Transportation Tenders

Purchaser Name: FEDERAL PUBLIC INSTITUTION THE MAIN CENTER OF ADMINISTRATIVE, ECONOMIC AND TRANSPORTATION SUPPORT OF | Тендер Поставка Венков С Лентами, Корзин Плетеных Из Срезанных Цветов С Лентами, Гвоздик, Букетов И Композиций Из Свежесрезанных Цветов Для Нужд Мвд России.

Details: The City of Hämeenlinna (hereinafter also the Procurement Unit / Customer) Requests a participation application for passenger transport in accordance with this Request for Participation and its Appendices. It is a Dynamic Procurement System (dps), through which passenger transports are tendered at that stage, if they cannot be managed through the customer's other procurement contracts (including framework arrangements). Therefore, the Anticipated Value of the Purchase is a so-called Rough Estimate, and the transportation needs can vary significantly from year to year. This is an estimate that does not bind the procurement unit. The Anticipated Value May Be Greater If Options Are Used.","","the Procurement Unit Emphasizes That Even If A Candidate Is Accepted For This Dynamic Procurement System, The Candidate Will Not Necessarily Get Any Transportation To Handle. By Submitting the Application for Participation, the Candidate Has Accepted This Matter as well.","","The Application for Participation in the dynamic procurement system can be submitted at any time during its validity. The validity of the procurement system can be extended with a new procurement notice. The procurement system consists of the so-called establishment phase and the so-called procurement phase. In the establishment phase, applications for participation are accepted, but tenders within the procurement system are not organized yet. During the procurement phase, applications for participation are accepted and, if necessary, tenders within the procurement system are organized.","","After the establishment phase, the decision to accept (or reject) the candidate for the dynamic procurement system will be made within 30 working days of the end of the establishment phase. After that, the decision will be made within ten working days after the application for participation has been received; If additional documents need to be examined in the acceptance evaluation, or if eligibility requirements have to be checked or if there is another justified reason, the decision will be made within 15 working days after the application for participation has been received. - Or during the autumn holidays, and not from Midsummer until mid-August. This can happen, for example, so that the Procurement Unit closes the Dynamic Procurement System Temporarily.

Details: Description Republic Of The Philippines Province Of Sorsogon Municipality Of Irosin Bids & Awards Committee Invitation To Bid For Supply & Delivery Of Information Technology Equipment And Supplies For Disaster Risk Reduction Emergency Operations Center 1. The Local Government Unit Of Irosin, Through The Ldrrmf 2024/unexpended Balance Drrmf Cy 2022 Intends To Apply The Sum Of Five Hundred Four Thousand Eight Hundred Pesos (p 504,800.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Supply & Delivery Of Information Technology Equipment And Supplies For Disaster Risk Reduction Emergency Operations Center, Good-43-2024. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Name Of Contract : Supply & Delivery Of Information Technology Equipment And Supplies For Disaster Risk Reduction Emergency Operations Center Brief Description: 2units Desktop: All-in-one, I5 Processor, 23.8” Full Hd Borderless Ips Display (non-touch), Windows 11 Home, 8gb Ddr5 Ram 5600, 512gb Ssd, Wireless Keyboard & Mouse, Integrated Wi-fi 7 & Bluetooth, Integrated 5mp Fhd Webcam With Privacy Shutter/ 3pcs External Hard Drive: 2tb, Mechanical Hard Disk, Usb 3.0, 5400rpm, 2.5-inch, 5400 Rpm/4pcs Usb Flash Drive: 64gb, Usb 3.0, Usb 3.0 (backwards Compatible With Usb 2.0), 0.26” X 1.67” X 0.52”, Up To 150mb/s/ 1pc Laptop: I5 Process 120u, 8gb Ram, 512gb Nvme Ssd, 15.6” Display With Ips (in-plane Switching) Technology, Intel ® Graphics, Windows 11 Home, Microsoft Office For Home And Student 2021/ 5units Ups: Run Time For Load 410 W: 0 Min 43s, Main Input Voltage: 230v, Rated Power In W: 410w, Rated Power In Va: 750 Va, Output Connection Type: 4 Iec 60320 C13, Cable Length: 1.22m, Number Of Cables: 1, Battery Type: Lead-acid Battery/ 1pc Printer: A4 Wi-fi Duplex All-in-one Ink Tank Printer, Compact Integrated Tank Design, Print Speeds Up To 10.5ipm For Black And 5.0ipm For Colour, Auto-duplex Printing, Wi-fi & Wi-fi Direct, Borderless Printing Up To A4 Size, Spill-free Ink Refilling/ 1unit Aircon: 2hp Inverter Split Type, Gold In, High Energy Efficiency, Pcb Protection, Refrigerant Leakage Detection, High-grade Plastic Panel (fcu), Powder Painted Metal (cdu), Self-clean, Intelligent Ducting Switch, Emergency Function Use, 4 Way Airflow, Heap Filter/ 3pc 4 Drawer Vertical Cabinet Recessed Handle, Storage Cabinet, Cupboard, Steel Filling Cabinet/ 1pc Black Leather Reclining Executive Chair With Ergonomic Function, Rotatable And Adjustable; With Footrest/3pc Electric Stand Fan; 3pc Industrial Fan: 26” (60mm) Metal Blade, Motor: 250w, 3 Speed, Fan Speed: 1,600rpm, Low Noise, Adjustable Height, Adjustable Panning/oscillation Angle, Cast Iron Base/ 2pc Heavy Duty Industrial Mobile Fan: 24” (600mm) 3-leaf Metal Fan Blade, 170w, 3-speed Settings, Max Speed: 1,110rpm, Max Airflow: 302 M3 /min, 360° Rotation Of The Fan In Its Stand, Non-continuous Rotary Switch, Powder-coated Stand And Drum Enclosure, Sealed Type Bearing Motor, Durable Plastic Side Handles, Mobile Wheel For Easy Transfer, Non-skid Rubber Footing, Equipped With Resettable Thermal Fuse (tco), Double Insulated Ac Cord, Dimensions: 76 X 30 X 76 Cm (l X W X H)/ 1pc Magnetic Whiteboard With Stand: Double Sided (90cm X 120cm)/ 3pc Whiteboard (90cm X 120cm)/ 10pc Storage Box: 155l Approved Budget For The Contract : P 504,800.00 Contract Duration : 30 Calendar Days Delivery Period : 7 Calendar Days After The Issuance Of Notice To Proceed Source Of Fund : Ldrrmf 2024/unexpended Balance Drrmf Cy 2022 2. The Local Government Unit Of Irosin Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Seven(7) Calendar Days. Bidders Should Have Completed For The Last Two(2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent(60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Priveleges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Local Government Unit Of Irosin And Inspect The Bidding Documents At The Address Given Below From 8:00 Am-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 21, 2024, November 28, 2024 From The Given Address And Philgeps Website And Lgu-irosin Website And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (p 1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees By Presenting In Person The Official Receipt Of Bid Documents To The Bac Office. 6. The Local Government Unit Of Irosin Will Not Hold A Pre-bid Conference. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before November 28, 2024, 8:59 Am At Bac Office, Municipal Compound, San Julian, Irosin, Sorsogon. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On November 28, 2024, 9:00 Am At The Given Address Below Conference Room, Office Of The Mayor, Municipal Compound, San Julian, Irosin, Sorsogon. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Irosin Reserves The Right To Accept Any And All Bids, Declare A Failure Of Bidding Or Not Award A Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations(irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11.for Further Information, Please Refer To: Fritzie Riva L. Michelena Mdrrmo Municipal Compound, San Julian, Irosin, Sorsogon Url: Www.irosin.gov.ph 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website And Www.irosin.gov.ph Date Of Issue: November 21, 2024 _____________________ Noel D. Mercado Ii Bac Chairman Instruction To Bidders 1. Scope Of Bid The Procuring Entity, Local Government Unit Of Irosin Invites Bids For The Supply & Delivery Of Information Technology And Supplies For Disaster Risk Reduction Emergency Operations Center, With Project Identification Number Good-43-2024. [note: The Project Identification Number Is Assigned By The Procuring Entity Based On Its Own Coding Scheme And Is Not The Same As The Philgeps Reference Number, Which Is Generated After The Posting Of The Bid Opportunity On The Philgeps Website.] The Procurement Project (referred To Herein As “project”) Is Composed Of 1 Lot Nutribun, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding Ldrrmf 2024/unexpended Balance Drrmf Cy 2022 As Indicated Below For In The Amount Of Five Hundred Four Thousand Eight Hundred Pesos (p 504,800.00). 2.2. The Source Of Funding Is: Ldrrmf 2024/unexpended Balance Drrmf Cy 2022 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manual And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Invitation To Bid By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Inspected The Site, Determined The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A.foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or B. Foreign Ownership Limited To Those Allowed Under The Rules May Participate In This Project. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No. 9184, The Bidder Shall Have An Slcc That Is At Least One(1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must At Least Equivalent To: A. For The Procurement Of Expandable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.2 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 7.2 Subcontracting Is Not Allowed During The Bidding. 7.3 Subcontracting Is Not Allowed During The Contract Implementation Stage. 7.4 Subcontracting Of Any Portion Of The Project Does Not Relieve The Supplier Of Any Liability Or Obligation Under The Contract. The Supplier Will Be Responsible For The Acts, Defaults, And Negligence Of Any Subcontractor, Its Agents, Servants, Or Workmen As Fully As If These Were The Contractor’s Own Acts, Defaults, Or Negligence, Or Those Of Its Agents, Servants, Or Workmen. 8. Pre-bid Conference The Procuring Entity Will Not Hold A Pre-bid Conference For This Project. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii( Checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicted In Itb Clause 5.3 Should Have Completed Within The Last Two(2) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostile Convention, Only The Translated Documents Shall Be Authenticated Through The Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii( Checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification From Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 3184. 12. Bid Prices 12.1 Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A.for Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw(ex-works,ex-factory,ex-warehouse,ex-showroom, Or Off The Shelf, As Applicable); Ii. The Cost Of All Custom Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other(incidental) Services, If Any, Listed In The Bds. 13. Bid And Payment Currencies 14.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Adopted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreigh Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 14.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos 14. Bid Security 15.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 15.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty(120) Calendar Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission To The Given Website Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 16. Deadline For Submission Of Bids The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 18.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 18.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1 The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 14 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii(technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Option 1- One Project Having Several Items That Shall Be Awarded As One Contract. 20. Post Qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps), And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A.supply & Delivery Of Information Technology Equipment And Supplies For Disaster Risk Reduction Operations Center Brief Description: 2units Desktop: All-in-one, I5 Processor, 23.8” Full Hd Borderless Ips Display (non-touch), Windows 11 Home, 8gb Ddr5 Ram 5600, 512gb Ssd, Wireless Keyboard & Mouse, Integrated Wi-fi 7 & Bluetooth, Integrated 5mp Fhd Webcam With Privacy Shutter/ 3pcs External Hard Drive: 2tb, Mechanical Hard Disk, Usb 3.0, 5400rpm, 2.5-inch, 5400 Rpm/4pcs Usb Flash Drive: 64gb, Usb 3.0, Usb 3.0 (backwards Compatible With Usb 2.0), 0.26” X 1.67” X 0.52”, Up To 150mb/s/ 1pc Laptop: I5 Process 120u, 8gb Ram, 512gb Nvme Ssd, 15.6” Display With Ips (in-plane Switching) Technology, Intel ® Graphics, Windows 11 Home, Microsoft Office For Home And Student 2021/ 5units Ups: Run Time For Load 410 W: 0 Min 43s, Main Input Voltage: 230v, Rated Power In W: 410w, Rated Power In Va: 750 Va, Output Connection Type: 4 Iec 60320 C13, Cable Length: 1.22m, Number Of Cables: 1, Battery Type: Lead-acid Battery/ 1pc Printer: A4 Wi-fi Duplex All-in-one Ink Tank Printer, Compact Integrated Tank Design, Print Speeds Up To 10.5ipm For Black And 5.0ipm For Colour, Auto-duplex Printing, Wi-fi & Wi-fi Direct, Borderless Printing Up To A4 Size, Spill-free Ink Refilling/ 1unit Aircon: 2hp Inverter Split Type, Gold In, High Energy Efficiency, Pcb Protection, Refrigerant Leakage Detection, High-grade Plastic Panel (fcu), Powder Painted Metal (cdu), Self-clean, Intelligent Ducting Switch, Emergency Function Use, 4 Way Airflow, Heap Filter/ 3pc 4 Drawer Vertical Cabinet Recessed Handle, Storage Cabinet, Cupboard, Steel Filling Cabinet/ 1pc Black Leather Reclining Executive Chair With Ergonomic Function, Rotatable And Adjustable; With Footrest/3pc Electric Stand Fan; 3pc Industrial Fan: 26” (60mm) Metal Blade, Motor: 250w, 3 Speed, Fan Speed: 1,600rpm, Low Noise, Adjustable Height, Adjustable Panning/oscillation Angle, Cast Iron Base/ 2pc Heavy Duty Industrial Mobile Fan: 24” (600mm) 3-leaf Metal Fan Blade, 170w, 3-speed Settings, Max Speed: 1,110rpm, Max Airflow: 302 M3 /min, 360° Rotation Of The Fan In Its Stand, Non-continuous Rotary Switch, Powder-coated Stand And Drum Enclosure, Sealed Type Bearing Motor, Durable Plastic Side Handles, Mobile Wheel For Easy Transfer, Non-skid Rubber Footing, Equipped With Resettable Thermal Fuse (tco), Double Insulated Ac Cord, Dimensions: 76 X 30 X 76 Cm (l X W X H)/ 1pc Magnetic Whiteboard With Stand: Double Sided (90cm X 120cm)/ 3pc Whiteboard (90cm X 120cm)/ 10pc Storage Box: 155l B. Completed Within The Last Two(2) Years From The Date Of The Submission Of Bids 7.1 Not Applicable Since Sub-contracting Is Not Allowed. 12 The Price Of Goods Shall Be Quoted Ddp Lgu-irosin, Irosin, Sorsogon. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration Or Any Of The Following Forms And Amounts: A. [two Percent (2%) Of Abc], If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; B. [five Percent (5%) Of Abc] If Bid Security Is In Surety Bond. 19.3 Information Technology And Supplies 2units Desktop: All-in-one, I5 Processor, 23.8” Full Hd Borderless Ips Display (non-touch), Windows 11 Home, 8gb Ddr5 Ram 5600, 512gb Ssd, Wireless Keyboard & Mouse, Integrated Wi-fi 7 & Bluetooth, Integrated 5mp Fhd Webcam With Privacy Shutter/ 3pcs External Hard Drive: 2tb, Mechanical Hard Disk, Usb 3.0, 5400rpm, 2.5-inch, 5400 Rpm/4pcs Usb Flash Drive: 64gb, Usb 3.0, Usb 3.0 (backwards Compatible With Usb 2.0), 0.26” X 1.67” X 0.52”, Up To 150mb/s/ 1pc Laptop: I5 Process 120u, 8gb Ram, 512gb Nvme Ssd, 15.6” Display With Ips (in-plane Switching) Technology, Intel ® Graphics, Windows 11 Home, Microsoft Office For Home And Student 2021/ 5units Ups: Run Time For Load 410 W: 0 Min 43s, Main Input Voltage: 230v, Rated Power In W: 410w, Rated Power In Va: 750 Va, Output Connection Type: 4 Iec 60320 C13, Cable Length: 1.22m, Number Of Cables: 1, Battery Type: Lead-acid Battery/ 1pc Printer: A4 Wi-fi Duplex All-in-one Ink Tank Printer, Compact Integrated Tank Design, Print Speeds Up To 10.5ipm For Black And 5.0ipm For Colour, Auto-duplex Printing, Wi-fi & Wi-fi Direct, Borderless Printing Up To A4 Size, Spill-free Ink Refilling/ 1unit Aircon: 2hp Inverter Split Type, Gold In, High Energy Efficiency, Pcb Protection, Refrigerant Leakage Detection, High-grade Plastic Panel (fcu), Powder Painted Metal (cdu), Self-clean, Intelligent Ducting Switch, Emergency Function Use, 4 Way Airflow, Heap Filter/ 3pc 4 Drawer Vertical Cabinet Recessed Handle, Storage Cabinet, Cupboard, Steel Filling Cabinet/ 1pc Black Leather Reclining Executive Chair With Ergonomic Function, Rotatable And Adjustable; With Footrest/3pc Electric Stand Fan; 3pc Industrial Fan: 26” (60mm) Metal Blade, Motor: 250w, 3 Speed, Fan Speed: 1,600rpm, Low Noise, Adjustable Height, Adjustable Panning/oscillation Angle, Cast Iron Base/ 2pc Heavy Duty Industrial Mobile Fan: 24” (600mm) 3-leaf Metal Fan Blade, 170w, 3-speed Settings, Max Speed: 1,110rpm, Max Airflow: 302 M3 /min, 360° Rotation Of The Fan In Its Stand, Non-continuous Rotary Switch, Powder-coated Stand And Drum Enclosure, Sealed Type Bearing Motor, Durable Plastic Side Handles, Mobile Wheel For Easy Transfer, Non-skid Rubber Footing, Equipped With Resettable Thermal Fuse (tco), Double Insulated Ac Cord, Dimensions: 76 X 30 X 76 Cm (l X W X H)/ 1pc Magnetic Whiteboard With Stand: Double Sided (90cm X 120cm)/ 3pc Whiteboard (90cm X 120cm)/ 10pc Storage Box: 155l 20.2 Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It: Bir Registration 21.2 Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It: None General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract(scc). 2. Advance Payment 2.1 Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2 The Procuring Entity Is Allowed To Determine The Terms Of The Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr. 4. Inspection And Tests The Procuring Entity Or Its Representatives Shall Have The Right To Inspect And/or The Test The Goods To Confirm Their Conformity To The Project. In Addition To Tests In The Scc, Section Vii(technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identify Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 7.1. In Order To Assure The Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 7.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines] “the Delivery Terms Applicable To This Contract Are Delivered [indicate Place Of Destination]. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is Wilson G. Baliwas. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; D. Performance Or Supervision Or Maintenance And/or Repair Of The Supplied Goods, For A Period Of Time Agreed By The Parties, Provided That This Service Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And E. Training Of The Procuring Entity’s Personnel, At The Supplier’s Plant And/or On-site, In Assembly, Start-up, Operation, Maintenance, And/or Repair Of The Supplied Goods. F. No Additional Incidental Service Requirements. The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Spare Parts – The Supplier Is Required To Provide All Of The Following Materials, Notifications, And Information Pertaining To Spare Parts Manufactured Or Distributed By The Supplier: 1. Such Spare Parts As The Procuring Entity May Elect To Purchase From The Supplier, Provided That This Election Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And 2. In The Event Of Termination Of Production Of The Spare Parts: I. Advance Notification To The Procuring Entity Of The Pending Termination, In Sufficient Time To Permit The Procuring Entity To Procure Needed Requirements; And Ii. Following Such Termination, Furnishing At No Cost To The Procuring Entity, The Blueprints, Drawings, And Specifications Of The Spare Parts, If Requested. The Spare Parts And Other Components Required Are Listed In Section Vi (schedule Of Requirements) And The Costs Thereof Are Included In The Contract Price. The Supplier Shall Carry Sufficient Inventories To Assure Ex-stock Supply Of Consumable Spare Parts Or Components For The Goods For A Period Of Twelve(12) Months. Spare Parts Or Components Shall Be Supplied As Promptly As Possible, But In Any Case, Within Twelve(12) Months Of Placing The Order. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions Any Relevant Hazchem Classifications A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Intellectual Property Rights – The Supplier Shall Indemnify The Procuring Entity Against All Third-party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 2.2 Partial Payment Is Applicable Provided That Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted. 4 The Inspections And Tests That Will Be Conducted Are: Inspection Of The Information Technology Equipment And Supplies If It Follows The Technical Specification Set By The End-user Units. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Desktop All-in-one 2unit 2 External Harddrive 3pcs 3 Usb Flashddrive 4pcs 4 Laptop 1 Pc 5 Ups 5unit 6 Printer 1pc 7 Aircon 1unit 8 4 Drawer Vertical Cabinet 3pcs 9 Reclining Executive Chair 1pc 10 Electric Stand Fan 3pcs 11 Industrial Fan 3 Pcs 12 Heavy Duty Industrial Mobile Fan 2pcs 13 Magnetic Whiteboard With Stand 1pc 14 Whiteboard 3pcs 15 Storage Box 10pcs Remarks Indicate Here Any Other Appropriate Information As May Be Necessary. Signature Over Printed Name Position Department/division Section Vii. Technical Specifications Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Desktop All-in-one 2 External Harddrive 3 Usb Flashdrive 4 Laptop 5 Ups 6 Printer 7 Aircon 8 4 Drawer Vertical Cabinet 9 Reclining Executive Chair 10 Electric Stand Fan 11 Industrial Fan 12 Heavy Duty Industrial Mobile Fan 13 Magnetic Whiteboard With Stand 14 Whiteboard 15 Storage Box Technical Specifications Technical Specifications Item / Service Maximum Quantity Technical Specifications / Scope Of Work Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution.] Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; (b) Registration From Sec, Department Of Trade And Industry(dti) For Sole Proprietorship And Cda For Cooperatives (c) Valid Mayor’s Permit By The City Or Municipality Where The Principal Place Of Business Is Located (d) Tax Clearance Per Eo 398 Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (d) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (e) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (f) Original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (g) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. (h) Audited Financial Statement Stamped, Received By The Bir Or Its Duly Accredited And Authorized Institutions, For The Immediately Preceding Calendar Year, Showing The Total Assets And Liabilities Which Should Not Be Earlier Than Two(2) Years From The Date Of Bid Submission Class “b” Documents ⬜ (i) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (j) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (k) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (l) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (m) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.   Omnibus Sworn Statement(revised) Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. Select One, Delete The Other: If A Sole Proprietorship: I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. Select One, Delete The Other: If A Sole Proprietorship: As The Owner And Sole Proprietor Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] As Shown In The Attached Duly Notarized Special Power Of Attorney; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g. Duly Notarized Secretary’s Certificate, Board/partnership Resolution Or Special Power Of Attorney, Whichever Is Applicable]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For And In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. Select One, Delete The Rest: If A Sole Proprietorship: The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Partnership Or Cooperative: None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Corporation Or Joint Venture: None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Following Responsibilities As A Bidder: A) Carefully Examine All Of The Bidding Documents; B) Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C) Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D) Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay, Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Of Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling(estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 Series Of 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This ___________ Day Of __________________, 2024 At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory [insert Signatory’s Legal Capacity] Affiant Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. ______________ Page No: ______________ Book No. ______________ Series Of 2024. Republic Of The Philipppines ) City Of Sorsogon ) S.s. X ---------------------------------------------------x Bid Securing Declaration Project Identification No. ______ To: [insert Name And Address Of Procuring Entity] I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid-securing Declaration. 2. I/we Accept That: (a) I Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of Two(2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen(15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1(f) Of The Irr Of Ra No. 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid-securing Declaration Shall Cease To Be Valid On The Following Circumstances: (a) Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; (b) I Am Declared Ineligible Or Post Disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; And (c) I Am/we Declared As The Bidder With The Lowest Calculated And Responsive Bid And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I Have Hereunto Set My Hand This _____ Day Of ________, 2024 At __________________. _____________________________________ Bidder’s Representative/authorized Signatory [insert Signatory’s Legal Capacity] Affiant Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. __________ Page No. __________ Book No. __________ Series Of 2024. Bid Form For The Procurement Of Goods (shall Be Submitted With The Bid) Bid Form Date: _____________________________ Project Identification No.: _____________ To: [name And Address Of Procuring Entity] Having Examined The Philippine Bidding Documents(pbds) Including The Supplemental Or Bid Bulletin Numbers_____, The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To (supply/deliver/perform) (description Of The Goods) In Conformity With The Said Pbds For The Sum Of (total Bid Amount In Words And Figures) Or The Total Calculated Bid Price, As Evaluated And Corrected For Computational Errors , And Other Bid Modifications In Accordance With The Price Schedules Attached Herewith And Made Part Of This Bid. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To (specify The Applicable Taxes, E.g. (i) Value Added Tax, (ii) Income Tax, (iii) Local Taxes, And (iv) Other Fiscal Levies And Duties), Which Are Itemized Herein Or In The Price Schedules. If Our Bid Is Accepted, We Undertake: A.to Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements Of The Philippine Bidding Documents(pbds); B. To Provide A Performance Security In The Form, Amounts, And Within The Times Prescribed In The Pbds; C. To Abide By The Bid Validity Specified In The Pbds And It Shall Remain Binding Upon Us At Any Time Before The Expiration Of That Period. Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/conform That We Comply With The Eligibility Requirements Pursuant To The Pbds. The Undersigned Is Authorized To Submit The Bid On Behalf Of (name Of The Bidder) As Evidenced By The Attached (state The Written Authority). We Acknowledge That Failure To Sugn Each And Every Page Of This Bid Form, Including, The Attached Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Name: Legal Capacity: Signed: Duly Authorized To Sign The Bid For And On Behalf Of: Date: ___________ Contract Agreement For The Procurement Of Goods(revised) __________________________________________________________________________ This Agreement, Made The _________ Day Of _______________, ________ Between [name And Address Of Procuring Entity] Of The Philippines (hereinafter Called The“entity”) Of The One Part And [name Of Supplier] (hereinafter Called The “supplier”) Of The Other Part. Whereas, The Entity Invited Bids For Certain Goods And Ancillary Services, Particularly (brief Description Of Goods And Services) And Has Accepted A Bid By The Supplier For The Supply Of Those Goods And Services In The Sum Of (contract Price In Words And Figures In Specified Currency) (hereinafter Called The “contract Price”). Now This Agreement Witnesseth As Follows: 1. In This Agreement, Words And Expressions Shall Have The Same Meanings As Are Respectively Assigned To Them In The Conditions Of Contract Hereinafter Referred To. 2. The Following Documents As Required By The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 Shall Be Deemed To Form And Be Read And Construed As Part Of This Agreement, Viz.: I. Philippine Bidding Documents(pbds) I. Schedule Of Requirements; Ii.technical Specifications; Iii.bill Of Quantities Iv.general And Special Conditions Of Contract; V.supplemental Or Bid Bulletins, If Any Ii. Winning Bidder’s Bid, Including The Eligibility Requirements, Technical And Financial Proposals, And All Other Documents Or Statements Submitted; Bid Form, Including All The Documents/statements Submitted; Bid Form, Including All The Documents/statements Contained In The Bidder’s Bidding Envelopes, As Annexes, And All Other Documents Submitted(e.g., Bidder’s Response To Request For Clarifications On The Bid), Including Corrections To The Bid, If Any, Resulting From The Procuring Entity’s Bid Evaluation; C. Performance Security D. Notice Of Award Of Contract And The Bidder’s Conforme Thereto; And E. Other Contract Documents That May Be Required By Existing Laws And/or The Procuring Entity Concerned In The Pbds. Winning Bidder Agrees That Additional Contract Documents Or Information Prescribed By The Gppb That Are Subsequently Required For Submission After The Contract Execution, Such As The Notice To Proceed, Variation Orders And Warranty Security, Shall Likewise Form Part Of The Contract. 3. In Consideration For The Sum Of [total Contract Price In Words And Figures) Or Such Other Sums As May Be Ascertained, [name Of Bidder] Agrees To Execute The [state The Object Of The Contract] In Accordance With His/her/its Bid. 4. The [name Of The Procuring Entity] To Pay The Above-mentioned Sum In Accordance With The Terms Of Bidding. In Witness, Whereof The Parties Thereto Have Caused This Agreement To Be Executed The Day And Year First Before Written. Binding Signature Of The Procuring Entity: Binding Signature Of Supplier: Insert Name And Signature] [insert Name And Signature] [insert Signatory’s Legal Capacity] [insert Signatory’s Legal Capacity] Signed In The Presence Of: ______________________ ________________ Lorenzo G. Ubalde Liaison Officer For: For: [insert Procuring Entity] [insert Name Of Supplier] Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. ______________ Page No: ______________ Book No. ______________ Series Of 2024. Bill Of Quantities Item No. Item Quantity Unit Unit Price Total Price Prepared By: ______________ Proprietor Technical Specifications Item No. Item Statement Of Compliance (comply/not Comply) Prepared By: ______________ Proprietor

Details: Description Quantity Unit Articles 3 Pieces 21st Century Basic Management With Sanitation Author: Dela Cruz Publisher: Eesm Bookstore Year: 2023 2 Pieces National Service Training Program Author: Punzalan Publisher: Eesm Bookstore Year: 2023 5 Pieces Practical Research I Author: Maranan Publisher: Eesm Bookstore Year: 2023 3 Pieces Philippine Politics And Governance With 1987 Philippine Constitution Author: Sanchez Publisher: Eesm Bookstore Year: 2023 5 Pieces E-governance For Development Administration Author: Abante Publisher: Eesm Bookstore Year: 2024 5 Pieces Unraveling The Absolute Moral Principle: Ethics For College Students Author: Buenaflor Publisher: Eesm Bookstore Year: 2024 2 Pieces An Eye For Art Appreciation: Preception Author: Sonsona Publisher: Eesm Bookstore Year: 2024 3 Pieces Values Education Legal And Ethical Perspective Author: Peñaflor Publisher: Eesm Bookstore Year: 2023 2 Pieces Ethics Author: Bacolod Publisher: Eesm Bookstore Year: 2023 3 Pieces Training And Development 2nd Edition Author: Flores Publisher: Eesm Bookstore Year: 2023 4 Pieces The Art Of Self Discovery: An Understanding The Self Author: Villanueva Publisher: Eesm Bookstore Year: 2023 5 Pieces Advanced Human Behavior: Organization With Ethics Author: Abante Publisher: Eesm Bookstore Year: 2024 2 Pieces Advanced Human Resource Management Author: Abante Publisher: Eesm Bookstore Year: 2024 4 Pieces Understanding The Self Developing Life Skills Author: Magalona Publisher: Eesm Bookstore Year: 2023 2 Pieces System Integration And Architecture I Author: Villegas Publisher: Eesm Bookstore Year: 2024 2 Pieces System Integration And Enterprise Architecture 2 Author: Abante Publisher: Eesm Bookstore Year: 2024 3 Pieces Passion To Bake: Baking Guide For Beginners Author: Gabriel Publisher: Eesm Bookstore Year: 2023 4 Pieces Gender And Society Author: Bacolod Publisher: Eesm Bookstore Year: 2024 2 Pieces Personal Development 4th Edition Author: 3g Publisher: Eesm Bookstore Year: 2023 3 Pieces Cake Decorating Techniques Author: 3g Publisher: Eesm Bookstore Year: 2024 5 Pieces Advanced Local Government And Regional Author: Abante Publisher: Eesm Bookstore Year: 2024 2 Pieces Nstp I Guide In Civic Welfare Author: Loñez Publisher: Eesm Bookstore Year: 2023 5 Pieces Fundamentals Of Accounting Ii Author: Arriola Publisher: Eesm Bookstore Year: 2024 5 Pieces Fundamentals Of Accounting I Author: Arriola Publisher: Eesm Bookstore Year: 2024 2 Pieces Advanced Management Information System Author: Abante Publisher: Eesm Bookstore Year: 2023 3 Pieces Financial Markets Author: Bairan Publisher: Eesm Bookstore Year: 2024 5 Pieces Fundamentals Of Accounting Volume 2 Author: Empleo Publisher: Eesm Bookstore Year: 2022 1 Pieces Introduction To Probability And Statistics Author: Sirog Publisher: Eesm Bookstore Year: 2024 1 Pieces Purposive Communication In The Now Author: Africa Publisher: Eesm Bookstore Year: 2022 1 Pieces Key Concepts In Tourism Author: Raga Publisher: Eesm Bookstore Year: 2023 1 Pieces Current Progress In Artifical Intelligence Author: Madison Publisher: Eesm Bookstore Year: 2023 1 Pieces Ethical Hacking Workshop Author: Pillay Publisher: Eesm Bookstore Year: 2023 1 Pieces Python For Security And Networking Author: Ortega Publisher: Eesm Bookstore Year: 2023 1 Pieces Flutter Cookbook 2nd Edition Author: Alessandria Publisher: Eesm Bookstore Year: 2023 1 Pieces Mastering Python Networking 4th Edition Author: Chou Publisher: Eesm Bookstore Year: 2023 1 Pieces The Global Challenge Author: Pucik Publisher: Eesm Bookstore Year: 2017 1 Pieces Human Resource Management Author: Policario Publisher: Eesm Bookstore Year: 2024 1 Pieces Just Teaching Author: Ekert Publisher: Eesm Bookstore Year: 2023 1 Pieces Quality Service Management In Tourism Author: Arenas Publisher: Eesm Bookstore Year: 2022 1 Pieces Foreign Language (french And Japanese) Author: Aquino Publisher: Eesm Bookstore Year: 2022 1 Pieces Introduction To Tailoring Author: 3g Publisher: Eesm Bookstore Year: 2023 1 Pieces Basic Knowledge Of Room Service Author: 3g Publisher: Eesm Bookstore Year: 2024 2 Pieces Introduction To Hotel Management Author: Juyal Publisher: Eesm Bookstore Year: 2024 1 Pieces Housekeeping Management Author: Juyal Publisher: Eesm Bookstore Year: 2024 1 Pieces The Bar And Beverage Handbook Author: 3g Publisher: Eesm Bookstore Year: 2023 1 Pieces Oral Communication 4th Editon Author: 3g Publisher: Eesm Bookstore Year: 2023 1 Pieces Principles Of Restaurant Supervision Author: 3g Publisher: Eesm Bookstore Year: 2024 1 Pieces Decision Making Author: 3g Publisher: Eesm Bookstore Year: 2024 1 Pieces Accounting Information Systems Author: 3g Publisher: Eesm Bookstore Year: 2024 1 Pieces Managerial Accounting Author: Warren Publisher: Eesm Bookstore Year: 2023 1 Pieces The Complete Human Body Author: Roberts Publisher: Eesm Bookstore Year: 2023 2 Pieces Physical Activity Towards Health And Fitness I (pathfit I) Author: Punzalan Publisher: Eesm Bookstore Year: 2023 2 Pieces Physical Activity Towards Health And Fitness Iv (pathfit Iv) Author: Punzalan Publisher: Eesm Bookstore Year: 2024 2 Pieces Physical Activity Towards Health And Fitness Ii (pathfit Ii) Author: Punzalan Publisher: Eesm Bookstore Year: 2023 3 Pieces Readings In Philippine History Author: Bacolod Publisher: Eesm Bookstore Year: 2023 4 Pieces Introduction To Discrete Mathematics Author: Sirug Publisher: Eesm Bookstore Year: 2023 2 Pieces Introduction To Research Author: Sergote Publisher: Eesm Bookstore Year: 2024 1 Pieces Understanding Research Design And Methods Author: Siniguian Publisher: Eesm Bookstore Year: 2023 1 Pieces Between Worlds Author: Freeman Publisher: Eesm Bookstore Year: 2021 1 Pieces A Handbook Of Sports Chronobiology Author: Jain Publisher: Eesm Bookstore Year: 2023 1 Pieces Growth Patterns And Sports Performance Author: Russel Publisher: Eesm Bookstore Year: 2023 1 Pieces Test And Measurements In Physical Education Author: Kumar Publisher: Eesm Bookstore Year: 2023 1 Pieces Intramural Sports Author: Yogesh Publisher: Eesm Bookstore Year: 2023 1 Pieces Kinesiology In Sports Author: Mishna Publisher: Eesm Bookstore Year: 2023 1 Pieces Long-term Athlete Development Author: 3g Publisher: Eesm Bookstore Year: 2022 1 Pieces Essentials Of Youth Fitness Author: 3g Publisher: Eesm Bookstore Year: 2022 1 Pieces Weightlifting: The Complete Guide To Training Author: 3g Publisher: Eesm Bookstore Year: 2022 1 Pieces High-performance Training For Sports Author: 3g Publisher: Eesm Bookstore Year: 2022 1 Pieces Information Assurance And Security Book I Author: Pomperada Publisher: Eesm Bookstore Year: 2023 1 Pieces Information Assurance And Security Book Ii Author: Pomperada Publisher: Eesm Bookstore Year: 2023 1 Pieces Introduction To Human Computer Interaction Author: Revano Publisher: Eesm Bookstore Year: 2023 1 Pieces Introduction To Information Technology Author: Kumar Publisher: Eesm Bookstore Year: 2024 1 Pieces Accounting For Business Combination 2 Author: Millan Publisher: Eesm Bookstore Year: 2023 1 Pieces Accounting For Special Transactions I Author: Millan Publisher: Eesm Bookstore Year: 2023 1 Pieces Cpa Examinations Reviewers: Auditing Practice Author: Roque Publisher: Eesm Bookstore Year: 2023-2024 1 Pieces Intermediate Accounting 1b/1a Author: Millan Publisher: Eesm Bookstore Year: 2024 1 Pieces Intermediate Accounting 2024 Volume 2 Author: Valix Publisher: Eesm Bookstore Year: 2024 1 Pieces The Life And Works Of Rizal Author: Balili Publisher: Eesm Bookstore Year: 2023 1 Pieces Strategic Management And Leadership Author: Perida Publisher: Eesm Bookstore Year: 2024 1 Pieces Assessment Of Learning I Author: Mañas Publisher: Eesm Bookstore Year: 2024 1 Pieces Events Management 2nd Edition Author: Dela Cruz Publisher: Eesm Bookstore Year: 2024 5 Pieces Practical Auditing Author: Empleo Publisher: Eesm Bookstore Year: 2024 1 Pieces Teaching And Assessment Of Grammar Author: Mañas Publisher: Eesm Bookstore Year: 2024 1 Pieces Fighting Fake News Author: Wilhelm Publisher: Eesm Bookstore Year: 2023 1 Pieces Digital Electronics And Computerb Architecture Author: Deck Publisher: Eesm Bookstore Year: 2023 1 Pieces Network Access Layer Author: Bhardwaj Publisher: Eesm Bookstore Year: 2023 2 Pieces Essentials Of Purposive Communication Author: Caudilla Publisher: Eesm Bookstore Year: 2023 2 Pieces Purposive Communication 3rd Edition Author: 3g Publisher: Eesm Bookstore Year: 2023 1 Pieces International Business Management Author: Lagare Publisher: Eesm Bookstore Year: 2024 1 Pieces Introduction To Application Development Author: Pomperada Publisher: Eesm Bookstore Year: 2023 1 Pieces Computer Networking Author: Qaiser Publisher: Eesm Bookstore Year: 2024 1 Pieces The Cq Press Writing Guide For Public Policy Author: Pennock Publisher: Eesm Bookstore Year: 2023 1 Pieces The Ravaged World Author: Reyes Publisher: Eesm Bookstore Year: 2023 1 Pieces The Lost Bookshop Author: Woods Publisher: Eesm Bookstore Year: 2023 1 Pieces The Midnight Library Author: Haig Publisher: Eesm Bookstore Year: 2023 1 Pieces At The River Author: Elliot Publisher: Eesm Bookstore Year: 2024 1 Pieces Lost Graves Found Lives Author: Del Rosario Publisher: Eesm Bookstore Year: 2022 1 Pieces Mandarin I Reprint Author: Morillo Publisher: Eesm Bookstore Year: 2024 1 Pieces Oral Communication In Context Author: Jose Publisher: Eesm Bookstore Year: 2023 1 Pieces Practicum Manual For Tourism Author: Taoing Publisher: Eesm Bookstore Year: 2023 1 Pieces Culinary Nutrition The Science Author: Natad Publisher: Eesm Bookstore Year: 2023 1 Pieces Sustainable Tourism Author: Santos Publisher: Eesm Bookstore Year: 2023 1 Pieces Foundations Of Operations Management Author: Perida Publisher: Eesm Bookstore Year: 2024 1 Pieces Kitchen Essentials And Basic Food Preparation Author: Ramaneses Publisher: Eesm Bookstore Year: 2023 1 Pieces Practical Research Ii Author: Maranan Publisher: Eesm Bookstore Year: 2023 1 Pieces Quantity Cookery And Catering Management Author: Parades Publisher: Eesm Bookstore Year: 2023 1 Pieces English For Purposive Communication Author: Ang Publisher: Eesm Bookstore Year: 2023 1 Pieces Mastering Pricing And Costing Author: Pasahol Publisher: Eesm Bookstore Year: 2024 1 Pieces English Proficiency For Empowered Author: Santillana Publisher: Eesm Bookstore Year: 2023 1 Pieces 21st Century Risk Management With Sanitation Author: Dela Cruz Publisher: Eesm Bookstore Year: 2024 1 Pieces Front Office System And Procedures Author: Lago Publisher: Eesm Bookstore Year: 2024 1 Pieces Mathematics In The Modern World 2nd Edition Author: Reyes Publisher: Eesm Bookstore Year: 2023 1 Pieces The Life And Works Of Jose Rizal Author: Sanchez Publisher: Eesm Bookstore Year: 2024 1 Pieces Strategic Operations Management 2nd Edition Author: Camilar Publisher: Eesm Bookstore Year: 2024 1 Pieces Income And Business Taxation Author: N/a Publisher: Eesm Bookstore Year: 2024 1 Pieces Principles Of Total Quality Management Author: Pasahol Publisher: Eesm Bookstore Year: 2024 1 Pieces Human Resource Management Author: Pereda Publisher: Eesm Bookstore Year: 2020 1 Pieces Fundamentals Of Accounting Author: Souad Publisher: Eesm Bookstore Year: 2024 1 Pieces Principles Of Marketing Author: Policario Publisher: Eesm Bookstore Year: 2024 1 Pieces Hospitality Financial Management Author: Adebajo Publisher: Eesm Bookstore Year: 2024 1 Pieces Marketing And Managing Tourism Destinations 2nd Edition Author: 3g Publisher: Eesm Bookstore Year: 2024 1 Pieces Front Office Management Author: Cajiao Publisher: Eesm Bookstore Year: 2024 1 Pieces Basic Knowledge Of Front Office Management Author: 3g Publisher: Eesm Bookstore Year: 2024 1 Pieces Facilitating Adult And Organizational Learning Through Andragogy: A History, Philosophy, And Major Themes Author: Henschke Publisher: Eesm Bookstore Year: 2020 5 Pieces Advanced Human Behavior Organization With Ethics Author: Abante, Et. Al Publisher: Unlimited Books Library Services & Publishing Inc. Year: 2024 3 Pieces Advance Human Resource Management Author: Abante, Et. Al Publisher: Unlimited Books Library Services & Publishing Inc. Year: 2024 2 Pieces Corporate Social Responsibility, Good Governance, And Environmental Accountability Author: Garcia, Et. Al Publisher: Unlimited Books Library Services & Publishing Inc. Year: 2025 3 Pieces Advance Theory And Practice In Public Administration Author: Abante, Et. Al Publisher: Unlimited Books Library Services & Publishing Inc. Year: 2024 2 Pieces Workbook In Customs Laws Author: Garcua, Et. Al Publisher: Unlimited Books Library Services & Publishing Inc. Year: 2024 5 Pieces Environmental Management: Concepts, Principles, And Practices With Introduction To Philippine Eis System Author: Mendoza, Et. Al Publisher: Unlimited Books Library Services & Publishing Inc. Year: 2018 3 Pieces E-governance For Development Administration Author: Abante, Et. Al Publisher: Unlimited Books Library Services & Publishing Inc. Year: 2024 4 Pieces Advanced Organizational Management Author: Abante, Et. Al Publisher: Unlimited Books Library Services & Publishing Inc. Year: 2024 5 Pieces Advanced Public Fiscal Management, Finance And Accountability Author: Abante, Et. Al Publisher: Unlimited Books Library Services & Publishing Inc. Year: 2024 1 Pieces Modern Mandarin Chinese Grammar Author: Claudia Ross, Et. Al Publisher: Routledge Year: 2024 1 Pieces How To Do Critical Discourse Analysis Author: Machin, Et. Al Publisher: Sage Year: 2023 1 Pieces A Visual Reference To Food Styling Author: Aleksandar Mratinkovic Publisher: 3g E-learning Year: 2020 1 Pieces Introduction To Linguistics Author: Harrison Fletcher Publisher: Alexis Press Year: 2024 5 Pieces The Hospitality Industry An Introduction Author: Cariño, Et. Al Publisher: Mindshapers Co., Inc. Year: 2013 1 Pieces Culinary Nutrition The Science And Art Of Healthy Cooking Author: Maria Felisa T. Natad Publisher: Mindshapers Co., Inc. Year: 2023 1 Pieces Practicum Manual For Tourism And Hospitality Management Author: Taoing, Et. Al Publisher: Mindshapers Co., Inc. Year: 2023 1 Pieces Events Management Author: Bernardo B. Rodolfa Jr. Publisher: Mindshapers Co., Inc. Year: 2022 5 Pieces Baking And Pastry Arts Author: Javier-reyes, Et. Al Publisher: Mindshapers Co., Inc. Year: 2018 1 Pieces Practicum Training Record Book For Hospitality Management Author: Bajao, Et. Al Publisher: Wiseman's Books Trading, Inc. Year: 2020 1 Pieces Fundamentals Of Lodging Operations With Housekeeping Laboratory Manual Author: Bajao, Et. Al Publisher: Wiseman's Books Trading, Inc. Year: 2023 1 Pieces Bar Beverage Management A Book On Drinks Author: Bajao, Et. Al Publisher: Wiseman's Books Trading, Inc. Year: 2023 1 Pieces Catering Management Author: Bajao, Et. Al Publisher: Wiseman's Books Trading, Inc. Year: 2019 1 Pieces Strategic Management Author: Rothaermel Publisher: Mcgraw Hill Year: 2024 1 Pieces Strategic Management Creating Competitive Advantages Author: Dess, Et. Al Publisher: Mcgraw Hill Year: 2024 1 Pieces Operations And Supply Chain Management The Core Author: Jacobs, Et. Al Publisher: Mcgraw Hill Year: 2023 3 Pieces A Course Module For Child And Adolescent Learners And Learning Principles Author: Mingoa, Et. Al Publisher: Rex Book Store, Inc. Year: 2031 3 Pieces Assessment In Learning 1 Author: Balagtas, Et. Al Publisher: Rex Book Store, Inc. Year: 2020 3 Pieces Assessment In Learning 2 Author: Balagtas, Et. Al Publisher: Rex Book Store, Inc. Year: 2020 3 Pieces Building And Enhancing New Literacies Across The Curriculum Author: Alata, Et. Al Publisher: Rex Book Store, Inc. Year: 2019 3 Pieces Learners With Emotional, Behavioral, Language, And Communication Disabilities Author: Salcedo-padilla Publisher: Rex Book Store, Inc. Year: 2024 3 Pieces The Teacher And The School Curriculum Author: Pawilen Publisher: Rex Book Store, Inc. Year: 2019 3 Pieces Foundations Of Special And Inclusive Education Author: Aligada-halal, Et. Al Publisher: Rex Book Store, Inc. Year: 2020 3 Pieces Facilitating Learner-centered Teaching Author: Tabbada-rungduin, Et. Al Publisher: Rex Book Store, Inc. Year: 2021 3 Pieces Technology For Teaching And Learning 1 Author: Ballado, Et. Al Publisher: Rex Book Store, Inc. Year: 2023 1 Pieces Being Ethnographic Author: Raymond Madden Publisher: Sage Year: 2023 1 Pieces Generalist Social Work Practice Author: Janice Gasker Publisher: Sage Year: 2023 1 Pieces Supervision Concepts And Practices Of Management Author: Leonard, Et. Al Publisher: Cengage Learning, Inc. Year: 2025 1 Pieces Earth's Natural Hazards And Disasters Author: Isaac Andrews Publisher: Syrawood Publishing House Year: 2022 1 Pieces Assessment, Risk & Decision Making In Social Work Author: Killick, Et. Al Publisher: Learning Matters Year: 2024 1 Pieces Anti-oppresive Social Work Practice Author: Prospera Tedam Publisher: Learning Matters Year: 2024 1 Pieces Essentials Of Business Statistics Author: Jaggia, Et. Al Publisher: Mcgraw Hill Year: 2024 1 Pieces Negotiation Author: Lewicki, Et. Al Publisher: Mcgraw Hill Year: 2024 1 Pieces Productivity And Quality Management Author: Camilar-serrano Publisher: Unlimited Books Library Services & Publishing Inc. Year: 2023 1 Pieces Strategic Management Of Technological Innovation Author: Melissa A. Schilling Publisher: Mcgraw Hill Year: 2023 1 Pieces Business And Society Stakeholders, Ethics Public Plocy Author: Lawrence, Et. Al Publisher: Mcgraw Hill Year: 2023 5 Pieces Filipino Leadership Author: Teng-celleja, Et. Al Publisher: Ateneo De Manila University Press Year: 2021 1 Pieces Brief Case Jurisprudential Doctrines For Bar 2022 Author: Buenaventura Publisher: Central Book Supply, Inc. Year: 2022 1 Pieces The Dynasty Problem In The Philippines Author: Montemayor Publisher: Central Book Supply, Inc. Year: 2022 4 Pieces Advanced Leadership Effectiveness And Business Ethics Author: Abante, Et. Al Publisher: Unlimited Books Library Services & Publishing Inc. Year: 2024 5 Pieces Advanced Local Government And Regional Administration Development Author: Abante, Et. Al Publisher: Unlimited Books Library Services & Publishing Inc. Year: 2024 3 Pieces Code Of Ethics Of Professional Teachers Author: Estrada Publisher: Rex Book Store, Inc. Year: 2023 1 Pieces Practical Next.js For E-commerce Author: Libby Publisher: Apress Year: 2023 1 Pieces Readings From Programming With Python Author: Mcmullen, Et. Al Publisher: Cengage Learning, Inc. Year: 2023 1 Pieces Advanced Guide To Python 3 Programming Author: John Hunt Publisher: Springer Nature Switzerland Year: 2023 1 Pieces Information Systems Research Foundations, Design And Theory Author: Mohammed Ali Publisher: Springer Nature Switzerland Year: 2023 1 Pieces Web Api Development For The Absolute Beginner Author: Irina Dominte Publisher: Apress Year: 2023 1 Pieces Essentials Of Python For Artificial Intelligence And Machine Learning Author: Gupta, Et. Al Publisher: Springer Nature Switzerland Year: 2024 1 Pieces Valuation Concepts And Methodologies Author: Lascano, Et. Al Publisher: N/a Year: 2021 3 Pieces Practical Auditing Author: Empleo Publisher: Pme Publishing Corporation Year: 2024 3 Pieces Accounting For Special Transactions A Comprehensive Approach Author: Rante, Et. Al Publisher: Millenium Books, Inc. Year: 2020 5 Pieces Income Taxation Laws, Principles And Application Author: Rex B. Banggawan Publisher: Real Excellence Publishing Inc. Year: 2023-2024 3 Pieces Government Accounting Author: Punzalan, Et. Al Publisher: Gic Enterprises & Co., Inc. Year: 2022 1 Pieces Comprehensive Accounting Reviewer Series Vol. 1a : Financial Accounting And Reporting Theories And Problems Author: Villaluz, Et. Al Publisher: Bcv Accounting Bookshop Year: 2023 1 Pieces Comprehensive Accounting Reviewer Series Vol. 1b : Financial Accounting And Reporting Theories And Problems Author: Villaluz, Et. Al Publisher: Bcv Accounting Bookshop Year: 2023 4 Pieces Intermediate Accounting 1 Part 1 Author: Vhinson Jay Garcia Publisher: Real Excellence Publishing Inc. Year: 2023-2024 4 Pieces Intermediate Accounting 1 Part 2 Author: Vhinson Jay Garcia Publisher: Real Excellence Publishing Inc. Year: 2023-2024 4 Pieces Intermediate Accounting 2 Author: Vhinson Jay Garcia Publisher: Real Excellence Publishing Inc. Year: 2023-2024 4 Pieces Intermediate Accounting 3 Author: Vhinson Jay Garcia Publisher: Real Excellence Publishing Inc. Year: 2023-2024 7 Pieces Auditing And Assurance Part 2 Author: Asuncion, Et. Al Publisher: Real Excellence Publishing Inc. Year: 2023-2024 7 Pieces Auditing And Assurance Part 1 Author: Asuncion, Et. Al Publisher: Real Excellence Publishing Inc. Year: 2023-2024 1 Pieces Labor Juris Author: Demosthenes B. Donato Publisher: Central Book Supply, Inc. Year: 2015 1 Pieces Take Note: Commercial Law Series Author: Villanueva-castro Publisher: Central Book Supply, Inc. Year: 2016 1 Pieces Transportation Law And Jurisprudence Author: Claridades Publisher: Central Book Supply, Inc. Year: 2016 1 Pieces The Politics Of Petroleum Prices Author: Montemayor Publisher: Central Book Supply, Inc. Year: 2022 2 Pieces Policy ( Definition And Its Concept ) Author: Montemayor Publisher: Central Book Supply, Inc. Year: 2022 1 Pieces A History Of The Philippines Author: Samuel K. Tan Publisher: University Of The Philippines Press Year: 2023 1 Pieces Social Work Education And The Grand Challenges Author: Maiden, Et. Al Publisher: Routledge Year: 2023 3 Pieces Marriage And Family Author: Augustin Publisher: Paulist Press Year: 2015 1 Pieces Essential Managers Management Handbook Author: Dunford, Et. Al Publisher: Dorling Kindersley Limited Year: 2022 1 Pieces Economics: An Essential Guide To How The Economy Works Author: Schwartz Publisher: Arcturus Publishing Limited Year: 2024 5 Pieces Management Services Author: Agamata Publisher: Gic Enterprises & Co., Inc. Year: 2021 4 Pieces Introduction To Public Administration Author: Bihasa Publisher: Books Atbp. Publishing Corp. Year: 2022 5 Pieces Afar Quick Notes Author: Bagayao Publisher: Lajara Printing Year: 2024 5 Pieces Philippine Income Tax Part 1 Author: Llamado, Et. Al Publisher: Gic Enterprises & Co., Inc. Year: 2023 5 Pieces Philippine Income Tax Part 2 Author: Llamado, Et. Al Publisher: Gic Enterprises & Co., Inc. Year: 2023 3 Pieces Financial Management Author: Bagayao, Et. Al Publisher: Real Excellence Publishing Inc. Year: 2023-2024 7 Pieces Comprehensive Reviewer In Advanced Financial Accounting And Reporting Author: German, Et. Al Publisher: Pme Publishing Co. Year: 2025 5 Pieces Theory Financial Accounting Author: Valix, Et. Al Publisher: Gic Enterprises & Co., Inc. Year: 2024 5 Pieces Conceptual Framework And Accounting Standards Author: Valix, Et. Al Publisher: Gic Enterprises & Co., Inc. Year: 2024 5 Pieces Practical Financial Accounting Author: Valix, Et. Al Publisher: Gic Enterprises & Co., Inc. Year: 2023 5 Pieces Intermediate Accounting Vol. 3 Author: Valix, Et. Al Publisher: Gic Enterprises & Co., Inc. Year: 2024 *****end*****

Details: The Finnish Transport and Communications Agency Traficom has the objective of establishing a dynamic purchasing system (dps) targeted by expert services for smart transport,maion and mobility services. “Acquisn of Expert Services may be Cusen and Intelligent Transportation Services, and Other Intelligence, Road Automation, Road Management and Technologies for Development and Implementation of National and International Tasks, As:” • From the Quality of Applications for Eu Projects or Financial Programs, and Change Reporting • From the National, Emerging and Implementation” Preparation of meetings and occasions » • Producing information and findings » Support for authorities in Technical and Legal Questions,'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s mandates may be Determinate Projects or Long-term Service Purchases for Either Traficom or the Transport Agency's Impactive. As a rule, execution of assignments requires scientific, technical or research skills. Assignments should usually be reviewed by the report and the report Introduction Ma Jol Either Finnish or English.”, “The mandates are usually €15,000 to €70,000 and the mandates are $10-20 per year. “All the data presented in this Prior Information Notice are Preliminary and Preliminary Information. Preliminary notice does not link the Purchase Entity to any Solution. """

Details: The Finnish Transport and Communications Agency Traficom has the objective of establishing a dynamic purchasing system (dps) targeted by expert services for smart transport,maion and mobility services. “Acquisn of Expert Services may be Cusen and Intelligent Transportation Services, and Other Intelligence, Road Automation, Road Management and Technologies for Development and Implementation of National and International Tasks, As:” • From the Quality of Applications for Eu Projects or Financial Programs, and Change Reporting • From the National, Emerging and Implementation” Preparation of meetings and occasions » • Producing information and findings » Support for authorities in Technical and Legal Questions,'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s mandates may be Determinate Projects or Long-term Service Purchases for Either Traficom or the Transport Agency's Impactive. As a rule, execution of assignments requires scientific, technical or research skills. Assignments should usually be reviewed by the report and the report Introduction Ma Jol Either Finnish or English.”, “The mandates are usually €15,000 to €70,000 and the mandates are $10-20 per year. “All the data presented in this Prior Information Notice are Preliminary and Preliminary Information. Preliminary notice does not link the Purchase Entity to any Solution. """

Details: Description Republic Of The Philippines Province Of Sorsogon Municipality Of Irosin Bids & Awards Committee Invitation To Bid For Supply & Delivery Of Hardware/materials For The Improvement Of Various Barangay Water System 1. The Local Government Unit Of Irosin, Through The 20% Edf Intends To Apply The Sum Of One Million Two Hundred Twenty Seven Thousand One Hundred Seventy Three Pesos (p 1,227,173.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Supply & Delivery Of Hardware/materials For The Improvement Of Various Barangay Water System, Good-40-2024. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Name Of Contract : Supply & Delivery Of Hardware/materials For The Improvement Of Various Barangay Water System Brief Description: 168bags Portland Cement/ 155.5 Cu.m. Sand/ 19.5cu.m. Peasize/ 1cu.m. Gravel/ 2cu.m. Boulderette/ 5sacks Charcoal (wood)/ 1pc Mosquito Net/ 151packs Sahara/ 174pcs 12mm Rsb/ 21pcs 10mm Rsb/ 4pcs 8mm Rsb/ 16pcs 1-1/2” G.i. Pipe, S-40/ 18pcs 10mm Plain Bar/6rolls 2” Cyclone Wire, 5ft./ 5kgs Welding Rod/ 23kgs #16 Tie Wire/4pcs Cut-off Blade, 14” Diam/ 7pcs 4” Cutting Disc/4pcs Sandflex Blade/ 1gal Epoxy Primer/ 1pc 4” Roller Paint W/ Pan/2pcs 2” Paint Brush/60l.m. 3” Diam. P.e. Pipe, Sdr 11/ 120l.m. 2-1/2” P.e. Pipe Sdr 11/ 900l.m. 2” Diam P.e. Pipe, Sdr 11/ 1410l.m. 1-1/2” Diam. P.e. Pipe, Sdr 11/ 1500l.m. 1” Diam. P.e. Pipe, Sdr 11/ 600l.m. Diam. P.e. Pipe, Sdr 11/600l.m. ½” Diam. P.e. Pipe, Sdr 11/ 1pc 4” X 2-1/2” Wye Reducer/ 1pc 1” Diam. Wye/ 1pc 2-1/2” Diam. P.e. Elbow, 90deg./ 2pcs 2-1/2” Diam. P.e. Elbow, 45deg./ 3pcs 2-1/2” X 2” Coupling Reducer/ 3pcs 2” X 1-1/2” Coupling Reducer/ 1pc 1-1/2” X 1” Coupling Reducer/ 1pc 2-1/2” Diam. Coupling/ 5pcs 2” Diam. Coupling/ 5pcs 1-1/2” Diam. Coupling/ 1pc 2-1/2” X 1-1/2” Wye Reducer/ 2pcs 2-1/2” X 2” Wye Reducer/ 1pc 1” Diam. End Cap/ 8pcs 6” X ½” Diam. G.i. Nipple, S-40/8pcs ½” Diam. G.i. Coupling, S-40/ 16pcs ½” Diam. G.i. Elbow, S-40/ 16pcs Teplon Tape/ 9pcs ½” Diam. Plastic Faucet/ 2pcs 3” Diam. Gate Valve/ 1pc 2-1/2” Gate Valve/ 5pcs 2” Diam. Gate Valve/ 3pcs 1-1/2” Diam. Gate Valve/ 1pc ¾” Marine Plywood/ 5pcs ½” Marine Plywood;/ 1pc ½” Phenolic Plywood/ 42pcs ½” Ord. Plywood/ 470bd.ft. 2” X 3” X 12’ Coco-lumber/ 1383bd.ft. 2” X 3” X 10’ Coco-lumber/ 32kgs Assorted Cw Nail Approved Budget For The Contract : P 1,227,173.00 Contract Duration : 30 Calendar Days Delivery Period : 7 Calendar Days After The Issuance Of Notice To Proceed Source Of Fund : 29% Edf 2. The Local Government Unit Of Irosin Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Seven(7) Calendar Days. Bidders Should Have Completed For The Last Two(2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent(60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Priveleges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Local Government Unit Of Irosin And Inspect The Bidding Documents At The Address Given Below From 8:00 Am-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 7, 2024, November 27, 2024 From The Given Address And Philgeps Website And Lgu-irosin Website And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (p 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees By Presenting In Person The Official Receipt Of Bid Documents To The Bac Office. 6. The Local Government Unit Of Irosin Will Hold A Pre-bid Conference On November 14, 2024, 2:00pm At The Conference Room, Office Of The Mayor, Municipal Compound, San Julian, Irosin, Sorsogon. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before November 27, 2024, 8:59 Am At Bac Office, Municipal Compound, San Julian, Irosin, Sorsogon. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On November 27, 2024, 9:00 Am At The Given Address Below Conference Room, Office Of The Mayor, Municipal Compound, San Julian, Irosin, Sorsogon. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Irosin Reserves The Right To Accept Any And All Bids, Declare A Failure Of Bidding Or Not Award A Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations(irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11.for Further Information, Please Refer To: Benjamin M. Gabionza, Ce Municipal Engineer Municipal Compound, San Julian, Irosin, Sorsogon Url: Www.irosin.gov.ph 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website And Www.irosin.gov.ph Date Of Issue: November 7, 2024 _____________________ Noel D. Mercado Ii Bac Chairman Instruction To Bidders 1. Scope Of Bid The Procuring Entity, Local Government Unit Of Irosin Invites Bids For The Supply & Delivery Of Hardware/materials For The Improvement Of Various Barangay Water System, With Project Identification Number Good-40-2024. [note: The Project Identification Number Is Assigned By The Procuring Entity Based On Its Own Coding Scheme And Is Not The Same As The Philgeps Reference Number, Which Is Generated After The Posting Of The Bid Opportunity On The Philgeps Website.] The Procurement Project (referred To Herein As “project”) Is Composed Of 1 Lot Nutribun, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 20% Edf In The Amount Of One Million Two Hundred Twenty Seven Thousand One Hundred Seventy Three Pesos ( P 1,227,173.00). 2.2. The Source Of Funding Is: 20% Edf 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manual And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Invitation To Bid By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Inspected The Site, Determined The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A.foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or B. Foreign Ownership Limited To Those Allowed Under The Rules May Participate In This Project. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No. 9184, The Bidder Shall Have An Slcc That Is At Least One(1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must At Least Equivalent To: A. For The Procurement Of Expandable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.2 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 7.2 Subcontracting Is Not Allowed During The Bidding. 7.3 Subcontracting Is Not Allowed During The Contract Implementation Stage. 7.4 Subcontracting Of Any Portion Of The Project Does Not Relieve The Supplier Of Any Liability Or Obligation Under The Contract. The Supplier Will Be Responsible For The Acts, Defaults, And Negligence Of Any Subcontractor, Its Agents, Servants, Or Workmen As Fully As If These Were The Contractor’s Own Acts, Defaults, Or Negligence, Or Those Of Its Agents, Servants, Or Workmen. 8. Pre-bid Conference The Procuring Entity Will Not Hold A Pre-bid Conference For This Project. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii( Checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicted In Itb Clause 5.3 Should Have Completed Within The Last Two(2) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostile Convention, Only The Translated Documents Shall Be Authenticated Through The Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii( Checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification From Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 3184. 12. Bid Prices 12.1 Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A.for Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw(ex-works,ex-factory,ex-warehouse,ex-showroom, Or Off The Shelf, As Applicable); Ii. The Cost Of All Custom Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other(incidental) Services, If Any, Listed In The Bds. 13. Bid And Payment Currencies 14.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Adopted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreigh Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 14.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos 14. Bid Security 15.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 15.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty(120) Calendar Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission To The Given Website Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 16. Deadline For Submission Of Bids The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 18.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 18.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1 The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 14 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii(technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Option 1- One Project Having Several Items That Shall Be Awarded As One Contract. 20. Post Qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps), And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A.supply & Delivery Of Hardware/materials For The Improvement Of Various Barangay Water System Brief Description: 168bags Portland Cement/ 155.5 Cu.m. Sand/ 19.5cu.m. Peasize/ 1cu.m. Gravel/ 2cu.m. Boulderette/ 5sacks Charcoal (wood)/ 1pc Mosquito Net/ 151packs Sahara/ 174pcs 12mm Rsb/ 21pcs 10mm Rsb/ 4pcs 8mm Rsb/ 16pcs 1-1/2” G.i. Pipe, S-40/ 18pcs 10mm Plain Bar/6rolls 2” Cyclone Wire, 5ft./ 5kgs Welding Rod/ 23kgs #16 Tie Wire/4pcs Cut-off Blade, 14” Diam/ 7pcs 4” Cutting Disc/4pcs Sandflex Blade/ 1gal Epoxy Primer/ 1pc 4” Roller Paint W/ Pan/2pcs 2” Paint Brush/60l.m. 3” Diam. P.e. Pipe, Sdr 11/ 120l.m. 2-1/2” P.e. Pipe Sdr 11/ 900l.m. 2” Diam P.e. Pipe, Sdr 11/ 1410l.m. 1-1/2” Diam. P.e. Pipe, Sdr 11/ 1500l.m. 1” Diam. P.e. Pipe, Sdr 11/ 600l.m. Diam. P.e. Pipe, Sdr 11/600l.m. ½” Diam. P.e. Pipe, Sdr 11/ 1pc 4” X 2-1/2” Wye Reducer/ 1pc 1” Diam. Wye/ 1pc 2-1/2” Diam. P.e. Elbow, 90deg./ 2pcs 2-1/2” Diam. P.e. Elbow, 45deg./ 3pcs 2-1/2” X 2” Coupling Reducer/ 3pcs 2” X 1-1/2” Coupling Reducer/ 1pc 1-1/2” X 1” Coupling Reducer/ 1pc 2-1/2” Diam. Coupling/ 5pcs 2” Diam. Coupling/ 5pcs 1-1/2” Diam. Coupling/ 1pc 2-1/2” X 1-1/2” Wye Reducer/ 2pcs 2-1/2” X 2” Wye Reducer/ 1pc 1” Diam. End Cap/ 8pcs 6” X ½” Diam. G.i. Nipple, S-40/8pcs ½” Diam. G.i. Coupling, S-40/ 16pcs ½” Diam. G.i. Elbow, S-40/ 16pcs Teplon Tape/ 9pcs ½” Diam. Plastic Faucet/ 2pcs 3” Diam. Gate Valve/ 1pc 2-1/2” Gate Valve/ 5pcs 2” Diam. Gate Valve/ 3pcs 1-1/2” Diam. Gate Valve/ 1pc ¾” Marine Plywood/ 5pcs ½” Marine Plywood;/ 1pc ½” Phenolic Plywood/ 42pcs ½” Ord. Plywood/ 470bd.ft. 2” X 3” X 12’ Coco-lumber/ 1383bd.ft. 2” X 3” X 10’ Coco-lumber/ 32kgs Assorted Cw Nail B. Completed Within The Last Two(2) Years From The Date Of The Submission Of Bids 7.1 Not Applicable Since Sub-contracting Is Not Allowed. 12 The Price Of Goods Shall Be Quoted Ddp Lgu-irosin, Irosin, Sorsogon. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration Or Any Of The Following Forms And Amounts: A. [two Percent (2%) Of Abc], If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; B. [five Percent (5%) Of Abc] If Bid Security Is In Surety Bond. 19.3 Hardware/materials 168bags Portland Cement/ 155.5 Cu.m. Sand/ 19.5cu.m. Peasize/ 1cu.m. Gravel/ 2cu.m. Boulderette/ 5sacks Charcoal (wood)/ 1pc Mosquito Net/ 151packs Sahara/ 174pcs 12mm Rsb/ 21pcs 10mm Rsb/ 4pcs 8mm Rsb/ 16pcs 1-1/2” G.i. Pipe, S-40/ 18pcs 10mm Plain Bar/6rolls 2” Cyclone Wire, 5ft./ 5kgs Welding Rod/ 23kgs #16 Tie Wire/4pcs Cut-off Blade, 14” Diam/ 7pcs 4” Cutting Disc/4pcs Sandflex Blade/ 1gal Epoxy Primer/ 1pc 4” Roller Paint W/ Pan/2pcs 2” Paint Brush/60l.m. 3” Diam. P.e. Pipe, Sdr 11/ 120l.m. 2-1/2” P.e. Pipe Sdr 11/ 900l.m. 2” Diam P.e. Pipe, Sdr 11/ 1410l.m. 1-1/2” Diam. P.e. Pipe, Sdr 11/ 1500l.m. 1” Diam. P.e. Pipe, Sdr 11/ 600l.m. Diam. P.e. Pipe, Sdr 11/600l.m. ½” Diam. P.e. Pipe, Sdr 11/ 1pc 4” X 2-1/2” Wye Reducer/ 1pc 1” Diam. Wye/ 1pc 2-1/2” Diam. P.e. Elbow, 90deg./ 2pcs 2-1/2” Diam. P.e. Elbow, 45deg./ 3pcs 2-1/2” X 2” Coupling Reducer/ 3pcs 2” X 1-1/2” Coupling Reducer/ 1pc 1-1/2” X 1” Coupling Reducer/ 1pc 2-1/2” Diam. Coupling/ 5pcs 2” Diam. Coupling/ 5pcs 1-1/2” Diam. Coupling/ 1pc 2-1/2” X 1-1/2” Wye Reducer/ 2pcs 2-1/2” X 2” Wye Reducer/ 1pc 1” Diam. End Cap/ 8pcs 6” X ½” Diam. G.i. Nipple, S-40/8pcs ½” Diam. G.i. Coupling, S-40/ 16pcs ½” Diam. G.i. Elbow, S-40/ 16pcs Teplon Tape/ 9pcs ½” Diam. Plastic Faucet/ 2pcs 3” Diam. Gate Valve/ 1pc 2-1/2” Gate Valve/ 5pcs 2” Diam. Gate Valve/ 3pcs 1-1/2” Diam. Gate Valve/ 1pc ¾” Marine Plywood/ 5pcs ½” Marine Plywood;/ 1pc ½” Phenolic Plywood/ 42pcs ½” Ord. Plywood/ 470bd.ft. 2” X 3” X 12’ Coco-lumber/ 1383bd.ft. 2” X 3” X 10’ Coco-lumber/ 32kgs Assorted Cw Nail 20.2 Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It: Bir Registration 21.2 Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It: None General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract(scc). 2. Advance Payment 2.1 Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2 The Procuring Entity Is Allowed To Determine The Terms Of The Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr. 4. Inspection And Tests The Procuring Entity Or Its Representatives Shall Have The Right To Inspect And/or The Test The Goods To Confirm Their Conformity To The Project. In Addition To Tests In The Scc, Section Vii(technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identify Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 7.1. In Order To Assure The Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 7.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines] “the Delivery Terms Applicable To This Contract Are Delivered [indicate Place Of Destination]. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is Wilson G. Baliwas. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; D. Performance Or Supervision Or Maintenance And/or Repair Of The Supplied Goods, For A Period Of Time Agreed By The Parties, Provided That This Service Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And E. Training Of The Procuring Entity’s Personnel, At The Supplier’s Plant And/or On-site, In Assembly, Start-up, Operation, Maintenance, And/or Repair Of The Supplied Goods. F. No Additional Incidental Service Requirements. The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Spare Parts – The Supplier Is Required To Provide All Of The Following Materials, Notifications, And Information Pertaining To Spare Parts Manufactured Or Distributed By The Supplier: 1. Such Spare Parts As The Procuring Entity May Elect To Purchase From The Supplier, Provided That This Election Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And 2. In The Event Of Termination Of Production Of The Spare Parts: I. Advance Notification To The Procuring Entity Of The Pending Termination, In Sufficient Time To Permit The Procuring Entity To Procure Needed Requirements; And Ii. Following Such Termination, Furnishing At No Cost To The Procuring Entity, The Blueprints, Drawings, And Specifications Of The Spare Parts, If Requested. The Spare Parts And Other Components Required Are Listed In Section Vi (schedule Of Requirements) And The Costs Thereof Are Included In The Contract Price. The Supplier Shall Carry Sufficient Inventories To Assure Ex-stock Supply Of Consumable Spare Parts Or Components For The Goods For A Period Of Three(3) Months. Spare Parts Or Components Shall Be Supplied As Promptly As Possible, But In Any Case, Within Three(3) Months Of Placing The Order. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions Any Relevant Hazchem Classifications A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Intellectual Property Rights – The Supplier Shall Indemnify The Procuring Entity Against All Third-party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 2.2 Partial Payment Is Applicable Provided That Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted. 4 The Inspections And Tests That Will Be Conducted Are: Inspection Of The Hardware/materials If It Follows The Technical Specification Set By The End-user Units. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Portland Cement 168 Bags 2 Sand 15.5 Cu.m 3 Peasize 19.5 Cu.m. 4 Gravel 1 Cu.m. 5 Boulderette 2 Cu.m. 6 Charcoal (wood) 5 Sacks 7 Mosquito Net 1 Pc 8 Sahara 151 Packs 9 12mm Rsb 174 Pcs 10 10mm Rsb 21 Pcs 11 8mm Rsb 4 Pcs 12 1-1/2” G.i. Pipe, S-40 16 Pcs 13 10mm Plain Bar 18 Pcs 14 2” Cyclone Wire, 5ft. 6 Rolls 15 Welding Rod 5 Kgs 16 #16 Tie Wire 23 Kgs 17 Cut-off Blade, 14” Diam. 4 Pcs 18 4” Cutting Disc 7 Pcs 19 Sandflex Blade 4 Pcs 20 Epoxy Primer 1 Gal 21 4” Roller Paint W/ Pan 1 Pcs 22 2” Paint Brush 2 Pcs 23 3” Diam. P.e. Pipe, Sdr 11 60 L.m. 24 2-1/2” P.e. Pipe Sdr 11 120 L.m. 25 2” Diam. P.e. Pipe, Sdr 11 900 L.m. 26 1-1/2” Diam. P.e. Pipe, Sdr 11 1410 L.m. 27 1” Diam. P.e. Pipe, Sdr 11 1500 L.m. 28 ¾” Diam. P.e. Pipe, Sdr 11 600 L.m. 29 ½” Diam. P.e. Pipe, Sdr 11 600 L.m. 30 4” X 1-1/2” Wye Reducer 1 Pc 31 1” Diam. Wye 1 Pc 32 2-1/2” Diam. P.e. Elbow, 90deg. 1 Pc 33 2-1/2” Diam. P.e. Elbow, 45deg. 2 Pcs 34 2-1/2” X 2” Coupling Reducer 3 Pcs 35 2” X 1-1/2” Coupling Reducer 3 Pcs 36 1-1/2” X 1” Coupling Reducer 1 Pc 37 2-1/2” Diam. Coupling 1 Pc 38 2” Diam. Coupling 5 Pcs 39 1-1/2” Diam. Coupling 5 Pcs 40 2-1/2” X 1-1/2” Wye Reducer 1 Pc 41 2-1/2” X 2” Wye Reducer 2 Pcs 42 1” Diam. End Cap 1 Pc 43 6” X ½” Diam. G.i. Nipple, S-40 8 Pcs 44 ½” Diam. G.i. Coupling, S-40 8 Pcs 45 ½” Diam. G.i. Elbow, S-40 16 Pcs 46 Teplon Tape 16 Pcs 47 ½” Diam. Plastic Faucet 9 Pcs 48 3” Diam. Gate Valve 2 Pcs 49 2-1/2” Gate Valve 1 Pc 50 2” Diam. Gate Valve 5 Pcs 51 1-1/2” Diam. Gate Valve 3 Pcs 52 ¾” Marine Plywood 1 Pc 53 ½” Marine Plywood 5 Pcs 54 ½” Phenolic Plywood 1 Pc 55 ½” Ord. Plywood 42 Pcs 56 2” X 3” X 12’ Coco-lumber 470 Bd.ft 57 2” X 3” X 10’ Coco-lumber 1383 Bd.ft. 58 Assorted Cw Nail 32 Kgs Remarks Indicate Here Any Other Appropriate Information As May Be Necessary. Signature Over Printed Name Position Department/division Section Vii. Technical Specifications Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 168 Bags Portland Cement 2 15.5 Cu.m. Sand 3 19.5 Cu.m. Peasize 4 1 Cu.m. Gravel 5 2 Cu.m. Boulderette 6 5 Sacks Charcoal (wood) 7 1 Pc Mosquito Net 8 151 Packs Sahara 9 174 Pcs 12mm Rsb 10 21 Pcs 10mm Rsb 11 4 Pcs 8mm Rsb 12 16 Pcs 1-1/2” G.i. Pipe, S-40 13 18 Pcs 10mm Plain Bar 14 6 Rolls 2” Cyclone Wire, 5ft. 15 5 Kgs Welding Rod 16 23 Kgs #16 Tie Wire 17 4 Pcs Cut-off Blade, 14” Diam. 18 7 Pcs 4” Cutting Disc 19 4 Pcs Sandflex Blade 20 1 Gal Epoxy Primer 21 1 Pc 4” Roller Paint W/ Pan 22 2 Pcs 2” Paint Brush 23 60 L.m. 3” Diam. P.e. Pipe, Sdr 11 24 120 L.m. 2-1/2” P.e. Pipe Sdr 11 25 900 L.m. 2” Diam. P.e. Pipe, Sdr 11 26 1410 L.m. 1-1/2” Diam. P.e. Pipe, Sdr 11 27 1500 L.m. 1” Diam. P.e. Pipe, Sdr 11 28 600 L.m. ¾” Diam. P.e. Pipe, Sdr 11 29 600 L.m. ½” Diam. P.e. Pipe, Sdr 11 30 1 Pc 4” X 1-1/2” Wye Reducer 31 1 Pc 1” Diam. Wye 32 1 Pc 2-1/2” Diam. P.e. Elbow, 90deg. 33 2 Pcs 2-1/2” Diam. P.e. Elbow, 45deg. 34 3 Pcs 2-1/2” X 2” Coupling Reducer 35 3 Pcs 2” X 1-1/2” Coupling Reducer 36 1 Pc 1-1/2” X 1” Coupling Reducer 37 1 Pc 2-1/2” Diam. Coupling 38 5 Pcs 2” Diam. Coupling 39 5 Pcs 1-1/2” Diam. Coupling 40 1 Pc 2-1/2” X 1-1/2” Wye Reducer 41 2 Pcs 2-1/2” X 2” Wye Reducer 42 1 Pc 1” Diam. End Cap 43 8 Pcs 6” X ½” Diam. G.i. Nipple, S-40 44 8 Pcs ½” Diam. G.i. Coupling, S-40 45 16 Pcs ½” Diam. G.i. Elbow, S-40 46 16 Pcs Teplon Tape 47 9 Pcs ½” Diam. Plastic Faucet 48 2 Pcs 3” Diam. Gate Valve 49 1 Pc 2-1/2” Gate Valve 50 5 Pcs 2” Diam. Gate Valve 51 3 Pcs 1-1/2” Diam. Gate Valve 52 1 Pc ¾” Marine Plywood 53 5 Pcs ½” Marine Plywood 54 1 Pc ½” Phenolic Plywood 55 42 Pcs ½” Ord. Plywood 56 470 Bd.ft. 2” X 3” X 12’ Coco-lumber 57 1383 Bd.ft. 2” X 3” X 10’ Coco-lumber 58 32 Kgs Assorted Cw Nail Technical Specifications Technical Specifications Item / Service Maximum Quantity Technical Specifications / Scope Of Work Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution.] Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; (b) Registration From Sec, Department Of Trade And Industry(dti) For Sole Proprietorship And Cda For Cooperatives (c) Valid Mayor’s Permit By The City Or Municipality Where The Principal Place Of Business Is Located (d) Tax Clearance Per Eo 398 Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (d) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (e) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (f) Original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (g) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. (h) Audited Financial Statement Stamped, Received By The Bir Or Its Duly Accredited And Authorized Institutions, For The Immediately Preceding Calendar Year, Showing The Total Assets And Liabilities Which Should Not Be Earlier Than Two(2) Years From The Date Of Bid Submission Class “b” Documents ⬜ (i) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (j) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (k) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (l) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (m) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.   Omnibus Sworn Statement(revised) Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. Select One, Delete The Other: If A Sole Proprietorship: I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. Select One, Delete The Other: If A Sole Proprietorship: As The Owner And Sole Proprietor Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] As Shown In The Attached Duly Notarized Special Power Of Attorney; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g. Duly Notarized Secretary’s Certificate, Board/partnership Resolution Or Special Power Of Attorney, Whichever Is Applicable]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For And In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. Select One, Delete The Rest: If A Sole Proprietorship: The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Partnership Or Cooperative: None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Corporation Or Joint Venture: None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Following Responsibilities As A Bidder: A) Carefully Examine All Of The Bidding Documents; B) Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C) Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D) Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay, Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Of Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling(estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 Series Of 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This ___________ Day Of __________________, 2024 At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory [insert Signatory’s Legal Capacity] Affiant Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. ______________ Page No: ______________ Book No. ______________ Series Of 2024. Republic Of The Philipppines ) City Of Sorsogon ) S.s. X ---------------------------------------------------x Bid Securing Declaration Project Identification No. ______ To: [insert Name And Address Of Procuring Entity] I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid-securing Declaration. 2. I/we Accept That: (a) I Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of Two(2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen(15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1(f) Of The Irr Of Ra No. 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid-securing Declaration Shall Cease To Be Valid On The Following Circumstances: (a) Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; (b) I Am Declared Ineligible Or Post Disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; And (c) I Am/we Declared As The Bidder With The Lowest Calculated And Responsive Bid And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I Have Hereunto Set My Hand This _____ Day Of ________, 2024 At __________________. _____________________________________ Bidder’s Representative/authorized Signatory [insert Signatory’s Legal Capacity] Affiant Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. __________ Page No. __________ Book No. __________ Series Of 2024. Bid Form For The Procurement Of Goods (shall Be Submitted With The Bid) Bid Form Date: _____________________________ Project Identification No.: _____________ To: [name And Address Of Procuring Entity] Having Examined The Philippine Bidding Documents(pbds) Including The Supplemental Or Bid Bulletin Numbers_____, The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To (supply/deliver/perform) (description Of The Goods) In Conformity With The Said Pbds For The Sum Of (total Bid Amount In Words And Figures) Or The Total Calculated Bid Price, As Evaluated And Corrected For Computational Errors , And Other Bid Modifications In Accordance With The Price Schedules Attached Herewith And Made Part Of This Bid. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To (specify The Applicable Taxes, E.g. (i) Value Added Tax, (ii) Income Tax, (iii) Local Taxes, And (iv) Other Fiscal Levies And Duties), Which Are Itemized Herein Or In The Price Schedules. If Our Bid Is Accepted, We Undertake: A.to Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements Of The Philippine Bidding Documents(pbds); B. To Provide A Performance Security In The Form, Amounts, And Within The Times Prescribed In The Pbds; C. To Abide By The Bid Validity Specified In The Pbds And It Shall Remain Binding Upon Us At Any Time Before The Expiration Of That Period. Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/conform That We Comply With The Eligibility Requirements Pursuant To The Pbds. The Undersigned Is Authorized To Submit The Bid On Behalf Of (name Of The Bidder) As Evidenced By The Attached (state The Written Authority). We Acknowledge That Failure To Sugn Each And Every Page Of This Bid Form, Including, The Attached Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Name: Legal Capacity: Signed: Duly Authorized To Sign The Bid For And On Behalf Of: Date: ___________ Contract Agreement For The Procurement Of Goods(revised) __________________________________________________________________________ This Agreement, Made The _________ Day Of _______________, ________ Between [name And Address Of Procuring Entity] Of The Philippines (hereinafter Called The“entity”) Of The One Part And [name Of Supplier] (hereinafter Called The “supplier”) Of The Other Part. Whereas, The Entity Invited Bids For Certain Goods And Ancillary Services, Particularly (brief Description Of Goods And Services) And Has Accepted A Bid By The Supplier For The Supply Of Those Goods And Services In The Sum Of (contract Price In Words And Figures In Specified Currency) (hereinafter Called The “contract Price”). Now This Agreement Witnesseth As Follows: 1. In This Agreement, Words And Expressions Shall Have The Same Meanings As Are Respectively Assigned To Them In The Conditions Of Contract Hereinafter Referred To. 2. The Following Documents As Required By The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 Shall Be Deemed To Form And Be Read And Construed As Part Of This Agreement, Viz.: I. Philippine Bidding Documents(pbds) I. Schedule Of Requirements; Ii.technical Specifications; Iii.bill Of Quantities Iv.general And Special Conditions Of Contract; V.supplemental Or Bid Bulletins, If Any Ii. Winning Bidder’s Bid, Including The Eligibility Requirements, Technical And Financial Proposals, And All Other Documents Or Statements Submitted; Bid Form, Including All The Documents/statements Submitted; Bid Form, Including All The Documents/statements Contained In The Bidder’s Bidding Envelopes, As Annexes, And All Other Documents Submitted(e.g., Bidder’s Response To Request For Clarifications On The Bid), Including Corrections To The Bid, If Any, Resulting From The Procuring Entity’s Bid Evaluation; C. Performance Security D. Notice Of Award Of Contract And The Bidder’s Conforme Thereto; And E. Other Contract Documents That May Be Required By Existing Laws And/or The Procuring Entity Concerned In The Pbds. Winning Bidder Agrees That Additional Contract Documents Or Information Prescribed By The Gppb That Are Subsequently Required For Submission After The Contract Execution, Such As The Notice To Proceed, Variation Orders And Warranty Security, Shall Likewise Form Part Of The Contract. 3. In Consideration For The Sum Of [total Contract Price In Words And Figures) Or Such Other Sums As May Be Ascertained, [name Of Bidder] Agrees To Execute The [state The Object Of The Contract] In Accordance With His/her/its Bid. 4. The [name Of The Procuring Entity] To Pay The Above-mentioned Sum In Accordance With The Terms Of Bidding. In Witness, Whereof The Parties Thereto Have Caused This Agreement To Be Executed The Day And Year First Before Written. Binding Signature Of The Procuring Entity: Binding Signature Of Supplier: Insert Name And Signature] [insert Name And Signature] [insert Signatory’s Legal Capacity] [insert Signatory’s Legal Capacity] Signed In The Presence Of: ______________________ ________________ Lorenzo G. Ubalde Liaison Officer For: For: [insert Procuring Entity] [insert Name Of Supplier] Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. ______________ Page No: ______________ Book No. ______________ Series Of 2024. Bill Of Quantities Item No. Item Quantity Unit Unit Price Total Price Prepared By: ______________ Proprietor Technical Specifications Item No. Item Statement Of Compliance (comply/not Comply) Prepared By: ______________ Proprietor

Details: The contracting entity sets up a dynamic purchasing system that will be entered in to acquire the transport services required by the subscriber.” Transporters are not automatically involved in the procurement system, but they must apply for it separately and agree to the requirements and the terms. The purpose of the Transportation Service is to primarily fill the dynamic purchasing system. “All traffic controllers who wish to handle Personal and Short-Traffic Transports, as well as Transports mentioned in the Later Stage Other Description of Services, must be registered in this Purchase System during its Termination. The first application for a dynamic purchasing system ended on 31 July 2020 at 16:00. On the basis of the incoming Offers, the Board of Directors will make the first Applicant Decision during August 2020.” “Dynamic Procurement System may submit Applications for the entire Duration of the Library on the Offer Service.fi website. The duration of the dynamic purchasing system is 60 K. "Subscriber Accepted to the dynamic purchasing system All applicants submitting applications who comply with the Applicant'stuability requirements. Applicability requirements Described in the Espd form, Section of the transfer plus Other Terms and Prices and Terms in the Appendix and Service Description Annex.

Details: Hansel Ltd’s aim is to establish a dynamic purchasing system, which is targeted at the User Services of the premises and the provision of complementary or separate supplementary services as defined by the Customer in the performance plug-in Terms and Conditions for Customers in the Customer’s Accounts or Defined by the Customer”, “The user services of the premises may be tailored to the operating environment only as a result of the Sharing Services” Cleaning services and Services Assistant Tasks.", "Cleaning Services Contain: ""; Maintenance and Basic Cleanings"; Separate Order Additional Services" The acquisjen and distribution of goods and services associated with the cleaning task (such as the acquista of sanitary supplies and dishwasher materials) Separately subscribed Maintenance and Fundamental Services, such as Custody Services Caused by Orders » » • Procurement and/or Pro Lisä Supplementary Services, such as Exchange Service, Customer’s Own Own carpet maintenance service, Transportation of Collection Paper to Waste Collection Point, Proning of Data Protection Maäls and Disposing of Requirements Inher, Wheel Services Services » “Security services may be Mm. ”; Aula, Reception, Office Support and Guardian Services”; “Safety and Awakening Services”; “Supporting of Safety and Awakening”; “Local or Circulating Guards”; “Safetytarkastus”; “Safety Checks”; “Asssistant Doctors Can Be Mm

Details: Description Lot 1 Education / English / Pe / Nstp 01783 2 Pcs A Modular Approach In Advanced Writing By Pagalilauan 2023 01784 2 Pcs A Modular Approach To Teaching Grammar And Composition 1 - Form, Meaning And Use By Manuel 2022 01785 2 Pcs Ang Bayani - The Life, Works, Writings And Travels Of Dr. Jose P. Rizal By Ayson 2022 01786 2 Pcs Character Formation 1 Nationalism And Patriotism By Caballero/ Barican 2023 01787 2 Pcs Character Formation 1 Nationalism And Patriotism By Tancangco 2022 01788 2 Pcs Character Formation 2 Leadership, Decision Making, Management And Administration By Caballero/ Barican 2023 01789 2 Pcs Character Formation 2 Leadership, Decision Making, Management And Administration By Garcia 2022 01790 2 Pcs Drills And Exercises For Intensive English By Josue 2023 01791 2 Pcs Environmental Science For All By Cobar 2022 01792 2 Pcs Gender And Society - We Are Equal By Florendo 2022 01793 2 Pcs Learning Modules For Research Writing By Lacaba/ Abadiano 2022 01794 2 Pcs Purposive Communication By Mariveles 2021 01795 2 Pcs Purposive Communication In Diverse Contexts By Josue 2023 01796 2 Pcs English For Purposive Communication (a Modular Approach Rev. Ed.) By Jaime Ang 2023 01797 2 Pcs Purposive Communication, Revised Edition By Zoleta 2023 01798 2 Pcs Nstp 1 Guide To Civic Welfare Training Service By Lonez 2023 01799 2 Pcs Nstp 2 Citizen Empowerment Towards Community Building By Santos 2023 01800 2 Pcs (path Fit 1) Physical Activity Towards Health And Fitness 1 Health & Wellness Movement Educ. & Exercise Program By Bulatao Et Al 2021 01801 2 Pcs (path – Fit 2) Physical Activity Towards Health And Fitness Combative Sports And Outdoor Recreational Activities By Bulatao Et Al 2023 01802 2 Pcs (path Fit 3 Dance) Physical Activity Towards Health And Fitness: Folk Dance, Cheer Dance, Contemporary Dances, Street Dance, Hip Hop, Social Dances By Bulatao Et Al 2022 01803 2 Pcs (path Fit 4) Sports) Individual/ Dual And Team Sports By Bulatao Et Al 2023 01804 2 Pcs (path Fit 1) Physical Activity Towards Health And Fitness 1 Health & Wellness Movement Educ. & Exercise Program By Punzalan, Habana 2023 01805 2 Pcs (path Fit 2) Physical Activity Towards Health And Fitness Rhytmic Dance And Social Activities By Punzalan, Habana 2024 01806 2 Pcs (path-fit 3) Menu Dance: Physical Activity Towards Health And By Punzalan 2023 01807 2 Pcs (path-fit 4 Sports) Menu Of Sports By Punzalan Et Al 2024 01808 2 Pcs Physical Education And Health: Aquatic (basic Swimming) And Mountaineering /revised Ed By Latorre 2023 01809 2 Pcs #borderless Purposive Communication In The 21st Century By Cayaban, Et.al. 2022 01810 2 Pcs Epr: English Proficiency For Empowered Professionals By Santillana, Et Al. 2023 01811 2 Pcs Essentials Of Purposive Communication By Caudilla 2023 01812 2 Pcs Essentials Of Workplace-readiness Skills By Caudilla 2023 01813 2 Pcs Purposive Communication In The Now, 2nd Edition By A.c. Africa 2022 01814 2 Pcs Promoting Community Change Through Civic Welfare Training Service 2 By Briones, Et.al. 2024 01815 2 Pcs Empowering The Youth For Nation Building Through Civic Welfare Training Service 1 By Briones, Et.al. 2022 01816 2 Pcs Nstp Cwts 2: A Textbook For The New General Education Curriculum By Dela Cruz, Et.al. 2022 01817 2 Pcs Movement Literacy And Engagement - A Text And Workbook For Physical Activity Towards Health And Fitness (path Fit) 1 By Cobar /dimarucot 2022 01818 2 Pcs Physical Activities Towards Health And Fitness Pathfit 2 (exercise-based Fitness Activities) By Ballecer, Et. Al. 2023 Lot 2 Business 01819 2 Pcs Professional Salesmanship By Mecmack Nartea 2024 01820 2 Pcs Financial Management By Jovelyn Q. Yu Stevenson Q. Yu 2024 01821 2 Pcs Marketing Research By Baniline Jone V. Abantao 2024 01822 2 Pcs Marketing Management By Baniline Jone V. Abantao 2024 01823 2 Pcs Organizational Management By Maria Victoria U. Sy 2024 01824 1 Pcs Strategic Business Analysis By Eunice Mareth Q. Areola Fernando V. Trinidad Ramoncito P. Javier 2023 01825 1 Pcs Strategic Management By Competitiveness & Globalization (concepts & Cases) Cengage Michael A. Hitt R.duane Ireland Robert E. Hoskisson 2022 01826 1 Pcs Economic Development By Emerson G. Cabudol 2022 01827 1 Pcs The Fundamentals Of Taxation By Hector S. De Leon Hector S. De Leon, Jr. 2022 01828 1 Pcs Governance, Business Ethics, Risk Management & Internal Control By Jesse Rey. L. Meneses Eugenio V. Villaceran 2022 01831 1 Pcs Sun Zi's Art Of War And Business Strategies By Law Et.al. 2023 01832 1 Pcs Advanced Human Behavior Organization With Ethics By Abante, Et, Al. 2024 01833 1 Pcs "advanced Human Resource Management For Private And Government By Abante, Et, Al. 2024" 01834 1 Pcs "advanced Local Government And Regional Administration Development By Abante, Et, Al. 2024" 01835 1 Pcs Advanced Marketing Management By Abante, Et, Al. 2024 01836 1 Pcs Advanced Production And Operations Management By Abante, Et, Al. 2024 01837 1 Pcs "advanced Public Fiscal Management, Finance And Accounting By Abante, Et, Al. 2024" 01838 1 Pcs Advanced Strategic Management By Abante, Et, Al. 2024 01839 1 Pcs Banking And Financial Institutions By Bairan 2024 01840 1 Pcs Basic Financial Management In The Philippine Setting By Martin 2022 01841 1 Pcs Capital Markets By Bairan 2024 01842 1 Pcs Corporate Social Responsibility By Viernes 2022 01843 1 Pcs Credit And Collection By Flores 2023 01844 1 Pcs Entrepreneurship 2022 Edition By Frias, Banastao 2022 01845 1 Pcs Entrepreneurial Mindset By Serrano 2022 01846 1 Pcs Essentials Of Administrative Office Management By Sergote 2022 01847 1 Pcs Essentials Of Risk Management By Banaag 2024 01848 1 Pcs Facilities Planning & Management, 2/e By Serrano 2024 01849 1 Pcs Financial Analysis And Reporting By Bairan 2024 01850 1 Pcs Financial Management By Acierto, Et, Al. 2022 01851 1 Pcs Financial Markets By Bairan 2024 01852 1 Pcs "fundamentals Of Accounting Volume I: Service And Merchandise By Arriola 2024" 01853 1 Pcs "fundamentals Of Accounting Volume Ii: Partnership And Corporation By Arriola 2024" 01854 1 Pcs Fundamentals Of Management By Martin 2022 01855 1 Pcs Fundamentals Of Performance Management By Dela Cruz 2022 01856 1 Pcs Income & Business Taxation By Bairan 2024 01857 1 Pcs Internet Marketing By Acierto 2022 01858 1 Pcs Introduction To Project Management By Abante, Et, Al. 2023 01859 1 Pcs Inventory Management And Control, 2e By Banaag, Et,al. 2023 01860 1 Pcs Labor Laws And Social Legislation, 2e By Peñaflor, Peñaflor 2023 01861 1 Pcs Labor Relations Management And Negotiations, 2e By Serrano, Ducut 2023 01862 1 Pcs Methods Of Research In Business Education, 2e By Flores 2023 01863 1 Pcs Microeconomics: Theories And Applications 2/ed. By Marcelo 2023 01864 1 Pcs Organization Development, 2e By Flores 2023 01865 1 Pcs Pricing Strategy By Acierto 2022 01866 1 Pcs Productivity And Quality Management, 2/e By Serrano 2024 01867 1 Pcs Professional Salesmanship By Serrano 2023 01868 1 Pcs Retail And Wholesale Enterprises By Bairan 2024 01869 1 Pcs Strategic Operations Management, 2/e By Serrano 2024 01870 1 Pcs Synergizing E-commerce Social Media And Dropshipping By Garcia, Et, Al. 2023 01871 1 Pcs Textbook In Auditing Practice 2021 Edition By Frias 2022 01872 1 Pcs Textbook In Business Finance, 3/ed. By Frias 2023 01873 1 Pcs Total Quality Management, 2/ed. By Serrano 2023 01874 1 Pcs Training And Development, 2e By Serrano, Ducut 2023 01875 1 Pcs Understanding Marketing Reserch By Mutya 2024 01876 1 Pcs Basic Financial Management By Pineda 2022 01877 1 Pcs Business Principles And Merchandising Accounting By Pasahol Et Al 2024 01878 1 Pcs Entrepreneurship By Marcelo, Samson 2022 01879 1 Pcs Essentials In Law On Obligations And Contracts ( For Abm Students By Atty. T. Cagurangan, 2022 01880 1 Pcs Entrepreneurial Behavior Growth Mindset And Fixed Mindset By Pasahol Et Al 2024 01881 1 Pcs Entrepreneurial Management By Ybanez 2024 01882 1 Pcs Foundations Of Operations Management: A Practical Guide For Higher Learning By Perida, Arcadio 2024 01883 1 Pcs Intelligent Leadership Resilience By Perida, Arcadio 2024 01884 1 Pcs Introduction To Consummer Behavior By Pasahol 2024 01885 1 Pcs Microeconomics Numerical And Computational Approach By Paurom 2024 01886 1 Pcs Navigating The Landscape Of Marketing Research By Pasahol, Et Al 2024 01887 1 Pcs Principles Of Total Quality Management By Pasahol, Et Al 2024 01888 1 Pcs Statistical Analysis For Business By Sirug 2023 01889 1 Pcs The Evolving Landscape Of Strategic Management And Leadership By Perida, Arcadio 2024 01890 1 Pcs Business Is Business, 2e By Munalim 2023 01891 1 Pcs Human Resource Management By Pingol 2024 01892 1 Pcs Strategic Business Analysis With Management By Palma / Simbillo 2023 01893 1 Pcs Strategic Management By Austria, Et Al. 2024 Lot 3 Business Law 01894 2 Pcs Labor Relations And Negotiations By Cecilio Duka 2024 01895 1 Pcs The Law On Obligations And Contracts By Andrix D. Domingo 2023 01896 2 Pcs Reg Framework And Legal Issues In Business 2 By Andrix D. Domingo 2023 01897 2 Pcs The Law On Income Taxation By Hector S. De Leon, Sr. Hector S. De Leon, Jr. 2022 01898 1 Pcs The Law On Transfer And Business Taxation By Hector S. De Leon, Sr. Hector S. De Leon, Jr. 2022 Lot 4 Criminology 01899 2 Pcs Juvenile Delinquency & Juvenile Justice System By Gerry J. Caño Roan Salon 2024 01900 2 Pcs Criminal Law 1 By The Revised Penal Code (book I) Andrix Domingo 2023 01901 2 Pcs Criminological Research And Statistics I: A Textbook For Criminology Students By Gerry J. Caño Richard T. Camara Laurence P. Bazan 2023 01902 2 Pcs Essentials Of Marksmanship And Combat Shooting By Dario F. Guinayen 2022 01903 2 Pcs Human Rights Education For Criminal Justice By Rago, Blancaflor 2022 01904 2 Pcs Instructional Material In Theories Of Crime Causation By Dumapi Et Al 2023 01905 2 Pcs Special Crime Investigation 1 With Legal Medicine Instructional Modules By Rago, Arnold 2022 01906 2 Pcs Technical English (investigative Report Writing) For Criminology Students By Zaspa 2022 01907 2 Pcs Introduction To Philippine Criminal Justice System 2nd Edition By Guerrero 2023 01908 2 Pcs Criminal Justice System - The Philippine Context By Tulalian 2022 01909 2 Pcs Primer To The Philippine Criminal Justice System By Hibionada/ Guevara 2022 01910 2 Pcs Understanding Human Rights And International Humanitarian Law : Human Rights Education 2nd Edition By Dela Cruz 2023 01911 2 Pcs Human Rights Education - A Textbook For Criminal Justice Education Students And Law Enforcers By Tancangco /orlain 2022 01912 2 Pcs The Revised Penal Code Book I - Understanding Criminal Law 2nd Edition By Tulalian 2024 01913 2 Pcs Fundamentals Of Criminal Law - Revised Penal Code Book 1 By Abastillas /manlusoc 2023 01914 2 Pcs The Revised Penal Code Book Ii, Specific Crimes And Their Elements 2nd Edition By Tulalian 2024 01915 2 Pcs Student's Manual On Evidence With Study Helps 2nd Edition By Tulalian 2022 01916 2 Pcs Criminal Procedure A Handbook For Criminology Students 3rd Edition By Gabao/ Tulalian 2024 01917 2 Pcs Basic Criminal Procedure By Tulalian 2022 01918 2 Pcs Gender And Society - We Are Equal By Florendo 2022 01919 2 Pcs Special Penal Laws Volume Ii By Tulalian 2022 01920 2 Pcs Forensic Science 1 - Forensic Photography Laboratory Manual By Cabrillas/ Abelleja 2023 01921 2 Pcs Forensic Photography For Criminology Students And Practitioners With Laboratory Manual 3rd Edition By Villarba 2022 01922 2 Pcs Laboratory Manual In Forensic Chemistry 2nd Edition By Rondina 2023 01923 2 Pcs Forensic Chemistry & Toxicology Worktext 3rd Edition By Dascil 2021 01924 2 Pcs Handbook/manual In Forensic Chemistry Revised Edition By Francisco 2018 01925 2 Pcs Forensic Science 4 Questioned Documents Examination Laboratory Manual By Cabrillas/ Abelleja 2023 01926 2 Pcs Forensic Document Examination - A Handbook For Criminology Faculty And Students With Laboratory And Mock Board Exercises By Alviola 2022 01927 2 Pcs Laboratory Manual Lie Detection Techniques By Lotivo 2023 01928 2 Pcs Forensic Ballistics Or Firearms Identification - Lecture With Laboratory Exercises By Magtaan/ Cabrillas 2023 01929 2 Pcs Criminal Law Book Ii (the Revised Penal Code) By Andrix D.domingo 2022 01930 2 Pcs Theories Of Crime And Causation: Concepts, Policy Implications, And Research Focus By Charesma Grace K. Lud-ayen Elvira D. Bersabal Edwin Q. Cerna Jessica V. Doctolero Emmalyn F. Acorda Nissan B. Ramirez Ruben M. Narrazid Jr. Joe Mary D. Ruizan Bronson L. Peckley Marcel B. Atianzar 2023 01931 2 Pcs Reading Visual Arts By Elaine Grace J. Dizon 2022 01932 2 Pcs A Course Module For National Service Training Program Ii By Raphael M. Ferrer Eric Paul D. Peralta Herald Ian C. Guiwa Eugene Raymond P. Crudo Coordinator: Greg Tabios Pawilen 2024 01933 2 Pcs A Course Module For National Service Training Program I By Raphael M. Ferrer Eric Paul D. Peralta Herald Ian C. Guiwa Eugene Raymond P. Crudo Coordinator: Greg Tabios Pawilen 2023 Lot 5 Ge - General Education 01934 2 Pcs Art Appreciation, 2/ed. By Sanchez, Et, Al. 2023 01935 2 Pcs Ethics By Bacolod, Et, Al. 2023 01936 2 Pcs Mathematics In The Modern World By Reyes 2023 01937 2 Pcs Readings In Philippine History By Bacolod, Et, Al. 2023 01938 2 Pcs The Life And Works Of Rizal By Ariola 2024 01939 2 Pcs Understanding The Self By Luna 2022 01940 2 Pcs Environmental Science A Modular Approach By Cadiz 2021 01941 2 Pcs Science, Technology & Society By Tabotabo, Corpuz 2023 01942 2 Pcs General Chemistry 2 By Reyes, Reyes 2024 01943 2 Pcs "pagbasa At Pagsusuri Ng Iba't-ibang Teksto Tungo Sa Pananaliksik By Sanchez 2023" 01944 2 Pcs Personal Development, 2e By Serrano 2022 01945 2 Pcs "philippine Politics And Governance With 1987 Philippine Constitution By Sanchez, Et, Al. 2023" 01946 2 Pcs Understanding Culture, Society And Politics, 2e By Mendoza, Garcia 2022 01947 2 Pcs An Eye For Art Appreciation: Perception And Expression, 2nd Edition By Sonsona, Et Al. 2024 01948 2 Pcs Art Appreciation By Etm Solmerano 2023 01949 2 Pcs Introduction To Ethics By Umali, Et Al 2023 01950 2 Pcs Unraveling The Absolute Moral Principle: Ethics For College Students, Rev.ed. By L.e. Buenaflor, Et Al 2024 01951 2 Pcs Facilitating Student-centered Teaching & Learning By Larioque, Et Al. 2024 01952 2 Pcs Leveling Up Your Personality Sevenfold Components A Practical Guide By Albina Sacramento Bunyi 2022 01953 2 Pcs The Student-trainee's Guide To The Internship Program: An Outcomes-based Education Approach By Ampo, Et.al. 2022 01954 2 Pcs The Teacher And The School Curriculum By Fernando ; Oamil 2022 01955 2 Pcs The Teaching Profession By Fernando, Et Al 2024 01956 2 Pcs Science, Technology And Society, 2nd Edition By K.a. Aldea, Et Al 2022 01957 2 Pcs Understanding The Self: New Normal Edition By Palean, Et Al. 2024 01958 2 Pcs Art Of Self Discovery, The: An Understanding The Self Workbook-textbook By Villanueva ; Egargo 2023 01959 2 Pcs Gender And Society With Peace Education Towards An Inclusive Higher Education Perspective By Espinol, Et Al. 2023 01960 2 Pcs Exploring Gender And Society By Ecoben 2023 01961 2 Pcs Psychology And You By Milagros Frando ; Lalaine Isip 2022 01962 2 Pcs Understanding The Self, 2nd Edition By Milagros Frando ; Lalaine Isip 2022 Lot 6 Teacher - Education 01963 2 Pcs History Of Mathematics By John Mark Flores Bondoc Jhon Carlo Santiago Villa 2024` 01964 2 Pcs Teaching And Assessment Of Literature Studies By Maureen Domingo-bondoc Rodolfo Grefiel Reyes Ii 2024` 01965 2 Pcs Learners With Emotional Behavioral, Language, And Communication Disabilities By Cristina Rowena Salcedo-padilla Greg Tabios Pawilen Coordinator: Greg Pawilen 2024 01966 2 Pcs Pagtuturo Mula Sa Puso By Lydia Buenafe Liwanag 2023 01967 2 Pcs Technology For Teaching And Learning 1 By Ronato S. Ballado Marlo D. Alvarez Alejandro L. Giray Jr. 2023 01968 2 Pcs A Course Module For Science In Early Childhood Education By Joel Bernal Faustino Eden Joy Pastor Alata Antonnette Pawilen Coordinator: Greg Pawilen 2024 01969 2 Pcs History Of Mathematics By John Mark Flores Bondoc Jhon Carlo Santiago Villa 2024` 01970 2 Pcs Ethics And Values Especially For Law Enforcement Officers And Other Public Servants By Cabrera 2022 01971 2 Pcs Gender And Society By Florendo 2022 01972 2 Pcs Introduction To Psychology 2nd Edition By Pelayo 2022 01973 2 Pcs Learn And Enjoy Intermediate Statistics The Easy Way - Advanced Volume 2 Revised Edition By Uriarte 2024 01974 2 Pcs Learn And Enjoy Statistics The Easy Way - Basic Volume 1 Revised Edition By Uriarte 2024 01975 1 Pcs Learning General Psychology The Easy Way By Uriarte 2024 01976 1 Pcs Learning Research The Easy Way Revised Edition By Uriarte 2024 01977 1 Pcs Moral Philosophy And Ethics By Bacuyag 2024 01978 1 Pcs Assessment Of Learning 1 By Mañas 2024 01979 1 Pcs Introduction To Research By Sergote 2024 01980 1 Pcs Research Writing Made Easy By Basilan 2022 01981 1 Pcs Teaching And Assessment Of Grammar By Mañas 2024 01982 1 Pcs The Teaching Profession By Gallardo, Mañas 2022 01983 1 Pcs "understanding Research Design And Methods: Basic Business Approach For Undergraduate Level By Siniguian, Et, Al. 2023" 01984 1 Pcs Gender And Society By Bacolod, Et, Al. 2024 01985 1 Pcs Values Education: Legal And Ethical Perspective, 2e By Peñaflor, Peñaflor2023 01986 1 Pcs Introduction To The Humanities & Visual Performing Arts Rev.ed. By :marcos 2021 01987 1 Pcs Gender And Society By Martinez 2022 01988 1 Pcs Professional Development A Guide To Career Success By Magalona Et Al 2023 01989 1 Pcs Understanding The Self Developing Life Skills Obe Revised Edition By Magalona Et Al. 2023 01990 1 Pcs Research 101 Notes And Style Guide In Thesis And Dissertation Writing For The Filipino Students By Ang, Jaime 2022 01991 1 Pcs Thesis And Development Writing Made Easy By Mendoza Et Al. 2023 01992 1 Pcs Special Education Book 1 By Reyes, Pascual 2024 Lot 7 Hrm-tourism 01993 2 Pcs Applied Business Tools And Technologies In Hotel And Restaurant Management (hrm) By Richard Philip A. Gonzalo Calixto Obong Jr. 2023 01994 2 Pcs Professional Development And Applied Ethics By Danny A. Cabulay 2023 01995 2 Pcs Fundamentals In Lodging Operations By Sarah Monzon-po 2023 01996 2 Pcs Foreign Language Ii By (basic French For Hospitality Management And Tourism I) Ma. Gladys G. Tomas 2022 01997 2 Pcs Foreign Language I By (basic French For Hospitality Management And Tourism I) Ma. Gladys G. Tomas 2022 01998 2 Pcs Tourism Policy Planning And Development By Reil G. Cruz 2022 01999 2 Pcs Fundamentals In Food Service Operations By Claire Ann Yao 2022 02000 2 Pcs Supply Chain Management In Hospitality Industry By Michael Bhobet B. Baluyot 2022 02001 2 Pcs Transportation Management By Lynn U. Donesa Lilibeth C. Aragon Maria Cristina N. Asuncion April Grace M. Sacueza 2022 02002 1 Pcs "applied Business Tools And Technologies In Tourism And Hospitality By Rodolfa 2022" 02003 1 Pcs "basic Understanding To Hospitality And Tourism Marketing With Imc By Velasco, Javier, Perez 2024" 02004 1 Pcs Events Management, 2/ed. By Dela Cruz 2024 02005 1 Pcs "risk Management As Applied To Safety, Security, & Sanitation, 2e By Somoray 2023" 02006 1 Pcs Workbook On Customs Law By Roxas 2023 02007 1 Pcs (advanced Mandarin Language Course) 汉语进阶课 By Cr. G. Go 2022 02008 1 Pcs 21st Century Risk Management With Sanitation By De La Cruz 2023 02009 1 Pcs Bar And Beverage Service 3rd Edition Tesda Bartending Nc Ii Core Competencies And Elective Competencies Based Edition By Rojo 2022 02010 1 Pcs Commercial Baking With Enterpreneurship Leading To Bread & Pastry Production Nc Ii Revised Edition By Dinaga 2022 02011 1 Pcs Cruise Tourism By Escabillas 2022 02012 1 Pcs Culinary Nutrition The Science And Art Of Healthy Cooking By Natad 2023 02013 1 Pcs Events Management: Introduction To Meetings, Incentives, Conference, Exhibitions (mice), Festivals & Other Special Events By B.rodolfa 2022 02014 1 Pcs Entrepreneurship In Tourism And Hospitality By Marcelo, Samson 2022 02015 1 Pcs Ergonomics Facilities Planning For The Hospiltality Industry By Buenaventura 2023 02016 1 Pcs Front Office Systems And Procedures / Revised Edition By Lago, Lim 2024 02017 1 Pcs Fundamentals Of Food Service In Operation By R. Dela Cruz 2022 02018 1 Pcs Hajimemashou Learn Basic Japanese By Rea-dafun, M. 2022 02019 1 Pcs Introduction To Culinary Arts By Lago, Pauig 2022 02020 1 Pcs Legal Aspects In Tourism & Hospitality (the Philippine Tourisms Laws Simplified) By Atty. T. Cagurangan, 2022 02021 1 Pcs Leisure And Recreation Management For Tourism And Hospitality Industry By Cornell 2023 02022 1 Pcs Multicultural Diversity In The Tourism And Hospitality Workplace: A Comprehensive Guide For Professionals By Maranan Et Al 2024 02023 1 Pcs Operations Management In Tourism And Hospitality By Buenaventura Et Al 2023 02024 1 Pcs Professional Development A Guide To Career Success By Magalona Et Al 2023 02025 2 Pcs Professional Development And Applied Ethics By Buenaventura Et Al 2022 02026 1 Pcs Practicum Manual College Of Hospitality And Tourism Management By Banzuelo Et Al 2022 02027 2 Pcs Practicum Manual For Tourism And Hospitality Management By Taoing, Cabugon 2023 02028 1 Pcs Strategic Management In Tourism & Hospitality Industry By Buenventura Et Al 2024 02029 1 Pcs Sustainable Tourism By M.g. Santos 2023 02030 1 Pcs Sustainable Tourism: A Comprehensive Guide To Promoting Responsible Travel By Maranan Et Al 2024 02031 1 Pcs Tourism & Hospitality Marketing By Buenaventura 2022 02032 1 Pcs Western Cuisine By Dinaga, Lirazan, Banzuelo 2022 02033 1 Pcs Bread And Pastry Production Nc Ii By Prades 2022 02034 1 Pcs Introduction To Meetings, Incentives, Conventions, Exhibitions (mice) And Special Events Management For Tourism And Hospitality By Disimulacion 2022 02035 1 Pcs Kitchen Essentials And Basic Food Preparation By Remaneses, Et Al. 2023 02036 1 Pcs Passion To Bake - Baking Guide For Beginners (revised Ed.) By E.v. Gabriel 2023 02037 1 Pcs Quantity Cookery And Catering Management (a Guide To Students, Leading To Commercial Cooing Nc Iii) By Corazon Barateta-prades 2023 Lot 8 -computer 02038 1 Pcs Angular Js Programming For Beginner's By Pomperada 2022 02039 1 Pcs Data Analysis & Business Intelligence By Abante, Et, Al. 2023 02040 1 Pcs Empowerment Technologies By Abante, Et, Al. 2024 02041 1 Pcs Empowerment Technologies By Pomperada, Castellano 2023 02042 1 Pcs Fundamentals Of Information Management By Pomperada 2023 02043 1 Pcs Information Assurance And Security Book 1 By Pomperada 2023 02044 1 Pcs Information Assurance And Security Book 2 By Pomperada 2023 02045 1 Pcs Information Management By Cortez 2023 02046 1 Pcs "introduction To Application Development And Emerging Technologies By Pomperada 2023" 02047 1 Pcs Introduction To Artificial Intelligence By Pomperada 2024 02048 1 Pcs Introduction To Computer Programming With Java By Pomperada 2022 02049 1 Pcs Introduction To Cybersecurity By Pomperada, Castellano 2023 02050 1 Pcs Introduction To Go Programming By Pomperada 2022 02051 1 Pcs Introduction To Information Technology And Computer Fundamentals, 2e By Besueña, Pomperada 2023 02052 1 Pcs Introduction To Scala Programming By Pomperada 2022 02053 1 Pcs Introduction To Software Engineering By Pomperada, Castellano 2023 02054 1 Pcs Living In The Information Technology Era By Abante 2023 02055 1 Pcs System Integration And Architecture 1 By Abante, Et, Al. 2024 02056 1 Pcs System Integration And Enterprise Architecture 2 By Abante, Et, Al. 2024 02057 1 Pcs Advance Management Information System By Abante, M.v. 2023 02058 1 Pcs Computer Fundamentals By Revano 2023 02059 1 Pcs Information Assurance And Security 1&2 By Abante Et Al 2022 02060 1 Pcs Introduction To Human Computer Interaction By Revano, Laviña 2023 02061 1 Pcs Introduction To Java Programming 3rd Edition By Pomperada 2024 02062 1 Pcs Outcomes-based Practical Guide To Thesis And Capstone Project Writing In Computing By Laviña Et Al 2022 02063 1 Pcs Web Applications Using Php & Mysql By Pahayahay 2024 02064 1 Pcs Worktext In Basic And Advanced Keyboarding By San Luis 2024 Lot 8 -filipino 02065 2 Pcs Introduksiyon Sa Pananaliksik Sa Wika At Panitikan (luzon) By Alvarado Et Al 2022 02066 2 Pcs Introduksiyon Sa Pananaliksik Sa Wika At Panitikan (vizmin) By Arbasto Et Al 2022 02067 2 Pcs Introduksiyon Sa Pag-aaral Ng Wika (pandalubhasaan) - Luzon By Balawan Et Al 2021 02068 2 Pcs Introduksiyon Sa Pag-aaral Ng Wika (pandalubhasaan) - Vizmin By Canasa Et Al 2021 02069 2 Pcs Kontekstwalisadong Komunikasyon Sa Filipino Ikalawang Edisyon By Maranan 2023 02070 1 Pcs Panimulang Lingguwistika (pandalubhasaan) Luzon/vizmin By Lonez/ariaso Et Al 2021 02071 1 Pcs Introduction To Philippine Government & Politics With Basic Constitutional By Baes, Belter 2024 02072 1 Pcs Introduction To Philippine Government & Politics With Basic Constitutional Principles 2nd Ed. By Francisco Iii 2023 02073 1 Pcs Mga Babasahin Hinggil Sa Kasaysayan Ng Pilipinas By Ramos 2023 02074 1 Pcs Revisiting Readings In Philippine History By Baes, Francisco 2023 02075 1 Pcs The Life And Works Of Rizal By Balili Et Al. 2023 02076 1 Pcs Introduction To Public Administration, 2e By Bihasa, Cr. 2022 02077 1 Pcs Rizal And The Dev. Of Fil. Nationalism, 2e By Garcia, Et Al. 2023 02078 1 Pcs The Contemporary World: Looking Through The Lenses Of Globalization By Bihasa, Cr. 2022 02079 1 Pcs Ugat: Textbook In Readings In Philippine History By Salonga 2023 02080 1 Pcs Sanguniang Aklat Ng Gramatika At Pagbuo Ng Mapa By Alvarado Et Al 2023 Lot 9 -math 02081 2 Pcs Business Mathematics A Practical Approach 3rd Edition By Sirug 2023 02082 2 Pcs Introduction To Discrete Mathematics By Sirug 2023 02083 2 Pcs Management Science ( Quantitative Methods For Business / Operations Research ) By Sirug 2023 02084 2 Pcs Math Enhancement By Pagala 2023 02085 2 Pcs Mathematics Of Investment 4th Ed By Sirug 2023 02086 2 Pcs Mathematics Of The Modern World Revised Edition By Sirug 2023 02087 2 Pcs Mathematics Of The Modern World By Ogoy, Et Al. 2023 02088 1 Pcs Calculus 1, 2e By Vicencio, Et Al 2023