications Of One (1) Unit Of Console-type Ultrasound Machine A. Main Equipment 1. Top-of-the-line 2. Capable Of Multi-line Signal, And Massive Parallel Image Processing With The Latest Software Of Receive Beam Former Technology 3. The System Should Be A Shared Service Ultrasound System With Built-in Multidisciplinary Applications And Also Equipped With The Following Key Technologies: A. Display Depth Of Up To 40 Cm B. 2d Shear Wave Elastography C. Fusion Imaging Capability D. Advanced Needle Visualization Enhancement With Needle Trajectory Display E. Fat Quantification F. 3d/4d Capable G. Color Doppler And Power Doppler Capable H. With Ai (artificial Intelligence) Technology Integration 4. Compact And Weighs No More Than 135 Kg Without Peripherals 5. Power Supply: 220v-240v Ac, 50/60 Hz As Applicable To The Mains Power Supply Of The Hospital 6. With Built-in Battery Backup 7. No Separate Volt Conversion 8. Power Consumption Must Be Clearly Stipulated 9. Mechanical Parts Should Be Heavy-duty Type 10. Equipment Should Be Maintainable And Serviceable With 24/7 Support, Preferably A Service Support Center Within The Visayas And Mindanao Areas. B. Ultrasound System Structure 1. Led Monitor Display Specifications: A. Display Size Of At Least 15 Inches B. Monitor Resolution Of At Least Full Hd (1920 X 1080) C. The Monitor Can Be Folded Down For Transport 2. Control Panel Specifications: A. Display Size At Least 15 Inches B. Aspect Ratio Must Be 16:9 C. Tilt Angle At Least 30 Degrees Up To 50 Degrees D. Left And Right Swivel At Least ± 45 Degrees Or Better E. Height Ranges From At Least 53 Inches To 67 Inches F. Adjustable Arms For A 180-degree Panel Rotation G. Emergency Central Brake And Swivel Lock H. Full-sized Backlit Keyboard I. Customizable Annotation J. Programmable Keys K. Segment Tg Control 3. Touch Screen Panel Specifications: A. At Least 13.3 Inches High Sensitivity Color Touch Screen B. A Resolution Of 1920 X 1080 C. Customizable/editable Buttons D. Tilt Angle At Least 30 To 60 Degrees E. Support Touchscreen Gestures 4. Transducer Management: A. Up To 6 Transducer Cup Holders Support Both Probes And Gel Bottle B. Connectors Must Be Compact-pin Less C. Must Have An Integral Gel Warmer With Temperature Control D. The Audio Speaker Must Be Integrated With The Control Panel E. Active Ports (4 Active And 1 Parking) 5. Transducers Specifications: A. Curved/convex Transducer I. Frequency Bandwidth At Least 1.0 Mhz Up To 6.0 Mhz (with Biopsy Needle Guide Attachments) Ii. Field Of View (fov) Of At Least 50 To 80 Degrees Iii. Maximum Depth Of At Least 40 Cm Iv. Application: Obstetrics, Gynecology, Abdomen, Small Parts, Musculoskeletal, Vascular, Urology, Nerve, Elastography, And Fat Quantification B. Linear Transducer I. Frequency Bandwidth At Least 4.0 Mhz Up To 14.0 Mhz Ii. Field Of View (fov) Of At Least 3.8 Cm To 6.0 Cm Iii. Application: Small Parts, Musculoskeletal, Vascular, Abdomen, Pediatric, Thoracic, & Elastography C. Micro-convex Transducer I. Frequency Bandwidth Of At Least 2.6 Mhz Up To 12.8 Mhz Ii. Field Of View (fov) Of 90 Degrees Iii. Application: Abdomen, Peripheral Vascular, Neonatal, Small Parts, And Urology D. Linear Transducer For Pediatric Applications I. Frequency Bandwidth Within The Range Of At Least 7.6 Mhz To 20.0 Mhz Ii. Field Of View (fov) At Least 2.86 Cm Iii. Application: Cranial, Musculoskeletal, Nerve, Small Anatomical Parts, And Vascular Applications E. Endo-cavity Transducer I. Frequency Bandwidth Within The Range Of At Least 2.9 Mhz To 8.1 Mhz Ii. Field Of View (fov) Of 176 Degrees Or More Iii. Application: Obstetrics, Gynecology, And Urology F. 3d/4d Transducer I. Frequency Bandwidth Of 3.0 Mhz To 11 Mhz Ii. Field Of View (fov) Of 170 Degrees Or More Iii. Application: Obstetrics, Gynecology, And General Abdomen 6. Imaging Parameters: A. B Mode B. M Mode C. Cine Captures Up To 300 Seconds D. Tissue Harmonic Imaging E. Color Doppler Imaging F. Power Doppler Imaging G. Anatomical M Mode H. Curved Anatomical M Mode 7. Advanced Features: A. Fusion Imaging B. Contrast Agent Imaging Or Contrast-enhanced Ultrasound (ceus) C. Color And Power Mode D. Automatic Tissue Equalizations E. Artifact Reduction Technology F. Real-time Panoramic Imaging G. Shear Wave Elastography (swe) H. Point Shear Wave Elastography I. Strain Elastography J. Fat Quantification Assessment 8. Data Storage And Transfer: A. Must Have A Separate Cpu (central Processing Unit) And Gpu (graphics Processing Unit) Processor. B. Dicom (digital Imaging And Communications In Medicine) Compatibility: Dicom 3.0 Standard, Connectivity Should Be Compatible With The Existing Pacs (picture Archiving And Communication System) Of The Hospital At No Extra Cost To The Purchaser In The Process Of Installation, Connection, And Integration Of The Equipment. C. A Storage Of At Least 120 Gigabytes Ssd (solid State Drive) For The Software Program And 1 Terabyte Hdd (hard Disk Drive) For The Dicom Data. D. Usb Ports Must Have At Least 2 To 5 Ports (at Least Two Ports Are Usb 3.0 And At Least One Is A Usb Type-c Port) For Importing And Exporting Protocols And Exams, Archiving, And Servicing. C. Accessories 1. One (1) Unit Of Uninterruptible Power Supply (ups) Of At Least A 3-hour Standby Power With Trolley/drawer And Caster Lock, Compatible With The Equipment Power Requirement And With Proper Grounding When Needed. Biopsy Needle Guide Attachments 2. At Least Two 32 Gb Storage Usb 3.0 Flash Drives For Exporting Images 3. One (1) Unit Computer Desktop Workstation With Medical Grade Monitor And One (1) Unit Heavy-duty Printer D. Consumables 1. At Least 10 Rolls Of Thermal Paper For Printing 2. Black And White (b/w) Digital Terminal Thermal Printer And Colored Printer For 3d/4d Images. 3. At Least 3 Gallons Of Ultrasonic Gel 4. At Least 5 Bottles Of A Cleansing Solution Cleaner For The Probes And The Cleansing Solution Should Not Cause Damage Or Membrane Swelling Of Transducer Probes When Used. 5. At Least 10 Pieces Of Skin Marking Pen Or Surgical Marking Pen For Interventional Studies Technical Specifications Of One (1) Unit Of Portable-type Or Lighweight Ultrasound Machine A. Main Equipment 1. Led Display Monitor Of At Least 15 Inches Or Better 2. Full Hd Or High-resolution Display Monitor Of At Least 1920 X 1080 Or Better 3. Preferably Lightweight Less Than 70 Kg With Cart And Other Peripherals 4. The Operating Console Can Be Detachable Or Non-detachable (fixed) From The Mobile Trolley Or Cart. 5. One (1) Pencil Probe Port Connected To A Transducer With A Probe Extend Module To Provide Three (3) Active Probe Ports At A Time 6. Programmable Keys For User-defined Functions 7. With 8-segment Time Gain Compensation (tgc) Control 8. Equipment Should Be Maintainable And Serviceable With 24/7 Support, Preferably A Service Support Center Within The Visayas And Mindanao Areas. B. Power Supply And Battery 1. Built-in Battery Of At Least 90 Minutes Or Higher When Used Continuously 2. Full Battery Should Last More Than 24 Hours When In Standby Mode 3. Power Supply: 220v-240v Ac, 50/60 Hz As Applicable To The Mains Power Supply Of The Hospital 4. No Separate Volt Conversion 5. Power Consumption Must Be Clearly Stipulated C. Applications And Software 1. Total Recall Imaging For Multi-modal Post-processing Capabilities On Archived Images Such As Measurements And Calculations 2. Needle Visualization Enhancement 3. Real-time Panoramic Imaging D. Mobile Cart 1. Material Type Of Mobile Cart: Magnesium Alloy With Locking Wheel 2. Gel Warmer And Probe Holder With At Least 5 Holders 3. Height Adjustment Up To 25 Cm 4. Maximum Weight With Peripherals At Least 40 Kg 5. Mechanical Parts Should Be Heavy-duty Type E. Transducers 1. Curvilinear Transducer A. Frequency Bandwidth: 1.4 Mhz To 5.0 Mhz B. Field Of View (fov) At Least 61 Degrees C. Depth Of At Least 40 Cm D. Application: Obstetrics, Gynecology, Abdomen, Small Parts, Musculoskeletal, Vascular, Urology, Nerve, Elastography, And Fat Quantification 2. Linear Transducer A. Frequency Bandwidth: 2.7 Mhz To 10.5 Mhz B. Field Of View (fov) Of At Least 3.4 Cm C. Depth Of At Least 35 Cm D. Application: Small Parts, Musculoskeletal, Vascular, Abdomen, Pediatric And Thoracic 3. Endo-cavity Transducer A. Frequency Bandwidth: 3.0 Mhz To 11.0 Mhz B. Radius: 1.1 Cm C. Application: Obstetrics, Gynecology, And Urology 4. Micro-convex Transducer A. Frequency Bandwidth Of At Least 2.6 Mhz Up To 12.8 Mhz B. Field Of View (fov) Of 90 Degrees C. Application: Abdomen, Peripheral Vascular, Neonatal, Small Parts, And Urology F. Imaging Features 1. High-resolution Color Doppler Imaging 2. Spatial Compound Imaging 3. Auto Optimization Button 4. Trapezoid Imaging And Extended Field Of View (fov) 5. Speckle Suppression Imaging 6. Supports Measurements And Calculations On Archived Exams And Images 7. Workstation Dedicated To Patient Exam Management G. Imaging Modes 1. B-mode 2. Tissue Harmonic Imaging 3. M-mode / Color M-mode 4. Anatomical M-mode 5. Curved Anatomical M-mode 6. Color Doppler Imaging 7. Power Doppler Imaging 8. Pulsed Wave Doppler 9. Continuous Wave Doppler 10. Panoramic Imaging H. Data Storage And Transfer 1. Storage Of At Least 240 Gigabytes Ssd (solid State Drive) Or Higher 2. Boot-up Time Must Be Less Than 30 Seconds 3. Boot-up Time From Standby Must Be Less Than 10 Seconds 4. Dicom (digital Imaging And Communications In Medicine) Compatibility: Dicom 3.0 Standard, Connectivity Should Be Compatible With The Existing Pacs (picture Archiving And Communication System) Of The Hospital At No Extra Cost To The Purchaser In The Process Of Installation, Connection, And Integration Of The Equipment. I. Accessories 1. One (1) Unit Of Uninterruptible Power Supply (ups) Of At Least A 3-hour Standby Power With Trolley/drawer And Caster Lock, Compatible With The Equipment Power Requirement And With Proper Grounding When Needed. 2. Must Have Three (3) Active Extended Probe Ports 3. Must Have One (1) Mobile Trolley With Drawer And One (1) Hard Case Luggage Bag 4. One (1) Unit Military Grade Laptop Computer Must Include One (1) Unit Of Host Military Laptop With The Following Specifications: A. Processor: Core I7 Or Equivalent In Other Brands. B. Ram: At Least 8 Gb C. Hard Drive: At Least 1 Tb Ssd D. Connectivity: Wi-fi, Bluetooth E. Ports: Usb, Usb-c, Hdmi, Network Extension For Ethernet/side Mechanical Docking, Headphone/microphone F. Durability: Mil-std 810g Tested G. At Least 14 Inches Monitor Display H. At Least 1 Mp Web Camera I. Battery Life Average Of At Least 13 Hours On Common (document/report Generation) Use, Should Include Adapter For Rapid Charging Up To 80% In 1 Hour. J. Should Be Installed With The Latest Licensed Os Compatible With The Base Unit To Ensure Communication. K. Should Be Installed With Licensed Applications/programs For Data Processing In Spreadsheet And Report Generation. L. To Include Optical Mouse (bluetooth And Rechargeable) M. Warranty On Parts And Service For At Least One (1) Year N. Laptop Should Include Carrying Bag. J. Consumables 1. At Least 10 Rolls Of Thermal Paper For Printing 2. B/w Digital Terminal Thermal Printer 3. At Least 3 Gallons Of Ultrasonic Gel 4. At Least 5 Bottles Of A Cleansing Solution Cleaner For The Probes And The Cleansing Solution Should Not Cause Damage Or Membrane Swelling Of Transducer Probes When Used. 5. At Least 10 Pieces Of Skin Marking Pen Or Surgical Marking Pen For Interventional Studies Other Terms Of Reference And Conditions 1. The Console-type And Portable-type Ultrasound Machines Should Be Of The Same Brand Or Manufacturer To Have The Same Service Maintenance Provider. 2. Must Have Three (3) Years Warranty For Parts And Services. 3. Certification From The Manufacturer A. That The Bidder Has The Capability For Corrective And Preventive Maintenance Of The Unit B. That The Bidder Has The Service Engineer(s) Trained And Capable Of Corrective And Preventive Maintenance For The Equipment Model. Service Engineer Should Be Presently Employed By The Bidder/supplier Or Authorized By The Manufacturer. C. Guaranteeing Delivery Of Equipment And All Accessories Within The Time Period Set By The Bids And Awards Committee (bac). D. Guaranteeing Of All Spare Parts For The Next Ten (10) Years Duly Authenticated By The Philippine Embassy In The Country Of Origin. E. That The Equipment Is A Brand-new Unit And Not A Discontinued Model. F. That The Terms And Conditions Stated In The Contract Shall Be Honored By The Manufacturer If A Change Of Exclusive Distributorship Will Occur During The Duration Of The Said Contract. 4. The Supplier’s Engineer Shall Perform Preventive Maintenance On The Machine During The Warranty Period Of At Least Quarterly. 5. The Supplier’s Engineer Must Provide The Complete Calibration Report Containing The Testing Parameters And Data Of Measurements Of The Ultrasound Machines To The Hospital’s Health/medical Physicist Before Clinical Acceptance. 6. The Bidder Must Provide A Certification Type Of Training On The Applications/operations, And Basic Maintenance For Users And Maintenance Personnel Of The Hospital. 7. Certificate Of Exclusive Distributorship From The Unit Manufacturer Mentioning The Name Of The Philippine Representative. 8. Certification From The Bidder Of 95% Uptime Guarantee For The Equipment Offered Within The Warranty Period. Accumulated Downtime In Excess Of 5% Shall Be Added To The Warranty Period. 9. The Bidder Must Submit The Original Brochure With Technical Specifications In English Language Both Hard And Soft Copy. 10. The Machine Should Conform To The International Electrotechnical Commission (iec) Standards Or Its Equivalent National Standard. The Bidder Must Provide Certificate Of Declaration Of Conformity. 11. Manufacturer/supplier Should Have Iso Certification For Quality Standards. 12. The Equipment Should Be A Us-fda Or Ce-approved Product. 13. Inventory Of Spare Parts For The Unit/model Offered Duly Signed By The Manufacturer. 14. Certification From The Foreign Ministry Of Health That The Company Can Sell The Product/model In That Country Of Origin. 15. The Bidder Shall Specify Post-warranty Comprehensive Preventive Maintenance Costs Including List And Price Of Major Spare Parts For The Next Three Years After Warranty. 16. Training Of End-users In Operation And Basic Maintenance Shall Be Provided 17. User, Technical, Operational, And Maintenance Manuals Are To Be Supplied In English Language. 18. All Services For Installation, Connection, And Integration Of The Machines To The Existing Pacs/ris Of The Hospital Shall Be Shouldered By The Bidder At No Additional Cost To The End Users. 19. Full Support To The Mid Staff Requiring Attendance To Technical, In-depth, Hands-on, And Extensive Face-to-face Training Programs Or Courses (such As But Not Limited To Elastography, Fat Quantification, And 3d/4d) Outside Of The Hospital Shall Be Made Available To The End User. 20. Full Support To The Mid Staff For Their Annual Continuing Medical/professional And Educational/learning Development While The Machines Are Under Warranty. 21. Must Have A Service Center Within The Caraga Region, Cebu City, Cagayan De Oro City, Or Davao City. 22. The Conduct Of Post-qualification Activity Shall Be At The Cost Of The Supplier And The Site Visit Shall Be Held At The Nearest Hospital. Failure To Comply With The Preferred Schedule Of The Procuring Entity For The Post Qualification Can Be A Ground For Disqualification. (no Extensions Allowed.) 23. The Delivery Of The Equipment Shall Commence Within Ninety (90) Calendar Days From Receipt Of The Notice To Proceed. To Be Delivered At Caraga Regional Hospital, Rizal Street, Brgy. Washington, Surigao City, Surigao Del Norte. Technical Specification And Terms Of Reference Are Hereby Posted In Philgeps And Form An Integral Part Of This Invitation To Bid. 2. The Crh Now Invites Bids For The Procurement Of The Above-captioned Project. Delivery Of The Goods Is Required Within The Period Specified Under Section Vi (schedule Of Requirements). Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. Section 23.4.1.3.(ra 9184). The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. Slcc Must Be Within 2 Years From The Submission Of Bids. (based On The Completion Date). The Single Largest Completed Contract (slcc) Shall Be The Same Or Similar In Nature, As Determined And Defined By The Bids And Awards Committee ( Bac ). For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: A. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And B. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Nondiscretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee (bac) Secretariat, Caraga Regional Hospital, Surigao City And Inspect The Bidding Documents At The Address Given Above During 8:00 Am – 5:00 Pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 28, 2024 To February 06, 2025 On Or Before 10:00 A.m. From The Address Above And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Specified Below: Bidding Schedule Pre-bidding Conference January 16, 2025 At 9:00 A.m. Via Zoom Platform Link: Join Zoom Meeting Https://us06web.zoom.us/j/84427775771?pwd=3ljykccird98psr6rpzotkfaaug2il.1 Meeting Id: 844 2777 5771 Passcode: 947752 Deadline Of Submission Of Bids February 06, 2025 At 10:00 A.m... Via Online And Submit Your Bidding Documents To This Email Address: Crhbac2020@gmail.com. Please Be Advised That Failure To Submit Bidding Documents To The Designated Official Email Address Will Result In Automatic Rejection And Disqualification. Opening Of Bids February 06, 2025 At 2:00 P.m. Via Zoom Platform Link: Join Zoom Meeting Https://us06web.zoom.us/j/89960742667?pwd=szuuabrns2l0zbey780rlzpinl9ynw.1 Meeting Id: 899 6074 2667 Passcode: 984011 Complete Philippine Bidding Documents Please Click The Link Below For The Complete Pbd: Https://drive.google.com/drive/folders/1-bugnrw-ewejdoqlxztwwuw89zqwnt3x?usp=sharing Bidding Documents Php 25,000.00 It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Following Phlippine Bidding Documents Can Be Accessed In The Philgeps And All Form And Part Of This Invitation To Bid, To Wit: A. Technical Specification / Terms Of Reference/ List Of Items B. Instruction To Bidders: B.1. Documents To Be Submitted (checklist- This Will Be Discussed During The Pre-bid Conference) B.2. Memorandum Of Undertaking – Provision Thereof Is Strictly Implemented C. Guidelines On The Conduct Of The Electronic Submission And Receipt Of Bids By The Procuring Entity – Caraga Regional Hospital (crh) D. Philippine Bidding Documents 6. The Crh Will Hold A Pre-bid Conference On The Above-mentioned Date, Time And Venue, Which Shall Be Opened To Prospective Bidders. The Pre-bidding Conference And Opening Of Bids Shall Be Conducted Through Videoconferencing, Webinar Or Virtual. Please Send Your Intent To Participate To Our Email Address As Provided Below. 7. Bids Must Be Duly Received By The Bac Secretariat At Via Designated Email On Or Before February 06, 2025 At 10:00 O’clock In The Morning. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On February 06, 2025 At 2:00 O’clock In The Afternoon At The Bac Conference Room, Beside Procurement Office, Caraga Regional Hospital, Rizal Street, Surigao City As Virtual / Electronic Bidding Via Zoom Platform. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above. Late Bids Shall Not Be Accepted Under Any Circumstances May It Cause. 8. Furthermore, The Standard Philippine Bidding Document (pbd) Is Form And Part Of This Invitation In Accordance To Ra 9184 And Other Applicable Laws, Rules And Policy. 9. The Crh Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. The Opening And Receipt Of Bids Is Strictly Implemented Through Electronic Submission. Given The Covid-19 Pandemic, Procurement Activity Has Been Expedient And One Of This Is The Conduct Of Electronic Submission Of Bids. The Crh Thru The Bids And Awards Committee (bac) Has Submitted Certification, Certified By The Highest Official Managing The Information Technology, Describing The Electronic System Or Procedure To Be Used By The Crh For The Electronic Submission And Receipts Of Bids And A Statement That The Same Is Compliant With The Gppb Resolution No. 12-2020 Requirements. 11. Bidding Documents Shall Be Emailed To This Email Address, With Activated Password To: Crhbac2020@gmail.com. You May Deposit On Line For The Payment Of The Bidding Documents To This Account Below: Bank Name: Land Bank Of The Philippines Account Name: Caraga Regional Hospital-trust Fund Account Number: 0982 -1288 – 70 12. Furthermore Deposit Slip Shall Be Submitted Via Email To: Crhprocurement.bac@gmail.com 13. The Procuring Entity Will No Longer Accept Nor Entertain Any Form Of Bids Submission Except Electronic. Failure To Comply Electronic Submission Will Be Immediately Disqualified. Guideline On The Electronic Submission Is Hereby Attached. 14. Join The Caraga Regional Hospital Supplier Network By Filling Out The Registry Form From This Link : Https://bit.ly/crh_suppliersregistry 15. For Further Information, Please Inquire To: Bac Secretariat Caraga Regional Hospital. Rizal Street, Surigao City Tel. Nos. (086) 826-1575 Local 194 (086) 826-9058 Mobile Nos: Globe: 0953-9212-832 / Smart: 0985-0508-783 E-mail Address: Crhprocurement.bac@gmail.com Fb Page: Caraga Regional Hospital – Bids And Awards Committee Approved By: (sgd) Fermarie C. Dulpina, Rmt, Mpa, Jd Chief Health Program Officer Chairman, Bids And Awards Committee

Details: Description Invitation To Bid For Supply & Delivery Of Construction Materials For San Jose Cis The National Irrigation Administration – Regional Office Ix Bac, Through The Cy 2025 National Expenditure Program (nep) For General Appropriation Act (gaa) 2025 Fund, Invites Contractors To Submit Bids For The Following Contract: Contract Reference No. : Niar9-epa-restocis2025-017 (goods) Project Name : San Jose Cis Contract Location : Dipolog City, Zamboanga Del Norte Scope Of Works : Supply & Delivery Of Construction Materials Approved Budget For The Contract (abc) : Php 3,097,845.33 Contract Duration : 60 Calendar Days Amount Of Bidding Documents : Php 5,000.00 The Nia – Ro9 Bac Is Conducting An Early Procurement Activity (epa) On Public Bidding For This Contract In Accordance With Republic Act 9184, Otherwise Known As The “government Procurement Reform Act” And Its Revised Implementing Rules And Regulations (rirr). To Be Eligible To Bid For The Above-stated Contract, A Contractor Must Meet The Following Major Requirements: (a) Filipino Citizen Or 60% Filipino-owned Partnership/corporation; (b) Completion Of A Similar Contract Costing At Least 25% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To Abc. Interested Bidders Are Required To Submit Two (2) Valid Ids Of The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc. Updated Company Profile Shall Also Be Submitted And Presented To The Nia-r9 Bac Secretariat Upon Purchased Of The Bidding Documents. Credit Line Commitment Shall No Longer Be Accepted As An Alternative To The Prospective Bidder’s Computation Of Nfcc Per Gppb Resolution No. 20-2013 Dated July 30, 2013. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion In The Eligibility Check, Preliminary Evaluation Of Bids, Post Qualification, And Award. The Significant Times And Deadlines Of Procurement Activities Are Shown Below: Issuance Of Bidding Documents : December 21, 2024 – January 20, 2025 At 8:30 Am Pre-bid Conference : January 8, 2025 At 9:00 Am Submission Of Bids : January 20, 2025 At 8:30 Am Opening Of Bids : January 20, 2025 At 9:00 Am Interested Bidders May Obtain Further Information From Nia – Ro9 Bac And Inspect The Bidding Documents At The Address Given Below Starting December 21, 2024 – January 20, 2025. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents Prescribed In The Above-mentioned List Of Projects. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Only The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc Shall Be Authorized To Purchase And Submit Bidding Documents. The Use Of Special Power Of Attorney (spa) Is Prohibited As Per Nia Memorandum Circular No.52 Series 2014 Dated December 1, 2014. The Nia – Ro9 Bac Will Hold A Pre-bid Conference On 08 January 2025 At 9:00 Am At Conference Room, National Irrigation Administration – Regional Office Ix, Regional Center, Balintawak, Pagadian City, Which Shall Be Open To All Interested Parties. Bids Must Be Duly Received By The Bac Secretariat Thru Manual Submission At The Office Address As Indicated Below On Or Before 20 January 2025 At 08:30 Am. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb. Clause 18.1. Bids Will Be Opened In The Presence Of The Bidder’s Authorized Managing Officer Or Authorized Liaison Officer Of Interested Parties At The Address Below Prospective Bidders Shall Submit Their Sealed Envelopes Together With The Duly Accomplished Forms As Provided In The Bd’s On Or Before The Deadline Of Dropping Of The Bid Documents At The Nia – Ro9 Bac By The Authorized Managing Officer (amo) Or Authorized Liaison Officer Indicated In The Submitted Company Profile/crc Of The Parties. The Liaison Officer Shall Submit A Letter From The Amo Authorizing Her/him To Drop Their Bid, Attend The Bidding Process And Also Submit A Copy Of Company I.d. For Verification. No Special Power Of Attorney (spa) Shall Be Allowed. The Procuring Entity Shall Not Be Held Responsible Of Any And All Bid Documents/proposals Losses. All Interested Contractors/bidders Must Inform The Bac Chairperson Thru Its Secretariat Of Their Documents Submitted In Any Means Provided Above Before The Date Of The Bid Opening To Avoid Late Submission. The Nia – Ro9 Bac Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders, In Accordance With The Provisions Of Section 41 Of Ra 9184 And Its Irr. Pursuant To Nia Memorandum Circular No. 119 S. 2020, Subject: Policy On Utilization Of Videoconferencing, Webcasting Or Similar Technology In The Conduct Of Public Procurement Activities, Procurement Proceedings For The Above Mention Contracts Will Be Held Through Face-to-face Meeting In Combination With Video Conferencing Using Google Meet Thru The Links: Pre-bidding Conference : Https://meet.google.com/juh-znyf-mbg Opening Of Bids : Https://meet.google.com/kwm-bvjs-ems Item No. Description Quantity Unit Total Delivered, Weeks/months 1 10mm Ø Rsb 602.00 Pcs 602.00 1st Month 2 Common Tei Wire (ctw) #16 25.00 Kg 25.00 1st Month 3 Portland Cement (40kg/bag) 300.00 Bags 525.00 1st Month 225.00 2nd Month 4 Find Aggregates 28.00 Cu.m. 28.00 1st Month 5 Coarse Aggregates 3/4'' 58.00 Cu.m. 58.00 1st Month 6 Coco Lumber 1,425.00 Bd.ft 1,425.00 1st Month 7 1/2'' Marine Plywood 72.00 Sheets 72.00 1st Month 8 Common Wire Nails (cwn) #2 38.00 Kg 38.00 1st Month 9 Common Wire Nails (cwn) #3 76.00 Kg 76.00 1st Month 10 Latex Paint Primer 28.00 Ltrs 28.00 1st Month 11 Gloss Latex Paint Assorted Colors 56.00 Ltrs 56.00 1st Month 12 Enamel Paint 5.00 Ltrs 5.00 1st Month 13 Paint Thinner 0.25 Gal 0.25 1st Month 14 Skim Coat (25kg/bags) 25.00 Bags 25.00 2nd Month 15 Paint Tray 3.00 Pcs 3.00 2nd Month 16 Paint Roller With Handle # 9" 5.00 Pcs 5.00 2nd Month 17 Paint Brush #4 5.00 Pcs 5.00 2nd Month 18 Paint Brush #2 3.00 Pcs 3.00 2nd Month 19 Paint Brush #1/2 3.00 Pcs 3.00 2nd Month 20 Cctv Camera, Hd Dvr (4 Channel), Hd Camera 4 Pcs (2.0mega Pixel) Free Wire Per Camera (20meters), 19 Inches Monetor Aoc And 1tb Hdd Storage & Complete Accessories 1.00 Set 1.00 1st Month 21 Bnc Male/female 1.00 Pcs 1.00 1st Month 22 Power Supply 1.00 Pcs 1.00 1st Month 23 Ups 650va 1.00 Pcs 1.00 1st Month 24 Avr 1.00 Pcs 1.00 1st Month 25 Junction Box 4.00 Pcs 4.00 1st Month 26 Co-axial Wire 250.00 M 250.00 1st Month 27 G.i. Pipe:'50mm Dia. X 6m Length (schedule 40) 22.00 Pcs 22.00 1st Month 28 Inter-linked: 'hot Dip Zinc Galvanize Inter-linked, D: 5ftx10m, Hole Size: 5cm X 5cm, Wire Diameter: 3.3mm) 4.00 Roll 4.00 1st Month 29 Galvanize Barbed: 'wire 30cm Dia. 3.00 Roll 3.00 1st Month 30 Welding Rod #3016 25.00 Kg 25.00 1st Month 31 Cutt-off Wheel: '4" Cutt-off Wheel 5.00 Pcs 5.00 1st Month 32 Disk;'4" Grinding Disk 2.00 Pcs 2.00 1st Month 33 Cylindrical Hinge Heavy Duty: 4" 6.00 Pcs 6.00 1st Month 34 6"ø X 6m Upvc Blue Pipes W/ Complete Accessories 170.00 Pcs 271.00 1st Month 101.00 2nd Month 35 6"ø Upvc Blue Pipes Elbow 45˚w/ Accessories 5.00 Pcs 5.00 1st Month 36 6"ø Upvc Blue Pipes Elbow 90˚ W/ Accessories 11.00 Pcs 11.00 1st Month 37 Pipe Cement Solvent 200cc 20.00 Can 20.00 1st Month 38 3"ø X 6m Upvc Blue Pipes W/ Complete Accessories 100.00 Pcs 167.00 1st Month 67.00 2nd Month 39 3"ø Upvc Blue Pipes Elbow 45˚w/ Accessories 5.00 Pcs 5.00 1st Month 40 3"ø Upvc Blue Pipes Elbow 90˚ W/ Accessories 5.00 Pcs 5.00 1st Month 41 6'' Ø Flange Type Gate Valve 5.00 Pcs 5.00 1st Month 42 20 Mm Ø X 4'' Bolt & Washer 96.00 Set 96.00 1st Month 43 Conventional Boot Wall Opening 8.00 Pcs 8.00 1st Month 44 6'' Ø Ductile Iron Restrain Flange Connector 8.00 Unit 8.00 1st Month 45 6'' Ø Flange Type Ductile Iron Tee 2.00 Unit 2.00 1st Month 46 6''ø To 2''ø Pe Compression Saddle Clamp 2.00 Pcs 2.00 1st Month 47 2'' Ø Hdpe Pipe 6.00 M 6.00 1st Month 48 90 ̊ 2'' Ø Hdpe Compression Elbow 12.00 Pcs 12.00 1st Month 49 2'' Ø Hdpe Compression Tee 2.00 Pcs 2.00 1st Month 50 Hdpe Tee Reducer (2'' Ø To 0.50'' Ø) 4.00 Pcs 4.00 1st Month 51 90 ̊ 1/2'' Ø Gi Elbow 8.00 Pcs 8.00 1st Month 52 1/2'' Ø Gate Valve 8.00 Pcs 8.00 1st Month 53 1/2'' Ø Pipe Nipple (150cm L) 8.00 Pcs 8.00 1st Month 54 1/2'' Ø Polyethylene 400.00 M 800.00 1st Month 400.00 2nd Month 55 2''x2''x0.25''x 6m L Bar 2.00 Pcs 2.00 1st Month 56 2''x0.25''x6m Flat Bar 1.00 Pcs 1.00 1st Month 57 0.045'' Diamond Plate Steel Iron 2.00 Sheets 2.00 1st Month 58 4'' Heavy Duty Metal Hinge 9.00 Pcs 9.00 1st Month 59 Plastic Canvass 100.00 M 100.00 1st Month 60 Nylon #100 2.00 Kg 2.00 1st Month 61 Rubber Boots 30.00 Pair 30.00 1st Month 62 Working Gloves 30.00 Pair 30.00 1st Month 63 Safety Helmet/hard Hat 30.00 Pcs 30.00 1st Month