United States Tenders

Proposed Procurement For Nsn 5995016751413 Cable Assembly,spec: line 0001 Qty 468 Ui Ft Deliver To: By: 0251 Days Ado this Solicitation May Result In An Automated Idc (indefinite Delivery Contract). The Term Of The Contract/order Will Be One Year Or Until The Aggregate Total Of Orders Placed Against The Contract/order Reach 250000.00. The Estimated Number Of Orders Per Year Is 3. The Guaranteed Minimum Quantity Will Be 70. Items Will Be Shipped To Various Conus And Oconus (via Consolidation And Containerization Point) Dla Depots. approved Source Is 06090 Epd-rwc-18522-l155. the Solicitation Is An Rfq And Will Be Available At The Link Provided In This Notice. Hard Copies Of This Solicitation Are Not Available. Specifications, Plans, Or Drawings Are Not Available. all Responsible Sources May Submit A Quote Which, If Timely Received, Shall Be Considered. quotes Must Be Submitted Electronically.

This Announcement Constitutes A Sources Sought Synopsis (market Survey). This Is Not A Request For Quote (rfq) Or A Request For Proposal (rfp). This Announcement Is For Information And Planning Purposes Only And Is Not To Be Construed As A Commitment By The Government, Implied Or Otherwise, To Issue A Solicitation Or Award A Contract. The U.s. Army Corps Of Engineers, Walla Walla District, Is Seeking Small Business Sources For A Service Requirement Entitled: "juvenile Fish Barge Transport Program" For Award Of A Base Contract Plus Two Option Years. this Is Scheduled To Be Issued As A Firm Fixed Price Service Contract With Economic Price Adjustment For Marine Fuel Used In Government Owned Barges. The Purpose Of This Sources Sought Is To Determine Interest And Capability Of Potential Qualified Small Business, 8(a) Small Businesses, Historically Underutilized Business Zone (hubzone) Small Businesses And Service-disabled Veteran Owned Small Businesses (sdvosbs) Relative To The North American Industry Classification Code (naics) 483211. The Small Business Size Standard For This Naics Code Is 1050 Employees. To Make An Appropriate Acquisition Decision For This Project, The Government May Use Responses To This Sources Sought Synopsis. The Type Of Solicitation Issued, And The Manner Of Advertisement May Depend On The Responses To This Sources Sought Synopsis. submission Requirements For Responses To This Sources Sought Synopsis: (1) Your Intent To Submit A Proposal For This Project When It Is Formally Advertised. (2) Name Of Firm With Address, Phone And Point Of Contact. (3) Cage Code, Uei Number Or A Copy Of Your System For Award Management (sam) Information. (4) The Category Of Small Business, Such As 8(a), Hubzone, Or Sdvosb. (5) Statement Of Capability (soc) Stating Your Skills, Experience, Knowledge, And Equipment Required To Perform The Specified Type Of Work. This Should Include Documentation Of Past Specialized Experience And Technical Competence In Similar Work, Up To Three (3) Past Projects For Which Your Firm Was The Prime Contractor. The Soc Should Be No More Than Three Pages In Length. firms Responding To This Sources Sought Synopsis, Who Fail To Provide All The Required Information Requested, Will Not Be Used To Assist The Government In The Acquisition Decision, Which Is The Intent Of This Sources Sought Synopsis. note: If You Do Not Intend To Submit A Proposal For This Project When It Is Formally Advertised, Please Do Not Submit A Response To This Sources Sought Synopsis. if Inadequate Responses Are Received, This Solicitation May Be Issued For Full And Open Competition. please Send Your Response To U.s. Army Corps Of Engineers, 201 North Third Avenue Attn: Contracting/melita Doyle, Walla Walla, Wa 99362 Phone: (509) 527-7207 E-mail: Melita.s.doyle@usace.army.mil. Response Deadline: August 28, 2024, At 3:00 P.m. (pacific Time Zone). statement Of Work: place Of Performance: Work Will Be Performed In The Area Between Lower Granite Reservoir (near Lewiston, Id) And On The Columbia River (near Portland, Or). Description Of The Requirement: Provide Four Towboats, Each Staffed With Crews For 24-hour Per Day Operation, To Transport Government-owned Fish Barges From Lower Granite Juvenile Fish Facility To Fish Release Areas Below Bonneville Dam. Stops Will Be Made At Little Goose And Lower Monumental Dams To Load Additional Fish Or To Pick Up An Additional Fish Barge For Transport To The Release Site. The Initiation Of Barging Operations Is Based On Runoff Projections. Barging Of Fish May Begin As Early As 21 April During Low Flow Or Drought Years And As Late As May 2 During Years When Runoff Is Forecasted To Be Near Or Above Normal Or Average Runoff And Could Last Through August 14 Or 15 But Could End As Early As June 20 Depending On Fish Collection Numbers Or As Coordinated With Regional Fish Managers. Transporting Of Fish By Barge From Snake River Dams Will Therefore Begin Sometime Between April 21 And May 2, As Directed By The Contracting Officer Or Contracting Officer's Representative, And Last Up To Mid-august But Typically Ends Earlier On June 20. Transport Barges Will Depart From Fish Loading Facilities Daily Or On Alternate Days, Depending On Fish Abundances. In Recent Years, Transport Has Been Daily At The Start Of The Season And Transitioned To Occurring On Alternate Days Mid-season. Barge Transportation Will Not Exceed 76 Trips. In Addition, 1 Barge Trip Will Take Place During The Month Of April In Support Of Fish Research.

Allen Bradley Contactors ( No Substitutes)

Contact Information|4|n744.25|gdn|717605570|holly.tibbens@navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| higher-level Contract Quality Requirement (navicp Review Feb 1991)(feb 1999)|1|mil-i-45208| inspection Of Supplies--fixed-price (aug 1996)|2||| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving (combo Reports)|na|tbd|tbd|tbd|tbd|tbd|tbd|na|na|tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|navsup Wss| equal Opportunity (sep 2016)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| alternate A, Annual Representations And Certifications (nov 2023)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (may 2024)|13|332991|1250|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| 1. This Solicitation Is For The Procurement Of 79 Each Nsn 3hd 3110 09873730 Nt. Please Provide A Firm Fixed Unit Price That Incorporates All Of The Associated Costs To Manufacture, Testing, Packaging, Inspection, And Shipment Of This Item. 2. Government-source Inspection And Acceptance (g-s I&a) Is Required. If The G-s I&a Will Occur At A Different Cage From The Award Cage, Please Provide The Facility And/or Packaging Cages With The Quote. 3. This Part Requires Engineering Source Approval By The Design Control Activity In Order To Maintain The Quality Of The Part. Existing Unique Design Capability, Engineering Skills, And Manufacturing Knowledge By The Qualified Source(s) Require Acquisition Of the Part From The Approved Source(s). The Approved Source(s) Retain Data Rights, Manufacturing Knowledge, Or Technical Data That Are Not Economically Available To The Government, And The Data Or Knowledge Is Essential To Maintaining The Quality Of The Part. An alternate Source Must Qualify In Accordance With The Design Control Activity's Procedures, As Approved By The Cognizant Government Engineering Activity. The Qualification Procedures Must Be Approved By The Government Engineering Activity Having Jurisdiction Over the Part In The Intended Application. 4. Mil-std Packaging Is Required And It Will Not Be Waived. 5. Please Provide The Following Information In The Procurement Quote: A. Your Cage (used As The Awardee Cage):___________________ B. The Unit Procurement Price: $____________________________________ C. Procurement Turn-around Time (number Of Days From Date Of Award To Shipment Of Manufactured Unit(s):_______days D. The Manufacturing Cage _____________ And Packaging Cage___________ (as Described In #2). 6. Please Note: We Are Requesting That The Quote's Validity Extend For 6 Months From The Proposal Submission Date. 7. Please Submit A Procurement Quote To Holly Tibbens Via Email: Holly.tibbens@navy.mil. This Is The Only Submission Method Authorized. All Other Delivery Methods (i.e., Fax, Neco, Etc.) Will Not Be Accepted. 8. Please Read This Solicitation In Its Entirety. Direct Questions Regarding This Solicitation To The Person Listed Above (#7). 9. The Government Does Not Own The Drawings Or Data Rights To This Item. Therefore, We Will Not Be Able To Provide Drawings Or Technical Specifications For This Nsn. 10. Limited Competition Exists Between Three Large Business Sources, Therefore, Sbsa Is Not Feasible For This Requirement. The Small Business Set-aside Requirement Has Been Dissolved.10. Please Review The Attached Dd1423. 11. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractor's Written Acceptance Prior To Execution. 12. This Order Requires A Higher Level Inspection. 13. The Iwst Determined That All Niins For This Requirement Are Covered By The 30 July 2018 Class Determination And Findings (d&f) For The Use Of Emergency Acquisition Flexibilities (eaf). \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The Bearing,ball,annula . 1.1.1 ;required Item Is To Be Procured And Adhere To Mil-b-17931 Military Specification For 'bearings, Ball, Annular, For Quiet Operation' And Other Applicable Documents Referenced Herein.; 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 2.1.2 The "document Changes" Section Provides Supersessions/changes To Referenced Documents. 2.2 Order Of Precedence - In The Event Of A Conflict Between The Text Of This Contract/purchase Order And The References And/or Drawings Cited Herein, The Text Of This Contract/purchase Order Shall Take Precedence. Nothing In This Contract/purchase Order, however, Shall Supersede Applicable Laws And Regulations Unless A Specific Exemption Has Been Obtained. document Ref Data=mil-std-12 | | |d |810529|a| | | document Ref Data=mil-std-105 | | |e |950227|a| | | document Ref Data=mil-std-129 | | |p |041029|a| |03| document Ref Data=ff-b-171 | | |b |950309|a| 1| |1 | |53 |920303 document Ref Data=sae J418 | | |a |831201|a| | | document Ref Data=mil-b-1083 | | |d |970530|a| | |1 document Ref Data=ams 6444 | | |h |911001|a| | | document Ref Data=ansi/afbma Std 9 | | | |900717|a| | | document Ref Data=mil-b-17931 | | |e |950522|a| 2| | document Ref Data=dod-g-24508 | | |a |980923|a| 4| | document Ref Data=mil-i-45208 | | |a |961001|a|2 | | document Ref Data=sae 52100 | | | | |a| | | document Ref Data=ansi/afbma Stb 20 | | | |871028|a| | | document Ref Data=ansi/afbma Std 10 | | | |890605|a| | | document Ref Data=ansi/afbma Std 13 | | | |870902|a| | | document Ref Data=astm-e112 | | | |881109|a| | | document Ref Data=mil-prf-17331 | | |j |070330|a| 1| | |y|97 |940720 document Ref Data=astm-e18 | | | |930215|a| | | document Ref Data=astm-a295 | | |92 |920815|a| | | document Ref Data=astm-e45 | | | |870828|a| | | document Ref Data=mil-prf-6085 | | |d |980220|a| | | |y|14 |920916 document Ref Data=iso9001 | | | |010417|a| | | document Ref Data=mil-std-973 | | | |920417|a| | | document Ref Data=mil-std-973 | | | |950113|a| |03| document Change Data=mil-l-17331 |mil-prf-17331 document Change Data=mil-l-6085 |mil-prf-6085 3. Requirements 3.1 ;source Control Item - Previous Delivery Of This Specified National Stock Number Or Similar Item Manufactured To Technical Procurement Specifications And Mil-b-17931 Supplied By A Government Activity Or Price Contractor Does Not In Itself Qualify A supplier As A Government Approved Source. Only Those Sources For This Item Currently Approved By The Government Will Be Considered For This Award. The Time Required For Approval Of A New Supplier Is Normally Such That Award Cannot Be Delayed Pending Approval Of The New Source. Qualification And Testing Requirements Are Extensive And Time Consuming. To Maintain Appropriate Stock Levels And Prevent work Stoppage, A Prospective Contractor Must Be Determined To Be Qualified By The Engineering Activity Prior To Submitting Offer. If You Have Not Been Solicited And You Can Furnish Either (a) Proof Of Your Prior Approval As A Supplier Of This Item, Or (b) Data Showing You Have Produced The Same Or Similar Items Satisfactorily For The Government Or A Commercial Source, Or (c) test Data Indicating Your Product Can Meet Service Operating Requirements, Or (d) Other Pertinent Data Concerning Your Qualification To Produce The Required Item, Notify The Procurement Contracting Officer In Writing, Furnishing Said Proof Of Data for Evaluation, Possibly Leading To Your Firm Being Authorized As An Approved Source For This Procurement Or Subsequent Procurements. Your Interest Will Be Forwarded To The In-service Engineering Agent (isea) Responsible For This Item.; 3.1.1 ;qtp-mil-b-17931 Shall Be Used To Qualify A Vendor To Supply Precision Ball Bearings For Low Noise Operation In Accordance With Mil-b-17931 Rev E. After Final Approval Is Granted By Navsea, The Vendor Will Be Considered A Qualified Source To Supply noise-tested (nt) Bearings In Accordance With Mil-b-17931 And Associated Documents.; 3.2 Manufacture And Design - The Bearing,ball,annula Furnished Under This Contract/purchase Order Shall Meet The Requirements As Specified In ;mil-b-17931e; . The Ordering Data/acquisition Requirements/notes Are ;as Follows: a. Standard Part Number M17931-g046. b. See Appendix I Thru Iv And Attachment A Thru D (spcc Form 4250/7) For Modifications To Mil-b-17931e. c. See Acn-mil-b-17931 (navsea 9244, Ser 05z/014) For Acceptable Modification To Mil-b-17931e. d. See Qtp-mil-b-17931 For Acceptable Modification To Mil-b-17931e.; . 3.3 Marking - This Assembly And Its Piece Parts Shall Be Physically Identified In Accordance With ;paragraph 3.7 Of Mil-b-17931e And Mil-std 129.; . 3.4 ;quality Conformance Inspection / Test (contractor Testing) - Quality Conformance Inspection And Approval Is Required.; 3.5 ;production Lot Test / Verification Inspection (government Testing) - Verification Inspection And Approval Is Required.; 3.6 Configuration Control - Mil-std-973 Entitled "configuration Management", Paragraph 5.4.8, Configuration Control (short Form Procedure), Is Hereby Incorporated. The Contractor Shall Submit All Engineering Change Proposals In Accordance With Mil-std-973, paragraph 5.4.8.2 And Appendix D. Requests For Deviations Shall Be Processed In Accordance With Mil-std-973, Paragraph 5.4.8.3 And Appendix E. Requests For Waivers Shall Be Processed In Accordance With Mil-std-973, Paragraph 5.4.8.4 And Appendix E. (original and Two Copies Shall Be Submitted To Contracting Officer, Navicp-mech, P. O. Box 2020, Mechanicsburg Pa. 17055-0788.) 3.6.1 Configuration Control - When The Contractor Has Received Authorization On A Prior Contract For The Same Nsn For The Use Of A Drawing Of A Later Revision Status, That Authorization Is Hereby Extended To All Succeeding Contracts/purchase Orders Until another Drawing Revision Is Approved. The Contractor Will Notify The Pco Of This Occurrence In Each Instance, In The Response To The Solicitation. Such Notification Shall Be In Writing Setting Forth The Contract Under Which The Prior Authorization Was Granted, the Date Of The Granting Of The Authorization, And The Name Of The Granting Authority. Contractors Shall Also Refer Technical Inquiries (other Than Those Covered By Mil-std-973) On Company Letterhead Signed By A Responsible Company Official, With Copies Distributed As Stated Below. The Original And Two Copies Of All Contractor Generated Correspondence Regarding Configuration Shall Be Submitted To Contracting Officer, Navicp-mech, P.o. Box 2020, Mechanicsburg, Pa 17055-0788. Contractors Are Cautioned That Implementing Engineering Changes, Waivers, Deviations Or Technical Inquiries Into The Contract/purchase Order Without Approval Of The Contracting Officer Will Be At The Sole Risk Of The Contractor. 3.7 Qualification Requirements - This Item Contains Components That Must Be Manufactured By A Government Qualified Products List (qpl) Supplier. 3.8 Mercury Free - The Material Supplied Under This Contract/purchase Order Is Intended For Use On Submarines/surface Ships And Therefore Shall Contain No Metallic Mercury And Shall Be Free From Mercury Contamination. Mercury Contamination Of The Material will Be Cause For Rejection. If The Inclusion Of Metallic Mercury Is Required As A Functional Part Of The Material Furnished Under This Contract, The Contractor Shall Obtain Written Approval From The Procurement Contracting Officer Before Proceeding With Manufacture. The contractor's Request Shall Explain In Detail The Requirements For Mercury, Identify Specifically The Parts To Contain Mercury, And Explain The Method Of Protection Against Mercury Escape. Such A Request Will Be Forwarded Directly To The Procurement Contracting officer With A Copy To The Applicable Government Inspector. Upon Approval By The Contracting Officer, The Vendor Will Provide A "warning Plate" Stating That Metallic Mercury Is A Functional Part Of The Item And Will Include Name And Location Of That Part. The Use Of Mercury, Mercury Compounds, Or Mercury-bearing Instruments And/or Equipment In A Manner Which Might Cause Contamination In The Manufacture, Assembly, Or Test Of Material On This Contract Is Prohibited. The Most Probable Causes Of contamination Are Direct-connected Manometers, Mercury Vacuum Pumps, Mercury Seals, Or The Handling Of Mercury In The Immediate Vicinity. Mercury Switches, Mercury In Glass Thermometers, Standard Cells And Other Items Containing Mercury May Be Used If They Are located So As Not To Constitute A Contamination Hazard. If External Contamination By Metallic Mercury Occurs Or Is Suspected, The Following Test May Be Used To Determine Whether Contamination By Metallic Mercury Exists Or Whether Corrective Cleaning Measures Have Been Effective. Enclose The Equipment In A polyethylene Bag Or Close-fitting Airtight Container For Eight Hours At Room Temperature (70 Degrees F Minimum).sample The Trapped Air And If Mercury Vapor Concentration Is 0.01 Mg/cu Meter Or More, The Material Is Mercury Contaminated Insofar As The requirements Of This Contract Are Concerned. These Requirements Shall Be Included In Any Subcontract Or Purchase Order Hereunder And The Contractor Shall Insure Subcontractor Compliance With These Requirements. Technical Questions Pertaining To These Requirements Shall Be Referred To The Procurement Contracting Officer Via The Cognizant Administrative Contracting Officer. For Background, The Following Information Is Provided: Mercury Is Corrosive To Gold, Silver, Nickel, Stainless Steels, Aluminum And Copper Alloys. Stainless Steels, Nickel, And Copper Alloys Are Widely Used In Reactor Plants And Other Submarine/surface Ship Systems. Accidental Trapping Of Mercury In A component Could Cause Serious Damage To Vital Parts. Mercury Is Also Toxic If Inhaled, Ingested, Or Absorbed Through The Skin. It Is Evident That Grave Consequences Could Result From Small Amounts Of Mercury Vapor Present In An Unreplenished Submarine/surface ship Atmosphere. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Inspection System Requirements - The Supplier Shall Provide And Maintain An Inspection/quality System Acceptable To The Government. The Inspection System Requirements For This Contract/purchase Order Shall Be In Accordance With Mil-i-45208. Suppliers certified To Perform Under Iso 9001 Or Iso 9002 Are Granted Permission To Utilize The One Desired In Lieu Of Mil-i-45208. 4.3 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.4 Records Of Inspection - (this Requirement Is Not Applicable To Government Purchase Orders) Records Of All Inspection Work Performed By The Contractor, As Referenced Elsewhere In This Contract, Shall Be Kept Complete And Available To The Government During the Performance Of The Contract And For A Period Of Four Years After Final Delivery Of Supplies. 4.5 ;quality Conformance Inspection / Test (contractor) - The Contractor Shall Perform Quality Conformance Inspection (nondestructive) In Accordance With The Quality Assurance Provisions Of Group A, B, C, And D On Spcc Form 4250/7. quality Conformance Inspection Sample Size Shall Be In Accordance With Mil-std-105.; 4.6 ;quality Conformance Inspection / Test Report - The Contractor Shall Prepare And Submit A Report In Accordance With The Contract Data Requirements List (dd Form 1423).; 4.7 ;production Lot Test / Verification Inspection (government) - The Contractor Shall Deliver (as Directed By Attachment C And D Of Spcc Form 4250/7) Unit(s) To Naval Surface Warfare Center, Carderock Division, Building 60, Room 150, code 642, Bethesda, Md. 20084-5000, For Verification Inspection In Accordance With Paragraph 4.4 (verification Inspection) Of Mil-b-17931. Government Verification Inspection Shall Consist Of Nondestructive Testing. if Testing Is Nondestructive, Verification Inspection Sample(s) Shall Be Returned To The Contractor.; 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documents That Are Required By Private Industry In Fulfillment Of Contractual Obligations In Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. They May Be Obtained From The Publishers Of The Applicable Societies. C. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410p, 101 Strauss Avenue Indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contract Number, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: Contracting Officer Navicp-mech Code 87321 5450 Carlisle Pike P.o. Box 2020 Mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered From: Commanding Officer Navicp-mech Code 009 5450 Carlisle Pike P.o. Box 2020 Mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: Naval Inventory Control Point Code 1 Support Branch 700 Robbins Avenue Phildelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Shall Be Obtained By Submitting A Request On Dd Form 1425 To Navicp-mech. 6.2 Statement Of Prior Approval Data - If The Item(s) Being Offered Meet The Requirements Specified In The Contract/purchase Order And Is An Exact Duplicate Of Item(s) Previously Approved By The Government, Furnish The Nsn, Name Of Prime Manufacturer, Drawing number, Technical Manual Number, And Previous Contract Number. Provide This Information On Company Letterhead Signed By A Responsible Company Official. 6.3 Information Regarding Abbreviations, Symbols And Codes Appearing On Dd Form 1423 - The Following Information Is Provided To Assist In Understanding The Intent Of The Requirement To Provide A Deliverable Item To The Government. The Explanation Of abbreviation, Symbols And Codes Found In A Block Follows The Block Number As They Appear On The Dd Form 1423. block A: Is The Actual Contract Line Item No. block B: Is The Actual Collective Physical List Of The Deliverable Item(s) Which Are Part Of The Total Requirement Of The Contract/purchase Order. block C: Is The Category Of Data Required, Tdp Is Defined In Mil-t-31000. Tm Is Defined In Part 1x, Section B Of Dodi 5000.2. Navicp Has Reasoned That Most Dd Form 1423's Included In Our Solicitations Meet The Requirement Of Tdp As Navicp Does Not Regularly Purchase Only Technical Manuals Without Purchasing Hardware And Related Tdp Software. Therefore, Most Navicp Dd Form 1423 Category Code Will Be Tdp. block D: Is The Name Of The Parent System, Next Higher Assembly, Or The Item Being Purchased. block E: Is The Purchase Request Number, Request For Proposal Number, Invitation For Bid Number Or Another Number For Tracking And Monitoring Purposes. block F: Is The Successful Offerors Name And Or Cage Code. block G: Is The Name Of The Individual And Or The Code/activity Of The Individual Who Prepared The Dd Form 1423 And Included The Requirement In The Technical Data Package (tdp). block H: Self Explanatory. block I: Is The Name And Signature Of The Individual Who Approved The Content And The Need For Inclusion Of The Dd Form 1423 In The Tdp. block J: Self Explanatory. block 1: Is The Exhibit Line Item Number (elin). block 2: Is The Title Of The Data Item Cited In Block 4. block 3: Is The Subtitle Of The Data Item Cited In Block 4 And Is Used If The Title Requires Clarification. block 4: Is The Actual Data Item Description (did) Number Or The Actual Technical Manual Contract Requirements Number. In The Event The Dd Form 1423 Is Requiring A Technical Manual The Numbered Tmcr Will Be An Attachment To The Contract/purchase Order. block 5: Is The Section And Paragraph Area, Where The Requirement Statement For The Dd Form 1423 Will Be Found. block 6: Is The Activity That Will Inform The Contractor Of Approval, Conditional Approval Or Disapproval Of The Deliverable Item. block 7: Is A Code Which Designates Authority For Inspection And Acceptance Of The Deliverable Item. The Definition Of The Codes Is As Follows: Dd Form 250 Code Inspection Acceptance Ss (1) (2) Dd (3) (4) Sd (1) (4) Ds (3) (5) Lt (6) (7) No (8) (8) Xx (9) (9) (1) Inspection At Source. (2) Acceptance At Source. (3) No Inspection Performed At Source. Final Inspection Performance At Destination. (4) Acceptance At Destination. (5) Acceptance At Source. Acceptance Based On Written Approval From The Contract Officer. (6) Letter Of Transmittal Only. Lt Should Not Be Used When Inspection Is Required. The Data Is Sent By The Contractor Directly To The Personnel Listed In Block 14 Of The Dd Form 1423. Lt Is Used When The Contracting Agency Does Not Desire To Have A Dd Form 250 For Each And Every Piece Of Data Developed By The Contractor. The Only Other Authorized Use Of Lt Is The Special Case Where The Contracting Agency Does Not Desire To Have Separate Dd Forms 250 But Desires To Have A Government Quality Assurance Representative Perform Inspection. The Government Quality Assurance Representative Shall Be Listed On The Distribution In Block 14 And Requested To Provide Comments Via The Quality Assurance Letter Of Inspection. Use Of The Symbol Lt Is Not Authorized For Data Comprising Final Delivery Of Technical Data Package Of For Technical Manuals. (lt May, However, Be Used For Delivery Of Preliminary Tdp's Or Tm's). (7) As Specified In Block 8 Of The Dd Form 1423. (8) No Inspection Or Acceptance Required. No Dd Form 250 Or Letter Of Transmittal Required. Use Of The Symbol No Is Not Authorized For Data Comprising Technical Data Packages Or For Technical Manuals. (9) Inspection And Acceptance Requirements Specified Elsewhere In The Contract. block 8: Is The Approval Code - Items Of Critical Data Requiring Specific Advanced Written Approval Prior To Distribution Of The Final Data Item Will Be Identified By Placing An "a" In This Field. This Data Item Requires Submission Of A Preliminary Draft Prior To Publication Of A Final Document. When A Preliminary Draft Is Required, Block 16 Of The Dd Form 1423 Will Show Length Of Time Required For Government Approval/disapproval And Subsequent Turn-around Time For The Contractor To Resubmit The Data After Government Approval/disapproval Has Been Issued. Block 16 Will Also Indicate The Extent Of The Approval Requirements, E.g., Approval Of Technical Content And/or Format. block 9: Is The Distribution Statement Code Which Explains How The Government Can Circulate The Deliverable Item. The Definition Of Codes A, B, C, D, E, F Or X Is As Follows: A. Distribution Of The Item Is Unrestricted. B. Distribution Of The Item Is Limited To Agencies Only. C. Distribution Of The Item Is Limited To Contractors With A Cage Code And Have A Dd Form 2345 On File With The Defense Logistics Service Center (dlsc) Battle Creek, Mich. Or Government Activities. D. Distribution Of The Item Is Limited To Dod Activities And Dod Contractors Only. E. Distribution Of The Item Is Limited To Dod Components Only. F. Distribution Of The Item Is Restricted From Foreign Nations And Forign Nationals. block 10: Is The Frequency Which The Deliverable Item Is Expected To Be Delivered To The Government. The Abbreviations And Their Meaning. Annly Annually Asgen As Generated Asreq As Required Bi-mo Every Two Months Bi-we Every Two Weeks Daily Daily Dfdel Deferred Delivery Mthly Monthly One/r One Time With Revisions Qrtly Quarterly Semia Every Six Months Wekly Weekly Xtime Number Of Times To Be Submitted (1time, 2times...9times) Use Of These Codes Requires Further Explanation In Block 16 To Provide The Contractor With Guidance Necessary To Accurately Price The Deliverable Data Item. Other Abbreviations Not Appearing On The Above List May On Occasion Be Used In Block 10 Of The Dd Form 1423. When Other Abbreviations Are Used They Will Be Fully Explained In Block 16 Of The Dd Form 1423. block 11: Is The Last Calendar Date, Expressed In Year/month/day Format, The Deliverable Item Is To Be Received By The Requiring Office Cited In Block 6 Of The Dd Form 1423 For An Item With A Block 10 Entry Indication A Single Delivery. If The Item Is To Be Submitted Multiple Times, The Number Stated Is The Number Of Calendar Days After The Frequency Cited In Block 10 The Item Is To Be Received By The Requiring Office Cited In Block 6 Of The Dd Form 1423. On Occasion The Deliverable Item Will Be Required To Be Submitted Prior To The End Of The Frequency Cited In Block 6. In That Event The Requirement Will Be Fully Explained In Block 16 Of The Dd Form 1423. block 12: Is The Date Of First Submission Of The Deliverable Item To The Requiring Office (block 4) Expressed In Year/month/day Format. The Abbreviations And Their Meaning Are As Follows: Asgen As Generated Asreq As Required Dac Days After Contract Date Dfdel Deferred Delivery Eoc End Of Contract Eom End Of Month Eoq End Of Quarter Specific Instructions For These Requirements Will Be Provided In Block 16. If The Deliverable Item Is Constrained By A Specific Event Or Milestone The Constraint Will Be Fully Explained In Block 16 Of The Dd Form 1423. "as Generated", "as Required", And "deferred Delivery" Will Always Be Fully Explained In Block 16. block 13: Is The Date Of Subsequent Submission Of The Deliverable Item, After The Initial Submission. Subsequent Submission Is Only Used To Indicate The Specific Time Period. The Data Is Required When Block 10 Of The Dd Form 1423 Indicates Multiple Delivery Is Required. This Does Not Apply To Resubmission Of A Deliverable Item That Has Been Reviewed By The Requiring Office And Determined To Be Only Conditionally Acceptable Or Unacceptable. block 14a: Will Contain The Activity Name(s) Where The Deliverable Item Is To Be Sent. If The Activity Is Other Than Dcmc Or Nspcc The Full Name, Address (including Code) Will Be Specified. That Specific Information Will Be Located In Block 16 Of The Dd Form 1423. block 14b: Is The Number Of Copies Of Draft And Or Final Copies To Be Submitted. When Final "repro" Copies Ar To Be Submitted Block 16 Will Clarify The Type Of Repro Copies Required. (e.g., Vellum, Negative, Etc.) block 15: Is The Total Of Each Type Of Copies To Be Submitted As Required By Block 14. block 16: Is The Block Used To Provide Additional Or Clarifying Information Blocks 1 Through 15. This Block Is Also The Only Area Used To Tailor The Document Listed In Block 4. Only Deletions To The Minimum Requirements Stated In The Document In Block 4 Are Allowed. Block 16 May Also Be Used To Specify The Medium For Delivery Of The Data. block 17: Is The Block Where The Bidder Or Offerer Is To Enter The Appropriate Price Group. The Price Group Are Defines As Follows: A. Group I - Data Which The Contractor Prepares To Satisfy The Government's Requirements. The Contractor Does Not Need This Type Of Data To Perform The Rest Of The Contract. Price Would Be Based On Identifiable Direct Costs, Overhead, General And Administrative (g&a) And Profit. B. Group Ii - Data Essential To Contract Performance Which Must Be Reworked Or Amended To Conform To Government Requirements. The Price For Data In This Group Would Be Based On The Direct Cost To Convert The Original Data To Meet Government Needs And To Deliver It, Plus Allocable Overhead, G&a And Profit. C. Group Iii - Data Which The Contractor Must Develop For His Own Use And Which Requires No Substantial Change To Conform To Government Requirements Regarding Depth Of Content, Format, Frequency Of Submittal, Preparation, And Quality Of Data. Only The Costs Of Reproducing, Handling And Delivery, Plus Overhead, G&a And Profit, Are Considered Inpricing Data In This Group. D. Group Iv - Data Which The Contractor Has Developed As Part Of His Commercial Business. Not Much Of This Data Is Required And The Cost Is Insignificant. The Item Should Normally Becoded "no Charge." An Example Is A Brochure Or Brief Manual Developed For Commercial Application Which Will Be Acquired In Small Quantities, And The Added Cost Is Too Small To Justify The Expense Of Computing The Charge That Otherwise Would Go With The Acquisition. block 18: Enter The Total Estimated Price Equal To That Portion Of The Total Price Which Is Estimated To Be Attributable To The Production Or Development For The Government Of That Item Of Data. The Entry "n/c" For "no Charge" Is Acceptable. 6.4 Note To Government Testing Facility - Upon Completion Of The Government Tests Cited Under Section 4, Quality Assurance, A Letter Stating Approval/disapproval Of The Testing Performed Shall Be Mailed Within 5 Days To The Naval Inventory Control Point, attention: Procurement Contracting Officer, Identified In This Contract/purchase Order, 5450 Carlisle Pike, P.o. Box 2020, Mechanicsburg, Pa. 17055-0788. 6.5 ;external Documents Referenced In Section J Of This Contract Are Defined Below: ^acn-mil-b-17931e - Advanced Change Notice To Mil-b-17931 Revision E With Amendment 2; Navsea Letter 9244 Ser 05z/014 ^qtp-mil-b-17931 - Qualification Test Plan For Mil-b-17931 Noise Tested Ball Bearings ; Dated 01/24/2020 ^spcc Form 4250/7 - Rev 3 Dated 09 August 1995 - Modifications To Mil-b-17931e (11 Page Document); 6.5.1 ;hard Copy Documents Listed Above Can Be Acquired From Navsup Program Manager Or Navsea In-service Engineering Agent.; p/n: M17931-g046 these Bearings Are Shelf Life Code X (type 2, Extendable, ;60 Months). mil-b-17931e Bearings Should Be Labeled To Show A 10 Year (120 Month) Shelf Life. when Expired, Item Shelf Life Capable Of Being Extended Only After Program Management Approval And/or Engineering Evaluation. date Of First Submission=asreq ;submit Copies Of Certification Data Report Via Dd Form 250 To Addressee(s) Shown In Block 14 For Each Lot Shipped To The Government For Verification Inspection. Certification/data Shall Include Objective Evidence In Accordance With Paragraph 10.2.1 Of di-misc-80678.the Quality Conformance Inspection Shall Bein Accordance With Quality Assurance Provisions, Group A, B, C And D Of Spcc Form 4250/7. Certificate Shall Be Submitted No Later Than 75 Days Prior To The Contractual Delivery Date.; ;nswc - Naval Surface Warfare Center, Carderock Division, Building 60, Room 150, Code 642 Bethesda, Md. 20084-5000 ;

Explosive Hazard Pre-detonation (ehp) Roller

Pilatus3 X 2m Detector System (no Substitutes)

6515--welch Allyn/hillrom Gs777 Topeka Cboc's

V231--lodging Service

This Is A Combined Synopsis/solicitation For Commercial Items, Prepared In Accordance With The Format In Subpart 12.6 Of The Far And As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes Only Solicitation; Quotes Are Being Requested And A Separate Written Solicitation Will Not Be Issued. solicitation Number2124404y6174k95005 Applies And Is Used As A Request For Quote (rfq). This Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2005-87, Effective, 7 March 2016. It Is Anticipated That A Competitive Price Purchase Order Shall Be Awarded As A Result Of This Synopsis/solicitation. All Responsible Sources May Submit A Quotation, Which If Timely Received, Shall Be Considered By This Agency. the U.s. Coast Guard, Surface Forces Logistics Center (sflc) Intends To Award A Firm Fixed Price Purchase Order. No Down Payments Or Advanced Payments Will Be Made To The Awarded Vendor. Vendor Shall Ensure They Can Secure Funding For This Order Until Delivered And Received By The Us Coast Guard. Payment Will Be Made By Government Purchase Order (net 30) And The Vendor Shall Assume Financial Responsibility Until The Order Is Accepted And Received By Us Coast Guard. Payment Of The Work Is Authorized To Be Submitted As Work Is Completed But Must Be Approved By The Contracting Officer First. basis For Award:thissolicitation Is Based On Far 13 – Simplified Acquisition Procedures And Quotes Will Be Reviewed And Awarded On A Lowest Priced Technically Acceptable Basis Per The Solicitation. Past Performance Will Only Be Reviewed For “responsibility” Basis Per Far 9.1.there Are No Adjectival Ratings Nor Will Award Be Based On A Best Value Tradeoff Basis.all Quote’s Will Be Evaluated For Who Meets All The Technical Requirements, Next Who Meets Our Deadlines And Finally What Is The Lowest Cost. all Quotes Shall Be Emailed To Shellby Hammond Via Shellby.m.hammond@uscg.mil And Shall Be Received No Later Than August 28th, 2024 At 12:00 Pm (eastern). All Emailed Quotes Shall Have 2124404y6174k95005 In The Subject Of The Email. item 0001 – Grit Removal & Disposal procure Grit Removal & Disposal Of Approximately (160) Tons Of 80 Mesh Garnet From The Cgfrc Donald Horsley Hull #1117. The (pop) Period Of Performance Shall Be From 09/30/2024 To 10/12/2024 From 7pm To 6am Weekdays & Weekends. Contractor To Provide Personnel, Equipment, Tools, And Supervision To Remove The Material From Inside The Enclosure, Dust Drums, Dust Collector, Surrounding Area, And The Deck Of The Vessel. Contractor Must Comply To The Coast Guard Yard Statement Of Work For Nonhazardous Grit Removal & Disposal. period Of Performance: Two (2) Consecutive Weeks Between 09/30/24 To 10/12/24. Final Period Of Performance Will Be Determined By The Ship Superintendent Carl Weiland, Or Yard Poc Jann Blevins. pricing: 1 Job $__________________ place Of Performance: U.s. Coast Guard Yard Attn: Jann Blevins 2401 Hawkins Point Road Baltimore, Md 21226 invoicing In Ipp it Is Now A Requirement That All Invoicing For Purchase Orders Will Now Be Entered And Processed Through Https://www.ipp.gov. far Clauses this Order Is Subject To But Is Not Limited To The Following Federal Acquisition Regulations: 52.204-24 Representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment. 52.204-26 Covered Telecommunications Equipment Or Services-representation. 52.212-1 Instructions To Offerors—commercial Products And Commercial Services. 52.212-3 Offeror Representations And Certifications—commercial Products And Commercial Services. 52.204-23 Prohibition On Contracting For Hardware, Software, And Services Developed Or Provided By Kaspersky Lab Covered Entities. 52.204-25 Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment. 52.212-5 Contract Terms And Conditions Required To Implement Statutes Or Executive Orders—commercial Products And Commercial Services.

Concrete Beam And Piling Repair - Field Research Facility