Uniform Tenders

Details: 5. Project Number (if Applicable) code 7. Administered By 2. Amendment/modification Number code 6. Issued By 8. Name And Address Of Contractor 4. Requisition/purchase Req. Number 3. Effective Date 9a. Amendment Of Solicitation Number 9b. Dated page Of Pages 10a. Modification Of Contract/order Number 10b. Dated bpa No. 1. Contract Id Code facility Code code offers Must Acknowledge Receipt Of This Amendment Prior To The Hour And Date Specified In The Solicitation Or As Amended, By One Of The Following Methods: the Above Numbered Solicitation Is Amended As Set Forth In Item 14. The Hour And Date Specified For Receipt Of Offers e. Important: is Extended, (a) By Completing Items 8 And 15, And Returning __________ Copies Of The Amendment; (b) By Acknowledging Receipt Of This Amendment On Each Copy Of The offer Submitted; Or (c) By Separate Letter Or Electronic Communication Which Includes A Reference To The Solicitation And Amendment Numbers. Failure Of Your acknowledgment To Be Received At The Place Designated For The Receipt Of Offers Prior To The Hour And Date Specified May is Not Extended. 12. Accounting And Appropriation Data (rev. 11/2016) is Required To Sign This Document And Return ___________ Copies To The Issuing Office. is Not, a. This Change Order Is Issued Pursuant To: (specify Authority) The Changes Set Forth In Item 14 Are Made In The Contract Order No. In Item 10a. 15c. Date Signed b. The Above Numbered Contract/order Is Modified To Reflect The Administrative Changes set Forth In Item 14, Pursuant To The Authority Of Far 43.103(b). result In Rejection Of Your Offer. If By Virtue Of This Amendment You Desire To Change An Offer Already Submitted, Such Change May Be Made By Letter or Electronic Communication, Provided Each Letter Or Electronic Communication Makes Reference To The Solicitation And This Amendment, And Is Received Prior To the Opening Hour And Date Specified. c. This Supplemental Agreement Is Entered Into Pursuant To Authority Of: d. Other contractor 16c. Date Signed 14. Description Of Amendment/modification 16b. United States Of America except As Provided Herein, All Terms And Conditions Of The Document Referenced In Item 9a Or 10a, As Heretofore Changed, Remains Unchanged And In Full Force And Effect. 15a. Name And Title Of Signer 16a. Name And Title Of Contracting Officer 15b. Contractor/offeror standard Form 30 previous Edition Not Usable prescribed By Gsa - Far (48 Cfr) 53.243 (type Or Print) (type Or Print) (organized By Ucf Section Headings, Including Solicitation/contract Subject Matter Where Feasible.) (number, Street, County, State And Zip Code) (if Other Than Item 6) (specify Type Of Modification And Authority) (such As Changes In Paying Office, Appropriation Date, Etc.) (if Required) (see Item 11) (see Item 13) (x) check one 13. This Item Applies Only To Modifications Of Contracts/orders, it Modifies The Contract/order No. As Described In Item 14. 11. This Item Only Applies To Amendments Of Solicitations amendment Of Solicitation/modification Of Contract (signature Of Person Authorized To Sign) (signature Of Contracting Officer) 1 5 0001 01-02-2025 544-25-2-4075-0004 none 36c247 department Of Veterans Affairs visn 7 Network Contracting Activity central Alabama Healthcare System 215 Perry Hill Road montgomery Al 36109 36c247 department Of Veterans Affairs visn 7 Network Contracting Activity 215 Perry Hill Road montgomery Al 36109 to All Offerors/bidders 36c24725q0195 x x x x 1 this Amendment To Solicitation 36c24725q0195 Is To Do The Following: (1) Add Additional Language To The Scope Of Work (2) Provide Responses To The Request For Information (rfi) Received Prior To Due Date (see Attached). *all Other Terms And Conditions Remain Unchanged. quentin Deloney contracting Officer, Nco-07 page 5 Of 5 request For Information 36c24725q0195 facility Mover And Event Set-up Services *any Questions Received That Have Not Been Answered In This Amendment Have Already Been Addressed In The Posted Solicitation. scope Of Work Is Amended To Add The Following: The Contractor Shall Furnish All Contract Oversight, Management; Supervisory And Technically Trained Personnel; Uniforms; Equipment, Materials, And Supplies Necessary To Provide Commercial Office Moving And Relocation Services For Cavhcs. This Includes, But Is Not Limited To The Following, Providing All Labor, Materials, And Equipment Necessary To Accomplish The Work As Stated Herein, E.g., Excess Property Pickup; Furniture Installation; Systems Furniture Installation, Breakdown And Repair; Routine Moving Services Activities; Special Event Set-ups And Breakdown; Special Furniture Cleaning And Repair; Special Moving Activities; Place Furnishing In Designated Storage Areas In An Organized Manner; And Special Handling Moving Activities. Contractor Shall Furnish All Vehicles, Insurance, Drivers, Supervision, Maintenance, Equipment, And Operating Supplies/services Required For The Safe Transport Of The Property And Performing All Services Necessary To Provide Moving And Relocation Services. 1. Confirm There Are 6 Locations With 4 Being In Alabama And 2 In Ga. That Will Need To Be covered. -9 Possible Work Locations; 3 Georgia Locations; 6 Alabama Locations -215 Perry Hill Road, Montgomery, Al 36109-3725 (main Work Site) -8105 Veterans Way, Montgomery, Al 36117-3879 -2400 Hospital Road, Tuskegee, Al 36083 (main Work Site) -3753 Ross Clark Circle, Suite 4, Dothan, Al 36303-2291 -159 Whetstone Street, Monroeville, Al 36460-2625 -301 Andrews Ave, Fort Rucker, Al 36362-5107 -6635 Bass Road, Fort Moore, Ga 31905-5602 -2100 Comer Avenue, Plaza G, Columbus, Ga 31904-8725 -6910 River Road, Columbus, Ga 61904-2316 2. In The Previous Notification We Seen 2 Locations Located On A Military Base That Were Not Listed On the Solicitation. Will They Be Covered? -past Solicitations/contract Awards Will Not Be Addressed 3. Will The Us Veterans Affairs Be Assisting In Obtaining Military Passes To Gain Access To The bases? - When Delivering To Those Locations, Contractor Must Meet All Requirements By The Base To Gain Access. A Va Representative Will Be Onsite, But This Does Not Mean Any Of The Requirements Will Be Waived. Contractor Will Know At Least A Week In Advance Of Any Deliveries Going To The Base. 4. You Stated Work Is To Be Performed Mon- Fri. But Days Can Be Changed And On Calls Can Bedone. Please Clarify? -please Read The Solicitation In Its Entirety. Solicitation States As Needed Schedule Updates Shall Be Coordinated With And Approved By The Cor. Such Changes Will Be Coordinated In A Manner Both Parties Can Agree On. 5. Will There Be A Set Schedule Confirmed At The Beginning Of The Contract For The Duration Of the Contract? - No Set Schedule But Schedule Will Be Reasonable And Agreed Upon By Va And Contractor. 6. If No Set Schedule, When Will We Be Notified Services Are Needed? -a Week In Advance 7. Will The Va Be Able To Add Days On Through The Week With Last Minute Notices? -yes, As Long As The Hours Do Not Exceed The 860 Hours Allotted For The Year. 8. Is The Price Schedule 860 Hours? -please Read The Solicitation In Its Entirety. The Base And Each Option Year Is Allotted 860 Hours. 9. Is 860 Hours Guaranteed For The Year? -no; 860 Hours Worth Of Work Are Not Guaranteed To Be Used Each Year. 10. Are You Guaranteeing 8-hour Workdays? -no 11. Are We Working 1-2 Hours, 4-5 Hours, Or Full 8-hour Days? - Contractor Should Plan For Between 4 To 8-hour Days. 12. Will Items Be Left On The Truck From The Prior Day, Overnight, To Be Delivered The Following day? - The Government Does Not Expect Items To Be Left On Trucks. Contractor Is Responsible For Loading And Unloading Mover Vehicles, Therefore, It Is At The Contractor S Discretion And Cost To Store Any Items During Moving Activities And Should Be With The Approval And Proper Notification Being Made To The Cor. 13. Can You Clarify Excess Pickup? Are We Expected To Move Medical And It Equipment? Could You Give Examples Of Oversized Items? - This Could Be Cubical Panels, White/glass Boards, Desks, Etc.. Examples Of Oversized Equipment May Include Pews, Conference Room Tables, Desks, And Storage Cabinets. 14. Confirm That You Are Aware That There Are 6-8 Services Added On That Were Not There In The previous Years? Therefore, This Will Drive The Hourly Rate Up Tremendously. -previous Contract Awards; Solicitations; Or Occurrences Will Not Be Addressed. Only Clarifications On The Information Presented In The Current Solicitation Will Be Made. 15. Our Hourly Rate Are To Include Pricing For Equipment, Labor, Fuel, Miles, Etc..? -hourly Rate In Proposals Should Be All Inclusive. 16. Under Specialty Furniture Cleaning And Repair. Can You Clarify The Repair Service Needed? - Re-attaching Doors To Furniture; Replacing Missing Screws/nuts On Furniture; Replacing Arms On Task Chairs; Or Glides On Tables/chairs. 17. If A Repair Is Performed Who Takes The Liability Of That Item Breaking Again? - If A Repaired Item Breaks Due To The Repair Being Negligent, The Contractor Will Be Held Liable. 18. Will We Be Moving Equipment That Is Still Covered Under The Warranty? - Yes, Some Items May Be Under Warranty Such As Desk And Chairs. 19. Will We Be Mounting Items On Walls? Provide Examples? - Not On A Regular Basis. For Example, Some Workstations Mount To The Wall And Other Furniture Must Anchored To The Wall To Prevent Tilting. 20. Who Will Be Responsible For Holes In The Wall And Where Does That Fall Under The Lease agreements Of These Buildings And Who Will Be Responsible? 21. Could You Provide More Details On The Specific Tasks Involved In The Relocation, Moving, And Event Set-up Services - Please Read The Solicitation In Its Entirety 22. What Is The Expected Volume Of Items (e.g., Office Furniture, Equipment) To Be Moved And Set Up? - Unpredictable; As Needed Basis 23. Are There Any Special Handling Requirements (e.g., Fragile Or High-value Items)? -please Read The Solicitation In Its Entirety. 24. Can You Confirm If This Will Be A Firm-fixed-price Contract? -yes 25. Will The 860 Hours Be Paid Regardless Of Whether They Are Utilized? -no; Only Hours Worked Will Be Payable 26. Will This Be An On-call Contract, Or Will There Be A Confirmed Schedule? - For On Lease Properties, Movers Will Not Be Mounting Anything To The Wall. For The Two Main Campuses (central Alabama Veterans Health Care System East Campus 2400 Hospital Road, Tuskegee, Al 36083 And Central Alabama Veterans Health Care System West Campus 215 Perry Hill Road, Montgomery, Al 36109-3725) Cor Will Work With Maintenance To Repair Holes In The Wall From Furniture Removal. The Movers Are Not Expected To Paint Or Patch Unless The Movers Have Damaged Walls Or Doors Due To Negligence And/or Accident. 27. Are There Any Penalties For Delays Or Failure To Meet Performance Standards? -yes, Unsatisfactory Ratings; Opt-out Of Exercising Options; And Possible Termination For Cause 29. Are There Specific Quality Assurance Standards That Need To Be Adhered To? - Please See Attached Quality Assurance Plan Posted On Page 89.

Details: Description Request For Quotation (rfq) Supply And Delivery Of Personal Protective Equipment Rfq No. Emb-erlsd-2024-11-122-2nd 1. The Department Of Environment And Natural Resources – Environmental Management Bureau (denr-emb) Hereinafter Referred To As The “purchaser” Now Requests For Submission Of Price Quotations For The Procurement Of The Aforesaid Items Described In The Technical Specifications/scope Of Works/terms Of Reference. No. Description Qty Uom Unit Price Abc 1 Field Jacket; -waterproof -easy Transport -anatomic Design -breathable -ventilation 1/2 Zip To Increase Ventilation While Walking - With Denr Logo(embroidery) 9 Pcs 1,275.60 11,480.40 2 Field Shoes; - Resistant Soles For Walking Trails - Waterproof - Breathable Insole | Ankle Collar: 3d Comfortable Mesh - Abrasion Resistance - Sole Design And Spike Clears Mud Easily - Lightweight - Lightweight Eva Foam Midsole That Limits The Impact Of Stones 9 Pcs 4,603.20 41,428.80 3 Field Pants; - Abrasion Resistance - Freedom Of Movement - Quick Drying - Water Repellent - Light, Breathable Fabric - Pockets - 5 Secure With Zip Pocket - With Denr Logo(embroidery) 9 Pcs 2,130.24 19,172.16 4 Field Hat; -lined Bucket Hat Built To Battle Wind, Sun, And Stains. -full Circle Coverage: Bucket Hat Built With Upf 50 Sun Protection, Stain-repellency, And Windbreaker Fabric. Upf 40 Guards Against Skin Damage Using Tight Fabric Construction And Modified Fibers To Block Uva/uvb Rays, Repels Moisture And Resists Stains By Preventing Liquids From Absorbing Into Fast-drying Yarns, So You Stay Clean And Dry In Damp, Messy Conditions. - With Denr Logo(embroidery) 9 Pcs 816.98 7,352.86 5 High Knee Boots; - Waterproof, Slip Resistant, Durable Material, Approximately 80 Cm In Height 5 Pcs 696.00 3,480.00 6 Heavy Duty Industrial Jacket; -durable Anti-flame Jacket With Robust Hidden One-way Metal Zipper And Practical Pockets. -pockets For Ample Storage -sew-on Flame-resistant, Industrially Washable -equipped With A Host Of Features Including Ce-cat Iii -capable Of Blocking Of Uv Rays, And Protection Against Molten Metal Splash -with Hook And Loop Cuffs For A Secure Fit And An External Standards Label For Quick Identification Of Protection Levels -metal Free - With Denr Logo(embroidery) Certification: En Iso 11612 A1+a2 3 Pcs 6,168.34 18,505.01 7 Heavy Duty Safety Shoes; -safety Steel Toe Cap -assorted Sized -electrostatic Discharge Slip Resist -sole Puncture Resistant -certification: En Iso 20345:2011 2 Units 7,854.00 15,708.00 8 Reusable Half Face Mask Respirator -for Construction, General Manufacturing, Mining, Oil & Gas, Pharmaceutical, Primary Metal, Transportation -certification: Approved By Niosh 3 Pcs 1,780.80 5,342.40 9 Hardhat Secure Fit -product Color: White -oshc Tested: Yes -product Type: Cap Style Hard Hat -suspension Type: 4 Point Ratchet -shell Material: Hdpe -features: Pressure Diffusion Technology, Uv Indicator - With Denr Logo 3 Pcs 1,323.34 3,970.01 Note: Sizes Will Be Provided By The End-user Upon Bidder's Receipt Of The Purchase Order (po) 2. A Set Of Technical Requirements Are Provided In Attachment/s. Item/s Listed Under The Purchaser’s Terms Of Reference/s Must Be Complied With On A Pass-fail Basis. Failure To Meet Any One Of The Requirements May Result In Rejection Of The Quotation. The Approved Budget For This Contract Is Php132,331.63. 3. Bidding Procedures Will Be Conducted In Accordance With The Provisions Of The Implementing Rules And Regulations (irr) Of Republic Act 9184. 4. It Is The Intent Of The Purchaser To Evaluate The Bid/quotation On A Per Item Whichever Is Advantageous To The Government. And Award Will Be Made To The Bid/quotation Or Combination Of Quotations Resulting In The Lowest Evaluated Quotation Meeting The Purchaser’s Technical Specifications. 5. Quotations Must Be Delivered At The Address Below Not Later Than Of 02:00 P.m. Of January 17, 2024. Department Of Environment And Natural Resources Environmental Management Bureau Emb Hrd Building Ground Floor, Afmd Denr Compound, Visayas Avenue, Diliman, Quezon City 6. Prices Must Be Quoted In Philippine Peso And Must Include The Unit Price And Total Price, Inclusive Of All Taxes To Be Paid And Other Incidental Cost To The Delivery Site/s If The Contract Is Awarded. 7. Bid/quotation Submission Maybe Typewritten And Must Be Placed In A Sealed Envelope Marked Supply And Delivery Of Personal Protective Equipment Rfq No. Emb-erlsd-2024-11-122 (oss Required) Sealed Bids Must Be Forwarded To Bac Secretariat (administrative, Financial And Management Division) Located At Emb-afmd, Hrd Building Ground Floor Or May Email To Embquotations@gmail.com Submission Must Be Or On Before The Indicated Date At Time. Late Bids And Proposals Above The Abc Shall Be Automatically Disqualified. 8. Bids/quotations Shall Be Valid For Sixty (60) Calendar Days From The Deadline Of Submission Of Bids. 9. The Delivery Period Shall Be Within Sixty (60) Calendar Days From Receipt Of The Purchase Order (po) And/or Job Order (jo). The Supplier Must Inform The Purchaser At Least Three (3) Days Before The Date Of Delivery. The Delivery Will Be Made Only During Working Days And Hours. 10. Delivery Sites: See Delivery Sites Enumerated In The Quotation Form Environmental Management Bureau Hrd Building Ground Floor Denr Compound, Visayas Avenue, Diliman, Quezon City Attention: Afmd-property And General Services Section 11. The Applicable Rate For Late Deliveries Is One Tenth (1/10) Of One (1) Percent Of The Cost Of The Unperformed Portion Of The Contract For Every Day Of Delay. The Maximum Deduction Shall Be Ten Percent (10%) Of The Amount Of Contract. Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Contract Amount, The Purchaser Shall Rescind The Contract Without Prejudice To Other Courses Of Action And Remedies Open To It. 12. The Purchaser Reserves The Right To Accept Or Reject Any Quotation, And To Annul The Bidding/shopping Process Or Reject All Quotations At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder/bidders. The Purchaser Also Reserves The Right To Waive Minor Deviations/defects Or Infirmities Therein. A Minor Deviation/defect Or Infirmity Is One That Does Not Materially Affect The Overall Functionality Of The Material And The Capability Of The Supplier To Perform The Contract. 13. Participating Service Provider/s Must Abide By The Existing Health, Safety, Environment, Quality And Other Related Laws And Procedures As Prescribed By The Philippine Government. 14. Documents To Submit: A) Quotation Form With Technical Specifications. B) Mayor’s/business Permit. C) Philgeps Registration Number/proof Of Philgeps Registration D) Tax Clearance Only (not Itr) E) Oss-omnibus Sworn Statement (notarized) Engr. Rodney V. Diaz Oic-property & General Services Section Attachment 1 Republic Of The Philippines Department Of Environment And Natural Resources Environmental Management Bureau Technical Specifications Item No. 1 Supply And Delivery Of Personal Protective Equipment Quantity: Country Of Origin: Brand/model: All Items Listed Under The Purchasers’ Specifications Must Be Complied On A Pass-fail Basis. Failure To Meet Any One Of The Requirements May Result To Rejection. Qty Uom Purchaser’s Specifications Bidder’s Specifications 1 Set Field Jacket; -waterproof -easy Transport -anatomic Design -breathable -ventilation 1/2 Zip To Increase Ventilation While Walking - With Denr Logo(embroidery) 21 Pcs Field Shoes; - Resistant Soles For Walking Trails - Waterproof - Breathable Insole | Ankle Collar: 3d Comfortable Mesh - Abrasion Resistance - Sole Design And Spike Clears Mud Easily - Lightweight - Lightweight Eva Foam Midsole That Limits The Impact Of Stones 5 Pcs Field Pants; - Abrasion Resistance - Freedom Of Movement - Quick Drying - Water Repellent - Light, Breathable Fabric - Pockets - 5 Secure With Zip Pocket - With Denr Logo(embroidery) 5 Units Field Hat; -lined Bucket Hat Built To Battle Wind, Sun, And Stains. -full Circle Coverage: Bucket Hat Built With Upf 50 Sun Protection, Stain-repellency, And Windbreaker Fabric. Upf 40 Guards Against Skin Damage Using Tight Fabric Construction And Modified Fibers To Block Uva/uvb Rays, Repels Moisture And Resists Stains By Preventing Liquids From Absorbing Into Fast-drying Yarns, So You Stay Clean And Dry In Damp, Messy Conditions. - With Denr Logo(embroidery) 10 Units High Knee Boots; - Waterproof, Slip Resistant, Durable Material, Approximately 80 Cm In Height 2 Units Heavy Duty Industrial Jacket; -durable Anti-flame Jacket With Robust Hidden One-way Metal Zipper And Practical Pockets. -pockets For Ample Storage -sew-on Flame-resistant, Industrially Washable -equipped With A Host Of Features Including Ce-cat Iii -capable Of Blocking Of Uv Rays, And Protection Against Molten Metal Splash -with Hook And Loop Cuffs For A Secure Fit And An External Standards Label For Quick Identification Of Protection Levels -metal Free - With Denr Logo(embroidery) Certification: En Iso 11612 A1+a2 2 Units Heavy Duty Safety Shoes; -safety Steel Toe Cap -assorted Sized -electrostatic Discharge Slip Resist -sole Puncture Resistant -certification: En Iso 20345:2011 Reusable Half Face Mask Respirator -for Construction, General Manufacturing, Mining, Oil & Gas, Pharmaceutical, Primary Metal, Transportation -certification: Approved By Niosh Hardhat Secure Fit -product Color: White -oshc Tested: Yes -product Type: Cap Style Hard Hat -suspension Type: 4 Point Ratchet -shell Material: Hdpe -features: Pressure Diffusion Technology, Uv Indicator - With Denr Logo Note: Sizes Will Be Provided By The End-user Upon Bidder's Receipt Of The Purchase Order (po) Name Of Company : _________________________________ Postal Address : _________________________________ Email Address : _________________________________ Telephone & Fax No. : _________________________________ Signature Over Printed Name : _________________________________ Designation : _________________________________ Other Requirements 1. Quotation Submission Requirements - Supplier Must Submit A Duly Accomplished And Signed Price Quotation, And Supplier’s Line By Line Technical Specifications Compliance. - Supplier’s Must Accomplish/fill All Required Pages To Facilitate Documentation - Supplier Must Be Philgeps Registered. - Business Permit/license Permit - Failure To Follow The Above Requirements May Result To Outright Rejection Of Submitted Quotation/s. 2. Evaluation And Awarding Of Quotation - The Purchaser Will Evaluate And Compare The Offers, Which Have Been Determined As Responsive Pursuant To The Completeness Of The Purchaser Requirements - Compliance To The Technical Specifications - Awards Shall Be Made To The Lowest Evaluated And Responsive Quotation. - Submission Of Requirements Containing False Information Or Falsified Documents That Contain False Information Or Concealment Of Such Information In Order To Influence The Outcome Of Eligibility Screening Or Any Other Stage Of The Procurement Process May Result To Blacklisting Guidelines As Provided In The Irr Of Ra 9184. 3. Terms Of Payment - 100% Of The Contract Price Will Be Paid Upon Verification/inspection And Acceptance Of The Services In Compliance To Existing Government Auditing And Accounting Procedures. Quotation Form Date: ____________________ Attention: Afmd-property And General Services Section Environmental Management Bureau Hrd Building Ground Floor, Afmd Denr Compound, Visayas Avenue, Diliman, Quezon City 1) Having Examined The Subject Request For Quotation (rfq) Including The Technical Specifications, We, The Undersigned Offer To Supply And Deliver The Following: No. Description Delivery Site Qty Uom Unit Price Total Price Supply And Delivery Of Personal Protective Equipment Environmental Management Bureau, Hrd Building Ground Floor, Afmd Denr Compound, Visayas Avenue, Diliman, Quezon City 1 Field Jacket; -waterproof -easy Transport -anatomic Design -breathable -ventilation 1/2 Zip To Increase Ventilation While Walking - With Denr Logo(embroidery) 1 Set 2 Field Shoes; - Resistant Soles For Walking Trails - Waterproof - Breathable Insole | Ankle Collar: 3d Comfortable Mesh - Abrasion Resistance - Sole Design And Spike Clears Mud Easily - Lightweight - Lightweight Eva Foam Midsole That Limits The Impact Of Stones 21 Pcs 3 Field Pants; - Abrasion Resistance - Freedom Of Movement - Quick Drying - Water Repellent - Light, Breathable Fabric - Pockets - 5 Secure With Zip Pocket - With Denr Logo(embroidery) 5 Pcs 4 Field Hat; -lined Bucket Hat Built To Battle Wind, Sun, And Stains. -full Circle Coverage: Bucket Hat Built With Upf 50 Sun Protection, Stain-repellency, And Windbreaker Fabric. Upf 40 Guards Against Skin Damage Using Tight Fabric Construction And Modified Fibers To Block Uva/uvb Rays, Repels Moisture And Resists Stains By Preventing Liquids From Absorbing Into Fast-drying Yarns, So You Stay Clean And Dry In Damp, Messy Conditions. - With Denr Logo(embroidery) 5 Units 5 High Knee Boots; - Waterproof, Slip Resistant, Durable Material, Approximately 80 Cm In Height 10 Units 6 Heavy Duty Industrial Jacket; -durable Anti-flame Jacket With Robust Hidden One-way Metal Zipper And Practical Pockets. -pockets For Ample Storage -sew-on Flame-resistant, Industrially Washable -equipped With A Host Of Features Including Ce-cat Iii -capable Of Blocking Of Uv Rays, And Protection Against Molten Metal Splash -with Hook And Loop Cuffs For A Secure Fit And An External Standards Label For Quick Identification Of Protection Levels -metal Free - With Denr Logo(embroidery) Certification: En Iso 11612 A1+a2 2 Units 7 Heavy Duty Safety Shoes; -safety Steel Toe Cap -assorted Sized -electrostatic Discharge Slip Resist -sole Puncture Resistant -certification: En Iso 20345:2011 2 Units Reusable Half Face Mask Respirator -for Construction, General Manufacturing, Mining, Oil & Gas, Pharmaceutical, Primary Metal, Transportation -certification: Approved By Niosh Hardhat Secure Fit -product Color: White -oshc Tested: Yes -product Type: Cap Style Hard Hat -suspension Type: 4 Point Ratchet -shell Material: Hdpe -features: Pressure Diffusion Technology, Uv Indicator - With Denr Logo Note: Sizes Will Be Provided By The End-user Upon Bidder's Receipt Of The Purchase Order (po) 2) We Undertake, If Our Quotation Or Bid Is Accepted, To Deliver The Above Goods Within The Sixty (60) Calendar Day Delivery Period From Receipt Purchase Order (po) Or Job Order (jo). 3) We Agree To Abide By This Quotation/bid For A Period Of Sixty (60) Days After The Deadline Of Submission Specified In The Rfq. 4) We Understand That Payment For Items Delivered Will Be Made To The Winning Supplier After The Inspection And Acceptance Of Goods Delivered. Name Of Company : _________________________________ Postal Address : _________________________________ Email Address : _________________________________ Telephone & Fax No. : _________________________________ Signature Over Printed Name : _________________________________ Designation : _________________________________ Omnibus Sworn Statement (revised) [shall Be Submitted With The Bid] _________________________________________________________________________ Republic Of The Philippines) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct. 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted. 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree. [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree. [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ________ And His/her Community Tax Certificate No. _______ Issued On ____ At ______. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued] Doc. No. _____ Page No. _____ Book No. _____ Series Of _____

Details: Sources Sought Announcement title: Laboratory Casework System id: Ss-niaid-25-2250915 post Date: January 7, 2025 response Date: January 17, 2025 naics: 337127 introduction this Is A Sources Sought Notice. This Is Not A Solicitation For Proposals, Proposal Abstracts, Or Quotations. The Purpose Of This Notice Is To Obtain Information Regarding The Availability And Capability Of All Qualified Sources To Perform A Potential Requirement. background, Purpose, Objectives the Division Of Intramural Research (dir) Office Of Operations Management (oom) Is A Component Of Niaid, One Of The Largest Institutes Of The National Institutes Of Health (nih). For More Than 65 Years, Dir Has Been At The Forefront Of Research On Immunologic, Allergic, And Infectious Diseases. Their Discoveries Promote The Development Of New Vaccines, Diagnostics, And Therapeutics That Improve Human Health. Dir Scientists Study All Aspects Of Infectious Diseases, Including The Causative Agents, Vectors, And Pathogenesis In Human And Animal Hosts. Clinical Research Is Integral To The Dir Mission, Enabling Key Lab Discoveries To Be Rapidly Translated Into Methods To Prevent, Diagnose, Or Treat Disease. the Rocky Mountain Lab’s Oom Renovation’s Division Is Requesting A Laboratory Casework System To Augment Their Existing System. The Casework Is Being Ordered For Laboratory Spaces 3118, 3119, And 3120 To Support The Incoming Tenure-track Principal Investigator In The Laboratory Of Neurological Infections And Immunity (lnii) At Rml. The Incoming Principal Investigator Will Be Instrumental In Advancing The Mission Of Rml. the Casework Will Consist Of New Alpha Modular Casework That Matches The Specifications And Design Currently Utilized In The Quad Building (3120) And Alpha Modular Casework Found In Building 28. This Casework Is Flexible, Durable, And Designed To Accommodate The Evolving Needs Of Cutting-edge Scientific Research. The Current Laboratory Spaces Are Outdated And No Longer Meet The Needs Of Modern Scientific Research. Upgrading To The Alpha Modular Casework Will: Provide Greater Flexibility For Adapting Workspaces To Various Research Needs. the Casework System Must Be Compatible With The Existing Laboratory Casework System. The Required Laboratory Casework System Must Be Modular, Durable, Customizable, And Meet Nih Design Requirements Manual (drm) Specifications And Biosafety Standards. The Required Laboratory Casework Is Essential To Support The Mission Of The National Institutes Of Health (nih) And Affiliated Agencies. This Procurement Will Equip The Labs With High-quality, Durable, And Modular Casework That Meets The Stringent Performance And Biosafety Requirements Necessary For Cutting-edge Research. This Action Ensures Researchers Have Access To Functional And Standardized Workspaces Critical For Advancing Scientific Discovery And Operational Efficiency. the Need For Continuity In Laboratory Infrastructure Is Paramount. Currently, A Significant Portion Of The Existing Laboratory Furniture And Casework Is Sourced From Innovative Laboratory Systems. This Consistency Ensures Seamless Integration With Existing Infrastructure, Minimizes Disruptions, And Facilitates Ongoing Maintenance Using In-house Expertise And Stocked Replacement Parts. description Of Need: See Attachment project Requirements successful Offerors Must Have The Knowledge, Skill, Ability, And Resources To Reliably Provide A Brand Name Or Equal To Laboratory Casework System. The Casework Must Integrate Seamlessly With Existing Infrastructure And Meet The Following Specifications: cabinet Material: Steel Cabinet Bodies, Drawer Bodies, Shelves, Drawer Heads And Door Assemblies Shall Be Fabricated From Cold Rolled Steel And Chemically Resistant Finishes To Withstand The Rigors Of A Research Environment And Meet Sefa 8 Industry Standards. Sefa-standards-and-its-importance-for-lab-furniture materials a. General Requirements: it Is The Intent Of This Specification To Provide A High-quality Steel Cabinet Specifically Designed For The Laboratory Environment. b. Steel: 1. Cold Rolled Steel: Cold Rolled Sheet Steel Shall Be Prime Grade 12, 14, 16, 18 And 20 Gauge U.s. Standard; Roller Leveled, And Shall Be Treated At The Mill To Be Free Of Scale, Ragged Edges, Deep Scratches Or Other Injurious Effects. c. Hardware And Trim: 1. The Cabinets And Drawers Must Meet Sefa 8 Specifications A. Drawer And Door Pulls Shall Construction a. Steel Cabinet Construction: 1. General: A. The Steel Furniture Shall Be Of Modern Design And Shall Be Constructed In Accordance With The Best Practices Of The Sefa 8 Industry Standards. B. Each Cabinet Shall Be Complete So That Units Can Be Relocated At Any Subsequent Time Without Requiring Field Application Of Finished Ends Or Other Such Parts. 2. Steel Gauges: Gauges Of Steel Used In Construction Of Cases Shall Be 18 Gauge, Except As Follows: A. Leveling Bolt Reinforcements 12 Gauge. B. Top And Intermediate Front Horizontal Rails, Apron Rails, Hinge Reinforcements, And Reinforcement Gussets, 16 Gauge. C. Drawer Assemblies, Door Assemblies, Bottom, Bottom Back Rail, Toe Space Rail, And Adjustable Shelves, 20 Gauge. b. Base Cabinets: 1. The Cabinets Construction Must Meet Sefa 8 Standards And Shall Be Formed Into Not Less Than An L Formation At Top, Bottom, Back And A 3/4" Wide Front C Formation. c. Special Purpose Storage Cabinets: 1. Acid Storage Fume Hood Cabinets: Acid Storage Fume Hood Cabinets Shall Utilize The Same Gauges Of Steel And Construction Features As Other Base Cabinets Except They Shall Be Completely Lined With A One Piece Polyethylene Corrosion Resistant Liner According To The Sefa 8 Standards. 2. Solvent Storage Cabinets: Solvent Storage Cabinets Shall Be Specifically Designed For The Storage Of Flammable And Combustible Liquids. Construction Shall Be Based Upon The Requirements Listed By Ufc, Osha And Nfpa No. 30 1993, And Cabinets Shall Be Fm Approved And Labeled. The Bottoms, Top, Sides And Doors Shall Be Fabricated Of 18 Gauge Steel And Shall Be All Double Panel Construction With A 1 1/2" Air Space Between Panels. The Cabinet Shall Be Labeled: "flammable Keep Fire Away". 3. Vacuum Pump Cabinets: Vacuum Pump Cabinets Shall Utilize The Sefa 8 Standards For Construction. Each Cabinet Shall Be Furnished With A 1½" Diameter Pvc Vent Pipe In The Back For Venting Or Access To The Fume Hood Above. d. Upper Cabinet Construction: 1. Upper Cabinets Shall Meet The Sefa 8 Standards. 2. Solid Panel Doors Shall Consist Of An Inner And Outer Door Pan. The Door Assembly Shall Be 3/4" Thick And Contains Sound Deadening Material. 3. Sliding Doors Shall Be Suspended From The Top In A Roll Formed Steel Track Fastened To The Cabinet Top And Shall Glide On Nylon Rollers. Track Shall Be So Designed To Prevent Accidental Removal Of Doors. 4. Swinging Doors Over 36" High Shall Be Hung On Three Or More Hinges. 5. Plate Glass Doors Shall Operate Based On Sefa 8 Standards. e. Steel Full Height Cabinet Construction: 1. Full Height Storage Cabinets Shall Have A Finished Interior Same As Exterior. 2. Cabinet Tops Shall Be Formed Into A Channel Shape At Front With Flange At Rear And Sides For Electro-welding Cabinet Top To Cabinet Back And Ends. 3. Solid Panel Doors Shall Consist Of Inner And Outer Pan Formations Mechanically Assembled After Painting And Comply With Sefa 8 Standards. 4. Swinging Doors Over 36" High Shall Be Hung On Three Hinges. performance Requirements a. Steel Casework Construction Performance: 1. Base Cabinets Shall Be Constructed To Support At Least A Uniformly Distributed Load 200 Pounds Per Square Foot Of Cabinet Top Area, Including Working Surface Without Objectionable Distortion Of Interference With Door And Drawer Operation. b. Steel Paint System Finish And Performance Specification: 1. Steel Paint System Finish: After Cold Rolled Steel And Textured Steel Component Parts Have Been Completely Welded Together And Before Finishing, They Shall Be Given A Pre Paint Treatment To Provide To The Finish System To The Steel And To Aid In The Prevention Of Corrosion. The Completed Finish System In Standard Colors Shall Meet The Performance Test Requirements Specified Under Performance Test Results. 2. Performance Test Results: The Surfaces Must Perform And Withstand Chemical Corrosion Based On Sefa Standard For Chemical Spot Tests; The Surface Must Withstand A Certain Level Of Heat According To Sefa 8 Standard For Heat Resistance; The Surface Must Withstand A Certain Level Of Impact According To Sefa 8 Standard For Impact Resistance; The Surface 18 Gauge Steel Strip Must Withstand A Certain Level Of Bending According To Sefa 8 Standard For The Bending Test; The Surface Coating Must Past The Astm D2197 68 “standard Method Of Test For Adhesion Of Organic Coatings"; The Surface Paint Film Hardness Shall Meet Industry The Sefa Standard For The Hardness Test. work Surfaces tops , Sinks, And Cupsinks Surfaces Are To Meet The Sepa 8 Standards. the Contractor Shall Provide: 1. Delivery And Installation Services To Ensure Proper Placement And Integration With Existing Infrastructure. 2. Maintenance Support, Including Access To Spare Parts, Troubleshooting Assistance, And Technical Support During Normal Business Hours. 3. Detailed Product Documentation And Training Materials To Assist Laboratory Staff With Casework Operation And Maintenance. Training Materials May Be Tailored To Suit The Specific Needs Of Nih Laboratories. the Government Anticipates Awarding A Firm Fixed Price Purchase Order, After Solicitation For This Requirement. delivery /installation Location: hamilton, Mt 59840 capability Statement/information Sought all Capable Vendors Should Respond With A Brief Capability Statement By January 17, 2025 At 10:00 Am Est. The Capability Statement Must Include The Ability To Provide The Required Brand Name Or Equal Products, As Per Specifications, And That Are Compatible With The Innovative Laboratory Casework System. Capability Statement Must Include Place Of Manufacturer As Per Executive Order 14005-ensuring The Future Is Made In All Of America By All Of America's Workers. “buy America” Or “buy American,” That Require, Or Provide A Preference For, The Purchase Or Acquisition Of Goods, Products, Or Materials Produced In The United States, Including Iron, Steel, And Manufactured Goods Offered In The United States”. if Your Organization Has The Potential Capacity To Support This Requirement, Please Provide The Following Information: 1) Organization Name, Address, Point Of Contact, Email Address, Website Address, Telephone Number, Uei Number And Size And Type Of Ownership For The Organization; And 2) Respondents Shall Indicate If They Are The Manufacturer Or The Distributor Of The Required Laboratory Casework System And Shall Include Basic Information On Product Specifications. If An Equal Product Is Recommended (not Specific To The Brand Proposed) Then Sufficient Details Shall Be Provided By The Respondent Describing How The Equal Product Being Recommended, Meets The Minimum Specifications Of The Requirement. capability Statements Should Also Include Documentation Indicating That Offerors Business Size As Determined By The Small Business Administration’s Table Of Size Standards Located At: (https://www.sba.gov/content/small-business-size-standards) For Naics 337127. This Sba Size Standard Is Currently 1250 Employees But Is Subject To Change. Prospective Offerors May Also Note Whether They Meet Any Other Socio-economic Business Categories Such As 8(a), Hub-zone, Or Service-disabled Veteran When Submitting Their Capability Statement. submission Instructions interested Businesses Who Consider Themselves Qualified To Provide The Above-listed Items Are Invited To Submit A Response To This Sources Sought Notice By January 17, 2025 At 10:00 Am Est. All Responses Under This Sources Sought Notice Must Be Submitted All Responsible Sources That Could Provide Comparable Services May Submit A Capability Statement. All Required Documents Must Be Submitted Via The Niaid Electronic Simplified Acquisition Submission System (esass) Website At Https://esass.nih.gov By January 17, 2024 10:00 Am. All Vendors Must Register In The Esass System To Submit Their Documentation. Instructions On How To Register /submit Documents Are Included On The Website. All Responses Received By The Closing Date Of This Synopsis Will Be Considered By The Government. disclaimer And Important Notes this Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. The Government Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. Any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization’s Qualifications To Perform The Work. Respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. After A Review Of The Responses Received, A Pre-solicitation Synopsis And Solicitation May Be Published In Federal Business Opportunities. However, Responses To This Notice Will Not Be Considered Adequate Responses To A Solicitation. confidentiality no Proprietary, Classified, Confidential, Or Sensitive Information Should Be Included In Your Response. The Government Reserves The Right To Use Any Non-proprietary Technical Information In Any Resultant Solicitation(s).

Details: Description 2 Request For Quotation (rfq) Mobile Workstation Rfq No. Emb-pgss-2024-12-249 1. The Department Of Environment And Natural Resources – Environmental Management Bureau (denr-emb) Hereinafter Referred To As The “purchaser” Now Requests For Submission Of Price Quotations For The Procurement Of The Aforesaid Items Described In The Technical Specifications/scope Of Works/terms Of Reference. No. Description Qty Uom Unit Price Abc 1. Mobile Workstation 1 Unit 200,000.00 200,000.00 Operating System: 64-bit Microsoft ® Windows® 11 And Windows 10 Version 1809 Or Above Processor: Basic (2.5-2.9 Ghz Processor With 8 Logical Cores (base) Arm Processors Are Not Supported. Recommended (3+ Ghz Processor (base), 4+ Ghz (turbo)) Memory: Basic (8gb); Recommended (32gb) Display Resolution: (conventional Displays: 1920 X 1080 With True Color; High Resolution & 4k Displays: Resolution Upto 3840 X 2160 (with "recommended" Display Card) Display Card: Basic (2gb Gpu With 29 Gb/s Bandwidth And Directx 11 Compliant); Recommended (8 Gb Gpu With 106 Gb/s Bandwidth And Directx 12 Compliant Disk Space: 10.0 Gb (suggested Ssd) Pointing Device: Ms-mouse Compliant .net Framework: .net 8 Mobile Workstation Must Be Compatible And Work Efficiently With Autocad 2025. Must Meet The Minimum System Requirements Of Autocad 2025 Additional Requirements For Large Datasets, Point Clouds, And 3d Modelling Memory: 32gb Ram Or More Disk Space: 6gb Free Hard Disk Available, Not Including Installation Requirements Display Card: 3840 X 2160 (4k) Or Greater True Color Video Display Adapter; 12gb Vram Or Greater; Pixel Shader 3.0 Or Greater; Directx- Capable Workstation Class Graphics Card Autocad Toolset Requirements (additional Requirements) Autocad Map 3d: Disk Space: 20gb; Memory: Basic (16gb), Recommended (32gb) Autocad Electrical: Disk Space: 20gb; Memory: Basic (16gb); Recommended (32gb); Microsoft Access Database Engine 2016 Redistributable (x64)(16.0.5044.1000) Or Later, Unless Microsoft Office 2016 (x64) Or Later Is Already Installed. Installation On Systems With 32-bit Microsoft Office/365 Applications Is Not Supported Autocad Architecture: Disk Space: 20gb; Memory: Basic (16gb); Recommended (32gb) Autocad Mep: Disk Space: 21gb; Memory: Basic (16gb); Recommended (32gb) Autocad Plant 3d: Disk Space: 12gb; Memory: Recommended For 3d Modeling (32gb) Autocad Mechanical: Disk Space: 12gb; Memory: Basic (16gb); Recommended (32gb) Autocad Raster Design: Disk Space: 1gb Fdo Provider Requirements Microsoft Sql Server: Microsoft Sql Server 2019 Standard And Enterprise Editions; Microsoft Sql Server 2022 Standard And Enterprise Editions Oracle 12c Release 2: Oracle 12.2.0.1.0 Enterprise Edition And Standard Edition 2 Oracle 19c: Oracle 19.3 Enterprise Edition And Standard Edition 2 Oracle 21c: Oracle 21.3 Enterprise Edition And Standard Edition 2 Raster: Dem, Jpg2k, Dted, Mrsid® , Ecw, Png, Esri® Grid, Tiff, Jpeg, Esri® Ascii Autodesk Sdf: 3.0 Esri Arcgis: Arcgis® 10.8.2 ; Arcgis 10.7.1 Mysql: 8.0 Odbc: The Fdo Odbc Provider Has Been Tested With Corresponding Versions Of Odbc Drivers That Are Shipped With The Relevant Supported Operating Systems Version Ogc Wms: Wms 1.3.0 Ogc Wmts: Wtms 1.0.0 Ogc Wfs: Wfs 2.0.0 Sqlite: Sqlite 3.27.2 Postgresql: Postgresql 15.4 + Postgis 3.4 2. A Set Of Technical Requirements Are Provided In Attachment/s. Item/s Listed Under The Purchaser’s Terms Of Reference/s Must Be Complied With On A Pass-fail Basis. Failure To Meet Any One Of The Requirements May Result In Rejection Of The Quotation. The Approved Budget For This Contract Is Php200,000.00. 3. Bidding Procedures Will Be Conducted In Accordance With The Provisions Of The Implementing Rules And Regulations (irr) Of Republic Act 9184. 4. It Is The Intent Of The Purchaser To Evaluate The Bid/quotation On A Lot Basis Whichever Is Advantageous To The Government. And Award Will Be Made To The Bid/quotation Or Combination Of Quotations Resulting In The Lowest Evaluated Quotation Meeting The Purchaser’s Technical Specifications. 5. Quotations Must Be Delivered At The Address Below Not Later Than Of 02:00 P.m. Of January 22, 2025. Department Of Environment And Natural Resources Environmental Management Bureau Emb Hrd Building Ground Floor, Afmd Denr Compound, Visayas Avenue, Diliman, Quezon City 6. Prices Must Be Quoted In Philippine Peso And Must Include The Unit Price And Total Price, Inclusive Of All Taxes To Be Paid And Other Incidental Cost To The Delivery Site/s If The Contract Is Awarded. 7. Bid/quotation Submission Maybe Typewritten And Must Be Placed In A Sealed Envelope Marked Mobile Workstation Under Rfq No. Emb-pgss-2024-12-249 Sealed Bids Must Be Forwarded To Bac Secretariat (administrative, Financial And Management Division) Located At Emb-afmd, Hrd Building Ground Floor Or May Email To Embquotations@gmail.com Submission Must Be Or On Before The Indicated Date At Time. Late Bids And Proposals Above The Abc Shall Be Automatically Disqualified. 8. Bids/quotations Shall Be Valid For Sixty (60) Calendar Days From The Deadline Of Submission Of Bids. 9. The Delivery Period Shall Be Within Fifteen To Thirty (15-30) Calendar Days From Receipt Of The Purchase Order (po) And/or Job Order (jo). The Supplier Must Inform The Purchaser At Least Three (3) Days Before The Date Of Delivery. The Delivery Will Be Made Only During Working Days And Hours. 10. Delivery Sites: See Delivery Sites Enumerated In The Quotation Form Environmental Management Bureau Hrd Building Ground Floor Denr Compound, Visayas Avenue, Diliman, Quezon City Attention: Afmd-property And General Services Section 11. The Applicable Rate For Late Deliveries Is One Tenth (1/10) Of One (1) Percent Of The Cost Of The Unperformed Portion Of The Contract For Every Day Of Delay. The Maximum Deduction Shall Be Ten Percent (10%) Of The Amount Of Contract. Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Contract Amount, The Purchaser Shall Rescind The Contract Without Prejudice To Other Courses Of Action And Remedies Open To It. 12. The Purchaser Reserves The Right To Accept Or Reject Any Quotation, And To Annul The Bidding/shopping Process Or Reject All Quotations At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder/bidders. The Purchaser Also Reserves The Right To Waive Minor Deviations/defects Or Infirmities Therein. A Minor Deviation/defect Or Infirmity Is One That Does Not Materially Affect The Overall Functionality Of The Material And The Capability Of The Supplier To Perform The Contract. 13. Participating Service Provider/s Must Abide By The Existing Health, Safety, Environment, Quality And Other Related Laws And Procedures As Prescribed By The Philippine Government. 14. Documents To Submit The Following: A) Quotation Form With Technical Specifications. B) Mayor’s/business Permit. C) Philgeps Registration Number/proof Of Philgeps Registration D) Tax Clearance Or Annual Income Tax Returns E) Omnibus Sworn Statement-original & Notarized Engr. Rodney V. Diaz Oic-property & General Services Section Attachment 1 Republic Of The Philippines Department Of Environment And Natural Resources Environmental Management Bureau Technical Specifications Item No. 1 Mobile Workstation Quantity: 1 Unit Country Of Origin: Brand/model: All Items Listed Under The Purchasers’ Specifications Must Be Complied On A Pass-fail Basis. Failure To Meet Any One Of The Requirements May Result To Rejection. Qty Uom Purchaser’s Specifications Bidder’s Specifications 1 Unit Mobile Workstation Operating System: 64-bit Microsoft ® Windows® 11 And Windows 10 Version 1809 Or Above Processor: Basic (2.5-2.9 Ghz Processor With 8 Logical Cores (base) Arm Processors Are Not Supported. Recommended (3+ Ghz Processor (base), 4+ Ghz (turbo)) Memory: Basic (8gb); Recommended (32gb) Display Resolution: (conventional Displays: 1920 X 1080 With True Color; High Resolution & 4k Displays: Resolution Upto 3840 X 2160 (with "recommended" Display Card) Display Card: Basic (2gb Gpu With 29 Gb/s Bandwidth And Directx 11 Compliant); Recommended (8 Gb Gpu With 106 Gb/s Bandwidth And Directx 12 Compliant Disk Space: 10.0 Gb (suggested Ssd) Pointing Device: Ms-mouse Compliant .net Framework: .net 8 Mobile Workstation Must Be Compatible And Work Efficiently With Autocad 2025. Must Meet The Minimum System Requirements Of Autocad 2025 Additional Requirements For Large Datasets, Point Clouds, And 3d Modelling Memory: 32gb Ram Or More Disk Space: 6gb Free Hard Disk Available, Not Including Installation Requirements Display Card: 3840 X 2160 (4k) Or Greater True Color Video Display Adapter; 12gb Vram Or Greater; Pixel Shader 3.0 Or Greater; Directx- Capable Workstation Class Graphics Card Autocad Toolset Requirements (additional Requirements) Autocad Map 3d: Disk Space: 20gb; Memory: Basic (16gb), Recommended (32gb) Autocad Electrical: Disk Space: 20gb; Memory: Basic (16gb); Recommended (32gb); Microsoft Access Database Engine 2016 Redistributable (x64)(16.0.5044.1000) Or Later, Unless Microsoft Office 2016 (x64) Or Later Is Already Installed. Installation On Systems With 32-bit Microsoft Office/365 Applications Is Not Supported Autocad Architecture: Disk Space: 20gb; Memory: Basic (16gb); Recommended (32gb) Autocad Mep: Disk Space: 21gb; Memory: Basic (16gb); Recommended (32gb) Autocad Plant 3d: Disk Space: 12gb; Memory: Recommended For 3d Modeling (32gb) Autocad Mechanical: Disk Space: 12gb; Memory: Basic (16gb); Recommended (32gb) Autocad Raster Design: Disk Space: 1gb Fdo Provider Requirements Microsoft Sql Server: Microsoft Sql Server 2019 Standard And Enterprise Editions; Microsoft Sql Server 2022 Standard And Enterprise Editions Oracle 12c Release 2: Oracle 12.2.0.1.0 Enterprise Edition And Standard Edition 2 Autocad Architecture: Disk Space: 20gb; Memory: Basic (16gb); Recommended (32gb) Autocad Mep: Disk Space: 21gb; Memory: Basic (16gb); Recommended (32gb) Autocad Plant 3d: Disk Space: 12gb; Memory: Recommended For 3d Modeling (32gb) Autocad Mechanical: Disk Space: 12gb; Memory: Basic (16gb); Recommended (32gb) Autocad Raster Design: Disk Space: 1gb Fdo Provider Requirements Microsoft Sql Server: Microsoft Sql Server 2019 Standard And Enterprise Editions; Microsoft Sql Server 2022 Standard And Enterprise Editions Oracle 12c Release 2: Oracle 12.2.0.1.0 Enterprise Edition And Standard Edition 2 Ogc Wms: Wms 1.3.0 Ogc Wmts: Wtms 1.0.0 Ogc Wfs: Wfs 2.0.0 Sqlite: Sqlite 3.27.2 Postgresql: Postgresql 15.4 + Postgis 3.4 Name Of Company : _________________________________ Postal Address : _________________________________ Email Address : _________________________________ Telephone & Fax No. : _________________________________ Signature Over Printed Name : _________________________________ Designation : _________________________________ Other Requirements 1. Quotation Submission Requirements - Supplier Must Submit A Duly Accomplished And Signed Price Quotation, And Supplier’s Line By Line Technical Specifications Compliance. - Supplier’s Must Accomplish/fill All Required Pages To Facilitate Documentation - Supplier Must Be Philgeps Registered. - Business Permit/license Permit - Failure To Follow The Above Requirements May Result To Outright Rejection Of Submitted Quotation/s. 2. Evaluation And Awarding Of Quotation - The Purchaser Will Evaluate And Compare The Offers, Which Have Been Determined As Responsive Pursuant To The Completeness Of The Purchaser Requirements - Compliance To The Technical Specifications - Awards Shall Be Made To The Lowest Evaluated And Responsive Quotation. - Submission Of Requirements Containing False Information Or Falsified Documents That Contain False Information Or Concealment Of Such Information In Order To Influence The Outcome Of Eligibility Screening Or Any Other Stage Of The Procurement Process May Result To Blacklisting Guidelines As Provided In The Irr Of Ra 9184. 3. Terms Of Payment - 100% Of The Contract Price Will Be Paid Upon Verification/inspection And Acceptance Of The Services In Compliance To Existing Government Auditing And Accounting Procedures. Quotation Form Date: ____________________ Attention: Afmd-property And General Services Section Environmental Management Bureau Hrd Building Ground Floor, Afmd Denr Compound, Visayas Avenue, Diliman, Quezon City 1) Having Examined The Subject Request For Quotation (rfq) Including The Technical Specifications, We, The Undersigned Offer To Supply And Deliver The Following: No. Description Delivery Site Quantity Uom Unit Price Total Price Mobile Workstation Environmental Management Bureau, Hrd Building Ground Floor, Afmd Denr Compound, Visayas Avenue, Diliman, Quezon City 1 Unit Operating System: 64-bit Microsoft ® Windows® 11 And Windows 10 Version 1809 Or Above Processor: Basic (2.5-2.9 Ghz Processor With 8 Logical Cores (base) Arm Processors Are Not Supported. Recommended (3+ Ghz Processor (base), 4+ Ghz (turbo)) Memory: Basic (8gb); Recommended (32gb) Display Resolution: (conventional Displays: 1920 X 1080 With True Color; High Resolution & 4k Displays: Resolution Upto 3840 X 2160 (with "recommended" Display Card) Display Card: Basic (2gb Gpu With 29 Gb/s Bandwidth And Directx 11 Compliant); Recommended (8 Gb Gpu With 106 Gb/s Bandwidth And Directx 12 Compliant Disk Space: 10.0 Gb (suggested Ssd) Pointing Device: Ms-mouse Compliant .net Framework: .net 8 Mobile Workstation Must Be Compatible And Work Efficiently With Autocad 2025. Must Meet The Minimum System Requirements Of Autocad 2025 Additional Requirements For Large Datasets, Point Clouds, And 3d Modelling Memory: 32gb Ram Or More Disk Space: 6gb Free Hard Disk Available, Not Including Installation Requirements Display Card: 3840 X 2160 (4k) Or Greater True Color Video Display Adapter; 12gb Vram Or Greater; Pixel Shader 3.0 Or Greater; Directx- Capable Workstation Class Graphics Card Autocad Toolset Requirements (additional Requirements) Autocad Map 3d: Disk Space: 20gb; Memory: Basic (16gb), Recommended (32gb) Autocad Electrical: Disk Space: 20gb; Memory: Basic (16gb); Recommended (32gb); Microsoft Access Database Engine 2016 Redistributable (x64)(16.0.5044.1000) Or Later, Unless Microsoft Office 2016 (x64) Or Later Is Already Installed. Installation On Systems With 32-bit Microsoft Office/365 Applications Is Not Supported Memory: 32gb Ram Or More Disk Space: 6gb Free Hard Disk Available, Not Including Installation Requirements Display Card: 3840 X 2160 (4k) Or Greater True Color Video Display Adapter; 12gb Vram Or Greater; Pixel Shader 3.0 Or Greater; Directx- Capable Workstation Class Graphics Card Autocad Toolset Requirements (additional Requirements) Autocad Map 3d: Disk Space: 20gb; Memory: Basic (16gb), Recommended (32gb) Autocad Electrical: Disk Space: 20gb; Memory: Basic (16gb); Recommended (32gb); Microsoft Access Database Engine 2016 Redistributable (x64)(16.0.5044.1000) Or Later, Unless Microsoft Office 2016 (x64) Or Later Is Already Installed. Installation On Systems With 32-bit Microsoft Office/365 Applications Is Not Supported Autocad Architecture: Disk Space: 20gb; Memory: Basic (16gb); Recommended (32gb) Autocad Mep: Disk Space: 21gb; Memory: Basic (16gb); Recommended (32gb) Autocad Plant 3d: Disk Space: 12gb; Memory: Recommended For 3d Modeling (32gb) Autocad Mechanical: Disk Space: 12gb; Memory: Basic (16gb); Recommended (32gb) Autocad Raster Design: Disk Space: 1gb Fdo Provider Requirements Microsoft Sql Server: Microsoft Sql Server 2019 Standard And Enterprise Editions; Microsoft Sql Server 2022 Standard And Enterprise Editions Oracle 12c Release 2: Oracle 12.2.0.1.0 Enterprise Edition And Standard Edition 2 Ogc Wms: Wms 1.3.0 Ogc Wmts: Wtms 1.0.0 Ogc Wfs: Wfs 2.0.0 Sqlite: Sqlite 3.27.2 Postgresql: Postgresql 15.4 + Postgis 3.4 2) We Undertake, If Our Quotation Or Bid Is Accepted, To Deliver The Above Goods Within The Fifteen To Thirty (15-30) Calendar Day Delivery Period From Receipt Purchase Order (po) Or Job Order (jo). 3) We Agree To Abide By This Quotation/bid For A Period Of Sixty (60) Days After The Deadline Of Submission Specified In The Rfq. 4) We Understand That Payment For Items Delivered Will Be Made To The Winning Supplier After The Inspection And Acceptance Of Goods Delivered. Name Of Company : _________________________________ Postal Address : _________________________________ Email Address : _________________________________ Telephone & Fax No. : _________________________________ Signature Over Printed Name : _________________________________ Designation : _________________________________ Omnibus Sworn Statement (revised) [shall Be Submitted With The Bid] _________________________________________________________________________ Republic Of The Philippines) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct. 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted. 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree. [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree. [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ________ And His/her Community Tax Certificate No. _______ Issued On ____ At ______. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued] Doc. No. _____ Page No. _____ Book No. _____ Series Of _____

Description: Sources Sought Notice important: Read This Notice In Its Entirety Before Responding. Services Are Sporadic And No Routine Schedule Or Quantity Can Be Firmly Identified the Department Of Veterans Affairs (va), Network Contracting Office (nco) 23, On Behalf Of The Sioux Falls Sd Va Hospital, Is Seeking Information And Potential Sources For Onsite Licensed General Surgeon Gastroenterology Services. The Period Of Performance Will Be For One Year And Includes Four (4) One-year Option Periods. the Contractor Shall Provide Onsite Licensed General Surgeon Gastroenterology Services In Accordance With The Terms, Conditions, And Specifications Contained Herein To Beneficiaries Of The Department Of Veteran Affairs (va), Sioux Falls Va Health Care System (vahcs). The Total Number Of Hours Required Is 416 Hours Annually. Services May Be Required On A 24-hour Per Day, Seven Days Per Week Basis, Including Holidays And Weekends. On Call Services May Be Required. See Attached Performance Work Statement (pws) For Additional Information. the Naics For This Requirement Is 561320 Temporary Help Services, Which Has A Small Business Size Standard Of $34.0 Million. It Is The Intent Of The Va To Issue A Single Award, Firm Fixed Price Contract. this Is A Sources Sought Notice Only. This Sources Sought Notice Will Be Used To Obtain Information Regarding The Provision Of F Onsite Licensed General Surgeon Gastroenterology Services From Potential Vendors, Identify Potential Vendors That Would Be Interested And Capable Of Providing Onsite Licensed General Surgeon Gastroenterology Services Within The Requested Timeframe, And To Assist The Contracting Officer In Making A Set-aside Determination. This Source Sought Notice And Any Responses Are For Market Research Purposes Only And Shall Not Be Considered An Obligation On The Part Of The Government To Acquire Any Services. this Source Sought Notice Is Not A Solicitation, And No Contractual Arrangement Will Be Made As A Result. Vendors Are Advised That No Entitlement To Payment Of Direct Or Indirect Costs Or Charges By The Government Will Arise Because Of A Contractor Submission To This Sources Sought Notice Or The Government's Use Of Such Information. All Costs Associated With Responding To This Sources Sought Notice Are Solely At The Responding Vendors Expense. The Government Reserves The Right To Reject, In Whole Or In Part, Any Vendor's Input Resulting From This Sources Sought Notice. Information Submitted In Response To This Sources Sought Notice Will Not Be Returned. all Submitted Information Should Be Unclassified Or Non-proprietary. Vendors Are Solely Responsible For Properly Marking And Clearly Identifying Any Proprietary Information Or Trade Secrets Contained With Its Response. The Government Will Not Be Liable For Or Suffer Any Consequential Damages For Any Proprietary Information Not Properly Marked And Clearly Identified. by Responding To This Sources Sought Notice, The Vendor Provides The Government Permission To Share Its Submitted Capabilities And Contact Information With Other Government Organizations In Relationship To Similar Requirements For Market Research Purposes. To Be Considered Complete, Responses To This Sources Sought Notice Shall Include The Information Below. provide A Brief Description Of The Company Background, Experience In Providing Onsite Licensed General Surgeon Gastroenterology Services As The Prime Contractor/subcontractor, Socioeconomic Status, Past Performance With Government Contracts, And Contractor Sam Uei Number. indicate If Subcontractors/partners Be Used For Any Part Of The Delivery Of Onsite Licensed General Surgeon Gastroenterology Services? If Yes, Specify The Duties Of The Prime Contractor And Any Subcontractors/partners. if Company Is A Veteran And/or Small Business, Indicate If Able To Comply With The Limitations On Subcontracting At 13 Cfr 125.6, Which States That For Services A Small Business Concern Must Agree That It Will Not Pay More Than 50% Of The Amount Paid By The Government To It To Firms That Are Not Similarly Situated. include Copy Of Small Business Administration Verification At Veteran Small Business Certification (sba.gov) If Claiming Veteran-owned Small Business Or Service-disabled Veteran-owned Small Business Socioeconomic Status As Prime Contractor Or For Any Subcontractors/partners. provide A Copy Of Current Certificate Of Liability Insurance In Vendor S Name. all Interested Parties, Regardless Of Socioeconomic Status, Capable Of Providing The Required Onsite Licensed General Surgeon Gastroenterology Services Above Shall Submit A Response Via Email To The Contracting Specialist At Tina.bernad@va.gov No Later Than January 3, 2025, 11:00 A.m. Central Time. performance Work Statement onsite General Surgeon Gastroenterology Services general: services Provided: The Contractor Shall Provide Board Certified/board Eligible General Surgery Physician Services Onsite In Accordance With The Specifications Contained Herein To Beneficiaries Of The Va And The Royal C. Johnson Veterans Memorial Hospital (sioux Falls Va). place Of Performance: Contractor Shall Furnish Services At The Royal C. Johnson Veterans Memorial Hospital (sioux Falls Va), 2501 W 22nd St, Sioux Falls, Sd 57105. authority: Title 38 Usc 8153, Health Care Resources (hcr) Sharing Authority. Remember To Identify The Federal Acquisition Regulation (far) Parts Used (far 12 In Combination With 13, 15 And/or Va Acquisition Regulation (vaar) Part 873) policy/directives/handbooks. The Contractor Shall Be Subject To The Following Policies, Including Any Subsequent Updates During The Period Of Performance. The Policies Listed Below Can Be Accessed Electronically At The Following: Va Publications Vha Publications va Directive 1663: Health Care Resources (hcr) Contracting Buying Title 38 U.s.c. 8153 1.4.2. Vha Directive 1003.04: Vha Patient Advocacy vha Directive 1065: Productivity And Staffing Guidance For Specialty Provider Group Practice vha Directive 1088(1): Communicating Test Results To Providers And Patients vha Directive 1100.18: Reporting And Responding To State Licensing Boards vha Directive 1100.20: Credentialing Of Health Care Providers vha Directive 1100.21: Privileging vha Directive 1192.01: Seasonal Influenza Vaccination Program For Vha Health Care Personnel vha Directive 1220(1): Facility Procedure Complexity Designation Requirements To Perform Invasive Procedures In Any Clinical Setting vha Directive 1400.01: (not Applicable, Please Remove) vha Directive 1605.01: Privacy And Release Of Information vha Directive 1907.01: Vha Health Information Management And Health Records vha Handbook 1100.17: National Practitioner Data Bank (npdb) Reports vha Handbook 1400.04: (not Applicable, Please Remove) privacy Act Of 1974 (5 U.s.c. 552a) As Amended: Http://www.justice.gov/oip/foia_updates/vol_xvii_4/page2.htm acronyms/definitions: Terms Used In This Contract Shall Be Interpreted As Follows Unless The Context Expressly Requires A Different Construction And/or Interpretation. In Case Of A Conflict In Language Between The Definitions And Other Sections Of This Contract, The Language In This Section Shall Govern. abs: American Board Of Surgery Http://www.absurgery.org/ acgme: Accreditation Council For Graduate Medical Education acls: Advanced Cardiac Life Support ajic: American Journal For Infection Control aql: Acceptable Quality Level baa: Business Associate Agreement bba: Balanced Budget Act bls: Basic Life Support cdc: Centers For Disease Control And Prevention cdr: Contract Deficiency Report ceu: Certified Education Unit clinical Privileging: Clinical Privileging Is The Process By Which A Practitioner, Licensed For Independent Practice; E.g., Without Supervision, Direction, Required Sponsor, Preceptor, Mandatory Collaboration, Etc.; Is Permitted By Law And The Facility To Practice Independently, To Provide Specific Medical Or Other Patient Care Services Within The Scope Of The Individual S License, Based Upon The Individual S Clinical Competence As Determined By Peer References, Professional Experience, Health Status, Education, Training And Licensure. Clinical Privileges Must Be Facility-specific And Provider-specific, And Within Available Resources. cme: Continuing Medical Education cmp: Civil Monetary Penalty cms: Centers For Medicare And Medicaid Services co: Contracting Officer: The Person Executing This Contract On Behalf Of The Government With The Authority To Enter Into And Administer Contracts And Make Related Determinations And Findings. coi: Conflict Of Interest cor: Contracting Officer S Representative: A Person Appointed By The Co To Take Necessary Action To Ensure The Contractor Performs In Accordance With And Adheres To The Specifications Contained In The Contract And To Protect The Interest Of The Government. The Cor Shall Report To The Co Promptly Any Indication Of Non-compliance In Order That Appropriate Action Can Be Taken. cos: Chief Of Staff cpars: Contractor Performance Assessment Reporting System credentialing: Credentialing Is The Process Of Obtaining, Verifying, And Assessing The Qualifications Of A Health Care Provider To Provide Care Or Services In Or For The Va Health Care System. Credentials Are Documented Evidence Of Licensure, Education, Training, Experience Or Other Qualifications. dea: Drug Enforcement Agency ehr: Electronic Health Record - Electronic Health Record System Used By The Va epa: Environmental Protection Agency fapiis: Federal Awardee Performance And Integrity Information System far: Federal Acquisition Regulation foia: Freedom Of Information Act fppe: Focused Provider Practice Evaluation fsmb: Federation Of State Medical Boards fte: Full Time Equivalent: Va S Standard Definition Is For Full Time Working The Equivalent Of 80 Hours Every Two Weeks, 2080 Hours Per Year.  however, Providers May Propose Using Their Standard Fte Definition. hhs: Department Of Health And Human Services hicpac: Hospital Infection Practices Advisory Committee hipaa: Health Insurance Portability And Accountability Act igra: Interferon-gamma Release Assays iso: Information Security Officer key Personnel: The Individuals Specified In This Contract Who Are Essential To Work Performance. mri: Magnetic Resonance Imaging mst: Military Sexual Trauma npi: National Provider Identifier. Npi Is A Standard, Unique 10-digit Numeric Identifier Required By Hipaa. The Vha Must Use Npis In All Hipaa-standard Electronic Transactions For Individual (health Care Practitioners) And Organizational Entities (medical Centers). nppes: National Plan And Provider Enumeration System nso: National Surgery Office ogc: Office Of General Counsel oig: Office Of Inspector General oppe: Ongoing Provider Practice Evaluation or: Operating Room pop: Period Of Performance ppd: Purified Protein Derivative ppirs: Past Performance Information Retrieval System pws: Performance Work Statement qa/qi: Quality Assurance/quality Improvement qm/pi: Quality Management/performance Improvement qasp: Quality Assurance Surveillance Plan rfp: Request For Proposal scs: Specialty Care Services ssac: Sole Source Affiliate Contract tjc: The Joint Commission tst: Tuberculosis Skin Test usc: United States Code va: Department Of Veterans Affairs va-fsc: Va Financial Services Center vaar: Va Acquisition Regulation vetpro: Is Vha S Mandatory Credentialing Software Platform To Document The Credentialing Of Vha Health Care Providers. This System Facilitates Completion Of A Uniform, Accurate And Complete Credentials File. vha: Veterans Health Administration vista: Veterans Integrated Systems Technology Architecture qualifications: staff/facility license: The Contractor S Physician(s) Assigned By The Contractor To Perform The Services Covered By This Contract Shall Have A Current License To Practice Medicine In Any State, Territory, Or Commonwealth Of The United States Or The District Of Columbia) When Services Are Performed Onsite On Va Property. all Licenses Held By The Key Personnel Working On This Contract Shall Be Full And Unrestricted Licenses. Contractor S Physician(s) Who Have Current, Full And Unrestricted Licenses In One Or More States, But Who Have, Or Ever Had, A License Restricted, Suspended, Revoked, Voluntarily Revoked, Voluntarily Surrendered Pending Action Or Denied Upon Application Will Not Be Considered For The Purposes Of This Contract. board Certification: All Contractor S Physician(s) Shall Be Board Certified/board Eligible By The Abs Http://www.absurgery.org/, And Be Currently Certified In Bls, Acls Or Equivalency. All Continuing Education Courses Required For Maintaining Certification Must Be Kept Up To Date At All Times. Documentation Verifying Current Certification Shall Be Provided By The Contractor To The Va Cor On An Annual Basis For Each Year Of Contract Performance. credentialing And Privileging: Credentialing And Privileging Is To Be Done In Accordance With The Provisions Of Vha Directive 1100.20 And Vha Directive 1100.21 Referenced Above. The Contractor Is Responsible To Ensure That Proposed Physician(s) Possesses The Requisite Credentials Enabling The Granting Of Privileges. No Services Shall Be Provided By Any Contractor S Physician(s) Prior To Obtaining Approval By The Facility Medical Executive Board And Medical Center Director. if A Contractor S Physician(s) And/or Other Contract Provider(s) Are Not Credentialed And Privileged Or Has Credentials/privileges Suspended Or Revoked, The Contractor Shall Furnish An Acceptable Substitute Without Any Additional Cost To The Government. technical Proficiency: Contractor S Physician(s) Shall Be Technically Proficient In The Skills Necessary To Fulfill The Government S Requirements, Including The Ability To Speak, Understand, Read And Write English Fluently. Contractor Shall Provide Documents Upon Request Of The Co/cor To Verify Current And Ongoing Competency, Skills, Certification And/or Licensure Related To The Provision Of Care, Treatment And/or Services Performed. Contractor Shall Provide Verifiable Evidence Of All Educational And Training Experiences Including Any Gaps In Educational History For All Contractor S Physician(s) And Contractor S Physician(s) Shall Be Responsible For Abiding By The Facility's Medical Staff By-laws, Rules, And Regulations (referenced Herein) That Govern Medical Staff Behavior. continuing Medical Education (cme)/ Certified Education Unit (ceu) Requirements: Contractor Shall Provide The Cor Copies Of Current Cmes As Required Or Requested By The Facility. Contractor S Physician(s) Registered Or Certified By National/medical Associations Shall Continue To Meet The Minimum Standards For Cme To Remain Current. Contractor Shall Report Cme Hours To The Credentials Office For Tracking. These Documents Are Required For Both Privileging And Re-privileging. Failure To Provide Shall Result In Loss Of Privileges For Contractor S Physician(s). training (acls, Bls, Ehr And Va Mandatory): Contractor Shall Meet All Va Educational Requirements And Mandatory Course Requirements Defined Herein; All Training Must Be Completed By The Contractor S Physician(s) As Required By The Va. Other Training May Become Required. Va Will Communicate Any Changes To The Training Requirement To The Contractor. training frequency annual Hours acls/bls as Necessary To Maintain Certification. active Threat Training annually 30 Minutes blood Administration: Complication annually 30 Minutes ehr annually 2 Hours government Ethics annually 30 Minutes hospice And Palliative Care For Va Clinicians annually 30 Minutes military Sexual Trauma (mst) For Medical Providers annually 30 Minutes moderate Sedation In-service Training annually 30 Minutes pact Act 2022 Toxic Exposure Screening (tes) annually 30 Minutes patient Abuse annually 30 Minutes patient Rights annually 30 Minutes patient Safety annually 30 Minutes prevention/management Of Disruptive Behavior/violence Prevention Level I annually 30 Minutes prevention Of Workplace Harassment/no Fear Act annually 30 Minutes suicide Prevention: Suicide Risk Management Training For Clinicians annually 30 Minutes sux Infection Control And Blood Borne Pathogens annually 30 Minutes va Core Values Training (icare Recommitment) annually 30 Minutes va Privacy And Information Security Awareness And Rules Of Behavior annually 30 Minutes vha Mri Safety Training Level 1 Training (all Who Enter Mri Suites) annually 30 Minutes vha Privacy And Hipaa Focused Training annually 30 Minutes vista Imaging one Time 30 Minutes radiation Safety annually 30 Minutes standard Infection Control Measures (ppd, Immunizations, Etc.): Contractor Shall Provide Proof Of The Following For Physicians Within Five (5) Calendar Days After Contract Award And Prior To The First Duty Shift To The Cor And Co. Tests Shall Be Current Within The Past Year. tuberculosis Testing: Contractor Shall Provide Proof Of A Negative Tuberculosis Skin Test (tst) Or Interferon-gamma Release Assays (igra) For All Contractor S Physician(s) Upon Hire In Accordance With Cdc Guidance. (this Is Applicable To All Health Care Workers). A Negative Chest Radiographic Report For Active Tuberculosis Shall Be Provided In Cases Of Positive Tst Or Igra Results. measles, Mumps, & Rubella Testing: Contractors Shall Provide Proof Of Immunity For All Contractor Physicians {this Is Applicable To All Health Care Workers}. varicella: Contractors Shall Provide Proof Of Immunity For All Contractor Physicians {this Is Applicable To All Health Care Workers}. acellular Pertussis: Contractors Shall Provide Proof Of 1 Dose Of Tdap Vaccination For All Contractor Physicians {this Is Applicable To All Health Care Workers}. influenza: Contractors Shall Provide Proof That All Contractor Physicians Have Received The Annual Influenza Vaccine Unless It Is Contraindicated. If The Contractor Physician Has A Medical Contraindication To The Vaccine They Shall Be Required To Wear A Mask During The Influenza Season. {this Is Applicable To All Health Care Workers}. covid-19: Contractors Shall Comply With Vha Supplemental Contract Requirements For Combatting Covid-19 {this Is Applicable To All Health Care Workers}. See Section D Attachment. osha Regulation Concerning Occupational Exposure To Bloodborne Pathogens: Contractor Shall Provide Evidence Of Completing And Passing Generic Self-study Blood-borne Pathogen Training For All Contractor S Physician(s) {this Is Applicable To All Health Care Workers}; Provide Their Own Hepatitis B Vaccination Series And Hepatitisâ b Surface Antigen Test Resultsâ following The Hepatitis B Vaccination Series; Maintain An Exposure Determination And Control Plan; Maintain Required Records; And Ensure That Proper Follow-up Evaluation Is Provided Following An Exposure Incident. the Facility Shall Notify The Contractor Of Any Significant Communicable Disease Exposures As Appropriate. Contractor Shall Adhere To Current Cdc/hicpac Guideline For Infection Control In Health Care Personnel (as Published In American Journal For Infection Control - Ajic 1998; 26:289-354 Http://www.cdc.gov/hicpac/pdf/infectcontrol98.pdf) For Disease Control. Contractor Shall Provide Follow Up Documentation Of Clearance To Return To The Workplace Prior To Their Return. npi: Npi Is A Standard, Unique 10-digit Numeric Identifier Required By Hipaa. The Vha Must Use Npis In All Hipaa-standard Electronic Transactions For Individual (health Care Practitioners) And Organizational Entities (medical Centers). The Contractor Shall Have Or Obtain Appropriate Npi And If Pertinent The Taxonomy Code Confirmation Notice Issued By The Cms Nppes Be Provided To The Co With The Proposal. dea: Contractor Shall Provide Copy Of Current Dea Certificate. Conflict Of Interest (coi): The Contractor And All Contractor S Physician(s) Are Responsible For Identifying And Communicating To The Co And Cor Conflicts Of Interest At The Time Of Proposal And During The Entirety Of Contract Performance. At The Time Of Proposal, The Contractor Shall Provide A Statement Which Describes, In A Concise Manner, All Relevant Facts Concerning Any Past, Present, Or Currently Planned Interest (financial, Contractual, Organizational, Or Otherwise) Or Actual Or Potential Organizational Conflicts Of Interest Relating To The Services To Be Provided. The Contractor Shall Also Provide Statements Containing The Same Information For Any Identified Consultants Or Subcontractors Who Shall Provide Services. The Contractor Must Also Provide Relevant Facts That Show How It S Organizational And/or Management System Or Other Actions Would Avoid Or Mitigate Any Actual Or Potential Organizational Conflicts Of Interest. These Statements Shall Be In Response To The Vaar Provision 852.209-70 Organizational Conflicts Of Interest And Fully Outlined In Response To The Subject Attachment In Section D Of The Solicitation Document. citizenship Related Requirements: the Contractor Certifies That The Contractor Shall Comply With Any And All Legal Provisions Contained In The Immigration And Nationality Act Of 1952, As Amended; Its Related Laws And Regulations That Are Enforced By Homeland Security, Immigration And Customs Enforcement And The U.s Department Of Labor As These May Relate To Non-immigrant Foreign Nationals Working Under Contract Or Subcontract For The Contractor While Providing Services To Va Patient Referrals. while Performing Services For The Va, The Contractor Shall Not Knowingly Employ, Contract Or Subcontract With An Illegal Alien; Foreign National Non-immigrant Who Is In Violation Their Status, As A Result Of Their Failure To Maintain Or Comply With The Terms And Conditions Of Their Admission Into The United States. Additionally, The Contractor Is Required To Comply With All E-verify Requirements Consistent With Executive Order 12989 And Any Related Pertinent Amendments, As Well As Applicable Far. if The Contractor Fails To Comply With Any Requirements Outlined In The Preceding Paragraphs Or Its Agency Regulations, The Va May, At Its Discretion, Require That The Foreign National Who Failed To Maintain Their Legal Status In The United States Or Otherwise Failed To Comply With The Requirements Of The Laws Administered By Homeland Security, Immigration And Customs Enforcement And The U.s Department Of Labor, Shall Be Prohibited From Working At The Contractor S Place Of Business That Services Va Patient Referrals; Or Other Place Where The Contractor Provides Services To Veterans Who Have Been Referred By The Va; And Shall Form The Basis For Termination Of This Contract For Breach. this Certification Concerns A Matter Within The Jurisdiction Of An Agency Of The United States And The Making Of A False, Fictitious, Or Fraudulent Certification May Render The Maker Subject To Prosecution Under 18 U.s.c. 1001. the Contractor Agrees To Obtain A Similar Certification From Its Subcontractors. The Certification Shall Be Made As Part Of The Offerors Response To The Rfp Using The Subject Attachment In Section D Of The Solicitation Document. annual Oig Statement: In Accordance With Hipaa And The Balanced Budget Act (bba) Of 1977, The Hhs Oig Has Established A List Of Parties And Entities Excluded From Federal Health Care Programs. Specifically, The Listed Parties And Entities May Not Receive Federal Health Care Program Payments Due To Fraud And/or Abuse Of The Medicare And Medicaid Programs. therefore, Contractor Shall Review The Hhs Oig List Of Excluded Individuals/entities On The Hhs Oig Web Site At Http://oig.hhs.gov/exclusions/index.asp To Ensure That The Proposed Contractor S Physician(s) Are Not Listed. Contractor Should Note That Any Excluded Individual Or Entity That Submits A Claim For Reimbursement To A Federal Health Care Program, Or Causes Such A Claim To Be Submitted, May Be Subject To A Civil Monetary Penalty (cmp) For Each Item Or Service Furnished During A Period That The Person Was Excluded And May Also Be Subject To Treble Damages For The Amount Claimed For Each Item Or Service. Cmp S May Also Be Imposed Against The Contractor That Employ Or Enter Into Contracts With Excluded Individuals To Provide Items Or Services To Federal Program Beneficiaries. by Submitting Their Proposal, The Contractor Certifies That The Hhs Oig List Of Excluded Individuals/entities Has Been Reviewed And That The Contractors Are And/or Firm Is Not Listed As Of The Date The Offer/bid Was Signed. clinical/professional Performance: The Qualifications Of Contractor Personnel Are Subject To Review By Facility Cos Or His/her Clinical Designee And Approval By The Medical Center Director As Provided In Vha Directive 1100.20 And Vha Directive 1100.21. Clinical/professional Performance Monitoring And Review Of All Clinical Personnel Covered By This Contract For Quality Purposes Will Be Provided By The Facility Cos And/or The Chief Of The Service Or His Designee. A Clinical Cor May Be Appointed, However, Only The Co Is Authorized To Consider Any Contract Modification Request And/or Make Changes To The Contract During The Administration Of The Resultant Contract. non Personal Healthcare Services: The Parties Agree That The Contractor And All Contractor S Physician(s) Shall Not Be Considered Va Employees For Any Purpose. indemnification: The Contractor Shall Be Liable For, And Shall Indemnify And Hold Harmless The Government Against, All Actions Or Claims For Loss Of Or Damage To Property Or The Injury Or Death Of Persons, Arising Out Of Or Resulting From The Fault, Negligence, Or Act Or Omission Of The Contractor, Its Agents, Or Employees. prohibition Against Self-referral: Contractor S Physicians Are Prohibited From Referring Va Patients To Contractor S Or Their Own Practice(s). inherent Government Functions: Contractor And Contractor S Physician(s) Shall Not Perform Inherently Governmental Functions. This Includes, But Is Not Limited To, Determination Of Agency Policy, Determination Of Federal Program Priorities For Budget Requests, Direction And Control Of Government Employees (outside A Clinical Context), Selection Or Non-selection Of Individuals For Federal Government Employment Including The Interviewing Of Individuals For Employment, Approval Of Position Descriptions And Performance Standards For Federal Employees, Approving Any Contractual Documents, Approval Of Federal Licensing Actions And Inspections, And/or Determination Of Budget Policy, Guidance, And Strategy. employee Status: The Contractor Shall Be Responsible For Protecting Contractor S Physician(s) Furnishing Services. To Carry Out This Responsibility, The Contractor Shall Provide Or Certify That The Following Is Provided For All Their Staff Providing Services Under The Resultant Contract: workers Compensation professional Liability Insurance health Examinations income Tax Withholding, And social Security Payments. tort Liability: The Federal Tort Claims Act Does Not Cover Contractor Or Contractor S Physician(s). When A Contractor Or Contractor S Physician(s) Has Been Identified As A Provider In A Tort Claim, The Contractor Shall Be Responsible For Notifying Their Legal Counsel And/or Insurance Carrier. Any Settlement Or Judgment Arising From A Contractor S (or Contractor S Physician(s)) Action Or Non-action Shall Be The Responsibility Of The Contractor And/or Insurance Carrier. key Personnel: the Va Full Time Equivalent (fte) For The Services Required Is 416 Hours = .20 Va Fte. the Minimum Number Of Board Certified/board Eligible General Surgery Physicians Required To Be Onsite Daily Is 1 To Be Onsite As Defined In Paragraph Hours Of Operation In This Section. the Contractor Shall Be Responsible For Providing Coverage To The Va During Periods Of Vacancies Of The Contractor S Personnel Due To Sick Leave, Personal Leave, Vacations And Additional Coverage As Required. In The Event A Scheduled Physician Is Unable To Complete An Assigned Shift, The Contractor Shall Provide Replacement Physician Coverage Within 2 Hours And Notify The Cor Immediately Of The Schedule Change. personnel Substitutions: During The First Ninety (90) Calendar Days Of Performance, The Contractor Shall Make No Substitutions Of Key Personnel Unless The Substitution Is Necessitated By Illness, Death Or Termination Of Employment. The Contractor Shall Notify The Co, In Writing, Within 7 Calendar Day(s) After The Occurrence Of Any Of These Events And Provide The Information Required Below. After 90 Days, The Contractor Shall Submit The Information Required Below To The Co At Least 60 Calendar Days Prior To Making Any Permanent Substitutions. the Contractor Shall Provide A Detailed Explanation Of The Circumstances Necessitating The Proposed Substitutions, Complete Resumes For The Proposed Substitutes, And Any Additional Information Requested By The Co. Proposed Substitutes Shall Have Comparable Qualifications To Those Of The Persons Being Replaced. The Co Will Notify The Contractor Within 7 Calendar Days After Receipt Of All Required Information Of The Decision On The Proposed Substitutes. The Contract Will Be Modified To Reflect Any Approved Changes Of Key Personnel. for Temporary Substitutions Where The Key Person Shall Not Be Reporting To Work For 2 Consecutive Workdays Or More, The Contractor Shall Provide A Qualified Replacement For The Key Person. The Substitute Shall Have Comparable Qualifications To The Key Person. Any Period Exceeding Two Weeks Will Require The Procedure As Stated Above. the Government Reserves The Right To Refuse Acceptance Of Any Contractor Personnel At Any Time After Performance Begins, If Personal Or Professional Conduct Jeopardizes Patient Care Or Interferes With The Regular And Ordinary Operation Of The Facility. Breaches Of Conduct Include Intoxication Or Debilitation Resulting From Drug Use, Theft, Patient Abuse, Dereliction Or Negligence In Performing Directed Tasks, Or Other Conduct Resulting In Formal Complaints By Patient Or Other Staff Members To Designated Government Representatives. Standards For Conduct Shall Mirror Those Prescribed By Current Federal Personnel Regulations. Should The Va Cos Or Designee Show Documented Clinical Problems Or Continual Unprofessional Behavior/actions With Any Contractor S Physician(s), S/he May Request, Without Cause, Immediate Replacement Of Said Contractor S Physician(s). The Co And Cor Shall Deal With Issues Raised Concerning Contractor S Physician(s) Conduct. The Final Arbiter On Questions Of Acceptability Is The Co. contingency Plan: Because Continuity Of Care Is An Essential Part Of Facility S Medical Services, The Contractor Shall Have A Contingency Plan In Place To Be Utilized If The Contractor S Physician(s) Leaves Contractor S Employment Or Is Unable To Continue Performance In Accordance With The Terms And Conditions Of The Resulting Contract. va Hours Of Operation/scheduling: va Business Hours: Va Clinc Days And Prouders Are From Monday Through Friday 7am To 3pm. clinic Or Or Schedule: Contract S Physician(s) Will Be Scheduled Tuesday S And Friday S Between The Hours Of 7am To 3pm. patients Must Be Seen By A Contractor S Physician(s) Onsite At The Sfvamc In A Timely Manner In Accordance With Va Rules And Regulations On Clinic Wait Times And Consult Completion. Contractor Shall Notify The Cor At Least Monthly About Any Obstacles To Meeting This Performance Measure. contractor S Physician(s) Shall Be Available And Present In Clinic During Normal Sfvamc Clinic Hours, Which Will Be Established, And May Be Revised, As Deemed Appropriate For Patient Care By The Cos. Currently, Normal Clinic Hours Are 7am To 3pm. federal Holidays: The Following Holidays Are Observed By The Va: new Year S Day president S Day martin Luther King S Birthday memorial Day juneteenth independence Day labor Day columbus Day veterans Day thanksgiving christmas any Day Specifically Declared To Be A National Holiday. cancellations: 45 Days Notice From Contractor, If No Provider S Are Available. contractor Responsibilities: clinical Personnel Required: The Contractor Shall Provide Contractor S Physician(s) Who Are Competent, Qualified Per This Performance Work Statement And Adequately Trained To Perform Assigned Duties. contractor S Physician(s) Shall Be Responsible For Signing In And Out When In Attendance. Time Sheets Will Be Used By The Cor To Confirm Hours/day And Services Provided Against The Contractor S Invoices. standards Of Care: The Contractor S Physician(s) Care Shall Cover The Range Of General Surgery Services As Would Be Provided In A State-of-the-art Civilian Medical Treatment Facility And The Standard Of Care Shall Be Of A Quality, Meeting Or Exceeding Currently Recognized The Joint Commission (tjc), Va And National Standards As Established By: the Abs Http://www.absurgery.org/ the Professional Standards Of Tjc: Http://www.jointcommission.org/standards_information/standards.aspx the Standards Of The American Hospital Association (aha): Http://www.hpoe.org/resources?show=100&type=8 the Requirements Contained In This Pws (not Applicable) medical Records: authorities: Contractor S Physician(s) Providing Healthcare Services To Va Patients Shall Be Considered As Part Of The Department Healthcare Activity And Shall Comply With The 5 U.s.c.552a (privacy Act), 38 U.s.c. 5701 (confidentiality Of Claimants Records), 5 U.s.c. 552 (foia), 38 U.s.c. 5705 (confidentiality Of Medical Quality Assurance Records) 38 U.s.c. 7332 (confidentiality Of Certain Medical Records), Title 5 U.s.c. § 522a (records Maintained On Individuals) As Well As 45 C.f.r. Parts 160, 162, And 164 (hipaa). hipaa: This Contract And Its Requirements Meet Exception In 45 Cfr 164.502(e), And Do Not Require A Baa In Order For Covered Entity To Disclose Protected Health Information To: A Health Care Provider For Treatment Of Va Patients. Based On This Exception, A Baa Is Not Required For This Contract. Health Records Generated By This Contract Or Provided To The Contractors By The Va Are Covered By The Va Privacy Act System Of Records Entitled Patient Medical Records-va (24va10a7). Contractor Generated Va Patient Records Are The Property Of The Va And Shall Not Be Accessed, Released, Transferred, Or Destroyed Except In Accordance With Applicable Laws And Regulations. Contractor Shall Ensure That All Records Pertaining To Medical Care And Services Provided To Va Patients Are Captured In The Va Electronic Health Record System As Required By Va Policy As Discussed In 4.4.4. disclosure: Contractor S Physician(s) May Have Access To Patient Medical Records For The Purpose Of Providing Medical Care And Services To Va Patients And Performing Services Under The Contract; However, Contractor Shall Obtain Permission From The Va Before Disclosing Any Patient Information Outside Va. Va Authorizes The Contractor To Discuss Patient Health Information For Coordination Of Care Within Community Health Care Providers In Compliance With Va Regulations, Hipaa And Vha Directive 1605.1, Privacy And Release Of Information. The Va Will Provide The Contractor With A Copy Of Vha Directive 1907.01, Health Information Management And Health Records And Vha Directive1605.1, Privacy And Release Of Information. The Penalties And Liabilities For The Unauthorized Disclosure Of Va Patient Information Mandated By The Statutes And Regulations Mentioned Above, Apply To The Contractor. professional Standards For Documenting Care: Care Shall Be Appropriately Documented In Medical Records In Accordance With Standard Commercial Practice And Guidelines Established By Vha Directive 1907.01 Health Information Management And Health Records: Https://www.va.gov/vhapublications/viewpublication.asp?pub_id=9235 And All Guidelines Provided By The Facility. release Of Information: The Va Shall Maintain Control Of Releasing Any Copies Of Patient Health Information Or Health Records And Will Follow Policies And Standards As Defined, But Not Limited To Privacy Act Requirements. The Contractor Will Not Release Or Disclose Copies Of Records And Will Refer All Such Requests To The Release Of Information Department At The Va Facility Where Assigned. management For Medical Records: National Archives And Records Administration Record Disposition Requirements Are Found In Rcs 10-1 Chapter 6, 6000 Series. direct Patient Care: 100% Of The Time Involved In Direct Patient Care. Contractor Shall Be Responsible For: scope Of Care: Contractor S Physician(s) Shall Be Responsible For Providing General Surgery Physician Care, Including, But Not Limited To: clinic Responsibilities: Contractor Physician(s) Shall Be Present On Time For Any Scheduled Clinics/surgeries Start Times As Documented By Physical Presence In The Clinic Or Or At The Scheduled Start Time. communication Of Test Results: Mechanisms Must Be In-place To Provide Notification Of Test Results For Patients Receiving Care In Accordance With Vha Directive 1088, Communicating Test Results To Providers And Patients. medications: Contractor S Physician(s) Shall Follow All Established Medication Policies And Procedures. No Sample Medications Shall Be Provided To Patients. discharge Education: Provide Discharge Education And Follow Up Instructions That Are Coordinated With The Next Care Setting For All General Surgery Clinical Or Surgical Patients. (not Applicable) qa/qi Documentation: The Contractor S Physician(s) Shall Complete The Appropriate Qm/pi Documentation Pertaining To All Procedures, Complications And Outcome Of Examinations. patient Safety Compliance And Reporting: Contractor S Physician(s) Shall Follow All Established Patient Safety And Infection Control Standards Of Care. Contractor S Physician(s) Shall Make Every Effort To Prevent Medication Errors, Falls, And Patient Injury Caused By Acts Of Commission Or Omission In The Delivery Of Care. All Events Related To Patient Injury, Medication Errors, And Other Breeches Of Patient Safety Shall Be Documented In The Medical Record Of Those Impacted And Disclosed To The Patient Or Surrogate. As Soon As Practicable (but Within 24 Hours) Contractors Shall Notify Cor Of Incident And Submit An Entry In The Va Patient Safety Reporting System, Following Up With Cor As Required Or Requested. performance Standards, Quality Assurance (qa) And Quality Improvement(qi): quality Management/quality Assurance Surveillance: Contract Personnel Shall Be Subject To Quality Management Measures, Such As Patient Satisfaction Surveys, Timely Completion Of Medical Records, And Peer Reviews. Methods Of Surveillance: Focused Provider Practice Evaluation (fppe) And Ongoing Provider Practice Evaluation (oppe). Contractor Performance Will Be Monitored By The Government Using The Standards As Outlined In This Pws And Methods Of Surveillance Detailed In The Qasp. The Qasp Shall Be Attached To The Resultant Contract And Shall Define The Methods And Frequency Of Surveillance Conducted. patient Complaints: The Co Will Resolve Complaints Concerning Contractor Relations With The Government Employees Or Patients. The Co Is Final Authority On Validating Complaints. If The Contractor Is Involved And Named In A Validated Patient Complaint, The Government Reserves The Right To Refuse Acceptance Of The Services Of Such Personnel. This Does Not Preclude Refusal In The Event Of Incidents Involving Physical Or Verbal Abuse. the Government Reserves The Right To Refuse Acceptance Of Any Contractor Personnel At Any Time After Performance Begins, If Personal Or Professional Conduct Jeopardizes Patient Care Or Interferes With The Regular And Ordinary Operation Of The Facility. Breaches Of Conduct Include Intoxication Or Debilitation Resulting From Drug Use, Theft, Patient Abuse, Dereliction Or Negligence In Performing Directed Tasks, Or Other Conduct Resulting In Formal Complaints By Patient Or Other Staff Members To Designated Government Representatives. Standards For Conduct Shall Mirror Those Prescribed By Current Federal Personnel Regulations. The Co And Cor Shall Deal With Issues Raised Concerning Contractor S Conduct. The Final Arbiter On Questions Of Acceptability Is The Co. performance Standards: measure: Provider Quality Performance performance Requirement: All Contractor S Physician(s) Shall Perform In Accordance With Clinical Standards standard: Oppe Documentation For All (100%) Staff Providing Services Under The Contract. All Staff (100%) Meet Standards aql: 100% Meet Standards surveillance Method: Oppe Data Pertinent To Care Performed For Each Provider Working Under This Contract. Oppe Data Will Review The Following Elements: patient Care Performance medical/clinical Knowledge practiced Based Learning And Improvement interpersonal And Communication Skills professionalism system Based Practice frequency: Annual measure: Qualifications Of Key Personnel performance Requirement: All Contractor S Physician(s) Shall Be Board Certified/board Eligible Accordance With Abs Standards For General Surgery standard: All (100%) Contractor S Physician(s) Are Board Certified/board Eligible aql: 100% surveillance Method: Periodic Inspection Of Qualification Documents frequency: Bi-annually measure: Scope Of Practice/privileging performance Requirement: Contractor S Physician(s) Perform Within Their Individual Scopes Of Practice/privileging standard: All (100%) Contractor S Physician(s) Perform Within Their Scope Of Practice/privileges 100% Of The Time aql: 100% Contractor S Physician(s) Perform Within Their Scope Of Practice/privileges 100% Of The Time surveillance Method: Random Sampling Of Records frequency: Every 6 Months measure: Patient Access performance Requirement: The Contractor Shall Provide Contractor S Physician(s) In Accordance With The Operating Hours And Va Clinical Schedule Outlined In This Pws standard: All (100%) Contractor S Physician(s) Are On Time And Available To Perform Services aql: Contractor S Physician(s) Is On-time And Available To Perform Services 95% Of The Time surveillance Method: Periodic Inspection Of Time And Attendance Sheets frequency: Daily measure: Patient Safety performance Requirement: Patient Safety Incidents Shall Be Reported Using Va Patient Safety Reporting System. All Incidents Reported Immediately (within 24 Hours.) standard: All (100%) Of Patient Safety Incidents Are Reported Using Va Patient Safety Reporting System Within 24 Hours Of Incident aql: 100% Of Patient Safety Incidents Are Reported Using Va Patient Safety Reporting System Within 24 Hours Of Incident surveillance Method: Periodic Inspection frequency: Daily measure: Maintains Licensing, Registration, And Certification performance Requirement: Updated Licensing, Registration And Certification Shall Be Provided As They Are Renewed. Licensing And Registration Information Kept Current standard: All (100%) Licensing, Registration(s) And Certification(s) For Contractor S Physician(s) Shall Be Provided As They Are Renewed. Licensing And Registration Information Kept Current aql: 100% Licensing, Registration(s) And Certification(s) For Contractor S Physician(s) Shall Be Provided As They Are Renewed. Licensing And Registration Information Kept Current. No Acceptable Deviation. surveillance Method: Periodic Inspection frequency: Annually measure: Mandatory Training performance Requirement: Contractor Shall Complete All Required Training On Time Per Facility Policy standard: All (100%) Of Required Training Is Complete On Time By Contractor S Physician(s) aql: 95% Completions surveillance Method: Periodic Inspection Or Random Sampling frequency: Annually measure: Privacy, Confidentiality And Hipaa performance Requirement: Contractor Is Aware Of All Laws, Regulations, Policies And Procedures Relating To Privacy, Confidentiality And Hipaa And Complies With All Standards Zero Breaches Of Privacy Or Confidentiality standard: All (100%) Contractor S Physician(s) Comply With All Laws, Regulations, Policies And Procedures Relating To Privacy, Confidentiality And Hipaa aql: 100% Compliance surveillance Method: Periodic Inspection; Contractor Shall Provide Evidence Of Annual Training Required By The Facility, Reports Violations Per Va Handbook 6500.6 frequency: Annually registration With Contractor Performance Assessment Reporting System as Prescribed In Far Part 42.15, The Va Evaluates Contractor Past Performance On All Contracts That Exceed The Simplified Acquisition Threshold And Shares Those Evaluations With Other Federal Government Contract Specialists And Procurement Officials. The Far Requires That The Contractor Be Provided An Opportunity To Comment On Past Performance Evaluations Prior To Each Report Closing. To Fulfill This Requirement Va Uses An Online Database, Cpars, Which Is Maintained By The Naval Sea Logistics Center In Portsmouth, New Hampshire. Cpars Has Connectivity With The Past Performance Information Retrieval System (ppirs) Database, Which Is Available To All Federal Agencies. Ppirs Is The System Used To Collect And Retrieve Performance Assessment Reports Used In Source Selection Determinations And Completed Cpars Report Cards Transferred To Ppirs. Cpars Also Includes Access To The Federal Awardee Performance And Integrity Information System (fapiis). Fapiis Is A Web-enabled Application Accessed Via Cpars For Contractor Responsibility Determination Information. each Contractor Whose Contract Award Is Estimated To Exceed The Simplified Acquisition Threshold Requires A Cpars Evaluation. A Government Focal Point Will Register Your Contract Within Thirty Days After Contract Award And, At That Time, You Will Receive An Email Message With A User Id (to Be Used When Reviewing Evaluations). Additional Information Regarding The Evaluation Process Can Be Found At Www.cpars.gov Or If You Have Any Questions, You May Contact The Customer Support Desk @ Dsn: 684-1690 Or Comm: 207-438-1690. for Contracts With A Period Of One Year Or Less, The Co Will Perform A Single Evaluation When The Contract Is Complete. For Contracts Exceeding One Year, The Co Will Evaluate The Contractor S Performance Annually. Interim Reports Will Be Filed Each Year Until The Last Year Of The Contract, When The Final Report Will Be Completed. The Report Shall Be Assigned In Cpars To The Contractor S Designated Representative For Comment. The Contractor Representative Will Have Sixty (60) Days To Submit Any Comments And Re-assign The Report To The Co. failure For The Contractor S Representative To Respond To The Evaluation Within Those Sixty (60) Days, Will Result In The Government S Evaluation Being Placed On File In The Database With A Statement That The Contractor Failed To Respond; The Contractor S Representative Will Be Locked Out Of The Evaluation And May No Longer Send Comments. government Responsibilities: va Support Personnel, Services Or Equipment: Not Needed contract Administration/performance Monitoring: After Award Of Contract, All Inquiries And Correspondence Relative To The Administration Of The Contract Shall Be Addressed To: (enter Contract Administration If Not Already Listed In Another Area- List The Title (not Name) And Contact Information For Cor, Clinical Point Of Contact, And Any Other Relevant Personnel Involved). co Responsibilities: the Co Is The Only Person Authorized To Approve Changes Or Modify Any Of The Requirements Of This Contract. The Contractor Shall Communicate With The Co On All Matters Pertaining To Contract Administration. Only The Co Is Authorized To Make Commitments Or Issue Any Modification To Include (but Not Limited To) Terms Affecting Price, Quantity Or Quality Of Performance Of This Contract. the Co Shall Resolve Complaints Concerning Contractor Relations With The Government Employees Or Patients. The Co Is Final Authority On Validating Complaints. In The Event The Contractor Effects Any Such Change At The Direction Of Any Person Other Than The Co Without Authority, No Adjustment Shall Be Made In The Contract Price To Cover An Increase In Costs Incurred As A Result Thereof. in The Event That Contracted Services Do Not Meet Quality And/or Safety Expectations, The Best Remedy Will Be Implemented, To Include But Not Limited To A Targeted And Time Limited Performance Improvement Plan; Increased Monitoring Of The Contracted Services; Consultation Or Training For Contractor Personnel To Be Provided By The Va; Replacement Of The Contract Personnel And/or Renegotiation Of The Contract Terms Or Termination Of The Contract. cor Responsibilities: the Cor Shall Be The Va Official Responsible For Verifying Contract Compliance. After Contract Award, Any Incidents Of Contractor Noncompliance As Evidenced By The Monitoring Procedures Shall Be Forwarded Immediately To The Co. the Cor Will Be Responsible For Monitoring The Contractor S Performance To Ensure All Specifications And Requirements Are Fulfilled. Quality Improvement Data That Will Be Collected For Ongoing Monitoring Includes But Is Not Limited To: Enter Data That May Be Collected. the Cor Will Maintain A Record-keeping System Of Services By Electronical Fileinvoice Payment Process System (ipps). The Cor Will Review This Data Monthly When Invoices Are Received And Certify All Invoices For Payment By Comparing The Hours Documented On The Va Record-keeping System And Those On The Invoices. Any Evidence Of The Contractor's Non-compliance As Evidenced By The Monitoring Procedures Shall Be Forwarded Immediately To The Co. the Cor Will Review And Certify Monthly Invoices For Payment. If In The Event The Contractor Fails To Provide The Services In This Contract, Payments Will Be Adjusted To Compensate The Government For The Difference. all Contract Administration Functions Will Be Retained By The Va. special Contract Requirements: reports/deliverables: The Contractor Shall Be Responsible For Complying With All Reporting Requirements Established By The Contract. Contractor Shall Be Responsible For Assuring The Accuracy And Completeness Of All Reports And Other Documents As Well As The Timely Submission Of Each. Contractor Shall Comply With Contract Requirements Regarding The Appropriate Reporting Formats, Instructions, Submission Timetables, And Technical Assistance As Required. the Following Are Brief Descriptions Of Required Documents That Must Be Submitted By Contractor: Upon Award; Weekly; Monthly; Quarterly ; Annually, Etc. Identified Throughout The Pws And Is Provided Here As A Guide For Contractor Convenience. If An Item Is Within The Pws And Not Listed Here, The Contractor Remains Responsible For The Delivery Of The Item. note To Contracting: These Items Must Be Described In 52.212-1 Addendum To Instructions To Offerors what submit As Noted submit To quality Control Plan: Description And Reporting Reflecting The Contractor S Plan For Meeting Of Contract Requirements And Performance Standards upon Proposal And As Frequently As Indicated In The Performance Standards co other Than Cost And Price Information Supporting Proposed Physician Rate (required For Affiliate Onsite Hourly- Remove If It Does Not Apply) upon Proposal, To Submit Epa Request, Upon Change In Key Personnel co copy Of Subcontracting Plan Is Required For All Large Businesses. Copy Of Contractor Certification Statement If No Subcontracting Possibilities Exist upon Proposal And As Updated co copies Of Any And All Licenses, Board Certifications, Npi, To Include Primary Source Verification Of All Licensed And Certified Staff upon Proposal And Upon Renewal Of Licenses And Upon Renewal Of Option Periods Or Change Of Key Personnel co With Proposal; Renewal Submitted To Vetpro System certification That Staff List Has Been Compared To Oig List upon Proposal And Upon New Hires co proof Of Indemnification And Medical Liability Insurance upon Proposal And Upon Renewals co certificates Of Completion For Cyber Security And Patient Privacy Training Courses before Receiving An Account On Va Network And Annual Training And New Hires. co acls/bls Certification upon Award And Every Two Years After Award cor contingency Plan For Replacing Key Personnel To Maintain Services As Required Under The Terms Of The Contract upon Proposal And As Updated cor billing: invoice Requirements And Supporting Documentation: Supporting Documentation And Invoice Must Be Submitted No Later Than The Last Workday Of The Month. Subsequent Changes Or Corrections Shall Be Submitted By Separate Invoice. In Addition To Information Required For Submission Of A Proper Invoice In Accordance With Far 52.212-4 (g), All Invoices Must Include: name And Address Of Contractor invoice Date And Invoice Number contract Number And Purchase/task Order Number date Of Service contractor S Physician(s) (name Of Contractor S Employee) hourly Rate quantity Of Hours Worked total Price vendor Electronic Invoice Submission Methods: invoices Will Be Electronically Submitted To The Tungsten Website At Https://www.tungstenautomation.com/. Tungsten Automation Direct Vendor Support Number Is 877-489-6135 For Va Contracts. The Va-fsc Pays All Associated Transaction Fees For Va Orders. During Implementation (technical Set-up) Tungsten Automation Will Confirm Your Taxpayer Id Number With The Va-fsc. This Process Can Take Up To 5 Business Days To Complete To Ensure Your Invoice Is Automatically Routed To Your Certifying Official For Approval And Payment. To Successfully Submit An Invoice To Va-fsc Please Review How To Create An Invoice Within The How To Guides. All Invoices Submitted Through Tungsten Automation To The Va-fsc Should Mirror The Current Submission Of Invoice. Clarification Of Additional Requirements Should Be Confirmed With Your Certifying Official (your Co Or Buyer). Payment Will Only Be Made For Actual Services Rendered. Payments Shall Be Made Monthly In Arrears. The Va-fsc Requires Specific Information In Compliance With The Prompt Pay Act And Business Requirements. The Contractor Shall Be Reimbursed Upon Receipt Of A Proper Invoice. For Additional Information, Please Contact: tungsten Support phone: 1-877-489-6135 website: Https://www.tungstenautomation.com/ department Of Veterans Affairs Financial Service Center https://www.fsc.va.gov/einvoice.asp â  reduction In Services: This Is A Fixed Quantity Contract For A Specified Number Of Hours. If, At The End Of The Pop, The Government Has Not Utilized The Total Number Of Hours Required Under This Contract Because Of A Change In Its Requirements, The Parties Agree That They Will Attempt To Negotiate In Good Faith A Contract Modification Reducing The Scope Of The Contract With A Corresponding Adjustment In The Total Contract Price. In No Event Will The Va Pay For Hours That Exceed The Total Number Of Hours Specified In The Contract For The Pop. payments In Full/no Billing Va Beneficiaries: The Contractor Shall Accept Payment For Services Rendered Under This Contract As Payment In Full. Va Beneficiaries Shall Not Under Any Circumstances Be Charged Nor Their Insurance Companies Charged For Services Rendered By The Contractor, Even If Va Does Not Pay For Those Services. This Provision Shall Survive The Termination Or Ending Of The Contract. to The Extent That The Veteran Desires Services Which Are Not A Va Benefit Or Covered Under The Terms Of This Contract, The Contractor Must Notify The Veteran That There Will Be A Charge For Such Service And That The Va Will Not Be Responsible For Payment. the Contractor Shall Not Bill, Charge, Collect A Deposit From, Seek Compensation, Remuneration, Or Reimbursement From, Or Have Any Recourse Against, Any Person Or Entity Other Than Va For Services Provided Pursuant To This Contract. It Shall Be Considered Fraudulent For The Contractor To Bill Other Third-party Insurance Sources (including Medicare) For Services Rendered To Veteran Enrollees Under This Contract. contractor Security Requirements (va Handbook 6500.6): Pulled From Ecms, Team Should Select Language From Each Section As Applicable.

Details: Introduction the Army Contracting Command (acc) Orlando Is Issuing This Sources Sought Notice And Holding An Industry Day As A Means Of Conducting Market Research To Identify Parties Having In The Capability And The Resources To Support The Requirement To Provide Agile, Specialized And Cost Effective Security Assistance Teams (sats) In Order To Facilitate Security Assistance Programs That Build Partnership Capacity As Well As Defense And Security Relationships; That Promote Specific U.s. Security Interests, Including All Security Assistance Activities; Develop Allied And Friendly Military Capabilities For Self-defense And Multinational Operations; And Provide U.s. Forces With Peacetime And Contingency Access To Host Nations In Support Of United States Army Campaign Plan And U.s. National Security Objectives. the Intention Is To Award A New Multiple Award Task Order Contract (matoc) Indefinite Delivery Indefinite Quantity (idiq) Contract. place Of Performance minimal Continental United States (conus) Performance (program Management) And Phase-in Period Will Occur. Predominantly Performance Will Be Outside The Continental United States (oconus). *note 01: The Oconus Portion Required Will Have Contractor Performance Under Potentially Austere, Physically Demanding, And Stressful Working Conditions. program Background u.s. Army Security Assistance Training Management (satmo) Is A Subordinate Command Under The U. S. Army Security Assistance Command (usasac), A Major Subordinate Command (msc) Of Army Material Command (amc). Satmo Executes The Overseas Portion Of The U.s. Army’s Security Assistance Enterprise Outside Continental United States (oconus) Training And Technical Assistance Mission. Satmo Plans, Forms, Prepares, Deploys, Sustains And Re-deploys Continental United States (conus)-based (from The Continental U.s.) Sats To Execute Oconus Security Cooperation Missions In Support Of Geographic Combatant Command Theater Security Cooperation Programs And U.s. Foreign Policy (for The Purposes Herein, The Terms “security Assistance” And “security Cooperation” Mean “foreign Military Aid.”). satmo Staff Teams With Active Component Army, Active Component Members Of Other Services, Reserve Component Army, Reserve Component Members Of Other Services And Dod Civilians. Satmo May Use Contractor Services If None Of These Are Available For A Given Aviation Sat Mission To Support Rotary Wing Aircraft. Because Of Long Lead-times For Non-contract Personnel, And Current Operations Tempo, Satmo Anticipates An Increasing Requirement For Contractor Support, Especially For Aviation Skills Including Flying, Maintenance And Operational Planning. Additional Requirements Will Include The Same Aviation Skills As Previously Listed But For Non-standard Aircraft. In This Case Non-standard Aircraft Are All Types Not Currently Employed By The Active Component, This Includes Legacy Air Frames. In Accordance With The Assistant Secretary Of The Army For (acquisition, Logistics, And Technology) (asa (alt)) Memorandum Dated 6 January 2010, All Non-standard Aircraft Training Not Procured Through The United States Army Aviation And Missile Command (amcom) Acquisition Center Shall Be Referred To The Deputy Assistant Secretary Of The Army (procurement) (dasa (p)), The Deputy Assistant Secretary Of The Army (acquisition Policy And Logistics) (dasa (apl)), And The Deputy Assistant Secretary Of The Army (defense Exports And Cooperation) (dasa (dec)) For Review And Evaluation And Asa (alt) For Approval Prior To Any Commitment And Execution By Any Other Acquisition Office. Specific Skill Requirements Will Be Identified At The Task Order (to) Level. When It Is Known That Uniformed Personnel Will Not Be Available, Contractor Support Will Become The First Option Considered. In Other Cases, The More Rapid Reaction Time Of Contractors May Be A Governing Factor In Using Contractor Teams. Aviation Sats Deployed Because Of This Contract May Be A Single Contractor Employee, A Combination Of Department Of Defense Personnel And Contractor Employee(s), Or Entirely Contractor Employees. aviation Services Will Be Provided During The Aviation Sat Execution Phase And During The Post Deployment Stage Of An Aviation Sat Mission Cycle. The Aviation Services Required Are Divided Into Two (2) Categories: Rotary Wing Training Related Services And Rotary Wing Technical Assistance Related Services. The Example Subtasks And Explanations Listed Below Are Representative Of Aviation Sat Rotary Wing Missions That Satmo May Accomplish During A To. potential Technical Assistance Related Mission Sets Are Fast Rope Insertion And Extraction System (fries), Special Patrol Insertion And Extraction System (spies), Hoist, External Loads, Over Water, Helicopter Arial Refuel (har), High Altitude Aviation Training Site (haats), Aerial Gunnery, Aviation Special Operations, And Air Assault/air Movement. Provide Any Supporting Documentation Reflecting The Experience. Potential Qualified Trainers And Advisors Of Usaace Rotary Wing Pilots (sp/ip, Me/mtp, Amso, Aso), 15 Series Military Occupational Specialty Codes (mos), Mos Maintainers (15b,15d,15f,15g, 15h, 15n,15r, 15y), And 15 Mos Crew Members (15t, 15u) With Additional Qualifications Of Standardization Instructor (si)/ Flight Instructor (fi), And Flight Engineer (fe) And Personnel Capable Of Establishing Base Operations Training Capabilities. specific Tasks tasks Listed Herein Are Only Examples And Are Not To Be Performed Unless Issued On A Task Order. These Are Intended To Provide A Sampling Of The Types Of Missions (and Inherent Requirements) Which Could Reasonably Be Expected To Be Resourced And Executed By The Contractor. The List Is By No Means Exhaustive, Either In The Nature Or The Scope Of Possible Missions. training Related Services. Satmo Provides Aviation Training, Maintenance Training, And Advisory Services To Customer-host Nations In Several Different Major Areas. conduct Aviation Assessments To: determine Aviation Training Requirements. identify Aviation Areas Requiring Technical Assistance (maintenance, Logistics, Standardization, Etc.). host Aviation Engineering Directorate (aed) Sourced Airworthiness Assessment Teams. evaluate Aviation Safety Processes And Programs. conduct Formal Academic And Flight Training: initial Rotary Wing Qualification Courses To Train Crewmembers In The Basic Skills Required To Operate An Aircraft Under Day, Night, And Instrument Condition. aircraft Qualification Courses To Train Crewmembers To Operate A Specific Aircraft. aircraft Series Transition Courses To Train Crewmembers That Are Already Qualified On A Specific Aircraft To Operate A New Or Different Version. training On Advanced Aviation Skills Such As Night Vision Systems, Aerial Gunnery, Formation Flight, Etc. crew Chief, Flight Engineer, And Crew Communications Courses. graduate-level Aviator Instructor Pilot And Maintenance Test Pilot Qualification Courses. non-aircraft Specific Pilot Courses On Aviation Mission Planning, Aerodynamics, Aviation Medical Issues, Etc. The Contractor Will Have Access To The Host Nation Aviation Mission Planning System/device On Any To That Requires Amps Duties. conduct Formal Academic And Hands-on Demonstration Training: individual Aircraft Repairer General And Aircraft Specific Maintenance Courses. aviation Organizational/line Unit Maintenance Courses. aviation Intermediate/allied Shops Maintenance Courses. training On Advanced Maintenance Skills Such As Technical Inspection, Quality Control, Production Control, Maintenance Management, Etc. training On Supporting Aviation Systems Including Ground Support Equipment, Special Tools, Aviation Sets/kits/equipment, And Air Traffic Control Communication Systems. provide Advice, Informal Training, Mentorship, And Assistance To: enhance Unit Flight And Tactical Operations. conduct Individual And Collective Sustainment Training. promote Host Nation Aviation Safety. assist To Establish Host Nation Aviation Systems, Programs, Processes, And Sops; Especially In The Areas Of Safety, Operations, Training, Standardization, Maintenance, Logistics, And Sustainment. inform Host Nation Personnel Of Us Army Aviation Best Practices And Lessons Learned. technical Assistance Related Services. Provide Technical Assistance And Expertise Required To Operate, Maintain, Sustain Or Return Complex Customer-nation Aviation Systems To Operational Readiness. Examples Include: Conducting Specific Aircraft Systems-related Training Courses, Assisting The Customer To Implement An Automated Aviation Technical Supply System, Or Advising Them On How To Establish Aircrew Life Support Equipment (alse) Training Program. Each To Will Address Specifics On The Required Technical Assistance Tasks To Be Performed. generic Aviation Maintenance Related Technical Assistance Task Statement. Provide Technical Assistance And Expertise To Repair, Modernize, Inspect Or Validate The Mission Readiness Of Host Nation Aviation Equipment Or Weapon Systems And Its Components. All Final Inspections Will Be Accomplished By The Government Or Customer-nation. Training Of Customer-nation Personnel Is Not The Primary Focus During These Missions. Any Training Benefit Derived Is Collateral To The Primary Mission. Essential Maintenance Related Subtasks May Include: inspect, Troubleshoot And Repair Equipment (type Of Equipment Tbd At To Level) Iaw An Army Aviation And Missile Command Aviation Safety Action Memo (asam) Or Safety Of Flight Message (sofm) To Restore The Equipment (type Of Equipment Tbd At To Level) Model Helicopter To Mission Readiness Status. operational Planning. Analyzing Emergent Requirements And Assisting In Plan Development To Meet Those Requirements. required Qualifications all Flying Contractor Members Shall Meet The Qualification Requirements Of Dcma Inst 8210.1d (ar 95-20). eligibility the Applicable Naics Code For This Requirement Is 611512 (flight Training), With A Small Business Size Standard Of $34.0m. The Product Service Code Is U099 (education/training - Other). Businesses Of All Sizes Are Encouraged To Respond; However, Each Respondent Must Clearly Identify Their Business Size In Their Capabilities Statement. *note 01: The Current Sba Table Of Small Business Size Standards Was Updated 17 March 2023; Since The Beginning Of 2022, The Sba Has Regularly Updated The Table To Account For Inflation. Businesses Must Update Their Sam.gov Profiles To Have Their Small Business Status Reflect The Most Current Small Business Size Standards. Until Updated, The Sam Profiles Will Continue To Display The Small Business Status Under Outdated Size Standards. *note 02: In Accordance With 13 C.f.r. 121.104, The Current Calculation For Dollar (monetary) Value Based Naics Codes Is Average Total Receipts Over The Last Five (5) Completed Fiscal Years *note 03: In Accordance With 13 C.f.r. 121.106, The Current Calculation For Employee Based Naics Codes Is Average Number Of Employees Used For Each Pay Period For The Preceding Completed 24 Calendar Months. additional Information the Estimated Period Of Performance Consists Of Five-year Base With Performance Commencing In Late May 2027. The Government May Issue By Bi-lateral Extension Extend The Ordering Period Of This Contract For Up To An Additional Five (5) Years Provided The Maximum (total Contract Minimum) Designated In The Schedule Has Not Been Exceeded. Therefore The Total Duration Of The Ordering Period Of Performance, Including The Extension, Shall Not Exceed 10 Years. the Contract Type For Task Orders Is Anticipated To Be A Firm Fixed Price. The Base Indefinite Delivery Indefinite Quantity (idiq) Contracts Estimated Ceiling Is $249m. the Government Is Currently Refining The Acquisition Strategy, And The Planned Approach Has Not Yet Been Finalized. Your Firm’s Responses To This Posting Will Assist The Government With Its Development. industry Day Is Being Held On 3 February 2025. Individual Breakout Sessions Are Being Held 4 February 2025. Instructions On How To Register For Industry Day And Individual Breakout Sessions Are Contained In The Attachments. questions And Answers Session: Individuals Are Encouraged To Submit Their Technical Questions Via Email To Ms.caryn H. Mcgraw, Email Caryn.h.mcgraw.civ@army.mil. And Ms. Glenda Torres, Email Glenda.m.torres.civ@army.mil. No Later Than 3 Pm, 9 January 2025. Technical Questions Submitted In Advance Will Be Addressed During The Questions And Answers Session At Industry Day, Followed By An Open Discussion Where The Panel May Address Technical Questions From The Audience. submission Details (capabilities Statement) contractors Are Requested To Submit A Capabilities Statement Including A Cover Sheet Of No More Than 15 Pages. Font Shall Be No Smaller Than Arial 10. The Cover Page Should Include Company Name, Address, And Points Of Contact Including Phone Numbers And E-mail Addresses. The Cover Sheet Shall Not Count Towards The Page Count. the Deadline For Response To The Capability Statement, Industry Day Registration, And Individual Breakout Session Registration Is No Later Than 3 Pm, Est, 9 January 2025. All Responses Under This Sources Sought Notice, Industry Day Notification, And Individual Breakout Registration Must Be E-mailed To Caryn H. Mcgraw, Email Caryn.h.mcgraw.civ@army.mil. And Glenda Torres, Email Glenda.m.torres.civ@army.mil. this Documentation Must Address At A Minimum The Following Items: list The Types Of Rotary Wing Pilot, Maintainer, Or Base Operations Training Capabilities Your Company Had Provided Before Or Is Currently Providing. Provide Contract Numbers For Reference, If These Contracts Are With The Army Or Other Department Of Defense Contracts. describe Your Company’s Capability And Capacity To Provide Qualified Trainers And Advisors Of U.s. Army Aviation Center Of Excellence (usaace) Rotary Wing Pilots (standard Pilot, Instructor Pilot, Maintenance Test Flight Evaluator, Maintenance Test Pilot, Aviation Mission Survivability Officer, And Aviation Safety Officer), And 15 Series Military Occupational Specialty (mos) Jobs Related To Maintaining, Repairing, And Operating Military Aircraft Such As Maintainers (15b,15d,15f,15g, 15h, 15n,15r, 15y) And Crew Members (15t, 15u) With Additional Qualifications Of Standardization Instructor/ Flight Instructor, And Flight Engineer, And Personnel Capable Of Establishing Base Operations Training Capabilities. describe Your Company’s Experience (with Examples) Training And Assisting In The Following Mission Sets: Fries, Spies, Hoist, External Loads, Over Water, Har, Haats, Aerial Gunnery, Aviation Special Operations, And Air Assault/air Movement. Provide Any Supporting Documentation Reflecting The Experience. This List Of Mission Sets Is Not All Inclusive And Experience On Any Other Type Of Mission Sets Can Also Be Provided. describe The Company’s Experience Preparing Employees For Oconus Deployment And Meet All Dod Foreign Clearance Guide Requirements For Passports, Visas, Training And Pre-deployment Preparations. does Your Company Have Experience With Training, Advising, And Assistance With Foreign Customers With Differing Cultures To Include Language Barriers In An Austere Environment? Please Include Oconus Locations, Types Of Performance/services Provided, And Contract Numbers. can Or Has Your Company Managed A Task Of This Nature? If So, Please Provide Details. can Or Has Your Company Managed A Team Of Subcontractors Before? If So, Provide Details. what Specific Technical Skills Does Your Company Possess Which Ensure Capability To Perform The Requirements Detailed Above? provide A Statement Including Current Small/large Business Status And Company Profile To Include Number Of Employees, Annual Revenue History, Office Locations, Duns Number, Etc. a Statement Indicating If Your Firm Is A Large Or Small Business Under Naics Code 611512; If Small Business, Please Indicate Any Applicable Socio-economic Status [i.e., 8a, Small Disadvantaged Business (sdb), Hubzone, Veteran-owned Small Business (vosb), Service-disabled Veteran-owned Small Business (sdvosb), Or Women-owned Small Business (wosb). your Firm’s Response To This Sources Sought, Including Any Capabilities Statement, Shall Be Electronically Submitted In Either Microsoft Word Or Portable Document Format (pdf). the Information Provided To This Sources Sought Shall Not Be Proprietary And May Be Utilized To Assist The Determination Of The Acquisition Strategy To Follow For This Future Effort. The Information Will Be Retained To Document The Market Research Report And Will Be Classified As Controlled Unclassified Information Under Acquisition/procurement Disposition. all Questions Must Be Submitted To The Contract Specialist Identified Above. The Government Is Not Committed Nor Obligated To Pay For The Information Provided, And No Basis For Claims Against The Government Shall Arise As A Result Of A Response To This Sources Sought. note (limitations On Subcontracting): If You Are A Small Business Interested In Being The Prime Contractor For This Effort, Please Be Advised That Far Clause 52.219-14 (limitations On Subcontracting) (deviation 2021-o0008) Was Updated In September 2021. The Current Clause Adds The Definition Of “similarly Situated Entity” And The 50% Calculation For Compliance With The Clause. Small Business Prime Contractors May Now Count “first Tier Subcontractor” Work Performed By A “similarly Situated Entity” As If It Were Performed By The Prime Contractor Itself. to Assist In Our Market Research And Set-aside Determination For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize A “similarly Situated Entity” To Meet The Limitations On Subcontracting Requirements, Please Identify The Name & Unique Entity Id/cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics That You As The Prime Would Assign For Their Workshare. Information Regarding Any Planned “similarly Situated Entity” Should Be Included In Answering Any Questions Outlined In The Ssn In Order To Assist The Government's Capability Determination. disclaimer this Sources Sought Is For Informational Purposes Only. This Is Not A “request For Proposal (rfp)” To Be Submitted. It Does Not Constitute A Solicitation And Shall Not Be Construed As A Commitment By The Government. Responses In Any Form Are Not Offers And The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. No Funds Are Available To Pay For Preparation Of Responses To This Announcement. Any Information Submitted By Respondents To This Technical Description Is Strictly Voluntary. Responses Will Not Be Returned To The Responder. Not Responding To This Notice Does Not Preclude Participation In Any Future Request For Quote (rfq) Or Invitation For Bid (ifb) Or Rfp, If Any Issued. If A Solicitation Is Released, It Will Be Synopsized On The Government-wide Point Of Entry (gpe). It Is The Responsibility Of Potential Offerors To Monitor The Gpe For Additional Information Pertaining To This Requirement.

Details: This Is A Combined Synopsis/solicitation For Commercial Products And Commercial Services Prepared In Accordance With The Format In Federal Acquisition Regulation Part 12, Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation. Quotations Are Being Requested And A Written Solicitation Will Not Be Issued. The Contracting Officer Is Utilizing Policies And Procedures Prescribed In Part 12, Acquisition Of Commercial Products And Commercial Services. Solicitation Number Rfq 45310025q0008 Is Issued As A Request For Quotation (rfq). The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2025-01 Effective On November 12, 2024. Convention Centers, Hotels, And Other Full Service Facilities That Can Satisfy The Requirements Listed Below Are Encouraged To Submit A Quotation. Quotations From Third-party Entities Will Not Be Considered. This Solicitation Is Considered An Unrestricted Procurement. the U.s. Equal Employment Opportunity Commission Office Of Field Programs, State, Local And Tribal Programs Has A Requirement For A Contractor To Provide Meeting Facilities, Rental Of Audio Visual Equipment/support Services, Food And Beverages, Business Services And Lodging To Conduct A Four-day Joint Fepa-tero Conference. The United States Equal Employment Opportunity Commission (eeoc) Is Conducting A Joint Training Conference For Fair Employment Practices Agencies (fepas) And Tribal Employment Rights Offices (teros). the Government Anticipates With A Minimum Of 225 Attendees And An Anticipated Maximum Of 250 Attendees. To Be Eligible For Consideration, The Contractor’s Proposed Facility For The Seminar Must Be Located In Downtown Phoenix, Arizona. the Government Contemplates The Award Of A Firm-fixed Price (ffp) Contract. the Quotation Package Shall Include The Following Line Items In A Written Quotation: (fy 2025): Contract Line Item Number: Clin 0001, Rental Of Conference Space – Quantity 4 Days Each (see Below List Of Conference Space Requirements), Unit Price $ , Total Clin 0001 $ ; clin 0002, Food And Beverage Services (see Below List Of Food And Beverage Requirements, Unit Price $ Per Person Rate Per Day, Unit Price $ , Total For Clin 0002, $ . clin 0003, Rental Of Audio Visual Equipment And Technical Support – Quantity 4 Days Each (see Below List Of Audio Visual Requirements), Unit Price $ , Total For Clin 0003 $ ; clin 0004, Business Services Expenses – 4 Days (see Below List Of Business Services Requirements), Unit Price $ ____, total For Base Period Clin 0004 $ . Total Price For Clins 0001 Through 0004: $ the Preferred Dates For Consideration In Order Of Preference June 1-june 5, 2025 (1st Choice), June 8-june 12, 2025, (2nd Choice), And July 13-july 17, 2025 (3rd Choice). please Indicate Availability For Each Date In The Technical Portion Of The Quotation. No Other Dates Or Combination Of Dates Will Be Considered By The Government. the Conference Provides For Meeting Space For Training Sessions, Along With Food And Beverage Service For Buffet Breakfast, Buffet Lunch, And Morning And Afternoon Breaks. Registration Starts Monday From 8:30am To 4:30pm Et. The Conference Starts Tuesday And Wednesday 7:30 Am To 6:00 Pm Et, Thursday, 7:30am To 1:30pm Et. a Contract Will Be Awarded To The Responsible Quoter Whose Quotation Represents The Best Value To The Government. The Prospective Contractor Must Be Registered In The System For Award Management (sam) Database At The Time The Quotation Is Submitted. Registration Is Free And Can Be Completed On-line At Http://www.sam.gov. Each Quotation Must Clearly Indicate The Capability Of The Quoter To Meet The Requirements Specified In This Combined Synopsis/solicitation. general Requirements: The Following Requirements For The Training Facility Are Specified In Terms Of Minimum Requirements. Accessibility: Americans With Disabilities Act (ada) Requirements: All Facilities, Including Training Rooms And Rest Rooms And Audio-visual Equipment, Must Be Fully Accessible To Individuals With Disabilities In Compliance With The Americans With Disabilities Act Amendments Act. Accommodations For Disabled Individuals May Include, But Are Not Limited To, Accessible Parking Spaces, Elevators, Adequate Sound Systems, Wide Aisles And Wheelchair Ramps. A Site Visit May Be Conducted By The Disability Business And Technical Assistance Centers (dbtac) Prior To The Award Of The Contract. Parking: There Must Be Adequate Free Or Low Cost On-site Parking For All Participants. Confirmation Policy: The Eeoc Anticipates The Need For Sleeping Rooms On Sunday Through Thursday. Eeoc Will Require The Hotel Contact Person To Provide A Listing Of Registered Participants With Reserved Sleeping Rooms Prior To The Lodging Date To Verify The Rooming List As It Develops. Amendments And/or Substitutions May Be Necessary. description Of Facility And Minimum Requirements the Following Requirements For Lodging And Conference Space Are Minimum Requirements: Lodging: Guest Rooms Shall Be Located Onsite. The Facility Shall Be Centrally Located Within No More Than Three Blocks Walking Distance Of Area Retail, Restaurants, And Attractions. The Contractor Shall Provide A List Of All Local Restaurants Within A Ten-minute Walk From The Contractor’s Facility. lodging Payment Arrangements: Participants Will Contact The Hotel Individually To Obtain Room Scheduling And Shall Be Responsible For Payment Of Individual Guest Rooms And All Incidental Charges Upon Checkout. Payment Amount For Lodging Cannot Exceed, On A Daily Basis, The Maximum Per Diem Rate In Effect In Accordance With The Federal Travel Regulations Including Taxes, Gratuities, And Other Costs. Charges For Incidental Expenses Such As Telephone Charges And Room Service Will Be The Responsibility Of Individual Guests. local Transportation: The Contractor Shall Also Provide A List Of Options For commuting From And To All Airports And Railroad Stations (if Applicable) Within The area. If The Contract Facility Provides Shuttle Service, Contractor Shall Indicate If the Service Is Free Or What The Fee Is For The Service. Also, Indicate If The Shuttle service Is Wheelchair Accessible. room Rate: The Contractor Shall Provide The Sleeping Rooms For Eeoc Staff And Presenters At Or Below The Federal Government’s Domestic Per Diem Rate Which Is Available On-line At Http:/www.gsa.gov. The Facility Will Not Require Advance Payment From Conference Participants Covering The First Night Of Lodging. Guest Rooms Shall Be Located Within The Same Building As The Meeting Rooms. guest Rooms: Individual Travelers Will Schedule And Pay For Their Guest Room Nights. The Schedule And Range Of Guest Rooms Anticipated For This Conference Are As Follows: sunday, 35 Sleeping Rooms monday, 250 Sleeping Rooms tuesday, 250 Sleeping Rooms wednesday, 250 Sleeping Rooms thursday, 65 Sleeping Rooms friday, 0 Sleeping Rooms clin 0001 – Conference Space – Meeting Facilities: All Meeting Rooms Shall Be Wheelchair Accessible. The Meeting Facility Shall Be Available For Consecutive Nights And Consecutive Days As Specified Below: conference Will Be Held Monday Through Thursday On The Dates Provided Previously. the Following Meeting Spaces/rooms Shall Be Available Throughout The Conference: registration Area: Registration Area Shall Be Near The Main Plenary Room(s) And Will Include Two Skirted Eight-foot Tables, Configured As Follows: Two Tables Next To Each Other To Accommodate Training Materials. The Facility Shall Provide Signage Identifying The Conference Location Within The Hotel. Set Up Shall Be Completed By 12:00 P.m. Et On Monday. The Registration Area Must Remain Set Up And Available Throughout The Duration Of The Conference. secured Office/working Room: A Secure Office Or Working Room Is Needed Where Conference Materials Can Be Assembled, Sorted, And Stored. This Will Also Be Used As A Work Area For Staff. The Room Must Include At Least Two Six-foot Tables And Trash Receptacles. Telecommunication Requirements Include Electrical Outlets And Internet Access. two Plenary Meeting Rooms: Large Plenary Meeting Room Shall Accommodate Up To 250 People Set In Classroom Style With No More Than Two People Per Six-foot Tables Or 3 People Per Eight-foot Tables Which Are Covered And Skirted. Spacing Between Rows Of Seating Shall Be sufficient For Easy Wheelchair Access. Two Six-foot, Covered And Skirted Head Tables On A Stage With Four Moveable Chairs And Podium With Microphone. The Stage Shall Have Steps With A Handrail On One Side And Shall Be Wheelchair Accessible With A Low To Moderate Incline. The Tables Shall Include Writing Paper, Pens, And Water With Glasses For The Participants At The Start Of The Morning And Refreshed For The Afternoon Sessions. There Shall Be Sufficient Space At The Back Of The Room To Place Additional Chairs, If Needed. Room Will Be Available Between 7:30 Am – 6:00 Pm Et On Tuesday And Wednesday, And 7:30 Am – 1:30 Pm Et On Thursday. medium Plenary Meeting Room Shall Accommodate Up To 100 People Set In Classroom Style With No More Than Two People Per Six-foot Tables Or 3 People Per Eight-foot Tables Which Are Covered And Skirted. Spacing Between Rows Of Seating Shall Be Sufficient For Easy Wheelchair Access. two Six-foot, Covered And Skirted Head Tables On A Stage With Four Moveable Chairs And Podium With Microphone. The Stage Shall Have Steps With A Handrail On One Side And Shall Be Wheelchair Accessible With A Low To Moderate Incline. The Tables Shall Include Writing Paper, Pens, And Water With Glasses For The Participants At The Start Of The Morning And Refreshed For The Afternoon Sessions. There Shall Be Sufficient Space At The Back Of The Room To Place Additional Chairs, If Needed. Room Will Be Available Between 7:30 Am – 6:00 Pm Et On Tuesday And Wednesday, And 7:30 Am – 1:30 Pm Et On Thursday. breakout Rooms: Four Breakout Rooms To Accommodate At Least 65 People Each, Set In Classroom Style With No More Than Two People Per Six-foot Table Or 3 People Per Eight-foot Table Which Are Covered And Skirted Or Round Tables Of 6-8 People Per Table. Each Table Shall Contain Writing Paper, Pens, Ice Water With Glasses, Candy Or Mints For Participants. Tables Shall Be Refreshed For Afternoon Sessions. All Chairs Shall Be In Working Order, Free From Soil And Able To Move Easily. There Shall Be Enough Space Between Tables To Maneuver A Wheelchair. The Hotel May Provide The Large Plenary Meeting Room And Medium Plenary Meeting Room As Two Of The Four Breakout Rooms. All Breakout Rooms Will Be Available 7:30 Am – 6:00 Pm Et On Tuesday And Wednesday, And 7:30 Am – 1:30 Pm Et On Thursday. small Group Meeting Room: This Meeting Room Shall Accommodate Up To 30 People Set In A U-shape Style With Tables That Are Covered And Skirted. The Tables Shall Include Writing Paper, Pens, And Water With Glasses For The Participants At The Start Of The Morning And Refreshed For The Afternoon Sessions. There Shall Be Sufficient Space At The Back Of The Room To Place Additional Chairs, If Needed. Room Will Be Available 8:00 Am – 7:00 Pm Et On Monday; 7:30 Am – 6:00 Pm Et On Tuesday And Wednesday; And 7:30 Am – 6:30 Pm Et On Thursday. all Meeting Rooms Must Have A Suitable Sound System So All Participants May Hear And Ask Questions Of The Speakers. Both Meeting Rooms Should Be Arranged Classroom Style With Chairs And Tables For Writing And Handouts. All Chairs And Tables Shall Be In Acceptable Condition (the Furniture Is Not Broken, Soiled, Rusted Or Damaged In Any Way That Would Injure The Individual Or Damage Clothing). Aisle Space, Including The Space Between Tables And Desk, Need To Be Accessible For Persons In A Wheelchair. Walls Should Be Constructed In Such A Manner That They Confine Inside Sound And Reduce Or Prevent The Transmission Of Extraneous Sound. Both Rooms (including Luncheon Area) Should Be Equipped With A Working Sound System Which May Be Controlled By The Speaker And Which Projects Equally To All Areas Of The Room. Rooms Should Be Configured To Allow Every Participant A Clear View Of The Speaker And All Visual Aids. Each participant Should Have A Clear View Of At Least One Of The Projection Screens In Use. Rooms Should Be Well Lit To Accommodate Extensive Reading And Writing And All Lighting Should Be Uniform And Should Not Produce A Glare. Heating And Air Conditioning Should Provide A Comfortable Level Of Air Quality And Room Temperature When Rooms Are At The Maximum Capacity. Rooms Should Be Refreshed After Each Session And Debris Removed. clin 0002 – Food And Beverage Service: Buffet Breakfast To Be Served On Tuesday, Wednesday, And Thursday Between [approximate Time Of Service: 7:30 A.m. And 9:00 A.m. Et] And To Include A Protein (such As Eggs And/or Meat), A Potato Dish, Assorted Pastries, Breakfast Breads, Bagels And Cream Cheese, Sliced Fresh Fruit And Yogurt, Freshly Brewed Coffee, Decaffeinated Coffee, Tea, Hot Water And Assorted Fruit Juices. morning Break To Be Served On Tuesday, Wednesday And Thursday Between [approximate Time Of Service: Tbd] And Shall Include, At A Minimum Refresher Of Coffee, Tea And Water. buffet Luncheon To Be Served On Tuesday And Wednesday Between [approximate Time Of Service: 11:45 A.m. And 1:15 P.m. Et]. Buffet Shall Be Set Up Outside The Large Plenary Meeting Room And Individuals Will Be Permitted To Bring Food Back Into The Large Plenary Meeting Room For Consumption. Typical Lunch Must Consist Of Chicken Or Comparable Entree, Seasonal Vegetables (an Offering Sufficient To Serve As Main Meal For Vegetarians And Vegans), A Starch, Bread Or Rolls/butter, Dessert, Juices, Coffee, Decaffeinated Coffee And Iced Tea. Please Provide Recommended Lunch Buffet Menus, With Prices Per Person Served With Regular And Decaffeinated Coffee, Water And Tea (iced Or Hot). afternoon Break Is To Be Served On Tuesday And Wednesday Between [approximate Time Of Service: Tbd] To Include Assorted Drinks, Bottled Water, Herbal Teas Along With A Snack That May Consist Of Cookies And/or Brownies, Whole Fruit, Or Chips. Provide Recommended List Of Beverages And Snacks And Their Related Prices. small Group Food And Beverage – Only Needed On Monday And Thursday Afternoon [approximate Time Of Service: Tbd]. The Estimated Number Of People Receiving This Service Is Up To 30 People And Is Subject To Change. small Group Breakfast To Be Served On Monday Between [approximate Time Of Service: 7:30 a.m. And 9:00 A.m. Et] And To Include A Protein (such As Eggs And/or Meat), A Potato Dish, Assorted Pastries, Breakfast Breads, Bagels And Cream Cheese, Sliced Fresh Fruit And Yogurt, Freshly Brewed Coffee, Decaffeinated Coffee, Tea, Hot Water And Assorted Fruit Juices. Please Provide Recommended Breakfast Menus, With Prices Per Person Served. small Group Luncheon To Be Served On Monday Between [approximate Time Of Service: 11:45 a.m. And 1:15 P.m. Et]. Typical Lunch Must Consist Of Chicken Or Comparable Entree, Seasonal Vegetables (an Offering Sufficient To Serve As Main Meal For Vegetarians And Vegans), A Starch, Bread Or Rolls/butter, Dessert, Brewed Coffee, Decaffeinated Coffee, Juices And Iced Tea. Please Provide Recommended Lunch Menus, With Prices Per Person Served. small Group Afternoon Break Is To Be Served On Monday [approximate Time Of Service: Tbd Et] To Include Assorted Drinks, Bottled Water, Herbal Teas Along With A Snack That May Consist Of Cookies And/or Brownies, Whole Fruit, Or Chips. Provide Recommended List Of Beverages And Snacks And Their Related Prices. small Group Afternoon Break Is To Be Served On Thursday [approximate Time Of Service: Tbd Et] To Include Assorted Drinks, Bottled Water, Herbal Teas Along With A Snack That May Consist Of Cookies And/or Brownies, Whole Fruit, Or Chips And A Hot Or Cold Food Item. Provide Recommended List Of Beverages, Snacks And Hot Or Cold Food Item And Their Related Prices. quoter Should Also Submit An All-day Food And Drink Package With A Per Person Rate Per Day. All Food And Beverage (f&b) Services Need To Be Located In Areas Accessible To Individuals With Disabilities. The Luncheon Should Be Arranged So That All Individuals Can Be Seated And Served Sufficiently. pricing For Food And Beverages Shall Include The Price For The Item(s), Plus The Gratuity (service Charge), And A Statement From The Contractor Indicating Whether The U.s. Government Is Exempt From State Tax, If Applicable. The Eeoc Is A Tax Exempt Federal Agency; Please Do Not Include Any Sales Tax In Quotations For Which The Federal Government Is Exempt. the Contracting Officer Representative (cor) Will Contact The Contractor Within 72 Hours Of The Event To Confirm The Number Of Participants. The Contractor Shall Provide Food And Beverage For A Minimum Of 250 Participants Each Day. The Contractor Shall Invoice The Eeoc At The Agreed Upon Rates For Meeting Room Rental, Audio Visual Equipment, Food And Beverages, And Business Services. Charges For Food And Beverage Service Shall Be Reflected On The Invoice As The Cost Incurred Per Person. clin 0003 – Rental Of Audio Visual Equipment And Technical Support: The Following Services And Audiovisual Equipment Will Be Required: large Plenary Meeting Room – Needed On Tuesday, Wednesday And Thursday. podium With Wired Microphone; Laptop Computer With Internet Connection [1 Each] hand-held Cordless Microphone [2 Each] table Top Microphone For Table Next To Podium [3 Each] mixer With Sufficient Tracks To Amplify Speech And Sound Audible To Entire Audience Gathered In The Meeting Room. projection Package Linked To Podium Laptop Computer. projection Screens Appropriate For Size Of Meeting Room [2 Each] av Package (movable Cart, Power Cord And Power Strip) technical Assistance In Setting Up All Equipment, Including Splitters In Order To Assure That All Registrants Can Hear And See All Presentations. equipment And Av Package Including A Technician To Enable Live Streaming Of Plenary Speaker(s) To Audience Participating Remotely. av Technician To Monitor And Maintain Speech And Sound At Audible Levels During Meetings Held In Meeting Space. medium Plenary Meeting Room – Needed On Tuesday, Wednesday And Thursday. podium With Wired Microphone; Laptop Computer With Internet Connection [1 Each] hand-held Cordless Microphone [2 Each] table Top Microphone For Table Next To Podium [3 Each] mixer With Sufficient Tracks To Amplify Speech And Sound Audible To Entire Audience Gathered In The Meeting Room. projection Package Linked To Podium Laptop Computer. projection Screens Appropriate For Size Of Meeting Room [2 Each] av Package (movable Cart, Power Cord And Power Strip) technical Assistance In Setting Up All Equipment, Including Splitters In Order To Assure That All Registrants Can Hear And See All Presentations. av Technician To Monitor And Maintain Speech And Sound At Audible Levels During Meetings Held In Meeting Space. breakout Room(s) – Needed On Tuesday, Wednesday And Thursday. If Hotel Only Provides Two Additional Breakout Rooms, Hotel Will Allow For Large Plenary And Medium Plenary Rooms To Be Repurposed For The Use Of Serving As Breakout Rooms. requirements For Room: podium With A Hand-held Wireless Microphone That Can Attach To The Podium. [1 Each] projection Screen Appropriate For Size Of Meeting Room [1 Each] av Package (movable Cart, Power Strip And Cord). small Group Meeting Room – Needed On Monday And Thursday. Requirements For Room: projection Screen Appropriate For Size Of Meeting Room [1 Each] projection And Av Package To Allow For Laptop To Be Connected And Projected On To Screen. the Contractor Must Submit A Detailed Pricelist For The Audio-visual Equipment And Technical Support, Including High Speed Wireless (wi-fi) Internet Access, And Electrical connections. Also, Include The Price For The Items, Inclusive Of An Hourly Rate And The Number Of Labor Hours With Breaks Included In A Day Rate For Audio Visual Support Services (if Needed), Plus The Gratuity/service Charge. clin 0004 – Business Services. Wi-fi Access For Presenters In Meeting Spaces: High Speed Wi-fi Connectivity For Presenters In All Meeting Spaces (large Plenary, Medium Plenary, Breakout Rooms, Small Group Meeting Room, Secured Office/working Room). business Center: Business Office Support (copying, Faxing, Etc.) May Be Required Throughout The Conference. Hotel Must Provide A Pricing List For Copying, Faxing, Shipping, And Receiving Charges For The Hotel To Include Any Surcharges And Taxes. receipt And Storing Of Materials: The Hotel Shall Have Procedures And Facilities In Place To Receive And Store All Conference Materials Shipped In Overnight Mail. Charges For This Service Shall Be Included In The Business Center Charges. pre-conference Meeting And Conditions: A Pre-conference Meeting Either Via Telephone, Zoom/teams, Or In-person To Be Held At The Contractor’s Facility To Discuss The Objectives Of The Conference, Meet Staff Responsible For Implementing The Contract And Address Any Questions Regarding Elements Of The Statement Of Work, Within A Mutually Agreed Upon Time Prior To The Start Of The Conference. signage: Signs And Floor Plans Directing Participants To The Meeting Rooms Shall Be Provided By The Facility. This Shall Include A Daily Electronic Announcement Board, Announcing The 2025 Joint Eeoc-fepa-tero Training Conference. The Electronic Board Shall Easily Be Visible To Participants And Identify Meeting Room Locations. other: It Is Anticipated That Some Additional And/or Miscellaneous Expenses Might Be Incurred During The Conference Such As Service And Set Up Charges, Electrical Hook-up Fees, And Other Necessary But Unpredictable Expenses Which May Arise During The Conference. All Anticipated Charges For Additional Work Or Deliveries Of Requirements Outside Of Those Stated In The Government Contract Must Be Approved By The Cor And Communicated To The Government’s Contracting Officer In Writing Prior To Acceptance Of The Related Invoice And Payment Processing. the Facility Shall Agree To Allow The Eeoc To Bring In Audio-visual And Other Equipment And Connect These To The Facility’s Audio Visual/public Address System, As Necessary. Reporting Requirements pre-award Reporting: In Their Quotation, The Quoter Must Submit A Detailed Breakdown Of All Cost To Include Lodging Rates, Meeting Space, Food And Beverage, Av Equipment, Labor And Service Costs, And Any Other Miscellaneous Charges, Which Are Necessary For The Success Of The Conference. Prior To Conference Reporting: The Contractor Will Provide The Designated Eeoc contact With Online Access To Hotel Reports With Information About Confirmed Room Reservations Or An Electronic List Of All Hotel Confirmation Numbers For All Participants, Staff And Presenters On A Weekly Basis Prior To The Conference. during Conference Reporting: In Addition To Pre-conference Meeting, There Will Be A Daily Reconciliation Of All Charges Incurred With The Eeoc Designated Representative. The Charges Will Include Food And Beverage, Av Equipment And Labor, Telecommunication And Business Center Charges. post Conference: The Contractor Shall Submit A Final Invoice Covering All Charges Within Five (5) Business Days After The Completion Of The Conference. The Contractor Shall Submit A Detailed Report With The Invoice That Consist Of The Following: Room Usage By Date And Attendee, Detailed Av Charges By Meeting Room And A Detailed Breakdown By Day For All Food And Beverage Charges And A Grand Total By Category For Reconciliations Of The Event. Period Of Performance period Of Performance-the Base Period Is From Date Of Award Through Execution Of The Fy 2025 Joint Fepa-tero Conference. contract Administration-inspection And Acceptance the Contracting Officer’s Representative (cor) Under The Resulting Contract Shall Be Designated At The Time Of The Contract Award. method Of Payment: The Preferred Payment Method Is Payment By Government-wide Commercial Purchase Card. The Contractor Is To Apply Charges To Government Purchase Card Only After Final Invoice Has Been Accepted And Reconciled By The Cor. cancellation: Should Eeoc Elect To Cancel This Contract, Eeoc Will Provide A Written Notification To The Contractor No Later Than Sixty (60) Calendar Days Prior To The Scheduled Event. By Receipt Of This Cancellation Notice, The Contractor Agrees To Release Eeoc From Any Cancellation Penalties Or Charges. If There Is A Cancellation Within Sixty (60) Calendar Days Of The Scheduled Event Date, Paragraph (l) Termination For The Government’s Convenience Or (m) Termination For Cause Of Far Clause 52.212-4, Contract Terms And Conditions - Commercial Items Will Govern. submission Of Quotation: All Interested Parties Shall Submit With Their Quotation A Detailed Breakdown Of All Costs To Include Conference Space, Rental Of Audiovisual Equipment And Technical Support, Food And Beverage Service, Business Services, And Any Other Miscellaneous Services And Equipment Which Are Necessary For The Success Of The Seminar. In Addition, A Price Quotation Utilizing Attachment 1, Quotation Response Form, Shall Be Included. Quotations Shall Be Submitted In Three (3) Separate Volumes As Follows: Volume 1 - Technical Capability; Volume 2 - Past Performance; And Volume 3 - Price. Pricing Must Be Submitted Using The Line Item Structure In The Above Schedule Of Supplies And Services Of This Rfq. A Separate Attachment May Be Included In Volume 3 For Pricing Information On Menu Items, Transportation, Parking, Applicable Tax Rates, And Sleeping Room Rates. Your Quotation In Response To Rfq 45310025q0008 Is Due January 17th, 2025 At 12:00 P.m. Et. Quotations Will Be Accepted Via E- Mail. If Electronic Copy Of The Quotation May Be Submitted Via E-mail, Addressed To Melisza.coates@eeoc.gov. questions: Questions Regarding This Request For Quotation Should Be Submitted To Melisza Coates, Contract Specialist Via E-mail At Melisza.coates@eeoc.gov. Telephone Inquiries Or Responses Are Not Acceptable. The Deadline For Submission Of Questions Regarding 45310025q0008 Is January 10, 2025, 12:00 P.m. Et. Any Questions Received After The Above Mentioned Date And Time Will Not Be Considered. The Government Will Not Reimburse Interested Parties For Any Cost Associated With Responding To This Business Opportunity. All Responsible Sources May Submit A Quotation Which Shall Be Considered By The Agency. The Anticipated Contract Award Date Is On Or Before February 28, 2025. basis For Award: The Government Intends To Award A Firm Fixed-price Contract To The Responsible Quoter Whose Quotation Is Responsive To The Solicitation And Is Determined To Be The Best Value To The Government, Using The Tradeoff Approach. Selection Of The Best Value To The government Will Be Achieved Through A Process Of Evaluating The Strengths And Weaknesses Of Each Quoter’s Quotation Against The Below Described Evaluation Criteria. In Determining The Best Value To The Government, The Technical Capability And Past Performance Evaluation Criteria, When Combined, Are More Important Than The Evaluated Price. The Government Is More Concerned About Obtaining A Superior Technical Capability Quotation Than Making An Award At The Lowest Evaluated Price. However, The Government Will Not Make An Award At A Price Premium It Considers Disproportionate To The Benefits Associated With The Evaluated Superiority Of One Technical And Management Quotation Over Another. Thus, To The Extent That Quoter’s Technical And Past Performance Quotations Are Evaluated As Close Or Similar In Merit, The Evaluated Price Is More Likely To Be A Determining Factor. evaluation Factors For Award: The Following Factors Shall Be Used To Evaluate Quotations. These Factors Are Listed In Their Relative Order Of Importance: Technical Capability, Past Performance, And Price. factor I – Technical Capability: contract Requirements quotations Will Be Evaluated On The Quoter’s Ability To Provide All The Contract Requirements Regarding Meeting Space, Food And Beverage, Audio-visual Equipment And Technical Support, Lodging, And Secured Storage. Quotations Must Address The Quoter’s Ability To Meet Ada Requirements For Accessibility As It Relates To Meeting Space, Lodging And Parking. Quotations Will Be Evaluated On The Quality Of The Customer Services Provided, The Layout Design And Quality Of The Facilities As Reflected By The Physical Layout And Atmosphere Of Meeting Space, Amenities Such As Free Wi-fi In The Conference Space, And Upkeep Of The Facilities. location. Quotations Will Be Evaluated On The Ability Of The Quoter To Provide A Facility In Downtown Phoenix, Arizona With Adequate Low Cost Or Free On-site Parking For Participants And Presenters. availability Of Dates. Quoters Will Be Evaluated On The Ability Of The Quoter To Provide The Required Services On The Dates Requested. Additional Consideration Will Be Given To Quoters Who Can Provide The Required Services On The Preferred (1st Choice) Dates. availability Of Government Rates: Quotations Will Be Evaluated On The Ability Of The Quoter To Provide The Required Lodging At Or Below The Government Rate Or Market Value For All Conference Participants And Presenters. meeting Space: Quotations Will Be Evaluated On The Ability Of The Quoter To Provide The Required Meeting Spaces Within The Statement Of Work. factor Ii – Past Performance: the Quoter Must Provide References For A Minimum Of Three (3) Government Or Non-government Contracts Which Provide The Same Or Similar Services; Contract Must Have Been Awarded Within The Past (3) Years. The Information For Each Reference Shall Include The Following: name And Address Of Government Agency And Other Non-government Client; name, Title, Email And Telephone Number Of Contracting Officer Or Other Point Of Contact; name, Title, Email And Telephone Number Of Client’s Program Manager, If Applicable; contract Number, Period Of Performance, And Total Dollar Value Of Contract; And description Of Services Provided. list Any Problems Encountered On Each Contract And The Contractor’s Corrective Actions. eeoc Will Evaluate Past Performance Based On Timeliness, Customer Service And Corrective Actions Taken (if Necessary). A Quoter Without A Record Of Relevant Past Performance Or For Whom Information On Past Performance Is Not Available Will Not Be Evaluated Favorably Or Unfavorably On Past Performance. factor Iii – Price: the Price Quotation Will Be Evaluated Against The Independent Government Price Estimate. Evaluation Of Quotations Will Consider The Following Pricing Information: Pricing Provided For All Line Items Listed In The Schedule Of Supplies And Services Of This Solicitation In The Units And Format Provided. supplemental Agreements – If Any Hotel Submitting A Quotation Has Any Supplemental Agreements, Those Agreements Must Be Submitted With Their Quotation. If The Hotel Requires Signature Of A Supplemental Agreement That Was Not Submitted With The Quotation, The Quotation Will Be Rejected. site Visits: The Eeoc Reserves The Right To Conduct A Site Visit Of All Quoters Who Are Rated To Be Technically Acceptable. The Site Visit Will Review And Evaluate The Same Technical Items Identified In The Technical Capabilities Portion Of The Technical Evaluation Factors. notice: The Government Intends To Evaluate Quotations And Make Award Without Discussions (except Clarifications As Described In Far 15.306(a)). Therefore, The Quoter’s Initial Quote Should Contain The Vendor’s Best Terms From A Price And Technical Standpoint. The Government Reserves The Right To Conduct Discussions, If The Contracting Officer Later Determines Them To Be Necessary. The Government Also Reserves The Right To Conduct A Site Visit Prior To Award. applicable Provisions And Clauses: The Provisions At 52.212-1, Instructions To Offerors – Commercial Products And Commercial Services Applies To This Acquisition. 52.212-2, Evaluation-commercial Products And Commercial Services, The Vendor Shall Include A Completed Copy Of The Provisions At 52.212-3, Offeror Representations And Certifications - Commercial Products And Commercial Services With Your Quote. The Clause 52.212-4, Contract Terms And Conditions-commercial Products And Commercial Services And Clause 52.212-5 Contract Terms And Conditions Required To Implement Statues Or Executive Order-commercial Products And Commercial Services, Clause 52.203.6, Restrictions On Subcontractor Sales To The Government, Clause 52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreement Or Statement, Clause 52.204-23, Prohibition On Contracting For Hardware, Software And Services Developed Or Provided By Kaspersky Lab Covered Entities, Clause 52.204-25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment, Clause 52.204-10 Reporting Executive Compensation And First –tier Subcontract Awards, Clause 52.209-6, Protecting The Government’s Interest When Subcontracting With Contractor’s Debarred, Suspended, Or Proposed For Debarment, Clause 52.209.10, Prohibition On Contracting With Inverted Domestic Corporations, Clause 52.222- 3 Convict Labor, Clause 52.222-19 Child Labor – Cooperation With Authorities And Remedies, Clause 52.222-21, Prohibition Of Segregated Facilities, Clause 52.222-26 Equal Opportunity, Clause 52.222-35 Equal Opportunity For Veterans, Clause 52.222-36 Equal Opportunity For Workers With Disabilities, Clause 52.222-37 Employment Reports On Veterans, Clause 52.222-40, Notification Of Employee Rights Under The National Labor Relations Act, Clause 52.222-41, Service Contract Labor Standards, Clause 52.222- 50 Combating Trafficking In Persons, Clause 52.222-52, Exemption From Application Of The Service Contract Labor Standard To Contracts For Certain Services-certification, Clause 52.226-8 Encouraging Contractor Policies To Ban Texting Messaging While Driving, Clause 52.225-13 Restrictions On Certain Foreign Purchases, Clause 52.232-33, Payment By Electronic Funds Transfer – System For Award Management Are Incorporated By Reference, Clause 52.232-40, Providing Accelerated Payments To Small Business Subcontractors. Clause 52.233-3 Protest After Award And Clause 52.233-4 Applicable Law For Breach Of Contract Claim. to Obtain The Above Provision/clauses In Full Text, Please Visit Https://www.acquisition.gov/far. Method Of Payment: Electronic Funds Transfer. rev. 004_10-01-2018

Details: Description Republic Of The Philippines Province Of Sorsogon Municipality Of Irosin Bids & Awards Committee Invitation To Bid For Supply & Delivery Of Hardware/materials For The Improvement/rehabilitation Of Brgy. San Isidro Communal Irrigation System 1. The Local Government Unit Of Irosin, Through The Mdrrmo(5% Calamity Fund) Intends To Apply The Sum Of Six Hundred Eighty Six Thousand Four Hundred Two Pesos (p 686,402.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Supply & Delivery Of Hardware/materials For The Improvement/rehabilitation Of Brgy. San Isidro Communal Irrigation System, Good-03-2025. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Name Of Contract : Supply & Delivery Of Hardware/materials For The Improvement/rehabilitation Of Brgy. San Isidro Communal Irrigation System Brief Description: 549.26 Kgs 16mm Diam Rsb/618.28 Kgs 12mm Diam Rsb/20kgs #16 Tie Wire/20 Pcs Hacksaw Blade/58 Pcs ½” Thk. Penolic Board/3000 Bd.ft. Coco Lumber/175 Kgs Assorted Cw Nail/96 Cu.m. Boulder/696 Bags Portland Cement/88 Cu.m. Washed Sand/22 Cu.m. Gravel Pea-size Approved Budget For The Contract : P 686,402.00 Contract Duration : 30 Calendar Days Delivery Period : 7 Calendar Days After The Issuance Of Notice To Proceed Source Of Fund : Mdrrmo(5% Calamity Fund) 2. The Local Government Unit Of Irosin Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Seven(7) Calendar Days. Bidders Should Have Completed For The Last Two(2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent(60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Local Government Unit Of Irosin And Inspect The Bidding Documents At The Address Given Below From 8:00 Am-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 21, 2025 Until January 28, 2025 From The Given Address And Philgeps Website And Lgu-irosin Website And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (p 1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees By Presenting In Person The Official Receipt Of Bid Documents To The Bac Office. 6. The Local Government Unit Of Irosin Will Not Hold A Pre-bid Conference. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before January 28, 2025, 8:59 Am At Bac Office, Municipal Compound, San Julian, Irosin, Sorsogon. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On January 28, 2025, 9:00 Am At The Given Address Below At The Conference Room, Office Of The Mayor, Municipal Compound, San Julian, Irosin, Sorsogon. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Irosin Reserves The Right To Accept Any And All Bids, Declare A Failure Of Bidding Or Not Award A Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations(irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11.for Further Information, Please Refer To: Benjamin M. Gabionza,ce/fritzie Riva L. Michelena Mun. Engineer/mdrrmo Municipal Compound, San Julian, Irosin, Sorsogon Url: Www.irosin.gov.ph 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website And Www.irosin.gov.ph Date Of Publication: January 21, 2025 _____________________ Noel D. Mercado Ii Bac Chairman Instruction To Bidders 1. Scope Of Bid The Procuring Entity, Local Government Unit Of Irosin Invites Bids For The Supply & Delivery Of Hardware/materials For The Improvement/rehabilitation Of Brgy. San Isidro Communal Irrigation System With Project Identification Number Good-03-2025. [note: The Project Identification Number Is Assigned By The Procuring Entity Based On Its Own Coding Scheme And Is Not The Same As The Philgeps Reference Number, Which Is Generated After The Posting Of The Bid Opportunity On The Philgeps Website. The Procurement Project (referred To Herein As “project”) Is Composed Of 1 Lot Hardware/materials, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For Mdrrmo(5% Calamity Fund) In The Amount Of Six Hundred Eighty Six Thousand Four Hundred Two Pesos (p 686,402.00). 2.2. The Source Of Funding Is: Six Hundred Eighty Six Thousand Four Hundred Two Pesos (p 686,402.00) 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manual And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Invitation To Bid By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Inspected The Site, Determined The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A.foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or B. Foreign Ownership Limited To Those Allowed Under The Rules May Participate In This Project. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No. 9184, The Bidder Shall Have An Slcc That Is At Least One(1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must At Least Equivalent To: A. For The Procurement Of Non- Expandable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.2 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 7.2 Subcontracting Is Not Allowed During The Bidding. 7.3 Subcontracting Is Not Allowed During The Contract Implementation Stage. 7.4 Subcontracting Of Any Portion Of The Project Does Not Relieve The Supplier Of Any Liability Or Obligation Under The Contract. The Supplier Will Be Responsible For The Acts, Defaults, And Negligence Of Any Subcontractor, Its Agents, Servants, Or Workmen As Fully As If These Were The Contractor’s Own Acts, Defaults, Or Negligence, Or Those Of Its Agents, Servants, Or Workmen. 8. Pre-bid Conference The Procuring Entity Will Not Hold A Pre-bid Conference. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii( Checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicted In Itb Clause 5.3 Should Have Completed Within The Last Two(2) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostile Convention, Only The Translated Documents Shall Be Authenticated Through The Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii( Checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification From Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 3184. 12. Bid Prices 12.1 Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A.for Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw(ex-works,ex-factory,ex-warehouse,ex-showroom, Or Off The Shelf, As Applicable); Ii. The Cost Of All Custom Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other(incidental) Services, If Any, Listed In The Bds. 13. Bid And Payment Currencies 14.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Adopted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreigh Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 14.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos 14. Bid Security 15.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 15.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty(120) Calendar Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission To The Given Website Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 16. Deadline For Submission Of Bids The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 18.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 18.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1 The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 14 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii(technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Option 1- One Project Having Several Items That Shall Be Awarded As One Contract. 20. Post Qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps), And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Supply & Delivery Of Hardware/materials For The Improvement/rehabilitation Of Brgy. San Isidro Communal Irrigation System Brief Description: 549.26 Kgs 16mm Diam Rsb/618.28 Kgs 12mm Diam Rsb/20kgs #16 Tie Wire/20 Pcs Hacksaw Blade/58 Pcs ½” Thk. Penolic Board/3000 Bd.ft. Coco Lumber/175 Kgs Assorted Cw Nail/96 Cu.m. Boulder/696 Bags Portland Cement/88 Cu.m. Washed Sand/22 Cu.m. Gravel Pea-size B. Completed Within The Last Two(2) Years From The Date Of The Submission Of Bids 7.1 Not Applicable Since Sub-contracting Is Not Allowed. 12 The Price Of Goods Shall Be Quoted Ddp Lgu-irosin, Irosin, Sorsogon. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration Or Any Of The Following Forms And Amounts: A. [two Percent (2%) Of Abc], If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; B. [five Percent (5%) Of Abc] If Bid Security Is In Surety Bond. 19.3 Hardware/materials 549.26 Kgs 16mm Diam Rsb/618.28 Kgs 12mm Diam Rsb/20kgs #16 Tie Wire/20 Pcs Hacksaw Blade/58 Pcs ½” Thk. Penolic Board/3000 Bd.ft. Coco Lumber/175 Kgs Assorted Cw Nail/96 Cu.m. Boulder/696 Bags Portland Cement/88 Cu.m. Washed Sand/22 Cu.m. Gravel Pea-size 20.2 Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It: Bir Registration 21.2 Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It: None General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract(scc). 2. Advance Payment 2.1 Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2 The Procuring Entity Is Allowed To Determine The Terms Of The Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr. 4. Inspection And Tests The Procuring Entity Or Its Representatives Shall Have The Right To Inspect And/or The Test The Goods To Confirm Their Conformity To The Project. In Addition To Tests In The Scc, Section Vii(technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identify Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 7.1. In Order To Assure The Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 7.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines] “the Delivery Terms Applicable To This Contract Are Delivered [indicate Place Of Destination]. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is Wilson G. Baliwas. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; D. Performance Or Supervision Or Maintenance And/or Repair Of The Supplied Goods, For A Period Of Time Agreed By The Parties, Provided That This Service Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And E. Training Of The Procuring Entity’s Personnel, At The Supplier’s Plant And/or On-site, In Assembly, Start-up, Operation, Maintenance, And/or Repair Of The Supplied Goods. F. No Additional Incidental Service Requirements. The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Spare Parts – The Supplier Is Required To Provide All Of The Following Materials, Notifications, And Information Pertaining To Spare Parts Manufactured Or Distributed By The Supplier: 1. Such Spare Parts As The Procuring Entity May Elect To Purchase From The Supplier, Provided That This Election Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And 2. In The Event Of Termination Of Production Of The Spare Parts: I. Advance Notification To The Procuring Entity Of The Pending Termination, In Sufficient Time To Permit The Procuring Entity To Procure Needed Requirements; And Ii. Following Such Termination, Furnishing At No Cost To The Procuring Entity, The Blueprints, Drawings, And Specifications Of The Spare Parts, If Requested. The Spare Parts And Other Components Required Are Listed In Section Vi (schedule Of Requirements) And The Costs Thereof Are Included In The Contract Price. The Supplier Shall Carry Sufficient Inventories To Assure Ex-stock Supply Of Consumable Spare Parts Or Components For The Goods For A Period Of Ninety (90) Calendar Days. Spare Parts Or Components Shall Be Supplied As Promptly As Possible, But In Any Case, Within Ninety (90) Calendar Days Of Placing The Order. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions Any Relevant Hazchem Classifications A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Intellectual Property Rights – The Supplier Shall Indemnify The Procuring Entity Against All Third-party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 2.2 Partial Payment Is Not Applicable. 4 The Inspections And Tests That Will Be Conducted Are: Inspection Of The Hardware/materials If It Follows The Technical Specification Set By The End-user Unit. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months Remarks Indicate Here Any Other Appropriate Information As May Be Necessary. Signature Over Printed Name Position Department/division Section Vii. Technical Specifications Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] Technical Specifications Technical Specifications Item / Service Maximum Quantity Technical Specifications / Scope Of Work Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution.] Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; (b) Registration From Sec, Department Of Trade And Industry(dti) For Sole Proprietorship And Cda For Cooperatives (c) Valid Mayor’s Permit By The City Or Municipality Where The Principal Place Of Business Is Located (d) Tax Clearance Per Eo 398 (e) Tax Clearance For Collection Purposes Technical Documents ⬜ (f) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (d) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (e) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (f) Original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (g) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. (h) Audited Financial Statement(afs) Audited Financial Statement Stamped, Received By The Bir Or Its Duly Accredited And Authorized Institutions, For The Immediately Preceding Calendar Year, Showing The Total Assets And Liabilities Which Should Not Be Earlier Than Two(2) Years From The Date Of Bid Submission Class “b” Documents ⬜ (i) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (j) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (k) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (l) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (m) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.   Omnibus Sworn Statement(revised) Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. Select One, Delete The Other: If A Sole Proprietorship: I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. Select One, Delete The Other: If A Sole Proprietorship: As The Owner And Sole Proprietor Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] As Shown In The Attached Duly Notarized Special Power Of Attorney; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g. Duly Notarized Secretary’s Certificate, Board/partnership Resolution Or Special Power Of Attorney, Whichever Is Applicable]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For And In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. Select One, Delete The Rest: If A Sole Proprietorship: The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Partnership Or Cooperative: None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Corporation Or Joint Venture: None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Following Responsibilities As A Bidder: A) Carefully Examine All Of The Bidding Documents; B) Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C) Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D) Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay, Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Of Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling(estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 Series Of 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This ___________ Day Of __________________, 2025 At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory [insert Signatory’s Legal Capacity] Affiant Subscribed And Sworn To Before Me A Notary Public For And Within The Province/city Pf __________________, On This ________ Day Of _______________, 2025 At __________________________ By The Above Named Affiant With His/her __________________ As The Competent Evidence Of His/her Identity And Avows Under Penalty Of Law That All The Statements Contained On This Instrument Are True And Correct. Doc. No. ______________ Page No: ______________ Book No. ______________ Series Of 2025. Republic Of The Philipppines ) City Of Sorsogon ) S.s. X ---------------------------------------------------x Bid Securing Declaration Project Identification No. ______ To: [insert Name And Address Of Procuring Entity] I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid-securing Declaration. 2. I/we Accept That: (a) I Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of Two(2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen(15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1(f) Of The Irr Of Ra No. 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid-securing Declaration Shall Cease To Be Valid On The Following Circumstances: (a) Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; (b) I Am Declared Ineligible Or Post Disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; And (c) I Am/we Declared As The Bidder With The Lowest Calculated And Responsive Bid And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I Have Hereunto Set My Hand This _____ Day Of ________, 2025 At __________________. _____________________________________ Bidder’s Representative/authorized Signatory [insert Signatory’s Legal Capacity] Affiant Subscribed And Sworn To Before Me A Notary Public For And Within The Province/city Pf __________________, On This ________ Day Of _______________, 2025 At __________________________ By The Above Named Affiant With His/her __________________ As The Competent Evidence Of His/her Identity And Avows Under Penalty Of Law That All The Statements Contained On This Instrument Are True And Correct. Doc. No. __________ Page No. __________ Book No. __________ Series Of 2025. Bid Form For The Procurement Of Goods (shall Be Submitted With The Bid) Bid Form Date: _____________________________ Project Identification No.: _____________ To: [name And Address Of Procuring Entity] Having Examined The Philippine Bidding Documents(pbds) Including The Supplemental Or Bid Bulletin Numbers_____, The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To (supply/deliver/perform) (description Of The Goods) In Conformity With The Said Pbds For The Sum Of (total Bid Amount In Words And Figures) Or The Total Calculated Bid Price, As Evaluated And Corrected For Computational Errors , And Other Bid Modifications In Accordance With The Price Schedules Attached Herewith And Made Part Of This Bid. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To (specify The Applicable Taxes, E.g. (i) Value Added Tax, (ii) Income Tax, (iii) Local Taxes, And (iv) Other Fiscal Levies And Duties), Which Are Itemized Herein Or In The Price Schedules. If Our Bid Is Accepted, We Undertake: A.to Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements Of The Philippine Bidding Documents(pbds); B. To Provide A Performance Security In The Form, Amounts, And Within The Times Prescribed In The Pbds; C. To Abide By The Bid Validity Specified In The Pbds And It Shall Remain Binding Upon Us At Any Time Before The Expiration Of That Period. Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/conform That We Comply With The Eligibility Requirements Pursuant To The Pbds. The Undersigned Is Authorized To Submit The Bid On Behalf Of (name Of The Bidder) As Evidenced By The Attached (state The Written Authority). We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Including, The Attached Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Name: Legal Capacity: Signed: Duly Authorized To Sign The Bid For And On Behalf Of: Date: ___________ Contract Agreement For The Procurement Of Goods(revised) __________________________________________________________________________ This Agreement, Made The _________ Day Of _______________, ________ Between [name And Address Of Procuring Entity] Of The Philippines (hereinafter Called The“entity”) Of The One Part And [name Of Supplier] (hereinafter Called The “supplier”) Of The Other Part. Whereas, The Entity Invited Bids For Certain Goods And Ancillary Services, Particularly (brief Description Of Goods And Services) And Has Accepted A Bid By The Supplier For The Supply Of Those Goods And Services In The Sum Of (contract Price In Words And Figures In Specified Currency) (hereinafter Called The “contract Price”). Now This Agreement Witnesseth As Follows: 1. In This Agreement, Words And Expressions Shall Have The Same Meanings As Are Respectively Assigned To Them In The Conditions Of Contract Hereinafter Referred To. 2. The Following Documents As Required By The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 Shall Be Deemed To Form And Be Read And Construed As Part Of This Agreement, Viz.: I. Philippine Bidding Documents(pbds) I. Schedule Of Requirements; Ii.technical Specifications; Iii.bill Of Quantities Iv.general And Special Conditions Of Contract; V.supplemental Or Bid Bulletins, If Any Ii. Winning Bidder’s Bid, Including The Eligibility Requirements, Technical And Financial Proposals, And All Other Documents Or Statements Submitted; Bid Form, Including All The Documents/statements Submitted; Bid Form, Including All The Documents/statements Contained In The Bidder’s Bidding Envelopes, As Annexes, And All Other Documents Submitted(e.g., Bidder’s Response To Request For Clarifications On The Bid), Including Corrections To The Bid, If Any, Resulting From The Procuring Entity’s Bid Evaluation; C. Performance Security D. Notice Of Award Of Contract And The Bidder’s Conforme Thereto; And E. Other Contract Documents That May Be Required By Existing Laws And/or The Procuring Entity Concerned In The Pbds. Winning Bidder Agrees That Additional Contract Documents Or Information Prescribed By The Gppb That Are Subsequently Required For Submission After The Contract Execution, Such As The Notice To Proceed, Variation Orders And Warranty Security, Shall Likewise Form Part Of The Contract. 3. In Consideration For The Sum Of [total Contract Price In Words And Figures) Or Such Other Sums As May Be Ascertained, [name Of Bidder] Agrees To Execute The [state The Object Of The Contract] In Accordance With His/her/its Bid. 4. The [name Of The Procuring Entity] To Pay The Above-mentioned Sum In Accordance With The Terms Of Bidding. In Witness, Whereof The Parties Thereto Have Caused This Agreement To Be Executed The Day And Year First Before Written. Binding Signature Of The Procuring Entity: Binding Signature Of Supplier: Insert Name And Signature] [insert Name And Signature] [insert Signatory’s Legal Capacity] [insert Signatory’s Legal Capacity] Signed In The Presence Of: ______________________ ________________ Liaison Officer For: For: [insert Procuring Entity] [insert Name Of Supplier] Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. ______________ Page No: ______________ Book No. ______________ Series Of 2025. Bill Of Quantities Item No. Item Quantity Unit Unit Price Total Price Prepared By: ______________ Proprietor

Details: Description Republic Of The Philippines Province Of Sorsogon Municipality Of Irosin Bids & Awards Committee Invitation To Bid For Supply & Delivery Of Dietary Supplements For Philippine Multisectoral Nutrition Project(pmnp) 1. The Local Government Unit Of Irosin, Through The Trust Fund(pmnp) Intends To Apply The Sum Of Seven Hundred Thirty Nine Thousand Eight Hundred Thirty One Pesos And Fifty Centavos(p 739,831.50) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Supply & Delivery Of Dietary Supplements For Philippine Multisectoral Nutrition Project(pmnp), Good-02-2025. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Name Of Contract : Supply & Delivery Of Dietary Supplements For Philippine Multisectoral Nutrition Project(pmnp) Brief Description: 560packs Instant Beef Bulalo With Vegetables 100grms/ 560packs Instant Chicken Arroz Caldo With Vegetables 100grms/ 480packs Instant Chicken Tinola With Malunggay 100grms/ 480packs Instant Champorado 100grms/560packs Chicken Sopas With Vegetables100 Grms/ 480packs Cheese Macaroni Soup 100grms/ 480packs Nutri Oats Sweet Corn 100grms/ 560packs Nutri Mongo And Pasas 100grms/ 560packs Nutricookies Squash 100grms/ 480packs High Protein Biscuits-butter 100grms/ 560packs Nutricookies With Real Strawberries 100grms/ 480packs Vegetables Crackers Malunggay 100grms/ 480packs Nutricookies Lemon 100grms/480 Packs Nutricookines Butter 100grms/ 1350packs Instant Beef Bulalo With Vegetables 60grms/ 1350packs Instant Chicken Arroz Caldo With Vegetables 60grms/ 1350packs Instant Chicken Tinola With Malunggay 6-grms/ 1200packs Instant Champorado 60grms/ 1350packs Ready To Cook Ginataang Monggo With Alugbati 60grms/1200packs Chicken Sopas With Vegetables 60grms/ 1350packs Cheese Macaroni Soup 60grms/ 1200packs Nutri Oats Sweet Corn 60grms/ 4050packs Instant Nutriblend Chocolate 60grms/ 1350packs Nutricookies Squash 60grms/ 1350packs High Protein Biscuits-butter 60grms/ 1350packs Nutricookies With Real Strawberries 60grms/ 1200packs Vegetable Crackers Malunggay 60grms/ 1200packs Nutricookies Lemon 60grms/ 1200packs Nutricookies Butter 60grms Approved Budget For The Contract : P 739,831.50 Contract Duration : 30 Calendar Days Delivery Period : 7 Calendar Days After The Issuance Of Notice To Proceed Source Of Fund : Trust Fund-phic Reimbursement (e-konsulta Package) 2. The Local Government Unit Of Irosin Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Seven(7) Calendar Days. Bidders Should Have Completed For The Last Two(2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent(60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Local Government Unit Of Irosin And Inspect The Bidding Documents At The Address Given Below From 8:00 Am-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 8, 2025 Until January 15, 2025 From The Given Address And Philgeps Website And Lgu-irosin Website And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (p 1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees By Presenting In Person The Official Receipt Of Bid Documents To The Bac Office. 6. The Local Government Unit Of Irosin Will Not Hold A Pre-bid Conference. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before January 15, 1:59 Pm At Bac Office, Municipal Compound, San Julian, Irosin, Sorsogon. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On January 15, 2025, 2:00 Pm At The Given Address Below At The Conference Room, Office Of The Mayor, Municipal Compound, San Julian, Irosin, Sorsogon. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Irosin Reserves The Right To Accept Any And All Bids, Declare A Failure Of Bidding Or Not Award A Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations(irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11.for Further Information, Please Refer To: Emelyn A. Vidar Mnao Municipal Compound, San Julian, Irosin, Sorsogon Url: Www.irosin.gov.ph 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website And Www.irosin.gov.ph Date Of Publication: January 8, 2025 _____________________ Noel D. Mercado Ii Bac Chairman Instruction To Bidders 1. Scope Of Bid The Procuring Entity, Local Government Unit Of Irosin Invites Bids For The Supply & One(1) Unit Dietary Supplements For Philippine Multisectoral Nutrition Project(pmnp) With Project Identification Number Good-02-2025. [note: The Project Identification Number Is Assigned By The Procuring Entity Based On Its Own Coding Scheme And Is Not The Same As The Philgeps Reference Number, Which Is Generated After The Posting Of The Bid Opportunity On The Philgeps Website. The Procurement Project (referred To Herein As “project”) Is Composed Of 1 Lot Dietary Supplements, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For Trust Fund Pmnp) In The Amount Of Seven Hundred Thirty Nine Thousand Eight Hundred Thirty One Pesos And Fifty Centavos(p 739,831.50). 2.2. The Source Of Funding Is: Trust Fund(pmnp) 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manual And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Invitation To Bid By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Inspected The Site, Determined The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A.foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or B. Foreign Ownership Limited To Those Allowed Under The Rules May Participate In This Project. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No. 9184, The Bidder Shall Have An Slcc That Is At Least One(1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must At Least Equivalent To: A. For The Procurement Of Non- Expandable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.2 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 7.2 Subcontracting Is Not Allowed During The Bidding. 7.3 Subcontracting Is Not Allowed During The Contract Implementation Stage. 7.4 Subcontracting Of Any Portion Of The Project Does Not Relieve The Supplier Of Any Liability Or Obligation Under The Contract. The Supplier Will Be Responsible For The Acts, Defaults, And Negligence Of Any Subcontractor, Its Agents, Servants, Or Workmen As Fully As If These Were The Contractor’s Own Acts, Defaults, Or Negligence, Or Those Of Its Agents, Servants, Or Workmen. 8. Pre-bid Conference The Procuring Entity Will Hold Not A Pre-bid Conference. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii( Checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicted In Itb Clause 5.3 Should Have Completed Within The Last Two(2) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostile Convention, Only The Translated Documents Shall Be Authenticated Through The Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii( Checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification From Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 3184. 12. Bid Prices 12.1 Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A.for Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw(ex-works,ex-factory,ex-warehouse,ex-showroom, Or Off The Shelf, As Applicable); Ii. The Cost Of All Custom Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other(incidental) Services, If Any, Listed In The Bds. 13. Bid And Payment Currencies 14.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Adopted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreigh Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 14.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos 14. Bid Security 15.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 15.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty(120) Calendar Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission To The Given Website Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 16. Deadline For Submission Of Bids The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 18.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 18.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1 The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 14 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii(technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Option 1- One Project Having Several Items That Shall Be Awarded As One Contract. 20. Post Qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps), And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Supply & Delivery Of Dietary Supplements For Philippine Multisectoral Nutrition Project(pmnp) Brief Description: 560packs Instant Beef Bulalo With Vegetables 100grms/ 560packs Instant Chicken Arroz Caldo With Vegetables 100grms/ 480packs Instant Chicken Tinola With Malunggay 100grms/ 480packs Instant Champorado 100grms/560packs Chicken Sopas With Vegetables100 Grms/ 480packs Cheese Macaroni Soup 100grms/ 480packs Nutri Oats Sweet Corn 100grms/ 560packs Nutri Mongo And Pasas 100grms/ 560packs Nutricookies Squash 100grms/ 480packs High Protein Biscuits-butter 100grms/ 560packs Nutricookies With Real Strawberries 100grms/ 480packs Vegetables Crackers Malunggay 100grms/ 480packs Nutricookies Lemon 100grms/480 Packs Nutricookines Butter 100grms/ 1350packs Instant Beef Bulalo With Vegetables 60grms/ 1350packs Instant Chicken Arroz Caldo With Vegetables 60grms/ 1350packs Instant Chicken Tinola With Malunggay 6-grms/ 1200packs Instant Champorado 60grms/ 1350packs Ready To Cook Ginataang Monggo With Alugbati 60grms/1200packs Chicken Sopas With Vegetables 60grms/ 1350packs Cheese Macaroni Soup 60grms/ 1200packs Nutri Oats Sweet Corn 60grms/ 4050packs Instant Nutriblend Chocolate 60grms/ 1350packs Nutricookies Squash 60grms/ 1350packs High Protein Biscuits-butter 60grms/ 1350packs Nutricookies With Real Strawberries 60grms/ 1200packs Vegetable Crackers Malunggay 60grms/ 1200packs Nutricookies Lemon 60grms/ 1200packs Nutricookies Butter 60grms B. Completed Within The Last Two(2) Years From The Date Of The Submission Of Bids 7.1 Not Applicable Since Sub-contracting Is Not Allowed. 12 The Price Of Goods Shall Be Quoted Ddp Lgu-irosin, Irosin, Sorsogon. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration Or Any Of The Following Forms And Amounts: A. [two Percent (2%) Of Abc], If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; B. [five Percent (5%) Of Abc] If Bid Security Is In Surety Bond. 19.3 Dietary Supplements 560packs Instant Beef Bulalo With Vegetables 100grms/ 560packs Instant Chicken Arroz Caldo With Vegetables 100grms/ 480packs Instant Chicken Tinola With Malunggay 100grms/ 480packs Instant Champorado 100grms/560packs Chicken Sopas With Vegetables100 Grms/ 480packs Cheese Macaroni Soup 100grms/ 480packs Nutri Oats Sweet Corn 100grms/ 560packs Nutri Mongo And Pasas 100grms/ 560packs Nutricookies Squash 100grms/ 480packs High Protein Biscuits-butter 100grms/ 560packs Nutricookies With Real Strawberries 100grms/ 480packs Vegetables Crackers Malunggay 100grms/ 480packs Nutricookies Lemon 100grms/480 Packs Nutricookines Butter 100grms/ 1350packs Instant Beef Bulalo With Vegetables 60grms/ 1350packs Instant Chicken Arroz Caldo With Vegetables 60grms/ 1350packs Instant Chicken Tinola With Malunggay 6-grms/ 1200packs Instant Champorado 60grms/ 1350packs Ready To Cook Ginataang Monggo With Alugbati 60grms/1200packs Chicken Sopas With Vegetables 60grms/ 1350packs Cheese Macaroni Soup 60grms/ 1200packs Nutri Oats Sweet Corn 60grms/ 4050packs Instant Nutriblend Chocolate 60grms/ 1350packs Nutricookies Squash 60grms/ 1350packs High Protein Biscuits-butter 60grms/ 1350packs Nutricookies With Real Strawberries 60grms/ 1200packs Vegetable Crackers Malunggay 60grms/ 1200packs Nutricookies Lemon 60grms/ 1200packs Nutricookies Butter 60grms 20.2 Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It: Bir Registration 21.2 Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It: None General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract(scc). 2. Advance Payment 2.1 Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2 The Procuring Entity Is Allowed To Determine The Terms Of The Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr. 4. Inspection And Tests The Procuring Entity Or Its Representatives Shall Have The Right To Inspect And/or The Test The Goods To Confirm Their Conformity To The Project. In Addition To Tests In The Scc, Section Vii(technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identify Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 7.1. In Order To Assure The Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 7.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines] “the Delivery Terms Applicable To This Contract Are Delivered [indicate Place Of Destination]. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is Wilson G. Baliwas. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; D. Performance Or Supervision Or Maintenance And/or Repair Of The Supplied Goods, For A Period Of Time Agreed By The Parties, Provided That This Service Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And E. Training Of The Procuring Entity’s Personnel, At The Supplier’s Plant And/or On-site, In Assembly, Start-up, Operation, Maintenance, And/or Repair Of The Supplied Goods. F. No Additional Incidental Service Requirements. The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Spare Parts – The Supplier Is Required To Provide All Of The Following Materials, Notifications, And Information Pertaining To Spare Parts Manufactured Or Distributed By The Supplier: 1. Such Spare Parts As The Procuring Entity May Elect To Purchase From The Supplier, Provided That This Election Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And 2. In The Event Of Termination Of Production Of The Spare Parts: I. Advance Notification To The Procuring Entity Of The Pending Termination, In Sufficient Time To Permit The Procuring Entity To Procure Needed Requirements; And Ii. Following Such Termination, Furnishing At No Cost To The Procuring Entity, The Blueprints, Drawings, And Specifications Of The Spare Parts, If Requested. The Spare Parts And Other Components Required Are Listed In Section Vi (schedule Of Requirements) And The Costs Thereof Are Included In The Contract Price. The Supplier Shall Carry Sufficient Inventories To Assure Ex-stock Supply Of Consumable Spare Parts Or Components For The Goods For A Period Of Three(3)months. Spare Parts Or Components Shall Be Supplied As Promptly As Possible, But In Any Case, Within Three(3)months Of Placing The Order. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions Any Relevant Hazchem Classifications A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Intellectual Property Rights – The Supplier Shall Indemnify The Procuring Entity Against All Third-party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 2.2 Partial Payment Is Not Applicable. 4 The Inspections And Tests That Will Be Conducted Are: Inspection Of The Hematology Analyzer To Be Delivered And If It Follows The Technical Specification Set By The End-user Unit. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Remarks Indicate Here Any Other Appropriate Information As May Be Necessary. Signature Over Printed Name Position Department/division Section Vii. Technical Specifications Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] Technical Specifications Technical Specifications Item / Service Maximum Quantity Technical Specifications / Scope Of Work Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution.] Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; (b) Registration From Sec, Department Of Trade And Industry(dti) For Sole Proprietorship And Cda For Cooperatives (c) Valid Mayor’s Permit By The City Or Municipality Where The Principal Place Of Business Is Located (d) Tax Clearance Per Eo 398 Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (d) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (e) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (f) Original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (g) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. (h) Audited Financial Statement(afs) Audited Financial Statement Stamped, Received By The Bir Or Its Duly Accredited And Authorized Institutions, For The Immediately Preceding Calendar Year, Showing The Total Assets And Liabilities Which Should Not Be Earlier Than Two(2) Years From The Date Of Bid Submission Class “b” Documents ⬜ (i) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (j) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (k) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (l) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (m) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.   Omnibus Sworn Statement(revised) Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. Select One, Delete The Other: If A Sole Proprietorship: I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. Select One, Delete The Other: If A Sole Proprietorship: As The Owner And Sole Proprietor Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] As Shown In The Attached Duly Notarized Special Power Of Attorney; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g. Duly Notarized Secretary’s Certificate, Board/partnership Resolution Or Special Power Of Attorney, Whichever Is Applicable]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For And In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. Select One, Delete The Rest: If A Sole Proprietorship: The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Partnership Or Cooperative: None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Corporation Or Joint Venture: None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Following Responsibilities As A Bidder: A) Carefully Examine All Of The Bidding Documents; B) Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C) Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D) Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay, Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Of Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling(estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 Series Of 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This ___________ Day Of __________________, 2024 At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory [insert Signatory’s Legal Capacity] Affiant Subscribed And Sworn To Before Me A Notary Public For And Within The Province/city Pf __________________, On This ________ Day Of _______________, 2024 At __________________________ By The Above Named Affiant With His/her __________________ As The Competent Evidence Of His/her Identity And Avows Under Penalty Of Law That All The Statements Contained On This Instrument Are True And Correct. Doc. No. ______________ Page No: ______________ Book No. ______________ Series Of 2024. Republic Of The Philipppines ) City Of Sorsogon ) S.s. X ---------------------------------------------------x Bid Securing Declaration Project Identification No. ______ To: [insert Name And Address Of Procuring Entity] I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid-securing Declaration. 2. I/we Accept That: (a) I Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of Two(2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen(15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1(f) Of The Irr Of Ra No. 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid-securing Declaration Shall Cease To Be Valid On The Following Circumstances: (a) Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; (b) I Am Declared Ineligible Or Post Disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; And (c) I Am/we Declared As The Bidder With The Lowest Calculated And Responsive Bid And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I Have Hereunto Set My Hand This _____ Day Of ________, 2024 At __________________. _____________________________________ Bidder’s Representative/authorized Signatory [insert Signatory’s Legal Capacity] Affiant Subscribed And Sworn To Before Me A Notary Public For And Within The Province/city Pf __________________, On This ________ Day Of _______________, 2024 At __________________________ By The Above Named Affiant With His/her __________________ As The Competent Evidence Of His/her Identity And Avows Under Penalty Of Law That All The Statements Contained On This Instrument Are True And Correct. Doc. No. __________ Page No. __________ Book No. __________ Series Of 2024. Bid Form For The Procurement Of Goods (shall Be Submitted With The Bid) Bid Form Date: _____________________________ Project Identification No.: _____________ To: [name And Address Of Procuring Entity] Having Examined The Philippine Bidding Documents(pbds) Including The Supplemental Or Bid Bulletin Numbers_____, The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To (supply/deliver/perform) (description Of The Goods) In Conformity With The Said Pbds For The Sum Of (total Bid Amount In Words And Figures) Or The Total Calculated Bid Price, As Evaluated And Corrected For Computational Errors , And Other Bid Modifications In Accordance With The Price Schedules Attached Herewith And Made Part Of This Bid. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To (specify The Applicable Taxes, E.g. (i) Value Added Tax, (ii) Income Tax, (iii) Local Taxes, And (iv) Other Fiscal Levies And Duties), Which Are Itemized Herein Or In The Price Schedules. If Our Bid Is Accepted, We Undertake: A.to Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements Of The Philippine Bidding Documents(pbds); B. To Provide A Performance Security In The Form, Amounts, And Within The Times Prescribed In The Pbds; C. To Abide By The Bid Validity Specified In The Pbds And It Shall Remain Binding Upon Us At Any Time Before The Expiration Of That Period. Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/conform That We Comply With The Eligibility Requirements Pursuant To The Pbds. The Undersigned Is Authorized To Submit The Bid On Behalf Of (name Of The Bidder) As Evidenced By The Attached (state The Written Authority). We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Including, The Attached Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Name: Legal Capacity: Signed: Duly Authorized To Sign The Bid For And On Behalf Of: Date: ___________ Contract Agreement For The Procurement Of Goods(revised) __________________________________________________________________________ This Agreement, Made The _________ Day Of _______________, ________ Between [name And Address Of Procuring Entity] Of The Philippines (hereinafter Called The“entity”) Of The One Part And [name Of Supplier] (hereinafter Called The “supplier”) Of The Other Part. Whereas, The Entity Invited Bids For Certain Goods And Ancillary Services, Particularly (brief Description Of Goods And Services) And Has Accepted A Bid By The Supplier For The Supply Of Those Goods And Services In The Sum Of (contract Price In Words And Figures In Specified Currency) (hereinafter Called The “contract Price”). Now This Agreement Witnesseth As Follows: 1. In This Agreement, Words And Expressions Shall Have The Same Meanings As Are Respectively Assigned To Them In The Conditions Of Contract Hereinafter Referred To. 2. The Following Documents As Required By The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 Shall Be Deemed To Form And Be Read And Construed As Part Of This Agreement, Viz.: I. Philippine Bidding Documents(pbds) I. Schedule Of Requirements; Ii.technical Specifications; Iii.bill Of Quantities Iv.general And Special Conditions Of Contract; V.supplemental Or Bid Bulletins, If Any Ii. Winning Bidder’s Bid, Including The Eligibility Requirements, Technical And Financial Proposals, And All Other Documents Or Statements Submitted; Bid Form, Including All The Documents/statements Submitted; Bid Form, Including All The Documents/statements Contained In The Bidder’s Bidding Envelopes, As Annexes, And All Other Documents Submitted(e.g., Bidder’s Response To Request For Clarifications On The Bid), Including Corrections To The Bid, If Any, Resulting From The Procuring Entity’s Bid Evaluation; C. Performance Security D. Notice Of Award Of Contract And The Bidder’s Conforme Thereto; And E. Other Contract Documents That May Be Required By Existing Laws And/or The Procuring Entity Concerned In The Pbds. Winning Bidder Agrees That Additional Contract Documents Or Information Prescribed By The Gppb That Are Subsequently Required For Submission After The Contract Execution, Such As The Notice To Proceed, Variation Orders And Warranty Security, Shall Likewise Form Part Of The Contract. 3. In Consideration For The Sum Of [total Contract Price In Words And Figures) Or Such Other Sums As May Be Ascertained, [name Of Bidder] Agrees To Execute The [state The Object Of The Contract] In Accordance With His/her/its Bid. 4. The [name Of The Procuring Entity] To Pay The Above-mentioned Sum In Accordance With The Terms Of Bidding. In Witness, Whereof The Parties Thereto Have Caused This Agreement To Be Executed The Day And Year First Before Written. Binding Signature Of The Procuring Entity: Binding Signature Of Supplier: Insert Name And Signature] [insert Name And Signature] [insert Signatory’s Legal Capacity] [insert Signatory’s Legal Capacity] Signed In The Presence Of: ______________________ ________________ Liaison Officer For: For: [insert Procuring Entity] [insert Name Of Supplier] Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. ______________ Page No: ______________ Book No. ______________ Series Of 2024. Bill Of Quantities Item No. Item Quantity Unit Unit Price Total Price Prepared By: ______________ Proprietor

Details: Description Republic Of The Philippines Department Of Justice Bureau Of Corrections Muntinlupa City Philippine Bidding Documents Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) (procurement/contract No. 009) Sixth Edition July 2020 Bids And Awards Committee 202 Table Of Contents Section I. Invitation To Bid 3 Section Ii. Instructions To Bidders 6 Section Iii. Bid Data Sheet 13 Section Iv. General Conditions Of Contract 19 Section V. Special Conditions Of Contract 24 Section Vi. Specifications 26 Section Vii. Drawings 59 Section Viii. Bill Of Quantities 60 Section Ix. Checklist Of Technical And Financial Documents 61 Section I. Invitation To Bid Republic Of The Philippines Department Of Justice Bureau Of Corrections Muntinlupa City Invitation To Bid Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) 1. The Bureau Of Corrections, Through The National Expenditure Program (nep) Of 2025 Capital Outlay, Intends To Apply The Sum Of Three Hundred Million Pesos Only (₱300,000,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) With Identification Number _epa-009__. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Bureau Of Corrections Now Invites Bids For Provision Of A Detailed Preliminary Architectural And Engineering Design, Detailed Engineering Requirements And Actual Construction Of The Bureau Of Corrections Super Maximum Security Facility, Based On The Final Detailed Architectural And Engineering Design, To Be Approved By The Head Of Procuring Entity Or Its Duly Authorized Representative Conformably With The Minimum Standards Set Forth In The (1) Presidential Decree (pd) No. 1096, National Building Code Of The Philippines (2) Batas Pambansa (bp)blg. 344, An Act To Enhance The Mobility Of Disabled Persons By Requiring Certain Public Buildings, Institutions, Establishments And Public Utilities To Install Facilities And Other Devices (3) National Structural Code Of The Philippines (nscp), Volume I, 2010 (4) Philippine Electrical Code (pec), 2009 (5) Revised Plumbing Code Of The Philippines (6) Revised Irr Of Ra 10575 (7) Republic Act (ra) No. 9514, Revised Fire Code Of The Philippines And (8) Applicable Local Regulations And Ordinances. Completion Of The Works Is Required Within Three Hundred Sixty-five (365) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project Amounting To At Least Fifty Percent (50%) Of The Abc Within The Last Six (6) Years. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act.” Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperatives, And Partnerships Or Organizations With At Least Seventy-five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From Bureau Of Corrections And Inspect The Bidding Documents At The Address Given Below From Monday To Friday From 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On _december 28, 2024 (08:00am To 05:00pm) To January 20, 2025 (01:29 Pm)_____ From The Given Address And Website(s) Below. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity Bucor.gov.ph, Provided That Bidders Shall Pay The Applicable Fee Of Fifty Thousand (₱50,000.00) Pesos Only For The Bidding Documents Not Later Than The Submission Of Their Bids. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person Or By Facsimile. 6. The Bureau Of Corrections Will Hold A Pre-bid Conference On _january 06, 2025 (01:30pm)__ At Bac Conference Room Nbp Reservation Muntinlupa City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below, On Or Before __january 20, 2025 (01:30pm)_____. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On __january 20, 2025 (01:30pm)____ At The Bac Conference Room Nbp Reservation Muntinlupa City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Bureau Of Corrections Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Ma. Adoracion I. Viñas Office Of The Bac Secretariat Supply Office, Bureau Of Corrections, Muntinlupa City Tel # 02-8809-8587/02-8478-0907 Bacsec2022@gmail.com 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Bucor.gov.ph Date Of Issue: _______________ Ccsupt Celso S Bravo Chairperson, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Bureau Of Corrections Invites Bids For The Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf), With Project Identification Number__________________. [note: The Project Identification Number Is Assigned By The Procuring Entity Based On Its Own Coding Scheme And Is Not The Same As The Philgeps Reference Number, Which Is Generated After The Posting Of The Bid Opportunity On The Philgeps Website.] The Procurement Project Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) Is For The Construction Of Works, As Described In Section Vi (specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2025 In The Amount Of Three Hundred Million Pesos Only (₱300,000,000.00). 2.2. The Source Of Funding Is: Nga, The National Expenditure Program 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manual And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Invitation To Bid By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Inspected The Site, Determined The General Characteristics Of The Contracted Works And The Conditions For This Project, Such As The Location And The Nature Of The Work; (b) Climatic Conditions; (c) Transportation Facilities; (c) Nature And Condition Of The Terrain, Geological Conditions At The Site Communication Facilities, Requirements, Location And Availability Of Construction Aggregates And Other Materials, Labor, Water, Electric Power And Access Roads; And (d) Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices The Procuring Entity, As Well As The Bidders And Contractors, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. The Bidder Must Have An Experience Of Having Completed A Single Largest Completed Contract (slcc) That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc Adjusted, If Necessary, By The Bidder To Current Prices Using The Psa’s Cpi, Except Under Conditions Provided For In Section 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184. A Contract Is Considered To Be “similar” To The Contract To Be Bid If It Has The Major Categories Of Work Stated In The Bds. 5.3. For Foreign-funded Procurement, The Procuring Entity And The Foreign Government/foreign Or International Financing Institution May Agree On Another Track Record Requirement, As Specified In The Bidding Document Prepared For This Purpose. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.2 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Associated Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Fifty Percent (50%) Of The Project. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 7.1. [if Procuring Entity Has Determined That Subcontracting Is Allowed During The Bidding, State:] The Bidder Must Submit Together With Its Bid The Documentary Requirements Of The Subcontractor(s) Complying With The Eligibility Criteria Stated In Itb Clause 5 In Accordance With Section 23.4 Of The 2016 Revised Irr Of Ra No. 9184 Pursuant To Section 23.1 Thereof. 7.2. [if Subcontracting Is Allowed During The Contract Implementation Stage, State:] The Supplier May Identify Its Subcontractor During The Contract Implementation Stage. Subcontractors Identified During The Bidding May Be Changed During The Implementation Of This Contract. Subcontractors Must Submit The Documentary Requirements Under Section 23.1 Of The 2016 Revised Irr Of Ra No. 9184 And Comply With The Eligibility Criteria Specified In Itb Clause 5 To The Implementing Or End-user Unit. 7.3. Subcontracting Of Any Portion Of The Project Does Not Relieve The Contractor Of Any Liability Or Obligation Under The Contract. The Supplier Will Be Responsible For The Acts, Defaults, And Negligence Of Any Subcontractor, Its Agents, Servants, Or Workmen As Fully As If These Were The Contractor’s Own Acts, Defaults, Or Negligence, Or Those Of Its Agents, Servants, Or Workmen. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address At Bac Conference Room Nbp Reservation Muntinlupa City And/or Through Videoconferencing/webcasting} As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Ix. Checklist Of Technical And Financial Documents. 10.2. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 10.3. A Valid Pcab License Is Required, And In Case Of Joint Ventures, A Valid Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project. Any Additional Type Of Contractor License Or Permit Shall Be Indicated In The Bds. 10.4. A List Of Contractor’s Key Personnel (e.g., Project Manager, Project Engineers, Materials Engineers, And Foremen) Assigned To The Contract To Be Bid, With Their Complete Qualification And Experience Data Shall Be Provided. These Key Personnel Must Meet The Required Minimum Years Of Experience Set In The Bds. 10.5. A List Of Contractor’s Major Equipment Units, Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership, Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be, Must Meet The Minimum Requirements For The Contract Set In The Bds. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Ix. Checklist Of Technical And Financial Documents. 11.2. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.3. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Alternative Bids Bidders Shall Submit Offers That Comply With The Requirements Of The Bidding Documents, Including The Basic Technical Design As Indicated In The Drawings And Specifications. Unless There Is A Value Engineering Clause In The Bds, Alternative Bids Shall Not Be Accepted. 13. Bid Prices All Bid Prices For The Given Scope Of Work In The Project As Awarded Shall Be Considered As Fixed Prices, And Therefore Not Subject To Price Escalation During Contract Implementation, Except Under Extraordinary Circumstances As Determined By The Neda And Approved By The Gppb Pursuant To The Revised Guidelines For Contract Price Escalation Guidelines. 14. Bid And Payment Currencies 14.1. Bid Prices May Be Quoted In The Local Currency Or Tradable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 14.2. Payment Of The Contract Price Shall Be Made In: A. Philippine Pesos. 15. Bid Security 15.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 15.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Calendar Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 16. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission To The Given Website Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 17. Deadline For Submission Of Bids The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 18. Opening And Preliminary Examination Of Bids 18.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 18.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, All Bids And Combinations Of Bids As Indicated In The Bds Shall Be Received By The Same Deadline And Opened And Evaluated Simultaneously So As To Determine The Bid Or Combination Of Bids Offering The Lowest Calculated Cost To The Procuring Entity. Bid Security As Required By Itb Clause 16 Shall Be Submitted For Each Contract (lot) Separately. 19.3. In All Cases, The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184 Must Be Sufficient For The Total Of The Abcs For All The Lots Participated In By The Prospective Bidder. 20. Post Qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps), And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Bid Data Sheet Itb Clause 5.2 For This Purpose, Contracts Similar To The Project Refer To Contracts Which Have The Same Major Categories Of Work, Which Shall Be: Architectural, Engineering Design, Detailed Engineering Requirements And Construction Of Building With Concreting Works. 7.1 Subcontracting Is Not Allowed 10.3 A Valid Pcab License Is Required, And In Case Of Joint Ventures, A Valid Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project. 10.4 The Key Personnel Must Meet The Required Minimum Years Of Experience Set Below: For Design Personnel: Key Personnel General Experience Relevant Experience Principal Architect The Principal Architect Must Be Duly-licensed With At Least Ten (10) Years’ Experience Experience In The Design Of Residential, Government Offices Or Institutional Facilities, And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. Structural Engineer The Structural Engineer Must Be A Duly-licensed Civil Engineer With At Least Ten (10) Years’ Experience. Experience In Structural Design And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. Professional Electrical Engineer The Electrical Engineer Must Be A Registered Professional Electrical Engineer With At Least Five (5) Years’ Experience. Experience In The Design Of Lighting, Power Distribution, Communication Systems (specifically Structured And Local Area Network Cabling, Pabx), Building Management Systems And Preferably Knowledgeable In Developments In Emergent Efficient Lighting Technologies And Energy Management. Professional Mechanical Engineer The Mechanical Engineer Must Be A Professional Mechanical Engineer With At Least Five (5) Years’ Experience. Experience In Hvac And Fire Protection Systems And Preferably Knowledgeable In Emergent, Alternative Energy- Efficient Hvac Technologies. Electronics And Communications Engineer The Electronics And Communications Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience. Experience In The Design Of Communications Systems, And Preferably Knowledgeable In The Application Of Building Automation And Surveillance Systems. Sanitary Engineer The Sanitary Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience. Experience In The Design Of Building Water Supply And Distribution, Plumbing, And Preferably Knowledgeable In Waste Water Management/treatment, And Emergent, Alternative Effluent Collection And Treatment System. The Design & Build Contractor May, As Needed And At Its Own Expense, Add Additional Professionals And/or Support Personnel For The Optimal Performance Of All Architectural And Engineering Design Services, As Stipulated In These Terms Of Reference, For The Project. Prospective Bidders Shall Attach Each Individual’s Resume And Prc License Of The (professional) Staff. Design Personnel May Also Be Utilized For The Construction Phase Provided That The Same Meet The Minimum Number Of Years Of Experience In The Construction Of Similar Projects. For Construction Personnel: Key Personnel General Experience Relevant Experience Project Manager The Project Manager Shall Be A Licensed Architect Or Engineer With At Least Eight (8) Years Relevant Experience. Relevant Experience On Similar And Comparable Projects In Different Locations. The Project Manager Should Have A Proven Record Or Managerial Capability Through The Directing/managing Of Major Civil Engineering Works, Including Projects Of A Similar Magnitude. Project Architect/engineer The Project Architect/engineer Shall Be A Licensed Architect Or Engineer With At Least Five (5) Years’ Experience. Experience In Similar And Comparable Projects And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. Materials Engineer (m.e. I) The Materials Engineer Must Be Duly Accredited With The Dpwh And With At Least Five (5) Years’ Experience. Experience In Similar And Comparable Projects And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. Electrical Engineer The Electrical Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience. Experience In Similar And Comparable Projects In The Installation Of Lighting, Power Distribution, Communication Systems (specifically Structured And Local Area Network Cabling, Pabx), Building Management Systems. Mechanical Engineer The Mechanical Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience. Experience In Similar And Comparable Projects In The Installation Of Hvac And Fire Protection. Sanitary Engineer The Sanitary Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience. Experience In Similar And Comparable Projects In The Installation Of Building Water Supply And Distribution, Plumbing. Foreman The Foreman Must Have At Least Five (5) Years’ Experience. Experience In Similar And Comparable Projects And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. Safety Officer The Sanitary Officer Must Have At Least Two (2) Years’ Experience. Must Be An Accredited Safety Practitioner By The Department Of Labor And Employment (dole) And Must Have Undergone The Prescribed Forty (40) Hour Construction Safety And Health Training (cosh) 10.5 The Minimum Major Equipment Requirements Are The Following: Equipment Capacity Number Of Units Backhoe At Least 38hp With 0.055 To 0.160 M3 Bucket Capacity 1 Pay Loader At Least 2.5 To 9.5 M3 Bucket Capacity 1 Dump Truck At Least 10 Cu.m. 2 Generator 50kva 1 Concrete Mixers 1 Bagger 4 Welding Machines 300amp Heavy Duty 4 Submersible Dredging Pump At Least 1hp And 2” Output 1 Prospective Bidders Shall Attach The List Of Contractor’s Major Equipment Units, Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership, Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be. 12 No Further Instructions. 15.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than 2% Of The Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; B. The Amount Of Not Less Than 5% Of The Abc, If Bid Security Is In Surety Bond. 19.2 No Further Instructions. 20 Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its; 1. Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) 2. Supporting Documents For The Slcc (notice Of Award And/or Notice To Proceed And Project Owner’s Certificate Of Final Acceptance Issued By The Owner Other Than The Contractor Or The Constructors Performance Evaluation System (cpes) Final Rating, Which Must Be At Least Satisfactory. In Case Of Contracts With The Private Sector, An Equivalent Document Shall Be Submitted) 3. Certified True Copy Coming From The Issuing Agency Of Valid And Current Registration Certificate (sec Certificate Of Registration For Corporation Or Dti Certificate Of Registration For Sole Proprietorship Or Cda Certificate Of Registration For Cooperative) 4. Valid And Current Mayor’s Or Business Permit 5. Valid And Current Tax Clearance 6. Valid And Current Pcab License And Registration 7. Audited Financial Statement 8. Three (3) Sets Photocopy Of Eligibility And Financial Envelope Duly Marked As “copy No.1”, “copy No.2” And “copy No.3” 21 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. 2. Sectional Completion Of Works If Sectional Completion Is Specified In The Special Conditions Of Contract (scc), References In The Conditions Of Contract To The Works, The Completion Date, And The Intended Completion Date Shall Apply To Any Section Of The Works (other Than References To The Completion Date And Intended Completion Date For The Whole Of The Works). 3. Possession Of Site 3.1 The Procuring Entity Shall Give Possession Of All Or Parts Of The Site To The Contractor Based On The Schedule Of Delivery Indicated In The Scc, Which Corresponds To The Execution Of The Works. If The Contractor Suffers Delay Or Incurs Cost From Failure On The Part Of The Procuring Entity To Give Possession In Accordance With The Terms Of This Clause, The Procuring Entity’s Representative Shall Give The Contractor A Contract Time Extension And Certify Such Sum As Fair To Cover The Cost Incurred, Which Sum Shall Be Paid By Procuring Entity. 3.2 If Possession Of A Portion Is Not Given By The Above Date, The Procuring Entity Will Be Deemed To Have Delayed The Start Of The Relevant Activities. The Resulting Adjustments In Contract Time To Address Such Delay May Be Addressed Through Contract Extension Provided Under Annex “e” Of The 2016 Revised Irr Of Ra No. 9184. 4. The Contractor’s Obligations The Contractor Shall Employ The Key Personnel Named In The Schedule Of Key Personnel Indicating Their Designation, In Accordance With Itb Clause 10.3 And Specified In The Bds, To Carry Out The Supervision Of The Works. The Procuring Entity Will Approve Any Proposed Replacement Of Key Personnel Only If Their Relevant Qualifications And Abilities Are Equal To Or Better Than Those Of The Personnel Listed In The Schedule. 5. Performance Security 5.1. Within Ten (10) Calendar Days From Receipt Of The Notice Of Award From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr. 5.2. The Contractor, By Entering Into The Contract With The Procuring Entity, Acknowledges The Right Of The Procuring Entity To Institute Action Pursuant To Ra No. 3688 Against Any Subcontractor Be They An Individual, Firm, Partnership, Corporation, Or Association Supplying The Contractor With Labor, Materials And/or Equipment For The Performance Of This Contract. 6. Site Investigation Reports The Contractor, In Preparing The Bid, Shall Rely On Any Site Investigation Reports Referred To In The Scc Supplemented By Any Information Obtained By The Contractor. 7. Warranty 7.1. In Case The Contractor Fails To Undertake The Repair Works Under Section 62.2.2 Of The 2016 Revised Irr, The Procuring Entity Shall Forfeit Its Performance Security, Subject Its Property (ies) To Attachment Or Garnishment Proceedings, And Perpetually Disqualify It From Participating In Any Public Bidding. All Payables Of The Gop In His Favor Shall Be Offset To Recover The Costs. 7.2. The Warranty Against Structural Defects/failures, Except That Occasioned-on Force Majeure, Shall Cover The Period From The Date Of Issuance Of The Certificate Of Final Acceptance By The Procuring Entity. Specific Duration Of The Warranty Is Found In The Scc. 8. Liability Of The Contractor Subject To Additional Provisions, If Any, Set Forth In The Scc, The Contractor’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Contractor Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. 9. Termination For Other Causes Contract Termination Shall Be Initiated In Case It Is Determined Prima Facie By The Procuring Entity That The Contractor Has Engaged, Before, Or During The Implementation Of The Contract, In Unlawful Deeds And Behaviors Relative To Contract Acquisition And Implementation, Such As, But Not Limited To Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices As Stated In Itb Clause 4. 10. Dayworks Subject To The Guidelines On Variation Order In Annex “e” Of The 2016 Revised Irr Of Ra No. 9184, And If Applicable As Indicated In The Scc, The Dayworks Rates In The Contractor’s Bid Shall Be Used For Small Additional Amounts Of Work Only When The Procuring Entity’s Representative Has Given Written Instructions In Advance For Additional Work To Be Paid For In That Way. 11. Program Of Work 11.1. The Contractor Shall Submit To The Procuring Entity’s Representative For Approval The Said Program Of Work Showing The General Methods, Arrangements, Order, And Timing For All The Activities In The Works. The Submissions Of The Program Of Work Are Indicated In The Scc. 11.2. The Contractor Shall Submit To The Procuring Entity’s Representative For Approval An Updated Program Of Work At Intervals No Longer Than The Period Stated In The Scc. If The Contractor Does Not Submit An Updated Program Of Work Within This Period, The Procuring Entity’s Representative May Withhold The Amount Stated In The Scc From The Next Payment Certificate And Continue To Withhold This Amount Until The Next Payment After The Date On Which The Overdue Program Of Work Has Been Submitted. 12. Instructions, Inspections And Audits The Contractor Shall Permit The Gop Or The Procuring Entity To Inspect The Contractor’s Accounts And Records Relating To The Performance Of The Contractor And To Have Them Audited By Auditors Of The Gop Or The Procuring Entity, As May Be Required. 13. Advance Payment The Procuring Entity Shall, Upon A Written Request Of The Contractor Which Shall Be Submitted As A Contract Document, Make An Advance Payment To The Contractor In An Amount Not Exceeding Fifteen Percent (15%) Of The Total Contract Price, To Be Made In Lump Sum, Or At The Most Two Installments According To A Schedule Specified In The Scc, Subject To The Requirements In Annex “e” Of The 2016 Revised Irr Of Ra No. 9184. 14. Progress Payments The Contractor May Submit A Request For Payment For Work Accomplished. Such Requests For Payment Shall Be Verified And Certified By The Procuring Entity’s Representative/project Engineer. Except As Otherwise Stipulated In The Scc, Materials And Equipment Delivered On The Site But Not Completely Put In Place Shall Not Be Included For Payment. 15. Operating And Maintenance Manuals 15.1. If Required, The Contractor Will Provide “as Built” Drawings And/or Operating And Maintenance Manuals As Specified In The Scc. 15.2. If The Contractor Does Not Provide The Drawings And/or Manuals By The Dates Stated Above, Or They Do Not Receive The Procuring Entity’s Representative’s Approval, The Procuring Entity’s Representative May Withhold The Amount Stated In The Scc From Payments Due To The Contractor. Section V. Special Conditions Of Contract Special Conditions Of Contract Gcc Clause 2 Sectional Completion Is Not Applicable The Intended Completion Date Is Three Hundred Sixty-five (365) Calendar Days From The Date Of Receipt Of The Ntp. 4.1 The Procuring Entity Shall Give Possession Of All Parts Of The Site To The Contractor From The Date Of The Receipt Of Notice To Proceed (ntp). 6 No Further Instructions. 7.2 Fifteen (15) Years. 10 No Dayworks Are Applicable To The Contract. 11.1 The Contractor Shall Submit The Program Of Work To The Procuring Entity’s Representative Within Fourteen (14) Calendar Days After The Issuance Of The Notice To Proceed (ntp) 11.2 The Amount To Be Withheld For Late Submission Of An Updated Program Of Work Is One Tenth Of One Percent Of The Total Contract Price. 13 The Amount Of The Advance Payment Is Fifteen Percent (15%) Of The Contract Price Upon Submission To And Acceptance By The Bureau Of Corrections Of An Irrevocable Standby Letter Of Credit Of Equivalent Value From A Commercial Bank, A Bank Guarantee Or A Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Licensed By The Insurance Commission And Confirmed By The Bureau Of Corrections. 14 The Contractor May Submit A Request For Payment For Work Accomplished. Such Requests For Payment Shall Be Verified And Certified By The Procuring Entity’s Representative/project Engineer. Materials And Equipment Delivered On The Site But Not Completely Put In Place Shall Not Be Included For Payment. 15.1 The Date By Which “as Built” Drawings Are Required Is Upon Actual Completion Of The Project. 15.2 The Amount To Be Withheld For Failing To Produce “as Built” Drawings And/or Operating And Maintenance Manuals By The Date Required Is Equivalent To Five Percent (5%) Of The Contract Price. Section Vi. Specifications Terms Of Reference Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) Sablayan Prison And Penal Farm, Occidental Mindoro 1. Project Information 1.1 Project Description The Mission Of The Bucor Is To Protect Society By Confining Offenders In The Controlled Environments Of Prisons And Community-based Facilities That Are Safe, Humane, Cost-efficient, And Appropriately Secure, And That Provide Self-improvement Opportunities To Assist Offenders In Becoming Law-abiding Citizens. The Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) Shall Be Conducive To The Reformation And Rehabilitation Of Inmates That Will Bring Them Back Into The Mainstream Of Society As Useful Citizens Of The Country. The Contract Will Involve The Design And Build Scheme Leading To The Construction Of The Bureau Of Corrections Super Maximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm, Sablayan, Occidental Mindoro. The Plans And Designs Shall Be In Accordance With The Plan Of The Said Structures As Conceptualized By The Bucor Planning And Design Division Or As Conceptualized By The Winning Bidder If The Latter Is Found To Be Superior (as Defined In Section 3.1.1 Of This Tor). Contractors Shall Be Required To Conduct A Bucor Led Site Inspection And Evaluation To Enable The Contractors To Develop Their Proposals Accordingly. The Bureau Of Corrections Shall Not Assume Any Responsibility Regarding Erroneous Interpretations Out Of Any Data Presented By The Contractor. The Bucor Super Maximum Prison Facility (phase 2) Shall Be Constructed As Per Approved Drawings, Specifications, Bill Of Materials, Scope Of Works And The General Contract Conditions Following The Guidelines As Per Annex G Of Irr Of Ra 9184. This Project Aims To Be Completed Within A Year, Aligning With Our Decongestion Program. This Expedited Timeline Underscores Our Commitment To Addressing Urgent Needs Within The Correctional System And Providing Timely Solutions For The High Risk Committed Pdl. The Plans And Designs Shall Be In Accordance With The Plan Of The Said Structures As Conceptualized By The Planning And Design Division (pdd) Under. Contractors Shall Be Required To Conduct A Bucor Led Site Inspection And Evaluation To Enable The Contractors To Develop Their Proposals Accordingly. The Bucor Shall Not Assume Any Responsibility Regarding Erroneous Interpretations Out Of Any Data Presented By The Contractor. The Construction Of Super Maximum-security Facility Shall Be Constructed As Per Approved Drawings, Specifications, Bill Of Materials, Scope Of Works And The General Contract Conditions Following The Guidelines As Per Annex G Of Irr Of Ra 9184. The Project Shall Have The Following Basic Components: A. Complete Detailed Architectural And Engineering Design Plans, Technical Specifications, And Design Calculations For The Construction Of The Project. Such Plans, Designs, And Technical Specifications Shall Be Subject For Review And Approval By The Bucor Pdd. The Design Development And The Contract Documents Phases Of The Design Shall Continue After The Bid Is Awarded. It Shall Likewise Be Subject For Review And Approval By The Director Of Directorate For Engineering Services (des). B. The Bid Shall Be Based On The Conceptual/schematic Design Drawings Prepared By The Bucor Pdd Or That Submitted By The Winning Bidder As Defined In Section 3.1.1 Of This Tor. C. The Contractor Shall Complete The Construction Of The Following Facility Component: I. One (1) Unit 2-storey“type B” Pdl Dormitory At Least 3190 Sq.m (gross Area) Polished Flooring And Sandwich Panel Roofing With The Capacity Of Atleast 340 Pdl, 2 Pdl Per Cell With Double Deck Bunk Bed (160 Cells), 1 Pdl Per Cell With Single Bed (20 Cells). The Dormitory To Include Complete Utilities, Power Supply, Cctv, Water Supply, Fire Protection; • Electrical System: Three-phase Power Line Supply, Connected From The Local Electric Utility (from Main Road/ Source To The Compound. The Power Line Shall Be Used For The Future Development Of The 50 Ha Facility. • Electrical System: Backup Power (three-phase Genset) Supply System With Capacity Not Less Than Total Computed Mva Load, Without Demand Factor (designed To Supply The Dormitory), And To Include Capacitor Bank, If Necessary; • Sewerage And Drainage Systems(pipelines To Cover From Project Site To Nearest Tapping Point); • Water Supply System With Sufficient Pressure To Provide The Water Requirement Of The Psdl. The System Is Oncomposed Of A Cistern Tank, Pumps, And An Overhead Water Storage Tank. Deep Well Source Water System (intake Box, Transmission Pipelines, Pressure Break Tanks, Chlorinator With Tanks And Accessories, Etc.) Whichever Is Deemed Most Suitable For The Facility And Is Authorized By The Lgu. • Fire Protection System (fire & Jockey Pump, Pump House), Fire Detection Alarm System And Fire Suppression Equipment Included In Dormitory. • Cctv Systems: To Install Cctv At Perimeter Fence To Monitor The Inside Compound And Dormitory To Monitor The Hallways And Blind Spots. Ii. 3 Meters Height Concrete Perimeter Security Fence With Concertina Above, To Cover 50 Hectares Area (plastered And Painted Finish); Iii. Primary And Secondary Fence For 1.8 Hectares Compound Including Gates, Catwalk And Post Towers (with Cr And Water Supply) (r.a. 10575 Rule 7). • 4 Meters Height Concrete Primary Perimeter Fence (with Catwalks, Concertina Wirings, Post Tower (with Cr And Water Supply) And Solar Lightings, (ra10575). • Secondary Perimeter Fence (3 Layer Concertina, Steel Mesh) With 300w Integrated Solar Light Every 3 Bays And (to Include Post Towers And Gates); Iv. Road Networks And Culverts • All Entry And Exit Point Of Any Bodies Of Water E.g. Creeks, Canals Shall Be Fenced Culvert By Metal Grills (non-corrosive); • The Project Has An Allocated Budget Sufficient To Cover At Least 1440 Sqm Of Road Construction Within The Prison Facility. While This Budget Allows For Road Development, Prioritization Shall Be Given To The Construction Of Culverts, Both Fenced And Road Culverts, To Ensure Adequate Drainage And Prevent Flooding. These Culverts Are Critical For The Road Leading From The Main Road To The Site, As Well As Along The Perimeter Of The Facility. To Accurately Assess The Project Scope And Design, Bidders Are Required To Conduct A Thorough Site Inspection To Identify And Evaluate All Necessary Culverts." 1.2 Contractual Framework The Contractual Arrangement To Be Used For The Project Is The Design-and-build (db) Scheme. Under This Scheme The Procuring Entity Awards A Single Contract For The Architectural/engineering Design And Construction To A Single Firm, Partnership, Corporation, Joint Venture Or Consortium. The Winning Contractor Shall Consult And Collaborate With The Bucor Pdd For The Preparation Of The Detailed Architectural Design Of The Project. The Detailed Architectural And Engineering Design Shall Be Subject For The Review And Approval By The Bucor Pdd. Contractors Shall Be Required To Conduct A Bucor Led Site Inspection And Evaluation To Enable The Contractors To Develop Their Proposals Accordingly. The Bucor Shall Not Assume Any Responsibility Regarding Erroneous Interpretations Out Of Any Data Presented By The Contractor. The Obligations And Liabilities Of The Contractor And Its Architect Shall Be Joint And Solidary For Purposes Of The Detailed Architectural Design Of The Project In Accordance With Article 1723 Of The Civil Code Of The Philippines And Other Pertinent Laws. The Db Scheme Of Procurement Was Recommended, Endorsed, And Adopted Pursuant To The Annex G Of Irr Of Ra 9184. 2. Scope Of Contract 2.1 Obligations Of The Winning Bidder/contractor A. Render Architectural And Allied Engineering Design Services Including Final Schematic Design Necessary For The Implementation Of The Project. The Allied Engineering Design Services Shall Include, But Shall Not Be Limited To, Design For Architectural, Civil, Structural, Electrical, Mechanical, Plumbing, And Electromechanical. All Drawings Shall Be Generated Using Modern Modeling/drafting Software And Printed On High Quality 20” X 30” Blue Print Paper. B. Undertake Detailed Architectural And Engineering Designs (daeds) Using The Given Data Such As Topographic, Hydrographic And Cross–section Surveys, Geotechnical And Geological Investigation, And Hydrologic Investigation And Initial Schematic Design Or Design Concept Provided By The Bucor Pdd Which Conforms With The Minimum Performance Specifications And Standards (mpss); C. If Applicable, Secure Environmental Clearance Or An “environmental Compliance Certificate (ecc)”. If The Proposed Project Is Considered Outside The Purview Of The Philippine Environmental Impact Statement (eis) System, A Certificate Of Non- Coverage Or Certificate Of Exemption Shall Be Secured. D. The Project Shall Be Constructed According To The Daeds Prepared By The Winning Bidder And Approved By The Bucor And In Compliance With The Mpss As Well As Provided In Rule Vii, Section 7 Of The Irr Of Ra 10575. Likewise, Construction Includes Conformance To The Provisions Pertaining To Buildings Under The Latest Edition Of The Dpwh Standard Specifications For Public Works Structures, Volumes Ii And Iii (blue Book). The Blue Book Prescribes, Among Other Things, The Material Requirements And Construction Requirements For Different Items Of Work, Including The Tests To Be Conducted During Construction By The Dpwh-accredited Testing Laboratory. The Blue Book Incorporates Pertinent Provisions Of The American Society For Testing And Materials (astm) And American Concrete Institute (aci), Among Other Standards, Pertaining To Construction. Attention Shall Be Given To The Relevant Items Of Work In The Following Parts Of The Blue Book: Volume Ii ➢ Part A – Facilities For The Engineer ➢ Part B – Other General Requirements Volume Iii ➢ Part A – Earthwork ➢ Part B – Plain And Reinforced Concrete Works ➢ Part C – Finishing ➢ Part D – Electrical ➢ Part E – Mechanical ➢ Part I – Water Supply ➢ Part J – Flood Control And Drainage ➢ Part I-c – Drainage Works For Materials And Technologies Not Covered By The Blue Book, Or If The Proponent Intends To Use Any New Material/technology Which Is Not Accredited By The Dpwh Bureau Of Research And Standards (brs), The Proponent Shall Submit A Certification From A Recognized Foreign Or International Institution To The Effect That The New Materials Or Technology Meets The Mpss For This Project And Has Been Successfully Used In Existing Structures With Proven Integrity. The Winning Bidder Or Contractor Shall Be Held Liable For Design And Structural Defects And/or Failure Of The Completed Project Within The Warranty Period Specified In Section 62.2 Of The Irr Of Ra 9184; And, F. The Winning Bidder Or Contractor Shall Be Solely Responsible For The Design And Shall Be Held Responsible For Any Default Resulted From Improper Design. Further, Extended Liability Of The Contractor Since It Stipulated That The Works, When Completed, Shall Be Fit For The Purpose For Which It Was Intended As Defined In The Contract. 2.2 Obligations Of The Bucor A. Provide Full Information On All Requirements For The Project; B. Approve The Winning Bidder Or Contractor’s Design Without Diminishing Their Full And Sole Responsibility For The Quality And Integrity Thereof; C. Give Prompt Written Notice Thereof To Winning Bidder Or Contractor, If It Observes Or Becomes Aware Of Any Defect In The Project; D. Designate, When Necessary, Representatives Authorized To Act On Its Behalf. It Shall Examine Documents Submitted By The Winning Bidder Or Contractor And Render Decisions Pertaining Thereto Promptly, To Avoid Unreasonable Delay In The Progress Of Their Work. It Shall Observe The Procedure Of Issuing Orders To The Winning Bidder Or Contractor; E. Supervise And Monitor The Implementation Of The Project; I. Construction Monitoring And Testing Forms: • The Use Of Construction Monitoring And Testing Forms That Will Be Provide By The Bucor - Nhq Pdd Is Mandatory Throughout The Duration Of Construction. • Oversight Of These Forms Will Be Conducted By The Engineering Services (es) Of The Sppf On Behalf Of The Bucor Pdd • Sppf-es To Impose To Contractor Testing Of All Items After Installation And/or Application. Es To Send Pdd Copy Of The Test Report/s. • Sppf-es To Monitor Material Delivery Of Contractor To Ensure All Materials Installed And/or Applied Are In Accordance With The Specifications Stated On Plans And Contract Of This Project. • In Case There Would Be Substitute Or Alternative To The Original Specification Of Material/s, Sppf- Es To Inform Pdd Of Such Variation. Ii. Bucor Engineer Visits: • Nhq Engineers And Architects (personnel Of Pdd) Will Conduct Site Visits On A Quarterly Basis Or Whenever Deemed Necessary To Ensure Compliance With Standards And Regulations. • Pdd Personnel To Witness The Final Testing And Commissioning Of The Systems, Equipment And Utilities Prior To Acceptance Of The Project Or Part Of The Project Thereof. Iii. Progress Billing Payment: • Sppf Es Engineers Will Provide Monthly Updates, Or As Deemed Necessary, On The Statement Of Work Accomplishment Based On The Actual Progress Of The Project, Including Reports Update. F. Pay The Accomplishment Accepted In The Conformance With The Mpss Included Under The Design And Build Contract. I. This Reports And Swa Updates Of The Ippf Es Will Be Reviewed And Approved By Pdd - Nhq Prior To Any Progress Billing Payments Being Made. 2.3 Bidding Documents The Bidding Documents For The Project Shall Govern The Conduct Of The Procurement Of The Project. 3. Scope Of Works 3.1 Planning And Design Phase 3.1.1 Preliminary Architectural Plan (pap) By Bidder The Approved Concept Design Shall Adopt The Provisions Indicated In Rule Vii, Section 7 Of The Irr Of Ra 10575. Bidders Shall Submit Also An Alternative Design Concept With Respect To The Actual Site Condition. This Alternative Design By The Winning Bidder Shall Be Adopted Should The Same Be Found To Be Superior Than The One Conceptualized By The Bucor Pdd. 3.1.2 Detailed Architectural And Engineering Design (daed) By The Winning Bidder During The Implementation Of The Project, The Winning Bidder Shall Prepare The Daed Of The Project And Submit The Same To The Bucor For Approval Prior To The Execution Of The Construction Works. The Winning Bidder Shall Prepare The Daed Based On Its Pap As Reviewed And Accepted By The Bucor Pdd And In Accordance With The Minimum Performance Standards And Specifications (mpss). The Daed Shall Be Undertaken With A Degree Of Accuracy That Will Allow Estimates To Be Made Within Approximately Plus Or Minus Five Percent (+/-5%) Of The Final Quantities. Once Approved By The Bucor, The Winning Bidder’s Daed Shall Form Part Of The Mpss. The Bucor-approved Daed, Together With The Mpss Provisions On Construction Under Section 2.0 Hereof, Shall Govern The Actual Construction Undertaken By The Winning Bidder. The Winning Bidder Shall Undertake The Necessary Field Surveys And Investigation In Accordance With The Dpwh Design Guidelines. In Carrying Out These Works, The Winning Bidder Shall Ensure That The Engineering, Environmental, Particularly During Field Investigations And The Development Of The Preliminary And Final Detailed Engineering Designs. The Winning Bidder Shall Ensure That All Designs Submitted For Approval Have Fully Taken Into Account Key Findings From The Engineering, Environmental, And That Negative Environmental Impacts Have Been Minimized Or Eliminated To The Fullest Extent Possible. 3.1.3 Architectural And Engineering Design Submittals I. Architectural Design A. The Building Should Be Designed With Structural, Electrical, Natural Or Combine Ventilation And Natural Lighting Following Building Design Standards. B. The Prospective Bidder Shall Prepare The Preliminary Architectural Plans In Accordance With The Requirements Of The National Building Code Of The Philippines, Accessibility Law (bp 344) Including All Other Applicable Laws And Local Ordinances. Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. Site Development Plan 2. Vicinity Map 3. Perspective 4. Floor Plans 5. Elevations A. Front Elevation B. Rear Elevation C. Right Elevation D. Left Elevation 6. Sections A. Longitudinal Section B. Cross Section 7. Doors & Window Schedule 8. Plans And Details Of Stairs And Ramps 9. Schedule Of Finishes For Floors, Walls And Ceiling 10. Miscellaneous Details Ii. Structural Design A. The Proponent Shall Prepare The Necessary Structural Analysis/calculation And Design Of The Structural Members Of The Building Component In Accordance With The National Building Code Of The Philippines With Its Referral Codes Such As The Latest National Structural Code Of The Philippines. The Design For The Structure Shall Take Into Account, Among Other Things, The Seismic Requirements Of The Area To Determine The Optimum Safety Of The Whole Structure And To Minimize Possible Earthquake Damage. B. On The Basis Of The Data Obtained From The Detailed Site Investigations, Topographical/soil And Survey, Geotechnical Engineering, Foundation Investigation, Material Testing, Survey Of Existing Site Conditions, The Seismic Requirements Of The Area, The Load Requirements Of The Building And Other Investigation Required To Obtain The Data Necessary To Ensure The Safety Of The Structure, The Proposal Shall Prepare The Preliminary Structural Design Plans Of The Structure. Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. Structural Design Criteria And Design Notes 2. Foundation Plan 3. Floor Framing Plans 4. Schedule Of Slab, Beams And Girders 5. Schedule Of Columns 6. Schedule Of Footings 7. Structural Details Of Stairs/ramp, If Applicable 8. Roof Framing Plan, If Applicable 9. Schedule And Details Of Trusses, If Applicable 10. Road Design And Details (if Applicable) 11. Miscellaneous Details Iii. Sanitary/plumbing Design A. General • The Detailed Design Shall Conform To The General Standards Adopted By The Sanitary & Plumbing Code Of The Philippines And Other Pertinent Laws And Ordinances. • All Design Considerations/assumptions Shall Be Based On The Results Of The Technical Studies, Detailed Analyses, And Design Computations. • The Technical Drawings And Specifications Shall Clearly Indicate All The Details Required To Ascertain The Care And Thoroughness Devoted In The Preparation Of The Drawings. B. Drainage And Sewerage • The Drainage Layout Shall Show All The Required Information Such As Direction Of Flow, Manhole-to-manhole Distances, And Sizes Of Lines, Manholes/canals, Location Of Outfalls, Etc. • The Prospective Bidder Shall Prepare A Design For The Sewage Treatment Plant In Accordance To The Clean Water Act Of 2004 (republic Act No. 9275) And Other Relevant Laws And Ordinances. Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. General Notes 2. Legend & Symbols 3. Sewer, Vent And Storm Drainage Layout 4. Enlarged Toilet Plan For Common And Pwd Toilets 5. Isometric Diagram 6. Miscellaneous Details 7. Drainage And Sewerage System 8. Three Chamber Septic Tank Plans And Details C. Water Supply And Distribution System • The Proponent Shall Carry Out A Preliminary Detailed Design For The Water Supply Of The Project. The Design Should Be On The Basis Of The Source And Volume Of Water Supply, Water Consumption, Piping Network, And Conveyance In Accordance With The Applicable Laws, Rules And Regulations Governing Health, Safety And Sanitation. • The Contractor Shall Install Elevated Water Storage/s Per Unit Located At The Roof Deck Of The Prison Dormitories. (sufficient Capacity To Supply The Pdl) Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. General Notes 2. Legend & Symbols 3. Water Line Layout 4. Water Line Isometric Diagram 5. Water Reservoir Plans And Details 6. Miscellaneous Details Iv. Electromechanical Design A. Sewage Treatment Plant • The Prospective Bidder Shall Prepare A Design For The Sewage Treatment Plant In Accordance To The Clean Water Act Of 2004 (republic Act No. 9275) And Other Relevant Laws And Ordinances. Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. General Notes 2. Legend & Symbols 3. Electrical System Layout 4. Mechanical System Layout 5. Instrumentation And Control System Diagrams 6. Piping And Instrumentation Diagrams (p&ids) 7. Equipment Details And Specifications 8. Electrical Power Distribution 9. Emergency Power Systems 10. Grounding And Lightning Protection 11. Control And Monitoring Systems, If Applicable 12. Safety Systems 13. Miscellaneous Details B. Fire Protection System • The Prospective Bidder Shall Prepare A Design For The Fire Protection System In Accordance To The Fire Code Of The Philippines, (irr) Of Ra 9514, And Other Relevant Laws And Ordinances. Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. Sprinkler System 2. Sprinkler System Isometric Diagram 3. Fire Fighting Piping System Diagram 4. Fire Alarm System Layout 5. Fire Suppression System Layout 6. Smoke Management System Layout 7. Fire Pump And Water Supply 8. Miscellaneous Details V. Electrical Design A. The Prospective Bidder Shall Prepare A Preliminary Design Plan For The Electrical And Power Supply System Of The Building In Accordance With The Electrical Code Of The Philippines, Fire Code Of The Philippines, National Building Code Of The Philippines And Other Relevant Laws And Ordinances. B. The Prospective Bidder Shall Prepare A Design For The Electrical And Power Supply System Considering Ease Of Maintenance And Prevention Of Illegal Connections Including Electrical Supply For Ceiling Fans. C. The Prospective Bidder Shall Prepare A Design For Backup Power Generator With Capacity Not Less Than Total Computed Kva Load Without Demand Factor. D. 3-phase Electrical Supply Shall Be Sourced From The Local Electrical Utility. E. Power Line Connection From Main Source To The Facility Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. Power Riser Diagram 2. Power Layout System 3. Lighting Layout System 4. Local Area Network System, If Applicable 5. Grounding System 6. Load Schedules 7. Others As Applicable Vi. Other Requirements  Technical Specifications  Boring Test  Structural Design And Analysis And Computation  Final Design And Construction Plans  Upon Award Of Contract, The Contractor Shall Comply The Following: O Prepare Final Draft Of Architectural And Engineering Design Plans Incorporating All Design Refinements And Revisions Based On Project Requirement Or As May Be Required By The Bucor Pdd Within The Scope Of Design. O Submit To The Bucor Design And Build Committee (bucor-dbc) The Final Architectural And Engineering Design Plans And Specifications Duly Signed And Sealed By The Concerned Professional Architect, Engineers, Incorporating All The Necessary Revisions And Refinements For Approval By The Head Of Procuring Entity. 3.2 Construction Phase The Following Works Shall Comprise This Phase: I. Permits And Clearances, The Contractor Shall Upon Authorization Of The Head Of The Procuring Entity (hope), Make Representations With The Government Agencies Concerned To Expedite The Processing Of The Necessary Permits And Certificates Such As The Following: A. Zoning Certification And Locational Clearance B. Building /electrical/sanitary Permits C. Certificate Of Occupancy D. Environmental Clearance Certificate E. All Other Permits/clearances As May Be Required For The Construction. Ii. Mobilization, The Contractor Shall Mobilize All The Required Project Team Personnel, Equipment, Tools, And Manpower With The Required Skills And In Sufficient Number As May Be Necessary For His Efficient Undertaking Of The Project. Iii. Clearing, Grubbing And Hauling/disposal Of Debris Iv. Construction Stage As A Rule, Contract Implementation Guidelines For Procurement Of Infrastructure Projects Shall Comply With Annex “e” Of The Revised Irr Of Ra 9184. The Following Provisions Shall Supplement These Procedures: I. No Works Shall Commence Unless The Contractor Has Submitted The Prescribed Documentary Requirements And Implementing Unit Has Given Written Approval. Work Execution Shall Be In Accordance With Reviewed And Approved Documents. Ii. The Contractor Shall Be Responsible For Obtaining All Necessary Information As To Risks, Contingencies And Other Circumstances Which May Affect The Works And Shall Prepare And Submit All Necessary Documents Specified By The Implementing Unit To Meet All Regulatory Approvals As Specified In The Contract Documents. Iii. The Contractor Shall Submit A Detailed Program Of Works Within Fourteen (14) Calendar Days After The Issuance Of The Notice To Proceed (ntp) For Approval By The Head Of The Procuring Entity (hope) That Shall Include, Among Others: A. The Order In Which It Tends To Carry Out The Work Including Anticipated Timing For Each Stage Or Design/detailed Engineering And Construction; B. Periods For Review Of Specific Outputs And Any Other Submissions And Approvals; C. Sequence Of Timing For Inspection And Tests; D. General Description Of The Design And Construction Methods To Be Adopted; E. Number Of Personnel To Be Assigned For Each Stage Of The Work; F. List Of Equipment Required On Site For Each Stage Of The Work; And G. Description Of The Quality Control System To Be Utilized For The Project. Iv. Any Errors, Omissions, Inconsistencies, Inadequate Or Failure Submitted By The Contractor That Do Not Comply With The Requirements Shall Be Rectified, Resubmitted And Reviewed At The Contractor’s Cost. If The Contractor Wishes To Modify Any Design Or Document Which Has Been Previously Submitted, Reviewed And Approved, The Contractor Shall Notify The Implementing Unit Within A Reasonable Period Of Time And Shall Shoulder The Cost Of Such Changes. V. As A Rule, Changes In Design And Construction Requirements Shall Be Limited Only To Those That Have Not Been Anticipated In The Contract Signing And Approval. The Following Guidelines Shall Govern Approval For Change Or Variation Order: A. Change Orders Resulting From Design Errors, Omissions Or Non-conformance With The Performance Specifications And Parameters And The Contract Documents By The Contractor Shall Be Implemented By The Contractor At No Additional Cost To The Bureau Of Corrections. B. Provided That The Contractor Suffers Delay And/or Incurs Costs Due To Changes Or Errors In The Preparation Of Performance Specification And Parameters, The Contractor Shall Be Entitled To Either One Of The Following:  An Extension Of Time For Any Such Delays Under Section 10 Of Annex “e” Of Irr-a (ra9184; Or  Payments For Such Cost As Specified In The Contract Documents, Provided That The Cumulative Amount Of The Variation Order Does Not Exceed Ten Percent (10%) Of The Original Project Cost. C. The Contract Documents Shall Include The Manner And Schedule Of Payment Specifying The Estimated Contract Amount And Installments In Which The Contract Will Be Paid. D. The Contractor Shall Be Entitled To Advance Payment Subject To The Provisions Of Section 4 Of Annex “e” Of The Revised Irr Of Ra 9184. E. The Implementing Unit Shall Monitor The Quality Control Procedures For The Design And Construction In Accordance With The Government Guidelines And Shall Issue The Proper Certificates Of Acceptance For Sections Of The Works Or Whole Of The Works As Provided For In The Contract Documents. F. The Contractor Shall Provide All Necessary Equipment, Personnel, Instruments, Documents And Others To Carry Out Specified Tests. G. This Design And Build Project Shall Have Minimum Defects Liability Period Of One (1) Year Contract Completion Or As Provided In The Contract Documents. This Is Without Prejudice To The Liabilities Imposed Upon The Engineer/architect Who Drew Up The Plans And Specification For A Building Sanctioned Under Section 1723 Of The New Civil Code Of The Philippines. H. The Contractor Shall Be Held Liable For Design And Structural Defects And/or Failure Of The Completed Project Within The Warranty Period Of 15 Years For Permanent Structures/buildings And 5 Years For Roads As Specified In Section 62.2.2 Of The Revised Irr Of Ra 9184 V. As-built Plans. The Contractor Shall Cause The Preparation And Submission Of As-built Plans Duly Signed And Sealed By All Concerned Parties Involved In The Construction In The Same Sheet Size And Scale As The Original Drawings In One (1) Blue Print Copy And One (1) Reproducible Copy. Vi. General Requirements: 1. Temporary Facilities Such As Field Offices For The Bucor Inspectorate Team, Project Engineers And Quarters For Laborers; Temporary Warehouse For The Construction Material. 2. Office Furniture And Equipment, Survey Equipment And Consumables 3. Photographs: This Item Consists Of The Supply Of Equipment And Materials, I.e., Album, Necessary To Undertake Photographic Progress Activities Of The Project And Of All Cost Incidental To The Preparation And Submission Of Photographs (at Least 12 Photographs Per Day). The Quantities For Photographs Shall Be One (1) Set Of Photographs Per Month. 4. Health And Safety Program Including Personal Protective Equipment (ppe) A. All Standard Safety Measures And Precautions Shall Be Exercised By The Contractor In The Course Of The Project For The Protection Of The Public And Its Workers And In Conformity With Dole Department Order No. 13, Series Of 1998. B. All Workers Shall Be Equipped With Proper Working Uniform And Identification At All Times. They Must Be Registered With The Governing Bucor Security Office And Must Comply With The Bucor’s Rules And Regulations. C. The Contractor Shall Secure His/her Own Equipment And Materials On Site. The Bucor Shall Not Be Liable To Any Losses Incurred During The Progress Of The Work. 5. Minimum Heavy Equipment Requirement (as Needed) For Site Development Such As: No. Item Specification 1. Backhoe 0.8 Cu. M. 2. Backhoe Wheel Mounted With Breaker 0.90 Cu. M. 3. Cargo/service Truck 2-5 Mt., 160 Hp 4. Dump Truck 12 Cu. Yd. 5. Motorized Road Grader G710a, 140hp 6. Payloader 1.5 Cu. M. 7. Vibrator Roller 10 Mt 8. Bulldozer 170 Hp 9. Scraper 515 Hp 10. Truck Mounted Crane, Hydraulic Telescopic Bommer Capacity: 41 – 45 Mt. 11. Crawler Crane 41-45 Mt 12. Generator Set 300 Kw/375 Kva 13. Water Pump 100mm Suction Dia. 14. One Bagger Mixer 4-6 Ft3/min 15. Concrete Vibrator Ey20, 5hp, 32-70mm 16. Vibro Hammer 45000 Kg-m 17. Excavator 17.5 Kw Or Any Specify Types Of Heavy Equipment Needed For A Site Development Will Be Determined By The Winning Bidder. 6. Environmental Compliance 7. Communication Equipment: This Item Consists Of The Provision Of Communication Equipment. 8. Billboard 9. Traffic Management (if Applicable). Vii. Building Construction 1 Lot One (1) Unit 2-storey“type B” Pdl Dormitory At Least 3190 Sq.m (gross Area) Polished Flooring And Sandwich Panel Roofing With The Capacity Of Atleast 340 Pdl, 2 Pdl Per Cell With Double Deck Bunk Bed (160 Cells), 1 Pdl Per Cell With Single Bed (20 Cells). The Dormitory To Include Complete Utilities, Power Supply, Cctv, Water Supply, Fire Protection; • Electrical System: Three-phase Power Line Supply, Connected From The Local Electric Utility (from Main Road/ Source To The Compound. The Power Line Shall Be Used For The Future Development Of The 50 Ha Facility. • Electrical System: Backup Power (three-phase Genset) Supply System With Capacity Not Less Than Total Computed Mva Load, Without Demand Factor (designed To Supply The Dormitory), And To Include Capacitor Bank, If Necessary; • Sewerage And Drainage Systems(pipelines To Cover From Project Site To Nearest Tapping Point); • Water Supply System With Sufficient Pressure To Provide The Water Requirement Of The Psdl. The System Is Composed Of A Cistern Tank, Pumps, And An Overhead Water Storage Tank. Deep Well Source Water System (intake Box, Transmission Pipelines, Pressure Break Tanks, Chlorinator With Tanks And Accessories, Etc.) Whichever Is Deemed Most Suitable For The Facility And Is Authorized By The Lgu. • Fire Protection System (fire & Jockey Pump, Pump House), Fire Detection Alarm System And Fire Suppression Equipment Included In Dormitory. • Cctv Systems: To Install Cctv At Perimeter Fence To Monitor The Inside Compound And Dormitory To Monitor The Hallways And Blind Spots. 1 Lot 3 Meters Height Concrete Perimeter Security Fence With Concertina Above, To Cover 50 Hectares Area (plastered And Painted Finish); 1 Lot Primary And Secondary Fence For 1.8 Hectares Compound Including Gates, Catwalk And Post Towers (with Cr And Water Supply) (r.a. 10575 Rule 7). • 4 Meters Height Concrete Primary Perimeter Fence (with Catwalks, Concertina Wirings, Post Tower (with Cr And Water Supply) And Solar Lightings, (ra10575). • Secondary Perimeter Fence (3 Layer Concertina, Steel Mesh) With 300w Integrated Solar Light Every 3 Bays And (to Include Post Towers And Gates); 1 Lot Road Networks And Culverts • The Project Has An Allocated Budget Sufficient To Cover At Least 1440 Sqm Of Road Construction Within The Prison Facility. While This Budget Allows For Road Development, Prioritization Shall Be Given To The Construction Of Culverts, Both Fenced And Road Culverts, To Ensure Adequate Drainage And Prevent Flooding. These Culverts Are Critical For The Road Leading From The Main Road To The Site, As Well As Along The Perimeter Of The Facility. • All Entry And Exit Point Of Any Bodies Of Water E.g. Creeks, Canals Shall Be Fenced Culvert By Metal Grills (non-corrosive); • To Accurately Assess The Project Scope And Design, Bidders Are Required To Conduct A Thorough Site Inspection To Identify And Evaluate All Necessary Culverts. A. Material Specifications: A. Floor Finishes • Polished Cement Finish Prison Cell, Hallways, Staircases, And Rooms • Plain Cement Finished - Pathways. • Ramps - Anti Slip Pavers Or Tiles • Crs – Unglazed Ceramic Tiles B. Wall Finishes A. Glazed Wall Tiles - 1.8m Height. B. Plain Cement Plaster Finish - For All Buildings And Facilities C. Ceiling Finishes C. Concrete Steel Decking, If Applicable. – Coated In White Enamel D. Painting D. Semi-gloss Solvent Paint Top Coat (high-end Quality) For Interior And Exterior Walls In Two To Three Coats Application. Apply Concrete Neutralizer For Newly Finished Concrete Surfaces. Use Solvent Primer. E. Varnish Paint Finish With Weather Proof Coating – For Doors And Jambs Branded, High-end Quality (offices, Etc.), All Wooden Doors Must Have Secondary Steel Doors. F. Use Epoxy Paint Primer. Epoxy Paint Finish – For Structural Steel And All Metal Works E. Doors And Windows G. No Doors For Prison Facility Comfort Rooms With 1.20 Meter Finish Wall Height (see Rule Vii, Section 7 R-irr Of Ra 10575). H. Steel Doors And Grills – For Dormitories, Gates And Other Security Areas. Sliding Doors For All Cells (see Rule Vii, Section 7 R-irr Of Ra 10575) F. Waterproofing I. Uv Resistant Polyurethane Waterproofing – For All Roof Deck With Topping Works Provided With Welded Wire Mesh. (at Elevated Water Tank Area) J. Cistern - Polyurethane Waterproofing G. Plumbing Works K. Upvc Pipe Series 1000 – For All Soil, Sewer, Waste, Dry And Wet Vent Piping High-end Quality L. Pprc Fusion Type – For All Water Lines High-end Quality M. Contractor Encouraged To Adapt: Lpf Flush Valve For Water Closet Or Stainless Toilet-lavatory Combination. Waterless Urinals N. Sprinkler System To All Prison Dormitories In Accordance With The Provisions Of Revised Plumbing Code Of The Philippines. O. Contractor To Provide A Water System To Supply The Facility 4. Approved Budget For The Contract (abc) The Approved Budget For The Contract (abc) Is Php 300,000,000. This Is The Ceiling For Acceptable Bids. Bids Higher Than Abc Shall Be Automatically Rejected. 5. Proposed Implementation Schedule (example): No. Of Months 1 2 4 5 6 7 8 9 10 11 12 Design Phase Construction Phase 6. Eligibility Criteria For Bidders 6.1 General The Eligibility Requirements For This Design And Build Project Shall Adopt The Provisions Of Annex “g” Of The Implementing Rules And Regulations Of Ra 9184 (e.g. Eligibility Requirement). However, If A Bidder Who Has No Experience In Db Project On Its Own May Opt To Enter A Subcontracting Agreement, Partnership, Or Joint Venture With A Design Or Engineering Firm For The Design Portion Of The Project. 6.2 Legal Requirements A. Valid Contractor’s License Issued By The Philippine Contractor’s Accreditation Board B. Valid License Of The Contractor’s Designer Issued By The Professional Regulation Commission. 6.3 Technical Requirements A. The Contractor’s Designer Must Have Designed One Structure Similar To The Project At Hand With A Construction Cost Of At Least 50 % Of The Abc. 6.4 Financial Requirements The Contractor Must Have A Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc To Be Bid Or Equivalent To Php300,000,000.00. 7. Contents Of The Bid 7.1 In The First Envelope Class “a” Documents Legal Documents I. Philgeps Certificate Of Registration And Membership In Accordance With Section 8.5.2 Of This Irr. For Procurement To Be Performed Overseas, It Shall Be Subject To The Guidelines To Be Issued By The Gppb. (a) Ii. Pcab License And Registration, In Case Of Jv; 57 Iii. Statement Of All Ongoing Government And Private Contracts; Iv. Statement Of Slcc; V. Nfcc Computation; Vi. Jva, If Applicable; Vii. Bid Security In The Prescribed Form, Amount And Validity Period; Viii. Project Requirements, Which Shall Include The Following: 1. Organizational Chart For The Contract To Be Bid; 2. List Of Contractor’s Personnel (design And Construction), To Be Assigned To The Contract To Be Bid, With Their Complete Qualification And Experience Data; 3. List Of Contractor’s Equipment Units Which Are Owned, Leased And/or Under Purchase Agreements, Supported By Certification Of Availability Of Equipment From Lessor/vendor For The Duration Of The Project. Ix. Omnibus Sworn Statement By The Prospective Bidder Or Its Authorized Representative In The Prescribed Format; X. Submission Of Preliminary Conceptual Design Plans: Class “b” Documents I. For Infrastructure Projects, Jv Bidders Shall Submit A Jva In Accordance With R.a. 4566 And It’s Irr. Ii. Each Partner Of The Joint Venture Shall Submit Their Philgeps Certificates Of Registration In Accordance With Section 8.5.2 Of This Irr. The Submission Of Technical And Financial Eligibility Documents By Any Of The Joint Venture Partners Constitutes Compliance: Provided, That The Partner Responsible To Submit The Nfcc Shall Likewise Submit The Statement Of All Of Its Ongoing Contracts And Audited Financial Statements. 1. Preliminary Conceptual Architectural Design Plans In Accordance With The Degree Of Details Specified By The Procuring Entity: (at Suitable Scale On High Quality A3 Blue Print Paper /digital Print Minimum Size) A. Location Plan/vicinity Map B. Perspective C. Floor Plans D. Front View Elevation E. Rear View Elevation F. Left Side View Elevation G. Right Side View Elevation H. Longitudinal Section I. Transverse Section 2. Design And Construction Method 3. List Of Contractor’s Personnel To Be Assigned To The Contract To Be Bid With Their Complete Qualification And Experience Data And Photocopy Of Their Valid Licenses Issued By The Professional Regulatory Commission (prc), Curriculum Vitae Of Key Staff, Partners Or Principal Officers With A Minimum Work Experience Requirements Set In The Bds; For Design The Key Professionals And The Respective Qualifications Of The Design Personnel Shall Be As Follows: • Principal Architect The Principal Architect Must Be Duly-licensed With At Least Ten (10) Years’ Experience In The Design Of Residential, Government Offices Or Institutional Facilities, And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. • Structural Engineer The Structural Engineer Must Be A Duly-licensed Civil Engineer With At Least Ten (10) Years’ Experience In Structural Design And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. • Professional Electrical Engineer The Electrical Engineer Must Be A Registered Professional Electrical Engineer With At Least Five (5) Years’ Experience In The Design Of Lighting, Power Distribution, Communication Systems (specifically Structured And Local Area Network Cabling, Pabx), Building Management Systems And Preferably Knowledgeable In Developments In Emergent Efficient Lighting Technologies And Energy Management. • Professional Mechanical Engineer The Mechanical Engineer Must Be A Professional Mechanical Engineer With At Least Five (5) Years In Hvac And Fire Protection Systems And Preferably Knowledgeable In Emergent, Alternative Energy- Efficient Hvac Technologies. • Electronics And Communications Engineer The Electronics And Communications Engineer Must Be Duly-licensed With At Least Ten (5) Years’ Experience In The Design Of Communications Systems, And Preferably Knowledgeable In The Application Of Building Automation And Surveillance Systems. • Sanitary Engineer The Sanitary Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience In The Design Of Building Water Supply And Distribution, Plumbing, And Preferably Knowledgeable In Waste Water Management/treatment, And Emergent, Alternative Effluent Collection And Treatment System. The Design & Build Contractor May, As Needed And At Its Own Expense, Add Additional Professionals And/or Support Personnel For The Optimal Performance Of All Architectural And Engineering Design Services, As Stipulated In These Terms Of Reference, For The Project. Prospective Bidders Shall Attach Each Individual’s Resume And Prc License Of The (professional) Staff. Design Personnel May Also Be Utilized For The Construction Phase Provided That The Same Meet The Minimum Number Of Years Of Experience In The Construction Of Similar Projects. For Construction Personnel The Key Professionals And The Respective Qualifications Of The Construction Personnel Shall Be As Follows: • Project Manager The Project Manager Shall Be A Licensed Architect Or Engineer With At Least Eight (8) Years Relevant Experience On Similar And Comparable Projects In Different Locations. The Project Manager Should Have A Proven Record Or Managerial Capability Through The Directing/managing Of Major Civil Engineering Works, Including Projects Of A Similar Magnitude. • Project Architect/engineer The Project Architect/engineer Shall Be A Licensed Architect Or Engineer With At Least Five (5) Years’ Experience In Similar And Comparable Projects And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. • Materials Engineer (m.e. I) The Materials Engineer Must Be Duly Accredited With The Dpwh And With At Least Five (5) Years’ Experience In Similar And Comparable Projects And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. • Electrical Engineer The Electrical Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience In Similar And Comparable Projects In The Installation Of Lighting, Power Distribution, Communication Systems (specifically Structured And Local Area Network Cabling, Pabx), Building Management Systems. • Mechanical Engineer The Mechanical Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience In Similar And Comparable Projects In The Installation Of Hvac And Fire Protection. • Sanitary Engineer The Sanitary Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience In Similar And Comparable Projects In The Installation Of Building Water Supply And Distribution, Plumbing. • Foreman The Foreman Must Have At Least Five (5) Years’ Experience In Similar And Comparable Projects And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. • Safety Officer The Safety Officer Must Be An Accredited Safety Practitioner By The Department Of Labor And Employment (dole) And Must Have Undergone The Prescribed Forty (40) Hour Construction Safety And Health Training (cosh) And Must Have At Least Two (2) Years’ Experience. 4. Value Engineering Analysis Of Design And Construction. The Second Envelope (financial Proposal) Shall Contain All The Required Documents For Infrastructure Projects Under Section 25.38 Of The Irr Of R.a 9184. 7.2 In The Second Envelope – Financial Proposal The Contents Of Financial Proposal – In The Second Envelope Shall Be Governed By Section 6.1 Design And Build Scheme Of The Dpwh Procurement Manual Volume Ii - Infrastructure Main Guidelines (2016). A. Lump Sum Bid Prices, Which Shall Include The Detailed Engineering Cost, In The Prescribed Bid Form Inclusive Of Vat B. Detailed Estimates Including A Summary Sheet Indicating The Unit Prices Of Construction Materials, Labor Rates And Equipment Rentals Used In Coming Up With The Bid For The Following: I Detailed Architectural And Engineering Design; Ii Demolition Works; And Iii Building Construction/civil Works. C. Bill Of Quantities D. Cash Flow And Payments Schedule. 8. Procedure And Criteria For Bids Evaluation For The Detailed Evaluation Of The Design And Build Proposals A Two-step Procedure Shall Be Adopted By The Bac, Which May Be Undertaken With The Assistance Of The Dbc. First-step Procedure: With The Assistance Of The Bucor Design And Build Committee (bucor-dbc), The Bac Shall Conduct The Opening, Preliminary Examination And Detailed Evaluation Of The Design And Build Proposals, As Follows: (1) The First Step Of The Evaluation Shall Involve The Review Of The Preliminary Conceptual Designs And Track Record Submitted By The Contract As Indicated In The Bidding Documents Using A Nondiscretionary “pass/fail” Criteria That Involve Compliance With The Following Requirements: A. Performance Specifications And Parameters And Degree Of Details; B. Adherence Of Preliminary Design Plans To The Required Concept Of Approach And Methodology For Detailed Engineering, Design And Construction With Emphasis On The Clarity, Feasibility, Innovativeness And Comprehensiveness Of The Plan Approach, And The Quality Of Interpretation Of Project Problems, Risks, And Suggested Solutions; And C. Quality Of Personnel To Be Assigned To The Project Which Covers Suitability Of Key Staff To Perform The Duties Of The Particular Assignments And General Qualifications And Competence Including Education And Training Of The Key Staff. 8.1 Merit Point Critera For The Bid Evaluation 8.1.1 Adherence To Performance Specifications (35 Points) A. Compliance And Adherence To Specifications: Excellent Compliance (100 Points): The Submission Fully Adheres To All Specified Project Requirements And Regulations, Demonstrating Meticulous Attention To Detail And Comprehensive Understanding Of The Tor. All Drawings And Documentation Are Accurate, Complete, And In Compliance With Relevant Standards. Good Compliance (80 Points): The Submission Largely Complies With Project Specifications And Regulations, With Minor Discrepancies. Drawings And Documentation Are Mostly Accurate And Complete, Meeting The Majority Of Requirements. Acceptable Compliance (70 Points): The Submission Satisfies Most Of The Specified Requirements And Regulations, Albeit With Some Notable Omissions Or Inconsistencies. Drawings And Documentation Are Generally Accurate And Complete, Meeting The Basic Expectations. Some Reservations (50 Points): The Submission Partially Meets The Specified Requirements And Regulations, With Several Notable Deficiencies Or Inconsistencies. There Are Significant Gaps Or Inaccuracies In The Drawings And Documentation, Raising Concerns About Compliance. Serious Reservations (20%) The Submission Falls Significantly Short Of Meeting The Specified Requirements And Regulations, With Major Deficiencies Or Inconsistencies. Drawings And Documentation Lack Essential Details Or Fail To Comply With Key Standards, Casting Doubt On The Bidder's Understanding Of The Project Scope. Unacceptable (0%) The Submission Fails To Comply With The Specified Requirements And Regulations, Lacking Essential Details And Demonstrating A Fundamental Misunderstanding Of The Project Scope. Drawings And Documentation Are Incomplete Or Inaccurate, Indicating A Lack Of Capability To Deliver The Project On Time. B. Functionality And Efficiency: Excellent (100%): The Design Optimally Utilizes Space, Facilitating Efficient Accommodation Of 500 Psdl. Layout And Design Enhance Operational Flow, Demonstrating Exceptional Foresight And Planning. Integration Of Facilities Promotes Smooth Prison Management. Good (80%): The Design Effectively Utilizes Space, With Minor Areas For Improvement In Operational Flow. Layout And Design Contribute To Efficient Prison Management, Meeting Most Functional Requirements. Acceptable (70%): The Design Adequately Utilizes Space, Meeting Basic Requirements For Accommodating 500 Psdl. Layout And Design Support Operational Flow, Though Some Improvements Are Needed For Optimal Functionality. Some Reservations (50%): The Design Partially Optimizes Space Utilization, With Notable Deficiencies In Operational Flow. Layout And Design Hinder Efficient Prison Management, Requiring Significant Adjustments For Improvement. Serious Reservations (20%): The Design Inadequately Utilizes Space, Hindering Accommodation Of 500 Psdl. Layout And Design Severely Impede Operational Flow, Indicating A Lack Of Understanding Of Functional Requirements. Unacceptable (0%): The Design Fails To Optimize Space Utilization, Lacking Consideration For Accommodating 500 Psdl. Layout And Design Pose Significant Obstacles To Efficient Prison Management, Indicating A Fundamental Misunderstanding Of Functional Requirements. C. Safety And Security: Excellent (100%): The Design Features Robust Perimeter Walls, Guard Towers, And Security Features Ensuring Optimal Pdl Containment And Facility Security. Fire Protection And Detection Systems Are Highly Reliable, With Comprehensive Safety Measures For Both Psdl And Staff. Good (80%): The Design Incorporates Effective Perimeter Walls, Guard Towers, And Security Features, With Minor Areas For Enhancement. Fire Protection And Detection Systems Are Reliable, With Adequate Safety Measures For Psdl And Staff. Acceptable (70%) The Design Includes Satisfactory Perimeter Walls, Guard Towers, And Security Features, Meeting Basic Requirements For Pdl Containment And Facility Security. Fire Protection And Detection Systems Are Functional, With Sufficient Safety Measures For Psdl And Staff. Some Reservations (50%): The Design Features Partially Effective Perimeter Walls, Guard Towers, And Security Features, With Notable Deficiencies In Pdl Containment And Facility Security. Fire Protection And Detection Systems Lack Reliability, With Limited Safety Measures For Psdl And Staff. Serious Reservations (20%): The Design Lacks Effective Perimeter Walls, Guard Towers, And Security Features, Compromising Pdl Containment And Facility Security. Fire Protection And Detection Systems Are Inadequate, Posing Significant Risks To Psdl And Staff Safety. Unacceptable (0%): The Design Neglects Perimeter Walls, Guard Towers, And Security Features, Failing To Ensure Pdl Containment And Facility Security. Fire Protection And Detection Systems Are Absent Or Non-functional, Posing Severe Risks To Psdl And Staff Safety. D. Sustainability And Environmental Considerations: Excellent (100%): The Design Includes Robust Safety Measures And Emergency Protocols, Ensuring The Safety And Well-being Of Psdl And Staff In Accordance With Ra 10575. Good (80%): The Design Integrates Sustainable Design Principles Effectively, With Minor Opportunities For Improvement In Energy Efficiency And Material Selection. Sewage Treatment And Water Conservation Measures Are Adequate, Supporting Environmental Sustainability. Acceptable (70%) The Design Includes Basic Sustainable Design Principles, Meeting Minimum Requirements For Energy Efficiency And Material Selection. Sewage Treatment And Water Conservation Measures Are Functional, Contributing To Environmental Sustainability. Some Reservations (50%): The Design Partially Incorporates Sustainable Design Principles, With Notable Deficiencies In Energy Efficiency And Material Selection. Sewage Treatment And Water Conservation Measures Lack Comprehensiveness, Limiting Environmental Sustainability. Serious Reservations (20%): The Design Lacks Consideration For Sustainable Design Principles, Neglecting Energy Efficiency And Eco-friendly Materials. Sewage Treatment And Water Conservation Measures Are Insufficient, Undermining Environmental Sustainability. Unacceptable (0%): The Design Disregards Sustainable Design Principles, Showing No Commitment To Energy Efficiency Or Eco-friendly Materials. Sewage Treatment And Water Conservation Measures Are Absent Or Inadequate, Disregarding Environmental Sustainability. E. Aesthetics And Architectural Design: Excellent (100%): The Design Exhibits Exceptional Aesthetic Appeal And Architectural Coherence, Showcasing Innovative And Visually Pleasing Elements. Consideration Of Local Architectural Vernacular And Contextual Integration Is Evident, Contributing To The Overall Excellence Of The Design. Good (80%): The Design Demonstrates Good Aesthetic Appeal And Architectural Coherence, With Some Areas For Enhancement In Creativity And Visual Impact. Consideration Of Local Architectural Vernacular And Contextual Integration Is Apparent, Enriching The Design. Acceptable (70%): The Design Achieves Acceptable Aesthetic Appeal And Architectural Coherence, Meeting Basic Expectations For Visual Presentation. Consideration Of Local Architectural Vernacular And Contextual Integration Is Present, Though Limited In Scope. Some Reservations (50%): The Design Lacks Significant Aesthetic Appeal And Architectural Coherence, With Notable Deficiencies In Creativity And Visual Impact. Consideration Of Local Architectural Vernacular And Contextual Integration Is Minimal, Detracting From The Overall Quality Of The Design. Serious Reservations (20%): The Design Exhibits Poor Aesthetic Appeal And Architectural Coherence, Failing To Engage Visually Or Inspire Interest. Consideration Of Local Architectural Vernacular And Contextual Integration Is Lacking, Diminishing The Design's Relevance And Appropriateness. Unacceptable (0%): The Design Lacks Any Aesthetic Appeal Or Architectural Coherence, Showing No Effort To Engage Visually Or Integrate With The Local Architectural Vernacular. Consideration Of Contextual Integration Is Absent, Rendering The Design Unsuitable For The Project. 8.1.2 Approach And Methodology For Detailed Engineering, Design, And Construction (40 Points) Excellent (100%): The Concept Of Approach And Methodology For Detailed Engineering, Design, And Construction Is Exceptionally Clear, Feasible, Innovative, And Comprehensive. The Plan Demonstrates A High Level Of Understanding Of Project Problems, Risks, And Suggested Solutions, With Well-defined Strategies For Addressing Them. Good (80%): The Concept Of Approach And Methodology For Detailed Engineering, Design, And Construction Is Clear, Feasible, And Comprehensive, With Some Innovative Elements. The Plan Adequately Addresses Project Problems, Risks, And Suggested Solutions, Though Some Areas May Require Further Development. Acceptable (70%): The Concept Of Approach And Methodology For Detailed Engineering, Design, And Construction Satisfactorily Addresses Project Requirements, With A Basic Level Of Clarity And Feasibility. The Plan Outlines Strategies For Addressing Project Problems, Risks, And Suggested Solutions, Meeting The Minimum Expectations. Some Reservations (50%): The Concept Of Approach And Methodology For Detailed Engineering, Design, And Construction Partially Addresses Project Requirements, With Notable Gaps In Clarity And Feasibility. The Plan Lacks Innovative Elements And May Inadequately Address Project Problems, Risks, And Suggested Solutions. Serious Reservations (20%): The Concept Of Approach And Methodology For Detailed Engineering, Design, And Construction Demonstrates Significant Deficiencies In Clarity, Feasibility, And Comprehensiveness. The Plan Fails To Adequately Address Project Problems, Risks, And Suggested Solutions, Indicating A Lack Of Understanding Or Inadequate Planning. Unacceptable (0%): The Concept Of Approach And Methodology For Detailed Engineering, Design, And Construction Is Unclear, Infeasible, And Lacks Comprehensiveness. The Plan Fails To Address Project Problems, Risks, And Suggested Solutions, Indicating A Fundamental Misunderstanding Or Disregard For Project Requirements. 8.1.3 Quality Of Personnel Assigned To The Project (25 Points) Excellent (100%): The Personnel Assigned To The Project, Including Key Staff, Are Highly Suitable And Competent To Perform Their Duties. Key Staff Members Possess Exceptional Qualifications, Competence, Education, And Training Relevant To Their Roles, Demonstrating A High Level Of Expertise And Experience. Good (80%): The Personnel Assigned To The Project, Including Key Staff, Are Suitable And Competent To Perform Their Duties Effectively. Key Staff Members Possess Relevant Qualifications, Competence, Education, And Training, Demonstrating Solid Expertise And Experience. Acceptable (70%): The Personnel Assigned To The Project, Including Key Staff, Meet The Basic Requirements For Suitability And Competence In Performing Their Duties. Key Staff Members Possess General Qualifications And Competence, Education, And Training Relevant To Their Roles, Meeting The Minimum Expectations. Some Reservations (50%): The Personnel Assigned To The Project, Including Key Staff, Demonstrate Some Suitability And Competence In Performing Their Duties, But Notable Deficiencies Are Present. Key Staff Members May Lack Certain Qualifications, Competence, Education, Or Training, Raising Concerns About Their Ability To Effectively Fulfill Their Roles. Serious Reservations (20%): The Personnel Assigned To The Project, Including Key Staff, Exhibit Significant Deficiencies In Suitability And Competence To Perform Their Duties. Key Staff Members Lack Essential Qualifications, Competence, Education, Or Training, Indicating A Lack Of Expertise Or Experience Relevant To Their Roles. Unacceptable (0%): The Personnel Assigned To The Project, Including Key Staff, Are Unsuitable And Incompetent To Perform Their Duties Effectively. Key Staff Members Lack The Necessary Qualifications, Competence, Education, And Training, Demonstrating A Fundamental Mismatch With The Requirements Of Their Roles. 8.2 Determination Of The Merit Point Score The Aggregate Of The Scores In Each Criterion Must Be 70% Or More To Pass Using The Following Formula In Equation. Description Weight (w) Rating (r) Criteria 1 35% (smax/sact) Criteria 2 40% Sact Criteria 3 25% Sact Smax = Η (100) Sact = R1 +r2 +r3 + . . .(rη) Where Η = Number Of Sub Criteria R = Rating Given To The Criteria/sub Criteria The Actual Score (sact) For Each Of The Criteria/sub Criteria Is Obtained By Adding All The Given Rating. (smax) Is The Summation Of Maximum Score Per Criteria 8.3 Passing Rate The Specific Passing Rate Value Depends On The Specific Context Of The Project, The Priorities Of The Design And Build Committee, And The Complexity Of The Requirements Outlined In Ra 10575. Based On The Provided Criteria And Descriptions, The Passing Rate For The Merit Point Criteria (mpc) Could Be Set At 75%. This Means That Bidders Must Score At Least 75% Or Higher In The Evaluation Process To Be Considered As Meeting The Minimum Requirements For The Project A. Pass Rate Per Criteria Will Be Determined Using The Formula: Score = W1*r1 + W2*r2 + W3*r3 B. A Bid Or Technical Bid That Failed In Any Of The Criteria’s Will Not Be Considered For Further Evaluation C. Score Above 75% Will Be Considered As Technically Responsive. Aggregate Score Of Less Than 75% Will Be Considered Failed, And May Be Rejected On That Basis. Second-step Procedure: Only Those Bids That Passed The Above Criteria Shall Be Subjected To The Second Step Of Evaluation. The Bac Shall Open The Financial Proposal Of Each “passed” Bidder And Shall Evaluate It Using Non-discretionary Criteria – Including Arithmetical Corrections For Computational Errors – As Stated In The Bidding Documents, And Thus Determine The Correct Total Calculated Prices. The Bac Shall Automatically Disqualify Any Total Calculated Bid Price Which Exceeds The Abc 9. Data To Be Provided By The Bucor These Data Are For Reference Only And Does Not Guarantee The Contractor That The Data Provided Are Correct, Free From Error, And Applicable To The Project At Hand. The Contractor Is Responsible For The Accuracy Or Applicability Of Any Data That He Will Use In His Design– Build Proposal And Services. Sample Data For Buildings: A. Conceptual Plans 10. Documents To Be Provided By The Contractor During Contract Implementation A. Detailed Architectural And Engineering Plans B. Design Analysis C. Survey Data D. Quantity Calculation E. Detailed Geotechnical Investigation Report F. Design Report. G. As-built Plans, (printed Including Cad Files And Bim Files (lod 500) H. Other Relevant Documents 11. Design And Build Period The Winning Bidder Shall Commence Actual Works Upon The Issuance By The Bucor Of The Notice To Proceed (ntp). The Winning Bidder Shall Complete The Daed And Submit Within The Ninety (60) Calendar Days (cds) Period To The Bucor For Review And Approval. The Contractor Shall Complete The Construction Of The Building Within 305 Cds For The Total Contract Duration Of 365 Cd. Conforme: Name Of Company In Print Signature Over Printed Name Of Authorized Representative/date Section Vii. Drawings The Conceptual Drawings Should Be Attached To This Section Or Annexed In A Separate Folder As Part Of The First Envelope (technical Component Envelope). Preliminary Conceptual Architectural Design Plans In Accordance With The Degree Of Details Specified By The Procuring Entity: At Suitable Scale On High Quality A3 Blue Print Paper /digital Print Minimum Size) 1. Location Plan/vicinity Map 2. Perspective 3. Floor Plans 4. Front View Elevation 5. Rear View Elevation 6. Left Side View Elevation 7. Right Side View Elevation 8. Longitudinal Section 9. Transverse Section Section Viii. Bill Of Quantities The Bill Of Quantities Should Be Attached To This Section As Part Of The Second Envelope (financial Component Envelope). Section Ix. Checklist Of Technical And Financial Documents Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; Technical Documents ⬜ (b) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided Under The Rules; And ⬜ (d) Special Pcab License In Case Of Joint Ventures And Registration For The Type And Cost Of The Contract To Be Bid; And ⬜ (e) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And (f) Project Requirements, Which Shall Include The Following: ⬜ A. Organizational Chart For The Contract To Be Bid; ⬜ B. List Of Contractor’s Key Personnel (e.g., Project Manager, Project Engineers, Materials Engineers, And Foremen), To Be Assigned To The Contract To Be Bid With Their Complete Qualification And Experience Data And Photocopy Of Their Valid Licenses Issued By The Professional Regulatory Commission (prc) And Curriculum Vitae Of Key Staff, Partners Or Principal Officers With A Minimum Work Experience Requirements Set In The Bds; ⬜ C. List Of Contractor’s Major Equipment Units, Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership Or Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be; And ⬜ (g) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate Or Board Resolution/partnership Resolution In Case Of A Corporation, Partnership, Or Cooperative; Or Original Notarized Special Power Of Attorney In Case Of Sole Proprietorship Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. And ⬜ (h) Conformity With The Technical Specifications (scope Of Work); And ⬜ (i) Preliminary Conceptual Architectural Design Plans In Accordance With The Degree Of Details Specified By The Procuring Entity: (at Suitable Scale On High Quality A3 Blue Print Paper /digital Print Minimum Size) 1. Location Plan/vicinity Map 2. Perspective 3. Floor Plans 4. Front View Elevation 5. Rear View Elevation 6. Left Side View Elevation 7. Right Side View Elevation 8. Longitudinal Section 9. Transverse Section ⬜ (j) Design And Construction Method And ⬜ (k) Value Engineering Analysis Of The Design And Construction Method. And Financial Documents ⬜ (l) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc. And Class “b” Documents ⬜ (m) Jv Bidders Shall Submit A Jva In Accordance With R.a. 4566 And Its Irr. Each Partner Of The Joint Venture Shall Submit Their Respective Philgeps Certificates Of Registration In Accordance With Section 8.5.2 Of This Irr. The Submission Of Technical And Financial Eligibility Documents By Any Of The Joint Venture Partners Constitutes Compliance: Provided, That The Partner Responsible To Submit The Nfcc Shall Likewise Submit The Statement Of All Of Its Ongoing Contracts And Audited Financial Statements. Ii. Financial Component Envelope ⬜ (n) Original Of Duly Signed And Accomplished Financial Bid Form; And Other Documentary Requirements Under Ra No. 9184 ⬜ (o) Original Of Duly Signed Bid Prices In The Bill Of Quantities; And ⬜ (p) Duly Accomplished Detailed Estimates Form, Including A Summary Sheet Indicating The Unit Prices Of Construction Materials, Labor Rates, And Equipment Rentals Used In Coming Up With The Bid; And ⬜ (q) Cash Flow And Payment Schedule. Bidding Form Company Letterhead Statement Of Ongoing Government & Private Contracts Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) Statement Of All Its Ongoing Government And Or Private Contracts Including Contracts Awarded But Not Yet Started, If Any Whether Similar Or Not Similar In Nature. Name Of Contract Date Of Contract Contract Duration Owner’s Name And Address Nature Of Work Contractor’s Role (whether Sole Contractor, Subcontractor, Or Partner In A Jv) And Percentage Of Participation Total Contract Value At Award Date Of Completion Or Estimated Completion Time Value Of Outstanding Works Certified Correct: Name And Signature Of Authorized Representative Position Date Company Letterhead Statement Of Single Largest Completed Contract Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) Statement Of Single (1) Largest Completed Contract Of Similar In Nature Within The Last Six (6) Years From The Date Of Submission And Receipt Of Bids Amounting To At Least Fifty Percent (50%) Of The Approved Budget Of The Contract (abc) Name Of Contract Date Of Contract Contract Duration Owner’s Name And Address Nature Of Work Contractor’s Role (whether Sole Contractor, Subcontractor, Or Partner In A Jv) And Percentage Of Participation Total Contract Value At Award Amount Of Completed Contracts, Adjusted By The Bidder To Current Prices Using Psa’s Consumer Price Index, If Necessary Date Of Completion Or Estimated Completion Time Certified Correct: Name And Signature Of Authorized Representative Position Date Company Letterhead Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) Republic Of The Philippines) City Of _______________________) S.s. X------------------------------------------------------x Bid Securing Declaration Invitation To Bid: [insert Reference Number] To: Bureau Of Corrections I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid-securing Declaration. 2. I/we Accept That: (a) I/we Will Be Automatically Disqualified From Bidding For Any Contract With Any Procuring Entity For A Period Of Two (2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen (15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1, Except 69.1(f), Of The Irr Of Ra 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid Securing Declaration Shall Cease To Be Valid On The Following Circumstances: (a) Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; (b) I Am/we Are Declared Ineligible Or Post-disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; (c) I Am/we Are Declared The Bidder With The Lowest Calculated Responsive Bid, And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ____ Day Of [month] [year] At [place Of Execution]. ______________________________________________________ [insert Name Of Bidder’s Authorized Representative] _____________________________ [insert Signatory’s Legal Capacity] Affiant Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ____________ Issued On ______________ At ___________________________________. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued Doc. No. _____ Page No. _____ Book No. _____ Series Of ____ Company Letterhead Omnibus Sworn Statement Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) _________________________________________________________________________ Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) Of The Bureau Of Corrections, As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) Of The Bureau Of Corrections, As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase). 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 2024 At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory Affiant Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ____________ And Issued On ____________________ At _____________________. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued] Doc. No. _____ Page No. _____ Book No. _____ Series Of _____ Company Letterhead Certificate Of Net Financial Contracting Capacity Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) (please Show Figures At How You Arrived At The Nfcc) This Is To Certify That Our Net Financial Contracting Capacity (nfcc) Is _____________________ (p____________) Which Is At Least Equal To The Total Ceiling Price We Are Bidding. The Amount Is Computed As Follows: (please Show Computation Of Nfcc) Nfcc = (ca-cl) (15) – C Where: Ca = Current Assets Cl = Current Liabilities C = Value Of All Outstanding Or Uncompleted Portions Of The Projects Under Going Contracts, Including Awarded Contracts Yet To Be Started Coinciding With The Contract For This Project Note: The Values Of The Bidder’s Current Assets And Current Liabilities Shall Be Based On The Audited Financial Statement Submitted To The Bir. Issued This _________________day Of ________________, 2024 _______________________________________________ Name & Signature Of Authorized Representative ____________________ Position _______________ Date Company Letterhead Bid Form Date: Ib No: To Bids And Awards Committee Bureau Of Corrections Nbp Reservation Muntinlupa City We, The Undersigned, Declare That: (a) We Have Examined And Have No Reservation To The Bidding Documents, Including Addenda, For The Contract Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) (b) We Offer To Execute The Works For This Contract In Accordance With The Bid And Bid Data Sheet, General And Special Conditions Of Contract Accompanying This Bid; The Total Price Of Our Bid, Excluding Any Discounts Offered Below Is: ________________________________________₱_________________; The Discounts Offered And The Methodology For Their Application Are: [insert Information]; (c) Our Bid Shall Be Valid For A Period Of 120 Calendar Days From The Date Fixed For The Bid Submission Deadline In Accordance With The Bidding Documents, And It Shall Remain Binding Upon Us And May Be Accepted At Any Time Before The Expiration Of That Period; (d) If Our Bid Is Accepted, We Commit To Obtain A Performance Security In The Amount Of 30% Percent Of The Contract Price For The Due Performance Of The Contract; (e) Our Firm, Including Any Subcontractors Or Suppliers For Any Part Of The Contract, Have Nationalities From The Following Eligible Countries; (f) We Are Not Participating, As Bidders, In More Than One Bid In This Bidding Process, Other Than Alternative Offers In Accordance With The Bidding Documents; (g) Our Firm, Its Affiliates Or Subsidiaries, Including Any Subcontractors Or Suppliers For Any Part Of The Contract, Has Not Been Declared Ineligible By The Funding Source; (h) We Understand That This Bid, Together With Your Written Acceptance Thereof Included In Your Notification Of Award, Shall Constitute A Binding Contract Between Us, Until A Formal Contract Is Prepared And Executed; And (i) We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Other Bid That You May Receive. (j) We Likewise Certify/confirm That The Undersigned, Is The Duly Authorized Representative Of The Bidder, And Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For The Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) Of The Bureau Of Corrections. (k) We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Including The Bill Of Quantities, Shall Be A Ground For The Rejection Of Our Bid. Name: In The Capacity Of: Signed: Duly Authorized To Sign The Bid For And On Behalf Of: Date: ___________